2018-01-19T21:09:01.039Z,1516396141.039 [Supervisor](DEBUG): Initializing supervisor.
2018-01-19T21:09:01.042Z,1516396141.042 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2018-01-19T21:09:01.042Z,1516396141.042 [SyncHandler](INFO): Protected caller Thread ID is 7959
2018-01-19T21:09:01.043Z,1516396141.043 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2018-01-19T21:09:01.043Z,1516396141.043 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2018-01-19T21:09:01.044Z,1516396141.044 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 7960
2018-01-19T21:09:01.046Z,1516396141.046 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2018-01-19T21:09:01.057Z,1516396141.057 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2018-01-19T21:09:01.058Z,1516396141.058 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2018-01-19T21:09:01.058Z,1516396141.058 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 7961
2018-01-19T21:09:01.059Z,1516396141.059 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2018-01-19T21:09:01.060Z,1516396141.060 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2018-01-19T21:09:01.060Z,1516396141.060 [logger ThreadHandler](INFO): Protected caller Thread ID is 7962
2018-01-19T21:09:01.062Z,1516396141.062 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2018-01-19T21:09:01.063Z,1516396141.063 [Supervisor](INFO): Looking for Config files in directory: Config/
2018-01-19T21:09:01.064Z,1516396141.064 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2018-01-19T21:09:01.240Z,1516396141.240 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2018-01-19T21:09:01.240Z,1516396141.240 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2018-01-19T21:09:01.372Z,1516396141.372 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2018-01-19T21:09:01.372Z,1516396141.372 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2018-01-19T21:09:01.675Z,1516396141.675 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2018-01-19T21:09:01.675Z,1516396141.675 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2018-01-19T21:09:01.803Z,1516396141.803 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2018-01-19T21:09:01.804Z,1516396141.804 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2018-01-19T21:09:01.883Z,1516396141.883 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2018-01-19T21:09:02.070Z,1516396142.070 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2018-01-19T21:09:02.071Z,1516396142.071 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2018-01-19T21:09:02.165Z,1516396142.165 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2018-01-19T21:09:02.166Z,1516396142.166 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2018-01-19T21:09:02.548Z,1516396142.548 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2018-01-19T21:09:02.548Z,1516396142.548 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2018-01-19T21:09:02.870Z,1516396142.870 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2018-01-19T21:09:02.871Z,1516396142.871 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2018-01-19T21:09:03.207Z,1516396143.207 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2018-01-19T21:09:03.208Z,1516396143.208 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2018-01-19T21:09:03.670Z,1516396143.670 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2018-01-19T21:09:03.671Z,1516396143.671 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2018-01-19T21:09:03.859Z,1516396143.859 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2018-01-19T21:09:03.860Z,1516396143.860 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2018-01-19T21:09:03.954Z,1516396143.954 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2018-01-19T21:09:03.955Z,1516396143.955 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2018-01-19T21:09:04.420Z,1516396144.420 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2018-01-19T21:09:04.421Z,1516396144.421 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2018-01-19T21:09:04.524Z,1516396144.524 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2018-01-19T21:09:04.526Z,1516396144.526 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-aku/
2018-01-19T21:09:04.527Z,1516396144.527 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Battery.cfg
2018-01-19T21:09:04.747Z,1516396144.747 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2018-01-19T21:09:04.748Z,1516396144.748 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/BIT.cfg
2018-01-19T21:09:04.858Z,1516396144.858 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Navigation.cfg
2018-01-19T21:09:04.957Z,1516396144.957 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Control.cfg
2018-01-19T21:09:05.051Z,1516396145.051 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Simulator.cfg
2018-01-19T21:09:05.136Z,1516396145.136 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Science.cfg
2018-01-19T21:09:05.280Z,1516396145.280 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Sensor.cfg
2018-01-19T21:09:05.438Z,1516396145.438 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Servo.cfg
2018-01-19T21:09:05.540Z,1516396145.540 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/logger.cfg
2018-01-19T21:09:05.634Z,1516396145.634 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/secure.cfg
2018-01-19T21:09:05.716Z,1516396145.716 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/vehicle.cfg
2018-01-19T21:09:05.873Z,1516396145.873 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-aku/root/
2018-01-19T21:09:05.873Z,1516396145.873 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2018-01-19T21:09:05.878Z,1516396145.878 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2018-01-19T21:09:06.008Z,1516396146.008 [SBIT](DEBUG): Construct Startup Built In Test.
2018-01-19T21:09:06.037Z,1516396146.037 [SBIT] Loaded
2018-01-19T21:09:06.037Z,1516396146.037 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2018-01-19T21:09:06.038Z,1516396146.038 [IBIT](DEBUG): Construct Initiated Built In Test.
2018-01-19T21:09:06.064Z,1516396146.064 [IBIT] Loaded
2018-01-19T21:09:06.064Z,1516396146.064 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2018-01-19T21:09:06.067Z,1516396146.067 [CBIT](DEBUG): Construct Continuous Built In Test.
2018-01-19T21:09:06.215Z,1516396146.215 [CBIT] Loaded
2018-01-19T21:09:06.215Z,1516396146.215 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2018-01-19T21:09:06.215Z,1516396146.215 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2018-01-19T21:09:06.216Z,1516396146.216 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2018-01-19T21:09:06.280Z,1516396146.280 [VerticalControl](DEBUG): Construct VerticalControl.
2018-01-19T21:09:06.376Z,1516396146.376 [VerticalControl] Loaded
2018-01-19T21:09:06.376Z,1516396146.376 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2018-01-19T21:09:06.377Z,1516396146.377 [HorizontalControl](DEBUG): Construct HorizontalControl.
2018-01-19T21:09:06.435Z,1516396146.435 [HorizontalControl] Loaded
2018-01-19T21:09:06.435Z,1516396146.435 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2018-01-19T21:09:06.435Z,1516396146.435 [SpeedControl](DEBUG): Construct SpeedControl.
2018-01-19T21:09:06.441Z,1516396146.441 [SpeedControl] Loaded
2018-01-19T21:09:06.441Z,1516396146.441 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2018-01-19T21:09:06.442Z,1516396146.442 [LoopControl](DEBUG): Construct LoopControl.
2018-01-19T21:09:06.442Z,1516396146.442 [LoopControl] Loaded
2018-01-19T21:09:06.443Z,1516396146.443 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2018-01-19T21:09:06.443Z,1516396146.443 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2018-01-19T21:09:06.444Z,1516396146.444 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2018-01-19T21:09:06.483Z,1516396146.483 [DepthRateCalculator] Loaded
2018-01-19T21:09:06.483Z,1516396146.483 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2018-01-19T21:09:06.488Z,1516396146.488 [PitchRateCalculator] Loaded
2018-01-19T21:09:06.489Z,1516396146.489 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2018-01-19T21:09:06.505Z,1516396146.505 [SpeedCalculator] Loaded
2018-01-19T21:09:06.505Z,1516396146.505 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2018-01-19T21:09:06.525Z,1516396146.525 [TempGradientCalculator] Loaded
2018-01-19T21:09:06.526Z,1516396146.526 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2018-01-19T21:09:06.540Z,1516396146.540 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2018-01-19T21:09:06.541Z,1516396146.541 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2018-01-19T21:09:06.545Z,1516396146.545 [YawRateCalculator] Loaded
2018-01-19T21:09:06.546Z,1516396146.546 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2018-01-19T21:09:06.546Z,1516396146.546 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2018-01-19T21:09:06.547Z,1516396146.547 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2018-01-19T21:09:06.627Z,1516396146.627 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2018-01-19T21:09:06.627Z,1516396146.627 [StratificationFrontDetector](DEBUG): (re)initializing
2018-01-19T21:09:06.627Z,1516396146.627 [StratificationFrontDetector] Loaded
2018-01-19T21:09:06.628Z,1516396146.628 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2018-01-19T21:09:06.628Z,1516396146.628 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2018-01-19T21:09:06.629Z,1516396146.629 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2018-01-19T21:09:06.866Z,1516396146.866 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2018-01-19T21:09:06.866Z,1516396146.866 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2018-01-19T21:09:07.146Z,1516396147.146 [DeadReckonUsingMultipleVelocitySources] Loaded
2018-01-19T21:09:07.146Z,1516396147.146 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2018-01-19T21:09:07.201Z,1516396147.201 [DeadReckonUsingSpeedCalculator] Loaded
2018-01-19T21:09:07.202Z,1516396147.202 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2018-01-19T21:09:07.254Z,1516396147.254 [DeadReckonWithRespectToSeafloor] Loaded
2018-01-19T21:09:07.254Z,1516396147.254 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2018-01-19T21:09:07.270Z,1516396147.270 [NavChart] Loaded
2018-01-19T21:09:07.270Z,1516396147.270 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2018-01-19T21:09:07.274Z,1516396147.274 [UniversalFixResidualReporter] Loaded
2018-01-19T21:09:07.274Z,1516396147.274 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2018-01-19T21:09:07.274Z,1516396147.274 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2018-01-19T21:09:07.275Z,1516396147.275 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2018-01-19T21:09:07.288Z,1516396147.288 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2018-01-19T21:09:07.288Z,1516396147.288 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2018-01-19T21:09:07.439Z,1516396147.439 [Aanderaa_O2] Loaded
2018-01-19T21:09:07.439Z,1516396147.439 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2018-01-19T21:09:07.485Z,1516396147.485 [CTD_Seabird] Loaded
2018-01-19T21:09:07.486Z,1516396147.486 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2018-01-19T21:09:07.487Z,1516396147.487 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 406D34E0
2018-01-19T21:09:07.487Z,1516396147.487 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 8041
2018-01-19T21:09:07.503Z,1516396147.503 [ESPComponent] Loaded
2018-01-19T21:09:07.503Z,1516396147.503 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread.
2018-01-19T21:09:07.517Z,1516396147.517 [PAR_Licor] Loaded
2018-01-19T21:09:07.517Z,1516396147.517 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2018-01-19T21:09:07.565Z,1516396147.565 [WetLabsBB2FL] Loaded
2018-01-19T21:09:07.565Z,1516396147.565 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2018-01-19T21:09:07.566Z,1516396147.566 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 407034E0
2018-01-19T21:09:07.566Z,1516396147.566 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 8042
2018-01-19T21:09:07.567Z,1516396147.567 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2018-01-19T21:09:07.567Z,1516396147.567 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2018-01-19T21:09:07.818Z,1516396147.818 [DataOverHttps] Loaded
2018-01-19T21:09:07.819Z,1516396147.819 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2018-01-19T21:09:07.831Z,1516396147.831 [Depth_Keller] Loaded
2018-01-19T21:09:07.832Z,1516396147.832 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2018-01-19T21:09:07.918Z,1516396147.918 [NAL9602] Loaded
2018-01-19T21:09:07.919Z,1516396147.919 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2018-01-19T21:09:07.923Z,1516396147.923 [Onboard] Loaded
2018-01-19T21:09:07.924Z,1516396147.924 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2018-01-19T21:09:07.930Z,1516396147.930 [Radio_Surface] Loaded
2018-01-19T21:09:07.931Z,1516396147.931 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2018-01-19T21:09:07.932Z,1516396147.932 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 409474E0
2018-01-19T21:09:07.932Z,1516396147.932 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 8043
2018-01-19T21:09:08.075Z,1516396148.075 [DAT] Loaded
2018-01-19T21:09:08.076Z,1516396148.076 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread.
2018-01-19T21:09:08.121Z,1516396148.121 [PNI_TCM] Loaded
2018-01-19T21:09:08.121Z,1516396148.121 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2018-01-19T21:09:08.122Z,1516396148.122 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2018-01-19T21:09:08.122Z,1516396148.122 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2018-01-19T21:09:08.216Z,1516396148.216 [BuoyancyServo] Loaded
2018-01-19T21:09:08.216Z,1516396148.216 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2018-01-19T21:09:08.227Z,1516396148.227 [ElevatorServo] Loaded
2018-01-19T21:09:08.228Z,1516396148.228 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2018-01-19T21:09:08.238Z,1516396148.238 [MassServo] Loaded
2018-01-19T21:09:08.238Z,1516396148.238 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2018-01-19T21:09:08.249Z,1516396148.249 [RudderServo] Loaded
2018-01-19T21:09:08.249Z,1516396148.249 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2018-01-19T21:09:08.260Z,1516396148.260 [ThrusterServo] Loaded
2018-01-19T21:09:08.260Z,1516396148.260 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2018-01-19T21:09:08.261Z,1516396148.261 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2018-01-19T21:09:08.261Z,1516396148.261 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2018-01-19T21:09:08.354Z,1516396148.354 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2018-01-19T21:09:08.355Z,1516396148.355 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2018-01-19T21:09:08.379Z,1516396148.379 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2018-01-19T21:09:08.382Z,1516396148.382 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2018-01-19T21:09:08.383Z,1516396148.383 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2018-01-19T21:09:08.390Z,1516396148.390 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2018-01-19T21:09:08.391Z,1516396148.391 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 409EE4E0
2018-01-19T21:09:08.391Z,1516396148.391 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 8044
2018-01-19T21:09:08.396Z,1516396148.396 [Supervisor](INFO): Main Thread ID is 5775
2018-01-19T21:09:08.396Z,1516396148.396 [Supervisor](DEBUG): Running supervisor.
2018-01-19T21:09:08.396Z,1516396148.396 [CommandLine ThreadHandler](INFO): Handler Thread ID is 8045
2018-01-19T21:09:08.410Z,1516396148.410 [controlThread ThreadHandler](INFO): Handler Thread ID is 8046
2018-01-19T21:09:08.411Z,1516396148.411 [controlThread](DEBUG): Initializing ControlThread
2018-01-19T21:09:08.412Z,1516396148.412 [SBIT](INFO): Initialize SBIT Component.
2018-01-19T21:09:08.412Z,1516396148.412 [SBIT](IMPORTANT): git: 2017-12-12-30-gb0f7ff6
2018-01-19T21:09:08.412Z,1516396148.412 [SBIT](INFO): git hash: b0f7ff6b53ac09de70ba82b711a5c931a61d8eb6
2018-01-19T21:09:08.413Z,1516396148.413 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-01-19T21:09:08.414Z,1516396148.414 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #2 PREEMPT Thu Jan 11 20:13:48 PST 2018
2018-01-19T21:09:08.415Z,1516396148.415 [SBIT](INFO): Beginning SBIT in 79.000000 seconds.
2018-01-19T21:09:08.415Z,1516396148.415 [IBIT](INFO): Initialize IBIT Component.
2018-01-19T21:09:08.416Z,1516396148.416 [CBIT](DEBUG): Initialize CBIT Component.
2018-01-19T21:09:08.416Z,1516396148.416 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2018-01-19T21:09:08.417Z,1516396148.417 [logger ThreadHandler](INFO): Handler Thread ID is 8047
2018-01-19T21:09:08.445Z,1516396148.445 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 8048
2018-01-19T21:09:08.446Z,1516396148.446 [CTD_Seabird](INFO): Initializing
2018-01-19T21:09:08.481Z,1516396148.481 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 8050
2018-01-19T21:09:08.483Z,1516396148.483 [WetLabsBB2FL](INFO): Powering down
2018-01-19T21:09:08.517Z,1516396148.517 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 8051
2018-01-19T21:09:08.523Z,1516396148.523 [Radio_Surface](INFO): Powering up
2018-01-19T21:09:08.525Z,1516396148.525 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2018-01-19T21:09:08.527Z,1516396148.527 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2018-01-19T21:09:08.528Z,1516396148.528 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2018-01-19T21:09:08.529Z,1516396148.529 [LoopControl](DEBUG): Initialize LoopControlComponent.
2018-01-19T21:09:08.529Z,1516396148.529 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-01-19T21:09:08.529Z,1516396148.529 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2018-01-19T21:09:08.530Z,1516396148.530 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2018-01-19T21:09:08.530Z,1516396148.530 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2018-01-19T21:09:08.530Z,1516396148.530 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2018-01-19T21:09:08.531Z,1516396148.531 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2018-01-19T21:09:08.532Z,1516396148.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:09:08.533Z,1516396148.533 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:09:08.533Z,1516396148.533 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:09:08.534Z,1516396148.534 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:09:08.534Z,1516396148.534 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:09:08.535Z,1516396148.535 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:09:08.535Z,1516396148.535 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:09:08.536Z,1516396148.536 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:09:08.536Z,1516396148.536 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:09:08.536Z,1516396148.536 [NavChart](DEBUG): Initialize NavChart Navigation.
2018-01-19T21:09:08.537Z,1516396148.537 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2018-01-19T21:09:08.549Z,1516396148.549 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2018-01-19T21:09:08.561Z,1516396148.561 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 8052
2018-01-19T21:09:08.565Z,1516396148.565 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2018-01-19T21:09:08.565Z,1516396148.565 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2018-01-19T21:09:08.565Z,1516396148.565 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2018-01-19T21:09:08.565Z,1516396148.565 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2018-01-19T21:09:08.566Z,1516396148.566 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2018-01-19T21:09:08.566Z,1516396148.566 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2018-01-19T21:09:08.566Z,1516396148.566 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2018-01-19T21:09:08.566Z,1516396148.566 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2018-01-19T21:09:08.566Z,1516396148.566 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2018-01-19T21:09:08.566Z,1516396148.566 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2018-01-19T21:09:08.567Z,1516396148.567 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2018-01-19T21:09:08.567Z,1516396148.567 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2018-01-19T21:09:08.567Z,1516396148.567 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2018-01-19T21:09:08.567Z,1516396148.567 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2018-01-19T21:09:08.567Z,1516396148.567 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2018-01-19T21:09:08.568Z,1516396148.568 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2018-01-19T21:09:08.604Z,1516396148.604 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2018-01-19T21:09:08.639Z,1516396148.639 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2018-01-19T21:09:08.640Z,1516396148.640 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2018-01-19T21:09:08.727Z,1516396148.727 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-01-19T21:09:08.727Z,1516396148.727 [CTD_Seabird](INFO): Powering down
2018-01-19T21:09:08.758Z,1516396148.758 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2018-01-19T21:09:08.759Z,1516396148.759 [Default:A.Wait](DEBUG): Construct Wait.
2018-01-19T21:09:08.777Z,1516396148.777 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-01-19T21:09:08.799Z,1516396148.799 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2018-01-19T21:09:08.802Z,1516396148.802 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2018-01-19T21:09:08.824Z,1516396148.824 [Default:E.Execute](DEBUG): Construct Execute.
2018-01-19T21:09:08.827Z,1516396148.827 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2018-01-19T21:09:08.842Z,1516396148.842 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,Depth_Keller,NAL9602,Onboard,DAT,PNI_TCM,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-01-19T21:09:08.927Z,1516396148.927 [ESPComponent](INFO): powering down ESP
2018-01-19T21:09:09.240Z,1516396149.240 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2018-01-19T21:09:09.330Z,1516396149.330 [DAT](INFO): Powering up
2018-01-19T21:09:09.330Z,1516396149.330 [DAT](DEBUG): Initializing DAT.
2018-01-19T21:09:09.469Z,1516396149.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:09.469Z,1516396149.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-19T21:09:09.473Z,1516396149.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:09.491Z,1516396149.491 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:09.518Z,1516396149.518 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:09.625Z,1516396149.625 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-01-19T21:09:09.634Z,1516396149.634 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-01-19T21:09:09.658Z,1516396149.658 [ElevatorServo](DEBUG): Initializing EZServoServo.
2018-01-19T21:09:09.665Z,1516396149.665 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2018-01-19T21:09:09.689Z,1516396149.689 [MassServo](DEBUG): Initializing EZServoServo.
2018-01-19T21:09:09.697Z,1516396149.697 [MassServo](DEBUG): Initializing MassServo.
2018-01-19T21:09:09.715Z,1516396149.715 [RudderServo](DEBUG): Initializing EZServoServo.
2018-01-19T21:09:09.721Z,1516396149.721 [RudderServo](DEBUG): Initializing RudderServo.
2018-01-19T21:09:09.735Z,1516396149.735 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-01-19T21:09:09.741Z,1516396149.741 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-01-19T21:09:10.163Z,1516396150.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:10.163Z,1516396150.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-19T21:09:10.164Z,1516396150.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:10.165Z,1516396150.165 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:10.167Z,1516396150.167 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:10.509Z,1516396150.509 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2018-01-19T21:09:10.509Z,1516396150.509 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2018-01-19T21:09:10.509Z,1516396150.509 [BuoyancyServo] Communications Fault, FailCount= 1
2018-01-19T21:09:10.509Z,1516396150.509 [BuoyancyServo](ERROR): Communications Fault
2018-01-19T21:09:10.708Z,1516396150.708 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2018-01-19T21:09:10.804Z,1516396150.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:10.804Z,1516396150.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-19T21:09:10.805Z,1516396150.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:10.809Z,1516396150.809 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:10.810Z,1516396150.810 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:10.830Z,1516396150.830 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-01-19T21:09:10.831Z,1516396150.831 [BuoyancyServo](INFO): Powering down
2018-01-19T21:09:11.147Z,1516396151.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:11.147Z,1516396151.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-19T21:09:11.149Z,1516396151.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:11.151Z,1516396151.151 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:11.152Z,1516396151.152 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:11.571Z,1516396151.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:11.571Z,1516396151.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-19T21:09:11.572Z,1516396151.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:11.573Z,1516396151.573 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:11.574Z,1516396151.574 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:12.037Z,1516396152.037 [Aanderaa_O2](INFO): Powering down
2018-01-19T21:09:12.160Z,1516396152.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:12.160Z,1516396152.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-19T21:09:12.162Z,1516396152.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:12.169Z,1516396152.169 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:12.170Z,1516396152.170 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:12.376Z,1516396152.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:12.376Z,1516396152.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-19T21:09:12.377Z,1516396152.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:12.381Z,1516396152.381 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:12.382Z,1516396152.382 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-19T21:09:12.781Z,1516396152.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-19T21:09:12.782Z,1516396152.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:12.850Z,1516396152.850 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2018-01-19T21:09:12.850Z,1516396152.850 [BuoyancyServo] No Fault, FailCount= 1
2018-01-19T21:09:13.186Z,1516396153.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-19T21:09:13.197Z,1516396153.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:13.211Z,1516396153.211 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-01-19T21:09:13.330Z,1516396153.330 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-01-19T21:09:13.581Z,1516396153.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-19T21:09:13.582Z,1516396153.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:13.974Z,1516396153.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:14.390Z,1516396154.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:14.812Z,1516396154.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:15.159Z,1516396155.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:15.579Z,1516396155.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:15.973Z,1516396155.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:16.358Z,1516396156.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:16.794Z,1516396156.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:17.186Z,1516396157.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:17.578Z,1516396157.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:18.007Z,1516396158.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:18.378Z,1516396158.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:18.771Z,1516396158.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:19.218Z,1516396159.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:19.614Z,1516396159.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:19.971Z,1516396159.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:20.401Z,1516396160.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:20.778Z,1516396160.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:21.147Z,1516396161.147 [DAT](DEBUG): 
Teledyne Benthos DAT-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.10.9
Jan 10 2000 17:39:06 
WARNING: battery low
Features enabled [Bearing]
CONNECT
2018-01-19T21:09:21.147Z,1516396161.147 [DAT](INFO): Got CONNECT
2018-01-19T21:09:21.161Z,1516396161.161 [DAT](INFO): entering command mode
2018-01-19T21:09:21.218Z,1516396161.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:21.568Z,1516396161.568 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-19T21:09:21.614Z,1516396161.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:21.941Z,1516396161.941 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-19T21:09:21.973Z,1516396161.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:22.353Z,1516396162.353 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-19T21:09:22.395Z,1516396162.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:22.774Z,1516396162.774 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-19T21:09:22.774Z,1516396162.774 [DAT](DEBUG): read user prompt 1: user:1>
2018-01-19T21:09:22.775Z,1516396162.775 [DAT](INFO): command mode acknowledged
2018-01-19T21:09:22.811Z,1516396162.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:23.143Z,1516396163.143 [DAT](INFO): setting local address to 2
2018-01-19T21:09:23.212Z,1516396163.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:23.561Z,1516396163.561 [DAT](DEBUG): checking for local address setting acknowledgment
2018-01-19T21:09:23.562Z,1516396163.562 [DAT](INFO): set local address to 2
2018-01-19T21:09:23.594Z,1516396163.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:23.973Z,1516396163.973 [DAT](DEBUG): read user prompt 2: user:2>
2018-01-19T21:09:24.032Z,1516396164.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:24.415Z,1516396164.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:24.790Z,1516396164.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:25.171Z,1516396165.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:25.579Z,1516396165.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:26.027Z,1516396166.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:26.367Z,1516396166.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:26.794Z,1516396166.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:27.191Z,1516396167.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:27.594Z,1516396167.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:27.974Z,1516396167.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:28.390Z,1516396168.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:28.786Z,1516396168.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:29.194Z,1516396169.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:29.571Z,1516396169.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:29.982Z,1516396169.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:30.394Z,1516396170.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:30.775Z,1516396170.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:31.182Z,1516396171.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:31.599Z,1516396171.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:31.994Z,1516396171.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:32.362Z,1516396172.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:32.793Z,1516396172.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:33.191Z,1516396173.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:33.560Z,1516396173.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:33.978Z,1516396173.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:34.369Z,1516396174.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:34.769Z,1516396174.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:35.211Z,1516396175.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:35.569Z,1516396175.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:35.969Z,1516396175.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:36.374Z,1516396176.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:36.769Z,1516396176.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:37.169Z,1516396177.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:37.618Z,1516396177.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:37.922Z,1516396177.922 [NAL9602](INFO): Powering up NAL9602
2018-01-19T21:09:37.977Z,1516396177.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:38.365Z,1516396178.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:38.763Z,1516396178.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:39.171Z,1516396179.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:39.577Z,1516396179.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:40.022Z,1516396180.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:40.374Z,1516396180.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:40.777Z,1516396180.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:41.194Z,1516396181.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:41.570Z,1516396181.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:41.983Z,1516396181.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:42.418Z,1516396182.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:42.776Z,1516396182.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:43.187Z,1516396183.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:43.586Z,1516396183.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:43.995Z,1516396183.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:44.390Z,1516396184.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:44.795Z,1516396184.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:45.195Z,1516396185.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:45.581Z,1516396185.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:45.990Z,1516396185.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:46.394Z,1516396186.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:46.764Z,1516396186.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:47.211Z,1516396187.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:47.567Z,1516396187.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:47.970Z,1516396187.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:48.402Z,1516396188.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:48.776Z,1516396188.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:49.122Z,1516396189.122 [NAL9602](INFO): NAL9602 initialized
2018-01-19T21:09:49.179Z,1516396189.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:49.644Z,1516396189.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:49.976Z,1516396189.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:50.410Z,1516396190.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:50.800Z,1516396190.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:51.168Z,1516396191.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:51.571Z,1516396191.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:52.013Z,1516396192.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:52.391Z,1516396192.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:52.798Z,1516396192.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:53.203Z,1516396193.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:53.590Z,1516396193.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:53.991Z,1516396193.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:54.391Z,1516396194.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:54.770Z,1516396194.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:55.175Z,1516396195.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:55.606Z,1516396195.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:56.009Z,1516396196.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:56.369Z,1516396196.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:56.787Z,1516396196.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:57.181Z,1516396197.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:57.580Z,1516396197.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:57.987Z,1516396197.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:58.390Z,1516396198.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:58.787Z,1516396198.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:59.210Z,1516396199.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:09:59.570Z,1516396199.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:00.003Z,1516396200.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:00.363Z,1516396200.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:00.772Z,1516396200.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:01.164Z,1516396201.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:01.575Z,1516396201.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:01.973Z,1516396201.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:02.379Z,1516396202.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:02.780Z,1516396202.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:03.173Z,1516396203.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:03.570Z,1516396203.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:03.970Z,1516396203.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:04.372Z,1516396204.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:04.772Z,1516396204.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:05.170Z,1516396205.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:05.567Z,1516396205.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:05.978Z,1516396205.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:06.375Z,1516396206.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:06.774Z,1516396206.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:07.183Z,1516396207.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:07.588Z,1516396207.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:07.982Z,1516396207.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:08.375Z,1516396208.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:08.779Z,1516396208.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:09.174Z,1516396209.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:09.575Z,1516396209.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:09.973Z,1516396209.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:10.379Z,1516396210.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:10.753Z,1516396210.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:11.157Z,1516396211.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:11.562Z,1516396211.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:11.966Z,1516396211.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:12.387Z,1516396212.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:12.784Z,1516396212.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:13.194Z,1516396213.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:13.585Z,1516396213.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:13.967Z,1516396213.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:14.365Z,1516396214.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:14.765Z,1516396214.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:15.187Z,1516396215.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:15.565Z,1516396215.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:15.965Z,1516396215.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:16.359Z,1516396216.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:16.769Z,1516396216.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:17.165Z,1516396217.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:17.572Z,1516396217.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:17.976Z,1516396217.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:18.375Z,1516396218.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:18.768Z,1516396218.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:19.166Z,1516396219.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:19.566Z,1516396219.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:19.963Z,1516396219.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:20.360Z,1516396220.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:20.762Z,1516396220.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:21.167Z,1516396221.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:21.565Z,1516396221.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:21.967Z,1516396221.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:22.363Z,1516396222.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:22.763Z,1516396222.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:23.196Z,1516396223.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:23.568Z,1516396223.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:23.995Z,1516396223.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:24.362Z,1516396224.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:24.767Z,1516396224.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:25.163Z,1516396225.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:25.562Z,1516396225.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:25.967Z,1516396225.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:26.366Z,1516396226.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:26.766Z,1516396226.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:27.163Z,1516396227.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:27.563Z,1516396227.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:27.970Z,1516396227.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:28.006Z,1516396228.006 [SBIT](IMPORTANT): Beginning Startup BIT
2018-01-19T21:10:28.010Z,1516396228.010 [CBIT](IMPORTANT): Beginning ground fault scan
2018-01-19T21:10:28.395Z,1516396228.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:28.793Z,1516396228.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:29.172Z,1516396229.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:29.571Z,1516396229.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:29.966Z,1516396229.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:30.470Z,1516396230.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:30.875Z,1516396230.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:31.267Z,1516396231.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:31.668Z,1516396231.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:32.067Z,1516396232.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:32.470Z,1516396232.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:32.870Z,1516396232.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:33.272Z,1516396233.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:33.679Z,1516396233.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:34.103Z,1516396234.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:34.472Z,1516396234.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:34.868Z,1516396234.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:35.275Z,1516396235.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:35.667Z,1516396235.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:36.068Z,1516396236.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:36.468Z,1516396236.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:36.870Z,1516396236.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:37.268Z,1516396237.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:37.668Z,1516396237.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:38.071Z,1516396238.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:38.472Z,1516396238.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:38.873Z,1516396238.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:39.002Z,1516396239.002 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.015265
CHAN A1 (24V): -0.018246
CHAN A2 (12V): 0.000310
CHAN A3 (5V): -0.002278
CHAN B0 (3.3V): -0.001461
CHAN B1 (3.15aV): -0.001393
CHAN B2 (3.15bV): -0.001408
CHAN B3 (GND): -0.001973
OPEN: 0.004138
Full Scale Calc: 4.765 mA, -1.589 mA
2018-01-19T21:10:39.276Z,1516396239.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:39.672Z,1516396239.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:40.067Z,1516396240.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:40.467Z,1516396240.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:40.867Z,1516396240.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:41.268Z,1516396241.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:41.671Z,1516396241.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:42.075Z,1516396242.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:42.468Z,1516396242.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:42.869Z,1516396242.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:43.266Z,1516396243.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:43.828Z,1516396243.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:44.231Z,1516396244.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:44.623Z,1516396244.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:45.031Z,1516396245.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:45.411Z,1516396245.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:45.811Z,1516396245.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:46.212Z,1516396246.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:46.623Z,1516396246.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:47.010Z,1516396247.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:47.420Z,1516396247.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:47.816Z,1516396247.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:48.213Z,1516396248.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:48.615Z,1516396248.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:49.025Z,1516396249.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:49.425Z,1516396249.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:49.825Z,1516396249.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:50.231Z,1516396250.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:50.591Z,1516396250.591 [DAT](INFO): received an acoustic signal
2018-01-19T21:10:50.615Z,1516396250.615 [DAT](INFO): received a range request message
2018-01-19T21:10:50.615Z,1516396250.615 [DAT](INFO): Read direction message, but no range.
2018-01-19T21:10:50.636Z,1516396250.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:51.019Z,1516396251.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:51.414Z,1516396251.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:51.819Z,1516396251.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:52.218Z,1516396252.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:52.612Z,1516396252.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:53.012Z,1516396253.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:53.420Z,1516396253.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:53.821Z,1516396253.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:54.231Z,1516396254.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:54.628Z,1516396254.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:55.035Z,1516396255.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:55.424Z,1516396255.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:55.826Z,1516396255.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:56.220Z,1516396256.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:56.623Z,1516396256.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:57.025Z,1516396257.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:57.429Z,1516396257.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:57.819Z,1516396257.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:58.222Z,1516396258.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:58.620Z,1516396258.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:59.020Z,1516396259.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:59.425Z,1516396259.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:10:59.824Z,1516396259.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:00.227Z,1516396260.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:00.623Z,1516396260.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:01.020Z,1516396261.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:01.419Z,1516396261.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:01.830Z,1516396261.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:02.251Z,1516396262.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:02.604Z,1516396262.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:03.007Z,1516396263.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:03.431Z,1516396263.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:03.827Z,1516396263.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:04.205Z,1516396264.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:04.635Z,1516396264.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:05.029Z,1516396265.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:05.432Z,1516396265.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:05.828Z,1516396265.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:06.208Z,1516396266.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:06.625Z,1516396266.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:07.009Z,1516396267.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:07.412Z,1516396267.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:07.810Z,1516396267.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:08.211Z,1516396268.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:08.595Z,1516396268.595 [DAT](INFO): transmitted an acoustic signal
2018-01-19T21:11:08.611Z,1516396268.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:08.995Z,1516396268.995 [DAT](INFO): received an acoustic signal
2018-01-19T21:11:09.039Z,1516396269.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:09.407Z,1516396269.407 [DAT](INFO): received a bearing request message
2018-01-19T21:11:09.407Z,1516396269.407 [DAT](INFO): Read direction message, but no range.
2018-01-19T21:11:09.422Z,1516396269.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:09.845Z,1516396269.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:10.221Z,1516396270.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:10.760Z,1516396270.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:11.152Z,1516396271.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:11.551Z,1516396271.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:11.962Z,1516396271.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:12.349Z,1516396272.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:12.751Z,1516396272.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:13.191Z,1516396273.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:13.547Z,1516396273.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:13.943Z,1516396273.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:14.347Z,1516396274.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:14.751Z,1516396274.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:15.156Z,1516396275.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:15.551Z,1516396275.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:15.973Z,1516396275.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:16.342Z,1516396276.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:16.743Z,1516396276.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:17.143Z,1516396277.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:17.542Z,1516396277.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:17.956Z,1516396277.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:18.351Z,1516396278.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:18.745Z,1516396278.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:19.146Z,1516396279.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:19.542Z,1516396279.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:19.949Z,1516396279.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:20.349Z,1516396280.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:20.748Z,1516396280.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:21.149Z,1516396281.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:21.552Z,1516396281.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:21.946Z,1516396281.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:21.955Z,1516396281.955 [SBIT](IMPORTANT): SBIT PASSED
2018-01-19T21:11:22.344Z,1516396282.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:22.347Z,1516396282.347 [MissionManager](IMPORTANT): Started mission Startup
2018-01-19T21:11:22.347Z,1516396282.347 [Startup] Running Loop=1
2018-01-19T21:11:22.347Z,1516396282.347 [Startup](DEBUG): Aggregate::initialize Startup
2018-01-19T21:11:22.347Z,1516396282.347 [Startup:A.GoToSurface] Running Loop=1
2018-01-19T21:11:22.347Z,1516396282.347 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-01-19T21:11:22.348Z,1516396282.348 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-01-19T21:11:22.348Z,1516396282.348 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-01-19T21:11:22.349Z,1516396282.349 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-01-19T21:11:22.349Z,1516396282.349 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2018-01-19T21:11:22.349Z,1516396282.349 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-01-19T21:11:22.356Z,1516396282.356 [Startup:StartupSatComms] Running Loop=1
2018-01-19T21:11:22.356Z,1516396282.356 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2018-01-19T21:11:22.356Z,1516396282.356 [Startup:StartupSatComms:A] Running Loop=1
2018-01-19T21:11:22.740Z,1516396282.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:22.744Z,1516396282.744 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2018-01-19T21:11:23.142Z,1516396283.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:23.539Z,1516396283.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:23.953Z,1516396283.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:24.351Z,1516396284.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:24.748Z,1516396284.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:25.152Z,1516396285.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:25.552Z,1516396285.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:25.954Z,1516396285.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:26.350Z,1516396286.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:26.743Z,1516396286.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:27.147Z,1516396287.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:27.539Z,1516396287.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:27.947Z,1516396287.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:28.341Z,1516396288.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:28.751Z,1516396288.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:29.151Z,1516396289.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:29.545Z,1516396289.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:29.943Z,1516396289.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:30.354Z,1516396290.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:30.757Z,1516396290.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:31.152Z,1516396291.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:31.552Z,1516396291.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:31.946Z,1516396291.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:32.343Z,1516396292.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:32.758Z,1516396292.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:33.149Z,1516396293.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:33.548Z,1516396293.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:33.947Z,1516396293.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:34.351Z,1516396294.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:34.746Z,1516396294.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:35.147Z,1516396295.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:35.553Z,1516396295.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:35.964Z,1516396295.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:36.363Z,1516396296.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:36.756Z,1516396296.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:37.139Z,1516396297.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:37.551Z,1516396297.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:37.951Z,1516396297.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:38.353Z,1516396298.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:38.751Z,1516396298.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:39.151Z,1516396299.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:39.549Z,1516396299.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:39.950Z,1516396299.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:40.355Z,1516396300.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:40.763Z,1516396300.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:41.159Z,1516396301.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:41.559Z,1516396301.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:41.961Z,1516396301.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:42.353Z,1516396302.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:42.758Z,1516396302.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:43.131Z,1516396303.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:43.558Z,1516396303.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:43.963Z,1516396303.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:44.331Z,1516396304.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:44.752Z,1516396304.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:45.157Z,1516396305.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:45.550Z,1516396305.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:45.967Z,1516396305.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:46.364Z,1516396306.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:46.759Z,1516396306.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:47.167Z,1516396307.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:47.533Z,1516396307.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:47.934Z,1516396307.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:48.358Z,1516396308.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:48.763Z,1516396308.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:49.134Z,1516396309.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:49.561Z,1516396309.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:49.938Z,1516396309.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:50.361Z,1516396310.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:50.734Z,1516396310.734 [DAT](INFO): transmitted an acoustic signal
2018-01-19T21:11:50.768Z,1516396310.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:51.166Z,1516396311.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:51.560Z,1516396311.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:51.958Z,1516396311.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:52.359Z,1516396312.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:52.739Z,1516396312.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:53.135Z,1516396313.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:53.541Z,1516396313.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:53.939Z,1516396313.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:54.363Z,1516396314.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:54.741Z,1516396314.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:55.135Z,1516396315.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:55.542Z,1516396315.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:55.942Z,1516396315.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:56.352Z,1516396316.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:56.756Z,1516396316.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:57.148Z,1516396317.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:57.548Z,1516396317.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:57.946Z,1516396317.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:58.343Z,1516396318.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:58.742Z,1516396318.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:59.141Z,1516396319.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:59.545Z,1516396319.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:11:59.940Z,1516396319.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:00.351Z,1516396320.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:00.745Z,1516396320.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:01.140Z,1516396321.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:01.548Z,1516396321.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:01.959Z,1516396321.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:02.351Z,1516396322.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:02.759Z,1516396322.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:03.146Z,1516396323.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:03.551Z,1516396323.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:03.948Z,1516396323.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:04.341Z,1516396324.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:04.738Z,1516396324.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:05.147Z,1516396325.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:05.541Z,1516396325.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:05.941Z,1516396325.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:06.344Z,1516396326.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:06.756Z,1516396326.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:07.151Z,1516396327.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:07.555Z,1516396327.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:07.978Z,1516396327.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:08.345Z,1516396328.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:08.751Z,1516396328.751 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:08.751Z,1516396328.751 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-01-19T21:12:08.751Z,1516396328.751 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:12:08.753Z,1516396328.753 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:08.753Z,1516396328.753 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-01-19T21:12:08.753Z,1516396328.753 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:12:08.755Z,1516396328.755 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:08.755Z,1516396328.755 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-01-19T21:12:08.755Z,1516396328.755 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:12:08.767Z,1516396328.767 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:12:08.767Z,1516396328.767 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:12:08.767Z,1516396328.767 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:12:09.155Z,1516396329.155 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:12:09.155Z,1516396329.155 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-01-19T21:12:09.155Z,1516396329.155 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:12:09.155Z,1516396329.155 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-01-19T21:12:09.156Z,1516396329.156 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:12:09.156Z,1516396329.156 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-01-19T21:12:09.542Z,1516396329.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:12:09.542Z,1516396329.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:12:09.542Z,1516396329.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:12:09.543Z,1516396329.543 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:12:09.543Z,1516396329.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:12:09.543Z,1516396329.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:12:09.544Z,1516396329.544 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:12:09.544Z,1516396329.544 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:12:09.545Z,1516396329.545 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:12:09.949Z,1516396329.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:12:09.950Z,1516396329.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:10.362Z,1516396330.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:12:10.363Z,1516396330.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:13.508Z,1516396333.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:12:13.510Z,1516396333.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:13.666Z,1516396333.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-01-19T21:12:13.667Z,1516396333.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:13.998Z,1516396333.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:12:13.999Z,1516396333.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:14.334Z,1516396334.334 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003765
2018-01-19T21:12:14.392Z,1516396334.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:12:14.393Z,1516396334.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:14.774Z,1516396334.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:12:14.775Z,1516396334.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:15.179Z,1516396335.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:12:15.179Z,1516396335.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:15.577Z,1516396335.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T21:12:15.578Z,1516396335.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:15.979Z,1516396335.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T21:12:15.980Z,1516396335.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:16.379Z,1516396336.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T21:12:16.379Z,1516396336.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:16.778Z,1516396336.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T21:12:16.779Z,1516396336.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:17.172Z,1516396337.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T21:12:17.174Z,1516396337.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:17.581Z,1516396337.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T21:12:17.582Z,1516396337.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:17.979Z,1516396337.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T21:12:17.979Z,1516396337.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:18.380Z,1516396338.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T21:12:18.381Z,1516396338.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:18.792Z,1516396338.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T21:12:18.809Z,1516396338.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:19.184Z,1516396339.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T21:12:19.185Z,1516396339.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:19.584Z,1516396339.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:12:19.585Z,1516396339.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:19.981Z,1516396339.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:12:19.982Z,1516396339.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:20.386Z,1516396340.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:12:20.391Z,1516396340.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:20.775Z,1516396340.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:12:20.776Z,1516396340.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:21.186Z,1516396341.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:12:21.187Z,1516396341.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:21.579Z,1516396341.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T21:12:21.580Z,1516396341.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:21.975Z,1516396341.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:12:21.976Z,1516396341.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:22.380Z,1516396342.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:12:22.386Z,1516396342.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:22.393Z,1516396342.393 [Startup:StartupSatComms:A](INFO): Timed out from 2018-01-19T21:11:22.4Z
2018-01-19T21:12:22.393Z,1516396342.393 [Startup:StartupSatComms:A] Stopped
2018-01-19T21:12:22.393Z,1516396342.393 [Startup:StartupSatComms:B] Running Loop=1
2018-01-19T21:12:22.780Z,1516396342.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:12:22.781Z,1516396342.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:22.784Z,1516396342.784 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-01-19T21:12:23.226Z,1516396343.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-01-19T21:12:23.227Z,1516396343.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:23.590Z,1516396343.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T21:12:23.591Z,1516396343.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:26.726Z,1516396346.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T21:12:26.727Z,1516396346.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:26.810Z,1516396346.810 [DataOverHttps](INFO): Sending 146 bytes from file Logs/20180119T195347/Courier0012.lzma
2018-01-19T21:12:26.886Z,1516396346.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-19T21:12:26.887Z,1516396346.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:27.215Z,1516396347.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-19T21:12:27.216Z,1516396347.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:27.555Z,1516396347.555 [DataOverHttps](INFO): Moved sent file to Logs/20180119T195347/Courier0012.lzma.bak
2018-01-19T21:12:27.555Z,1516396347.555 [DataOverHttps](INFO): SBD MOMSN=7723773
2018-01-19T21:12:27.613Z,1516396347.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-19T21:12:27.614Z,1516396347.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:28.082Z,1516396348.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-19T21:12:28.083Z,1516396348.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:28.414Z,1516396348.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-19T21:12:28.415Z,1516396348.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:31.733Z,1516396351.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:31.863Z,1516396351.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:32.224Z,1516396352.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:32.619Z,1516396352.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:32.995Z,1516396352.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:33.399Z,1516396353.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:36.660Z,1516396356.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:36.771Z,1516396356.771 [DataOverHttps](INFO): Sending 1592 bytes from file Logs/20180119T195347/Express0013.lzma
2018-01-19T21:12:36.845Z,1516396356.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:37.164Z,1516396357.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:37.496Z,1516396357.496 [DataOverHttps](INFO): Moved sent file to Logs/20180119T195347/Express0013.lzma.bak
2018-01-19T21:12:37.496Z,1516396357.496 [DataOverHttps](INFO): SBD MOMSN=7723775
2018-01-19T21:12:37.604Z,1516396357.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:38.024Z,1516396358.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:38.338Z,1516396358.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:41.485Z,1516396361.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:41.621Z,1516396361.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:41.979Z,1516396361.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:42.390Z,1516396362.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:42.771Z,1516396362.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:43.170Z,1516396363.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:46.332Z,1516396366.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:46.415Z,1516396366.415 [DataOverHttps](INFO): Sending 578 bytes from file Logs/20180119T210901/Express0001.lzma
2018-01-19T21:12:46.498Z,1516396366.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:46.825Z,1516396366.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:47.159Z,1516396367.159 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0001.lzma.bak
2018-01-19T21:12:47.159Z,1516396367.159 [DataOverHttps](INFO): SBD MOMSN=7723849
2018-01-19T21:12:47.238Z,1516396367.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:47.688Z,1516396367.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:47.691Z,1516396367.691 [Startup:StartupSatComms:B] Stopped
2018-01-19T21:12:47.692Z,1516396367.692 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2018-01-19T21:12:47.692Z,1516396367.692 [Startup:StartupSatComms] Stopped
2018-01-19T21:12:47.692Z,1516396367.692 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2018-01-19T21:12:47.693Z,1516396367.693 [Startup](INFO): Completed Startup
2018-01-19T21:12:47.693Z,1516396367.693 [MissionManager](INFO): Startup is completed.
2018-01-19T21:12:47.693Z,1516396367.693 [MissionManager](INFO): Uninitializing Mission Startup
2018-01-19T21:12:47.693Z,1516396367.693 [Startup] Stopped
2018-01-19T21:12:47.693Z,1516396367.693 [Startup](DEBUG): Aggregate::uninitialize Startup
2018-01-19T21:12:47.693Z,1516396367.693 [Startup:A.GoToSurface] Stopped
2018-01-19T21:12:47.694Z,1516396367.694 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-01-19T21:12:48.006Z,1516396368.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:48.025Z,1516396368.025 [MissionManager](IMPORTANT): Started mission Default
2018-01-19T21:12:48.025Z,1516396368.025 [Default] Running Loop=1
2018-01-19T21:12:48.026Z,1516396368.026 [Default](DEBUG): Aggregate::initialize Default
2018-01-19T21:12:48.026Z,1516396368.026 [Default:B.GoToSurface] Running Loop=1
2018-01-19T21:12:48.026Z,1516396368.026 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-01-19T21:12:48.026Z,1516396368.026 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-01-19T21:12:48.026Z,1516396368.026 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-01-19T21:12:48.027Z,1516396368.027 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-01-19T21:12:48.027Z,1516396368.027 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2018-01-19T21:12:48.027Z,1516396368.027 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-01-19T21:12:48.027Z,1516396368.027 [Default:A.Wait] Running Loop=1
2018-01-19T21:12:48.027Z,1516396368.027 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-01-19T21:12:51.102Z,1516396371.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:51.236Z,1516396371.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:51.587Z,1516396371.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:51.997Z,1516396371.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:52.364Z,1516396372.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:52.770Z,1516396372.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:53.175Z,1516396373.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:53.565Z,1516396373.565 [PNI_TCM](ERROR): CRC does not match. Expected:0x33307 got:0x41245
2018-01-19T21:12:53.602Z,1516396373.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:53.974Z,1516396373.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:54.368Z,1516396374.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:54.794Z,1516396374.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:55.164Z,1516396375.164 [PNI_TCM](ERROR): CRC does not match. Expected:0x3749 got:0x50905
2018-01-19T21:12:55.195Z,1516396375.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:55.574Z,1516396375.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:55.995Z,1516396375.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:56.390Z,1516396376.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:56.800Z,1516396376.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:57.179Z,1516396377.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:57.573Z,1516396377.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:58.018Z,1516396378.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:58.344Z,1516396378.344 [DAT](FAULT): unknown deviceResponse_: se075, Rx Time:17:42:46.2487

2018-01-19T21:12:58.345Z,1516396378.345 [DAT] Communications Fault, FailCount= 1
2018-01-19T21:12:58.345Z,1516396378.345 [DAT](ERROR): Communications Fault
2018-01-19T21:12:58.384Z,1516396378.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:58.423Z,1516396378.423 [CBIT](ERROR): Communications Fault in component: DAT
2018-01-19T21:12:58.761Z,1516396378.761 [DAT](INFO): Powering down
2018-01-19T21:12:58.906Z,1516396378.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:59.176Z,1516396379.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:59.583Z,1516396379.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:12:59.612Z,1516396379.612 [CBIT](INFO): Clearing failed state for component DAT
2018-01-19T21:12:59.612Z,1516396379.612 [DAT] No Fault, FailCount= 1
2018-01-19T21:12:59.976Z,1516396379.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:00.371Z,1516396380.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:00.769Z,1516396380.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:01.183Z,1516396381.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:01.186Z,1516396381.186 [Default:A.Wait](INFO): Done Waiting.
2018-01-19T21:13:01.186Z,1516396381.186 [Default:A.Wait] Stopped
2018-01-19T21:13:01.186Z,1516396381.186 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T21:13:01.586Z,1516396381.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:01.590Z,1516396381.590 [Default:CheckIn] Running Loop=1
2018-01-19T21:13:01.590Z,1516396381.590 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T21:13:01.590Z,1516396381.590 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T21:13:01.972Z,1516396381.972 [DAT](INFO): Powering up
2018-01-19T21:13:01.972Z,1516396381.972 [DAT](DEBUG): Initializing DAT.
2018-01-19T21:13:02.015Z,1516396382.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:02.018Z,1516396382.018 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-01-19T21:13:02.380Z,1516396382.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:02.783Z,1516396382.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:03.178Z,1516396383.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:03.583Z,1516396383.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:03.982Z,1516396383.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:04.391Z,1516396384.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:04.774Z,1516396384.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:05.172Z,1516396385.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:05.572Z,1516396385.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:05.991Z,1516396385.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:06.380Z,1516396386.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:06.784Z,1516396386.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:07.190Z,1516396387.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:07.602Z,1516396387.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:07.967Z,1516396387.967 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2018-01-19T21:13:08.011Z,1516396388.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:08.369Z,1516396388.369 [PNI_TCM](ERROR): CRC does not match. Expected:0x48494 got:0x6593
2018-01-19T21:13:08.413Z,1516396388.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:08.773Z,1516396388.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:09.186Z,1516396389.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:09.580Z,1516396389.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:09.973Z,1516396389.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:10.375Z,1516396390.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:10.792Z,1516396390.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:11.170Z,1516396391.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:11.581Z,1516396391.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:11.991Z,1516396391.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:12.402Z,1516396392.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:12.787Z,1516396392.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:13.175Z,1516396393.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:13.578Z,1516396393.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:13.956Z,1516396393.956 [DAT](DEBUG): 
Teledyne Benthos DAT-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.10.9
Jan 10 2000 17:42:53 
WARNING: battery low
Features enabled [Bearing]
CONNECT
2018-01-19T21:13:13.956Z,1516396393.956 [DAT](INFO): Got CONNECT
2018-01-19T21:13:13.969Z,1516396393.969 [DAT](INFO): entering command mode
2018-01-19T21:13:14.014Z,1516396394.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:14.375Z,1516396394.375 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-19T21:13:14.418Z,1516396394.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:14.754Z,1516396394.754 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-19T21:13:14.787Z,1516396394.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:15.148Z,1516396395.148 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-19T21:13:15.149Z,1516396395.149 [DAT](DEBUG): read user prompt 1: user:1>
2018-01-19T21:13:15.149Z,1516396395.149 [DAT](INFO): command mode acknowledged
2018-01-19T21:13:15.189Z,1516396395.189 [PNI_TCM](ERROR): CRC does not match. Expected:0x8793 got:0x45336
2018-01-19T21:13:15.227Z,1516396395.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:15.548Z,1516396395.548 [DAT](INFO): setting local address to 2
2018-01-19T21:13:15.618Z,1516396395.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:15.971Z,1516396395.971 [DAT](DEBUG): checking for local address setting acknowledgment
2018-01-19T21:13:15.972Z,1516396395.972 [DAT](INFO): set local address to 2
2018-01-19T21:13:16.007Z,1516396396.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:16.350Z,1516396396.350 [DAT](DEBUG): read user prompt 2: user:2>
2018-01-19T21:13:16.388Z,1516396396.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:16.815Z,1516396396.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:17.248Z,1516396397.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:17.638Z,1516396397.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:18.001Z,1516396398.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:18.400Z,1516396398.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:18.810Z,1516396398.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:19.179Z,1516396399.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:19.604Z,1516396399.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:20.003Z,1516396400.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:20.379Z,1516396400.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:20.812Z,1516396400.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:21.189Z,1516396401.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:21.593Z,1516396401.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:22.030Z,1516396402.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:22.374Z,1516396402.374 [DAT](INFO): received an acoustic signal
2018-01-19T21:13:22.431Z,1516396402.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:22.777Z,1516396402.777 [DAT](INFO): received a range request message
2018-01-19T21:13:22.778Z,1516396402.778 [DAT](INFO): Read direction message, but no range.
2018-01-19T21:13:22.836Z,1516396402.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:23.190Z,1516396403.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:23.588Z,1516396403.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:23.986Z,1516396403.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:24.361Z,1516396404.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:24.766Z,1516396404.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:25.169Z,1516396405.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:25.575Z,1516396405.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:25.967Z,1516396405.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:26.364Z,1516396406.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:26.770Z,1516396406.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:27.175Z,1516396407.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:27.601Z,1516396407.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:27.986Z,1516396407.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:28.376Z,1516396408.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:28.765Z,1516396408.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:29.170Z,1516396409.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:29.567Z,1516396409.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:29.973Z,1516396409.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:30.370Z,1516396410.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:30.768Z,1516396410.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:31.173Z,1516396411.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:31.572Z,1516396411.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:31.974Z,1516396411.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:32.376Z,1516396412.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:32.780Z,1516396412.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:33.178Z,1516396413.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:33.577Z,1516396413.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:33.981Z,1516396413.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:34.367Z,1516396414.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:34.773Z,1516396414.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:35.173Z,1516396415.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:35.574Z,1516396415.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:35.974Z,1516396415.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:36.379Z,1516396416.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:36.774Z,1516396416.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:37.174Z,1516396417.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:37.587Z,1516396417.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:37.987Z,1516396417.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:38.383Z,1516396418.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:38.780Z,1516396418.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:39.174Z,1516396419.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:39.575Z,1516396419.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:39.983Z,1516396419.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:40.383Z,1516396420.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:40.769Z,1516396420.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:41.187Z,1516396421.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:41.591Z,1516396421.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:41.966Z,1516396421.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:42.395Z,1516396422.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:42.792Z,1516396422.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:43.190Z,1516396423.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:43.590Z,1516396423.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:43.988Z,1516396423.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:44.369Z,1516396424.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:44.775Z,1516396424.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:45.166Z,1516396425.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:45.569Z,1516396425.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:45.977Z,1516396425.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:46.370Z,1516396426.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:46.770Z,1516396426.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:47.175Z,1516396427.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:47.575Z,1516396427.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:47.984Z,1516396427.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:48.376Z,1516396428.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:51.470Z,1516396431.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:51.633Z,1516396431.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:51.960Z,1516396431.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:52.368Z,1516396432.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:52.739Z,1516396432.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:53.221Z,1516396433.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:53.548Z,1516396433.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:53.948Z,1516396433.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:54.348Z,1516396434.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:54.737Z,1516396434.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:55.128Z,1516396435.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:55.535Z,1516396435.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:55.933Z,1516396435.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:56.328Z,1516396436.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:56.759Z,1516396436.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:57.162Z,1516396437.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:57.554Z,1516396437.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:57.953Z,1516396437.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:58.365Z,1516396438.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:58.758Z,1516396438.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:59.159Z,1516396439.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:59.556Z,1516396439.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:13:59.931Z,1516396439.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:00.359Z,1516396440.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:00.737Z,1516396440.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:01.134Z,1516396441.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:01.563Z,1516396441.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:01.941Z,1516396441.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:02.334Z,1516396442.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:02.769Z,1516396442.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:03.138Z,1516396443.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:03.567Z,1516396443.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:03.966Z,1516396443.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:04.367Z,1516396444.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:04.768Z,1516396444.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:05.147Z,1516396445.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:05.542Z,1516396445.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:05.938Z,1516396445.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:06.341Z,1516396446.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:06.742Z,1516396446.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:07.141Z,1516396447.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:07.541Z,1516396447.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:07.940Z,1516396447.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:08.339Z,1516396448.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:08.770Z,1516396448.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:09.173Z,1516396449.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:09.569Z,1516396449.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:09.970Z,1516396449.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:10.348Z,1516396450.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:10.743Z,1516396450.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:11.141Z,1516396451.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:11.543Z,1516396451.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:11.946Z,1516396451.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:12.343Z,1516396452.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:12.742Z,1516396452.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:13.138Z,1516396453.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:13.543Z,1516396453.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:13.973Z,1516396453.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:14.340Z,1516396454.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:14.769Z,1516396454.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:15.174Z,1516396455.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:15.543Z,1516396455.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:15.943Z,1516396455.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:16.340Z,1516396456.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:16.737Z,1516396456.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:17.141Z,1516396457.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:17.541Z,1516396457.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:17.939Z,1516396457.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:18.349Z,1516396458.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:18.745Z,1516396458.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:19.156Z,1516396459.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:19.552Z,1516396459.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:19.959Z,1516396459.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:20.353Z,1516396460.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:20.749Z,1516396460.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:21.145Z,1516396461.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:21.551Z,1516396461.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:21.947Z,1516396461.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:22.345Z,1516396462.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:22.747Z,1516396462.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:23.147Z,1516396463.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:23.559Z,1516396463.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:23.939Z,1516396463.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:24.356Z,1516396464.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:24.756Z,1516396464.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:25.155Z,1516396465.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:25.552Z,1516396465.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:25.950Z,1516396465.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:26.352Z,1516396466.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:26.752Z,1516396466.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:27.155Z,1516396467.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:27.553Z,1516396467.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:27.959Z,1516396467.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:28.350Z,1516396468.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:28.757Z,1516396468.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:29.134Z,1516396469.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:29.571Z,1516396469.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:29.958Z,1516396469.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:30.362Z,1516396470.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:30.762Z,1516396470.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:31.163Z,1516396471.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:31.540Z,1516396471.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:31.947Z,1516396471.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:32.344Z,1516396472.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:32.740Z,1516396472.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:33.142Z,1516396473.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:33.543Z,1516396473.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:33.947Z,1516396473.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:34.339Z,1516396474.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:34.770Z,1516396474.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:35.148Z,1516396475.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:35.571Z,1516396475.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:35.952Z,1516396475.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:36.344Z,1516396476.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:36.744Z,1516396476.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:37.137Z,1516396477.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:37.548Z,1516396477.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:37.947Z,1516396477.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:38.347Z,1516396478.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:38.747Z,1516396478.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:39.138Z,1516396479.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:39.546Z,1516396479.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:39.952Z,1516396479.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:40.352Z,1516396480.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:40.755Z,1516396480.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:41.156Z,1516396481.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:41.546Z,1516396481.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:41.938Z,1516396481.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:42.342Z,1516396482.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:42.742Z,1516396482.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:43.145Z,1516396483.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:43.541Z,1516396483.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:43.947Z,1516396483.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:44.351Z,1516396484.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:44.743Z,1516396484.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:45.164Z,1516396485.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:45.555Z,1516396485.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:45.959Z,1516396485.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:46.351Z,1516396486.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:46.751Z,1516396486.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:47.151Z,1516396487.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:47.546Z,1516396487.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:47.951Z,1516396487.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:48.351Z,1516396488.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:48.747Z,1516396488.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:51.848Z,1516396491.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:51.934Z,1516396491.934 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-19T21:14:51.991Z,1516396491.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:52.314Z,1516396492.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:52.743Z,1516396492.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:53.138Z,1516396493.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:53.534Z,1516396493.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:53.918Z,1516396493.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:54.311Z,1516396494.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:54.714Z,1516396494.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:55.148Z,1516396495.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:55.524Z,1516396495.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:55.949Z,1516396495.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:56.324Z,1516396496.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:56.712Z,1516396496.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:57.123Z,1516396497.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:57.515Z,1516396497.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:57.920Z,1516396497.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:58.324Z,1516396498.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:58.720Z,1516396498.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:59.118Z,1516396499.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:59.521Z,1516396499.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:14:59.919Z,1516396499.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:00.319Z,1516396500.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:00.719Z,1516396500.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:01.128Z,1516396501.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:01.527Z,1516396501.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:01.931Z,1516396501.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:02.323Z,1516396502.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:02.723Z,1516396502.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:03.127Z,1516396503.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:03.523Z,1516396503.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:03.935Z,1516396503.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:04.328Z,1516396504.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:04.728Z,1516396504.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:05.114Z,1516396505.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:05.520Z,1516396505.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:05.931Z,1516396505.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:06.317Z,1516396506.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:06.718Z,1516396506.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:07.135Z,1516396507.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:07.529Z,1516396507.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:07.927Z,1516396507.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:08.323Z,1516396508.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:08.716Z,1516396508.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:09.120Z,1516396509.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:09.519Z,1516396509.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:09.928Z,1516396509.928 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:09.928Z,1516396509.928 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-01-19T21:15:09.928Z,1516396509.928 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:15:09.930Z,1516396509.930 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:09.930Z,1516396509.930 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-01-19T21:15:09.930Z,1516396509.930 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:15:09.932Z,1516396509.932 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:09.932Z,1516396509.932 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-01-19T21:15:09.932Z,1516396509.932 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:15:09.957Z,1516396509.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:15:09.957Z,1516396509.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:15:09.960Z,1516396509.960 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:15:10.344Z,1516396510.344 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:15:10.344Z,1516396510.344 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-01-19T21:15:10.345Z,1516396510.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:15:10.345Z,1516396510.345 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-01-19T21:15:10.345Z,1516396510.345 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:15:10.345Z,1516396510.345 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-01-19T21:15:10.732Z,1516396510.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:15:10.733Z,1516396510.733 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:15:10.733Z,1516396510.733 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:15:10.733Z,1516396510.733 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:15:10.734Z,1516396510.734 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:15:10.734Z,1516396510.734 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:15:10.735Z,1516396510.735 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:15:10.735Z,1516396510.735 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:15:10.735Z,1516396510.735 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:15:11.126Z,1516396511.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:15:11.127Z,1516396511.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:11.533Z,1516396511.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:15:11.534Z,1516396511.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:11.910Z,1516396511.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T21:15:11.911Z,1516396511.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:12.314Z,1516396512.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T21:15:12.315Z,1516396512.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:12.718Z,1516396512.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T21:15:12.719Z,1516396512.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:13.146Z,1516396513.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T21:15:13.147Z,1516396513.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:13.539Z,1516396513.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T21:15:13.540Z,1516396513.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:13.944Z,1516396513.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T21:15:13.944Z,1516396513.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:14.318Z,1516396514.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T21:15:14.319Z,1516396514.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:14.718Z,1516396514.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:15:14.719Z,1516396514.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:15.117Z,1516396515.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:15:15.118Z,1516396515.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:15.515Z,1516396515.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:15:15.516Z,1516396515.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:15.938Z,1516396515.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:15:15.939Z,1516396515.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:16.336Z,1516396516.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:15:16.341Z,1516396516.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:16.715Z,1516396516.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T21:15:16.716Z,1516396516.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:17.112Z,1516396517.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T21:15:17.113Z,1516396517.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:17.516Z,1516396517.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T21:15:17.518Z,1516396517.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:17.914Z,1516396517.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T21:15:17.915Z,1516396517.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:18.321Z,1516396518.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T21:15:18.322Z,1516396518.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:18.721Z,1516396518.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T21:15:18.722Z,1516396518.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:19.134Z,1516396519.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T21:15:19.135Z,1516396519.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:19.528Z,1516396519.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T21:15:19.529Z,1516396519.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:19.934Z,1516396519.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T21:15:19.935Z,1516396519.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:20.321Z,1516396520.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T21:15:20.322Z,1516396520.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:20.721Z,1516396520.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:15:20.722Z,1516396520.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:21.119Z,1516396521.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:15:21.120Z,1516396521.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:21.517Z,1516396521.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:15:21.518Z,1516396521.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:21.927Z,1516396521.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:15:21.928Z,1516396521.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:22.328Z,1516396522.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:15:22.329Z,1516396522.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:22.727Z,1516396522.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T21:15:22.728Z,1516396522.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:23.126Z,1516396523.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:15:23.127Z,1516396523.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:23.521Z,1516396523.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:15:23.522Z,1516396523.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:23.918Z,1516396523.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:15:23.919Z,1516396523.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:24.322Z,1516396524.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T21:15:24.323Z,1516396524.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:24.716Z,1516396524.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T21:15:24.718Z,1516396524.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:25.124Z,1516396525.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T21:15:25.125Z,1516396525.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:25.528Z,1516396525.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T21:15:25.529Z,1516396525.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:25.926Z,1516396525.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T21:15:25.927Z,1516396525.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:26.313Z,1516396526.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T21:15:26.314Z,1516396526.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:26.721Z,1516396526.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T21:15:26.722Z,1516396526.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:27.119Z,1516396527.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T21:15:27.120Z,1516396527.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:27.518Z,1516396527.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T21:15:27.519Z,1516396527.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:27.927Z,1516396527.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T21:15:27.928Z,1516396527.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:28.338Z,1516396528.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T21:15:28.339Z,1516396528.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:28.731Z,1516396528.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T21:15:28.732Z,1516396528.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:29.121Z,1516396529.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:15:29.122Z,1516396529.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:29.525Z,1516396529.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T21:15:29.526Z,1516396529.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:29.923Z,1516396529.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T21:15:29.924Z,1516396529.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:30.323Z,1516396530.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:30.723Z,1516396530.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:31.125Z,1516396531.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:31.531Z,1516396531.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:31.932Z,1516396531.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:32.322Z,1516396532.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:32.722Z,1516396532.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:33.120Z,1516396533.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:33.523Z,1516396533.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:33.932Z,1516396533.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:34.331Z,1516396534.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:34.732Z,1516396534.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:35.118Z,1516396535.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:35.527Z,1516396535.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:35.932Z,1516396535.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:36.335Z,1516396536.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:36.735Z,1516396536.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:37.122Z,1516396537.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:37.527Z,1516396537.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:37.931Z,1516396537.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:38.331Z,1516396538.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:38.727Z,1516396538.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:39.120Z,1516396539.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:39.523Z,1516396539.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:39.939Z,1516396539.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:40.335Z,1516396540.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:40.731Z,1516396540.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:41.122Z,1516396541.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:41.519Z,1516396541.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:41.925Z,1516396541.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:42.335Z,1516396542.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:42.735Z,1516396542.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:43.123Z,1516396543.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:43.522Z,1516396543.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:43.928Z,1516396543.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:44.331Z,1516396544.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:44.735Z,1516396544.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:45.131Z,1516396545.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:45.519Z,1516396545.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:45.939Z,1516396545.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:46.339Z,1516396546.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:46.732Z,1516396546.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:47.124Z,1516396547.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:47.527Z,1516396547.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:47.934Z,1516396547.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:48.343Z,1516396548.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:48.739Z,1516396548.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:49.131Z,1516396549.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:52.208Z,1516396552.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:52.351Z,1516396552.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:52.709Z,1516396552.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:53.109Z,1516396553.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:53.507Z,1516396553.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:53.904Z,1516396553.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:54.299Z,1516396554.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:54.704Z,1516396554.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:55.108Z,1516396555.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:55.507Z,1516396555.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:55.911Z,1516396555.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:56.305Z,1516396556.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:56.699Z,1516396556.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:57.111Z,1516396557.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:57.510Z,1516396557.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:57.908Z,1516396557.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:58.308Z,1516396558.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:58.708Z,1516396558.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:59.100Z,1516396559.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:59.511Z,1516396559.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:15:59.904Z,1516396559.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:00.307Z,1516396560.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:00.712Z,1516396560.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:01.108Z,1516396561.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:01.496Z,1516396561.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:01.901Z,1516396561.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:02.304Z,1516396562.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:02.700Z,1516396562.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:03.108Z,1516396563.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:03.514Z,1516396563.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:03.908Z,1516396563.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:04.302Z,1516396564.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:04.704Z,1516396564.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:05.100Z,1516396565.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:05.505Z,1516396565.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:05.906Z,1516396565.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:06.313Z,1516396566.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:06.727Z,1516396566.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:07.115Z,1516396567.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:07.511Z,1516396567.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:07.909Z,1516396567.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:08.306Z,1516396568.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:08.709Z,1516396568.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:09.123Z,1516396569.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:09.520Z,1516396569.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:09.916Z,1516396569.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:10.314Z,1516396570.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:10.715Z,1516396570.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:11.103Z,1516396571.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:11.512Z,1516396571.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:11.913Z,1516396571.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:12.315Z,1516396572.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:12.718Z,1516396572.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:13.122Z,1516396573.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:13.489Z,1516396573.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:13.916Z,1516396573.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:14.320Z,1516396574.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:14.687Z,1516396574.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:15.123Z,1516396575.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:15.522Z,1516396575.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:15.908Z,1516396575.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:16.295Z,1516396576.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:16.700Z,1516396576.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:17.099Z,1516396577.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:17.502Z,1516396577.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:17.898Z,1516396577.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:18.310Z,1516396578.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:18.712Z,1516396578.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:19.115Z,1516396579.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:19.496Z,1516396579.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:19.915Z,1516396579.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:20.307Z,1516396580.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:20.701Z,1516396580.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:21.112Z,1516396581.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:21.514Z,1516396581.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:21.912Z,1516396581.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:22.311Z,1516396582.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:22.704Z,1516396582.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:23.106Z,1516396583.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:23.506Z,1516396583.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:23.900Z,1516396583.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:24.312Z,1516396584.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:24.714Z,1516396584.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:25.118Z,1516396585.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:25.500Z,1516396585.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:25.910Z,1516396585.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:26.309Z,1516396586.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:26.711Z,1516396586.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:27.113Z,1516396587.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:27.515Z,1516396587.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:27.916Z,1516396587.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:28.309Z,1516396588.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:28.705Z,1516396588.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:29.113Z,1516396589.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:29.509Z,1516396589.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:29.907Z,1516396589.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:30.319Z,1516396590.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:30.720Z,1516396590.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:31.116Z,1516396591.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:31.512Z,1516396591.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:31.884Z,1516396591.884 [PNI_TCM](ERROR): CRC does not match. Expected:0x9235 got:0x49307
2018-01-19T21:16:31.914Z,1516396591.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:32.306Z,1516396592.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:32.711Z,1516396592.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:33.125Z,1516396593.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:33.520Z,1516396593.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:33.911Z,1516396593.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:34.323Z,1516396594.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:34.705Z,1516396594.705 [PNI_TCM](ERROR): CRC does not match. Expected:0x49192 got:0x19189
2018-01-19T21:16:34.730Z,1516396594.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:35.101Z,1516396595.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:35.501Z,1516396595.501 [PNI_TCM](ERROR): CRC does not match. Expected:0x25029 got:0x32768
2018-01-19T21:16:35.527Z,1516396595.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:35.930Z,1516396595.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:36.305Z,1516396596.305 [PNI_TCM](ERROR): CRC does not match. Expected:0x8464 got:0x49152
2018-01-19T21:16:36.323Z,1516396596.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:36.720Z,1516396596.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:37.123Z,1516396597.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:37.511Z,1516396597.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:37.912Z,1516396597.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:38.308Z,1516396598.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:38.709Z,1516396598.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:39.144Z,1516396599.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:39.512Z,1516396599.512 [PNI_TCM](ERROR): CRC does not match. Expected:0x37249 got:0x20743
2018-01-19T21:16:39.551Z,1516396599.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:39.912Z,1516396599.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:40.308Z,1516396600.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:40.715Z,1516396600.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:41.087Z,1516396601.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:41.510Z,1516396601.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:41.920Z,1516396601.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:42.318Z,1516396602.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:42.731Z,1516396602.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:43.121Z,1516396603.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:43.505Z,1516396603.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:43.930Z,1516396603.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:44.304Z,1516396604.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:44.706Z,1516396604.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:45.129Z,1516396605.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:45.529Z,1516396605.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:45.901Z,1516396605.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:46.306Z,1516396606.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:46.734Z,1516396606.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:47.128Z,1516396607.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:47.502Z,1516396607.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:47.905Z,1516396607.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:48.307Z,1516396608.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:48.734Z,1516396608.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:49.104Z,1516396609.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:49.502Z,1516396609.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:52.595Z,1516396612.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:52.730Z,1516396612.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:53.091Z,1516396613.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:53.488Z,1516396613.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:53.883Z,1516396613.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:54.263Z,1516396614.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:54.661Z,1516396614.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:55.087Z,1516396615.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:55.466Z,1516396615.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:55.866Z,1516396615.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:56.292Z,1516396616.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:56.694Z,1516396616.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:57.088Z,1516396617.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:57.464Z,1516396617.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:57.871Z,1516396617.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:58.268Z,1516396618.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:58.664Z,1516396618.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:59.095Z,1516396619.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:59.497Z,1516396619.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:16:59.876Z,1516396619.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:00.268Z,1516396620.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:00.668Z,1516396620.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:01.067Z,1516396621.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:01.475Z,1516396621.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:01.868Z,1516396621.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:02.297Z,1516396622.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:02.672Z,1516396622.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:03.072Z,1516396623.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:03.463Z,1516396623.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:03.865Z,1516396623.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:04.267Z,1516396624.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:04.675Z,1516396624.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:05.083Z,1516396625.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:05.477Z,1516396625.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:05.876Z,1516396625.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:06.264Z,1516396626.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:06.665Z,1516396626.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:07.064Z,1516396627.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:07.467Z,1516396627.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:07.869Z,1516396627.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:08.279Z,1516396628.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:08.676Z,1516396628.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:09.075Z,1516396629.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:09.464Z,1516396629.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:09.864Z,1516396629.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:10.266Z,1516396630.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:10.675Z,1516396630.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:11.079Z,1516396631.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:11.475Z,1516396631.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:11.875Z,1516396631.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:12.267Z,1516396632.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:12.666Z,1516396632.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:13.075Z,1516396633.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:13.479Z,1516396633.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:13.875Z,1516396633.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:14.270Z,1516396634.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:14.664Z,1516396634.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:15.076Z,1516396635.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:15.483Z,1516396635.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:15.879Z,1516396635.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:16.270Z,1516396636.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:16.675Z,1516396636.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:17.079Z,1516396637.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:17.478Z,1516396637.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:17.871Z,1516396637.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:18.268Z,1516396638.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:18.670Z,1516396638.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:19.071Z,1516396639.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:19.480Z,1516396639.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:19.875Z,1516396639.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:20.275Z,1516396640.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:20.666Z,1516396640.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:21.082Z,1516396641.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:21.472Z,1516396641.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:21.875Z,1516396641.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:22.271Z,1516396642.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:22.675Z,1516396642.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:23.075Z,1516396643.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:23.475Z,1516396643.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:23.875Z,1516396643.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:24.267Z,1516396644.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:24.670Z,1516396644.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:25.071Z,1516396645.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:25.476Z,1516396645.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:25.875Z,1516396645.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:26.270Z,1516396646.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:26.664Z,1516396646.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:27.082Z,1516396647.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:27.479Z,1516396647.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:27.879Z,1516396647.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:28.270Z,1516396648.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:28.675Z,1516396648.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:29.079Z,1516396649.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:29.482Z,1516396649.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:29.871Z,1516396649.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:30.267Z,1516396650.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:30.675Z,1516396650.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:31.075Z,1516396651.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:31.479Z,1516396651.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:31.875Z,1516396651.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:32.268Z,1516396652.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:32.664Z,1516396652.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:33.076Z,1516396653.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:33.475Z,1516396653.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:33.879Z,1516396653.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:34.268Z,1516396654.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:34.668Z,1516396654.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:35.075Z,1516396655.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:35.475Z,1516396655.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:35.877Z,1516396655.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:36.271Z,1516396656.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:36.670Z,1516396656.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:37.082Z,1516396657.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:37.475Z,1516396657.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:37.876Z,1516396657.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:38.270Z,1516396658.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:38.671Z,1516396658.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:39.077Z,1516396659.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:39.475Z,1516396659.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:39.887Z,1516396659.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:40.272Z,1516396660.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:40.671Z,1516396660.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:41.083Z,1516396661.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:41.480Z,1516396661.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:41.880Z,1516396661.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:42.267Z,1516396662.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:42.670Z,1516396662.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:43.076Z,1516396663.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:43.483Z,1516396663.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:43.887Z,1516396663.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:44.260Z,1516396664.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:44.667Z,1516396664.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:45.065Z,1516396665.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:45.476Z,1516396665.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:45.883Z,1516396665.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:46.286Z,1516396666.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:46.665Z,1516396666.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:47.074Z,1516396667.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:47.470Z,1516396667.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:47.864Z,1516396667.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:48.276Z,1516396668.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:48.679Z,1516396668.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:49.075Z,1516396669.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:49.467Z,1516396669.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:49.867Z,1516396669.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:52.959Z,1516396672.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:53.091Z,1516396673.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:53.458Z,1516396673.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:53.836Z,1516396673.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:54.232Z,1516396674.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:54.630Z,1516396674.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:55.026Z,1516396675.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:55.428Z,1516396675.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:55.831Z,1516396675.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:56.233Z,1516396676.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:56.658Z,1516396676.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:57.058Z,1516396677.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:57.426Z,1516396677.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:57.835Z,1516396677.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:58.235Z,1516396678.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:58.630Z,1516396678.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:59.025Z,1516396679.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:59.456Z,1516396679.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:17:59.832Z,1516396679.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:00.232Z,1516396680.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:00.635Z,1516396680.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:01.030Z,1516396681.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:01.431Z,1516396681.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:01.836Z,1516396681.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:01.840Z,1516396681.840 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T21:13:01.6Z
2018-01-19T21:18:01.840Z,1516396681.840 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T21:18:01.840Z,1516396681.840 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T21:18:02.237Z,1516396682.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:02.240Z,1516396682.240 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-01-19T21:18:02.691Z,1516396682.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:03.043Z,1516396683.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:06.139Z,1516396686.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:06.198Z,1516396686.198 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0004.lzma
2018-01-19T21:18:06.259Z,1516396686.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:06.632Z,1516396686.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:06.967Z,1516396686.967 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0004.lzma.bak
2018-01-19T21:18:06.967Z,1516396686.967 [DataOverHttps](INFO): SBD MOMSN=7723921
2018-01-19T21:18:07.039Z,1516396687.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:07.508Z,1516396687.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:07.808Z,1516396687.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:10.938Z,1516396690.938 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:10.938Z,1516396690.938 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-01-19T21:18:10.938Z,1516396690.938 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:18:10.940Z,1516396690.940 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:10.940Z,1516396690.940 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-01-19T21:18:10.940Z,1516396690.940 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:18:10.942Z,1516396690.942 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:10.942Z,1516396690.942 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-01-19T21:18:10.942Z,1516396690.942 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:18:10.954Z,1516396690.954 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:18:10.955Z,1516396690.955 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:18:10.955Z,1516396690.955 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:18:11.134Z,1516396691.134 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:18:11.134Z,1516396691.134 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-01-19T21:18:11.134Z,1516396691.134 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:18:11.134Z,1516396691.134 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-01-19T21:18:11.135Z,1516396691.135 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:18:11.135Z,1516396691.135 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-01-19T21:18:11.426Z,1516396691.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:18:11.426Z,1516396691.426 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:18:11.426Z,1516396691.426 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:18:11.427Z,1516396691.427 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:18:11.427Z,1516396691.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:18:11.427Z,1516396691.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:18:11.428Z,1516396691.428 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:18:11.428Z,1516396691.428 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:18:11.429Z,1516396691.429 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:18:11.830Z,1516396691.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-01-19T21:18:11.831Z,1516396691.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:12.228Z,1516396692.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-01-19T21:18:12.229Z,1516396692.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:12.619Z,1516396692.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-01-19T21:18:12.620Z,1516396692.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:15.709Z,1516396695.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:18:15.710Z,1516396695.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:15.796Z,1516396695.796 [DataOverHttps](INFO): Sending 240 bytes from file Logs/20180119T210901/Express0005.lzma
2018-01-19T21:18:15.865Z,1516396695.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-01-19T21:18:15.866Z,1516396695.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:16.183Z,1516396696.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:18:16.183Z,1516396696.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:16.535Z,1516396696.535 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0005.lzma.bak
2018-01-19T21:18:16.535Z,1516396696.535 [DataOverHttps](INFO): SBD MOMSN=7723923
2018-01-19T21:18:16.619Z,1516396696.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-01-19T21:18:16.620Z,1516396696.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:17.082Z,1516396697.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-01-19T21:18:17.083Z,1516396697.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:17.086Z,1516396697.086 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T21:18:17.086Z,1516396697.086 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T21:18:17.086Z,1516396697.086 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T21:18:17.381Z,1516396697.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:18:17.382Z,1516396697.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:20.516Z,1516396700.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T21:18:20.517Z,1516396700.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:20.642Z,1516396700.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-01-19T21:18:20.643Z,1516396700.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:20.996Z,1516396700.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-01-19T21:18:20.996Z,1516396700.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:21.399Z,1516396701.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-01-19T21:18:21.400Z,1516396701.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:21.800Z,1516396701.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-01-19T21:18:21.821Z,1516396701.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:22.185Z,1516396702.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:18:22.186Z,1516396702.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:22.585Z,1516396702.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:18:22.586Z,1516396702.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:22.980Z,1516396702.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:18:22.981Z,1516396702.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:23.388Z,1516396703.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:18:23.389Z,1516396703.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:23.799Z,1516396703.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-01-19T21:18:23.800Z,1516396703.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:24.229Z,1516396704.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-01-19T21:18:24.230Z,1516396704.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:24.595Z,1516396704.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-01-19T21:18:24.596Z,1516396704.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:24.995Z,1516396704.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-01-19T21:18:24.996Z,1516396704.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:25.397Z,1516396705.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-01-19T21:18:25.398Z,1516396705.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:25.803Z,1516396705.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-19T21:18:25.804Z,1516396705.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:26.218Z,1516396706.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-01-19T21:18:26.219Z,1516396706.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:26.605Z,1516396706.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-19T21:18:26.606Z,1516396706.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:27.002Z,1516396707.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-19T21:18:27.003Z,1516396707.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:27.475Z,1516396707.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-01-19T21:18:27.476Z,1516396707.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:27.779Z,1516396707.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T21:18:27.780Z,1516396707.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:28.219Z,1516396708.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-01-19T21:18:28.220Z,1516396708.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:28.631Z,1516396708.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-01-19T21:18:28.631Z,1516396708.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:29.026Z,1516396709.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-19T21:18:29.027Z,1516396709.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:29.419Z,1516396709.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-19T21:18:29.420Z,1516396709.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:29.826Z,1516396709.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-19T21:18:29.827Z,1516396709.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:30.188Z,1516396710.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:18:30.190Z,1516396710.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:30.600Z,1516396710.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-19T21:18:30.617Z,1516396710.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:30.999Z,1516396710.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:31.383Z,1516396711.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:31.788Z,1516396711.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:32.191Z,1516396712.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:32.592Z,1516396712.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:32.992Z,1516396712.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:33.390Z,1516396713.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:33.789Z,1516396713.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:34.195Z,1516396714.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:34.602Z,1516396714.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:34.991Z,1516396714.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:35.387Z,1516396715.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:35.790Z,1516396715.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:36.191Z,1516396716.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:36.596Z,1516396716.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:36.992Z,1516396716.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:37.395Z,1516396717.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:37.788Z,1516396717.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:38.192Z,1516396718.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:38.596Z,1516396718.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:38.992Z,1516396718.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:39.391Z,1516396719.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:39.789Z,1516396719.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:40.192Z,1516396720.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:40.592Z,1516396720.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:40.992Z,1516396720.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:41.389Z,1516396721.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:41.789Z,1516396721.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:42.191Z,1516396722.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:42.596Z,1516396722.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:42.993Z,1516396722.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:43.392Z,1516396723.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:43.795Z,1516396723.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:44.196Z,1516396724.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:44.596Z,1516396724.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:44.999Z,1516396724.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:45.391Z,1516396725.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:45.795Z,1516396725.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:46.195Z,1516396726.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:46.596Z,1516396726.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:47.003Z,1516396727.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:47.391Z,1516396727.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:47.795Z,1516396727.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:48.193Z,1516396728.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:48.596Z,1516396728.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:48.998Z,1516396728.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:49.380Z,1516396729.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:49.779Z,1516396729.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:50.193Z,1516396730.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:50.592Z,1516396730.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:50.997Z,1516396730.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:51.377Z,1516396731.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:51.778Z,1516396731.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:52.195Z,1516396732.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:52.664Z,1516396732.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:52.995Z,1516396732.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:53.399Z,1516396733.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:53.797Z,1516396733.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:54.207Z,1516396734.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:54.607Z,1516396734.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:55.001Z,1516396735.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:55.378Z,1516396735.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:55.803Z,1516396735.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:56.204Z,1516396736.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:56.603Z,1516396736.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:57.002Z,1516396737.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:57.383Z,1516396737.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:57.807Z,1516396737.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:58.212Z,1516396738.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:58.595Z,1516396738.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:58.000Z,1516396739.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:59.395Z,1516396739.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:18:59.789Z,1516396739.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:00.192Z,1516396740.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:00.592Z,1516396740.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:00.991Z,1516396740.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:01.395Z,1516396741.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:01.785Z,1516396741.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:02.198Z,1516396742.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:02.596Z,1516396742.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:02.992Z,1516396742.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:03.387Z,1516396743.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:03.789Z,1516396743.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:04.191Z,1516396744.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:04.595Z,1516396744.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:04.993Z,1516396744.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:05.391Z,1516396745.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:05.790Z,1516396745.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:06.190Z,1516396746.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:06.593Z,1516396746.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:06.996Z,1516396746.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:07.393Z,1516396747.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:07.791Z,1516396747.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:08.186Z,1516396748.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:08.595Z,1516396748.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:08.633Z,1516396748.633 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T21:19:08.988Z,1516396748.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:09.392Z,1516396749.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:09.792Z,1516396749.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:10.192Z,1516396750.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:10.589Z,1516396750.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:10.989Z,1516396750.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:11.395Z,1516396751.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:11.789Z,1516396751.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:12.189Z,1516396752.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:12.592Z,1516396752.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:12.991Z,1516396752.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:13.392Z,1516396753.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:13.788Z,1516396753.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:14.189Z,1516396754.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:14.595Z,1516396754.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:14.988Z,1516396754.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:15.391Z,1516396755.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:15.799Z,1516396755.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:16.196Z,1516396756.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:16.590Z,1516396756.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:16.995Z,1516396756.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:17.385Z,1516396757.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:17.792Z,1516396757.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:20.875Z,1516396760.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:21.035Z,1516396761.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:21.375Z,1516396761.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:21.766Z,1516396761.766 [PNI_TCM](ERROR): CRC does not match. Expected:0x47572 got:0x16662
2018-01-19T21:19:21.794Z,1516396761.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:22.149Z,1516396762.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:22.570Z,1516396762.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:22.952Z,1516396762.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:23.352Z,1516396763.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:23.773Z,1516396763.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:24.178Z,1516396764.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:24.551Z,1516396764.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:24.953Z,1516396764.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:25.355Z,1516396765.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:25.778Z,1516396765.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:26.149Z,1516396766.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:26.574Z,1516396766.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:26.975Z,1516396766.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:27.378Z,1516396767.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:27.747Z,1516396767.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:28.152Z,1516396768.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:28.552Z,1516396768.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:28.980Z,1516396768.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:29.352Z,1516396769.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:29.757Z,1516396769.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:30.156Z,1516396770.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:30.580Z,1516396770.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:30.946Z,1516396770.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:31.355Z,1516396771.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:31.753Z,1516396771.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:32.151Z,1516396772.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:32.555Z,1516396772.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:32.960Z,1516396772.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:33.356Z,1516396773.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:33.759Z,1516396773.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:34.150Z,1516396774.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:34.548Z,1516396774.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:34.952Z,1516396774.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:35.353Z,1516396775.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:35.752Z,1516396775.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:36.152Z,1516396776.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:36.554Z,1516396776.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:36.946Z,1516396776.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:37.354Z,1516396777.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:37.751Z,1516396777.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:38.154Z,1516396778.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:38.553Z,1516396778.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:38.959Z,1516396778.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:39.353Z,1516396779.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:39.753Z,1516396779.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:40.150Z,1516396780.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:40.547Z,1516396780.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:40.947Z,1516396780.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:41.356Z,1516396781.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:41.756Z,1516396781.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:42.152Z,1516396782.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:42.550Z,1516396782.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:42.946Z,1516396782.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:43.350Z,1516396783.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:43.750Z,1516396783.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:44.145Z,1516396784.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:44.551Z,1516396784.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:44.956Z,1516396784.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:45.355Z,1516396785.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:45.750Z,1516396785.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:46.150Z,1516396786.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:46.555Z,1516396786.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:46.950Z,1516396786.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:47.353Z,1516396787.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:47.752Z,1516396787.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:48.158Z,1516396788.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:48.547Z,1516396788.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:48.946Z,1516396788.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:49.342Z,1516396789.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:49.747Z,1516396789.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:50.145Z,1516396790.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:50.502Z,1516396790.502 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T21:19:50.502Z,1516396790.502 [NAL9602] Data Fault, FailCount= 1
2018-01-19T21:19:50.502Z,1516396790.502 [NAL9602](ERROR): Data Fault
2018-01-19T21:19:50.575Z,1516396790.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:50.592Z,1516396790.592 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T21:19:50.910Z,1516396790.910 [NAL9602](INFO): Powering down
2018-01-19T21:19:50.959Z,1516396790.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:51.346Z,1516396791.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:51.741Z,1516396791.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:51.754Z,1516396791.754 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T21:19:51.754Z,1516396791.754 [NAL9602] No Fault, FailCount= 1
2018-01-19T21:19:52.148Z,1516396792.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:52.551Z,1516396792.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:52.938Z,1516396792.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:53.348Z,1516396793.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:53.748Z,1516396793.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:54.138Z,1516396794.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:54.555Z,1516396794.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:54.948Z,1516396794.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:55.342Z,1516396795.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:55.749Z,1516396795.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:56.158Z,1516396796.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:56.548Z,1516396796.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:56.949Z,1516396796.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:57.344Z,1516396797.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:57.741Z,1516396797.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:58.149Z,1516396798.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:58.549Z,1516396798.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:58.941Z,1516396798.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:59.349Z,1516396799.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:19:59.746Z,1516396799.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:00.148Z,1516396800.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:00.549Z,1516396800.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:00.949Z,1516396800.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:01.348Z,1516396801.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:01.746Z,1516396801.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:02.147Z,1516396802.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:02.543Z,1516396802.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:02.950Z,1516396802.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:03.350Z,1516396803.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:03.747Z,1516396803.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:04.149Z,1516396804.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:04.550Z,1516396804.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:04.948Z,1516396804.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:05.346Z,1516396805.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:05.748Z,1516396805.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:06.152Z,1516396806.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:06.543Z,1516396806.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:06.948Z,1516396806.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:07.354Z,1516396807.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:07.750Z,1516396807.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:08.148Z,1516396808.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:08.546Z,1516396808.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:08.942Z,1516396808.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:09.355Z,1516396809.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:09.749Z,1516396809.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:10.149Z,1516396810.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:10.545Z,1516396810.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:10.946Z,1516396810.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:11.342Z,1516396811.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:11.747Z,1516396811.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:12.146Z,1516396812.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:12.546Z,1516396812.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:12.955Z,1516396812.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:13.349Z,1516396813.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:13.750Z,1516396813.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:14.147Z,1516396814.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:14.551Z,1516396814.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:14.956Z,1516396814.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:15.355Z,1516396815.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:15.753Z,1516396815.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:16.152Z,1516396816.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:16.548Z,1516396816.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:16.955Z,1516396816.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:17.339Z,1516396817.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:17.755Z,1516396817.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:18.155Z,1516396818.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:21.198Z,1516396821.198 [NAL9602](INFO): Powering up NAL9602
2018-01-19T21:20:21.231Z,1516396821.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:21.363Z,1516396821.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:21.722Z,1516396821.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:22.129Z,1516396822.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:22.523Z,1516396822.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:22.926Z,1516396822.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:23.325Z,1516396823.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:23.725Z,1516396823.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:24.125Z,1516396824.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:24.523Z,1516396824.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:24.935Z,1516396824.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:25.330Z,1516396825.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:25.725Z,1516396825.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:26.126Z,1516396826.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:26.525Z,1516396826.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:26.923Z,1516396826.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:27.326Z,1516396827.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:27.725Z,1516396827.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:28.121Z,1516396828.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:28.526Z,1516396828.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:28.925Z,1516396828.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:29.322Z,1516396829.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:29.725Z,1516396829.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:30.131Z,1516396830.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:30.523Z,1516396830.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:30.926Z,1516396830.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:31.325Z,1516396831.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:31.731Z,1516396831.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:32.087Z,1516396832.087 [NAL9602](INFO): NAL9602 initialized
2018-01-19T21:20:32.137Z,1516396832.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:32.528Z,1516396832.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:32.935Z,1516396832.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:33.339Z,1516396833.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:33.736Z,1516396833.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:34.127Z,1516396834.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:34.526Z,1516396834.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:34.929Z,1516396834.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:35.326Z,1516396835.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:35.743Z,1516396835.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:36.143Z,1516396836.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:36.536Z,1516396836.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:36.927Z,1516396836.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:37.327Z,1516396837.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:37.726Z,1516396837.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:38.126Z,1516396838.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:38.529Z,1516396838.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:38.937Z,1516396838.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:39.335Z,1516396839.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:39.736Z,1516396839.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:40.133Z,1516396840.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:40.528Z,1516396840.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:40.929Z,1516396840.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:41.325Z,1516396841.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:41.735Z,1516396841.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:42.137Z,1516396842.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:42.547Z,1516396842.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:42.929Z,1516396842.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:43.336Z,1516396843.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:43.738Z,1516396843.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:44.125Z,1516396844.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:44.535Z,1516396844.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:44.942Z,1516396844.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:45.336Z,1516396845.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:45.754Z,1516396845.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:46.130Z,1516396846.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:46.529Z,1516396846.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:46.929Z,1516396846.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:47.331Z,1516396847.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:47.740Z,1516396847.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:48.147Z,1516396848.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:48.540Z,1516396848.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:48.930Z,1516396848.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:49.334Z,1516396849.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:49.714Z,1516396849.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:50.118Z,1516396850.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:50.518Z,1516396850.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:50.951Z,1516396850.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:51.343Z,1516396851.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:51.747Z,1516396851.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:52.144Z,1516396852.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:52.518Z,1516396852.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:52.923Z,1516396852.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:53.347Z,1516396853.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:53.731Z,1516396853.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:54.136Z,1516396854.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:54.533Z,1516396854.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:54.925Z,1516396854.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:55.325Z,1516396855.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:55.725Z,1516396855.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:56.123Z,1516396856.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:56.527Z,1516396856.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:56.933Z,1516396856.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:57.332Z,1516396857.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:57.732Z,1516396857.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:58.131Z,1516396858.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:58.524Z,1516396858.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:58.931Z,1516396858.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:59.325Z,1516396859.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:20:59.728Z,1516396859.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:00.132Z,1516396860.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:00.532Z,1516396860.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:00.925Z,1516396860.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:01.331Z,1516396861.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:01.726Z,1516396861.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:02.125Z,1516396862.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:02.527Z,1516396862.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:02.935Z,1516396862.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:03.332Z,1516396863.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:03.732Z,1516396863.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:04.126Z,1516396864.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:04.525Z,1516396864.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:04.931Z,1516396864.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:05.327Z,1516396865.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:05.728Z,1516396865.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:06.132Z,1516396866.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:06.532Z,1516396866.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:06.924Z,1516396866.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:07.327Z,1516396867.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:07.725Z,1516396867.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:08.125Z,1516396868.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:08.527Z,1516396868.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:08.935Z,1516396868.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:09.332Z,1516396869.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:09.732Z,1516396869.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:10.131Z,1516396870.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:10.524Z,1516396870.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:10.928Z,1516396870.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:11.325Z,1516396871.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:11.728Z,1516396871.728 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:11.728Z,1516396871.728 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-01-19T21:21:11.728Z,1516396871.728 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:21:11.730Z,1516396871.730 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:11.730Z,1516396871.730 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-01-19T21:21:11.730Z,1516396871.730 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:21:11.732Z,1516396871.732 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:11.732Z,1516396871.732 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-01-19T21:21:11.732Z,1516396871.732 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:21:11.760Z,1516396871.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:21:11.760Z,1516396871.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:21:11.773Z,1516396871.773 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:21:12.162Z,1516396872.162 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:21:12.162Z,1516396872.162 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-01-19T21:21:12.163Z,1516396872.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:21:12.163Z,1516396872.163 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-01-19T21:21:12.163Z,1516396872.163 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:21:12.163Z,1516396872.163 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-01-19T21:21:12.531Z,1516396872.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:21:12.531Z,1516396872.531 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:21:12.532Z,1516396872.532 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:21:12.532Z,1516396872.532 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:21:12.532Z,1516396872.532 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:21:12.533Z,1516396872.533 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:21:12.533Z,1516396872.533 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:21:12.534Z,1516396872.534 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:21:12.534Z,1516396872.534 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:21:12.932Z,1516396872.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:21:12.934Z,1516396872.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:13.330Z,1516396873.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:21:13.331Z,1516396873.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:13.740Z,1516396873.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T21:21:13.741Z,1516396873.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:14.139Z,1516396874.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T21:21:14.140Z,1516396874.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:14.546Z,1516396874.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T21:21:14.547Z,1516396874.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:14.928Z,1516396874.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T21:21:14.930Z,1516396874.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:15.327Z,1516396875.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T21:21:15.328Z,1516396875.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:15.744Z,1516396875.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T21:21:15.746Z,1516396875.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:16.140Z,1516396876.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T21:21:16.141Z,1516396876.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:16.542Z,1516396876.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:21:16.543Z,1516396876.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:16.935Z,1516396876.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:21:16.936Z,1516396876.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:17.330Z,1516396877.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:21:17.331Z,1516396877.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:17.738Z,1516396877.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:21:17.739Z,1516396877.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:18.143Z,1516396878.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:21:18.144Z,1516396878.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:18.537Z,1516396878.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T21:21:18.538Z,1516396878.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:21.646Z,1516396881.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-01-19T21:21:21.647Z,1516396881.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:21.790Z,1516396881.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-01-19T21:21:21.791Z,1516396881.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:22.135Z,1516396882.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T21:21:22.136Z,1516396882.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:22.543Z,1516396882.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:21:22.544Z,1516396882.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:22.936Z,1516396882.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:21:22.937Z,1516396882.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:23.318Z,1516396883.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:21:23.319Z,1516396883.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:23.718Z,1516396883.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:21:23.719Z,1516396883.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:24.115Z,1516396884.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:21:24.116Z,1516396884.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:24.516Z,1516396884.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T21:21:24.517Z,1516396884.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:24.922Z,1516396884.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:21:24.923Z,1516396884.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:25.322Z,1516396885.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:21:25.323Z,1516396885.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:25.727Z,1516396885.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:21:25.728Z,1516396885.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:26.119Z,1516396886.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T21:21:26.119Z,1516396886.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:26.515Z,1516396886.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T21:21:26.516Z,1516396886.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:26.920Z,1516396886.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T21:21:26.925Z,1516396886.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:27.321Z,1516396887.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T21:21:27.322Z,1516396887.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:27.729Z,1516396887.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T21:21:27.730Z,1516396887.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:28.128Z,1516396888.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T21:21:28.129Z,1516396888.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:28.534Z,1516396888.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T21:21:28.535Z,1516396888.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:28.916Z,1516396888.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T21:21:28.917Z,1516396888.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:29.318Z,1516396889.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T21:21:29.319Z,1516396889.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:29.728Z,1516396889.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T21:21:29.729Z,1516396889.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:30.127Z,1516396890.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T21:21:30.128Z,1516396890.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:30.527Z,1516396890.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T21:21:30.528Z,1516396890.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:30.923Z,1516396890.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:21:30.924Z,1516396890.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:31.319Z,1516396891.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T21:21:31.320Z,1516396891.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:31.732Z,1516396891.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:32.135Z,1516396892.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:32.535Z,1516396892.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:32.923Z,1516396892.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:33.327Z,1516396893.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:33.732Z,1516396893.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:34.135Z,1516396894.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:34.533Z,1516396894.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:34.925Z,1516396894.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:35.319Z,1516396895.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:35.729Z,1516396895.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:36.143Z,1516396896.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:36.532Z,1516396896.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:36.922Z,1516396896.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:37.316Z,1516396897.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:37.732Z,1516396897.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:38.129Z,1516396898.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:38.528Z,1516396898.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:38.925Z,1516396898.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:39.327Z,1516396899.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:39.732Z,1516396899.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:40.133Z,1516396900.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:40.535Z,1516396900.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:40.904Z,1516396900.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:41.329Z,1516396901.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:41.731Z,1516396901.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:42.137Z,1516396902.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:42.536Z,1516396902.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:42.935Z,1516396902.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:43.303Z,1516396903.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:43.729Z,1516396903.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:44.114Z,1516396904.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:44.505Z,1516396904.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:44.943Z,1516396904.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:45.337Z,1516396905.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:45.734Z,1516396905.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:46.134Z,1516396906.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:46.517Z,1516396906.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:46.915Z,1516396906.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:47.315Z,1516396907.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:47.719Z,1516396907.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:48.120Z,1516396908.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:48.547Z,1516396908.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:48.922Z,1516396908.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:49.314Z,1516396909.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:49.727Z,1516396909.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:50.120Z,1516396910.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:50.510Z,1516396910.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:50.924Z,1516396910.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:51.334Z,1516396911.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:51.727Z,1516396911.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:52.118Z,1516396912.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:52.519Z,1516396912.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:52.918Z,1516396912.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:53.319Z,1516396913.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:53.719Z,1516396913.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:54.131Z,1516396914.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:54.528Z,1516396914.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:54.934Z,1516396914.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:55.314Z,1516396915.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:55.731Z,1516396915.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:56.120Z,1516396916.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:56.519Z,1516396916.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:56.928Z,1516396916.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:57.328Z,1516396917.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:57.735Z,1516396917.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:58.131Z,1516396918.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:58.524Z,1516396918.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:58.920Z,1516396918.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:59.327Z,1516396919.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:21:59.724Z,1516396919.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:00.134Z,1516396920.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:00.536Z,1516396920.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:00.935Z,1516396920.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:01.320Z,1516396921.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:01.724Z,1516396921.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:02.123Z,1516396922.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:02.515Z,1516396922.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:02.933Z,1516396922.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:03.335Z,1516396923.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:03.732Z,1516396923.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:04.125Z,1516396924.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:04.530Z,1516396924.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:04.916Z,1516396924.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:05.333Z,1516396925.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:05.710Z,1516396925.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:06.134Z,1516396926.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:06.541Z,1516396926.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:06.946Z,1516396926.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:07.305Z,1516396927.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:07.737Z,1516396927.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:08.116Z,1516396928.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:08.505Z,1516396928.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:08.935Z,1516396928.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:09.336Z,1516396929.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:09.735Z,1516396929.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:10.137Z,1516396930.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:10.511Z,1516396930.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:10.913Z,1516396930.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:11.320Z,1516396931.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:11.719Z,1516396931.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:12.128Z,1516396932.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:12.532Z,1516396932.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:12.931Z,1516396932.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:13.313Z,1516396933.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:13.718Z,1516396933.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:14.120Z,1516396934.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:14.516Z,1516396934.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:14.924Z,1516396934.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:15.327Z,1516396935.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:15.724Z,1516396935.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:16.117Z,1516396936.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:16.519Z,1516396936.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:16.917Z,1516396936.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:17.324Z,1516396937.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:17.722Z,1516396937.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:18.125Z,1516396938.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:18.524Z,1516396938.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:18.927Z,1516396938.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:22.007Z,1516396942.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:22.135Z,1516396942.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:22.501Z,1516396942.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:22.904Z,1516396942.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:23.303Z,1516396943.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:23.678Z,1516396943.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:24.075Z,1516396944.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:24.471Z,1516396944.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:24.884Z,1516396944.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:25.280Z,1516396945.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:25.700Z,1516396945.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:26.079Z,1516396946.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:26.479Z,1516396946.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:26.880Z,1516396946.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:27.283Z,1516396947.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:27.679Z,1516396947.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:28.087Z,1516396948.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:28.509Z,1516396948.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:28.892Z,1516396948.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:29.280Z,1516396949.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:29.682Z,1516396949.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:30.083Z,1516396950.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:30.479Z,1516396950.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:30.884Z,1516396950.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:31.289Z,1516396951.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:31.688Z,1516396951.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:32.083Z,1516396952.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:32.483Z,1516396952.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:32.883Z,1516396952.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:33.291Z,1516396953.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:33.684Z,1516396953.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:34.087Z,1516396954.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:34.490Z,1516396954.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:34.888Z,1516396954.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:35.277Z,1516396955.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:35.679Z,1516396955.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:36.079Z,1516396956.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:36.476Z,1516396956.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:36.885Z,1516396956.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:37.291Z,1516396957.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:37.691Z,1516396957.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:38.084Z,1516396958.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:38.484Z,1516396958.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:38.882Z,1516396958.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:39.281Z,1516396959.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:39.677Z,1516396959.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:40.091Z,1516396960.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:40.488Z,1516396960.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:40.888Z,1516396960.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:41.280Z,1516396961.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:41.682Z,1516396961.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:42.080Z,1516396962.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:42.477Z,1516396962.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:42.891Z,1516396962.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:43.292Z,1516396963.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:43.694Z,1516396963.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:44.082Z,1516396964.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:44.486Z,1516396964.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:44.884Z,1516396964.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:45.282Z,1516396965.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:45.684Z,1516396965.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:46.096Z,1516396966.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:46.503Z,1516396966.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:46.894Z,1516396966.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:47.285Z,1516396967.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:47.699Z,1516396967.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:48.079Z,1516396968.079 [PNI_TCM](ERROR): CRC does not match. Expected:0x38437 got:0x7410
2018-01-19T21:22:48.099Z,1516396968.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:48.480Z,1516396968.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:48.890Z,1516396968.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:49.303Z,1516396969.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:49.695Z,1516396969.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:50.085Z,1516396970.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:50.487Z,1516396970.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:50.895Z,1516396970.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:51.299Z,1516396971.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:51.695Z,1516396971.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:52.085Z,1516396972.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:52.499Z,1516396972.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:52.893Z,1516396972.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:53.295Z,1516396973.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:53.698Z,1516396973.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:54.099Z,1516396974.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:54.483Z,1516396974.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:54.899Z,1516396974.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:55.303Z,1516396975.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:55.707Z,1516396975.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:56.091Z,1516396976.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:56.496Z,1516396976.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:56.899Z,1516396976.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:57.315Z,1516396977.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:57.690Z,1516396977.690 [PNI_TCM](ERROR): CRC does not match. Expected:0x17096 got:0x31535
2018-01-19T21:22:57.715Z,1516396977.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:58.088Z,1516396978.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:58.491Z,1516396978.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:58.911Z,1516396978.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:59.277Z,1516396979.277 [PNI_TCM](ERROR): CRC does not match. Expected:0x12941 got:0x3212
2018-01-19T21:22:59.303Z,1516396979.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:22:59.688Z,1516396979.688 [PNI_TCM](ERROR): CRC does not match. Expected:0x55432 got:0x6336
2018-01-19T21:22:59.715Z,1516396979.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:00.090Z,1516396980.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:00.493Z,1516396980.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:00.893Z,1516396980.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:01.304Z,1516396981.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:01.701Z,1516396981.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:02.091Z,1516396982.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:02.497Z,1516396982.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:02.902Z,1516396982.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:03.298Z,1516396983.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:03.710Z,1516396983.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:04.093Z,1516396984.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:04.493Z,1516396984.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:04.909Z,1516396984.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:05.315Z,1516396985.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:05.697Z,1516396985.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:06.088Z,1516396986.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:06.495Z,1516396986.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:06.891Z,1516396986.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:07.302Z,1516396987.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:07.690Z,1516396987.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:08.093Z,1516396988.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:08.471Z,1516396988.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:08.904Z,1516396988.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:09.310Z,1516396989.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:09.682Z,1516396989.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:10.076Z,1516396990.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:10.476Z,1516396990.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:10.878Z,1516396990.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:11.287Z,1516396991.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:11.708Z,1516396991.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:12.076Z,1516396992.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:12.474Z,1516396992.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:12.887Z,1516396992.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:13.310Z,1516396993.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:13.683Z,1516396993.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:14.079Z,1516396994.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:14.478Z,1516396994.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:14.913Z,1516396994.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:15.317Z,1516396995.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:15.728Z,1516396995.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:16.096Z,1516396996.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:16.489Z,1516396996.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:16.929Z,1516396996.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:17.336Z,1516396997.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:17.697Z,1516396997.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:17.700Z,1516396997.700 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T21:23:17.700Z,1516396997.700 [Default:CheckIn:C.Wait] Stopped
2018-01-19T21:23:17.700Z,1516396997.700 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T21:23:17.700Z,1516396997.700 [Default:CheckIn:D] Running Loop=1
2018-01-19T21:23:18.089Z,1516396998.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:18.128Z,1516396998.128 [Default:CheckIn:D] Stopped
2018-01-19T21:23:18.128Z,1516396998.128 [Default:CheckIn:E] Running Loop=1
2018-01-19T21:23:18.484Z,1516396998.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:18.514Z,1516396998.514 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.501263 min 
2018-01-19T21:23:18.516Z,1516396998.516 [Default:CheckIn:E] Stopped
2018-01-19T21:23:18.516Z,1516396998.516 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T21:23:18.516Z,1516396998.516 [Default:CheckIn] Stopped
2018-01-19T21:23:18.516Z,1516396998.516 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T21:23:18.525Z,1516396998.525 [Default:CheckIn](INFO): Running loop #2
2018-01-19T21:23:18.525Z,1516396998.525 [Default:CheckIn] Running Loop=2
2018-01-19T21:23:18.525Z,1516396998.525 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T21:23:18.525Z,1516396998.525 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T21:23:18.969Z,1516396998.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:19.322Z,1516396999.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:23.926Z,1516397003.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:24.063Z,1516397004.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:24.393Z,1516397004.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:24.797Z,1516397004.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:25.191Z,1516397005.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:25.591Z,1516397005.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:26.023Z,1516397006.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:26.404Z,1516397006.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:26.800Z,1516397006.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:27.194Z,1516397007.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:27.599Z,1516397007.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:27.995Z,1516397007.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:28.395Z,1516397008.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:28.790Z,1516397008.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:29.222Z,1516397009.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:29.625Z,1516397009.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:29.992Z,1516397009.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:30.393Z,1516397010.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:30.790Z,1516397010.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:31.195Z,1516397011.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:31.598Z,1516397011.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:32.024Z,1516397012.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:32.399Z,1516397012.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:32.822Z,1516397012.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:33.223Z,1516397013.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:33.598Z,1516397013.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:34.036Z,1516397014.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:34.390Z,1516397014.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:34.789Z,1516397014.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:35.203Z,1516397015.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:35.604Z,1516397015.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:35.000Z,1516397016.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:36.441Z,1516397016.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:36.800Z,1516397016.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:37.199Z,1516397017.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:37.607Z,1516397017.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:38.000Z,1516397018.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:38.400Z,1516397018.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:38.804Z,1516397018.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:39.196Z,1516397019.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:39.594Z,1516397019.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:39.996Z,1516397019.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:40.400Z,1516397020.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:40.799Z,1516397020.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:41.200Z,1516397021.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:41.601Z,1516397021.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:42.011Z,1516397022.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:42.399Z,1516397022.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:42.801Z,1516397022.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:43.199Z,1516397023.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:43.595Z,1516397023.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:44.005Z,1516397024.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:44.404Z,1516397024.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:44.804Z,1516397024.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:45.193Z,1516397025.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:45.599Z,1516397025.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:46.003Z,1516397026.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:46.399Z,1516397026.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:46.803Z,1516397026.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:47.204Z,1516397027.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:47.611Z,1516397027.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:48.007Z,1516397028.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:48.408Z,1516397028.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:48.797Z,1516397028.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:49.196Z,1516397029.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:49.599Z,1516397029.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:50.004Z,1516397030.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:50.402Z,1516397030.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:50.804Z,1516397030.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:51.198Z,1516397031.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:51.595Z,1516397031.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:51.997Z,1516397031.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:52.403Z,1516397032.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:52.796Z,1516397032.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:53.204Z,1516397033.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:53.608Z,1516397033.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:54.011Z,1516397034.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:54.407Z,1516397034.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:54.799Z,1516397034.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:55.200Z,1516397035.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:55.602Z,1516397035.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:56.009Z,1516397036.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:56.404Z,1516397036.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:56.806Z,1516397036.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:57.203Z,1516397037.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:57.587Z,1516397037.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:57.999Z,1516397037.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:58.403Z,1516397038.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:58.799Z,1516397038.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:59.204Z,1516397039.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:23:59.614Z,1516397039.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:00.011Z,1516397040.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:00.401Z,1516397040.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:00.799Z,1516397040.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:01.183Z,1516397041.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:01.620Z,1516397041.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:02.008Z,1516397042.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:02.407Z,1516397042.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:02.807Z,1516397042.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:03.186Z,1516397043.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:03.611Z,1516397043.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:04.011Z,1516397044.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:04.410Z,1516397044.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:04.815Z,1516397044.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:05.209Z,1516397045.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:05.595Z,1516397045.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:05.999Z,1516397045.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:06.395Z,1516397046.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:06.791Z,1516397046.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:07.192Z,1516397047.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:07.623Z,1516397047.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:08.024Z,1516397048.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:08.394Z,1516397048.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:08.776Z,1516397048.776 [DAT](INFO): transmitted an acoustic signal
2018-01-19T21:24:08.803Z,1516397048.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:09.184Z,1516397049.184 [DAT](INFO): received an acoustic signal
2018-01-19T21:24:09.201Z,1516397049.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:09.590Z,1516397049.590 [DAT](INFO): received a bearing request message
2018-01-19T21:24:09.590Z,1516397049.590 [DAT](INFO): Read direction message, but no range.
2018-01-19T21:24:09.605Z,1516397049.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:10.004Z,1516397050.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:10.403Z,1516397050.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:10.807Z,1516397050.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:11.198Z,1516397051.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:11.594Z,1516397051.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:12.007Z,1516397052.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:12.416Z,1516397052.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:12.808Z,1516397052.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:12.808Z,1516397052.808 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-01-19T21:24:12.808Z,1516397052.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:24:12.810Z,1516397052.810 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:12.810Z,1516397052.810 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-01-19T21:24:12.810Z,1516397052.810 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:24:12.812Z,1516397052.812 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:12.812Z,1516397052.812 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-01-19T21:24:12.812Z,1516397052.812 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:24:12.840Z,1516397052.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:24:12.840Z,1516397052.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:24:12.840Z,1516397052.840 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:24:13.205Z,1516397053.205 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:24:13.205Z,1516397053.205 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-01-19T21:24:13.206Z,1516397053.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:24:13.206Z,1516397053.206 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-01-19T21:24:13.206Z,1516397053.206 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:24:13.207Z,1516397053.207 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-01-19T21:24:13.598Z,1516397053.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:24:13.598Z,1516397053.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:24:13.598Z,1516397053.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:24:13.599Z,1516397053.599 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:24:13.599Z,1516397053.599 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:24:13.599Z,1516397053.599 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:24:13.600Z,1516397053.600 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:24:13.600Z,1516397053.600 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:24:13.601Z,1516397053.601 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:24:14.013Z,1516397054.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:24:14.014Z,1516397054.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:14.412Z,1516397054.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:24:14.413Z,1516397054.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:14.807Z,1516397054.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T21:24:14.808Z,1516397054.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:15.199Z,1516397055.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T21:24:15.200Z,1516397055.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:15.604Z,1516397055.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T21:24:15.605Z,1516397055.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:16.018Z,1516397056.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T21:24:16.019Z,1516397056.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:16.413Z,1516397056.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T21:24:16.414Z,1516397056.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:16.803Z,1516397056.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T21:24:16.803Z,1516397056.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:17.199Z,1516397057.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T21:24:17.200Z,1516397057.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:17.606Z,1516397057.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:24:17.607Z,1516397057.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:18.018Z,1516397058.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:24:18.019Z,1516397058.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:18.420Z,1516397058.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:24:18.421Z,1516397058.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:18.819Z,1516397058.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:24:18.819Z,1516397058.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:19.195Z,1516397059.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:24:19.196Z,1516397059.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:19.599Z,1516397059.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T21:24:19.600Z,1516397059.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:22.738Z,1516397062.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-01-19T21:24:22.739Z,1516397062.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:22.891Z,1516397062.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-01-19T21:24:22.892Z,1516397062.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:23.271Z,1516397063.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-01-19T21:24:23.271Z,1516397063.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:23.643Z,1516397063.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:24:23.644Z,1516397063.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:24.037Z,1516397064.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:24:24.038Z,1516397064.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:24.442Z,1516397064.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:24:24.443Z,1516397064.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:24.838Z,1516397064.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:24:24.839Z,1516397064.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:25.247Z,1516397065.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:24:25.248Z,1516397065.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:25.669Z,1516397065.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-01-19T21:24:25.670Z,1516397065.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:26.051Z,1516397066.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:24:26.052Z,1516397066.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:26.447Z,1516397066.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:24:26.448Z,1516397066.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:26.844Z,1516397066.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:24:26.845Z,1516397066.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:27.238Z,1516397067.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T21:24:27.239Z,1516397067.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:27.637Z,1516397067.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T21:24:27.638Z,1516397067.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:28.108Z,1516397068.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-01-19T21:24:28.125Z,1516397068.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:28.450Z,1516397068.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T21:24:28.451Z,1516397068.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:28.858Z,1516397068.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-19T21:24:28.859Z,1516397068.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:29.250Z,1516397069.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T21:24:29.251Z,1516397069.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:29.642Z,1516397069.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T21:24:29.643Z,1516397069.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:30.050Z,1516397070.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T21:24:30.051Z,1516397070.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:30.444Z,1516397070.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T21:24:30.444Z,1516397070.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:30.838Z,1516397070.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T21:24:30.839Z,1516397070.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:31.249Z,1516397071.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T21:24:31.250Z,1516397071.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:31.658Z,1516397071.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-19T21:24:31.659Z,1516397071.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:32.050Z,1516397072.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:24:32.051Z,1516397072.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:32.450Z,1516397072.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T21:24:32.451Z,1516397072.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:32.851Z,1516397072.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:33.247Z,1516397073.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:33.647Z,1516397073.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:34.051Z,1516397074.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:34.451Z,1516397074.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:34.855Z,1516397074.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:35.243Z,1516397075.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:35.638Z,1516397075.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:36.046Z,1516397076.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:36.443Z,1516397076.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:36.839Z,1516397076.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:37.255Z,1516397077.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:37.652Z,1516397077.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:38.048Z,1516397078.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:38.451Z,1516397078.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:38.851Z,1516397078.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:39.246Z,1516397079.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:39.651Z,1516397079.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:40.051Z,1516397080.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:40.452Z,1516397080.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:40.851Z,1516397080.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:41.241Z,1516397081.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:41.638Z,1516397081.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:42.051Z,1516397082.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:42.455Z,1516397082.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:42.851Z,1516397082.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:43.246Z,1516397083.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:43.647Z,1516397083.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:44.048Z,1516397084.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:44.452Z,1516397084.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:44.855Z,1516397084.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:45.246Z,1516397085.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:45.651Z,1516397085.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:46.055Z,1516397086.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:46.452Z,1516397086.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:46.851Z,1516397086.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:47.257Z,1516397087.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:47.645Z,1516397087.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:48.058Z,1516397088.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:48.452Z,1516397088.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:48.851Z,1516397088.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:49.243Z,1516397089.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:49.640Z,1516397089.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:50.048Z,1516397090.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:50.452Z,1516397090.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:50.855Z,1516397090.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:51.246Z,1516397091.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:51.651Z,1516397091.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:52.051Z,1516397092.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:52.451Z,1516397092.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:52.855Z,1516397092.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:53.255Z,1516397093.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:53.646Z,1516397093.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:54.055Z,1516397094.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:54.455Z,1516397094.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:54.851Z,1516397094.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:55.246Z,1516397095.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:55.645Z,1516397095.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:56.054Z,1516397096.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:56.459Z,1516397096.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:56.859Z,1516397096.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:57.248Z,1516397097.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:57.651Z,1516397097.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:58.052Z,1516397098.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:58.458Z,1516397098.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:58.851Z,1516397098.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:59.251Z,1516397099.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:24:59.649Z,1516397099.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:00.059Z,1516397100.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:00.459Z,1516397100.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:00.853Z,1516397100.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:01.248Z,1516397101.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:01.647Z,1516397101.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:02.050Z,1516397102.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:02.455Z,1516397102.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:02.852Z,1516397102.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:03.247Z,1516397103.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:03.651Z,1516397103.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:04.051Z,1516397104.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:04.459Z,1516397104.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:04.855Z,1516397104.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:05.246Z,1516397105.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:05.639Z,1516397105.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:06.055Z,1516397106.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:06.452Z,1516397106.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:06.863Z,1516397106.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:07.242Z,1516397107.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:07.643Z,1516397107.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:08.056Z,1516397108.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:08.452Z,1516397108.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:08.852Z,1516397108.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:09.251Z,1516397109.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:09.646Z,1516397109.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:10.053Z,1516397110.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:10.455Z,1516397110.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:10.855Z,1516397110.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:11.247Z,1516397111.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:11.643Z,1516397111.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:12.050Z,1516397112.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:12.463Z,1516397112.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:12.855Z,1516397112.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:13.245Z,1516397113.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:13.646Z,1516397113.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:14.041Z,1516397114.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:14.452Z,1516397114.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:14.862Z,1516397114.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:15.255Z,1516397115.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:15.651Z,1516397115.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:16.043Z,1516397116.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:16.442Z,1516397116.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:16.851Z,1516397116.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:17.255Z,1516397117.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:17.652Z,1516397117.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:18.048Z,1516397118.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:18.454Z,1516397118.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:18.856Z,1516397118.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:19.235Z,1516397119.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:19.639Z,1516397119.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:22.734Z,1516397122.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:22.883Z,1516397122.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:23.263Z,1516397123.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:23.666Z,1516397123.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:24.035Z,1516397124.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:24.436Z,1516397124.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:24.834Z,1516397124.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:25.236Z,1516397125.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:25.663Z,1516397125.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:26.036Z,1516397126.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:26.438Z,1516397126.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:26.843Z,1516397126.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:27.238Z,1516397127.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:27.638Z,1516397127.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:28.040Z,1516397128.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:28.443Z,1516397128.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:28.843Z,1516397128.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:29.247Z,1516397129.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:29.638Z,1516397129.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:30.043Z,1516397130.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:30.438Z,1516397130.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:30.833Z,1516397130.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:31.239Z,1516397131.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:31.644Z,1516397131.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:32.040Z,1516397132.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:32.432Z,1516397132.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:32.833Z,1516397132.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:33.234Z,1516397133.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:33.630Z,1516397133.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:34.035Z,1516397134.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:34.446Z,1516397134.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:34.844Z,1516397134.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:35.243Z,1516397135.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:35.646Z,1516397135.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:36.034Z,1516397136.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:36.439Z,1516397136.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:36.840Z,1516397136.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:37.250Z,1516397137.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:37.644Z,1516397137.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:38.044Z,1516397138.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:38.443Z,1516397138.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:38.843Z,1516397138.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:39.234Z,1516397139.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:39.635Z,1516397139.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:40.035Z,1516397140.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:40.446Z,1516397140.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:40.844Z,1516397140.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:41.244Z,1516397141.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:41.633Z,1516397141.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:42.043Z,1516397142.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:42.434Z,1516397142.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:42.838Z,1516397142.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:43.243Z,1516397143.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:43.651Z,1516397143.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:44.048Z,1516397144.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:44.434Z,1516397144.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:44.835Z,1516397144.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:45.241Z,1516397145.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:45.635Z,1516397145.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:46.036Z,1516397146.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:46.441Z,1516397146.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:46.845Z,1516397146.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:47.248Z,1516397147.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:47.635Z,1516397147.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:48.043Z,1516397148.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:48.436Z,1516397148.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:48.842Z,1516397148.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:49.255Z,1516397149.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:49.655Z,1516397149.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:50.054Z,1516397150.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:50.428Z,1516397150.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:50.835Z,1516397150.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:51.241Z,1516397151.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:51.633Z,1516397151.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:52.047Z,1516397152.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:52.448Z,1516397152.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:52.846Z,1516397152.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:53.247Z,1516397153.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:53.633Z,1516397153.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:54.037Z,1516397154.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:54.435Z,1516397154.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:54.834Z,1516397154.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:55.243Z,1516397155.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:55.651Z,1516397155.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:56.054Z,1516397156.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:56.428Z,1516397156.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:56.835Z,1516397156.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:57.251Z,1516397157.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:57.673Z,1516397157.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:58.035Z,1516397158.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:58.445Z,1516397158.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:58.844Z,1516397158.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:59.244Z,1516397159.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:25:59.639Z,1516397159.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:00.043Z,1516397160.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:00.436Z,1516397160.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:00.837Z,1516397160.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:01.244Z,1516397161.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:01.648Z,1516397161.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:02.048Z,1516397162.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:02.427Z,1516397162.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:02.839Z,1516397162.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:03.247Z,1516397163.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:03.638Z,1516397163.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:04.039Z,1516397164.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:04.445Z,1516397164.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:04.844Z,1516397164.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:05.248Z,1516397165.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:05.639Z,1516397165.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:06.031Z,1516397166.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:06.442Z,1516397166.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:06.847Z,1516397166.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:07.240Z,1516397167.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:07.647Z,1516397167.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:08.049Z,1516397168.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:08.447Z,1516397168.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:08.843Z,1516397168.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:09.243Z,1516397169.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:09.642Z,1516397169.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:10.043Z,1516397170.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:10.445Z,1516397170.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:10.848Z,1516397170.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:11.248Z,1516397171.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:11.639Z,1516397171.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:12.039Z,1516397172.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:12.440Z,1516397172.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:12.847Z,1516397172.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:13.259Z,1516397173.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:13.652Z,1516397173.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:14.059Z,1516397174.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:14.446Z,1516397174.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:14.846Z,1516397174.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:15.238Z,1516397175.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:15.651Z,1516397175.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:16.028Z,1516397176.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:16.452Z,1516397176.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:16.855Z,1516397176.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:17.263Z,1516397177.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:17.651Z,1516397177.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:18.056Z,1516397178.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:18.435Z,1516397178.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:18.835Z,1516397178.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:19.262Z,1516397179.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:19.661Z,1516397179.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:20.063Z,1516397180.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:23.167Z,1516397183.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:23.274Z,1516397183.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:23.671Z,1516397183.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:24.076Z,1516397184.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:24.474Z,1516397184.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:24.874Z,1516397184.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:25.270Z,1516397185.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:25.661Z,1516397185.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:26.052Z,1516397186.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:26.480Z,1516397186.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:26.877Z,1516397186.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:27.279Z,1516397187.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:27.659Z,1516397187.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:28.051Z,1516397188.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:28.454Z,1516397188.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:28.851Z,1516397188.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:29.278Z,1516397189.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:29.678Z,1516397189.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:30.079Z,1516397190.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:30.457Z,1516397190.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:30.850Z,1516397190.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:31.259Z,1516397191.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:31.659Z,1516397191.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:32.054Z,1516397192.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:32.460Z,1516397192.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:32.883Z,1516397192.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:33.260Z,1516397193.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:33.663Z,1516397193.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:34.059Z,1516397194.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:34.451Z,1516397194.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:34.851Z,1516397194.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:35.283Z,1516397195.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:35.656Z,1516397195.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:36.082Z,1516397196.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:36.450Z,1516397196.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:36.853Z,1516397196.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:37.261Z,1516397197.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:37.658Z,1516397197.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:38.063Z,1516397198.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:38.471Z,1516397198.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:38.864Z,1516397198.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:39.263Z,1516397199.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:39.663Z,1516397199.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:40.067Z,1516397200.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:40.460Z,1516397200.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:40.857Z,1516397200.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:41.264Z,1516397201.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:41.667Z,1516397201.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:42.071Z,1516397202.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:42.459Z,1516397202.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:42.854Z,1516397202.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:43.258Z,1516397203.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:43.659Z,1516397203.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:44.051Z,1516397204.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:44.467Z,1516397204.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:44.871Z,1516397204.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:45.267Z,1516397205.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:45.660Z,1516397205.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:46.055Z,1516397206.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:46.457Z,1516397206.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:46.860Z,1516397206.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:47.270Z,1516397207.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:47.663Z,1516397207.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:48.064Z,1516397208.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:48.460Z,1516397208.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:48.860Z,1516397208.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:49.258Z,1516397209.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:49.675Z,1516397209.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:50.048Z,1516397210.048 [PNI_TCM](ERROR): CRC does not match. Expected:0x35490 got:0x1857
2018-01-19T21:26:50.067Z,1516397210.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:50.467Z,1516397210.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:50.863Z,1516397210.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:51.264Z,1516397211.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:51.660Z,1516397211.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:52.058Z,1516397212.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:52.463Z,1516397212.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:52.889Z,1516397212.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:53.258Z,1516397213.258 [PNI_TCM](ERROR): CRC does not match. Expected:0x45227 got:0x49482
2018-01-19T21:26:53.295Z,1516397213.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:53.668Z,1516397213.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:54.066Z,1516397214.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:54.475Z,1516397214.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:54.855Z,1516397214.855 [PNI_TCM](ERROR): CRC does not match. Expected:0x6862 got:0x3211
2018-01-19T21:26:54.875Z,1516397214.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:55.271Z,1516397215.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:55.675Z,1516397215.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:56.072Z,1516397216.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:56.475Z,1516397216.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:56.854Z,1516397216.854 [PNI_TCM](ERROR): CRC does not match. Expected:0x57724 got:0x16661
2018-01-19T21:26:56.897Z,1516397216.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:57.267Z,1516397217.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:57.690Z,1516397217.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:58.063Z,1516397218.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:58.497Z,1516397218.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:58.868Z,1516397218.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:59.287Z,1516397219.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:26:59.663Z,1516397219.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:00.061Z,1516397220.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:00.458Z,1516397220.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:00.871Z,1516397220.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:01.265Z,1516397221.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:01.675Z,1516397221.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:02.071Z,1516397222.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:02.471Z,1516397222.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:02.862Z,1516397222.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:03.274Z,1516397223.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:03.675Z,1516397223.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:04.091Z,1516397224.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:04.475Z,1516397224.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:04.857Z,1516397224.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:05.271Z,1516397225.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:05.680Z,1516397225.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:06.071Z,1516397226.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:06.463Z,1516397226.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:06.862Z,1516397226.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:07.295Z,1516397227.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:07.671Z,1516397227.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:08.078Z,1516397228.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:08.475Z,1516397228.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:08.878Z,1516397228.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:09.274Z,1516397229.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:09.671Z,1516397229.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:10.068Z,1516397230.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:10.471Z,1516397230.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:10.852Z,1516397230.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:11.272Z,1516397231.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:11.669Z,1516397231.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:12.093Z,1516397232.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:12.455Z,1516397232.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:12.865Z,1516397232.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:13.267Z,1516397233.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:13.667Z,1516397233.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:13.668Z,1516397233.668 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-01-19T21:27:13.668Z,1516397233.668 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:27:13.670Z,1516397233.670 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:13.670Z,1516397233.670 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-01-19T21:27:13.670Z,1516397233.670 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:27:13.671Z,1516397233.671 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:13.671Z,1516397233.671 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-01-19T21:27:13.672Z,1516397233.672 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:27:13.713Z,1516397233.713 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:27:13.714Z,1516397233.714 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:27:13.714Z,1516397233.714 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:27:14.111Z,1516397234.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:27:14.111Z,1516397234.111 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-01-19T21:27:14.112Z,1516397234.112 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:27:14.112Z,1516397234.112 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-01-19T21:27:14.112Z,1516397234.112 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:27:14.112Z,1516397234.112 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-01-19T21:27:14.467Z,1516397234.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:27:14.468Z,1516397234.468 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:27:14.468Z,1516397234.468 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:27:14.469Z,1516397234.469 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:27:14.470Z,1516397234.470 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:27:14.470Z,1516397234.470 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:27:14.470Z,1516397234.470 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:27:14.471Z,1516397234.471 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:27:14.471Z,1516397234.471 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:27:14.874Z,1516397234.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:27:14.875Z,1516397234.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:15.271Z,1516397235.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:27:15.272Z,1516397235.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:15.667Z,1516397235.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T21:27:15.668Z,1516397235.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:16.077Z,1516397236.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T21:27:16.078Z,1516397236.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:16.472Z,1516397236.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T21:27:16.473Z,1516397236.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:16.866Z,1516397236.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T21:27:16.867Z,1516397236.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:17.274Z,1516397237.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T21:27:17.276Z,1516397237.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:17.677Z,1516397237.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T21:27:17.678Z,1516397237.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:18.078Z,1516397238.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T21:27:18.079Z,1516397238.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:18.465Z,1516397238.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:27:18.466Z,1516397238.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:18.868Z,1516397238.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:27:18.869Z,1516397238.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:19.263Z,1516397239.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:27:19.264Z,1516397239.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:19.680Z,1516397239.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:27:19.681Z,1516397239.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:20.078Z,1516397240.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:27:20.079Z,1516397240.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:23.142Z,1516397243.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-01-19T21:27:23.143Z,1516397243.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:23.287Z,1516397243.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T21:27:23.288Z,1516397243.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:23.678Z,1516397243.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T21:27:23.679Z,1516397243.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:24.074Z,1516397244.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T21:27:24.075Z,1516397244.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:24.477Z,1516397244.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:27:24.478Z,1516397244.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:24.852Z,1516397244.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:27:24.875Z,1516397244.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:25.252Z,1516397245.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:27:25.257Z,1516397245.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:25.652Z,1516397245.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:27:25.653Z,1516397245.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:26.050Z,1516397246.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:27:26.051Z,1516397246.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:26.452Z,1516397246.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T21:27:26.453Z,1516397246.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:26.863Z,1516397246.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:27:26.864Z,1516397246.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:27.262Z,1516397247.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:27:27.263Z,1516397247.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:27.658Z,1516397247.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:27:27.659Z,1516397247.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:28.059Z,1516397248.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T21:27:28.060Z,1516397248.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:28.455Z,1516397248.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T21:27:28.456Z,1516397248.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:28.850Z,1516397248.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T21:27:28.851Z,1516397248.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:29.295Z,1516397249.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T21:27:29.296Z,1516397249.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:29.663Z,1516397249.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T21:27:29.664Z,1516397249.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:30.059Z,1516397250.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T21:27:30.060Z,1516397250.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:30.456Z,1516397250.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T21:27:30.456Z,1516397250.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:30.854Z,1516397250.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T21:27:30.855Z,1516397250.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:31.264Z,1516397251.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T21:27:31.265Z,1516397251.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:31.666Z,1516397251.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T21:27:31.667Z,1516397251.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:32.064Z,1516397252.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T21:27:32.065Z,1516397252.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:32.458Z,1516397252.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T21:27:32.459Z,1516397252.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:32.859Z,1516397252.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:27:32.860Z,1516397252.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:33.258Z,1516397253.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T21:27:33.259Z,1516397253.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:33.665Z,1516397253.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T21:27:33.666Z,1516397253.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:34.071Z,1516397254.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:34.468Z,1516397254.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:34.860Z,1516397254.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:35.259Z,1516397255.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:35.655Z,1516397255.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:36.059Z,1516397256.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:36.475Z,1516397256.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:36.867Z,1516397256.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:37.264Z,1516397257.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:37.656Z,1516397257.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:38.054Z,1516397258.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:38.454Z,1516397258.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:38.865Z,1516397258.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:39.253Z,1516397259.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:39.671Z,1516397259.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:40.075Z,1516397260.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:40.468Z,1516397260.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:40.863Z,1516397260.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:41.261Z,1516397261.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:41.666Z,1516397261.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:42.051Z,1516397262.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:42.472Z,1516397262.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:42.871Z,1516397262.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:43.268Z,1516397263.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:43.661Z,1516397263.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:44.063Z,1516397264.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:44.452Z,1516397264.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:44.865Z,1516397264.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:45.270Z,1516397265.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:45.671Z,1516397265.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:46.070Z,1516397266.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:46.467Z,1516397266.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:46.843Z,1516397266.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:47.246Z,1516397267.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:47.649Z,1516397267.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:48.046Z,1516397268.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:48.473Z,1516397268.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:48.873Z,1516397268.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:49.252Z,1516397269.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:49.675Z,1516397269.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:50.053Z,1516397270.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:50.447Z,1516397270.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:50.853Z,1516397270.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:51.254Z,1516397271.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:51.682Z,1516397271.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:52.064Z,1516397272.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:52.467Z,1516397272.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:52.851Z,1516397272.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:53.267Z,1516397273.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:53.658Z,1516397273.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:54.063Z,1516397274.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:54.467Z,1516397274.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:54.863Z,1516397274.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:55.263Z,1516397275.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:55.663Z,1516397275.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:56.058Z,1516397276.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:56.453Z,1516397276.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:56.858Z,1516397276.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:57.258Z,1516397277.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:57.667Z,1516397277.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:58.067Z,1516397278.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:58.464Z,1516397278.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:58.863Z,1516397278.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:59.252Z,1516397279.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:27:59.660Z,1516397279.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:00.057Z,1516397280.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:00.464Z,1516397280.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:00.868Z,1516397280.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:01.261Z,1516397281.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:01.655Z,1516397281.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:02.067Z,1516397282.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:02.455Z,1516397282.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:02.859Z,1516397282.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:03.261Z,1516397283.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:03.667Z,1516397283.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:04.067Z,1516397284.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:04.468Z,1516397284.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:04.860Z,1516397284.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:05.260Z,1516397285.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:05.663Z,1516397285.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:06.064Z,1516397286.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:06.468Z,1516397286.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:06.872Z,1516397286.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:07.262Z,1516397287.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:07.664Z,1516397287.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:08.062Z,1516397288.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:08.468Z,1516397288.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:08.846Z,1516397288.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:09.275Z,1516397289.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:09.675Z,1516397289.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:10.083Z,1516397290.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:10.483Z,1516397290.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:10.846Z,1516397290.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:11.252Z,1516397291.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:11.655Z,1516397291.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:12.048Z,1516397292.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:12.482Z,1516397292.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:12.879Z,1516397292.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:13.273Z,1516397293.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:13.656Z,1516397293.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:14.056Z,1516397294.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:14.456Z,1516397294.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:14.854Z,1516397294.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:15.249Z,1516397295.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:15.653Z,1516397295.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:16.082Z,1516397296.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:16.484Z,1516397296.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:16.854Z,1516397296.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:17.256Z,1516397297.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:17.651Z,1516397297.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:18.059Z,1516397298.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:18.467Z,1516397298.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:18.863Z,1516397298.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:18.867Z,1516397298.867 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T21:23:18.5Z
2018-01-19T21:28:18.867Z,1516397298.867 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T21:28:18.867Z,1516397298.867 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T21:28:19.267Z,1516397299.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:19.708Z,1516397299.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:20.060Z,1516397300.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:23.147Z,1516397303.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:23.223Z,1516397303.223 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0008.lzma
2018-01-19T21:28:23.289Z,1516397303.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:23.645Z,1516397303.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:23.975Z,1516397303.975 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0008.lzma.bak
2018-01-19T21:28:23.975Z,1516397303.975 [DataOverHttps](INFO): SBD MOMSN=7724039
2018-01-19T21:28:24.053Z,1516397304.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:24.517Z,1516397304.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:24.827Z,1516397304.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:27.977Z,1516397307.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:28.103Z,1516397308.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:28.496Z,1516397308.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:28.897Z,1516397308.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:29.299Z,1516397309.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:29.672Z,1516397309.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:32.765Z,1516397312.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:32.841Z,1516397312.841 [DataOverHttps](INFO): Sending 171 bytes from file Logs/20180119T210901/Express0009.lzma
2018-01-19T21:28:32.910Z,1516397312.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:33.250Z,1516397313.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:33.595Z,1516397313.595 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0009.lzma.bak
2018-01-19T21:28:33.595Z,1516397313.595 [DataOverHttps](INFO): SBD MOMSN=7724041
2018-01-19T21:28:33.713Z,1516397313.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:34.223Z,1516397314.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:34.226Z,1516397314.226 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T21:28:34.226Z,1516397314.226 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T21:28:34.226Z,1516397314.226 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T21:28:34.460Z,1516397314.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:39.917Z,1516397319.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:40.062Z,1516397320.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:40.419Z,1516397320.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:40.863Z,1516397320.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:41.245Z,1516397321.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:41.674Z,1516397321.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:42.028Z,1516397322.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:42.420Z,1516397322.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:42.827Z,1516397322.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:43.231Z,1516397323.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:43.622Z,1516397323.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:44.007Z,1516397324.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:44.433Z,1516397324.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:44.825Z,1516397324.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:45.227Z,1516397325.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:45.610Z,1516397325.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:46.011Z,1516397326.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:46.419Z,1516397326.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:46.823Z,1516397326.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:47.211Z,1516397327.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:47.615Z,1516397327.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:48.009Z,1516397328.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:48.423Z,1516397328.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:48.824Z,1516397328.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:49.219Z,1516397329.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:49.590Z,1516397329.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:50.016Z,1516397330.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:50.416Z,1516397330.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:50.825Z,1516397330.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:51.215Z,1516397331.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:51.594Z,1516397331.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:51.997Z,1516397331.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:52.418Z,1516397332.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:52.822Z,1516397332.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:53.222Z,1516397333.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:53.623Z,1516397333.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:53.997Z,1516397333.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:54.424Z,1516397334.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:54.831Z,1516397334.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:55.222Z,1516397335.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:55.598Z,1516397335.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:55.996Z,1516397335.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:56.423Z,1516397336.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:56.823Z,1516397336.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:57.223Z,1516397337.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:57.598Z,1516397337.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:57.998Z,1516397337.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:58.408Z,1516397338.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:58.812Z,1516397338.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:59.211Z,1516397339.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:59.595Z,1516397339.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:28:59.995Z,1516397339.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:00.409Z,1516397340.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:00.850Z,1516397340.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:01.210Z,1516397341.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:01.596Z,1516397341.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:02.007Z,1516397342.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:02.411Z,1516397342.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:02.811Z,1516397342.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:03.219Z,1516397343.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:03.606Z,1516397343.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:04.005Z,1516397344.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:04.411Z,1516397344.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:04.812Z,1516397344.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:05.211Z,1516397345.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:05.606Z,1516397345.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:06.001Z,1516397346.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:06.415Z,1516397346.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:06.819Z,1516397346.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:07.216Z,1516397347.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:07.607Z,1516397347.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:08.003Z,1516397348.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:08.409Z,1516397348.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:08.823Z,1516397348.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:08.856Z,1516397348.856 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T21:29:09.223Z,1516397349.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:09.611Z,1516397349.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:10.002Z,1516397350.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:10.411Z,1516397350.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:10.822Z,1516397350.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:11.223Z,1516397351.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:11.606Z,1516397351.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:12.002Z,1516397352.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:12.411Z,1516397352.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:12.812Z,1516397352.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:13.212Z,1516397353.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:13.611Z,1516397353.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:14.003Z,1516397354.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:14.409Z,1516397354.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:14.806Z,1516397354.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:15.203Z,1516397355.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:15.609Z,1516397355.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:16.023Z,1516397356.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:16.419Z,1516397356.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:16.805Z,1516397356.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:17.206Z,1516397357.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:17.615Z,1516397357.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:18.006Z,1516397358.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:18.411Z,1516397358.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:18.811Z,1516397358.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:19.212Z,1516397359.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:19.611Z,1516397359.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:20.007Z,1516397360.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:20.408Z,1516397360.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:20.807Z,1516397360.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:21.204Z,1516397361.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:21.614Z,1516397361.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:22.023Z,1516397362.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:22.415Z,1516397362.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:22.807Z,1516397362.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:23.203Z,1516397363.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:23.605Z,1516397363.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:24.006Z,1516397364.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:24.407Z,1516397364.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:24.813Z,1516397364.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:25.215Z,1516397365.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:25.622Z,1516397365.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:26.011Z,1516397366.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:26.402Z,1516397366.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:26.808Z,1516397366.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:27.203Z,1516397367.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:27.616Z,1516397367.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:28.020Z,1516397368.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:28.411Z,1516397368.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:28.802Z,1516397368.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:29.205Z,1516397369.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:29.603Z,1516397369.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:30.010Z,1516397370.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:30.401Z,1516397370.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:30.811Z,1516397370.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:31.215Z,1516397371.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:31.616Z,1516397371.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:32.006Z,1516397372.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:32.408Z,1516397372.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:32.807Z,1516397372.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:33.203Z,1516397373.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:33.616Z,1516397373.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:34.019Z,1516397374.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:34.415Z,1516397374.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:34.811Z,1516397374.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:37.897Z,1516397377.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:38.019Z,1516397378.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:38.390Z,1516397378.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:38.795Z,1516397378.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:39.192Z,1516397379.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:39.568Z,1516397379.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:39.981Z,1516397379.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:40.375Z,1516397380.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:40.776Z,1516397380.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:41.184Z,1516397381.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:41.576Z,1516397381.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:41.975Z,1516397381.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:42.370Z,1516397382.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:42.771Z,1516397382.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:43.170Z,1516397383.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:43.584Z,1516397383.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:43.984Z,1516397383.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:44.376Z,1516397384.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:44.774Z,1516397384.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:45.173Z,1516397385.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:45.573Z,1516397385.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:45.974Z,1516397385.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:46.373Z,1516397386.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:46.776Z,1516397386.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:47.180Z,1516397387.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:47.577Z,1516397387.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:47.973Z,1516397387.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:48.373Z,1516397388.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:48.775Z,1516397388.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:49.173Z,1516397389.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:49.576Z,1516397389.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:49.987Z,1516397389.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:50.376Z,1516397390.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:50.774Z,1516397390.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:51.172Z,1516397391.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:51.573Z,1516397391.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:51.971Z,1516397391.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:52.375Z,1516397392.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:52.787Z,1516397392.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:53.183Z,1516397393.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:53.591Z,1516397393.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:53.975Z,1516397393.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:54.373Z,1516397394.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:54.774Z,1516397394.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:55.171Z,1516397395.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:55.579Z,1516397395.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:55.984Z,1516397395.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:56.391Z,1516397396.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:56.771Z,1516397396.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:57.172Z,1516397397.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:57.578Z,1516397397.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:58.039Z,1516397398.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:58.382Z,1516397398.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:58.784Z,1516397398.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:59.199Z,1516397399.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:59.610Z,1516397399.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:29:59.983Z,1516397399.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:00.392Z,1516397400.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:00.790Z,1516397400.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:01.190Z,1516397401.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:01.582Z,1516397401.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:01.988Z,1516397401.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:02.387Z,1516397402.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:02.795Z,1516397402.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:03.189Z,1516397403.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:03.602Z,1516397403.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:03.992Z,1516397403.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:04.365Z,1516397404.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:04.788Z,1516397404.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:05.190Z,1516397405.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:05.590Z,1516397405.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:05.989Z,1516397405.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:06.369Z,1516397406.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:06.756Z,1516397406.756 [DAT](INFO): transmitted an acoustic signal
2018-01-19T21:30:06.771Z,1516397406.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:07.157Z,1516397407.157 [DAT](INFO): received an acoustic signal
2018-01-19T21:30:07.174Z,1516397407.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:07.577Z,1516397407.577 [DAT](INFO): received a bearing request message
2018-01-19T21:30:07.577Z,1516397407.577 [DAT](INFO): Read direction message, but no range.
2018-01-19T21:30:07.614Z,1516397407.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:07.973Z,1516397407.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:08.400Z,1516397408.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:08.776Z,1516397408.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:09.171Z,1516397409.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:09.579Z,1516397409.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:09.975Z,1516397409.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:10.373Z,1516397410.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:10.783Z,1516397410.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:11.186Z,1516397411.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:11.585Z,1516397411.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:11.981Z,1516397411.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:12.378Z,1516397412.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:12.779Z,1516397412.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:13.183Z,1516397413.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:13.587Z,1516397413.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:13.987Z,1516397413.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:14.384Z,1516397414.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:14.782Z,1516397414.782 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:14.782Z,1516397414.782 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-01-19T21:30:14.783Z,1516397414.783 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:30:14.784Z,1516397414.784 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:14.784Z,1516397414.784 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-01-19T21:30:14.784Z,1516397414.784 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:30:14.786Z,1516397414.786 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:14.786Z,1516397414.786 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-01-19T21:30:14.786Z,1516397414.786 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:30:14.798Z,1516397414.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:30:14.798Z,1516397414.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:30:14.798Z,1516397414.798 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:30:15.200Z,1516397415.200 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:30:15.200Z,1516397415.200 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-01-19T21:30:15.200Z,1516397415.200 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:30:15.200Z,1516397415.200 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-01-19T21:30:15.205Z,1516397415.205 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:30:15.205Z,1516397415.205 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-01-19T21:30:15.589Z,1516397415.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:30:15.590Z,1516397415.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:30:15.590Z,1516397415.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:30:15.590Z,1516397415.590 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:30:15.591Z,1516397415.591 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:30:15.591Z,1516397415.591 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:30:15.591Z,1516397415.591 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:30:15.592Z,1516397415.592 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:30:15.592Z,1516397415.592 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:30:15.993Z,1516397415.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:30:15.994Z,1516397415.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:16.387Z,1516397416.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:30:16.388Z,1516397416.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:16.791Z,1516397416.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T21:30:16.792Z,1516397416.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:17.192Z,1516397417.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T21:30:17.193Z,1516397417.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:17.574Z,1516397417.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T21:30:17.575Z,1516397417.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:17.992Z,1516397417.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T21:30:17.993Z,1516397417.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:18.368Z,1516397418.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T21:30:18.369Z,1516397418.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:18.769Z,1516397418.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T21:30:18.770Z,1516397418.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:19.174Z,1516397419.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T21:30:19.175Z,1516397419.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:19.597Z,1516397419.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:30:19.598Z,1516397419.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:19.998Z,1516397419.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:30:19.999Z,1516397419.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:20.370Z,1516397420.370 [PNI_TCM](ERROR): CRC does not match. Expected:0x3712 got:0x45058
2018-01-19T21:30:20.406Z,1516397420.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:30:20.407Z,1516397420.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:20.767Z,1516397420.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:30:20.768Z,1516397420.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:21.192Z,1516397421.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:30:21.193Z,1516397421.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:21.579Z,1516397421.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T21:30:21.580Z,1516397421.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:22.005Z,1516397422.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T21:30:22.006Z,1516397422.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:22.372Z,1516397422.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T21:30:22.374Z,1516397422.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:22.796Z,1516397422.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T21:30:22.797Z,1516397422.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:23.170Z,1516397423.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T21:30:23.171Z,1516397423.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:23.578Z,1516397423.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T21:30:23.579Z,1516397423.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:23.983Z,1516397423.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T21:30:23.984Z,1516397423.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:24.387Z,1516397424.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T21:30:24.388Z,1516397424.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:24.771Z,1516397424.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T21:30:24.773Z,1516397424.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:25.176Z,1516397425.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T21:30:25.176Z,1516397425.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:25.582Z,1516397425.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:30:25.583Z,1516397425.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:25.996Z,1516397425.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:30:25.997Z,1516397425.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:26.378Z,1516397426.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:30:26.379Z,1516397426.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:26.785Z,1516397426.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:30:26.786Z,1516397426.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:27.183Z,1516397427.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:30:27.184Z,1516397427.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:27.606Z,1516397427.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T21:30:27.607Z,1516397427.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:27.994Z,1516397427.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:30:27.995Z,1516397427.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:28.386Z,1516397428.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:30:28.387Z,1516397428.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:28.778Z,1516397428.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:30:28.779Z,1516397428.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:29.187Z,1516397429.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T21:30:29.189Z,1516397429.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:29.581Z,1516397429.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T21:30:29.582Z,1516397429.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:29.990Z,1516397429.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T21:30:29.991Z,1516397429.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:30.432Z,1516397430.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-19T21:30:30.433Z,1516397430.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:30.791Z,1516397430.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T21:30:30.792Z,1516397430.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:31.178Z,1516397431.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T21:30:31.179Z,1516397431.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:31.587Z,1516397431.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T21:30:31.588Z,1516397431.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:31.984Z,1516397431.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T21:30:31.985Z,1516397431.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:32.408Z,1516397432.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T21:30:32.408Z,1516397432.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:32.791Z,1516397432.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T21:30:32.792Z,1516397432.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:33.178Z,1516397433.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T21:30:33.179Z,1516397433.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:33.534Z,1516397433.534 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T21:30:33.534Z,1516397433.534 [NAL9602] Data Fault, FailCount= 2
2018-01-19T21:30:33.534Z,1516397433.534 [NAL9602](ERROR): Data Fault
2018-01-19T21:30:33.630Z,1516397433.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T21:30:33.631Z,1516397433.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:33.682Z,1516397433.682 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T21:30:33.934Z,1516397433.934 [NAL9602](INFO): Powering down
2018-01-19T21:30:33.987Z,1516397433.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:30:33.989Z,1516397433.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:34.367Z,1516397434.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T21:30:34.368Z,1516397434.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:34.808Z,1516397434.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:34.823Z,1516397434.823 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T21:30:34.823Z,1516397434.823 [NAL9602] No Fault, FailCount= 2
2018-01-19T21:30:35.192Z,1516397435.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:38.446Z,1516397438.446 [PNI_TCM](ERROR): CRC does not match. Expected:0x46238 got:0x49164
2018-01-19T21:30:38.446Z,1516397438.446 [PNI_TCM](ERROR): CRC does not match. Expected:0x28491 got:0x47191
2018-01-19T21:30:38.446Z,1516397438.446 [PNI_TCM](ERROR): CRC does not match. Expected:0x59374 got:0x55602
2018-01-19T21:30:38.447Z,1516397438.447 [PNI_TCM](ERROR): CRC does not match. Expected:0x2241 got:0x64269
2018-01-19T21:30:38.447Z,1516397438.447 [PNI_TCM](ERROR): CRC does not match. Expected:0x24759 got:0x65244
2018-01-19T21:30:38.448Z,1516397438.448 [PNI_TCM](ERROR): CRC does not match. Expected:0x54144 got:0x65139
2018-01-19T21:30:38.448Z,1516397438.448 [PNI_TCM](ERROR): CRC does not match. Expected:0x53612 got:0x9333
2018-01-19T21:30:38.448Z,1516397438.448 [PNI_TCM](ERROR): CRC does not match. Expected:0x30568 got:0x6774
2018-01-19T21:30:38.475Z,1516397438.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:38.631Z,1516397438.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:38.988Z,1516397438.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:39.383Z,1516397439.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:39.806Z,1516397439.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:40.210Z,1516397440.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:40.581Z,1516397440.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:40.986Z,1516397440.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:41.387Z,1516397441.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:41.782Z,1516397441.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:42.206Z,1516397442.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:42.589Z,1516397442.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:42.981Z,1516397442.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:43.428Z,1516397443.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:43.789Z,1516397443.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:44.189Z,1516397444.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:44.614Z,1516397444.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:44.983Z,1516397444.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:45.381Z,1516397445.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:45.814Z,1516397445.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:46.189Z,1516397446.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:46.659Z,1516397446.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:46.991Z,1516397446.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:47.393Z,1516397447.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:47.785Z,1516397447.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:48.190Z,1516397448.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:48.589Z,1516397448.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:48.987Z,1516397448.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:49.389Z,1516397449.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:49.786Z,1516397449.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:50.189Z,1516397450.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:50.589Z,1516397450.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:50.991Z,1516397450.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:51.380Z,1516397451.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:51.788Z,1516397451.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:52.189Z,1516397452.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:52.582Z,1516397452.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:53.015Z,1516397453.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:53.386Z,1516397453.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:53.786Z,1516397453.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:54.194Z,1516397454.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:54.589Z,1516397454.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:54.985Z,1516397454.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:55.390Z,1516397455.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:55.790Z,1516397455.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:56.188Z,1516397456.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:56.594Z,1516397456.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:56.998Z,1516397456.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:57.384Z,1516397457.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:57.799Z,1516397457.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:58.192Z,1516397458.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:58.588Z,1516397458.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:58.995Z,1516397458.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:59.393Z,1516397459.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:30:59.792Z,1516397459.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:00.192Z,1516397460.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:00.594Z,1516397460.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:00.988Z,1516397460.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:01.386Z,1516397461.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:01.786Z,1516397461.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:02.186Z,1516397462.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:02.590Z,1516397462.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:03.002Z,1516397463.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:03.383Z,1516397463.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:03.807Z,1516397463.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:04.150Z,1516397464.150 [NAL9602](INFO): Powering up NAL9602
2018-01-19T21:31:04.197Z,1516397464.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:04.595Z,1516397464.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:04.995Z,1516397464.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:05.394Z,1516397465.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:05.794Z,1516397465.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:06.192Z,1516397466.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:06.594Z,1516397466.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:06.983Z,1516397466.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:07.450Z,1516397467.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:07.799Z,1516397467.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:08.203Z,1516397468.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:08.605Z,1516397468.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:08.982Z,1516397468.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:09.375Z,1516397469.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:09.807Z,1516397469.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:10.209Z,1516397470.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:10.575Z,1516397470.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:10.980Z,1516397470.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:11.406Z,1516397471.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:11.782Z,1516397471.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:12.184Z,1516397472.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:12.582Z,1516397472.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:12.982Z,1516397472.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:13.388Z,1516397473.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:13.781Z,1516397473.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:14.178Z,1516397474.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:14.608Z,1516397474.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:15.010Z,1516397475.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:15.358Z,1516397475.358 [NAL9602](INFO): NAL9602 initialized
2018-01-19T21:31:15.411Z,1516397475.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:15.791Z,1516397475.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:16.218Z,1516397476.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:16.588Z,1516397476.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:17.016Z,1516397477.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:17.389Z,1516397477.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:17.790Z,1516397477.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:18.215Z,1516397478.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:18.600Z,1516397478.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:18.988Z,1516397478.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:19.418Z,1516397479.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:19.798Z,1516397479.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:20.186Z,1516397480.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:20.617Z,1516397480.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:21.020Z,1516397481.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:21.388Z,1516397481.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:21.791Z,1516397481.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:22.199Z,1516397482.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:22.588Z,1516397482.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:23.019Z,1516397483.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:23.419Z,1516397483.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:23.787Z,1516397483.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:24.190Z,1516397484.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:24.597Z,1516397484.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:24.999Z,1516397484.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:25.396Z,1516397485.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:25.803Z,1516397485.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:26.193Z,1516397486.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:26.599Z,1516397486.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:27.000Z,1516397487.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:27.400Z,1516397487.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:27.794Z,1516397487.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:28.203Z,1516397488.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:28.600Z,1516397488.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:29.756Z,1516397489.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:29.907Z,1516397489.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:30.255Z,1516397490.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:30.646Z,1516397490.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:31.044Z,1516397491.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:31.451Z,1516397491.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:31.856Z,1516397491.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:32.255Z,1516397492.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:32.659Z,1516397492.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:33.046Z,1516397493.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:33.448Z,1516397493.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:33.850Z,1516397493.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:34.258Z,1516397494.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:34.663Z,1516397494.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:35.063Z,1516397495.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:35.430Z,1516397495.430 [CommandLine](IMPORTANT): got command failComponent
2018-01-19T21:31:35.430Z,1516397495.430 [CommandLine](IMPORTANT): Failed components:
2018-01-19T21:31:35.430Z,1516397495.430 [CommandLine](IMPORTANT): No failed Components.
2018-01-19T21:31:35.489Z,1516397495.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:38.535Z,1516397498.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:38.662Z,1516397498.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:39.059Z,1516397499.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:39.438Z,1516397499.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:39.838Z,1516397499.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:40.236Z,1516397500.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:40.635Z,1516397500.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:41.034Z,1516397501.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:41.436Z,1516397501.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:41.839Z,1516397501.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:42.263Z,1516397502.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:42.640Z,1516397502.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:43.035Z,1516397503.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:43.435Z,1516397503.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:43.834Z,1516397503.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:44.225Z,1516397504.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:44.635Z,1516397504.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:45.039Z,1516397505.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:45.436Z,1516397505.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:45.844Z,1516397505.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:46.233Z,1516397506.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:46.643Z,1516397506.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:47.047Z,1516397507.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:47.436Z,1516397507.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:47.827Z,1516397507.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:48.228Z,1516397508.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:48.636Z,1516397508.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:49.043Z,1516397509.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:49.443Z,1516397509.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:49.834Z,1516397509.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:50.232Z,1516397510.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:50.643Z,1516397510.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:51.040Z,1516397511.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:51.443Z,1516397511.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:51.834Z,1516397511.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:52.310Z,1516397512.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:52.636Z,1516397512.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:53.036Z,1516397513.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:53.448Z,1516397513.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:53.846Z,1516397513.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:54.254Z,1516397514.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:54.651Z,1516397514.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:55.052Z,1516397515.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:55.456Z,1516397515.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:55.834Z,1516397515.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:56.222Z,1516397516.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:56.657Z,1516397516.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:57.055Z,1516397517.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:57.436Z,1516397517.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:57.831Z,1516397517.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:58.241Z,1516397518.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:58.651Z,1516397518.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:59.047Z,1516397519.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:59.437Z,1516397519.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:31:59.835Z,1516397519.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:00.235Z,1516397520.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:00.637Z,1516397520.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:01.048Z,1516397521.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:01.440Z,1516397521.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:01.838Z,1516397521.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:02.236Z,1516397522.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:02.635Z,1516397522.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:03.037Z,1516397523.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:03.448Z,1516397523.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:03.840Z,1516397523.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:04.234Z,1516397524.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:04.639Z,1516397524.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:05.036Z,1516397525.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:05.434Z,1516397525.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:05.844Z,1516397525.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:06.244Z,1516397526.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:06.637Z,1516397526.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:07.035Z,1516397527.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:07.435Z,1516397527.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:07.835Z,1516397527.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:08.235Z,1516397528.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:08.635Z,1516397528.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:09.037Z,1516397529.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:09.448Z,1516397529.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:09.840Z,1516397529.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:10.238Z,1516397530.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:10.635Z,1516397530.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:11.035Z,1516397531.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:11.434Z,1516397531.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:11.848Z,1516397531.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:12.244Z,1516397532.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:12.643Z,1516397532.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:13.039Z,1516397533.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:13.435Z,1516397533.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:13.842Z,1516397533.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:14.236Z,1516397534.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:14.639Z,1516397534.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:15.038Z,1516397535.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:15.451Z,1516397535.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:15.841Z,1516397535.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:16.241Z,1516397536.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:16.631Z,1516397536.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:17.039Z,1516397537.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:17.442Z,1516397537.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:17.846Z,1516397537.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:18.245Z,1516397538.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:18.647Z,1516397538.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:19.037Z,1516397539.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:19.432Z,1516397539.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:19.840Z,1516397539.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:20.238Z,1516397540.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:20.632Z,1516397540.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:21.039Z,1516397541.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:21.442Z,1516397541.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:21.843Z,1516397541.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:22.238Z,1516397542.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:22.632Z,1516397542.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:23.031Z,1516397543.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:23.438Z,1516397543.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:23.851Z,1516397543.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:24.243Z,1516397544.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:24.644Z,1516397544.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:25.032Z,1516397545.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:25.435Z,1516397545.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:25.832Z,1516397545.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:26.238Z,1516397546.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:26.639Z,1516397546.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:27.047Z,1516397547.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:27.443Z,1516397547.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:27.840Z,1516397547.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:28.239Z,1516397548.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:28.639Z,1516397548.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:29.040Z,1516397549.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:29.445Z,1516397549.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:29.847Z,1516397549.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:30.244Z,1516397550.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:30.647Z,1516397550.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:31.041Z,1516397551.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:31.441Z,1516397551.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:31.843Z,1516397551.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:32.244Z,1516397552.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:32.643Z,1516397552.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:33.036Z,1516397553.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:33.450Z,1516397553.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:33.851Z,1516397553.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:34.225Z,1516397554.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:34.622Z,1516397554.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:35.030Z,1516397555.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:35.415Z,1516397555.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:35.429Z,1516397555.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:35.826Z,1516397555.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:35.857Z,1516397555.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:38.965Z,1516397558.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:38.979Z,1516397558.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:39.082Z,1516397559.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:39.105Z,1516397559.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:39.469Z,1516397559.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:39.483Z,1516397559.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:39.872Z,1516397559.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:39.885Z,1516397559.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:40.264Z,1516397560.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:40.279Z,1516397560.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:40.675Z,1516397560.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:40.708Z,1516397560.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:41.088Z,1516397561.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:41.508Z,1516397561.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:41.912Z,1516397561.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:42.281Z,1516397562.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:42.682Z,1516397562.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:43.083Z,1516397563.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:43.482Z,1516397563.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:43.896Z,1516397563.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:44.300Z,1516397564.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:44.719Z,1516397564.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:45.078Z,1516397565.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:45.495Z,1516397565.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:45.886Z,1516397565.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:46.283Z,1516397566.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:46.688Z,1516397566.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:47.092Z,1516397567.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:47.498Z,1516397567.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:47.895Z,1516397567.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:48.291Z,1516397568.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:48.688Z,1516397568.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:49.090Z,1516397569.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:49.486Z,1516397569.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:49.895Z,1516397569.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:50.296Z,1516397570.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:50.696Z,1516397570.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:51.087Z,1516397571.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:51.485Z,1516397571.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:51.871Z,1516397571.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:51.892Z,1516397571.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:52.266Z,1516397572.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:52.286Z,1516397572.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:52.667Z,1516397572.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:52.689Z,1516397572.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:53.082Z,1516397573.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:53.096Z,1516397573.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:53.481Z,1516397573.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:53.495Z,1516397573.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:53.881Z,1516397573.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:53.895Z,1516397573.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:54.276Z,1516397574.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:54.291Z,1516397574.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:54.662Z,1516397574.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:54.684Z,1516397574.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:55.067Z,1516397575.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:55.090Z,1516397575.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:55.472Z,1516397575.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:55.491Z,1516397575.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:55.874Z,1516397575.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:55.901Z,1516397575.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:56.288Z,1516397576.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:56.307Z,1516397576.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:56.683Z,1516397576.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:56.697Z,1516397576.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:57.059Z,1516397577.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:57.084Z,1516397577.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:57.463Z,1516397577.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:57.495Z,1516397577.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:57.886Z,1516397577.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:57.900Z,1516397577.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:58.277Z,1516397578.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:58.291Z,1516397578.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:58.676Z,1516397578.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:58.690Z,1516397578.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:59.088Z,1516397579.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:59.102Z,1516397579.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:59.489Z,1516397579.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:59.503Z,1516397579.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:32:59.882Z,1516397579.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:32:59.897Z,1516397579.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:00.264Z,1516397580.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:00.301Z,1516397580.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:00.677Z,1516397580.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:00.692Z,1516397580.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:01.064Z,1516397581.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:01.095Z,1516397581.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:01.468Z,1516397581.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:01.496Z,1516397581.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:01.878Z,1516397581.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:01.911Z,1516397581.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:02.288Z,1516397582.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:02.303Z,1516397582.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:02.691Z,1516397582.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:02.705Z,1516397582.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:03.065Z,1516397583.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:03.091Z,1516397583.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:03.465Z,1516397583.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:03.505Z,1516397583.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:03.881Z,1516397583.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:03.895Z,1516397583.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:04.260Z,1516397584.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:04.291Z,1516397584.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:04.667Z,1516397584.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:04.696Z,1516397584.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:05.070Z,1516397585.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:05.112Z,1516397585.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:05.491Z,1516397585.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:05.506Z,1516397585.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:05.882Z,1516397585.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:05.903Z,1516397585.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:06.259Z,1516397586.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:06.298Z,1516397586.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:06.667Z,1516397586.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:06.692Z,1516397586.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:07.064Z,1516397587.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:07.094Z,1516397587.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:07.467Z,1516397587.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:07.500Z,1516397587.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:07.886Z,1516397587.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:07.900Z,1516397587.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:08.286Z,1516397588.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:08.300Z,1516397588.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:08.670Z,1516397588.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:08.702Z,1516397588.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:09.059Z,1516397589.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:09.103Z,1516397589.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:09.467Z,1516397589.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:09.498Z,1516397589.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:09.867Z,1516397589.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:09.881Z,1516397589.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:10.272Z,1516397590.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:10.287Z,1516397590.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:10.667Z,1516397590.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:10.682Z,1516397590.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:11.082Z,1516397591.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:11.115Z,1516397591.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:11.486Z,1516397591.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:11.509Z,1516397591.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:11.882Z,1516397591.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:11.912Z,1516397591.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:12.268Z,1516397592.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:12.282Z,1516397592.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:12.671Z,1516397592.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:12.691Z,1516397592.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:13.070Z,1516397593.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:13.085Z,1516397593.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:13.467Z,1516397593.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:13.480Z,1516397593.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:13.886Z,1516397593.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:13.915Z,1516397593.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:14.286Z,1516397594.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:14.314Z,1516397594.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:14.685Z,1516397594.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:14.719Z,1516397594.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:14.942Z,1516397594.942 [CommandLine](IMPORTANT): got command failComponent
2018-01-19T21:33:14.942Z,1516397594.942 [CommandLine](IMPORTANT): Failed components:
2018-01-19T21:33:14.942Z,1516397594.942 [CommandLine](IMPORTANT): No failed Components.
2018-01-19T21:33:15.071Z,1516397595.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:15.085Z,1516397595.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:15.475Z,1516397595.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:15.489Z,1516397595.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:15.874Z,1516397595.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:15.888Z,1516397595.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:15.888Z,1516397595.888 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-01-19T21:33:15.888Z,1516397595.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:33:15.890Z,1516397595.890 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:15.890Z,1516397595.890 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-01-19T21:33:15.890Z,1516397595.890 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:33:15.892Z,1516397595.892 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:15.892Z,1516397595.892 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-01-19T21:33:15.892Z,1516397595.892 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:33:15.928Z,1516397595.928 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:33:15.928Z,1516397595.928 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:33:15.928Z,1516397595.928 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:33:16.275Z,1516397596.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:16.321Z,1516397596.321 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:33:16.321Z,1516397596.321 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-01-19T21:33:16.322Z,1516397596.322 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:33:16.322Z,1516397596.322 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-01-19T21:33:16.322Z,1516397596.322 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:33:16.322Z,1516397596.322 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-01-19T21:33:16.670Z,1516397596.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:16.687Z,1516397596.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:33:16.688Z,1516397596.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:33:16.688Z,1516397596.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:33:16.689Z,1516397596.689 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:33:16.689Z,1516397596.689 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:33:16.689Z,1516397596.689 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:33:16.690Z,1516397596.690 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:33:16.690Z,1516397596.690 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:33:16.691Z,1516397596.691 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:33:17.082Z,1516397597.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:17.096Z,1516397597.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:33:17.097Z,1516397597.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:17.486Z,1516397597.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:17.499Z,1516397597.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:33:17.500Z,1516397597.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:17.885Z,1516397597.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:17.899Z,1516397597.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T21:33:17.900Z,1516397597.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:18.277Z,1516397598.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:18.290Z,1516397598.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T21:33:18.291Z,1516397598.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:18.676Z,1516397598.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:18.690Z,1516397598.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T21:33:18.691Z,1516397598.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:19.074Z,1516397599.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:19.092Z,1516397599.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T21:33:19.093Z,1516397599.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:19.463Z,1516397599.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:19.490Z,1516397599.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T21:33:19.491Z,1516397599.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:19.886Z,1516397599.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:19.900Z,1516397599.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T21:33:19.901Z,1516397599.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:20.296Z,1516397600.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:20.314Z,1516397600.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T21:33:20.315Z,1516397600.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:20.690Z,1516397600.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:20.704Z,1516397600.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:33:20.705Z,1516397600.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:21.067Z,1516397601.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:21.092Z,1516397601.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:33:21.093Z,1516397601.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:21.463Z,1516397601.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:21.494Z,1516397601.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:33:21.495Z,1516397601.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:21.863Z,1516397601.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:21.895Z,1516397601.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:33:21.896Z,1516397601.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:22.262Z,1516397602.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:22.292Z,1516397602.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:33:22.297Z,1516397602.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:22.667Z,1516397602.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:22.698Z,1516397602.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T21:33:22.699Z,1516397602.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:23.074Z,1516397603.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:23.106Z,1516397603.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T21:33:23.107Z,1516397603.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:23.486Z,1516397603.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:23.500Z,1516397603.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T21:33:23.501Z,1516397603.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:23.874Z,1516397603.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:23.906Z,1516397603.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T21:33:23.907Z,1516397603.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:24.262Z,1516397604.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:24.275Z,1516397604.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T21:33:24.276Z,1516397604.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:24.667Z,1516397604.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:24.701Z,1516397604.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T21:33:24.702Z,1516397604.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:25.064Z,1516397605.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:25.078Z,1516397605.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T21:33:25.079Z,1516397605.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:25.469Z,1516397605.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:25.483Z,1516397605.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T21:33:25.484Z,1516397605.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:25.882Z,1516397605.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:25.904Z,1516397605.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T21:33:25.905Z,1516397605.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:26.282Z,1516397606.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:26.304Z,1516397606.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T21:33:26.306Z,1516397606.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:26.674Z,1516397606.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:26.709Z,1516397606.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:33:26.710Z,1516397606.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:27.074Z,1516397607.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:27.088Z,1516397607.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:33:27.105Z,1516397607.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:27.471Z,1516397607.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:27.490Z,1516397607.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:33:27.491Z,1516397607.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:27.872Z,1516397607.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:27.886Z,1516397607.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:33:27.887Z,1516397607.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:28.273Z,1516397608.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:28.287Z,1516397608.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:33:28.288Z,1516397608.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:28.671Z,1516397608.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:28.688Z,1516397608.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T21:33:28.694Z,1516397608.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:29.079Z,1516397609.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:29.119Z,1516397609.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:33:29.120Z,1516397609.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:29.487Z,1516397609.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:29.501Z,1516397609.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:33:29.502Z,1516397609.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:29.884Z,1516397609.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:29.903Z,1516397609.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:33:29.904Z,1516397609.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:30.268Z,1516397610.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:30.294Z,1516397610.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T21:33:30.295Z,1516397610.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:30.668Z,1516397610.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:30.699Z,1516397610.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T21:33:30.699Z,1516397610.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:31.067Z,1516397611.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:31.099Z,1516397611.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T21:33:31.100Z,1516397611.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:31.463Z,1516397611.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:31.502Z,1516397611.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T21:33:31.503Z,1516397611.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:31.903Z,1516397611.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:31.923Z,1516397611.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T21:33:31.924Z,1516397611.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:32.281Z,1516397612.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:32.315Z,1516397612.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T21:33:32.316Z,1516397612.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:32.680Z,1516397612.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:32.766Z,1516397612.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-01-19T21:33:32.767Z,1516397612.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:33.069Z,1516397613.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:33.108Z,1516397613.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T21:33:33.117Z,1516397613.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:33.482Z,1516397613.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:33.524Z,1516397613.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T21:33:33.533Z,1516397613.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:33.868Z,1516397613.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:33.922Z,1516397613.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T21:33:33.923Z,1516397613.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:34.306Z,1516397614.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:34.362Z,1516397614.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-19T21:33:34.363Z,1516397614.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:34.678Z,1516397614.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:34.715Z,1516397614.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T21:33:34.715Z,1516397614.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:34.723Z,1516397614.723 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T21:33:34.723Z,1516397614.723 [Default:CheckIn:C.Wait] Stopped
2018-01-19T21:33:34.723Z,1516397614.723 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T21:33:34.723Z,1516397614.723 [Default:CheckIn:D] Running Loop=1
2018-01-19T21:33:35.086Z,1516397615.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:35.116Z,1516397615.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:33:35.117Z,1516397615.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:35.131Z,1516397615.131 [Default:CheckIn:D] Stopped
2018-01-19T21:33:35.132Z,1516397615.132 [Default:CheckIn:E] Running Loop=1
2018-01-19T21:33:35.480Z,1516397615.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:35.526Z,1516397615.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T21:33:35.527Z,1516397615.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:35.538Z,1516397615.538 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 20.785099 min 
2018-01-19T21:33:35.539Z,1516397615.539 [Default:CheckIn:E] Stopped
2018-01-19T21:33:35.539Z,1516397615.539 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T21:33:35.539Z,1516397615.539 [Default:CheckIn] Stopped
2018-01-19T21:33:35.539Z,1516397615.539 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T21:33:35.539Z,1516397615.539 [Default:CheckIn](INFO): Running loop #3
2018-01-19T21:33:35.539Z,1516397615.539 [Default:CheckIn] Running Loop=3
2018-01-19T21:33:35.539Z,1516397615.539 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T21:33:35.539Z,1516397615.539 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T21:33:35.874Z,1516397615.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:35.900Z,1516397615.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:38.952Z,1516397618.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:38.971Z,1516397618.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:39.080Z,1516397619.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:39.111Z,1516397619.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:39.470Z,1516397619.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:39.484Z,1516397619.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:39.879Z,1516397619.879 [DAT](INFO): transmitted an acoustic signal
2018-01-19T21:33:39.882Z,1516397619.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:39.912Z,1516397619.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:40.265Z,1516397620.265 [DAT](INFO): received an acoustic signal
2018-01-19T21:33:40.267Z,1516397620.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:40.299Z,1516397620.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:40.672Z,1516397620.672 [DAT](INFO): received a bearing request message
2018-01-19T21:33:40.672Z,1516397620.672 [DAT](INFO): Read direction message, but no range.
2018-01-19T21:33:40.673Z,1516397620.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:40.688Z,1516397620.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:41.071Z,1516397621.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:41.085Z,1516397621.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:41.459Z,1516397621.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:41.491Z,1516397621.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:41.869Z,1516397621.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:41.886Z,1516397621.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:42.286Z,1516397622.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:42.361Z,1516397622.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:42.666Z,1516397622.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:42.688Z,1516397622.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:43.063Z,1516397623.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:43.111Z,1516397623.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:43.464Z,1516397623.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:43.484Z,1516397623.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:43.850Z,1516397623.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:43.880Z,1516397623.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:44.262Z,1516397624.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:44.284Z,1516397624.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:44.647Z,1516397624.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:44.678Z,1516397624.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:45.070Z,1516397625.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:45.090Z,1516397625.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:45.475Z,1516397625.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:45.490Z,1516397625.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:45.869Z,1516397625.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:45.883Z,1516397625.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:46.247Z,1516397626.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:46.294Z,1516397626.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:46.663Z,1516397626.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:46.686Z,1516397626.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:47.048Z,1516397627.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:47.085Z,1516397627.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:47.449Z,1516397627.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:47.481Z,1516397627.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:47.874Z,1516397627.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:47.891Z,1516397627.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:48.271Z,1516397628.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:48.289Z,1516397628.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:48.672Z,1516397628.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:48.688Z,1516397628.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:49.052Z,1516397629.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:49.082Z,1516397629.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:49.447Z,1516397629.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:49.482Z,1516397629.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:49.855Z,1516397629.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:49.950Z,1516397629.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:50.253Z,1516397630.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:50.299Z,1516397630.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:50.655Z,1516397630.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:50.678Z,1516397630.678 [PNI_TCM](ERROR): CRC does not match. Expected:0x50948 got:0x54552
2018-01-19T21:33:50.695Z,1516397630.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:51.067Z,1516397631.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:51.102Z,1516397631.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:51.474Z,1516397631.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:51.494Z,1516397631.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:51.867Z,1516397631.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:51.891Z,1516397631.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:52.249Z,1516397632.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:52.285Z,1516397632.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:52.654Z,1516397632.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:52.684Z,1516397632.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:53.056Z,1516397633.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:53.070Z,1516397633.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:53.445Z,1516397633.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:53.459Z,1516397633.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:53.880Z,1516397633.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:53.903Z,1516397633.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:54.270Z,1516397634.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:54.298Z,1516397634.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:54.658Z,1516397634.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:54.672Z,1516397634.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:55.056Z,1516397635.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:55.075Z,1516397635.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:55.460Z,1516397635.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:55.478Z,1516397635.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:55.856Z,1516397635.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:55.875Z,1516397635.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:56.257Z,1516397636.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:56.271Z,1516397636.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:56.660Z,1516397636.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:56.674Z,1516397636.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:57.062Z,1516397637.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:57.081Z,1516397637.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:57.470Z,1516397637.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:57.484Z,1516397637.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:57.862Z,1516397637.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:57.882Z,1516397637.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:58.252Z,1516397638.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:58.276Z,1516397638.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:58.663Z,1516397638.663 [DAT](INFO): transmitted an acoustic signal
2018-01-19T21:33:58.664Z,1516397638.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:58.682Z,1516397638.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:59.063Z,1516397639.063 [DAT](INFO): received an acoustic signal
2018-01-19T21:33:59.064Z,1516397639.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:59.087Z,1516397639.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:59.460Z,1516397639.460 [DAT](INFO): received a bearing request message
2018-01-19T21:33:59.460Z,1516397639.460 [DAT](INFO): Read direction message, but no range.
2018-01-19T21:33:59.470Z,1516397639.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:59.493Z,1516397639.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:33:59.868Z,1516397639.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:33:59.883Z,1516397639.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:00.270Z,1516397640.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:00.288Z,1516397640.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:00.665Z,1516397640.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:00.687Z,1516397640.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:01.064Z,1516397641.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:01.078Z,1516397641.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:01.463Z,1516397641.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:01.477Z,1516397641.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:01.869Z,1516397641.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:01.892Z,1516397641.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:02.270Z,1516397642.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:02.284Z,1516397642.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:02.669Z,1516397642.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:02.683Z,1516397642.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:03.057Z,1516397643.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:03.071Z,1516397643.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:03.459Z,1516397643.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:03.496Z,1516397643.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:03.863Z,1516397643.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:03.877Z,1516397643.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:04.264Z,1516397644.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:04.278Z,1516397644.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:04.654Z,1516397644.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:04.676Z,1516397644.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:05.070Z,1516397645.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:05.087Z,1516397645.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:05.470Z,1516397645.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:05.484Z,1516397645.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:05.870Z,1516397645.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:05.884Z,1516397645.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:06.247Z,1516397646.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:06.280Z,1516397646.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:06.657Z,1516397646.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:06.674Z,1516397646.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:07.055Z,1516397647.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:07.077Z,1516397647.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:07.459Z,1516397647.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:07.478Z,1516397647.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:07.873Z,1516397647.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:07.887Z,1516397647.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:08.273Z,1516397648.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:08.287Z,1516397648.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:08.674Z,1516397648.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:08.687Z,1516397648.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:09.048Z,1516397649.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:09.078Z,1516397649.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:09.454Z,1516397649.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:09.483Z,1516397649.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:09.875Z,1516397649.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:09.901Z,1516397649.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:10.270Z,1516397650.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:10.284Z,1516397650.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:10.670Z,1516397650.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:10.684Z,1516397650.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:11.048Z,1516397651.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:11.078Z,1516397651.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:11.449Z,1516397651.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:11.475Z,1516397651.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:11.874Z,1516397651.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:11.888Z,1516397651.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:12.271Z,1516397652.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:12.286Z,1516397652.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:12.674Z,1516397652.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:12.689Z,1516397652.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:13.052Z,1516397653.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:13.082Z,1516397653.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:13.447Z,1516397653.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:13.483Z,1516397653.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:13.876Z,1516397653.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:13.890Z,1516397653.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:14.279Z,1516397654.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:14.293Z,1516397654.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:14.676Z,1516397654.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:14.689Z,1516397654.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:15.053Z,1516397655.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:15.084Z,1516397655.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:15.456Z,1516397655.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:15.487Z,1516397655.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:15.866Z,1516397655.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:15.894Z,1516397655.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:16.263Z,1516397656.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:16.294Z,1516397656.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:16.671Z,1516397656.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:16.703Z,1516397656.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:17.060Z,1516397657.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:17.074Z,1516397657.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:17.446Z,1516397657.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:17.468Z,1516397657.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:17.867Z,1516397657.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:17.893Z,1516397657.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:18.270Z,1516397658.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:18.284Z,1516397658.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:18.658Z,1516397658.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:18.672Z,1516397658.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:19.064Z,1516397659.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:19.079Z,1516397659.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:19.462Z,1516397659.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:19.484Z,1516397659.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:19.876Z,1516397659.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:19.928Z,1516397659.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:20.272Z,1516397660.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:20.287Z,1516397660.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:20.678Z,1516397660.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:20.696Z,1516397660.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:21.066Z,1516397661.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:21.095Z,1516397661.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:21.457Z,1516397661.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:21.487Z,1516397661.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:21.888Z,1516397661.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:21.956Z,1516397661.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:22.268Z,1516397662.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:22.291Z,1516397662.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:22.667Z,1516397662.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:22.687Z,1516397662.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:23.067Z,1516397663.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:23.151Z,1516397663.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:23.452Z,1516397663.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:23.501Z,1516397663.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:23.865Z,1516397663.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:23.947Z,1516397663.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:24.268Z,1516397664.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:24.342Z,1516397664.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:24.664Z,1516397664.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:24.714Z,1516397664.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:25.055Z,1516397665.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:25.104Z,1516397665.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:25.454Z,1516397665.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:25.508Z,1516397665.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:25.874Z,1516397665.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:25.900Z,1516397665.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:26.285Z,1516397666.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:26.300Z,1516397666.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:26.712Z,1516397666.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:26.775Z,1516397666.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:27.047Z,1516397667.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:27.082Z,1516397667.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:27.451Z,1516397667.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:27.483Z,1516397667.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:27.889Z,1516397667.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:27.912Z,1516397667.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:28.254Z,1516397668.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:28.305Z,1516397668.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:28.662Z,1516397668.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:28.706Z,1516397668.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:29.074Z,1516397669.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:29.096Z,1516397669.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:29.462Z,1516397669.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:29.499Z,1516397669.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:29.866Z,1516397669.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:29.889Z,1516397669.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:30.260Z,1516397670.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:30.274Z,1516397670.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:30.649Z,1516397670.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:30.676Z,1516397670.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:31.060Z,1516397671.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:31.101Z,1516397671.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:31.466Z,1516397671.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:31.480Z,1516397671.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:31.864Z,1516397671.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:31.883Z,1516397671.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:32.270Z,1516397672.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:32.284Z,1516397672.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:32.671Z,1516397672.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:32.685Z,1516397672.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:33.064Z,1516397673.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:33.079Z,1516397673.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:33.467Z,1516397673.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:33.487Z,1516397673.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:33.871Z,1516397673.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:33.885Z,1516397673.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:34.270Z,1516397674.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:34.284Z,1516397674.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:34.669Z,1516397674.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:34.684Z,1516397674.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:35.065Z,1516397675.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:35.079Z,1516397675.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:35.454Z,1516397675.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:35.479Z,1516397675.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:35.874Z,1516397675.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:35.890Z,1516397675.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:36.273Z,1516397676.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:36.299Z,1516397676.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:39.626Z,1516397679.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:39.641Z,1516397679.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:39.745Z,1516397679.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:39.779Z,1516397679.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:40.104Z,1516397680.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:40.131Z,1516397680.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:40.504Z,1516397680.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:40.538Z,1516397680.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:40.928Z,1516397680.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:40.947Z,1516397680.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:41.327Z,1516397681.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:41.347Z,1516397681.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:41.728Z,1516397681.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:41.742Z,1516397681.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:42.105Z,1516397682.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:42.132Z,1516397682.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:42.508Z,1516397682.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:42.535Z,1516397682.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:42.924Z,1516397682.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:42.940Z,1516397682.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:43.318Z,1516397683.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:43.349Z,1516397683.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:43.726Z,1516397683.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:43.747Z,1516397683.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:44.104Z,1516397684.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:44.143Z,1516397684.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:44.503Z,1516397684.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:44.530Z,1516397684.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:44.915Z,1516397684.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:44.930Z,1516397684.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:45.314Z,1516397685.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:45.328Z,1516397685.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:45.714Z,1516397685.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:45.730Z,1516397685.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:46.111Z,1516397686.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:46.126Z,1516397686.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:46.508Z,1516397686.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:46.522Z,1516397686.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:46.912Z,1516397686.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:46.927Z,1516397686.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:47.318Z,1516397687.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:47.333Z,1516397687.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:47.725Z,1516397687.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:47.759Z,1516397687.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:48.113Z,1516397688.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:48.127Z,1516397688.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:48.512Z,1516397688.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:48.531Z,1516397688.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:48.926Z,1516397688.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:48.956Z,1516397688.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:49.312Z,1516397689.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:49.331Z,1516397689.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:49.726Z,1516397689.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:49.755Z,1516397689.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:50.112Z,1516397690.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:50.126Z,1516397690.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:50.507Z,1516397690.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:50.521Z,1516397690.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:50.926Z,1516397690.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:50.954Z,1516397690.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:51.313Z,1516397691.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:51.327Z,1516397691.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:51.713Z,1516397691.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:51.735Z,1516397691.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:52.110Z,1516397692.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:52.128Z,1516397692.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:52.515Z,1516397692.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:52.529Z,1516397692.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:52.918Z,1516397692.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:52.933Z,1516397692.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:53.322Z,1516397693.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:53.337Z,1516397693.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:53.718Z,1516397693.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:53.735Z,1516397693.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:54.115Z,1516397694.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:54.135Z,1516397694.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:54.514Z,1516397694.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:54.528Z,1516397694.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:54.918Z,1516397694.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:54.933Z,1516397694.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:55.317Z,1516397695.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:55.332Z,1516397695.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:55.721Z,1516397695.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:55.735Z,1516397695.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:56.109Z,1516397696.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:56.122Z,1516397696.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:56.501Z,1516397696.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:56.528Z,1516397696.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:56.925Z,1516397696.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:56.940Z,1516397696.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:57.326Z,1516397697.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:57.341Z,1516397697.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:57.714Z,1516397697.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:57.744Z,1516397697.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:58.116Z,1516397698.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:58.131Z,1516397698.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:58.499Z,1516397698.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:58.527Z,1516397698.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:58.918Z,1516397698.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:58.933Z,1516397698.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:59.326Z,1516397699.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:59.347Z,1516397699.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:34:59.726Z,1516397699.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:34:59.741Z,1516397699.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:00.116Z,1516397700.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:00.131Z,1516397700.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:00.514Z,1516397700.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:00.528Z,1516397700.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:00.917Z,1516397700.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:00.932Z,1516397700.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:01.314Z,1516397701.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:01.344Z,1516397701.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:01.722Z,1516397701.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:01.737Z,1516397701.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:02.104Z,1516397702.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:02.131Z,1516397702.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:02.497Z,1516397702.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:02.531Z,1516397702.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:02.921Z,1516397702.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:02.936Z,1516397702.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:03.330Z,1516397703.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:03.344Z,1516397703.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:03.725Z,1516397703.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:03.747Z,1516397703.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:04.116Z,1516397704.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:04.131Z,1516397704.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:04.499Z,1516397704.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:04.534Z,1516397704.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:04.922Z,1516397704.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:04.937Z,1516397704.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:05.326Z,1516397705.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:05.347Z,1516397705.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:05.727Z,1516397705.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:05.741Z,1516397705.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:06.116Z,1516397706.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:06.131Z,1516397706.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:06.503Z,1516397706.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:06.526Z,1516397706.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:06.926Z,1516397706.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:06.941Z,1516397706.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:07.320Z,1516397707.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:07.340Z,1516397707.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:07.734Z,1516397707.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:07.748Z,1516397707.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:08.104Z,1516397708.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:08.142Z,1516397708.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:08.501Z,1516397708.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:08.515Z,1516397708.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:08.918Z,1516397708.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:08.942Z,1516397708.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:09.322Z,1516397709.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:09.345Z,1516397709.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:09.710Z,1516397709.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:09.737Z,1516397709.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:10.108Z,1516397710.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:10.122Z,1516397710.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:10.504Z,1516397710.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:10.537Z,1516397710.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:10.914Z,1516397710.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:10.941Z,1516397710.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:11.322Z,1516397711.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:11.357Z,1516397711.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:11.721Z,1516397711.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:11.735Z,1516397711.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:12.110Z,1516397712.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:12.124Z,1516397712.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:12.516Z,1516397712.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:12.535Z,1516397712.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:12.916Z,1516397712.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:12.930Z,1516397712.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:13.318Z,1516397713.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:13.332Z,1516397713.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:13.723Z,1516397713.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:13.737Z,1516397713.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:14.118Z,1516397714.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:14.133Z,1516397714.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:14.508Z,1516397714.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:14.527Z,1516397714.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:14.915Z,1516397714.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:14.931Z,1516397714.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:15.316Z,1516397715.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:15.331Z,1516397715.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:15.702Z,1516397715.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:15.723Z,1516397715.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:16.118Z,1516397716.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:16.133Z,1516397716.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:16.518Z,1516397716.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:16.532Z,1516397716.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:16.918Z,1516397716.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:16.933Z,1516397716.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:17.315Z,1516397717.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:17.330Z,1516397717.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:17.713Z,1516397717.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:17.727Z,1516397717.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:18.118Z,1516397718.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:18.132Z,1516397718.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:18.510Z,1516397718.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:18.531Z,1516397718.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:18.909Z,1516397718.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:18.923Z,1516397718.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:19.317Z,1516397719.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:19.332Z,1516397719.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:19.731Z,1516397719.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:19.761Z,1516397719.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:20.123Z,1516397720.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:20.149Z,1516397720.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:20.502Z,1516397720.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:20.525Z,1516397720.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:20.911Z,1516397720.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:20.926Z,1516397720.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:21.314Z,1516397721.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:21.329Z,1516397721.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:21.702Z,1516397721.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:21.723Z,1516397721.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:22.126Z,1516397722.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:22.155Z,1516397722.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:22.515Z,1516397722.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:22.535Z,1516397722.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:22.926Z,1516397722.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:22.957Z,1516397722.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:23.310Z,1516397723.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:23.328Z,1516397723.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:23.708Z,1516397723.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:23.730Z,1516397723.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:24.109Z,1516397724.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:24.124Z,1516397724.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:24.510Z,1516397724.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:24.526Z,1516397724.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:24.908Z,1516397724.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:24.922Z,1516397724.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:25.313Z,1516397725.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:25.327Z,1516397725.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:25.718Z,1516397725.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:25.734Z,1516397725.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:26.113Z,1516397726.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:26.127Z,1516397726.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:26.507Z,1516397726.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:26.521Z,1516397726.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:26.909Z,1516397726.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:26.931Z,1516397726.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:27.313Z,1516397727.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:27.327Z,1516397727.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:27.702Z,1516397727.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:27.722Z,1516397727.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:28.114Z,1516397728.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:28.129Z,1516397728.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:28.514Z,1516397728.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:28.528Z,1516397728.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:28.926Z,1516397728.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:28.958Z,1516397728.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:29.309Z,1516397729.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:29.331Z,1516397729.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:29.712Z,1516397729.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:29.726Z,1516397729.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:30.108Z,1516397730.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:30.123Z,1516397730.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:30.513Z,1516397730.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:30.528Z,1516397730.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:30.912Z,1516397730.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:30.926Z,1516397730.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:31.314Z,1516397731.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:31.329Z,1516397731.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:31.726Z,1516397731.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:31.758Z,1516397731.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:32.114Z,1516397732.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:32.128Z,1516397732.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:32.508Z,1516397732.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:32.522Z,1516397732.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:32.911Z,1516397732.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:32.931Z,1516397732.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:33.313Z,1516397733.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:33.327Z,1516397733.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:33.709Z,1516397733.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:33.723Z,1516397733.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:34.126Z,1516397734.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:34.158Z,1516397734.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:34.514Z,1516397734.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:34.528Z,1516397734.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:34.926Z,1516397734.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:34.958Z,1516397734.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:35.309Z,1516397735.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:35.332Z,1516397735.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:35.716Z,1516397735.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:35.730Z,1516397735.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:36.116Z,1516397736.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:36.130Z,1516397736.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:36.511Z,1516397736.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:36.530Z,1516397736.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:39.605Z,1516397739.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:39.619Z,1516397739.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:39.731Z,1516397739.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:39.746Z,1516397739.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:40.090Z,1516397740.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:40.119Z,1516397740.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:40.494Z,1516397740.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:40.522Z,1516397740.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:40.876Z,1516397740.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:40.891Z,1516397740.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:41.277Z,1516397741.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:41.299Z,1516397741.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:41.677Z,1516397741.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:41.699Z,1516397741.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:42.086Z,1516397742.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:42.101Z,1516397742.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:42.486Z,1516397742.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:42.500Z,1516397742.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:42.882Z,1516397742.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:42.897Z,1516397742.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:43.274Z,1516397743.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:43.292Z,1516397743.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:43.678Z,1516397743.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:43.692Z,1516397743.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:44.076Z,1516397744.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:44.102Z,1516397744.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:44.480Z,1516397744.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:44.495Z,1516397744.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:44.878Z,1516397744.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:44.896Z,1516397744.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:45.294Z,1516397745.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:45.315Z,1516397745.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:45.686Z,1516397745.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:45.701Z,1516397745.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:46.093Z,1516397746.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:46.107Z,1516397746.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:46.484Z,1516397746.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:46.499Z,1516397746.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:46.866Z,1516397746.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:46.899Z,1516397746.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:47.280Z,1516397747.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:47.294Z,1516397747.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:47.682Z,1516397747.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:47.696Z,1516397747.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:48.081Z,1516397748.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:48.112Z,1516397748.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:48.494Z,1516397748.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:48.508Z,1516397748.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:48.888Z,1516397748.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:48.910Z,1516397748.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:49.279Z,1516397749.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:49.298Z,1516397749.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:49.667Z,1516397749.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:49.711Z,1516397749.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:50.083Z,1516397750.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:50.090Z,1516397750.090 [PNI_TCM](ERROR): CRC does not match. Expected:0x7091 got:0x41728
2018-01-19T21:35:50.119Z,1516397750.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:50.482Z,1516397750.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:50.498Z,1516397750.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:50.869Z,1516397750.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:50.903Z,1516397750.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:51.290Z,1516397751.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:51.305Z,1516397751.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:51.682Z,1516397751.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:51.715Z,1516397751.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:52.091Z,1516397752.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:52.111Z,1516397752.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:52.484Z,1516397752.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:52.499Z,1516397752.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:52.863Z,1516397752.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:52.897Z,1516397752.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:53.288Z,1516397753.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:53.303Z,1516397753.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:53.666Z,1516397753.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:53.690Z,1516397753.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:54.076Z,1516397754.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:54.107Z,1516397754.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:54.498Z,1516397754.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:54.513Z,1516397754.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:54.876Z,1516397754.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:54.914Z,1516397754.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:55.264Z,1516397755.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:55.298Z,1516397755.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:55.674Z,1516397755.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:55.703Z,1516397755.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:56.064Z,1516397756.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:56.107Z,1516397756.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:56.478Z,1516397756.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:56.505Z,1516397756.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:56.881Z,1516397756.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:56.915Z,1516397756.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:57.292Z,1516397757.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:57.307Z,1516397757.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:57.694Z,1516397757.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:57.710Z,1516397757.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:58.099Z,1516397758.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:58.119Z,1516397758.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:58.476Z,1516397758.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:58.511Z,1516397758.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:58.874Z,1516397758.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:58.899Z,1516397758.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:59.276Z,1516397759.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:59.319Z,1516397759.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:35:59.672Z,1516397759.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:35:59.711Z,1516397759.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:00.088Z,1516397760.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:00.115Z,1516397760.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:00.497Z,1516397760.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:00.511Z,1516397760.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:00.886Z,1516397760.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:00.919Z,1516397760.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:01.272Z,1516397761.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:01.314Z,1516397761.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:01.676Z,1516397761.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:01.711Z,1516397761.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:02.074Z,1516397762.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:02.088Z,1516397762.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:02.476Z,1516397762.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:02.519Z,1516397762.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:02.874Z,1516397762.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:02.912Z,1516397762.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:03.288Z,1516397763.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:03.318Z,1516397763.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:03.684Z,1516397763.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:03.716Z,1516397763.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:04.086Z,1516397764.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:04.123Z,1516397764.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:04.468Z,1516397764.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:04.507Z,1516397764.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:04.875Z,1516397764.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:04.893Z,1516397764.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:05.279Z,1516397765.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:05.299Z,1516397765.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:05.673Z,1516397765.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:05.700Z,1516397765.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:06.077Z,1516397766.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:06.094Z,1516397766.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:06.492Z,1516397766.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:06.526Z,1516397766.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:06.880Z,1516397766.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:06.898Z,1516397766.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:07.273Z,1516397767.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:07.319Z,1516397767.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:07.676Z,1516397767.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:07.698Z,1516397767.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:08.072Z,1516397768.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:08.088Z,1516397768.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:08.481Z,1516397768.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:08.496Z,1516397768.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:08.875Z,1516397768.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:08.925Z,1516397768.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:09.282Z,1516397769.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:09.298Z,1516397769.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:09.687Z,1516397769.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:09.704Z,1516397769.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:10.087Z,1516397770.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:10.107Z,1516397770.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:10.480Z,1516397770.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:10.503Z,1516397770.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:10.877Z,1516397770.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:10.891Z,1516397770.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:11.280Z,1516397771.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:11.298Z,1516397771.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:11.672Z,1516397771.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:11.690Z,1516397771.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:12.084Z,1516397772.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:12.103Z,1516397772.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:12.486Z,1516397772.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:12.502Z,1516397772.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:12.885Z,1516397772.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:12.903Z,1516397772.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:13.267Z,1516397773.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:13.300Z,1516397773.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:13.671Z,1516397773.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:13.696Z,1516397773.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:14.063Z,1516397774.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:14.099Z,1516397774.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:14.472Z,1516397774.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:14.502Z,1516397774.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:14.867Z,1516397774.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:14.900Z,1516397774.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:15.291Z,1516397775.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:15.305Z,1516397775.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:15.693Z,1516397775.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:15.709Z,1516397775.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:16.078Z,1516397776.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:16.115Z,1516397776.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:16.475Z,1516397776.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:16.515Z,1516397776.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:16.871Z,1516397776.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:16.907Z,1516397776.907 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:16.907Z,1516397776.907 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-01-19T21:36:16.907Z,1516397776.907 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:36:16.913Z,1516397776.913 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:16.913Z,1516397776.913 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-01-19T21:36:16.913Z,1516397776.913 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:36:16.915Z,1516397776.915 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:16.915Z,1516397776.915 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-01-19T21:36:16.915Z,1516397776.915 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:36:16.958Z,1516397776.958 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:36:16.958Z,1516397776.958 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:36:16.958Z,1516397776.958 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:36:17.278Z,1516397777.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:17.319Z,1516397777.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:36:17.319Z,1516397777.319 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-01-19T21:36:17.320Z,1516397777.320 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:36:17.320Z,1516397777.320 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-01-19T21:36:17.320Z,1516397777.320 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:36:17.320Z,1516397777.320 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-01-19T21:36:17.675Z,1516397777.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:17.687Z,1516397777.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:36:17.688Z,1516397777.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:36:17.688Z,1516397777.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:36:17.688Z,1516397777.688 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:36:17.689Z,1516397777.689 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:36:17.689Z,1516397777.689 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:36:17.690Z,1516397777.690 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:36:17.690Z,1516397777.690 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:36:17.690Z,1516397777.690 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:36:18.100Z,1516397778.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:18.131Z,1516397778.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:36:18.132Z,1516397778.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:18.484Z,1516397778.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:18.530Z,1516397778.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:36:18.530Z,1516397778.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:18.886Z,1516397778.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:18.906Z,1516397778.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T21:36:18.907Z,1516397778.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:19.280Z,1516397779.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:19.294Z,1516397779.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T21:36:19.295Z,1516397779.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:19.675Z,1516397779.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:19.688Z,1516397779.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T21:36:19.690Z,1516397779.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:20.083Z,1516397780.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:20.096Z,1516397780.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T21:36:20.097Z,1516397780.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:20.484Z,1516397780.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:20.502Z,1516397780.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T21:36:20.503Z,1516397780.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:20.884Z,1516397780.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:20.903Z,1516397780.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T21:36:20.905Z,1516397780.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:21.279Z,1516397781.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:21.294Z,1516397781.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T21:36:21.295Z,1516397781.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:21.679Z,1516397781.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:21.698Z,1516397781.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:36:21.699Z,1516397781.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:22.079Z,1516397782.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:22.092Z,1516397782.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:36:22.093Z,1516397782.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:22.464Z,1516397782.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:22.498Z,1516397782.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:36:22.499Z,1516397782.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:22.879Z,1516397782.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:22.893Z,1516397782.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:36:22.894Z,1516397782.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:23.286Z,1516397783.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:23.306Z,1516397783.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:36:23.307Z,1516397783.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:23.690Z,1516397783.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:23.703Z,1516397783.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T21:36:23.704Z,1516397783.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:24.090Z,1516397784.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:24.103Z,1516397784.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T21:36:24.104Z,1516397784.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:24.479Z,1516397784.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:24.493Z,1516397784.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T21:36:24.494Z,1516397784.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:24.880Z,1516397784.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:24.893Z,1516397784.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T21:36:24.894Z,1516397784.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:25.280Z,1516397785.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:25.294Z,1516397785.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T21:36:25.295Z,1516397785.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:25.671Z,1516397785.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:25.693Z,1516397785.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T21:36:25.694Z,1516397785.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:26.087Z,1516397786.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:26.101Z,1516397786.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T21:36:26.103Z,1516397786.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:26.487Z,1516397786.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:26.509Z,1516397786.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T21:36:26.510Z,1516397786.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:26.890Z,1516397786.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:26.903Z,1516397786.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T21:36:26.904Z,1516397786.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:27.281Z,1516397787.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:27.295Z,1516397787.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T21:36:27.296Z,1516397787.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:27.678Z,1516397787.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:27.697Z,1516397787.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:36:27.698Z,1516397787.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:28.091Z,1516397788.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:28.105Z,1516397788.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:36:28.106Z,1516397788.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:28.495Z,1516397788.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:28.509Z,1516397788.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:36:28.510Z,1516397788.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:28.891Z,1516397788.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:28.905Z,1516397788.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:36:28.906Z,1516397788.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:29.280Z,1516397789.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:29.295Z,1516397789.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:36:29.296Z,1516397789.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:29.681Z,1516397789.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:29.695Z,1516397789.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T21:36:29.696Z,1516397789.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:30.090Z,1516397790.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:30.110Z,1516397790.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:36:30.111Z,1516397790.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:30.490Z,1516397790.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:30.510Z,1516397790.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:36:30.511Z,1516397790.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:30.891Z,1516397790.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:30.905Z,1516397790.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:36:30.906Z,1516397790.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:31.281Z,1516397791.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:31.295Z,1516397791.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T21:36:31.296Z,1516397791.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:31.668Z,1516397791.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:31.698Z,1516397791.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T21:36:31.699Z,1516397791.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:32.081Z,1516397792.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:32.106Z,1516397792.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T21:36:32.107Z,1516397792.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:32.486Z,1516397792.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:32.506Z,1516397792.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T21:36:32.507Z,1516397792.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:32.890Z,1516397792.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:32.904Z,1516397792.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T21:36:32.905Z,1516397792.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:33.268Z,1516397793.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:33.296Z,1516397793.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T21:36:33.297Z,1516397793.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:33.665Z,1516397793.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:33.699Z,1516397793.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T21:36:33.700Z,1516397793.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:34.086Z,1516397794.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:34.106Z,1516397794.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T21:36:34.107Z,1516397794.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:34.490Z,1516397794.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:34.505Z,1516397794.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T21:36:34.506Z,1516397794.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:34.886Z,1516397794.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:34.908Z,1516397794.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T21:36:34.909Z,1516397794.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:35.269Z,1516397795.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:35.303Z,1516397795.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T21:36:35.304Z,1516397795.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:35.664Z,1516397795.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:35.700Z,1516397795.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T21:36:35.701Z,1516397795.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:36.091Z,1516397796.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:36.111Z,1516397796.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:36:36.112Z,1516397796.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:36.494Z,1516397796.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:36.507Z,1516397796.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T21:36:36.508Z,1516397796.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:36.888Z,1516397796.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:36.901Z,1516397796.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T21:36:36.902Z,1516397796.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:39.984Z,1516397799.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:39.999Z,1516397799.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:40.098Z,1516397800.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:40.146Z,1516397800.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:40.470Z,1516397800.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:40.493Z,1516397800.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:40.866Z,1516397800.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:40.892Z,1516397800.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:41.262Z,1516397801.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:41.276Z,1516397801.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:41.652Z,1516397801.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:41.671Z,1516397801.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:42.052Z,1516397802.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:42.066Z,1516397802.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:42.453Z,1516397802.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:42.467Z,1516397802.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:42.852Z,1516397802.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:42.871Z,1516397802.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:43.266Z,1516397803.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:43.280Z,1516397803.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:43.666Z,1516397803.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:43.680Z,1516397803.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:44.070Z,1516397804.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:44.084Z,1516397804.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:44.460Z,1516397804.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:44.473Z,1516397804.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:44.859Z,1516397804.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:44.879Z,1516397804.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:45.259Z,1516397805.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:45.273Z,1516397805.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:45.661Z,1516397805.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:45.675Z,1516397805.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:46.059Z,1516397806.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:46.075Z,1516397806.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:46.460Z,1516397806.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:46.479Z,1516397806.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:46.870Z,1516397806.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:46.891Z,1516397806.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:47.270Z,1516397807.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:47.284Z,1516397807.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:47.647Z,1516397807.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:47.672Z,1516397807.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:48.043Z,1516397808.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:48.079Z,1516397808.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:48.452Z,1516397808.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:48.478Z,1516397808.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:48.847Z,1516397808.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:48.872Z,1516397808.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:49.263Z,1516397809.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:49.277Z,1516397809.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:49.670Z,1516397809.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:49.684Z,1516397809.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:50.066Z,1516397810.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:50.080Z,1516397810.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:50.443Z,1516397810.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:50.475Z,1516397810.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:50.851Z,1516397810.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:50.876Z,1516397810.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:51.247Z,1516397811.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:51.272Z,1516397811.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:51.644Z,1516397811.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:51.675Z,1516397811.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:52.051Z,1516397812.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:52.076Z,1516397812.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:52.466Z,1516397812.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:52.480Z,1516397812.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:52.866Z,1516397812.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:52.880Z,1516397812.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:53.270Z,1516397813.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:53.284Z,1516397813.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:53.647Z,1516397813.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:53.672Z,1516397813.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:54.043Z,1516397814.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:54.075Z,1516397814.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:54.452Z,1516397814.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:54.478Z,1516397814.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:54.847Z,1516397814.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:54.872Z,1516397814.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:55.258Z,1516397815.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:55.289Z,1516397815.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:55.674Z,1516397815.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:55.688Z,1516397815.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:56.066Z,1516397816.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:56.080Z,1516397816.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:56.444Z,1516397816.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:56.475Z,1516397816.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:56.847Z,1516397816.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:56.872Z,1516397816.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:57.247Z,1516397817.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:57.295Z,1516397817.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:57.652Z,1516397817.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:57.678Z,1516397817.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:58.051Z,1516397818.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:58.076Z,1516397818.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:58.466Z,1516397818.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:58.480Z,1516397818.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:58.866Z,1516397818.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:58.880Z,1516397818.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:59.270Z,1516397819.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:59.284Z,1516397819.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:36:59.647Z,1516397819.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:36:59.672Z,1516397819.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:00.043Z,1516397820.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:00.079Z,1516397820.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:00.448Z,1516397820.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:00.475Z,1516397820.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:00.851Z,1516397820.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:00.877Z,1516397820.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:01.271Z,1516397821.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:01.285Z,1516397821.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:01.668Z,1516397821.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:01.687Z,1516397821.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:02.066Z,1516397822.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:02.080Z,1516397822.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:02.444Z,1516397822.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:02.479Z,1516397822.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:02.850Z,1516397822.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:02.876Z,1516397822.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:03.247Z,1516397823.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:03.282Z,1516397823.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:03.644Z,1516397823.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:03.682Z,1516397823.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:04.052Z,1516397824.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:04.078Z,1516397824.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:04.462Z,1516397824.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:04.484Z,1516397824.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:04.866Z,1516397824.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:04.885Z,1516397824.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:05.270Z,1516397825.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:05.291Z,1516397825.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:05.647Z,1516397825.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:05.678Z,1516397825.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:06.043Z,1516397826.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:06.080Z,1516397826.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:06.452Z,1516397826.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:06.478Z,1516397826.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:06.847Z,1516397826.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:06.878Z,1516397826.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:07.272Z,1516397827.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:07.286Z,1516397827.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:07.666Z,1516397827.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:07.683Z,1516397827.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:08.062Z,1516397828.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:08.084Z,1516397828.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:08.444Z,1516397828.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:08.480Z,1516397828.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:08.852Z,1516397828.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:08.878Z,1516397828.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:09.247Z,1516397829.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:09.283Z,1516397829.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:09.648Z,1516397829.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:09.684Z,1516397829.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:10.051Z,1516397830.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:10.078Z,1516397830.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:10.466Z,1516397830.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:10.487Z,1516397830.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:10.867Z,1516397830.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:10.882Z,1516397830.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:11.266Z,1516397831.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:11.281Z,1516397831.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:11.647Z,1516397831.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:11.678Z,1516397831.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:12.051Z,1516397832.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:12.084Z,1516397832.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:12.452Z,1516397832.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:12.482Z,1516397832.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:12.851Z,1516397832.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:12.882Z,1516397832.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:13.261Z,1516397833.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:13.288Z,1516397833.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:13.658Z,1516397833.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:13.683Z,1516397833.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:14.058Z,1516397834.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:14.091Z,1516397834.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:14.448Z,1516397834.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:14.462Z,1516397834.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:14.848Z,1516397834.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:14.863Z,1516397834.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:15.256Z,1516397835.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:15.291Z,1516397835.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:15.657Z,1516397835.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:15.671Z,1516397835.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:16.048Z,1516397836.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:16.063Z,1516397836.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:16.467Z,1516397836.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:16.510Z,1516397836.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:16.871Z,1516397836.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:16.901Z,1516397836.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:17.258Z,1516397837.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:17.273Z,1516397837.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:17.652Z,1516397837.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:17.671Z,1516397837.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:18.056Z,1516397838.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:18.070Z,1516397838.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:18.453Z,1516397838.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:18.468Z,1516397838.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:18.852Z,1516397838.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:18.871Z,1516397838.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:19.254Z,1516397839.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:19.268Z,1516397839.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:19.658Z,1516397839.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:19.672Z,1516397839.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:20.062Z,1516397840.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:20.076Z,1516397840.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:20.456Z,1516397840.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:20.470Z,1516397840.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:20.851Z,1516397840.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:20.871Z,1516397840.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:21.252Z,1516397841.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:21.271Z,1516397841.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:21.657Z,1516397841.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:21.671Z,1516397841.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:22.052Z,1516397842.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:22.067Z,1516397842.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:22.470Z,1516397842.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:22.499Z,1516397842.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:22.858Z,1516397842.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:22.878Z,1516397842.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:23.254Z,1516397843.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:23.275Z,1516397843.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:23.652Z,1516397843.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:23.667Z,1516397843.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:24.056Z,1516397844.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:24.070Z,1516397844.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:24.457Z,1516397844.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:24.471Z,1516397844.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:24.855Z,1516397844.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:24.875Z,1516397844.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:25.266Z,1516397845.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:25.280Z,1516397845.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:25.654Z,1516397845.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:25.668Z,1516397845.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:26.062Z,1516397846.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:26.076Z,1516397846.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:26.456Z,1516397846.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:26.470Z,1516397846.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:26.856Z,1516397846.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:26.875Z,1516397846.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:27.252Z,1516397847.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:27.271Z,1516397847.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:27.657Z,1516397847.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:27.671Z,1516397847.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:28.052Z,1516397848.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:28.066Z,1516397848.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:28.462Z,1516397848.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:28.476Z,1516397848.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:28.870Z,1516397848.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:28.902Z,1516397848.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:29.254Z,1516397849.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:29.275Z,1516397849.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:29.656Z,1516397849.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:29.675Z,1516397849.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:30.052Z,1516397850.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:30.066Z,1516397850.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:30.457Z,1516397850.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:30.471Z,1516397850.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:30.852Z,1516397850.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:30.871Z,1516397850.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:31.266Z,1516397851.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:31.280Z,1516397851.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:31.654Z,1516397851.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:31.668Z,1516397851.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:32.070Z,1516397852.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:32.100Z,1516397852.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:32.452Z,1516397852.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:32.466Z,1516397852.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:32.851Z,1516397852.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:32.865Z,1516397852.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:33.252Z,1516397853.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:33.271Z,1516397853.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:33.655Z,1516397853.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:33.669Z,1516397853.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:34.049Z,1516397854.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:34.068Z,1516397854.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:34.462Z,1516397854.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:34.477Z,1516397854.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:34.861Z,1516397854.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:34.875Z,1516397854.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:35.258Z,1516397855.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:35.280Z,1516397855.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:35.659Z,1516397855.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:35.674Z,1516397855.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:36.053Z,1516397856.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:36.070Z,1516397856.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:36.460Z,1516397856.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:36.475Z,1516397856.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:36.855Z,1516397856.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:36.870Z,1516397856.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:37.263Z,1516397857.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:37.277Z,1516397857.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:40.362Z,1516397860.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:40.378Z,1516397860.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:40.500Z,1516397860.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:40.531Z,1516397860.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:40.826Z,1516397860.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:40.859Z,1516397860.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:41.235Z,1516397861.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:41.264Z,1516397861.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:41.626Z,1516397861.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:41.640Z,1516397861.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:42.031Z,1516397862.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:42.067Z,1516397862.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:42.438Z,1516397862.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:42.452Z,1516397862.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:42.842Z,1516397862.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:42.856Z,1516397862.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:43.246Z,1516397863.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:43.260Z,1516397863.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:43.637Z,1516397863.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:43.651Z,1516397863.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:44.023Z,1516397864.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:44.045Z,1516397864.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:44.428Z,1516397864.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:44.450Z,1516397864.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:44.828Z,1516397864.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:44.842Z,1516397864.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:45.234Z,1516397865.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:45.261Z,1516397865.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:45.643Z,1516397865.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:45.656Z,1516397865.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:46.038Z,1516397866.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:46.058Z,1516397866.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:46.421Z,1516397866.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:46.442Z,1516397866.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:46.835Z,1516397866.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:46.851Z,1516397866.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:47.225Z,1516397867.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:47.255Z,1516397867.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:47.635Z,1516397867.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:47.655Z,1516397867.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:48.035Z,1516397868.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:48.049Z,1516397868.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:48.442Z,1516397868.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:48.456Z,1516397868.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:48.838Z,1516397868.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:48.867Z,1516397868.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:49.245Z,1516397869.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:49.259Z,1516397869.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:49.620Z,1516397869.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:49.655Z,1516397869.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:50.032Z,1516397870.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:50.047Z,1516397870.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:50.430Z,1516397870.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:50.450Z,1516397870.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:50.819Z,1516397870.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:50.852Z,1516397870.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:51.234Z,1516397871.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:51.261Z,1516397871.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:51.649Z,1516397871.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:51.664Z,1516397871.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:52.048Z,1516397872.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:52.062Z,1516397872.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:52.421Z,1516397872.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:52.447Z,1516397872.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:52.827Z,1516397872.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:52.859Z,1516397872.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:53.219Z,1516397873.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:53.247Z,1516397873.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:53.620Z,1516397873.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:53.646Z,1516397873.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:54.035Z,1516397874.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:54.061Z,1516397874.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:54.430Z,1516397874.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:54.464Z,1516397874.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:54.850Z,1516397874.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:54.864Z,1516397874.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:55.234Z,1516397875.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:55.272Z,1516397875.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:55.631Z,1516397875.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:55.662Z,1516397875.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:56.028Z,1516397876.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:56.051Z,1516397876.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:56.425Z,1516397876.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:56.439Z,1516397876.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:56.824Z,1516397876.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:56.838Z,1516397876.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:57.234Z,1516397877.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:57.248Z,1516397877.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:57.646Z,1516397877.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:57.670Z,1516397877.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:58.034Z,1516397878.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:58.048Z,1516397878.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:58.424Z,1516397878.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:58.438Z,1516397878.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:58.831Z,1516397878.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:58.851Z,1516397878.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:59.228Z,1516397879.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:59.242Z,1516397879.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:37:59.629Z,1516397879.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:37:59.644Z,1516397879.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:00.031Z,1516397880.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:00.051Z,1516397880.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:00.442Z,1516397880.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:00.456Z,1516397880.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:00.842Z,1516397880.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:00.856Z,1516397880.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:01.246Z,1516397881.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:01.275Z,1516397881.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:01.632Z,1516397881.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:01.646Z,1516397881.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:02.032Z,1516397882.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:02.047Z,1516397882.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:02.433Z,1516397882.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:02.455Z,1516397882.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:02.828Z,1516397882.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:02.842Z,1516397882.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:03.234Z,1516397883.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:03.248Z,1516397883.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:03.642Z,1516397883.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:03.656Z,1516397883.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:04.045Z,1516397884.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:04.059Z,1516397884.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:04.424Z,1516397884.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:04.442Z,1516397884.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:04.829Z,1516397884.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:04.847Z,1516397884.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:05.228Z,1516397885.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:05.246Z,1516397885.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:05.633Z,1516397885.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:05.647Z,1516397885.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:06.029Z,1516397886.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:06.051Z,1516397886.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:06.441Z,1516397886.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:06.455Z,1516397886.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:06.841Z,1516397886.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:06.863Z,1516397886.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:07.241Z,1516397887.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:07.255Z,1516397887.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:07.636Z,1516397887.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:07.650Z,1516397887.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:08.035Z,1516397888.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:08.055Z,1516397888.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:08.436Z,1516397888.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:08.450Z,1516397888.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:08.835Z,1516397888.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:08.849Z,1516397888.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:09.241Z,1516397889.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:09.255Z,1516397889.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:09.642Z,1516397889.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:09.656Z,1516397889.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:10.041Z,1516397890.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:10.055Z,1516397890.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:10.436Z,1516397890.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:10.450Z,1516397890.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:10.835Z,1516397890.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:10.851Z,1516397890.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:11.238Z,1516397891.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:11.252Z,1516397891.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:11.637Z,1516397891.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:11.651Z,1516397891.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:12.040Z,1516397892.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:12.059Z,1516397892.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:12.436Z,1516397892.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:12.450Z,1516397892.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:12.829Z,1516397892.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:12.843Z,1516397892.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:13.240Z,1516397893.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:13.263Z,1516397893.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:13.642Z,1516397893.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:13.656Z,1516397893.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:14.041Z,1516397894.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:14.055Z,1516397894.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:14.436Z,1516397894.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:14.451Z,1516397894.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:14.828Z,1516397894.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:14.842Z,1516397894.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:15.237Z,1516397895.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:15.252Z,1516397895.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:15.641Z,1516397895.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:15.663Z,1516397895.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:16.042Z,1516397896.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:16.055Z,1516397896.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:16.432Z,1516397896.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:16.450Z,1516397896.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:16.830Z,1516397896.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:16.849Z,1516397896.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:17.239Z,1516397897.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:17.253Z,1516397897.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:17.639Z,1516397897.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:17.662Z,1516397897.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:18.042Z,1516397898.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:18.056Z,1516397898.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:18.438Z,1516397898.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:18.452Z,1516397898.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:18.829Z,1516397898.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:18.848Z,1516397898.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:19.247Z,1516397899.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:19.261Z,1516397899.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:19.650Z,1516397899.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:19.664Z,1516397899.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:20.047Z,1516397900.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:20.062Z,1516397900.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:20.436Z,1516397900.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:20.451Z,1516397900.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:20.820Z,1516397900.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:20.847Z,1516397900.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:21.238Z,1516397901.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:21.260Z,1516397901.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:21.649Z,1516397901.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:21.667Z,1516397901.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:22.047Z,1516397902.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:22.061Z,1516397902.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:22.438Z,1516397902.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:22.453Z,1516397902.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:22.834Z,1516397902.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:22.852Z,1516397902.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:23.239Z,1516397903.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:23.254Z,1516397903.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:23.637Z,1516397903.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:23.651Z,1516397903.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:24.039Z,1516397904.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:24.060Z,1516397904.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:24.420Z,1516397904.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:24.447Z,1516397904.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:24.836Z,1516397904.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:24.852Z,1516397904.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:25.242Z,1516397905.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:25.257Z,1516397905.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:25.649Z,1516397905.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:25.664Z,1516397905.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:26.045Z,1516397906.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:26.060Z,1516397906.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:26.436Z,1516397906.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:26.451Z,1516397906.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:26.819Z,1516397906.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:26.851Z,1516397906.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:27.238Z,1516397907.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:27.265Z,1516397907.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:27.650Z,1516397907.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:27.671Z,1516397907.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:28.044Z,1516397908.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:28.069Z,1516397908.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:28.439Z,1516397908.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:28.453Z,1516397908.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:28.824Z,1516397908.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:28.849Z,1516397908.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:29.234Z,1516397909.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:29.258Z,1516397909.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:29.643Z,1516397909.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:29.658Z,1516397909.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:30.042Z,1516397910.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:30.063Z,1516397910.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:30.424Z,1516397910.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:30.456Z,1516397910.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:30.827Z,1516397910.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:30.859Z,1516397910.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:31.243Z,1516397911.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:31.258Z,1516397911.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:31.647Z,1516397911.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:31.661Z,1516397911.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:32.047Z,1516397912.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:32.061Z,1516397912.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:32.424Z,1516397912.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:32.450Z,1516397912.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:32.819Z,1516397912.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:32.851Z,1516397912.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:33.242Z,1516397913.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:33.256Z,1516397913.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:33.656Z,1516397913.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:33.679Z,1516397913.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:34.045Z,1516397914.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:34.059Z,1516397914.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:34.463Z,1516397914.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:34.478Z,1516397914.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:34.827Z,1516397914.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:34.852Z,1516397914.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:35.242Z,1516397915.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:35.311Z,1516397915.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:35.632Z,1516397915.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:35.666Z,1516397915.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:35.669Z,1516397915.669 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T21:33:35.5Z
2018-01-19T21:38:35.669Z,1516397915.669 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T21:38:35.669Z,1516397915.669 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T21:38:36.052Z,1516397916.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:36.075Z,1516397916.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:36.684Z,1516397916.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:36.730Z,1516397916.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:36.958Z,1516397916.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:36.993Z,1516397916.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:43.375Z,1516397923.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:43.437Z,1516397923.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:43.537Z,1516397923.537 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0012.lzma
2018-01-19T21:38:43.584Z,1516397923.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:43.650Z,1516397923.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:43.983Z,1516397923.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:44.015Z,1516397924.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:44.311Z,1516397924.311 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0012.lzma.bak
2018-01-19T21:38:44.311Z,1516397924.311 [DataOverHttps](INFO): SBD MOMSN=7724151
2018-01-19T21:38:44.387Z,1516397924.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:44.419Z,1516397924.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:44.838Z,1516397924.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:44.860Z,1516397924.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:45.142Z,1516397925.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:45.168Z,1516397925.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:48.367Z,1516397928.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:48.382Z,1516397928.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:48.494Z,1516397928.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:48.535Z,1516397928.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:48.852Z,1516397928.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:48.866Z,1516397928.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:49.239Z,1516397929.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:49.262Z,1516397929.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:49.631Z,1516397929.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:49.661Z,1516397929.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:50.044Z,1516397930.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:50.086Z,1516397930.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:53.182Z,1516397933.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:53.217Z,1516397933.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:53.300Z,1516397933.300 [DataOverHttps](INFO): Sending 227 bytes from file Logs/20180119T210901/Express0013.lzma
2018-01-19T21:38:53.335Z,1516397933.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:53.379Z,1516397933.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:53.674Z,1516397933.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:53.688Z,1516397933.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:54.043Z,1516397934.043 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0013.lzma.bak
2018-01-19T21:38:54.043Z,1516397934.043 [DataOverHttps](INFO): SBD MOMSN=7724153
2018-01-19T21:38:54.086Z,1516397934.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:54.116Z,1516397934.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:54.567Z,1516397934.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:54.581Z,1516397934.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:54.584Z,1516397934.584 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T21:38:54.584Z,1516397934.584 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T21:38:54.584Z,1516397934.584 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T21:38:54.871Z,1516397934.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:54.886Z,1516397934.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:57.971Z,1516397937.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:58.017Z,1516397938.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:58.112Z,1516397938.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:58.146Z,1516397938.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:58.486Z,1516397938.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:58.516Z,1516397938.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:58.872Z,1516397938.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:58.886Z,1516397938.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:59.272Z,1516397939.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:59.291Z,1516397939.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:38:59.672Z,1516397939.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:38:59.687Z,1516397939.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:00.069Z,1516397940.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:00.084Z,1516397940.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:00.474Z,1516397940.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:00.489Z,1516397940.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:00.878Z,1516397940.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:00.916Z,1516397940.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:01.275Z,1516397941.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:01.291Z,1516397941.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:01.669Z,1516397941.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:01.688Z,1516397941.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:02.075Z,1516397942.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:02.095Z,1516397942.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:02.477Z,1516397942.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:02.499Z,1516397942.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:02.874Z,1516397942.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:02.888Z,1516397942.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:03.278Z,1516397943.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:03.292Z,1516397943.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:03.680Z,1516397943.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:03.694Z,1516397943.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:04.082Z,1516397944.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:04.096Z,1516397944.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:04.482Z,1516397944.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:04.503Z,1516397944.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:04.878Z,1516397944.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:04.892Z,1516397944.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:05.269Z,1516397945.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:05.288Z,1516397945.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:05.670Z,1516397945.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:05.690Z,1516397945.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:06.059Z,1516397946.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:06.096Z,1516397946.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:06.475Z,1516397946.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:06.498Z,1516397946.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:06.889Z,1516397946.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:06.911Z,1516397946.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:07.288Z,1516397947.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:07.301Z,1516397947.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:07.661Z,1516397947.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:07.691Z,1516397947.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:08.067Z,1516397948.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:08.093Z,1516397948.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:08.459Z,1516397948.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:08.491Z,1516397948.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:08.860Z,1516397948.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:08.894Z,1516397948.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:08.908Z,1516397948.908 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T21:39:09.263Z,1516397949.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:09.288Z,1516397949.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:09.678Z,1516397949.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:09.697Z,1516397949.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:10.080Z,1516397950.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:10.098Z,1516397950.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:10.482Z,1516397950.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:10.496Z,1516397950.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:10.863Z,1516397950.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:10.898Z,1516397950.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:11.261Z,1516397951.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:11.299Z,1516397951.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:11.665Z,1516397951.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:11.695Z,1516397951.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:12.060Z,1516397952.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:12.096Z,1516397952.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:12.478Z,1516397952.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:12.500Z,1516397952.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:12.882Z,1516397952.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:12.909Z,1516397952.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:13.271Z,1516397953.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:13.297Z,1516397953.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:13.659Z,1516397953.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:13.692Z,1516397953.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:14.067Z,1516397954.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:14.098Z,1516397954.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:14.459Z,1516397954.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:14.504Z,1516397954.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:14.868Z,1516397954.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:14.902Z,1516397954.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:15.265Z,1516397955.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:15.279Z,1516397955.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:15.678Z,1516397955.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:15.705Z,1516397955.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:16.082Z,1516397956.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:16.108Z,1516397956.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:16.482Z,1516397956.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:16.508Z,1516397956.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:16.871Z,1516397956.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:16.908Z,1516397956.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:17.258Z,1516397957.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:17.272Z,1516397957.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:17.672Z,1516397957.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:17.706Z,1516397957.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:17.706Z,1516397957.706 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-01-19T21:39:17.706Z,1516397957.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:39:17.708Z,1516397957.708 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:17.708Z,1516397957.708 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-01-19T21:39:17.708Z,1516397957.708 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:39:17.714Z,1516397957.714 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:17.714Z,1516397957.714 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-01-19T21:39:17.715Z,1516397957.715 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:39:17.744Z,1516397957.744 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:39:17.757Z,1516397957.757 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:39:17.757Z,1516397957.757 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:39:18.071Z,1516397958.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:18.095Z,1516397958.095 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:39:18.095Z,1516397958.095 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-01-19T21:39:18.095Z,1516397958.095 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:39:18.095Z,1516397958.095 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-01-19T21:39:18.096Z,1516397958.096 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:39:18.096Z,1516397958.096 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-01-19T21:39:18.477Z,1516397958.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:18.491Z,1516397958.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:39:18.491Z,1516397958.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:39:18.491Z,1516397958.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:39:18.492Z,1516397958.492 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:39:18.492Z,1516397958.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:39:18.492Z,1516397958.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:39:18.493Z,1516397958.493 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:39:18.494Z,1516397958.494 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:39:18.494Z,1516397958.494 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:39:18.890Z,1516397958.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:18.926Z,1516397958.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:39:18.927Z,1516397958.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:19.276Z,1516397959.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:19.301Z,1516397959.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:39:19.302Z,1516397959.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:19.669Z,1516397959.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:19.686Z,1516397959.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T21:39:19.687Z,1516397959.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:20.066Z,1516397960.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:20.088Z,1516397960.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T21:39:20.089Z,1516397960.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:20.459Z,1516397960.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:20.498Z,1516397960.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T21:39:20.499Z,1516397960.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:20.860Z,1516397960.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:20.890Z,1516397960.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T21:39:20.891Z,1516397960.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:21.275Z,1516397961.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:21.289Z,1516397961.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T21:39:21.290Z,1516397961.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:21.678Z,1516397961.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:21.692Z,1516397961.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T21:39:21.693Z,1516397961.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:22.082Z,1516397962.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:22.095Z,1516397962.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T21:39:22.096Z,1516397962.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:22.485Z,1516397962.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:22.503Z,1516397962.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:39:22.503Z,1516397962.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:22.867Z,1516397962.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:22.881Z,1516397962.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:39:22.881Z,1516397962.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:23.261Z,1516397963.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:23.275Z,1516397963.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:39:23.276Z,1516397963.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:23.665Z,1516397963.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:23.679Z,1516397963.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:39:23.680Z,1516397963.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:24.068Z,1516397964.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:24.120Z,1516397964.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:39:24.121Z,1516397964.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:24.470Z,1516397964.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:24.484Z,1516397964.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T21:39:24.485Z,1516397964.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:24.914Z,1516397964.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:24.962Z,1516397964.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-01-19T21:39:24.963Z,1516397964.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:25.278Z,1516397965.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:25.291Z,1516397965.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T21:39:25.292Z,1516397965.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:25.657Z,1516397965.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:25.671Z,1516397965.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T21:39:25.672Z,1516397965.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:26.067Z,1516397966.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:26.086Z,1516397966.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T21:39:26.087Z,1516397966.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:26.467Z,1516397966.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:26.481Z,1516397966.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T21:39:26.482Z,1516397966.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:26.865Z,1516397966.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:26.887Z,1516397966.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T21:39:26.887Z,1516397966.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:27.264Z,1516397967.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:27.303Z,1516397967.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T21:39:27.304Z,1516397967.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:27.684Z,1516397967.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:27.697Z,1516397967.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T21:39:27.698Z,1516397967.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:28.090Z,1516397968.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:28.104Z,1516397968.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T21:39:28.105Z,1516397968.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:28.478Z,1516397968.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:28.492Z,1516397968.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:39:28.493Z,1516397968.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:28.867Z,1516397968.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:28.881Z,1516397968.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:39:28.882Z,1516397968.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:29.260Z,1516397969.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:29.282Z,1516397969.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:39:29.283Z,1516397969.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:29.681Z,1516397969.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:29.695Z,1516397969.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:39:29.696Z,1516397969.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:30.075Z,1516397970.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:30.089Z,1516397970.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:39:30.090Z,1516397970.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:30.476Z,1516397970.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:30.494Z,1516397970.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T21:39:30.495Z,1516397970.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:30.882Z,1516397970.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:30.896Z,1516397970.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:39:30.897Z,1516397970.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:31.278Z,1516397971.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:31.298Z,1516397971.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:39:31.299Z,1516397971.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:31.661Z,1516397971.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:31.681Z,1516397971.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:39:31.682Z,1516397971.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:32.067Z,1516397972.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:32.094Z,1516397972.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T21:39:32.095Z,1516397972.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:32.476Z,1516397972.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:32.490Z,1516397972.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T21:39:32.490Z,1516397972.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:32.876Z,1516397972.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:32.890Z,1516397972.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T21:39:32.891Z,1516397972.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:33.280Z,1516397973.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:33.294Z,1516397973.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T21:39:33.295Z,1516397973.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:33.679Z,1516397973.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:33.692Z,1516397973.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T21:39:33.693Z,1516397973.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:34.082Z,1516397974.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:34.096Z,1516397974.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T21:39:34.097Z,1516397974.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:34.481Z,1516397974.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:34.495Z,1516397974.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T21:39:34.496Z,1516397974.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:34.876Z,1516397974.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:34.890Z,1516397974.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T21:39:34.891Z,1516397974.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:35.268Z,1516397975.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:35.286Z,1516397975.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T21:39:35.287Z,1516397975.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:35.670Z,1516397975.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:35.688Z,1516397975.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T21:39:35.690Z,1516397975.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:36.076Z,1516397976.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:36.089Z,1516397976.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T21:39:36.090Z,1516397976.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:36.478Z,1516397976.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:36.496Z,1516397976.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T21:39:36.501Z,1516397976.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:36.885Z,1516397976.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:36.906Z,1516397976.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:39:36.907Z,1516397976.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:37.286Z,1516397977.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:37.299Z,1516397977.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T21:39:37.300Z,1516397977.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:37.670Z,1516397977.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:37.687Z,1516397977.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T21:39:37.688Z,1516397977.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:38.067Z,1516397978.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:38.089Z,1516397978.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:38.459Z,1516397978.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:38.492Z,1516397978.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:38.877Z,1516397978.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:38.891Z,1516397978.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:39.266Z,1516397979.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:39.289Z,1516397979.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:39.686Z,1516397979.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:39.700Z,1516397979.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:40.084Z,1516397980.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:40.099Z,1516397980.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:40.486Z,1516397980.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:40.507Z,1516397980.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:40.876Z,1516397980.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:40.890Z,1516397980.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:41.269Z,1516397981.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:41.287Z,1516397981.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:41.666Z,1516397981.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:41.698Z,1516397981.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:42.076Z,1516397982.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:42.090Z,1516397982.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:42.482Z,1516397982.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:42.497Z,1516397982.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:42.885Z,1516397982.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:42.907Z,1516397982.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:43.287Z,1516397983.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:43.300Z,1516397983.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:43.663Z,1516397983.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:43.699Z,1516397983.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:44.075Z,1516397984.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:44.090Z,1516397984.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:44.463Z,1516397984.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:44.495Z,1516397984.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:44.878Z,1516397984.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:44.892Z,1516397984.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:45.264Z,1516397985.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:45.299Z,1516397985.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:45.688Z,1516397985.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:45.702Z,1516397985.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:46.091Z,1516397986.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:46.105Z,1516397986.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:46.482Z,1516397986.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:46.503Z,1516397986.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:46.865Z,1516397986.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:46.900Z,1516397986.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:47.260Z,1516397987.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:47.295Z,1516397987.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:47.664Z,1516397987.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:47.694Z,1516397987.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:48.067Z,1516397988.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:48.100Z,1516397988.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:48.470Z,1516397988.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:48.504Z,1516397988.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:48.894Z,1516397988.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:48.916Z,1516397988.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:49.288Z,1516397989.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:49.302Z,1516397989.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:49.662Z,1516397989.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:49.676Z,1516397989.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:50.067Z,1516397990.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:50.093Z,1516397990.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:50.468Z,1516397990.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:50.482Z,1516397990.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:50.873Z,1516397990.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:50.887Z,1516397990.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:51.272Z,1516397991.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:51.286Z,1516397991.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:51.690Z,1516397991.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:51.803Z,1516397991.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:52.083Z,1516397992.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:52.119Z,1516397992.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:52.479Z,1516397992.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:52.493Z,1516397992.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:52.872Z,1516397992.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:52.887Z,1516397992.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:53.262Z,1516397993.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:53.285Z,1516397993.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:53.673Z,1516397993.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:53.688Z,1516397993.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:54.072Z,1516397994.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:54.087Z,1516397994.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:54.476Z,1516397994.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:54.495Z,1516397994.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:54.882Z,1516397994.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:54.897Z,1516397994.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:55.289Z,1516397995.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:55.303Z,1516397995.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:58.376Z,1516397998.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:58.395Z,1516397998.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:58.490Z,1516397998.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:58.505Z,1516397998.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:58.884Z,1516397998.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:58.903Z,1516397998.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:59.290Z,1516397999.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:59.304Z,1516397999.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:39:59.687Z,1516397999.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:39:59.706Z,1516397999.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:00.080Z,1516398000.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:00.094Z,1516398000.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:00.476Z,1516398000.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:00.490Z,1516398000.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:00.883Z,1516398000.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:00.903Z,1516398000.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:01.283Z,1516398001.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:01.297Z,1516398001.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:01.686Z,1516398001.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:01.700Z,1516398001.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:02.086Z,1516398002.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:02.100Z,1516398002.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:02.484Z,1516398002.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:02.498Z,1516398002.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:02.884Z,1516398002.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:02.898Z,1516398002.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:03.277Z,1516398003.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:03.291Z,1516398003.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:03.678Z,1516398003.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:03.691Z,1516398003.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:04.079Z,1516398004.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:04.094Z,1516398004.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:04.487Z,1516398004.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:04.502Z,1516398004.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:04.890Z,1516398004.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:04.904Z,1516398004.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:05.281Z,1516398005.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:05.299Z,1516398005.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:05.679Z,1516398005.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:05.699Z,1516398005.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:06.081Z,1516398006.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:06.102Z,1516398006.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:06.473Z,1516398006.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:06.496Z,1516398006.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:06.882Z,1516398006.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:06.896Z,1516398006.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:07.272Z,1516398007.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:07.307Z,1516398007.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:07.683Z,1516398007.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:07.702Z,1516398007.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:08.091Z,1516398008.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:08.111Z,1516398008.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:08.489Z,1516398008.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:08.511Z,1516398008.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:08.880Z,1516398008.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:08.894Z,1516398008.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:09.270Z,1516398009.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:09.302Z,1516398009.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:09.675Z,1516398009.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:09.710Z,1516398009.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:10.105Z,1516398010.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:10.120Z,1516398010.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:10.490Z,1516398010.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:10.504Z,1516398010.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:10.893Z,1516398010.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:10.907Z,1516398010.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:11.288Z,1516398011.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:11.303Z,1516398011.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:11.669Z,1516398011.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:11.702Z,1516398011.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:12.070Z,1516398012.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:12.096Z,1516398012.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:12.465Z,1516398012.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:12.506Z,1516398012.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:12.873Z,1516398012.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:12.901Z,1516398012.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:13.270Z,1516398013.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:13.296Z,1516398013.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:13.675Z,1516398013.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:13.701Z,1516398013.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:14.089Z,1516398014.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:14.111Z,1516398014.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:14.493Z,1516398014.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:14.507Z,1516398014.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:14.870Z,1516398014.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:14.902Z,1516398014.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:15.275Z,1516398015.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:15.300Z,1516398015.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:15.669Z,1516398015.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:15.705Z,1516398015.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:16.067Z,1516398016.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:16.101Z,1516398016.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:16.484Z,1516398016.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:16.510Z,1516398016.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:16.883Z,1516398016.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:16.918Z,1516398016.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:17.282Z,1516398017.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:17.312Z,1516398017.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:17.667Z,1516398017.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:17.714Z,1516398017.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:18.066Z,1516398018.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:18.084Z,1516398018.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:18.474Z,1516398018.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:18.488Z,1516398018.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:18.876Z,1516398018.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:18.922Z,1516398018.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:19.275Z,1516398019.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:19.317Z,1516398019.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:19.688Z,1516398019.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:19.712Z,1516398019.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:20.090Z,1516398020.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:20.115Z,1516398020.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:20.486Z,1516398020.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:20.512Z,1516398020.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:20.875Z,1516398020.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:20.914Z,1516398020.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:21.275Z,1516398021.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:21.284Z,1516398021.284 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2018-01-19T21:40:21.315Z,1516398021.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:21.678Z,1516398021.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:21.709Z,1516398021.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:22.072Z,1516398022.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:22.122Z,1516398022.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:22.487Z,1516398022.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:22.515Z,1516398022.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:22.885Z,1516398022.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:22.907Z,1516398022.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:23.287Z,1516398023.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:23.318Z,1516398023.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:23.678Z,1516398023.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:23.720Z,1516398023.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:24.071Z,1516398024.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:24.086Z,1516398024.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:24.477Z,1516398024.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:24.495Z,1516398024.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:24.879Z,1516398024.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:24.899Z,1516398024.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:25.276Z,1516398025.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:25.321Z,1516398025.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:25.692Z,1516398025.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:25.725Z,1516398025.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:26.083Z,1516398026.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:26.100Z,1516398026.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:26.484Z,1516398026.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:26.499Z,1516398026.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:26.880Z,1516398026.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:26.920Z,1516398026.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:27.275Z,1516398027.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:27.290Z,1516398027.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:27.672Z,1516398027.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:27.689Z,1516398027.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:28.079Z,1516398028.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:28.118Z,1516398028.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:28.481Z,1516398028.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:28.522Z,1516398028.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:28.881Z,1516398028.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:28.902Z,1516398028.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:29.282Z,1516398029.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:29.300Z,1516398029.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:29.681Z,1516398029.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:29.697Z,1516398029.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:30.076Z,1516398030.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:30.099Z,1516398030.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:30.473Z,1516398030.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:30.488Z,1516398030.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:30.874Z,1516398030.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:30.898Z,1516398030.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:31.281Z,1516398031.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:31.297Z,1516398031.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:31.683Z,1516398031.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:31.725Z,1516398031.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:32.083Z,1516398032.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:32.097Z,1516398032.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:32.481Z,1516398032.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:32.499Z,1516398032.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:32.880Z,1516398032.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:32.898Z,1516398032.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:33.279Z,1516398033.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:33.294Z,1516398033.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:33.671Z,1516398033.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:33.686Z,1516398033.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:34.079Z,1516398034.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:34.097Z,1516398034.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:34.480Z,1516398034.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:34.499Z,1516398034.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:34.882Z,1516398034.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:34.896Z,1516398034.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:35.282Z,1516398035.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:35.296Z,1516398035.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:35.679Z,1516398035.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:35.693Z,1516398035.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:36.078Z,1516398036.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:36.096Z,1516398036.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:36.474Z,1516398036.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:36.488Z,1516398036.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:36.871Z,1516398036.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:36.898Z,1516398036.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:37.279Z,1516398037.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:37.293Z,1516398037.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:37.685Z,1516398037.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:37.703Z,1516398037.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:38.084Z,1516398038.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:38.103Z,1516398038.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:38.484Z,1516398038.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:38.498Z,1516398038.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:38.871Z,1516398038.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:38.885Z,1516398038.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:39.275Z,1516398039.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:39.289Z,1516398039.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:39.671Z,1516398039.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:39.690Z,1516398039.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:40.072Z,1516398040.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:40.112Z,1516398040.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:40.489Z,1516398040.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:40.504Z,1516398040.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:40.888Z,1516398040.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:40.906Z,1516398040.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:41.290Z,1516398041.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:41.303Z,1516398041.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:41.679Z,1516398041.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:41.699Z,1516398041.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:42.079Z,1516398042.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:42.093Z,1516398042.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:42.480Z,1516398042.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:42.494Z,1516398042.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:42.874Z,1516398042.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:42.901Z,1516398042.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:43.263Z,1516398043.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:43.289Z,1516398043.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:43.687Z,1516398043.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:43.702Z,1516398043.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:44.089Z,1516398044.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:44.112Z,1516398044.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:44.490Z,1516398044.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:44.504Z,1516398044.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:44.881Z,1516398044.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:44.895Z,1516398044.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:45.267Z,1516398045.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:45.298Z,1516398045.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:45.678Z,1516398045.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:45.692Z,1516398045.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:46.081Z,1516398046.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:46.095Z,1516398046.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:46.486Z,1516398046.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:46.500Z,1516398046.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:46.890Z,1516398046.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:46.903Z,1516398046.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:47.299Z,1516398047.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:47.317Z,1516398047.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:47.667Z,1516398047.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:47.702Z,1516398047.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:48.063Z,1516398048.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:48.105Z,1516398048.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:48.471Z,1516398048.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:48.503Z,1516398048.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:48.868Z,1516398048.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:48.898Z,1516398048.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:49.263Z,1516398049.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:49.277Z,1516398049.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:49.693Z,1516398049.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:49.708Z,1516398049.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:50.095Z,1516398050.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:50.115Z,1516398050.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:50.491Z,1516398050.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:50.504Z,1516398050.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:50.869Z,1516398050.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:50.883Z,1516398050.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:51.269Z,1516398051.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:51.283Z,1516398051.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:51.676Z,1516398051.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:51.690Z,1516398051.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:52.069Z,1516398052.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:52.083Z,1516398052.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:52.490Z,1516398052.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:52.514Z,1516398052.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:52.886Z,1516398052.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:52.919Z,1516398052.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:53.305Z,1516398053.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:53.320Z,1516398053.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:53.673Z,1516398053.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:53.688Z,1516398053.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:54.076Z,1516398054.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:54.090Z,1516398054.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:54.491Z,1516398054.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:54.520Z,1516398054.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:54.890Z,1516398054.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:54.920Z,1516398054.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:55.290Z,1516398055.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:55.324Z,1516398055.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:58.372Z,1516398058.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:58.387Z,1516398058.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:58.481Z,1516398058.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:58.528Z,1516398058.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:58.878Z,1516398058.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:58.892Z,1516398058.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:59.273Z,1516398059.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:59.310Z,1516398059.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:40:59.682Z,1516398059.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:40:59.696Z,1516398059.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:00.056Z,1516398060.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:00.087Z,1516398060.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:00.454Z,1516398060.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:00.476Z,1516398060.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:00.861Z,1516398060.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:00.890Z,1516398060.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:01.251Z,1516398061.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:01.267Z,1516398061.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:01.662Z,1516398061.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:01.693Z,1516398061.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:02.083Z,1516398062.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:02.097Z,1516398062.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:02.466Z,1516398062.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:02.500Z,1516398062.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:02.859Z,1516398062.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:02.890Z,1516398062.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:03.263Z,1516398063.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:03.299Z,1516398063.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:03.664Z,1516398063.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:03.704Z,1516398063.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:04.059Z,1516398064.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:04.074Z,1516398064.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:04.474Z,1516398064.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:04.497Z,1516398064.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:04.874Z,1516398064.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:04.896Z,1516398064.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:05.266Z,1516398065.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:05.280Z,1516398065.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:05.661Z,1516398065.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:05.675Z,1516398065.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:06.060Z,1516398066.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:06.074Z,1516398066.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:06.461Z,1516398066.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:06.475Z,1516398066.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:06.878Z,1516398066.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:06.901Z,1516398066.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:07.273Z,1516398067.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:07.307Z,1516398067.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:07.658Z,1516398067.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:07.672Z,1516398067.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:08.061Z,1516398068.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:08.075Z,1516398068.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:08.474Z,1516398068.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:08.506Z,1516398068.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:08.871Z,1516398068.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:08.901Z,1516398068.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:09.275Z,1516398069.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:09.305Z,1516398069.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:09.664Z,1516398069.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:09.679Z,1516398069.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:10.064Z,1516398070.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:10.079Z,1516398070.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:10.466Z,1516398070.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:10.482Z,1516398070.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:10.879Z,1516398070.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:10.892Z,1516398070.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:11.265Z,1516398071.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:11.279Z,1516398071.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:11.662Z,1516398071.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:11.677Z,1516398071.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:12.064Z,1516398072.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:12.078Z,1516398072.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:12.466Z,1516398072.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:12.480Z,1516398072.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:12.870Z,1516398072.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:12.884Z,1516398072.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:13.278Z,1516398073.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:13.292Z,1516398073.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:13.660Z,1516398073.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:13.674Z,1516398073.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:14.060Z,1516398074.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:14.083Z,1516398074.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:14.466Z,1516398074.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:14.480Z,1516398074.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:14.870Z,1516398074.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:14.884Z,1516398074.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:15.270Z,1516398075.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:15.284Z,1516398075.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:15.668Z,1516398075.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:15.682Z,1516398075.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:16.067Z,1516398076.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:16.082Z,1516398076.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:16.463Z,1516398076.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:16.483Z,1516398076.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:16.866Z,1516398076.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:16.880Z,1516398076.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:17.261Z,1516398077.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:17.276Z,1516398077.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:17.638Z,1516398077.638 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T21:41:17.638Z,1516398077.638 [NAL9602] Data Fault, FailCount= 3
2018-01-19T21:41:17.638Z,1516398077.638 [NAL9602](ERROR): Data Fault
2018-01-19T21:41:17.659Z,1516398077.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:17.707Z,1516398077.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:17.720Z,1516398077.720 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T21:41:18.038Z,1516398078.038 [NAL9602](INFO): Powering down
2018-01-19T21:41:18.066Z,1516398078.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:18.088Z,1516398078.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:18.460Z,1516398078.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:18.474Z,1516398078.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:18.857Z,1516398078.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:18.888Z,1516398078.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:18.917Z,1516398078.917 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T21:41:18.917Z,1516398078.917 [NAL9602] No Fault, FailCount= 3
2018-01-19T21:41:19.263Z,1516398079.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:19.276Z,1516398079.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:19.660Z,1516398079.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:19.674Z,1516398079.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:20.057Z,1516398080.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:20.088Z,1516398080.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:20.467Z,1516398080.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:20.480Z,1516398080.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:20.867Z,1516398080.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:20.881Z,1516398080.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:21.263Z,1516398081.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:21.277Z,1516398081.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:21.663Z,1516398081.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:21.676Z,1516398081.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:22.067Z,1516398082.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:22.081Z,1516398082.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:22.463Z,1516398082.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:22.477Z,1516398082.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:22.858Z,1516398082.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:22.878Z,1516398082.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:23.260Z,1516398083.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:23.274Z,1516398083.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:23.657Z,1516398083.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:23.688Z,1516398083.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:24.058Z,1516398084.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:24.072Z,1516398084.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:24.458Z,1516398084.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:24.473Z,1516398084.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:24.858Z,1516398084.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:24.879Z,1516398084.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:25.258Z,1516398085.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:25.272Z,1516398085.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:25.660Z,1516398085.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:25.674Z,1516398085.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:26.063Z,1516398086.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:26.077Z,1516398086.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:26.458Z,1516398086.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:26.478Z,1516398086.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:26.867Z,1516398086.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:26.881Z,1516398086.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:27.272Z,1516398087.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:27.291Z,1516398087.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:27.667Z,1516398087.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:27.681Z,1516398087.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:28.067Z,1516398088.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:28.081Z,1516398088.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:28.462Z,1516398088.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:28.476Z,1516398088.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:28.859Z,1516398088.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:28.878Z,1516398088.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:29.260Z,1516398089.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:29.275Z,1516398089.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:29.671Z,1516398089.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:29.685Z,1516398089.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:30.059Z,1516398090.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:30.078Z,1516398090.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:30.461Z,1516398090.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:30.475Z,1516398090.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:30.864Z,1516398090.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:30.878Z,1516398090.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:31.255Z,1516398091.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:31.285Z,1516398091.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:31.661Z,1516398091.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:31.675Z,1516398091.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:32.063Z,1516398092.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:32.077Z,1516398092.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:32.458Z,1516398092.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:32.473Z,1516398092.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:32.858Z,1516398092.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:32.874Z,1516398092.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:33.258Z,1516398093.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:33.280Z,1516398093.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:33.663Z,1516398093.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:33.677Z,1516398093.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:34.067Z,1516398094.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:34.082Z,1516398094.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:34.463Z,1516398094.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:34.477Z,1516398094.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:34.863Z,1516398094.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:34.877Z,1516398094.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:35.261Z,1516398095.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:35.275Z,1516398095.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:35.663Z,1516398095.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:35.677Z,1516398095.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:36.060Z,1516398096.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:36.078Z,1516398096.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:36.461Z,1516398096.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:36.475Z,1516398096.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:36.857Z,1516398096.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:36.888Z,1516398096.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:37.267Z,1516398097.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:37.281Z,1516398097.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:37.662Z,1516398097.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:37.676Z,1516398097.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:38.059Z,1516398098.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:38.080Z,1516398098.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:38.464Z,1516398098.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:38.478Z,1516398098.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:38.865Z,1516398098.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:38.879Z,1516398098.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:39.264Z,1516398099.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:39.278Z,1516398099.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:39.655Z,1516398099.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:39.679Z,1516398099.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:40.069Z,1516398100.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:40.083Z,1516398100.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:40.466Z,1516398100.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:40.481Z,1516398100.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:40.858Z,1516398100.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:40.873Z,1516398100.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:41.260Z,1516398101.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:41.276Z,1516398101.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:41.662Z,1516398101.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:41.677Z,1516398101.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:42.059Z,1516398102.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:42.079Z,1516398102.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:42.460Z,1516398102.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:42.474Z,1516398102.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:42.861Z,1516398102.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:42.875Z,1516398102.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:43.258Z,1516398103.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:43.278Z,1516398103.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:43.660Z,1516398103.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:43.675Z,1516398103.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:44.063Z,1516398104.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:44.082Z,1516398104.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:44.467Z,1516398104.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:44.481Z,1516398104.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:44.867Z,1516398104.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:44.881Z,1516398104.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:45.263Z,1516398105.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:45.277Z,1516398105.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:45.667Z,1516398105.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:45.681Z,1516398105.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:46.067Z,1516398106.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:46.081Z,1516398106.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:46.464Z,1516398106.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:46.478Z,1516398106.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:46.868Z,1516398106.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:46.881Z,1516398106.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:47.261Z,1516398107.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:47.276Z,1516398107.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:47.664Z,1516398107.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:47.678Z,1516398107.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:48.064Z,1516398108.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:48.078Z,1516398108.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:48.435Z,1516398108.435 [NAL9602](INFO): Powering up NAL9602
2018-01-19T21:41:48.462Z,1516398108.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:48.484Z,1516398108.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:48.868Z,1516398108.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:48.882Z,1516398108.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:49.267Z,1516398109.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:49.281Z,1516398109.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:49.648Z,1516398109.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:49.683Z,1516398109.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:50.066Z,1516398110.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:50.081Z,1516398110.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:50.466Z,1516398110.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:50.481Z,1516398110.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:50.866Z,1516398110.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:50.882Z,1516398110.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:51.255Z,1516398111.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:51.279Z,1516398111.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:51.651Z,1516398111.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:51.682Z,1516398111.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:52.066Z,1516398112.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:52.081Z,1516398112.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:52.455Z,1516398112.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:52.479Z,1516398112.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:52.866Z,1516398112.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:52.880Z,1516398112.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:53.248Z,1516398113.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:53.282Z,1516398113.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:53.651Z,1516398113.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:53.679Z,1516398113.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:54.067Z,1516398114.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:54.080Z,1516398114.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:54.452Z,1516398114.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:54.482Z,1516398114.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:54.855Z,1516398114.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:54.879Z,1516398114.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:55.267Z,1516398115.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:55.281Z,1516398115.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:55.655Z,1516398115.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:55.685Z,1516398115.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:58.750Z,1516398118.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:58.781Z,1516398118.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:58.873Z,1516398118.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:58.907Z,1516398118.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:59.214Z,1516398119.214 [NAL9602](INFO): NAL9602 initialized
2018-01-19T21:41:59.232Z,1516398119.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:59.270Z,1516398119.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:41:59.635Z,1516398119.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:41:59.649Z,1516398119.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:00.050Z,1516398120.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:00.080Z,1516398120.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:00.442Z,1516398120.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:00.456Z,1516398120.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:00.849Z,1516398120.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:00.863Z,1516398120.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:01.237Z,1516398121.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:01.251Z,1516398121.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:01.636Z,1516398121.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:01.655Z,1516398121.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:02.037Z,1516398122.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:02.051Z,1516398122.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:02.435Z,1516398122.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:02.453Z,1516398122.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:02.841Z,1516398122.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:02.855Z,1516398122.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:03.241Z,1516398123.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:03.254Z,1516398123.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:03.642Z,1516398123.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:03.657Z,1516398123.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:04.040Z,1516398124.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:04.054Z,1516398124.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:04.432Z,1516398124.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:04.446Z,1516398124.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:04.841Z,1516398124.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:04.855Z,1516398124.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:05.242Z,1516398125.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:05.257Z,1516398125.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:05.642Z,1516398125.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:05.656Z,1516398125.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:06.046Z,1516398126.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:06.061Z,1516398126.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:06.434Z,1516398126.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:06.453Z,1516398126.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:06.839Z,1516398126.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:06.853Z,1516398126.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:07.241Z,1516398127.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:07.255Z,1516398127.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:07.638Z,1516398127.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:07.659Z,1516398127.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:08.043Z,1516398128.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:08.057Z,1516398128.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:08.447Z,1516398128.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:08.461Z,1516398128.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:08.843Z,1516398128.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:08.857Z,1516398128.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:09.232Z,1516398129.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:09.246Z,1516398129.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:09.635Z,1516398129.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:09.654Z,1516398129.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:10.034Z,1516398130.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:10.052Z,1516398130.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:10.439Z,1516398130.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:10.453Z,1516398130.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:10.839Z,1516398130.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:10.859Z,1516398130.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:11.242Z,1516398131.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:11.257Z,1516398131.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:11.642Z,1516398131.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:11.656Z,1516398131.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:12.042Z,1516398132.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:12.063Z,1516398132.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:12.439Z,1516398132.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:12.454Z,1516398132.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:12.833Z,1516398132.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:12.847Z,1516398132.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:13.234Z,1516398133.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:13.248Z,1516398133.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:13.640Z,1516398133.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:13.654Z,1516398133.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:14.043Z,1516398134.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:14.057Z,1516398134.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:14.442Z,1516398134.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:14.456Z,1516398134.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:14.841Z,1516398134.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:14.855Z,1516398134.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:15.239Z,1516398135.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:15.254Z,1516398135.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:15.628Z,1516398135.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:15.648Z,1516398135.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:16.035Z,1516398136.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:16.050Z,1516398136.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:16.431Z,1516398136.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:16.450Z,1516398136.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:16.840Z,1516398136.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:16.855Z,1516398136.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:17.241Z,1516398137.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:17.255Z,1516398137.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:17.642Z,1516398137.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:17.656Z,1516398137.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:18.042Z,1516398138.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:18.056Z,1516398138.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:18.434Z,1516398138.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:18.449Z,1516398138.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:18.829Z,1516398138.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:18.855Z,1516398138.855 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:18.855Z,1516398138.855 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-01-19T21:42:18.855Z,1516398138.855 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:42:18.857Z,1516398138.857 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:18.857Z,1516398138.857 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-01-19T21:42:18.857Z,1516398138.857 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:42:18.859Z,1516398138.859 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:18.859Z,1516398138.859 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-01-19T21:42:18.859Z,1516398138.859 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:42:18.885Z,1516398138.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:42:18.886Z,1516398138.886 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:42:18.886Z,1516398138.886 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:42:19.237Z,1516398139.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:19.261Z,1516398139.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:42:19.261Z,1516398139.261 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-01-19T21:42:19.262Z,1516398139.262 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:42:19.262Z,1516398139.262 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-01-19T21:42:19.262Z,1516398139.262 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:42:19.263Z,1516398139.263 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-01-19T21:42:19.627Z,1516398139.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:19.658Z,1516398139.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:42:19.658Z,1516398139.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:42:19.659Z,1516398139.659 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:42:19.659Z,1516398139.659 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:42:19.659Z,1516398139.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:42:19.660Z,1516398139.660 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:42:19.660Z,1516398139.660 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:42:19.660Z,1516398139.660 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:42:19.665Z,1516398139.665 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:42:20.038Z,1516398140.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:20.063Z,1516398140.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:42:20.064Z,1516398140.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:20.438Z,1516398140.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:20.464Z,1516398140.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:42:20.467Z,1516398140.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:20.842Z,1516398140.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:20.867Z,1516398140.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T21:42:20.868Z,1516398140.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:21.228Z,1516398141.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:21.270Z,1516398141.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T21:42:21.271Z,1516398141.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:21.622Z,1516398141.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:21.636Z,1516398141.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T21:42:21.637Z,1516398141.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:22.036Z,1516398142.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:22.066Z,1516398142.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T21:42:22.067Z,1516398142.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:22.429Z,1516398142.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:22.443Z,1516398142.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T21:42:22.444Z,1516398142.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:22.836Z,1516398142.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:22.850Z,1516398142.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T21:42:22.851Z,1516398142.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:23.247Z,1516398143.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:23.276Z,1516398143.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T21:42:23.277Z,1516398143.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:23.647Z,1516398143.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:23.677Z,1516398143.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:42:23.678Z,1516398143.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:24.043Z,1516398144.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:24.073Z,1516398144.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:42:24.074Z,1516398144.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:24.436Z,1516398144.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:24.451Z,1516398144.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:42:24.452Z,1516398144.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:24.832Z,1516398144.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:24.847Z,1516398144.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:42:24.848Z,1516398144.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:25.237Z,1516398145.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:25.252Z,1516398145.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:42:25.253Z,1516398145.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:25.634Z,1516398145.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:25.648Z,1516398145.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T21:42:25.649Z,1516398145.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:26.034Z,1516398146.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:26.048Z,1516398146.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T21:42:26.049Z,1516398146.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:26.434Z,1516398146.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:26.448Z,1516398146.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T21:42:26.449Z,1516398146.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:26.842Z,1516398146.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:26.856Z,1516398146.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T21:42:26.857Z,1516398146.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:27.232Z,1516398147.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:27.245Z,1516398147.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T21:42:27.246Z,1516398147.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:27.621Z,1516398147.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:27.635Z,1516398147.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T21:42:27.636Z,1516398147.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:28.029Z,1516398148.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:28.043Z,1516398148.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T21:42:28.044Z,1516398148.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:28.432Z,1516398148.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:28.445Z,1516398148.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T21:42:28.446Z,1516398148.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:28.824Z,1516398148.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:28.850Z,1516398148.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T21:42:28.851Z,1516398148.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:29.238Z,1516398149.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:29.264Z,1516398149.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T21:42:29.269Z,1516398149.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:29.646Z,1516398149.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:29.669Z,1516398149.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:42:29.670Z,1516398149.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:30.046Z,1516398150.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:30.069Z,1516398150.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:42:30.070Z,1516398150.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:30.431Z,1516398150.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:30.450Z,1516398150.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:42:30.451Z,1516398150.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:30.835Z,1516398150.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:30.849Z,1516398150.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:42:30.850Z,1516398150.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:31.236Z,1516398151.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:31.250Z,1516398151.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:42:31.251Z,1516398151.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:31.634Z,1516398151.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:31.648Z,1516398151.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T21:42:31.649Z,1516398151.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:32.034Z,1516398152.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:32.048Z,1516398152.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:42:32.049Z,1516398152.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:32.438Z,1516398152.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:32.452Z,1516398152.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:42:32.453Z,1516398152.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:32.850Z,1516398152.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:32.879Z,1516398152.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:42:32.880Z,1516398152.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:33.234Z,1516398153.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:33.247Z,1516398153.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T21:42:33.248Z,1516398153.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:33.629Z,1516398153.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:33.643Z,1516398153.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T21:42:33.644Z,1516398153.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:34.037Z,1516398154.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:34.051Z,1516398154.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T21:42:34.052Z,1516398154.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:34.437Z,1516398154.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:34.450Z,1516398154.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T21:42:34.451Z,1516398154.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:34.833Z,1516398154.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:34.847Z,1516398154.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T21:42:34.848Z,1516398154.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:35.250Z,1516398155.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:35.280Z,1516398155.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T21:42:35.281Z,1516398155.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:35.646Z,1516398155.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:35.660Z,1516398155.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T21:42:35.673Z,1516398155.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:36.038Z,1516398156.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:36.058Z,1516398156.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T21:42:36.059Z,1516398156.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:36.436Z,1516398156.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:36.450Z,1516398156.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T21:42:36.451Z,1516398156.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:36.835Z,1516398156.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:36.848Z,1516398156.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T21:42:36.849Z,1516398156.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:37.237Z,1516398157.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:37.251Z,1516398157.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T21:42:37.252Z,1516398157.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:37.630Z,1516398157.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:37.658Z,1516398157.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T21:42:37.659Z,1516398157.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:38.042Z,1516398158.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:38.056Z,1516398158.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:42:38.057Z,1516398158.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:38.442Z,1516398158.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:38.455Z,1516398158.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T21:42:38.456Z,1516398158.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:38.840Z,1516398158.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:38.859Z,1516398158.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:39.239Z,1516398159.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:39.253Z,1516398159.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:39.634Z,1516398159.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:39.648Z,1516398159.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:40.034Z,1516398160.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:40.049Z,1516398160.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:40.431Z,1516398160.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:40.445Z,1516398160.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:40.832Z,1516398160.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:40.846Z,1516398160.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:41.240Z,1516398161.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:41.259Z,1516398161.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:41.646Z,1516398161.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:41.660Z,1516398161.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:42.042Z,1516398162.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:42.056Z,1516398162.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:42.436Z,1516398162.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:42.450Z,1516398162.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:42.831Z,1516398162.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:42.845Z,1516398162.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:43.237Z,1516398163.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:43.252Z,1516398163.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:43.639Z,1516398163.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:43.653Z,1516398163.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:44.041Z,1516398164.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:44.055Z,1516398164.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:44.442Z,1516398164.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:44.456Z,1516398164.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:44.854Z,1516398164.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:44.868Z,1516398164.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:45.236Z,1516398165.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:45.254Z,1516398165.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:45.631Z,1516398165.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:45.645Z,1516398165.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:46.032Z,1516398166.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:46.058Z,1516398166.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:46.440Z,1516398166.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:46.453Z,1516398166.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:46.835Z,1516398166.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:46.850Z,1516398166.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:47.242Z,1516398167.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:47.256Z,1516398167.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:47.642Z,1516398167.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:47.656Z,1516398167.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:48.043Z,1516398168.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:48.058Z,1516398168.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:48.436Z,1516398168.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:48.452Z,1516398168.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:48.841Z,1516398168.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:48.855Z,1516398168.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:49.242Z,1516398169.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:49.256Z,1516398169.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:49.636Z,1516398169.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:49.651Z,1516398169.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:50.042Z,1516398170.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:50.056Z,1516398170.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:50.441Z,1516398170.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:50.456Z,1516398170.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:50.841Z,1516398170.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:50.855Z,1516398170.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:51.235Z,1516398171.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:51.254Z,1516398171.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:51.634Z,1516398171.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:51.649Z,1516398171.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:52.032Z,1516398172.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:52.061Z,1516398172.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:52.436Z,1516398172.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:52.450Z,1516398172.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:52.839Z,1516398172.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:52.854Z,1516398172.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:53.240Z,1516398173.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:53.259Z,1516398173.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:53.642Z,1516398173.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:53.663Z,1516398173.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:54.041Z,1516398174.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:54.056Z,1516398174.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:54.439Z,1516398174.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:54.459Z,1516398174.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:54.838Z,1516398174.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:54.852Z,1516398174.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:55.240Z,1516398175.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:55.254Z,1516398175.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:55.635Z,1516398175.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:55.655Z,1516398175.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:56.042Z,1516398176.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:56.056Z,1516398176.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:59.135Z,1516398179.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:59.153Z,1516398179.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:59.276Z,1516398179.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:59.290Z,1516398179.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:42:59.608Z,1516398179.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:42:59.639Z,1516398179.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:00.008Z,1516398180.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:00.047Z,1516398180.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:00.398Z,1516398180.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:00.413Z,1516398180.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:00.812Z,1516398180.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:00.844Z,1516398180.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:01.219Z,1516398181.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:01.244Z,1516398181.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:01.606Z,1516398181.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:01.643Z,1516398181.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:02.019Z,1516398182.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:02.042Z,1516398182.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:02.411Z,1516398182.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:02.449Z,1516398182.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:02.799Z,1516398182.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:02.817Z,1516398182.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:03.205Z,1516398183.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:03.219Z,1516398183.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:03.607Z,1516398183.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:03.621Z,1516398183.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:04.018Z,1516398184.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:04.051Z,1516398184.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:04.426Z,1516398184.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:04.451Z,1516398184.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:04.818Z,1516398184.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:04.852Z,1516398184.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:05.199Z,1516398185.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:05.217Z,1516398185.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:05.607Z,1516398185.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:05.627Z,1516398185.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:06.008Z,1516398186.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:06.022Z,1516398186.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:06.405Z,1516398186.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:06.419Z,1516398186.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:06.808Z,1516398186.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:06.823Z,1516398186.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:07.214Z,1516398187.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:07.228Z,1516398187.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:07.610Z,1516398187.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:07.624Z,1516398187.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:08.022Z,1516398188.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:08.052Z,1516398188.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:08.407Z,1516398188.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:08.420Z,1516398188.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:08.803Z,1516398188.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:08.820Z,1516398188.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:09.204Z,1516398189.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:09.226Z,1516398189.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:09.608Z,1516398189.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:09.622Z,1516398189.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:10.018Z,1516398190.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:10.032Z,1516398190.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:10.422Z,1516398190.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:10.436Z,1516398190.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:10.814Z,1516398190.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:10.828Z,1516398190.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:11.205Z,1516398191.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:11.219Z,1516398191.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:11.603Z,1516398191.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:11.626Z,1516398191.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:12.015Z,1516398192.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:12.029Z,1516398192.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:12.412Z,1516398192.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:12.426Z,1516398192.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:12.811Z,1516398192.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:12.831Z,1516398192.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:13.217Z,1516398193.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:13.231Z,1516398193.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:13.613Z,1516398193.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:13.627Z,1516398193.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:14.016Z,1516398194.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:14.035Z,1516398194.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:14.412Z,1516398194.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:14.426Z,1516398194.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:14.805Z,1516398194.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:14.819Z,1516398194.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:15.203Z,1516398195.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:15.225Z,1516398195.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:15.612Z,1516398195.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:15.626Z,1516398195.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:16.016Z,1516398196.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:16.031Z,1516398196.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:16.416Z,1516398196.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:16.435Z,1516398196.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:16.817Z,1516398196.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:16.831Z,1516398196.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:17.193Z,1516398197.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:17.227Z,1516398197.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:17.610Z,1516398197.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:17.628Z,1516398197.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:17.999Z,1516398197.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:18.025Z,1516398198.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:18.412Z,1516398198.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:18.426Z,1516398198.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:18.798Z,1516398198.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:18.830Z,1516398198.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:19.223Z,1516398199.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:19.237Z,1516398199.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:19.618Z,1516398199.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:19.632Z,1516398199.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:20.022Z,1516398200.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:20.036Z,1516398200.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:20.412Z,1516398200.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:20.443Z,1516398200.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:20.801Z,1516398200.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:20.836Z,1516398200.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:21.202Z,1516398201.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:21.236Z,1516398201.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:21.620Z,1516398201.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:21.686Z,1516398201.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:22.030Z,1516398202.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:22.071Z,1516398202.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:22.448Z,1516398202.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:22.471Z,1516398202.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:22.826Z,1516398202.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:22.878Z,1516398202.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:23.211Z,1516398203.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:23.297Z,1516398203.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:23.608Z,1516398203.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:23.639Z,1516398203.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:24.013Z,1516398204.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:24.063Z,1516398204.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:24.413Z,1516398204.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:24.444Z,1516398204.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:24.803Z,1516398204.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:24.852Z,1516398204.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:25.234Z,1516398205.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:25.264Z,1516398205.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:25.621Z,1516398205.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:25.686Z,1516398205.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:26.012Z,1516398206.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:26.046Z,1516398206.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:26.413Z,1516398206.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:26.452Z,1516398206.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:26.806Z,1516398206.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:26.841Z,1516398206.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:27.224Z,1516398207.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:27.283Z,1516398207.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:27.601Z,1516398207.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:27.640Z,1516398207.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:28.016Z,1516398208.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:28.036Z,1516398208.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:28.427Z,1516398208.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:28.443Z,1516398208.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:28.822Z,1516398208.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:28.836Z,1516398208.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:29.200Z,1516398209.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:29.225Z,1516398209.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:29.601Z,1516398209.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:29.634Z,1516398209.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:30.023Z,1516398210.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:30.037Z,1516398210.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:30.410Z,1516398210.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:30.431Z,1516398210.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:30.822Z,1516398210.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:30.836Z,1516398210.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:31.198Z,1516398211.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:31.227Z,1516398211.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:31.595Z,1516398211.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:31.618Z,1516398211.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:32.021Z,1516398212.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:32.035Z,1516398212.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:32.423Z,1516398212.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:32.437Z,1516398212.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:32.808Z,1516398212.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:32.838Z,1516398212.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:33.205Z,1516398213.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:33.230Z,1516398213.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:33.599Z,1516398213.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:33.625Z,1516398213.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:34.010Z,1516398214.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:34.035Z,1516398214.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:34.418Z,1516398214.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:34.440Z,1516398214.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:34.806Z,1516398214.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:34.838Z,1516398214.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:35.204Z,1516398215.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:35.234Z,1516398215.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:35.603Z,1516398215.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:35.634Z,1516398215.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:36.023Z,1516398216.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:36.037Z,1516398216.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:36.410Z,1516398216.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:36.443Z,1516398216.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:36.822Z,1516398216.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:36.836Z,1516398216.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:37.201Z,1516398217.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:37.238Z,1516398217.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:37.594Z,1516398217.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:37.638Z,1516398217.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:38.011Z,1516398218.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:38.026Z,1516398218.026 [PNI_TCM](ERROR): CRC does not match. Expected:0x27981 got:0x5563
2018-01-19T21:43:38.047Z,1516398218.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:38.427Z,1516398218.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:38.441Z,1516398218.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:38.811Z,1516398218.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:38.843Z,1516398218.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:39.208Z,1516398219.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:39.233Z,1516398219.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:39.602Z,1516398219.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:39.636Z,1516398219.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:40.028Z,1516398220.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:40.042Z,1516398220.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:40.431Z,1516398220.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:40.451Z,1516398220.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:40.826Z,1516398220.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:40.840Z,1516398220.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:41.198Z,1516398221.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:41.225Z,1516398221.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:41.605Z,1516398221.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:41.636Z,1516398221.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:42.014Z,1516398222.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:42.043Z,1516398222.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:42.407Z,1516398222.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:42.439Z,1516398222.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:42.819Z,1516398222.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:42.847Z,1516398222.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:43.202Z,1516398223.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:43.222Z,1516398223.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:43.596Z,1516398223.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:43.610Z,1516398223.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:44.050Z,1516398224.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:44.065Z,1516398224.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:44.416Z,1516398224.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:44.434Z,1516398224.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:44.808Z,1516398224.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:44.830Z,1516398224.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:45.203Z,1516398225.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:45.218Z,1516398225.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:45.601Z,1516398225.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:45.634Z,1516398225.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:46.016Z,1516398226.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:46.023Z,1516398226.023 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2018-01-19T21:43:46.051Z,1516398226.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:46.414Z,1516398226.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:46.435Z,1516398226.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:46.818Z,1516398226.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:46.832Z,1516398226.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:47.194Z,1516398227.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:47.227Z,1516398227.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:47.600Z,1516398227.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:47.625Z,1516398227.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:48.013Z,1516398228.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:48.027Z,1516398228.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:48.410Z,1516398228.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:48.424Z,1516398228.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:48.815Z,1516398228.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:48.832Z,1516398228.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:49.203Z,1516398229.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:49.246Z,1516398229.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:49.606Z,1516398229.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:49.620Z,1516398229.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:50.010Z,1516398230.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:50.025Z,1516398230.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:50.425Z,1516398230.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:50.452Z,1516398230.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:50.812Z,1516398230.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:50.828Z,1516398230.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:51.211Z,1516398231.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:51.231Z,1516398231.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:51.612Z,1516398231.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:51.627Z,1516398231.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:52.024Z,1516398232.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:52.049Z,1516398232.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:52.416Z,1516398232.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:52.431Z,1516398232.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:52.823Z,1516398232.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:52.852Z,1516398232.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:53.205Z,1516398233.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:53.227Z,1516398233.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:53.611Z,1516398233.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:53.655Z,1516398233.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:54.008Z,1516398234.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:54.026Z,1516398234.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:54.415Z,1516398234.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:54.429Z,1516398234.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:54.834Z,1516398234.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:54.856Z,1516398234.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:55.213Z,1516398235.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:55.254Z,1516398235.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:55.256Z,1516398235.256 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T21:43:55.256Z,1516398235.256 [Default:CheckIn:C.Wait] Stopped
2018-01-19T21:43:55.257Z,1516398235.257 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T21:43:55.257Z,1516398235.257 [Default:CheckIn:D] Running Loop=1
2018-01-19T21:43:55.607Z,1516398235.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:55.625Z,1516398235.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:55.628Z,1516398235.628 [Default:CheckIn:D] Stopped
2018-01-19T21:43:55.629Z,1516398235.629 [Default:CheckIn:E] Running Loop=1
2018-01-19T21:43:56.014Z,1516398236.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:56.028Z,1516398236.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:56.031Z,1516398236.031 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.126715 min 
2018-01-19T21:43:56.032Z,1516398236.032 [Default:CheckIn:E] Stopped
2018-01-19T21:43:56.032Z,1516398236.032 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T21:43:56.032Z,1516398236.032 [Default:CheckIn] Stopped
2018-01-19T21:43:56.032Z,1516398236.032 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T21:43:56.032Z,1516398236.032 [Default:CheckIn](INFO): Running loop #4
2018-01-19T21:43:56.032Z,1516398236.032 [Default:CheckIn] Running Loop=4
2018-01-19T21:43:56.032Z,1516398236.032 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T21:43:56.032Z,1516398236.032 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T21:43:56.406Z,1516398236.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:56.438Z,1516398236.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:59.489Z,1516398239.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:59.515Z,1516398239.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:59.623Z,1516398239.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:43:59.643Z,1516398239.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:43:59.987Z,1516398239.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:00.011Z,1516398240.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:00.383Z,1516398240.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:00.409Z,1516398240.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:00.761Z,1516398240.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:00.784Z,1516398240.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:01.168Z,1516398241.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:01.195Z,1516398241.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:01.577Z,1516398241.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:01.591Z,1516398241.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:01.974Z,1516398241.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:01.989Z,1516398241.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:02.380Z,1516398242.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:02.395Z,1516398242.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:02.781Z,1516398242.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:02.799Z,1516398242.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:03.177Z,1516398243.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:03.191Z,1516398243.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:03.571Z,1516398243.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:03.591Z,1516398243.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:03.976Z,1516398243.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:03.990Z,1516398243.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:04.366Z,1516398244.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:04.386Z,1516398244.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:04.770Z,1516398244.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:04.785Z,1516398244.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:05.178Z,1516398245.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:05.192Z,1516398245.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:05.581Z,1516398245.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:05.595Z,1516398245.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:05.994Z,1516398245.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:06.008Z,1516398246.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:06.360Z,1516398246.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:06.386Z,1516398246.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:06.757Z,1516398246.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:06.791Z,1516398246.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:07.166Z,1516398247.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:07.184Z,1516398247.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:07.568Z,1516398247.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:07.582Z,1516398247.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:07.975Z,1516398247.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:07.995Z,1516398247.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:08.376Z,1516398248.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:08.395Z,1516398248.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:08.782Z,1516398248.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:08.796Z,1516398248.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:09.176Z,1516398249.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:09.191Z,1516398249.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:09.575Z,1516398249.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:09.590Z,1516398249.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:09.969Z,1516398249.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:09.982Z,1516398249.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:10.366Z,1516398250.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:10.385Z,1516398250.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:10.767Z,1516398250.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:10.782Z,1516398250.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:11.178Z,1516398251.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:11.192Z,1516398251.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:11.577Z,1516398251.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:11.591Z,1516398251.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:11.981Z,1516398251.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:11.995Z,1516398251.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:12.373Z,1516398252.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:12.387Z,1516398252.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:12.761Z,1516398252.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:12.787Z,1516398252.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:13.172Z,1516398253.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:13.191Z,1516398253.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:13.573Z,1516398253.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:13.615Z,1516398253.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:13.962Z,1516398253.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:13.987Z,1516398253.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:14.383Z,1516398254.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:14.403Z,1516398254.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:14.787Z,1516398254.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:14.801Z,1516398254.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:15.178Z,1516398255.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:15.199Z,1516398255.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:15.563Z,1516398255.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:15.589Z,1516398255.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:15.964Z,1516398255.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:15.991Z,1516398255.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:16.368Z,1516398256.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:16.394Z,1516398256.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:16.763Z,1516398256.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:16.788Z,1516398256.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:17.181Z,1516398257.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:17.204Z,1516398257.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:17.581Z,1516398257.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:17.595Z,1516398257.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:17.982Z,1516398257.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:17.996Z,1516398257.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:18.364Z,1516398258.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:18.391Z,1516398258.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:18.757Z,1516398258.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:18.783Z,1516398258.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:19.163Z,1516398259.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:19.194Z,1516398259.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:19.564Z,1516398259.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:19.599Z,1516398259.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:19.967Z,1516398259.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:19.993Z,1516398259.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:20.382Z,1516398260.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:20.396Z,1516398260.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:20.784Z,1516398260.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:20.814Z,1516398260.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:21.178Z,1516398261.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:21.207Z,1516398261.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:21.571Z,1516398261.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:21.600Z,1516398261.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:21.972Z,1516398261.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:22.001Z,1516398262.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:22.365Z,1516398262.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:22.379Z,1516398262.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:22.767Z,1516398262.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:22.782Z,1516398262.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:23.182Z,1516398263.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:23.207Z,1516398263.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:23.578Z,1516398263.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:23.608Z,1516398263.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:23.982Z,1516398263.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:24.003Z,1516398264.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:24.369Z,1516398264.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:24.383Z,1516398264.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:24.764Z,1516398264.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:24.779Z,1516398264.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:25.165Z,1516398265.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:25.179Z,1516398265.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:25.570Z,1516398265.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:25.584Z,1516398265.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:25.965Z,1516398265.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:25.987Z,1516398265.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:26.386Z,1516398266.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:26.422Z,1516398266.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:26.782Z,1516398266.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:26.805Z,1516398266.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:27.170Z,1516398267.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:27.185Z,1516398267.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:27.568Z,1516398267.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:27.587Z,1516398267.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:27.969Z,1516398267.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:27.995Z,1516398267.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:28.373Z,1516398268.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:28.387Z,1516398268.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:28.772Z,1516398268.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:28.791Z,1516398268.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:29.186Z,1516398269.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:29.200Z,1516398269.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:29.582Z,1516398269.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:29.596Z,1516398269.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:29.976Z,1516398269.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:29.995Z,1516398269.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:30.376Z,1516398270.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:30.391Z,1516398270.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:30.767Z,1516398270.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:30.781Z,1516398270.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:31.171Z,1516398271.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:31.191Z,1516398271.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:31.576Z,1516398271.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:31.595Z,1516398271.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:31.976Z,1516398271.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:31.990Z,1516398271.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:32.378Z,1516398272.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:32.392Z,1516398272.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:32.778Z,1516398272.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:32.793Z,1516398272.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:33.178Z,1516398273.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:33.192Z,1516398273.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:33.575Z,1516398273.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:33.590Z,1516398273.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:33.973Z,1516398273.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:33.987Z,1516398273.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:34.376Z,1516398274.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:34.390Z,1516398274.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:34.773Z,1516398274.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:34.787Z,1516398274.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:35.182Z,1516398275.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:35.197Z,1516398275.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:35.582Z,1516398275.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:35.596Z,1516398275.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:35.979Z,1516398275.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:35.993Z,1516398275.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:36.367Z,1516398276.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:36.388Z,1516398276.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:36.764Z,1516398276.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:36.786Z,1516398276.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:37.174Z,1516398277.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:37.188Z,1516398277.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:37.570Z,1516398277.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:37.585Z,1516398277.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:37.967Z,1516398277.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:37.990Z,1516398277.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:38.382Z,1516398278.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:38.397Z,1516398278.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:38.781Z,1516398278.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:38.796Z,1516398278.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:39.182Z,1516398279.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:39.196Z,1516398279.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:39.575Z,1516398279.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:39.591Z,1516398279.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:39.976Z,1516398279.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:39.991Z,1516398279.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:40.376Z,1516398280.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:40.391Z,1516398280.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:40.775Z,1516398280.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:40.791Z,1516398280.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:41.181Z,1516398281.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:41.196Z,1516398281.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:41.581Z,1516398281.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:41.595Z,1516398281.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:41.981Z,1516398281.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:41.995Z,1516398281.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:42.368Z,1516398282.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:42.382Z,1516398282.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:42.762Z,1516398282.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:42.784Z,1516398282.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:43.167Z,1516398283.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:43.188Z,1516398283.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:43.569Z,1516398283.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:43.586Z,1516398283.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:43.981Z,1516398283.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:44.015Z,1516398284.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:44.381Z,1516398284.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:44.396Z,1516398284.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:44.785Z,1516398284.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:44.799Z,1516398284.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:45.174Z,1516398285.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:45.195Z,1516398285.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:45.566Z,1516398285.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:45.589Z,1516398285.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:45.959Z,1516398285.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:45.994Z,1516398285.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:46.376Z,1516398286.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:46.391Z,1516398286.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:46.766Z,1516398286.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:46.788Z,1516398286.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:47.179Z,1516398287.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:47.193Z,1516398287.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:47.584Z,1516398287.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:47.603Z,1516398287.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:47.984Z,1516398287.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:48.003Z,1516398288.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:48.376Z,1516398288.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:48.390Z,1516398288.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:48.776Z,1516398288.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:48.790Z,1516398288.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:49.166Z,1516398289.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:49.188Z,1516398289.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:49.573Z,1516398289.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:49.587Z,1516398289.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:49.960Z,1516398289.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:49.987Z,1516398289.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:50.386Z,1516398290.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:50.400Z,1516398290.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:50.782Z,1516398290.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:50.796Z,1516398290.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:51.174Z,1516398291.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:51.196Z,1516398291.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:51.577Z,1516398291.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:51.591Z,1516398291.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:51.960Z,1516398291.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:51.996Z,1516398291.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:52.377Z,1516398292.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:52.391Z,1516398292.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:52.766Z,1516398292.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:52.790Z,1516398292.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:53.179Z,1516398293.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:53.198Z,1516398293.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:53.584Z,1516398293.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:53.599Z,1516398293.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:53.981Z,1516398293.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:53.996Z,1516398293.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:54.359Z,1516398294.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:54.385Z,1516398294.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:54.776Z,1516398294.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:54.790Z,1516398294.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:55.166Z,1516398295.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:55.188Z,1516398295.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:55.560Z,1516398295.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:55.586Z,1516398295.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:55.976Z,1516398295.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:55.990Z,1516398295.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:56.381Z,1516398296.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:56.395Z,1516398296.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:56.785Z,1516398296.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:56.799Z,1516398296.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:59.875Z,1516398299.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:44:59.895Z,1516398299.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:44:59.987Z,1516398299.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:00.028Z,1516398300.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:00.352Z,1516398300.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:00.382Z,1516398300.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:00.748Z,1516398300.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:00.779Z,1516398300.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:01.150Z,1516398301.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:01.180Z,1516398301.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:01.562Z,1516398301.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:01.583Z,1516398301.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:01.962Z,1516398301.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:01.987Z,1516398301.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:02.352Z,1516398302.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:02.382Z,1516398302.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:02.751Z,1516398302.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:02.787Z,1516398302.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:03.162Z,1516398303.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:03.197Z,1516398303.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:03.566Z,1516398303.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:03.595Z,1516398303.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:03.954Z,1516398303.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:03.969Z,1516398303.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:04.353Z,1516398304.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:04.367Z,1516398304.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:04.753Z,1516398304.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:04.767Z,1516398304.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:05.166Z,1516398305.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:05.196Z,1516398305.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:05.558Z,1516398305.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:05.573Z,1516398305.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:05.966Z,1516398305.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:05.995Z,1516398305.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:06.350Z,1516398306.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:06.365Z,1516398306.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:06.751Z,1516398306.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:06.767Z,1516398306.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:07.151Z,1516398307.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:07.171Z,1516398307.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:07.558Z,1516398307.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:07.572Z,1516398307.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:07.968Z,1516398307.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:07.996Z,1516398307.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:08.346Z,1516398308.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:08.373Z,1516398308.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:08.753Z,1516398308.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:08.767Z,1516398308.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:09.158Z,1516398309.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:09.173Z,1516398309.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:09.562Z,1516398309.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:09.576Z,1516398309.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:09.959Z,1516398309.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:09.973Z,1516398309.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:10.357Z,1516398310.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:10.372Z,1516398310.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:10.756Z,1516398310.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:10.770Z,1516398310.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:11.158Z,1516398311.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:11.172Z,1516398311.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:11.559Z,1516398311.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:11.573Z,1516398311.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:11.957Z,1516398311.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:11.975Z,1516398311.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:12.351Z,1516398312.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:12.374Z,1516398312.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:12.758Z,1516398312.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:12.772Z,1516398312.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:13.162Z,1516398313.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:13.177Z,1516398313.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:13.562Z,1516398313.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:13.576Z,1516398313.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:13.964Z,1516398313.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:13.978Z,1516398313.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:14.344Z,1516398314.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:14.366Z,1516398314.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:14.750Z,1516398314.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:14.774Z,1516398314.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:15.166Z,1516398315.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:15.181Z,1516398315.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:15.561Z,1516398315.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:15.576Z,1516398315.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:15.966Z,1516398315.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:15.980Z,1516398315.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:16.340Z,1516398316.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:16.366Z,1516398316.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:16.739Z,1516398316.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:16.770Z,1516398316.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:17.165Z,1516398317.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:17.179Z,1516398317.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:17.565Z,1516398317.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:17.579Z,1516398317.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:17.965Z,1516398317.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:17.980Z,1516398317.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:18.356Z,1516398318.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:18.370Z,1516398318.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:18.739Z,1516398318.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:18.773Z,1516398318.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:19.165Z,1516398319.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:19.179Z,1516398319.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:19.565Z,1516398319.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:19.579Z,1516398319.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:19.956Z,1516398319.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:19.981Z,1516398319.981 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:19.981Z,1516398319.981 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-01-19T21:45:19.981Z,1516398319.981 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:45:19.983Z,1516398319.983 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:19.983Z,1516398319.983 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-01-19T21:45:19.983Z,1516398319.983 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:45:19.985Z,1516398319.985 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:19.985Z,1516398319.985 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-01-19T21:45:19.985Z,1516398319.985 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:45:20.021Z,1516398320.021 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:45:20.021Z,1516398320.021 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:45:20.021Z,1516398320.021 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:45:20.343Z,1516398320.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:20.379Z,1516398320.379 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:45:20.379Z,1516398320.379 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-01-19T21:45:20.379Z,1516398320.379 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:45:20.379Z,1516398320.379 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-01-19T21:45:20.380Z,1516398320.380 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:45:20.380Z,1516398320.380 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-01-19T21:45:20.764Z,1516398320.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:20.778Z,1516398320.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:45:20.778Z,1516398320.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:45:20.778Z,1516398320.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:45:20.779Z,1516398320.779 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:45:20.779Z,1516398320.779 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:45:20.779Z,1516398320.779 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:45:20.780Z,1516398320.780 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:45:20.780Z,1516398320.780 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:45:20.780Z,1516398320.780 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:45:21.143Z,1516398321.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:21.175Z,1516398321.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:45:21.176Z,1516398321.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:21.566Z,1516398321.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:21.580Z,1516398321.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:45:21.581Z,1516398321.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:21.966Z,1516398321.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:21.980Z,1516398321.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T21:45:21.981Z,1516398321.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:22.350Z,1516398322.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:22.378Z,1516398322.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T21:45:22.379Z,1516398322.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:22.739Z,1516398322.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:22.774Z,1516398322.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T21:45:22.775Z,1516398322.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:23.143Z,1516398323.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:23.174Z,1516398323.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T21:45:23.175Z,1516398323.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:23.540Z,1516398323.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:23.575Z,1516398323.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T21:45:23.576Z,1516398323.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:23.947Z,1516398323.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:23.972Z,1516398323.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T21:45:23.973Z,1516398323.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:24.362Z,1516398324.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:24.376Z,1516398324.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T21:45:24.377Z,1516398324.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:24.763Z,1516398324.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:24.777Z,1516398324.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:45:24.778Z,1516398324.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:25.166Z,1516398325.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:25.180Z,1516398325.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:45:25.181Z,1516398325.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:25.543Z,1516398325.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:25.574Z,1516398325.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:45:25.575Z,1516398325.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:25.943Z,1516398325.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:25.976Z,1516398325.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:45:25.977Z,1516398325.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:26.348Z,1516398326.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:26.373Z,1516398326.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:45:26.374Z,1516398326.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:26.751Z,1516398326.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:26.776Z,1516398326.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T21:45:26.777Z,1516398326.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:27.150Z,1516398327.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:27.184Z,1516398327.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T21:45:27.185Z,1516398327.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:27.562Z,1516398327.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:27.579Z,1516398327.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T21:45:27.580Z,1516398327.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:27.958Z,1516398327.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:27.979Z,1516398327.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T21:45:27.980Z,1516398327.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:28.340Z,1516398328.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:28.375Z,1516398328.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T21:45:28.376Z,1516398328.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:28.749Z,1516398328.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:28.774Z,1516398328.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T21:45:28.775Z,1516398328.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:29.143Z,1516398329.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:29.178Z,1516398329.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T21:45:29.179Z,1516398329.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:29.551Z,1516398329.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:29.584Z,1516398329.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T21:45:29.585Z,1516398329.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:29.971Z,1516398329.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:29.985Z,1516398329.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T21:45:29.986Z,1516398329.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:30.354Z,1516398330.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:30.390Z,1516398330.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T21:45:30.391Z,1516398330.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:30.751Z,1516398330.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:30.782Z,1516398330.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:45:30.783Z,1516398330.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:31.147Z,1516398331.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:31.180Z,1516398331.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:45:31.182Z,1516398331.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:31.552Z,1516398331.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:31.580Z,1516398331.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:45:31.582Z,1516398331.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:31.949Z,1516398331.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:31.982Z,1516398331.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:45:31.983Z,1516398331.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:32.358Z,1516398332.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:32.387Z,1516398332.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:45:32.388Z,1516398332.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:32.772Z,1516398332.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:32.786Z,1516398332.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T21:45:32.787Z,1516398332.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:33.168Z,1516398333.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:33.186Z,1516398333.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:45:33.187Z,1516398333.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:33.551Z,1516398333.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:33.580Z,1516398333.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:45:33.580Z,1516398333.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:33.956Z,1516398333.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:33.978Z,1516398333.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:45:33.979Z,1516398333.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:34.348Z,1516398334.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:34.379Z,1516398334.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T21:45:34.380Z,1516398334.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:34.746Z,1516398334.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:34.760Z,1516398334.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T21:45:34.777Z,1516398334.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:35.147Z,1516398335.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:35.182Z,1516398335.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T21:45:35.183Z,1516398335.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:35.562Z,1516398335.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:35.586Z,1516398335.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T21:45:35.587Z,1516398335.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:35.966Z,1516398335.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:35.994Z,1516398335.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T21:45:35.995Z,1516398335.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:36.362Z,1516398336.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:36.383Z,1516398336.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T21:45:36.384Z,1516398336.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:36.751Z,1516398336.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:36.765Z,1516398336.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T21:45:36.766Z,1516398336.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:37.150Z,1516398337.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:37.186Z,1516398337.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T21:45:37.187Z,1516398337.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:37.549Z,1516398337.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:37.563Z,1516398337.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T21:45:37.564Z,1516398337.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:37.951Z,1516398337.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:37.965Z,1516398337.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T21:45:37.966Z,1516398337.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:38.366Z,1516398338.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:38.387Z,1516398338.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T21:45:38.388Z,1516398338.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:38.762Z,1516398338.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:38.787Z,1516398338.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T21:45:38.788Z,1516398338.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:39.150Z,1516398339.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:39.170Z,1516398339.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:45:39.171Z,1516398339.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:39.552Z,1516398339.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:39.574Z,1516398339.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T21:45:39.575Z,1516398339.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:39.952Z,1516398339.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:39.974Z,1516398339.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T21:45:39.975Z,1516398339.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:40.356Z,1516398340.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:40.370Z,1516398340.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:40.750Z,1516398340.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:40.773Z,1516398340.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:41.155Z,1516398341.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:41.175Z,1516398341.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:41.561Z,1516398341.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:41.576Z,1516398341.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:41.961Z,1516398341.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:41.975Z,1516398341.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:42.361Z,1516398342.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:42.375Z,1516398342.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:42.746Z,1516398342.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:42.766Z,1516398342.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:43.155Z,1516398343.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:43.171Z,1516398343.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:43.550Z,1516398343.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:43.573Z,1516398343.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:43.956Z,1516398343.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:43.970Z,1516398343.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:44.365Z,1516398344.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:44.379Z,1516398344.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:44.765Z,1516398344.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:44.779Z,1516398344.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:45.166Z,1516398345.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:45.180Z,1516398345.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:45.546Z,1516398345.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:45.596Z,1516398345.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:45.946Z,1516398345.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:45.968Z,1516398345.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:46.338Z,1516398346.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:46.372Z,1516398346.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:46.750Z,1516398346.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:46.777Z,1516398346.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:47.147Z,1516398347.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:47.172Z,1516398347.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:47.558Z,1516398347.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:47.578Z,1516398347.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:47.970Z,1516398347.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:47.991Z,1516398347.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:48.362Z,1516398348.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:48.376Z,1516398348.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:48.744Z,1516398348.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:48.776Z,1516398348.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:49.142Z,1516398349.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:49.171Z,1516398349.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:49.548Z,1516398349.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:49.574Z,1516398349.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:49.945Z,1516398349.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:49.981Z,1516398349.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:50.351Z,1516398350.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:50.382Z,1516398350.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:50.775Z,1516398350.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:50.789Z,1516398350.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:51.155Z,1516398351.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:51.183Z,1516398351.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:51.542Z,1516398351.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:51.557Z,1516398351.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:51.952Z,1516398351.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:51.987Z,1516398351.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:52.343Z,1516398352.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:52.358Z,1516398352.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:52.744Z,1516398352.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:52.759Z,1516398352.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:53.148Z,1516398353.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:53.163Z,1516398353.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:53.553Z,1516398353.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:53.567Z,1516398353.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:53.967Z,1516398353.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:53.991Z,1516398353.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:54.366Z,1516398354.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:54.395Z,1516398354.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:54.748Z,1516398354.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:54.762Z,1516398354.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:55.144Z,1516398355.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:55.163Z,1516398355.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:55.552Z,1516398355.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:55.566Z,1516398355.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:55.952Z,1516398355.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:55.966Z,1516398355.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:56.350Z,1516398356.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:56.364Z,1516398356.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:56.766Z,1516398356.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:56.787Z,1516398356.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:45:57.154Z,1516398357.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:45:57.192Z,1516398357.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:00.244Z,1516398360.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:00.259Z,1516398360.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:00.351Z,1516398360.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:00.394Z,1516398360.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:00.745Z,1516398360.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:00.759Z,1516398360.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:01.150Z,1516398361.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:01.164Z,1516398361.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:01.549Z,1516398361.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:01.563Z,1516398361.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:01.943Z,1516398361.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:01.957Z,1516398361.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:02.322Z,1516398362.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:02.357Z,1516398362.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:02.742Z,1516398362.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:02.756Z,1516398362.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:03.140Z,1516398363.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:03.154Z,1516398363.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:03.550Z,1516398363.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:03.564Z,1516398363.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:03.949Z,1516398363.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:03.963Z,1516398363.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:04.350Z,1516398364.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:04.370Z,1516398364.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:04.721Z,1516398364.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:04.752Z,1516398364.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:05.138Z,1516398365.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:05.153Z,1516398365.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:05.524Z,1516398365.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:05.550Z,1516398365.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:05.939Z,1516398365.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:06.008Z,1516398366.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:06.346Z,1516398366.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:06.361Z,1516398366.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:06.745Z,1516398366.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:06.763Z,1516398366.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:07.141Z,1516398367.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:07.156Z,1516398367.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:07.527Z,1516398367.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:07.558Z,1516398367.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:07.927Z,1516398367.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:07.966Z,1516398367.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:08.325Z,1516398368.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:08.347Z,1516398368.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:08.732Z,1516398368.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:08.762Z,1516398368.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:09.123Z,1516398369.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:09.139Z,1516398369.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:09.534Z,1516398369.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:09.567Z,1516398369.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:09.951Z,1516398369.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:09.965Z,1516398369.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:10.334Z,1516398370.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:10.360Z,1516398370.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:10.725Z,1516398370.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:10.739Z,1516398370.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:11.131Z,1516398371.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:11.166Z,1516398371.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:11.528Z,1516398371.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:11.541Z,1516398371.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:11.931Z,1516398371.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:11.946Z,1516398371.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:12.342Z,1516398372.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:12.356Z,1516398372.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:12.746Z,1516398372.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:12.759Z,1516398372.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:13.134Z,1516398373.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:13.155Z,1516398373.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:13.532Z,1516398373.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:13.551Z,1516398373.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:13.932Z,1516398373.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:13.946Z,1516398373.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:14.332Z,1516398374.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:14.347Z,1516398374.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:14.735Z,1516398374.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:14.750Z,1516398374.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:15.134Z,1516398375.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:15.147Z,1516398375.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:15.534Z,1516398375.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:15.548Z,1516398375.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:15.950Z,1516398375.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:15.979Z,1516398375.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:16.349Z,1516398376.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:16.381Z,1516398376.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:16.730Z,1516398376.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:16.744Z,1516398376.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:17.132Z,1516398377.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:17.151Z,1516398377.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:17.534Z,1516398377.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:17.548Z,1516398377.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:17.931Z,1516398377.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:17.973Z,1516398377.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:18.350Z,1516398378.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:18.364Z,1516398378.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:18.742Z,1516398378.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:18.756Z,1516398378.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:19.142Z,1516398379.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:19.163Z,1516398379.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:19.537Z,1516398379.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:19.551Z,1516398379.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:19.938Z,1516398379.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:19.952Z,1516398379.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:20.333Z,1516398380.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:20.348Z,1516398380.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:20.734Z,1516398380.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:20.752Z,1516398380.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:21.138Z,1516398381.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:21.152Z,1516398381.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:21.541Z,1516398381.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:21.556Z,1516398381.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:21.946Z,1516398381.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:21.960Z,1516398381.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:22.342Z,1516398382.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:22.362Z,1516398382.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:22.730Z,1516398382.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:22.744Z,1516398382.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:23.135Z,1516398383.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:23.150Z,1516398383.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:23.536Z,1516398383.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:23.550Z,1516398383.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:23.942Z,1516398383.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:23.959Z,1516398383.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:24.342Z,1516398384.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:24.356Z,1516398384.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:24.742Z,1516398384.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:24.756Z,1516398384.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:25.143Z,1516398385.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:25.157Z,1516398385.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:25.540Z,1516398385.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:25.554Z,1516398385.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:25.936Z,1516398385.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:25.950Z,1516398385.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:26.332Z,1516398386.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:26.346Z,1516398386.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:26.743Z,1516398386.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:26.757Z,1516398386.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:27.137Z,1516398387.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:27.151Z,1516398387.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:27.543Z,1516398387.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:27.557Z,1516398387.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:27.943Z,1516398387.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:27.957Z,1516398387.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:28.343Z,1516398388.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:28.357Z,1516398388.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:28.730Z,1516398388.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:28.745Z,1516398388.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:29.131Z,1516398389.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:29.155Z,1516398389.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:29.540Z,1516398389.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:29.554Z,1516398389.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:29.936Z,1516398389.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:29.952Z,1516398389.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:30.346Z,1516398390.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:30.361Z,1516398390.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:30.744Z,1516398390.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:30.759Z,1516398390.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:31.145Z,1516398391.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:31.160Z,1516398391.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:31.530Z,1516398391.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:31.552Z,1516398391.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:31.935Z,1516398391.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:31.949Z,1516398391.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:32.333Z,1516398392.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:32.347Z,1516398392.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:32.730Z,1516398392.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:32.756Z,1516398392.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:33.123Z,1516398393.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:33.148Z,1516398393.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:33.543Z,1516398393.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:33.557Z,1516398393.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:33.949Z,1516398393.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:33.964Z,1516398393.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:34.350Z,1516398394.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:34.363Z,1516398394.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:34.725Z,1516398394.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:34.751Z,1516398394.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:35.131Z,1516398395.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:35.156Z,1516398395.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:35.528Z,1516398395.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:35.569Z,1516398395.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:35.931Z,1516398395.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:35.957Z,1516398395.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:36.346Z,1516398396.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:36.360Z,1516398396.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:36.745Z,1516398396.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:36.759Z,1516398396.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:37.146Z,1516398397.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:37.161Z,1516398397.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:37.527Z,1516398397.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:37.558Z,1516398397.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:37.927Z,1516398397.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:37.953Z,1516398397.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:38.321Z,1516398398.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:38.343Z,1516398398.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:38.732Z,1516398398.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:38.757Z,1516398398.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:39.127Z,1516398399.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:39.159Z,1516398399.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:39.548Z,1516398399.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:39.562Z,1516398399.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:39.948Z,1516398399.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:39.967Z,1516398399.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:40.349Z,1516398400.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:40.363Z,1516398400.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:40.726Z,1516398400.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:40.748Z,1516398400.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:41.124Z,1516398401.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:41.138Z,1516398401.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:41.532Z,1516398401.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:41.570Z,1516398401.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:41.926Z,1516398401.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:41.940Z,1516398401.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:42.343Z,1516398402.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:42.368Z,1516398402.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:42.759Z,1516398402.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:42.778Z,1516398402.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:43.147Z,1516398403.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:43.162Z,1516398403.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:43.527Z,1516398403.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:43.559Z,1516398403.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:43.927Z,1516398403.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:43.953Z,1516398403.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:44.325Z,1516398404.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:44.352Z,1516398404.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:44.732Z,1516398404.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:44.758Z,1516398404.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:45.127Z,1516398405.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:45.152Z,1516398405.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:45.546Z,1516398405.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:45.562Z,1516398405.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:45.947Z,1516398405.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:45.978Z,1516398405.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:46.355Z,1516398406.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:46.375Z,1516398406.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:46.728Z,1516398406.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:46.742Z,1516398406.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:47.131Z,1516398407.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:47.167Z,1516398407.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:47.536Z,1516398407.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:47.550Z,1516398407.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:47.935Z,1516398407.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:47.950Z,1516398407.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:48.350Z,1516398408.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:48.373Z,1516398408.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:48.746Z,1516398408.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:48.773Z,1516398408.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:49.134Z,1516398409.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:49.148Z,1516398409.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:49.537Z,1516398409.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:49.596Z,1516398409.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:49.932Z,1516398409.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:49.951Z,1516398409.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:50.334Z,1516398410.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:50.348Z,1516398410.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:50.750Z,1516398410.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:50.772Z,1516398410.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:51.142Z,1516398411.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:51.156Z,1516398411.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:51.537Z,1516398411.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:51.551Z,1516398411.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:51.932Z,1516398411.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:51.951Z,1516398411.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:52.350Z,1516398412.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:52.380Z,1516398412.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:52.734Z,1516398412.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:52.748Z,1516398412.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:53.150Z,1516398413.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:53.180Z,1516398413.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:53.532Z,1516398413.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:53.547Z,1516398413.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:53.936Z,1516398413.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:53.951Z,1516398413.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:54.336Z,1516398414.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:54.350Z,1516398414.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:54.738Z,1516398414.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:54.752Z,1516398414.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:55.136Z,1516398415.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:55.151Z,1516398415.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:55.542Z,1516398415.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:55.556Z,1516398415.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:55.951Z,1516398415.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:55.980Z,1516398415.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:56.338Z,1516398416.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:56.352Z,1516398416.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:56.735Z,1516398416.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:56.751Z,1516398416.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:57.133Z,1516398417.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:57.147Z,1516398417.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:46:57.537Z,1516398417.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:46:57.551Z,1516398417.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:00.627Z,1516398420.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:00.642Z,1516398420.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:00.762Z,1516398420.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:00.787Z,1516398420.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:01.122Z,1516398421.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:01.137Z,1516398421.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:01.521Z,1516398421.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:01.535Z,1516398421.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:01.902Z,1516398421.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:01.933Z,1516398421.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:02.304Z,1516398422.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:02.333Z,1516398422.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:02.694Z,1516398422.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:02.734Z,1516398422.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:03.092Z,1516398423.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:03.112Z,1516398423.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:03.513Z,1516398423.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:03.543Z,1516398423.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:03.915Z,1516398423.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:03.942Z,1516398423.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:04.298Z,1516398424.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:04.335Z,1516398424.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:04.696Z,1516398424.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:04.716Z,1516398424.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:05.101Z,1516398425.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:05.118Z,1516398425.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:05.493Z,1516398425.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:05.512Z,1516398425.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:05.900Z,1516398425.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:05.946Z,1516398425.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:06.295Z,1516398426.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:06.310Z,1516398426.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:06.699Z,1516398426.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:06.716Z,1516398426.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:07.111Z,1516398427.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:07.139Z,1516398427.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:07.498Z,1516398427.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:07.536Z,1516398427.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:07.896Z,1516398427.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:07.912Z,1516398427.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:08.301Z,1516398428.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:08.318Z,1516398428.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:08.703Z,1516398428.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:08.717Z,1516398428.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:09.092Z,1516398429.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:09.139Z,1516398429.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:09.506Z,1516398429.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:09.524Z,1516398429.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:09.916Z,1516398429.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:09.951Z,1516398429.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:10.303Z,1516398430.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:10.317Z,1516398430.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:10.698Z,1516398430.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:10.744Z,1516398430.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:11.096Z,1516398431.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:11.110Z,1516398431.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:11.494Z,1516398431.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:11.520Z,1516398431.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:11.906Z,1516398431.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:11.927Z,1516398431.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:12.296Z,1516398432.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:12.319Z,1516398432.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:12.710Z,1516398432.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:12.728Z,1516398432.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:13.110Z,1516398433.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:13.126Z,1516398433.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:13.509Z,1516398433.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:13.523Z,1516398433.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:13.903Z,1516398433.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:13.952Z,1516398433.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:14.299Z,1516398434.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:14.313Z,1516398434.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:14.701Z,1516398434.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:14.719Z,1516398434.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:15.105Z,1516398435.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:15.121Z,1516398435.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:15.509Z,1516398435.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:15.550Z,1516398435.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:15.910Z,1516398435.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:15.925Z,1516398435.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:16.310Z,1516398436.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:16.328Z,1516398436.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:16.706Z,1516398436.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:16.723Z,1516398436.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:17.105Z,1516398437.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:17.131Z,1516398437.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:17.496Z,1516398437.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:17.510Z,1516398437.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:17.899Z,1516398437.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:17.945Z,1516398437.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:18.296Z,1516398438.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:18.315Z,1516398438.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:18.710Z,1516398438.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:18.724Z,1516398438.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:19.109Z,1516398439.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:19.134Z,1516398439.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:19.514Z,1516398439.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:19.538Z,1516398439.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:19.903Z,1516398439.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:19.922Z,1516398439.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:20.294Z,1516398440.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:20.316Z,1516398440.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:20.688Z,1516398440.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:20.714Z,1516398440.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:21.100Z,1516398441.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:21.119Z,1516398441.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:21.509Z,1516398441.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:21.527Z,1516398441.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:21.913Z,1516398441.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:21.927Z,1516398441.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:22.302Z,1516398442.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:22.331Z,1516398442.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:22.703Z,1516398442.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:22.723Z,1516398442.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:23.087Z,1516398443.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:23.123Z,1516398443.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:23.503Z,1516398443.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:23.519Z,1516398443.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:23.895Z,1516398443.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:23.918Z,1516398443.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:24.287Z,1516398444.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:24.322Z,1516398444.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:24.702Z,1516398444.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:24.735Z,1516398444.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:25.118Z,1516398445.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:25.132Z,1516398445.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:25.514Z,1516398445.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:25.528Z,1516398445.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:25.895Z,1516398445.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:25.920Z,1516398445.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:26.291Z,1516398446.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:26.316Z,1516398446.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:26.688Z,1516398446.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:26.719Z,1516398446.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:27.095Z,1516398447.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:27.120Z,1516398447.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:27.510Z,1516398447.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:27.524Z,1516398447.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:27.918Z,1516398447.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:27.936Z,1516398447.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:28.302Z,1516398448.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:28.323Z,1516398448.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:28.710Z,1516398448.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:28.745Z,1516398448.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:29.120Z,1516398449.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:29.135Z,1516398449.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:29.494Z,1516398449.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:29.509Z,1516398449.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:29.902Z,1516398449.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:29.949Z,1516398449.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:30.314Z,1516398450.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:30.361Z,1516398450.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:30.702Z,1516398450.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:30.717Z,1516398450.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:31.110Z,1516398451.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:31.124Z,1516398451.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:31.501Z,1516398451.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:31.515Z,1516398451.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:31.895Z,1516398451.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:31.910Z,1516398451.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:32.297Z,1516398452.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:32.316Z,1516398452.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:32.705Z,1516398452.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:32.719Z,1516398452.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:33.103Z,1516398453.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:33.123Z,1516398453.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:33.508Z,1516398453.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:33.527Z,1516398453.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:33.910Z,1516398453.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:33.924Z,1516398453.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:34.310Z,1516398454.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:34.324Z,1516398454.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:34.703Z,1516398454.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:34.723Z,1516398454.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:35.087Z,1516398455.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:35.114Z,1516398455.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:35.485Z,1516398455.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:35.519Z,1516398455.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:35.895Z,1516398455.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:35.917Z,1516398455.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:36.287Z,1516398456.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:36.319Z,1516398456.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:36.709Z,1516398456.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:36.724Z,1516398456.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:37.113Z,1516398457.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:37.127Z,1516398457.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:37.504Z,1516398457.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:37.529Z,1516398457.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:37.903Z,1516398457.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:37.923Z,1516398457.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:38.294Z,1516398458.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:38.316Z,1516398458.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:38.688Z,1516398458.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:38.731Z,1516398458.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:39.087Z,1516398459.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:39.124Z,1516398459.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:39.513Z,1516398459.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:39.527Z,1516398459.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:39.914Z,1516398459.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:39.928Z,1516398459.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:40.307Z,1516398460.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:40.331Z,1516398460.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:40.691Z,1516398460.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:40.727Z,1516398460.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:41.088Z,1516398461.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:41.124Z,1516398461.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:41.490Z,1516398461.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:41.523Z,1516398461.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:41.897Z,1516398461.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:41.925Z,1516398461.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:42.288Z,1516398462.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:42.330Z,1516398462.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:42.700Z,1516398462.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:42.730Z,1516398462.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:43.107Z,1516398463.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:43.139Z,1516398463.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:43.517Z,1516398463.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:43.534Z,1516398463.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:43.900Z,1516398463.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:43.930Z,1516398463.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:44.299Z,1516398464.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:44.329Z,1516398464.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:44.697Z,1516398464.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:44.729Z,1516398464.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:45.099Z,1516398465.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:45.131Z,1516398465.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:45.517Z,1516398465.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:45.539Z,1516398465.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:45.916Z,1516398465.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:45.931Z,1516398465.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:46.302Z,1516398466.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:46.323Z,1516398466.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:46.703Z,1516398466.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:46.731Z,1516398466.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:47.096Z,1516398467.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:47.130Z,1516398467.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:47.486Z,1516398467.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:47.508Z,1516398467.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:47.899Z,1516398467.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:47.913Z,1516398467.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:48.295Z,1516398468.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:48.311Z,1516398468.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:48.702Z,1516398468.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:48.739Z,1516398468.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:49.110Z,1516398469.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:49.124Z,1516398469.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:49.514Z,1516398469.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:49.547Z,1516398469.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:49.900Z,1516398469.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:49.915Z,1516398469.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:50.297Z,1516398470.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:50.315Z,1516398470.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:50.701Z,1516398470.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:50.715Z,1516398470.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:51.095Z,1516398471.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:51.110Z,1516398471.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:51.502Z,1516398471.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:51.516Z,1516398471.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:51.914Z,1516398471.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:51.928Z,1516398471.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:52.302Z,1516398472.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:52.326Z,1516398472.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:52.691Z,1516398472.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:52.716Z,1516398472.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:53.087Z,1516398473.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:53.124Z,1516398473.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:53.495Z,1516398473.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:53.527Z,1516398473.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:53.892Z,1516398473.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:53.918Z,1516398473.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:54.292Z,1516398474.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:54.319Z,1516398474.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:54.706Z,1516398474.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:54.735Z,1516398474.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:55.118Z,1516398475.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:55.132Z,1516398475.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:55.499Z,1516398475.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:55.531Z,1516398475.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:55.896Z,1516398475.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:55.921Z,1516398475.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:56.291Z,1516398476.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:56.323Z,1516398476.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:56.688Z,1516398476.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:56.723Z,1516398476.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:57.089Z,1516398477.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:57.104Z,1516398477.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:57.507Z,1516398477.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:57.532Z,1516398477.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:47:57.925Z,1516398477.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:47:57.939Z,1516398477.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:00.998Z,1516398480.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:01.013Z,1516398481.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:01.112Z,1516398481.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:01.144Z,1516398481.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:01.491Z,1516398481.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:01.505Z,1516398481.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:01.897Z,1516398481.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:01.911Z,1516398481.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:02.282Z,1516398482.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:02.302Z,1516398482.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:02.698Z,1516398482.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:02.713Z,1516398482.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:03.098Z,1516398483.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:03.119Z,1516398483.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:03.495Z,1516398483.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:03.521Z,1516398483.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:03.891Z,1516398483.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:03.905Z,1516398483.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:04.288Z,1516398484.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:04.306Z,1516398484.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:04.693Z,1516398484.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:04.716Z,1516398484.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:05.094Z,1516398485.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:05.108Z,1516398485.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:05.526Z,1516398485.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:05.575Z,1516398485.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:05.908Z,1516398485.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:05.931Z,1516398485.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:06.295Z,1516398486.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:06.331Z,1516398486.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:06.683Z,1516398486.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:06.702Z,1516398486.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:07.085Z,1516398487.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:07.099Z,1516398487.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:07.491Z,1516398487.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:07.527Z,1516398487.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:07.893Z,1516398487.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:07.906Z,1516398487.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:08.284Z,1516398488.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:08.299Z,1516398488.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:08.724Z,1516398488.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:08.755Z,1516398488.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:09.098Z,1516398489.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:09.112Z,1516398489.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:09.494Z,1516398489.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:09.508Z,1516398489.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:09.892Z,1516398489.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:09.908Z,1516398489.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:10.292Z,1516398490.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:10.306Z,1516398490.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:10.693Z,1516398490.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:10.707Z,1516398490.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:11.094Z,1516398491.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:11.115Z,1516398491.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:11.510Z,1516398491.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:11.543Z,1516398491.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:11.894Z,1516398491.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:11.915Z,1516398491.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:12.306Z,1516398492.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:12.325Z,1516398492.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:12.695Z,1516398492.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:12.709Z,1516398492.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:13.093Z,1516398493.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:13.146Z,1516398493.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:13.495Z,1516398493.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:13.515Z,1516398493.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:13.880Z,1516398493.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:13.906Z,1516398493.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:14.292Z,1516398494.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:14.311Z,1516398494.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:14.701Z,1516398494.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:14.715Z,1516398494.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:15.108Z,1516398495.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:15.122Z,1516398495.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:15.502Z,1516398495.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:15.519Z,1516398495.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:15.886Z,1516398495.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:15.908Z,1516398495.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:16.300Z,1516398496.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:16.350Z,1516398496.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:16.680Z,1516398496.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:16.705Z,1516398496.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:17.083Z,1516398497.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:17.114Z,1516398497.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:17.503Z,1516398497.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:17.517Z,1516398497.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:17.909Z,1516398497.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:17.923Z,1516398497.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:18.302Z,1516398498.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:18.316Z,1516398498.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:18.683Z,1516398498.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:18.718Z,1516398498.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:19.097Z,1516398499.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:19.111Z,1516398499.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:19.516Z,1516398499.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:19.559Z,1516398499.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:19.909Z,1516398499.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:19.922Z,1516398499.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:20.282Z,1516398500.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:20.305Z,1516398500.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:20.695Z,1516398500.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:20.725Z,1516398500.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:21.114Z,1516398501.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:21.128Z,1516398501.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:21.128Z,1516398501.128 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-01-19T21:48:21.128Z,1516398501.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:48:21.130Z,1516398501.130 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:21.130Z,1516398501.130 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-01-19T21:48:21.130Z,1516398501.130 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:48:21.132Z,1516398501.132 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:21.132Z,1516398501.132 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-01-19T21:48:21.132Z,1516398501.132 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:48:21.144Z,1516398501.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:48:21.144Z,1516398501.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:48:21.144Z,1516398501.144 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:48:21.504Z,1516398501.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:21.543Z,1516398501.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:48:21.543Z,1516398501.543 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-01-19T21:48:21.544Z,1516398501.544 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:48:21.544Z,1516398501.544 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-01-19T21:48:21.544Z,1516398501.544 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:48:21.544Z,1516398501.544 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-01-19T21:48:21.900Z,1516398501.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:21.932Z,1516398501.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:48:21.932Z,1516398501.932 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:48:21.932Z,1516398501.932 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:48:21.933Z,1516398501.933 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:48:21.933Z,1516398501.933 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:48:21.934Z,1516398501.934 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:48:21.934Z,1516398501.934 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:48:21.935Z,1516398501.935 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:48:21.935Z,1516398501.935 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:48:22.293Z,1516398502.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:22.310Z,1516398502.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:48:22.311Z,1516398502.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:22.730Z,1516398502.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:22.756Z,1516398502.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:48:22.762Z,1516398502.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:23.096Z,1516398503.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:23.110Z,1516398503.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T21:48:23.111Z,1516398503.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:23.508Z,1516398503.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:23.542Z,1516398503.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T21:48:23.543Z,1516398503.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:23.898Z,1516398503.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:23.914Z,1516398503.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T21:48:23.915Z,1516398503.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:24.298Z,1516398504.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:24.312Z,1516398504.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T21:48:24.313Z,1516398504.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:24.692Z,1516398504.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:24.705Z,1516398504.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T21:48:24.706Z,1516398504.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:25.091Z,1516398505.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:25.110Z,1516398505.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T21:48:25.111Z,1516398505.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:25.495Z,1516398505.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:25.509Z,1516398505.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T21:48:25.510Z,1516398505.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:25.910Z,1516398505.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:25.977Z,1516398505.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:48:25.978Z,1516398505.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:26.284Z,1516398506.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:26.302Z,1516398506.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:48:26.303Z,1516398506.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:26.696Z,1516398506.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:26.714Z,1516398506.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:48:26.715Z,1516398506.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:27.098Z,1516398507.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:27.118Z,1516398507.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:48:27.119Z,1516398507.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:27.497Z,1516398507.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:27.511Z,1516398507.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:48:27.512Z,1516398507.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:27.893Z,1516398507.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:27.907Z,1516398507.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T21:48:27.908Z,1516398507.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:28.292Z,1516398508.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:28.310Z,1516398508.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T21:48:28.311Z,1516398508.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:28.695Z,1516398508.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:28.709Z,1516398508.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T21:48:28.710Z,1516398508.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:29.116Z,1516398509.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:29.167Z,1516398509.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T21:48:29.168Z,1516398509.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:29.502Z,1516398509.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:29.515Z,1516398509.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T21:48:29.516Z,1516398509.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:29.901Z,1516398509.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:29.915Z,1516398509.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T21:48:29.916Z,1516398509.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:30.318Z,1516398510.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:30.346Z,1516398510.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T21:48:30.347Z,1516398510.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:30.700Z,1516398510.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:30.713Z,1516398510.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T21:48:30.714Z,1516398510.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:31.120Z,1516398511.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:31.155Z,1516398511.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T21:48:31.156Z,1516398511.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:31.505Z,1516398511.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:31.519Z,1516398511.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T21:48:31.520Z,1516398511.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:31.886Z,1516398511.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:31.927Z,1516398511.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:48:31.928Z,1516398511.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:32.282Z,1516398512.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:32.307Z,1516398512.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:48:32.308Z,1516398512.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:32.719Z,1516398512.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:32.747Z,1516398512.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:48:32.748Z,1516398512.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:33.112Z,1516398513.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:33.145Z,1516398513.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:48:33.146Z,1516398513.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:33.502Z,1516398513.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:33.516Z,1516398513.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:48:33.517Z,1516398513.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:33.899Z,1516398513.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:33.918Z,1516398513.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T21:48:33.919Z,1516398513.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:34.292Z,1516398514.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:34.306Z,1516398514.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:48:34.307Z,1516398514.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:34.697Z,1516398514.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:34.719Z,1516398514.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:48:34.720Z,1516398514.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:35.094Z,1516398515.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:35.112Z,1516398515.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:48:35.121Z,1516398515.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:35.505Z,1516398515.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:35.539Z,1516398515.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T21:48:35.540Z,1516398515.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:35.914Z,1516398515.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:35.992Z,1516398515.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-19T21:48:36.006Z,1516398516.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:36.319Z,1516398516.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:36.334Z,1516398516.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T21:48:36.334Z,1516398516.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:36.693Z,1516398516.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:36.766Z,1516398516.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T21:48:36.767Z,1516398516.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:37.103Z,1516398517.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:37.149Z,1516398517.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T21:48:37.150Z,1516398517.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:37.500Z,1516398517.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:37.524Z,1516398517.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T21:48:37.529Z,1516398517.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:37.909Z,1516398517.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:37.968Z,1516398517.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T21:48:37.969Z,1516398517.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:38.285Z,1516398518.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:38.319Z,1516398518.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T21:48:38.319Z,1516398518.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:38.696Z,1516398518.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:38.732Z,1516398518.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T21:48:38.737Z,1516398518.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:39.135Z,1516398519.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:39.191Z,1516398519.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-19T21:48:39.192Z,1516398519.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:39.505Z,1516398519.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:39.549Z,1516398519.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T21:48:39.550Z,1516398519.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:39.888Z,1516398519.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:39.902Z,1516398519.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T21:48:39.903Z,1516398519.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:40.288Z,1516398520.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:40.317Z,1516398520.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:48:40.318Z,1516398520.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:40.696Z,1516398520.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:40.710Z,1516398520.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T21:48:40.711Z,1516398520.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:41.090Z,1516398521.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:41.108Z,1516398521.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T21:48:41.109Z,1516398521.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:41.502Z,1516398521.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:41.516Z,1516398521.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:41.901Z,1516398521.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:41.915Z,1516398521.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:42.301Z,1516398522.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:42.315Z,1516398522.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:42.693Z,1516398522.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:42.707Z,1516398522.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:43.082Z,1516398523.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:43.104Z,1516398523.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:43.501Z,1516398523.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:43.515Z,1516398523.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:43.905Z,1516398523.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:43.919Z,1516398523.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:44.294Z,1516398524.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:44.321Z,1516398524.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:44.696Z,1516398524.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:44.710Z,1516398524.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:45.084Z,1516398525.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:45.111Z,1516398525.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:45.494Z,1516398525.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:45.516Z,1516398525.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:45.905Z,1516398525.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:45.919Z,1516398525.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:46.303Z,1516398526.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:46.317Z,1516398526.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:46.684Z,1516398526.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:46.710Z,1516398526.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:47.103Z,1516398527.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:47.123Z,1516398527.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:47.507Z,1516398527.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:47.521Z,1516398527.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:47.902Z,1516398527.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:47.917Z,1516398527.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:48.298Z,1516398528.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:48.319Z,1516398528.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:48.684Z,1516398528.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:48.723Z,1516398528.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:49.087Z,1516398529.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:49.118Z,1516398529.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:49.494Z,1516398529.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:49.531Z,1516398529.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:49.912Z,1516398529.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:49.931Z,1516398529.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:50.297Z,1516398530.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:50.316Z,1516398530.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:50.718Z,1516398530.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:50.732Z,1516398530.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:51.092Z,1516398531.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:51.121Z,1516398531.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:51.508Z,1516398531.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:51.522Z,1516398531.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:51.907Z,1516398531.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:51.921Z,1516398531.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:52.309Z,1516398532.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:52.323Z,1516398532.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:52.689Z,1516398532.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:52.718Z,1516398532.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:53.090Z,1516398533.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:53.117Z,1516398533.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:53.498Z,1516398533.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:53.525Z,1516398533.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:53.898Z,1516398533.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:53.923Z,1516398533.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:54.302Z,1516398534.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:54.327Z,1516398534.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:54.689Z,1516398534.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:54.703Z,1516398534.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:55.088Z,1516398535.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:55.107Z,1516398535.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:55.502Z,1516398535.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:55.532Z,1516398535.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:55.902Z,1516398535.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:55.916Z,1516398535.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:56.299Z,1516398536.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:56.313Z,1516398536.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:56.316Z,1516398536.316 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T21:43:56.0Z
2018-01-19T21:48:56.316Z,1516398536.316 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T21:48:56.317Z,1516398536.317 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T21:48:56.695Z,1516398536.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:56.709Z,1516398536.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:57.136Z,1516398537.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:57.150Z,1516398537.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:48:57.500Z,1516398537.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:48:57.515Z,1516398537.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:00.603Z,1516398540.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:00.617Z,1516398540.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:00.693Z,1516398540.693 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0016.lzma
2018-01-19T21:49:00.732Z,1516398540.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:00.788Z,1516398540.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:01.102Z,1516398541.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:01.117Z,1516398541.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:01.467Z,1516398541.467 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0016.lzma.bak
2018-01-19T21:49:01.467Z,1516398541.467 [DataOverHttps](INFO): SBD MOMSN=7724221
2018-01-19T21:49:01.507Z,1516398541.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:01.538Z,1516398541.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:01.982Z,1516398541.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:02.004Z,1516398542.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:02.300Z,1516398542.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:02.314Z,1516398542.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:05.410Z,1516398545.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:05.424Z,1516398545.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:05.544Z,1516398545.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:05.579Z,1516398545.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:05.926Z,1516398545.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:05.968Z,1516398545.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:06.316Z,1516398546.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:06.350Z,1516398546.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:06.717Z,1516398546.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:06.731Z,1516398546.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:07.118Z,1516398547.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:07.132Z,1516398547.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:10.226Z,1516398550.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:10.240Z,1516398550.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:10.278Z,1516398550.278 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T21:49:10.321Z,1516398550.321 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180119T210901/Express0017.lzma
2018-01-19T21:49:10.367Z,1516398550.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:10.403Z,1516398550.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:10.730Z,1516398550.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:10.760Z,1516398550.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:11.091Z,1516398551.091 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0017.lzma.bak
2018-01-19T21:49:11.091Z,1516398551.091 [DataOverHttps](INFO): SBD MOMSN=7724223
2018-01-19T21:49:11.133Z,1516398551.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:11.163Z,1516398551.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:11.607Z,1516398551.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:11.622Z,1516398551.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:11.625Z,1516398551.625 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T21:49:11.625Z,1516398551.625 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T21:49:11.625Z,1516398551.625 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T21:49:11.920Z,1516398551.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:11.935Z,1516398551.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:15.186Z,1516398555.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:15.200Z,1516398555.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:15.333Z,1516398555.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:15.347Z,1516398555.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:15.676Z,1516398555.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:15.711Z,1516398555.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:16.063Z,1516398556.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:16.077Z,1516398556.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:16.441Z,1516398556.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:16.455Z,1516398556.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:16.852Z,1516398556.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:16.866Z,1516398556.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:17.251Z,1516398557.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:17.265Z,1516398557.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:17.675Z,1516398557.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:17.691Z,1516398557.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:18.079Z,1516398558.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:18.099Z,1516398558.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:18.470Z,1516398558.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:18.483Z,1516398558.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:18.845Z,1516398558.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:18.867Z,1516398558.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:19.251Z,1516398559.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:19.282Z,1516398559.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:19.647Z,1516398559.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:19.683Z,1516398559.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:20.052Z,1516398560.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:20.083Z,1516398560.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:20.447Z,1516398560.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:20.482Z,1516398560.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:20.854Z,1516398560.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:20.888Z,1516398560.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:21.254Z,1516398561.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:21.279Z,1516398561.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:21.658Z,1516398561.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:21.690Z,1516398561.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:22.051Z,1516398562.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:22.084Z,1516398562.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:22.445Z,1516398562.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:22.459Z,1516398562.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:22.856Z,1516398562.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:22.886Z,1516398562.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:23.248Z,1516398563.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:23.290Z,1516398563.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:23.655Z,1516398563.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:23.687Z,1516398563.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:24.062Z,1516398564.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:24.095Z,1516398564.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:24.459Z,1516398564.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:24.485Z,1516398564.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:24.845Z,1516398564.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:24.860Z,1516398564.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:25.256Z,1516398565.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:25.290Z,1516398565.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:25.647Z,1516398565.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:25.663Z,1516398565.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:26.056Z,1516398566.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:26.071Z,1516398566.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:26.458Z,1516398566.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:26.475Z,1516398566.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:26.871Z,1516398566.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:26.900Z,1516398566.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:27.254Z,1516398567.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:27.268Z,1516398567.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:27.662Z,1516398567.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:27.676Z,1516398567.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:28.056Z,1516398568.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:28.070Z,1516398568.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:28.451Z,1516398568.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:28.465Z,1516398568.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:28.864Z,1516398568.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:28.878Z,1516398568.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:29.249Z,1516398569.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:29.275Z,1516398569.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:29.663Z,1516398569.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:29.683Z,1516398569.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:30.066Z,1516398570.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:30.080Z,1516398570.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:30.465Z,1516398570.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:30.479Z,1516398570.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:30.854Z,1516398570.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:30.872Z,1516398570.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:31.250Z,1516398571.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:31.272Z,1516398571.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:31.656Z,1516398571.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:31.673Z,1516398571.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:32.044Z,1516398572.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:32.079Z,1516398572.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:32.459Z,1516398572.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:32.479Z,1516398572.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:32.861Z,1516398572.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:32.883Z,1516398572.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:33.266Z,1516398573.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:33.280Z,1516398573.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:33.669Z,1516398573.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:33.691Z,1516398573.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:34.059Z,1516398574.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:34.075Z,1516398574.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:34.460Z,1516398574.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:34.477Z,1516398574.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:34.854Z,1516398574.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:34.876Z,1516398574.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:35.243Z,1516398575.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:35.271Z,1516398575.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:35.667Z,1516398575.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:35.682Z,1516398575.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:36.070Z,1516398576.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:36.091Z,1516398576.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:36.470Z,1516398576.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:36.484Z,1516398576.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:36.861Z,1516398576.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:36.876Z,1516398576.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:37.247Z,1516398577.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:37.278Z,1516398577.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:37.664Z,1516398577.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:37.678Z,1516398577.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:38.060Z,1516398578.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:38.075Z,1516398578.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:38.447Z,1516398578.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:38.472Z,1516398578.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:38.866Z,1516398578.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:38.880Z,1516398578.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:39.266Z,1516398579.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:39.281Z,1516398579.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:39.666Z,1516398579.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:39.680Z,1516398579.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:40.060Z,1516398580.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:40.074Z,1516398580.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:40.445Z,1516398580.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:40.467Z,1516398580.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:40.848Z,1516398580.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:40.878Z,1516398580.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:41.243Z,1516398581.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:41.277Z,1516398581.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:41.654Z,1516398581.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:41.679Z,1516398581.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:42.070Z,1516398582.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:42.087Z,1516398582.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:42.453Z,1516398582.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:42.487Z,1516398582.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:42.843Z,1516398582.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:42.884Z,1516398582.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:43.247Z,1516398583.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:43.283Z,1516398583.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:43.651Z,1516398583.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:43.665Z,1516398583.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:44.052Z,1516398584.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:44.067Z,1516398584.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:44.455Z,1516398584.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:44.491Z,1516398584.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:44.862Z,1516398584.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:44.897Z,1516398584.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:45.254Z,1516398585.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:45.275Z,1516398585.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:45.670Z,1516398585.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:45.691Z,1516398585.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:46.051Z,1516398586.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:46.065Z,1516398586.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:46.452Z,1516398586.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:46.467Z,1516398586.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:46.855Z,1516398586.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:46.869Z,1516398586.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:47.260Z,1516398587.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:47.274Z,1516398587.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:47.654Z,1516398587.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:47.668Z,1516398587.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:48.066Z,1516398588.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:48.096Z,1516398588.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:48.454Z,1516398588.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:48.474Z,1516398588.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:48.845Z,1516398588.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:48.871Z,1516398588.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:49.261Z,1516398589.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:49.275Z,1516398589.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:49.658Z,1516398589.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:49.671Z,1516398589.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:50.059Z,1516398590.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:50.073Z,1516398590.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:50.457Z,1516398590.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:50.472Z,1516398590.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:50.862Z,1516398590.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:50.876Z,1516398590.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:51.256Z,1516398591.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:51.282Z,1516398591.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:51.663Z,1516398591.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:51.677Z,1516398591.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:52.062Z,1516398592.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:52.076Z,1516398592.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:52.454Z,1516398592.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:52.469Z,1516398592.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:52.851Z,1516398592.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:52.879Z,1516398592.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:53.261Z,1516398593.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:53.275Z,1516398593.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:53.666Z,1516398593.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:53.681Z,1516398593.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:54.063Z,1516398594.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:54.083Z,1516398594.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:54.465Z,1516398594.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:54.480Z,1516398594.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:54.853Z,1516398594.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:54.867Z,1516398594.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:55.255Z,1516398595.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:55.269Z,1516398595.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:55.652Z,1516398595.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:55.671Z,1516398595.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:56.060Z,1516398596.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:56.074Z,1516398596.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:56.459Z,1516398596.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:56.479Z,1516398596.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:56.865Z,1516398596.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:56.879Z,1516398596.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:57.261Z,1516398597.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:57.275Z,1516398597.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:57.664Z,1516398597.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:57.683Z,1516398597.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:58.060Z,1516398598.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:58.074Z,1516398598.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:58.453Z,1516398598.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:58.467Z,1516398598.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:58.854Z,1516398598.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:58.872Z,1516398598.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:59.256Z,1516398599.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:59.274Z,1516398599.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:49:59.665Z,1516398599.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:49:59.680Z,1516398599.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:00.065Z,1516398600.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:00.082Z,1516398600.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:00.465Z,1516398600.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:00.482Z,1516398600.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:00.885Z,1516398600.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:00.910Z,1516398600.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:01.258Z,1516398601.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:01.272Z,1516398601.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:01.657Z,1516398601.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:01.678Z,1516398601.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:02.061Z,1516398602.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:02.075Z,1516398602.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:02.456Z,1516398602.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:02.470Z,1516398602.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:02.863Z,1516398602.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:02.888Z,1516398602.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:03.262Z,1516398603.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:03.293Z,1516398603.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:03.666Z,1516398603.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:03.687Z,1516398603.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:04.042Z,1516398604.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:04.076Z,1516398604.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:04.445Z,1516398604.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:04.476Z,1516398604.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:04.852Z,1516398604.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:04.879Z,1516398604.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:05.243Z,1516398605.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:05.280Z,1516398605.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:05.666Z,1516398605.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:05.682Z,1516398605.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:06.067Z,1516398606.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:06.088Z,1516398606.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:06.453Z,1516398606.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:06.480Z,1516398606.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:06.843Z,1516398606.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:06.879Z,1516398606.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:07.247Z,1516398607.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:07.278Z,1516398607.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:07.647Z,1516398607.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:07.683Z,1516398607.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:08.052Z,1516398608.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:08.077Z,1516398608.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:08.447Z,1516398608.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:08.478Z,1516398608.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:08.854Z,1516398608.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:08.887Z,1516398608.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:09.266Z,1516398609.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:09.281Z,1516398609.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:09.666Z,1516398609.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:09.680Z,1516398609.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:10.043Z,1516398610.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:10.079Z,1516398610.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:10.445Z,1516398610.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:10.467Z,1516398610.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:10.871Z,1516398610.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:10.893Z,1516398610.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:11.249Z,1516398611.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:11.343Z,1516398611.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:11.664Z,1516398611.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:11.700Z,1516398611.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:12.076Z,1516398612.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:12.110Z,1516398612.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:15.258Z,1516398615.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:15.295Z,1516398615.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:15.376Z,1516398615.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:15.419Z,1516398615.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:15.754Z,1516398615.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:15.768Z,1516398615.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:16.154Z,1516398616.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:16.168Z,1516398616.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:16.543Z,1516398616.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:16.563Z,1516398616.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:16.968Z,1516398616.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:16.999Z,1516398616.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:17.354Z,1516398617.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:17.368Z,1516398617.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:17.757Z,1516398617.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:17.771Z,1516398617.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:18.156Z,1516398618.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:18.170Z,1516398618.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:18.555Z,1516398618.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:18.569Z,1516398618.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:18.948Z,1516398618.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:18.966Z,1516398618.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:19.356Z,1516398619.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:19.370Z,1516398619.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:19.758Z,1516398619.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:19.772Z,1516398619.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:20.157Z,1516398620.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:20.171Z,1516398620.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:20.557Z,1516398620.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:20.571Z,1516398620.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:20.949Z,1516398620.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:20.963Z,1516398620.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:21.348Z,1516398621.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:21.370Z,1516398621.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:21.758Z,1516398621.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:21.772Z,1516398621.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:22.153Z,1516398622.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:22.167Z,1516398622.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:22.543Z,1516398622.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:22.574Z,1516398622.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:22.975Z,1516398622.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:23.001Z,1516398623.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:23.358Z,1516398623.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:23.372Z,1516398623.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:23.757Z,1516398623.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:23.771Z,1516398623.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:24.150Z,1516398624.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:24.168Z,1516398624.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:24.553Z,1516398624.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:24.567Z,1516398624.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:24.956Z,1516398624.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:24.971Z,1516398624.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:25.350Z,1516398625.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:25.368Z,1516398625.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:25.758Z,1516398625.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:25.773Z,1516398625.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:26.157Z,1516398626.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:26.171Z,1516398626.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:26.562Z,1516398626.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:26.576Z,1516398626.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:26.951Z,1516398626.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:26.977Z,1516398626.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:27.344Z,1516398627.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:27.366Z,1516398627.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:27.748Z,1516398627.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:27.769Z,1516398627.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:28.152Z,1516398628.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:28.179Z,1516398628.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:28.538Z,1516398628.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:28.564Z,1516398628.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:28.962Z,1516398628.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:28.976Z,1516398628.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:29.366Z,1516398629.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:29.381Z,1516398629.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:29.753Z,1516398629.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:29.780Z,1516398629.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:30.156Z,1516398630.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:30.170Z,1516398630.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:30.544Z,1516398630.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:30.593Z,1516398630.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:30.941Z,1516398630.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:30.975Z,1516398630.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:31.344Z,1516398631.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:31.375Z,1516398631.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:31.764Z,1516398631.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:31.778Z,1516398631.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:32.158Z,1516398632.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:32.188Z,1516398632.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:32.558Z,1516398632.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:32.588Z,1516398632.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:32.948Z,1516398632.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:32.976Z,1516398632.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:33.340Z,1516398633.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:33.370Z,1516398633.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:33.748Z,1516398633.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:33.773Z,1516398633.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:34.145Z,1516398634.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:34.176Z,1516398634.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:34.548Z,1516398634.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:34.578Z,1516398634.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:34.954Z,1516398634.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:34.991Z,1516398634.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:35.371Z,1516398635.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:35.386Z,1516398635.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:35.765Z,1516398635.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:35.779Z,1516398635.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:36.148Z,1516398636.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:36.178Z,1516398636.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:36.549Z,1516398636.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:36.563Z,1516398636.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:36.949Z,1516398636.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:36.987Z,1516398636.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:37.355Z,1516398637.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:37.370Z,1516398637.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:37.767Z,1516398637.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:37.795Z,1516398637.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:38.155Z,1516398638.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:38.169Z,1516398638.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:38.563Z,1516398638.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:38.589Z,1516398638.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:38.954Z,1516398638.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:38.969Z,1516398638.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:39.354Z,1516398639.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:39.368Z,1516398639.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:39.752Z,1516398639.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:39.767Z,1516398639.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:40.150Z,1516398640.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:40.164Z,1516398640.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:40.550Z,1516398640.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:40.564Z,1516398640.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:40.962Z,1516398640.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:40.976Z,1516398640.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:41.366Z,1516398641.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:41.380Z,1516398641.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:41.763Z,1516398641.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:41.783Z,1516398641.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:42.156Z,1516398642.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:42.170Z,1516398642.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:42.549Z,1516398642.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:42.564Z,1516398642.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:42.945Z,1516398642.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:42.979Z,1516398642.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:43.350Z,1516398643.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:43.370Z,1516398643.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:43.762Z,1516398643.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:43.777Z,1516398643.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:44.162Z,1516398644.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:44.177Z,1516398644.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:44.558Z,1516398644.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:44.574Z,1516398644.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:44.949Z,1516398644.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:44.963Z,1516398644.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:45.344Z,1516398645.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:45.374Z,1516398645.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:45.755Z,1516398645.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:45.769Z,1516398645.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:46.150Z,1516398646.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:46.163Z,1516398646.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:46.556Z,1516398646.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:46.571Z,1516398646.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:46.958Z,1516398646.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:46.973Z,1516398646.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:47.358Z,1516398647.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:47.372Z,1516398647.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:47.762Z,1516398647.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:47.783Z,1516398647.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:48.156Z,1516398648.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:48.175Z,1516398648.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:48.557Z,1516398648.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:48.571Z,1516398648.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:48.949Z,1516398648.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:48.979Z,1516398648.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:49.357Z,1516398649.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:49.371Z,1516398649.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:49.762Z,1516398649.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:49.776Z,1516398649.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:50.162Z,1516398650.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:50.176Z,1516398650.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:50.561Z,1516398650.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:50.581Z,1516398650.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:50.950Z,1516398650.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:50.964Z,1516398650.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:51.357Z,1516398651.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:51.371Z,1516398651.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:51.750Z,1516398651.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:51.770Z,1516398651.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:52.150Z,1516398652.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:52.164Z,1516398652.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:52.540Z,1516398652.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:52.571Z,1516398652.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:52.965Z,1516398652.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:52.987Z,1516398652.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:53.366Z,1516398653.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:53.380Z,1516398653.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:53.765Z,1516398653.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:53.780Z,1516398653.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:54.163Z,1516398654.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:54.178Z,1516398654.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:54.557Z,1516398654.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:54.571Z,1516398654.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:54.957Z,1516398654.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:54.971Z,1516398654.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:55.354Z,1516398655.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:55.373Z,1516398655.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:55.756Z,1516398655.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:55.777Z,1516398655.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:56.169Z,1516398656.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:56.183Z,1516398656.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:56.566Z,1516398656.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:56.587Z,1516398656.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:56.957Z,1516398656.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:56.971Z,1516398656.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:57.356Z,1516398657.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:57.371Z,1516398657.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:57.743Z,1516398657.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:57.774Z,1516398657.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:58.147Z,1516398658.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:58.174Z,1516398658.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:58.548Z,1516398658.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:58.573Z,1516398658.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:58.956Z,1516398658.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:58.982Z,1516398658.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:59.373Z,1516398659.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:59.394Z,1516398659.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:50:59.767Z,1516398659.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:50:59.783Z,1516398659.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:00.147Z,1516398660.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:00.173Z,1516398660.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:00.544Z,1516398660.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:00.571Z,1516398660.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:00.948Z,1516398660.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:00.974Z,1516398660.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:01.343Z,1516398661.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:01.378Z,1516398661.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:01.771Z,1516398661.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:01.785Z,1516398661.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:02.171Z,1516398662.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:02.185Z,1516398662.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:02.566Z,1516398662.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:02.580Z,1516398662.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:02.943Z,1516398662.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:02.976Z,1516398662.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:03.348Z,1516398663.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:03.374Z,1516398663.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:03.743Z,1516398663.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:03.770Z,1516398663.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:04.147Z,1516398664.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:04.180Z,1516398664.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:04.548Z,1516398664.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:04.583Z,1516398664.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:04.958Z,1516398664.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:04.987Z,1516398664.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:05.358Z,1516398665.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:05.393Z,1516398665.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:05.773Z,1516398665.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:05.787Z,1516398665.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:06.144Z,1516398666.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:06.178Z,1516398666.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:06.548Z,1516398666.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:06.562Z,1516398666.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:06.946Z,1516398666.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:06.960Z,1516398666.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:07.347Z,1516398667.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:07.367Z,1516398667.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:07.762Z,1516398667.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:07.795Z,1516398667.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:08.158Z,1516398668.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:08.172Z,1516398668.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:08.566Z,1516398668.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:08.596Z,1516398668.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:08.948Z,1516398668.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:08.966Z,1516398668.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:09.350Z,1516398669.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:09.364Z,1516398669.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:09.754Z,1516398669.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:09.775Z,1516398669.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:10.151Z,1516398670.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:10.165Z,1516398670.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:10.553Z,1516398670.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:10.575Z,1516398670.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:10.966Z,1516398670.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:10.998Z,1516398670.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:11.366Z,1516398671.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:11.380Z,1516398671.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:11.758Z,1516398671.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:11.772Z,1516398671.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:12.155Z,1516398672.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:12.169Z,1516398672.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:15.257Z,1516398675.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:15.271Z,1516398675.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:15.380Z,1516398675.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:15.423Z,1516398675.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:15.758Z,1516398675.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:15.773Z,1516398675.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:16.162Z,1516398676.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:16.176Z,1516398676.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:16.559Z,1516398676.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:16.573Z,1516398676.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:16.953Z,1516398676.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:16.967Z,1516398676.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:17.354Z,1516398677.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:17.368Z,1516398677.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:17.735Z,1516398677.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:17.771Z,1516398677.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:18.147Z,1516398678.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:18.167Z,1516398678.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:18.554Z,1516398678.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:18.569Z,1516398678.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:18.962Z,1516398678.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:18.983Z,1516398678.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:19.361Z,1516398679.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:19.376Z,1516398679.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:19.763Z,1516398679.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:19.783Z,1516398679.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:20.153Z,1516398680.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:20.167Z,1516398680.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:20.552Z,1516398680.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:20.567Z,1516398680.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:20.936Z,1516398680.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:20.962Z,1516398680.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:21.346Z,1516398681.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:21.364Z,1516398681.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:21.755Z,1516398681.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:21.782Z,1516398681.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:22.166Z,1516398682.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:22.183Z,1516398682.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:22.183Z,1516398682.183 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-01-19T21:51:22.183Z,1516398682.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:51:22.185Z,1516398682.185 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:22.185Z,1516398682.185 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-01-19T21:51:22.185Z,1516398682.185 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:51:22.187Z,1516398682.187 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:22.187Z,1516398682.187 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-01-19T21:51:22.187Z,1516398682.187 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:51:22.243Z,1516398682.243 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:51:22.244Z,1516398682.244 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:51:22.244Z,1516398682.244 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:51:22.561Z,1516398682.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:22.586Z,1516398682.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:51:22.586Z,1516398682.586 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-01-19T21:51:22.587Z,1516398682.587 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:51:22.587Z,1516398682.587 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-01-19T21:51:22.587Z,1516398682.587 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:51:22.588Z,1516398682.588 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-01-19T21:51:22.956Z,1516398682.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:22.972Z,1516398682.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:51:22.972Z,1516398682.972 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:51:22.972Z,1516398682.972 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:51:22.997Z,1516398682.997 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:51:22.998Z,1516398682.998 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:51:22.998Z,1516398682.998 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:51:22.998Z,1516398682.998 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:51:22.999Z,1516398682.999 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:51:22.999Z,1516398682.999 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:51:23.335Z,1516398683.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:23.370Z,1516398683.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:51:23.370Z,1516398683.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:23.761Z,1516398683.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:23.775Z,1516398683.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:51:23.776Z,1516398683.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:24.161Z,1516398684.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:24.182Z,1516398684.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T21:51:24.183Z,1516398684.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:24.563Z,1516398684.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:24.576Z,1516398684.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T21:51:24.577Z,1516398684.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:24.953Z,1516398684.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:24.967Z,1516398684.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T21:51:24.968Z,1516398684.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:25.340Z,1516398685.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:25.365Z,1516398685.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T21:51:25.366Z,1516398685.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:25.753Z,1516398685.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:25.776Z,1516398685.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T21:51:25.777Z,1516398685.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:26.159Z,1516398686.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:26.172Z,1516398686.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T21:51:26.174Z,1516398686.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:26.562Z,1516398686.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:26.576Z,1516398686.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T21:51:26.577Z,1516398686.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:26.955Z,1516398686.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:26.968Z,1516398686.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:51:26.969Z,1516398686.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:27.334Z,1516398687.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:27.370Z,1516398687.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:51:27.371Z,1516398687.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:27.763Z,1516398687.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:27.777Z,1516398687.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:51:27.778Z,1516398687.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:28.160Z,1516398688.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:28.178Z,1516398688.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:51:28.179Z,1516398688.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:28.567Z,1516398688.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:28.581Z,1516398688.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:51:28.582Z,1516398688.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:28.941Z,1516398688.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:28.967Z,1516398688.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T21:51:28.968Z,1516398688.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:29.335Z,1516398689.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:29.373Z,1516398689.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T21:51:29.374Z,1516398689.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:29.750Z,1516398689.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:29.783Z,1516398689.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T21:51:29.784Z,1516398689.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:30.163Z,1516398690.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:30.177Z,1516398690.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T21:51:30.178Z,1516398690.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:30.555Z,1516398690.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:30.574Z,1516398690.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T21:51:30.575Z,1516398690.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:30.944Z,1516398690.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:30.971Z,1516398690.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T21:51:30.972Z,1516398690.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:31.340Z,1516398691.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:31.364Z,1516398691.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T21:51:31.366Z,1516398691.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:31.763Z,1516398691.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:31.777Z,1516398691.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T21:51:31.778Z,1516398691.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:32.166Z,1516398692.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:32.180Z,1516398692.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T21:51:32.182Z,1516398692.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:32.557Z,1516398692.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:32.575Z,1516398692.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T21:51:32.576Z,1516398692.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:32.936Z,1516398692.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:32.971Z,1516398692.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:51:32.972Z,1516398692.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:33.338Z,1516398693.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:33.364Z,1516398693.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:51:33.365Z,1516398693.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:33.754Z,1516398693.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:33.775Z,1516398693.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:51:33.776Z,1516398693.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:34.159Z,1516398694.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:34.172Z,1516398694.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:51:34.173Z,1516398694.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:34.550Z,1516398694.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:34.572Z,1516398694.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:51:34.573Z,1516398694.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:34.940Z,1516398694.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:34.990Z,1516398694.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T21:51:34.991Z,1516398694.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:35.343Z,1516398695.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:35.369Z,1516398695.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:51:35.370Z,1516398695.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:35.758Z,1516398695.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:35.772Z,1516398695.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:51:35.773Z,1516398695.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:36.162Z,1516398696.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:36.176Z,1516398696.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:51:36.177Z,1516398696.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:36.555Z,1516398696.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:36.574Z,1516398696.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T21:51:36.575Z,1516398696.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:36.944Z,1516398696.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:36.970Z,1516398696.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T21:51:36.970Z,1516398696.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:37.340Z,1516398697.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:37.363Z,1516398697.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T21:51:37.364Z,1516398697.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:37.754Z,1516398697.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:37.768Z,1516398697.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T21:51:37.768Z,1516398697.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:38.154Z,1516398698.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:38.186Z,1516398698.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T21:51:38.187Z,1516398698.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:38.566Z,1516398698.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:38.580Z,1516398698.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T21:51:38.581Z,1516398698.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:38.940Z,1516398698.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:38.954Z,1516398698.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T21:51:38.955Z,1516398698.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:39.338Z,1516398699.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:39.351Z,1516398699.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T21:51:39.352Z,1516398699.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:39.758Z,1516398699.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:39.781Z,1516398699.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T21:51:39.782Z,1516398699.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:40.162Z,1516398700.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:40.186Z,1516398700.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T21:51:40.187Z,1516398700.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:40.546Z,1516398700.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:40.560Z,1516398700.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T21:51:40.561Z,1516398700.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:40.948Z,1516398700.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:40.988Z,1516398700.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T21:51:40.989Z,1516398700.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:41.348Z,1516398701.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:41.361Z,1516398701.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:51:41.362Z,1516398701.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:41.746Z,1516398701.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:41.783Z,1516398701.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T21:51:41.784Z,1516398701.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:42.162Z,1516398702.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:42.191Z,1516398702.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:42.550Z,1516398702.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:42.564Z,1516398702.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:42.948Z,1516398702.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:42.983Z,1516398702.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:43.347Z,1516398703.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:43.364Z,1516398703.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:43.768Z,1516398703.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:43.795Z,1516398703.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:44.158Z,1516398704.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:44.172Z,1516398704.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:44.554Z,1516398704.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:44.568Z,1516398704.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:44.950Z,1516398704.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:44.964Z,1516398704.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:45.349Z,1516398705.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:45.364Z,1516398705.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:45.750Z,1516398705.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:45.764Z,1516398705.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:46.162Z,1516398706.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:46.176Z,1516398706.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:46.550Z,1516398706.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:46.564Z,1516398706.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:46.946Z,1516398706.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:46.965Z,1516398706.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:47.345Z,1516398707.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:47.359Z,1516398707.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:47.750Z,1516398707.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:47.764Z,1516398707.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:48.162Z,1516398708.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:48.176Z,1516398708.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:48.554Z,1516398708.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:48.574Z,1516398708.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:48.937Z,1516398708.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:48.959Z,1516398708.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:49.346Z,1516398709.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:49.368Z,1516398709.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:49.753Z,1516398709.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:49.767Z,1516398709.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:50.162Z,1516398710.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:50.176Z,1516398710.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:50.561Z,1516398710.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:50.576Z,1516398710.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:50.962Z,1516398710.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:50.976Z,1516398710.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:51.334Z,1516398711.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:51.368Z,1516398711.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:51.748Z,1516398711.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:51.767Z,1516398711.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:52.150Z,1516398712.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:52.164Z,1516398712.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:52.546Z,1516398712.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:52.564Z,1516398712.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:52.960Z,1516398712.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:52.980Z,1516398712.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:53.362Z,1516398713.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:53.376Z,1516398713.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:53.759Z,1516398713.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:53.781Z,1516398713.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:54.154Z,1516398714.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:54.168Z,1516398714.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:54.535Z,1516398714.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:54.568Z,1516398714.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:54.954Z,1516398714.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:54.968Z,1516398714.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:55.350Z,1516398715.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:55.370Z,1516398715.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:55.736Z,1516398715.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:55.775Z,1516398715.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:56.162Z,1516398716.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:56.183Z,1516398716.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:56.565Z,1516398716.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:56.580Z,1516398716.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:56.963Z,1516398716.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:56.977Z,1516398716.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:57.338Z,1516398717.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:57.364Z,1516398717.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:57.743Z,1516398717.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:57.771Z,1516398717.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:58.136Z,1516398718.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:58.168Z,1516398718.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:58.538Z,1516398718.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:58.579Z,1516398718.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:58.962Z,1516398718.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:58.976Z,1516398718.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:59.359Z,1516398719.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:59.374Z,1516398719.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:51:59.754Z,1516398719.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:51:59.785Z,1516398719.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:00.145Z,1516398720.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:00.172Z,1516398720.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:00.548Z,1516398720.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:00.586Z,1516398720.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:00.944Z,1516398720.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:00.958Z,1516398720.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:01.348Z,1516398721.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:01.383Z,1516398721.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:01.748Z,1516398721.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:01.762Z,1516398721.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:02.128Z,1516398722.128 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T21:52:02.128Z,1516398722.128 [NAL9602] Data Fault, FailCount= 4
2018-01-19T21:52:02.128Z,1516398722.128 [NAL9602](ERROR): Data Fault
2018-01-19T21:52:02.146Z,1516398722.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:02.160Z,1516398722.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:02.205Z,1516398722.205 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T21:52:02.526Z,1516398722.526 [NAL9602](INFO): Powering down
2018-01-19T21:52:02.545Z,1516398722.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:02.572Z,1516398722.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:02.951Z,1516398722.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:02.965Z,1516398722.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:03.346Z,1516398723.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:03.360Z,1516398723.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:03.373Z,1516398723.373 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T21:52:03.373Z,1516398723.373 [NAL9602] No Fault, FailCount= 4
2018-01-19T21:52:03.748Z,1516398723.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:03.762Z,1516398723.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:04.152Z,1516398724.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:04.166Z,1516398724.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:04.542Z,1516398724.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:04.556Z,1516398724.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:04.948Z,1516398724.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:04.962Z,1516398724.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:05.352Z,1516398725.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:05.366Z,1516398725.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:05.742Z,1516398725.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:05.756Z,1516398725.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:06.148Z,1516398726.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:06.166Z,1516398726.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:06.545Z,1516398726.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:06.560Z,1516398726.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:06.950Z,1516398726.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:06.965Z,1516398726.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:07.351Z,1516398727.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:07.366Z,1516398727.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:07.743Z,1516398727.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:07.757Z,1516398727.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:08.143Z,1516398728.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:08.158Z,1516398728.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:08.550Z,1516398728.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:08.564Z,1516398728.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:08.951Z,1516398728.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:08.964Z,1516398728.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:09.341Z,1516398729.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:09.355Z,1516398729.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:09.748Z,1516398729.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:09.762Z,1516398729.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:10.151Z,1516398730.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:10.164Z,1516398730.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:10.553Z,1516398730.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:10.568Z,1516398730.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:10.951Z,1516398730.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:10.964Z,1516398730.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:11.351Z,1516398731.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:11.364Z,1516398731.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:11.741Z,1516398731.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:11.755Z,1516398731.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:12.147Z,1516398732.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:12.172Z,1516398732.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:12.547Z,1516398732.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:12.567Z,1516398732.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:15.710Z,1516398735.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:15.724Z,1516398735.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:15.828Z,1516398735.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:15.871Z,1516398735.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:16.207Z,1516398736.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:16.227Z,1516398736.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:16.607Z,1516398736.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:16.621Z,1516398736.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:17.007Z,1516398737.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:17.021Z,1516398737.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:17.411Z,1516398737.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:17.431Z,1516398737.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:17.807Z,1516398737.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:17.821Z,1516398737.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:18.208Z,1516398738.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:18.222Z,1516398738.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:18.608Z,1516398738.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:18.627Z,1516398738.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:19.012Z,1516398739.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:19.026Z,1516398739.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:19.412Z,1516398739.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:19.426Z,1516398739.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:19.812Z,1516398739.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:19.827Z,1516398739.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:20.215Z,1516398740.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:20.229Z,1516398740.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:20.612Z,1516398740.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:20.629Z,1516398740.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:21.021Z,1516398741.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:21.035Z,1516398741.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:21.416Z,1516398741.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:21.430Z,1516398741.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:21.814Z,1516398741.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:21.828Z,1516398741.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:22.208Z,1516398742.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:22.240Z,1516398742.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:22.614Z,1516398742.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:22.628Z,1516398742.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:23.014Z,1516398743.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:23.028Z,1516398743.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:23.414Z,1516398743.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:23.428Z,1516398743.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:23.814Z,1516398743.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:23.828Z,1516398743.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:24.215Z,1516398744.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:24.229Z,1516398744.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:24.608Z,1516398744.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:24.649Z,1516398744.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:25.016Z,1516398745.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:25.030Z,1516398745.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:25.414Z,1516398745.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:25.428Z,1516398745.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:25.808Z,1516398745.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:25.834Z,1516398745.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:26.215Z,1516398746.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:26.228Z,1516398746.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:26.608Z,1516398746.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:26.622Z,1516398746.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:27.006Z,1516398747.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:27.036Z,1516398747.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:27.415Z,1516398747.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:27.429Z,1516398747.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:27.808Z,1516398747.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:27.822Z,1516398747.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:28.209Z,1516398748.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:28.227Z,1516398748.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:28.606Z,1516398748.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:28.621Z,1516398748.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:29.007Z,1516398749.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:29.021Z,1516398749.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:29.409Z,1516398749.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:29.428Z,1516398749.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:29.807Z,1516398749.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:29.826Z,1516398749.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:30.207Z,1516398750.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:30.221Z,1516398750.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:30.609Z,1516398750.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:30.632Z,1516398750.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:31.015Z,1516398751.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:31.029Z,1516398751.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:31.408Z,1516398751.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:31.422Z,1516398751.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:31.810Z,1516398751.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:31.825Z,1516398751.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:32.207Z,1516398752.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:32.229Z,1516398752.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:32.583Z,1516398752.583 [NAL9602](INFO): Powering up NAL9602
2018-01-19T21:52:32.617Z,1516398752.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:32.631Z,1516398752.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:33.014Z,1516398753.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:33.028Z,1516398753.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:33.407Z,1516398753.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:33.421Z,1516398753.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:33.808Z,1516398753.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:33.826Z,1516398753.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:34.210Z,1516398754.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:34.235Z,1516398754.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:34.607Z,1516398754.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:34.627Z,1516398754.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:35.015Z,1516398755.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:35.030Z,1516398755.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:35.409Z,1516398755.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:35.432Z,1516398755.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:35.814Z,1516398755.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:35.828Z,1516398755.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:36.214Z,1516398756.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:36.228Z,1516398756.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:36.612Z,1516398756.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:36.626Z,1516398756.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:37.008Z,1516398757.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:37.026Z,1516398757.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:37.401Z,1516398757.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:37.428Z,1516398757.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:37.816Z,1516398757.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:37.830Z,1516398757.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:38.199Z,1516398758.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:38.231Z,1516398758.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:38.600Z,1516398758.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:38.627Z,1516398758.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:39.006Z,1516398759.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:39.030Z,1516398759.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:39.399Z,1516398759.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:39.434Z,1516398759.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:39.800Z,1516398759.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:39.828Z,1516398759.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:40.206Z,1516398760.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:40.228Z,1516398760.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:40.611Z,1516398760.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:40.625Z,1516398760.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:41.016Z,1516398761.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:41.030Z,1516398761.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:41.412Z,1516398761.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:41.431Z,1516398761.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:41.800Z,1516398761.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:41.826Z,1516398761.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:42.218Z,1516398762.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:42.232Z,1516398762.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:42.611Z,1516398762.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:42.630Z,1516398762.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:43.022Z,1516398763.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:43.042Z,1516398763.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:43.384Z,1516398763.384 [NAL9602](INFO): NAL9602 initialized
2018-01-19T21:52:43.414Z,1516398763.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:43.436Z,1516398763.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:43.810Z,1516398763.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:43.831Z,1516398763.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:44.219Z,1516398764.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:44.238Z,1516398764.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:44.622Z,1516398764.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:44.643Z,1516398764.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:45.041Z,1516398765.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:45.055Z,1516398765.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:45.412Z,1516398765.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:45.443Z,1516398765.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:45.799Z,1516398765.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:45.825Z,1516398765.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:46.212Z,1516398766.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:46.226Z,1516398766.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:46.612Z,1516398766.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:46.627Z,1516398766.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:47.010Z,1516398767.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:47.025Z,1516398767.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:47.423Z,1516398767.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:47.451Z,1516398767.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:47.810Z,1516398767.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:47.824Z,1516398767.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:48.213Z,1516398768.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:48.227Z,1516398768.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:48.612Z,1516398768.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:48.627Z,1516398768.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:49.026Z,1516398769.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:49.058Z,1516398769.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:49.410Z,1516398769.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:49.424Z,1516398769.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:49.818Z,1516398769.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:49.832Z,1516398769.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:50.206Z,1516398770.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:50.231Z,1516398770.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:50.602Z,1516398770.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:50.622Z,1516398770.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:51.014Z,1516398771.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:51.028Z,1516398771.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:51.426Z,1516398771.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:51.440Z,1516398771.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:51.817Z,1516398771.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:51.839Z,1516398771.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:52.216Z,1516398772.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:52.233Z,1516398772.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:52.614Z,1516398772.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:52.628Z,1516398772.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:53.018Z,1516398773.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:53.033Z,1516398773.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:53.422Z,1516398773.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:53.436Z,1516398773.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:53.818Z,1516398773.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:53.832Z,1516398773.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:54.215Z,1516398774.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:54.235Z,1516398774.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:54.615Z,1516398774.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:54.635Z,1516398774.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:55.018Z,1516398775.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:55.032Z,1516398775.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:55.416Z,1516398775.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:55.435Z,1516398775.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:55.818Z,1516398775.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:55.832Z,1516398775.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:56.214Z,1516398776.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:56.227Z,1516398776.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:56.602Z,1516398776.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:56.624Z,1516398776.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:57.016Z,1516398777.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:57.035Z,1516398777.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:57.422Z,1516398777.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:57.436Z,1516398777.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:57.817Z,1516398777.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:57.839Z,1516398777.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:58.215Z,1516398778.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:58.235Z,1516398778.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:58.616Z,1516398778.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:58.630Z,1516398778.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:59.018Z,1516398779.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:59.033Z,1516398779.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:59.418Z,1516398779.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:59.432Z,1516398779.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:52:59.818Z,1516398779.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:52:59.832Z,1516398779.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:00.209Z,1516398780.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:00.223Z,1516398780.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:00.611Z,1516398780.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:00.625Z,1516398780.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:01.017Z,1516398781.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:01.031Z,1516398781.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:01.417Z,1516398781.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:01.439Z,1516398781.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:01.818Z,1516398781.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:01.832Z,1516398781.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:02.208Z,1516398782.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:02.227Z,1516398782.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:02.601Z,1516398782.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:02.628Z,1516398782.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:03.022Z,1516398783.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:03.036Z,1516398783.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:03.426Z,1516398783.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:03.446Z,1516398783.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:03.814Z,1516398783.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:03.836Z,1516398783.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:04.203Z,1516398784.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:04.228Z,1516398784.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:04.605Z,1516398784.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:04.631Z,1516398784.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:05.007Z,1516398785.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:05.032Z,1516398785.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:05.422Z,1516398785.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:05.436Z,1516398785.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:05.827Z,1516398785.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:05.846Z,1516398785.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:06.230Z,1516398786.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:06.244Z,1516398786.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:06.603Z,1516398786.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:06.628Z,1516398786.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:07.003Z,1516398787.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:07.031Z,1516398787.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:07.408Z,1516398787.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:07.433Z,1516398787.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:07.803Z,1516398787.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:07.828Z,1516398787.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:08.223Z,1516398788.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:08.238Z,1516398788.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:08.629Z,1516398788.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:08.643Z,1516398788.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:09.026Z,1516398789.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:09.040Z,1516398789.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:09.404Z,1516398789.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:09.431Z,1516398789.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:09.803Z,1516398789.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:09.828Z,1516398789.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:10.203Z,1516398790.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:10.228Z,1516398790.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:10.605Z,1516398790.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:10.631Z,1516398790.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:10.999Z,1516398790.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:11.030Z,1516398791.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:11.418Z,1516398791.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:11.439Z,1516398791.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:11.827Z,1516398791.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:11.842Z,1516398791.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:12.211Z,1516398792.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:12.243Z,1516398792.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:12.608Z,1516398792.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:12.638Z,1516398792.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:15.706Z,1516398795.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:15.740Z,1516398795.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:15.825Z,1516398795.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:15.859Z,1516398795.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:16.207Z,1516398796.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:16.235Z,1516398796.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:16.625Z,1516398796.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:16.640Z,1516398796.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:16.998Z,1516398796.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:17.035Z,1516398797.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:17.398Z,1516398797.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:17.413Z,1516398797.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:17.792Z,1516398797.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:17.819Z,1516398797.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:18.194Z,1516398798.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:18.214Z,1516398798.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:18.601Z,1516398798.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:18.616Z,1516398798.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:18.996Z,1516398798.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:19.015Z,1516398799.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:19.399Z,1516398799.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:19.422Z,1516398799.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:19.808Z,1516398799.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:19.827Z,1516398799.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:20.207Z,1516398800.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:20.221Z,1516398800.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:20.600Z,1516398800.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:20.619Z,1516398800.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:20.000Z,1516398801.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:21.014Z,1516398801.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:21.402Z,1516398801.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:21.416Z,1516398801.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:21.796Z,1516398801.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:21.811Z,1516398801.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:22.203Z,1516398802.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:22.233Z,1516398802.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:22.621Z,1516398802.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:22.653Z,1516398802.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:23.030Z,1516398803.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:23.056Z,1516398803.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:23.390Z,1516398803.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:23.441Z,1516398803.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:23.794Z,1516398803.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:23.840Z,1516398803.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:24.195Z,1516398804.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:24.242Z,1516398804.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:24.598Z,1516398804.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:24.612Z,1516398804.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:25.009Z,1516398805.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:25.047Z,1516398805.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:25.398Z,1516398805.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:25.447Z,1516398805.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:25.804Z,1516398805.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:25.840Z,1516398805.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:26.201Z,1516398806.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:26.240Z,1516398806.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:26.599Z,1516398806.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:26.644Z,1516398806.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:26.000Z,1516398807.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:27.047Z,1516398807.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:27.399Z,1516398807.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:27.421Z,1516398807.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:27.798Z,1516398807.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:27.825Z,1516398807.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:28.215Z,1516398808.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:28.239Z,1516398808.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:28.604Z,1516398808.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:28.631Z,1516398808.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:28.999Z,1516398808.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:29.019Z,1516398809.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:29.389Z,1516398809.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:29.407Z,1516398809.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:29.789Z,1516398809.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:29.842Z,1516398809.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:30.190Z,1516398810.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:30.212Z,1516398810.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:30.596Z,1516398810.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:30.612Z,1516398810.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:30.991Z,1516398810.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:31.005Z,1516398811.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:31.402Z,1516398811.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:31.417Z,1516398811.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:31.805Z,1516398811.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:31.819Z,1516398811.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:32.201Z,1516398812.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:32.215Z,1516398812.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:32.584Z,1516398812.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:32.606Z,1516398812.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:32.999Z,1516398812.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:33.025Z,1516398813.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:33.384Z,1516398813.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:33.402Z,1516398813.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:33.785Z,1516398813.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:33.799Z,1516398813.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:34.202Z,1516398814.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:34.227Z,1516398814.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:34.602Z,1516398814.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:34.629Z,1516398814.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:35.002Z,1516398815.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:35.028Z,1516398815.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:35.395Z,1516398815.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:35.430Z,1516398815.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:35.791Z,1516398815.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:35.805Z,1516398815.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:36.189Z,1516398816.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:36.203Z,1516398816.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:36.596Z,1516398816.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:36.610Z,1516398816.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:36.995Z,1516398816.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:37.009Z,1516398817.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:37.402Z,1516398817.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:37.416Z,1516398817.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:37.806Z,1516398817.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:37.820Z,1516398817.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:38.210Z,1516398818.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:38.224Z,1516398818.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:38.597Z,1516398818.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:38.611Z,1516398818.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:38.995Z,1516398818.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:39.015Z,1516398819.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:39.397Z,1516398819.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:39.411Z,1516398819.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:39.797Z,1516398819.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:39.811Z,1516398819.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:40.210Z,1516398820.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:40.224Z,1516398820.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:40.606Z,1516398820.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:40.620Z,1516398820.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:41.002Z,1516398821.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:41.017Z,1516398821.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:41.395Z,1516398821.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:41.410Z,1516398821.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:41.792Z,1516398821.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:41.810Z,1516398821.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:42.199Z,1516398822.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:42.219Z,1516398822.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:42.599Z,1516398822.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:42.619Z,1516398822.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:42.000Z,1516398823.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:43.014Z,1516398823.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:43.402Z,1516398823.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:43.417Z,1516398823.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:43.802Z,1516398823.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:43.816Z,1516398823.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:44.202Z,1516398824.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:44.222Z,1516398824.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:44.599Z,1516398824.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:44.619Z,1516398824.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:44.999Z,1516398824.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:45.014Z,1516398825.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:45.400Z,1516398825.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:45.414Z,1516398825.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:45.799Z,1516398825.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:45.814Z,1516398825.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:46.202Z,1516398826.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:46.216Z,1516398826.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:46.606Z,1516398826.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:46.620Z,1516398826.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:47.002Z,1516398827.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:47.016Z,1516398827.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:47.395Z,1516398827.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:47.410Z,1516398827.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:47.792Z,1516398827.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:47.810Z,1516398827.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:48.199Z,1516398828.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:48.214Z,1516398828.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:48.596Z,1516398828.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:48.610Z,1516398828.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:48.996Z,1516398828.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:49.010Z,1516398829.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:49.402Z,1516398829.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:49.417Z,1516398829.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:49.802Z,1516398829.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:49.816Z,1516398829.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:50.202Z,1516398830.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:50.216Z,1516398830.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:50.600Z,1516398830.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:50.614Z,1516398830.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:50.996Z,1516398830.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:51.010Z,1516398831.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:51.393Z,1516398831.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:51.407Z,1516398831.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:51.800Z,1516398831.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:51.814Z,1516398831.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:52.202Z,1516398832.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:52.241Z,1516398832.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:52.606Z,1516398832.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:52.619Z,1516398832.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:53.006Z,1516398833.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:53.020Z,1516398833.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:53.400Z,1516398833.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:53.414Z,1516398833.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:53.801Z,1516398833.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:53.815Z,1516398833.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:54.200Z,1516398834.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:54.214Z,1516398834.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:54.595Z,1516398834.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:54.614Z,1516398834.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:55.013Z,1516398835.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:55.027Z,1516398835.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:55.406Z,1516398835.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:55.420Z,1516398835.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:55.805Z,1516398835.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:55.819Z,1516398835.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:56.207Z,1516398836.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:56.221Z,1516398836.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:56.595Z,1516398836.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:56.610Z,1516398836.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:57.003Z,1516398837.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:57.018Z,1516398837.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:57.395Z,1516398837.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:57.409Z,1516398837.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:57.794Z,1516398837.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:57.809Z,1516398837.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:58.206Z,1516398838.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:58.220Z,1516398838.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:58.607Z,1516398838.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:58.620Z,1516398838.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:59.006Z,1516398839.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:59.027Z,1516398839.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:59.401Z,1516398839.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:59.415Z,1516398839.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:53:59.802Z,1516398839.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:53:59.816Z,1516398839.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:00.186Z,1516398840.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:00.217Z,1516398840.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:00.597Z,1516398840.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:00.615Z,1516398840.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:00.988Z,1516398840.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:01.028Z,1516398841.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:01.402Z,1516398841.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:01.421Z,1516398841.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:01.810Z,1516398841.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:01.825Z,1516398841.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:02.211Z,1516398842.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:02.229Z,1516398842.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:02.587Z,1516398842.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:02.620Z,1516398842.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:03.003Z,1516398843.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:03.023Z,1516398843.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:03.388Z,1516398843.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:03.414Z,1516398843.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:03.785Z,1516398843.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:03.819Z,1516398843.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:04.210Z,1516398844.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:04.224Z,1516398844.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:04.610Z,1516398844.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:04.631Z,1516398844.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:05.010Z,1516398845.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:05.024Z,1516398845.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:05.387Z,1516398845.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:05.412Z,1516398845.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:05.787Z,1516398845.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:05.813Z,1516398845.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:06.191Z,1516398846.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:06.216Z,1516398846.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:06.588Z,1516398846.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:06.613Z,1516398846.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:06.987Z,1516398846.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:07.022Z,1516398847.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:07.404Z,1516398847.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:07.426Z,1516398847.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:07.814Z,1516398847.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:07.828Z,1516398847.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:08.198Z,1516398848.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:08.224Z,1516398848.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:08.621Z,1516398848.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:08.651Z,1516398848.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:08.990Z,1516398848.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:09.023Z,1516398849.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:09.396Z,1516398849.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:09.422Z,1516398849.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:09.783Z,1516398849.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:09.797Z,1516398849.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:10.198Z,1516398850.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:10.223Z,1516398850.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:10.598Z,1516398850.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:10.631Z,1516398850.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:11.002Z,1516398851.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:11.027Z,1516398851.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:11.395Z,1516398851.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:11.426Z,1516398851.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:11.787Z,1516398851.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:11.801Z,1516398851.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:12.194Z,1516398852.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:12.208Z,1516398852.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:12.227Z,1516398852.227 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T21:54:12.227Z,1516398852.227 [Default:CheckIn:C.Wait] Stopped
2018-01-19T21:54:12.227Z,1516398852.227 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T21:54:12.228Z,1516398852.228 [Default:CheckIn:D] Running Loop=1
2018-01-19T21:54:12.600Z,1516398852.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:12.630Z,1516398852.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:12.642Z,1516398852.642 [Default:CheckIn:D] Stopped
2018-01-19T21:54:12.642Z,1516398852.642 [Default:CheckIn:E] Running Loop=1
2018-01-19T21:54:12.996Z,1516398852.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:13.010Z,1516398853.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:13.013Z,1516398853.013 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.410270 min 
2018-01-19T21:54:13.013Z,1516398853.013 [Default:CheckIn:E] Stopped
2018-01-19T21:54:13.013Z,1516398853.013 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T21:54:13.013Z,1516398853.013 [Default:CheckIn] Stopped
2018-01-19T21:54:13.013Z,1516398853.013 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T21:54:13.014Z,1516398853.014 [Default:CheckIn](INFO): Running loop #5
2018-01-19T21:54:13.014Z,1516398853.014 [Default:CheckIn] Running Loop=5
2018-01-19T21:54:13.014Z,1516398853.014 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T21:54:13.014Z,1516398853.014 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T21:54:16.102Z,1516398856.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:16.117Z,1516398856.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:16.243Z,1516398856.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:16.263Z,1516398856.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:16.610Z,1516398856.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:16.624Z,1516398856.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:16.999Z,1516398856.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:17.014Z,1516398857.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:17.395Z,1516398857.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:17.434Z,1516398857.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:17.791Z,1516398857.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:17.816Z,1516398857.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:18.210Z,1516398858.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:18.224Z,1516398858.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:18.612Z,1516398858.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:18.626Z,1516398858.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:18.996Z,1516398858.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:19.031Z,1516398859.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:19.383Z,1516398859.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:19.418Z,1516398859.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:19.791Z,1516398859.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:19.816Z,1516398859.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:20.183Z,1516398860.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:20.215Z,1516398860.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:20.595Z,1516398860.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:20.613Z,1516398860.613 [PNI_TCM](ERROR): CRC does not match. Expected:0x47827 got:0x7361
2018-01-19T21:54:20.642Z,1516398860.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:20.993Z,1516398860.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:21.018Z,1516398861.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:21.406Z,1516398861.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:21.424Z,1516398861.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:21.808Z,1516398861.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:21.827Z,1516398861.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:22.208Z,1516398862.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:22.226Z,1516398862.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:22.586Z,1516398862.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:22.619Z,1516398862.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:22.991Z,1516398862.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:23.016Z,1516398863.016 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:23.016Z,1516398863.016 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-01-19T21:54:23.016Z,1516398863.016 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:54:23.018Z,1516398863.018 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:23.018Z,1516398863.018 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-01-19T21:54:23.018Z,1516398863.018 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:54:23.020Z,1516398863.020 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:23.020Z,1516398863.020 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-01-19T21:54:23.020Z,1516398863.020 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:54:23.032Z,1516398863.032 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:54:23.032Z,1516398863.032 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:54:23.033Z,1516398863.033 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:54:23.388Z,1516398863.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:23.433Z,1516398863.433 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:54:23.433Z,1516398863.433 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-01-19T21:54:23.434Z,1516398863.434 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:54:23.434Z,1516398863.434 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-01-19T21:54:23.434Z,1516398863.434 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:54:23.434Z,1516398863.434 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-01-19T21:54:23.794Z,1516398863.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:23.801Z,1516398863.801 [PNI_TCM](ERROR): CRC does not match. Expected:0x11362 got:0x55254
2018-01-19T21:54:23.824Z,1516398863.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:54:23.825Z,1516398863.825 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:54:23.825Z,1516398863.825 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:54:23.826Z,1516398863.826 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:54:23.826Z,1516398863.826 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:54:23.827Z,1516398863.827 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:54:23.827Z,1516398863.827 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:54:23.828Z,1516398863.828 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:54:23.828Z,1516398863.828 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:54:24.215Z,1516398864.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:24.228Z,1516398864.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:54:24.229Z,1516398864.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:24.606Z,1516398864.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:24.634Z,1516398864.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:54:24.635Z,1516398864.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:25.017Z,1516398865.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:25.031Z,1516398865.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T21:54:25.031Z,1516398865.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:25.382Z,1516398865.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:25.414Z,1516398865.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T21:54:25.415Z,1516398865.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:25.802Z,1516398865.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:25.815Z,1516398865.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T21:54:25.816Z,1516398865.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:26.198Z,1516398866.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:26.211Z,1516398866.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T21:54:26.212Z,1516398866.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:26.599Z,1516398866.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:26.616Z,1516398866.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T21:54:26.617Z,1516398866.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:26.999Z,1516398866.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:27.013Z,1516398867.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T21:54:27.014Z,1516398867.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:27.410Z,1516398867.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:27.424Z,1516398867.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T21:54:27.448Z,1516398867.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:27.799Z,1516398867.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:27.814Z,1516398867.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:54:27.815Z,1516398867.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:28.198Z,1516398868.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:28.217Z,1516398868.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:54:28.218Z,1516398868.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:28.600Z,1516398868.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:28.613Z,1516398868.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:54:28.614Z,1516398868.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:29.003Z,1516398869.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:29.047Z,1516398869.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:54:29.048Z,1516398869.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:29.402Z,1516398869.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:29.447Z,1516398869.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:54:29.448Z,1516398869.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:29.798Z,1516398869.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:29.850Z,1516398869.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T21:54:29.851Z,1516398869.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:30.211Z,1516398870.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:30.217Z,1516398870.217 [PNI_TCM](ERROR): CRC does not match. Expected:0x31684 got:0x17948
2018-01-19T21:54:30.254Z,1516398870.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T21:54:30.255Z,1516398870.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:30.612Z,1516398870.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:30.626Z,1516398870.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T21:54:30.627Z,1516398870.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:31.010Z,1516398871.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:31.023Z,1516398871.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T21:54:31.024Z,1516398871.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:31.400Z,1516398871.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:31.446Z,1516398871.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T21:54:31.447Z,1516398871.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:31.803Z,1516398871.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:31.811Z,1516398871.811 [PNI_TCM](ERROR): CRC does not match. Expected:0x45543 got:0x7361
2018-01-19T21:54:31.850Z,1516398871.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T21:54:31.851Z,1516398871.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:32.200Z,1516398872.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:32.228Z,1516398872.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T21:54:32.229Z,1516398872.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:32.605Z,1516398872.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:32.619Z,1516398872.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T21:54:32.620Z,1516398872.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:33.001Z,1516398873.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:33.046Z,1516398873.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T21:54:33.047Z,1516398873.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:33.414Z,1516398873.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:33.421Z,1516398873.421 [PNI_TCM](ERROR): CRC does not match. Expected:0x24008 got:0x48557
2018-01-19T21:54:33.458Z,1516398873.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T21:54:33.459Z,1516398873.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:33.801Z,1516398873.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:33.827Z,1516398873.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:54:33.828Z,1516398873.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:34.212Z,1516398874.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:34.226Z,1516398874.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:54:34.227Z,1516398874.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:34.588Z,1516398874.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:34.627Z,1516398874.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:54:34.627Z,1516398874.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:34.998Z,1516398874.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:35.016Z,1516398875.016 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2018-01-19T21:54:35.052Z,1516398875.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:54:35.054Z,1516398875.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:35.400Z,1516398875.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:35.432Z,1516398875.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:54:35.433Z,1516398875.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:35.805Z,1516398875.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:35.819Z,1516398875.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T21:54:35.820Z,1516398875.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:36.211Z,1516398876.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:36.234Z,1516398876.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:54:36.235Z,1516398876.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:36.613Z,1516398876.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:36.627Z,1516398876.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:54:36.628Z,1516398876.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:37.017Z,1516398877.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:37.031Z,1516398877.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:54:37.032Z,1516398877.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:37.407Z,1516398877.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:37.421Z,1516398877.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T21:54:37.422Z,1516398877.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:37.800Z,1516398877.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:37.834Z,1516398877.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T21:54:37.835Z,1516398877.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:38.216Z,1516398878.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:38.230Z,1516398878.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T21:54:38.231Z,1516398878.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:38.610Z,1516398878.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:38.629Z,1516398878.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T21:54:38.630Z,1516398878.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:39.006Z,1516398879.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:39.035Z,1516398879.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T21:54:39.036Z,1516398879.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:39.401Z,1516398879.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:39.429Z,1516398879.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T21:54:39.430Z,1516398879.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:39.781Z,1516398879.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:39.808Z,1516398879.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T21:54:39.816Z,1516398879.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:40.214Z,1516398880.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:40.231Z,1516398880.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T21:54:40.232Z,1516398880.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:40.617Z,1516398880.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:40.632Z,1516398880.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T21:54:40.633Z,1516398880.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:41.010Z,1516398881.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:41.052Z,1516398881.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T21:54:41.053Z,1516398881.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:41.388Z,1516398881.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:41.417Z,1516398881.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T21:54:41.419Z,1516398881.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:41.783Z,1516398881.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:41.820Z,1516398881.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T21:54:41.821Z,1516398881.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:42.200Z,1516398882.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:42.233Z,1516398882.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:54:42.234Z,1516398882.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:42.614Z,1516398882.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:42.652Z,1516398882.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T21:54:42.653Z,1516398882.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:43.004Z,1516398883.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:43.023Z,1516398883.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:43.392Z,1516398883.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:43.422Z,1516398883.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:43.787Z,1516398883.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:43.819Z,1516398883.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:44.211Z,1516398884.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:44.237Z,1516398884.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:44.594Z,1516398884.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:44.624Z,1516398884.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:44.998Z,1516398884.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:45.039Z,1516398885.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:45.397Z,1516398885.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:45.425Z,1516398885.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:45.783Z,1516398885.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:45.819Z,1516398885.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:46.212Z,1516398886.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:46.231Z,1516398886.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:46.616Z,1516398886.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:46.631Z,1516398886.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:47.013Z,1516398887.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:47.027Z,1516398887.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:47.400Z,1516398887.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:47.444Z,1516398887.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:47.795Z,1516398887.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:47.831Z,1516398887.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:48.202Z,1516398888.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:48.235Z,1516398888.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:48.620Z,1516398888.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:48.635Z,1516398888.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:49.011Z,1516398889.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:49.040Z,1516398889.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:49.396Z,1516398889.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:49.427Z,1516398889.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:49.795Z,1516398889.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:49.828Z,1516398889.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:50.212Z,1516398890.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:50.233Z,1516398890.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:50.602Z,1516398890.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:50.646Z,1516398890.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:51.002Z,1516398891.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:51.035Z,1516398891.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:51.393Z,1516398891.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:51.422Z,1516398891.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:51.795Z,1516398891.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:51.835Z,1516398891.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:52.203Z,1516398892.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:52.249Z,1516398892.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:52.616Z,1516398892.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:52.663Z,1516398892.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:53.002Z,1516398893.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:53.043Z,1516398893.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:53.399Z,1516398893.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:53.421Z,1516398893.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:53.796Z,1516398893.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:53.810Z,1516398893.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:54.201Z,1516398894.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:54.215Z,1516398894.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:54.614Z,1516398894.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:54.648Z,1516398894.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:55.002Z,1516398895.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:55.022Z,1516398895.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:55.394Z,1516398895.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:55.408Z,1516398895.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:55.792Z,1516398895.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:55.820Z,1516398895.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:56.202Z,1516398896.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:56.216Z,1516398896.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:56.598Z,1516398896.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:56.627Z,1516398896.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:57.004Z,1516398897.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:57.023Z,1516398897.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:57.401Z,1516398897.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:57.415Z,1516398897.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:57.793Z,1516398897.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:57.807Z,1516398897.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:58.204Z,1516398898.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:58.229Z,1516398898.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:58.606Z,1516398898.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:58.620Z,1516398898.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:59.005Z,1516398899.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:59.019Z,1516398899.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:59.394Z,1516398899.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:59.413Z,1516398899.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:54:59.792Z,1516398899.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:54:59.820Z,1516398899.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:00.210Z,1516398900.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:00.224Z,1516398900.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:00.610Z,1516398900.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:00.624Z,1516398900.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:01.007Z,1516398901.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:01.021Z,1516398901.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:01.385Z,1516398901.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:01.436Z,1516398901.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:01.792Z,1516398901.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:01.817Z,1516398901.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:02.187Z,1516398902.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:02.215Z,1516398902.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:02.602Z,1516398902.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:02.632Z,1516398902.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:03.014Z,1516398903.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:03.033Z,1516398903.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:03.411Z,1516398903.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:03.425Z,1516398903.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:03.783Z,1516398903.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:03.814Z,1516398903.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:04.186Z,1516398904.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:04.211Z,1516398904.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:04.590Z,1516398904.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:04.632Z,1516398904.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:04.987Z,1516398904.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:05.012Z,1516398905.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:05.406Z,1516398905.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:05.420Z,1516398905.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:05.812Z,1516398905.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:05.827Z,1516398905.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:06.210Z,1516398906.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:06.224Z,1516398906.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:06.605Z,1516398906.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:06.620Z,1516398906.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:06.988Z,1516398906.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:07.015Z,1516398907.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:07.387Z,1516398907.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:07.419Z,1516398907.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:07.796Z,1516398907.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:07.821Z,1516398907.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:08.188Z,1516398908.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:08.218Z,1516398908.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:08.610Z,1516398908.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:08.625Z,1516398908.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:09.010Z,1516398909.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:09.027Z,1516398909.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:09.399Z,1516398909.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:09.441Z,1516398909.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:09.795Z,1516398909.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:09.824Z,1516398909.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:10.199Z,1516398910.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:10.221Z,1516398910.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:10.599Z,1516398910.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:10.628Z,1516398910.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:10.994Z,1516398910.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:11.016Z,1516398911.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:11.402Z,1516398911.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:11.428Z,1516398911.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:11.820Z,1516398911.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:11.835Z,1516398911.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:12.198Z,1516398912.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:12.228Z,1516398912.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:12.595Z,1516398912.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:12.631Z,1516398912.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:12.998Z,1516398912.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:13.039Z,1516398913.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:16.090Z,1516398916.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:16.105Z,1516398916.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:16.212Z,1516398916.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:16.247Z,1516398916.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:16.570Z,1516398916.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:16.599Z,1516398916.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:16.985Z,1516398916.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:16.999Z,1516398916.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:17.366Z,1516398917.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:17.397Z,1516398917.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:17.763Z,1516398917.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:17.792Z,1516398917.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:18.159Z,1516398918.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:18.197Z,1516398918.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:18.560Z,1516398918.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:18.591Z,1516398918.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:18.958Z,1516398918.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:18.995Z,1516398918.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:19.370Z,1516398919.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:19.402Z,1516398919.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:19.758Z,1516398919.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:19.772Z,1516398919.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:20.170Z,1516398920.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:20.200Z,1516398920.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:20.557Z,1516398920.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:20.571Z,1516398920.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:20.956Z,1516398920.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:20.971Z,1516398920.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:21.367Z,1516398921.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:21.382Z,1516398921.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:21.762Z,1516398921.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:21.775Z,1516398921.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:22.172Z,1516398922.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:22.187Z,1516398922.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:22.578Z,1516398922.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:22.592Z,1516398922.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:22.979Z,1516398922.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:22.993Z,1516398922.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:23.366Z,1516398923.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:23.388Z,1516398923.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:23.759Z,1516398923.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:23.785Z,1516398923.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:24.148Z,1516398924.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:24.183Z,1516398924.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:24.556Z,1516398924.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:24.582Z,1516398924.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:24.959Z,1516398924.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:24.986Z,1516398924.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:25.372Z,1516398925.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:25.386Z,1516398925.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:25.766Z,1516398925.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:25.788Z,1516398925.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:26.178Z,1516398926.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:26.199Z,1516398926.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:26.555Z,1516398926.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:26.582Z,1516398926.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:26.957Z,1516398926.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:26.986Z,1516398926.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:27.359Z,1516398927.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:27.385Z,1516398927.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:27.748Z,1516398927.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:27.783Z,1516398927.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:28.155Z,1516398928.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:28.181Z,1516398928.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:28.578Z,1516398928.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:28.599Z,1516398928.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:28.979Z,1516398928.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:28.993Z,1516398928.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:29.366Z,1516398929.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:29.388Z,1516398929.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:29.759Z,1516398929.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:29.784Z,1516398929.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:30.160Z,1516398930.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:30.190Z,1516398930.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:30.556Z,1516398930.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:30.582Z,1516398930.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:30.959Z,1516398930.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:30.985Z,1516398930.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:31.377Z,1516398931.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:31.391Z,1516398931.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:31.771Z,1516398931.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:31.785Z,1516398931.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:32.178Z,1516398932.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:32.199Z,1516398932.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:32.573Z,1516398932.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:32.587Z,1516398932.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:32.955Z,1516398932.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:32.981Z,1516398932.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:33.359Z,1516398933.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:33.399Z,1516398933.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:33.757Z,1516398933.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:33.788Z,1516398933.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:34.148Z,1516398934.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:34.183Z,1516398934.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:34.578Z,1516398934.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:34.593Z,1516398934.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:34.983Z,1516398934.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:35.003Z,1516398935.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:35.358Z,1516398935.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:35.380Z,1516398935.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:35.763Z,1516398935.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:35.792Z,1516398935.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:36.160Z,1516398936.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:36.193Z,1516398936.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:36.560Z,1516398936.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:36.594Z,1516398936.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:36.961Z,1516398936.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:36.994Z,1516398936.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:37.370Z,1516398937.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:37.403Z,1516398937.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:37.770Z,1516398937.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:37.802Z,1516398937.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:38.184Z,1516398938.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:38.198Z,1516398938.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:38.559Z,1516398938.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:38.585Z,1516398938.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:38.958Z,1516398938.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:38.999Z,1516398938.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:39.357Z,1516398939.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:39.371Z,1516398939.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:39.758Z,1516398939.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:39.772Z,1516398939.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:40.161Z,1516398940.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:40.199Z,1516398940.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:40.574Z,1516398940.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:40.603Z,1516398940.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:40.970Z,1516398940.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:40.984Z,1516398940.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:41.362Z,1516398941.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:41.376Z,1516398941.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:41.761Z,1516398941.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:41.775Z,1516398941.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:42.162Z,1516398942.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:42.176Z,1516398942.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:42.562Z,1516398942.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:42.577Z,1516398942.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:42.962Z,1516398942.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:42.983Z,1516398942.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:43.374Z,1516398943.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:43.405Z,1516398943.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:43.770Z,1516398943.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:43.785Z,1516398943.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:44.167Z,1516398944.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:44.181Z,1516398944.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:44.569Z,1516398944.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:44.583Z,1516398944.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:44.964Z,1516398944.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:44.983Z,1516398944.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:45.368Z,1516398945.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:45.383Z,1516398945.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:45.770Z,1516398945.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:45.784Z,1516398945.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:46.154Z,1516398946.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:46.174Z,1516398946.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:46.570Z,1516398946.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:46.586Z,1516398946.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:46.971Z,1516398946.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:46.991Z,1516398946.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:47.370Z,1516398947.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:47.384Z,1516398947.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:47.765Z,1516398947.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:47.779Z,1516398947.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:48.166Z,1516398948.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:48.180Z,1516398948.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:48.571Z,1516398948.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:48.585Z,1516398948.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:48.966Z,1516398948.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:48.980Z,1516398948.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:49.371Z,1516398949.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:49.386Z,1516398949.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:49.772Z,1516398949.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:49.787Z,1516398949.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:50.172Z,1516398950.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:50.186Z,1516398950.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:50.566Z,1516398950.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:50.581Z,1516398950.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:50.968Z,1516398950.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:50.987Z,1516398950.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:51.369Z,1516398951.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:51.383Z,1516398951.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:51.758Z,1516398951.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:51.781Z,1516398951.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:52.165Z,1516398952.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:52.180Z,1516398952.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:52.579Z,1516398952.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:52.599Z,1516398952.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:52.979Z,1516398952.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:52.993Z,1516398952.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:53.369Z,1516398953.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:53.392Z,1516398953.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:53.769Z,1516398953.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:53.783Z,1516398953.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:54.148Z,1516398954.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:54.183Z,1516398954.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:54.552Z,1516398954.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:54.584Z,1516398954.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:54.955Z,1516398954.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:54.987Z,1516398954.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:55.376Z,1516398955.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:55.390Z,1516398955.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:55.768Z,1516398955.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:55.791Z,1516398955.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:56.182Z,1516398956.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:56.203Z,1516398956.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:56.555Z,1516398956.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:56.582Z,1516398956.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:56.955Z,1516398956.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:56.981Z,1516398956.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:57.359Z,1516398957.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:57.385Z,1516398957.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:57.748Z,1516398957.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:57.782Z,1516398957.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:58.155Z,1516398958.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:58.186Z,1516398958.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:58.575Z,1516398958.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:58.589Z,1516398958.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:58.962Z,1516398958.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:58.995Z,1516398958.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:59.375Z,1516398959.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:59.389Z,1516398959.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:55:59.755Z,1516398959.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:55:59.787Z,1516398959.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:00.148Z,1516398960.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:00.191Z,1516398960.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:00.556Z,1516398960.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:00.587Z,1516398960.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:00.984Z,1516398960.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:00.998Z,1516398960.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:01.362Z,1516398961.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:01.396Z,1516398961.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:01.778Z,1516398961.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:01.793Z,1516398961.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:02.179Z,1516398962.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:02.193Z,1516398962.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:02.551Z,1516398962.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:02.585Z,1516398962.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:02.955Z,1516398962.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:02.991Z,1516398962.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:03.355Z,1516398963.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:03.391Z,1516398963.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:03.760Z,1516398963.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:03.792Z,1516398963.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:04.155Z,1516398964.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:04.190Z,1516398964.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:04.578Z,1516398964.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:04.599Z,1516398964.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:04.983Z,1516398964.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:04.997Z,1516398964.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:05.366Z,1516398965.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:05.392Z,1516398965.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:05.759Z,1516398965.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:05.790Z,1516398965.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:06.148Z,1516398966.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:06.166Z,1516398966.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:06.556Z,1516398966.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:06.571Z,1516398966.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:06.958Z,1516398966.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:06.999Z,1516398966.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:07.370Z,1516398967.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:07.394Z,1516398967.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:07.784Z,1516398967.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:07.803Z,1516398967.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:08.170Z,1516398968.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:08.193Z,1516398968.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:08.555Z,1516398968.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:08.569Z,1516398968.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:08.950Z,1516398968.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:08.964Z,1516398968.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:09.359Z,1516398969.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:09.395Z,1516398969.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:09.760Z,1516398969.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:09.774Z,1516398969.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:10.157Z,1516398970.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:10.171Z,1516398970.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:10.574Z,1516398970.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:10.595Z,1516398970.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:10.962Z,1516398970.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:10.976Z,1516398970.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:11.370Z,1516398971.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:11.398Z,1516398971.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:11.761Z,1516398971.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:11.775Z,1516398971.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:12.157Z,1516398972.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:12.170Z,1516398972.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:12.562Z,1516398972.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:12.576Z,1516398972.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:12.958Z,1516398972.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:12.973Z,1516398972.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:13.374Z,1516398973.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:13.396Z,1516398973.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:16.470Z,1516398976.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:16.502Z,1516398976.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:16.602Z,1516398976.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:16.647Z,1516398976.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:16.958Z,1516398976.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:16.972Z,1516398976.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:17.363Z,1516398977.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:17.377Z,1516398977.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:17.762Z,1516398977.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:17.776Z,1516398977.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:18.157Z,1516398978.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:18.170Z,1516398978.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:18.562Z,1516398978.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:18.576Z,1516398978.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:18.974Z,1516398978.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:19.004Z,1516398979.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:19.374Z,1516398979.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:19.403Z,1516398979.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:19.761Z,1516398979.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:19.775Z,1516398979.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:20.157Z,1516398980.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:20.172Z,1516398980.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:20.557Z,1516398980.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:20.571Z,1516398980.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:20.958Z,1516398980.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:20.972Z,1516398980.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:21.358Z,1516398981.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:21.373Z,1516398981.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:21.774Z,1516398981.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:21.805Z,1516398981.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:22.171Z,1516398982.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:22.204Z,1516398982.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:22.562Z,1516398982.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:22.576Z,1516398982.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:22.962Z,1516398982.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:22.976Z,1516398982.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:23.362Z,1516398983.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:23.383Z,1516398983.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:23.774Z,1516398983.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:23.788Z,1516398983.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:24.167Z,1516398984.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:24.182Z,1516398984.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:24.566Z,1516398984.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:24.581Z,1516398984.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:24.965Z,1516398984.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:24.979Z,1516398984.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:25.402Z,1516398985.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:25.428Z,1516398985.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:25.768Z,1516398985.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:25.783Z,1516398985.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:26.178Z,1516398986.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:26.215Z,1516398986.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:26.592Z,1516398986.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:26.625Z,1516398986.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:26.952Z,1516398986.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:26.980Z,1516398986.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:27.362Z,1516398987.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:27.384Z,1516398987.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:27.782Z,1516398987.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:27.799Z,1516398987.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:28.176Z,1516398988.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:28.190Z,1516398988.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:28.556Z,1516398988.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:28.583Z,1516398988.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:28.971Z,1516398988.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:28.984Z,1516398988.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:29.367Z,1516398989.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:29.398Z,1516398989.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:29.785Z,1516398989.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:29.800Z,1516398989.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:30.180Z,1516398990.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:30.199Z,1516398990.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:30.553Z,1516398990.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:30.584Z,1516398990.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:30.956Z,1516398990.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:30.983Z,1516398990.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:31.383Z,1516398991.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:31.398Z,1516398991.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:31.766Z,1516398991.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:31.798Z,1516398991.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:32.178Z,1516398992.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:32.192Z,1516398992.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:32.564Z,1516398992.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:32.590Z,1516398992.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:32.982Z,1516398992.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:32.997Z,1516398992.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:33.380Z,1516398993.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:33.398Z,1516398993.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:33.784Z,1516398993.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:33.799Z,1516398993.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:34.175Z,1516398994.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:34.195Z,1516398994.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:34.560Z,1516398994.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:34.586Z,1516398994.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:34.959Z,1516398994.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:34.991Z,1516398994.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:35.362Z,1516398995.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:35.399Z,1516398995.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:35.778Z,1516398995.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:35.792Z,1516398995.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:36.178Z,1516398996.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:36.199Z,1516398996.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:36.556Z,1516398996.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:36.591Z,1516398996.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:36.955Z,1516398996.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:36.985Z,1516398996.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:37.366Z,1516398997.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:37.393Z,1516398997.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:37.762Z,1516398997.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:37.792Z,1516398997.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:38.169Z,1516398998.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:38.196Z,1516398998.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:38.557Z,1516398998.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:38.571Z,1516398998.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:38.960Z,1516398998.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:38.974Z,1516398998.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:39.370Z,1516398999.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:39.401Z,1516398999.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:39.778Z,1516398999.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:39.806Z,1516398999.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:40.166Z,1516399000.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:40.180Z,1516399000.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:40.557Z,1516399000.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:40.574Z,1516399000.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:40.963Z,1516399000.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:40.977Z,1516399000.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:41.358Z,1516399001.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:41.373Z,1516399001.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:41.770Z,1516399001.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:41.784Z,1516399001.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:42.188Z,1516399002.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:42.221Z,1516399002.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:42.561Z,1516399002.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:42.575Z,1516399002.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:42.968Z,1516399002.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:42.982Z,1516399002.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:43.374Z,1516399003.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:43.388Z,1516399003.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:43.762Z,1516399003.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:43.776Z,1516399003.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:44.173Z,1516399004.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:44.187Z,1516399004.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:44.564Z,1516399004.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:44.578Z,1516399004.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:44.963Z,1516399004.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:44.983Z,1516399004.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:45.366Z,1516399005.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:45.383Z,1516399005.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:45.777Z,1516399005.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:45.811Z,1516399005.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:46.166Z,1516399006.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:46.181Z,1516399006.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:46.565Z,1516399006.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:46.579Z,1516399006.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:46.965Z,1516399006.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:46.979Z,1516399006.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:47.361Z,1516399007.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:47.380Z,1516399007.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:47.770Z,1516399007.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:47.784Z,1516399007.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:48.170Z,1516399008.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:48.190Z,1516399008.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:48.554Z,1516399008.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:48.572Z,1516399008.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:48.976Z,1516399008.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:48.990Z,1516399008.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:49.364Z,1516399009.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:49.379Z,1516399009.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:49.769Z,1516399009.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:49.784Z,1516399009.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:50.173Z,1516399010.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:50.187Z,1516399010.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:50.574Z,1516399010.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:50.594Z,1516399010.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:50.957Z,1516399010.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:50.978Z,1516399010.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:51.367Z,1516399011.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:51.387Z,1516399011.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:51.765Z,1516399011.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:51.780Z,1516399011.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:52.163Z,1516399012.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:52.183Z,1516399012.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:52.574Z,1516399012.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:52.588Z,1516399012.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:52.974Z,1516399012.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:52.995Z,1516399012.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:53.374Z,1516399013.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:53.388Z,1516399013.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:53.767Z,1516399013.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:53.787Z,1516399013.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:54.164Z,1516399014.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:54.183Z,1516399014.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:54.557Z,1516399014.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:54.578Z,1516399014.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:54.976Z,1516399014.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:55.012Z,1516399015.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:55.368Z,1516399015.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:55.387Z,1516399015.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:55.770Z,1516399015.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:55.784Z,1516399015.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:56.173Z,1516399016.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:56.188Z,1516399016.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:56.575Z,1516399016.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:56.595Z,1516399016.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:56.964Z,1516399016.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:56.983Z,1516399016.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:57.364Z,1516399017.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:57.383Z,1516399017.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:57.770Z,1516399017.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:57.784Z,1516399017.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:58.169Z,1516399018.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:58.191Z,1516399018.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:58.573Z,1516399018.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:58.587Z,1516399018.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:58.975Z,1516399018.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:58.995Z,1516399018.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:59.373Z,1516399019.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:59.388Z,1516399019.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:56:59.764Z,1516399019.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:56:59.783Z,1516399019.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:00.165Z,1516399020.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:00.180Z,1516399020.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:00.557Z,1516399020.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:00.583Z,1516399020.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:00.974Z,1516399020.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:00.998Z,1516399020.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:01.356Z,1516399021.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:01.387Z,1516399021.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:01.772Z,1516399021.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:01.791Z,1516399021.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:02.179Z,1516399022.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:02.199Z,1516399022.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:02.580Z,1516399022.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:02.594Z,1516399022.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:02.955Z,1516399022.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:02.984Z,1516399022.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:03.353Z,1516399023.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:03.384Z,1516399023.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:03.774Z,1516399023.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:03.789Z,1516399023.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:04.159Z,1516399024.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:04.187Z,1516399024.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:04.575Z,1516399024.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:04.590Z,1516399024.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:04.986Z,1516399024.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:05.007Z,1516399025.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:05.376Z,1516399025.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:05.391Z,1516399025.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:05.756Z,1516399025.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:05.782Z,1516399025.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:06.160Z,1516399026.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:06.187Z,1516399026.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:06.549Z,1516399026.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:06.575Z,1516399026.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:06.956Z,1516399026.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:06.999Z,1516399026.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:07.356Z,1516399027.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:07.392Z,1516399027.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:07.767Z,1516399027.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:07.795Z,1516399027.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:08.184Z,1516399028.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:08.198Z,1516399028.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:08.580Z,1516399028.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:08.599Z,1516399028.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:08.955Z,1516399028.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:08.994Z,1516399028.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:09.355Z,1516399029.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:09.389Z,1516399029.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:09.753Z,1516399029.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:09.767Z,1516399029.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:10.156Z,1516399030.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:10.171Z,1516399030.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:10.574Z,1516399030.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:10.599Z,1516399030.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:10.970Z,1516399030.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:11.000Z,1516399031.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:11.370Z,1516399031.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:11.384Z,1516399031.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:11.762Z,1516399031.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:11.776Z,1516399031.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:12.162Z,1516399032.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:12.176Z,1516399032.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:12.562Z,1516399032.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:12.576Z,1516399032.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:12.966Z,1516399032.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:12.980Z,1516399032.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:13.366Z,1516399033.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:13.387Z,1516399033.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:16.640Z,1516399036.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:16.664Z,1516399036.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:16.779Z,1516399036.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:16.811Z,1516399036.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:17.127Z,1516399037.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:17.141Z,1516399037.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:17.524Z,1516399037.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:17.542Z,1516399037.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:17.920Z,1516399037.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:17.935Z,1516399037.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:18.320Z,1516399038.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:18.335Z,1516399038.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:18.727Z,1516399038.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:18.742Z,1516399038.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:19.126Z,1516399039.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:19.141Z,1516399039.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:19.538Z,1516399039.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:19.571Z,1516399039.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:19.924Z,1516399039.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:19.943Z,1516399039.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:20.323Z,1516399040.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:20.337Z,1516399040.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:20.719Z,1516399040.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:20.746Z,1516399040.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:21.124Z,1516399041.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:21.143Z,1516399041.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:21.529Z,1516399041.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:21.544Z,1516399041.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:21.931Z,1516399041.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:21.946Z,1516399041.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:22.330Z,1516399042.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:22.344Z,1516399042.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:22.723Z,1516399042.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:22.741Z,1516399042.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:23.127Z,1516399043.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:23.144Z,1516399043.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:23.524Z,1516399043.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:23.538Z,1516399043.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:23.920Z,1516399043.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:23.935Z,1516399043.935 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:23.935Z,1516399043.935 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-01-19T21:57:23.935Z,1516399043.935 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T21:57:23.937Z,1516399043.937 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:23.937Z,1516399043.937 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-01-19T21:57:23.937Z,1516399043.937 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T21:57:23.944Z,1516399043.944 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:23.944Z,1516399043.944 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-01-19T21:57:23.948Z,1516399043.948 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T21:57:23.983Z,1516399043.983 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T21:57:23.984Z,1516399043.984 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T21:57:23.984Z,1516399043.984 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T21:57:24.330Z,1516399044.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:24.356Z,1516399044.356 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T21:57:24.356Z,1516399044.356 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-01-19T21:57:24.356Z,1516399044.356 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T21:57:24.356Z,1516399044.356 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-01-19T21:57:24.357Z,1516399044.357 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T21:57:24.357Z,1516399044.357 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-01-19T21:57:24.719Z,1516399044.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:24.754Z,1516399044.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T21:57:24.755Z,1516399044.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:57:24.755Z,1516399044.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:57:24.756Z,1516399044.756 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T21:57:24.756Z,1516399044.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:57:24.756Z,1516399044.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:57:24.757Z,1516399044.757 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T21:57:24.757Z,1516399044.757 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T21:57:24.758Z,1516399044.758 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T21:57:25.136Z,1516399045.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:25.159Z,1516399045.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T21:57:25.160Z,1516399045.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:25.522Z,1516399045.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:25.554Z,1516399045.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T21:57:25.555Z,1516399045.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:25.908Z,1516399045.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:25.926Z,1516399045.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T21:57:25.927Z,1516399045.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:26.316Z,1516399046.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:26.330Z,1516399046.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T21:57:26.331Z,1516399046.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:26.721Z,1516399046.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:26.735Z,1516399046.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T21:57:26.736Z,1516399046.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:27.120Z,1516399047.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:27.138Z,1516399047.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T21:57:27.139Z,1516399047.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:27.535Z,1516399047.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:27.563Z,1516399047.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T21:57:27.564Z,1516399047.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:27.931Z,1516399047.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:27.957Z,1516399047.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T21:57:27.958Z,1516399047.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:28.334Z,1516399048.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:28.367Z,1516399048.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T21:57:28.368Z,1516399048.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:28.713Z,1516399048.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:28.732Z,1516399048.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T21:57:28.733Z,1516399048.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:29.120Z,1516399049.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:29.139Z,1516399049.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T21:57:29.140Z,1516399049.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:29.520Z,1516399049.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:29.535Z,1516399049.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T21:57:29.535Z,1516399049.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:29.915Z,1516399049.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:29.930Z,1516399049.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T21:57:29.930Z,1516399049.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:30.317Z,1516399050.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:30.347Z,1516399050.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T21:57:30.348Z,1516399050.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:30.729Z,1516399050.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:30.743Z,1516399050.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T21:57:30.744Z,1516399050.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:31.128Z,1516399051.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:31.142Z,1516399051.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T21:57:31.143Z,1516399051.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:31.530Z,1516399051.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:31.543Z,1516399051.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T21:57:31.544Z,1516399051.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:31.910Z,1516399051.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:31.933Z,1516399051.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T21:57:31.934Z,1516399051.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:32.318Z,1516399052.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:32.332Z,1516399052.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T21:57:32.334Z,1516399052.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:32.715Z,1516399052.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:32.738Z,1516399052.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T21:57:32.738Z,1516399052.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:33.110Z,1516399053.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:33.133Z,1516399053.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T21:57:33.134Z,1516399053.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:33.529Z,1516399053.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:33.543Z,1516399053.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T21:57:33.544Z,1516399053.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:33.930Z,1516399053.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:33.944Z,1516399053.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T21:57:33.945Z,1516399053.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:34.326Z,1516399054.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:34.340Z,1516399054.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T21:57:34.340Z,1516399054.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:34.714Z,1516399054.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:34.732Z,1516399054.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T21:57:34.733Z,1516399054.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:35.120Z,1516399055.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:35.138Z,1516399055.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T21:57:35.139Z,1516399055.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:35.510Z,1516399055.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:35.536Z,1516399055.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T21:57:35.541Z,1516399055.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:35.923Z,1516399055.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:35.937Z,1516399055.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T21:57:35.938Z,1516399055.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:36.325Z,1516399056.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:36.339Z,1516399056.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T21:57:36.340Z,1516399056.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:36.725Z,1516399056.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:36.746Z,1516399056.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T21:57:36.747Z,1516399056.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:37.136Z,1516399057.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:37.150Z,1516399057.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T21:57:37.151Z,1516399057.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:37.538Z,1516399057.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:37.551Z,1516399057.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T21:57:37.552Z,1516399057.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:37.923Z,1516399057.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:37.941Z,1516399057.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T21:57:37.942Z,1516399057.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:38.307Z,1516399058.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:38.332Z,1516399058.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T21:57:38.333Z,1516399058.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:38.712Z,1516399058.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:38.743Z,1516399058.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T21:57:38.744Z,1516399058.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:39.107Z,1516399059.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:39.142Z,1516399059.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T21:57:39.143Z,1516399059.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:39.534Z,1516399059.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:39.548Z,1516399059.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T21:57:39.549Z,1516399059.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:39.935Z,1516399059.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:39.949Z,1516399059.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T21:57:39.950Z,1516399059.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:40.326Z,1516399060.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:40.340Z,1516399060.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T21:57:40.341Z,1516399060.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:40.707Z,1516399060.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:40.733Z,1516399060.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T21:57:40.734Z,1516399060.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:41.115Z,1516399061.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:41.141Z,1516399061.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T21:57:41.142Z,1516399061.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:41.507Z,1516399061.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:41.543Z,1516399061.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T21:57:41.543Z,1516399061.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:41.908Z,1516399061.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:41.934Z,1516399061.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T21:57:41.935Z,1516399061.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:42.311Z,1516399062.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:42.347Z,1516399062.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T21:57:42.348Z,1516399062.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:42.718Z,1516399062.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:42.744Z,1516399062.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T21:57:42.745Z,1516399062.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:43.122Z,1516399063.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:43.154Z,1516399063.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T21:57:43.155Z,1516399063.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:43.535Z,1516399063.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:43.549Z,1516399063.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T21:57:43.550Z,1516399063.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:43.908Z,1516399063.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:43.943Z,1516399063.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:44.315Z,1516399064.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:44.345Z,1516399064.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:44.716Z,1516399064.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:44.731Z,1516399064.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:45.119Z,1516399065.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:45.155Z,1516399065.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:45.530Z,1516399065.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:45.565Z,1516399065.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:45.930Z,1516399065.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:45.961Z,1516399065.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:46.334Z,1516399066.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:46.367Z,1516399066.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:46.722Z,1516399066.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:46.736Z,1516399066.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:47.120Z,1516399067.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:47.134Z,1516399067.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:47.515Z,1516399067.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:47.529Z,1516399067.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:47.919Z,1516399067.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:47.934Z,1516399067.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:48.320Z,1516399068.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:48.334Z,1516399068.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:48.723Z,1516399068.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:48.741Z,1516399068.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:49.130Z,1516399069.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:49.144Z,1516399069.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:49.530Z,1516399069.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:49.544Z,1516399069.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:49.923Z,1516399069.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:49.943Z,1516399069.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:50.323Z,1516399070.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:50.337Z,1516399070.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:50.721Z,1516399070.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:50.735Z,1516399070.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:51.107Z,1516399071.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:51.139Z,1516399071.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:51.533Z,1516399071.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:51.547Z,1516399071.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:51.934Z,1516399071.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:51.955Z,1516399071.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:52.334Z,1516399072.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:52.355Z,1516399072.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:52.722Z,1516399072.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:52.736Z,1516399072.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:53.132Z,1516399073.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:53.151Z,1516399073.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:53.523Z,1516399073.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:53.543Z,1516399073.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:53.924Z,1516399073.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:53.939Z,1516399073.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:54.318Z,1516399074.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:54.339Z,1516399074.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:54.734Z,1516399074.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:54.755Z,1516399074.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:55.133Z,1516399075.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:55.147Z,1516399075.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:55.531Z,1516399075.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:55.546Z,1516399075.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:55.922Z,1516399075.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:55.944Z,1516399075.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:56.325Z,1516399076.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:56.339Z,1516399076.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:56.718Z,1516399076.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:56.740Z,1516399076.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:57.107Z,1516399077.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:57.141Z,1516399077.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:57.530Z,1516399077.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:57.545Z,1516399077.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:57.934Z,1516399077.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:57.955Z,1516399077.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:58.334Z,1516399078.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:58.355Z,1516399078.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:58.725Z,1516399078.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:58.740Z,1516399078.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:59.131Z,1516399079.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:59.145Z,1516399079.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:59.512Z,1516399079.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:59.548Z,1516399079.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:57:59.925Z,1516399079.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:57:59.939Z,1516399079.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:00.312Z,1516399080.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:00.339Z,1516399080.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:00.727Z,1516399080.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:00.743Z,1516399080.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:01.130Z,1516399081.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:01.151Z,1516399081.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:01.530Z,1516399081.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:01.549Z,1516399081.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:01.912Z,1516399081.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:01.948Z,1516399081.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:02.324Z,1516399082.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:02.339Z,1516399082.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:02.712Z,1516399082.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:02.739Z,1516399082.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:03.107Z,1516399083.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:03.144Z,1516399083.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:03.526Z,1516399083.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:03.541Z,1516399083.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:03.935Z,1516399083.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:03.954Z,1516399083.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:04.334Z,1516399084.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:04.355Z,1516399084.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:04.722Z,1516399084.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:04.736Z,1516399084.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:05.111Z,1516399085.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:05.146Z,1516399085.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:05.534Z,1516399085.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:05.551Z,1516399085.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:05.936Z,1516399085.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:05.952Z,1516399085.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:06.330Z,1516399086.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:06.350Z,1516399086.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:06.724Z,1516399086.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:06.739Z,1516399086.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:07.107Z,1516399087.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:07.138Z,1516399087.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:07.530Z,1516399087.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:07.544Z,1516399087.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:07.936Z,1516399087.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:07.959Z,1516399087.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:08.333Z,1516399088.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:08.348Z,1516399088.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:08.712Z,1516399088.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:08.737Z,1516399088.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:09.115Z,1516399089.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:09.141Z,1516399089.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:09.526Z,1516399089.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:09.541Z,1516399089.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:09.934Z,1516399089.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:09.964Z,1516399089.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:10.334Z,1516399090.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:10.355Z,1516399090.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:10.715Z,1516399090.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:10.741Z,1516399090.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:11.115Z,1516399091.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:11.143Z,1516399091.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:11.534Z,1516399091.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:11.555Z,1516399091.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:11.938Z,1516399091.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:11.953Z,1516399091.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:12.330Z,1516399092.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:12.350Z,1516399092.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:12.716Z,1516399092.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:12.743Z,1516399092.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:13.107Z,1516399093.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:13.138Z,1516399093.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:13.534Z,1516399093.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:13.548Z,1516399093.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:16.646Z,1516399096.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:16.661Z,1516399096.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:16.784Z,1516399096.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:16.818Z,1516399096.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:17.138Z,1516399097.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:17.152Z,1516399097.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:17.536Z,1516399097.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:17.550Z,1516399097.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:17.930Z,1516399097.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:17.950Z,1516399097.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:18.330Z,1516399098.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:18.352Z,1516399098.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:18.745Z,1516399098.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:18.766Z,1516399098.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:19.145Z,1516399099.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:19.159Z,1516399099.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:19.544Z,1516399099.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:19.563Z,1516399099.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:19.936Z,1516399099.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:19.958Z,1516399099.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:20.334Z,1516399100.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:20.354Z,1516399100.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:20.734Z,1516399100.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:20.761Z,1516399100.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:21.141Z,1516399101.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:21.155Z,1516399101.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:21.543Z,1516399101.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:21.565Z,1516399101.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:21.950Z,1516399101.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:21.965Z,1516399101.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:22.347Z,1516399102.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:22.366Z,1516399102.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:22.732Z,1516399102.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:22.758Z,1516399102.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:23.127Z,1516399103.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:23.152Z,1516399103.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:23.547Z,1516399103.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:23.561Z,1516399103.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:23.938Z,1516399103.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:23.965Z,1516399103.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:24.346Z,1516399104.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:24.360Z,1516399104.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:24.728Z,1516399104.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:24.761Z,1516399104.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:25.131Z,1516399105.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:25.156Z,1516399105.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:25.546Z,1516399105.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:25.560Z,1516399105.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:25.951Z,1516399105.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:25.966Z,1516399105.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:26.345Z,1516399106.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:26.366Z,1516399106.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:26.732Z,1516399106.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:26.757Z,1516399106.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:27.127Z,1516399107.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:27.159Z,1516399107.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:27.542Z,1516399107.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:27.556Z,1516399107.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:27.950Z,1516399107.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:27.964Z,1516399107.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:28.347Z,1516399108.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:28.361Z,1516399108.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:28.724Z,1516399108.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:28.751Z,1516399108.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:29.131Z,1516399109.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:29.157Z,1516399109.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:29.546Z,1516399109.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:29.565Z,1516399109.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:29.947Z,1516399109.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:29.979Z,1516399109.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:30.350Z,1516399110.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:30.364Z,1516399110.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:30.736Z,1516399110.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:30.763Z,1516399110.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:31.123Z,1516399111.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:31.159Z,1516399111.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:31.546Z,1516399111.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:31.560Z,1516399111.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:31.948Z,1516399111.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:31.969Z,1516399111.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:32.350Z,1516399112.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:32.365Z,1516399112.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:32.728Z,1516399112.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:32.758Z,1516399112.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:33.127Z,1516399113.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:33.164Z,1516399113.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:33.534Z,1516399113.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:33.560Z,1516399113.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:33.958Z,1516399113.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:33.979Z,1516399113.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:34.356Z,1516399114.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:34.370Z,1516399114.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:34.729Z,1516399114.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:34.766Z,1516399114.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:35.127Z,1516399115.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:35.159Z,1516399115.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:35.543Z,1516399115.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:35.589Z,1516399115.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:35.955Z,1516399115.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:35.975Z,1516399115.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:36.339Z,1516399116.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:36.375Z,1516399116.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:36.734Z,1516399116.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:36.766Z,1516399116.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:37.133Z,1516399117.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:37.160Z,1516399117.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:37.542Z,1516399117.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:37.569Z,1516399117.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:37.946Z,1516399117.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:37.975Z,1516399117.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:38.338Z,1516399118.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:38.372Z,1516399118.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:38.737Z,1516399118.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:38.767Z,1516399118.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:39.133Z,1516399119.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:39.171Z,1516399119.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:39.550Z,1516399119.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:39.575Z,1516399119.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:39.947Z,1516399119.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:39.978Z,1516399119.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:40.345Z,1516399120.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:40.389Z,1516399120.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:40.736Z,1516399120.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:40.751Z,1516399120.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:41.138Z,1516399121.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:41.193Z,1516399121.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:41.554Z,1516399121.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:41.580Z,1516399121.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:41.957Z,1516399121.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:41.979Z,1516399121.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:42.341Z,1516399122.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:42.371Z,1516399122.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:42.735Z,1516399122.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:42.750Z,1516399122.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:43.134Z,1516399123.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:43.206Z,1516399123.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:43.547Z,1516399123.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:43.567Z,1516399123.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:43.953Z,1516399123.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:43.980Z,1516399123.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:44.348Z,1516399124.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:44.376Z,1516399124.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:44.729Z,1516399124.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:44.766Z,1516399124.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:45.130Z,1516399125.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:45.191Z,1516399125.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:45.529Z,1516399125.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:45.584Z,1516399125.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:45.948Z,1516399125.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:46.017Z,1516399126.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:46.348Z,1516399126.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:46.395Z,1516399126.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:46.747Z,1516399126.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:46.802Z,1516399126.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:47.137Z,1516399127.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:47.156Z,1516399127.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:47.529Z,1516399127.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:47.574Z,1516399127.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:47.930Z,1516399127.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:47.971Z,1516399127.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:48.360Z,1516399128.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:48.391Z,1516399128.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:48.760Z,1516399128.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:48.824Z,1516399128.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:49.142Z,1516399129.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:49.156Z,1516399129.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:49.542Z,1516399129.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:49.556Z,1516399129.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:49.927Z,1516399129.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:49.942Z,1516399129.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:50.331Z,1516399130.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:50.360Z,1516399130.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:50.729Z,1516399130.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:50.743Z,1516399130.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:51.132Z,1516399131.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:51.146Z,1516399131.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:51.531Z,1516399131.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:51.547Z,1516399131.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:51.942Z,1516399131.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:51.957Z,1516399131.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:52.338Z,1516399132.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:52.371Z,1516399132.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:52.742Z,1516399132.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:52.756Z,1516399132.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:53.136Z,1516399133.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:53.155Z,1516399133.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:53.532Z,1516399133.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:53.546Z,1516399133.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:53.933Z,1516399133.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:53.948Z,1516399133.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:54.336Z,1516399134.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:54.351Z,1516399134.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:54.750Z,1516399134.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:54.780Z,1516399134.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:55.138Z,1516399135.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:55.152Z,1516399135.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:55.546Z,1516399135.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:55.560Z,1516399135.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:55.936Z,1516399135.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:55.950Z,1516399135.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:56.336Z,1516399136.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:56.351Z,1516399136.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:56.733Z,1516399136.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:56.751Z,1516399136.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:57.140Z,1516399137.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:57.155Z,1516399137.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:57.539Z,1516399137.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:57.559Z,1516399137.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:57.945Z,1516399137.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:57.960Z,1516399137.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:58.346Z,1516399138.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:58.360Z,1516399138.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:58.744Z,1516399138.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:58.759Z,1516399138.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:59.139Z,1516399139.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:59.171Z,1516399139.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:59.527Z,1516399139.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:59.565Z,1516399139.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:58:59.932Z,1516399139.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:58:59.963Z,1516399139.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:00.330Z,1516399140.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:00.371Z,1516399140.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:00.741Z,1516399140.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:00.776Z,1516399140.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:01.142Z,1516399141.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:01.172Z,1516399141.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:01.546Z,1516399141.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:01.576Z,1516399141.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:01.935Z,1516399141.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:01.950Z,1516399141.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:02.332Z,1516399142.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:02.347Z,1516399142.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:02.735Z,1516399142.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:02.755Z,1516399142.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:03.137Z,1516399143.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:03.151Z,1516399143.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:03.536Z,1516399143.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:03.555Z,1516399143.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:03.946Z,1516399143.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:03.977Z,1516399143.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:04.338Z,1516399144.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:04.359Z,1516399144.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:04.746Z,1516399144.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:04.760Z,1516399144.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:05.136Z,1516399145.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:05.155Z,1516399145.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:05.536Z,1516399145.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:05.550Z,1516399145.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:05.937Z,1516399145.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:05.952Z,1516399145.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:06.333Z,1516399146.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:06.351Z,1516399146.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:06.742Z,1516399146.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:06.756Z,1516399146.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:07.146Z,1516399147.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:07.160Z,1516399147.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:07.542Z,1516399147.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:07.557Z,1516399147.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:07.928Z,1516399147.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:07.954Z,1516399147.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:08.342Z,1516399148.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:08.357Z,1516399148.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:08.735Z,1516399148.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:08.750Z,1516399148.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:09.141Z,1516399149.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:09.155Z,1516399149.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:09.540Z,1516399149.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:09.554Z,1516399149.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:09.940Z,1516399149.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:09.959Z,1516399149.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:10.349Z,1516399150.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:10.364Z,1516399150.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:10.404Z,1516399150.404 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T21:59:10.750Z,1516399150.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:10.767Z,1516399150.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:11.139Z,1516399151.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:11.154Z,1516399151.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:11.523Z,1516399151.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:11.556Z,1516399151.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:11.941Z,1516399151.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:11.955Z,1516399151.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:12.340Z,1516399152.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:12.357Z,1516399152.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:12.743Z,1516399152.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:12.758Z,1516399152.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:13.149Z,1516399153.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:13.163Z,1516399153.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:13.167Z,1516399153.167 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T21:54:13.0Z
2018-01-19T21:59:13.167Z,1516399153.167 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T21:59:13.167Z,1516399153.167 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T21:59:13.546Z,1516399153.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:13.560Z,1516399153.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:16.775Z,1516399156.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:16.799Z,1516399156.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:16.886Z,1516399156.886 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0020.lzma
2018-01-19T21:59:16.912Z,1516399156.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:16.959Z,1516399156.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:17.274Z,1516399157.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:17.295Z,1516399157.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:17.627Z,1516399157.627 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0020.lzma.bak
2018-01-19T21:59:17.627Z,1516399157.627 [DataOverHttps](INFO): SBD MOMSN=7724295
2018-01-19T21:59:17.685Z,1516399157.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:17.699Z,1516399157.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:18.154Z,1516399158.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:18.168Z,1516399158.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:18.454Z,1516399158.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:18.472Z,1516399158.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:21.555Z,1516399161.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:21.570Z,1516399161.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:21.678Z,1516399161.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:21.712Z,1516399161.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:22.034Z,1516399162.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:22.060Z,1516399162.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:22.451Z,1516399162.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:22.465Z,1516399162.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:22.835Z,1516399162.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:22.861Z,1516399162.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:23.228Z,1516399163.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:23.258Z,1516399163.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:26.321Z,1516399166.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:26.335Z,1516399166.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:26.417Z,1516399166.417 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180119T210901/Express0021.lzma
2018-01-19T21:59:26.443Z,1516399166.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:26.483Z,1516399166.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:26.827Z,1516399166.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:26.855Z,1516399166.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:27.187Z,1516399167.187 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0021.lzma.bak
2018-01-19T21:59:27.187Z,1516399167.187 [DataOverHttps](INFO): SBD MOMSN=7724297
2018-01-19T21:59:27.251Z,1516399167.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:27.265Z,1516399167.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:27.714Z,1516399167.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:27.728Z,1516399167.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:27.732Z,1516399167.732 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T21:59:27.732Z,1516399167.732 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T21:59:27.732Z,1516399167.732 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T21:59:28.018Z,1516399168.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:28.033Z,1516399168.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:31.132Z,1516399171.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:31.160Z,1516399171.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:31.261Z,1516399171.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:31.306Z,1516399171.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:31.618Z,1516399171.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:31.632Z,1516399171.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:32.030Z,1516399172.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:32.064Z,1516399172.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:32.418Z,1516399172.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:32.433Z,1516399172.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:32.817Z,1516399172.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:32.831Z,1516399172.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:33.212Z,1516399173.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:33.226Z,1516399173.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:33.616Z,1516399173.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:33.635Z,1516399173.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:34.022Z,1516399174.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:34.036Z,1516399174.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:34.422Z,1516399174.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:34.442Z,1516399174.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:34.804Z,1516399174.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:34.826Z,1516399174.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:35.214Z,1516399175.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:35.232Z,1516399175.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:35.620Z,1516399175.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:35.633Z,1516399175.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:36.022Z,1516399176.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:36.037Z,1516399176.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:36.422Z,1516399176.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:36.436Z,1516399176.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:36.822Z,1516399176.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:36.842Z,1516399176.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:37.219Z,1516399177.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:37.239Z,1516399177.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:37.619Z,1516399177.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:37.633Z,1516399177.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:38.012Z,1516399178.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:38.026Z,1516399178.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:38.406Z,1516399178.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:38.426Z,1516399178.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:38.820Z,1516399178.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:38.839Z,1516399178.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:39.226Z,1516399179.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:39.240Z,1516399179.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:39.621Z,1516399179.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:39.635Z,1516399179.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:40.014Z,1516399180.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:40.029Z,1516399180.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:40.419Z,1516399180.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:40.433Z,1516399180.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:40.806Z,1516399180.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:40.827Z,1516399180.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:41.219Z,1516399181.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:41.233Z,1516399181.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:41.619Z,1516399181.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:41.632Z,1516399181.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:42.022Z,1516399182.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:42.037Z,1516399182.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:42.426Z,1516399182.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:42.440Z,1516399182.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:42.822Z,1516399182.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:42.836Z,1516399182.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:43.219Z,1516399183.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:43.234Z,1516399183.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:43.615Z,1516399183.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:43.629Z,1516399183.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:44.019Z,1516399184.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:44.033Z,1516399184.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:44.406Z,1516399184.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:44.426Z,1516399184.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:44.820Z,1516399184.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:44.838Z,1516399184.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:45.222Z,1516399185.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:45.236Z,1516399185.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:45.619Z,1516399185.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:45.638Z,1516399185.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:46.015Z,1516399186.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:46.035Z,1516399186.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:46.419Z,1516399186.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:46.433Z,1516399186.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:46.806Z,1516399186.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:46.826Z,1516399186.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:47.211Z,1516399187.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:47.241Z,1516399187.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:47.617Z,1516399187.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:47.631Z,1516399187.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:48.022Z,1516399188.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:48.037Z,1516399188.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:48.426Z,1516399188.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:48.440Z,1516399188.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:48.822Z,1516399188.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:48.842Z,1516399188.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:49.213Z,1516399189.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:49.227Z,1516399189.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:49.623Z,1516399189.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:49.643Z,1516399189.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:50.020Z,1516399190.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:50.033Z,1516399190.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:50.413Z,1516399190.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:50.427Z,1516399190.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:50.819Z,1516399190.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:50.839Z,1516399190.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:51.226Z,1516399191.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:51.240Z,1516399191.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:51.620Z,1516399191.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:51.639Z,1516399191.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:52.019Z,1516399192.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:52.039Z,1516399192.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:52.410Z,1516399192.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:52.486Z,1516399192.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:52.817Z,1516399192.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:52.832Z,1516399192.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:53.214Z,1516399193.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:53.233Z,1516399193.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:53.603Z,1516399193.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:53.629Z,1516399193.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:54.029Z,1516399194.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:54.043Z,1516399194.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:54.429Z,1516399194.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:54.443Z,1516399194.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:54.820Z,1516399194.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:54.834Z,1516399194.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:55.203Z,1516399195.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:55.239Z,1516399195.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:55.611Z,1516399195.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:55.636Z,1516399195.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:56.004Z,1516399196.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:56.035Z,1516399196.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:56.405Z,1516399196.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:56.438Z,1516399196.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:56.830Z,1516399196.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:56.851Z,1516399196.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:57.241Z,1516399197.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:57.255Z,1516399197.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:57.622Z,1516399197.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:57.637Z,1516399197.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:58.007Z,1516399198.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:58.032Z,1516399198.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:58.404Z,1516399198.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:58.439Z,1516399198.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:58.808Z,1516399198.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:58.834Z,1516399198.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:59.208Z,1516399199.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:59.234Z,1516399199.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T21:59:59.627Z,1516399199.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T21:59:59.641Z,1516399199.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:00.031Z,1516399200.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:00.045Z,1516399200.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:00.430Z,1516399200.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:00.445Z,1516399200.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:00.823Z,1516399200.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:00.842Z,1516399200.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:01.211Z,1516399201.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:01.242Z,1516399201.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:01.607Z,1516399201.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:01.638Z,1516399201.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:02.012Z,1516399202.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:02.038Z,1516399202.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:02.401Z,1516399202.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:02.415Z,1516399202.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:02.818Z,1516399202.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:02.844Z,1516399202.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:03.218Z,1516399203.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:03.247Z,1516399203.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:03.618Z,1516399203.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:03.657Z,1516399203.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:04.011Z,1516399204.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:04.042Z,1516399204.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:04.408Z,1516399204.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:04.446Z,1516399204.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:04.809Z,1516399204.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:04.838Z,1516399204.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:05.214Z,1516399205.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:05.228Z,1516399205.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:05.618Z,1516399205.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:05.632Z,1516399205.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:06.036Z,1516399206.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:06.062Z,1516399206.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:06.427Z,1516399206.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:06.457Z,1516399206.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:06.827Z,1516399206.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:06.858Z,1516399206.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:07.208Z,1516399207.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:07.224Z,1516399207.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:07.615Z,1516399207.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:07.643Z,1516399207.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:08.020Z,1516399208.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:08.035Z,1516399208.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:08.415Z,1516399208.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:08.432Z,1516399208.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:08.819Z,1516399208.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:08.836Z,1516399208.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:09.222Z,1516399209.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:09.240Z,1516399209.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:09.618Z,1516399209.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:09.645Z,1516399209.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:10.019Z,1516399210.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:10.039Z,1516399210.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:10.420Z,1516399210.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:10.434Z,1516399210.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:10.815Z,1516399210.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:10.829Z,1516399210.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:11.214Z,1516399211.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:11.233Z,1516399211.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:11.616Z,1516399211.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:11.630Z,1516399211.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:12.025Z,1516399212.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:12.039Z,1516399212.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:12.426Z,1516399212.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:12.440Z,1516399212.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:12.825Z,1516399212.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:12.839Z,1516399212.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:13.219Z,1516399213.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:13.235Z,1516399213.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:13.615Z,1516399213.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:13.634Z,1516399213.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:14.021Z,1516399214.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:14.034Z,1516399214.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:14.420Z,1516399214.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:14.434Z,1516399214.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:14.825Z,1516399214.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:14.839Z,1516399214.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:15.226Z,1516399215.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:15.240Z,1516399215.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:15.625Z,1516399215.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:15.642Z,1516399215.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:16.014Z,1516399216.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:16.029Z,1516399216.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:16.416Z,1516399216.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:16.434Z,1516399216.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:16.813Z,1516399216.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:16.827Z,1516399216.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:17.212Z,1516399217.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:17.234Z,1516399217.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:17.619Z,1516399217.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:17.633Z,1516399217.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:18.029Z,1516399218.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:18.043Z,1516399218.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:18.429Z,1516399218.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:18.443Z,1516399218.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:18.830Z,1516399218.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:18.850Z,1516399218.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:19.219Z,1516399219.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:19.239Z,1516399219.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:19.619Z,1516399219.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:19.639Z,1516399219.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:20.017Z,1516399220.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:20.031Z,1516399220.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:20.401Z,1516399220.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:20.435Z,1516399220.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:20.829Z,1516399220.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:20.843Z,1516399220.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:21.229Z,1516399221.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:21.243Z,1516399221.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:21.629Z,1516399221.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:21.651Z,1516399221.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:22.019Z,1516399222.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:22.039Z,1516399222.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:22.419Z,1516399222.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:22.434Z,1516399222.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:22.801Z,1516399222.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:22.834Z,1516399222.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:23.220Z,1516399223.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:23.234Z,1516399223.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:23.619Z,1516399223.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:23.633Z,1516399223.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:24.028Z,1516399224.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:24.047Z,1516399224.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:24.429Z,1516399224.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:24.451Z,1516399224.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:24.830Z,1516399224.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:24.850Z,1516399224.850 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:24.850Z,1516399224.850 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-01-19T22:00:24.851Z,1516399224.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:00:24.852Z,1516399224.852 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:24.852Z,1516399224.852 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-01-19T22:00:24.852Z,1516399224.852 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:00:24.874Z,1516399224.874 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:24.875Z,1516399224.875 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-01-19T22:00:24.875Z,1516399224.875 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:00:24.898Z,1516399224.898 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:00:24.899Z,1516399224.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:00:24.899Z,1516399224.899 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:00:25.203Z,1516399225.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:25.244Z,1516399225.244 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:00:25.244Z,1516399225.244 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-01-19T22:00:25.245Z,1516399225.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:00:25.245Z,1516399225.245 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-01-19T22:00:25.246Z,1516399225.246 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:00:25.246Z,1516399225.246 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-01-19T22:00:25.626Z,1516399225.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:25.643Z,1516399225.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:00:25.644Z,1516399225.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:00:25.644Z,1516399225.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:00:25.644Z,1516399225.644 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:00:25.645Z,1516399225.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:00:25.645Z,1516399225.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:00:25.646Z,1516399225.646 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:00:25.646Z,1516399225.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:00:25.646Z,1516399225.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:00:26.009Z,1516399226.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:26.048Z,1516399226.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:00:26.049Z,1516399226.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:26.401Z,1516399226.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:26.415Z,1516399226.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:00:26.416Z,1516399226.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:26.818Z,1516399226.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:26.843Z,1516399226.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:00:26.844Z,1516399226.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:27.231Z,1516399227.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:27.250Z,1516399227.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:00:27.251Z,1516399227.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:27.618Z,1516399227.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:27.654Z,1516399227.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:00:27.655Z,1516399227.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:28.010Z,1516399228.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:28.043Z,1516399228.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:00:28.044Z,1516399228.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:28.416Z,1516399228.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:28.445Z,1516399228.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T22:00:28.446Z,1516399228.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:31.505Z,1516399231.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:31.520Z,1516399231.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-01-19T22:00:31.521Z,1516399231.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:31.627Z,1516399231.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:31.651Z,1516399231.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:00:31.651Z,1516399231.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:32.018Z,1516399232.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:32.048Z,1516399232.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:00:32.053Z,1516399232.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:32.422Z,1516399232.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:32.451Z,1516399232.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:00:32.452Z,1516399232.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:32.809Z,1516399232.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:32.822Z,1516399232.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:00:32.823Z,1516399232.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:33.204Z,1516399233.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:33.222Z,1516399233.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:00:33.223Z,1516399233.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:33.607Z,1516399233.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:33.621Z,1516399233.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:00:33.622Z,1516399233.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:34.007Z,1516399234.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:34.026Z,1516399234.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:00:34.027Z,1516399234.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:34.406Z,1516399234.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:34.426Z,1516399234.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T22:00:34.427Z,1516399234.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:34.810Z,1516399234.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:34.824Z,1516399234.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:00:34.825Z,1516399234.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:35.214Z,1516399235.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:35.228Z,1516399235.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:00:35.229Z,1516399235.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:35.610Z,1516399235.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:35.623Z,1516399235.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:00:35.624Z,1516399235.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:36.008Z,1516399236.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:36.022Z,1516399236.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:00:36.022Z,1516399236.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:36.407Z,1516399236.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:36.421Z,1516399236.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:00:36.422Z,1516399236.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:36.809Z,1516399236.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:36.823Z,1516399236.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T22:00:36.824Z,1516399236.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:37.207Z,1516399237.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:37.226Z,1516399237.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T22:00:37.227Z,1516399237.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:37.598Z,1516399237.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:37.630Z,1516399237.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T22:00:37.631Z,1516399237.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:38.014Z,1516399238.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:38.034Z,1516399238.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T22:00:38.035Z,1516399238.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:38.416Z,1516399238.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:38.431Z,1516399238.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T22:00:38.432Z,1516399238.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:38.817Z,1516399238.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:38.838Z,1516399238.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T22:00:38.839Z,1516399238.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:39.208Z,1516399239.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:39.222Z,1516399239.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T22:00:39.223Z,1516399239.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:39.598Z,1516399239.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:39.620Z,1516399239.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:00:39.621Z,1516399239.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:40.006Z,1516399240.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:40.020Z,1516399240.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:00:40.021Z,1516399240.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:40.413Z,1516399240.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:40.426Z,1516399240.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T22:00:40.427Z,1516399240.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:40.814Z,1516399240.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:40.828Z,1516399240.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T22:00:40.829Z,1516399240.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:41.218Z,1516399241.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:41.238Z,1516399241.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T22:00:41.239Z,1516399241.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:41.620Z,1516399241.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:41.634Z,1516399241.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T22:00:41.635Z,1516399241.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:42.009Z,1516399242.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:42.023Z,1516399242.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T22:00:42.024Z,1516399242.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:42.414Z,1516399242.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:42.428Z,1516399242.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T22:00:42.429Z,1516399242.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:42.805Z,1516399242.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:42.827Z,1516399242.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T22:00:42.828Z,1516399242.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:43.196Z,1516399243.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:43.230Z,1516399243.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T22:00:43.231Z,1516399243.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:43.610Z,1516399243.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:43.624Z,1516399243.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T22:00:43.625Z,1516399243.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:44.013Z,1516399244.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:44.039Z,1516399244.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T22:00:44.040Z,1516399244.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:44.424Z,1516399244.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:44.442Z,1516399244.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T22:00:44.443Z,1516399244.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:44.825Z,1516399244.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:44.839Z,1516399244.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T22:00:44.840Z,1516399244.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:45.199Z,1516399245.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:45.229Z,1516399245.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:45.595Z,1516399245.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:45.622Z,1516399245.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:45.996Z,1516399245.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:46.022Z,1516399246.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:46.398Z,1516399246.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:46.426Z,1516399246.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:46.818Z,1516399246.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:46.834Z,1516399246.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:47.224Z,1516399247.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:47.240Z,1516399247.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:47.615Z,1516399247.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:47.628Z,1516399247.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:47.997Z,1516399247.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:48.031Z,1516399248.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:48.410Z,1516399248.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:48.425Z,1516399248.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:48.795Z,1516399248.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:48.829Z,1516399248.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:49.196Z,1516399249.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:49.221Z,1516399249.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:49.614Z,1516399249.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:49.628Z,1516399249.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:50.018Z,1516399250.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:50.032Z,1516399250.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:50.422Z,1516399250.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:50.436Z,1516399250.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:50.822Z,1516399250.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:50.836Z,1516399250.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:51.198Z,1516399251.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:51.231Z,1516399251.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:51.602Z,1516399251.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:51.635Z,1516399251.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:51.998Z,1516399251.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:52.024Z,1516399252.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:52.395Z,1516399252.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:52.427Z,1516399252.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:52.821Z,1516399252.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:52.835Z,1516399252.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:53.218Z,1516399253.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:53.232Z,1516399253.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:53.617Z,1516399253.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:53.631Z,1516399253.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:53.999Z,1516399253.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:54.024Z,1516399254.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:54.396Z,1516399254.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:54.425Z,1516399254.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:54.798Z,1516399254.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:54.824Z,1516399254.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:55.199Z,1516399255.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:55.224Z,1516399255.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:55.603Z,1516399255.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:55.628Z,1516399255.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:56.014Z,1516399256.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:56.043Z,1516399256.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:56.422Z,1516399256.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:56.436Z,1516399256.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:56.818Z,1516399256.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:56.832Z,1516399256.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:57.196Z,1516399257.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:57.227Z,1516399257.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:57.600Z,1516399257.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:57.629Z,1516399257.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:57.999Z,1516399257.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:58.030Z,1516399258.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:58.398Z,1516399258.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:58.427Z,1516399258.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:58.818Z,1516399258.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:58.839Z,1516399258.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:59.226Z,1516399259.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:59.240Z,1516399259.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:59.621Z,1516399259.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:00:59.635Z,1516399259.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:00:59.998Z,1516399259.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:00.027Z,1516399260.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:00.398Z,1516399260.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:00.423Z,1516399260.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:00.794Z,1516399260.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:00.832Z,1516399260.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:01.203Z,1516399261.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:01.229Z,1516399261.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:01.596Z,1516399261.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:01.626Z,1516399261.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:02.019Z,1516399262.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:02.033Z,1516399262.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:02.427Z,1516399262.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:02.441Z,1516399262.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:02.815Z,1516399262.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:02.834Z,1516399262.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:03.198Z,1516399263.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:03.224Z,1516399263.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:03.602Z,1516399263.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:03.630Z,1516399263.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:03.996Z,1516399263.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:04.028Z,1516399264.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:04.400Z,1516399264.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:04.431Z,1516399264.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:04.820Z,1516399264.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:04.839Z,1516399264.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:05.218Z,1516399265.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:05.232Z,1516399265.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:05.606Z,1516399265.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:05.643Z,1516399265.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:05.000Z,1516399266.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:06.030Z,1516399266.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:06.397Z,1516399266.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:06.430Z,1516399266.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:06.807Z,1516399266.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:06.842Z,1516399266.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:07.235Z,1516399267.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:07.255Z,1516399267.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:07.623Z,1516399267.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:07.637Z,1516399267.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:08.004Z,1516399268.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:08.036Z,1516399268.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:08.407Z,1516399268.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:08.438Z,1516399268.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:08.825Z,1516399268.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:08.844Z,1516399268.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:09.226Z,1516399269.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:09.242Z,1516399269.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:09.616Z,1516399269.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:09.647Z,1516399269.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:10.004Z,1516399270.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:10.031Z,1516399270.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:10.395Z,1516399270.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:10.442Z,1516399270.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:10.817Z,1516399270.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:10.844Z,1516399270.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:11.220Z,1516399271.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:11.243Z,1516399271.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:11.615Z,1516399271.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:11.639Z,1516399271.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:12.002Z,1516399272.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:12.047Z,1516399272.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:12.403Z,1516399272.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:12.442Z,1516399272.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:12.816Z,1516399272.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:12.841Z,1516399272.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:13.219Z,1516399273.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:13.247Z,1516399273.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:13.614Z,1516399273.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:13.647Z,1516399273.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:14.004Z,1516399274.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:14.047Z,1516399274.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:14.398Z,1516399274.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:14.418Z,1516399274.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:14.817Z,1516399274.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:14.844Z,1516399274.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:15.210Z,1516399275.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:15.242Z,1516399275.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:15.615Z,1516399275.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:15.643Z,1516399275.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:16.001Z,1516399276.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:16.021Z,1516399276.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:16.408Z,1516399276.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:16.425Z,1516399276.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:16.817Z,1516399276.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:16.858Z,1516399276.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:17.214Z,1516399277.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:17.247Z,1516399277.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:17.611Z,1516399277.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:17.646Z,1516399277.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:18.004Z,1516399278.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:18.021Z,1516399278.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:18.403Z,1516399278.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:18.447Z,1516399278.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:18.818Z,1516399278.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:18.848Z,1516399278.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:19.210Z,1516399279.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:19.229Z,1516399279.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:19.616Z,1516399279.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:19.630Z,1516399279.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:20.010Z,1516399280.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:20.037Z,1516399280.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:20.393Z,1516399280.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:20.416Z,1516399280.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:20.819Z,1516399280.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:20.836Z,1516399280.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:21.224Z,1516399281.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:21.238Z,1516399281.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:21.618Z,1516399281.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:21.657Z,1516399281.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:22.003Z,1516399282.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:22.023Z,1516399282.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:22.407Z,1516399282.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:22.425Z,1516399282.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:22.809Z,1516399282.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:22.834Z,1516399282.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:23.218Z,1516399283.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:23.257Z,1516399283.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:23.609Z,1516399283.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:23.642Z,1516399283.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:24.008Z,1516399284.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:24.027Z,1516399284.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:24.399Z,1516399284.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:24.428Z,1516399284.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:24.819Z,1516399284.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:24.836Z,1516399284.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:25.214Z,1516399285.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:25.229Z,1516399285.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:25.613Z,1516399285.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:25.634Z,1516399285.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:26.011Z,1516399286.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:26.031Z,1516399286.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:26.410Z,1516399286.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:26.424Z,1516399286.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:26.816Z,1516399286.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:26.836Z,1516399286.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:27.222Z,1516399287.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:27.248Z,1516399287.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:27.623Z,1516399287.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:27.639Z,1516399287.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:28.008Z,1516399288.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:28.039Z,1516399288.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:28.408Z,1516399288.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:28.422Z,1516399288.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:28.814Z,1516399288.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:28.839Z,1516399288.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:31.946Z,1516399291.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:31.974Z,1516399291.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:32.086Z,1516399292.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:32.122Z,1516399292.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:32.434Z,1516399292.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:32.448Z,1516399292.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:32.832Z,1516399292.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:32.873Z,1516399292.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:33.229Z,1516399293.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:33.243Z,1516399293.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:33.628Z,1516399293.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:33.648Z,1516399293.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:34.045Z,1516399294.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:34.078Z,1516399294.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:34.429Z,1516399294.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:34.473Z,1516399294.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:34.830Z,1516399294.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:34.844Z,1516399294.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:35.228Z,1516399295.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:35.248Z,1516399295.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:35.625Z,1516399295.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:35.644Z,1516399295.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:36.029Z,1516399296.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:36.043Z,1516399296.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:36.428Z,1516399296.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:36.442Z,1516399296.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:36.828Z,1516399296.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:36.851Z,1516399296.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:37.245Z,1516399297.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:37.275Z,1516399297.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:37.634Z,1516399297.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:37.678Z,1516399297.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:38.026Z,1516399298.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:38.040Z,1516399298.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:38.430Z,1516399298.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:38.448Z,1516399298.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:38.836Z,1516399298.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:38.853Z,1516399298.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:39.238Z,1516399299.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:39.280Z,1516399299.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:39.650Z,1516399299.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:39.679Z,1516399299.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:40.029Z,1516399300.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:40.042Z,1516399300.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:40.425Z,1516399300.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:40.444Z,1516399300.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:40.834Z,1516399300.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:40.848Z,1516399300.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:41.233Z,1516399301.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:41.247Z,1516399301.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:41.631Z,1516399301.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:41.655Z,1516399301.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:42.031Z,1516399302.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:42.055Z,1516399302.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:42.431Z,1516399302.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:42.445Z,1516399302.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:42.833Z,1516399302.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:42.847Z,1516399302.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:43.234Z,1516399303.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:43.248Z,1516399303.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:43.634Z,1516399303.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:43.655Z,1516399303.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:44.031Z,1516399304.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:44.045Z,1516399304.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:44.432Z,1516399304.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:44.451Z,1516399304.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:44.834Z,1516399304.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:44.848Z,1516399304.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:45.232Z,1516399305.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:45.255Z,1516399305.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:45.632Z,1516399305.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:45.651Z,1516399305.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:46.026Z,1516399306.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:46.040Z,1516399306.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:46.415Z,1516399306.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:46.440Z,1516399306.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:46.838Z,1516399306.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:46.857Z,1516399306.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:47.245Z,1516399307.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:47.266Z,1516399307.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:47.630Z,1516399307.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:47.659Z,1516399307.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:48.032Z,1516399308.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:48.046Z,1516399308.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:48.420Z,1516399308.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:48.455Z,1516399308.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:48.830Z,1516399308.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:48.862Z,1516399308.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:49.242Z,1516399309.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:49.260Z,1516399309.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:49.630Z,1516399309.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:49.667Z,1516399309.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:50.024Z,1516399310.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:50.059Z,1516399310.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:50.419Z,1516399310.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:50.455Z,1516399310.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:50.830Z,1516399310.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:50.863Z,1516399310.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:51.246Z,1516399311.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:51.260Z,1516399311.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:51.630Z,1516399311.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:51.673Z,1516399311.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:52.024Z,1516399312.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:52.059Z,1516399312.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:52.420Z,1516399312.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:52.439Z,1516399312.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:52.838Z,1516399312.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:52.875Z,1516399312.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:53.242Z,1516399313.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:53.272Z,1516399313.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:53.642Z,1516399313.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:53.656Z,1516399313.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:54.030Z,1516399314.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:54.044Z,1516399314.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:54.433Z,1516399314.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:54.447Z,1516399314.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:54.834Z,1516399314.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:54.848Z,1516399314.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:55.234Z,1516399315.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:55.248Z,1516399315.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:55.635Z,1516399315.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:55.649Z,1516399315.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:56.022Z,1516399316.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:56.042Z,1516399316.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:56.431Z,1516399316.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:56.446Z,1516399316.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:56.832Z,1516399316.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:56.847Z,1516399316.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:57.232Z,1516399317.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:57.255Z,1516399317.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:57.639Z,1516399317.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:57.653Z,1516399317.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:58.035Z,1516399318.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:58.055Z,1516399318.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:58.419Z,1516399318.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:58.445Z,1516399318.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:58.819Z,1516399318.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:58.851Z,1516399318.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:59.232Z,1516399319.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:59.246Z,1516399319.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:01:59.630Z,1516399319.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:01:59.647Z,1516399319.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:00.037Z,1516399320.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:00.051Z,1516399320.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:00.443Z,1516399320.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:00.457Z,1516399320.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:00.842Z,1516399320.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:00.856Z,1516399320.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:01.241Z,1516399321.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:01.255Z,1516399321.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:01.634Z,1516399321.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:01.648Z,1516399321.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:02.019Z,1516399322.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:02.051Z,1516399322.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:02.436Z,1516399322.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:02.450Z,1516399322.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:02.817Z,1516399322.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:02.857Z,1516399322.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:03.243Z,1516399323.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:03.258Z,1516399323.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:03.638Z,1516399323.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:03.656Z,1516399323.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:04.027Z,1516399324.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:04.062Z,1516399324.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:04.424Z,1516399324.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:04.463Z,1516399324.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:04.819Z,1516399324.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:04.852Z,1516399324.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:05.224Z,1516399325.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:05.259Z,1516399325.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:05.627Z,1516399325.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:05.660Z,1516399325.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:06.039Z,1516399326.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:06.065Z,1516399326.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:06.434Z,1516399326.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:06.457Z,1516399326.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:06.842Z,1516399326.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:06.875Z,1516399326.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:07.230Z,1516399327.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:07.244Z,1516399327.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:07.628Z,1516399327.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:07.642Z,1516399327.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:08.028Z,1516399328.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:08.043Z,1516399328.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:08.429Z,1516399328.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:08.443Z,1516399328.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:08.828Z,1516399328.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:08.842Z,1516399328.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:09.242Z,1516399329.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:09.256Z,1516399329.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:09.638Z,1516399329.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:09.652Z,1516399329.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:10.034Z,1516399330.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:10.054Z,1516399330.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:10.431Z,1516399330.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:10.451Z,1516399330.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:10.831Z,1516399330.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:10.850Z,1516399330.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:11.233Z,1516399331.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:11.247Z,1516399331.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:11.630Z,1516399331.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:11.644Z,1516399331.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:12.037Z,1516399332.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:12.052Z,1516399332.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:12.438Z,1516399332.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:12.458Z,1516399332.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:12.833Z,1516399332.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:12.847Z,1516399332.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:13.222Z,1516399333.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:13.247Z,1516399333.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:13.615Z,1516399333.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:13.641Z,1516399333.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:14.015Z,1516399334.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:14.046Z,1516399334.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:14.436Z,1516399334.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:14.450Z,1516399334.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:14.815Z,1516399334.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:14.841Z,1516399334.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:15.241Z,1516399335.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:15.255Z,1516399335.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:15.640Z,1516399335.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:15.659Z,1516399335.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:16.042Z,1516399336.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:16.062Z,1516399336.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:16.425Z,1516399336.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:16.442Z,1516399336.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:16.822Z,1516399336.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:16.844Z,1516399336.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:17.216Z,1516399337.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:17.250Z,1516399337.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:17.615Z,1516399337.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:17.646Z,1516399337.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:18.037Z,1516399338.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:18.051Z,1516399338.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:18.441Z,1516399338.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:18.458Z,1516399338.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:18.841Z,1516399338.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:18.863Z,1516399338.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:19.239Z,1516399339.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:19.259Z,1516399339.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:19.632Z,1516399339.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:19.645Z,1516399339.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:20.031Z,1516399340.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:20.051Z,1516399340.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:20.436Z,1516399340.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:20.450Z,1516399340.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:20.815Z,1516399340.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:20.850Z,1516399340.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:21.242Z,1516399341.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:21.256Z,1516399341.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:21.642Z,1516399341.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:21.656Z,1516399341.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:22.043Z,1516399342.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:22.056Z,1516399342.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:22.419Z,1516399342.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:22.444Z,1516399342.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:22.819Z,1516399342.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:22.850Z,1516399342.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:23.216Z,1516399343.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:23.248Z,1516399343.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:23.631Z,1516399343.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:23.651Z,1516399343.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:24.038Z,1516399344.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:24.052Z,1516399344.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:24.438Z,1516399344.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:24.458Z,1516399344.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:24.842Z,1516399344.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:24.856Z,1516399344.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:25.219Z,1516399345.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:25.255Z,1516399345.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:25.623Z,1516399345.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:25.649Z,1516399345.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:26.023Z,1516399346.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:26.048Z,1516399346.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:26.420Z,1516399346.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:26.447Z,1516399346.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:26.823Z,1516399346.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:26.849Z,1516399346.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:27.242Z,1516399347.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:27.256Z,1516399347.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:27.642Z,1516399347.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:27.656Z,1516399347.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:28.025Z,1516399348.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:28.051Z,1516399348.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:28.423Z,1516399348.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:28.448Z,1516399348.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:28.820Z,1516399348.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:28.850Z,1516399348.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:31.965Z,1516399351.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:31.999Z,1516399351.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:32.086Z,1516399352.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:32.119Z,1516399352.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:32.474Z,1516399352.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:32.495Z,1516399352.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:32.885Z,1516399352.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:32.899Z,1516399352.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:33.274Z,1516399353.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:33.303Z,1516399353.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:33.661Z,1516399353.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:33.675Z,1516399353.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:34.063Z,1516399354.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:34.104Z,1516399354.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:34.457Z,1516399354.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:34.479Z,1516399354.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:34.863Z,1516399354.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:34.883Z,1516399354.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:35.278Z,1516399355.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:35.312Z,1516399355.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:35.678Z,1516399355.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:35.707Z,1516399355.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:36.070Z,1516399356.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:36.085Z,1516399356.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:36.465Z,1516399356.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:36.479Z,1516399356.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:36.865Z,1516399356.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:36.880Z,1516399356.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:37.265Z,1516399357.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:37.283Z,1516399357.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:37.664Z,1516399357.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:37.678Z,1516399357.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:38.066Z,1516399358.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:38.081Z,1516399358.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:38.490Z,1516399358.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:38.511Z,1516399358.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:38.880Z,1516399358.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:38.894Z,1516399358.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:39.255Z,1516399359.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:39.291Z,1516399359.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:39.655Z,1516399359.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:39.691Z,1516399359.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:40.051Z,1516399360.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:40.091Z,1516399360.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:40.460Z,1516399360.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:40.475Z,1516399360.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:40.863Z,1516399360.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:40.879Z,1516399360.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:41.274Z,1516399361.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:41.304Z,1516399361.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:41.678Z,1516399361.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:41.707Z,1516399361.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:42.078Z,1516399362.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:42.102Z,1516399362.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:42.456Z,1516399362.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:42.491Z,1516399362.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:42.857Z,1516399362.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:42.871Z,1516399362.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:43.268Z,1516399363.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:43.282Z,1516399363.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:43.664Z,1516399363.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:43.678Z,1516399363.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:44.078Z,1516399364.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:44.110Z,1516399364.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:44.448Z,1516399364.448 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T22:02:44.448Z,1516399364.448 [NAL9602] Data Fault, FailCount= 5
2018-01-19T22:02:44.448Z,1516399364.448 [NAL9602](ERROR): Data Fault
2018-01-19T22:02:44.466Z,1516399364.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:44.480Z,1516399364.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:44.513Z,1516399364.513 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T22:02:44.514Z,1516399364.514 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-19T22:02:44.838Z,1516399364.838 [NAL9602](INFO): Powering down
2018-01-19T22:02:44.860Z,1516399364.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:44.903Z,1516399364.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:44.914Z,1516399364.914 [CommandLine](FAULT): Scheduling is paused
2018-01-19T22:02:44.915Z,1516399364.915 [CBIT](INFO): Critical error at 20180119T220244
2018-01-19T22:02:44.915Z,1516399364.915 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2018-01-19T22:02:45.260Z,1516399365.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:45.279Z,1516399365.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:45.665Z,1516399365.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:45.680Z,1516399365.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:46.060Z,1516399366.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:46.074Z,1516399366.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:46.459Z,1516399366.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:46.473Z,1516399366.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:46.859Z,1516399366.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:46.883Z,1516399366.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:47.267Z,1516399367.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:47.281Z,1516399367.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:47.658Z,1516399367.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:47.674Z,1516399367.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:48.058Z,1516399368.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:48.080Z,1516399368.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:48.458Z,1516399368.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:48.473Z,1516399368.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:48.855Z,1516399368.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:48.869Z,1516399368.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:49.258Z,1516399369.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:49.276Z,1516399369.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:49.666Z,1516399369.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:49.680Z,1516399369.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:50.058Z,1516399370.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:50.072Z,1516399370.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:50.461Z,1516399370.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:50.479Z,1516399370.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:50.866Z,1516399370.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:50.880Z,1516399370.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:51.248Z,1516399371.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:51.278Z,1516399371.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:51.666Z,1516399371.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:51.680Z,1516399371.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:52.059Z,1516399372.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:52.079Z,1516399372.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:52.459Z,1516399372.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:52.473Z,1516399372.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:52.858Z,1516399372.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:52.879Z,1516399372.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:53.258Z,1516399373.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:53.279Z,1516399373.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:53.659Z,1516399373.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:53.674Z,1516399373.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:54.058Z,1516399374.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:54.079Z,1516399374.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:54.458Z,1516399374.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:54.479Z,1516399374.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:54.859Z,1516399374.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:54.874Z,1516399374.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:55.269Z,1516399375.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:55.284Z,1516399375.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:55.658Z,1516399375.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:55.679Z,1516399375.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:56.065Z,1516399376.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:56.079Z,1516399376.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:56.461Z,1516399376.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:56.480Z,1516399376.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:56.858Z,1516399376.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:56.875Z,1516399376.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:57.259Z,1516399377.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:57.274Z,1516399377.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:57.658Z,1516399377.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:57.685Z,1516399377.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:58.066Z,1516399378.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:58.080Z,1516399378.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:58.452Z,1516399378.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:58.482Z,1516399378.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:58.866Z,1516399378.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:58.881Z,1516399378.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:59.250Z,1516399379.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:59.275Z,1516399379.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:02:59.648Z,1516399379.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:02:59.678Z,1516399379.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:00.059Z,1516399380.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:00.083Z,1516399380.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:00.450Z,1516399380.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:00.486Z,1516399380.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:00.848Z,1516399380.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:00.870Z,1516399380.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:01.259Z,1516399381.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:01.283Z,1516399381.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:01.650Z,1516399381.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:01.686Z,1516399381.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:02.058Z,1516399382.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:02.083Z,1516399382.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:02.455Z,1516399382.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:02.489Z,1516399382.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:02.858Z,1516399382.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:02.891Z,1516399382.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:03.248Z,1516399383.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:03.262Z,1516399383.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:03.659Z,1516399383.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:03.689Z,1516399383.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:04.058Z,1516399384.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:04.072Z,1516399384.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:04.452Z,1516399384.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:04.466Z,1516399384.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:04.855Z,1516399384.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:04.875Z,1516399384.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:05.255Z,1516399385.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:05.269Z,1516399385.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:05.651Z,1516399385.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:05.666Z,1516399385.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:06.063Z,1516399386.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:06.077Z,1516399386.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:06.462Z,1516399386.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:06.476Z,1516399386.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:06.855Z,1516399386.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:06.869Z,1516399386.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:07.267Z,1516399387.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:07.281Z,1516399387.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:07.657Z,1516399387.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:07.671Z,1516399387.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:08.059Z,1516399388.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:08.074Z,1516399388.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:08.463Z,1516399388.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:08.483Z,1516399388.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:08.863Z,1516399388.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:08.877Z,1516399388.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:09.259Z,1516399389.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:09.274Z,1516399389.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:09.663Z,1516399389.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:09.683Z,1516399389.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:10.063Z,1516399390.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:10.077Z,1516399390.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:10.459Z,1516399390.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:10.474Z,1516399390.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:10.863Z,1516399390.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:10.883Z,1516399390.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:11.263Z,1516399391.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:11.277Z,1516399391.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:11.659Z,1516399391.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:11.673Z,1516399391.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:12.063Z,1516399392.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:12.083Z,1516399392.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:12.463Z,1516399392.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:12.477Z,1516399392.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:12.859Z,1516399392.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:12.874Z,1516399392.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:13.264Z,1516399393.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:13.278Z,1516399393.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:13.664Z,1516399393.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:13.678Z,1516399393.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:14.064Z,1516399394.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:14.078Z,1516399394.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:14.464Z,1516399394.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:14.479Z,1516399394.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:14.864Z,1516399394.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:14.878Z,1516399394.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:15.260Z,1516399395.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:15.274Z,1516399395.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:15.661Z,1516399395.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:15.676Z,1516399395.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:16.058Z,1516399396.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:16.072Z,1516399396.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:16.460Z,1516399396.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:16.478Z,1516399396.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:16.857Z,1516399396.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:16.887Z,1516399396.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:17.264Z,1516399397.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:17.277Z,1516399397.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:17.658Z,1516399397.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:17.677Z,1516399397.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:18.061Z,1516399398.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:18.080Z,1516399398.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:18.467Z,1516399398.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:18.481Z,1516399398.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:18.861Z,1516399398.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:18.876Z,1516399398.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:19.273Z,1516399399.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:19.316Z,1516399399.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:19.665Z,1516399399.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:19.679Z,1516399399.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:20.067Z,1516399400.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:20.081Z,1516399400.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:20.466Z,1516399400.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:20.480Z,1516399400.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:20.863Z,1516399400.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:20.877Z,1516399400.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:21.261Z,1516399401.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:21.276Z,1516399401.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:21.669Z,1516399401.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:21.684Z,1516399401.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:22.059Z,1516399402.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:22.078Z,1516399402.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:22.462Z,1516399402.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:22.476Z,1516399402.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:22.864Z,1516399402.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:22.891Z,1516399402.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:23.267Z,1516399403.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:23.281Z,1516399403.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:23.667Z,1516399403.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:23.689Z,1516399403.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:24.070Z,1516399404.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:24.093Z,1516399404.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:24.457Z,1516399404.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:24.495Z,1516399404.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:24.857Z,1516399404.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:24.901Z,1516399404.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:25.257Z,1516399405.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:25.300Z,1516399405.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:25.657Z,1516399405.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:25.706Z,1516399405.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:25.706Z,1516399405.706 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-01-19T22:03:25.706Z,1516399405.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:03:25.708Z,1516399405.708 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:25.708Z,1516399405.708 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-01-19T22:03:25.708Z,1516399405.708 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:03:25.731Z,1516399405.731 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:25.731Z,1516399405.731 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-01-19T22:03:25.731Z,1516399405.731 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:03:25.761Z,1516399405.761 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:03:25.761Z,1516399405.761 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:03:25.761Z,1516399405.761 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:03:26.064Z,1516399406.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:26.113Z,1516399406.113 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:03:26.113Z,1516399406.113 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-01-19T22:03:26.113Z,1516399406.113 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:03:26.114Z,1516399406.114 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-01-19T22:03:26.114Z,1516399406.114 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:03:26.114Z,1516399406.114 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-01-19T22:03:26.478Z,1516399406.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:26.512Z,1516399406.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:03:26.512Z,1516399406.512 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:03:26.521Z,1516399406.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:03:26.521Z,1516399406.521 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:03:26.522Z,1516399406.522 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:03:26.522Z,1516399406.522 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:03:26.523Z,1516399406.523 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:03:26.523Z,1516399406.523 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:03:26.523Z,1516399406.523 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:03:26.865Z,1516399406.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:26.914Z,1516399406.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:03:26.915Z,1516399406.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:27.259Z,1516399407.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:27.283Z,1516399407.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:03:27.284Z,1516399407.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:27.661Z,1516399407.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:27.708Z,1516399407.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:03:27.714Z,1516399407.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:28.063Z,1516399408.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:28.091Z,1516399408.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:03:28.092Z,1516399408.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:28.464Z,1516399408.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:28.491Z,1516399408.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:03:28.492Z,1516399408.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:28.867Z,1516399408.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:28.899Z,1516399408.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:03:28.900Z,1516399408.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:34.088Z,1516399414.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:34.102Z,1516399414.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:03:34.103Z,1516399414.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:34.207Z,1516399414.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:34.235Z,1516399414.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-01-19T22:03:34.236Z,1516399414.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:34.595Z,1516399414.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:34.633Z,1516399414.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-01-19T22:03:34.634Z,1516399414.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:34.999Z,1516399414.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:35.013Z,1516399415.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-01-19T22:03:35.014Z,1516399415.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:35.390Z,1516399415.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:35.404Z,1516399415.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-01-19T22:03:35.405Z,1516399415.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:35.791Z,1516399415.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:35.804Z,1516399415.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-01-19T22:03:35.805Z,1516399415.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:36.197Z,1516399416.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:36.211Z,1516399416.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-01-19T22:03:36.212Z,1516399416.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:36.594Z,1516399416.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:36.608Z,1516399416.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-01-19T22:03:36.609Z,1516399416.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:36.995Z,1516399416.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:37.009Z,1516399417.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-01-19T22:03:37.009Z,1516399417.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:37.395Z,1516399417.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:37.409Z,1516399417.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-01-19T22:03:37.410Z,1516399417.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:37.791Z,1516399417.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:37.805Z,1516399417.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-01-19T22:03:37.806Z,1516399417.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:38.194Z,1516399418.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:38.211Z,1516399418.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-01-19T22:03:38.212Z,1516399418.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:38.594Z,1516399418.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:38.608Z,1516399418.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-01-19T22:03:38.610Z,1516399418.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:38.990Z,1516399418.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:39.005Z,1516399419.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-01-19T22:03:39.006Z,1516399419.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:39.390Z,1516399419.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:39.405Z,1516399419.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-01-19T22:03:39.406Z,1516399419.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:39.790Z,1516399419.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:39.804Z,1516399419.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-01-19T22:03:39.805Z,1516399419.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:40.196Z,1516399420.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:40.210Z,1516399420.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-01-19T22:03:40.211Z,1516399420.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:40.593Z,1516399420.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:40.607Z,1516399420.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-19T22:03:40.608Z,1516399420.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:40.990Z,1516399420.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:41.004Z,1516399421.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-01-19T22:03:41.005Z,1516399421.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:41.394Z,1516399421.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:41.408Z,1516399421.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-19T22:03:41.409Z,1516399421.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:41.794Z,1516399421.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:41.808Z,1516399421.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-19T22:03:41.809Z,1516399421.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:42.190Z,1516399422.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:42.204Z,1516399422.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-01-19T22:03:42.205Z,1516399422.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:42.596Z,1516399422.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:42.615Z,1516399422.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-01-19T22:03:42.616Z,1516399422.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:42.994Z,1516399422.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:43.014Z,1516399423.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-01-19T22:03:43.015Z,1516399423.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:43.386Z,1516399423.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:43.400Z,1516399423.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-01-19T22:03:43.421Z,1516399423.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:43.787Z,1516399423.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:43.801Z,1516399423.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-19T22:03:43.802Z,1516399423.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:44.187Z,1516399424.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:44.214Z,1516399424.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-19T22:03:44.215Z,1516399424.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:44.586Z,1516399424.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:44.600Z,1516399424.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-19T22:03:44.601Z,1516399424.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:44.987Z,1516399424.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:45.009Z,1516399425.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-19T22:03:45.010Z,1516399425.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:45.390Z,1516399425.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:45.410Z,1516399425.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-19T22:03:45.411Z,1516399425.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:45.787Z,1516399425.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:45.801Z,1516399425.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:46.190Z,1516399426.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:46.204Z,1516399426.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:46.593Z,1516399426.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:46.607Z,1516399426.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:46.996Z,1516399426.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:47.009Z,1516399427.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:47.390Z,1516399427.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:47.407Z,1516399427.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:47.793Z,1516399427.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:47.807Z,1516399427.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:48.190Z,1516399428.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:48.204Z,1516399428.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:48.590Z,1516399428.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:48.604Z,1516399428.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:48.994Z,1516399428.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:49.008Z,1516399429.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:49.392Z,1516399429.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:49.406Z,1516399429.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:49.797Z,1516399429.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:49.812Z,1516399429.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:50.193Z,1516399430.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:50.215Z,1516399430.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:50.594Z,1516399430.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:50.608Z,1516399430.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:50.990Z,1516399430.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:51.005Z,1516399431.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:51.390Z,1516399431.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:51.404Z,1516399431.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:51.788Z,1516399431.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:51.801Z,1516399431.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:52.194Z,1516399432.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:52.209Z,1516399432.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:52.591Z,1516399432.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:52.610Z,1516399432.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:52.996Z,1516399432.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:53.010Z,1516399433.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:53.390Z,1516399433.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:53.404Z,1516399433.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:53.791Z,1516399433.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:53.818Z,1516399433.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:54.196Z,1516399434.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:54.210Z,1516399434.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:54.594Z,1516399434.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:54.609Z,1516399434.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:54.993Z,1516399434.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:55.006Z,1516399435.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:55.387Z,1516399435.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:55.401Z,1516399435.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:55.803Z,1516399435.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:55.817Z,1516399435.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:56.194Z,1516399436.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:56.208Z,1516399436.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:56.590Z,1516399436.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:56.604Z,1516399436.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:56.993Z,1516399436.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:57.011Z,1516399437.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:57.393Z,1516399437.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:57.407Z,1516399437.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:57.792Z,1516399437.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:57.805Z,1516399437.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:58.193Z,1516399438.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:58.208Z,1516399438.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:58.593Z,1516399438.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:58.607Z,1516399438.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:58.996Z,1516399438.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:59.012Z,1516399439.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:59.402Z,1516399439.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:59.417Z,1516399439.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:03:59.794Z,1516399439.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:03:59.809Z,1516399439.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:00.197Z,1516399440.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:00.211Z,1516399440.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:00.598Z,1516399440.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:00.612Z,1516399440.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:00.993Z,1516399440.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:01.011Z,1516399441.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:01.387Z,1516399441.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:01.401Z,1516399441.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:01.793Z,1516399441.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:01.811Z,1516399441.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:02.198Z,1516399442.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:02.212Z,1516399442.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:02.592Z,1516399442.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:02.605Z,1516399442.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:02.998Z,1516399442.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:03.019Z,1516399443.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:03.393Z,1516399443.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:03.411Z,1516399443.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:03.800Z,1516399443.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:03.814Z,1516399443.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:04.200Z,1516399444.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:04.219Z,1516399444.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:04.593Z,1516399444.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:04.614Z,1516399444.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:05.000Z,1516399445.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:05.014Z,1516399445.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:05.398Z,1516399445.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:05.413Z,1516399445.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:05.795Z,1516399445.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:05.809Z,1516399445.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:06.197Z,1516399446.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:06.211Z,1516399446.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:06.598Z,1516399446.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:06.613Z,1516399446.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:06.993Z,1516399446.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:07.012Z,1516399447.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:07.398Z,1516399447.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:07.411Z,1516399447.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:07.797Z,1516399447.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:07.811Z,1516399447.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:08.201Z,1516399448.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:08.215Z,1516399448.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:08.591Z,1516399448.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:08.605Z,1516399448.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:08.999Z,1516399448.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:09.013Z,1516399449.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:09.399Z,1516399449.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:09.414Z,1516399449.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:09.798Z,1516399449.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:09.812Z,1516399449.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:10.198Z,1516399450.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:10.212Z,1516399450.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:10.591Z,1516399450.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:10.617Z,1516399450.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:10.000Z,1516399451.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:11.014Z,1516399451.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:11.399Z,1516399451.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:11.414Z,1516399451.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:11.792Z,1516399451.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:11.816Z,1516399451.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:12.191Z,1516399452.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:12.205Z,1516399452.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:12.594Z,1516399452.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:12.609Z,1516399452.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:13.002Z,1516399453.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:13.019Z,1516399453.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:13.399Z,1516399453.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:13.413Z,1516399453.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:13.790Z,1516399453.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:13.817Z,1516399453.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:14.198Z,1516399454.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:14.212Z,1516399454.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:14.582Z,1516399454.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:14.616Z,1516399454.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:15.002Z,1516399455.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:15.016Z,1516399455.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:15.387Z,1516399455.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:15.414Z,1516399455.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:15.790Z,1516399455.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:15.817Z,1516399455.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:16.181Z,1516399456.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:16.203Z,1516399456.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:16.591Z,1516399456.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:16.617Z,1516399456.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:16.983Z,1516399456.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:17.019Z,1516399457.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:17.380Z,1516399457.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:17.395Z,1516399457.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:17.788Z,1516399457.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:17.822Z,1516399457.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:18.183Z,1516399458.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:18.197Z,1516399458.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:18.584Z,1516399458.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:18.599Z,1516399458.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:18.992Z,1516399458.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:19.007Z,1516399459.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:19.394Z,1516399459.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:19.410Z,1516399459.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:19.787Z,1516399459.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:19.801Z,1516399459.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:20.196Z,1516399460.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:20.211Z,1516399460.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:20.594Z,1516399460.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:20.608Z,1516399460.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:20.998Z,1516399460.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:21.035Z,1516399461.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:21.396Z,1516399461.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:21.410Z,1516399461.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:21.789Z,1516399461.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:21.803Z,1516399461.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:22.196Z,1516399462.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:22.210Z,1516399462.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:22.596Z,1516399462.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:22.610Z,1516399462.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:22.992Z,1516399462.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:23.006Z,1516399463.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:23.389Z,1516399463.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:23.404Z,1516399463.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:23.792Z,1516399463.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:23.807Z,1516399463.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:24.189Z,1516399464.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:24.210Z,1516399464.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:24.590Z,1516399464.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:24.605Z,1516399464.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:24.992Z,1516399464.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:25.011Z,1516399465.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:25.396Z,1516399465.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:25.410Z,1516399465.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:25.788Z,1516399465.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:25.802Z,1516399465.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:26.190Z,1516399466.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:26.208Z,1516399466.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:26.596Z,1516399466.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:26.610Z,1516399466.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:26.998Z,1516399466.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:27.012Z,1516399467.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:27.396Z,1516399467.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:27.411Z,1516399467.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:27.796Z,1516399467.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:27.810Z,1516399467.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:28.196Z,1516399468.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:28.210Z,1516399468.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:28.213Z,1516399468.213 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T22:04:28.213Z,1516399468.213 [Default:CheckIn:C.Wait] Stopped
2018-01-19T22:04:28.213Z,1516399468.213 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T22:04:28.214Z,1516399468.214 [Default:CheckIn:D] Running Loop=1
2018-01-19T22:04:28.593Z,1516399468.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:28.612Z,1516399468.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:28.619Z,1516399468.619 [Default:CheckIn:D] Stopped
2018-01-19T22:04:28.619Z,1516399468.619 [Default:CheckIn:E] Running Loop=1
2018-01-19T22:04:28.991Z,1516399468.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:29.005Z,1516399469.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:29.008Z,1516399469.008 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 51.676554 min 
2018-01-19T22:04:29.008Z,1516399469.008 [Default:CheckIn:E] Stopped
2018-01-19T22:04:29.009Z,1516399469.009 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T22:04:29.009Z,1516399469.009 [Default:CheckIn] Stopped
2018-01-19T22:04:29.009Z,1516399469.009 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T22:04:29.009Z,1516399469.009 [Default:CheckIn](INFO): Running loop #6
2018-01-19T22:04:29.009Z,1516399469.009 [Default:CheckIn] Running Loop=6
2018-01-19T22:04:29.009Z,1516399469.009 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T22:04:29.009Z,1516399469.009 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T22:04:32.094Z,1516399472.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:32.108Z,1516399472.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:32.219Z,1516399472.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:32.256Z,1516399472.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:32.561Z,1516399472.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:32.574Z,1516399472.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:32.959Z,1516399472.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:32.973Z,1516399472.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:33.359Z,1516399473.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:33.379Z,1516399473.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:33.760Z,1516399473.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:33.774Z,1516399473.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:34.160Z,1516399474.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:34.174Z,1516399474.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:34.561Z,1516399474.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:34.575Z,1516399474.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:34.960Z,1516399474.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:34.973Z,1516399474.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:35.359Z,1516399475.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:35.373Z,1516399475.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:35.760Z,1516399475.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:35.779Z,1516399475.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:36.160Z,1516399476.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:36.179Z,1516399476.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:36.556Z,1516399476.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:36.570Z,1516399476.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:36.959Z,1516399476.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:36.979Z,1516399476.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:37.360Z,1516399477.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:37.379Z,1516399477.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:37.757Z,1516399477.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:37.771Z,1516399477.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:38.161Z,1516399478.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:38.175Z,1516399478.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:38.561Z,1516399478.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:38.575Z,1516399478.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:38.955Z,1516399478.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:38.981Z,1516399478.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:39.359Z,1516399479.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:39.389Z,1516399479.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:39.759Z,1516399479.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:39.789Z,1516399479.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:40.155Z,1516399480.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:40.168Z,1516399480.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:40.559Z,1516399480.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:40.573Z,1516399480.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:40.963Z,1516399480.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:40.977Z,1516399480.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:41.356Z,1516399481.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:41.370Z,1516399481.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:41.759Z,1516399481.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:41.774Z,1516399481.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:42.161Z,1516399482.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:42.175Z,1516399482.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:42.555Z,1516399482.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:42.569Z,1516399482.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:42.961Z,1516399482.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:42.975Z,1516399482.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:43.361Z,1516399483.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:43.375Z,1516399483.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:43.763Z,1516399483.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:43.777Z,1516399483.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:44.163Z,1516399484.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:44.178Z,1516399484.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:44.563Z,1516399484.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:44.578Z,1516399484.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:44.611Z,1516399484.611 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T22:04:44.611Z,1516399484.611 [NAL9602] No Fault, FailCount= 5
2018-01-19T22:04:44.949Z,1516399484.949 [NAL9602](INFO): Powering up NAL9602
2018-01-19T22:04:44.967Z,1516399484.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:44.981Z,1516399484.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:45.365Z,1516399485.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:45.380Z,1516399485.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:45.765Z,1516399485.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:45.779Z,1516399485.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:46.166Z,1516399486.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:46.179Z,1516399486.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:46.565Z,1516399486.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:46.579Z,1516399486.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:46.965Z,1516399486.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:46.979Z,1516399486.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:47.366Z,1516399487.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:47.380Z,1516399487.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:47.760Z,1516399487.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:47.778Z,1516399487.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:48.165Z,1516399488.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:48.187Z,1516399488.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:48.564Z,1516399488.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:48.578Z,1516399488.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:48.969Z,1516399488.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:48.984Z,1516399488.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:49.366Z,1516399489.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:49.383Z,1516399489.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:49.764Z,1516399489.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:49.778Z,1516399489.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:50.171Z,1516399490.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:50.185Z,1516399490.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:50.564Z,1516399490.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:50.583Z,1516399490.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:50.968Z,1516399490.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:50.982Z,1516399490.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:51.367Z,1516399491.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:51.382Z,1516399491.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:51.768Z,1516399491.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:51.786Z,1516399491.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:52.167Z,1516399492.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:52.182Z,1516399492.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:52.559Z,1516399492.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:52.573Z,1516399492.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:52.970Z,1516399492.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:52.987Z,1516399492.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:53.368Z,1516399493.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:53.382Z,1516399493.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:53.762Z,1516399493.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:53.776Z,1516399493.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:54.168Z,1516399494.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:54.184Z,1516399494.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:54.569Z,1516399494.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:54.583Z,1516399494.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:54.967Z,1516399494.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:54.981Z,1516399494.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:55.362Z,1516399495.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:55.386Z,1516399495.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:55.775Z,1516399495.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:55.788Z,1516399495.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:56.142Z,1516399496.142 [NAL9602](INFO): NAL9602 initialized
2018-01-19T22:04:56.172Z,1516399496.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:56.187Z,1516399496.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:56.558Z,1516399496.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:56.581Z,1516399496.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:56.976Z,1516399496.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:56.991Z,1516399496.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:57.373Z,1516399497.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:57.388Z,1516399497.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:57.768Z,1516399497.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:57.787Z,1516399497.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:58.169Z,1516399498.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:58.182Z,1516399498.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:58.569Z,1516399498.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:58.583Z,1516399498.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:58.960Z,1516399498.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:58.992Z,1516399498.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:59.367Z,1516399499.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:59.393Z,1516399499.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:04:59.769Z,1516399499.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:04:59.783Z,1516399499.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:00.173Z,1516399500.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:00.187Z,1516399500.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:00.565Z,1516399500.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:00.579Z,1516399500.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:00.962Z,1516399500.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:00.976Z,1516399500.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:01.369Z,1516399501.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:01.391Z,1516399501.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:01.774Z,1516399501.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:01.788Z,1516399501.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:02.170Z,1516399502.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:02.185Z,1516399502.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:02.564Z,1516399502.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:02.581Z,1516399502.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:02.968Z,1516399502.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:02.982Z,1516399502.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:03.370Z,1516399503.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:03.385Z,1516399503.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:03.774Z,1516399503.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:03.788Z,1516399503.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:04.173Z,1516399504.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:04.194Z,1516399504.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:04.552Z,1516399504.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:04.575Z,1516399504.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:04.964Z,1516399504.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:04.991Z,1516399504.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:05.368Z,1516399505.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:05.382Z,1516399505.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:05.773Z,1516399505.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:05.787Z,1516399505.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:06.174Z,1516399506.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:06.188Z,1516399506.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:06.574Z,1516399506.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:06.588Z,1516399506.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:06.970Z,1516399506.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:06.984Z,1516399506.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:07.367Z,1516399507.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:07.389Z,1516399507.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:07.769Z,1516399507.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:07.783Z,1516399507.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:08.166Z,1516399508.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:08.180Z,1516399508.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:08.572Z,1516399508.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:08.587Z,1516399508.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:08.974Z,1516399508.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:08.988Z,1516399508.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:09.369Z,1516399509.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:09.384Z,1516399509.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:09.768Z,1516399509.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:09.782Z,1516399509.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:10.168Z,1516399510.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:10.182Z,1516399510.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:10.561Z,1516399510.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:10.576Z,1516399510.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:10.958Z,1516399510.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:10.985Z,1516399510.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:11.368Z,1516399511.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:11.384Z,1516399511.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:11.774Z,1516399511.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:11.788Z,1516399511.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:12.177Z,1516399512.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:12.220Z,1516399512.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:12.576Z,1516399512.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:12.590Z,1516399512.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:12.967Z,1516399512.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:12.982Z,1516399512.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:13.358Z,1516399513.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:13.383Z,1516399513.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:13.769Z,1516399513.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:13.783Z,1516399513.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:14.167Z,1516399514.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:14.182Z,1516399514.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:14.574Z,1516399514.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:14.588Z,1516399514.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:14.978Z,1516399514.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:14.992Z,1516399514.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:15.367Z,1516399515.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:15.393Z,1516399515.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:15.766Z,1516399515.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:15.785Z,1516399515.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:16.169Z,1516399516.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:16.182Z,1516399516.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:16.553Z,1516399516.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:16.580Z,1516399516.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:16.956Z,1516399516.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:16.991Z,1516399516.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:17.359Z,1516399517.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:17.386Z,1516399517.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:17.762Z,1516399517.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:17.795Z,1516399517.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:18.182Z,1516399518.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:18.196Z,1516399518.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:18.579Z,1516399518.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:18.593Z,1516399518.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:18.953Z,1516399518.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:18.976Z,1516399518.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:19.359Z,1516399519.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:19.391Z,1516399519.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:19.756Z,1516399519.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:19.790Z,1516399519.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:20.160Z,1516399520.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:20.191Z,1516399520.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:20.579Z,1516399520.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:20.593Z,1516399520.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:20.983Z,1516399520.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:20.997Z,1516399520.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:21.367Z,1516399521.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:21.399Z,1516399521.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:21.760Z,1516399521.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:21.791Z,1516399521.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:22.159Z,1516399522.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:22.192Z,1516399522.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:22.556Z,1516399522.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:22.583Z,1516399522.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:22.967Z,1516399522.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:22.983Z,1516399522.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:23.368Z,1516399523.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:23.383Z,1516399523.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:23.770Z,1516399523.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:23.788Z,1516399523.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:24.174Z,1516399524.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:24.195Z,1516399524.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:24.574Z,1516399524.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:24.591Z,1516399524.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:24.969Z,1516399524.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:24.991Z,1516399524.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:25.368Z,1516399525.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:25.382Z,1516399525.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:25.765Z,1516399525.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:25.779Z,1516399525.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:26.162Z,1516399526.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:26.189Z,1516399526.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:26.579Z,1516399526.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:26.593Z,1516399526.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:26.982Z,1516399526.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:26.996Z,1516399526.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:27.376Z,1516399527.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:27.395Z,1516399527.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:27.771Z,1516399527.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:27.786Z,1516399527.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:28.176Z,1516399528.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:28.190Z,1516399528.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:28.570Z,1516399528.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:28.584Z,1516399528.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:28.963Z,1516399528.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:28.986Z,1516399528.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:29.372Z,1516399529.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:29.389Z,1516399529.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:32.544Z,1516399532.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:32.579Z,1516399532.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:32.691Z,1516399532.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:32.734Z,1516399532.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:33.062Z,1516399533.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:33.091Z,1516399533.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:33.449Z,1516399533.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:33.474Z,1516399533.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:33.860Z,1516399533.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:33.888Z,1516399533.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:34.251Z,1516399534.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:34.265Z,1516399534.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:34.654Z,1516399534.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:34.668Z,1516399534.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:35.062Z,1516399535.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:35.094Z,1516399535.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:35.462Z,1516399535.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:35.494Z,1516399535.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:35.838Z,1516399535.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:35.861Z,1516399535.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:36.251Z,1516399536.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:36.266Z,1516399536.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:36.652Z,1516399536.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:36.670Z,1516399536.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:37.053Z,1516399537.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:37.068Z,1516399537.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:37.455Z,1516399537.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:37.469Z,1516399537.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:37.866Z,1516399537.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:37.880Z,1516399537.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:38.255Z,1516399538.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:38.275Z,1516399538.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:38.653Z,1516399538.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:38.671Z,1516399538.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:39.052Z,1516399539.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:39.067Z,1516399539.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:39.454Z,1516399539.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:39.469Z,1516399539.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:39.866Z,1516399539.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:39.899Z,1516399539.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:40.258Z,1516399540.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:40.279Z,1516399540.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:40.651Z,1516399540.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:40.671Z,1516399540.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:41.052Z,1516399541.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:41.066Z,1516399541.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:41.453Z,1516399541.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:41.467Z,1516399541.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:41.866Z,1516399541.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:41.880Z,1516399541.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:42.261Z,1516399542.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:42.276Z,1516399542.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:42.656Z,1516399542.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:42.673Z,1516399542.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:43.051Z,1516399543.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:43.071Z,1516399543.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:43.471Z,1516399543.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:43.507Z,1516399543.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:43.857Z,1516399543.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:43.878Z,1516399543.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:44.255Z,1516399544.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:44.271Z,1516399544.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:44.655Z,1516399544.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:44.675Z,1516399544.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:45.055Z,1516399545.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:45.069Z,1516399545.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:45.456Z,1516399545.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:45.475Z,1516399545.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:45.870Z,1516399545.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:45.901Z,1516399545.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:46.261Z,1516399546.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:46.275Z,1516399546.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:46.656Z,1516399546.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:46.671Z,1516399546.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:47.050Z,1516399547.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:47.068Z,1516399547.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:47.458Z,1516399547.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:47.472Z,1516399547.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:47.861Z,1516399547.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:47.876Z,1516399547.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:48.261Z,1516399548.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:48.276Z,1516399548.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:48.649Z,1516399548.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:48.662Z,1516399548.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:49.054Z,1516399549.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:49.068Z,1516399549.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:49.462Z,1516399549.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:49.476Z,1516399549.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:49.861Z,1516399549.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:49.875Z,1516399549.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:50.257Z,1516399550.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:50.271Z,1516399550.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:50.656Z,1516399550.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:50.670Z,1516399550.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:51.055Z,1516399551.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:51.069Z,1516399551.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:51.461Z,1516399551.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:51.475Z,1516399551.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:51.860Z,1516399551.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:51.879Z,1516399551.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:52.263Z,1516399552.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:52.279Z,1516399552.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:52.650Z,1516399552.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:52.664Z,1516399552.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:53.046Z,1516399553.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:53.068Z,1516399553.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:53.459Z,1516399553.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:53.473Z,1516399553.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:53.861Z,1516399553.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:53.883Z,1516399553.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:54.260Z,1516399554.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:54.279Z,1516399554.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:54.654Z,1516399554.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:54.668Z,1516399554.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:55.051Z,1516399555.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:55.065Z,1516399555.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:55.460Z,1516399555.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:55.479Z,1516399555.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:55.862Z,1516399555.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:55.876Z,1516399555.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:56.261Z,1516399556.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:56.283Z,1516399556.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:56.656Z,1516399556.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:56.670Z,1516399556.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:57.051Z,1516399557.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:57.065Z,1516399557.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:57.461Z,1516399557.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:57.476Z,1516399557.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:57.859Z,1516399557.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:57.879Z,1516399557.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:58.262Z,1516399558.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:58.283Z,1516399558.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:58.649Z,1516399558.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:58.664Z,1516399558.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:59.045Z,1516399559.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:59.071Z,1516399559.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:59.466Z,1516399559.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:59.487Z,1516399559.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:05:59.858Z,1516399559.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:05:59.872Z,1516399559.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:00.262Z,1516399560.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:00.276Z,1516399560.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:00.650Z,1516399560.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:00.671Z,1516399560.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:01.055Z,1516399561.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:01.069Z,1516399561.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:01.462Z,1516399561.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:01.476Z,1516399561.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:01.866Z,1516399561.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:01.880Z,1516399561.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:02.265Z,1516399562.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:02.287Z,1516399562.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:02.656Z,1516399562.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:02.670Z,1516399562.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:03.046Z,1516399563.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:03.077Z,1516399563.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:03.462Z,1516399563.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:03.476Z,1516399563.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:03.864Z,1516399563.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:03.883Z,1516399563.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:04.262Z,1516399564.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:04.276Z,1516399564.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:04.649Z,1516399564.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:04.670Z,1516399564.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:05.063Z,1516399565.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:05.083Z,1516399565.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:05.453Z,1516399565.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:05.467Z,1516399565.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:05.855Z,1516399565.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:05.881Z,1516399565.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:06.266Z,1516399566.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:06.280Z,1516399566.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:06.671Z,1516399566.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:06.687Z,1516399566.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:07.055Z,1516399567.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:07.070Z,1516399567.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:07.443Z,1516399567.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:07.466Z,1516399567.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:07.860Z,1516399567.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:07.875Z,1516399567.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:08.244Z,1516399568.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:08.269Z,1516399568.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:08.663Z,1516399568.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:08.677Z,1516399568.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:09.062Z,1516399569.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:09.094Z,1516399569.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:09.467Z,1516399569.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:09.482Z,1516399569.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:09.843Z,1516399569.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:09.869Z,1516399569.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:10.243Z,1516399570.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:10.271Z,1516399570.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:10.639Z,1516399570.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:10.671Z,1516399570.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:11.044Z,1516399571.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:11.078Z,1516399571.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:11.447Z,1516399571.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:11.479Z,1516399571.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:11.858Z,1516399571.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:11.872Z,1516399571.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:12.266Z,1516399572.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:12.280Z,1516399572.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:12.663Z,1516399572.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:12.680Z,1516399572.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:13.039Z,1516399573.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:13.070Z,1516399573.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:13.443Z,1516399573.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:13.469Z,1516399573.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:13.844Z,1516399573.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:13.879Z,1516399573.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:14.247Z,1516399574.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:14.278Z,1516399574.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:14.668Z,1516399574.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:14.682Z,1516399574.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:15.054Z,1516399575.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:15.091Z,1516399575.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:15.458Z,1516399575.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:15.484Z,1516399575.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:15.852Z,1516399575.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:15.887Z,1516399575.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:16.248Z,1516399576.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:16.262Z,1516399576.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:16.652Z,1516399576.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:16.691Z,1516399576.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:17.050Z,1516399577.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:17.064Z,1516399577.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:17.451Z,1516399577.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:17.466Z,1516399577.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:17.850Z,1516399577.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:17.865Z,1516399577.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:18.263Z,1516399578.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:18.293Z,1516399578.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:18.661Z,1516399578.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:18.688Z,1516399578.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:19.054Z,1516399579.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:19.068Z,1516399579.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:19.454Z,1516399579.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:19.468Z,1516399579.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:19.854Z,1516399579.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:19.867Z,1516399579.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:20.253Z,1516399580.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:20.267Z,1516399580.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:20.663Z,1516399580.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:20.695Z,1516399580.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:21.066Z,1516399581.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:21.098Z,1516399581.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:21.467Z,1516399581.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:21.495Z,1516399581.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:21.848Z,1516399581.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:21.867Z,1516399581.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:22.248Z,1516399582.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:22.263Z,1516399582.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:22.647Z,1516399582.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:22.661Z,1516399582.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:23.053Z,1516399583.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:23.067Z,1516399583.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:23.448Z,1516399583.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:23.462Z,1516399583.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:23.866Z,1516399583.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:23.897Z,1516399583.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:24.262Z,1516399584.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:24.276Z,1516399584.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:24.658Z,1516399584.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:24.678Z,1516399584.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:25.049Z,1516399585.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:25.063Z,1516399585.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:25.455Z,1516399585.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:25.469Z,1516399585.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:25.856Z,1516399585.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:25.870Z,1516399585.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:26.255Z,1516399586.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:26.269Z,1516399586.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:26.656Z,1516399586.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:26.675Z,1516399586.675 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:26.675Z,1516399586.675 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-01-19T22:06:26.675Z,1516399586.675 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:06:26.677Z,1516399586.677 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:26.677Z,1516399586.677 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-01-19T22:06:26.677Z,1516399586.677 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:06:26.679Z,1516399586.679 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:26.679Z,1516399586.679 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-01-19T22:06:26.679Z,1516399586.679 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:06:26.711Z,1516399586.711 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:06:26.711Z,1516399586.711 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:06:26.712Z,1516399586.712 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:06:27.062Z,1516399587.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:27.121Z,1516399587.121 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:06:27.121Z,1516399587.121 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-01-19T22:06:27.122Z,1516399587.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:06:27.122Z,1516399587.122 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-01-19T22:06:27.122Z,1516399587.122 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:06:27.122Z,1516399587.122 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-01-19T22:06:27.460Z,1516399587.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:27.478Z,1516399587.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:06:27.478Z,1516399587.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:06:27.478Z,1516399587.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:06:27.479Z,1516399587.479 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:06:27.479Z,1516399587.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:06:27.479Z,1516399587.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:06:27.480Z,1516399587.480 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:06:27.480Z,1516399587.480 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:06:27.481Z,1516399587.481 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:06:27.843Z,1516399587.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:27.874Z,1516399587.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:06:27.875Z,1516399587.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:28.239Z,1516399588.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:28.265Z,1516399588.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:06:28.266Z,1516399588.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:28.654Z,1516399588.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:28.674Z,1516399588.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:06:28.675Z,1516399588.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:29.044Z,1516399589.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:29.074Z,1516399589.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:06:29.075Z,1516399589.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:29.444Z,1516399589.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:29.478Z,1516399589.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:06:29.479Z,1516399589.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:32.603Z,1516399592.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:32.622Z,1516399592.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-01-19T22:06:32.623Z,1516399592.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:32.738Z,1516399592.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:32.771Z,1516399592.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-01-19T22:06:32.772Z,1516399592.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:33.092Z,1516399593.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:33.115Z,1516399593.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T22:06:33.116Z,1516399593.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:33.479Z,1516399593.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:33.493Z,1516399593.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:06:33.494Z,1516399593.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:33.873Z,1516399593.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:33.887Z,1516399593.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:06:33.888Z,1516399593.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:34.278Z,1516399594.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:34.314Z,1516399594.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:06:34.315Z,1516399594.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:34.690Z,1516399594.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:34.722Z,1516399594.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:06:34.723Z,1516399594.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:35.086Z,1516399595.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:35.100Z,1516399595.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:06:35.117Z,1516399595.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:35.494Z,1516399595.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:35.523Z,1516399595.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:06:35.524Z,1516399595.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:35.879Z,1516399595.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:35.914Z,1516399595.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:06:35.915Z,1516399595.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:36.276Z,1516399596.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:36.290Z,1516399596.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T22:06:36.291Z,1516399596.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:36.680Z,1516399596.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:36.702Z,1516399596.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:06:36.703Z,1516399596.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:37.080Z,1516399597.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:37.094Z,1516399597.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:06:37.095Z,1516399597.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:37.477Z,1516399597.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:37.495Z,1516399597.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:06:37.496Z,1516399597.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:37.882Z,1516399597.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:37.896Z,1516399597.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:06:37.897Z,1516399597.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:38.286Z,1516399598.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:38.299Z,1516399598.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:06:38.300Z,1516399598.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:38.683Z,1516399598.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:38.699Z,1516399598.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T22:06:38.700Z,1516399598.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:39.074Z,1516399599.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:39.104Z,1516399599.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T22:06:39.105Z,1516399599.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:39.480Z,1516399599.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:39.498Z,1516399599.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T22:06:39.499Z,1516399599.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:39.884Z,1516399599.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:39.898Z,1516399599.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T22:06:39.899Z,1516399599.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:40.278Z,1516399600.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:40.298Z,1516399600.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T22:06:40.299Z,1516399600.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:40.690Z,1516399600.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:40.710Z,1516399600.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T22:06:40.711Z,1516399600.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:41.088Z,1516399601.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:41.106Z,1516399601.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T22:06:41.107Z,1516399601.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:41.488Z,1516399601.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:41.506Z,1516399601.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:06:41.507Z,1516399601.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:41.884Z,1516399601.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:41.906Z,1516399601.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:06:41.907Z,1516399601.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:42.277Z,1516399602.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:42.291Z,1516399602.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T22:06:42.292Z,1516399602.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:42.681Z,1516399602.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:42.695Z,1516399602.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T22:06:42.696Z,1516399602.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:43.088Z,1516399603.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:43.105Z,1516399603.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T22:06:43.106Z,1516399603.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:43.470Z,1516399603.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:43.493Z,1516399603.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T22:06:43.494Z,1516399603.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:43.890Z,1516399603.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:43.904Z,1516399603.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T22:06:43.905Z,1516399603.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:44.290Z,1516399604.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:44.303Z,1516399604.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T22:06:44.304Z,1516399604.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:44.689Z,1516399604.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:44.710Z,1516399604.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T22:06:44.711Z,1516399604.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:45.084Z,1516399605.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:45.098Z,1516399605.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T22:06:45.099Z,1516399605.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:45.478Z,1516399605.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:45.501Z,1516399605.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T22:06:45.502Z,1516399605.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:45.868Z,1516399605.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:45.905Z,1516399605.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T22:06:45.906Z,1516399605.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:46.284Z,1516399606.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:46.298Z,1516399606.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T22:06:46.298Z,1516399606.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:46.695Z,1516399606.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:46.712Z,1516399606.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:47.094Z,1516399607.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:47.108Z,1516399607.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:47.493Z,1516399607.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:47.515Z,1516399607.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:47.885Z,1516399607.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:47.900Z,1516399607.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:48.271Z,1516399608.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:48.305Z,1516399608.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:48.672Z,1516399608.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:48.703Z,1516399608.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:49.086Z,1516399609.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:49.101Z,1516399609.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:49.467Z,1516399609.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:49.499Z,1516399609.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:49.890Z,1516399609.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:49.904Z,1516399609.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:50.294Z,1516399610.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:50.308Z,1516399610.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:50.694Z,1516399610.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:50.708Z,1516399610.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:51.071Z,1516399611.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:51.103Z,1516399611.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:51.471Z,1516399611.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:51.512Z,1516399611.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:51.887Z,1516399611.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:51.901Z,1516399611.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:52.271Z,1516399612.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:52.296Z,1516399612.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:52.698Z,1516399612.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:52.713Z,1516399612.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:53.096Z,1516399613.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:53.115Z,1516399613.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:53.496Z,1516399613.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:53.510Z,1516399613.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:53.892Z,1516399613.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:53.911Z,1516399613.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:54.282Z,1516399614.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:54.301Z,1516399614.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:54.671Z,1516399614.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:54.707Z,1516399614.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:55.086Z,1516399615.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:55.100Z,1516399615.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:55.472Z,1516399615.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:55.503Z,1516399615.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:55.900Z,1516399615.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:55.919Z,1516399615.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:56.296Z,1516399616.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:56.310Z,1516399616.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:56.685Z,1516399616.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:56.708Z,1516399616.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:57.072Z,1516399617.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:57.103Z,1516399617.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:57.466Z,1516399617.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:57.491Z,1516399617.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:57.876Z,1516399617.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:57.902Z,1516399617.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:58.271Z,1516399618.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:58.304Z,1516399618.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:58.678Z,1516399618.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:58.715Z,1516399618.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:59.099Z,1516399619.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:59.113Z,1516399619.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:59.482Z,1516399619.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:59.519Z,1516399619.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:06:59.875Z,1516399619.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:06:59.913Z,1516399619.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:00.275Z,1516399620.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:00.315Z,1516399620.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:00.679Z,1516399620.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:00.714Z,1516399620.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:01.077Z,1516399621.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:01.090Z,1516399621.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:01.473Z,1516399621.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:01.494Z,1516399621.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:01.890Z,1516399621.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:01.924Z,1516399621.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:02.290Z,1516399622.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:02.324Z,1516399622.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:02.683Z,1516399622.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:02.697Z,1516399622.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:03.081Z,1516399623.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:03.095Z,1516399623.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:03.480Z,1516399623.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:03.495Z,1516399623.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:03.878Z,1516399623.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:03.893Z,1516399623.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:04.280Z,1516399624.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:04.295Z,1516399624.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:04.695Z,1516399624.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:04.718Z,1516399624.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:05.090Z,1516399625.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:05.119Z,1516399625.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:05.486Z,1516399625.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:05.500Z,1516399625.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:05.875Z,1516399625.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:05.889Z,1516399625.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:06.274Z,1516399626.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:06.288Z,1516399626.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:06.676Z,1516399626.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:06.695Z,1516399626.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:07.081Z,1516399627.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:07.095Z,1516399627.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:07.480Z,1516399627.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:07.495Z,1516399627.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:07.886Z,1516399627.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:07.900Z,1516399627.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:08.294Z,1516399628.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:08.325Z,1516399628.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:08.682Z,1516399628.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:08.696Z,1516399628.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:09.085Z,1516399629.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:09.100Z,1516399629.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:09.480Z,1516399629.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:09.494Z,1516399629.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:09.881Z,1516399629.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:09.895Z,1516399629.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:10.277Z,1516399630.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:10.295Z,1516399630.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:10.694Z,1516399630.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:10.708Z,1516399630.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:11.094Z,1516399631.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:11.126Z,1516399631.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:11.482Z,1516399631.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:11.496Z,1516399631.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:11.876Z,1516399631.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:11.890Z,1516399631.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:12.280Z,1516399632.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:12.299Z,1516399632.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:12.680Z,1516399632.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:12.699Z,1516399632.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:13.081Z,1516399633.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:13.095Z,1516399633.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:13.480Z,1516399633.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:13.495Z,1516399633.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:13.894Z,1516399633.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:13.926Z,1516399633.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:14.294Z,1516399634.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:14.308Z,1516399634.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:14.682Z,1516399634.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:14.696Z,1516399634.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:15.074Z,1516399635.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:15.102Z,1516399635.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:15.484Z,1516399635.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:15.498Z,1516399635.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:15.883Z,1516399635.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:15.903Z,1516399635.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:16.279Z,1516399636.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:16.293Z,1516399636.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:16.685Z,1516399636.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:16.699Z,1516399636.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:17.090Z,1516399637.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:17.105Z,1516399637.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:17.487Z,1516399637.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:17.503Z,1516399637.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:17.884Z,1516399637.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:17.900Z,1516399637.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:18.282Z,1516399638.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:18.296Z,1516399638.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:18.683Z,1516399638.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:18.700Z,1516399638.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:19.087Z,1516399639.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:19.101Z,1516399639.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:19.485Z,1516399639.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:19.500Z,1516399639.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:19.886Z,1516399639.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:19.901Z,1516399639.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:20.286Z,1516399640.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:20.314Z,1516399640.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:20.688Z,1516399640.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:20.703Z,1516399640.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:21.079Z,1516399641.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:21.093Z,1516399641.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:21.475Z,1516399641.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:21.494Z,1516399641.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:21.884Z,1516399641.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:21.899Z,1516399641.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:22.279Z,1516399642.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:22.293Z,1516399642.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:22.686Z,1516399642.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:22.700Z,1516399642.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:23.090Z,1516399643.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:23.107Z,1516399643.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:23.488Z,1516399643.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:23.503Z,1516399643.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:23.877Z,1516399643.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:23.891Z,1516399643.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:24.284Z,1516399644.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:24.298Z,1516399644.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:24.680Z,1516399644.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:24.710Z,1516399644.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:25.076Z,1516399645.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:25.103Z,1516399645.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:25.475Z,1516399645.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:25.502Z,1516399645.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:25.895Z,1516399645.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:25.915Z,1516399645.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:26.299Z,1516399646.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:26.313Z,1516399646.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:26.699Z,1516399646.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:26.715Z,1516399646.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:27.080Z,1516399647.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:27.105Z,1516399647.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:27.467Z,1516399647.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:27.504Z,1516399647.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:27.877Z,1516399647.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:27.902Z,1516399647.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:28.271Z,1516399648.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:28.306Z,1516399648.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:28.678Z,1516399648.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:28.712Z,1516399648.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:29.094Z,1516399649.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:29.109Z,1516399649.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:29.486Z,1516399649.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:29.508Z,1516399649.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:32.659Z,1516399652.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:32.673Z,1516399652.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:32.776Z,1516399652.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:32.803Z,1516399652.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:33.158Z,1516399653.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:33.172Z,1516399653.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:33.570Z,1516399653.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:33.583Z,1516399653.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:33.959Z,1516399653.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:33.979Z,1516399653.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:34.355Z,1516399654.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:34.370Z,1516399654.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:34.748Z,1516399654.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:34.767Z,1516399654.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:35.155Z,1516399655.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:35.175Z,1516399655.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:35.554Z,1516399655.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:35.569Z,1516399655.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:35.959Z,1516399655.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:35.973Z,1516399655.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:36.362Z,1516399656.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:36.377Z,1516399656.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:36.758Z,1516399656.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:36.772Z,1516399656.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:37.155Z,1516399657.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:37.169Z,1516399657.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:37.555Z,1516399657.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:37.569Z,1516399657.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:37.952Z,1516399657.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:37.977Z,1516399657.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:38.356Z,1516399658.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:38.369Z,1516399658.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:38.758Z,1516399658.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:38.773Z,1516399658.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:39.162Z,1516399659.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:39.176Z,1516399659.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:39.559Z,1516399659.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:39.573Z,1516399659.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:39.956Z,1516399659.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:39.970Z,1516399659.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:40.355Z,1516399660.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:40.370Z,1516399660.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:40.749Z,1516399660.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:40.775Z,1516399660.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:41.153Z,1516399661.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:41.167Z,1516399661.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:41.555Z,1516399661.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:41.570Z,1516399661.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:41.959Z,1516399661.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:41.978Z,1516399661.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:42.362Z,1516399662.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:42.376Z,1516399662.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:42.758Z,1516399662.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:42.772Z,1516399662.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:43.158Z,1516399663.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:43.172Z,1516399663.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:43.548Z,1516399663.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:43.569Z,1516399663.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:43.952Z,1516399663.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:43.974Z,1516399663.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:44.348Z,1516399664.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:44.363Z,1516399664.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:44.759Z,1516399664.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:44.773Z,1516399664.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:45.162Z,1516399665.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:45.177Z,1516399665.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:45.558Z,1516399665.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:45.578Z,1516399665.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:45.941Z,1516399665.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:45.963Z,1516399665.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:46.355Z,1516399666.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:46.370Z,1516399666.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:46.749Z,1516399666.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:46.763Z,1516399666.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:47.152Z,1516399667.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:47.170Z,1516399667.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:47.555Z,1516399667.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:47.575Z,1516399667.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:47.959Z,1516399667.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:47.973Z,1516399667.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:48.360Z,1516399668.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:48.374Z,1516399668.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:48.759Z,1516399668.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:48.773Z,1516399668.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:49.155Z,1516399669.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:49.169Z,1516399669.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:49.554Z,1516399669.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:49.568Z,1516399669.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:49.956Z,1516399669.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:50.008Z,1516399670.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:50.355Z,1516399670.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:50.370Z,1516399670.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:50.755Z,1516399670.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:50.772Z,1516399670.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:51.162Z,1516399671.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:51.177Z,1516399671.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:51.558Z,1516399671.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:51.579Z,1516399671.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:51.941Z,1516399671.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:51.963Z,1516399671.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:52.347Z,1516399672.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:52.370Z,1516399672.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:52.755Z,1516399672.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:52.769Z,1516399672.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:53.159Z,1516399673.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:53.173Z,1516399673.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:53.546Z,1516399673.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:53.568Z,1516399673.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:53.959Z,1516399673.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:53.973Z,1516399673.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:54.362Z,1516399674.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:54.376Z,1516399674.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:54.765Z,1516399674.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:54.779Z,1516399674.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:55.155Z,1516399675.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:55.170Z,1516399675.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:55.549Z,1516399675.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:55.566Z,1516399675.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:55.948Z,1516399675.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:55.970Z,1516399675.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:56.353Z,1516399676.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:56.370Z,1516399676.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:56.761Z,1516399676.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:56.776Z,1516399676.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:57.162Z,1516399677.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:57.188Z,1516399677.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:57.566Z,1516399677.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:57.586Z,1516399677.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:57.937Z,1516399677.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:57.962Z,1516399677.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:58.346Z,1516399678.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:58.377Z,1516399678.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:58.755Z,1516399678.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:58.769Z,1516399678.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:59.156Z,1516399679.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:59.170Z,1516399679.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:59.546Z,1516399679.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:59.577Z,1516399679.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:07:59.966Z,1516399679.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:07:59.980Z,1516399679.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:00.361Z,1516399680.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:00.375Z,1516399680.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:00.765Z,1516399680.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:00.787Z,1516399680.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:01.155Z,1516399681.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:01.169Z,1516399681.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:01.537Z,1516399681.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:01.570Z,1516399681.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:01.948Z,1516399681.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:01.970Z,1516399681.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:02.352Z,1516399682.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:02.366Z,1516399682.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:02.754Z,1516399682.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:02.781Z,1516399682.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:03.168Z,1516399683.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:03.187Z,1516399683.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:03.566Z,1516399683.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:03.580Z,1516399683.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:03.941Z,1516399683.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:03.968Z,1516399683.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:04.347Z,1516399684.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:04.372Z,1516399684.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:04.742Z,1516399684.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:04.774Z,1516399684.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:05.148Z,1516399685.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:05.173Z,1516399685.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:05.543Z,1516399685.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:05.568Z,1516399685.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:05.963Z,1516399685.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:05.977Z,1516399685.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:06.366Z,1516399686.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:06.387Z,1516399686.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:06.766Z,1516399686.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:06.780Z,1516399686.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:07.143Z,1516399687.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:07.171Z,1516399687.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:07.547Z,1516399687.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:07.572Z,1516399687.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:07.944Z,1516399687.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:07.970Z,1516399687.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:08.339Z,1516399688.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:08.371Z,1516399688.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:08.762Z,1516399688.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:08.776Z,1516399688.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:09.172Z,1516399689.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:09.191Z,1516399689.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:09.566Z,1516399689.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:09.580Z,1516399689.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:09.941Z,1516399689.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:09.975Z,1516399689.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:10.347Z,1516399690.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:10.373Z,1516399690.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:10.743Z,1516399690.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:10.776Z,1516399690.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:11.148Z,1516399691.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:11.177Z,1516399691.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:11.543Z,1516399691.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:11.572Z,1516399691.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:11.962Z,1516399691.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:11.982Z,1516399691.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:12.370Z,1516399692.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:12.387Z,1516399692.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:12.758Z,1516399692.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:12.780Z,1516399692.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:13.139Z,1516399693.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:13.175Z,1516399693.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:13.548Z,1516399693.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:13.573Z,1516399693.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:13.945Z,1516399693.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:13.980Z,1516399693.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:14.343Z,1516399694.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:14.366Z,1516399694.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:14.750Z,1516399694.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:14.777Z,1516399694.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:15.166Z,1516399695.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:15.187Z,1516399695.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:15.567Z,1516399695.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:15.582Z,1516399695.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:15.942Z,1516399695.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:15.956Z,1516399695.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:16.343Z,1516399696.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:16.379Z,1516399696.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:16.751Z,1516399696.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:16.789Z,1516399696.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:17.152Z,1516399697.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:17.182Z,1516399697.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:17.544Z,1516399697.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:17.563Z,1516399697.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:17.962Z,1516399697.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:17.990Z,1516399697.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:18.350Z,1516399698.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:18.364Z,1516399698.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:18.762Z,1516399698.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:18.785Z,1516399698.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:19.147Z,1516399699.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:19.161Z,1516399699.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:19.545Z,1516399699.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:19.559Z,1516399699.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:19.950Z,1516399699.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:19.989Z,1516399699.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:20.352Z,1516399700.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:20.365Z,1516399700.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:20.761Z,1516399700.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:20.780Z,1516399700.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:21.163Z,1516399701.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:21.178Z,1516399701.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:21.565Z,1516399701.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:21.622Z,1516399701.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:21.954Z,1516399701.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:21.985Z,1516399701.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:22.355Z,1516399702.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:22.382Z,1516399702.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:22.745Z,1516399702.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:22.772Z,1516399702.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:23.146Z,1516399703.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:23.176Z,1516399703.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:23.553Z,1516399703.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:23.587Z,1516399703.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:23.956Z,1516399703.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:24.020Z,1516399704.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:24.368Z,1516399704.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:24.399Z,1516399704.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:24.756Z,1516399704.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:24.784Z,1516399704.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:25.149Z,1516399705.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:25.166Z,1516399705.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:25.541Z,1516399705.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:25.555Z,1516399705.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:25.953Z,1516399705.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:25.988Z,1516399705.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:26.348Z,1516399706.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:26.362Z,1516399706.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:26.754Z,1516399706.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:26.785Z,1516399706.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:27.162Z,1516399707.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:27.192Z,1516399707.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:27.562Z,1516399707.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:27.596Z,1516399707.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:27.949Z,1516399707.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:27.964Z,1516399707.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:28.348Z,1516399708.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:28.372Z,1516399708.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:28.752Z,1516399708.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:28.767Z,1516399708.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:29.154Z,1516399709.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:29.169Z,1516399709.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:29.550Z,1516399709.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:29.569Z,1516399709.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:32.670Z,1516399712.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:32.693Z,1516399712.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:32.803Z,1516399712.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:32.818Z,1516399712.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:33.154Z,1516399713.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:33.168Z,1516399713.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:33.557Z,1516399713.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:33.571Z,1516399713.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:33.953Z,1516399713.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:33.968Z,1516399713.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:34.352Z,1516399714.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:34.371Z,1516399714.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:34.754Z,1516399714.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:34.768Z,1516399714.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:35.166Z,1516399715.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:35.196Z,1516399715.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:35.566Z,1516399715.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:35.595Z,1516399715.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:35.953Z,1516399715.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:35.967Z,1516399715.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:36.349Z,1516399716.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:36.363Z,1516399716.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:36.752Z,1516399716.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:36.771Z,1516399716.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:37.153Z,1516399717.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:37.167Z,1516399717.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:37.547Z,1516399717.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:37.567Z,1516399717.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:37.966Z,1516399717.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:37.994Z,1516399717.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:38.366Z,1516399718.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:38.397Z,1516399718.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:38.751Z,1516399718.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:38.771Z,1516399718.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:39.152Z,1516399719.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:39.171Z,1516399719.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:39.552Z,1516399719.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:39.612Z,1516399719.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:39.987Z,1516399719.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:40.002Z,1516399720.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:40.357Z,1516399720.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:40.371Z,1516399720.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:40.761Z,1516399720.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:40.826Z,1516399720.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:41.167Z,1516399721.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:41.205Z,1516399721.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:41.564Z,1516399721.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:41.583Z,1516399721.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:41.946Z,1516399721.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:42.015Z,1516399722.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:42.343Z,1516399722.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:42.390Z,1516399722.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:42.764Z,1516399722.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:42.791Z,1516399722.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:43.169Z,1516399723.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:43.227Z,1516399723.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:43.556Z,1516399723.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:43.586Z,1516399723.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:43.946Z,1516399723.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:43.987Z,1516399723.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:44.354Z,1516399724.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:44.404Z,1516399724.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:44.764Z,1516399724.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:44.783Z,1516399724.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:45.169Z,1516399725.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:45.239Z,1516399725.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:45.569Z,1516399725.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:45.617Z,1516399725.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:45.954Z,1516399725.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:45.986Z,1516399725.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:46.345Z,1516399726.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:46.371Z,1516399726.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:46.744Z,1516399726.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:46.791Z,1516399726.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:47.149Z,1516399727.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:47.187Z,1516399727.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:47.545Z,1516399727.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:47.575Z,1516399727.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:47.965Z,1516399727.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:47.988Z,1516399727.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:48.369Z,1516399728.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:48.392Z,1516399728.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:48.760Z,1516399728.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:48.788Z,1516399728.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:49.150Z,1516399729.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:49.164Z,1516399729.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:49.546Z,1516399729.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:49.560Z,1516399729.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:49.953Z,1516399729.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:49.967Z,1516399729.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:50.354Z,1516399730.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:50.368Z,1516399730.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:50.754Z,1516399730.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:50.770Z,1516399730.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:51.166Z,1516399731.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:51.196Z,1516399731.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:51.567Z,1516399731.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:51.596Z,1516399731.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:51.945Z,1516399731.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:51.963Z,1516399731.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:52.351Z,1516399732.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:52.370Z,1516399732.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:52.770Z,1516399732.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:52.794Z,1516399732.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:53.158Z,1516399733.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:53.172Z,1516399733.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:53.566Z,1516399733.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:53.596Z,1516399733.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:53.957Z,1516399733.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:53.972Z,1516399733.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:54.352Z,1516399734.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:54.367Z,1516399734.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:54.766Z,1516399734.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:54.795Z,1516399734.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:55.159Z,1516399735.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:55.196Z,1516399735.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:55.555Z,1516399735.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:55.586Z,1516399735.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:55.956Z,1516399735.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:55.971Z,1516399735.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:56.356Z,1516399736.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:56.371Z,1516399736.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:56.762Z,1516399736.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:56.776Z,1516399736.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:57.162Z,1516399737.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:57.176Z,1516399737.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:57.562Z,1516399737.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:57.577Z,1516399737.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:57.956Z,1516399737.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:57.971Z,1516399737.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:58.359Z,1516399738.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:58.373Z,1516399738.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:58.759Z,1516399738.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:58.782Z,1516399738.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:59.162Z,1516399739.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:59.177Z,1516399739.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:59.562Z,1516399739.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:59.576Z,1516399739.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:08:59.963Z,1516399739.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:08:59.977Z,1516399739.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:00.344Z,1516399740.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:00.367Z,1516399740.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:00.767Z,1516399740.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:00.787Z,1516399740.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:01.167Z,1516399741.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:01.181Z,1516399741.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:01.570Z,1516399741.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:01.584Z,1516399741.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:01.961Z,1516399741.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:01.975Z,1516399741.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:02.352Z,1516399742.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:02.367Z,1516399742.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:02.761Z,1516399742.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:02.776Z,1516399742.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:03.167Z,1516399743.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:03.187Z,1516399743.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:03.571Z,1516399743.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:03.586Z,1516399743.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:03.951Z,1516399743.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:03.973Z,1516399743.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:04.349Z,1516399744.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:04.371Z,1516399744.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:04.764Z,1516399744.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:04.795Z,1516399744.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:05.170Z,1516399745.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:05.184Z,1516399745.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:05.566Z,1516399745.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:05.580Z,1516399745.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:05.954Z,1516399745.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:05.968Z,1516399745.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:06.340Z,1516399746.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:06.375Z,1516399746.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:06.770Z,1516399746.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:06.777Z,1516399746.777 [PNI_TCM](ERROR): CRC does not match. Expected:0x14753 got:0x39589
2018-01-19T22:09:06.811Z,1516399746.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:07.165Z,1516399747.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:07.179Z,1516399747.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:07.566Z,1516399747.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:07.580Z,1516399747.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:07.960Z,1516399747.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:07.977Z,1516399747.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:08.339Z,1516399748.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:08.371Z,1516399748.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:08.769Z,1516399748.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:08.783Z,1516399748.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:09.165Z,1516399749.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:09.187Z,1516399749.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:09.568Z,1516399749.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:09.586Z,1516399749.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:09.951Z,1516399749.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:09.973Z,1516399749.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:10.349Z,1516399750.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:10.372Z,1516399750.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:10.760Z,1516399750.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:10.775Z,1516399750.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:10.788Z,1516399750.788 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T22:09:11.167Z,1516399751.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:11.183Z,1516399751.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:11.564Z,1516399751.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:11.583Z,1516399751.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:11.958Z,1516399751.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:11.972Z,1516399751.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:12.349Z,1516399752.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:12.369Z,1516399752.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:12.761Z,1516399752.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:12.780Z,1516399752.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:13.168Z,1516399753.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:13.182Z,1516399753.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:13.570Z,1516399753.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:13.584Z,1516399753.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:13.951Z,1516399753.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:13.974Z,1516399753.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:14.339Z,1516399754.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:14.374Z,1516399754.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:14.766Z,1516399754.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:14.780Z,1516399754.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:15.168Z,1516399755.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:15.183Z,1516399755.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:15.569Z,1516399755.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:15.583Z,1516399755.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:15.956Z,1516399755.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:15.991Z,1516399755.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:16.355Z,1516399756.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:16.374Z,1516399756.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:16.762Z,1516399756.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:16.776Z,1516399756.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:17.168Z,1516399757.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:17.183Z,1516399757.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:17.561Z,1516399757.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:17.607Z,1516399757.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:17.957Z,1516399757.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:17.976Z,1516399757.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:18.357Z,1516399758.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:18.373Z,1516399758.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:18.767Z,1516399758.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:18.781Z,1516399758.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:19.162Z,1516399759.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:19.188Z,1516399759.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:19.561Z,1516399759.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:19.580Z,1516399759.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:19.967Z,1516399759.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:19.981Z,1516399759.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:20.339Z,1516399760.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:20.376Z,1516399760.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:20.766Z,1516399760.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:20.811Z,1516399760.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:21.171Z,1516399761.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:21.187Z,1516399761.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:21.570Z,1516399761.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:21.583Z,1516399761.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:21.960Z,1516399761.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:21.975Z,1516399761.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:22.360Z,1516399762.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:22.395Z,1516399762.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:22.741Z,1516399762.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:22.767Z,1516399762.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:23.169Z,1516399763.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:23.183Z,1516399763.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:23.567Z,1516399763.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:23.585Z,1516399763.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:23.966Z,1516399763.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:24.012Z,1516399764.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:24.354Z,1516399764.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:24.369Z,1516399764.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:24.743Z,1516399764.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:24.780Z,1516399764.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:25.148Z,1516399765.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:25.179Z,1516399765.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:25.547Z,1516399765.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:25.595Z,1516399765.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:25.967Z,1516399765.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:25.986Z,1516399765.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:26.374Z,1516399766.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:26.388Z,1516399766.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:26.771Z,1516399766.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:26.785Z,1516399766.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:27.159Z,1516399767.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:27.196Z,1516399767.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:27.544Z,1516399767.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:27.570Z,1516399767.570 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:27.570Z,1516399767.570 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-01-19T22:09:27.571Z,1516399767.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:09:27.572Z,1516399767.572 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:27.572Z,1516399767.572 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-01-19T22:09:27.572Z,1516399767.572 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:09:27.574Z,1516399767.574 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:27.574Z,1516399767.574 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-01-19T22:09:27.574Z,1516399767.574 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:09:27.591Z,1516399767.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:09:27.591Z,1516399767.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:09:27.592Z,1516399767.592 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:09:27.944Z,1516399767.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:28.001Z,1516399768.001 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:09:28.001Z,1516399768.001 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-01-19T22:09:28.001Z,1516399768.001 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:09:28.001Z,1516399768.001 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-01-19T22:09:28.002Z,1516399768.002 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:09:28.002Z,1516399768.002 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-01-19T22:09:28.344Z,1516399768.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:28.382Z,1516399768.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:09:28.382Z,1516399768.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:09:28.383Z,1516399768.383 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:09:28.383Z,1516399768.383 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:09:28.384Z,1516399768.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:09:28.384Z,1516399768.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:09:28.384Z,1516399768.384 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:09:28.385Z,1516399768.385 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:09:28.385Z,1516399768.385 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:09:28.749Z,1516399768.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:28.782Z,1516399768.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:09:28.783Z,1516399768.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:29.159Z,1516399769.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:29.190Z,1516399769.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:09:29.191Z,1516399769.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:29.194Z,1516399769.194 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T22:04:29.0Z
2018-01-19T22:09:29.194Z,1516399769.194 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T22:09:29.194Z,1516399769.194 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T22:09:29.578Z,1516399769.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:29.592Z,1516399769.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:09:29.593Z,1516399769.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:32.724Z,1516399772.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:32.738Z,1516399772.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T22:09:32.739Z,1516399772.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:32.825Z,1516399772.825 [DataOverHttps](INFO): Sending 93 bytes from file Logs/20180119T210901/Courier0024.lzma
2018-01-19T22:09:32.853Z,1516399772.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:32.879Z,1516399772.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-01-19T22:09:32.880Z,1516399772.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:33.206Z,1516399773.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:33.220Z,1516399773.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T22:09:33.221Z,1516399773.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:33.575Z,1516399773.575 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0024.lzma.bak
2018-01-19T22:09:33.575Z,1516399773.575 [DataOverHttps](INFO): SBD MOMSN=7724364
2018-01-19T22:09:33.619Z,1516399773.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:33.648Z,1516399773.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-01-19T22:09:33.649Z,1516399773.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:34.098Z,1516399774.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:34.118Z,1516399774.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-01-19T22:09:34.119Z,1516399774.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:34.409Z,1516399774.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:34.422Z,1516399774.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-01-19T22:09:34.423Z,1516399774.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:37.511Z,1516399777.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:37.525Z,1516399777.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:09:37.526Z,1516399777.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:37.635Z,1516399777.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:37.666Z,1516399777.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-01-19T22:09:37.669Z,1516399777.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:38.022Z,1516399778.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:38.036Z,1516399778.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-01-19T22:09:38.057Z,1516399778.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:38.414Z,1516399778.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:38.427Z,1516399778.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-01-19T22:09:38.428Z,1516399778.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:38.805Z,1516399778.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:38.824Z,1516399778.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-01-19T22:09:38.825Z,1516399778.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:39.207Z,1516399779.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:39.221Z,1516399779.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-01-19T22:09:39.222Z,1516399779.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:42.301Z,1516399782.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:42.315Z,1516399782.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-01-19T22:09:42.316Z,1516399782.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:42.401Z,1516399782.401 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20180119T210901/Express0025.lzma
2018-01-19T22:09:42.434Z,1516399782.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:42.464Z,1516399782.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-19T22:09:42.469Z,1516399782.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:42.789Z,1516399782.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:42.813Z,1516399782.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:09:42.814Z,1516399782.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:43.143Z,1516399783.143 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0025.lzma.bak
2018-01-19T22:09:43.144Z,1516399783.144 [DataOverHttps](INFO): SBD MOMSN=7724367
2018-01-19T22:09:43.204Z,1516399783.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:43.238Z,1516399783.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-19T22:09:43.239Z,1516399783.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:43.662Z,1516399783.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:43.669Z,1516399783.669 [PNI_TCM](ERROR): CRC does not match. Expected:0x47643 got:0x6336
2018-01-19T22:09:43.695Z,1516399783.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-19T22:09:43.696Z,1516399783.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:43.715Z,1516399783.715 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T22:09:43.715Z,1516399783.715 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T22:09:43.715Z,1516399783.715 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T22:09:43.974Z,1516399783.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:44.014Z,1516399784.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T22:09:44.015Z,1516399784.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:47.071Z,1516399787.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:47.085Z,1516399787.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-01-19T22:09:47.086Z,1516399787.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:47.179Z,1516399787.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:47.223Z,1516399787.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-19T22:09:47.224Z,1516399787.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:47.557Z,1516399787.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:47.571Z,1516399787.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:47.963Z,1516399787.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:47.977Z,1516399787.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:48.342Z,1516399788.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:48.362Z,1516399788.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:48.739Z,1516399788.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:48.769Z,1516399788.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:49.137Z,1516399789.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:49.163Z,1516399789.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:49.536Z,1516399789.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:49.551Z,1516399789.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:49.950Z,1516399789.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:49.974Z,1516399789.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:50.365Z,1516399790.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:50.380Z,1516399790.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:50.746Z,1516399790.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:50.776Z,1516399790.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:51.136Z,1516399791.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:51.155Z,1516399791.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:51.536Z,1516399791.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:51.550Z,1516399791.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:51.928Z,1516399791.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:51.955Z,1516399791.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:52.341Z,1516399792.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:52.355Z,1516399792.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:52.740Z,1516399792.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:52.754Z,1516399792.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:53.150Z,1516399793.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:53.164Z,1516399793.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:53.554Z,1516399793.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:53.568Z,1516399793.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:53.946Z,1516399793.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:53.966Z,1516399793.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:54.329Z,1516399794.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:54.350Z,1516399794.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:54.738Z,1516399794.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:54.752Z,1516399794.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:55.141Z,1516399795.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:55.154Z,1516399795.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:55.536Z,1516399795.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:55.554Z,1516399795.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:55.944Z,1516399795.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:55.963Z,1516399795.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:56.350Z,1516399796.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:56.364Z,1516399796.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:56.745Z,1516399796.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:56.759Z,1516399796.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:57.142Z,1516399797.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:57.156Z,1516399797.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:57.540Z,1516399797.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:57.558Z,1516399797.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:57.937Z,1516399797.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:57.952Z,1516399797.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:58.338Z,1516399798.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:58.357Z,1516399798.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:58.740Z,1516399798.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:58.758Z,1516399798.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:59.148Z,1516399799.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:59.167Z,1516399799.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:59.550Z,1516399799.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:59.564Z,1516399799.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:09:59.950Z,1516399799.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:09:59.963Z,1516399799.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:00.330Z,1516399800.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:00.352Z,1516399800.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:00.739Z,1516399800.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:00.759Z,1516399800.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:01.137Z,1516399801.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:01.154Z,1516399801.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:01.529Z,1516399801.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:01.558Z,1516399801.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:01.949Z,1516399801.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:01.964Z,1516399801.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:02.349Z,1516399802.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:02.370Z,1516399802.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:02.745Z,1516399802.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:02.760Z,1516399802.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:03.139Z,1516399803.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:03.153Z,1516399803.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:03.537Z,1516399803.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:03.558Z,1516399803.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:03.925Z,1516399803.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:03.966Z,1516399803.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:04.344Z,1516399804.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:04.359Z,1516399804.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:04.732Z,1516399804.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:04.764Z,1516399804.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:05.157Z,1516399805.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:05.171Z,1516399805.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:05.554Z,1516399805.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:05.568Z,1516399805.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:05.955Z,1516399805.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:05.969Z,1516399805.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:06.330Z,1516399806.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:06.356Z,1516399806.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:06.736Z,1516399806.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:06.761Z,1516399806.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:07.128Z,1516399807.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:07.161Z,1516399807.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:07.535Z,1516399807.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:07.561Z,1516399807.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:07.954Z,1516399807.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:07.975Z,1516399807.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:08.359Z,1516399808.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:08.373Z,1516399808.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:08.750Z,1516399808.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:08.765Z,1516399808.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:09.131Z,1516399809.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:09.156Z,1516399809.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:09.527Z,1516399809.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:09.563Z,1516399809.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:09.929Z,1516399809.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:09.968Z,1516399809.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:10.332Z,1516399810.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:10.366Z,1516399810.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:10.731Z,1516399810.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:10.763Z,1516399810.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:11.154Z,1516399811.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:11.168Z,1516399811.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:11.553Z,1516399811.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:11.568Z,1516399811.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:11.938Z,1516399811.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:11.964Z,1516399811.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:12.329Z,1516399812.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:12.351Z,1516399812.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:12.735Z,1516399812.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:12.766Z,1516399812.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:13.137Z,1516399813.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:13.169Z,1516399813.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:13.525Z,1516399813.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:13.539Z,1516399813.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:13.946Z,1516399813.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:13.971Z,1516399813.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:14.346Z,1516399814.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:14.366Z,1516399814.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:14.742Z,1516399814.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:14.763Z,1516399814.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:15.141Z,1516399815.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:15.155Z,1516399815.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:15.541Z,1516399815.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:15.554Z,1516399815.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:15.936Z,1516399815.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:15.951Z,1516399815.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:16.341Z,1516399816.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:16.363Z,1516399816.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:16.737Z,1516399816.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:16.755Z,1516399816.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:17.150Z,1516399817.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:17.164Z,1516399817.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:17.549Z,1516399817.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:17.571Z,1516399817.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:17.949Z,1516399817.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:17.963Z,1516399817.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:18.336Z,1516399818.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:18.362Z,1516399818.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:18.742Z,1516399818.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:18.763Z,1516399818.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:19.145Z,1516399819.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:19.159Z,1516399819.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:19.525Z,1516399819.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:19.560Z,1516399819.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:19.954Z,1516399819.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:19.968Z,1516399819.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:20.354Z,1516399820.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:20.367Z,1516399820.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:20.749Z,1516399820.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:20.765Z,1516399820.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:21.143Z,1516399821.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:21.157Z,1516399821.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:21.527Z,1516399821.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:21.560Z,1516399821.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:21.937Z,1516399821.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:21.955Z,1516399821.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:22.334Z,1516399822.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:22.366Z,1516399822.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:22.744Z,1516399822.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:22.757Z,1516399822.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:23.154Z,1516399823.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:23.168Z,1516399823.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:23.553Z,1516399823.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:23.567Z,1516399823.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:23.954Z,1516399823.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:23.974Z,1516399823.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:24.326Z,1516399824.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:24.359Z,1516399824.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:24.744Z,1516399824.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:24.763Z,1516399824.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:25.146Z,1516399825.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:25.160Z,1516399825.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:25.525Z,1516399825.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:25.559Z,1516399825.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:25.954Z,1516399825.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:25.968Z,1516399825.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:26.354Z,1516399826.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:26.368Z,1516399826.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:26.742Z,1516399826.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:26.770Z,1516399826.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:27.135Z,1516399827.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:27.161Z,1516399827.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:27.526Z,1516399827.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:27.572Z,1516399827.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:27.931Z,1516399827.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:27.958Z,1516399827.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:28.341Z,1516399828.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:28.355Z,1516399828.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:28.740Z,1516399828.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:28.754Z,1516399828.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:29.154Z,1516399829.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:29.184Z,1516399829.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:29.554Z,1516399829.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:29.584Z,1516399829.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:29.942Z,1516399829.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:29.962Z,1516399829.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:30.332Z,1516399830.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:30.347Z,1516399830.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:30.740Z,1516399830.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:30.759Z,1516399830.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:31.141Z,1516399831.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:31.155Z,1516399831.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:31.536Z,1516399831.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:31.550Z,1516399831.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:31.954Z,1516399831.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:31.982Z,1516399831.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:32.346Z,1516399832.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:32.360Z,1516399832.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:32.741Z,1516399832.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:32.755Z,1516399832.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:33.140Z,1516399833.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:33.159Z,1516399833.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:33.540Z,1516399833.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:33.554Z,1516399833.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:33.937Z,1516399833.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:33.963Z,1516399833.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:34.341Z,1516399834.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:34.355Z,1516399834.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:34.740Z,1516399834.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:34.754Z,1516399834.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:35.154Z,1516399835.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:35.183Z,1516399835.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:35.546Z,1516399835.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:35.560Z,1516399835.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:35.954Z,1516399835.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:35.984Z,1516399835.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:36.332Z,1516399836.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:36.347Z,1516399836.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:36.737Z,1516399836.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:36.755Z,1516399836.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:37.144Z,1516399837.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:37.158Z,1516399837.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:37.537Z,1516399837.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:37.551Z,1516399837.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:37.944Z,1516399837.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:37.963Z,1516399837.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:38.350Z,1516399838.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:38.370Z,1516399838.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:38.745Z,1516399838.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:38.760Z,1516399838.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:39.143Z,1516399839.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:39.157Z,1516399839.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:39.538Z,1516399839.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:39.558Z,1516399839.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:39.930Z,1516399839.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:39.988Z,1516399839.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:40.338Z,1516399840.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:40.357Z,1516399840.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:40.744Z,1516399840.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:40.759Z,1516399840.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:41.146Z,1516399841.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:41.161Z,1516399841.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:41.550Z,1516399841.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:41.564Z,1516399841.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:41.946Z,1516399841.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:41.960Z,1516399841.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:42.337Z,1516399842.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:42.352Z,1516399842.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:42.740Z,1516399842.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:42.754Z,1516399842.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:43.140Z,1516399843.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:43.162Z,1516399843.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:43.538Z,1516399843.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:43.552Z,1516399843.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:43.947Z,1516399843.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:43.970Z,1516399843.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:44.355Z,1516399844.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:44.375Z,1516399844.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:47.450Z,1516399847.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:47.465Z,1516399847.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:47.572Z,1516399847.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:47.603Z,1516399847.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:47.923Z,1516399847.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:47.951Z,1516399847.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:48.322Z,1516399848.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:48.345Z,1516399848.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:48.713Z,1516399848.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:48.748Z,1516399848.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:49.137Z,1516399849.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:49.151Z,1516399849.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:49.540Z,1516399849.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:49.554Z,1516399849.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:49.918Z,1516399849.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:49.945Z,1516399849.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:50.319Z,1516399850.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:50.348Z,1516399850.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:50.717Z,1516399850.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:50.747Z,1516399850.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:51.120Z,1516399851.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:51.148Z,1516399851.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:51.519Z,1516399851.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:51.548Z,1516399851.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:51.938Z,1516399851.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:51.952Z,1516399851.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:52.318Z,1516399852.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:52.344Z,1516399852.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:52.727Z,1516399852.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:52.751Z,1516399852.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:53.148Z,1516399853.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:53.174Z,1516399853.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:53.507Z,1516399853.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:53.539Z,1516399853.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:53.935Z,1516399853.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:53.955Z,1516399853.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:54.339Z,1516399854.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:54.353Z,1516399854.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:54.730Z,1516399854.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:54.751Z,1516399854.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:55.112Z,1516399855.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:55.143Z,1516399855.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:55.507Z,1516399855.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:55.544Z,1516399855.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:55.918Z,1516399855.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:55.954Z,1516399855.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:56.338Z,1516399856.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:56.355Z,1516399856.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:56.735Z,1516399856.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:56.748Z,1516399856.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:57.116Z,1516399857.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:57.142Z,1516399857.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:57.511Z,1516399857.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:57.546Z,1516399857.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:57.935Z,1516399857.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:57.949Z,1516399857.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:58.330Z,1516399858.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:58.345Z,1516399858.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:58.730Z,1516399858.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:58.744Z,1516399858.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:59.112Z,1516399859.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:59.143Z,1516399859.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:59.509Z,1516399859.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:59.535Z,1516399859.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:10:59.934Z,1516399859.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:10:59.949Z,1516399859.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:00.322Z,1516399860.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:00.355Z,1516399860.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:00.718Z,1516399860.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:00.751Z,1516399860.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:01.117Z,1516399861.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:01.146Z,1516399861.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:01.507Z,1516399861.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:01.550Z,1516399861.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:01.919Z,1516399861.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:01.951Z,1516399861.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:02.330Z,1516399862.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:02.352Z,1516399862.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:02.718Z,1516399862.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:02.752Z,1516399862.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:03.116Z,1516399863.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:03.151Z,1516399863.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:03.515Z,1516399863.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:03.546Z,1516399863.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:03.926Z,1516399863.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:03.954Z,1516399863.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:04.322Z,1516399864.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:04.356Z,1516399864.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:04.730Z,1516399864.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:04.756Z,1516399864.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:05.120Z,1516399865.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:05.160Z,1516399865.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:05.506Z,1516399865.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:05.520Z,1516399865.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:05.930Z,1516399865.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:05.956Z,1516399865.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:06.326Z,1516399866.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:06.359Z,1516399866.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:06.722Z,1516399866.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:06.757Z,1516399866.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:07.113Z,1516399867.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:07.127Z,1516399867.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:07.512Z,1516399867.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:07.526Z,1516399867.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:07.926Z,1516399867.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:07.969Z,1516399867.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:08.334Z,1516399868.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:08.355Z,1516399868.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:08.718Z,1516399868.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:08.738Z,1516399868.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:09.116Z,1516399869.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:09.130Z,1516399869.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:09.521Z,1516399869.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:09.559Z,1516399869.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:09.916Z,1516399869.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:09.930Z,1516399869.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:10.330Z,1516399870.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:10.344Z,1516399870.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:10.734Z,1516399870.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:10.748Z,1516399870.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:11.126Z,1516399871.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:11.146Z,1516399871.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:11.509Z,1516399871.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:11.530Z,1516399871.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:11.915Z,1516399871.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:11.934Z,1516399871.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:12.318Z,1516399872.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:12.342Z,1516399872.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:12.717Z,1516399872.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:12.735Z,1516399872.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:13.129Z,1516399873.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:13.143Z,1516399873.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:13.534Z,1516399873.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:13.554Z,1516399873.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:13.922Z,1516399873.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:13.966Z,1516399873.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:14.315Z,1516399874.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:14.340Z,1516399874.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:14.712Z,1516399874.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:14.743Z,1516399874.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:15.115Z,1516399875.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:15.140Z,1516399875.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:15.520Z,1516399875.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:15.546Z,1516399875.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:15.912Z,1516399875.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:15.947Z,1516399875.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:16.330Z,1516399876.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:16.344Z,1516399876.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:16.734Z,1516399876.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:16.748Z,1516399876.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:17.130Z,1516399877.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:17.150Z,1516399877.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:17.505Z,1516399877.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:17.519Z,1516399877.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:17.915Z,1516399877.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:17.946Z,1516399877.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:18.316Z,1516399878.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:18.352Z,1516399878.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:18.708Z,1516399878.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:18.722Z,1516399878.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:19.126Z,1516399879.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:19.152Z,1516399879.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:19.526Z,1516399879.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:19.554Z,1516399879.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:19.923Z,1516399879.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:19.948Z,1516399879.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:20.311Z,1516399880.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:20.351Z,1516399880.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:20.716Z,1516399880.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:20.731Z,1516399880.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:21.119Z,1516399881.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:21.155Z,1516399881.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:21.520Z,1516399881.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:21.535Z,1516399881.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:21.917Z,1516399881.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:21.940Z,1516399881.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:22.335Z,1516399882.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:22.363Z,1516399882.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:22.726Z,1516399882.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:22.741Z,1516399882.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:23.134Z,1516399883.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:23.164Z,1516399883.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:23.519Z,1516399883.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:23.539Z,1516399883.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:23.920Z,1516399883.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:23.939Z,1516399883.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:24.322Z,1516399884.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:24.336Z,1516399884.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:24.720Z,1516399884.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:24.735Z,1516399884.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:25.134Z,1516399885.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:25.163Z,1516399885.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:25.526Z,1516399885.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:25.541Z,1516399885.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:25.934Z,1516399885.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:25.963Z,1516399885.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:26.317Z,1516399886.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:26.339Z,1516399886.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:26.721Z,1516399886.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:26.736Z,1516399886.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:27.110Z,1516399887.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:27.137Z,1516399887.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:27.525Z,1516399887.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:27.539Z,1516399887.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:27.925Z,1516399887.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:27.939Z,1516399887.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:28.326Z,1516399888.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:28.340Z,1516399888.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:28.730Z,1516399888.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:28.744Z,1516399888.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:29.130Z,1516399889.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:29.144Z,1516399889.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:29.520Z,1516399889.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:29.535Z,1516399889.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:29.918Z,1516399889.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:29.946Z,1516399889.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:30.326Z,1516399890.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:30.340Z,1516399890.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:30.710Z,1516399890.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:30.743Z,1516399890.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:31.134Z,1516399891.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:31.148Z,1516399891.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:31.531Z,1516399891.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:31.546Z,1516399891.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:31.922Z,1516399891.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:31.947Z,1516399891.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:32.323Z,1516399892.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:32.340Z,1516399892.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:32.707Z,1516399892.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:32.740Z,1516399892.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:33.107Z,1516399893.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:33.138Z,1516399893.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:33.524Z,1516399893.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:33.538Z,1516399893.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:33.907Z,1516399893.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:33.938Z,1516399893.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:34.326Z,1516399894.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:34.341Z,1516399894.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:34.734Z,1516399894.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:34.748Z,1516399894.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:35.126Z,1516399895.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:35.140Z,1516399895.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:35.507Z,1516399895.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:35.532Z,1516399895.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:35.911Z,1516399895.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:35.942Z,1516399895.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:36.308Z,1516399896.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:36.342Z,1516399896.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:36.722Z,1516399896.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:36.743Z,1516399896.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:37.130Z,1516399897.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:37.144Z,1516399897.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:37.531Z,1516399897.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:37.545Z,1516399897.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:37.934Z,1516399897.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:37.959Z,1516399897.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:38.323Z,1516399898.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:38.337Z,1516399898.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:38.708Z,1516399898.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:38.740Z,1516399898.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:39.112Z,1516399899.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:39.138Z,1516399899.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:39.521Z,1516399899.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:39.539Z,1516399899.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:39.908Z,1516399899.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:39.943Z,1516399899.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:40.334Z,1516399900.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:40.348Z,1516399900.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:40.735Z,1516399900.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:40.755Z,1516399900.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:41.135Z,1516399901.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:41.149Z,1516399901.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:41.524Z,1516399901.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:41.539Z,1516399901.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:41.911Z,1516399901.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:41.947Z,1516399901.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:42.325Z,1516399902.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:42.339Z,1516399902.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:42.723Z,1516399902.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:42.743Z,1516399902.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:43.131Z,1516399903.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:43.146Z,1516399903.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:43.537Z,1516399903.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:43.551Z,1516399903.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:43.933Z,1516399903.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:43.963Z,1516399903.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:44.315Z,1516399904.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:44.340Z,1516399904.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:44.708Z,1516399904.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:44.739Z,1516399904.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:47.816Z,1516399907.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:47.838Z,1516399907.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:47.947Z,1516399907.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:47.991Z,1516399907.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:48.294Z,1516399908.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:48.308Z,1516399908.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:48.710Z,1516399908.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:48.738Z,1516399908.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:49.094Z,1516399909.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:49.108Z,1516399909.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:49.493Z,1516399909.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:49.507Z,1516399909.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:49.889Z,1516399909.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:49.912Z,1516399909.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:50.286Z,1516399910.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:50.305Z,1516399910.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:50.690Z,1516399910.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:50.705Z,1516399910.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:51.098Z,1516399911.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:51.119Z,1516399911.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:51.498Z,1516399911.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:51.512Z,1516399911.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:51.910Z,1516399911.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:51.924Z,1516399911.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:52.297Z,1516399912.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:52.311Z,1516399912.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:52.685Z,1516399912.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:52.707Z,1516399912.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:53.092Z,1516399913.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:53.107Z,1516399913.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:53.488Z,1516399913.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:53.518Z,1516399913.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:53.878Z,1516399913.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:53.912Z,1516399913.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:54.305Z,1516399914.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:54.320Z,1516399914.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:54.707Z,1516399914.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:54.721Z,1516399914.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:55.099Z,1516399915.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:55.113Z,1516399915.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:55.496Z,1516399915.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:55.511Z,1516399915.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:55.890Z,1516399915.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:55.919Z,1516399915.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:56.296Z,1516399916.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:56.311Z,1516399916.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:56.682Z,1516399916.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:56.715Z,1516399916.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:57.103Z,1516399917.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:57.123Z,1516399917.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:57.509Z,1516399917.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:57.523Z,1516399917.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:57.905Z,1516399917.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:57.920Z,1516399917.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:58.283Z,1516399918.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:58.316Z,1516399918.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:58.679Z,1516399918.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:58.704Z,1516399918.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:59.082Z,1516399919.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:59.114Z,1516399919.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:59.484Z,1516399919.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:59.515Z,1516399919.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:11:59.887Z,1516399919.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:11:59.912Z,1516399919.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:00.302Z,1516399920.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:00.323Z,1516399920.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:00.707Z,1516399920.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:00.721Z,1516399920.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:01.105Z,1516399921.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:01.119Z,1516399921.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:01.483Z,1516399921.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:01.508Z,1516399921.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:01.884Z,1516399921.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:01.911Z,1516399921.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:02.280Z,1516399922.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:02.315Z,1516399922.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:02.683Z,1516399922.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:02.710Z,1516399922.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:03.101Z,1516399923.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:03.130Z,1516399923.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:03.510Z,1516399923.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:03.524Z,1516399923.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:03.907Z,1516399923.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:03.923Z,1516399923.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:04.280Z,1516399924.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:04.311Z,1516399924.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:04.688Z,1516399924.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:04.714Z,1516399924.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:05.084Z,1516399925.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:05.119Z,1516399925.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:05.489Z,1516399925.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:05.527Z,1516399925.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:05.883Z,1516399925.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:05.919Z,1516399925.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:06.295Z,1516399926.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:06.331Z,1516399926.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:06.714Z,1516399926.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:06.728Z,1516399926.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:07.106Z,1516399927.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:07.125Z,1516399927.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:07.490Z,1516399927.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:07.522Z,1516399927.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:07.888Z,1516399927.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:07.914Z,1516399927.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:08.289Z,1516399928.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:08.303Z,1516399928.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:08.690Z,1516399928.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:08.749Z,1516399928.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:09.098Z,1516399929.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:09.132Z,1516399929.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:09.506Z,1516399929.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:09.535Z,1516399929.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:09.902Z,1516399929.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:09.932Z,1516399929.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:10.283Z,1516399930.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:10.297Z,1516399930.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:10.691Z,1516399930.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:10.727Z,1516399930.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:11.084Z,1516399931.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:11.099Z,1516399931.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:11.484Z,1516399931.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:11.510Z,1516399931.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:11.891Z,1516399931.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:11.911Z,1516399931.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:12.302Z,1516399932.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:12.334Z,1516399932.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:12.702Z,1516399932.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:12.716Z,1516399932.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:13.093Z,1516399933.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:13.107Z,1516399933.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:13.493Z,1516399933.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:13.507Z,1516399933.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:13.892Z,1516399933.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:13.906Z,1516399933.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:14.292Z,1516399934.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:14.307Z,1516399934.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:14.686Z,1516399934.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:14.704Z,1516399934.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:15.099Z,1516399935.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:15.113Z,1516399935.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:15.502Z,1516399935.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:15.517Z,1516399935.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:15.899Z,1516399935.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:15.914Z,1516399935.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:16.296Z,1516399936.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:16.310Z,1516399936.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:16.696Z,1516399936.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:16.710Z,1516399936.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:17.096Z,1516399937.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:17.111Z,1516399937.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:17.489Z,1516399937.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:17.503Z,1516399937.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:17.895Z,1516399937.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:17.910Z,1516399937.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:18.298Z,1516399938.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:18.314Z,1516399938.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:18.698Z,1516399938.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:18.712Z,1516399938.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:19.098Z,1516399939.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:19.113Z,1516399939.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:19.491Z,1516399939.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:19.505Z,1516399939.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:19.895Z,1516399939.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:19.909Z,1516399939.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:20.286Z,1516399940.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:20.313Z,1516399940.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:20.695Z,1516399940.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:20.710Z,1516399940.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:21.097Z,1516399941.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:21.119Z,1516399941.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:21.502Z,1516399941.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:21.523Z,1516399941.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:21.905Z,1516399941.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:21.919Z,1516399941.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:22.295Z,1516399942.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:22.309Z,1516399942.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:22.695Z,1516399942.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:22.711Z,1516399942.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:23.086Z,1516399943.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:23.108Z,1516399943.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:23.494Z,1516399943.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:23.508Z,1516399943.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:23.895Z,1516399943.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:23.911Z,1516399943.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:24.301Z,1516399944.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:24.323Z,1516399944.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:24.705Z,1516399944.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:24.719Z,1516399944.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:25.105Z,1516399945.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:25.119Z,1516399945.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:25.495Z,1516399945.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:25.511Z,1516399945.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:25.892Z,1516399945.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:25.906Z,1516399945.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:26.304Z,1516399946.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:26.319Z,1516399946.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:26.694Z,1516399946.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:26.712Z,1516399946.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:27.102Z,1516399947.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:27.117Z,1516399947.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:27.509Z,1516399947.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:27.523Z,1516399947.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:27.905Z,1516399947.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:27.920Z,1516399947.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:28.282Z,1516399948.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:28.308Z,1516399948.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:28.694Z,1516399948.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:28.712Z,1516399948.712 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:28.713Z,1516399948.713 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-01-19T22:12:28.713Z,1516399948.713 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:12:28.715Z,1516399948.715 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:28.715Z,1516399948.715 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-01-19T22:12:28.715Z,1516399948.715 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:12:28.716Z,1516399948.716 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:28.717Z,1516399948.717 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2018-01-19T22:12:28.717Z,1516399948.717 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:12:28.728Z,1516399948.728 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:12:28.729Z,1516399948.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:12:28.729Z,1516399948.729 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:12:29.101Z,1516399949.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:29.129Z,1516399949.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:12:29.129Z,1516399949.129 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-01-19T22:12:29.130Z,1516399949.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:12:29.130Z,1516399949.130 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-01-19T22:12:29.130Z,1516399949.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:12:29.130Z,1516399949.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2018-01-19T22:12:29.506Z,1516399949.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:29.519Z,1516399949.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:12:29.519Z,1516399949.519 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:12:29.520Z,1516399949.520 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:12:29.520Z,1516399949.520 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:12:29.521Z,1516399949.521 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:12:29.521Z,1516399949.521 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:12:29.521Z,1516399949.521 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:12:29.522Z,1516399949.522 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:12:29.522Z,1516399949.522 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:12:29.902Z,1516399949.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:29.916Z,1516399949.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:12:29.917Z,1516399949.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:30.285Z,1516399950.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:30.318Z,1516399950.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:12:30.319Z,1516399950.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:30.683Z,1516399950.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:30.713Z,1516399950.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:12:30.714Z,1516399950.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:31.106Z,1516399951.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:31.126Z,1516399951.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:12:31.127Z,1516399951.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:31.515Z,1516399951.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:31.528Z,1516399951.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:12:31.529Z,1516399951.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:31.894Z,1516399951.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:31.927Z,1516399951.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:12:31.928Z,1516399951.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:32.292Z,1516399952.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:32.318Z,1516399952.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T22:12:32.318Z,1516399952.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:32.683Z,1516399952.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:32.718Z,1516399952.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T22:12:32.719Z,1516399952.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:33.108Z,1516399953.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:33.122Z,1516399953.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T22:12:33.123Z,1516399953.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:33.511Z,1516399953.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:33.524Z,1516399953.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T22:12:33.526Z,1516399953.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:33.911Z,1516399953.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:33.925Z,1516399953.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T22:12:33.926Z,1516399953.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:34.284Z,1516399954.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:34.322Z,1516399954.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T22:12:34.323Z,1516399954.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:34.690Z,1516399954.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:34.720Z,1516399954.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T22:12:34.725Z,1516399954.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:35.098Z,1516399955.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:35.126Z,1516399955.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T22:12:35.127Z,1516399955.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:35.515Z,1516399955.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:35.528Z,1516399955.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:12:35.529Z,1516399955.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:35.902Z,1516399955.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:35.930Z,1516399955.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:12:35.931Z,1516399955.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:36.291Z,1516399956.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:36.322Z,1516399956.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:12:36.323Z,1516399956.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:36.693Z,1516399956.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:36.728Z,1516399956.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:12:36.729Z,1516399956.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:37.102Z,1516399957.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:37.131Z,1516399957.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:12:37.132Z,1516399957.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:37.502Z,1516399957.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:37.530Z,1516399957.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:12:37.531Z,1516399957.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:37.903Z,1516399957.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:37.927Z,1516399957.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:12:37.928Z,1516399957.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:38.293Z,1516399958.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:38.319Z,1516399958.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T22:12:38.320Z,1516399958.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:38.687Z,1516399958.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:38.706Z,1516399958.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:12:38.707Z,1516399958.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:39.102Z,1516399959.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:39.134Z,1516399959.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:12:39.135Z,1516399959.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:39.507Z,1516399959.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:39.534Z,1516399959.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:12:39.535Z,1516399959.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:39.902Z,1516399959.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:39.932Z,1516399959.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:12:39.933Z,1516399959.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:40.296Z,1516399960.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:40.310Z,1516399960.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:12:40.311Z,1516399960.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:40.693Z,1516399960.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:40.707Z,1516399960.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T22:12:40.708Z,1516399960.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:41.096Z,1516399961.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:41.110Z,1516399961.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T22:12:41.111Z,1516399961.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:41.510Z,1516399961.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:41.532Z,1516399961.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T22:12:41.533Z,1516399961.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:41.910Z,1516399961.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:41.934Z,1516399961.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T22:12:41.935Z,1516399961.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:42.297Z,1516399962.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:42.335Z,1516399962.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T22:12:42.335Z,1516399962.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:42.697Z,1516399962.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:42.710Z,1516399962.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T22:12:42.711Z,1516399962.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:43.100Z,1516399963.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:43.119Z,1516399963.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T22:12:43.119Z,1516399963.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:43.502Z,1516399963.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:43.516Z,1516399963.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:12:43.517Z,1516399963.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:43.899Z,1516399963.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:43.912Z,1516399963.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:12:43.913Z,1516399963.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:44.285Z,1516399964.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:44.310Z,1516399964.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T22:12:44.311Z,1516399964.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:44.700Z,1516399964.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:44.714Z,1516399964.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T22:12:44.715Z,1516399964.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:45.103Z,1516399965.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:45.118Z,1516399965.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T22:12:45.119Z,1516399965.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:48.198Z,1516399968.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:48.212Z,1516399968.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-01-19T22:12:48.213Z,1516399968.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:48.340Z,1516399968.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:48.354Z,1516399968.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T22:12:48.355Z,1516399968.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:48.669Z,1516399968.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:48.706Z,1516399968.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T22:12:48.706Z,1516399968.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:49.064Z,1516399969.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:49.113Z,1516399969.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:49.521Z,1516399969.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:49.536Z,1516399969.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:49.868Z,1516399969.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:49.911Z,1516399969.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:50.273Z,1516399970.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:50.305Z,1516399970.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:50.671Z,1516399970.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:50.710Z,1516399970.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:51.075Z,1516399971.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:51.090Z,1516399971.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:51.464Z,1516399971.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:51.479Z,1516399971.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:51.868Z,1516399971.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:51.888Z,1516399971.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:52.268Z,1516399972.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:52.283Z,1516399972.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:52.664Z,1516399972.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:52.678Z,1516399972.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:53.068Z,1516399973.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:53.084Z,1516399973.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:53.484Z,1516399973.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:53.516Z,1516399973.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:53.878Z,1516399973.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:53.921Z,1516399973.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:54.274Z,1516399974.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:54.288Z,1516399974.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:54.671Z,1516399974.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:54.686Z,1516399974.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:55.064Z,1516399975.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:55.087Z,1516399975.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:55.471Z,1516399975.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:55.485Z,1516399975.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:55.867Z,1516399975.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:55.887Z,1516399975.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:56.274Z,1516399976.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:56.289Z,1516399976.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:56.679Z,1516399976.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:56.697Z,1516399976.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:57.077Z,1516399977.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:57.143Z,1516399977.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:57.472Z,1516399977.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:57.485Z,1516399977.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:57.871Z,1516399977.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:57.892Z,1516399977.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:58.271Z,1516399978.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:58.294Z,1516399978.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:58.673Z,1516399978.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:58.686Z,1516399978.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:59.071Z,1516399979.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:59.091Z,1516399979.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:59.476Z,1516399979.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:59.498Z,1516399979.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:12:59.877Z,1516399979.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:12:59.896Z,1516399979.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:00.275Z,1516399980.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:00.295Z,1516399980.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:00.671Z,1516399980.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:00.691Z,1516399980.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:01.072Z,1516399981.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:01.086Z,1516399981.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:01.472Z,1516399981.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:01.488Z,1516399981.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:01.871Z,1516399981.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:01.891Z,1516399981.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:02.278Z,1516399982.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:02.292Z,1516399982.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:02.678Z,1516399982.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:02.692Z,1516399982.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:03.076Z,1516399983.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:03.099Z,1516399983.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:03.472Z,1516399983.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:03.486Z,1516399983.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:03.871Z,1516399983.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:03.891Z,1516399983.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:04.279Z,1516399984.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:04.299Z,1516399984.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:04.673Z,1516399984.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:04.686Z,1516399984.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:05.071Z,1516399985.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:05.091Z,1516399985.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:05.478Z,1516399985.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:05.492Z,1516399985.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:05.878Z,1516399985.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:05.898Z,1516399985.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:06.282Z,1516399986.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:06.300Z,1516399986.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:06.659Z,1516399986.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:06.695Z,1516399986.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:07.063Z,1516399987.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:07.090Z,1516399987.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:07.462Z,1516399987.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:07.487Z,1516399987.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:07.876Z,1516399987.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:07.895Z,1516399987.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:08.276Z,1516399988.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:08.294Z,1516399988.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:08.686Z,1516399988.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:08.707Z,1516399988.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:09.082Z,1516399989.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:09.096Z,1516399989.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:09.456Z,1516399989.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:09.487Z,1516399989.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:09.863Z,1516399989.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:09.889Z,1516399989.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:10.272Z,1516399990.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:10.297Z,1516399990.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:10.656Z,1516399990.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:10.671Z,1516399990.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:11.061Z,1516399991.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:11.076Z,1516399991.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:11.479Z,1516399991.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:11.507Z,1516399991.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:11.878Z,1516399991.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:11.901Z,1516399991.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:12.274Z,1516399992.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:12.298Z,1516399992.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:12.667Z,1516399992.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:12.701Z,1516399992.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:13.064Z,1516399993.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:13.103Z,1516399993.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:13.461Z,1516399993.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:13.475Z,1516399993.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:13.867Z,1516399993.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:13.907Z,1516399993.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:14.278Z,1516399994.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:14.317Z,1516399994.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:14.682Z,1516399994.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:14.705Z,1516399994.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:15.078Z,1516399995.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:15.108Z,1516399995.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:15.468Z,1516399995.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:15.482Z,1516399995.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:15.868Z,1516399995.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:15.887Z,1516399995.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:16.268Z,1516399996.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:16.287Z,1516399996.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:16.669Z,1516399996.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:16.683Z,1516399996.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:17.065Z,1516399997.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:17.088Z,1516399997.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:17.474Z,1516399997.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:17.489Z,1516399997.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:17.878Z,1516399997.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:17.898Z,1516399997.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:18.276Z,1516399998.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:18.291Z,1516399998.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:18.671Z,1516399998.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:18.686Z,1516399998.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:19.066Z,1516399999.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:19.080Z,1516399999.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:19.472Z,1516399999.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:19.487Z,1516399999.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:19.867Z,1516399999.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:19.881Z,1516399999.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:20.278Z,1516400000.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:20.298Z,1516400000.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:20.678Z,1516400000.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:20.692Z,1516400000.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:21.077Z,1516400001.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:21.091Z,1516400001.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:21.474Z,1516400001.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:21.488Z,1516400001.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:21.865Z,1516400001.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:21.883Z,1516400001.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:22.275Z,1516400002.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:22.289Z,1516400002.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:22.664Z,1516400002.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:22.679Z,1516400002.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:23.058Z,1516400003.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:23.082Z,1516400003.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:23.475Z,1516400003.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:23.498Z,1516400003.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:23.882Z,1516400003.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:23.896Z,1516400003.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:24.277Z,1516400004.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:24.292Z,1516400004.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:24.672Z,1516400004.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:24.696Z,1516400004.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:25.070Z,1516400005.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:25.095Z,1516400005.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:25.480Z,1516400005.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:25.498Z,1516400005.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:25.887Z,1516400005.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:25.910Z,1516400005.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:26.328Z,1516400006.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:26.376Z,1516400006.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:26.671Z,1516400006.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:26.708Z,1516400006.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:27.106Z,1516400007.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:27.149Z,1516400007.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:27.491Z,1516400007.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:27.504Z,1516400007.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:27.869Z,1516400007.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:27.912Z,1516400007.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:28.269Z,1516400008.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:28.292Z,1516400008.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:28.670Z,1516400008.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:28.717Z,1516400008.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:29.068Z,1516400009.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:29.095Z,1516400009.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:29.478Z,1516400009.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:29.503Z,1516400009.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:29.885Z,1516400009.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:29.932Z,1516400009.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:30.280Z,1516400010.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:30.308Z,1516400010.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:30.661Z,1516400010.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:30.696Z,1516400010.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:31.073Z,1516400011.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:31.125Z,1516400011.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:31.466Z,1516400011.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:31.505Z,1516400011.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:31.892Z,1516400011.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:31.943Z,1516400011.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:32.292Z,1516400012.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:32.337Z,1516400012.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:32.679Z,1516400012.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:32.699Z,1516400012.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:33.080Z,1516400013.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:33.103Z,1516400013.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:33.461Z,1516400013.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:33.508Z,1516400013.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:33.859Z,1516400013.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:33.879Z,1516400013.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:34.267Z,1516400014.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:34.303Z,1516400014.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:34.664Z,1516400014.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:34.678Z,1516400014.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:35.064Z,1516400015.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:35.078Z,1516400015.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:35.478Z,1516400015.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:35.508Z,1516400015.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:35.878Z,1516400015.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:35.892Z,1516400015.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:36.270Z,1516400016.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:36.284Z,1516400016.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:36.668Z,1516400016.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:36.687Z,1516400016.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:37.064Z,1516400017.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:37.078Z,1516400017.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:37.465Z,1516400017.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:37.479Z,1516400017.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:37.864Z,1516400017.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:37.883Z,1516400017.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:38.282Z,1516400018.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:38.313Z,1516400018.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:38.666Z,1516400018.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:38.680Z,1516400018.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:39.082Z,1516400019.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:39.112Z,1516400019.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:39.467Z,1516400019.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:39.481Z,1516400019.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:39.862Z,1516400019.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:39.877Z,1516400019.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:40.268Z,1516400020.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:40.283Z,1516400020.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:40.669Z,1516400020.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:40.683Z,1516400020.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:41.064Z,1516400021.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:41.079Z,1516400021.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:41.482Z,1516400021.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:41.511Z,1516400021.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:41.878Z,1516400021.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:41.892Z,1516400021.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:42.282Z,1516400022.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:42.312Z,1516400022.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:42.668Z,1516400022.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:42.687Z,1516400022.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:43.068Z,1516400023.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:43.082Z,1516400023.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:43.469Z,1516400023.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:43.483Z,1516400023.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:43.868Z,1516400023.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:43.882Z,1516400023.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:44.282Z,1516400024.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:44.313Z,1516400024.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:44.670Z,1516400024.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:44.684Z,1516400024.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:45.070Z,1516400025.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:45.085Z,1516400025.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:45.465Z,1516400025.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:45.479Z,1516400025.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:48.582Z,1516400028.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:48.611Z,1516400028.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:48.709Z,1516400028.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:48.743Z,1516400028.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:49.074Z,1516400029.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:49.088Z,1516400029.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:49.486Z,1516400029.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:49.510Z,1516400029.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:49.882Z,1516400029.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:49.912Z,1516400029.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:50.266Z,1516400030.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:50.286Z,1516400030.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:50.664Z,1516400030.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:50.679Z,1516400030.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:51.067Z,1516400031.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:51.087Z,1516400031.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:51.483Z,1516400031.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:51.511Z,1516400031.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:51.869Z,1516400031.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:51.883Z,1516400031.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:52.283Z,1516400032.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:52.325Z,1516400032.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:52.668Z,1516400032.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:52.687Z,1516400032.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:53.069Z,1516400033.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:53.092Z,1516400033.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:53.471Z,1516400033.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:53.491Z,1516400033.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:53.869Z,1516400033.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:53.883Z,1516400033.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:54.273Z,1516400034.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:54.294Z,1516400034.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:54.674Z,1516400034.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:54.688Z,1516400034.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:55.074Z,1516400035.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:55.088Z,1516400035.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:55.472Z,1516400035.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:55.485Z,1516400035.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:55.873Z,1516400035.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:55.895Z,1516400035.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:56.271Z,1516400036.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:56.285Z,1516400036.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:56.673Z,1516400036.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:56.686Z,1516400036.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:57.062Z,1516400037.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:57.093Z,1516400037.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:57.477Z,1516400037.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:57.491Z,1516400037.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:57.878Z,1516400037.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:57.892Z,1516400037.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:58.277Z,1516400038.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:58.291Z,1516400038.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:58.667Z,1516400038.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:58.681Z,1516400038.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:59.069Z,1516400039.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:59.090Z,1516400039.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:59.472Z,1516400039.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:59.491Z,1516400039.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:13:59.867Z,1516400039.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:13:59.882Z,1516400039.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:00.276Z,1516400040.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:00.290Z,1516400040.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:00.674Z,1516400040.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:00.696Z,1516400040.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:01.082Z,1516400041.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:01.096Z,1516400041.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:01.472Z,1516400041.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:01.486Z,1516400041.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:01.865Z,1516400041.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:01.883Z,1516400041.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:02.276Z,1516400042.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:02.299Z,1516400042.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:02.673Z,1516400042.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:02.688Z,1516400042.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:03.070Z,1516400043.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:03.084Z,1516400043.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:03.477Z,1516400043.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:03.492Z,1516400043.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:03.882Z,1516400043.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:03.896Z,1516400043.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:04.281Z,1516400044.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:04.295Z,1516400044.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:04.672Z,1516400044.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:04.691Z,1516400044.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:05.056Z,1516400045.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:05.088Z,1516400045.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:05.474Z,1516400045.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:05.488Z,1516400045.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:05.862Z,1516400045.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:05.892Z,1516400045.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:06.283Z,1516400046.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:06.297Z,1516400046.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:06.678Z,1516400046.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:06.692Z,1516400046.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:07.083Z,1516400047.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:07.097Z,1516400047.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:07.472Z,1516400047.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:07.486Z,1516400047.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:07.866Z,1516400047.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:07.884Z,1516400047.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:08.262Z,1516400048.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:08.285Z,1516400048.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:08.669Z,1516400048.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:08.683Z,1516400048.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:09.055Z,1516400049.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:09.086Z,1516400049.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:09.478Z,1516400049.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:09.492Z,1516400049.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:09.878Z,1516400049.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:09.892Z,1516400049.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:10.281Z,1516400050.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:10.295Z,1516400050.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:10.671Z,1516400050.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:10.691Z,1516400050.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:11.068Z,1516400051.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:11.082Z,1516400051.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:11.472Z,1516400051.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:11.486Z,1516400051.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:11.862Z,1516400051.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:11.884Z,1516400051.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:12.278Z,1516400052.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:12.292Z,1516400052.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:12.678Z,1516400052.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:12.692Z,1516400052.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:13.074Z,1516400053.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:13.101Z,1516400053.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:13.459Z,1516400053.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:13.485Z,1516400053.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:13.857Z,1516400053.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:13.884Z,1516400053.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:14.263Z,1516400054.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:14.288Z,1516400054.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:14.656Z,1516400054.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:14.693Z,1516400054.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:15.063Z,1516400055.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:15.088Z,1516400055.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:15.478Z,1516400055.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:15.499Z,1516400055.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:15.886Z,1516400055.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:15.900Z,1516400055.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:16.282Z,1516400056.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:16.296Z,1516400056.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:16.659Z,1516400056.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:16.690Z,1516400056.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:17.055Z,1516400057.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:17.092Z,1516400057.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:17.464Z,1516400057.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:17.489Z,1516400057.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:17.859Z,1516400057.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:17.890Z,1516400057.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:18.274Z,1516400058.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:18.296Z,1516400058.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:18.678Z,1516400058.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:18.692Z,1516400058.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:19.078Z,1516400059.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:19.092Z,1516400059.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:19.456Z,1516400059.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:19.491Z,1516400059.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:19.853Z,1516400059.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:19.867Z,1516400059.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:20.282Z,1516400060.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:20.296Z,1516400060.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:20.670Z,1516400060.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:20.696Z,1516400060.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:21.082Z,1516400061.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:21.096Z,1516400061.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:21.460Z,1516400061.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:21.490Z,1516400061.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:21.863Z,1516400061.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:21.902Z,1516400061.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:22.274Z,1516400062.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:22.299Z,1516400062.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:22.674Z,1516400062.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:22.707Z,1516400062.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:23.070Z,1516400063.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:23.103Z,1516400063.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:23.464Z,1516400063.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:23.494Z,1516400063.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:23.863Z,1516400063.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:23.899Z,1516400063.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:24.278Z,1516400064.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:24.302Z,1516400064.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:24.666Z,1516400064.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:24.680Z,1516400064.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:25.078Z,1516400065.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:25.101Z,1516400065.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:25.468Z,1516400065.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:25.482Z,1516400065.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:25.855Z,1516400065.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:25.881Z,1516400065.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:26.282Z,1516400066.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:26.305Z,1516400066.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:26.678Z,1516400066.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:26.704Z,1516400066.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:27.078Z,1516400067.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:27.108Z,1516400067.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:27.470Z,1516400067.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:27.484Z,1516400067.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:27.869Z,1516400067.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:27.882Z,1516400067.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:28.267Z,1516400068.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:28.281Z,1516400068.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:28.682Z,1516400068.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:28.704Z,1516400068.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:29.066Z,1516400069.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:29.086Z,1516400069.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:29.465Z,1516400069.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:29.480Z,1516400069.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:29.868Z,1516400069.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:29.883Z,1516400069.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:30.282Z,1516400070.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:30.313Z,1516400070.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:30.666Z,1516400070.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:30.680Z,1516400070.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:31.082Z,1516400071.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:31.112Z,1516400071.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:31.469Z,1516400071.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:31.483Z,1516400071.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:31.864Z,1516400071.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:31.878Z,1516400071.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:32.278Z,1516400072.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:32.292Z,1516400072.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:32.670Z,1516400072.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:32.684Z,1516400072.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:33.069Z,1516400073.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:33.083Z,1516400073.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:33.469Z,1516400073.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:33.483Z,1516400073.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:33.869Z,1516400073.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:33.882Z,1516400073.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:34.282Z,1516400074.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:34.296Z,1516400074.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:34.674Z,1516400074.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:34.688Z,1516400074.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:35.074Z,1516400075.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:35.087Z,1516400075.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:35.471Z,1516400075.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:35.491Z,1516400075.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:35.871Z,1516400075.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:35.885Z,1516400075.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:36.275Z,1516400076.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:36.289Z,1516400076.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:36.678Z,1516400076.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:36.692Z,1516400076.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:37.077Z,1516400077.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:37.091Z,1516400077.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:37.473Z,1516400077.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:37.487Z,1516400077.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:37.865Z,1516400077.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:37.884Z,1516400077.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:38.275Z,1516400078.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:38.298Z,1516400078.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:38.679Z,1516400078.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:38.693Z,1516400078.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:39.074Z,1516400079.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:39.093Z,1516400079.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:39.472Z,1516400079.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:39.487Z,1516400079.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:39.871Z,1516400079.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:39.886Z,1516400079.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:40.282Z,1516400080.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:40.296Z,1516400080.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:40.680Z,1516400080.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:40.695Z,1516400080.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:41.072Z,1516400081.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:41.098Z,1516400081.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:41.456Z,1516400081.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:41.486Z,1516400081.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:41.859Z,1516400081.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:41.884Z,1516400081.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:42.277Z,1516400082.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:42.301Z,1516400082.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:42.676Z,1516400082.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:42.703Z,1516400082.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:43.082Z,1516400083.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:43.096Z,1516400083.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:43.461Z,1516400083.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:43.495Z,1516400083.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:43.858Z,1516400083.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:43.880Z,1516400083.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:44.282Z,1516400084.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:44.303Z,1516400084.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:44.306Z,1516400084.306 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T22:14:44.306Z,1516400084.306 [Default:CheckIn:C.Wait] Stopped
2018-01-19T22:14:44.306Z,1516400084.306 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T22:14:44.306Z,1516400084.306 [Default:CheckIn:D] Running Loop=1
2018-01-19T22:14:44.670Z,1516400084.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:44.705Z,1516400084.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:44.708Z,1516400084.708 [Default:CheckIn:D] Stopped
2018-01-19T22:14:44.708Z,1516400084.708 [Default:CheckIn:E] Running Loop=1
2018-01-19T22:14:45.083Z,1516400085.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:45.103Z,1516400085.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:45.106Z,1516400085.106 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 61.944710 min 
2018-01-19T22:14:45.106Z,1516400085.106 [Default:CheckIn:E] Stopped
2018-01-19T22:14:45.107Z,1516400085.107 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T22:14:45.107Z,1516400085.107 [Default:CheckIn] Stopped
2018-01-19T22:14:45.107Z,1516400085.107 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T22:14:45.107Z,1516400085.107 [Default:CheckIn](INFO): Running loop #7
2018-01-19T22:14:45.107Z,1516400085.107 [Default:CheckIn] Running Loop=7
2018-01-19T22:14:45.107Z,1516400085.107 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T22:14:45.107Z,1516400085.107 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T22:14:45.460Z,1516400085.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:45.487Z,1516400085.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:45.864Z,1516400085.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:45.902Z,1516400085.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:48.998Z,1516400088.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:49.013Z,1516400089.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:49.136Z,1516400089.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:49.171Z,1516400089.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:49.498Z,1516400089.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:49.519Z,1516400089.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:49.892Z,1516400089.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:49.907Z,1516400089.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:50.310Z,1516400090.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:50.343Z,1516400090.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:50.680Z,1516400090.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:50.710Z,1516400090.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:51.080Z,1516400091.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:51.094Z,1516400091.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:51.490Z,1516400091.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:51.522Z,1516400091.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:51.898Z,1516400091.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:51.921Z,1516400091.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:52.293Z,1516400092.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:52.328Z,1516400092.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:52.672Z,1516400092.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:52.695Z,1516400092.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:53.084Z,1516400093.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:53.103Z,1516400093.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:53.485Z,1516400093.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:53.499Z,1516400093.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:53.880Z,1516400093.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:53.894Z,1516400093.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:54.286Z,1516400094.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:54.301Z,1516400094.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:54.698Z,1516400094.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:54.729Z,1516400094.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:55.098Z,1516400095.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:55.128Z,1516400095.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:55.480Z,1516400095.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:55.507Z,1516400095.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:55.887Z,1516400095.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:55.901Z,1516400095.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:56.290Z,1516400096.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:56.305Z,1516400096.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:56.694Z,1516400096.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:56.708Z,1516400096.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:57.090Z,1516400097.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:57.110Z,1516400097.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:57.482Z,1516400097.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:57.496Z,1516400097.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:57.883Z,1516400097.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:57.897Z,1516400097.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:58.254Z,1516400098.254 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T22:14:58.254Z,1516400098.254 [NAL9602] Data Fault, FailCount= 1
2018-01-19T22:14:58.254Z,1516400098.254 [NAL9602](ERROR): Data Fault
2018-01-19T22:14:58.286Z,1516400098.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:58.311Z,1516400098.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:58.336Z,1516400098.336 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T22:14:58.652Z,1516400098.652 [NAL9602](INFO): Powering down
2018-01-19T22:14:58.679Z,1516400098.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:58.700Z,1516400098.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:59.086Z,1516400099.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:59.100Z,1516400099.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:59.479Z,1516400099.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:59.492Z,1516400099.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:14:59.505Z,1516400099.505 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T22:14:59.505Z,1516400099.505 [NAL9602] No Fault, FailCount= 1
2018-01-19T22:14:59.879Z,1516400099.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:14:59.893Z,1516400099.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:00.277Z,1516400100.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:00.303Z,1516400100.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:00.686Z,1516400100.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:00.700Z,1516400100.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:01.080Z,1516400101.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:01.094Z,1516400101.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:01.482Z,1516400101.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:01.497Z,1516400101.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:01.882Z,1516400101.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:01.896Z,1516400101.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:02.287Z,1516400102.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:02.301Z,1516400102.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:02.681Z,1516400102.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:02.700Z,1516400102.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:03.087Z,1516400103.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:03.101Z,1516400103.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:03.480Z,1516400103.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:03.495Z,1516400103.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:03.878Z,1516400103.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:03.901Z,1516400103.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:04.279Z,1516400104.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:04.293Z,1516400104.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:04.679Z,1516400104.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:04.694Z,1516400104.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:05.078Z,1516400105.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:05.099Z,1516400105.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:05.487Z,1516400105.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:05.501Z,1516400105.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:05.881Z,1516400105.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:05.895Z,1516400105.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:06.279Z,1516400106.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:06.302Z,1516400106.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:06.687Z,1516400106.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:06.701Z,1516400106.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:07.071Z,1516400107.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:07.105Z,1516400107.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:07.484Z,1516400107.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:07.503Z,1516400107.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:07.871Z,1516400107.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:07.903Z,1516400107.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:08.272Z,1516400108.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:08.299Z,1516400108.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:08.678Z,1516400108.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:08.701Z,1516400108.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:09.071Z,1516400109.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:09.105Z,1516400109.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:09.472Z,1516400109.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:09.498Z,1516400109.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:09.882Z,1516400109.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:09.896Z,1516400109.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:10.271Z,1516400110.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:10.297Z,1516400110.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:10.672Z,1516400110.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:10.698Z,1516400110.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:11.078Z,1516400111.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:11.100Z,1516400111.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:11.471Z,1516400111.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:11.496Z,1516400111.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:11.868Z,1516400111.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:11.903Z,1516400111.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:12.275Z,1516400112.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:12.300Z,1516400112.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:12.671Z,1516400112.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:12.704Z,1516400112.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:13.087Z,1516400113.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:13.101Z,1516400113.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:13.475Z,1516400113.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:13.506Z,1516400113.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:13.886Z,1516400113.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:13.900Z,1516400113.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:14.287Z,1516400114.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:14.302Z,1516400114.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:14.675Z,1516400114.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:14.707Z,1516400114.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:15.087Z,1516400115.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:15.101Z,1516400115.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:15.472Z,1516400115.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:15.507Z,1516400115.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:15.879Z,1516400115.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:15.905Z,1516400115.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:16.275Z,1516400116.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:16.301Z,1516400116.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:16.673Z,1516400116.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:16.699Z,1516400116.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:17.079Z,1516400117.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:17.105Z,1516400117.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:17.471Z,1516400117.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:17.507Z,1516400117.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:17.868Z,1516400117.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:17.884Z,1516400117.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:18.279Z,1516400118.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:18.310Z,1516400118.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:18.671Z,1516400118.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:18.687Z,1516400118.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:19.079Z,1516400119.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:19.110Z,1516400119.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:19.479Z,1516400119.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:19.494Z,1516400119.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:19.883Z,1516400119.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:19.897Z,1516400119.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:20.283Z,1516400120.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:20.298Z,1516400120.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:20.682Z,1516400120.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:20.696Z,1516400120.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:21.080Z,1516400121.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:21.094Z,1516400121.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:21.476Z,1516400121.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:21.490Z,1516400121.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:21.887Z,1516400121.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:21.900Z,1516400121.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:22.280Z,1516400122.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:22.294Z,1516400122.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:22.676Z,1516400122.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:22.691Z,1516400122.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:23.078Z,1516400123.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:23.092Z,1516400123.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:23.484Z,1516400123.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:23.498Z,1516400123.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:23.879Z,1516400123.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:23.894Z,1516400123.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:24.281Z,1516400124.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:24.298Z,1516400124.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:24.680Z,1516400124.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:24.694Z,1516400124.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:25.080Z,1516400125.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:25.095Z,1516400125.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:25.484Z,1516400125.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:25.498Z,1516400125.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:25.885Z,1516400125.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:25.898Z,1516400125.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:26.275Z,1516400126.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:26.306Z,1516400126.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:26.683Z,1516400126.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:26.698Z,1516400126.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:27.084Z,1516400127.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:27.098Z,1516400127.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:27.482Z,1516400127.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:27.497Z,1516400127.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:27.891Z,1516400127.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:27.906Z,1516400127.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:28.280Z,1516400128.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:28.294Z,1516400128.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:28.655Z,1516400128.655 [NAL9602](INFO): Powering up NAL9602
2018-01-19T22:15:28.683Z,1516400128.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:28.702Z,1516400128.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:29.083Z,1516400129.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:29.097Z,1516400129.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:29.484Z,1516400129.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:29.497Z,1516400129.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:29.880Z,1516400129.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:29.894Z,1516400129.894 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:29.894Z,1516400129.894 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-01-19T22:15:29.894Z,1516400129.894 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:15:29.896Z,1516400129.896 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:29.896Z,1516400129.896 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-01-19T22:15:29.896Z,1516400129.896 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:15:29.898Z,1516400129.898 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:29.898Z,1516400129.898 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2018-01-19T22:15:29.898Z,1516400129.898 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:15:29.910Z,1516400129.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:15:29.910Z,1516400129.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:15:29.911Z,1516400129.911 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:15:30.282Z,1516400130.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:30.306Z,1516400130.306 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:15:30.306Z,1516400130.306 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-01-19T22:15:30.306Z,1516400130.306 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:15:30.306Z,1516400130.306 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-01-19T22:15:30.307Z,1516400130.307 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:15:30.307Z,1516400130.307 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2018-01-19T22:15:30.683Z,1516400130.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:30.695Z,1516400130.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:15:30.696Z,1516400130.696 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:15:30.696Z,1516400130.696 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:15:30.696Z,1516400130.696 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:15:30.697Z,1516400130.697 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:15:30.697Z,1516400130.697 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:15:30.698Z,1516400130.698 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:15:30.698Z,1516400130.698 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:15:30.698Z,1516400130.698 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:15:31.079Z,1516400131.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:31.093Z,1516400131.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:15:31.094Z,1516400131.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:31.482Z,1516400131.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:31.496Z,1516400131.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:15:31.497Z,1516400131.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:31.889Z,1516400131.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:31.903Z,1516400131.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:15:31.904Z,1516400131.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:32.280Z,1516400132.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:32.294Z,1516400132.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:15:32.295Z,1516400132.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:32.682Z,1516400132.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:32.696Z,1516400132.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:15:32.697Z,1516400132.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:33.078Z,1516400133.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:33.092Z,1516400133.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:15:33.093Z,1516400133.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:33.468Z,1516400133.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:33.502Z,1516400133.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T22:15:33.503Z,1516400133.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:33.886Z,1516400133.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:33.900Z,1516400133.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T22:15:33.901Z,1516400133.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:34.286Z,1516400134.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:34.300Z,1516400134.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T22:15:34.301Z,1516400134.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:34.680Z,1516400134.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:34.694Z,1516400134.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T22:15:34.695Z,1516400134.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:35.082Z,1516400135.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:35.096Z,1516400135.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T22:15:35.097Z,1516400135.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:35.487Z,1516400135.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:35.500Z,1516400135.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T22:15:35.501Z,1516400135.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:35.880Z,1516400135.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:35.894Z,1516400135.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T22:15:35.895Z,1516400135.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:36.282Z,1516400136.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:36.296Z,1516400136.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T22:15:36.297Z,1516400136.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:36.678Z,1516400136.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:36.692Z,1516400136.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:15:36.693Z,1516400136.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:37.087Z,1516400137.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:37.100Z,1516400137.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:15:37.101Z,1516400137.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:37.482Z,1516400137.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:37.496Z,1516400137.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:15:37.497Z,1516400137.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:37.887Z,1516400137.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:37.900Z,1516400137.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:15:37.901Z,1516400137.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:38.283Z,1516400138.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:38.297Z,1516400138.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:15:38.298Z,1516400138.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:38.682Z,1516400138.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:38.696Z,1516400138.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:15:38.697Z,1516400138.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:39.097Z,1516400139.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:39.111Z,1516400139.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:15:39.112Z,1516400139.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:39.454Z,1516400139.454 [NAL9602](INFO): NAL9602 initialized
2018-01-19T22:15:39.471Z,1516400139.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:39.510Z,1516400139.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T22:15:39.510Z,1516400139.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:39.887Z,1516400139.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:39.901Z,1516400139.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:15:39.902Z,1516400139.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:40.294Z,1516400140.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:40.308Z,1516400140.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:15:40.309Z,1516400140.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:40.693Z,1516400140.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:40.707Z,1516400140.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:15:40.708Z,1516400140.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:41.097Z,1516400141.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:41.118Z,1516400141.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:15:41.119Z,1516400141.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:41.485Z,1516400141.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:41.499Z,1516400141.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:15:41.500Z,1516400141.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:41.883Z,1516400141.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:41.897Z,1516400141.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T22:15:41.898Z,1516400141.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:42.285Z,1516400142.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:42.298Z,1516400142.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T22:15:42.299Z,1516400142.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:42.687Z,1516400142.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:42.701Z,1516400142.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T22:15:42.702Z,1516400142.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:43.090Z,1516400143.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:43.104Z,1516400143.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T22:15:43.105Z,1516400143.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:43.497Z,1516400143.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:43.518Z,1516400143.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T22:15:43.519Z,1516400143.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:43.897Z,1516400143.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:43.911Z,1516400143.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T22:15:43.912Z,1516400143.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:44.272Z,1516400144.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:44.306Z,1516400144.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T22:15:44.307Z,1516400144.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:44.688Z,1516400144.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:44.702Z,1516400144.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:15:44.703Z,1516400144.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:45.102Z,1516400145.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:45.116Z,1516400145.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:15:45.117Z,1516400145.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:45.497Z,1516400145.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:45.511Z,1516400145.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T22:15:45.512Z,1516400145.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:45.898Z,1516400145.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:45.918Z,1516400145.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T22:15:45.919Z,1516400145.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:49.036Z,1516400149.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:49.051Z,1516400149.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T22:15:49.052Z,1516400149.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:49.163Z,1516400149.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:49.198Z,1516400149.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-19T22:15:49.199Z,1516400149.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:49.523Z,1516400149.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:49.546Z,1516400149.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-19T22:15:49.546Z,1516400149.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:49.927Z,1516400149.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:49.959Z,1516400149.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:50.310Z,1516400150.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:50.324Z,1516400150.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:50.707Z,1516400150.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:50.727Z,1516400150.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:51.104Z,1516400151.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:51.119Z,1516400151.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:51.503Z,1516400151.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:51.517Z,1516400151.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:51.907Z,1516400151.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:51.927Z,1516400151.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:52.318Z,1516400152.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:52.353Z,1516400152.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:52.722Z,1516400152.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:52.751Z,1516400152.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:53.122Z,1516400153.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:53.151Z,1516400153.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:53.509Z,1516400153.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:53.523Z,1516400153.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:53.909Z,1516400153.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:53.927Z,1516400153.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:54.310Z,1516400154.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:54.325Z,1516400154.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:54.709Z,1516400154.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:54.724Z,1516400154.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:55.122Z,1516400155.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:55.152Z,1516400155.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:55.514Z,1516400155.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:55.528Z,1516400155.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:55.922Z,1516400155.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:55.953Z,1516400155.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:56.298Z,1516400156.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:56.331Z,1516400156.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:56.712Z,1516400156.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:56.726Z,1516400156.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:57.114Z,1516400157.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:57.129Z,1516400157.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:57.518Z,1516400157.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:57.574Z,1516400157.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:57.918Z,1516400157.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:57.932Z,1516400157.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:58.314Z,1516400158.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:58.328Z,1516400158.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:58.711Z,1516400158.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:58.726Z,1516400158.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:59.117Z,1516400159.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:59.151Z,1516400159.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:59.517Z,1516400159.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:59.531Z,1516400159.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:15:59.918Z,1516400159.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:15:59.939Z,1516400159.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:00.312Z,1516400160.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:00.328Z,1516400160.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:00.704Z,1516400160.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:00.719Z,1516400160.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:01.118Z,1516400161.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:01.133Z,1516400161.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:01.517Z,1516400161.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:01.532Z,1516400161.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:01.918Z,1516400161.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:01.932Z,1516400161.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:02.308Z,1516400162.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:02.326Z,1516400162.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:02.712Z,1516400162.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:02.727Z,1516400162.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:03.115Z,1516400163.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:03.129Z,1516400163.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:03.518Z,1516400163.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:03.535Z,1516400163.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:03.917Z,1516400163.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:03.939Z,1516400163.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:04.313Z,1516400164.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:04.327Z,1516400164.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:04.712Z,1516400164.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:04.726Z,1516400164.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:05.118Z,1516400165.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:05.139Z,1516400165.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:05.522Z,1516400165.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:05.536Z,1516400165.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:05.922Z,1516400165.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:05.936Z,1516400165.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:06.312Z,1516400166.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:06.327Z,1516400166.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:06.695Z,1516400166.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:06.730Z,1516400166.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:07.121Z,1516400167.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:07.139Z,1516400167.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:07.520Z,1516400167.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:07.543Z,1516400167.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:07.922Z,1516400167.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:07.936Z,1516400167.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:08.312Z,1516400168.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:08.327Z,1516400168.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:08.701Z,1516400168.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:08.735Z,1516400168.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:09.121Z,1516400169.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:09.147Z,1516400169.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:09.528Z,1516400169.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:09.551Z,1516400169.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:09.911Z,1516400169.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:09.949Z,1516400169.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:10.310Z,1516400170.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:10.367Z,1516400170.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:10.703Z,1516400170.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:10.723Z,1516400170.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:11.118Z,1516400171.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:11.148Z,1516400171.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:11.514Z,1516400171.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:11.528Z,1516400171.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:11.922Z,1516400171.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:11.952Z,1516400171.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:12.307Z,1516400172.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:12.321Z,1516400172.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:12.703Z,1516400172.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:12.723Z,1516400172.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:13.118Z,1516400173.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:13.150Z,1516400173.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:13.522Z,1516400173.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:13.589Z,1516400173.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:13.911Z,1516400173.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:13.925Z,1516400173.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:14.308Z,1516400174.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:14.327Z,1516400174.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:14.707Z,1516400174.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:14.721Z,1516400174.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:15.113Z,1516400175.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:15.127Z,1516400175.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:15.518Z,1516400175.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:15.539Z,1516400175.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:15.917Z,1516400175.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:15.931Z,1516400175.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:16.315Z,1516400176.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:16.330Z,1516400176.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:16.711Z,1516400176.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:16.727Z,1516400176.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:17.116Z,1516400177.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:17.131Z,1516400177.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:17.520Z,1516400177.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:17.535Z,1516400177.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:17.919Z,1516400177.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:17.933Z,1516400177.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:18.307Z,1516400178.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:18.321Z,1516400178.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:18.709Z,1516400178.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:18.723Z,1516400178.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:19.112Z,1516400179.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:19.126Z,1516400179.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:19.517Z,1516400179.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:19.531Z,1516400179.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:19.918Z,1516400179.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:19.932Z,1516400179.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:20.317Z,1516400180.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:20.331Z,1516400180.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:20.711Z,1516400180.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:20.727Z,1516400180.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:21.104Z,1516400181.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:21.118Z,1516400181.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:21.512Z,1516400181.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:21.527Z,1516400181.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:21.907Z,1516400181.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:21.922Z,1516400181.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:22.314Z,1516400182.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:22.340Z,1516400182.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:22.717Z,1516400182.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:22.731Z,1516400182.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:23.117Z,1516400183.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:23.131Z,1516400183.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:23.508Z,1516400183.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:23.525Z,1516400183.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:23.911Z,1516400183.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:23.927Z,1516400183.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:24.325Z,1516400184.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:24.352Z,1516400184.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:24.714Z,1516400184.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:24.728Z,1516400184.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:25.112Z,1516400185.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:25.126Z,1516400185.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:25.523Z,1516400185.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:25.537Z,1516400185.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:25.922Z,1516400185.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:25.936Z,1516400185.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:26.321Z,1516400186.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:26.335Z,1516400186.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:26.702Z,1516400186.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:26.728Z,1516400186.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:27.112Z,1516400187.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:27.126Z,1516400187.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:27.512Z,1516400187.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:27.527Z,1516400187.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:27.915Z,1516400187.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:27.930Z,1516400187.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:28.313Z,1516400188.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:28.328Z,1516400188.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:28.723Z,1516400188.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:28.743Z,1516400188.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:29.118Z,1516400189.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:29.139Z,1516400189.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:29.512Z,1516400189.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:29.526Z,1516400189.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:29.911Z,1516400189.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:29.927Z,1516400189.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:30.299Z,1516400190.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:30.331Z,1516400190.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:30.696Z,1516400190.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:30.727Z,1516400190.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:31.111Z,1516400191.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:31.127Z,1516400191.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:31.518Z,1516400191.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:31.539Z,1516400191.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:31.926Z,1516400191.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:31.940Z,1516400191.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:32.322Z,1516400192.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:32.336Z,1516400192.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:32.711Z,1516400192.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:32.727Z,1516400192.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:33.095Z,1516400193.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:33.121Z,1516400193.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:33.512Z,1516400193.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:33.527Z,1516400193.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:33.898Z,1516400193.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:33.930Z,1516400193.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:34.313Z,1516400194.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:34.339Z,1516400194.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:34.724Z,1516400194.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:34.747Z,1516400194.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:35.122Z,1516400195.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:35.136Z,1516400195.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:35.495Z,1516400195.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:35.528Z,1516400195.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:35.899Z,1516400195.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:35.935Z,1516400195.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:36.301Z,1516400196.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:36.327Z,1516400196.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:36.697Z,1516400196.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:36.732Z,1516400196.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:37.100Z,1516400197.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:37.126Z,1516400197.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:37.518Z,1516400197.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:37.539Z,1516400197.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:37.919Z,1516400197.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:37.934Z,1516400197.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:38.323Z,1516400198.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:38.343Z,1516400198.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:38.703Z,1516400198.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:38.729Z,1516400198.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:39.099Z,1516400199.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:39.128Z,1516400199.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:39.504Z,1516400199.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:39.531Z,1516400199.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:39.899Z,1516400199.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:39.927Z,1516400199.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:40.325Z,1516400200.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:40.339Z,1516400200.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:40.716Z,1516400200.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:40.747Z,1516400200.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:41.123Z,1516400201.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:41.137Z,1516400201.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:41.496Z,1516400201.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:41.534Z,1516400201.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:41.898Z,1516400201.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:41.920Z,1516400201.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:42.299Z,1516400202.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:42.335Z,1516400202.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:42.704Z,1516400202.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:42.736Z,1516400202.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:43.103Z,1516400203.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:43.135Z,1516400203.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:43.531Z,1516400203.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:43.546Z,1516400203.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:43.923Z,1516400203.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:43.938Z,1516400203.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:44.310Z,1516400204.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:44.336Z,1516400204.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:44.699Z,1516400204.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:44.735Z,1516400204.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:45.103Z,1516400205.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:45.136Z,1516400205.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:45.498Z,1516400205.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:45.525Z,1516400205.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:45.900Z,1516400205.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:45.939Z,1516400205.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:49.090Z,1516400209.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:49.104Z,1516400209.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:49.214Z,1516400209.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:49.247Z,1516400209.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:49.576Z,1516400209.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:49.591Z,1516400209.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:49.964Z,1516400209.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:49.990Z,1516400209.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:50.352Z,1516400210.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:50.367Z,1516400210.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:50.756Z,1516400210.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:50.770Z,1516400210.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:51.159Z,1516400211.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:51.173Z,1516400211.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:51.562Z,1516400211.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:51.576Z,1516400211.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:51.974Z,1516400211.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:52.003Z,1516400212.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:52.370Z,1516400212.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:52.403Z,1516400212.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:52.752Z,1516400212.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:52.766Z,1516400212.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:53.156Z,1516400213.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:53.170Z,1516400213.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:53.560Z,1516400213.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:53.574Z,1516400213.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:53.948Z,1516400213.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:53.975Z,1516400213.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:54.370Z,1516400214.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:54.399Z,1516400214.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:54.770Z,1516400214.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:54.799Z,1516400214.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:55.166Z,1516400215.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:55.180Z,1516400215.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:55.563Z,1516400215.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:55.583Z,1516400215.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:55.961Z,1516400215.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:55.974Z,1516400215.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:56.357Z,1516400216.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:56.371Z,1516400216.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:56.761Z,1516400216.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:56.775Z,1516400216.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:57.160Z,1516400217.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:57.174Z,1516400217.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:57.562Z,1516400217.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:57.576Z,1516400217.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:57.974Z,1516400217.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:57.988Z,1516400217.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:58.366Z,1516400218.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:58.386Z,1516400218.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:58.748Z,1516400218.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:58.779Z,1516400218.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:59.161Z,1516400219.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:59.175Z,1516400219.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:59.561Z,1516400219.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:59.574Z,1516400219.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:16:59.957Z,1516400219.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:16:59.972Z,1516400219.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:00.378Z,1516400220.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:00.392Z,1516400220.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:00.770Z,1516400220.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:00.784Z,1516400220.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:01.165Z,1516400221.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:01.180Z,1516400221.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:01.558Z,1516400221.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:01.576Z,1516400221.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:01.956Z,1516400221.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:01.974Z,1516400221.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:02.357Z,1516400222.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:02.371Z,1516400222.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:02.758Z,1516400222.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:02.786Z,1516400222.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:03.156Z,1516400223.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:03.174Z,1516400223.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:03.569Z,1516400223.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:03.591Z,1516400223.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:03.970Z,1516400223.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:03.984Z,1516400223.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:04.369Z,1516400224.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:04.383Z,1516400224.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:04.757Z,1516400224.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:04.771Z,1516400224.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:05.158Z,1516400225.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:05.173Z,1516400225.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:05.557Z,1516400225.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:05.570Z,1516400225.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:05.956Z,1516400225.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:05.975Z,1516400225.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:06.369Z,1516400226.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:06.383Z,1516400226.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:06.769Z,1516400226.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:06.783Z,1516400226.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:07.169Z,1516400227.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:07.183Z,1516400227.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:07.551Z,1516400227.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:07.585Z,1516400227.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:07.964Z,1516400227.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:07.982Z,1516400227.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:08.349Z,1516400228.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:08.376Z,1516400228.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:08.756Z,1516400228.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:08.782Z,1516400228.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:09.148Z,1516400229.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:09.180Z,1516400229.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:09.566Z,1516400229.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:09.588Z,1516400229.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:09.975Z,1516400229.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:09.989Z,1516400229.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:10.376Z,1516400230.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:10.389Z,1516400230.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:10.749Z,1516400230.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:10.783Z,1516400230.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:11.151Z,1516400231.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:11.177Z,1516400231.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:11.548Z,1516400231.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:11.580Z,1516400231.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:11.950Z,1516400231.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:11.976Z,1516400231.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:12.370Z,1516400232.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:12.391Z,1516400232.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:12.771Z,1516400232.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:12.786Z,1516400232.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:13.170Z,1516400233.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:13.185Z,1516400233.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:13.551Z,1516400233.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:13.578Z,1516400233.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:13.955Z,1516400233.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:13.991Z,1516400233.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:14.347Z,1516400234.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:14.387Z,1516400234.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:14.756Z,1516400234.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:14.786Z,1516400234.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:15.155Z,1516400235.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:15.169Z,1516400235.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:15.558Z,1516400235.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:15.572Z,1516400235.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:15.970Z,1516400235.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:15.992Z,1516400235.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:16.365Z,1516400236.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:16.399Z,1516400236.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:16.746Z,1516400236.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:16.768Z,1516400236.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:17.161Z,1516400237.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:17.176Z,1516400237.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:17.561Z,1516400237.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:17.575Z,1516400237.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:17.954Z,1516400237.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:17.968Z,1516400237.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:18.370Z,1516400238.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:18.400Z,1516400238.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:18.770Z,1516400238.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:18.784Z,1516400238.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:19.170Z,1516400239.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:19.184Z,1516400239.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:19.560Z,1516400239.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:19.579Z,1516400239.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:19.956Z,1516400239.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:19.993Z,1516400239.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:20.357Z,1516400240.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:20.375Z,1516400240.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:20.758Z,1516400240.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:20.778Z,1516400240.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:21.151Z,1516400241.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:21.183Z,1516400241.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:21.567Z,1516400241.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:21.594Z,1516400241.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:21.973Z,1516400241.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:21.995Z,1516400241.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:22.375Z,1516400242.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:22.388Z,1516400242.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:22.745Z,1516400242.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:22.776Z,1516400242.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:23.164Z,1516400243.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:23.179Z,1516400243.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:23.552Z,1516400243.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:23.579Z,1516400243.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:23.949Z,1516400243.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:23.984Z,1516400243.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:24.371Z,1516400244.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:24.386Z,1516400244.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:24.775Z,1516400244.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:24.790Z,1516400244.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:25.170Z,1516400245.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:25.188Z,1516400245.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:25.552Z,1516400245.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:25.578Z,1516400245.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:25.947Z,1516400245.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:25.983Z,1516400245.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:26.351Z,1516400246.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:26.382Z,1516400246.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:26.756Z,1516400246.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:26.783Z,1516400246.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:27.151Z,1516400247.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:27.185Z,1516400247.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:27.566Z,1516400247.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:27.589Z,1516400247.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:27.982Z,1516400247.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:27.996Z,1516400247.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:28.374Z,1516400248.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:28.389Z,1516400248.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:28.749Z,1516400248.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:28.772Z,1516400248.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:29.155Z,1516400249.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:29.186Z,1516400249.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:29.551Z,1516400249.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:29.588Z,1516400249.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:29.949Z,1516400249.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:29.964Z,1516400249.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:30.366Z,1516400250.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:30.391Z,1516400250.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:30.762Z,1516400250.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:30.788Z,1516400250.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:31.158Z,1516400251.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:31.190Z,1516400251.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:31.559Z,1516400251.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:31.590Z,1516400251.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:31.951Z,1516400251.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:31.994Z,1516400251.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:32.345Z,1516400252.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:32.359Z,1516400252.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:32.754Z,1516400252.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:32.790Z,1516400252.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:33.152Z,1516400253.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:33.194Z,1516400253.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:33.558Z,1516400253.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:33.593Z,1516400253.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:33.970Z,1516400253.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:33.995Z,1516400253.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:34.363Z,1516400254.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:34.396Z,1516400254.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:34.749Z,1516400254.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:34.764Z,1516400254.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:35.155Z,1516400255.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:35.191Z,1516400255.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:35.560Z,1516400255.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:35.574Z,1516400255.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:35.950Z,1516400255.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:35.976Z,1516400255.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:36.370Z,1516400256.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:36.399Z,1516400256.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:36.770Z,1516400256.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:36.796Z,1516400256.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:37.174Z,1516400257.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:37.203Z,1516400257.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:37.559Z,1516400257.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:37.573Z,1516400257.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:37.963Z,1516400257.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:37.977Z,1516400257.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:38.353Z,1516400258.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:38.380Z,1516400258.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:38.761Z,1516400258.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:38.776Z,1516400258.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:39.161Z,1516400259.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:39.175Z,1516400259.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:39.563Z,1516400259.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:39.577Z,1516400259.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:39.974Z,1516400259.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:40.003Z,1516400260.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:40.374Z,1516400260.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:40.405Z,1516400260.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:40.750Z,1516400260.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:40.779Z,1516400260.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:41.164Z,1516400261.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:41.178Z,1516400261.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:41.562Z,1516400261.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:41.576Z,1516400261.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:41.954Z,1516400261.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:41.986Z,1516400261.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:42.368Z,1516400262.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:42.383Z,1516400262.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:42.767Z,1516400262.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:42.803Z,1516400262.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:43.170Z,1516400263.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:43.184Z,1516400263.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:43.563Z,1516400263.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:43.577Z,1516400263.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:43.963Z,1516400263.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:43.977Z,1516400263.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:44.360Z,1516400264.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:44.374Z,1516400264.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:44.762Z,1516400264.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:44.776Z,1516400264.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:45.165Z,1516400265.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:45.179Z,1516400265.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:45.567Z,1516400265.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:45.587Z,1516400265.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:45.971Z,1516400265.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:45.986Z,1516400265.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:49.078Z,1516400269.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:49.092Z,1516400269.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:49.188Z,1516400269.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:49.223Z,1516400269.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:49.574Z,1516400269.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:49.588Z,1516400269.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:49.977Z,1516400269.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:49.992Z,1516400269.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:50.377Z,1516400270.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:50.415Z,1516400270.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:50.790Z,1516400270.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:50.821Z,1516400270.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:51.179Z,1516400271.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:51.193Z,1516400271.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:51.570Z,1516400271.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:51.589Z,1516400271.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:51.972Z,1516400271.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:51.987Z,1516400271.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:52.375Z,1516400272.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:52.390Z,1516400272.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:52.766Z,1516400272.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:52.789Z,1516400272.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:53.179Z,1516400273.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:53.194Z,1516400273.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:53.581Z,1516400273.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:53.611Z,1516400273.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:53.990Z,1516400273.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:54.004Z,1516400274.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:54.382Z,1516400274.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:54.397Z,1516400274.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:54.773Z,1516400274.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:54.795Z,1516400274.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:55.159Z,1516400275.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:55.214Z,1516400275.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:55.579Z,1516400275.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:55.593Z,1516400275.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:55.974Z,1516400275.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:55.993Z,1516400275.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:56.377Z,1516400276.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:56.400Z,1516400276.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:56.793Z,1516400276.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:56.807Z,1516400276.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:57.190Z,1516400277.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:57.204Z,1516400277.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:57.562Z,1516400277.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:57.587Z,1516400277.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:57.965Z,1516400277.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:57.999Z,1516400277.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:58.364Z,1516400278.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:58.407Z,1516400278.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:58.781Z,1516400278.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:58.788Z,1516400278.788 [PNI_TCM](ERROR): CRC does not match. Expected:0x1036 got:0x48156
2018-01-19T22:17:58.815Z,1516400278.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:59.167Z,1516400279.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:59.194Z,1516400279.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:59.584Z,1516400279.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:17:59.599Z,1516400279.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:17:59.986Z,1516400279.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:00.000Z,1516400280.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:00.379Z,1516400280.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:00.411Z,1516400280.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:00.770Z,1516400280.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:00.798Z,1516400280.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:01.162Z,1516400281.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:01.192Z,1516400281.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:01.565Z,1516400281.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:01.606Z,1516400281.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:01.963Z,1516400281.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:01.993Z,1516400281.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:02.390Z,1516400282.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:02.405Z,1516400282.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:02.779Z,1516400282.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:02.815Z,1516400282.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:03.179Z,1516400283.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:03.208Z,1516400283.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:03.572Z,1516400283.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:03.604Z,1516400283.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:03.974Z,1516400283.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:03.000Z,1516400284.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:04.370Z,1516400284.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:04.384Z,1516400284.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:04.801Z,1516400284.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:04.835Z,1516400284.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:05.169Z,1516400285.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:05.211Z,1516400285.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:05.584Z,1516400285.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:05.591Z,1516400285.591 [PNI_TCM](ERROR): CRC does not match. Expected:0x56568 got:0x29395
2018-01-19T22:18:05.614Z,1516400285.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:05.986Z,1516400285.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:06.009Z,1516400286.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:06.388Z,1516400286.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:06.414Z,1516400286.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:06.776Z,1516400286.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:06.809Z,1516400286.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:07.174Z,1516400287.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:07.183Z,1516400287.183 [PNI_TCM](ERROR): CRC does not match. Expected:0x62805 got:0x42688
2018-01-19T22:18:07.219Z,1516400287.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:07.579Z,1516400287.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:07.612Z,1516400287.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:07.966Z,1516400287.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:08.006Z,1516400288.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:08.390Z,1516400288.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:08.412Z,1516400288.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:08.784Z,1516400288.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:08.815Z,1516400288.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:09.186Z,1516400289.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:09.223Z,1516400289.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:09.572Z,1516400289.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:09.615Z,1516400289.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:09.970Z,1516400289.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:09.988Z,1516400289.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:10.368Z,1516400290.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:10.386Z,1516400290.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:10.774Z,1516400290.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:10.789Z,1516400290.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:11.169Z,1516400291.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:11.210Z,1516400291.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:11.573Z,1516400291.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:11.591Z,1516400291.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:11.988Z,1516400291.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:12.018Z,1516400292.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:12.376Z,1516400292.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:12.395Z,1516400292.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:12.772Z,1516400292.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:12.821Z,1516400292.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:13.172Z,1516400293.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:13.194Z,1516400293.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:13.575Z,1516400293.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:13.593Z,1516400293.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:13.978Z,1516400293.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:13.992Z,1516400293.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:14.378Z,1516400294.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:14.418Z,1516400294.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:14.778Z,1516400294.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:14.795Z,1516400294.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:15.178Z,1516400295.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:15.196Z,1516400295.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:15.569Z,1516400295.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:15.587Z,1516400295.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:15.975Z,1516400295.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:15.995Z,1516400295.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:16.375Z,1516400296.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:16.389Z,1516400296.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:16.775Z,1516400296.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:16.794Z,1516400296.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:17.176Z,1516400297.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:17.193Z,1516400297.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:17.578Z,1516400297.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:17.622Z,1516400297.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:17.982Z,1516400297.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:17.999Z,1516400297.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:18.378Z,1516400298.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:18.397Z,1516400298.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:18.777Z,1516400298.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:18.793Z,1516400298.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:19.171Z,1516400299.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:19.203Z,1516400299.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:19.575Z,1516400299.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:19.595Z,1516400299.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:19.968Z,1516400299.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:19.982Z,1516400299.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:20.380Z,1516400300.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:20.396Z,1516400300.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:20.782Z,1516400300.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:20.826Z,1516400300.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:21.177Z,1516400301.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:21.191Z,1516400301.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:21.571Z,1516400301.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:21.585Z,1516400301.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:21.974Z,1516400301.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:21.992Z,1516400301.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:22.368Z,1516400302.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:22.382Z,1516400302.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:22.771Z,1516400302.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:22.789Z,1516400302.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:23.176Z,1516400303.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:23.197Z,1516400303.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:23.578Z,1516400303.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:23.596Z,1516400303.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:23.978Z,1516400303.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:23.992Z,1516400303.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:24.376Z,1516400304.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:24.395Z,1516400304.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:24.776Z,1516400304.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:24.790Z,1516400304.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:25.172Z,1516400305.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:25.187Z,1516400305.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:25.575Z,1516400305.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:25.590Z,1516400305.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:25.976Z,1516400305.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:25.990Z,1516400305.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:26.378Z,1516400306.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:26.393Z,1516400306.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:26.782Z,1516400306.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:26.800Z,1516400306.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:27.178Z,1516400307.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:27.192Z,1516400307.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:27.573Z,1516400307.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:27.587Z,1516400307.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:27.975Z,1516400307.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:27.989Z,1516400307.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:28.369Z,1516400308.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:28.383Z,1516400308.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:28.771Z,1516400308.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:28.790Z,1516400308.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:29.175Z,1516400309.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:29.189Z,1516400309.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:29.578Z,1516400309.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:29.598Z,1516400309.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:29.983Z,1516400309.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:30.001Z,1516400310.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:30.381Z,1516400310.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:30.396Z,1516400310.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:30.766Z,1516400310.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:30.791Z,1516400310.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:30.791Z,1516400310.791 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-01-19T22:18:30.791Z,1516400310.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:18:30.793Z,1516400310.793 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:30.793Z,1516400310.793 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-01-19T22:18:30.793Z,1516400310.793 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:18:30.795Z,1516400310.795 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:30.795Z,1516400310.795 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2018-01-19T22:18:30.795Z,1516400310.795 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:18:30.819Z,1516400310.819 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:18:30.819Z,1516400310.819 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:18:30.820Z,1516400310.820 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:18:31.181Z,1516400311.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:31.231Z,1516400311.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:18:31.231Z,1516400311.231 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-01-19T22:18:31.232Z,1516400311.232 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:18:31.232Z,1516400311.232 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-01-19T22:18:31.232Z,1516400311.232 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:18:31.232Z,1516400311.232 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2018-01-19T22:18:31.564Z,1516400311.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:31.594Z,1516400311.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:18:31.595Z,1516400311.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:18:31.595Z,1516400311.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:18:31.596Z,1516400311.596 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:18:31.596Z,1516400311.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:18:31.601Z,1516400311.601 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:18:31.602Z,1516400311.602 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:18:31.603Z,1516400311.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:18:31.603Z,1516400311.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:18:31.959Z,1516400311.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:31.998Z,1516400311.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:18:31.999Z,1516400311.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:32.378Z,1516400312.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:32.404Z,1516400312.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:18:32.405Z,1516400312.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:32.778Z,1516400312.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:32.822Z,1516400312.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:18:32.823Z,1516400312.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:33.182Z,1516400313.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:33.214Z,1516400313.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:18:33.215Z,1516400313.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:33.572Z,1516400313.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:33.602Z,1516400313.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:18:33.603Z,1516400313.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:33.969Z,1516400313.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:33.983Z,1516400313.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:18:33.983Z,1516400313.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:34.409Z,1516400314.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:34.426Z,1516400314.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T22:18:34.427Z,1516400314.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:34.787Z,1516400314.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:34.803Z,1516400314.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T22:18:34.804Z,1516400314.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:35.184Z,1516400315.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:35.207Z,1516400315.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T22:18:35.208Z,1516400315.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:35.566Z,1516400315.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:35.596Z,1516400315.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T22:18:35.597Z,1516400315.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:35.966Z,1516400315.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:36.003Z,1516400316.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T22:18:36.004Z,1516400316.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:36.376Z,1516400316.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:36.416Z,1516400316.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T22:18:36.422Z,1516400316.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:36.795Z,1516400316.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:36.808Z,1516400316.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T22:18:36.809Z,1516400316.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:37.180Z,1516400317.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:37.215Z,1516400317.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T22:18:37.215Z,1516400317.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:37.574Z,1516400317.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:37.609Z,1516400317.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:18:37.610Z,1516400317.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:37.977Z,1516400317.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:38.024Z,1516400318.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:18:38.025Z,1516400318.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:38.379Z,1516400318.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:38.408Z,1516400318.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:18:38.413Z,1516400318.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:38.788Z,1516400318.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:38.819Z,1516400318.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:18:38.820Z,1516400318.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:39.185Z,1516400319.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:39.254Z,1516400319.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-01-19T22:18:39.255Z,1516400319.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:39.575Z,1516400319.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:39.623Z,1516400319.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:18:39.624Z,1516400319.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:39.978Z,1516400319.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:40.025Z,1516400320.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:18:40.026Z,1516400320.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:40.384Z,1516400320.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:40.478Z,1516400320.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-01-19T22:18:40.479Z,1516400320.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:40.780Z,1516400320.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:40.799Z,1516400320.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:18:40.800Z,1516400320.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:41.181Z,1516400321.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:41.226Z,1516400321.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:18:41.227Z,1516400321.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:41.574Z,1516400321.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:41.619Z,1516400321.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:18:41.620Z,1516400321.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:41.971Z,1516400321.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:41.993Z,1516400321.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:18:41.994Z,1516400321.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:42.396Z,1516400322.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:42.439Z,1516400322.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:18:42.440Z,1516400322.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:42.804Z,1516400322.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:42.876Z,1516400322.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-01-19T22:18:42.877Z,1516400322.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:43.185Z,1516400323.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:43.233Z,1516400323.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T22:18:43.234Z,1516400323.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:43.584Z,1516400323.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:43.598Z,1516400323.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T22:18:43.599Z,1516400323.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:43.976Z,1516400323.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:43.990Z,1516400323.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T22:18:43.991Z,1516400323.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:44.375Z,1516400324.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:44.398Z,1516400324.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T22:18:44.399Z,1516400324.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:44.791Z,1516400324.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:44.810Z,1516400324.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T22:18:44.811Z,1516400324.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:45.186Z,1516400325.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:45.201Z,1516400325.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T22:18:45.202Z,1516400325.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:45.560Z,1516400325.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:45.590Z,1516400325.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:18:45.591Z,1516400325.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:45.968Z,1516400325.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:45.999Z,1516400325.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:18:45.000Z,1516400326.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:49.090Z,1516400329.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:49.104Z,1516400329.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-01-19T22:18:49.105Z,1516400329.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:49.214Z,1516400329.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:49.246Z,1516400329.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-19T22:18:49.247Z,1516400329.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:49.580Z,1516400329.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:49.594Z,1516400329.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T22:18:49.595Z,1516400329.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:49.960Z,1516400329.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:49.990Z,1516400329.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T22:18:49.990Z,1516400329.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:50.352Z,1516400330.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:50.366Z,1516400330.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T22:18:50.367Z,1516400330.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:50.756Z,1516400330.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:50.770Z,1516400330.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T22:18:50.771Z,1516400330.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:51.152Z,1516400331.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:51.166Z,1516400331.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:51.562Z,1516400331.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:51.576Z,1516400331.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:51.974Z,1516400331.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:51.997Z,1516400331.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:52.362Z,1516400332.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:52.400Z,1516400332.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:52.749Z,1516400332.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:52.769Z,1516400332.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:53.159Z,1516400333.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:53.175Z,1516400333.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:53.561Z,1516400333.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:53.575Z,1516400333.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:53.952Z,1516400333.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:53.967Z,1516400333.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:54.374Z,1516400334.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:54.395Z,1516400334.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:54.762Z,1516400334.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:54.776Z,1516400334.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:55.158Z,1516400335.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:55.173Z,1516400335.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:55.559Z,1516400335.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:55.573Z,1516400335.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:55.955Z,1516400335.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:55.975Z,1516400335.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:56.358Z,1516400336.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:56.373Z,1516400336.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:56.770Z,1516400336.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:56.784Z,1516400336.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:57.173Z,1516400337.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:57.187Z,1516400337.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:57.548Z,1516400337.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:57.570Z,1516400337.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:57.959Z,1516400337.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:57.973Z,1516400337.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:58.360Z,1516400338.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:58.374Z,1516400338.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:58.762Z,1516400338.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:58.798Z,1516400338.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:59.172Z,1516400339.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:59.191Z,1516400339.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:59.574Z,1516400339.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:59.588Z,1516400339.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:18:59.945Z,1516400339.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:18:59.979Z,1516400339.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:00.354Z,1516400340.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:00.376Z,1516400340.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:00.756Z,1516400340.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:00.770Z,1516400340.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:01.155Z,1516400341.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:01.175Z,1516400341.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:01.563Z,1516400341.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:01.593Z,1516400341.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:01.974Z,1516400341.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:01.998Z,1516400341.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:02.358Z,1516400342.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:02.375Z,1516400342.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:02.759Z,1516400342.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:02.775Z,1516400342.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:03.159Z,1516400343.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:03.173Z,1516400343.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:03.560Z,1516400343.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:03.575Z,1516400343.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:03.957Z,1516400343.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:03.971Z,1516400343.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:04.374Z,1516400344.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:04.397Z,1516400344.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:04.758Z,1516400344.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:04.773Z,1516400344.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:05.170Z,1516400345.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:05.199Z,1516400345.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:05.557Z,1516400345.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:05.575Z,1516400345.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:05.952Z,1516400345.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:05.972Z,1516400345.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:06.361Z,1516400346.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:06.375Z,1516400346.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:06.770Z,1516400346.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:06.801Z,1516400346.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:07.174Z,1516400347.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:07.196Z,1516400347.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:07.567Z,1516400347.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:07.597Z,1516400347.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:07.955Z,1516400347.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:07.971Z,1516400347.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:08.357Z,1516400348.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:08.372Z,1516400348.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:08.761Z,1516400348.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:08.776Z,1516400348.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:09.160Z,1516400349.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:09.175Z,1516400349.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:09.558Z,1516400349.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:09.573Z,1516400349.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:09.974Z,1516400349.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:09.996Z,1516400349.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:10.358Z,1516400350.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:10.375Z,1516400350.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:10.756Z,1516400350.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:10.771Z,1516400350.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:10.797Z,1516400350.797 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T22:19:11.156Z,1516400351.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:11.175Z,1516400351.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:11.561Z,1516400351.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:11.575Z,1516400351.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:11.951Z,1516400351.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:11.973Z,1516400351.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:12.361Z,1516400352.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:12.375Z,1516400352.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:12.774Z,1516400352.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:12.788Z,1516400352.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:13.174Z,1516400353.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:13.206Z,1516400353.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:13.574Z,1516400353.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:13.588Z,1516400353.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:13.965Z,1516400353.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:13.979Z,1516400353.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:14.356Z,1516400354.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:14.378Z,1516400354.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:14.765Z,1516400354.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:14.779Z,1516400354.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:15.163Z,1516400355.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:15.177Z,1516400355.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:15.571Z,1516400355.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:15.586Z,1516400355.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:15.971Z,1516400355.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:15.985Z,1516400355.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:16.370Z,1516400356.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:16.384Z,1516400356.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:16.745Z,1516400356.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:16.776Z,1516400356.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:17.163Z,1516400357.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:17.183Z,1516400357.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:17.547Z,1516400357.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:17.575Z,1516400357.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:17.950Z,1516400357.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:17.976Z,1516400357.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:18.359Z,1516400358.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:18.385Z,1516400358.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:18.758Z,1516400358.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:18.788Z,1516400358.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:19.162Z,1516400359.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:19.187Z,1516400359.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:19.563Z,1516400359.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:19.588Z,1516400359.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:19.947Z,1516400359.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:19.966Z,1516400359.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:20.356Z,1516400360.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:20.390Z,1516400360.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:20.752Z,1516400360.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:20.767Z,1516400360.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:21.155Z,1516400361.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:21.170Z,1516400361.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:21.558Z,1516400361.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:21.589Z,1516400361.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:21.975Z,1516400361.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:22.003Z,1516400362.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:22.370Z,1516400362.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:22.395Z,1516400362.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:22.747Z,1516400362.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:22.773Z,1516400362.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:23.156Z,1516400363.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:23.178Z,1516400363.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:23.560Z,1516400363.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:23.574Z,1516400363.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:23.952Z,1516400363.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:23.971Z,1516400363.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:24.360Z,1516400364.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:24.375Z,1516400364.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:24.774Z,1516400364.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:24.796Z,1516400364.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:25.170Z,1516400365.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:25.199Z,1516400365.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:25.566Z,1516400365.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:25.597Z,1516400365.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:25.956Z,1516400365.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:25.990Z,1516400365.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:26.349Z,1516400366.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:26.375Z,1516400366.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:26.761Z,1516400366.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:26.783Z,1516400366.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:27.160Z,1516400367.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:27.174Z,1516400367.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:27.559Z,1516400367.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:27.575Z,1516400367.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:27.974Z,1516400367.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:28.003Z,1516400368.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:28.374Z,1516400368.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:28.405Z,1516400368.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:28.748Z,1516400368.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:28.774Z,1516400368.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:29.159Z,1516400369.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:29.175Z,1516400369.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:29.556Z,1516400369.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:29.575Z,1516400369.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:29.948Z,1516400369.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:29.983Z,1516400369.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:30.358Z,1516400370.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:30.376Z,1516400370.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:30.766Z,1516400370.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:30.781Z,1516400370.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:31.170Z,1516400371.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:31.185Z,1516400371.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:31.568Z,1516400371.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:31.591Z,1516400371.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:31.964Z,1516400371.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:31.983Z,1516400371.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:32.363Z,1516400372.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:32.383Z,1516400372.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:32.764Z,1516400372.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:32.778Z,1516400372.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:33.156Z,1516400373.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:33.170Z,1516400373.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:33.565Z,1516400373.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:33.580Z,1516400373.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:33.970Z,1516400373.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:33.984Z,1516400373.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:34.369Z,1516400374.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:34.383Z,1516400374.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:34.756Z,1516400374.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:34.774Z,1516400374.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:35.154Z,1516400375.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:35.176Z,1516400375.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:35.556Z,1516400375.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:35.583Z,1516400375.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:35.958Z,1516400375.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:35.972Z,1516400375.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:36.358Z,1516400376.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:36.373Z,1516400376.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:36.769Z,1516400376.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:36.790Z,1516400376.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:37.168Z,1516400377.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:37.191Z,1516400377.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:37.569Z,1516400377.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:37.584Z,1516400377.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:37.960Z,1516400377.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:37.975Z,1516400377.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:38.363Z,1516400378.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:38.383Z,1516400378.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:38.758Z,1516400378.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:38.777Z,1516400378.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:39.154Z,1516400379.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:39.192Z,1516400379.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:39.562Z,1516400379.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:39.592Z,1516400379.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:39.973Z,1516400379.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:39.987Z,1516400379.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:40.371Z,1516400380.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:40.385Z,1516400380.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:40.745Z,1516400380.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:40.772Z,1516400380.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:41.151Z,1516400381.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:41.176Z,1516400381.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:41.551Z,1516400381.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:41.583Z,1516400381.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:41.949Z,1516400381.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:41.979Z,1516400381.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:42.355Z,1516400382.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:42.380Z,1516400382.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:42.772Z,1516400382.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:42.786Z,1516400382.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:43.170Z,1516400383.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:43.187Z,1516400383.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:43.570Z,1516400383.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:43.585Z,1516400383.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:43.952Z,1516400383.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:43.990Z,1516400383.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:44.355Z,1516400384.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:44.387Z,1516400384.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:44.751Z,1516400384.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:44.786Z,1516400384.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:45.156Z,1516400385.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:45.192Z,1516400385.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:45.195Z,1516400385.195 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T22:14:45.1Z
2018-01-19T22:19:45.196Z,1516400385.196 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T22:19:45.196Z,1516400385.196 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T22:19:45.558Z,1516400385.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:45.592Z,1516400385.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:46.022Z,1516400386.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:46.037Z,1516400386.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:46.363Z,1516400386.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:46.399Z,1516400386.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:49.447Z,1516400389.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:49.462Z,1516400389.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:49.549Z,1516400389.549 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0028.lzma
2018-01-19T22:19:49.570Z,1516400389.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:49.619Z,1516400389.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:49.958Z,1516400389.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:49.993Z,1516400389.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:50.320Z,1516400390.320 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0028.lzma.bak
2018-01-19T22:19:50.320Z,1516400390.320 [DataOverHttps](INFO): SBD MOMSN=7724434
2018-01-19T22:19:50.406Z,1516400390.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:50.420Z,1516400390.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:50.846Z,1516400390.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:50.860Z,1516400390.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:51.150Z,1516400391.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:51.165Z,1516400391.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:54.239Z,1516400394.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:54.254Z,1516400394.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:54.348Z,1516400394.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:54.390Z,1516400394.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:54.719Z,1516400394.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:54.740Z,1516400394.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:55.130Z,1516400395.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:55.144Z,1516400395.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:55.514Z,1516400395.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:55.543Z,1516400395.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:55.907Z,1516400395.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:55.938Z,1516400395.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:58.992Z,1516400398.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:59.015Z,1516400399.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:59.093Z,1516400399.093 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180119T210901/Express0029.lzma
2018-01-19T22:19:59.123Z,1516400399.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:59.162Z,1516400399.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:59.478Z,1516400399.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:59.492Z,1516400399.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:19:59.843Z,1516400399.843 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0029.lzma.bak
2018-01-19T22:19:59.843Z,1516400399.843 [DataOverHttps](INFO): SBD MOMSN=7724436
2018-01-19T22:19:59.904Z,1516400399.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:19:59.922Z,1516400399.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:00.366Z,1516400400.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:00.381Z,1516400400.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:00.384Z,1516400400.384 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T22:20:00.384Z,1516400400.384 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T22:20:00.384Z,1516400400.384 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T22:20:00.669Z,1516400400.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:00.687Z,1516400400.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:03.776Z,1516400403.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:03.790Z,1516400403.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:03.884Z,1516400403.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:03.926Z,1516400403.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:04.290Z,1516400404.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:04.320Z,1516400404.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:04.694Z,1516400404.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:04.722Z,1516400404.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:05.078Z,1516400405.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:05.092Z,1516400405.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:05.483Z,1516400405.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:05.499Z,1516400405.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:05.879Z,1516400405.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:05.893Z,1516400405.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:06.275Z,1516400406.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:06.289Z,1516400406.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:06.686Z,1516400406.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:06.701Z,1516400406.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:07.094Z,1516400407.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:07.123Z,1516400407.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:07.490Z,1516400407.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:07.522Z,1516400407.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:07.876Z,1516400407.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:07.895Z,1516400407.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:08.276Z,1516400408.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:08.296Z,1516400408.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:08.681Z,1516400408.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:08.695Z,1516400408.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:09.080Z,1516400409.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:09.095Z,1516400409.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:09.494Z,1516400409.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:09.525Z,1516400409.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:09.878Z,1516400409.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:09.892Z,1516400409.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:10.286Z,1516400410.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:10.300Z,1516400410.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:10.681Z,1516400410.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:10.699Z,1516400410.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:11.073Z,1516400411.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:11.087Z,1516400411.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:11.486Z,1516400411.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:11.500Z,1516400411.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:11.890Z,1516400411.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:11.924Z,1516400411.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:12.312Z,1516400412.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:12.331Z,1516400412.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:12.679Z,1516400412.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:12.699Z,1516400412.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:13.081Z,1516400413.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:13.095Z,1516400413.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:13.478Z,1516400413.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:13.493Z,1516400413.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:13.890Z,1516400413.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:13.921Z,1516400413.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:14.294Z,1516400414.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:14.325Z,1516400414.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:14.679Z,1516400414.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:14.699Z,1516400414.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:15.081Z,1516400415.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:15.095Z,1516400415.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:15.494Z,1516400415.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:15.525Z,1516400415.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:15.890Z,1516400415.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:15.922Z,1516400415.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:16.294Z,1516400416.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:16.323Z,1516400416.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:16.680Z,1516400416.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:16.699Z,1516400416.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:17.073Z,1516400417.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:17.095Z,1516400417.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:17.487Z,1516400417.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:17.501Z,1516400417.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:17.895Z,1516400417.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:17.924Z,1516400417.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:18.278Z,1516400418.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:18.293Z,1516400418.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:18.681Z,1516400418.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:18.696Z,1516400418.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:19.077Z,1516400419.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:19.095Z,1516400419.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:19.495Z,1516400419.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:19.523Z,1516400419.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:19.886Z,1516400419.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:19.901Z,1516400419.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:20.286Z,1516400420.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:20.301Z,1516400420.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:20.682Z,1516400420.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:20.696Z,1516400420.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:21.082Z,1516400421.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:21.096Z,1516400421.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:21.494Z,1516400421.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:21.525Z,1516400421.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:21.886Z,1516400421.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:21.900Z,1516400421.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:22.286Z,1516400422.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:22.300Z,1516400422.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:22.684Z,1516400422.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:22.699Z,1516400422.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:23.078Z,1516400423.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:23.098Z,1516400423.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:23.478Z,1516400423.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:23.498Z,1516400423.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:23.886Z,1516400423.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:23.901Z,1516400423.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:24.283Z,1516400424.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:24.306Z,1516400424.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:24.691Z,1516400424.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:24.711Z,1516400424.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:25.079Z,1516400425.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:25.094Z,1516400425.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:25.470Z,1516400425.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:25.501Z,1516400425.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:25.887Z,1516400425.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:25.901Z,1516400425.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:26.267Z,1516400426.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:26.300Z,1516400426.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:26.687Z,1516400426.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:26.718Z,1516400426.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:27.098Z,1516400427.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:27.112Z,1516400427.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:27.495Z,1516400427.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:27.510Z,1516400427.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:27.884Z,1516400427.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:27.899Z,1516400427.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:28.286Z,1516400428.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:28.306Z,1516400428.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:28.668Z,1516400428.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:28.700Z,1516400428.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:29.068Z,1516400429.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:29.103Z,1516400429.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:29.471Z,1516400429.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:29.507Z,1516400429.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:29.896Z,1516400429.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:29.910Z,1516400429.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:30.290Z,1516400430.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:30.320Z,1516400430.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:30.691Z,1516400430.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:30.711Z,1516400430.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:31.067Z,1516400431.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:31.105Z,1516400431.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:31.469Z,1516400431.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:31.499Z,1516400431.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:31.876Z,1516400431.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:31.907Z,1516400431.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:32.267Z,1516400432.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:32.312Z,1516400432.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:32.695Z,1516400432.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:32.710Z,1516400432.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:33.094Z,1516400433.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:33.108Z,1516400433.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:33.478Z,1516400433.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:33.507Z,1516400433.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:33.875Z,1516400433.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:33.919Z,1516400433.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:34.275Z,1516400434.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:34.306Z,1516400434.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:34.666Z,1516400434.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:34.710Z,1516400434.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:35.070Z,1516400435.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:35.084Z,1516400435.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:35.471Z,1516400435.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:35.486Z,1516400435.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:35.890Z,1516400435.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:35.914Z,1516400435.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:36.300Z,1516400436.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:36.319Z,1516400436.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:36.690Z,1516400436.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:36.719Z,1516400436.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:37.076Z,1516400437.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:37.114Z,1516400437.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:37.473Z,1516400437.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:37.487Z,1516400437.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:37.880Z,1516400437.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:37.914Z,1516400437.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:38.279Z,1516400438.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:38.293Z,1516400438.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:38.690Z,1516400438.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:38.722Z,1516400438.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:39.098Z,1516400439.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:39.127Z,1516400439.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:39.490Z,1516400439.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:39.523Z,1516400439.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:39.872Z,1516400439.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:39.886Z,1516400439.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:40.279Z,1516400440.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:40.298Z,1516400440.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:40.672Z,1516400440.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:40.686Z,1516400440.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:41.080Z,1516400441.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:41.094Z,1516400441.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:41.476Z,1516400441.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:41.495Z,1516400441.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:41.894Z,1516400441.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:41.917Z,1516400441.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:42.294Z,1516400442.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:42.315Z,1516400442.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:42.686Z,1516400442.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:42.700Z,1516400442.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:43.080Z,1516400443.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:43.094Z,1516400443.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:43.479Z,1516400443.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:43.499Z,1516400443.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:43.877Z,1516400443.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:43.891Z,1516400443.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:44.280Z,1516400444.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:44.294Z,1516400444.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:44.690Z,1516400444.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:44.704Z,1516400444.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:45.094Z,1516400445.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:45.108Z,1516400445.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:45.486Z,1516400445.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:45.506Z,1516400445.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:45.881Z,1516400445.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:45.895Z,1516400445.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:46.283Z,1516400446.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:46.297Z,1516400446.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:46.680Z,1516400446.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:46.694Z,1516400446.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:47.083Z,1516400447.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:47.103Z,1516400447.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:47.482Z,1516400447.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:47.496Z,1516400447.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:47.886Z,1516400447.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:47.900Z,1516400447.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:48.290Z,1516400448.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:48.304Z,1516400448.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:48.686Z,1516400448.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:48.700Z,1516400448.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:49.083Z,1516400449.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:49.097Z,1516400449.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:49.480Z,1516400449.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:49.494Z,1516400449.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:49.885Z,1516400449.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:49.899Z,1516400449.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:50.284Z,1516400450.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:50.297Z,1516400450.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:50.686Z,1516400450.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:50.701Z,1516400450.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:51.088Z,1516400451.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:51.107Z,1516400451.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:51.490Z,1516400451.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:51.503Z,1516400451.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:51.884Z,1516400451.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:51.903Z,1516400451.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:52.283Z,1516400452.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:52.303Z,1516400452.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:52.684Z,1516400452.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:52.698Z,1516400452.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:53.084Z,1516400453.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:53.099Z,1516400453.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:53.484Z,1516400453.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:53.498Z,1516400453.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:53.890Z,1516400453.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:53.904Z,1516400453.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:54.290Z,1516400454.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:54.304Z,1516400454.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:54.689Z,1516400454.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:54.703Z,1516400454.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:55.085Z,1516400455.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:55.099Z,1516400455.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:55.484Z,1516400455.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:55.498Z,1516400455.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:55.885Z,1516400455.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:55.899Z,1516400455.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:56.278Z,1516400456.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:56.298Z,1516400456.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:56.689Z,1516400456.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:56.703Z,1516400456.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:57.091Z,1516400457.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:57.105Z,1516400457.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:57.491Z,1516400457.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:57.505Z,1516400457.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:57.885Z,1516400457.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:57.900Z,1516400457.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:58.283Z,1516400458.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:58.298Z,1516400458.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:58.689Z,1516400458.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:58.703Z,1516400458.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:59.083Z,1516400459.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:59.098Z,1516400459.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:59.480Z,1516400459.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:59.499Z,1516400459.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:20:59.891Z,1516400459.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:20:59.905Z,1516400459.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:00.290Z,1516400460.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:00.304Z,1516400460.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:00.690Z,1516400460.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:00.704Z,1516400460.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:01.087Z,1516400461.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:01.101Z,1516400461.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:04.183Z,1516400464.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:04.198Z,1516400464.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:04.303Z,1516400464.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:04.335Z,1516400464.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:04.664Z,1516400464.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:04.688Z,1516400464.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:05.067Z,1516400465.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:05.091Z,1516400465.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:05.463Z,1516400465.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:05.491Z,1516400465.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:05.856Z,1516400465.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:05.890Z,1516400465.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:06.244Z,1516400466.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:06.268Z,1516400466.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:06.654Z,1516400466.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:06.688Z,1516400466.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:07.054Z,1516400467.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:07.088Z,1516400467.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:07.451Z,1516400467.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:07.491Z,1516400467.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:07.864Z,1516400467.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:07.893Z,1516400467.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:08.281Z,1516400468.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:08.295Z,1516400468.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:08.662Z,1516400468.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:08.695Z,1516400468.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:09.051Z,1516400469.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:09.091Z,1516400469.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:09.451Z,1516400469.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:09.472Z,1516400469.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:09.850Z,1516400469.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:09.866Z,1516400469.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:10.254Z,1516400470.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:10.269Z,1516400470.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:10.666Z,1516400470.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:10.691Z,1516400470.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:11.068Z,1516400471.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:11.075Z,1516400471.075 [PNI_TCM](ERROR): CRC does not match. Expected:0x28708 got:0x1774
2018-01-19T22:21:11.096Z,1516400471.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:11.468Z,1516400471.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:11.494Z,1516400471.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:11.855Z,1516400471.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:11.869Z,1516400471.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:12.248Z,1516400472.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:12.297Z,1516400472.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:12.647Z,1516400472.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:12.666Z,1516400472.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:13.053Z,1516400473.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:13.078Z,1516400473.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:13.457Z,1516400473.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:13.471Z,1516400473.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:13.858Z,1516400473.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:13.896Z,1516400473.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:14.272Z,1516400474.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:14.303Z,1516400474.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:14.664Z,1516400474.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:14.679Z,1516400474.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:15.058Z,1516400475.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:15.072Z,1516400475.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:15.450Z,1516400475.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:15.487Z,1516400475.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:15.849Z,1516400475.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:15.866Z,1516400475.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:16.255Z,1516400476.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:16.273Z,1516400476.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:16.662Z,1516400476.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:16.676Z,1516400476.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:17.061Z,1516400477.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:17.101Z,1516400477.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:17.460Z,1516400477.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:17.482Z,1516400477.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:17.854Z,1516400477.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:17.872Z,1516400477.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:18.248Z,1516400478.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:18.270Z,1516400478.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:18.655Z,1516400478.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:18.675Z,1516400478.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:19.050Z,1516400479.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:19.069Z,1516400479.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:19.456Z,1516400479.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:19.474Z,1516400479.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:19.863Z,1516400479.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:19.878Z,1516400479.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:20.260Z,1516400480.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:20.302Z,1516400480.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:20.661Z,1516400480.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:20.675Z,1516400480.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:21.055Z,1516400481.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:21.078Z,1516400481.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:21.455Z,1516400481.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:21.473Z,1516400481.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:21.849Z,1516400481.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:21.870Z,1516400481.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:22.257Z,1516400482.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:22.271Z,1516400482.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:22.660Z,1516400482.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:22.679Z,1516400482.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:23.064Z,1516400483.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:23.079Z,1516400483.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:23.461Z,1516400483.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:23.504Z,1516400483.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:23.850Z,1516400483.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:23.868Z,1516400483.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:24.248Z,1516400484.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:24.262Z,1516400484.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:24.655Z,1516400484.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:24.676Z,1516400484.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:25.056Z,1516400485.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:25.070Z,1516400485.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:25.448Z,1516400485.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:25.466Z,1516400485.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:25.861Z,1516400485.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:25.886Z,1516400485.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:26.265Z,1516400486.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:26.282Z,1516400486.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:26.666Z,1516400486.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:26.705Z,1516400486.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:27.055Z,1516400487.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:27.075Z,1516400487.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:27.450Z,1516400487.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:27.475Z,1516400487.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:27.857Z,1516400487.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:27.874Z,1516400487.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:28.256Z,1516400488.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:28.270Z,1516400488.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:28.663Z,1516400488.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:28.677Z,1516400488.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:29.069Z,1516400489.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:29.087Z,1516400489.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:29.466Z,1516400489.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:29.491Z,1516400489.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:29.856Z,1516400489.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:29.871Z,1516400489.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:30.244Z,1516400490.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:30.271Z,1516400490.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:30.656Z,1516400490.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:30.670Z,1516400490.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:31.053Z,1516400491.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:31.081Z,1516400491.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:31.448Z,1516400491.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:31.475Z,1516400491.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:31.867Z,1516400491.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:31.887Z,1516400491.887 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:31.887Z,1516400491.887 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-01-19T22:21:31.887Z,1516400491.887 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:21:31.889Z,1516400491.889 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:31.889Z,1516400491.889 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-01-19T22:21:31.889Z,1516400491.889 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:21:31.891Z,1516400491.891 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:31.891Z,1516400491.891 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2018-01-19T22:21:31.891Z,1516400491.891 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:21:31.925Z,1516400491.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:21:31.925Z,1516400491.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:21:31.925Z,1516400491.925 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:21:32.262Z,1516400492.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:32.309Z,1516400492.309 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:21:32.309Z,1516400492.309 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-01-19T22:21:32.310Z,1516400492.310 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:21:32.310Z,1516400492.310 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-01-19T22:21:32.310Z,1516400492.310 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:21:32.310Z,1516400492.310 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2018-01-19T22:21:32.665Z,1516400492.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:32.681Z,1516400492.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:21:32.682Z,1516400492.682 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:21:32.682Z,1516400492.682 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:21:32.683Z,1516400492.683 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:21:32.684Z,1516400492.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:21:32.684Z,1516400492.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:21:32.684Z,1516400492.684 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:21:32.685Z,1516400492.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:21:32.685Z,1516400492.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:21:33.044Z,1516400493.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:33.070Z,1516400493.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:21:33.071Z,1516400493.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:33.448Z,1516400493.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:33.482Z,1516400493.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:21:33.483Z,1516400493.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:33.853Z,1516400493.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:33.883Z,1516400493.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:21:33.884Z,1516400493.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:34.245Z,1516400494.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:34.259Z,1516400494.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:21:34.260Z,1516400494.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:34.658Z,1516400494.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:34.683Z,1516400494.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:21:34.684Z,1516400494.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:35.063Z,1516400495.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:35.087Z,1516400495.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:21:35.088Z,1516400495.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:35.459Z,1516400495.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:35.482Z,1516400495.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T22:21:35.483Z,1516400495.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:35.857Z,1516400495.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:35.888Z,1516400495.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T22:21:35.890Z,1516400495.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:36.249Z,1516400496.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:36.284Z,1516400496.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T22:21:36.285Z,1516400496.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:36.658Z,1516400496.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:36.688Z,1516400496.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T22:21:36.689Z,1516400496.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:37.073Z,1516400497.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:37.086Z,1516400497.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T22:21:37.087Z,1516400497.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:37.462Z,1516400497.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:37.491Z,1516400497.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T22:21:37.492Z,1516400497.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:37.849Z,1516400497.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:37.863Z,1516400497.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T22:21:37.864Z,1516400497.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:38.249Z,1516400498.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:38.263Z,1516400498.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T22:21:38.264Z,1516400498.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:38.654Z,1516400498.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:38.668Z,1516400498.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:21:38.669Z,1516400498.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:39.054Z,1516400499.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:39.068Z,1516400499.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:21:39.069Z,1516400499.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:39.466Z,1516400499.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:39.480Z,1516400499.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:21:39.501Z,1516400499.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:39.856Z,1516400499.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:39.870Z,1516400499.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:21:39.871Z,1516400499.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:40.256Z,1516400500.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:40.270Z,1516400500.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:21:40.270Z,1516400500.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:40.658Z,1516400500.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:40.672Z,1516400500.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:21:40.673Z,1516400500.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:41.058Z,1516400501.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:41.078Z,1516400501.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:21:41.079Z,1516400501.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:41.459Z,1516400501.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:41.481Z,1516400501.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T22:21:41.482Z,1516400501.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:41.858Z,1516400501.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:41.872Z,1516400501.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:21:41.873Z,1516400501.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:42.240Z,1516400502.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:42.272Z,1516400502.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:21:42.273Z,1516400502.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:42.659Z,1516400502.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:42.682Z,1516400502.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:21:42.683Z,1516400502.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:43.067Z,1516400503.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:43.086Z,1516400503.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:21:43.087Z,1516400503.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:43.466Z,1516400503.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:43.486Z,1516400503.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:21:43.487Z,1516400503.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:43.848Z,1516400503.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:43.874Z,1516400503.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T22:21:43.875Z,1516400503.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:44.243Z,1516400504.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:44.274Z,1516400504.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T22:21:44.275Z,1516400504.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:44.654Z,1516400504.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:44.677Z,1516400504.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T22:21:44.678Z,1516400504.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:45.062Z,1516400505.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:45.077Z,1516400505.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T22:21:45.078Z,1516400505.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:45.458Z,1516400505.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:45.488Z,1516400505.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T22:21:45.489Z,1516400505.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:45.840Z,1516400505.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:45.871Z,1516400505.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T22:21:45.872Z,1516400505.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:46.247Z,1516400506.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:46.272Z,1516400506.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T22:21:46.273Z,1516400506.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:46.662Z,1516400506.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:46.676Z,1516400506.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:21:46.677Z,1516400506.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:47.062Z,1516400507.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:47.082Z,1516400507.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:21:47.083Z,1516400507.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:47.454Z,1516400507.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:47.475Z,1516400507.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T22:21:47.476Z,1516400507.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:47.844Z,1516400507.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:47.874Z,1516400507.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T22:21:47.875Z,1516400507.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:48.239Z,1516400508.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:48.271Z,1516400508.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T22:21:48.272Z,1516400508.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:48.660Z,1516400508.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:48.679Z,1516400508.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T22:21:48.680Z,1516400508.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:49.066Z,1516400509.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:49.080Z,1516400509.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T22:21:49.081Z,1516400509.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:49.459Z,1516400509.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:49.473Z,1516400509.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T22:21:49.474Z,1516400509.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:49.848Z,1516400509.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:49.873Z,1516400509.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T22:21:49.874Z,1516400509.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:50.243Z,1516400510.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:50.268Z,1516400510.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T22:21:50.270Z,1516400510.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:50.660Z,1516400510.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:50.673Z,1516400510.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T22:21:50.674Z,1516400510.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:51.062Z,1516400511.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:51.076Z,1516400511.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T22:21:51.077Z,1516400511.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:51.458Z,1516400511.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:51.479Z,1516400511.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T22:21:51.480Z,1516400511.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:51.840Z,1516400511.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:51.871Z,1516400511.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T22:21:51.872Z,1516400511.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:52.248Z,1516400512.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:52.274Z,1516400512.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:52.660Z,1516400512.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:52.679Z,1516400512.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:53.071Z,1516400513.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:53.084Z,1516400513.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:53.462Z,1516400513.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:53.476Z,1516400513.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:53.844Z,1516400513.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:53.869Z,1516400513.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:54.239Z,1516400514.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:54.271Z,1516400514.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:54.662Z,1516400514.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:54.676Z,1516400514.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:55.066Z,1516400515.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:55.080Z,1516400515.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:55.460Z,1516400515.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:55.474Z,1516400515.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:55.848Z,1516400515.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:55.873Z,1516400515.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:56.243Z,1516400516.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:56.268Z,1516400516.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:56.659Z,1516400516.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:56.673Z,1516400516.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:57.058Z,1516400517.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:57.075Z,1516400517.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:57.462Z,1516400517.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:57.476Z,1516400517.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:57.840Z,1516400517.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:57.874Z,1516400517.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:58.247Z,1516400518.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:58.272Z,1516400518.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:58.662Z,1516400518.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:58.676Z,1516400518.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:59.062Z,1516400519.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:59.076Z,1516400519.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:59.458Z,1516400519.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:59.472Z,1516400519.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:21:59.844Z,1516400519.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:21:59.875Z,1516400519.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:00.247Z,1516400520.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:00.273Z,1516400520.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:00.650Z,1516400520.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:00.684Z,1516400520.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:01.066Z,1516400521.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:01.080Z,1516400521.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:01.462Z,1516400521.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:01.485Z,1516400521.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:04.552Z,1516400524.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:04.575Z,1516400524.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:04.683Z,1516400524.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:04.729Z,1516400524.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:05.038Z,1516400525.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:05.052Z,1516400525.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:05.450Z,1516400525.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:05.472Z,1516400525.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:05.842Z,1516400525.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:05.856Z,1516400525.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:06.233Z,1516400526.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:06.247Z,1516400526.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:06.632Z,1516400526.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:06.646Z,1516400526.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:07.035Z,1516400527.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:07.049Z,1516400527.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:07.434Z,1516400527.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:07.448Z,1516400527.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:07.846Z,1516400527.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:07.860Z,1516400527.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:08.238Z,1516400528.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:08.255Z,1516400528.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:08.647Z,1516400528.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:08.679Z,1516400528.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:09.034Z,1516400529.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:09.048Z,1516400529.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:09.428Z,1516400529.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:09.454Z,1516400529.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:09.835Z,1516400529.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:09.855Z,1516400529.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:10.233Z,1516400530.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:10.247Z,1516400530.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:10.630Z,1516400530.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:10.648Z,1516400530.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:11.042Z,1516400531.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:11.057Z,1516400531.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:11.443Z,1516400531.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:11.458Z,1516400531.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:11.835Z,1516400531.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:11.866Z,1516400531.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:12.234Z,1516400532.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:12.254Z,1516400532.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:12.619Z,1516400532.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:12.662Z,1516400532.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:13.037Z,1516400533.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:13.051Z,1516400533.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:13.423Z,1516400533.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:13.455Z,1516400533.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:13.848Z,1516400533.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:13.862Z,1516400533.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:14.249Z,1516400534.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:14.263Z,1516400534.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:14.646Z,1516400534.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:14.667Z,1516400534.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:15.036Z,1516400535.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:15.050Z,1516400535.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:15.421Z,1516400535.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:15.452Z,1516400535.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:15.827Z,1516400535.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:15.853Z,1516400535.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:16.220Z,1516400536.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:16.252Z,1516400536.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:16.617Z,1516400536.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:16.650Z,1516400536.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:17.046Z,1516400537.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:17.067Z,1516400537.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:17.446Z,1516400537.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:17.460Z,1516400537.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:17.838Z,1516400537.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:17.859Z,1516400537.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:18.224Z,1516400538.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:18.255Z,1516400538.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:18.628Z,1516400538.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:18.655Z,1516400538.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:19.039Z,1516400539.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:19.053Z,1516400539.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:19.423Z,1516400539.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:19.455Z,1516400539.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:19.844Z,1516400539.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:19.858Z,1516400539.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:20.242Z,1516400540.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:20.256Z,1516400540.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:20.643Z,1516400540.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:20.657Z,1516400540.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:21.019Z,1516400541.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:21.052Z,1516400541.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:21.417Z,1516400541.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:21.439Z,1516400541.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:21.823Z,1516400541.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:21.856Z,1516400541.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:22.220Z,1516400542.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:22.244Z,1516400542.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:22.623Z,1516400542.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:22.643Z,1516400542.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:23.042Z,1516400543.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:23.066Z,1516400543.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:23.442Z,1516400543.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:23.466Z,1516400543.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:23.838Z,1516400543.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:23.868Z,1516400543.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:24.231Z,1516400544.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:24.251Z,1516400544.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:24.632Z,1516400544.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:24.646Z,1516400544.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:25.033Z,1516400545.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:25.047Z,1516400545.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:25.429Z,1516400545.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:25.447Z,1516400545.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:25.846Z,1516400545.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:25.860Z,1516400545.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:26.244Z,1516400546.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:26.263Z,1516400546.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:26.645Z,1516400546.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:26.667Z,1516400546.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:27.036Z,1516400547.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:27.049Z,1516400547.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:27.429Z,1516400547.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:27.451Z,1516400547.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:27.835Z,1516400547.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:27.855Z,1516400547.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:28.220Z,1516400548.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:28.246Z,1516400548.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:28.621Z,1516400548.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:28.651Z,1516400548.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:29.046Z,1516400549.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:29.060Z,1516400549.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:29.442Z,1516400549.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:29.456Z,1516400549.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:29.842Z,1516400549.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:29.856Z,1516400549.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:30.223Z,1516400550.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:30.248Z,1516400550.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:30.618Z,1516400550.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:30.666Z,1516400550.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:31.022Z,1516400551.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:31.048Z,1516400551.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:31.423Z,1516400551.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:31.448Z,1516400551.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:31.834Z,1516400551.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:31.857Z,1516400551.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:32.251Z,1516400552.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:32.265Z,1516400552.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:32.642Z,1516400552.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:32.656Z,1516400552.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:33.019Z,1516400553.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:33.051Z,1516400553.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:33.417Z,1516400553.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:33.450Z,1516400553.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:33.823Z,1516400553.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:33.848Z,1516400553.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:34.220Z,1516400554.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:34.255Z,1516400554.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:34.621Z,1516400554.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:34.643Z,1516400554.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:35.046Z,1516400555.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:35.060Z,1516400555.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:35.443Z,1516400555.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:35.457Z,1516400555.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:35.830Z,1516400555.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:35.862Z,1516400555.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:36.227Z,1516400556.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:36.252Z,1516400556.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:36.618Z,1516400556.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:36.655Z,1516400556.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:37.028Z,1516400557.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:37.053Z,1516400557.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:37.423Z,1516400557.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:37.454Z,1516400557.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:37.830Z,1516400557.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:37.864Z,1516400557.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:38.251Z,1516400558.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:38.266Z,1516400558.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:38.652Z,1516400558.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:38.666Z,1516400558.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:39.029Z,1516400559.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:39.061Z,1516400559.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:39.423Z,1516400559.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:39.449Z,1516400559.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:39.829Z,1516400559.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:39.848Z,1516400559.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:40.229Z,1516400560.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:40.243Z,1516400560.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:40.622Z,1516400560.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:40.642Z,1516400560.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:41.046Z,1516400561.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:41.075Z,1516400561.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:41.433Z,1516400561.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:41.447Z,1516400561.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:41.833Z,1516400561.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:41.847Z,1516400561.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:42.233Z,1516400562.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:42.247Z,1516400562.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:42.633Z,1516400562.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:42.646Z,1516400562.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:43.032Z,1516400563.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:43.046Z,1516400563.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:43.433Z,1516400563.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:43.447Z,1516400563.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:43.846Z,1516400563.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:43.860Z,1516400563.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:44.234Z,1516400564.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:44.255Z,1516400564.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:44.646Z,1516400564.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:44.660Z,1516400564.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:45.033Z,1516400565.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:45.047Z,1516400565.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:45.433Z,1516400565.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:45.447Z,1516400565.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:45.829Z,1516400565.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:45.859Z,1516400565.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:46.233Z,1516400566.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:46.248Z,1516400566.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:46.622Z,1516400566.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:46.643Z,1516400566.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:47.046Z,1516400567.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:47.081Z,1516400567.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:47.442Z,1516400567.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:47.456Z,1516400567.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:47.835Z,1516400567.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:47.858Z,1516400567.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:48.235Z,1516400568.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:48.249Z,1516400568.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:48.633Z,1516400568.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:48.647Z,1516400568.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:49.028Z,1516400569.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:49.047Z,1516400569.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:49.436Z,1516400569.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:49.455Z,1516400569.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:49.842Z,1516400569.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:49.856Z,1516400569.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:50.243Z,1516400570.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:50.263Z,1516400570.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:50.641Z,1516400570.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:50.655Z,1516400570.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:51.036Z,1516400571.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:51.050Z,1516400571.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:51.417Z,1516400571.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:51.443Z,1516400571.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:51.823Z,1516400571.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:51.855Z,1516400571.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:52.220Z,1516400572.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:52.258Z,1516400572.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:52.617Z,1516400572.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:52.648Z,1516400572.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:53.046Z,1516400573.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:53.067Z,1516400573.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:53.450Z,1516400573.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:53.465Z,1516400573.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:53.834Z,1516400573.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:53.855Z,1516400573.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:54.223Z,1516400574.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:54.248Z,1516400574.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:54.619Z,1516400574.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:54.651Z,1516400574.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:55.028Z,1516400575.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:55.053Z,1516400575.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:55.423Z,1516400575.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:55.448Z,1516400575.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:55.834Z,1516400575.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:55.857Z,1516400575.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:56.250Z,1516400576.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:56.271Z,1516400576.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:56.646Z,1516400576.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:56.660Z,1516400576.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:57.020Z,1516400577.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:57.051Z,1516400577.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:57.422Z,1516400577.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:57.447Z,1516400577.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:57.824Z,1516400577.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:57.849Z,1516400577.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:58.221Z,1516400578.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:58.258Z,1516400578.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:58.617Z,1516400578.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:58.640Z,1516400578.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:59.047Z,1516400579.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:59.067Z,1516400579.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:59.452Z,1516400579.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:59.466Z,1516400579.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:22:59.842Z,1516400579.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:22:59.861Z,1516400579.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:00.223Z,1516400580.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:00.259Z,1516400580.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:00.627Z,1516400580.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:00.661Z,1516400580.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:01.022Z,1516400581.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:01.036Z,1516400581.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:01.423Z,1516400581.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:01.459Z,1516400581.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:01.839Z,1516400581.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:01.867Z,1516400581.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:04.935Z,1516400584.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:04.963Z,1516400584.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:05.079Z,1516400585.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:05.115Z,1516400585.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:05.417Z,1516400585.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:05.431Z,1516400585.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:05.825Z,1516400585.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:05.838Z,1516400585.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:06.223Z,1516400586.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:06.238Z,1516400586.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:06.622Z,1516400586.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:06.636Z,1516400586.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:07.026Z,1516400587.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:07.040Z,1516400587.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:07.430Z,1516400587.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:07.444Z,1516400587.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:07.826Z,1516400587.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:07.840Z,1516400587.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:08.223Z,1516400588.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:08.237Z,1516400588.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:08.617Z,1516400588.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:08.631Z,1516400588.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:09.018Z,1516400589.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:09.036Z,1516400589.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:09.423Z,1516400589.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:09.437Z,1516400589.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:09.823Z,1516400589.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:09.843Z,1516400589.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:10.230Z,1516400590.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:10.244Z,1516400590.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:10.626Z,1516400590.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:10.646Z,1516400590.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:11.009Z,1516400591.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:11.030Z,1516400591.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:11.415Z,1516400591.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:11.446Z,1516400591.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:11.816Z,1516400591.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:11.835Z,1516400591.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:12.223Z,1516400592.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:12.238Z,1516400592.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:12.622Z,1516400592.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:12.636Z,1516400592.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:13.026Z,1516400593.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:13.040Z,1516400593.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:13.424Z,1516400593.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:13.443Z,1516400593.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:13.826Z,1516400593.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:13.840Z,1516400593.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:14.224Z,1516400594.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:14.237Z,1516400594.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:14.608Z,1516400594.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:14.638Z,1516400594.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:15.020Z,1516400595.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:15.035Z,1516400595.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:15.424Z,1516400595.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:15.438Z,1516400595.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:15.823Z,1516400595.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:15.843Z,1516400595.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:16.230Z,1516400596.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:16.244Z,1516400596.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:16.626Z,1516400596.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:16.646Z,1516400596.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:17.009Z,1516400597.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:17.030Z,1516400597.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:17.419Z,1516400597.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:17.433Z,1516400597.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:17.825Z,1516400597.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:17.838Z,1516400597.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:18.214Z,1516400598.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:18.233Z,1516400598.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:18.619Z,1516400598.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:18.633Z,1516400598.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:19.025Z,1516400599.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:19.046Z,1516400599.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:19.426Z,1516400599.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:19.440Z,1516400599.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:19.825Z,1516400599.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:19.839Z,1516400599.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:20.221Z,1516400600.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:20.234Z,1516400600.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:20.610Z,1516400600.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:20.631Z,1516400600.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:21.015Z,1516400601.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:21.038Z,1516400601.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:21.424Z,1516400601.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:21.438Z,1516400601.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:21.826Z,1516400601.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:21.841Z,1516400601.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:22.229Z,1516400602.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:22.251Z,1516400602.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:22.630Z,1516400602.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:22.644Z,1516400602.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:23.017Z,1516400603.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:23.032Z,1516400603.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:23.414Z,1516400603.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:23.441Z,1516400603.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:23.824Z,1516400603.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:23.838Z,1516400603.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:24.222Z,1516400604.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:24.236Z,1516400604.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:24.614Z,1516400604.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:24.647Z,1516400604.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:25.035Z,1516400605.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:25.050Z,1516400605.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:25.425Z,1516400605.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:25.451Z,1516400605.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:25.834Z,1516400605.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:25.849Z,1516400605.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:26.208Z,1516400606.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:26.244Z,1516400606.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:26.614Z,1516400606.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:26.653Z,1516400606.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:27.026Z,1516400607.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:27.060Z,1516400607.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:27.419Z,1516400607.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:27.453Z,1516400607.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:27.825Z,1516400607.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:27.867Z,1516400607.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:28.262Z,1516400608.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:28.280Z,1516400608.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:28.656Z,1516400608.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:28.678Z,1516400608.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:29.018Z,1516400609.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:29.033Z,1516400609.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:29.418Z,1516400609.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:29.432Z,1516400609.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:29.819Z,1516400609.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:29.832Z,1516400609.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:30.237Z,1516400610.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:30.277Z,1516400610.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:30.629Z,1516400610.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:30.679Z,1516400610.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:31.034Z,1516400611.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:31.077Z,1516400611.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:31.428Z,1516400611.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:31.478Z,1516400611.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:31.848Z,1516400611.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:31.880Z,1516400611.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:32.221Z,1516400612.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:32.276Z,1516400612.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:32.614Z,1516400612.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:32.638Z,1516400612.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:33.026Z,1516400613.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:33.047Z,1516400613.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:33.412Z,1516400613.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:33.439Z,1516400613.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:33.832Z,1516400613.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:33.859Z,1516400613.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:34.228Z,1516400614.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:34.263Z,1516400614.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:34.627Z,1516400614.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:34.670Z,1516400614.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:35.014Z,1516400615.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:35.059Z,1516400615.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:35.414Z,1516400615.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:35.461Z,1516400615.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:35.825Z,1516400615.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:35.878Z,1516400615.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:36.230Z,1516400616.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:36.270Z,1516400616.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:36.628Z,1516400616.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:36.673Z,1516400616.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:37.021Z,1516400617.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:37.038Z,1516400617.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:37.417Z,1516400617.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:37.432Z,1516400617.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:37.835Z,1516400617.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:37.863Z,1516400617.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:38.221Z,1516400618.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:38.235Z,1516400618.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:38.622Z,1516400618.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:38.637Z,1516400618.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:39.018Z,1516400619.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:39.032Z,1516400619.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:39.420Z,1516400619.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:39.434Z,1516400619.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:39.820Z,1516400619.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:39.839Z,1516400619.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:40.234Z,1516400620.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:40.266Z,1516400620.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:40.622Z,1516400620.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:40.642Z,1516400620.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:41.018Z,1516400621.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:41.032Z,1516400621.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:41.420Z,1516400621.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:41.435Z,1516400621.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:41.822Z,1516400621.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:41.836Z,1516400621.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:42.236Z,1516400622.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:42.266Z,1516400622.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:42.634Z,1516400622.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:42.648Z,1516400622.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:43.025Z,1516400623.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:43.038Z,1516400623.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:43.411Z,1516400623.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:43.431Z,1516400623.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:43.826Z,1516400623.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:43.840Z,1516400623.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:44.222Z,1516400624.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:44.236Z,1516400624.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:44.618Z,1516400624.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:44.632Z,1516400624.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:45.013Z,1516400625.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:45.035Z,1516400625.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:45.413Z,1516400625.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:45.427Z,1516400625.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:45.818Z,1516400625.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:45.832Z,1516400625.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:46.230Z,1516400626.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:46.244Z,1516400626.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:46.626Z,1516400626.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:46.646Z,1516400626.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:47.012Z,1516400627.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:47.043Z,1516400627.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:47.431Z,1516400627.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:47.451Z,1516400627.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:47.835Z,1516400627.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:47.849Z,1516400627.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:48.235Z,1516400628.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:48.255Z,1516400628.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:48.630Z,1516400628.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:48.644Z,1516400628.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:49.012Z,1516400629.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:49.046Z,1516400629.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:49.415Z,1516400629.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:49.440Z,1516400629.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:49.829Z,1516400629.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:49.843Z,1516400629.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:50.234Z,1516400630.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:50.249Z,1516400630.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:50.626Z,1516400630.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:50.640Z,1516400630.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:51.012Z,1516400631.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:51.042Z,1516400631.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:51.415Z,1516400631.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:51.447Z,1516400631.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:51.830Z,1516400631.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:51.846Z,1516400631.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:52.233Z,1516400632.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:52.280Z,1516400632.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:52.626Z,1516400632.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:52.659Z,1516400632.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:53.010Z,1516400633.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:53.024Z,1516400633.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:53.419Z,1516400633.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:53.453Z,1516400633.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:53.826Z,1516400633.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:53.853Z,1516400633.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:54.226Z,1516400634.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:54.252Z,1516400634.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:54.630Z,1516400634.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:54.655Z,1516400634.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:55.020Z,1516400635.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:55.051Z,1516400635.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:55.419Z,1516400635.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:55.455Z,1516400635.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:55.830Z,1516400635.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:55.860Z,1516400635.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:56.230Z,1516400636.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:56.244Z,1516400636.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:56.634Z,1516400636.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:56.648Z,1516400636.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:57.023Z,1516400637.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:57.043Z,1516400637.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:57.424Z,1516400637.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:57.439Z,1516400637.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:57.825Z,1516400637.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:57.840Z,1516400637.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:58.230Z,1516400638.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:58.244Z,1516400638.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:58.626Z,1516400638.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:58.641Z,1516400638.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:59.020Z,1516400639.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:59.035Z,1516400639.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:59.424Z,1516400639.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:59.438Z,1516400639.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:23:59.821Z,1516400639.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:23:59.835Z,1516400639.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:00.226Z,1516400640.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:00.241Z,1516400640.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:00.630Z,1516400640.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:00.644Z,1516400640.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:01.027Z,1516400641.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:01.041Z,1516400641.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:01.410Z,1516400641.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:01.435Z,1516400641.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:01.824Z,1516400641.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:01.839Z,1516400641.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:02.226Z,1516400642.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:02.246Z,1516400642.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:05.314Z,1516400645.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:05.330Z,1516400645.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:05.439Z,1516400645.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:05.469Z,1516400645.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:05.812Z,1516400645.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:05.827Z,1516400645.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:06.198Z,1516400646.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:06.220Z,1516400646.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:06.581Z,1516400646.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:06.595Z,1516400646.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:06.987Z,1516400646.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:07.002Z,1516400647.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:07.384Z,1516400647.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:07.398Z,1516400647.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:07.781Z,1516400647.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:07.795Z,1516400647.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:08.202Z,1516400648.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:08.225Z,1516400648.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:08.606Z,1516400648.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:08.630Z,1516400648.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:08.998Z,1516400648.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:09.028Z,1516400649.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:09.385Z,1516400649.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:09.399Z,1516400649.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:09.786Z,1516400649.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:09.800Z,1516400649.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:10.186Z,1516400650.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:10.200Z,1516400650.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:10.590Z,1516400650.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:10.604Z,1516400650.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:11.001Z,1516400651.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:11.034Z,1516400651.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:11.391Z,1516400651.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:11.411Z,1516400651.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:11.803Z,1516400651.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:11.830Z,1516400651.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:12.188Z,1516400652.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:12.203Z,1516400652.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:12.583Z,1516400652.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:12.599Z,1516400652.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:12.985Z,1516400652.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:13.012Z,1516400653.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:13.393Z,1516400653.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:13.408Z,1516400653.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:13.785Z,1516400653.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:13.799Z,1516400653.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:14.197Z,1516400654.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:14.212Z,1516400654.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:14.598Z,1516400654.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:14.611Z,1516400654.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:14.998Z,1516400654.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:15.012Z,1516400655.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:15.391Z,1516400655.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:15.406Z,1516400655.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:15.789Z,1516400655.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:15.810Z,1516400655.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:16.192Z,1516400656.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:16.211Z,1516400656.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:16.592Z,1516400656.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:16.611Z,1516400656.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:16.998Z,1516400656.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:17.012Z,1516400657.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:17.398Z,1516400657.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:17.412Z,1516400657.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:17.795Z,1516400657.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:17.817Z,1516400657.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:18.194Z,1516400658.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:18.208Z,1516400658.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:18.578Z,1516400658.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:18.603Z,1516400658.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:18.995Z,1516400658.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:19.010Z,1516400659.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:19.380Z,1516400659.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:19.411Z,1516400659.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:19.778Z,1516400659.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:19.809Z,1516400659.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:20.202Z,1516400660.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:20.216Z,1516400660.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:20.607Z,1516400660.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:20.626Z,1516400660.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:20.990Z,1516400660.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:21.011Z,1516400661.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:21.381Z,1516400661.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:21.415Z,1516400661.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:21.781Z,1516400661.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:21.808Z,1516400661.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:22.184Z,1516400662.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:22.210Z,1516400662.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:22.579Z,1516400662.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:22.604Z,1516400662.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:23.010Z,1516400663.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:23.024Z,1516400663.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:23.398Z,1516400663.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:23.412Z,1516400663.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:23.805Z,1516400663.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:23.819Z,1516400663.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:24.184Z,1516400664.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:24.215Z,1516400664.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:24.575Z,1516400664.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:24.606Z,1516400664.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:24.982Z,1516400664.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:25.014Z,1516400665.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:25.383Z,1516400665.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:25.415Z,1516400665.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:25.777Z,1516400665.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:25.810Z,1516400665.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:26.200Z,1516400666.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:26.215Z,1516400666.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:26.603Z,1516400666.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:26.617Z,1516400666.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:26.993Z,1516400666.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:27.015Z,1516400667.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:27.383Z,1516400667.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:27.408Z,1516400667.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:27.782Z,1516400667.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:27.819Z,1516400667.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:28.187Z,1516400668.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:28.221Z,1516400668.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:28.583Z,1516400668.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:28.597Z,1516400668.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:28.999Z,1516400668.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:29.025Z,1516400669.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:29.402Z,1516400669.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:29.431Z,1516400669.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:29.802Z,1516400669.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:29.831Z,1516400669.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:30.188Z,1516400670.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:30.202Z,1516400670.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:30.583Z,1516400670.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:30.603Z,1516400670.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:30.987Z,1516400670.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:31.002Z,1516400671.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:31.390Z,1516400671.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:31.408Z,1516400671.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:31.791Z,1516400671.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:31.811Z,1516400671.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:32.202Z,1516400672.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:32.216Z,1516400672.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:32.601Z,1516400672.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:32.615Z,1516400672.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:32.997Z,1516400672.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:33.012Z,1516400673.012 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:33.012Z,1516400673.012 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-01-19T22:24:33.012Z,1516400673.012 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:24:33.014Z,1516400673.014 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:33.014Z,1516400673.014 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-01-19T22:24:33.014Z,1516400673.014 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:24:33.016Z,1516400673.016 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:33.016Z,1516400673.016 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2018-01-19T22:24:33.016Z,1516400673.016 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:24:33.048Z,1516400673.048 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:24:33.048Z,1516400673.048 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:24:33.048Z,1516400673.048 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:24:33.384Z,1516400673.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:33.429Z,1516400673.429 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:24:33.429Z,1516400673.429 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-01-19T22:24:33.429Z,1516400673.429 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:24:33.430Z,1516400673.430 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-01-19T22:24:33.430Z,1516400673.430 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:24:33.430Z,1516400673.430 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2018-01-19T22:24:33.790Z,1516400673.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:33.803Z,1516400673.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:24:33.804Z,1516400673.804 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:24:33.804Z,1516400673.804 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:24:33.804Z,1516400673.804 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:24:33.805Z,1516400673.805 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:24:33.805Z,1516400673.805 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:24:33.806Z,1516400673.806 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:24:33.806Z,1516400673.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:24:33.806Z,1516400673.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:24:34.180Z,1516400674.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:34.211Z,1516400674.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:24:34.212Z,1516400674.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:34.586Z,1516400674.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:34.611Z,1516400674.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:24:34.612Z,1516400674.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:35.001Z,1516400675.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:35.015Z,1516400675.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:24:35.016Z,1516400675.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:35.406Z,1516400675.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:35.420Z,1516400675.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:24:35.421Z,1516400675.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:35.809Z,1516400675.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:35.823Z,1516400675.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:24:35.824Z,1516400675.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:36.182Z,1516400676.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:36.218Z,1516400676.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:24:36.219Z,1516400676.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:36.586Z,1516400676.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:36.611Z,1516400676.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T22:24:36.612Z,1516400676.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:36.982Z,1516400676.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:37.008Z,1516400677.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T22:24:37.013Z,1516400677.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:37.382Z,1516400677.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:37.426Z,1516400677.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T22:24:37.427Z,1516400677.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:37.786Z,1516400677.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:37.794Z,1516400677.794 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2018-01-19T22:24:37.825Z,1516400677.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T22:24:37.826Z,1516400677.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:38.210Z,1516400678.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:38.223Z,1516400678.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T22:24:38.224Z,1516400678.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:38.610Z,1516400678.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:38.630Z,1516400678.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T22:24:38.631Z,1516400678.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:39.007Z,1516400679.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:39.021Z,1516400679.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T22:24:39.022Z,1516400679.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:39.388Z,1516400679.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:39.416Z,1516400679.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T22:24:39.421Z,1516400679.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:39.790Z,1516400679.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:39.821Z,1516400679.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:24:39.822Z,1516400679.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:40.190Z,1516400680.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:40.204Z,1516400680.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:24:40.206Z,1516400680.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:40.584Z,1516400680.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:40.626Z,1516400680.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:24:40.627Z,1516400680.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:41.001Z,1516400681.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:41.008Z,1516400681.008 [PNI_TCM](ERROR): CRC does not match. Expected:0x39591 got:0x451
2018-01-19T22:24:41.033Z,1516400681.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:24:41.034Z,1516400681.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:41.392Z,1516400681.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:41.407Z,1516400681.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:24:41.408Z,1516400681.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:41.791Z,1516400681.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:41.806Z,1516400681.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:24:41.807Z,1516400681.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:42.189Z,1516400682.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:42.231Z,1516400682.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:24:42.232Z,1516400682.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:42.582Z,1516400682.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:42.609Z,1516400682.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T22:24:42.610Z,1516400682.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:42.988Z,1516400682.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:43.010Z,1516400683.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:24:43.011Z,1516400683.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:43.396Z,1516400683.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:43.410Z,1516400683.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:24:43.411Z,1516400683.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:43.778Z,1516400683.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:43.818Z,1516400683.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:24:43.819Z,1516400683.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:44.196Z,1516400684.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:44.211Z,1516400684.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:24:44.212Z,1516400684.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:44.602Z,1516400684.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:44.615Z,1516400684.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:24:44.616Z,1516400684.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:45.000Z,1516400685.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:45.018Z,1516400685.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T22:24:45.019Z,1516400685.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:45.390Z,1516400685.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:45.422Z,1516400685.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T22:24:45.423Z,1516400685.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:45.794Z,1516400685.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:45.810Z,1516400685.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T22:24:45.811Z,1516400685.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:46.193Z,1516400686.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:46.210Z,1516400686.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T22:24:46.211Z,1516400686.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:46.596Z,1516400686.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:46.610Z,1516400686.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T22:24:46.611Z,1516400686.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:46.996Z,1516400686.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:47.022Z,1516400687.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T22:24:47.023Z,1516400687.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:47.399Z,1516400687.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:47.419Z,1516400687.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T22:24:47.420Z,1516400687.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:47.800Z,1516400687.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:47.826Z,1516400687.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:24:47.827Z,1516400687.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:48.196Z,1516400688.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:48.209Z,1516400688.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:24:48.210Z,1516400688.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:48.583Z,1516400688.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:48.626Z,1516400688.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T22:24:48.627Z,1516400688.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:48.983Z,1516400688.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:49.012Z,1516400689.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T22:24:49.014Z,1516400689.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:49.376Z,1516400689.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:49.412Z,1516400689.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T22:24:49.413Z,1516400689.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:49.796Z,1516400689.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:49.810Z,1516400689.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T22:24:49.811Z,1516400689.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:50.198Z,1516400690.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:50.230Z,1516400690.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T22:24:50.231Z,1516400690.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:50.609Z,1516400690.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:50.624Z,1516400690.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T22:24:50.625Z,1516400690.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:51.005Z,1516400691.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:51.020Z,1516400691.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T22:24:51.021Z,1516400691.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:51.379Z,1516400691.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:51.416Z,1516400691.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T22:24:51.417Z,1516400691.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:51.775Z,1516400691.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:51.806Z,1516400691.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T22:24:51.807Z,1516400691.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:52.184Z,1516400692.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:52.213Z,1516400692.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T22:24:52.214Z,1516400692.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:52.579Z,1516400692.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:52.611Z,1516400692.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T22:24:52.612Z,1516400692.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:52.988Z,1516400692.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:53.024Z,1516400693.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:53.406Z,1516400693.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:53.451Z,1516400693.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:53.802Z,1516400693.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:53.820Z,1516400693.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:54.175Z,1516400694.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:54.215Z,1516400694.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:54.583Z,1516400694.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:54.619Z,1516400694.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:54.979Z,1516400694.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:55.011Z,1516400695.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:55.384Z,1516400695.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:55.414Z,1516400695.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:55.783Z,1516400695.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:55.819Z,1516400695.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:56.202Z,1516400696.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:56.216Z,1516400696.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:56.599Z,1516400696.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:56.627Z,1516400696.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:57.002Z,1516400697.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:57.020Z,1516400697.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:57.379Z,1516400697.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:57.416Z,1516400697.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:57.783Z,1516400697.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:57.818Z,1516400697.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:58.207Z,1516400698.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:58.222Z,1516400698.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:58.579Z,1516400698.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:58.616Z,1516400698.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:59.005Z,1516400699.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:59.021Z,1516400699.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:59.410Z,1516400699.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:59.424Z,1516400699.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:24:59.790Z,1516400699.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:24:59.834Z,1516400699.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:00.183Z,1516400700.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:00.217Z,1516400700.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:00.583Z,1516400700.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:00.618Z,1516400700.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:00.979Z,1516400700.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:01.018Z,1516400701.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:01.021Z,1516400701.021 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T22:25:01.021Z,1516400701.021 [Default:CheckIn:C.Wait] Stopped
2018-01-19T22:25:01.021Z,1516400701.021 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T22:25:01.021Z,1516400701.021 [Default:CheckIn:D] Running Loop=1
2018-01-19T22:25:01.376Z,1516400701.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:01.418Z,1516400701.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:01.421Z,1516400701.421 [Default:CheckIn:D] Stopped
2018-01-19T22:25:01.422Z,1516400701.422 [Default:CheckIn:E] Running Loop=1
2018-01-19T22:25:01.783Z,1516400701.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:01.814Z,1516400701.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:01.818Z,1516400701.818 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.223267 min 
2018-01-19T22:25:01.819Z,1516400701.819 [Default:CheckIn:E] Stopped
2018-01-19T22:25:01.819Z,1516400701.819 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T22:25:01.819Z,1516400701.819 [Default:CheckIn] Stopped
2018-01-19T22:25:01.819Z,1516400701.819 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T22:25:01.820Z,1516400701.820 [Default:CheckIn](INFO): Running loop #8
2018-01-19T22:25:01.820Z,1516400701.820 [Default:CheckIn] Running Loop=8
2018-01-19T22:25:01.820Z,1516400701.820 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T22:25:01.820Z,1516400701.820 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T22:25:02.190Z,1516400702.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:02.226Z,1516400702.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:02.611Z,1516400702.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:02.625Z,1516400702.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:05.686Z,1516400705.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:05.715Z,1516400705.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:05.838Z,1516400705.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:05.865Z,1516400705.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:06.175Z,1516400706.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:06.212Z,1516400706.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:06.577Z,1516400706.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:06.591Z,1516400706.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:06.977Z,1516400706.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:06.991Z,1516400706.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:07.378Z,1516400707.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:07.392Z,1516400707.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:07.779Z,1516400707.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:07.795Z,1516400707.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:08.175Z,1516400708.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:08.195Z,1516400708.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:08.571Z,1516400708.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:08.586Z,1516400708.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:08.982Z,1516400708.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:08.997Z,1516400708.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:09.382Z,1516400709.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:09.396Z,1516400709.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:09.778Z,1516400709.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:09.793Z,1516400709.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:10.171Z,1516400710.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:10.197Z,1516400710.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:10.559Z,1516400710.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:10.584Z,1516400710.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:10.982Z,1516400710.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:10.997Z,1516400710.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:11.387Z,1516400711.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:11.401Z,1516400711.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:11.779Z,1516400711.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:11.793Z,1516400711.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:12.164Z,1516400712.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:12.195Z,1516400712.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:12.563Z,1516400712.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:12.599Z,1516400712.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:13.006Z,1516400713.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:13.037Z,1516400713.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:13.386Z,1516400713.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:13.407Z,1516400713.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:13.791Z,1516400713.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:13.806Z,1516400713.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:14.165Z,1516400714.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:14.200Z,1516400714.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:14.572Z,1516400714.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:14.599Z,1516400714.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:14.971Z,1516400714.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:15.006Z,1516400715.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:15.392Z,1516400715.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:15.407Z,1516400715.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:15.798Z,1516400715.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:15.812Z,1516400715.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:16.170Z,1516400716.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:16.199Z,1516400716.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:16.568Z,1516400716.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:16.583Z,1516400716.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:16.979Z,1516400716.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:17.010Z,1516400717.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:17.387Z,1516400717.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:17.413Z,1516400717.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:17.783Z,1516400717.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:17.807Z,1516400717.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:18.170Z,1516400718.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:18.185Z,1516400718.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:18.568Z,1516400718.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:18.582Z,1516400718.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:18.982Z,1516400718.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:19.006Z,1516400719.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:19.386Z,1516400719.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:19.416Z,1516400719.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:19.770Z,1516400719.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:19.791Z,1516400719.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:20.166Z,1516400720.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:20.193Z,1516400720.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:20.576Z,1516400720.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:20.590Z,1516400720.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:20.978Z,1516400720.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:20.992Z,1516400720.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:21.382Z,1516400721.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:21.396Z,1516400721.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:21.777Z,1516400721.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:21.795Z,1516400721.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:22.174Z,1516400722.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:22.188Z,1516400722.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:22.607Z,1516400722.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:22.622Z,1516400722.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:22.982Z,1516400722.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:22.996Z,1516400722.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:23.383Z,1516400723.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:23.397Z,1516400723.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:23.778Z,1516400723.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:23.805Z,1516400723.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:24.178Z,1516400724.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:24.192Z,1516400724.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:24.559Z,1516400724.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:24.603Z,1516400724.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:24.979Z,1516400724.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:24.995Z,1516400724.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:25.386Z,1516400725.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:25.407Z,1516400725.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:25.786Z,1516400725.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:25.801Z,1516400725.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:26.176Z,1516400726.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:26.192Z,1516400726.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:26.566Z,1516400726.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:26.588Z,1516400726.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:26.979Z,1516400726.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:26.994Z,1516400726.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:27.385Z,1516400727.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:27.401Z,1516400727.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:27.782Z,1516400727.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:27.796Z,1516400727.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:28.173Z,1516400728.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:28.187Z,1516400728.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:28.559Z,1516400728.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:28.591Z,1516400728.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:28.986Z,1516400728.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:29.003Z,1516400729.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:29.386Z,1516400729.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:29.400Z,1516400729.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:29.786Z,1516400729.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:29.807Z,1516400729.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:30.176Z,1516400730.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:30.191Z,1516400730.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:30.559Z,1516400730.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:30.587Z,1516400730.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:30.986Z,1516400730.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:31.007Z,1516400731.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:31.388Z,1516400731.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:31.411Z,1516400731.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:31.787Z,1516400731.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:31.801Z,1516400731.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:32.164Z,1516400732.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:32.190Z,1516400732.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:32.563Z,1516400732.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:32.588Z,1516400732.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:32.980Z,1516400732.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:32.994Z,1516400732.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:33.380Z,1516400733.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:33.398Z,1516400733.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:33.786Z,1516400733.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:33.807Z,1516400733.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:34.168Z,1516400734.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:34.194Z,1516400734.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:34.567Z,1516400734.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:34.593Z,1516400734.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:34.982Z,1516400734.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:34.997Z,1516400734.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:35.391Z,1516400735.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:35.405Z,1516400735.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:35.787Z,1516400735.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:35.807Z,1516400735.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:36.168Z,1516400736.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:36.194Z,1516400736.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:36.559Z,1516400736.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:36.592Z,1516400736.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:36.982Z,1516400736.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:36.997Z,1516400736.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:37.386Z,1516400737.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:37.401Z,1516400737.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:37.778Z,1516400737.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:37.792Z,1516400737.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:38.182Z,1516400738.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:38.196Z,1516400738.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:38.570Z,1516400738.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:38.584Z,1516400738.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:38.979Z,1516400738.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:38.993Z,1516400738.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:39.382Z,1516400739.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:39.396Z,1516400739.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:39.782Z,1516400739.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:39.796Z,1516400739.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:40.177Z,1516400740.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:40.191Z,1516400740.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:40.575Z,1516400740.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:40.595Z,1516400740.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:40.950Z,1516400740.950 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T22:25:40.950Z,1516400740.950 [NAL9602] Data Fault, FailCount= 2
2018-01-19T22:25:40.950Z,1516400740.950 [NAL9602](ERROR): Data Fault
2018-01-19T22:25:40.983Z,1516400740.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:41.002Z,1516400741.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:41.031Z,1516400741.031 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T22:25:41.342Z,1516400741.342 [NAL9602](INFO): Powering down
2018-01-19T22:25:41.376Z,1516400741.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:41.390Z,1516400741.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:41.775Z,1516400741.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:41.790Z,1516400741.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:42.169Z,1516400742.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:42.183Z,1516400742.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:42.223Z,1516400742.223 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T22:25:42.223Z,1516400742.223 [NAL9602] No Fault, FailCount= 2
2018-01-19T22:25:42.564Z,1516400742.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:42.578Z,1516400742.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:42.971Z,1516400742.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:42.985Z,1516400742.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:43.371Z,1516400743.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:43.385Z,1516400743.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:43.764Z,1516400743.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:43.778Z,1516400743.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:44.171Z,1516400744.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:44.185Z,1516400744.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:44.568Z,1516400744.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:44.587Z,1516400744.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:44.967Z,1516400744.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:44.981Z,1516400744.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:45.370Z,1516400745.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:45.391Z,1516400745.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:45.771Z,1516400745.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:45.791Z,1516400745.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:46.172Z,1516400746.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:46.186Z,1516400746.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:46.568Z,1516400746.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:46.583Z,1516400746.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:46.972Z,1516400746.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:46.991Z,1516400746.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:47.372Z,1516400747.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:47.386Z,1516400747.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:47.768Z,1516400747.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:47.787Z,1516400747.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:48.168Z,1516400748.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:48.187Z,1516400748.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:48.568Z,1516400748.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:48.582Z,1516400748.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:48.972Z,1516400748.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:48.991Z,1516400748.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:49.373Z,1516400749.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:49.387Z,1516400749.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:49.772Z,1516400749.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:49.786Z,1516400749.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:50.173Z,1516400750.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:50.187Z,1516400750.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:50.573Z,1516400750.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:50.587Z,1516400750.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:50.970Z,1516400750.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:50.984Z,1516400750.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:51.369Z,1516400751.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:51.383Z,1516400751.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:51.773Z,1516400751.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:51.795Z,1516400751.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:52.174Z,1516400752.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:52.188Z,1516400752.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:52.573Z,1516400752.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:52.587Z,1516400752.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:52.975Z,1516400752.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:52.989Z,1516400752.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:53.371Z,1516400753.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:53.386Z,1516400753.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:53.768Z,1516400753.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:53.790Z,1516400753.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:54.174Z,1516400754.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:54.188Z,1516400754.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:54.570Z,1516400754.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:54.584Z,1516400754.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:54.963Z,1516400754.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:54.990Z,1516400754.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:55.376Z,1516400755.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:55.395Z,1516400755.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:55.775Z,1516400755.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:55.790Z,1516400755.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:56.175Z,1516400756.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:56.190Z,1516400756.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:56.575Z,1516400756.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:56.590Z,1516400756.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:56.974Z,1516400756.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:56.990Z,1516400756.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:57.374Z,1516400757.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:57.390Z,1516400757.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:57.769Z,1516400757.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:57.792Z,1516400757.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:58.167Z,1516400758.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:58.181Z,1516400758.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:58.569Z,1516400758.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:58.583Z,1516400758.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:58.965Z,1516400758.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:58.996Z,1516400758.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:59.375Z,1516400759.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:59.389Z,1516400759.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:25:59.769Z,1516400759.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:25:59.783Z,1516400759.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:00.165Z,1516400760.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:00.197Z,1516400760.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:00.572Z,1516400760.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:00.586Z,1516400760.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:00.957Z,1516400760.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:00.992Z,1516400760.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:01.377Z,1516400761.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:01.391Z,1516400761.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:01.768Z,1516400761.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:01.782Z,1516400761.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:02.163Z,1516400762.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:02.185Z,1516400762.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:02.567Z,1516400762.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:02.589Z,1516400762.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:02.977Z,1516400762.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:02.991Z,1516400762.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:06.074Z,1516400766.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:06.088Z,1516400766.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:06.183Z,1516400766.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:06.226Z,1516400766.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:06.535Z,1516400766.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:06.549Z,1516400766.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:06.936Z,1516400766.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:06.950Z,1516400766.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:07.343Z,1516400767.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:07.374Z,1516400767.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:07.743Z,1516400767.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:07.757Z,1516400767.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:08.143Z,1516400768.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:08.157Z,1516400768.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:08.536Z,1516400768.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:08.550Z,1516400768.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:08.940Z,1516400768.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:08.954Z,1516400768.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:09.343Z,1516400769.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:09.357Z,1516400769.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:09.743Z,1516400769.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:09.758Z,1516400769.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:10.140Z,1516400770.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:10.154Z,1516400770.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:10.536Z,1516400770.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:10.550Z,1516400770.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:10.943Z,1516400770.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:10.958Z,1516400770.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:11.340Z,1516400771.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:11.354Z,1516400771.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:11.719Z,1516400771.719 [NAL9602](INFO): Powering up NAL9602
2018-01-19T22:26:11.737Z,1516400771.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:11.751Z,1516400771.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:12.147Z,1516400772.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:12.161Z,1516400772.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:12.540Z,1516400772.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:12.554Z,1516400772.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:12.940Z,1516400772.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:12.954Z,1516400772.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:13.345Z,1516400773.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:13.359Z,1516400773.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:13.742Z,1516400773.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:13.755Z,1516400773.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:14.139Z,1516400774.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:14.155Z,1516400774.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:14.545Z,1516400774.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:14.559Z,1516400774.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:14.940Z,1516400774.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:14.954Z,1516400774.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:15.340Z,1516400775.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:15.354Z,1516400775.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:15.741Z,1516400775.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:15.755Z,1516400775.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:16.145Z,1516400776.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:16.159Z,1516400776.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:16.536Z,1516400776.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:16.550Z,1516400776.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:16.945Z,1516400776.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:16.959Z,1516400776.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:17.344Z,1516400777.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:17.358Z,1516400777.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:17.739Z,1516400777.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:17.753Z,1516400777.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:18.147Z,1516400778.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:18.162Z,1516400778.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:18.543Z,1516400778.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:18.558Z,1516400778.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:18.939Z,1516400778.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:18.953Z,1516400778.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:19.345Z,1516400779.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:19.367Z,1516400779.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:19.745Z,1516400779.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:19.759Z,1516400779.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:20.143Z,1516400780.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:20.157Z,1516400780.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:20.545Z,1516400780.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:20.559Z,1516400780.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:20.944Z,1516400780.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:20.963Z,1516400780.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:21.341Z,1516400781.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:21.355Z,1516400781.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:21.745Z,1516400781.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:21.759Z,1516400781.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:22.158Z,1516400782.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:22.172Z,1516400782.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:22.516Z,1516400782.516 [NAL9602](INFO): NAL9602 initialized
2018-01-19T22:26:22.544Z,1516400782.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:22.581Z,1516400782.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:22.945Z,1516400782.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:22.959Z,1516400782.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:23.358Z,1516400783.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:23.372Z,1516400783.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:23.754Z,1516400783.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:23.768Z,1516400783.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:24.153Z,1516400784.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:24.167Z,1516400784.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:24.549Z,1516400784.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:24.563Z,1516400784.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:24.948Z,1516400784.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:24.962Z,1516400784.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:25.349Z,1516400785.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:25.364Z,1516400785.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:25.745Z,1516400785.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:25.759Z,1516400785.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:26.150Z,1516400786.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:26.164Z,1516400786.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:26.554Z,1516400786.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:26.568Z,1516400786.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:26.954Z,1516400786.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:26.968Z,1516400786.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:27.351Z,1516400787.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:27.365Z,1516400787.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:27.749Z,1516400787.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:27.764Z,1516400787.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:28.155Z,1516400788.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:28.175Z,1516400788.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:28.555Z,1516400788.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:28.575Z,1516400788.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:28.965Z,1516400788.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:28.980Z,1516400788.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:29.348Z,1516400789.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:29.363Z,1516400789.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:29.754Z,1516400789.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:29.768Z,1516400789.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:30.155Z,1516400790.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:30.169Z,1516400790.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:30.559Z,1516400790.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:30.573Z,1516400790.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:30.947Z,1516400790.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:30.977Z,1516400790.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:31.350Z,1516400791.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:31.364Z,1516400791.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:31.745Z,1516400791.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:31.775Z,1516400791.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:32.162Z,1516400792.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:32.176Z,1516400792.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:32.550Z,1516400792.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:32.581Z,1516400792.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:32.961Z,1516400792.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:32.975Z,1516400792.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:33.337Z,1516400793.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:33.374Z,1516400793.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:33.731Z,1516400793.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:33.769Z,1516400793.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:34.150Z,1516400794.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:34.175Z,1516400794.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:34.550Z,1516400794.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:34.587Z,1516400794.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:34.962Z,1516400794.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:34.977Z,1516400794.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:35.337Z,1516400795.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:35.368Z,1516400795.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:35.736Z,1516400795.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:35.750Z,1516400795.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:36.150Z,1516400796.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:36.176Z,1516400796.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:36.568Z,1516400796.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:36.583Z,1516400796.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:36.954Z,1516400796.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:36.984Z,1516400796.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:37.345Z,1516400797.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:37.379Z,1516400797.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:37.744Z,1516400797.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:37.759Z,1516400797.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:38.154Z,1516400798.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:38.186Z,1516400798.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:38.554Z,1516400798.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:38.585Z,1516400798.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:38.959Z,1516400798.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:38.988Z,1516400798.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:39.338Z,1516400799.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:39.361Z,1516400799.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:39.747Z,1516400799.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:39.763Z,1516400799.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:40.145Z,1516400800.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:40.160Z,1516400800.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:40.550Z,1516400800.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:40.566Z,1516400800.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:40.956Z,1516400800.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:40.972Z,1516400800.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:41.358Z,1516400801.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:41.373Z,1516400801.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:41.732Z,1516400801.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:41.758Z,1516400801.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:42.132Z,1516400802.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:42.163Z,1516400802.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:42.550Z,1516400802.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:42.571Z,1516400802.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:42.948Z,1516400802.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:42.967Z,1516400802.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:43.357Z,1516400803.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:43.372Z,1516400803.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:43.758Z,1516400803.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:43.779Z,1516400803.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:44.158Z,1516400804.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:44.172Z,1516400804.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:44.547Z,1516400804.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:44.561Z,1516400804.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:44.945Z,1516400804.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:44.959Z,1516400804.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:45.340Z,1516400805.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:45.363Z,1516400805.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:45.732Z,1516400805.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:45.762Z,1516400805.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:46.139Z,1516400806.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:46.163Z,1516400806.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:46.551Z,1516400806.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:46.580Z,1516400806.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:46.957Z,1516400806.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:46.971Z,1516400806.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:47.358Z,1516400807.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:47.379Z,1516400807.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:47.748Z,1516400807.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:47.767Z,1516400807.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:48.147Z,1516400808.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:48.162Z,1516400808.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:48.546Z,1516400808.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:48.560Z,1516400808.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:48.932Z,1516400808.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:48.958Z,1516400808.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:49.351Z,1516400809.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:49.365Z,1516400809.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:49.758Z,1516400809.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:49.772Z,1516400809.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:50.158Z,1516400810.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:50.172Z,1516400810.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:50.548Z,1516400810.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:50.562Z,1516400810.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:50.943Z,1516400810.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:50.972Z,1516400810.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:51.332Z,1516400811.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:51.363Z,1516400811.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:51.748Z,1516400811.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:51.763Z,1516400811.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:52.136Z,1516400812.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:52.171Z,1516400812.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:52.558Z,1516400812.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:52.572Z,1516400812.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:52.958Z,1516400812.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:52.972Z,1516400812.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:53.359Z,1516400813.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:53.373Z,1516400813.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:53.748Z,1516400813.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:53.767Z,1516400813.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:54.147Z,1516400814.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:54.162Z,1516400814.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:54.545Z,1516400814.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:54.571Z,1516400814.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:54.948Z,1516400814.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:54.963Z,1516400814.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:55.355Z,1516400815.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:55.369Z,1516400815.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:55.759Z,1516400815.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:55.779Z,1516400815.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:56.158Z,1516400816.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:56.172Z,1516400816.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:56.547Z,1516400816.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:56.562Z,1516400816.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:56.936Z,1516400816.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:56.971Z,1516400816.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:57.348Z,1516400817.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:57.363Z,1516400817.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:57.732Z,1516400817.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:57.763Z,1516400817.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:58.136Z,1516400818.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:58.167Z,1516400818.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:58.543Z,1516400818.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:58.579Z,1516400818.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:58.959Z,1516400818.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:58.973Z,1516400818.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:59.346Z,1516400819.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:59.383Z,1516400819.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:26:59.740Z,1516400819.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:26:59.771Z,1516400819.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:00.132Z,1516400820.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:00.146Z,1516400820.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:00.541Z,1516400820.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:00.571Z,1516400820.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:00.940Z,1516400820.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:00.975Z,1516400820.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:01.350Z,1516400821.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:01.380Z,1516400821.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:01.758Z,1516400821.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:01.783Z,1516400821.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:02.146Z,1516400822.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:02.160Z,1516400822.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:02.544Z,1516400822.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:02.559Z,1516400822.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:02.941Z,1516400822.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:02.975Z,1516400822.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:03.345Z,1516400823.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:03.360Z,1516400823.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:06.431Z,1516400826.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:06.446Z,1516400826.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:06.550Z,1516400826.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:06.590Z,1516400826.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:06.914Z,1516400826.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:06.928Z,1516400826.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:07.311Z,1516400827.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:07.325Z,1516400827.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:07.706Z,1516400827.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:07.720Z,1516400827.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:08.103Z,1516400828.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:08.118Z,1516400828.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:08.504Z,1516400828.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:08.519Z,1516400828.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:08.896Z,1516400828.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:08.915Z,1516400828.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:09.306Z,1516400829.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:09.322Z,1516400829.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:09.711Z,1516400829.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:09.731Z,1516400829.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:10.111Z,1516400830.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:10.126Z,1516400830.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:10.502Z,1516400830.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:10.522Z,1516400830.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:10.904Z,1516400830.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:10.918Z,1516400830.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:11.304Z,1516400831.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:11.323Z,1516400831.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:11.701Z,1516400831.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:11.718Z,1516400831.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:12.105Z,1516400832.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:12.119Z,1516400832.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:12.511Z,1516400832.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:12.525Z,1516400832.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:12.917Z,1516400832.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:12.931Z,1516400832.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:13.315Z,1516400833.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:13.329Z,1516400833.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:13.685Z,1516400833.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:13.724Z,1516400833.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:14.105Z,1516400834.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:14.119Z,1516400834.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:14.488Z,1516400834.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:14.523Z,1516400834.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:14.885Z,1516400834.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:14.908Z,1516400834.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:15.311Z,1516400835.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:15.325Z,1516400835.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:15.710Z,1516400835.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:15.731Z,1516400835.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:16.110Z,1516400836.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:16.125Z,1516400836.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:16.491Z,1516400836.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:16.516Z,1516400836.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:16.887Z,1516400836.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:16.919Z,1516400836.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:17.291Z,1516400837.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:17.322Z,1516400837.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:17.692Z,1516400837.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:17.717Z,1516400837.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:18.087Z,1516400838.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:18.126Z,1516400838.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:18.506Z,1516400838.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:18.527Z,1516400838.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:18.914Z,1516400838.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:18.928Z,1516400838.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:19.315Z,1516400839.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:19.328Z,1516400839.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:19.685Z,1516400839.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:19.699Z,1516400839.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:20.095Z,1516400840.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:20.126Z,1516400840.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:20.488Z,1516400840.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:20.531Z,1516400840.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:20.885Z,1516400840.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:20.899Z,1516400840.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:21.302Z,1516400841.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:21.327Z,1516400841.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:21.706Z,1516400841.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:21.733Z,1516400841.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:22.106Z,1516400842.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:22.132Z,1516400842.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:22.491Z,1516400842.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:22.527Z,1516400842.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:22.896Z,1516400842.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:22.910Z,1516400842.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:23.292Z,1516400843.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:23.306Z,1516400843.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:23.700Z,1516400843.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:23.714Z,1516400843.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:24.092Z,1516400844.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:24.106Z,1516400844.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:24.506Z,1516400844.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:24.537Z,1516400844.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:24.914Z,1516400844.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:24.945Z,1516400844.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:25.306Z,1516400845.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:25.320Z,1516400845.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:25.695Z,1516400845.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:25.713Z,1516400845.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:26.097Z,1516400846.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:26.115Z,1516400846.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:26.501Z,1516400846.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:26.515Z,1516400846.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:26.889Z,1516400846.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:26.916Z,1516400846.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:27.314Z,1516400847.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:27.328Z,1516400847.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:27.710Z,1516400847.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:27.724Z,1516400847.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:28.102Z,1516400848.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:28.122Z,1516400848.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:28.503Z,1516400848.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:28.517Z,1516400848.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:28.898Z,1516400848.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:28.923Z,1516400848.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:29.303Z,1516400849.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:29.323Z,1516400849.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:29.704Z,1516400849.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:29.718Z,1516400849.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:30.104Z,1516400850.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:30.117Z,1516400850.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:30.510Z,1516400850.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:30.524Z,1516400850.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:30.910Z,1516400850.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:30.924Z,1516400850.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:31.309Z,1516400851.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:31.323Z,1516400851.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:31.697Z,1516400851.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:31.711Z,1516400851.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:32.102Z,1516400852.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:32.116Z,1516400852.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:32.496Z,1516400852.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:32.519Z,1516400852.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:32.896Z,1516400852.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:32.915Z,1516400852.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:33.309Z,1516400853.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:33.323Z,1516400853.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:33.710Z,1516400853.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:33.724Z,1516400853.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:34.107Z,1516400854.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:34.138Z,1516400854.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:34.138Z,1516400854.138 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-01-19T22:27:34.138Z,1516400854.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:27:34.139Z,1516400854.139 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:34.140Z,1516400854.140 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-01-19T22:27:34.140Z,1516400854.140 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:27:34.141Z,1516400854.141 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:34.142Z,1516400854.142 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2018-01-19T22:27:34.142Z,1516400854.142 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:27:34.153Z,1516400854.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:27:34.153Z,1516400854.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:27:34.154Z,1516400854.154 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:27:34.511Z,1516400854.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:34.562Z,1516400854.562 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:27:34.562Z,1516400854.562 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-01-19T22:27:34.562Z,1516400854.562 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:27:34.562Z,1516400854.562 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-01-19T22:27:34.563Z,1516400854.563 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:27:34.563Z,1516400854.563 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2018-01-19T22:27:34.904Z,1516400854.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:34.916Z,1516400854.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:27:34.917Z,1516400854.917 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:27:34.917Z,1516400854.917 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:27:34.918Z,1516400854.918 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:27:34.918Z,1516400854.918 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:27:34.918Z,1516400854.918 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:27:34.919Z,1516400854.919 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:27:34.919Z,1516400854.919 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:27:34.919Z,1516400854.919 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:27:35.302Z,1516400855.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:35.320Z,1516400855.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:27:35.321Z,1516400855.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:35.708Z,1516400855.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:35.722Z,1516400855.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:27:35.723Z,1516400855.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:36.091Z,1516400856.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:36.123Z,1516400856.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:27:36.124Z,1516400856.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:36.505Z,1516400856.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:36.536Z,1516400856.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:27:36.537Z,1516400856.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:36.914Z,1516400856.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:36.935Z,1516400856.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:27:36.936Z,1516400856.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:37.315Z,1516400857.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:37.328Z,1516400857.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:27:37.330Z,1516400857.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:37.689Z,1516400857.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:37.711Z,1516400857.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T22:27:37.712Z,1516400857.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:38.091Z,1516400858.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:38.116Z,1516400858.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T22:27:38.117Z,1516400858.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:38.491Z,1516400858.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:38.523Z,1516400858.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T22:27:38.524Z,1516400858.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:38.889Z,1516400858.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:38.922Z,1516400858.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T22:27:38.923Z,1516400858.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:39.308Z,1516400859.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:39.327Z,1516400859.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T22:27:39.328Z,1516400859.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:39.711Z,1516400859.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:39.724Z,1516400859.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T22:27:39.725Z,1516400859.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:40.111Z,1516400860.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:40.137Z,1516400860.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T22:27:40.138Z,1516400860.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:40.495Z,1516400860.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:40.526Z,1516400860.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T22:27:40.527Z,1516400860.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:40.891Z,1516400860.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:40.927Z,1516400860.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:27:40.928Z,1516400860.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:41.295Z,1516400861.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:41.327Z,1516400861.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:27:41.328Z,1516400861.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:41.695Z,1516400861.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:41.730Z,1516400861.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:27:41.731Z,1516400861.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:42.096Z,1516400862.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:42.109Z,1516400862.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:27:42.110Z,1516400862.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:42.506Z,1516400862.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:42.539Z,1516400862.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:27:42.540Z,1516400862.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:42.914Z,1516400862.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:42.942Z,1516400862.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:27:42.943Z,1516400862.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:43.314Z,1516400863.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:43.346Z,1516400863.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:27:43.347Z,1516400863.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:43.696Z,1516400863.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:43.710Z,1516400863.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T22:27:43.711Z,1516400863.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:44.098Z,1516400864.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:44.111Z,1516400864.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:27:44.112Z,1516400864.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:44.503Z,1516400864.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:44.516Z,1516400864.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:27:44.517Z,1516400864.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:44.894Z,1516400864.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:44.922Z,1516400864.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:27:44.923Z,1516400864.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:45.315Z,1516400865.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:45.338Z,1516400865.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:27:45.339Z,1516400865.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:45.711Z,1516400865.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:45.725Z,1516400865.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:27:45.726Z,1516400865.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:46.107Z,1516400866.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:46.122Z,1516400866.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T22:27:46.123Z,1516400866.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:46.508Z,1516400866.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:46.527Z,1516400866.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T22:27:46.528Z,1516400866.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:46.906Z,1516400866.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:46.920Z,1516400866.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T22:27:46.921Z,1516400866.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:47.310Z,1516400867.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:47.332Z,1516400867.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T22:27:47.349Z,1516400867.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:47.709Z,1516400867.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:47.723Z,1516400867.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T22:27:47.724Z,1516400867.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:48.113Z,1516400868.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:48.135Z,1516400868.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T22:27:48.136Z,1516400868.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:48.497Z,1516400868.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:48.511Z,1516400868.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T22:27:48.512Z,1516400868.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:48.897Z,1516400868.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:48.918Z,1516400868.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:27:48.918Z,1516400868.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:49.305Z,1516400869.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:49.319Z,1516400869.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:27:49.319Z,1516400869.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:49.709Z,1516400869.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:49.723Z,1516400869.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T22:27:49.724Z,1516400869.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:50.102Z,1516400870.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:50.122Z,1516400870.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T22:27:50.123Z,1516400870.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:50.511Z,1516400870.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:50.531Z,1516400870.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T22:27:50.531Z,1516400870.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:50.910Z,1516400870.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:50.924Z,1516400870.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T22:27:50.925Z,1516400870.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:51.313Z,1516400871.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:51.327Z,1516400871.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T22:27:51.328Z,1516400871.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:51.699Z,1516400871.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:51.713Z,1516400871.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T22:27:51.714Z,1516400871.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:52.101Z,1516400872.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:52.116Z,1516400872.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T22:27:52.117Z,1516400872.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:52.507Z,1516400872.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:52.522Z,1516400872.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T22:27:52.523Z,1516400872.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:52.907Z,1516400872.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:52.922Z,1516400872.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T22:27:52.922Z,1516400872.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:53.302Z,1516400873.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:53.330Z,1516400873.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T22:27:53.331Z,1516400873.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:53.712Z,1516400873.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:53.732Z,1516400873.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T22:27:53.733Z,1516400873.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:54.114Z,1516400874.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:54.135Z,1516400874.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T22:27:54.136Z,1516400874.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:54.502Z,1516400874.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:54.517Z,1516400874.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:54.902Z,1516400874.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:54.916Z,1516400874.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:55.307Z,1516400875.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:55.321Z,1516400875.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:55.709Z,1516400875.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:55.724Z,1516400875.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:56.116Z,1516400876.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:56.135Z,1516400876.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:56.508Z,1516400876.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:56.522Z,1516400876.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:56.898Z,1516400876.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:56.913Z,1516400876.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:57.310Z,1516400877.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:57.335Z,1516400877.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:57.720Z,1516400877.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:57.735Z,1516400877.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:58.109Z,1516400878.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:58.123Z,1516400878.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:58.498Z,1516400878.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:58.520Z,1516400878.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:58.890Z,1516400878.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:58.924Z,1516400878.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:59.315Z,1516400879.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:59.330Z,1516400879.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:27:59.719Z,1516400879.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:27:59.735Z,1516400879.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:00.109Z,1516400880.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:00.123Z,1516400880.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:00.490Z,1516400880.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:00.520Z,1516400880.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:00.895Z,1516400880.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:00.931Z,1516400880.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:01.303Z,1516400881.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:01.335Z,1516400881.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:01.704Z,1516400881.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:01.735Z,1516400881.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:02.118Z,1516400882.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:02.133Z,1516400882.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:02.492Z,1516400882.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:02.531Z,1516400882.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:02.889Z,1516400882.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:02.915Z,1516400882.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:03.304Z,1516400883.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:03.330Z,1516400883.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:03.706Z,1516400883.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:03.735Z,1516400883.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:06.798Z,1516400886.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:06.828Z,1516400886.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:06.918Z,1516400886.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:06.933Z,1516400886.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:07.280Z,1516400887.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:07.318Z,1516400887.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:07.677Z,1516400887.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:07.690Z,1516400887.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:08.079Z,1516400888.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:08.113Z,1516400888.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:08.492Z,1516400888.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:08.507Z,1516400888.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:08.894Z,1516400888.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:08.971Z,1516400888.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:09.294Z,1516400889.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:09.322Z,1516400889.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:09.680Z,1516400889.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:09.702Z,1516400889.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:10.084Z,1516400890.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:10.102Z,1516400890.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:10.472Z,1516400890.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:10.499Z,1516400890.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:10.885Z,1516400890.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:10.899Z,1516400890.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:11.279Z,1516400891.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:11.299Z,1516400891.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:11.682Z,1516400891.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:11.701Z,1516400891.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:12.094Z,1516400892.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:12.108Z,1516400892.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:12.486Z,1516400892.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:12.506Z,1516400892.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:12.872Z,1516400892.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:12.898Z,1516400892.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:13.293Z,1516400893.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:13.310Z,1516400893.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:13.689Z,1516400893.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:13.715Z,1516400893.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:14.081Z,1516400894.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:14.095Z,1516400894.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:14.493Z,1516400894.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:14.511Z,1516400894.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:14.893Z,1516400894.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:14.911Z,1516400894.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:15.294Z,1516400895.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:15.308Z,1516400895.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:15.683Z,1516400895.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:15.698Z,1516400895.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:16.081Z,1516400896.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:16.095Z,1516400896.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:16.478Z,1516400896.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:16.499Z,1516400896.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:16.888Z,1516400896.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:16.903Z,1516400896.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:17.281Z,1516400897.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:17.298Z,1516400897.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:17.695Z,1516400897.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:17.710Z,1516400897.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:18.093Z,1516400898.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:18.111Z,1516400898.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:18.494Z,1516400898.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:18.514Z,1516400898.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:18.878Z,1516400898.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:18.897Z,1516400898.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:19.294Z,1516400899.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:19.308Z,1516400899.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:19.690Z,1516400899.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:19.706Z,1516400899.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:20.088Z,1516400900.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:20.110Z,1516400900.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:20.494Z,1516400900.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:20.515Z,1516400900.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:20.898Z,1516400900.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:20.912Z,1516400900.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:21.298Z,1516400901.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:21.317Z,1516400901.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:21.692Z,1516400901.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:21.711Z,1516400901.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:22.072Z,1516400902.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:22.103Z,1516400902.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:22.469Z,1516400902.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:22.504Z,1516400902.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:22.889Z,1516400902.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:22.903Z,1516400902.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:23.271Z,1516400903.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:23.304Z,1516400903.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:23.698Z,1516400903.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:23.714Z,1516400903.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:24.101Z,1516400904.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:24.115Z,1516400904.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:24.499Z,1516400904.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:24.517Z,1516400904.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:24.869Z,1516400904.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:24.903Z,1516400904.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:25.275Z,1516400905.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:25.311Z,1516400905.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:25.680Z,1516400905.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:25.712Z,1516400905.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:26.074Z,1516400906.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:26.088Z,1516400906.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:26.490Z,1516400906.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:26.652Z,1516400906.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:26.890Z,1516400906.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:26.927Z,1516400906.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:27.286Z,1516400907.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:27.311Z,1516400907.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:27.676Z,1516400907.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:27.711Z,1516400907.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:28.080Z,1516400908.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:28.094Z,1516400908.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:28.473Z,1516400908.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:28.488Z,1516400908.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:28.885Z,1516400908.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:28.899Z,1516400908.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:29.283Z,1516400909.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:29.298Z,1516400909.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:29.686Z,1516400909.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:29.707Z,1516400909.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:30.097Z,1516400910.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:30.112Z,1516400910.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:30.490Z,1516400910.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:30.510Z,1516400910.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:30.872Z,1516400910.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:30.903Z,1516400910.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:31.287Z,1516400911.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:31.307Z,1516400911.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:31.688Z,1516400911.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:31.701Z,1516400911.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:32.080Z,1516400912.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:32.098Z,1516400912.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:32.506Z,1516400912.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:32.540Z,1516400912.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:32.894Z,1516400912.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:32.908Z,1516400912.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:33.289Z,1516400913.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:33.303Z,1516400913.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:33.683Z,1516400913.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:33.703Z,1516400913.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:34.081Z,1516400914.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:34.095Z,1516400914.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:34.474Z,1516400914.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:34.496Z,1516400914.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:34.879Z,1516400914.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:34.900Z,1516400914.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:35.280Z,1516400915.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:35.294Z,1516400915.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:35.689Z,1516400915.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:35.704Z,1516400915.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:36.092Z,1516400916.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:36.111Z,1516400916.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:36.493Z,1516400916.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:36.507Z,1516400916.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:36.881Z,1516400916.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:36.895Z,1516400916.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:37.278Z,1516400917.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:37.300Z,1516400917.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:37.680Z,1516400917.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:37.698Z,1516400917.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:38.087Z,1516400918.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:38.107Z,1516400918.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:38.492Z,1516400918.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:38.511Z,1516400918.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:38.893Z,1516400918.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:38.914Z,1516400918.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:39.293Z,1516400919.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:39.307Z,1516400919.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:39.687Z,1516400919.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:39.707Z,1516400919.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:40.084Z,1516400920.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:40.098Z,1516400920.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:40.481Z,1516400920.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:40.499Z,1516400920.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:40.888Z,1516400920.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:40.902Z,1516400920.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:41.278Z,1516400921.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:41.303Z,1516400921.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:41.704Z,1516400921.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:41.739Z,1516400921.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:42.149Z,1516400922.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:42.164Z,1516400922.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:42.496Z,1516400922.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:42.527Z,1516400922.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:42.877Z,1516400922.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:42.919Z,1516400922.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:43.277Z,1516400923.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:43.311Z,1516400923.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:43.713Z,1516400923.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:43.776Z,1516400923.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:44.077Z,1516400924.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:44.115Z,1516400924.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:44.486Z,1516400924.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:44.536Z,1516400924.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:44.916Z,1516400924.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:44.964Z,1516400924.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:45.288Z,1516400925.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:45.322Z,1516400925.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:45.677Z,1516400925.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:45.695Z,1516400925.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:46.085Z,1516400926.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:46.104Z,1516400926.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:46.484Z,1516400926.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:46.535Z,1516400926.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:46.885Z,1516400926.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:46.899Z,1516400926.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:47.287Z,1516400927.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:47.314Z,1516400927.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:47.697Z,1516400927.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:47.719Z,1516400927.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:48.099Z,1516400928.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:48.158Z,1516400928.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:48.512Z,1516400928.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:48.560Z,1516400928.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:48.887Z,1516400928.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:48.914Z,1516400928.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:49.302Z,1516400929.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:49.341Z,1516400929.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:49.687Z,1516400929.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:49.719Z,1516400929.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:50.077Z,1516400930.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:50.091Z,1516400930.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:50.496Z,1516400930.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:50.551Z,1516400930.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:50.900Z,1516400930.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:50.934Z,1516400930.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:51.291Z,1516400931.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:51.311Z,1516400931.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:51.682Z,1516400931.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:51.711Z,1516400931.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:52.097Z,1516400932.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:52.119Z,1516400932.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:52.471Z,1516400932.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:52.506Z,1516400932.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:52.880Z,1516400932.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:52.905Z,1516400932.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:53.275Z,1516400933.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:53.314Z,1516400933.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:53.682Z,1516400933.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:53.719Z,1516400933.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:54.090Z,1516400934.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:54.120Z,1516400934.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:54.505Z,1516400934.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:54.527Z,1516400934.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:54.878Z,1516400934.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:54.902Z,1516400934.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:55.288Z,1516400935.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:55.302Z,1516400935.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:55.682Z,1516400935.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:55.703Z,1516400935.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:56.071Z,1516400936.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:56.103Z,1516400936.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:56.494Z,1516400936.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:56.508Z,1516400936.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:56.898Z,1516400936.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:56.919Z,1516400936.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:57.298Z,1516400937.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:57.312Z,1516400937.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:57.685Z,1516400937.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:57.700Z,1516400937.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:58.072Z,1516400938.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:58.108Z,1516400938.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:58.488Z,1516400938.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:58.503Z,1516400938.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:58.882Z,1516400938.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:58.904Z,1516400938.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:59.271Z,1516400939.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:59.303Z,1516400939.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:28:59.700Z,1516400939.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:28:59.714Z,1516400939.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:00.104Z,1516400940.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:00.123Z,1516400940.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:00.499Z,1516400940.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:00.514Z,1516400940.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:00.872Z,1516400940.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:00.908Z,1516400940.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:01.276Z,1516400941.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:01.307Z,1516400941.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:01.680Z,1516400941.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:01.708Z,1516400941.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:02.071Z,1516400942.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:02.107Z,1516400942.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:02.506Z,1516400942.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:02.522Z,1516400942.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:02.903Z,1516400942.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:02.918Z,1516400942.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:03.282Z,1516400943.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:03.315Z,1516400943.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:03.675Z,1516400943.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:03.711Z,1516400943.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:04.072Z,1516400944.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:04.115Z,1516400944.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:07.180Z,1516400947.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:07.207Z,1516400947.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:07.315Z,1516400947.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:07.358Z,1516400947.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:07.675Z,1516400947.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:07.705Z,1516400947.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:08.078Z,1516400948.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:08.091Z,1516400948.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:08.464Z,1516400948.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:08.484Z,1516400948.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:08.864Z,1516400948.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:08.883Z,1516400948.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:09.264Z,1516400949.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:09.278Z,1516400949.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:09.658Z,1516400949.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:09.676Z,1516400949.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:10.061Z,1516400950.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:10.083Z,1516400950.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:10.473Z,1516400950.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:10.487Z,1516400950.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:10.870Z,1516400950.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:10.884Z,1516400950.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:10.897Z,1516400950.897 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T22:29:11.273Z,1516400951.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:11.287Z,1516400951.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:11.661Z,1516400951.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:11.682Z,1516400951.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:12.067Z,1516400952.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:12.087Z,1516400952.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:12.463Z,1516400952.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:12.477Z,1516400952.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:12.860Z,1516400952.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:12.878Z,1516400952.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:13.261Z,1516400953.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:13.275Z,1516400953.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:13.668Z,1516400953.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:13.691Z,1516400953.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:14.077Z,1516400954.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:14.090Z,1516400954.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:14.477Z,1516400954.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:14.499Z,1516400954.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:14.867Z,1516400954.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:14.887Z,1516400954.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:15.262Z,1516400955.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:15.287Z,1516400955.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:15.668Z,1516400955.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:15.683Z,1516400955.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:16.062Z,1516400956.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:16.081Z,1516400956.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:16.474Z,1516400956.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:16.488Z,1516400956.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:16.874Z,1516400956.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:16.888Z,1516400956.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:17.270Z,1516400957.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:17.292Z,1516400957.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:17.668Z,1516400957.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:17.686Z,1516400957.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:18.068Z,1516400958.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:18.087Z,1516400958.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:18.455Z,1516400958.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:18.486Z,1516400958.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:18.867Z,1516400958.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:18.881Z,1516400958.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:19.251Z,1516400959.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:19.282Z,1516400959.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:19.674Z,1516400959.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:19.688Z,1516400959.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:20.078Z,1516400960.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:20.092Z,1516400960.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:20.477Z,1516400960.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:20.491Z,1516400960.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:20.855Z,1516400960.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:20.886Z,1516400960.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:21.256Z,1516400961.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:21.292Z,1516400961.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:21.668Z,1516400961.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:21.683Z,1516400961.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:22.055Z,1516400962.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:22.086Z,1516400962.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:22.475Z,1516400962.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:22.489Z,1516400962.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:22.870Z,1516400962.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:22.890Z,1516400962.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:23.274Z,1516400963.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:23.288Z,1516400963.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:23.656Z,1516400963.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:23.692Z,1516400963.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:24.080Z,1516400964.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:24.104Z,1516400964.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:24.468Z,1516400964.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:24.487Z,1516400964.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:24.865Z,1516400964.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:24.891Z,1516400964.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:25.255Z,1516400965.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:25.275Z,1516400965.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:25.674Z,1516400965.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:25.697Z,1516400965.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:26.074Z,1516400966.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:26.097Z,1516400966.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:26.466Z,1516400966.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:26.500Z,1516400966.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:26.859Z,1516400966.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:26.879Z,1516400966.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:27.260Z,1516400967.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:27.283Z,1516400967.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:27.661Z,1516400967.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:27.676Z,1516400967.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:28.064Z,1516400968.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:28.083Z,1516400968.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:28.478Z,1516400968.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:28.513Z,1516400968.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:28.878Z,1516400968.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:28.892Z,1516400968.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:29.270Z,1516400969.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:29.284Z,1516400969.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:29.664Z,1516400969.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:29.679Z,1516400969.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:30.054Z,1516400970.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:30.081Z,1516400970.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:30.467Z,1516400970.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:30.487Z,1516400970.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:30.870Z,1516400970.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:30.884Z,1516400970.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:31.261Z,1516400971.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:31.283Z,1516400971.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:31.674Z,1516400971.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:31.688Z,1516400971.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:32.074Z,1516400972.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:32.088Z,1516400972.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:32.473Z,1516400972.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:32.487Z,1516400972.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:32.868Z,1516400972.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:32.882Z,1516400972.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:33.264Z,1516400973.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:33.282Z,1516400973.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:33.656Z,1516400973.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:33.678Z,1516400973.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:34.072Z,1516400974.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:34.086Z,1516400974.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:34.474Z,1516400974.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:34.489Z,1516400974.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:34.874Z,1516400974.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:34.888Z,1516400974.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:35.274Z,1516400975.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:35.288Z,1516400975.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:35.662Z,1516400975.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:35.676Z,1516400975.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:36.061Z,1516400976.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:36.076Z,1516400976.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:36.471Z,1516400976.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:36.494Z,1516400976.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:36.879Z,1516400976.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:36.893Z,1516400976.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:37.278Z,1516400977.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:37.293Z,1516400977.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:37.663Z,1516400977.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:37.678Z,1516400977.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:38.052Z,1516400978.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:38.087Z,1516400978.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:38.478Z,1516400978.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:38.493Z,1516400978.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:38.877Z,1516400978.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:38.891Z,1516400978.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:39.270Z,1516400979.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:39.285Z,1516400979.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:39.652Z,1516400979.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:39.678Z,1516400979.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:40.058Z,1516400980.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:40.087Z,1516400980.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:40.479Z,1516400980.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:40.493Z,1516400980.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:40.874Z,1516400980.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:40.888Z,1516400980.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:41.270Z,1516400981.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:41.299Z,1516400981.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:41.660Z,1516400981.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:41.687Z,1516400981.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:42.059Z,1516400982.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:42.086Z,1516400982.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:42.478Z,1516400982.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:42.493Z,1516400982.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:42.875Z,1516400982.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:42.895Z,1516400982.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:43.282Z,1516400983.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:43.296Z,1516400983.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:43.657Z,1516400983.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:43.694Z,1516400983.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:44.060Z,1516400984.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:44.086Z,1516400984.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:44.479Z,1516400984.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:44.498Z,1516400984.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:44.883Z,1516400984.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:44.897Z,1516400984.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:45.279Z,1516400985.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:45.293Z,1516400985.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:45.660Z,1516400985.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:45.687Z,1516400985.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:46.055Z,1516400986.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:46.081Z,1516400986.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:46.466Z,1516400986.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:46.490Z,1516400986.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:46.874Z,1516400986.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:46.889Z,1516400986.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:47.271Z,1516400987.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:47.299Z,1516400987.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:47.652Z,1516400987.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:47.686Z,1516400987.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:48.060Z,1516400988.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:48.084Z,1516400988.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:48.474Z,1516400988.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:48.488Z,1516400988.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:48.874Z,1516400988.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:48.894Z,1516400988.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:49.278Z,1516400989.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:49.292Z,1516400989.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:49.656Z,1516400989.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:49.687Z,1516400989.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:50.059Z,1516400990.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:50.085Z,1516400990.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:50.478Z,1516400990.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:50.492Z,1516400990.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:50.877Z,1516400990.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:50.895Z,1516400990.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:51.262Z,1516400991.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:51.294Z,1516400991.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:51.660Z,1516400991.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:51.685Z,1516400991.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:52.055Z,1516400992.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:52.087Z,1516400992.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:52.480Z,1516400992.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:52.494Z,1516400992.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:52.882Z,1516400992.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:52.896Z,1516400992.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:53.266Z,1516400993.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:53.298Z,1516400993.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:53.660Z,1516400993.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:53.691Z,1516400993.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:54.059Z,1516400994.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:54.090Z,1516400994.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:54.466Z,1516400994.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:54.491Z,1516400994.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:54.866Z,1516400994.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:54.892Z,1516400994.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:55.278Z,1516400995.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:55.292Z,1516400995.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:55.656Z,1516400995.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:55.686Z,1516400995.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:56.059Z,1516400996.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:56.098Z,1516400996.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:56.470Z,1516400996.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:56.495Z,1516400996.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:56.886Z,1516400996.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:56.907Z,1516400996.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:57.270Z,1516400997.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:57.303Z,1516400997.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:57.660Z,1516400997.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:57.691Z,1516400997.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:58.059Z,1516400998.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:58.074Z,1516400998.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:58.474Z,1516400998.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:58.498Z,1516400998.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:58.878Z,1516400998.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:58.907Z,1516400998.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:59.274Z,1516400999.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:59.295Z,1516400999.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:29:59.661Z,1516400999.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:29:59.675Z,1516400999.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:00.060Z,1516401000.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:00.079Z,1516401000.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:00.472Z,1516401000.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:00.490Z,1516401000.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:00.874Z,1516401000.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:00.888Z,1516401000.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:01.277Z,1516401001.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:01.291Z,1516401001.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:01.656Z,1516401001.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:01.687Z,1516401001.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:02.059Z,1516401002.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:02.085Z,1516401002.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:02.088Z,1516401002.088 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T22:25:01.8Z
2018-01-19T22:30:02.088Z,1516401002.088 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T22:30:02.089Z,1516401002.089 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T22:30:02.478Z,1516401002.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:02.492Z,1516401002.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:02.927Z,1516401002.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:02.947Z,1516401002.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:03.279Z,1516401003.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:03.293Z,1516401003.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:06.435Z,1516401006.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:06.450Z,1516401006.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:06.533Z,1516401006.533 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0032.lzma
2018-01-19T22:30:06.554Z,1516401006.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:06.587Z,1516401006.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:06.914Z,1516401006.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:06.943Z,1516401006.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:07.275Z,1516401007.275 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0032.lzma.bak
2018-01-19T22:30:07.275Z,1516401007.275 [DataOverHttps](INFO): SBD MOMSN=7724502
2018-01-19T22:30:07.335Z,1516401007.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:07.355Z,1516401007.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:07.798Z,1516401007.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:07.835Z,1516401007.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:08.099Z,1516401008.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:08.138Z,1516401008.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:11.195Z,1516401011.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:11.210Z,1516401011.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:11.304Z,1516401011.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:11.342Z,1516401011.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:11.702Z,1516401011.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:11.716Z,1516401011.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:12.110Z,1516401012.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:12.140Z,1516401012.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:12.510Z,1516401012.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:12.524Z,1516401012.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:12.901Z,1516401012.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:12.915Z,1516401012.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:15.993Z,1516401015.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:16.007Z,1516401016.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:16.083Z,1516401016.083 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20180119T210901/Express0033.lzma
2018-01-19T22:30:16.104Z,1516401016.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:16.150Z,1516401016.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:16.474Z,1516401016.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:16.500Z,1516401016.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:16.839Z,1516401016.839 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0033.lzma.bak
2018-01-19T22:30:16.839Z,1516401016.839 [DataOverHttps](INFO): SBD MOMSN=7724504
2018-01-19T22:30:16.897Z,1516401016.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:16.911Z,1516401016.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:17.362Z,1516401017.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:17.376Z,1516401017.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:17.395Z,1516401017.395 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T22:30:17.396Z,1516401017.396 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T22:30:17.396Z,1516401017.396 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T22:30:17.665Z,1516401017.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:17.679Z,1516401017.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:20.755Z,1516401020.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:20.770Z,1516401020.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:20.868Z,1516401020.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:20.908Z,1516401020.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:21.242Z,1516401021.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:21.256Z,1516401021.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:21.640Z,1516401021.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:21.655Z,1516401021.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:22.038Z,1516401022.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:22.053Z,1516401022.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:22.431Z,1516401022.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:22.461Z,1516401022.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:22.816Z,1516401022.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:22.850Z,1516401022.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:23.223Z,1516401023.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:23.263Z,1516401023.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:23.630Z,1516401023.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:23.644Z,1516401023.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:24.038Z,1516401024.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:24.071Z,1516401024.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:24.434Z,1516401024.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:24.448Z,1516401024.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:24.824Z,1516401024.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:24.843Z,1516401024.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:25.224Z,1516401025.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:25.238Z,1516401025.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:25.624Z,1516401025.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:25.639Z,1516401025.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:26.022Z,1516401026.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:26.036Z,1516401026.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:26.424Z,1516401026.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:26.438Z,1516401026.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:26.839Z,1516401026.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:26.869Z,1516401026.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:27.234Z,1516401027.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:27.248Z,1516401027.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:27.630Z,1516401027.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:27.650Z,1516401027.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:28.025Z,1516401028.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:28.039Z,1516401028.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:28.423Z,1516401028.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:28.437Z,1516401028.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:28.820Z,1516401028.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:28.834Z,1516401028.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:29.227Z,1516401029.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:29.241Z,1516401029.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:29.628Z,1516401029.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:29.647Z,1516401029.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:30.034Z,1516401030.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:30.048Z,1516401030.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:30.430Z,1516401030.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:30.444Z,1516401030.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:30.827Z,1516401030.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:30.841Z,1516401030.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:31.228Z,1516401031.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:31.241Z,1516401031.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:31.627Z,1516401031.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:31.642Z,1516401031.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:32.027Z,1516401032.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:32.041Z,1516401032.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:32.420Z,1516401032.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:32.439Z,1516401032.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:32.830Z,1516401032.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:32.845Z,1516401032.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:33.234Z,1516401033.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:33.248Z,1516401033.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:33.630Z,1516401033.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:33.650Z,1516401033.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:34.025Z,1516401034.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:34.039Z,1516401034.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:34.423Z,1516401034.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:34.437Z,1516401034.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:34.827Z,1516401034.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:34.841Z,1516401034.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:35.227Z,1516401035.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:35.241Z,1516401035.241 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:35.241Z,1516401035.241 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-01-19T22:30:35.242Z,1516401035.242 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:30:35.243Z,1516401035.243 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:35.243Z,1516401035.243 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-01-19T22:30:35.243Z,1516401035.243 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:30:35.245Z,1516401035.245 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:35.245Z,1516401035.245 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2018-01-19T22:30:35.245Z,1516401035.245 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:30:35.269Z,1516401035.269 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:30:35.269Z,1516401035.269 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:30:35.270Z,1516401035.270 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:30:35.638Z,1516401035.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:35.679Z,1516401035.679 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:30:35.679Z,1516401035.679 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-01-19T22:30:35.680Z,1516401035.680 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:30:35.680Z,1516401035.680 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-01-19T22:30:35.680Z,1516401035.680 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:30:35.680Z,1516401035.680 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2018-01-19T22:30:36.032Z,1516401036.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:36.066Z,1516401036.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:30:36.067Z,1516401036.067 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:30:36.067Z,1516401036.067 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:30:36.067Z,1516401036.067 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:30:36.068Z,1516401036.068 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:30:36.068Z,1516401036.068 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:30:36.068Z,1516401036.068 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:30:36.069Z,1516401036.069 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:30:36.069Z,1516401036.069 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:30:36.437Z,1516401036.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:36.451Z,1516401036.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:30:36.452Z,1516401036.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:36.815Z,1516401036.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:36.846Z,1516401036.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:30:36.847Z,1516401036.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:37.210Z,1516401037.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:37.248Z,1516401037.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:30:37.249Z,1516401037.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:37.619Z,1516401037.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:37.644Z,1516401037.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:30:37.645Z,1516401037.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:38.016Z,1516401038.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:38.049Z,1516401038.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:30:38.050Z,1516401038.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:38.419Z,1516401038.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:38.445Z,1516401038.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:30:38.446Z,1516401038.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:38.838Z,1516401038.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:38.852Z,1516401038.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T22:30:38.853Z,1516401038.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:39.235Z,1516401039.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:39.255Z,1516401039.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T22:30:39.255Z,1516401039.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:39.625Z,1516401039.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:39.659Z,1516401039.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T22:30:39.660Z,1516401039.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:40.042Z,1516401040.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:40.056Z,1516401040.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T22:30:40.057Z,1516401040.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:40.415Z,1516401040.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:40.446Z,1516401040.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T22:30:40.446Z,1516401040.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:40.812Z,1516401040.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:40.847Z,1516401040.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T22:30:40.847Z,1516401040.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:41.219Z,1516401041.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:41.244Z,1516401041.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T22:30:41.245Z,1516401041.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:41.634Z,1516401041.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:41.651Z,1516401041.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T22:30:41.652Z,1516401041.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:42.034Z,1516401042.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:42.056Z,1516401042.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:30:42.057Z,1516401042.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:42.438Z,1516401042.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:42.458Z,1516401042.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:30:42.459Z,1516401042.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:42.815Z,1516401042.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:42.846Z,1516401042.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:30:42.847Z,1516401042.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:43.215Z,1516401043.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:43.251Z,1516401043.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:30:43.252Z,1516401043.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:43.617Z,1516401043.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:43.646Z,1516401043.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:30:43.646Z,1516401043.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:44.050Z,1516401044.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:44.064Z,1516401044.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:30:44.065Z,1516401044.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:44.419Z,1516401044.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:44.445Z,1516401044.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:30:44.446Z,1516401044.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:44.838Z,1516401044.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:44.873Z,1516401044.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T22:30:44.874Z,1516401044.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:45.241Z,1516401045.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:45.255Z,1516401045.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:30:45.256Z,1516401045.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:45.622Z,1516401045.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:45.656Z,1516401045.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:30:45.657Z,1516401045.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:46.013Z,1516401046.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:46.027Z,1516401046.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:30:46.028Z,1516401046.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:46.419Z,1516401046.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:46.454Z,1516401046.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:30:46.455Z,1516401046.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:46.828Z,1516401046.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:46.857Z,1516401046.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:30:46.858Z,1516401046.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:47.220Z,1516401047.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:47.250Z,1516401047.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T22:30:47.251Z,1516401047.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:47.630Z,1516401047.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:47.655Z,1516401047.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T22:30:47.656Z,1516401047.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:48.046Z,1516401048.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:48.060Z,1516401048.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T22:30:48.061Z,1516401048.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:48.434Z,1516401048.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:48.459Z,1516401048.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T22:30:48.459Z,1516401048.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:48.822Z,1516401048.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:48.835Z,1516401048.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T22:30:48.836Z,1516401048.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:49.224Z,1516401049.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:49.237Z,1516401049.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T22:30:49.238Z,1516401049.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:49.611Z,1516401049.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:49.637Z,1516401049.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T22:30:49.638Z,1516401049.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:50.025Z,1516401050.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:50.039Z,1516401050.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:30:50.040Z,1516401050.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:50.421Z,1516401050.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:50.435Z,1516401050.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:30:50.436Z,1516401050.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:50.826Z,1516401050.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:50.841Z,1516401050.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T22:30:50.842Z,1516401050.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:51.238Z,1516401051.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:51.267Z,1516401051.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T22:30:51.268Z,1516401051.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:51.630Z,1516401051.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:51.643Z,1516401051.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T22:30:51.644Z,1516401051.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:52.022Z,1516401052.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:52.041Z,1516401052.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T22:30:52.042Z,1516401052.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:52.425Z,1516401052.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:52.439Z,1516401052.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T22:30:52.440Z,1516401052.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:52.824Z,1516401052.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:52.838Z,1516401052.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T22:30:52.839Z,1516401052.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:53.220Z,1516401053.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:53.234Z,1516401053.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T22:30:53.235Z,1516401053.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:53.626Z,1516401053.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:53.641Z,1516401053.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T22:30:53.642Z,1516401053.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:54.038Z,1516401054.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:54.052Z,1516401054.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T22:30:54.078Z,1516401054.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:54.438Z,1516401054.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:54.471Z,1516401054.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T22:30:54.472Z,1516401054.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:54.821Z,1516401054.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:54.839Z,1516401054.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T22:30:54.840Z,1516401054.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:55.229Z,1516401055.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:55.243Z,1516401055.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:55.613Z,1516401055.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:55.639Z,1516401055.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:56.027Z,1516401056.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:56.047Z,1516401056.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:56.429Z,1516401056.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:56.443Z,1516401056.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:56.829Z,1516401056.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:56.851Z,1516401056.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:57.231Z,1516401057.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:57.245Z,1516401057.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:57.631Z,1516401057.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:57.644Z,1516401057.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:58.018Z,1516401058.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:58.046Z,1516401058.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:58.427Z,1516401058.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:58.442Z,1516401058.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:58.825Z,1516401058.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:58.843Z,1516401058.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:59.227Z,1516401059.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:59.242Z,1516401059.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:30:59.633Z,1516401059.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:30:59.648Z,1516401059.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:00.037Z,1516401060.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:00.052Z,1516401060.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:00.437Z,1516401060.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:00.451Z,1516401060.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:00.818Z,1516401060.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:00.840Z,1516401060.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:01.222Z,1516401061.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:01.245Z,1516401061.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:01.621Z,1516401061.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:01.638Z,1516401061.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:02.035Z,1516401062.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:02.055Z,1516401062.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:02.427Z,1516401062.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:02.441Z,1516401062.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:02.826Z,1516401062.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:02.853Z,1516401062.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:03.240Z,1516401063.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:03.259Z,1516401063.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:03.638Z,1516401063.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:03.652Z,1516401063.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:04.013Z,1516401064.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:04.039Z,1516401064.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:04.419Z,1516401064.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:04.444Z,1516401064.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:04.812Z,1516401064.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:04.843Z,1516401064.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:05.219Z,1516401065.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:05.244Z,1516401065.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:05.641Z,1516401065.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:05.656Z,1516401065.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:06.042Z,1516401066.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:06.056Z,1516401066.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:06.438Z,1516401066.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:06.452Z,1516401066.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:06.816Z,1516401066.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:06.842Z,1516401066.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:07.215Z,1516401067.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:07.243Z,1516401067.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:07.619Z,1516401067.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:07.644Z,1516401067.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:08.016Z,1516401068.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:08.050Z,1516401068.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:08.420Z,1516401068.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:08.446Z,1516401068.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:08.834Z,1516401068.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:08.849Z,1516401068.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:09.235Z,1516401069.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:09.255Z,1516401069.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:09.635Z,1516401069.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:09.649Z,1516401069.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:10.013Z,1516401070.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:10.039Z,1516401070.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:10.419Z,1516401070.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:10.450Z,1516401070.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:10.820Z,1516401070.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:10.851Z,1516401070.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:11.219Z,1516401071.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:11.250Z,1516401071.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:11.638Z,1516401071.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:11.653Z,1516401071.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:12.039Z,1516401072.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:12.053Z,1516401072.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:12.438Z,1516401072.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:12.452Z,1516401072.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:12.815Z,1516401072.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:12.850Z,1516401072.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:13.213Z,1516401073.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:13.227Z,1516401073.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:13.615Z,1516401073.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:13.651Z,1516401073.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:14.017Z,1516401074.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:14.031Z,1516401074.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:14.423Z,1516401074.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:14.437Z,1516401074.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:14.827Z,1516401074.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:14.860Z,1516401074.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:15.234Z,1516401075.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:15.256Z,1516401075.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:15.633Z,1516401075.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:15.661Z,1516401075.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:16.012Z,1516401076.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:16.035Z,1516401076.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:16.427Z,1516401076.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:16.442Z,1516401076.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:16.826Z,1516401076.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:16.841Z,1516401076.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:17.221Z,1516401077.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:17.235Z,1516401077.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:17.638Z,1516401077.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:17.667Z,1516401077.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:18.028Z,1516401078.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:18.046Z,1516401078.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:21.119Z,1516401081.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:21.139Z,1516401081.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:21.242Z,1516401081.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:21.272Z,1516401081.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:21.622Z,1516401081.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:21.647Z,1516401081.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:22.028Z,1516401082.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:22.042Z,1516401082.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:22.423Z,1516401082.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:22.443Z,1516401082.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:22.831Z,1516401082.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:22.845Z,1516401082.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:23.231Z,1516401083.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:23.258Z,1516401083.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:23.632Z,1516401083.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:23.651Z,1516401083.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:24.024Z,1516401084.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:24.038Z,1516401084.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:24.428Z,1516401084.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:24.447Z,1516401084.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:24.818Z,1516401084.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:24.845Z,1516401084.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:25.228Z,1516401085.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:25.241Z,1516401085.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:25.635Z,1516401085.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:25.655Z,1516401085.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:26.038Z,1516401086.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:26.052Z,1516401086.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:26.430Z,1516401086.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:26.444Z,1516401086.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:26.812Z,1516401086.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:26.843Z,1516401086.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:27.217Z,1516401087.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:27.246Z,1516401087.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:27.618Z,1516401087.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:27.654Z,1516401087.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:28.042Z,1516401088.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:28.056Z,1516401088.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:28.424Z,1516401088.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:28.459Z,1516401088.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:28.818Z,1516401088.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:28.857Z,1516401088.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:29.213Z,1516401089.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:29.258Z,1516401089.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:29.639Z,1516401089.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:29.653Z,1516401089.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:30.042Z,1516401090.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:30.056Z,1516401090.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:30.440Z,1516401090.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:30.455Z,1516401090.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:30.818Z,1516401090.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:30.855Z,1516401090.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:31.221Z,1516401091.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:31.255Z,1516401091.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:31.621Z,1516401091.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:31.647Z,1516401091.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:32.027Z,1516401092.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:32.062Z,1516401092.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:32.430Z,1516401092.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:32.459Z,1516401092.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:32.817Z,1516401092.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:32.862Z,1516401092.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:33.220Z,1516401093.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:33.227Z,1516401093.227 [PNI_TCM](ERROR): CRC does not match. Expected:0x28053 got:0x49482
2018-01-19T22:31:33.262Z,1516401093.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:33.634Z,1516401093.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:33.663Z,1516401093.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:34.022Z,1516401094.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:34.058Z,1516401094.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:34.436Z,1516401094.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:34.458Z,1516401094.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:34.823Z,1516401094.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:34.837Z,1516401094.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:35.216Z,1516401095.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:35.239Z,1516401095.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:35.627Z,1516401095.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:35.666Z,1516401095.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:36.028Z,1516401096.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:36.037Z,1516401096.037 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2018-01-19T22:31:36.073Z,1516401096.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:36.428Z,1516401096.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:36.443Z,1516401096.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:36.827Z,1516401096.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:36.842Z,1516401096.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:37.223Z,1516401097.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:37.252Z,1516401097.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:37.625Z,1516401097.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:37.644Z,1516401097.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:38.032Z,1516401098.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:38.072Z,1516401098.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:38.427Z,1516401098.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:38.443Z,1516401098.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:38.823Z,1516401098.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:38.867Z,1516401098.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:39.222Z,1516401099.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:39.241Z,1516401099.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:39.628Z,1516401099.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:39.643Z,1516401099.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:40.032Z,1516401100.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:40.051Z,1516401100.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:40.424Z,1516401100.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:40.466Z,1516401100.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:40.821Z,1516401100.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:40.837Z,1516401100.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:41.224Z,1516401101.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:41.241Z,1516401101.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:41.628Z,1516401101.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:41.643Z,1516401101.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:42.030Z,1516401102.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:42.067Z,1516401102.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:42.423Z,1516401102.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:42.446Z,1516401102.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:42.823Z,1516401102.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:42.841Z,1516401102.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:43.226Z,1516401103.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:43.240Z,1516401103.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:43.623Z,1516401103.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:43.667Z,1516401103.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:44.030Z,1516401104.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:44.048Z,1516401104.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:44.431Z,1516401104.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:44.447Z,1516401104.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:44.817Z,1516401104.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:44.866Z,1516401104.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:45.223Z,1516401105.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:45.267Z,1516401105.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:45.630Z,1516401105.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:45.648Z,1516401105.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:46.027Z,1516401106.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:46.045Z,1516401106.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:46.431Z,1516401106.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:46.445Z,1516401106.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:46.824Z,1516401106.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:46.867Z,1516401106.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:47.224Z,1516401107.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:47.239Z,1516401107.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:47.623Z,1516401107.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:47.645Z,1516401107.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:48.032Z,1516401108.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:48.050Z,1516401108.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:48.430Z,1516401108.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:48.474Z,1516401108.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:48.828Z,1516401108.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:48.849Z,1516401108.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:49.224Z,1516401109.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:49.242Z,1516401109.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:49.605Z,1516401109.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:49.642Z,1516401109.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:50.016Z,1516401110.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:50.041Z,1516401110.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:50.411Z,1516401110.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:50.439Z,1516401110.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:50.830Z,1516401110.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:50.848Z,1516401110.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:51.233Z,1516401111.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:51.255Z,1516401111.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:51.635Z,1516401111.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:51.672Z,1516401111.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:52.015Z,1516401112.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:52.040Z,1516401112.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:52.411Z,1516401112.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:52.444Z,1516401112.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:52.812Z,1516401112.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:52.848Z,1516401112.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:53.216Z,1516401113.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:53.246Z,1516401113.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:53.611Z,1516401113.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:53.646Z,1516401113.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:54.035Z,1516401114.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:54.054Z,1516401114.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:54.438Z,1516401114.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:54.454Z,1516401114.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:54.822Z,1516401114.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:54.863Z,1516401114.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:55.215Z,1516401115.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:55.248Z,1516401115.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:55.615Z,1516401115.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:55.647Z,1516401115.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:56.016Z,1516401116.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:56.048Z,1516401116.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:56.415Z,1516401116.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:56.451Z,1516401116.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:56.826Z,1516401116.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:56.852Z,1516401116.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:57.226Z,1516401117.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:57.262Z,1516401117.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:57.622Z,1516401117.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:57.658Z,1516401117.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:58.015Z,1516401118.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:58.050Z,1516401118.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:58.415Z,1516401118.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:58.450Z,1516401118.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:58.812Z,1516401118.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:58.847Z,1516401118.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:59.216Z,1516401119.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:59.230Z,1516401119.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:31:59.618Z,1516401119.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:31:59.632Z,1516401119.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:00.030Z,1516401120.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:00.065Z,1516401120.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:00.426Z,1516401120.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:00.440Z,1516401120.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:00.834Z,1516401120.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:00.866Z,1516401120.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:01.217Z,1516401121.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:01.239Z,1516401121.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:01.615Z,1516401121.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:01.630Z,1516401121.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:02.018Z,1516401122.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:02.036Z,1516401122.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:02.421Z,1516401122.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:02.435Z,1516401122.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:02.834Z,1516401122.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:02.864Z,1516401122.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:03.234Z,1516401123.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:03.264Z,1516401123.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:03.626Z,1516401123.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:03.640Z,1516401123.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:04.021Z,1516401124.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:04.035Z,1516401124.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:04.421Z,1516401124.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:04.435Z,1516401124.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:04.817Z,1516401124.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:04.832Z,1516401124.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:05.215Z,1516401125.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:05.242Z,1516401125.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:05.624Z,1516401125.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:05.638Z,1516401125.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:06.027Z,1516401126.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:06.041Z,1516401126.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:06.431Z,1516401126.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:06.445Z,1516401126.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:06.827Z,1516401126.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:06.842Z,1516401126.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:07.216Z,1516401127.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:07.231Z,1516401127.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:07.610Z,1516401127.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:07.637Z,1516401127.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:08.024Z,1516401128.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:08.040Z,1516401128.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:08.414Z,1516401128.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:08.439Z,1516401128.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:08.830Z,1516401128.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:08.845Z,1516401128.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:09.229Z,1516401129.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:09.243Z,1516401129.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:09.627Z,1516401129.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:09.641Z,1516401129.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:10.010Z,1516401130.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:10.040Z,1516401130.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:10.419Z,1516401130.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:10.439Z,1516401130.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:10.815Z,1516401130.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:10.829Z,1516401130.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:11.212Z,1516401131.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:11.234Z,1516401131.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:11.614Z,1516401131.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:11.637Z,1516401131.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:12.027Z,1516401132.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:12.041Z,1516401132.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:12.430Z,1516401132.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:12.445Z,1516401132.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:12.829Z,1516401132.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:12.843Z,1516401132.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:13.221Z,1516401133.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:13.235Z,1516401133.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:13.611Z,1516401133.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:13.634Z,1516401133.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:14.027Z,1516401134.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:14.042Z,1516401134.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:14.408Z,1516401134.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:14.440Z,1516401134.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:14.827Z,1516401134.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:14.842Z,1516401134.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:15.233Z,1516401135.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:15.247Z,1516401135.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:15.632Z,1516401135.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:15.646Z,1516401135.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:16.007Z,1516401136.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:16.039Z,1516401136.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:16.421Z,1516401136.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:16.441Z,1516401136.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:16.807Z,1516401136.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:16.835Z,1516401136.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:17.224Z,1516401137.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:17.239Z,1516401137.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:17.614Z,1516401137.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:17.636Z,1516401137.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:18.027Z,1516401138.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:18.041Z,1516401138.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:18.433Z,1516401138.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:18.448Z,1516401138.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:21.554Z,1516401141.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:21.582Z,1516401141.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:21.684Z,1516401141.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:21.707Z,1516401141.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:22.036Z,1516401142.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:22.078Z,1516401142.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:22.441Z,1516401142.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:22.455Z,1516401142.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:22.833Z,1516401142.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:22.847Z,1516401142.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:23.234Z,1516401143.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:23.248Z,1516401143.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:23.632Z,1516401143.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:23.646Z,1516401143.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:24.036Z,1516401144.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:24.055Z,1516401144.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:24.442Z,1516401144.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:24.456Z,1516401144.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:24.849Z,1516401144.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:24.863Z,1516401144.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:25.233Z,1516401145.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:25.248Z,1516401145.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:25.636Z,1516401145.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:25.651Z,1516401145.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:26.037Z,1516401146.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:26.051Z,1516401146.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:26.431Z,1516401146.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:26.451Z,1516401146.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:26.850Z,1516401146.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:26.882Z,1516401146.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:27.242Z,1516401147.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:27.256Z,1516401147.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:27.641Z,1516401147.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:27.656Z,1516401147.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:28.035Z,1516401148.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:28.049Z,1516401148.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:28.432Z,1516401148.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:28.445Z,1516401148.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:28.833Z,1516401148.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:28.847Z,1516401148.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:29.231Z,1516401149.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:29.252Z,1516401149.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:29.632Z,1516401149.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:29.650Z,1516401149.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:30.042Z,1516401150.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:30.057Z,1516401150.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:30.446Z,1516401150.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:30.460Z,1516401150.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:30.842Z,1516401150.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:30.863Z,1516401150.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:31.239Z,1516401151.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:31.253Z,1516401151.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:31.635Z,1516401151.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:31.649Z,1516401151.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:32.032Z,1516401152.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:32.046Z,1516401152.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:32.431Z,1516401152.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:32.445Z,1516401152.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:32.839Z,1516401152.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:32.859Z,1516401152.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:33.246Z,1516401153.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:33.260Z,1516401153.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:33.638Z,1516401153.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:33.665Z,1516401153.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:34.039Z,1516401154.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:34.059Z,1516401154.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:34.440Z,1516401154.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:34.454Z,1516401154.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:34.857Z,1516401154.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:34.871Z,1516401154.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:35.237Z,1516401155.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:35.259Z,1516401155.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:35.637Z,1516401155.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:35.651Z,1516401155.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:36.042Z,1516401156.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:36.056Z,1516401156.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:36.449Z,1516401156.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:36.463Z,1516401156.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:36.840Z,1516401156.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:36.863Z,1516401156.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:37.223Z,1516401157.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:37.254Z,1516401157.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:37.627Z,1516401157.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:37.652Z,1516401157.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:38.024Z,1516401158.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:38.059Z,1516401158.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:38.431Z,1516401158.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:38.456Z,1516401158.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:38.846Z,1516401158.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:38.860Z,1516401158.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:39.250Z,1516401159.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:39.264Z,1516401159.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:39.634Z,1516401159.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:39.668Z,1516401159.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:40.027Z,1516401160.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:40.059Z,1516401160.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:40.423Z,1516401160.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:40.459Z,1516401160.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:40.825Z,1516401160.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:40.847Z,1516401160.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:41.232Z,1516401161.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:41.262Z,1516401161.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:41.623Z,1516401161.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:41.666Z,1516401161.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:42.034Z,1516401162.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:42.059Z,1516401162.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:42.446Z,1516401162.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:42.468Z,1516401162.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:42.834Z,1516401162.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:42.867Z,1516401162.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:43.231Z,1516401163.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:43.262Z,1516401163.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:43.631Z,1516401163.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:43.662Z,1516401163.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:44.028Z,1516401164.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:44.064Z,1516401164.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:44.431Z,1516401164.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:44.464Z,1516401164.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:44.850Z,1516401164.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:44.865Z,1516401164.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:45.255Z,1516401165.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:45.269Z,1516401165.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:45.638Z,1516401165.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:45.674Z,1516401165.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:46.030Z,1516401166.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:46.060Z,1516401166.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:46.432Z,1516401166.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:46.472Z,1516401166.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:46.822Z,1516401166.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:46.837Z,1516401166.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:47.241Z,1516401167.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:47.269Z,1516401167.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:47.636Z,1516401167.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:47.673Z,1516401167.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:48.043Z,1516401168.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:48.068Z,1516401168.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:48.457Z,1516401168.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:48.471Z,1516401168.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:48.846Z,1516401168.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:48.877Z,1516401168.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:49.225Z,1516401169.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:49.248Z,1516401169.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:49.636Z,1516401169.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:49.660Z,1516401169.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:50.032Z,1516401170.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:50.047Z,1516401170.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:50.436Z,1516401170.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:50.451Z,1516401170.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:50.838Z,1516401170.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:50.853Z,1516401170.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:51.250Z,1516401171.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:51.264Z,1516401171.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:51.637Z,1516401171.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:51.651Z,1516401171.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:52.033Z,1516401172.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:52.052Z,1516401172.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:52.436Z,1516401172.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:52.450Z,1516401172.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:52.831Z,1516401172.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:52.845Z,1516401172.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:53.232Z,1516401173.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:53.260Z,1516401173.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:53.636Z,1516401173.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:53.650Z,1516401173.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:54.050Z,1516401174.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:54.064Z,1516401174.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:54.442Z,1516401174.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:54.456Z,1516401174.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:54.846Z,1516401174.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:54.863Z,1516401174.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:55.234Z,1516401175.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:55.248Z,1516401175.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:55.634Z,1516401175.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:55.653Z,1516401175.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:56.040Z,1516401176.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:56.054Z,1516401176.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:56.445Z,1516401176.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:56.460Z,1516401176.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:56.844Z,1516401176.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:56.858Z,1516401176.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:57.247Z,1516401177.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:57.261Z,1516401177.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:57.642Z,1516401177.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:57.656Z,1516401177.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:58.039Z,1516401178.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:58.054Z,1516401178.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:58.439Z,1516401178.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:58.454Z,1516401178.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:58.826Z,1516401178.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:58.846Z,1516401178.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:59.232Z,1516401179.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:59.260Z,1516401179.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:32:59.640Z,1516401179.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:32:59.654Z,1516401179.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:00.044Z,1516401180.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:00.059Z,1516401180.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:00.444Z,1516401180.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:00.463Z,1516401180.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:00.845Z,1516401180.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:00.859Z,1516401180.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:01.239Z,1516401181.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:01.259Z,1516401181.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:01.630Z,1516401181.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:01.652Z,1516401181.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:02.024Z,1516401182.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:02.058Z,1516401182.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:02.439Z,1516401182.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:02.453Z,1516401182.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:02.846Z,1516401182.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:02.860Z,1516401182.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:03.249Z,1516401183.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:03.263Z,1516401183.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:03.643Z,1516401183.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:03.657Z,1516401183.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:04.034Z,1516401184.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:04.052Z,1516401184.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:04.423Z,1516401184.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:04.449Z,1516401184.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:04.821Z,1516401184.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:04.854Z,1516401184.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:05.234Z,1516401185.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:05.253Z,1516401185.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:05.630Z,1516401185.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:05.662Z,1516401185.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:06.049Z,1516401186.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:06.064Z,1516401186.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:06.448Z,1516401186.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:06.463Z,1516401186.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:06.846Z,1516401186.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:06.863Z,1516401186.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:07.242Z,1516401187.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:07.273Z,1516401187.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:07.639Z,1516401187.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:07.659Z,1516401187.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:08.030Z,1516401188.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:08.044Z,1516401188.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:08.427Z,1516401188.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:08.458Z,1516401188.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:08.846Z,1516401188.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:08.860Z,1516401188.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:09.248Z,1516401189.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:09.267Z,1516401189.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:09.646Z,1516401189.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:09.660Z,1516401189.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:10.027Z,1516401190.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:10.059Z,1516401190.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:10.427Z,1516401190.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:10.463Z,1516401190.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:10.821Z,1516401190.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:10.835Z,1516401190.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:11.228Z,1516401191.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:11.242Z,1516401191.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:11.635Z,1516401191.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:11.670Z,1516401191.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:12.042Z,1516401192.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:12.065Z,1516401192.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:12.458Z,1516401192.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:12.472Z,1516401192.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:12.857Z,1516401192.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:12.871Z,1516401192.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:13.232Z,1516401193.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:13.267Z,1516401193.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:13.635Z,1516401193.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:13.675Z,1516401193.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:14.029Z,1516401194.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:14.044Z,1516401194.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:14.428Z,1516401194.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:14.443Z,1516401194.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:14.846Z,1516401194.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:14.875Z,1516401194.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:15.246Z,1516401195.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:15.274Z,1516401195.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:15.634Z,1516401195.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:15.648Z,1516401195.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:16.032Z,1516401196.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:16.051Z,1516401196.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:16.433Z,1516401196.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:16.455Z,1516401196.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:16.832Z,1516401196.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:16.847Z,1516401196.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:17.235Z,1516401197.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:17.249Z,1516401197.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:17.637Z,1516401197.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:17.651Z,1516401197.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:18.034Z,1516401198.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:18.049Z,1516401198.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:18.446Z,1516401198.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:18.460Z,1516401198.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:21.538Z,1516401201.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:21.559Z,1516401201.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:21.652Z,1516401201.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:21.690Z,1516401201.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:22.043Z,1516401202.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:22.063Z,1516401202.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:22.448Z,1516401202.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:22.463Z,1516401202.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:22.858Z,1516401202.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:22.888Z,1516401202.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:23.262Z,1516401203.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:23.283Z,1516401203.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:23.658Z,1516401203.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:23.693Z,1516401203.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:24.045Z,1516401204.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:24.059Z,1516401204.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:24.445Z,1516401204.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:24.459Z,1516401204.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:24.845Z,1516401204.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:24.860Z,1516401204.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:25.247Z,1516401205.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:25.261Z,1516401205.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:25.645Z,1516401205.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:25.659Z,1516401205.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:26.046Z,1516401206.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:26.060Z,1516401206.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:26.447Z,1516401206.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:26.462Z,1516401206.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:26.859Z,1516401206.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:26.893Z,1516401206.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:27.249Z,1516401207.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:27.264Z,1516401207.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:27.639Z,1516401207.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:27.653Z,1516401207.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:28.042Z,1516401208.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:28.070Z,1516401208.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:28.448Z,1516401208.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:28.462Z,1516401208.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:28.853Z,1516401208.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:28.868Z,1516401208.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:29.254Z,1516401209.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:29.276Z,1516401209.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:29.653Z,1516401209.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:29.668Z,1516401209.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:30.034Z,1516401210.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:30.056Z,1516401210.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:30.438Z,1516401210.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:30.456Z,1516401210.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:30.846Z,1516401210.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:30.884Z,1516401210.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:31.245Z,1516401211.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:31.268Z,1516401211.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:31.637Z,1516401211.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:31.674Z,1516401211.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:32.057Z,1516401212.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:32.116Z,1516401212.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:32.460Z,1516401212.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:32.495Z,1516401212.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:32.848Z,1516401212.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:32.886Z,1516401212.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:33.235Z,1516401213.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:33.269Z,1516401213.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:33.637Z,1516401213.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:33.672Z,1516401213.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:34.063Z,1516401214.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:34.090Z,1516401214.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:34.436Z,1516401214.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:34.459Z,1516401214.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:34.855Z,1516401214.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:34.879Z,1516401214.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:35.260Z,1516401215.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:35.284Z,1516401215.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:35.657Z,1516401215.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:35.716Z,1516401215.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:36.037Z,1516401216.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:36.082Z,1516401216.082 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:36.082Z,1516401216.082 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-01-19T22:33:36.083Z,1516401216.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:33:36.084Z,1516401216.084 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:36.084Z,1516401216.084 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-01-19T22:33:36.084Z,1516401216.084 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:33:36.091Z,1516401216.091 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:36.091Z,1516401216.091 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2018-01-19T22:33:36.091Z,1516401216.091 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:33:36.151Z,1516401216.151 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:33:36.151Z,1516401216.151 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:33:36.152Z,1516401216.152 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:33:36.437Z,1516401216.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:36.505Z,1516401216.505 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:33:36.505Z,1516401216.505 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-01-19T22:33:36.506Z,1516401216.506 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:33:36.506Z,1516401216.506 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-01-19T22:33:36.506Z,1516401216.506 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:33:36.507Z,1516401216.507 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2018-01-19T22:33:36.841Z,1516401216.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:36.877Z,1516401216.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:33:36.878Z,1516401216.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:33:36.878Z,1516401216.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:33:36.878Z,1516401216.878 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:33:36.879Z,1516401216.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:33:36.879Z,1516401216.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:33:36.880Z,1516401216.880 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:33:36.880Z,1516401216.880 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:33:36.880Z,1516401216.880 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:33:37.241Z,1516401217.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:37.263Z,1516401217.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:33:37.264Z,1516401217.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:37.663Z,1516401217.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:37.694Z,1516401217.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:33:37.695Z,1516401217.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:38.048Z,1516401218.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:38.115Z,1516401218.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:33:38.116Z,1516401218.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:38.460Z,1516401218.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:38.487Z,1516401218.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:33:38.487Z,1516401218.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:38.848Z,1516401218.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:38.882Z,1516401218.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:33:38.883Z,1516401218.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:39.242Z,1516401219.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:39.298Z,1516401219.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:33:39.299Z,1516401219.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:39.643Z,1516401219.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:39.685Z,1516401219.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T22:33:39.686Z,1516401219.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:40.077Z,1516401220.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:40.104Z,1516401220.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T22:33:40.104Z,1516401220.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:40.443Z,1516401220.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:40.457Z,1516401220.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T22:33:40.458Z,1516401220.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:40.858Z,1516401220.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:40.872Z,1516401220.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T22:33:40.889Z,1516401220.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:41.250Z,1516401221.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:41.264Z,1516401221.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T22:33:41.265Z,1516401221.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:41.650Z,1516401221.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:41.670Z,1516401221.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T22:33:41.671Z,1516401221.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:42.047Z,1516401222.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:42.066Z,1516401222.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T22:33:42.067Z,1516401222.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:42.447Z,1516401222.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:42.461Z,1516401222.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T22:33:42.462Z,1516401222.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:42.850Z,1516401222.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:42.864Z,1516401222.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:33:42.865Z,1516401222.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:43.254Z,1516401223.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:43.268Z,1516401223.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:33:43.269Z,1516401223.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:43.648Z,1516401223.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:43.666Z,1516401223.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:33:43.667Z,1516401223.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:44.048Z,1516401224.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:44.061Z,1516401224.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:33:44.062Z,1516401224.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:44.447Z,1516401224.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:44.461Z,1516401224.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:33:44.462Z,1516401224.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:44.850Z,1516401224.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:44.864Z,1516401224.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:33:44.865Z,1516401224.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:45.254Z,1516401225.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:45.267Z,1516401225.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:33:45.268Z,1516401225.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:45.650Z,1516401225.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:45.664Z,1516401225.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T22:33:45.665Z,1516401225.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:46.043Z,1516401226.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:46.057Z,1516401226.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:33:46.058Z,1516401226.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:46.447Z,1516401226.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:46.461Z,1516401226.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:33:46.462Z,1516401226.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:46.851Z,1516401226.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:46.865Z,1516401226.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:33:46.866Z,1516401226.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:47.252Z,1516401227.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:47.271Z,1516401227.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:33:47.271Z,1516401227.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:47.650Z,1516401227.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:47.670Z,1516401227.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:33:47.671Z,1516401227.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:48.047Z,1516401228.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:48.066Z,1516401228.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T22:33:48.067Z,1516401228.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:48.446Z,1516401228.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:48.460Z,1516401228.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T22:33:48.461Z,1516401228.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:48.850Z,1516401228.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:48.864Z,1516401228.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T22:33:48.865Z,1516401228.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:49.250Z,1516401229.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:49.264Z,1516401229.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T22:33:49.265Z,1516401229.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:49.647Z,1516401229.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:49.666Z,1516401229.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T22:33:49.667Z,1516401229.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:50.048Z,1516401230.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:50.062Z,1516401230.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T22:33:50.062Z,1516401230.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:50.447Z,1516401230.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:50.461Z,1516401230.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T22:33:50.462Z,1516401230.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:50.850Z,1516401230.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:50.864Z,1516401230.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:33:50.865Z,1516401230.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:51.258Z,1516401231.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:51.272Z,1516401231.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:33:51.272Z,1516401231.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:51.657Z,1516401231.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:51.671Z,1516401231.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T22:33:51.672Z,1516401231.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:52.044Z,1516401232.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:52.058Z,1516401232.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T22:33:52.059Z,1516401232.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:52.431Z,1516401232.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:52.465Z,1516401232.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T22:33:52.466Z,1516401232.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:52.857Z,1516401232.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:52.875Z,1516401232.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T22:33:52.875Z,1516401232.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:53.257Z,1516401233.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:53.271Z,1516401233.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T22:33:53.272Z,1516401233.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:53.655Z,1516401233.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:53.668Z,1516401233.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T22:33:53.669Z,1516401233.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:54.048Z,1516401234.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:54.062Z,1516401234.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T22:33:54.063Z,1516401234.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:54.438Z,1516401234.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:54.460Z,1516401234.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T22:33:54.461Z,1516401234.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:54.854Z,1516401234.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:54.868Z,1516401234.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T22:33:54.869Z,1516401234.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:55.256Z,1516401235.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:55.275Z,1516401235.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T22:33:55.275Z,1516401235.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:55.657Z,1516401235.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:55.675Z,1516401235.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T22:33:55.675Z,1516401235.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:56.048Z,1516401236.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:56.062Z,1516401236.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T22:33:56.063Z,1516401236.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:56.441Z,1516401236.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:56.458Z,1516401236.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:56.854Z,1516401236.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:56.868Z,1516401236.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:57.255Z,1516401237.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:57.269Z,1516401237.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:57.657Z,1516401237.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:57.671Z,1516401237.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:58.042Z,1516401238.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:58.061Z,1516401238.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:58.431Z,1516401238.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:58.466Z,1516401238.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:58.858Z,1516401238.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:58.872Z,1516401238.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:59.257Z,1516401239.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:59.271Z,1516401239.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:33:59.649Z,1516401239.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:33:59.673Z,1516401239.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:00.045Z,1516401240.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:00.059Z,1516401240.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:00.438Z,1516401240.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:00.463Z,1516401240.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:00.859Z,1516401240.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:00.875Z,1516401240.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:01.257Z,1516401241.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:01.271Z,1516401241.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:01.657Z,1516401241.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:01.672Z,1516401241.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:02.051Z,1516401242.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:02.065Z,1516401242.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:02.449Z,1516401242.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:02.463Z,1516401242.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:02.858Z,1516401242.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:02.873Z,1516401242.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:03.260Z,1516401243.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:03.274Z,1516401243.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:03.659Z,1516401243.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:03.675Z,1516401243.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:04.049Z,1516401244.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:04.063Z,1516401244.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:04.448Z,1516401244.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:04.463Z,1516401244.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:04.855Z,1516401244.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:04.869Z,1516401244.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:05.257Z,1516401245.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:05.272Z,1516401245.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:05.658Z,1516401245.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:05.673Z,1516401245.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:06.048Z,1516401246.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:06.063Z,1516401246.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:06.438Z,1516401246.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:06.460Z,1516401246.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:06.855Z,1516401246.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:06.870Z,1516401246.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:07.254Z,1516401247.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:07.268Z,1516401247.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:07.654Z,1516401247.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:07.668Z,1516401247.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:08.049Z,1516401248.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:08.063Z,1516401248.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:08.447Z,1516401248.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:08.467Z,1516401248.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:08.858Z,1516401248.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:08.872Z,1516401248.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:09.258Z,1516401249.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:09.272Z,1516401249.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:09.654Z,1516401249.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:09.668Z,1516401249.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:10.043Z,1516401250.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:10.062Z,1516401250.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:10.449Z,1516401250.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:10.463Z,1516401250.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:10.854Z,1516401250.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:10.869Z,1516401250.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:11.257Z,1516401251.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:11.271Z,1516401251.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:11.658Z,1516401251.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:11.672Z,1516401251.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:12.049Z,1516401252.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:12.063Z,1516401252.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:12.438Z,1516401252.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:12.462Z,1516401252.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:12.848Z,1516401252.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:12.869Z,1516401252.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:13.253Z,1516401253.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:13.268Z,1516401253.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:13.657Z,1516401253.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:13.675Z,1516401253.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:14.049Z,1516401254.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:14.062Z,1516401254.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:14.441Z,1516401254.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:14.463Z,1516401254.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:14.858Z,1516401254.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:14.872Z,1516401254.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:15.261Z,1516401255.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:15.275Z,1516401255.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:15.646Z,1516401255.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:15.667Z,1516401255.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:16.035Z,1516401256.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:16.071Z,1516401256.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:16.440Z,1516401256.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:16.466Z,1516401256.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:16.833Z,1516401256.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:16.856Z,1516401256.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:17.258Z,1516401257.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:17.272Z,1516401257.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:17.646Z,1516401257.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:17.672Z,1516401257.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:18.046Z,1516401258.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:18.071Z,1516401258.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:18.436Z,1516401258.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:18.471Z,1516401258.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:21.530Z,1516401261.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:21.544Z,1516401261.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:21.644Z,1516401261.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:21.687Z,1516401261.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:22.038Z,1516401262.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:22.068Z,1516401262.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:22.442Z,1516401262.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:22.474Z,1516401262.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:22.826Z,1516401262.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:22.840Z,1516401262.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:23.228Z,1516401263.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:23.247Z,1516401263.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:23.624Z,1516401263.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:23.638Z,1516401263.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:24.028Z,1516401264.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:24.047Z,1516401264.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:24.429Z,1516401264.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:24.443Z,1516401264.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:24.828Z,1516401264.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:24.842Z,1516401264.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:25.238Z,1516401265.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:25.252Z,1516401265.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:25.634Z,1516401265.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:25.648Z,1516401265.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:26.041Z,1516401266.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:26.055Z,1516401266.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:26.420Z,1516401266.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:26.435Z,1516401266.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:26.825Z,1516401266.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:26.843Z,1516401266.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:27.231Z,1516401267.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:27.246Z,1516401267.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:27.618Z,1516401267.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:27.638Z,1516401267.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:28.032Z,1516401268.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:28.051Z,1516401268.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:28.438Z,1516401268.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:28.452Z,1516401268.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:28.833Z,1516401268.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:28.847Z,1516401268.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:29.232Z,1516401269.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:29.246Z,1516401269.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:29.631Z,1516401269.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:29.645Z,1516401269.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:30.031Z,1516401270.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:30.051Z,1516401270.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:30.431Z,1516401270.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:30.451Z,1516401270.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:30.831Z,1516401270.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:30.845Z,1516401270.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:31.234Z,1516401271.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:31.249Z,1516401271.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:31.638Z,1516401271.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:31.652Z,1516401271.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:32.034Z,1516401272.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:32.055Z,1516401272.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:32.431Z,1516401272.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:32.445Z,1516401272.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:32.827Z,1516401272.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:32.841Z,1516401272.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:33.224Z,1516401273.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:33.238Z,1516401273.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:33.624Z,1516401273.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:33.642Z,1516401273.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:34.032Z,1516401274.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:34.051Z,1516401274.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:34.438Z,1516401274.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:34.452Z,1516401274.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:34.830Z,1516401274.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:34.852Z,1516401274.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:35.231Z,1516401275.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:35.251Z,1516401275.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:35.633Z,1516401275.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:35.647Z,1516401275.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:36.031Z,1516401276.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:36.051Z,1516401276.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:36.428Z,1516401276.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:36.442Z,1516401276.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:36.825Z,1516401276.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:36.840Z,1516401276.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:37.238Z,1516401277.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:37.259Z,1516401277.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:37.637Z,1516401277.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:37.652Z,1516401277.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:38.038Z,1516401278.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:38.052Z,1516401278.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:38.430Z,1516401278.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:38.444Z,1516401278.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:38.831Z,1516401278.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:38.846Z,1516401278.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:39.226Z,1516401279.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:39.240Z,1516401279.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:39.628Z,1516401279.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:39.642Z,1516401279.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:40.036Z,1516401280.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:40.058Z,1516401280.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:40.437Z,1516401280.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:40.463Z,1516401280.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:40.840Z,1516401280.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:40.854Z,1516401280.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:41.231Z,1516401281.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:41.250Z,1516401281.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:41.632Z,1516401281.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:41.647Z,1516401281.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:42.032Z,1516401282.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:42.052Z,1516401282.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:42.420Z,1516401282.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:42.447Z,1516401282.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:42.823Z,1516401282.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:42.850Z,1516401282.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:43.238Z,1516401283.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:43.253Z,1516401283.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:43.642Z,1516401283.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:43.656Z,1516401283.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:44.025Z,1516401284.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:44.060Z,1516401284.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:44.423Z,1516401284.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:44.449Z,1516401284.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:44.819Z,1516401284.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:44.844Z,1516401284.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:45.221Z,1516401285.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:45.251Z,1516401285.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:45.614Z,1516401285.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:45.636Z,1516401285.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:46.038Z,1516401286.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:46.053Z,1516401286.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:46.440Z,1516401286.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:46.458Z,1516401286.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:46.835Z,1516401286.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:46.857Z,1516401286.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:47.224Z,1516401287.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:47.249Z,1516401287.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:47.619Z,1516401287.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:47.652Z,1516401287.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:48.023Z,1516401288.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:48.049Z,1516401288.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:48.420Z,1516401288.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:48.458Z,1516401288.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:48.823Z,1516401288.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:48.857Z,1516401288.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:49.244Z,1516401289.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:49.259Z,1516401289.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:49.642Z,1516401289.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:49.667Z,1516401289.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:50.043Z,1516401290.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:50.058Z,1516401290.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:50.423Z,1516401290.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:50.455Z,1516401290.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:50.823Z,1516401290.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:50.854Z,1516401290.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:51.224Z,1516401291.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:51.255Z,1516401291.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:51.613Z,1516401291.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:51.627Z,1516401291.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:52.030Z,1516401292.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:52.055Z,1516401292.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:52.430Z,1516401292.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:52.463Z,1516401292.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:52.826Z,1516401292.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:52.852Z,1516401292.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:53.223Z,1516401293.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:53.259Z,1516401293.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:53.627Z,1516401293.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:53.641Z,1516401293.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:54.020Z,1516401294.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:54.034Z,1516401294.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:54.428Z,1516401294.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:54.442Z,1516401294.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:54.827Z,1516401294.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:54.841Z,1516401294.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:55.238Z,1516401295.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:55.268Z,1516401295.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:55.638Z,1516401295.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:55.652Z,1516401295.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:56.041Z,1516401296.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:56.055Z,1516401296.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:56.417Z,1516401296.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:56.437Z,1516401296.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:56.825Z,1516401296.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:56.844Z,1516401296.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:57.229Z,1516401297.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:57.250Z,1516401297.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:57.620Z,1516401297.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:57.638Z,1516401297.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:58.030Z,1516401298.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:58.044Z,1516401298.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:58.442Z,1516401298.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:58.475Z,1516401298.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:58.828Z,1516401298.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:58.843Z,1516401298.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:59.222Z,1516401299.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:59.251Z,1516401299.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:34:59.632Z,1516401299.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:34:59.647Z,1516401299.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:00.031Z,1516401300.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:00.045Z,1516401300.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:00.431Z,1516401300.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:00.445Z,1516401300.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:00.832Z,1516401300.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:00.846Z,1516401300.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:01.234Z,1516401301.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:01.249Z,1516401301.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:01.638Z,1516401301.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:01.652Z,1516401301.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:02.034Z,1516401302.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:02.049Z,1516401302.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:02.431Z,1516401302.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:02.446Z,1516401302.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:02.831Z,1516401302.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:02.845Z,1516401302.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:03.232Z,1516401303.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:03.247Z,1516401303.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:03.631Z,1516401303.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:03.645Z,1516401303.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:04.034Z,1516401304.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:04.048Z,1516401304.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:04.438Z,1516401304.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:04.452Z,1516401304.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:04.831Z,1516401304.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:04.851Z,1516401304.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:05.231Z,1516401305.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:05.245Z,1516401305.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:05.628Z,1516401305.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:05.642Z,1516401305.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:06.031Z,1516401306.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:06.045Z,1516401306.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:06.431Z,1516401306.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:06.445Z,1516401306.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:06.832Z,1516401306.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:06.847Z,1516401306.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:07.234Z,1516401307.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:07.249Z,1516401307.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:07.638Z,1516401307.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:07.652Z,1516401307.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:08.035Z,1516401308.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:08.049Z,1516401308.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:08.431Z,1516401308.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:08.445Z,1516401308.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:08.831Z,1516401308.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:08.845Z,1516401308.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:09.232Z,1516401309.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:09.246Z,1516401309.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:09.623Z,1516401309.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:09.637Z,1516401309.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:10.032Z,1516401310.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:10.059Z,1516401310.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:10.442Z,1516401310.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:10.456Z,1516401310.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:10.834Z,1516401310.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:10.848Z,1516401310.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:11.222Z,1516401311.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:11.244Z,1516401311.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:11.628Z,1516401311.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:11.643Z,1516401311.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:12.022Z,1516401312.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:12.044Z,1516401312.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:12.426Z,1516401312.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:12.446Z,1516401312.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:12.832Z,1516401312.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:12.851Z,1516401312.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:13.242Z,1516401313.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:13.256Z,1516401313.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:13.641Z,1516401313.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:13.655Z,1516401313.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:14.042Z,1516401314.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:14.063Z,1516401314.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:14.431Z,1516401314.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:14.450Z,1516401314.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:14.830Z,1516401314.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:14.844Z,1516401314.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:15.231Z,1516401315.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:15.245Z,1516401315.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:15.616Z,1516401315.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:15.642Z,1516401315.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:16.035Z,1516401316.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:16.061Z,1516401316.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:16.446Z,1516401316.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:16.461Z,1516401316.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:16.844Z,1516401316.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:16.858Z,1516401316.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:17.234Z,1516401317.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:17.248Z,1516401317.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:17.615Z,1516401317.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:17.649Z,1516401317.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:18.016Z,1516401318.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:18.051Z,1516401318.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:18.054Z,1516401318.054 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T22:35:18.054Z,1516401318.054 [Default:CheckIn:C.Wait] Stopped
2018-01-19T22:35:18.054Z,1516401318.054 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T22:35:18.054Z,1516401318.054 [Default:CheckIn:D] Running Loop=1
2018-01-19T22:35:18.424Z,1516401318.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:18.459Z,1516401318.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:18.462Z,1516401318.462 [Default:CheckIn:D] Stopped
2018-01-19T22:35:18.462Z,1516401318.462 [Default:CheckIn:E] Running Loop=1
2018-01-19T22:35:18.816Z,1516401318.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:18.853Z,1516401318.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:18.856Z,1516401318.856 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 82.507275 min 
2018-01-19T22:35:18.857Z,1516401318.857 [Default:CheckIn:E] Stopped
2018-01-19T22:35:18.857Z,1516401318.857 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T22:35:18.857Z,1516401318.857 [Default:CheckIn] Stopped
2018-01-19T22:35:18.857Z,1516401318.857 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T22:35:18.857Z,1516401318.857 [Default:CheckIn](INFO): Running loop #9
2018-01-19T22:35:18.857Z,1516401318.857 [Default:CheckIn] Running Loop=9
2018-01-19T22:35:18.857Z,1516401318.857 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T22:35:18.858Z,1516401318.858 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T22:35:21.922Z,1516401321.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:21.944Z,1516401321.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:22.058Z,1516401322.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:22.074Z,1516401322.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:22.435Z,1516401322.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:22.449Z,1516401322.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:22.799Z,1516401322.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:22.817Z,1516401322.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:23.204Z,1516401323.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:23.223Z,1516401323.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:23.605Z,1516401323.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:23.618Z,1516401323.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:24.003Z,1516401324.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:24.017Z,1516401324.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:24.414Z,1516401324.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:24.428Z,1516401324.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:24.809Z,1516401324.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:24.823Z,1516401324.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:25.207Z,1516401325.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:25.221Z,1516401325.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:25.603Z,1516401325.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:25.618Z,1516401325.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:26.007Z,1516401326.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:26.021Z,1516401326.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:26.412Z,1516401326.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:26.426Z,1516401326.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:26.808Z,1516401326.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:26.824Z,1516401326.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:27.205Z,1516401327.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:27.219Z,1516401327.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:27.598Z,1516401327.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:27.613Z,1516401327.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:28.007Z,1516401328.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:28.021Z,1516401328.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:28.409Z,1516401328.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:28.423Z,1516401328.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:28.806Z,1516401328.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:28.820Z,1516401328.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:29.203Z,1516401329.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:29.223Z,1516401329.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:29.605Z,1516401329.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:29.619Z,1516401329.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:30.008Z,1516401330.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:30.022Z,1516401330.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:30.410Z,1516401330.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:30.424Z,1516401330.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:30.806Z,1516401330.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:30.826Z,1516401330.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:31.204Z,1516401331.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:31.219Z,1516401331.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:31.600Z,1516401331.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:31.618Z,1516401331.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:32.008Z,1516401332.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:32.022Z,1516401332.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:32.406Z,1516401332.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:32.420Z,1516401332.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:32.807Z,1516401332.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:32.822Z,1516401332.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:33.200Z,1516401333.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:33.214Z,1516401333.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:33.604Z,1516401333.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:33.623Z,1516401333.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:34.008Z,1516401334.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:34.027Z,1516401334.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:34.412Z,1516401334.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:34.426Z,1516401334.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:34.810Z,1516401334.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:34.831Z,1516401334.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:35.202Z,1516401335.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:35.223Z,1516401335.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:35.606Z,1516401335.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:35.620Z,1516401335.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:36.010Z,1516401336.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:36.031Z,1516401336.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:36.412Z,1516401336.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:36.426Z,1516401336.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:36.809Z,1516401336.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:36.823Z,1516401336.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:37.201Z,1516401337.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:37.220Z,1516401337.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:37.597Z,1516401337.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:37.635Z,1516401337.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:38.011Z,1516401338.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:38.018Z,1516401338.018 [PNI_TCM](ERROR): CRC does not match. Expected:0x64419 got:0x49306
2018-01-19T22:35:38.053Z,1516401338.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:38.411Z,1516401338.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:38.426Z,1516401338.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:38.810Z,1516401338.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:38.824Z,1516401338.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:39.197Z,1516401339.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:39.230Z,1516401339.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:39.602Z,1516401339.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:39.619Z,1516401339.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:40.011Z,1516401340.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:40.031Z,1516401340.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:40.411Z,1516401340.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:40.425Z,1516401340.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:40.809Z,1516401340.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:40.848Z,1516401340.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:41.205Z,1516401341.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:41.214Z,1516401341.214 [PNI_TCM](ERROR): CRC does not match. Expected:0x38375 got:0x49483
2018-01-19T22:35:41.252Z,1516401341.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:41.606Z,1516401341.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:41.620Z,1516401341.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:42.012Z,1516401342.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:42.031Z,1516401342.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:42.410Z,1516401342.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:42.448Z,1516401342.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:42.811Z,1516401342.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:42.819Z,1516401342.819 [PNI_TCM](ERROR): CRC does not match. Expected:0x46950 got:0x6593
2018-01-19T22:35:42.855Z,1516401342.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:43.206Z,1516401343.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:43.221Z,1516401343.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:43.607Z,1516401343.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:43.627Z,1516401343.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:44.009Z,1516401344.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:44.049Z,1516401344.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:44.408Z,1516401344.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:44.425Z,1516401344.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:44.811Z,1516401344.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:44.825Z,1516401344.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:45.188Z,1516401345.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:45.223Z,1516401345.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:45.603Z,1516401345.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:45.635Z,1516401345.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:46.014Z,1516401346.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:46.030Z,1516401346.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:46.416Z,1516401346.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:46.430Z,1516401346.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:46.816Z,1516401346.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:46.835Z,1516401346.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:47.204Z,1516401347.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:47.250Z,1516401347.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:47.605Z,1516401347.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:47.624Z,1516401347.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:48.015Z,1516401348.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:48.035Z,1516401348.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:48.415Z,1516401348.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:48.435Z,1516401348.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:48.815Z,1516401348.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:48.851Z,1516401348.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:49.202Z,1516401349.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:49.217Z,1516401349.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:49.604Z,1516401349.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:49.622Z,1516401349.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:50.017Z,1516401350.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:50.031Z,1516401350.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:50.413Z,1516401350.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:50.454Z,1516401350.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:50.814Z,1516401350.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:50.835Z,1516401350.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:51.206Z,1516401351.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:51.224Z,1516401351.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:51.585Z,1516401351.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:51.617Z,1516401351.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:52.011Z,1516401352.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:52.025Z,1516401352.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:52.410Z,1516401352.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:52.430Z,1516401352.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:52.806Z,1516401352.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:52.836Z,1516401352.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:53.196Z,1516401353.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:53.226Z,1516401353.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:53.588Z,1516401353.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:53.619Z,1516401353.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:54.018Z,1516401354.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:54.037Z,1516401354.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:54.415Z,1516401354.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:54.432Z,1516401354.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:54.818Z,1516401354.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:54.832Z,1516401354.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:55.207Z,1516401355.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:55.243Z,1516401355.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:55.595Z,1516401355.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:55.620Z,1516401355.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:56.012Z,1516401356.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:56.030Z,1516401356.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:56.421Z,1516401356.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:56.435Z,1516401356.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:56.814Z,1516401356.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:56.863Z,1516401356.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:57.196Z,1516401357.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:57.223Z,1516401357.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:57.585Z,1516401357.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:57.607Z,1516401357.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:58.011Z,1516401358.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:58.029Z,1516401358.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:58.411Z,1516401358.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:58.435Z,1516401358.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:58.798Z,1516401358.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:58.831Z,1516401358.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:59.196Z,1516401359.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:59.222Z,1516401359.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:35:59.591Z,1516401359.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:35:59.627Z,1516401359.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:00.014Z,1516401360.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:00.028Z,1516401360.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:00.411Z,1516401360.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:00.431Z,1516401360.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:00.812Z,1516401360.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:00.834Z,1516401360.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:01.195Z,1516401361.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:01.225Z,1516401361.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:01.593Z,1516401361.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:01.635Z,1516401361.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:01.992Z,1516401361.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:02.023Z,1516401362.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:02.415Z,1516401362.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:02.432Z,1516401362.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:02.814Z,1516401362.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:02.832Z,1516401362.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:03.198Z,1516401363.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:03.232Z,1516401363.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:03.587Z,1516401363.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:03.619Z,1516401363.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:03.995Z,1516401363.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:04.026Z,1516401364.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:04.388Z,1516401364.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:04.434Z,1516401364.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:04.785Z,1516401364.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:04.799Z,1516401364.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:05.202Z,1516401365.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:05.228Z,1516401365.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:05.606Z,1516401365.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:05.636Z,1516401365.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:06.006Z,1516401366.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:06.036Z,1516401366.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:06.395Z,1516401366.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:06.431Z,1516401366.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:06.791Z,1516401366.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:06.805Z,1516401366.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:07.192Z,1516401367.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:07.206Z,1516401367.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:07.597Z,1516401367.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:07.611Z,1516401367.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:07.999Z,1516401367.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:08.013Z,1516401368.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:08.398Z,1516401368.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:08.413Z,1516401368.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:08.814Z,1516401368.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:08.847Z,1516401368.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:09.214Z,1516401369.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:09.254Z,1516401369.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:09.588Z,1516401369.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:09.614Z,1516401369.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:10.003Z,1516401370.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:10.023Z,1516401370.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:10.404Z,1516401370.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:10.417Z,1516401370.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:10.797Z,1516401370.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:10.811Z,1516401370.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:11.205Z,1516401371.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:11.219Z,1516401371.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:11.605Z,1516401371.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:11.619Z,1516401371.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:12.005Z,1516401372.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:12.020Z,1516401372.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:12.399Z,1516401372.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:12.419Z,1516401372.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:12.796Z,1516401372.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:12.810Z,1516401372.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:13.196Z,1516401373.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:13.210Z,1516401373.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:13.598Z,1516401373.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:13.616Z,1516401373.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:13.993Z,1516401373.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:14.019Z,1516401374.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:14.405Z,1516401374.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:14.419Z,1516401374.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:14.806Z,1516401374.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:14.820Z,1516401374.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:15.205Z,1516401375.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:15.219Z,1516401375.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:15.590Z,1516401375.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:15.612Z,1516401375.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:15.995Z,1516401375.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:16.018Z,1516401376.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:16.405Z,1516401376.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:16.418Z,1516401376.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:16.797Z,1516401376.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:16.811Z,1516401376.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:17.209Z,1516401377.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:17.223Z,1516401377.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:17.609Z,1516401377.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:17.623Z,1516401377.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:18.003Z,1516401378.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:18.029Z,1516401378.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:18.398Z,1516401378.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:18.419Z,1516401378.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:18.792Z,1516401378.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:18.826Z,1516401378.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:19.188Z,1516401379.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:19.214Z,1516401379.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:22.302Z,1516401382.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:22.316Z,1516401382.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:22.415Z,1516401382.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:22.461Z,1516401382.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:22.778Z,1516401382.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:22.809Z,1516401382.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:23.182Z,1516401383.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:23.209Z,1516401383.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:23.582Z,1516401383.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:23.596Z,1516401383.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:23.980Z,1516401383.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:23.999Z,1516401383.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:24.368Z,1516401384.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:24.388Z,1516401384.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:24.776Z,1516401384.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:24.791Z,1516401384.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:25.150Z,1516401385.150 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T22:36:25.150Z,1516401385.150 [NAL9602] Data Fault, FailCount= 3
2018-01-19T22:36:25.150Z,1516401385.150 [NAL9602](ERROR): Data Fault
2018-01-19T22:36:25.178Z,1516401385.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:25.205Z,1516401385.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:25.230Z,1516401385.230 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T22:36:25.542Z,1516401385.542 [NAL9602](INFO): Powering down
2018-01-19T22:36:25.560Z,1516401385.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:25.596Z,1516401385.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:25.976Z,1516401385.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:25.990Z,1516401385.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:26.363Z,1516401386.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:26.390Z,1516401386.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:26.402Z,1516401386.402 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T22:36:26.402Z,1516401386.402 [NAL9602] No Fault, FailCount= 3
2018-01-19T22:36:26.760Z,1516401386.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:26.787Z,1516401386.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:27.159Z,1516401387.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:27.191Z,1516401387.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:27.566Z,1516401387.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:27.592Z,1516401387.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:27.957Z,1516401387.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:27.983Z,1516401387.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:28.363Z,1516401388.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:28.397Z,1516401388.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:28.767Z,1516401388.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:28.799Z,1516401388.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:29.157Z,1516401389.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:29.171Z,1516401389.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:29.558Z,1516401389.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:29.573Z,1516401389.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:29.971Z,1516401389.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:30.003Z,1516401390.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:30.367Z,1516401390.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:30.406Z,1516401390.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:30.767Z,1516401390.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:30.798Z,1516401390.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:31.166Z,1516401391.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:31.181Z,1516401391.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:31.560Z,1516401391.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:31.574Z,1516401391.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:31.963Z,1516401391.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:31.977Z,1516401391.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:32.367Z,1516401392.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:32.381Z,1516401392.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:32.760Z,1516401392.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:32.773Z,1516401392.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:33.171Z,1516401393.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:33.185Z,1516401393.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:33.570Z,1516401393.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:33.584Z,1516401393.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:33.963Z,1516401393.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:33.977Z,1516401393.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:34.363Z,1516401394.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:34.386Z,1516401394.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:34.772Z,1516401394.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:34.786Z,1516401394.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:35.164Z,1516401395.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:35.178Z,1516401395.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:35.566Z,1516401395.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:35.580Z,1516401395.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:35.970Z,1516401395.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:35.983Z,1516401395.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:36.372Z,1516401396.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:36.386Z,1516401396.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:36.767Z,1516401396.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:36.782Z,1516401396.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:37.168Z,1516401397.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:37.182Z,1516401397.182 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:37.182Z,1516401397.182 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-01-19T22:36:37.182Z,1516401397.182 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:36:37.184Z,1516401397.184 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:37.184Z,1516401397.184 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-01-19T22:36:37.184Z,1516401397.184 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:36:37.186Z,1516401397.186 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:37.186Z,1516401397.186 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2018-01-19T22:36:37.186Z,1516401397.186 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:36:37.217Z,1516401397.217 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:36:37.218Z,1516401397.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:36:37.218Z,1516401397.218 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:36:37.571Z,1516401397.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:37.594Z,1516401397.594 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:36:37.595Z,1516401397.595 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-01-19T22:36:37.595Z,1516401397.595 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:36:37.595Z,1516401397.595 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-01-19T22:36:37.596Z,1516401397.596 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:36:37.596Z,1516401397.596 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2018-01-19T22:36:37.968Z,1516401397.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:37.981Z,1516401397.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:36:37.981Z,1516401397.981 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:36:37.982Z,1516401397.982 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:36:37.982Z,1516401397.982 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:36:37.982Z,1516401397.982 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:36:37.983Z,1516401397.983 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:36:37.983Z,1516401397.983 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:36:37.983Z,1516401397.983 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:36:37.984Z,1516401397.984 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:36:38.371Z,1516401398.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:38.385Z,1516401398.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:36:38.386Z,1516401398.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:38.772Z,1516401398.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:38.785Z,1516401398.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:36:38.786Z,1516401398.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:39.168Z,1516401399.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:39.182Z,1516401399.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:36:39.183Z,1516401399.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:39.572Z,1516401399.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:39.585Z,1516401399.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:36:39.586Z,1516401399.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:39.964Z,1516401399.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:39.983Z,1516401399.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:36:39.984Z,1516401399.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:40.374Z,1516401400.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:40.388Z,1516401400.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:36:40.389Z,1516401400.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:40.770Z,1516401400.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:40.796Z,1516401400.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T22:36:40.797Z,1516401400.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:41.164Z,1516401401.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:41.178Z,1516401401.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T22:36:41.179Z,1516401401.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:41.566Z,1516401401.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:41.581Z,1516401401.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T22:36:41.582Z,1516401401.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:41.970Z,1516401401.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:41.984Z,1516401401.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T22:36:41.985Z,1516401401.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:42.374Z,1516401402.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:42.388Z,1516401402.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T22:36:42.389Z,1516401402.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:42.774Z,1516401402.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:42.788Z,1516401402.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T22:36:42.788Z,1516401402.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:43.180Z,1516401403.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:43.194Z,1516401403.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T22:36:43.195Z,1516401403.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:43.556Z,1516401403.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:43.589Z,1516401403.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T22:36:43.590Z,1516401403.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:43.975Z,1516401403.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:43.988Z,1516401403.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:36:43.989Z,1516401403.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:44.370Z,1516401404.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:44.384Z,1516401404.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:36:44.385Z,1516401404.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:44.756Z,1516401404.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:44.789Z,1516401404.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:36:44.790Z,1516401404.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:45.175Z,1516401405.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:45.188Z,1516401405.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:36:45.190Z,1516401405.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:45.570Z,1516401405.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:45.584Z,1516401405.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:36:45.585Z,1516401405.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:45.968Z,1516401405.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:45.982Z,1516401405.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:36:45.982Z,1516401405.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:46.374Z,1516401406.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:46.388Z,1516401406.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:36:46.389Z,1516401406.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:46.770Z,1516401406.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:46.784Z,1516401406.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T22:36:46.785Z,1516401406.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:47.166Z,1516401407.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:47.180Z,1516401407.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:36:47.181Z,1516401407.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:47.570Z,1516401407.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:47.584Z,1516401407.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:36:47.585Z,1516401407.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:47.982Z,1516401407.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:47.996Z,1516401407.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:36:47.997Z,1516401407.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:48.371Z,1516401408.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:48.384Z,1516401408.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:36:48.385Z,1516401408.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:48.775Z,1516401408.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:48.789Z,1516401408.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:36:48.790Z,1516401408.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:49.174Z,1516401409.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:49.187Z,1516401409.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T22:36:49.188Z,1516401409.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:49.568Z,1516401409.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:49.581Z,1516401409.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T22:36:49.582Z,1516401409.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:49.971Z,1516401409.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:49.985Z,1516401409.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T22:36:49.986Z,1516401409.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:50.366Z,1516401410.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:50.387Z,1516401410.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T22:36:50.388Z,1516401410.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:50.768Z,1516401410.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:50.781Z,1516401410.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T22:36:50.782Z,1516401410.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:51.171Z,1516401411.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:51.185Z,1516401411.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T22:36:51.186Z,1516401411.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:51.566Z,1516401411.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:51.587Z,1516401411.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T22:36:51.588Z,1516401411.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:51.957Z,1516401411.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:51.990Z,1516401411.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:36:51.991Z,1516401411.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:52.375Z,1516401412.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:52.389Z,1516401412.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:36:52.390Z,1516401412.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:52.775Z,1516401412.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:52.789Z,1516401412.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T22:36:52.789Z,1516401412.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:53.168Z,1516401413.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:53.181Z,1516401413.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T22:36:53.182Z,1516401413.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:53.575Z,1516401413.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:53.589Z,1516401413.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T22:36:53.590Z,1516401413.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:53.966Z,1516401413.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:53.987Z,1516401413.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T22:36:53.988Z,1516401413.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:54.366Z,1516401414.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:54.386Z,1516401414.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T22:36:54.387Z,1516401414.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:54.770Z,1516401414.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:54.784Z,1516401414.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T22:36:54.785Z,1516401414.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:55.171Z,1516401415.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:55.184Z,1516401415.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T22:36:55.186Z,1516401415.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:55.567Z,1516401415.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:55.580Z,1516401415.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T22:36:55.581Z,1516401415.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:55.946Z,1516401415.946 [NAL9602](INFO): Powering up NAL9602
2018-01-19T22:36:55.970Z,1516401415.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:55.993Z,1516401415.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T22:36:55.994Z,1516401415.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:56.371Z,1516401416.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:56.384Z,1516401416.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T22:36:56.386Z,1516401416.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:56.766Z,1516401416.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:56.786Z,1516401416.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T22:36:56.787Z,1516401416.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:57.175Z,1516401417.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:57.189Z,1516401417.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:57.566Z,1516401417.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:57.587Z,1516401417.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:57.966Z,1516401417.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:57.991Z,1516401417.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:58.375Z,1516401418.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:58.389Z,1516401418.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:58.771Z,1516401418.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:58.785Z,1516401418.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:59.166Z,1516401419.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:59.181Z,1516401419.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:59.575Z,1516401419.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:59.589Z,1516401419.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:36:59.965Z,1516401419.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:36:59.996Z,1516401419.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:00.375Z,1516401420.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:00.389Z,1516401420.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:00.775Z,1516401420.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:00.790Z,1516401420.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:01.170Z,1516401421.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:01.184Z,1516401421.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:01.568Z,1516401421.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:01.586Z,1516401421.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:01.975Z,1516401421.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:01.990Z,1516401421.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:02.366Z,1516401422.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:02.388Z,1516401422.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:02.772Z,1516401422.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:02.786Z,1516401422.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:03.168Z,1516401423.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:03.192Z,1516401423.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:03.576Z,1516401423.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:03.595Z,1516401423.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:03.977Z,1516401423.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:03.991Z,1516401423.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:04.376Z,1516401424.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:04.391Z,1516401424.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:04.770Z,1516401424.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:04.791Z,1516401424.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:05.172Z,1516401425.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:05.186Z,1516401425.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:05.561Z,1516401425.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:05.592Z,1516401425.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:05.976Z,1516401425.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:05.991Z,1516401425.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:06.378Z,1516401426.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:06.398Z,1516401426.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:06.750Z,1516401426.750 [NAL9602](INFO): NAL9602 initialized
2018-01-19T22:37:06.780Z,1516401426.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:06.795Z,1516401426.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:07.172Z,1516401427.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:07.186Z,1516401427.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:07.578Z,1516401427.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:07.598Z,1516401427.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:07.982Z,1516401427.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:07.996Z,1516401427.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:08.381Z,1516401428.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:08.396Z,1516401428.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:08.769Z,1516401428.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:08.782Z,1516401428.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:09.169Z,1516401429.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:09.191Z,1516401429.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:09.576Z,1516401429.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:09.590Z,1516401429.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:09.968Z,1516401429.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:09.986Z,1516401429.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:10.380Z,1516401430.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:10.395Z,1516401430.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:10.782Z,1516401430.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:10.796Z,1516401430.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:11.179Z,1516401431.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:11.192Z,1516401431.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:11.566Z,1516401431.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:11.585Z,1516401431.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:11.966Z,1516401431.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:11.988Z,1516401431.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:12.378Z,1516401432.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:12.392Z,1516401432.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:12.781Z,1516401432.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:12.795Z,1516401432.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:13.180Z,1516401433.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:13.199Z,1516401433.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:13.576Z,1516401433.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:13.590Z,1516401433.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:13.969Z,1516401433.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:13.983Z,1516401433.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:14.382Z,1516401434.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:14.396Z,1516401434.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:14.782Z,1516401434.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:14.796Z,1516401434.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:15.181Z,1516401435.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:15.195Z,1516401435.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:15.570Z,1516401435.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:15.589Z,1516401435.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:15.972Z,1516401435.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:15.986Z,1516401435.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:16.386Z,1516401436.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:16.400Z,1516401436.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:16.785Z,1516401436.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:16.799Z,1516401436.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:17.178Z,1516401437.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:17.192Z,1516401437.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:17.572Z,1516401437.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:17.591Z,1516401437.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:17.972Z,1516401437.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:17.991Z,1516401437.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:18.378Z,1516401438.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:18.403Z,1516401438.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:18.782Z,1516401438.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:18.797Z,1516401438.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:19.182Z,1516401439.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:19.196Z,1516401439.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:19.574Z,1516401439.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:19.588Z,1516401439.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:22.683Z,1516401442.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:22.698Z,1516401442.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:22.815Z,1516401442.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:22.859Z,1516401442.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:23.175Z,1516401443.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:23.190Z,1516401443.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:23.562Z,1516401443.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:23.586Z,1516401443.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:23.945Z,1516401443.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:23.959Z,1516401443.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:24.351Z,1516401444.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:24.384Z,1516401444.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:24.752Z,1516401444.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:24.788Z,1516401444.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:25.145Z,1516401445.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:25.159Z,1516401445.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:25.562Z,1516401445.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:25.591Z,1516401445.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:25.973Z,1516401445.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:25.994Z,1516401445.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:26.362Z,1516401446.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:26.391Z,1516401446.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:26.751Z,1516401446.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:26.784Z,1516401446.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:27.151Z,1516401447.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:27.185Z,1516401447.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:27.545Z,1516401447.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:27.559Z,1516401447.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:27.952Z,1516401447.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:27.983Z,1516401447.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:28.351Z,1516401448.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:28.365Z,1516401448.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:28.758Z,1516401448.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:28.789Z,1516401448.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:29.162Z,1516401449.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:29.183Z,1516401449.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:29.561Z,1516401449.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:29.590Z,1516401449.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:29.945Z,1516401449.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:29.959Z,1516401449.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:30.351Z,1516401450.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:30.387Z,1516401450.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:30.752Z,1516401450.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:30.766Z,1516401450.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:31.151Z,1516401451.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:31.171Z,1516401451.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:31.562Z,1516401451.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:31.576Z,1516401451.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:31.966Z,1516401451.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:31.999Z,1516401451.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:32.366Z,1516401452.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:32.380Z,1516401452.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:32.752Z,1516401452.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:32.771Z,1516401452.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:33.152Z,1516401453.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:33.166Z,1516401453.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:33.549Z,1516401453.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:33.572Z,1516401453.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:33.955Z,1516401453.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:33.975Z,1516401453.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:34.355Z,1516401454.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:34.369Z,1516401454.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:34.758Z,1516401454.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:34.772Z,1516401454.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:35.162Z,1516401455.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:35.176Z,1516401455.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:35.559Z,1516401455.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:35.578Z,1516401455.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:35.956Z,1516401455.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:35.970Z,1516401455.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:36.351Z,1516401456.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:36.366Z,1516401456.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:36.750Z,1516401456.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:36.764Z,1516401456.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:37.156Z,1516401457.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:37.170Z,1516401457.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:37.557Z,1516401457.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:37.571Z,1516401457.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:37.959Z,1516401457.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:37.973Z,1516401457.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:38.358Z,1516401458.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:38.372Z,1516401458.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:38.756Z,1516401458.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:38.770Z,1516401458.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:39.146Z,1516401459.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:39.176Z,1516401459.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:39.545Z,1516401459.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:39.567Z,1516401459.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:39.950Z,1516401459.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:39.974Z,1516401459.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:40.357Z,1516401460.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:40.371Z,1516401460.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:40.762Z,1516401460.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:40.776Z,1516401460.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:41.171Z,1516401461.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:41.185Z,1516401461.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:41.566Z,1516401461.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:41.580Z,1516401461.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:41.949Z,1516401461.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:41.969Z,1516401461.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:42.346Z,1516401462.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:42.369Z,1516401462.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:42.752Z,1516401462.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:42.767Z,1516401462.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:43.149Z,1516401463.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:43.167Z,1516401463.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:43.561Z,1516401463.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:43.576Z,1516401463.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:43.962Z,1516401463.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:43.977Z,1516401463.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:44.361Z,1516401464.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:44.376Z,1516401464.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:44.746Z,1516401464.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:44.768Z,1516401464.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:45.139Z,1516401465.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:45.170Z,1516401465.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:45.537Z,1516401465.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:45.570Z,1516401465.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:45.956Z,1516401465.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:45.986Z,1516401465.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:46.356Z,1516401466.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:46.370Z,1516401466.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:46.762Z,1516401466.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:46.776Z,1516401466.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:47.166Z,1516401467.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:47.180Z,1516401467.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:47.567Z,1516401467.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:47.580Z,1516401467.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:47.941Z,1516401467.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:47.968Z,1516401467.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:48.347Z,1516401468.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:48.372Z,1516401468.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:48.740Z,1516401468.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:48.771Z,1516401468.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:49.141Z,1516401469.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:49.167Z,1516401469.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:49.566Z,1516401469.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:49.580Z,1516401469.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:49.963Z,1516401469.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:49.977Z,1516401469.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:50.366Z,1516401470.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:50.380Z,1516401470.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:50.743Z,1516401470.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:50.778Z,1516401470.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:51.143Z,1516401471.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:51.175Z,1516401471.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:51.542Z,1516401471.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:51.568Z,1516401471.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:51.946Z,1516401471.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:51.984Z,1516401471.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:52.348Z,1516401472.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:52.379Z,1516401472.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:52.750Z,1516401472.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:52.784Z,1516401472.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:53.170Z,1516401473.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:53.184Z,1516401473.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:53.550Z,1516401473.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:53.583Z,1516401473.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:53.937Z,1516401473.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:53.952Z,1516401473.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:54.347Z,1516401474.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:54.382Z,1516401474.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:54.748Z,1516401474.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:54.786Z,1516401474.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:55.137Z,1516401475.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:55.151Z,1516401475.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:55.558Z,1516401475.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:55.591Z,1516401475.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:55.958Z,1516401475.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:55.985Z,1516401475.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:56.358Z,1516401476.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:56.384Z,1516401476.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:56.743Z,1516401476.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:56.779Z,1516401476.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:57.151Z,1516401477.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:57.190Z,1516401477.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:57.539Z,1516401477.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:57.565Z,1516401477.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:57.960Z,1516401477.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:57.975Z,1516401477.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:58.352Z,1516401478.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:58.366Z,1516401478.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:58.754Z,1516401478.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:58.768Z,1516401478.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:59.166Z,1516401479.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:59.180Z,1516401479.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:59.558Z,1516401479.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:59.578Z,1516401479.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:37:59.945Z,1516401479.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:37:59.959Z,1516401479.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:00.351Z,1516401480.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:00.365Z,1516401480.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:00.752Z,1516401480.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:00.766Z,1516401480.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:01.149Z,1516401481.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:01.163Z,1516401481.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:01.556Z,1516401481.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:01.575Z,1516401481.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:01.962Z,1516401481.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:01.982Z,1516401481.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:02.356Z,1516401482.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:02.375Z,1516401482.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:02.755Z,1516401482.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:02.769Z,1516401482.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:03.145Z,1516401483.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:03.171Z,1516401483.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:03.555Z,1516401483.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:03.569Z,1516401483.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:03.961Z,1516401483.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:03.975Z,1516401483.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:04.356Z,1516401484.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:04.370Z,1516401484.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:04.761Z,1516401484.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:04.776Z,1516401484.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:05.162Z,1516401485.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:05.176Z,1516401485.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:05.561Z,1516401485.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:05.575Z,1516401485.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:05.941Z,1516401485.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:05.972Z,1516401485.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:06.355Z,1516401486.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:06.375Z,1516401486.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:06.740Z,1516401486.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:06.770Z,1516401486.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:07.137Z,1516401487.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:07.164Z,1516401487.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:07.566Z,1516401487.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:07.580Z,1516401487.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:07.970Z,1516401487.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:07.990Z,1516401487.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:08.362Z,1516401488.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:08.376Z,1516401488.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:08.743Z,1516401488.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:08.768Z,1516401488.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:09.139Z,1516401489.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:09.175Z,1516401489.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:09.537Z,1516401489.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:09.563Z,1516401489.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:09.948Z,1516401489.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:09.973Z,1516401489.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:10.339Z,1516401490.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:10.375Z,1516401490.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:10.750Z,1516401490.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:10.782Z,1516401490.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:11.170Z,1516401491.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:11.184Z,1516401491.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:11.549Z,1516401491.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:11.575Z,1516401491.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:11.941Z,1516401491.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:11.964Z,1516401491.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:12.343Z,1516401492.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:12.378Z,1516401492.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:12.748Z,1516401492.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:12.779Z,1516401492.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:13.177Z,1516401493.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:13.215Z,1516401493.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:13.566Z,1516401493.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:13.581Z,1516401493.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:13.967Z,1516401493.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:13.986Z,1516401493.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:14.367Z,1516401494.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:14.382Z,1516401494.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:14.744Z,1516401494.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:14.774Z,1516401494.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:15.148Z,1516401495.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:15.186Z,1516401495.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:15.538Z,1516401495.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:15.552Z,1516401495.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:15.953Z,1516401495.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:15.980Z,1516401495.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:16.349Z,1516401496.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:16.375Z,1516401496.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:16.759Z,1516401496.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:16.789Z,1516401496.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:17.176Z,1516401497.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:17.190Z,1516401497.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:17.550Z,1516401497.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:17.594Z,1516401497.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:17.940Z,1516401497.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:17.955Z,1516401497.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:18.344Z,1516401498.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:18.371Z,1516401498.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:18.740Z,1516401498.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:18.786Z,1516401498.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:19.140Z,1516401499.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:19.159Z,1516401499.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:19.574Z,1516401499.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:19.589Z,1516401499.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:19.971Z,1516401499.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:19.990Z,1516401499.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:23.114Z,1516401503.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:23.131Z,1516401503.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:23.229Z,1516401503.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:23.272Z,1516401503.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:23.587Z,1516401503.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:23.623Z,1516401503.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:23.988Z,1516401503.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:24.003Z,1516401504.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:24.380Z,1516401504.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:24.394Z,1516401504.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:24.798Z,1516401504.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:24.823Z,1516401504.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:25.202Z,1516401505.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:25.226Z,1516401505.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:25.586Z,1516401505.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:25.600Z,1516401505.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:25.987Z,1516401505.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:26.027Z,1516401506.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:26.387Z,1516401506.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:26.401Z,1516401506.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:26.781Z,1516401506.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:26.795Z,1516401506.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:27.190Z,1516401507.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:27.227Z,1516401507.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:27.590Z,1516401507.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:27.604Z,1516401507.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:28.002Z,1516401508.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:28.025Z,1516401508.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:28.402Z,1516401508.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:28.425Z,1516401508.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:28.784Z,1516401508.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:28.803Z,1516401508.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:29.181Z,1516401509.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:29.208Z,1516401509.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:29.591Z,1516401509.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:29.605Z,1516401509.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:29.984Z,1516401509.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:29.998Z,1516401509.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:30.391Z,1516401510.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:30.406Z,1516401510.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:30.793Z,1516401510.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:30.807Z,1516401510.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:31.198Z,1516401511.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:31.212Z,1516401511.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:31.590Z,1516401511.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:31.612Z,1516401511.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:31.992Z,1516401511.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:32.006Z,1516401512.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:32.388Z,1516401512.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:32.402Z,1516401512.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:32.792Z,1516401512.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:32.807Z,1516401512.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:33.186Z,1516401513.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:33.205Z,1516401513.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:33.598Z,1516401513.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:33.618Z,1516401513.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:33.997Z,1516401513.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:34.011Z,1516401514.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:34.406Z,1516401514.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:34.424Z,1516401514.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:34.792Z,1516401514.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:34.807Z,1516401514.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:35.185Z,1516401515.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:35.206Z,1516401515.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:35.586Z,1516401515.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:35.604Z,1516401515.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:35.988Z,1516401515.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:36.003Z,1516401516.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:36.391Z,1516401516.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:36.407Z,1516401516.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:36.797Z,1516401516.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:36.819Z,1516401516.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:37.201Z,1516401517.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:37.215Z,1516401517.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:37.593Z,1516401517.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:37.607Z,1516401517.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:37.982Z,1516401517.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:38.004Z,1516401518.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:38.375Z,1516401518.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:38.410Z,1516401518.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:38.792Z,1516401518.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:38.807Z,1516401518.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:39.182Z,1516401519.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:39.204Z,1516401519.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:39.594Z,1516401519.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:39.609Z,1516401519.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:39.997Z,1516401519.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:40.012Z,1516401520.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:40.398Z,1516401520.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:40.419Z,1516401520.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:40.791Z,1516401520.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:40.805Z,1516401520.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:41.185Z,1516401521.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:41.202Z,1516401521.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:41.582Z,1516401521.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:41.603Z,1516401521.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:41.976Z,1516401521.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:42.010Z,1516401522.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:42.391Z,1516401522.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:42.405Z,1516401522.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:42.797Z,1516401522.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:42.819Z,1516401522.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:43.198Z,1516401523.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:43.212Z,1516401523.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:43.597Z,1516401523.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:43.611Z,1516401523.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:43.991Z,1516401523.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:44.007Z,1516401524.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:44.375Z,1516401524.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:44.402Z,1516401524.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:44.792Z,1516401524.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:44.807Z,1516401524.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:45.182Z,1516401525.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:45.204Z,1516401525.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:45.599Z,1516401525.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:45.613Z,1516401525.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:46.000Z,1516401526.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:46.023Z,1516401526.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:46.401Z,1516401526.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:46.415Z,1516401526.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:46.791Z,1516401526.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:46.805Z,1516401526.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:47.185Z,1516401527.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:47.203Z,1516401527.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:47.582Z,1516401527.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:47.604Z,1516401527.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:47.988Z,1516401527.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:48.007Z,1516401528.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:48.391Z,1516401528.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:48.405Z,1516401528.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:48.798Z,1516401528.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:48.819Z,1516401528.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:49.201Z,1516401529.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:49.215Z,1516401529.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:49.598Z,1516401529.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:49.619Z,1516401529.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:49.991Z,1516401529.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:50.005Z,1516401530.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:50.386Z,1516401530.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:50.449Z,1516401530.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:50.786Z,1516401530.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:50.813Z,1516401530.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:51.181Z,1516401531.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:51.210Z,1516401531.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:51.601Z,1516401531.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:51.659Z,1516401531.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:52.004Z,1516401532.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:52.039Z,1516401532.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:52.400Z,1516401532.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:52.419Z,1516401532.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:52.785Z,1516401532.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:52.835Z,1516401532.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:53.181Z,1516401533.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:53.220Z,1516401533.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:53.585Z,1516401533.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:53.600Z,1516401533.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:53.994Z,1516401533.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:54.066Z,1516401534.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:54.385Z,1516401534.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:54.428Z,1516401534.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:54.794Z,1516401534.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:54.839Z,1516401534.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:55.196Z,1516401535.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:55.214Z,1516401535.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:55.597Z,1516401535.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:55.632Z,1516401535.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:55.988Z,1516401535.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:56.019Z,1516401536.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:56.392Z,1516401536.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:56.458Z,1516401536.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:56.778Z,1516401536.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:56.827Z,1516401536.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:57.215Z,1516401537.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:57.263Z,1516401537.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:57.610Z,1516401537.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:57.640Z,1516401537.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:58.002Z,1516401538.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:58.057Z,1516401538.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:58.401Z,1516401538.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:58.415Z,1516401538.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:58.782Z,1516401538.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:58.835Z,1516401538.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:59.183Z,1516401539.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:59.227Z,1516401539.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:59.582Z,1516401539.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:38:59.617Z,1516401539.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:38:59.987Z,1516401539.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:00.032Z,1516401540.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:00.386Z,1516401540.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:00.427Z,1516401540.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:00.796Z,1516401540.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:00.835Z,1516401540.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:01.198Z,1516401541.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:01.212Z,1516401541.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:01.594Z,1516401541.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:01.609Z,1516401541.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:01.990Z,1516401541.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:02.004Z,1516401542.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:02.384Z,1516401542.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:02.403Z,1516401542.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:02.792Z,1516401542.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:02.807Z,1516401542.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:03.186Z,1516401543.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:03.204Z,1516401543.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:03.597Z,1516401543.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:03.611Z,1516401543.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:03.998Z,1516401543.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:04.013Z,1516401544.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:04.396Z,1516401544.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:04.411Z,1516401544.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:04.792Z,1516401544.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:04.806Z,1516401544.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:05.185Z,1516401545.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:05.199Z,1516401545.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:05.582Z,1516401545.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:05.604Z,1516401545.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:05.993Z,1516401545.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:06.006Z,1516401546.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:06.391Z,1516401546.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:06.411Z,1516401546.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:06.801Z,1516401546.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:06.815Z,1516401546.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:07.201Z,1516401547.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:07.215Z,1516401547.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:07.602Z,1516401547.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:07.616Z,1516401547.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:07.987Z,1516401547.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:08.007Z,1516401548.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:08.374Z,1516401548.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:08.408Z,1516401548.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:08.792Z,1516401548.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:08.807Z,1516401548.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:09.182Z,1516401549.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:09.204Z,1516401549.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:09.602Z,1516401549.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:09.616Z,1516401549.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:10.001Z,1516401550.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:10.015Z,1516401550.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:10.398Z,1516401550.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:10.412Z,1516401550.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:10.794Z,1516401550.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:10.808Z,1516401550.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:11.209Z,1516401551.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:11.244Z,1516401551.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:11.257Z,1516401551.257 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T22:39:11.599Z,1516401551.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:11.614Z,1516401551.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:12.004Z,1516401552.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:12.022Z,1516401552.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:12.403Z,1516401552.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:12.417Z,1516401552.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:12.780Z,1516401552.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:12.811Z,1516401552.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:13.174Z,1516401553.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:13.212Z,1516401553.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:13.598Z,1516401553.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:13.614Z,1516401553.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:14.010Z,1516401554.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:14.031Z,1516401554.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:14.400Z,1516401554.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:14.414Z,1516401554.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:14.784Z,1516401554.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:14.809Z,1516401554.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:15.179Z,1516401555.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:15.210Z,1516401555.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:15.599Z,1516401555.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:15.614Z,1516401555.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:15.998Z,1516401555.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:16.015Z,1516401556.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:16.398Z,1516401556.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:16.412Z,1516401556.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:16.780Z,1516401556.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:16.812Z,1516401556.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:17.177Z,1516401557.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:17.199Z,1516401557.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:17.590Z,1516401557.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:17.615Z,1516401557.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:17.990Z,1516401557.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:18.016Z,1516401558.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:18.386Z,1516401558.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:18.411Z,1516401558.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:18.788Z,1516401558.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:18.813Z,1516401558.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:19.179Z,1516401559.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:19.215Z,1516401559.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:19.586Z,1516401559.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:19.611Z,1516401559.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:20.002Z,1516401560.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:20.016Z,1516401560.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:23.122Z,1516401563.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:23.140Z,1516401563.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:23.239Z,1516401563.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:23.269Z,1516401563.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:23.616Z,1516401563.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:23.635Z,1516401563.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:24.022Z,1516401564.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:24.036Z,1516401564.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:24.416Z,1516401564.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:24.431Z,1516401564.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:24.830Z,1516401564.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:24.862Z,1516401564.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:25.230Z,1516401565.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:25.266Z,1516401565.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:25.615Z,1516401565.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:25.635Z,1516401565.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:26.016Z,1516401566.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:26.035Z,1516401566.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:26.415Z,1516401566.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:26.430Z,1516401566.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:26.808Z,1516401566.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:26.828Z,1516401566.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:27.213Z,1516401567.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:27.236Z,1516401567.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:27.623Z,1516401567.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:27.637Z,1516401567.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:28.020Z,1516401568.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:28.039Z,1516401568.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:28.422Z,1516401568.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:28.437Z,1516401568.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:28.812Z,1516401568.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:28.840Z,1516401568.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:29.219Z,1516401569.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:29.239Z,1516401569.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:29.624Z,1516401569.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:29.647Z,1516401569.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:30.026Z,1516401570.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:30.040Z,1516401570.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:30.425Z,1516401570.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:30.439Z,1516401570.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:30.820Z,1516401570.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:30.834Z,1516401570.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:31.216Z,1516401571.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:31.235Z,1516401571.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:31.626Z,1516401571.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:31.640Z,1516401571.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:32.030Z,1516401572.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:32.044Z,1516401572.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:32.426Z,1516401572.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:32.440Z,1516401572.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:32.820Z,1516401572.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:32.835Z,1516401572.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:33.218Z,1516401573.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:33.239Z,1516401573.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:33.626Z,1516401573.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:33.640Z,1516401573.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:34.026Z,1516401574.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:34.047Z,1516401574.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:34.425Z,1516401574.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:34.443Z,1516401574.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:34.825Z,1516401574.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:34.839Z,1516401574.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:35.215Z,1516401575.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:35.235Z,1516401575.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:35.624Z,1516401575.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:35.643Z,1516401575.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:36.025Z,1516401576.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:36.040Z,1516401576.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:36.425Z,1516401576.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:36.439Z,1516401576.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:36.814Z,1516401576.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:36.837Z,1516401576.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:37.220Z,1516401577.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:37.239Z,1516401577.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:37.630Z,1516401577.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:37.650Z,1516401577.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:38.030Z,1516401578.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:38.050Z,1516401578.050 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:38.051Z,1516401578.051 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-01-19T22:39:38.051Z,1516401578.051 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:39:38.052Z,1516401578.052 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:38.052Z,1516401578.052 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-01-19T22:39:38.069Z,1516401578.069 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:39:38.070Z,1516401578.070 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:38.071Z,1516401578.071 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2018-01-19T22:39:38.071Z,1516401578.071 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:39:38.096Z,1516401578.096 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:39:38.096Z,1516401578.096 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:39:38.096Z,1516401578.096 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:39:38.431Z,1516401578.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:38.481Z,1516401578.481 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:39:38.481Z,1516401578.481 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-01-19T22:39:38.482Z,1516401578.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:39:38.482Z,1516401578.482 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-01-19T22:39:38.482Z,1516401578.482 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:39:38.482Z,1516401578.482 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2018-01-19T22:39:38.808Z,1516401578.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:38.842Z,1516401578.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:39:38.842Z,1516401578.842 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:39:38.843Z,1516401578.843 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:39:38.843Z,1516401578.843 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:39:38.843Z,1516401578.843 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:39:38.844Z,1516401578.844 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:39:38.844Z,1516401578.844 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:39:38.844Z,1516401578.844 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:39:38.845Z,1516401578.845 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:39:39.208Z,1516401579.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:39.243Z,1516401579.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:39:39.244Z,1516401579.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:39.630Z,1516401579.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:39.651Z,1516401579.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:39:39.652Z,1516401579.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:40.035Z,1516401580.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:40.048Z,1516401580.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:39:40.049Z,1516401580.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:40.425Z,1516401580.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:40.444Z,1516401580.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:39:40.445Z,1516401580.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:40.804Z,1516401580.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:40.839Z,1516401580.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:39:40.839Z,1516401580.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:41.211Z,1516401581.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:41.242Z,1516401581.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:39:41.243Z,1516401581.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:41.633Z,1516401581.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:41.647Z,1516401581.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T22:39:41.648Z,1516401581.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:42.037Z,1516401582.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:42.051Z,1516401582.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T22:39:42.052Z,1516401582.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:42.414Z,1516401582.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:42.450Z,1516401582.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T22:39:42.451Z,1516401582.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:42.813Z,1516401582.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:42.843Z,1516401582.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T22:39:42.844Z,1516401582.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:43.211Z,1516401583.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:43.224Z,1516401583.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T22:39:43.242Z,1516401583.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:43.626Z,1516401583.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:43.651Z,1516401583.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T22:39:43.652Z,1516401583.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:44.039Z,1516401584.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:44.062Z,1516401584.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T22:39:44.063Z,1516401584.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:44.437Z,1516401584.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:44.452Z,1516401584.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T22:39:44.453Z,1516401584.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:44.813Z,1516401584.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:44.827Z,1516401584.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:39:44.828Z,1516401584.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:45.212Z,1516401585.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:45.226Z,1516401585.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:39:45.227Z,1516401585.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:45.626Z,1516401585.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:45.660Z,1516401585.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:39:45.661Z,1516401585.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:46.022Z,1516401586.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:46.036Z,1516401586.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:39:46.053Z,1516401586.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:46.426Z,1516401586.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:46.440Z,1516401586.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:39:46.461Z,1516401586.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:46.817Z,1516401586.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:46.830Z,1516401586.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:39:46.831Z,1516401586.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:47.216Z,1516401587.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:47.234Z,1516401587.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:39:47.235Z,1516401587.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:47.634Z,1516401587.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:47.663Z,1516401587.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T22:39:47.664Z,1516401587.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:48.030Z,1516401588.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:48.043Z,1516401588.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:39:48.044Z,1516401588.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:48.422Z,1516401588.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:48.436Z,1516401588.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:39:48.437Z,1516401588.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:48.814Z,1516401588.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:48.832Z,1516401588.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:39:48.833Z,1516401588.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:49.216Z,1516401589.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:49.229Z,1516401589.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:39:49.230Z,1516401589.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:49.626Z,1516401589.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:49.640Z,1516401589.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:39:49.641Z,1516401589.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:50.026Z,1516401590.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:50.040Z,1516401590.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T22:39:50.041Z,1516401590.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:50.422Z,1516401590.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:50.442Z,1516401590.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T22:39:50.443Z,1516401590.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:50.818Z,1516401590.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:50.832Z,1516401590.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T22:39:50.833Z,1516401590.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:51.219Z,1516401591.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:51.233Z,1516401591.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T22:39:51.234Z,1516401591.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:51.623Z,1516401591.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:51.636Z,1516401591.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T22:39:51.637Z,1516401591.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:52.026Z,1516401592.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:52.040Z,1516401592.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T22:39:52.041Z,1516401592.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:52.426Z,1516401592.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:52.440Z,1516401592.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T22:39:52.440Z,1516401592.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:52.824Z,1516401592.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:52.837Z,1516401592.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:39:52.838Z,1516401592.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:53.218Z,1516401593.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:53.232Z,1516401593.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:39:53.234Z,1516401593.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:53.623Z,1516401593.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:53.637Z,1516401593.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T22:39:53.638Z,1516401593.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:54.024Z,1516401594.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:54.039Z,1516401594.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T22:39:54.039Z,1516401594.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:54.418Z,1516401594.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:54.440Z,1516401594.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T22:39:54.446Z,1516401594.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:54.820Z,1516401594.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:54.835Z,1516401594.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T22:39:54.836Z,1516401594.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:55.219Z,1516401595.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:55.233Z,1516401595.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T22:39:55.234Z,1516401595.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:55.628Z,1516401595.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:55.647Z,1516401595.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T22:39:55.648Z,1516401595.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:56.029Z,1516401596.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:56.043Z,1516401596.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T22:39:56.044Z,1516401596.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:56.429Z,1516401596.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:56.443Z,1516401596.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T22:39:56.444Z,1516401596.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:56.820Z,1516401596.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:56.834Z,1516401596.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T22:39:56.835Z,1516401596.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:57.211Z,1516401597.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:57.240Z,1516401597.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T22:39:57.241Z,1516401597.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:57.626Z,1516401597.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:57.639Z,1516401597.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T22:39:57.640Z,1516401597.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:58.025Z,1516401598.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:58.039Z,1516401598.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T22:39:58.040Z,1516401598.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:58.425Z,1516401598.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:58.439Z,1516401598.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:58.820Z,1516401598.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:58.834Z,1516401598.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:59.222Z,1516401599.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:59.236Z,1516401599.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:39:59.626Z,1516401599.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:39:59.640Z,1516401599.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:00.029Z,1516401600.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:00.043Z,1516401600.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:00.431Z,1516401600.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:00.451Z,1516401600.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:00.822Z,1516401600.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:00.836Z,1516401600.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:01.216Z,1516401601.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:01.234Z,1516401601.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:01.629Z,1516401601.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:01.651Z,1516401601.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:02.031Z,1516401602.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:02.045Z,1516401602.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:02.420Z,1516401602.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:02.450Z,1516401602.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:02.823Z,1516401602.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:02.837Z,1516401602.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:03.209Z,1516401603.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:03.240Z,1516401603.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:03.634Z,1516401603.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:03.648Z,1516401603.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:04.035Z,1516401604.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:04.051Z,1516401604.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:04.427Z,1516401604.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:04.447Z,1516401604.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:04.806Z,1516401604.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:04.839Z,1516401604.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:05.212Z,1516401605.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:05.241Z,1516401605.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:05.607Z,1516401605.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:05.643Z,1516401605.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:06.032Z,1516401606.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:06.038Z,1516401606.038 [PNI_TCM](ERROR): CRC does not match. Expected:0x39201 got:0x49483
2018-01-19T22:40:06.059Z,1516401606.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:06.434Z,1516401606.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:06.451Z,1516401606.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:06.827Z,1516401606.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:06.847Z,1516401606.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:07.203Z,1516401607.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:07.242Z,1516401607.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:07.614Z,1516401607.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:07.647Z,1516401607.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:08.010Z,1516401608.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:08.035Z,1516401608.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:08.403Z,1516401608.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:08.441Z,1516401608.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:08.834Z,1516401608.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:08.848Z,1516401608.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:09.232Z,1516401609.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:09.246Z,1516401609.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:09.616Z,1516401609.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:09.650Z,1516401609.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:10.011Z,1516401610.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:10.058Z,1516401610.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:10.411Z,1516401610.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:10.432Z,1516401610.432 [PNI_TCM](ERROR): CRC does not match. Expected:0x6626 got:0x49306
2018-01-19T22:40:10.459Z,1516401610.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:10.813Z,1516401610.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:10.847Z,1516401610.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:11.214Z,1516401611.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:11.240Z,1516401611.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:11.607Z,1516401611.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:11.642Z,1516401611.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:12.014Z,1516401612.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:12.050Z,1516401612.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:12.436Z,1516401612.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:12.451Z,1516401612.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:12.828Z,1516401612.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:12.847Z,1516401612.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:13.203Z,1516401613.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:13.245Z,1516401613.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:13.611Z,1516401613.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:13.640Z,1516401613.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:14.008Z,1516401614.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:14.039Z,1516401614.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:14.403Z,1516401614.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:14.439Z,1516401614.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:14.829Z,1516401614.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:14.847Z,1516401614.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:15.229Z,1516401615.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:15.251Z,1516401615.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:15.634Z,1516401615.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:15.648Z,1516401615.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:16.013Z,1516401616.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:16.039Z,1516401616.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:16.406Z,1516401616.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:16.439Z,1516401616.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:16.803Z,1516401616.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:16.846Z,1516401616.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:17.212Z,1516401617.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:17.244Z,1516401617.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:17.607Z,1516401617.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:17.645Z,1516401617.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:18.022Z,1516401618.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:18.054Z,1516401618.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:18.422Z,1516401618.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:18.452Z,1516401618.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:18.823Z,1516401618.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:18.852Z,1516401618.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:19.204Z,1516401619.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:19.249Z,1516401619.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:19.252Z,1516401619.252 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T22:35:18.9Z
2018-01-19T22:40:19.252Z,1516401619.252 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T22:40:19.252Z,1516401619.252 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T22:40:19.603Z,1516401619.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:19.653Z,1516401619.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:20.070Z,1516401620.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:20.092Z,1516401620.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:23.142Z,1516401623.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:23.156Z,1516401623.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:23.234Z,1516401623.234 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0036.lzma
2018-01-19T22:40:23.267Z,1516401623.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:23.299Z,1516401623.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:23.626Z,1516401623.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:23.663Z,1516401623.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:23.987Z,1516401623.987 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0036.lzma.bak
2018-01-19T22:40:23.987Z,1516401623.987 [DataOverHttps](INFO): SBD MOMSN=7724575
2018-01-19T22:40:24.023Z,1516401624.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:24.060Z,1516401624.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:24.503Z,1516401624.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:24.517Z,1516401624.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:24.812Z,1516401624.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:24.854Z,1516401624.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:27.902Z,1516401627.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:27.916Z,1516401627.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:28.012Z,1516401628.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:28.054Z,1516401628.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:28.406Z,1516401628.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:28.420Z,1516401628.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:28.818Z,1516401628.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:28.856Z,1516401628.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:29.206Z,1516401629.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:29.220Z,1516401629.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:29.601Z,1516401629.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:29.615Z,1516401629.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:32.697Z,1516401632.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:32.711Z,1516401632.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:35.913Z,1516401635.913 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20180119T210901/Express0037.lzma
2018-01-19T22:40:35.936Z,1516401635.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:35.951Z,1516401635.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:36.069Z,1516401636.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:36.084Z,1516401636.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:36.821Z,1516401636.821 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0037.lzma.bak
2018-01-19T22:40:36.821Z,1516401636.821 [DataOverHttps](INFO): SBD MOMSN=7724577
2018-01-19T22:40:36.863Z,1516401636.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:36.911Z,1516401636.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:37.177Z,1516401637.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:37.211Z,1516401637.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:37.230Z,1516401637.230 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T22:40:37.230Z,1516401637.230 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T22:40:37.230Z,1516401637.230 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T22:40:37.385Z,1516401637.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:37.399Z,1516401637.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:40.472Z,1516401640.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:40.490Z,1516401640.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:40.586Z,1516401640.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:40.607Z,1516401640.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:40.954Z,1516401640.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:40.986Z,1516401640.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:41.354Z,1516401641.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:41.385Z,1516401641.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:41.754Z,1516401641.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:41.784Z,1516401641.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:42.142Z,1516401642.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:42.163Z,1516401642.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:42.546Z,1516401642.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:42.559Z,1516401642.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:42.961Z,1516401642.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:42.987Z,1516401642.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:43.342Z,1516401643.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:43.360Z,1516401643.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:43.751Z,1516401643.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:43.770Z,1516401643.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:44.151Z,1516401644.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:44.165Z,1516401644.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:44.551Z,1516401644.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:44.565Z,1516401644.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:44.949Z,1516401644.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:44.963Z,1516401644.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:45.348Z,1516401645.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:45.364Z,1516401645.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:45.744Z,1516401645.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:45.763Z,1516401645.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:46.149Z,1516401646.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:46.163Z,1516401646.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:46.548Z,1516401646.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:46.563Z,1516401646.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:46.950Z,1516401646.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:46.965Z,1516401646.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:47.354Z,1516401647.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:47.368Z,1516401647.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:47.751Z,1516401647.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:47.765Z,1516401647.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:48.144Z,1516401648.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:48.163Z,1516401648.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:48.540Z,1516401648.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:48.555Z,1516401648.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:48.943Z,1516401648.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:49.008Z,1516401649.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:49.344Z,1516401649.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:49.363Z,1516401649.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:49.750Z,1516401649.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:49.765Z,1516401649.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:50.150Z,1516401650.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:50.164Z,1516401650.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:50.550Z,1516401650.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:50.564Z,1516401650.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:50.942Z,1516401650.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:50.956Z,1516401650.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:51.344Z,1516401651.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:51.363Z,1516401651.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:51.750Z,1516401651.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:51.765Z,1516401651.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:52.150Z,1516401652.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:52.164Z,1516401652.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:52.550Z,1516401652.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:52.564Z,1516401652.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:52.948Z,1516401652.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:52.963Z,1516401652.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:53.349Z,1516401653.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:53.363Z,1516401653.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:53.751Z,1516401653.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:53.765Z,1516401653.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:54.154Z,1516401654.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:54.168Z,1516401654.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:54.551Z,1516401654.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:54.564Z,1516401654.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:54.948Z,1516401654.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:54.963Z,1516401654.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:55.348Z,1516401655.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:55.362Z,1516401655.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:55.751Z,1516401655.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:55.765Z,1516401655.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:56.154Z,1516401656.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:56.168Z,1516401656.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:56.550Z,1516401656.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:56.565Z,1516401656.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:56.949Z,1516401656.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:56.963Z,1516401656.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:57.344Z,1516401657.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:57.367Z,1516401657.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:57.750Z,1516401657.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:57.765Z,1516401657.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:58.154Z,1516401658.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:58.168Z,1516401658.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:58.550Z,1516401658.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:58.565Z,1516401658.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:58.948Z,1516401658.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:58.963Z,1516401658.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:59.349Z,1516401659.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:59.363Z,1516401659.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:40:59.762Z,1516401659.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:40:59.776Z,1516401659.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:00.154Z,1516401660.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:00.168Z,1516401660.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:00.554Z,1516401660.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:00.568Z,1516401660.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:00.949Z,1516401660.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:00.963Z,1516401660.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:01.352Z,1516401661.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:01.366Z,1516401661.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:01.754Z,1516401661.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:01.774Z,1516401661.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:02.154Z,1516401662.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:02.168Z,1516401662.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:02.553Z,1516401662.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:02.567Z,1516401662.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:02.950Z,1516401662.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:02.963Z,1516401662.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:03.348Z,1516401663.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:03.367Z,1516401663.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:03.754Z,1516401663.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:03.768Z,1516401663.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:04.154Z,1516401664.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:04.168Z,1516401664.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:04.553Z,1516401664.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:04.567Z,1516401664.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:04.949Z,1516401664.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:04.963Z,1516401664.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:05.345Z,1516401665.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:05.359Z,1516401665.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:05.753Z,1516401665.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:05.767Z,1516401665.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:06.154Z,1516401666.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:06.168Z,1516401666.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:06.554Z,1516401666.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:06.568Z,1516401666.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:06.950Z,1516401666.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:06.964Z,1516401666.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:07.339Z,1516401667.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:07.372Z,1516401667.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:07.759Z,1516401667.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:07.773Z,1516401667.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:08.159Z,1516401668.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:08.173Z,1516401668.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:08.558Z,1516401668.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:08.579Z,1516401668.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:08.951Z,1516401668.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:08.965Z,1516401668.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:09.345Z,1516401669.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:09.368Z,1516401669.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:09.758Z,1516401669.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:09.773Z,1516401669.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:10.159Z,1516401670.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:10.173Z,1516401670.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:10.559Z,1516401670.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:10.579Z,1516401670.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:10.954Z,1516401670.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:10.968Z,1516401670.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:11.343Z,1516401671.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:11.372Z,1516401671.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:11.752Z,1516401671.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:11.778Z,1516401671.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:12.163Z,1516401672.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:12.177Z,1516401672.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:12.560Z,1516401672.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:12.574Z,1516401672.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:12.947Z,1516401672.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:12.963Z,1516401672.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:13.335Z,1516401673.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:13.362Z,1516401673.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:13.757Z,1516401673.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:13.772Z,1516401673.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:14.175Z,1516401674.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:14.203Z,1516401674.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:14.558Z,1516401674.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:14.572Z,1516401674.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:14.950Z,1516401674.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:14.964Z,1516401674.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:15.335Z,1516401675.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:15.362Z,1516401675.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:15.751Z,1516401675.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:15.778Z,1516401675.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:16.150Z,1516401676.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:16.183Z,1516401676.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:16.550Z,1516401676.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:16.576Z,1516401676.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:16.945Z,1516401676.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:16.974Z,1516401676.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:17.338Z,1516401677.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:17.373Z,1516401677.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:17.747Z,1516401677.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:17.777Z,1516401677.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:18.154Z,1516401678.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:18.176Z,1516401678.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:18.553Z,1516401678.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:18.576Z,1516401678.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:18.946Z,1516401678.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:18.976Z,1516401678.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:19.349Z,1516401679.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:19.375Z,1516401679.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:19.754Z,1516401679.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:19.784Z,1516401679.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:20.154Z,1516401680.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:20.176Z,1516401680.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:20.556Z,1516401680.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:20.587Z,1516401680.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:20.943Z,1516401680.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:20.980Z,1516401680.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:21.341Z,1516401681.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:21.377Z,1516401681.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:21.754Z,1516401681.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:21.776Z,1516401681.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:22.156Z,1516401682.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:22.179Z,1516401682.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:22.556Z,1516401682.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:22.580Z,1516401682.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:22.946Z,1516401682.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:22.981Z,1516401682.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:23.343Z,1516401683.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:23.358Z,1516401683.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:23.754Z,1516401683.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:23.778Z,1516401683.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:24.156Z,1516401684.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:24.178Z,1516401684.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:24.559Z,1516401684.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:24.590Z,1516401684.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:24.932Z,1516401684.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:24.951Z,1516401684.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:25.343Z,1516401685.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:25.385Z,1516401685.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:25.745Z,1516401685.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:25.772Z,1516401685.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:26.158Z,1516401686.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:26.195Z,1516401686.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:26.550Z,1516401686.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:26.564Z,1516401686.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:26.960Z,1516401686.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:26.996Z,1516401686.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:27.342Z,1516401687.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:27.358Z,1516401687.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:27.743Z,1516401687.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:27.771Z,1516401687.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:28.151Z,1516401688.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:28.165Z,1516401688.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:28.542Z,1516401688.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:28.575Z,1516401688.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:28.952Z,1516401688.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:28.959Z,1516401688.959 [PNI_TCM](ERROR): CRC does not match. Expected:0x53138 got:0x17164
2018-01-19T22:41:28.998Z,1516401688.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:29.355Z,1516401689.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:29.368Z,1516401689.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:29.746Z,1516401689.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:29.769Z,1516401689.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:30.142Z,1516401690.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:30.175Z,1516401690.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:30.552Z,1516401690.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:30.566Z,1516401690.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:30.944Z,1516401690.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:30.963Z,1516401690.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:31.341Z,1516401691.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:31.367Z,1516401691.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:31.740Z,1516401691.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:31.768Z,1516401691.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:32.154Z,1516401692.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:32.176Z,1516401692.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:32.560Z,1516401692.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:32.579Z,1516401692.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:32.958Z,1516401692.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:32.972Z,1516401692.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:33.343Z,1516401693.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:33.375Z,1516401693.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:33.746Z,1516401693.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:33.764Z,1516401693.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:34.132Z,1516401694.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:34.166Z,1516401694.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:34.551Z,1516401694.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:34.571Z,1516401694.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:34.958Z,1516401694.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:34.999Z,1516401694.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:35.360Z,1516401695.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:35.366Z,1516401695.366 [PNI_TCM](ERROR): CRC does not match. Expected:0x13038 got:0x16384
2018-01-19T22:41:35.397Z,1516401695.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:35.757Z,1516401695.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:35.771Z,1516401695.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:36.143Z,1516401696.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:36.164Z,1516401696.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:36.549Z,1516401696.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:36.576Z,1516401696.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:36.930Z,1516401696.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:36.968Z,1516401696.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:37.353Z,1516401697.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:37.367Z,1516401697.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:37.733Z,1516401697.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:37.787Z,1516401697.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:40.839Z,1516401700.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:40.867Z,1516401700.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:40.982Z,1516401700.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:41.013Z,1516401701.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:41.339Z,1516401701.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:41.383Z,1516401701.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:41.723Z,1516401701.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:41.738Z,1516401701.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:42.122Z,1516401702.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:42.137Z,1516401702.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:42.520Z,1516401702.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:42.554Z,1516401702.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:42.939Z,1516401702.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:42.969Z,1516401702.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:43.335Z,1516401703.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:43.349Z,1516401703.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:43.731Z,1516401703.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:43.745Z,1516401703.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:44.130Z,1516401704.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:44.146Z,1516401704.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:44.528Z,1516401704.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:44.543Z,1516401704.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:44.925Z,1516401704.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:44.940Z,1516401704.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:45.320Z,1516401705.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:45.342Z,1516401705.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:45.728Z,1516401705.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:45.743Z,1516401705.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:46.131Z,1516401706.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:46.151Z,1516401706.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:46.535Z,1516401706.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:46.555Z,1516401706.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:46.934Z,1516401706.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:46.949Z,1516401706.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:47.324Z,1516401707.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:47.347Z,1516401707.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:47.726Z,1516401707.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:47.751Z,1516401707.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:48.123Z,1516401708.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:48.139Z,1516401708.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:48.518Z,1516401708.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:48.555Z,1516401708.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:48.940Z,1516401708.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:48.958Z,1516401708.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:49.339Z,1516401709.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:49.354Z,1516401709.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:49.734Z,1516401709.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:49.757Z,1516401709.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:50.111Z,1516401710.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:50.147Z,1516401710.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:50.519Z,1516401710.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:50.546Z,1516401710.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:50.915Z,1516401710.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:50.950Z,1516401710.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:51.320Z,1516401711.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:51.355Z,1516401711.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:51.723Z,1516401711.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:51.752Z,1516401711.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:52.146Z,1516401712.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:52.164Z,1516401712.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:52.540Z,1516401712.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:52.554Z,1516401712.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:52.926Z,1516401712.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:52.947Z,1516401712.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:53.324Z,1516401713.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:53.339Z,1516401713.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:53.724Z,1516401713.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:53.739Z,1516401713.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:54.120Z,1516401714.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:54.135Z,1516401714.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:54.525Z,1516401714.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:54.540Z,1516401714.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:54.925Z,1516401714.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:54.947Z,1516401714.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:55.365Z,1516401715.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:55.379Z,1516401715.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:55.730Z,1516401715.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:55.769Z,1516401715.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:56.114Z,1516401716.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:56.139Z,1516401716.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:56.523Z,1516401716.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:56.538Z,1516401716.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:56.929Z,1516401716.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:56.944Z,1516401716.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:57.324Z,1516401717.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:57.343Z,1516401717.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:57.726Z,1516401717.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:57.741Z,1516401717.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:58.131Z,1516401718.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:58.145Z,1516401718.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:58.535Z,1516401718.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:58.549Z,1516401718.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:58.934Z,1516401718.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:58.948Z,1516401718.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:59.329Z,1516401719.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:59.344Z,1516401719.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:41:59.714Z,1516401719.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:41:59.739Z,1516401719.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:00.127Z,1516401720.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:00.143Z,1516401720.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:00.528Z,1516401720.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:00.551Z,1516401720.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:00.933Z,1516401720.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:00.955Z,1516401720.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:01.333Z,1516401721.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:01.349Z,1516401721.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:01.734Z,1516401721.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:01.749Z,1516401721.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:02.114Z,1516401722.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:02.144Z,1516401722.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:02.518Z,1516401722.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:02.534Z,1516401722.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:02.932Z,1516401722.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:02.947Z,1516401722.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:03.316Z,1516401723.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:03.339Z,1516401723.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:03.718Z,1516401723.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:03.737Z,1516401723.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:04.135Z,1516401724.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:04.149Z,1516401724.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:04.534Z,1516401724.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:04.548Z,1516401724.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:04.930Z,1516401724.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:04.944Z,1516401724.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:05.324Z,1516401725.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:05.343Z,1516401725.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:05.718Z,1516401725.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:05.751Z,1516401725.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:06.126Z,1516401726.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:06.141Z,1516401726.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:06.518Z,1516401726.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:06.540Z,1516401726.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:06.931Z,1516401726.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:06.945Z,1516401726.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:07.334Z,1516401727.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:07.349Z,1516401727.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:07.736Z,1516401727.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:07.750Z,1516401727.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:08.126Z,1516401728.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:08.151Z,1516401728.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:08.511Z,1516401728.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:08.541Z,1516401728.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:08.919Z,1516401728.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:08.951Z,1516401728.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:09.312Z,1516401729.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:09.343Z,1516401729.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:09.719Z,1516401729.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:09.745Z,1516401729.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:10.136Z,1516401730.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:10.151Z,1516401730.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:10.535Z,1516401730.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:10.550Z,1516401730.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:10.921Z,1516401730.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:10.954Z,1516401730.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:11.315Z,1516401731.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:11.350Z,1516401731.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:11.719Z,1516401731.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:11.752Z,1516401731.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:12.116Z,1516401732.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:12.146Z,1516401732.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:12.519Z,1516401732.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:12.550Z,1516401732.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:12.931Z,1516401732.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:12.957Z,1516401732.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:13.330Z,1516401733.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:13.361Z,1516401733.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:13.735Z,1516401733.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:13.759Z,1516401733.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:14.123Z,1516401734.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:14.164Z,1516401734.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:14.523Z,1516401734.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:14.538Z,1516401734.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:14.923Z,1516401734.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:14.943Z,1516401734.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:15.317Z,1516401735.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:15.331Z,1516401735.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:15.718Z,1516401735.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:15.732Z,1516401735.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:16.135Z,1516401736.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:16.169Z,1516401736.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:16.539Z,1516401736.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:16.573Z,1516401736.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:16.930Z,1516401736.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:16.951Z,1516401736.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:17.328Z,1516401737.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:17.347Z,1516401737.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:17.727Z,1516401737.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:17.747Z,1516401737.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:18.127Z,1516401738.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:18.142Z,1516401738.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:18.528Z,1516401738.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:18.547Z,1516401738.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:18.933Z,1516401738.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:18.955Z,1516401738.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:19.337Z,1516401739.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:19.352Z,1516401739.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:19.735Z,1516401739.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:19.749Z,1516401739.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:20.127Z,1516401740.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:20.147Z,1516401740.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:20.511Z,1516401740.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:20.547Z,1516401740.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:20.928Z,1516401740.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:20.951Z,1516401740.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:21.329Z,1516401741.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:21.344Z,1516401741.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:21.728Z,1516401741.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:21.743Z,1516401741.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:22.135Z,1516401742.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:22.150Z,1516401742.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:22.535Z,1516401742.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:22.549Z,1516401742.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:22.928Z,1516401742.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:22.951Z,1516401742.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:23.328Z,1516401743.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:23.343Z,1516401743.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:23.712Z,1516401743.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:23.748Z,1516401743.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:24.116Z,1516401744.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:24.144Z,1516401744.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:24.526Z,1516401744.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:24.553Z,1516401744.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:24.926Z,1516401744.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:24.963Z,1516401744.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:25.340Z,1516401745.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:25.354Z,1516401745.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:25.737Z,1516401745.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:25.751Z,1516401745.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:26.111Z,1516401746.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:26.151Z,1516401746.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:26.519Z,1516401746.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:26.548Z,1516401746.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:26.915Z,1516401746.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:26.942Z,1516401746.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:27.320Z,1516401747.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:27.355Z,1516401747.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:27.719Z,1516401747.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:27.750Z,1516401747.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:28.130Z,1516401748.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:28.159Z,1516401748.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:28.531Z,1516401748.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:28.565Z,1516401748.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:28.925Z,1516401748.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:28.961Z,1516401748.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:29.323Z,1516401749.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:29.337Z,1516401749.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:29.723Z,1516401749.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:29.743Z,1516401749.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:30.127Z,1516401750.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:30.143Z,1516401750.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:30.524Z,1516401750.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:30.538Z,1516401750.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:30.934Z,1516401750.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:30.971Z,1516401750.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:31.326Z,1516401751.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:31.341Z,1516401751.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:31.738Z,1516401751.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:31.767Z,1516401751.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:32.121Z,1516401752.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:32.143Z,1516401752.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:32.524Z,1516401752.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:32.539Z,1516401752.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:32.924Z,1516401752.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:32.939Z,1516401752.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:33.321Z,1516401753.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:33.336Z,1516401753.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:33.718Z,1516401753.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:33.733Z,1516401753.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:34.129Z,1516401754.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:34.143Z,1516401754.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:34.526Z,1516401754.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:34.547Z,1516401754.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:34.938Z,1516401754.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:34.952Z,1516401754.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:35.328Z,1516401755.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:35.343Z,1516401755.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:35.716Z,1516401755.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:35.739Z,1516401755.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:36.118Z,1516401756.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:36.139Z,1516401756.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:36.527Z,1516401756.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:36.542Z,1516401756.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:36.932Z,1516401756.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:36.946Z,1516401756.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:37.331Z,1516401757.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:37.345Z,1516401757.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:37.731Z,1516401757.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:37.750Z,1516401757.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:38.123Z,1516401758.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:38.139Z,1516401758.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:41.218Z,1516401761.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:41.232Z,1516401761.232 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:41.232Z,1516401761.232 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-01-19T22:42:41.232Z,1516401761.232 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:42:41.234Z,1516401761.234 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:41.234Z,1516401761.234 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-01-19T22:42:41.234Z,1516401761.234 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:42:41.236Z,1516401761.236 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:41.236Z,1516401761.236 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2018-01-19T22:42:41.236Z,1516401761.236 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:42:41.248Z,1516401761.248 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:42:41.248Z,1516401761.248 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:42:41.248Z,1516401761.248 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:42:41.356Z,1516401761.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:41.421Z,1516401761.421 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:42:41.421Z,1516401761.421 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-01-19T22:42:41.422Z,1516401761.422 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:42:41.422Z,1516401761.422 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-01-19T22:42:41.422Z,1516401761.422 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:42:41.422Z,1516401761.422 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2018-01-19T22:42:41.714Z,1516401761.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:41.747Z,1516401761.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:42:41.747Z,1516401761.747 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:42:41.747Z,1516401761.747 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:42:41.748Z,1516401761.748 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:42:41.748Z,1516401761.748 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:42:41.748Z,1516401761.748 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:42:41.749Z,1516401761.749 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:42:41.749Z,1516401761.749 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:42:41.750Z,1516401761.750 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:42:42.106Z,1516401762.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:42.126Z,1516401762.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-01-19T22:42:42.127Z,1516401762.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:42.505Z,1516401762.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:42.519Z,1516401762.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-01-19T22:42:42.520Z,1516401762.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:42.895Z,1516401762.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:42.914Z,1516401762.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-01-19T22:42:42.915Z,1516401762.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:43.297Z,1516401763.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:43.310Z,1516401763.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-01-19T22:42:43.311Z,1516401763.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:43.689Z,1516401763.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:43.711Z,1516401763.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-01-19T22:42:43.712Z,1516401763.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:44.106Z,1516401764.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:44.119Z,1516401764.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-01-19T22:42:44.120Z,1516401764.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:44.509Z,1516401764.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:44.522Z,1516401764.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-01-19T22:42:44.523Z,1516401764.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:44.894Z,1516401764.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:44.915Z,1516401764.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-01-19T22:42:44.915Z,1516401764.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:45.283Z,1516401765.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:45.319Z,1516401765.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-01-19T22:42:45.319Z,1516401765.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:45.687Z,1516401765.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:45.713Z,1516401765.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-01-19T22:42:45.714Z,1516401765.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:46.088Z,1516401766.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:46.113Z,1516401766.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-01-19T22:42:46.114Z,1516401766.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:46.483Z,1516401766.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:46.508Z,1516401766.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-01-19T22:42:46.509Z,1516401766.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:46.899Z,1516401766.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:46.913Z,1516401766.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-01-19T22:42:46.914Z,1516401766.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:47.300Z,1516401767.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:47.326Z,1516401767.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-01-19T22:42:47.327Z,1516401767.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:47.708Z,1516401767.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:47.722Z,1516401767.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-01-19T22:42:47.722Z,1516401767.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:48.089Z,1516401768.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:48.114Z,1516401768.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-01-19T22:42:48.115Z,1516401768.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:48.484Z,1516401768.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:48.498Z,1516401768.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-01-19T22:42:48.499Z,1516401768.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:48.902Z,1516401768.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:48.923Z,1516401768.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-01-19T22:42:48.924Z,1516401768.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:49.306Z,1516401769.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:49.330Z,1516401769.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-01-19T22:42:49.331Z,1516401769.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:49.698Z,1516401769.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:49.728Z,1516401769.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-01-19T22:42:49.730Z,1516401769.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:50.089Z,1516401770.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:50.103Z,1516401770.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-01-19T22:42:50.104Z,1516401770.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:50.491Z,1516401770.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:50.505Z,1516401770.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-01-19T22:42:50.506Z,1516401770.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:50.894Z,1516401770.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:50.908Z,1516401770.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-01-19T22:42:50.909Z,1516401770.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:51.302Z,1516401771.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:51.316Z,1516401771.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-01-19T22:42:51.329Z,1516401771.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:51.705Z,1516401771.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:51.718Z,1516401771.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-01-19T22:42:51.719Z,1516401771.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:52.090Z,1516401772.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:52.104Z,1516401772.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-01-19T22:42:52.105Z,1516401772.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:52.489Z,1516401772.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:52.510Z,1516401772.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-01-19T22:42:52.511Z,1516401772.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:52.893Z,1516401772.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:52.914Z,1516401772.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-01-19T22:42:52.915Z,1516401772.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:53.302Z,1516401773.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:53.316Z,1516401773.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-01-19T22:42:53.317Z,1516401773.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:53.696Z,1516401773.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:53.714Z,1516401773.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-01-19T22:42:53.715Z,1516401773.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:54.096Z,1516401774.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:54.109Z,1516401774.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-01-19T22:42:54.110Z,1516401774.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:54.494Z,1516401774.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:54.508Z,1516401774.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-01-19T22:42:54.509Z,1516401774.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:54.896Z,1516401774.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:54.914Z,1516401774.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-01-19T22:42:54.915Z,1516401774.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:55.302Z,1516401775.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:55.315Z,1516401775.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-01-19T22:42:55.316Z,1516401775.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:55.697Z,1516401775.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:55.710Z,1516401775.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-01-19T22:42:55.711Z,1516401775.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:56.095Z,1516401776.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:56.114Z,1516401776.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-19T22:42:56.115Z,1516401776.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:56.496Z,1516401776.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:56.509Z,1516401776.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-01-19T22:42:56.510Z,1516401776.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:56.898Z,1516401776.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:56.912Z,1516401776.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-19T22:42:56.913Z,1516401776.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:57.302Z,1516401777.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:57.316Z,1516401777.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-19T22:42:57.317Z,1516401777.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:57.698Z,1516401777.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:57.712Z,1516401777.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-01-19T22:42:57.713Z,1516401777.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:58.094Z,1516401778.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:58.108Z,1516401778.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-01-19T22:42:58.109Z,1516401778.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:58.496Z,1516401778.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:58.510Z,1516401778.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-01-19T22:42:58.511Z,1516401778.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:58.898Z,1516401778.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:58.918Z,1516401778.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-01-19T22:42:58.919Z,1516401778.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:59.307Z,1516401779.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:59.326Z,1516401779.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-19T22:42:59.327Z,1516401779.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:42:59.707Z,1516401779.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:42:59.721Z,1516401779.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-19T22:42:59.722Z,1516401779.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:00.096Z,1516401780.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:00.110Z,1516401780.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-19T22:43:00.111Z,1516401780.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:00.498Z,1516401780.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:00.512Z,1516401780.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-19T22:43:00.513Z,1516401780.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:00.907Z,1516401780.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:00.921Z,1516401780.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-19T22:43:00.922Z,1516401780.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:01.304Z,1516401781.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:01.318Z,1516401781.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:01.694Z,1516401781.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:01.726Z,1516401781.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:02.095Z,1516401782.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:02.110Z,1516401782.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:02.479Z,1516401782.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:02.523Z,1516401782.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:02.899Z,1516401782.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:02.922Z,1516401782.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:03.307Z,1516401783.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:03.321Z,1516401783.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:03.699Z,1516401783.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:03.714Z,1516401783.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:04.079Z,1516401784.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:04.115Z,1516401784.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:04.484Z,1516401784.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:04.516Z,1516401784.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:04.879Z,1516401784.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:04.915Z,1516401784.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:05.298Z,1516401785.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:05.331Z,1516401785.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:05.706Z,1516401785.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:05.721Z,1516401785.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:06.107Z,1516401786.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:06.121Z,1516401786.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:06.487Z,1516401786.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:06.512Z,1516401786.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:06.883Z,1516401786.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:06.914Z,1516401786.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:07.280Z,1516401787.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:07.311Z,1516401787.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:07.681Z,1516401787.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:07.708Z,1516401787.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:08.106Z,1516401788.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:08.120Z,1516401788.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:08.502Z,1516401788.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:08.516Z,1516401788.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:08.898Z,1516401788.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:08.919Z,1516401788.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:09.283Z,1516401789.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:09.318Z,1516401789.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:09.683Z,1516401789.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:09.715Z,1516401789.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:10.081Z,1516401790.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:10.103Z,1516401790.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:10.488Z,1516401790.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:10.519Z,1516401790.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:10.880Z,1516401790.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:10.918Z,1516401790.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:11.298Z,1516401791.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:11.331Z,1516401791.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:11.708Z,1516401791.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:11.722Z,1516401791.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:12.108Z,1516401792.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:12.122Z,1516401792.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:12.492Z,1516401792.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:12.520Z,1516401792.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:12.892Z,1516401792.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:12.920Z,1516401792.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:13.290Z,1516401793.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:13.316Z,1516401793.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:13.684Z,1516401793.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:13.699Z,1516401793.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:14.098Z,1516401794.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:14.124Z,1516401794.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:14.499Z,1516401794.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:14.525Z,1516401794.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:14.894Z,1516401794.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:14.925Z,1516401794.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:15.291Z,1516401795.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:15.327Z,1516401795.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:15.691Z,1516401795.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:15.705Z,1516401795.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:16.092Z,1516401796.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:16.107Z,1516401796.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:16.493Z,1516401796.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:16.507Z,1516401796.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:16.892Z,1516401796.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:16.906Z,1516401796.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:17.298Z,1516401797.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:17.313Z,1516401797.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:17.702Z,1516401797.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:17.716Z,1516401797.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:18.098Z,1516401798.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:18.112Z,1516401798.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:18.495Z,1516401798.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:18.515Z,1516401798.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:18.895Z,1516401798.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:18.909Z,1516401798.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:19.296Z,1516401799.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:19.310Z,1516401799.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:19.682Z,1516401799.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:19.704Z,1516401799.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:20.098Z,1516401800.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:20.113Z,1516401800.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:20.502Z,1516401800.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:20.516Z,1516401800.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:20.892Z,1516401800.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:20.922Z,1516401800.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:21.295Z,1516401801.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:21.315Z,1516401801.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:21.692Z,1516401801.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:21.710Z,1516401801.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:22.095Z,1516401802.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:22.115Z,1516401802.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:22.496Z,1516401802.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:22.510Z,1516401802.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:22.896Z,1516401802.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:22.910Z,1516401802.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:23.301Z,1516401803.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:23.315Z,1516401803.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:23.700Z,1516401803.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:23.719Z,1516401803.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:24.102Z,1516401804.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:24.123Z,1516401804.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:24.521Z,1516401804.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:24.548Z,1516401804.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:24.886Z,1516401804.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:24.908Z,1516401804.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:25.288Z,1516401805.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:25.310Z,1516401805.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:25.679Z,1516401805.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:25.710Z,1516401805.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:26.105Z,1516401806.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:26.119Z,1516401806.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:26.506Z,1516401806.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:26.520Z,1516401806.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:26.901Z,1516401806.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:26.916Z,1516401806.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:27.308Z,1516401807.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:27.351Z,1516401807.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:27.704Z,1516401807.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:27.727Z,1516401807.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:28.085Z,1516401808.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:28.124Z,1516401808.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:28.486Z,1516401808.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:28.525Z,1516401808.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:28.886Z,1516401808.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:28.927Z,1516401808.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:29.299Z,1516401809.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:29.345Z,1516401809.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:29.714Z,1516401809.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:29.757Z,1516401809.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:30.144Z,1516401810.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:30.191Z,1516401810.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:30.494Z,1516401810.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:30.516Z,1516401810.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:30.893Z,1516401810.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:30.919Z,1516401810.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:31.312Z,1516401811.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:31.356Z,1516401811.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:31.690Z,1516401811.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:31.743Z,1516401811.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:32.103Z,1516401812.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:32.154Z,1516401812.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:32.508Z,1516401812.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:32.551Z,1516401812.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:32.904Z,1516401812.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:32.927Z,1516401812.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:33.285Z,1516401813.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:33.323Z,1516401813.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:33.711Z,1516401813.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:33.734Z,1516401813.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:34.095Z,1516401814.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:34.126Z,1516401814.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:34.500Z,1516401814.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:34.514Z,1516401814.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:34.894Z,1516401814.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:34.908Z,1516401814.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:35.306Z,1516401815.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:35.337Z,1516401815.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:35.702Z,1516401815.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:35.716Z,1516401815.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:36.099Z,1516401816.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:36.113Z,1516401816.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:36.490Z,1516401816.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:36.519Z,1516401816.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:36.897Z,1516401816.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:36.911Z,1516401816.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:37.299Z,1516401817.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:37.313Z,1516401817.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:37.684Z,1516401817.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:37.699Z,1516401817.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:38.099Z,1516401818.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:38.119Z,1516401818.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:38.503Z,1516401818.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:38.517Z,1516401818.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:41.634Z,1516401821.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:41.649Z,1516401821.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:41.762Z,1516401821.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:41.795Z,1516401821.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:42.098Z,1516401822.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:42.113Z,1516401822.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:42.497Z,1516401822.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:42.510Z,1516401822.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:42.896Z,1516401822.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:42.919Z,1516401822.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:43.322Z,1516401823.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:43.348Z,1516401823.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:43.710Z,1516401823.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:43.724Z,1516401823.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:44.118Z,1516401824.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:44.151Z,1516401824.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:44.501Z,1516401824.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:44.523Z,1516401824.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:44.904Z,1516401824.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:44.918Z,1516401824.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:45.305Z,1516401825.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:45.319Z,1516401825.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:45.704Z,1516401825.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:45.723Z,1516401825.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:46.117Z,1516401826.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:46.151Z,1516401826.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:46.506Z,1516401826.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:46.521Z,1516401826.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:46.918Z,1516401826.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:46.948Z,1516401826.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:47.300Z,1516401827.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:47.314Z,1516401827.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:47.694Z,1516401827.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:47.714Z,1516401827.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:48.101Z,1516401828.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:48.123Z,1516401828.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:48.508Z,1516401828.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:48.522Z,1516401828.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:48.894Z,1516401828.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:48.914Z,1516401828.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:49.309Z,1516401829.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:49.323Z,1516401829.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:49.710Z,1516401829.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:49.723Z,1516401829.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:50.110Z,1516401830.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:50.125Z,1516401830.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:50.502Z,1516401830.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:50.517Z,1516401830.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:50.905Z,1516401830.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:50.919Z,1516401830.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:51.307Z,1516401831.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:51.327Z,1516401831.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:51.708Z,1516401831.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:51.722Z,1516401831.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:52.109Z,1516401832.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:52.124Z,1516401832.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:52.509Z,1516401832.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:52.531Z,1516401832.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:52.910Z,1516401832.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:52.931Z,1516401832.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:53.308Z,1516401833.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:53.322Z,1516401833.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:53.707Z,1516401833.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:53.727Z,1516401833.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:54.107Z,1516401834.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:54.127Z,1516401834.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:54.508Z,1516401834.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:54.522Z,1516401834.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:54.894Z,1516401834.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:54.914Z,1516401834.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:55.308Z,1516401835.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:55.327Z,1516401835.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:55.714Z,1516401835.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:55.728Z,1516401835.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:56.109Z,1516401836.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:56.123Z,1516401836.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:56.502Z,1516401836.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:56.517Z,1516401836.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:56.898Z,1516401836.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:56.924Z,1516401836.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:57.298Z,1516401837.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:57.317Z,1516401837.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:57.699Z,1516401837.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:57.720Z,1516401837.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:58.109Z,1516401838.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:58.123Z,1516401838.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:58.508Z,1516401838.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:58.527Z,1516401838.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:58.910Z,1516401838.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:58.924Z,1516401838.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:59.303Z,1516401839.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:59.317Z,1516401839.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:43:59.694Z,1516401839.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:43:59.714Z,1516401839.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:00.098Z,1516401840.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:00.128Z,1516401840.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:00.503Z,1516401840.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:00.528Z,1516401840.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:00.901Z,1516401840.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:00.915Z,1516401840.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:01.313Z,1516401841.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:01.327Z,1516401841.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:01.714Z,1516401841.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:01.735Z,1516401841.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:02.110Z,1516401842.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:02.131Z,1516401842.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:02.507Z,1516401842.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:02.527Z,1516401842.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:02.908Z,1516401842.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:02.927Z,1516401842.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:03.308Z,1516401843.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:03.323Z,1516401843.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:03.703Z,1516401843.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:03.717Z,1516401843.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:04.111Z,1516401844.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:04.134Z,1516401844.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:04.517Z,1516401844.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:04.531Z,1516401844.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:04.913Z,1516401844.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:04.927Z,1516401844.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:05.304Z,1516401845.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:05.323Z,1516401845.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:05.691Z,1516401845.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:05.723Z,1516401845.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:06.108Z,1516401846.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:06.127Z,1516401846.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:06.505Z,1516401846.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:06.527Z,1516401846.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:06.891Z,1516401846.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:06.926Z,1516401846.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:07.310Z,1516401847.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:07.332Z,1516401847.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:07.714Z,1516401847.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:07.741Z,1516401847.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:08.118Z,1516401848.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:08.133Z,1516401848.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:08.495Z,1516401848.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:08.526Z,1516401848.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:08.895Z,1516401848.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:08.931Z,1516401848.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:09.300Z,1516401849.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:09.330Z,1516401849.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:09.695Z,1516401849.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:09.730Z,1516401849.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:10.119Z,1516401850.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:10.134Z,1516401850.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:10.506Z,1516401850.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:10.543Z,1516401850.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:10.910Z,1516401850.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:10.936Z,1516401850.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:11.295Z,1516401851.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:11.310Z,1516401851.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:11.699Z,1516401851.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:11.739Z,1516401851.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:12.103Z,1516401852.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:12.139Z,1516401852.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:12.504Z,1516401852.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:12.519Z,1516401852.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:12.904Z,1516401852.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:12.923Z,1516401852.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:13.313Z,1516401853.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:13.327Z,1516401853.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:13.718Z,1516401853.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:13.733Z,1516401853.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:14.113Z,1516401854.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:14.127Z,1516401854.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:14.509Z,1516401854.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:14.523Z,1516401854.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:14.905Z,1516401854.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:14.919Z,1516401854.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:15.296Z,1516401855.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:15.318Z,1516401855.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:15.709Z,1516401855.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:15.724Z,1516401855.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:16.115Z,1516401856.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:16.131Z,1516401856.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:16.514Z,1516401856.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:16.528Z,1516401856.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:16.914Z,1516401856.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:16.930Z,1516401856.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:17.310Z,1516401857.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:17.325Z,1516401857.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:17.709Z,1516401857.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:17.723Z,1516401857.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:18.110Z,1516401858.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:18.124Z,1516401858.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:18.507Z,1516401858.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:18.522Z,1516401858.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:18.908Z,1516401858.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:18.922Z,1516401858.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:19.314Z,1516401859.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:19.334Z,1516401859.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:19.715Z,1516401859.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:19.730Z,1516401859.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:20.114Z,1516401860.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:20.128Z,1516401860.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:20.502Z,1516401860.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:20.543Z,1516401860.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:20.909Z,1516401860.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:20.923Z,1516401860.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:21.308Z,1516401861.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:21.324Z,1516401861.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:21.707Z,1516401861.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:21.728Z,1516401861.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:22.113Z,1516401862.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:22.128Z,1516401862.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:22.514Z,1516401862.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:22.529Z,1516401862.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:22.912Z,1516401862.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:22.927Z,1516401862.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:23.304Z,1516401863.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:23.318Z,1516401863.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:23.694Z,1516401863.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:23.723Z,1516401863.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:24.105Z,1516401864.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:24.124Z,1516401864.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:24.492Z,1516401864.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:24.523Z,1516401864.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:24.907Z,1516401864.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:24.921Z,1516401864.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:25.314Z,1516401865.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:25.328Z,1516401865.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:25.714Z,1516401865.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:25.728Z,1516401865.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:26.110Z,1516401866.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:26.124Z,1516401866.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:26.498Z,1516401866.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:26.520Z,1516401866.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:26.891Z,1516401866.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:26.926Z,1516401866.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:27.309Z,1516401867.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:27.323Z,1516401867.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:27.698Z,1516401867.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:27.721Z,1516401867.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:28.111Z,1516401868.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:28.125Z,1516401868.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:28.517Z,1516401868.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:28.535Z,1516401868.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:28.918Z,1516401868.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:28.935Z,1516401868.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:29.305Z,1516401869.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:29.319Z,1516401869.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:29.709Z,1516401869.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:29.723Z,1516401869.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:30.104Z,1516401870.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:30.123Z,1516401870.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:30.504Z,1516401870.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:30.518Z,1516401870.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:30.909Z,1516401870.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:30.923Z,1516401870.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:31.315Z,1516401871.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:31.330Z,1516401871.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:31.715Z,1516401871.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:31.730Z,1516401871.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:32.118Z,1516401872.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:32.133Z,1516401872.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:32.507Z,1516401872.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:32.523Z,1516401872.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:32.891Z,1516401872.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:32.918Z,1516401872.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:33.308Z,1516401873.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:33.322Z,1516401873.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:33.698Z,1516401873.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:33.720Z,1516401873.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:34.111Z,1516401874.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:34.125Z,1516401874.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:34.514Z,1516401874.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:34.528Z,1516401874.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:34.913Z,1516401874.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:34.928Z,1516401874.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:35.291Z,1516401875.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:35.318Z,1516401875.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:35.691Z,1516401875.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:35.722Z,1516401875.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:36.098Z,1516401876.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:36.120Z,1516401876.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:36.492Z,1516401876.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:36.526Z,1516401876.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:36.907Z,1516401876.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:36.927Z,1516401876.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:37.314Z,1516401877.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:37.328Z,1516401877.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:37.718Z,1516401877.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:37.735Z,1516401877.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:38.117Z,1516401878.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:38.135Z,1516401878.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:38.503Z,1516401878.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:38.523Z,1516401878.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:41.588Z,1516401881.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:41.612Z,1516401881.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:41.723Z,1516401881.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:41.743Z,1516401881.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:42.072Z,1516401882.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:42.091Z,1516401882.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:42.490Z,1516401882.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:42.512Z,1516401882.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:42.878Z,1516401882.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:42.892Z,1516401882.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:43.272Z,1516401883.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:43.286Z,1516401883.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:43.667Z,1516401883.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:43.681Z,1516401883.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:44.079Z,1516401884.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:44.099Z,1516401884.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:44.476Z,1516401884.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:44.495Z,1516401884.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:44.877Z,1516401884.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:44.891Z,1516401884.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:45.272Z,1516401885.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:45.286Z,1516401885.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:45.675Z,1516401885.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:45.689Z,1516401885.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:46.078Z,1516401886.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:46.092Z,1516401886.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:46.478Z,1516401886.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:46.492Z,1516401886.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:46.876Z,1516401886.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:46.895Z,1516401886.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:47.276Z,1516401887.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:47.290Z,1516401887.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:47.674Z,1516401887.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:47.688Z,1516401887.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:48.076Z,1516401888.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:48.095Z,1516401888.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:48.478Z,1516401888.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:48.492Z,1516401888.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:48.880Z,1516401888.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:48.894Z,1516401888.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:49.262Z,1516401889.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:49.295Z,1516401889.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:49.664Z,1516401889.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:49.690Z,1516401889.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:50.082Z,1516401890.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:50.096Z,1516401890.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:50.484Z,1516401890.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:50.498Z,1516401890.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:50.877Z,1516401890.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:50.891Z,1516401890.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:51.275Z,1516401891.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:51.290Z,1516401891.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:51.676Z,1516401891.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:51.695Z,1516401891.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:52.072Z,1516401892.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:52.098Z,1516401892.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:52.486Z,1516401892.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:52.503Z,1516401892.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:52.874Z,1516401892.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:52.888Z,1516401892.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:53.282Z,1516401893.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:53.296Z,1516401893.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:53.660Z,1516401893.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:53.690Z,1516401893.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:54.081Z,1516401894.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:54.095Z,1516401894.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:54.482Z,1516401894.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:54.495Z,1516401894.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:54.874Z,1516401894.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:54.897Z,1516401894.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:55.275Z,1516401895.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:55.302Z,1516401895.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:55.666Z,1516401895.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:55.696Z,1516401895.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:56.085Z,1516401896.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:56.099Z,1516401896.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:56.478Z,1516401896.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:56.503Z,1516401896.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:56.869Z,1516401896.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:56.907Z,1516401896.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:57.257Z,1516401897.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:57.302Z,1516401897.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:57.662Z,1516401897.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:57.669Z,1516401897.669 [PNI_TCM](ERROR): CRC does not match. Expected:0x44873 got:0x31608
2018-01-19T22:44:57.698Z,1516401897.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:58.058Z,1516401898.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:58.071Z,1516401898.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:58.466Z,1516401898.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:58.499Z,1516401898.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:58.880Z,1516401898.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:58.898Z,1516401898.898 [PNI_TCM](ERROR): CRC does not match. Expected:0x49339 got:0x3265
2018-01-19T22:44:58.923Z,1516401898.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:59.275Z,1516401899.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:59.303Z,1516401899.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:44:59.657Z,1516401899.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:44:59.671Z,1516401899.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:00.067Z,1516401900.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:00.103Z,1516401900.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:00.470Z,1516401900.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:00.501Z,1516401900.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:00.855Z,1516401900.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:00.888Z,1516401900.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:01.286Z,1516401901.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:01.307Z,1516401901.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:01.670Z,1516401901.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:01.709Z,1516401901.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:02.066Z,1516401902.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:02.084Z,1516401902.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:02.467Z,1516401902.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:02.486Z,1516401902.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:02.872Z,1516401902.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:02.886Z,1516401902.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:03.260Z,1516401903.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:03.303Z,1516401903.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:03.668Z,1516401903.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:03.686Z,1516401903.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:04.068Z,1516401904.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:04.083Z,1516401904.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:04.469Z,1516401904.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:04.483Z,1516401904.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:04.878Z,1516401904.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:04.911Z,1516401904.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:05.266Z,1516401905.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:05.291Z,1516401905.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:05.666Z,1516401905.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:05.675Z,1516401905.675 [PNI_TCM](ERROR): CRC does not match. Expected:0x53138 got:0x17164
2018-01-19T22:45:05.710Z,1516401905.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:06.068Z,1516401906.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:06.087Z,1516401906.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:06.465Z,1516401906.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:06.512Z,1516401906.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:06.860Z,1516401906.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:06.882Z,1516401906.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:07.276Z,1516401907.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:07.291Z,1516401907.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:07.683Z,1516401907.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:07.712Z,1516401907.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:08.071Z,1516401908.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:08.109Z,1516401908.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:08.464Z,1516401908.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:08.506Z,1516401908.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:08.869Z,1516401908.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:08.886Z,1516401908.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:09.263Z,1516401909.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:09.279Z,1516401909.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:09.667Z,1516401909.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:09.707Z,1516401909.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:10.068Z,1516401910.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:10.084Z,1516401910.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:10.481Z,1516401910.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:10.513Z,1516401910.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:10.880Z,1516401910.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:10.909Z,1516401910.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:11.274Z,1516401911.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:11.318Z,1516401911.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:11.656Z,1516401911.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:11.683Z,1516401911.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:12.064Z,1516401912.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:12.085Z,1516401912.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:12.466Z,1516401912.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:12.482Z,1516401912.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:12.863Z,1516401912.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:12.910Z,1516401912.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:13.274Z,1516401913.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:13.291Z,1516401913.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:13.684Z,1516401913.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:13.718Z,1516401913.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:14.068Z,1516401914.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:14.085Z,1516401914.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:14.466Z,1516401914.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:14.515Z,1516401914.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:14.868Z,1516401914.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:14.882Z,1516401914.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:15.257Z,1516401915.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:15.288Z,1516401915.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:15.672Z,1516401915.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:15.689Z,1516401915.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:16.071Z,1516401916.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:16.095Z,1516401916.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:16.474Z,1516401916.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:16.489Z,1516401916.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:16.878Z,1516401916.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:16.896Z,1516401916.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:17.276Z,1516401917.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:17.298Z,1516401917.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:17.661Z,1516401917.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:17.695Z,1516401917.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:18.071Z,1516401918.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:18.085Z,1516401918.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:18.469Z,1516401918.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:18.483Z,1516401918.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:18.864Z,1516401918.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:18.886Z,1516401918.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:19.274Z,1516401919.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:19.289Z,1516401919.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:19.674Z,1516401919.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:19.688Z,1516401919.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:20.088Z,1516401920.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:20.196Z,1516401920.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:20.471Z,1516401920.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:20.511Z,1516401920.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:20.871Z,1516401920.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:20.895Z,1516401920.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:21.265Z,1516401921.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:21.279Z,1516401921.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:21.671Z,1516401921.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:21.685Z,1516401921.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:22.071Z,1516401922.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:22.090Z,1516401922.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:22.474Z,1516401922.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:22.489Z,1516401922.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:22.874Z,1516401922.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:22.888Z,1516401922.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:23.273Z,1516401923.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:23.298Z,1516401923.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:23.672Z,1516401923.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:23.690Z,1516401923.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:24.067Z,1516401924.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:24.081Z,1516401924.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:24.464Z,1516401924.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:24.478Z,1516401924.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:24.858Z,1516401924.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:24.880Z,1516401924.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:25.272Z,1516401925.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:25.294Z,1516401925.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:25.678Z,1516401925.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:25.692Z,1516401925.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:26.071Z,1516401926.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:26.091Z,1516401926.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:26.471Z,1516401926.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:26.485Z,1516401926.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:26.868Z,1516401926.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:26.882Z,1516401926.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:27.298Z,1516401927.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:27.372Z,1516401927.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:27.668Z,1516401927.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:27.699Z,1516401927.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:28.070Z,1516401928.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:28.083Z,1516401928.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:28.477Z,1516401928.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:28.494Z,1516401928.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:28.876Z,1516401928.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:28.895Z,1516401928.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:29.278Z,1516401929.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:29.291Z,1516401929.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:29.666Z,1516401929.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:29.680Z,1516401929.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:30.062Z,1516401930.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:30.094Z,1516401930.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:30.473Z,1516401930.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:30.487Z,1516401930.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:30.866Z,1516401930.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:30.881Z,1516401930.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:31.272Z,1516401931.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:31.299Z,1516401931.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:31.682Z,1516401931.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:31.698Z,1516401931.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:32.079Z,1516401932.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:32.099Z,1516401932.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:32.466Z,1516401932.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:32.493Z,1516401932.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:32.860Z,1516401932.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:32.895Z,1516401932.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:33.258Z,1516401933.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:33.293Z,1516401933.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:33.675Z,1516401933.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:33.689Z,1516401933.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:34.056Z,1516401934.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:34.092Z,1516401934.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:34.485Z,1516401934.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:34.499Z,1516401934.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:34.884Z,1516401934.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:34.899Z,1516401934.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:35.283Z,1516401935.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:35.297Z,1516401935.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:35.657Z,1516401935.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:35.695Z,1516401935.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:36.063Z,1516401936.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:36.089Z,1516401936.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:36.456Z,1516401936.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:36.493Z,1516401936.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:36.857Z,1516401936.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:36.883Z,1516401936.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:37.270Z,1516401937.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:37.296Z,1516401937.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:37.670Z,1516401937.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:37.696Z,1516401937.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:37.699Z,1516401937.699 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T22:45:37.699Z,1516401937.699 [Default:CheckIn:C.Wait] Stopped
2018-01-19T22:45:37.699Z,1516401937.699 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T22:45:37.700Z,1516401937.700 [Default:CheckIn:D] Running Loop=1
2018-01-19T22:45:38.070Z,1516401938.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:38.099Z,1516401938.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:38.103Z,1516401938.103 [Default:CheckIn:D] Stopped
2018-01-19T22:45:38.103Z,1516401938.103 [Default:CheckIn:E] Running Loop=1
2018-01-19T22:45:38.472Z,1516401938.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:38.487Z,1516401938.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:38.490Z,1516401938.490 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 92.834619 min 
2018-01-19T22:45:38.490Z,1516401938.490 [Default:CheckIn:E] Stopped
2018-01-19T22:45:38.491Z,1516401938.491 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T22:45:38.491Z,1516401938.491 [Default:CheckIn] Stopped
2018-01-19T22:45:38.491Z,1516401938.491 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T22:45:38.491Z,1516401938.491 [Default:CheckIn](INFO): Running loop #10
2018-01-19T22:45:38.491Z,1516401938.491 [Default:CheckIn] Running Loop=10
2018-01-19T22:45:38.491Z,1516401938.491 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T22:45:38.491Z,1516401938.491 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T22:45:38.860Z,1516401938.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:38.894Z,1516401938.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:41.954Z,1516401941.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:41.975Z,1516401941.975 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:41.975Z,1516401941.975 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-01-19T22:45:41.976Z,1516401941.976 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:45:41.977Z,1516401941.977 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:41.978Z,1516401941.978 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-01-19T22:45:41.978Z,1516401941.978 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:45:41.979Z,1516401941.979 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:41.979Z,1516401941.979 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2018-01-19T22:45:41.979Z,1516401941.979 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:45:41.991Z,1516401941.991 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:45:41.992Z,1516401941.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:45:41.992Z,1516401941.992 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:45:42.089Z,1516401942.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:42.148Z,1516401942.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:45:42.148Z,1516401942.148 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-01-19T22:45:42.148Z,1516401942.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:45:42.148Z,1516401942.148 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-01-19T22:45:42.153Z,1516401942.153 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:45:42.153Z,1516401942.153 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2018-01-19T22:45:42.443Z,1516401942.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:42.461Z,1516401942.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:45:42.461Z,1516401942.461 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:45:42.462Z,1516401942.462 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:45:42.462Z,1516401942.462 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:45:42.462Z,1516401942.462 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:45:42.463Z,1516401942.463 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:45:42.463Z,1516401942.463 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:45:42.463Z,1516401942.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:45:42.464Z,1516401942.464 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:45:42.851Z,1516401942.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:42.864Z,1516401942.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-01-19T22:45:42.865Z,1516401942.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:43.238Z,1516401943.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:43.260Z,1516401943.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-01-19T22:45:43.261Z,1516401943.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:43.627Z,1516401943.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:43.659Z,1516401943.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-01-19T22:45:43.660Z,1516401943.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:44.023Z,1516401944.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:44.054Z,1516401944.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-01-19T22:45:44.055Z,1516401944.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:44.432Z,1516401944.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:44.457Z,1516401944.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-01-19T22:45:44.458Z,1516401944.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:44.827Z,1516401944.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:44.852Z,1516401944.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-01-19T22:45:44.853Z,1516401944.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:45.243Z,1516401945.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:45.257Z,1516401945.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-01-19T22:45:45.258Z,1516401945.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:45.646Z,1516401945.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:45.660Z,1516401945.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-01-19T22:45:45.661Z,1516401945.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:46.050Z,1516401946.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:46.064Z,1516401946.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-01-19T22:45:46.065Z,1516401946.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:46.423Z,1516401946.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:46.455Z,1516401946.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-01-19T22:45:46.456Z,1516401946.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:46.825Z,1516401946.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:46.858Z,1516401946.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-01-19T22:45:46.859Z,1516401946.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:47.227Z,1516401947.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:47.258Z,1516401947.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-01-19T22:45:47.259Z,1516401947.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:47.624Z,1516401947.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:47.655Z,1516401947.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-01-19T22:45:47.656Z,1516401947.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:48.031Z,1516401948.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:48.056Z,1516401948.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-01-19T22:45:48.057Z,1516401948.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:48.446Z,1516401948.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:48.460Z,1516401948.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-01-19T22:45:48.461Z,1516401948.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:48.846Z,1516401948.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:48.860Z,1516401948.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-01-19T22:45:48.861Z,1516401948.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:49.250Z,1516401949.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:49.264Z,1516401949.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-01-19T22:45:49.265Z,1516401949.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:49.627Z,1516401949.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:49.658Z,1516401949.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-01-19T22:45:49.659Z,1516401949.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:50.023Z,1516401950.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:50.059Z,1516401950.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-01-19T22:45:50.060Z,1516401950.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:50.424Z,1516401950.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:50.454Z,1516401950.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-01-19T22:45:50.455Z,1516401950.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:50.827Z,1516401950.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:50.858Z,1516401950.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-01-19T22:45:50.859Z,1516401950.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:51.238Z,1516401951.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:51.260Z,1516401951.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-01-19T22:45:51.261Z,1516401951.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:51.646Z,1516401951.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:51.660Z,1516401951.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-01-19T22:45:51.661Z,1516401951.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:52.046Z,1516401952.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:52.060Z,1516401952.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-01-19T22:45:52.061Z,1516401952.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:52.423Z,1516401952.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:52.459Z,1516401952.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-01-19T22:45:52.459Z,1516401952.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:52.825Z,1516401952.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:52.851Z,1516401952.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-01-19T22:45:52.852Z,1516401952.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:53.231Z,1516401953.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:53.256Z,1516401953.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-01-19T22:45:53.257Z,1516401953.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:53.624Z,1516401953.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:53.659Z,1516401953.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-01-19T22:45:53.660Z,1516401953.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:54.031Z,1516401954.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:54.056Z,1516401954.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-01-19T22:45:54.057Z,1516401954.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:54.442Z,1516401954.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:54.463Z,1516401954.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-01-19T22:45:54.464Z,1516401954.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:54.847Z,1516401954.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:54.861Z,1516401954.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-01-19T22:45:54.862Z,1516401954.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:55.242Z,1516401955.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:55.263Z,1516401955.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-01-19T22:45:55.264Z,1516401955.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:55.631Z,1516401955.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:55.656Z,1516401955.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-01-19T22:45:55.657Z,1516401955.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:56.023Z,1516401956.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:56.059Z,1516401956.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-01-19T22:45:56.059Z,1516401956.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:56.432Z,1516401956.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:56.458Z,1516401956.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-01-19T22:45:56.459Z,1516401956.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:56.827Z,1516401956.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:56.862Z,1516401956.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-19T22:45:56.863Z,1516401956.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:57.234Z,1516401957.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:57.256Z,1516401957.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-01-19T22:45:57.261Z,1516401957.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:57.638Z,1516401957.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:57.670Z,1516401957.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-19T22:45:57.671Z,1516401957.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:58.038Z,1516401958.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:58.075Z,1516401958.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-19T22:45:58.076Z,1516401958.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:58.427Z,1516401958.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:58.446Z,1516401958.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-01-19T22:45:58.447Z,1516401958.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:58.824Z,1516401958.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:58.838Z,1516401958.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-01-19T22:45:58.839Z,1516401958.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:59.235Z,1516401959.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:59.267Z,1516401959.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-01-19T22:45:59.268Z,1516401959.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:45:59.636Z,1516401959.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:45:59.672Z,1516401959.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-01-19T22:45:59.673Z,1516401959.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:00.028Z,1516401960.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:00.042Z,1516401960.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-19T22:46:00.043Z,1516401960.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:00.446Z,1516401960.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:00.469Z,1516401960.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-19T22:46:00.470Z,1516401960.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:00.846Z,1516401960.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:00.869Z,1516401960.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-19T22:46:00.870Z,1516401960.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:01.242Z,1516401961.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:01.272Z,1516401961.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-19T22:46:01.273Z,1516401961.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:01.635Z,1516401961.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:01.654Z,1516401961.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-19T22:46:01.655Z,1516401961.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:02.032Z,1516401962.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:02.046Z,1516401962.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:02.438Z,1516401962.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:02.459Z,1516401962.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:02.836Z,1516401962.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:02.851Z,1516401962.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:03.250Z,1516401963.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:03.264Z,1516401963.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:03.650Z,1516401963.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:03.664Z,1516401963.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:04.042Z,1516401964.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:04.056Z,1516401964.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:04.440Z,1516401964.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:04.454Z,1516401964.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:04.834Z,1516401964.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:04.848Z,1516401964.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:05.236Z,1516401965.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:05.250Z,1516401965.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:05.633Z,1516401965.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:05.647Z,1516401965.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:06.041Z,1516401966.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:06.055Z,1516401966.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:06.444Z,1516401966.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:06.465Z,1516401966.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:06.847Z,1516401966.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:06.860Z,1516401966.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:07.237Z,1516401967.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:07.251Z,1516401967.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:07.641Z,1516401967.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:07.655Z,1516401967.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:08.038Z,1516401968.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:08.052Z,1516401968.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:08.430Z,1516401968.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:08.458Z,1516401968.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:08.841Z,1516401968.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:08.855Z,1516401968.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:09.244Z,1516401969.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:09.258Z,1516401969.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:09.647Z,1516401969.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:09.662Z,1516401969.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:10.051Z,1516401970.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:10.071Z,1516401970.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:10.441Z,1516401970.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:10.455Z,1516401970.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:10.833Z,1516401970.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:10.852Z,1516401970.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:11.230Z,1516401971.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:11.256Z,1516401971.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:11.641Z,1516401971.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:11.655Z,1516401971.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:12.025Z,1516401972.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:12.052Z,1516401972.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:12.450Z,1516401972.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:12.471Z,1516401972.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:12.855Z,1516401972.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:12.870Z,1516401972.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:13.238Z,1516401973.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:13.272Z,1516401973.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:13.627Z,1516401973.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:13.652Z,1516401973.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:14.027Z,1516401974.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:14.055Z,1516401974.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:14.432Z,1516401974.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:14.457Z,1516401974.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:14.831Z,1516401974.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:14.856Z,1516401974.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:15.242Z,1516401975.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:15.261Z,1516401975.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:15.645Z,1516401975.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:15.667Z,1516401975.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:16.050Z,1516401976.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:16.071Z,1516401976.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:16.432Z,1516401976.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:16.459Z,1516401976.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:16.825Z,1516401976.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:16.851Z,1516401976.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:17.247Z,1516401977.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:17.261Z,1516401977.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:17.651Z,1516401977.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:17.665Z,1516401977.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:18.034Z,1516401978.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:18.075Z,1516401978.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:18.429Z,1516401978.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:18.455Z,1516401978.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:18.824Z,1516401978.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:18.838Z,1516401978.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:19.239Z,1516401979.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:19.266Z,1516401979.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:19.650Z,1516401979.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:19.679Z,1516401979.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:20.047Z,1516401980.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:20.070Z,1516401980.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:20.436Z,1516401980.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:20.451Z,1516401980.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:20.834Z,1516401980.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:20.855Z,1516401980.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:21.247Z,1516401981.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:21.284Z,1516401981.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:21.634Z,1516401981.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:21.648Z,1516401981.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:22.042Z,1516401982.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:22.057Z,1516401982.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:22.437Z,1516401982.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:22.451Z,1516401982.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:22.828Z,1516401982.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:22.846Z,1516401982.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:23.250Z,1516401983.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:23.280Z,1516401983.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:23.642Z,1516401983.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:23.656Z,1516401983.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:24.050Z,1516401984.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:24.079Z,1516401984.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:24.437Z,1516401984.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:24.451Z,1516401984.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:24.836Z,1516401984.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:24.850Z,1516401984.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:25.236Z,1516401985.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:25.255Z,1516401985.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:25.650Z,1516401985.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:25.680Z,1516401985.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:26.050Z,1516401986.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:26.081Z,1516401986.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:26.433Z,1516401986.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:26.448Z,1516401986.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:26.837Z,1516401986.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:26.851Z,1516401986.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:27.238Z,1516401987.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:27.252Z,1516401987.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:27.638Z,1516401987.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:27.652Z,1516401987.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:28.050Z,1516401988.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:28.080Z,1516401988.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:28.437Z,1516401988.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:28.458Z,1516401988.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:28.828Z,1516401988.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:28.846Z,1516401988.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:29.238Z,1516401989.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:29.252Z,1516401989.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:29.650Z,1516401989.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:29.681Z,1516401989.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:30.038Z,1516401990.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:30.052Z,1516401990.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:30.434Z,1516401990.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:30.448Z,1516401990.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:30.836Z,1516401990.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:30.855Z,1516401990.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:31.236Z,1516401991.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:31.255Z,1516401991.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:31.650Z,1516401991.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:31.680Z,1516401991.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:32.038Z,1516401992.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:32.053Z,1516401992.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:32.437Z,1516401992.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:32.451Z,1516401992.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:32.836Z,1516401992.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:32.855Z,1516401992.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:33.238Z,1516401993.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:33.253Z,1516401993.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:33.638Z,1516401993.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:33.652Z,1516401993.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:34.050Z,1516401994.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:34.080Z,1516401994.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:34.435Z,1516401994.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:34.457Z,1516401994.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:34.833Z,1516401994.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:34.847Z,1516401994.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:35.242Z,1516401995.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:35.257Z,1516401995.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:35.646Z,1516401995.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:35.660Z,1516401995.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:36.042Z,1516401996.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:36.057Z,1516401996.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:36.439Z,1516401996.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:36.459Z,1516401996.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:36.838Z,1516401996.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:36.859Z,1516401996.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:37.243Z,1516401997.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:37.257Z,1516401997.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:37.646Z,1516401997.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:37.660Z,1516401997.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:38.042Z,1516401998.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:38.057Z,1516401998.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:38.439Z,1516401998.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:38.453Z,1516401998.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:38.835Z,1516401998.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:38.855Z,1516401998.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:39.243Z,1516401999.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:39.257Z,1516401999.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:42.338Z,1516402002.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:42.359Z,1516402002.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:42.476Z,1516402002.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:42.507Z,1516402002.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:42.845Z,1516402002.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:42.859Z,1516402002.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:43.245Z,1516402003.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:43.259Z,1516402003.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:43.645Z,1516402003.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:43.659Z,1516402003.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:44.044Z,1516402004.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:44.063Z,1516402004.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:44.446Z,1516402004.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:44.461Z,1516402004.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:44.846Z,1516402004.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:44.867Z,1516402004.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:45.246Z,1516402005.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:45.261Z,1516402005.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:45.633Z,1516402005.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:45.655Z,1516402005.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:46.052Z,1516402006.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:46.074Z,1516402006.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:46.433Z,1516402006.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:46.463Z,1516402006.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:46.828Z,1516402006.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:46.867Z,1516402006.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:47.253Z,1516402007.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:47.267Z,1516402007.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:47.646Z,1516402007.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:47.670Z,1516402007.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:48.056Z,1516402008.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:48.075Z,1516402008.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:48.436Z,1516402008.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:48.464Z,1516402008.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:48.827Z,1516402008.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:48.859Z,1516402008.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:49.255Z,1516402009.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:49.275Z,1516402009.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:49.654Z,1516402009.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:49.675Z,1516402009.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:50.041Z,1516402010.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:50.069Z,1516402010.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:50.427Z,1516402010.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:50.467Z,1516402010.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:50.836Z,1516402010.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:50.870Z,1516402010.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:51.235Z,1516402011.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:51.249Z,1516402011.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:51.650Z,1516402011.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:51.674Z,1516402011.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:52.050Z,1516402012.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:52.072Z,1516402012.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:52.446Z,1516402012.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:52.480Z,1516402012.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:52.835Z,1516402012.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:52.855Z,1516402012.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:53.239Z,1516402013.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:53.254Z,1516402013.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:53.641Z,1516402013.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:53.655Z,1516402013.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:54.041Z,1516402014.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:54.063Z,1516402014.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:54.454Z,1516402014.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:54.468Z,1516402014.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:54.850Z,1516402014.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:54.864Z,1516402014.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:55.246Z,1516402015.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:55.260Z,1516402015.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:55.641Z,1516402015.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:55.655Z,1516402015.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:56.044Z,1516402016.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:56.058Z,1516402016.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:56.444Z,1516402016.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:56.458Z,1516402016.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:56.839Z,1516402016.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:56.858Z,1516402016.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:57.238Z,1516402017.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:57.264Z,1516402017.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:57.645Z,1516402017.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:57.660Z,1516402017.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:58.046Z,1516402018.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:58.067Z,1516402018.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:58.446Z,1516402018.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:58.466Z,1516402018.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:58.837Z,1516402018.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:58.851Z,1516402018.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:59.239Z,1516402019.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:59.253Z,1516402019.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:46:59.636Z,1516402019.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:46:59.650Z,1516402019.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:00.043Z,1516402020.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:00.057Z,1516402020.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:00.444Z,1516402020.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:00.463Z,1516402020.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:00.850Z,1516402020.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:00.864Z,1516402020.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:01.246Z,1516402021.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:01.260Z,1516402021.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:01.642Z,1516402021.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:01.656Z,1516402021.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:02.043Z,1516402022.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:02.057Z,1516402022.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:02.444Z,1516402022.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:02.458Z,1516402022.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:02.840Z,1516402022.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:02.854Z,1516402022.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:03.236Z,1516402023.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:03.255Z,1516402023.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:03.646Z,1516402023.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:03.661Z,1516402023.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:04.046Z,1516402024.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:04.060Z,1516402024.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:04.446Z,1516402024.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:04.466Z,1516402024.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:04.841Z,1516402024.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:04.855Z,1516402024.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:05.243Z,1516402025.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:05.263Z,1516402025.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:05.644Z,1516402025.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:05.658Z,1516402025.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:06.043Z,1516402026.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:06.057Z,1516402026.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:06.446Z,1516402026.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:06.460Z,1516402026.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:06.845Z,1516402026.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:06.859Z,1516402026.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:07.246Z,1516402027.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:07.261Z,1516402027.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:07.639Z,1516402027.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:07.653Z,1516402027.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:08.036Z,1516402028.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:08.054Z,1516402028.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:08.442Z,1516402028.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:08.456Z,1516402028.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:08.843Z,1516402028.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:08.857Z,1516402028.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:09.243Z,1516402029.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:09.257Z,1516402029.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:09.618Z,1516402029.618 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T22:47:09.618Z,1516402029.618 [NAL9602] Data Fault, FailCount= 4
2018-01-19T22:47:09.618Z,1516402029.618 [NAL9602](ERROR): Data Fault
2018-01-19T22:47:09.654Z,1516402029.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:09.668Z,1516402029.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:09.697Z,1516402029.697 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T22:47:10.014Z,1516402030.014 [NAL9602](INFO): Powering down
2018-01-19T22:47:10.032Z,1516402030.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:10.067Z,1516402030.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:10.435Z,1516402030.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:10.460Z,1516402030.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:10.835Z,1516402030.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:10.860Z,1516402030.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:10.873Z,1516402030.873 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T22:47:10.873Z,1516402030.873 [NAL9602] No Fault, FailCount= 4
2018-01-19T22:47:11.231Z,1516402031.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:11.261Z,1516402031.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:11.628Z,1516402031.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:11.665Z,1516402031.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:12.034Z,1516402032.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:12.059Z,1516402032.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:12.430Z,1516402032.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:12.460Z,1516402032.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:12.828Z,1516402032.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:12.842Z,1516402032.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:13.235Z,1516402033.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:13.265Z,1516402033.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:13.635Z,1516402033.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:13.649Z,1516402033.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:14.032Z,1516402034.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:14.046Z,1516402034.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:14.439Z,1516402034.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:14.473Z,1516402034.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:14.839Z,1516402034.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:14.853Z,1516402034.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:15.231Z,1516402035.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:15.245Z,1516402035.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:15.643Z,1516402035.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:15.683Z,1516402035.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:16.039Z,1516402036.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:16.059Z,1516402036.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:16.431Z,1516402036.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:16.445Z,1516402036.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:16.839Z,1516402036.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:16.853Z,1516402036.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:17.239Z,1516402037.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:17.253Z,1516402037.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:17.631Z,1516402037.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:17.645Z,1516402037.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:18.039Z,1516402038.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:18.059Z,1516402038.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:18.439Z,1516402038.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:18.459Z,1516402038.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:18.836Z,1516402038.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:18.849Z,1516402038.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:19.236Z,1516402039.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:19.250Z,1516402039.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:19.636Z,1516402039.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:19.654Z,1516402039.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:20.040Z,1516402040.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:20.053Z,1516402040.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:20.436Z,1516402040.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:20.451Z,1516402040.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:20.841Z,1516402040.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:20.855Z,1516402040.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:21.240Z,1516402041.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:21.253Z,1516402041.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:21.637Z,1516402041.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:21.656Z,1516402041.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:22.040Z,1516402042.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:22.055Z,1516402042.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:22.441Z,1516402042.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:22.455Z,1516402042.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:22.841Z,1516402042.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:22.855Z,1516402042.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:23.237Z,1516402043.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:23.256Z,1516402043.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:23.641Z,1516402043.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:23.655Z,1516402043.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:24.041Z,1516402044.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:24.055Z,1516402044.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:24.439Z,1516402044.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:24.453Z,1516402044.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:24.837Z,1516402044.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:24.851Z,1516402044.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:25.240Z,1516402045.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:25.259Z,1516402045.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:25.641Z,1516402045.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:25.656Z,1516402045.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:26.042Z,1516402046.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:26.055Z,1516402046.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:26.436Z,1516402046.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:26.450Z,1516402046.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:26.842Z,1516402046.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:26.856Z,1516402046.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:27.235Z,1516402047.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:27.250Z,1516402047.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:27.635Z,1516402047.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:27.650Z,1516402047.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:28.040Z,1516402048.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:28.056Z,1516402048.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:28.440Z,1516402048.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:28.455Z,1516402048.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:28.836Z,1516402048.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:28.851Z,1516402048.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:29.240Z,1516402049.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:29.259Z,1516402049.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:29.640Z,1516402049.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:29.654Z,1516402049.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:30.036Z,1516402050.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:30.051Z,1516402050.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:30.441Z,1516402050.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:30.455Z,1516402050.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:30.840Z,1516402050.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:30.854Z,1516402050.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:31.236Z,1516402051.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:31.251Z,1516402051.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:31.640Z,1516402051.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:31.659Z,1516402051.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:32.037Z,1516402052.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:32.051Z,1516402052.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:32.442Z,1516402052.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:32.457Z,1516402052.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:32.843Z,1516402052.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:32.863Z,1516402052.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:33.243Z,1516402053.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:33.257Z,1516402053.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:33.637Z,1516402053.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:33.651Z,1516402053.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:34.039Z,1516402054.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:34.053Z,1516402054.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:34.434Z,1516402054.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:34.449Z,1516402054.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:34.836Z,1516402054.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:34.851Z,1516402054.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:35.237Z,1516402055.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:35.256Z,1516402055.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:35.642Z,1516402055.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:35.656Z,1516402055.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:36.042Z,1516402056.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:36.057Z,1516402056.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:36.442Z,1516402056.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:36.456Z,1516402056.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:36.842Z,1516402056.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:36.856Z,1516402056.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:37.236Z,1516402057.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:37.250Z,1516402057.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:37.637Z,1516402057.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:37.655Z,1516402057.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:38.034Z,1516402058.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:38.048Z,1516402058.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:38.434Z,1516402058.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:38.449Z,1516402058.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:38.838Z,1516402058.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:38.853Z,1516402058.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:39.235Z,1516402059.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:39.249Z,1516402059.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:42.309Z,1516402062.309 [NAL9602](INFO): Powering up NAL9602
2018-01-19T22:47:42.339Z,1516402062.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:42.353Z,1516402062.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:42.448Z,1516402062.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:42.488Z,1516402062.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:42.804Z,1516402062.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:42.818Z,1516402062.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:43.199Z,1516402063.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:43.213Z,1516402063.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:43.607Z,1516402063.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:43.640Z,1516402063.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:44.004Z,1516402064.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:44.041Z,1516402064.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:44.400Z,1516402064.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:44.413Z,1516402064.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:44.807Z,1516402064.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:44.840Z,1516402064.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:45.204Z,1516402065.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:45.240Z,1516402065.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:45.596Z,1516402065.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:45.610Z,1516402065.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:46.007Z,1516402066.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:46.040Z,1516402066.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:46.404Z,1516402066.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:46.439Z,1516402066.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:46.800Z,1516402066.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:46.813Z,1516402066.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:47.200Z,1516402067.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:47.215Z,1516402067.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:47.603Z,1516402067.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:47.643Z,1516402067.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:47.000Z,1516402068.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:48.013Z,1516402068.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:48.407Z,1516402068.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:48.440Z,1516402068.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:48.804Z,1516402068.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:48.839Z,1516402068.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:49.198Z,1516402069.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:49.212Z,1516402069.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:49.607Z,1516402069.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:49.646Z,1516402069.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:50.003Z,1516402070.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:50.023Z,1516402070.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:50.399Z,1516402070.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:50.413Z,1516402070.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:50.807Z,1516402070.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:50.843Z,1516402070.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:51.207Z,1516402071.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:51.227Z,1516402071.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:51.600Z,1516402071.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:51.613Z,1516402071.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:52.007Z,1516402072.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:52.027Z,1516402072.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:52.407Z,1516402072.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:52.427Z,1516402072.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:52.810Z,1516402072.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:52.824Z,1516402072.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:53.187Z,1516402073.187 [NAL9602](INFO): NAL9602 initialized
2018-01-19T22:47:53.205Z,1516402073.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:53.219Z,1516402073.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:53.604Z,1516402073.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:53.623Z,1516402073.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:54.006Z,1516402074.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:54.020Z,1516402074.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:54.422Z,1516402074.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:54.452Z,1516402074.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:54.822Z,1516402074.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:54.852Z,1516402074.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:55.204Z,1516402075.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:55.218Z,1516402075.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:55.609Z,1516402075.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:55.623Z,1516402075.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:56.006Z,1516402076.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:56.020Z,1516402076.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:56.410Z,1516402076.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:56.424Z,1516402076.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:56.818Z,1516402076.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:56.832Z,1516402076.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:57.222Z,1516402077.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:57.236Z,1516402077.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:57.619Z,1516402077.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:57.633Z,1516402077.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:58.012Z,1516402078.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:58.027Z,1516402078.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:58.412Z,1516402078.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:58.426Z,1516402078.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:58.810Z,1516402078.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:58.824Z,1516402078.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:59.208Z,1516402079.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:59.226Z,1516402079.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:47:59.610Z,1516402079.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:47:59.624Z,1516402079.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:00.018Z,1516402080.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:00.032Z,1516402080.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:00.418Z,1516402080.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:00.432Z,1516402080.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:00.819Z,1516402080.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:00.833Z,1516402080.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:01.213Z,1516402081.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:01.227Z,1516402081.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:01.612Z,1516402081.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:01.627Z,1516402081.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:02.006Z,1516402082.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:02.026Z,1516402082.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:02.411Z,1516402082.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:02.427Z,1516402082.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:02.818Z,1516402082.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:02.833Z,1516402082.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:03.222Z,1516402083.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:03.242Z,1516402083.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:03.606Z,1516402083.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:03.639Z,1516402083.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:04.003Z,1516402084.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:04.030Z,1516402084.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:04.399Z,1516402084.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:04.430Z,1516402084.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:04.795Z,1516402084.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:04.831Z,1516402084.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:05.204Z,1516402085.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:05.229Z,1516402085.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:05.599Z,1516402085.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:05.630Z,1516402085.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:06.020Z,1516402086.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:06.034Z,1516402086.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:06.422Z,1516402086.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:06.436Z,1516402086.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:06.826Z,1516402086.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:06.841Z,1516402086.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:07.196Z,1516402087.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:07.230Z,1516402087.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:07.600Z,1516402087.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:07.635Z,1516402087.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:08.001Z,1516402088.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:08.015Z,1516402088.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:08.405Z,1516402088.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:08.419Z,1516402088.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:08.811Z,1516402088.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:08.842Z,1516402088.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:09.223Z,1516402089.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:09.251Z,1516402089.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:09.619Z,1516402089.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:09.641Z,1516402089.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:10.007Z,1516402090.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:10.023Z,1516402090.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:10.407Z,1516402090.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:10.443Z,1516402090.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:10.807Z,1516402090.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:10.821Z,1516402090.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:11.205Z,1516402091.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:11.220Z,1516402091.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:11.608Z,1516402091.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:11.627Z,1516402091.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:12.018Z,1516402092.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:12.050Z,1516402092.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:12.418Z,1516402092.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:12.448Z,1516402092.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:12.822Z,1516402092.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:12.843Z,1516402092.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:13.204Z,1516402093.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:13.238Z,1516402093.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:13.607Z,1516402093.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:13.627Z,1516402093.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:14.006Z,1516402094.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:14.020Z,1516402094.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:14.404Z,1516402094.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:14.438Z,1516402094.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:14.818Z,1516402094.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:14.840Z,1516402094.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:15.222Z,1516402095.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:15.252Z,1516402095.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:15.622Z,1516402095.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:15.653Z,1516402095.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:16.005Z,1516402096.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:16.027Z,1516402096.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:16.405Z,1516402096.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:16.419Z,1516402096.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:16.808Z,1516402096.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:16.822Z,1516402096.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:17.211Z,1516402097.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:17.225Z,1516402097.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:17.608Z,1516402097.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:17.627Z,1516402097.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:18.018Z,1516402098.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:18.032Z,1516402098.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:18.410Z,1516402098.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:18.424Z,1516402098.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:18.822Z,1516402098.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:18.852Z,1516402098.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:19.204Z,1516402099.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:19.230Z,1516402099.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:19.602Z,1516402099.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:19.616Z,1516402099.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:20.007Z,1516402100.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:20.027Z,1516402100.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:20.411Z,1516402100.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:20.425Z,1516402100.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:20.806Z,1516402100.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:20.821Z,1516402100.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:21.222Z,1516402101.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:21.252Z,1516402101.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:21.622Z,1516402101.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:21.636Z,1516402101.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:22.009Z,1516402102.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:22.023Z,1516402102.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:22.403Z,1516402102.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:22.425Z,1516402102.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:22.812Z,1516402102.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:22.825Z,1516402102.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:23.211Z,1516402103.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:23.231Z,1516402103.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:23.610Z,1516402103.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:23.624Z,1516402103.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:24.018Z,1516402104.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:24.032Z,1516402104.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:24.413Z,1516402104.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:24.435Z,1516402104.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:24.814Z,1516402104.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:24.828Z,1516402104.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:25.215Z,1516402105.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:25.229Z,1516402105.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:25.600Z,1516402105.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:25.631Z,1516402105.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:26.010Z,1516402106.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:26.025Z,1516402106.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:26.408Z,1516402106.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:26.422Z,1516402106.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:26.816Z,1516402106.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:26.854Z,1516402106.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:27.218Z,1516402107.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:27.232Z,1516402107.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:27.617Z,1516402107.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:27.631Z,1516402107.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:28.012Z,1516402108.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:28.027Z,1516402108.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:28.410Z,1516402108.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:28.424Z,1516402108.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:28.815Z,1516402108.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:28.829Z,1516402108.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:29.217Z,1516402109.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:29.239Z,1516402109.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:29.617Z,1516402109.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:29.631Z,1516402109.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:30.016Z,1516402110.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:30.030Z,1516402110.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:30.414Z,1516402110.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:30.428Z,1516402110.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:30.818Z,1516402110.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:30.832Z,1516402110.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:31.217Z,1516402111.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:31.231Z,1516402111.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:31.620Z,1516402111.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:31.634Z,1516402111.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:32.016Z,1516402112.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:32.030Z,1516402112.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:32.406Z,1516402112.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:32.420Z,1516402112.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:32.817Z,1516402112.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:32.831Z,1516402112.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:33.220Z,1516402113.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:33.234Z,1516402113.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:33.618Z,1516402113.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:33.632Z,1516402113.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:34.005Z,1516402114.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:34.024Z,1516402114.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:34.405Z,1516402114.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:34.426Z,1516402114.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:34.818Z,1516402114.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:34.831Z,1516402114.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:35.216Z,1516402115.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:35.243Z,1516402115.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:35.622Z,1516402115.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:35.636Z,1516402115.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:36.015Z,1516402116.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:36.028Z,1516402116.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:36.416Z,1516402116.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:36.431Z,1516402116.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:36.824Z,1516402116.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:36.840Z,1516402116.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:37.220Z,1516402117.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:37.239Z,1516402117.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:37.619Z,1516402117.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:37.634Z,1516402117.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:38.007Z,1516402118.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:38.035Z,1516402118.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:38.418Z,1516402118.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:38.431Z,1516402118.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:38.823Z,1516402118.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:38.843Z,1516402118.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:39.227Z,1516402119.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:39.241Z,1516402119.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:39.626Z,1516402119.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:39.639Z,1516402119.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:42.699Z,1516402122.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:42.721Z,1516402122.721 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:42.721Z,1516402122.721 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-01-19T22:48:42.721Z,1516402122.721 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:48:42.723Z,1516402122.723 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:42.723Z,1516402122.723 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-01-19T22:48:42.723Z,1516402122.723 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:48:42.725Z,1516402122.725 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:42.725Z,1516402122.725 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2018-01-19T22:48:42.725Z,1516402122.725 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:48:42.737Z,1516402122.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:48:42.737Z,1516402122.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:48:42.737Z,1516402122.737 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:48:42.830Z,1516402122.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:42.884Z,1516402122.884 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:48:42.884Z,1516402122.884 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-01-19T22:48:42.889Z,1516402122.889 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:48:42.889Z,1516402122.889 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-01-19T22:48:42.890Z,1516402122.890 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:48:42.890Z,1516402122.890 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2018-01-19T22:48:43.198Z,1516402123.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:43.230Z,1516402123.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:48:43.230Z,1516402123.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:48:43.231Z,1516402123.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:48:43.231Z,1516402123.231 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:48:43.232Z,1516402123.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:48:43.232Z,1516402123.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:48:43.232Z,1516402123.232 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:48:43.233Z,1516402123.233 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:48:43.233Z,1516402123.233 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:48:43.593Z,1516402123.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:43.638Z,1516402123.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-01-19T22:48:43.639Z,1516402123.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:43.988Z,1516402123.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:44.005Z,1516402124.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-01-19T22:48:44.006Z,1516402124.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:44.378Z,1516402124.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:44.407Z,1516402124.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-01-19T22:48:44.408Z,1516402124.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:44.773Z,1516402124.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:44.840Z,1516402124.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-01-19T22:48:44.841Z,1516402124.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:45.194Z,1516402125.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:45.216Z,1516402125.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-01-19T22:48:45.221Z,1516402125.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:45.573Z,1516402125.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:45.611Z,1516402125.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-01-19T22:48:45.612Z,1516402125.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:45.994Z,1516402125.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:46.020Z,1516402126.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-01-19T22:48:46.021Z,1516402126.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:46.424Z,1516402126.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:46.480Z,1516402126.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-01-19T22:48:46.485Z,1516402126.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:46.784Z,1516402126.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:46.831Z,1516402126.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-01-19T22:48:46.832Z,1516402126.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:47.180Z,1516402127.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:47.219Z,1516402127.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-01-19T22:48:47.220Z,1516402127.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:47.582Z,1516402127.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:47.623Z,1516402127.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-01-19T22:48:47.624Z,1516402127.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:47.976Z,1516402127.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:48.070Z,1516402128.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-01-19T22:48:48.071Z,1516402128.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:48.376Z,1516402128.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:48.413Z,1516402128.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-01-19T22:48:48.414Z,1516402128.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:48.773Z,1516402128.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:48.796Z,1516402128.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-01-19T22:48:48.821Z,1516402128.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:49.197Z,1516402129.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:49.244Z,1516402129.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-01-19T22:48:49.270Z,1516402129.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:49.592Z,1516402129.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:49.642Z,1516402129.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-01-19T22:48:49.643Z,1516402129.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:49.992Z,1516402129.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:50.035Z,1516402130.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-01-19T22:48:50.036Z,1516402130.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:50.377Z,1516402130.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:50.408Z,1516402130.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-01-19T22:48:50.417Z,1516402130.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:50.782Z,1516402130.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:50.795Z,1516402130.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-01-19T22:48:50.796Z,1516402130.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:51.174Z,1516402131.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:51.212Z,1516402131.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-01-19T22:48:51.222Z,1516402131.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:51.591Z,1516402131.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:51.607Z,1516402131.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-01-19T22:48:51.607Z,1516402131.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:51.995Z,1516402131.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:52.018Z,1516402132.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-01-19T22:48:52.019Z,1516402132.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:52.390Z,1516402132.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:52.404Z,1516402132.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-01-19T22:48:52.405Z,1516402132.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:52.790Z,1516402132.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:52.804Z,1516402132.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-01-19T22:48:52.805Z,1516402132.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:53.167Z,1516402133.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:53.201Z,1516402133.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-01-19T22:48:53.202Z,1516402133.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:53.583Z,1516402133.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:53.603Z,1516402133.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-01-19T22:48:53.603Z,1516402133.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:53.988Z,1516402133.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:54.002Z,1516402134.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-01-19T22:48:54.003Z,1516402134.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:54.372Z,1516402134.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:54.398Z,1516402134.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-01-19T22:48:54.399Z,1516402134.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:54.769Z,1516402134.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:54.795Z,1516402134.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-01-19T22:48:54.796Z,1516402134.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:55.190Z,1516402135.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:55.204Z,1516402135.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-01-19T22:48:55.205Z,1516402135.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:55.591Z,1516402135.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:55.605Z,1516402135.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-01-19T22:48:55.606Z,1516402135.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:55.986Z,1516402135.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:56.007Z,1516402136.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-01-19T22:48:56.008Z,1516402136.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:56.375Z,1516402136.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:56.400Z,1516402136.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-01-19T22:48:56.401Z,1516402136.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:56.766Z,1516402136.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:56.803Z,1516402136.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-01-19T22:48:56.804Z,1516402136.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:57.168Z,1516402137.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:57.190Z,1516402137.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-01-19T22:48:57.191Z,1516402137.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:57.571Z,1516402137.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:57.606Z,1516402137.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-19T22:48:57.607Z,1516402137.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:57.982Z,1516402137.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:58.019Z,1516402138.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-01-19T22:48:58.019Z,1516402138.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:58.386Z,1516402138.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:58.422Z,1516402138.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-19T22:48:58.423Z,1516402138.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:58.818Z,1516402138.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:58.854Z,1516402138.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-19T22:48:58.855Z,1516402138.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:59.179Z,1516402139.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:59.209Z,1516402139.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-01-19T22:48:59.210Z,1516402139.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:59.567Z,1516402139.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:59.593Z,1516402139.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-01-19T22:48:59.594Z,1516402139.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:48:59.980Z,1516402139.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:48:59.998Z,1516402139.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-01-19T22:48:59.999Z,1516402139.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:00.381Z,1516402140.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:00.394Z,1516402140.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-01-19T22:49:00.395Z,1516402140.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:00.776Z,1516402140.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:00.794Z,1516402140.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-19T22:49:00.795Z,1516402140.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:01.194Z,1516402141.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:01.223Z,1516402141.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-19T22:49:01.224Z,1516402141.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:01.590Z,1516402141.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:01.603Z,1516402141.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-19T22:49:01.604Z,1516402141.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:01.982Z,1516402141.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:01.996Z,1516402141.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-19T22:49:01.997Z,1516402141.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:02.377Z,1516402142.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:02.395Z,1516402142.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-19T22:49:02.396Z,1516402142.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:02.776Z,1516402142.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:02.790Z,1516402142.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:03.181Z,1516402143.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:03.195Z,1516402143.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:03.578Z,1516402143.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:03.593Z,1516402143.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:03.986Z,1516402143.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:04.000Z,1516402144.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:04.390Z,1516402144.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:04.405Z,1516402144.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:04.786Z,1516402144.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:04.800Z,1516402144.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:05.173Z,1516402145.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:05.199Z,1516402145.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:05.583Z,1516402145.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:05.597Z,1516402145.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:05.983Z,1516402145.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:05.997Z,1516402145.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:06.376Z,1516402146.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:06.390Z,1516402146.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:06.776Z,1516402146.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:06.794Z,1516402146.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:07.184Z,1516402147.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:07.203Z,1516402147.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:07.585Z,1516402147.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:07.599Z,1516402147.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:07.984Z,1516402147.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:08.003Z,1516402148.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:08.379Z,1516402148.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:08.393Z,1516402148.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:08.776Z,1516402148.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:08.794Z,1516402148.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:09.183Z,1516402149.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:09.197Z,1516402149.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:09.579Z,1516402149.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:09.593Z,1516402149.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:09.985Z,1516402149.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:10.007Z,1516402150.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:10.390Z,1516402150.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:10.405Z,1516402150.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:10.785Z,1516402150.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:10.807Z,1516402150.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:11.185Z,1516402151.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:11.198Z,1516402151.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:11.584Z,1516402151.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:11.603Z,1516402151.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:11.636Z,1516402151.636 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T22:49:11.984Z,1516402151.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:11.998Z,1516402151.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:12.377Z,1516402152.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:12.391Z,1516402152.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:12.776Z,1516402152.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:12.803Z,1516402152.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:13.194Z,1516402153.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:13.208Z,1516402153.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:13.594Z,1516402153.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:13.608Z,1516402153.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:13.982Z,1516402153.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:14.005Z,1516402154.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:14.375Z,1516402154.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:14.399Z,1516402154.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:14.768Z,1516402154.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:14.795Z,1516402154.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:15.168Z,1516402155.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:15.199Z,1516402155.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:15.583Z,1516402155.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:15.601Z,1516402155.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:15.992Z,1516402155.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:16.006Z,1516402156.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:16.391Z,1516402156.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:16.406Z,1516402156.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:16.791Z,1516402156.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:16.807Z,1516402156.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:17.184Z,1516402157.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:17.199Z,1516402157.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:17.583Z,1516402157.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:17.600Z,1516402157.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:17.971Z,1516402157.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:18.003Z,1516402158.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:18.368Z,1516402158.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:18.399Z,1516402158.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:18.769Z,1516402158.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:18.803Z,1516402158.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:19.190Z,1516402159.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:19.205Z,1516402159.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:19.595Z,1516402159.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:19.615Z,1516402159.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:19.982Z,1516402159.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:20.004Z,1516402160.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:20.372Z,1516402160.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:20.398Z,1516402160.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:20.768Z,1516402160.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:20.804Z,1516402160.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:21.187Z,1516402161.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:21.201Z,1516402161.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:21.572Z,1516402161.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:21.597Z,1516402161.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:21.990Z,1516402161.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:22.016Z,1516402162.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:22.398Z,1516402162.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:22.412Z,1516402162.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:22.790Z,1516402162.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:22.804Z,1516402162.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:23.167Z,1516402163.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:23.205Z,1516402163.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:23.575Z,1516402163.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:23.602Z,1516402163.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:24.001Z,1516402164.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:24.016Z,1516402164.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:24.368Z,1516402164.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:24.400Z,1516402164.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:24.769Z,1516402164.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:24.791Z,1516402164.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:25.190Z,1516402165.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:25.206Z,1516402165.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:25.592Z,1516402165.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:25.607Z,1516402165.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:25.986Z,1516402165.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:26.007Z,1516402166.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:26.371Z,1516402166.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:26.402Z,1516402166.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:26.767Z,1516402166.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:26.803Z,1516402166.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:27.176Z,1516402167.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:27.201Z,1516402167.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:27.571Z,1516402167.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:27.602Z,1516402167.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:27.991Z,1516402167.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:28.006Z,1516402168.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:28.398Z,1516402168.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:28.419Z,1516402168.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:28.790Z,1516402168.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:28.804Z,1516402168.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:29.167Z,1516402169.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:29.203Z,1516402169.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:29.575Z,1516402169.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:29.601Z,1516402169.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:29.979Z,1516402169.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:30.004Z,1516402170.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:30.372Z,1516402170.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:30.403Z,1516402170.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:30.769Z,1516402170.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:30.791Z,1516402170.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:31.202Z,1516402171.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:31.216Z,1516402171.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:31.582Z,1516402171.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:31.608Z,1516402171.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:31.982Z,1516402171.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:32.014Z,1516402172.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:32.375Z,1516402172.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:32.406Z,1516402172.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:32.771Z,1516402172.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:32.801Z,1516402172.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:33.176Z,1516402173.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:33.211Z,1516402173.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:33.575Z,1516402173.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:33.611Z,1516402173.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:33.986Z,1516402173.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:34.019Z,1516402174.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:34.386Z,1516402174.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:34.416Z,1516402174.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:34.790Z,1516402174.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:34.820Z,1516402174.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:35.177Z,1516402175.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:35.191Z,1516402175.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:35.580Z,1516402175.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:35.595Z,1516402175.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:35.981Z,1516402175.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:35.995Z,1516402175.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:36.381Z,1516402176.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:36.402Z,1516402176.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:36.772Z,1516402176.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:36.786Z,1516402176.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:37.186Z,1516402177.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:37.200Z,1516402177.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:37.594Z,1516402177.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:37.625Z,1516402177.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:37.978Z,1516402177.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:37.992Z,1516402177.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:38.387Z,1516402178.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:38.407Z,1516402178.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:38.780Z,1516402178.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:38.795Z,1516402178.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:39.183Z,1516402179.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:39.197Z,1516402179.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:39.579Z,1516402179.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:39.593Z,1516402179.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:39.998Z,1516402179.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:40.029Z,1516402180.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:43.087Z,1516402183.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:43.102Z,1516402183.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:43.219Z,1516402183.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:43.251Z,1516402183.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:43.554Z,1516402183.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:43.568Z,1516402183.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:43.960Z,1516402183.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:43.973Z,1516402183.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:44.357Z,1516402184.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:44.371Z,1516402184.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:44.752Z,1516402184.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:44.771Z,1516402184.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:45.166Z,1516402185.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:45.197Z,1516402185.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:45.566Z,1516402185.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:45.596Z,1516402185.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:45.970Z,1516402185.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:45.991Z,1516402185.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:46.350Z,1516402186.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:46.376Z,1516402186.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:46.754Z,1516402186.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:46.768Z,1516402186.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:47.155Z,1516402187.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:47.175Z,1516402187.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:47.553Z,1516402187.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:47.567Z,1516402187.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:47.955Z,1516402187.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:47.969Z,1516402187.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:48.370Z,1516402188.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:48.391Z,1516402188.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:48.782Z,1516402188.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:48.816Z,1516402188.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:49.142Z,1516402189.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:49.177Z,1516402189.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:49.554Z,1516402189.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:49.575Z,1516402189.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:49.944Z,1516402189.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:49.980Z,1516402189.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:50.363Z,1516402190.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:50.383Z,1516402190.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:50.761Z,1516402190.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:50.775Z,1516402190.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:51.167Z,1516402191.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:51.183Z,1516402191.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:51.570Z,1516402191.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:51.584Z,1516402191.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:51.970Z,1516402191.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:51.991Z,1516402191.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:52.359Z,1516402192.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:52.374Z,1516402192.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:52.741Z,1516402192.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:52.776Z,1516402192.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:53.151Z,1516402193.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:53.174Z,1516402193.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:53.556Z,1516402193.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:53.574Z,1516402193.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:53.958Z,1516402193.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:53.987Z,1516402193.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:54.369Z,1516402194.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:54.391Z,1516402194.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:54.770Z,1516402194.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:54.783Z,1516402194.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:55.154Z,1516402195.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:55.171Z,1516402195.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:55.551Z,1516402195.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:55.573Z,1516402195.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:55.956Z,1516402195.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:55.980Z,1516402195.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:56.361Z,1516402196.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:56.375Z,1516402196.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:56.750Z,1516402196.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:56.772Z,1516402196.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:57.171Z,1516402197.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:57.190Z,1516402197.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:57.573Z,1516402197.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:57.595Z,1516402197.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:57.970Z,1516402197.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:57.991Z,1516402197.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:58.351Z,1516402198.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:58.378Z,1516402198.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:58.745Z,1516402198.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:58.772Z,1516402198.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:59.152Z,1516402199.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:59.177Z,1516402199.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:59.543Z,1516402199.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:59.598Z,1516402199.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:49:59.954Z,1516402199.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:49:59.987Z,1516402199.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:00.374Z,1516402200.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:00.388Z,1516402200.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:00.769Z,1516402200.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:00.783Z,1516402200.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:01.152Z,1516402201.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:01.177Z,1516402201.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:01.547Z,1516402201.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:01.582Z,1516402201.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:01.954Z,1516402201.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:01.987Z,1516402201.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:02.374Z,1516402202.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:02.388Z,1516402202.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:02.770Z,1516402202.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:02.784Z,1516402202.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:03.144Z,1516402203.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:03.179Z,1516402203.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:03.551Z,1516402203.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:03.576Z,1516402203.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:03.962Z,1516402203.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:03.983Z,1516402203.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:04.367Z,1516402204.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:04.381Z,1516402204.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:04.766Z,1516402204.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:04.780Z,1516402204.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:05.148Z,1516402205.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:05.178Z,1516402205.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:05.543Z,1516402205.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:05.579Z,1516402205.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:05.958Z,1516402205.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:05.993Z,1516402205.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:06.367Z,1516402206.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:06.387Z,1516402206.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:06.770Z,1516402206.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:06.784Z,1516402206.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:07.152Z,1516402207.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:07.177Z,1516402207.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:07.547Z,1516402207.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:07.574Z,1516402207.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:07.971Z,1516402207.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:07.985Z,1516402207.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:08.374Z,1516402208.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:08.388Z,1516402208.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:08.758Z,1516402208.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:08.795Z,1516402208.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:09.152Z,1516402209.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:09.190Z,1516402209.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:09.545Z,1516402209.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:09.559Z,1516402209.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:09.976Z,1516402209.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:09.990Z,1516402209.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:10.377Z,1516402210.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:10.399Z,1516402210.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:10.762Z,1516402210.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:10.785Z,1516402210.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:11.160Z,1516402211.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:11.188Z,1516402211.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:11.556Z,1516402211.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:11.591Z,1516402211.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:11.954Z,1516402211.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:11.977Z,1516402211.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:12.370Z,1516402212.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:12.399Z,1516402212.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:12.766Z,1516402212.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:12.794Z,1516402212.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:13.149Z,1516402213.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:13.163Z,1516402213.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:13.552Z,1516402213.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:13.571Z,1516402213.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:13.966Z,1516402213.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:13.997Z,1516402213.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:14.370Z,1516402214.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:14.400Z,1516402214.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:14.770Z,1516402214.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:14.799Z,1516402214.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:15.156Z,1516402215.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:15.171Z,1516402215.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:15.552Z,1516402215.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:15.566Z,1516402215.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:15.958Z,1516402215.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:15.973Z,1516402215.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:16.370Z,1516402216.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:16.400Z,1516402216.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:16.761Z,1516402216.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:16.776Z,1516402216.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:17.154Z,1516402217.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:17.173Z,1516402217.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:17.556Z,1516402217.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:17.571Z,1516402217.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:17.956Z,1516402217.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:17.987Z,1516402217.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:18.366Z,1516402218.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:18.380Z,1516402218.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:18.766Z,1516402218.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:18.780Z,1516402218.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:19.160Z,1516402219.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:19.175Z,1516402219.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:19.559Z,1516402219.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:19.579Z,1516402219.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:19.966Z,1516402219.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:19.980Z,1516402219.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:20.366Z,1516402220.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:20.380Z,1516402220.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:20.764Z,1516402220.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:20.783Z,1516402220.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:21.161Z,1516402221.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:21.176Z,1516402221.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:21.559Z,1516402221.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:21.579Z,1516402221.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:21.965Z,1516402221.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:21.979Z,1516402221.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:22.366Z,1516402222.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:22.380Z,1516402222.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:22.765Z,1516402222.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:22.787Z,1516402222.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:23.160Z,1516402223.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:23.174Z,1516402223.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:23.556Z,1516402223.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:23.570Z,1516402223.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:23.959Z,1516402223.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:23.991Z,1516402223.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:24.369Z,1516402224.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:24.391Z,1516402224.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:24.767Z,1516402224.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:24.781Z,1516402224.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:25.144Z,1516402225.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:25.178Z,1516402225.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:25.560Z,1516402225.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:25.575Z,1516402225.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:25.970Z,1516402225.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:25.991Z,1516402225.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:26.369Z,1516402226.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:26.391Z,1516402226.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:26.771Z,1516402226.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:26.791Z,1516402226.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:27.160Z,1516402227.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:27.174Z,1516402227.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:27.564Z,1516402227.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:27.583Z,1516402227.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:27.970Z,1516402227.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:27.985Z,1516402227.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:28.367Z,1516402228.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:28.382Z,1516402228.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:28.770Z,1516402228.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:28.791Z,1516402228.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:29.163Z,1516402229.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:29.177Z,1516402229.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:29.543Z,1516402229.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:29.579Z,1516402229.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:29.972Z,1516402229.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:29.986Z,1516402229.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:30.374Z,1516402230.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:30.388Z,1516402230.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:30.772Z,1516402230.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:30.786Z,1516402230.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:31.160Z,1516402231.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:31.175Z,1516402231.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:31.563Z,1516402231.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:31.578Z,1516402231.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:31.967Z,1516402231.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:31.982Z,1516402231.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:32.366Z,1516402232.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:32.380Z,1516402232.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:32.762Z,1516402232.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:32.784Z,1516402232.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:33.160Z,1516402233.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:33.174Z,1516402233.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:33.543Z,1516402233.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:33.579Z,1516402233.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:33.971Z,1516402233.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:33.986Z,1516402233.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:34.375Z,1516402234.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:34.389Z,1516402234.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:34.771Z,1516402234.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:34.791Z,1516402234.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:35.152Z,1516402235.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:35.178Z,1516402235.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:35.547Z,1516402235.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:35.575Z,1516402235.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:35.970Z,1516402235.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:35.985Z,1516402235.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:36.374Z,1516402236.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:36.388Z,1516402236.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:36.770Z,1516402236.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:36.784Z,1516402236.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:37.143Z,1516402237.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:37.174Z,1516402237.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:37.548Z,1516402237.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:37.578Z,1516402237.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:37.947Z,1516402237.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:37.979Z,1516402237.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:38.370Z,1516402238.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:38.384Z,1516402238.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:38.774Z,1516402238.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:38.795Z,1516402238.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:38.798Z,1516402238.798 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T22:45:38.5Z
2018-01-19T22:50:38.798Z,1516402238.798 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T22:50:38.798Z,1516402238.798 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T22:50:39.170Z,1516402239.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:39.184Z,1516402239.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:39.595Z,1516402239.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:39.624Z,1516402239.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:39.948Z,1516402239.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:39.974Z,1516402239.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:43.048Z,1516402243.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:43.072Z,1516402243.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:43.149Z,1516402243.149 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0040.lzma
2018-01-19T22:50:43.179Z,1516402243.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:43.216Z,1516402243.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:43.530Z,1516402243.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:43.544Z,1516402243.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:44.700Z,1516402244.700 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0040.lzma.bak
2018-01-19T22:50:44.701Z,1516402244.701 [DataOverHttps](INFO): SBD MOMSN=7724643
2018-01-19T22:50:44.750Z,1516402244.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:44.772Z,1516402244.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:44.975Z,1516402244.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:45.018Z,1516402245.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:45.229Z,1516402245.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:45.243Z,1516402245.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:48.326Z,1516402248.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:48.340Z,1516402248.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:48.437Z,1516402248.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:48.478Z,1516402248.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:48.830Z,1516402248.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:48.844Z,1516402248.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:49.246Z,1516402249.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:49.266Z,1516402249.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:49.626Z,1516402249.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:49.660Z,1516402249.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:50.024Z,1516402250.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:50.050Z,1516402250.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:53.121Z,1516402253.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:53.147Z,1516402253.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:53.221Z,1516402253.221 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180119T210901/Express0041.lzma
2018-01-19T22:50:53.253Z,1516402253.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:53.294Z,1516402253.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:53.610Z,1516402253.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:53.647Z,1516402253.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:53.975Z,1516402253.975 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0041.lzma.bak
2018-01-19T22:50:53.975Z,1516402253.975 [DataOverHttps](INFO): SBD MOMSN=7724645
2018-01-19T22:50:54.026Z,1516402254.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:54.050Z,1516402254.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:54.502Z,1516402254.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:54.519Z,1516402254.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:54.522Z,1516402254.522 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T22:50:54.522Z,1516402254.522 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T22:50:54.522Z,1516402254.522 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T22:50:54.801Z,1516402254.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:54.820Z,1516402254.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:57.910Z,1516402257.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:57.925Z,1516402257.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:58.024Z,1516402258.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:58.055Z,1516402258.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:58.401Z,1516402258.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:58.416Z,1516402258.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:58.802Z,1516402258.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:58.817Z,1516402258.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:59.190Z,1516402259.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:59.204Z,1516402259.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:59.571Z,1516402259.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:59.602Z,1516402259.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:50:59.971Z,1516402259.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:50:59.991Z,1516402259.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:00.380Z,1516402260.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:00.394Z,1516402260.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:00.779Z,1516402260.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:00.799Z,1516402260.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:01.190Z,1516402261.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:01.204Z,1516402261.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:01.594Z,1516402261.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:01.608Z,1516402261.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:01.986Z,1516402261.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:02.000Z,1516402262.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:02.380Z,1516402262.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:02.394Z,1516402262.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:02.783Z,1516402262.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:02.797Z,1516402262.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:03.182Z,1516402263.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:03.196Z,1516402263.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:03.584Z,1516402263.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:03.599Z,1516402263.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:03.979Z,1516402263.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:03.993Z,1516402263.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:04.385Z,1516402264.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:04.407Z,1516402264.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:04.790Z,1516402264.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:04.804Z,1516402264.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:05.185Z,1516402265.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:05.199Z,1516402265.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:05.580Z,1516402265.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:05.599Z,1516402265.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:05.981Z,1516402265.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:05.995Z,1516402265.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:06.384Z,1516402266.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:06.398Z,1516402266.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:06.784Z,1516402266.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:06.798Z,1516402266.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:07.186Z,1516402267.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:07.201Z,1516402267.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:07.590Z,1516402267.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:07.604Z,1516402267.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:07.987Z,1516402267.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:08.007Z,1516402268.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:08.386Z,1516402268.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:08.401Z,1516402268.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:08.779Z,1516402268.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:08.802Z,1516402268.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:09.187Z,1516402269.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:09.201Z,1516402269.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:09.569Z,1516402269.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:09.599Z,1516402269.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:09.976Z,1516402269.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:10.002Z,1516402270.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:10.393Z,1516402270.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:10.408Z,1516402270.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:10.790Z,1516402270.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:10.826Z,1516402270.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:11.196Z,1516402271.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:11.211Z,1516402271.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:11.580Z,1516402271.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:11.615Z,1516402271.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:11.976Z,1516402271.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:11.991Z,1516402271.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:12.381Z,1516402272.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:12.395Z,1516402272.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:12.773Z,1516402272.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:12.787Z,1516402272.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:13.190Z,1516402273.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:13.222Z,1516402273.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:13.594Z,1516402273.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:13.624Z,1516402273.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:13.995Z,1516402273.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:14.027Z,1516402274.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:14.375Z,1516402274.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:14.394Z,1516402274.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:14.780Z,1516402274.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:14.795Z,1516402274.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:15.180Z,1516402275.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:15.196Z,1516402275.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:15.577Z,1516402275.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:15.591Z,1516402275.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:15.976Z,1516402275.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:15.995Z,1516402275.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:16.394Z,1516402276.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:16.423Z,1516402276.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:16.794Z,1516402276.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:16.832Z,1516402276.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:17.190Z,1516402277.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:17.204Z,1516402277.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:17.580Z,1516402277.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:17.599Z,1516402277.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:17.979Z,1516402277.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:17.993Z,1516402277.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:18.381Z,1516402278.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:18.395Z,1516402278.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:18.780Z,1516402278.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:18.799Z,1516402278.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:19.194Z,1516402279.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:19.208Z,1516402279.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:19.594Z,1516402279.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:19.608Z,1516402279.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:19.986Z,1516402279.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:20.000Z,1516402280.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:20.376Z,1516402280.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:20.390Z,1516402280.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:20.783Z,1516402280.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:20.797Z,1516402280.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:21.179Z,1516402281.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:21.193Z,1516402281.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:21.577Z,1516402281.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:21.590Z,1516402281.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:22.006Z,1516402282.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:22.030Z,1516402282.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:22.384Z,1516402282.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:22.403Z,1516402282.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:22.790Z,1516402282.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:22.804Z,1516402282.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:23.186Z,1516402283.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:23.200Z,1516402283.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:23.579Z,1516402283.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:23.593Z,1516402283.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:23.980Z,1516402283.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:23.994Z,1516402283.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:24.374Z,1516402284.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:24.393Z,1516402284.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:24.779Z,1516402284.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:24.793Z,1516402284.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:25.185Z,1516402285.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:25.206Z,1516402285.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:25.584Z,1516402285.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:25.603Z,1516402285.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:25.986Z,1516402285.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:26.000Z,1516402286.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:26.383Z,1516402286.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:26.397Z,1516402286.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:26.783Z,1516402286.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:26.797Z,1516402286.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:27.183Z,1516402287.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:27.197Z,1516402287.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:27.576Z,1516402287.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:27.590Z,1516402287.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:27.979Z,1516402287.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:27.999Z,1516402287.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:28.384Z,1516402288.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:28.403Z,1516402288.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:28.790Z,1516402288.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:28.804Z,1516402288.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:29.186Z,1516402289.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:29.201Z,1516402289.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:29.579Z,1516402289.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:29.593Z,1516402289.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:29.980Z,1516402289.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:29.994Z,1516402289.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:30.383Z,1516402290.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:30.403Z,1516402290.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:30.779Z,1516402290.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:30.793Z,1516402290.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:31.185Z,1516402291.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:31.206Z,1516402291.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:31.590Z,1516402291.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:31.604Z,1516402291.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:31.986Z,1516402291.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:32.000Z,1516402292.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:32.376Z,1516402292.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:32.390Z,1516402292.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:32.783Z,1516402292.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:32.797Z,1516402292.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:33.178Z,1516402293.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:33.192Z,1516402293.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:33.577Z,1516402293.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:33.590Z,1516402293.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:33.983Z,1516402293.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:33.997Z,1516402293.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:34.386Z,1516402294.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:34.400Z,1516402294.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:34.790Z,1516402294.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:34.804Z,1516402294.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:35.186Z,1516402295.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:35.201Z,1516402295.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:35.583Z,1516402295.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:35.597Z,1516402295.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:35.984Z,1516402295.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:35.997Z,1516402295.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:36.383Z,1516402296.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:36.403Z,1516402296.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:36.782Z,1516402296.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:36.797Z,1516402296.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:37.186Z,1516402297.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:37.200Z,1516402297.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:37.600Z,1516402297.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:37.619Z,1516402297.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:37.994Z,1516402297.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:38.008Z,1516402298.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:38.366Z,1516402298.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:38.403Z,1516402298.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:38.773Z,1516402298.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:38.798Z,1516402298.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:39.171Z,1516402299.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:39.196Z,1516402299.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:39.568Z,1516402299.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:39.599Z,1516402299.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:39.975Z,1516402299.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:40.000Z,1516402300.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:40.390Z,1516402300.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:40.404Z,1516402300.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:40.791Z,1516402300.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:40.843Z,1516402300.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:41.194Z,1516402301.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:41.208Z,1516402301.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:41.571Z,1516402301.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:41.596Z,1516402301.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:41.971Z,1516402301.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:42.007Z,1516402302.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:42.376Z,1516402302.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:42.407Z,1516402302.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:42.771Z,1516402302.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:42.806Z,1516402302.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:43.178Z,1516402303.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:43.211Z,1516402303.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:43.595Z,1516402303.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:43.609Z,1516402303.609 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:43.609Z,1516402303.609 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-01-19T22:51:43.609Z,1516402303.609 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:51:43.611Z,1516402303.611 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:43.611Z,1516402303.611 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-01-19T22:51:43.611Z,1516402303.611 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:51:43.613Z,1516402303.613 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:43.613Z,1516402303.613 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2018-01-19T22:51:43.613Z,1516402303.613 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:51:43.625Z,1516402303.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:51:43.625Z,1516402303.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:51:43.626Z,1516402303.626 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:51:43.982Z,1516402303.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:44.025Z,1516402304.025 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:51:44.025Z,1516402304.025 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-01-19T22:51:44.025Z,1516402304.025 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:51:44.025Z,1516402304.025 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-01-19T22:51:44.026Z,1516402304.026 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:51:44.026Z,1516402304.026 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2018-01-19T22:51:44.371Z,1516402304.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:44.406Z,1516402304.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:51:44.406Z,1516402304.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:51:44.407Z,1516402304.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:51:44.407Z,1516402304.407 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:51:44.407Z,1516402304.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:51:44.408Z,1516402304.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:51:44.408Z,1516402304.408 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:51:44.408Z,1516402304.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:51:44.409Z,1516402304.409 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:51:44.780Z,1516402304.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:44.802Z,1516402304.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:51:44.803Z,1516402304.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:45.175Z,1516402305.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:45.210Z,1516402305.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:51:45.211Z,1516402305.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:45.580Z,1516402305.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:45.593Z,1516402305.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:51:45.594Z,1516402305.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:45.976Z,1516402305.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:45.990Z,1516402305.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:51:45.991Z,1516402305.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:46.390Z,1516402306.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:46.420Z,1516402306.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:51:46.425Z,1516402306.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:46.794Z,1516402306.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:46.826Z,1516402306.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:51:46.827Z,1516402306.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:47.182Z,1516402307.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:47.196Z,1516402307.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T22:51:47.197Z,1516402307.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:47.578Z,1516402307.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:47.596Z,1516402307.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T22:51:47.601Z,1516402307.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:47.987Z,1516402307.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:48.000Z,1516402308.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T22:51:48.001Z,1516402308.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:48.386Z,1516402308.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:48.400Z,1516402308.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T22:51:48.401Z,1516402308.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:48.785Z,1516402308.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:48.799Z,1516402308.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T22:51:48.800Z,1516402308.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:49.191Z,1516402309.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:49.205Z,1516402309.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T22:51:49.206Z,1516402309.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:49.591Z,1516402309.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:49.610Z,1516402309.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T22:51:49.611Z,1516402309.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:49.990Z,1516402309.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:50.004Z,1516402310.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T22:51:50.005Z,1516402310.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:50.377Z,1516402310.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:50.391Z,1516402310.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:51:50.392Z,1516402310.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:50.771Z,1516402310.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:50.794Z,1516402310.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:51:50.795Z,1516402310.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:51.175Z,1516402311.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:51.197Z,1516402311.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:51:51.198Z,1516402311.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:51.576Z,1516402311.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:51.591Z,1516402311.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:51:51.592Z,1516402311.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:51.974Z,1516402311.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:51.999Z,1516402311.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:51:51.000Z,1516402312.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:52.390Z,1516402312.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:52.403Z,1516402312.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:51:52.404Z,1516402312.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:52.790Z,1516402312.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:52.803Z,1516402312.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:51:52.804Z,1516402312.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:53.185Z,1516402313.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:53.200Z,1516402313.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T22:51:53.201Z,1516402313.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:53.583Z,1516402313.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:53.603Z,1516402313.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:51:53.604Z,1516402313.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:53.984Z,1516402313.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:53.997Z,1516402313.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:51:53.998Z,1516402313.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:54.384Z,1516402314.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:54.398Z,1516402314.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:51:54.399Z,1516402314.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:54.782Z,1516402314.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:54.802Z,1516402314.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:51:54.803Z,1516402314.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:55.189Z,1516402315.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:55.203Z,1516402315.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:51:55.204Z,1516402315.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:58.285Z,1516402318.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:58.299Z,1516402318.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-01-19T22:51:58.300Z,1516402318.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:58.426Z,1516402318.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:58.446Z,1516402318.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:51:58.447Z,1516402318.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:58.759Z,1516402318.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:58.787Z,1516402318.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:51:58.788Z,1516402318.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:59.155Z,1516402319.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:59.192Z,1516402319.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T22:51:59.193Z,1516402319.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:59.549Z,1516402319.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:59.586Z,1516402319.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T22:51:59.587Z,1516402319.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:51:59.954Z,1516402319.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:51:59.990Z,1516402319.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T22:51:59.991Z,1516402319.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:00.366Z,1516402320.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:00.398Z,1516402320.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T22:52:00.399Z,1516402320.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:00.762Z,1516402320.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:00.776Z,1516402320.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T22:52:00.793Z,1516402320.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:01.170Z,1516402321.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:01.199Z,1516402321.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T22:52:01.200Z,1516402321.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:01.557Z,1516402321.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:01.570Z,1516402321.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T22:52:01.571Z,1516402321.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:01.957Z,1516402321.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:01.971Z,1516402321.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T22:52:01.972Z,1516402321.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:02.357Z,1516402322.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:02.371Z,1516402322.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T22:52:02.372Z,1516402322.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:02.755Z,1516402322.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:02.768Z,1516402322.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T22:52:02.769Z,1516402322.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:03.166Z,1516402323.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:03.180Z,1516402323.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T22:52:03.193Z,1516402323.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:03.570Z,1516402323.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:03.584Z,1516402323.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T22:52:03.601Z,1516402323.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:03.964Z,1516402323.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:04.006Z,1516402324.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:04.359Z,1516402324.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:04.373Z,1516402324.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:04.754Z,1516402324.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:04.768Z,1516402324.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:05.160Z,1516402325.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:05.174Z,1516402325.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:05.559Z,1516402325.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:05.574Z,1516402325.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:05.954Z,1516402325.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:05.977Z,1516402325.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:06.366Z,1516402326.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:06.380Z,1516402326.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:06.766Z,1516402326.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:06.780Z,1516402326.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:07.164Z,1516402327.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:07.183Z,1516402327.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:07.560Z,1516402327.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:07.574Z,1516402327.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:07.963Z,1516402327.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:07.977Z,1516402327.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:08.355Z,1516402328.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:08.375Z,1516402328.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:08.760Z,1516402328.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:08.774Z,1516402328.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:09.165Z,1516402329.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:09.187Z,1516402329.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:09.567Z,1516402329.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:09.587Z,1516402329.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:09.961Z,1516402329.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:09.988Z,1516402329.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:10.360Z,1516402330.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:10.375Z,1516402330.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:10.759Z,1516402330.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:10.773Z,1516402330.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:11.165Z,1516402331.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:11.179Z,1516402331.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:11.569Z,1516402331.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:11.583Z,1516402331.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:11.969Z,1516402331.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:11.983Z,1516402331.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:12.361Z,1516402332.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:12.375Z,1516402332.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:12.761Z,1516402332.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:12.775Z,1516402332.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:13.166Z,1516402333.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:13.180Z,1516402333.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:13.569Z,1516402333.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:13.583Z,1516402333.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:13.969Z,1516402333.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:13.983Z,1516402333.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:14.363Z,1516402334.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:14.378Z,1516402334.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:14.761Z,1516402334.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:14.785Z,1516402334.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:15.167Z,1516402335.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:15.187Z,1516402335.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:15.568Z,1516402335.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:15.587Z,1516402335.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:15.974Z,1516402335.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:15.994Z,1516402335.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:16.359Z,1516402336.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:16.374Z,1516402336.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:16.757Z,1516402336.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:16.772Z,1516402336.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:17.167Z,1516402337.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:17.181Z,1516402337.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:17.571Z,1516402337.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:17.586Z,1516402337.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:17.968Z,1516402337.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:17.987Z,1516402337.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:18.363Z,1516402338.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:18.377Z,1516402338.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:18.759Z,1516402338.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:18.779Z,1516402338.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:19.168Z,1516402339.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:19.182Z,1516402339.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:19.572Z,1516402339.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:19.586Z,1516402339.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:19.971Z,1516402339.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:19.985Z,1516402339.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:20.357Z,1516402340.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:20.372Z,1516402340.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:20.744Z,1516402340.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:20.783Z,1516402340.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:21.170Z,1516402341.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:21.193Z,1516402341.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:21.573Z,1516402341.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:21.587Z,1516402341.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:21.975Z,1516402341.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:21.994Z,1516402341.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:22.347Z,1516402342.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:22.377Z,1516402342.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:22.758Z,1516402342.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:22.780Z,1516402342.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:23.176Z,1516402343.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:23.190Z,1516402343.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:23.574Z,1516402343.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:23.589Z,1516402343.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:23.970Z,1516402343.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:23.987Z,1516402343.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:24.367Z,1516402344.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:24.382Z,1516402344.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:24.747Z,1516402344.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:24.772Z,1516402344.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:25.176Z,1516402345.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:25.195Z,1516402345.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:25.582Z,1516402345.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:25.596Z,1516402345.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:25.963Z,1516402345.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:25.995Z,1516402345.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:26.351Z,1516402346.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:26.383Z,1516402346.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:26.755Z,1516402346.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:26.790Z,1516402346.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:27.158Z,1516402347.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:27.195Z,1516402347.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:27.576Z,1516402347.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:27.583Z,1516402347.583 [PNI_TCM](ERROR): CRC does not match. Expected:0x34973 got:0x66
2018-01-19T22:52:27.632Z,1516402347.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:27.961Z,1516402347.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:27.993Z,1516402347.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:28.355Z,1516402348.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:28.386Z,1516402348.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:28.747Z,1516402348.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:28.794Z,1516402348.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:29.177Z,1516402349.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:29.191Z,1516402349.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:29.577Z,1516402349.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:29.599Z,1516402349.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:29.960Z,1516402349.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:29.986Z,1516402349.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:30.348Z,1516402350.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:30.392Z,1516402350.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:30.745Z,1516402350.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:30.760Z,1516402350.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:31.163Z,1516402351.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:31.190Z,1516402351.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:31.562Z,1516402351.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:31.589Z,1516402351.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:31.961Z,1516402351.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:31.995Z,1516402351.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:32.352Z,1516402352.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:32.395Z,1516402352.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:32.751Z,1516402352.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:32.795Z,1516402352.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:33.160Z,1516402353.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:33.191Z,1516402353.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:33.566Z,1516402353.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:33.599Z,1516402353.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:33.962Z,1516402353.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:33.998Z,1516402353.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:34.349Z,1516402354.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:34.367Z,1516402354.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:34.753Z,1516402354.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:34.768Z,1516402354.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:35.162Z,1516402355.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:35.202Z,1516402355.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:35.562Z,1516402355.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:35.596Z,1516402355.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:35.972Z,1516402355.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:35.998Z,1516402355.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:36.358Z,1516402356.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:36.372Z,1516402356.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:36.749Z,1516402356.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:36.793Z,1516402356.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:37.162Z,1516402357.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:37.180Z,1516402357.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:37.572Z,1516402357.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:37.607Z,1516402357.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:37.958Z,1516402357.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:37.979Z,1516402357.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:38.348Z,1516402358.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:38.378Z,1516402358.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:38.751Z,1516402358.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:38.782Z,1516402358.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:39.154Z,1516402359.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:39.192Z,1516402359.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:39.577Z,1516402359.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:39.591Z,1516402359.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:39.954Z,1516402359.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:39.995Z,1516402359.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:40.352Z,1516402360.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:40.380Z,1516402360.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:40.747Z,1516402360.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:40.780Z,1516402360.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:41.174Z,1516402361.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:41.187Z,1516402361.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:41.574Z,1516402361.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:41.607Z,1516402361.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:41.970Z,1516402361.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:41.988Z,1516402361.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:42.348Z,1516402362.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:42.386Z,1516402362.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:42.745Z,1516402362.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:42.761Z,1516402362.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:43.166Z,1516402363.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:43.214Z,1516402363.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:43.566Z,1516402363.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:43.596Z,1516402363.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:43.955Z,1516402363.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:43.985Z,1516402363.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:44.356Z,1516402364.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:44.390Z,1516402364.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:44.755Z,1516402364.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:44.769Z,1516402364.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:45.158Z,1516402365.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:45.173Z,1516402365.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:45.566Z,1516402365.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:45.592Z,1516402365.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:45.973Z,1516402365.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:46.003Z,1516402366.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:46.357Z,1516402366.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:46.402Z,1516402366.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:46.753Z,1516402366.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:46.776Z,1516402366.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:47.162Z,1516402367.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:47.178Z,1516402367.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:47.567Z,1516402367.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:47.584Z,1516402367.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:47.961Z,1516402367.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:48.004Z,1516402368.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:48.352Z,1516402368.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:48.366Z,1516402368.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:48.748Z,1516402368.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:48.770Z,1516402368.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:49.155Z,1516402369.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:49.170Z,1516402369.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:49.563Z,1516402369.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:49.577Z,1516402369.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:49.961Z,1516402369.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:49.992Z,1516402369.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:50.369Z,1516402370.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:50.393Z,1516402370.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:50.760Z,1516402370.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:50.777Z,1516402370.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:51.141Z,1516402371.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:51.175Z,1516402371.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:51.554Z,1516402371.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:51.573Z,1516402371.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:51.944Z,1516402371.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:51.978Z,1516402371.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:52.369Z,1516402372.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:52.387Z,1516402372.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:52.768Z,1516402372.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:52.787Z,1516402372.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:53.170Z,1516402373.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:53.190Z,1516402373.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:53.555Z,1516402373.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:53.569Z,1516402373.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:53.955Z,1516402373.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:53.975Z,1516402373.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:54.343Z,1516402374.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:54.375Z,1516402374.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:54.754Z,1516402374.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:54.771Z,1516402374.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:55.150Z,1516402375.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:55.180Z,1516402375.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:55.563Z,1516402375.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:55.577Z,1516402375.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:58.660Z,1516402378.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:58.675Z,1516402378.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:58.796Z,1516402378.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:58.819Z,1516402378.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:59.128Z,1516402379.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:59.167Z,1516402379.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:59.529Z,1516402379.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:59.544Z,1516402379.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:52:59.921Z,1516402379.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:52:59.935Z,1516402379.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:00.343Z,1516402380.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:00.384Z,1516402380.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:00.756Z,1516402380.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:00.769Z,1516402380.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:01.139Z,1516402381.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:01.169Z,1516402381.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:01.531Z,1516402381.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:01.567Z,1516402381.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:01.924Z,1516402381.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:01.939Z,1516402381.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:02.321Z,1516402382.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:02.344Z,1516402382.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:02.730Z,1516402382.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:02.744Z,1516402382.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:03.129Z,1516402383.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:03.144Z,1516402383.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:03.531Z,1516402383.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:03.546Z,1516402383.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:03.946Z,1516402383.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:03.975Z,1516402383.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:04.331Z,1516402384.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:04.345Z,1516402384.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:04.726Z,1516402384.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:04.745Z,1516402384.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:05.128Z,1516402385.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:05.151Z,1516402385.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:05.534Z,1516402385.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:05.548Z,1516402385.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:05.922Z,1516402385.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:05.942Z,1516402385.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:06.347Z,1516402386.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:06.375Z,1516402386.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:06.734Z,1516402386.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:06.751Z,1516402386.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:07.130Z,1516402387.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:07.145Z,1516402387.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:07.528Z,1516402387.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:07.547Z,1516402387.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:07.932Z,1516402387.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:07.970Z,1516402387.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:08.322Z,1516402388.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:08.342Z,1516402388.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:08.728Z,1516402388.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:08.756Z,1516402388.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:09.132Z,1516402389.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:09.146Z,1516402389.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:09.546Z,1516402389.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:09.578Z,1516402389.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:09.942Z,1516402389.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:09.956Z,1516402389.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:10.338Z,1516402390.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:10.358Z,1516402390.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:10.721Z,1516402390.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:10.742Z,1516402390.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:11.136Z,1516402391.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:11.151Z,1516402391.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:11.536Z,1516402391.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:11.550Z,1516402391.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:11.935Z,1516402391.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:11.955Z,1516402391.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:12.338Z,1516402392.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:12.353Z,1516402392.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:12.737Z,1516402392.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:12.751Z,1516402392.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:13.135Z,1516402393.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:13.157Z,1516402393.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:13.531Z,1516402393.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:13.545Z,1516402393.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:13.928Z,1516402393.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:13.958Z,1516402393.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:14.321Z,1516402394.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:14.348Z,1516402394.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:14.736Z,1516402394.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:14.750Z,1516402394.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:15.136Z,1516402395.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:15.150Z,1516402395.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:15.545Z,1516402395.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:15.567Z,1516402395.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:15.945Z,1516402395.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:15.959Z,1516402395.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:16.346Z,1516402396.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:16.360Z,1516402396.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:16.729Z,1516402396.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:16.746Z,1516402396.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:17.126Z,1516402397.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:17.148Z,1516402397.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:17.520Z,1516402397.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:17.554Z,1516402397.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:17.929Z,1516402397.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:17.947Z,1516402397.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:18.342Z,1516402398.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:18.363Z,1516402398.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:18.745Z,1516402398.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:18.759Z,1516402398.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:19.142Z,1516402399.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:19.156Z,1516402399.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:19.526Z,1516402399.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:19.549Z,1516402399.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:19.919Z,1516402399.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:19.981Z,1516402399.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:20.317Z,1516402400.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:20.351Z,1516402400.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:20.736Z,1516402400.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:20.750Z,1516402400.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:21.119Z,1516402401.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:21.146Z,1516402401.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:21.545Z,1516402401.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:21.559Z,1516402401.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:21.945Z,1516402401.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:21.960Z,1516402401.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:22.336Z,1516402402.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:22.360Z,1516402402.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:22.717Z,1516402402.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:22.751Z,1516402402.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:23.126Z,1516402403.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:23.148Z,1516402403.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:23.520Z,1516402403.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:23.546Z,1516402403.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:23.929Z,1516402403.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:23.947Z,1516402403.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:24.345Z,1516402404.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:24.367Z,1516402404.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:24.743Z,1516402404.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:24.756Z,1516402404.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:25.141Z,1516402405.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:25.155Z,1516402405.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:25.526Z,1516402405.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:25.548Z,1516402405.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:25.919Z,1516402405.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:25.968Z,1516402405.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:26.317Z,1516402406.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:26.352Z,1516402406.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:26.730Z,1516402406.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:26.749Z,1516402406.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:27.119Z,1516402407.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:27.154Z,1516402407.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:27.545Z,1516402407.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:27.559Z,1516402407.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:27.945Z,1516402407.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:27.959Z,1516402407.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:28.329Z,1516402408.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:28.363Z,1516402408.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:28.721Z,1516402408.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:28.735Z,1516402408.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:29.127Z,1516402409.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:29.167Z,1516402409.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:29.524Z,1516402409.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:29.538Z,1516402409.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:29.924Z,1516402409.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:29.938Z,1516402409.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:30.342Z,1516402410.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:30.365Z,1516402410.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:30.746Z,1516402410.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:30.770Z,1516402410.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:31.130Z,1516402411.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:31.145Z,1516402411.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:31.531Z,1516402411.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:31.546Z,1516402411.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:31.931Z,1516402411.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:31.952Z,1516402411.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:32.327Z,1516402412.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:32.353Z,1516402412.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:32.733Z,1516402412.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:32.747Z,1516402412.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:33.132Z,1516402413.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:33.147Z,1516402413.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:33.546Z,1516402413.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:33.577Z,1516402413.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:33.942Z,1516402413.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:33.957Z,1516402413.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:34.338Z,1516402414.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:34.358Z,1516402414.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:34.726Z,1516402414.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:34.760Z,1516402414.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:35.137Z,1516402415.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:35.163Z,1516402415.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:35.542Z,1516402415.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:35.555Z,1516402415.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:35.936Z,1516402415.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:35.963Z,1516402415.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:36.349Z,1516402416.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:36.378Z,1516402416.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:36.750Z,1516402416.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:36.803Z,1516402416.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:37.150Z,1516402417.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:37.171Z,1516402417.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:37.524Z,1516402417.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:37.556Z,1516402417.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:37.953Z,1516402417.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:37.976Z,1516402417.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:38.325Z,1516402418.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:38.362Z,1516402418.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:38.734Z,1516402418.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:38.751Z,1516402418.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:39.134Z,1516402419.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:39.191Z,1516402419.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:39.536Z,1516402419.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:39.579Z,1516402419.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:39.961Z,1516402419.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:40.000Z,1516402420.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:40.348Z,1516402420.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:40.440Z,1516402420.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:40.735Z,1516402420.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:40.758Z,1516402420.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:41.125Z,1516402421.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:41.174Z,1516402421.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:41.546Z,1516402421.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:41.605Z,1516402421.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:41.925Z,1516402421.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:41.972Z,1516402421.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:42.375Z,1516402422.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:42.417Z,1516402422.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:42.751Z,1516402422.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:42.770Z,1516402422.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:43.145Z,1516402423.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:43.159Z,1516402423.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:43.532Z,1516402423.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:43.558Z,1516402423.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:43.928Z,1516402423.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:43.942Z,1516402423.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:44.325Z,1516402424.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:44.339Z,1516402424.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:44.733Z,1516402424.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:44.747Z,1516402424.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:45.132Z,1516402425.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:45.146Z,1516402425.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:45.543Z,1516402425.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:45.571Z,1516402425.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:45.943Z,1516402425.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:45.973Z,1516402425.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:46.347Z,1516402426.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:46.376Z,1516402426.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:46.721Z,1516402426.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:46.748Z,1516402426.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:47.129Z,1516402427.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:47.147Z,1516402427.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:47.533Z,1516402427.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:47.547Z,1516402427.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:47.922Z,1516402427.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:47.942Z,1516402427.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:48.334Z,1516402428.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:48.349Z,1516402428.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:48.746Z,1516402428.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:48.779Z,1516402428.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:49.134Z,1516402429.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:49.148Z,1516402429.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:49.529Z,1516402429.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:49.547Z,1516402429.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:49.932Z,1516402429.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:49.946Z,1516402429.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:50.322Z,1516402430.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:50.342Z,1516402430.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:50.730Z,1516402430.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:50.745Z,1516402430.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:51.128Z,1516402431.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:51.142Z,1516402431.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:51.546Z,1516402431.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:51.575Z,1516402431.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:51.938Z,1516402431.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:51.975Z,1516402431.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:52.345Z,1516402432.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:52.379Z,1516402432.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:52.722Z,1516402432.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:52.742Z,1516402432.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:53.129Z,1516402433.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:53.147Z,1516402433.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:53.527Z,1516402433.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:53.541Z,1516402433.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:53.929Z,1516402433.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:53.944Z,1516402433.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:54.334Z,1516402434.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:54.349Z,1516402434.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:54.733Z,1516402434.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:54.747Z,1516402434.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:55.132Z,1516402435.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:55.159Z,1516402435.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:55.535Z,1516402435.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:55.555Z,1516402435.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:55.937Z,1516402435.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:55.951Z,1516402435.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:59.016Z,1516402439.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:59.039Z,1516402439.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:59.147Z,1516402439.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:59.187Z,1516402439.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:59.506Z,1516402439.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:59.536Z,1516402439.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:53:59.914Z,1516402439.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:53:59.937Z,1516402439.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:00.294Z,1516402440.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:00.308Z,1516402440.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:00.696Z,1516402440.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:00.715Z,1516402440.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:01.092Z,1516402441.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:01.106Z,1516402441.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:01.493Z,1516402441.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:01.507Z,1516402441.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:01.892Z,1516402441.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:01.910Z,1516402441.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:02.303Z,1516402442.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:02.336Z,1516402442.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:02.698Z,1516402442.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:02.712Z,1516402442.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:03.098Z,1516402443.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:03.112Z,1516402443.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:03.492Z,1516402443.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:03.506Z,1516402443.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:03.906Z,1516402443.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:03.947Z,1516402443.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:04.298Z,1516402444.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:04.312Z,1516402444.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:04.706Z,1516402444.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:04.720Z,1516402444.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:05.094Z,1516402445.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:05.108Z,1516402445.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:05.489Z,1516402445.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:05.503Z,1516402445.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:05.891Z,1516402445.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:05.905Z,1516402445.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:06.302Z,1516402446.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:06.316Z,1516402446.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:06.702Z,1516402446.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:06.727Z,1516402446.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:07.101Z,1516402447.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:07.115Z,1516402447.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:07.489Z,1516402447.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:07.558Z,1516402447.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:07.888Z,1516402447.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:07.915Z,1516402447.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:08.309Z,1516402448.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:08.323Z,1516402448.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:08.702Z,1516402448.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:08.717Z,1516402448.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:09.106Z,1516402449.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:09.120Z,1516402449.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:09.502Z,1516402449.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:09.516Z,1516402449.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:09.885Z,1516402449.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:09.912Z,1516402449.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:10.310Z,1516402450.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:10.324Z,1516402450.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:10.710Z,1516402450.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:10.724Z,1516402450.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:11.098Z,1516402451.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:11.125Z,1516402451.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:11.500Z,1516402451.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:11.515Z,1516402451.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:11.884Z,1516402451.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:11.923Z,1516402451.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:12.298Z,1516402452.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:12.330Z,1516402452.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:12.712Z,1516402452.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:12.727Z,1516402452.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:13.104Z,1516402453.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:13.118Z,1516402453.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:13.497Z,1516402453.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:13.515Z,1516402453.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:13.887Z,1516402453.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:13.923Z,1516402453.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:14.304Z,1516402454.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:14.318Z,1516402454.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:14.706Z,1516402454.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:14.725Z,1516402454.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:15.107Z,1516402455.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:15.121Z,1516402455.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:15.483Z,1516402455.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:15.511Z,1516402455.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:15.886Z,1516402455.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:15.913Z,1516402455.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:16.287Z,1516402456.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:16.319Z,1516402456.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:16.701Z,1516402456.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:16.731Z,1516402456.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:17.100Z,1516402457.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:17.126Z,1516402457.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:17.510Z,1516402457.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:17.524Z,1516402457.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:17.887Z,1516402457.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:17.920Z,1516402457.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:18.286Z,1516402458.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:18.308Z,1516402458.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:18.689Z,1516402458.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:18.715Z,1516402458.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:19.092Z,1516402459.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:19.130Z,1516402459.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:19.498Z,1516402459.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:19.540Z,1516402459.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:19.902Z,1516402459.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:19.928Z,1516402459.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:20.294Z,1516402460.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:20.328Z,1516402460.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:20.685Z,1516402460.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:20.700Z,1516402460.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:21.096Z,1516402461.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:21.130Z,1516402461.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:21.491Z,1516402461.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:21.506Z,1516402461.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:21.883Z,1516402461.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:21.897Z,1516402461.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:22.295Z,1516402462.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:22.328Z,1516402462.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:22.706Z,1516402462.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:22.732Z,1516402462.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:23.094Z,1516402463.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:23.108Z,1516402463.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:23.506Z,1516402463.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:23.530Z,1516402463.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:23.892Z,1516402463.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:23.906Z,1516402463.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:24.288Z,1516402464.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:24.302Z,1516402464.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:24.696Z,1516402464.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:24.710Z,1516402464.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:25.095Z,1516402465.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:25.109Z,1516402465.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:25.502Z,1516402465.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:25.516Z,1516402465.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:25.906Z,1516402465.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:25.920Z,1516402465.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:26.310Z,1516402466.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:26.324Z,1516402466.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:26.689Z,1516402466.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:26.703Z,1516402466.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:27.093Z,1516402467.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:27.111Z,1516402467.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:27.500Z,1516402467.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:27.514Z,1516402467.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:27.894Z,1516402467.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:27.911Z,1516402467.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:28.290Z,1516402468.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:28.312Z,1516402468.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:28.705Z,1516402468.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:28.719Z,1516402468.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:29.105Z,1516402469.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:29.119Z,1516402469.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:29.509Z,1516402469.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:29.523Z,1516402469.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:29.900Z,1516402469.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:29.913Z,1516402469.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:30.289Z,1516402470.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:30.319Z,1516402470.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:30.700Z,1516402470.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:30.714Z,1516402470.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:31.087Z,1516402471.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:31.122Z,1516402471.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:31.510Z,1516402471.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:31.524Z,1516402471.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:31.911Z,1516402471.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:31.930Z,1516402471.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:32.304Z,1516402472.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:32.337Z,1516402472.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:32.681Z,1516402472.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:32.703Z,1516402472.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:33.087Z,1516402473.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:33.122Z,1516402473.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:33.487Z,1516402473.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:33.524Z,1516402473.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:33.882Z,1516402473.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:33.896Z,1516402473.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:34.291Z,1516402474.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:34.322Z,1516402474.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:34.711Z,1516402474.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:34.725Z,1516402474.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:35.098Z,1516402475.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:35.135Z,1516402475.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:35.502Z,1516402475.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:35.527Z,1516402475.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:35.887Z,1516402475.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:35.902Z,1516402475.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:36.285Z,1516402476.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:36.299Z,1516402476.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:36.696Z,1516402476.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:36.726Z,1516402476.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:37.088Z,1516402477.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:37.107Z,1516402477.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:37.502Z,1516402477.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:37.516Z,1516402477.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:37.906Z,1516402477.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:37.920Z,1516402477.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:38.310Z,1516402478.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:38.324Z,1516402478.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:38.693Z,1516402478.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:38.707Z,1516402478.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:39.095Z,1516402479.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:39.109Z,1516402479.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:39.496Z,1516402479.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:39.510Z,1516402479.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:39.893Z,1516402479.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:39.908Z,1516402479.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:40.294Z,1516402480.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:40.309Z,1516402480.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:40.701Z,1516402480.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:40.716Z,1516402480.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:41.100Z,1516402481.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:41.119Z,1516402481.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:41.502Z,1516402481.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:41.516Z,1516402481.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:41.896Z,1516402481.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:41.910Z,1516402481.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:42.299Z,1516402482.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:42.313Z,1516402482.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:42.699Z,1516402482.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:42.719Z,1516402482.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:43.105Z,1516402483.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:43.127Z,1516402483.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:43.510Z,1516402483.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:43.524Z,1516402483.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:43.909Z,1516402483.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:43.923Z,1516402483.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:44.307Z,1516402484.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:44.327Z,1516402484.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:44.699Z,1516402484.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:44.719Z,1516402484.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:44.719Z,1516402484.719 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-01-19T22:54:44.719Z,1516402484.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:54:44.721Z,1516402484.721 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:44.721Z,1516402484.721 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-01-19T22:54:44.721Z,1516402484.721 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:54:44.723Z,1516402484.723 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:44.723Z,1516402484.723 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2018-01-19T22:54:44.723Z,1516402484.723 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:54:44.759Z,1516402484.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:54:44.759Z,1516402484.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:54:44.759Z,1516402484.759 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:54:45.087Z,1516402485.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:45.129Z,1516402485.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:54:45.129Z,1516402485.129 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-01-19T22:54:45.130Z,1516402485.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:54:45.130Z,1516402485.130 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-01-19T22:54:45.130Z,1516402485.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:54:45.130Z,1516402485.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2018-01-19T22:54:45.509Z,1516402485.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:45.522Z,1516402485.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:54:45.522Z,1516402485.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:54:45.523Z,1516402485.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:54:45.523Z,1516402485.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:54:45.523Z,1516402485.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:54:45.524Z,1516402485.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:54:45.524Z,1516402485.524 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:54:45.524Z,1516402485.524 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:54:45.525Z,1516402485.525 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:54:45.888Z,1516402485.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:45.918Z,1516402485.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:54:45.919Z,1516402485.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:46.287Z,1516402486.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:46.312Z,1516402486.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:54:46.313Z,1516402486.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:46.708Z,1516402486.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:46.722Z,1516402486.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:54:46.723Z,1516402486.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:47.106Z,1516402487.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:47.128Z,1516402487.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:54:47.133Z,1516402487.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:47.510Z,1516402487.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:47.524Z,1516402487.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:54:47.525Z,1516402487.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:47.888Z,1516402487.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:47.918Z,1516402487.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:54:47.919Z,1516402487.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:48.291Z,1516402488.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:48.323Z,1516402488.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T22:54:48.324Z,1516402488.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:48.696Z,1516402488.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:48.723Z,1516402488.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T22:54:48.724Z,1516402488.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:49.084Z,1516402489.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:49.098Z,1516402489.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T22:54:49.099Z,1516402489.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:49.498Z,1516402489.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:49.524Z,1516402489.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T22:54:49.526Z,1516402489.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:49.902Z,1516402489.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:49.936Z,1516402489.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T22:54:49.937Z,1516402489.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:50.303Z,1516402490.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:50.331Z,1516402490.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T22:54:50.331Z,1516402490.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:50.687Z,1516402490.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:50.727Z,1516402490.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T22:54:50.728Z,1516402490.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:51.091Z,1516402491.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:51.126Z,1516402491.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T22:54:51.127Z,1516402491.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:51.495Z,1516402491.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:51.510Z,1516402491.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:54:51.511Z,1516402491.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:51.896Z,1516402491.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:51.911Z,1516402491.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:54:51.911Z,1516402491.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:52.296Z,1516402492.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:52.311Z,1516402492.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:54:52.312Z,1516402492.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:52.711Z,1516402492.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:52.741Z,1516402492.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:54:52.742Z,1516402492.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:53.110Z,1516402493.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:53.142Z,1516402493.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:54:53.143Z,1516402493.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:53.498Z,1516402493.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:53.512Z,1516402493.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:54:53.513Z,1516402493.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:53.896Z,1516402493.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:53.909Z,1516402493.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:54:53.910Z,1516402493.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:54.290Z,1516402494.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:54.318Z,1516402494.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T22:54:54.319Z,1516402494.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:54.699Z,1516402494.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:54.718Z,1516402494.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:54:54.719Z,1516402494.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:55.100Z,1516402495.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:55.113Z,1516402495.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:54:55.114Z,1516402495.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:55.501Z,1516402495.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:55.515Z,1516402495.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:54:55.516Z,1516402495.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:55.902Z,1516402495.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:55.916Z,1516402495.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:54:55.917Z,1516402495.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:56.302Z,1516402496.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:56.316Z,1516402496.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:54:56.317Z,1516402496.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:59.384Z,1516402499.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:59.399Z,1516402499.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-01-19T22:54:59.401Z,1516402499.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:59.503Z,1516402499.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:59.522Z,1516402499.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:54:59.523Z,1516402499.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:54:59.874Z,1516402499.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:54:59.896Z,1516402499.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:54:59.897Z,1516402499.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:00.274Z,1516402500.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:00.304Z,1516402500.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T22:55:00.305Z,1516402500.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:00.662Z,1516402500.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:00.676Z,1516402500.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T22:55:00.677Z,1516402500.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:01.055Z,1516402501.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:01.074Z,1516402501.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T22:55:01.075Z,1516402501.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:01.456Z,1516402501.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:01.470Z,1516402501.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T22:55:01.471Z,1516402501.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:01.857Z,1516402501.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:01.871Z,1516402501.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T22:55:01.872Z,1516402501.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:02.257Z,1516402502.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:02.271Z,1516402502.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T22:55:02.272Z,1516402502.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:02.666Z,1516402502.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:02.680Z,1516402502.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T22:55:02.681Z,1516402502.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:03.062Z,1516402503.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:03.076Z,1516402503.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T22:55:03.077Z,1516402503.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:03.462Z,1516402503.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:03.476Z,1516402503.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T22:55:03.477Z,1516402503.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:03.860Z,1516402503.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:03.873Z,1516402503.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T22:55:03.874Z,1516402503.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:04.257Z,1516402504.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:04.280Z,1516402504.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T22:55:04.281Z,1516402504.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:04.661Z,1516402504.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:04.675Z,1516402504.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T22:55:04.676Z,1516402504.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:05.060Z,1516402505.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:05.073Z,1516402505.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:05.461Z,1516402505.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:05.483Z,1516402505.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:05.866Z,1516402505.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:05.880Z,1516402505.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:06.274Z,1516402506.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:06.305Z,1516402506.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:06.657Z,1516402506.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:06.672Z,1516402506.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:07.057Z,1516402507.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:07.076Z,1516402507.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:07.464Z,1516402507.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:07.478Z,1516402507.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:07.853Z,1516402507.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:07.882Z,1516402507.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:08.254Z,1516402508.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:08.276Z,1516402508.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:08.667Z,1516402508.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:08.693Z,1516402508.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:09.067Z,1516402509.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:09.089Z,1516402509.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:09.473Z,1516402509.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:09.487Z,1516402509.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:09.860Z,1516402509.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:09.875Z,1516402509.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:10.263Z,1516402510.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:10.277Z,1516402510.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:10.668Z,1516402510.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:10.682Z,1516402510.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:11.065Z,1516402511.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:11.087Z,1516402511.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:11.470Z,1516402511.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:11.484Z,1516402511.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:11.872Z,1516402511.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:11.891Z,1516402511.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:12.278Z,1516402512.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:12.299Z,1516402512.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:12.645Z,1516402512.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:12.678Z,1516402512.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:13.051Z,1516402513.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:13.087Z,1516402513.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:13.465Z,1516402513.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:13.479Z,1516402513.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:13.852Z,1516402513.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:13.878Z,1516402513.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:14.251Z,1516402514.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:14.285Z,1516402514.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:14.674Z,1516402514.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:14.695Z,1516402514.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:15.077Z,1516402515.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:15.099Z,1516402515.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:15.473Z,1516402515.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:15.488Z,1516402515.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:15.862Z,1516402515.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:15.882Z,1516402515.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:16.247Z,1516402516.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:16.272Z,1516402516.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:16.652Z,1516402516.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:16.682Z,1516402516.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:17.061Z,1516402517.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:17.083Z,1516402517.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:17.474Z,1516402517.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:17.489Z,1516402517.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:17.876Z,1516402517.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:17.895Z,1516402517.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:18.274Z,1516402518.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:18.288Z,1516402518.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:18.664Z,1516402518.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:18.679Z,1516402518.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:19.072Z,1516402519.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:19.091Z,1516402519.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:19.466Z,1516402519.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:19.480Z,1516402519.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:19.848Z,1516402519.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:19.879Z,1516402519.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:20.256Z,1516402520.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:20.282Z,1516402520.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:20.676Z,1516402520.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:20.690Z,1516402520.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:21.075Z,1516402521.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:21.089Z,1516402521.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:21.475Z,1516402521.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:21.489Z,1516402521.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:21.856Z,1516402521.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:21.887Z,1516402521.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:22.254Z,1516402522.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:22.279Z,1516402522.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:22.652Z,1516402522.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:22.683Z,1516402522.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:23.057Z,1516402523.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:23.088Z,1516402523.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:23.463Z,1516402523.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:23.489Z,1516402523.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:23.870Z,1516402523.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:23.896Z,1516402523.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:24.271Z,1516402524.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:24.296Z,1516402524.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:24.660Z,1516402524.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:24.691Z,1516402524.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:25.062Z,1516402525.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:25.097Z,1516402525.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:25.460Z,1516402525.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:25.474Z,1516402525.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:25.862Z,1516402525.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:25.876Z,1516402525.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:26.255Z,1516402526.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:26.275Z,1516402526.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:26.671Z,1516402526.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:26.702Z,1516402526.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:27.075Z,1516402527.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:27.103Z,1516402527.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:27.475Z,1516402527.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:27.504Z,1516402527.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:27.860Z,1516402527.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:27.875Z,1516402527.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:28.258Z,1516402528.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:28.272Z,1516402528.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:28.663Z,1516402528.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:28.678Z,1516402528.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:29.060Z,1516402529.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:29.073Z,1516402529.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:29.462Z,1516402529.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:29.477Z,1516402529.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:29.867Z,1516402529.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:29.904Z,1516402529.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:30.265Z,1516402530.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:30.279Z,1516402530.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:30.658Z,1516402530.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:30.673Z,1516402530.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:31.061Z,1516402531.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:31.075Z,1516402531.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:31.474Z,1516402531.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:31.505Z,1516402531.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:31.863Z,1516402531.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:31.887Z,1516402531.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:32.266Z,1516402532.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:32.280Z,1516402532.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:32.661Z,1516402532.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:32.675Z,1516402532.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:33.058Z,1516402533.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:33.079Z,1516402533.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:33.469Z,1516402533.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:33.484Z,1516402533.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:33.870Z,1516402533.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:33.884Z,1516402533.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:34.266Z,1516402534.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:34.281Z,1516402534.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:34.667Z,1516402534.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:34.681Z,1516402534.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:35.068Z,1516402535.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:35.082Z,1516402535.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:35.464Z,1516402535.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:35.486Z,1516402535.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:35.871Z,1516402535.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:35.891Z,1516402535.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:36.272Z,1516402536.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:36.286Z,1516402536.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:36.668Z,1516402536.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:36.683Z,1516402536.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:37.066Z,1516402537.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:37.081Z,1516402537.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:37.469Z,1516402537.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:37.490Z,1516402537.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:37.872Z,1516402537.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:37.887Z,1516402537.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:38.272Z,1516402538.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:38.287Z,1516402538.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:38.668Z,1516402538.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:38.681Z,1516402538.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:39.064Z,1516402539.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:39.079Z,1516402539.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:39.471Z,1516402539.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:39.485Z,1516402539.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:39.872Z,1516402539.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:39.886Z,1516402539.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:40.270Z,1516402540.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:40.291Z,1516402540.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:40.664Z,1516402540.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:40.679Z,1516402540.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:41.065Z,1516402541.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:41.081Z,1516402541.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:41.470Z,1516402541.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:41.484Z,1516402541.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:41.872Z,1516402541.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:41.886Z,1516402541.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:42.268Z,1516402542.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:42.281Z,1516402542.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:42.664Z,1516402542.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:42.710Z,1516402542.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:43.060Z,1516402543.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:43.069Z,1516402543.069 [PNI_TCM](ERROR): CRC does not match. Expected:0x25561 got:0x1857
2018-01-19T22:55:43.095Z,1516402543.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:43.477Z,1516402543.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:43.491Z,1516402543.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:43.873Z,1516402543.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:43.887Z,1516402543.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:44.271Z,1516402544.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:44.287Z,1516402544.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:44.667Z,1516402544.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:44.681Z,1516402544.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:45.067Z,1516402545.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:45.081Z,1516402545.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:45.469Z,1516402545.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:45.490Z,1516402545.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:45.875Z,1516402545.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:45.890Z,1516402545.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:46.275Z,1516402546.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:46.289Z,1516402546.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:46.659Z,1516402546.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:46.687Z,1516402546.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:47.066Z,1516402547.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:47.080Z,1516402547.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:47.475Z,1516402547.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:47.492Z,1516402547.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:47.876Z,1516402547.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:47.890Z,1516402547.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:48.265Z,1516402548.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:48.279Z,1516402548.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:48.655Z,1516402548.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:48.686Z,1516402548.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:49.051Z,1516402549.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:49.086Z,1516402549.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:49.479Z,1516402549.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:49.492Z,1516402549.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:49.881Z,1516402549.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:49.903Z,1516402549.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:50.275Z,1516402550.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:50.295Z,1516402550.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:50.648Z,1516402550.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:50.689Z,1516402550.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:51.055Z,1516402551.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:51.085Z,1516402551.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:51.467Z,1516402551.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:51.494Z,1516402551.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:51.864Z,1516402551.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:51.890Z,1516402551.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:52.274Z,1516402552.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:52.307Z,1516402552.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:52.656Z,1516402552.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:52.686Z,1516402552.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:53.051Z,1516402553.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:53.090Z,1516402553.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:53.476Z,1516402553.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:53.495Z,1516402553.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:53.874Z,1516402553.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:53.910Z,1516402553.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:54.278Z,1516402554.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:54.293Z,1516402554.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:54.652Z,1516402554.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:54.694Z,1516402554.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:55.051Z,1516402555.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:55.085Z,1516402555.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:55.088Z,1516402555.088 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T22:55:55.088Z,1516402555.088 [Default:CheckIn:C.Wait] Stopped
2018-01-19T22:55:55.088Z,1516402555.088 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T22:55:55.088Z,1516402555.088 [Default:CheckIn:D] Running Loop=1
2018-01-19T22:55:55.476Z,1516402555.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:55.494Z,1516402555.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:55.497Z,1516402555.497 [Default:CheckIn:D] Stopped
2018-01-19T22:55:55.497Z,1516402555.497 [Default:CheckIn:E] Running Loop=1
2018-01-19T22:55:55.878Z,1516402555.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:55.895Z,1516402555.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:55.898Z,1516402555.898 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 103.124528 min 
2018-01-19T22:55:55.898Z,1516402555.898 [Default:CheckIn:E] Stopped
2018-01-19T22:55:55.898Z,1516402555.898 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T22:55:55.899Z,1516402555.899 [Default:CheckIn] Stopped
2018-01-19T22:55:55.899Z,1516402555.899 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T22:55:55.899Z,1516402555.899 [Default:CheckIn](INFO): Running loop #11
2018-01-19T22:55:55.899Z,1516402555.899 [Default:CheckIn] Running Loop=11
2018-01-19T22:55:55.899Z,1516402555.899 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T22:55:55.899Z,1516402555.899 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T22:55:56.272Z,1516402556.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:56.295Z,1516402556.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:56.660Z,1516402556.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:56.693Z,1516402556.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:59.768Z,1516402559.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:59.790Z,1516402559.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:55:59.906Z,1516402559.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:55:59.920Z,1516402559.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:00.262Z,1516402560.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:00.296Z,1516402560.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:00.666Z,1516402560.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:00.694Z,1516402560.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:01.050Z,1516402561.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:01.064Z,1516402561.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:01.450Z,1516402561.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:01.495Z,1516402561.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:01.844Z,1516402561.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:01.867Z,1516402561.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:02.251Z,1516402562.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:02.267Z,1516402562.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:02.655Z,1516402562.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:02.671Z,1516402562.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:03.054Z,1516402563.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:03.070Z,1516402563.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:03.454Z,1516402563.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:03.468Z,1516402563.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:03.848Z,1516402563.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:03.862Z,1516402563.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:04.241Z,1516402564.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:04.263Z,1516402564.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:04.651Z,1516402564.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:04.672Z,1516402564.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:05.052Z,1516402565.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:05.067Z,1516402565.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:05.435Z,1516402565.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:05.462Z,1516402565.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:05.850Z,1516402565.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:05.877Z,1516402565.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:06.261Z,1516402566.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:06.280Z,1516402566.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:06.663Z,1516402566.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:06.678Z,1516402566.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:07.035Z,1516402567.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:07.066Z,1516402567.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:07.455Z,1516402567.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:07.475Z,1516402567.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:07.853Z,1516402567.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:07.866Z,1516402567.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:08.235Z,1516402568.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:08.260Z,1516402568.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:08.658Z,1516402568.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:08.672Z,1516402568.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:09.062Z,1516402569.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:09.076Z,1516402569.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:09.462Z,1516402569.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:09.477Z,1516402569.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:09.851Z,1516402569.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:09.866Z,1516402569.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:10.239Z,1516402570.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:10.272Z,1516402570.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:10.639Z,1516402570.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:10.675Z,1516402570.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:11.044Z,1516402571.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:11.079Z,1516402571.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:11.443Z,1516402571.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:11.476Z,1516402571.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:11.862Z,1516402571.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:11.877Z,1516402571.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:12.262Z,1516402572.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:12.280Z,1516402572.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:12.650Z,1516402572.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:12.679Z,1516402572.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:13.044Z,1516402573.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:13.074Z,1516402573.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:13.440Z,1516402573.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:13.475Z,1516402573.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:13.836Z,1516402573.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:13.851Z,1516402573.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:14.243Z,1516402574.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:14.279Z,1516402574.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:14.651Z,1516402574.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:14.676Z,1516402574.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:15.054Z,1516402575.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:15.081Z,1516402575.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:15.454Z,1516402575.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:15.487Z,1516402575.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:15.839Z,1516402575.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:15.875Z,1516402575.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:16.243Z,1516402576.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:16.257Z,1516402576.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:16.643Z,1516402576.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:16.680Z,1516402576.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:17.048Z,1516402577.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:17.062Z,1516402577.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:17.447Z,1516402577.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:17.461Z,1516402577.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:17.862Z,1516402577.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:17.892Z,1516402577.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:18.262Z,1516402578.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:18.292Z,1516402578.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:18.646Z,1516402578.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:18.666Z,1516402578.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:19.044Z,1516402579.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:19.058Z,1516402579.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:19.444Z,1516402579.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:19.463Z,1516402579.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:19.851Z,1516402579.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:19.865Z,1516402579.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:20.248Z,1516402580.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:20.267Z,1516402580.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:20.650Z,1516402580.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:20.665Z,1516402580.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:21.049Z,1516402581.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:21.063Z,1516402581.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:21.450Z,1516402581.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:21.464Z,1516402581.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:21.849Z,1516402581.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:21.863Z,1516402581.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:22.245Z,1516402582.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:22.259Z,1516402582.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:22.647Z,1516402582.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:22.667Z,1516402582.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:23.049Z,1516402583.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:23.063Z,1516402583.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:23.448Z,1516402583.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:23.462Z,1516402583.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:23.850Z,1516402583.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:23.865Z,1516402583.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:24.262Z,1516402584.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:24.276Z,1516402584.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:24.654Z,1516402584.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:24.675Z,1516402584.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:25.051Z,1516402585.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:25.065Z,1516402585.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:25.447Z,1516402585.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:25.461Z,1516402585.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:25.844Z,1516402585.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:25.858Z,1516402585.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:26.251Z,1516402586.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:26.265Z,1516402586.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:26.651Z,1516402586.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:26.671Z,1516402586.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:27.058Z,1516402587.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:27.072Z,1516402587.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:27.454Z,1516402587.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:27.468Z,1516402587.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:27.847Z,1516402587.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:27.861Z,1516402587.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:28.244Z,1516402588.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:28.257Z,1516402588.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:28.651Z,1516402588.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:28.671Z,1516402588.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:29.051Z,1516402589.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:29.071Z,1516402589.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:29.452Z,1516402589.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:29.466Z,1516402589.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:29.854Z,1516402589.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:29.869Z,1516402589.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:30.258Z,1516402590.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:30.272Z,1516402590.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:30.654Z,1516402590.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:30.675Z,1516402590.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:31.049Z,1516402591.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:31.063Z,1516402591.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:31.447Z,1516402591.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:31.461Z,1516402591.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:31.852Z,1516402591.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:31.866Z,1516402591.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:32.248Z,1516402592.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:32.262Z,1516402592.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:32.652Z,1516402592.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:32.671Z,1516402592.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:33.058Z,1516402593.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:33.072Z,1516402593.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:33.454Z,1516402593.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:33.468Z,1516402593.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:33.847Z,1516402593.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:33.862Z,1516402593.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:34.244Z,1516402594.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:34.258Z,1516402594.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:34.651Z,1516402594.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:34.670Z,1516402594.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:35.051Z,1516402595.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:35.071Z,1516402595.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:35.452Z,1516402595.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:35.466Z,1516402595.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:35.854Z,1516402595.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:35.868Z,1516402595.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:36.258Z,1516402596.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:36.272Z,1516402596.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:36.655Z,1516402596.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:36.669Z,1516402596.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:37.051Z,1516402597.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:37.071Z,1516402597.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:37.452Z,1516402597.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:37.466Z,1516402597.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:37.846Z,1516402597.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:37.860Z,1516402597.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:38.254Z,1516402598.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:38.268Z,1516402598.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:38.654Z,1516402598.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:38.668Z,1516402598.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:39.055Z,1516402599.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:39.069Z,1516402599.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:39.454Z,1516402599.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:39.469Z,1516402599.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:39.851Z,1516402599.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:39.866Z,1516402599.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:40.246Z,1516402600.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:40.259Z,1516402600.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:40.651Z,1516402600.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:40.671Z,1516402600.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:41.048Z,1516402601.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:41.067Z,1516402601.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:41.454Z,1516402601.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:41.468Z,1516402601.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:41.852Z,1516402601.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:41.876Z,1516402601.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:42.258Z,1516402602.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:42.279Z,1516402602.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:42.658Z,1516402602.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:42.679Z,1516402602.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:43.041Z,1516402603.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:43.059Z,1516402603.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:43.442Z,1516402603.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:43.468Z,1516402603.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:43.853Z,1516402603.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:43.867Z,1516402603.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:44.245Z,1516402604.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:44.267Z,1516402604.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:44.661Z,1516402604.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:44.679Z,1516402604.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:45.065Z,1516402605.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:45.080Z,1516402605.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:45.462Z,1516402605.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:45.477Z,1516402605.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:45.839Z,1516402605.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:45.870Z,1516402605.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:46.235Z,1516402606.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:46.261Z,1516402606.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:46.650Z,1516402606.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:46.668Z,1516402606.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:47.040Z,1516402607.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:47.065Z,1516402607.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:47.452Z,1516402607.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:47.465Z,1516402607.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:47.850Z,1516402607.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:47.880Z,1516402607.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:48.262Z,1516402608.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:48.276Z,1516402608.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:48.653Z,1516402608.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:48.667Z,1516402608.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:49.037Z,1516402609.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:49.071Z,1516402609.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:49.439Z,1516402609.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:49.475Z,1516402609.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:49.853Z,1516402609.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:49.867Z,1516402609.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:50.237Z,1516402610.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:50.271Z,1516402610.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:50.662Z,1516402610.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:50.677Z,1516402610.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:51.059Z,1516402611.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:51.073Z,1516402611.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:51.454Z,1516402611.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:51.469Z,1516402611.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:51.840Z,1516402611.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:51.866Z,1516402611.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:52.237Z,1516402612.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:52.274Z,1516402612.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:52.644Z,1516402612.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:52.669Z,1516402612.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:53.040Z,1516402613.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:53.071Z,1516402613.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:53.443Z,1516402613.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:53.471Z,1516402613.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:53.846Z,1516402613.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:53.883Z,1516402613.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:54.267Z,1516402614.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:54.287Z,1516402614.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:54.663Z,1516402614.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:54.677Z,1516402614.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:55.037Z,1516402615.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:55.059Z,1516402615.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:55.443Z,1516402615.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:55.475Z,1516402615.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:55.836Z,1516402615.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:55.875Z,1516402615.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:56.243Z,1516402616.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:56.279Z,1516402616.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:56.654Z,1516402616.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:56.680Z,1516402616.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:56:57.054Z,1516402617.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:56:57.080Z,1516402617.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:00.150Z,1516402620.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:00.172Z,1516402620.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:00.280Z,1516402620.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:00.319Z,1516402620.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:00.625Z,1516402620.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:00.643Z,1516402620.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:01.028Z,1516402621.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:01.042Z,1516402621.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:01.428Z,1516402621.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:01.447Z,1516402621.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:01.843Z,1516402621.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:01.873Z,1516402621.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:02.233Z,1516402622.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:02.247Z,1516402622.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:02.632Z,1516402622.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:02.651Z,1516402622.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:03.031Z,1516402623.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:03.045Z,1516402623.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:03.431Z,1516402623.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:03.445Z,1516402623.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:03.831Z,1516402623.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:03.851Z,1516402623.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:04.230Z,1516402624.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:04.244Z,1516402624.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:04.634Z,1516402624.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:04.648Z,1516402624.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:05.038Z,1516402625.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:05.052Z,1516402625.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:05.434Z,1516402625.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:05.448Z,1516402625.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:05.832Z,1516402625.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:05.845Z,1516402625.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:06.229Z,1516402626.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:06.243Z,1516402626.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:06.631Z,1516402626.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:06.645Z,1516402626.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:07.032Z,1516402627.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:07.045Z,1516402627.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:07.431Z,1516402627.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:07.445Z,1516402627.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:07.834Z,1516402627.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:07.849Z,1516402627.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:08.238Z,1516402628.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:08.252Z,1516402628.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:08.634Z,1516402628.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:08.649Z,1516402628.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:09.036Z,1516402629.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:09.055Z,1516402629.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:09.431Z,1516402629.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:09.445Z,1516402629.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:09.831Z,1516402629.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:09.851Z,1516402629.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:10.231Z,1516402630.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:10.245Z,1516402630.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:10.634Z,1516402630.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:10.648Z,1516402630.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:11.038Z,1516402631.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:11.052Z,1516402631.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:11.434Z,1516402631.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:11.448Z,1516402631.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:11.834Z,1516402631.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:11.847Z,1516402631.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:12.232Z,1516402632.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:12.247Z,1516402632.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:12.632Z,1516402632.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:12.646Z,1516402632.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:13.026Z,1516402633.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:13.040Z,1516402633.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:13.426Z,1516402633.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:13.445Z,1516402633.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:13.834Z,1516402633.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:13.849Z,1516402633.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:14.238Z,1516402634.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:14.252Z,1516402634.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:14.635Z,1516402634.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:14.649Z,1516402634.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:15.028Z,1516402635.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:15.043Z,1516402635.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:15.434Z,1516402635.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:15.448Z,1516402635.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:15.832Z,1516402635.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:15.847Z,1516402635.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:16.231Z,1516402636.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:16.246Z,1516402636.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:16.635Z,1516402636.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:16.649Z,1516402636.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:17.032Z,1516402637.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:17.048Z,1516402637.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:17.434Z,1516402637.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:17.450Z,1516402637.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:17.824Z,1516402637.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:17.838Z,1516402637.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:18.231Z,1516402638.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:18.246Z,1516402638.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:18.632Z,1516402638.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:18.651Z,1516402638.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:19.038Z,1516402639.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:19.052Z,1516402639.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:19.434Z,1516402639.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:19.448Z,1516402639.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:19.831Z,1516402639.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:19.851Z,1516402639.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:20.225Z,1516402640.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:20.239Z,1516402640.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:20.634Z,1516402640.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:20.649Z,1516402640.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:21.038Z,1516402641.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:21.052Z,1516402641.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:21.434Z,1516402641.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:21.454Z,1516402641.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:21.820Z,1516402641.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:21.842Z,1516402641.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:22.225Z,1516402642.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:22.250Z,1516402642.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:22.637Z,1516402642.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:22.651Z,1516402642.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:23.037Z,1516402643.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:23.051Z,1516402643.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:23.436Z,1516402643.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:23.455Z,1516402643.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:23.832Z,1516402643.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:23.846Z,1516402643.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:24.231Z,1516402644.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:24.251Z,1516402644.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:24.636Z,1516402644.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:24.655Z,1516402644.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:25.038Z,1516402645.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:25.052Z,1516402645.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:25.437Z,1516402645.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:25.451Z,1516402645.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:25.832Z,1516402645.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:25.846Z,1516402645.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:26.232Z,1516402646.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:26.246Z,1516402646.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:26.637Z,1516402646.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:26.651Z,1516402646.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:27.037Z,1516402647.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:27.051Z,1516402647.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:27.438Z,1516402647.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:27.451Z,1516402647.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:27.832Z,1516402647.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:27.847Z,1516402647.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:28.235Z,1516402648.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:28.249Z,1516402648.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:28.638Z,1516402648.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:28.652Z,1516402648.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:29.037Z,1516402649.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:29.052Z,1516402649.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:29.437Z,1516402649.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:29.459Z,1516402649.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:29.834Z,1516402649.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:29.848Z,1516402649.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:30.232Z,1516402650.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:30.251Z,1516402650.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:30.637Z,1516402650.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:30.659Z,1516402650.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:31.039Z,1516402651.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:31.052Z,1516402651.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:31.436Z,1516402651.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:31.452Z,1516402651.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:31.832Z,1516402651.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:31.847Z,1516402651.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:32.232Z,1516402652.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:32.259Z,1516402652.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:32.636Z,1516402652.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:32.651Z,1516402652.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:33.036Z,1516402653.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:33.055Z,1516402653.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:33.437Z,1516402653.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:33.451Z,1516402653.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:33.832Z,1516402653.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:33.846Z,1516402653.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:34.231Z,1516402654.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:34.251Z,1516402654.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:34.637Z,1516402654.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:34.651Z,1516402654.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:35.033Z,1516402655.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:35.048Z,1516402655.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:35.436Z,1516402655.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:35.455Z,1516402655.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:35.824Z,1516402655.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:35.843Z,1516402655.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:36.231Z,1516402656.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:36.251Z,1516402656.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:36.636Z,1516402656.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:36.655Z,1516402656.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:37.037Z,1516402657.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:37.051Z,1516402657.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:37.436Z,1516402657.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:37.455Z,1516402657.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:37.826Z,1516402657.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:37.844Z,1516402657.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:38.227Z,1516402658.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:38.241Z,1516402658.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:38.636Z,1516402658.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:38.651Z,1516402658.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:39.038Z,1516402659.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:39.052Z,1516402659.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:39.437Z,1516402659.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:39.451Z,1516402659.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:39.832Z,1516402659.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:39.846Z,1516402659.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:40.227Z,1516402660.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:40.247Z,1516402660.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:40.638Z,1516402660.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:40.652Z,1516402660.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:41.037Z,1516402661.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:41.052Z,1516402661.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:41.436Z,1516402661.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:41.455Z,1516402661.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:41.832Z,1516402661.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:41.847Z,1516402661.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:42.231Z,1516402662.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:42.251Z,1516402662.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:42.636Z,1516402662.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:42.655Z,1516402662.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:43.037Z,1516402663.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:43.051Z,1516402663.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:43.437Z,1516402663.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:43.451Z,1516402663.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:43.826Z,1516402663.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:43.845Z,1516402663.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:44.226Z,1516402664.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:44.252Z,1516402664.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:44.637Z,1516402664.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:44.659Z,1516402664.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:45.038Z,1516402665.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:45.052Z,1516402665.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:45.437Z,1516402665.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:45.451Z,1516402665.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:45.824Z,1516402665.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:45.846Z,1516402665.846 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:45.846Z,1516402665.846 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-01-19T22:57:45.846Z,1516402665.846 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T22:57:45.848Z,1516402665.848 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:45.848Z,1516402665.848 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-01-19T22:57:45.848Z,1516402665.848 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T22:57:45.854Z,1516402665.854 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:45.857Z,1516402665.857 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2018-01-19T22:57:45.857Z,1516402665.857 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T22:57:45.880Z,1516402665.880 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T22:57:45.880Z,1516402665.880 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T22:57:45.885Z,1516402665.885 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T22:57:46.222Z,1516402666.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:46.263Z,1516402666.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T22:57:46.263Z,1516402666.263 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-01-19T22:57:46.264Z,1516402666.264 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T22:57:46.264Z,1516402666.264 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-01-19T22:57:46.264Z,1516402666.264 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T22:57:46.264Z,1516402666.264 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2018-01-19T22:57:46.639Z,1516402666.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:46.652Z,1516402666.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T22:57:46.652Z,1516402666.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:57:46.652Z,1516402666.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:57:46.653Z,1516402666.653 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T22:57:46.653Z,1516402666.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:57:46.654Z,1516402666.654 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:57:46.654Z,1516402666.654 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T22:57:46.654Z,1516402666.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T22:57:46.655Z,1516402666.655 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T22:57:47.037Z,1516402667.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:47.051Z,1516402667.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T22:57:47.052Z,1516402667.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:47.437Z,1516402667.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:47.458Z,1516402667.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T22:57:47.459Z,1516402667.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:47.820Z,1516402667.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:47.846Z,1516402667.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T22:57:47.846Z,1516402667.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:48.231Z,1516402668.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:48.250Z,1516402668.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T22:57:48.251Z,1516402668.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:48.637Z,1516402668.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:48.651Z,1516402668.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T22:57:48.652Z,1516402668.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:49.038Z,1516402669.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:49.058Z,1516402669.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T22:57:49.059Z,1516402669.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:49.430Z,1516402669.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:49.450Z,1516402669.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T22:57:49.451Z,1516402669.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:49.820Z,1516402669.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:49.845Z,1516402669.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T22:57:49.846Z,1516402669.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:50.219Z,1516402670.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:50.255Z,1516402670.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T22:57:50.256Z,1516402670.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:50.644Z,1516402670.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:50.658Z,1516402670.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T22:57:50.659Z,1516402670.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:51.041Z,1516402671.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:51.055Z,1516402671.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T22:57:51.056Z,1516402671.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:51.426Z,1516402671.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:51.458Z,1516402671.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T22:57:51.459Z,1516402671.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:51.818Z,1516402671.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:51.844Z,1516402671.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T22:57:51.845Z,1516402671.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:52.225Z,1516402672.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:52.262Z,1516402672.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T22:57:52.263Z,1516402672.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:52.624Z,1516402672.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:52.656Z,1516402672.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T22:57:52.657Z,1516402672.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:53.032Z,1516402673.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:53.066Z,1516402673.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T22:57:53.067Z,1516402673.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:53.449Z,1516402673.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:53.463Z,1516402673.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T22:57:53.464Z,1516402673.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:53.845Z,1516402673.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:53.858Z,1516402673.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T22:57:53.859Z,1516402673.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:54.227Z,1516402674.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:54.262Z,1516402674.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T22:57:54.263Z,1516402674.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:54.627Z,1516402674.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:54.657Z,1516402674.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T22:57:54.658Z,1516402674.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:55.022Z,1516402675.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:55.035Z,1516402675.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T22:57:55.036Z,1516402675.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:55.420Z,1516402675.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:55.434Z,1516402675.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T22:57:55.435Z,1516402675.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:55.810Z,1516402675.810 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T22:57:55.810Z,1516402675.810 [NAL9602] Data Fault, FailCount= 5
2018-01-19T22:57:55.810Z,1516402675.810 [NAL9602](ERROR): Data Fault
2018-01-19T22:57:55.827Z,1516402675.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:55.870Z,1516402675.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T22:57:55.871Z,1516402675.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:55.897Z,1516402675.897 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T22:57:55.897Z,1516402675.897 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-19T22:57:56.207Z,1516402676.207 [NAL9602](INFO): Powering down
2018-01-19T22:57:56.225Z,1516402676.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:56.238Z,1516402676.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T22:57:56.239Z,1516402676.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:56.266Z,1516402676.266 [CBIT](INFO): Critical error at 20180119T225755
2018-01-19T22:57:56.626Z,1516402676.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:56.639Z,1516402676.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T22:57:56.640Z,1516402676.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:57.025Z,1516402677.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:57.039Z,1516402677.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T22:57:57.040Z,1516402677.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:57:57.422Z,1516402677.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:57:57.435Z,1516402677.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T22:57:57.436Z,1516402677.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:00.518Z,1516402680.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:00.532Z,1516402680.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-01-19T22:58:00.533Z,1516402680.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:00.625Z,1516402680.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:00.667Z,1516402680.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T22:58:00.668Z,1516402680.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:00.991Z,1516402680.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:01.021Z,1516402681.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T22:58:01.022Z,1516402681.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:01.391Z,1516402681.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:01.404Z,1516402681.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T22:58:01.429Z,1516402681.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:01.780Z,1516402681.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:01.794Z,1516402681.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-01-19T22:58:01.795Z,1516402681.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:02.191Z,1516402682.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:02.205Z,1516402682.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T22:58:02.206Z,1516402682.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:02.585Z,1516402682.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:02.599Z,1516402682.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T22:58:02.600Z,1516402682.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:02.984Z,1516402682.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:02.998Z,1516402682.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T22:58:02.999Z,1516402682.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:03.389Z,1516402683.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:03.403Z,1516402683.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T22:58:03.404Z,1516402683.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:03.786Z,1516402683.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:03.799Z,1516402683.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T22:58:03.800Z,1516402683.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:04.191Z,1516402684.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:04.205Z,1516402684.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T22:58:04.206Z,1516402684.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:04.589Z,1516402684.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:04.609Z,1516402684.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T22:58:04.610Z,1516402684.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:04.993Z,1516402684.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:05.006Z,1516402685.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T22:58:05.007Z,1516402685.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:05.387Z,1516402685.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:05.402Z,1516402685.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T22:58:05.403Z,1516402685.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:05.792Z,1516402685.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:05.807Z,1516402685.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T22:58:05.808Z,1516402685.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:06.192Z,1516402686.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:06.207Z,1516402686.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:06.588Z,1516402686.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:06.603Z,1516402686.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:06.988Z,1516402686.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:07.003Z,1516402687.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:07.386Z,1516402687.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:07.400Z,1516402687.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:07.786Z,1516402687.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:07.800Z,1516402687.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:08.199Z,1516402688.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:08.213Z,1516402688.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:08.586Z,1516402688.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:08.600Z,1516402688.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:08.982Z,1516402688.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:09.001Z,1516402689.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:09.387Z,1516402689.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:09.413Z,1516402689.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:09.786Z,1516402689.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:09.800Z,1516402689.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:10.192Z,1516402690.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:10.206Z,1516402690.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:10.589Z,1516402690.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:10.612Z,1516402690.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:10.994Z,1516402690.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:11.007Z,1516402691.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:11.394Z,1516402691.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:11.408Z,1516402691.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:11.789Z,1516402691.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:11.808Z,1516402691.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:12.186Z,1516402692.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:12.207Z,1516402692.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:12.594Z,1516402692.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:12.608Z,1516402692.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:12.997Z,1516402692.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:13.011Z,1516402693.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:13.394Z,1516402693.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:13.407Z,1516402693.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:13.788Z,1516402693.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:13.802Z,1516402693.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:14.189Z,1516402694.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:14.215Z,1516402694.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:14.586Z,1516402694.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:14.600Z,1516402694.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:14.988Z,1516402694.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:15.002Z,1516402695.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:15.386Z,1516402695.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:15.409Z,1516402695.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:15.794Z,1516402695.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:15.808Z,1516402695.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:16.194Z,1516402696.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:16.208Z,1516402696.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:16.589Z,1516402696.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:16.608Z,1516402696.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:16.986Z,1516402696.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:17.006Z,1516402697.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:17.394Z,1516402697.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:17.409Z,1516402697.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:17.789Z,1516402697.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:17.808Z,1516402697.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:18.186Z,1516402698.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:18.206Z,1516402698.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:18.594Z,1516402698.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:18.609Z,1516402698.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:18.989Z,1516402698.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:19.008Z,1516402699.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:19.386Z,1516402699.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:19.406Z,1516402699.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:19.789Z,1516402699.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:19.807Z,1516402699.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:20.195Z,1516402700.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:20.209Z,1516402700.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:20.586Z,1516402700.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:20.611Z,1516402700.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:20.976Z,1516402700.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:21.007Z,1516402701.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:21.395Z,1516402701.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:21.409Z,1516402701.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:21.778Z,1516402701.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:21.812Z,1516402701.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:22.178Z,1516402702.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:22.210Z,1516402702.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:22.595Z,1516402702.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:22.609Z,1516402702.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:22.979Z,1516402702.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:23.010Z,1516402703.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:23.378Z,1516402703.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:23.409Z,1516402703.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:23.794Z,1516402703.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:23.808Z,1516402703.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:24.178Z,1516402704.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:24.210Z,1516402704.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:24.580Z,1516402704.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:24.610Z,1516402704.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:24.983Z,1516402704.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:25.007Z,1516402705.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:25.386Z,1516402705.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:25.426Z,1516402705.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:25.776Z,1516402705.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:25.799Z,1516402705.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:26.189Z,1516402706.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:26.203Z,1516402706.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:26.589Z,1516402706.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:26.603Z,1516402706.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:26.985Z,1516402706.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:26.999Z,1516402706.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:27.386Z,1516402707.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:27.400Z,1516402707.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:27.787Z,1516402707.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:27.801Z,1516402707.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:28.184Z,1516402708.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:28.211Z,1516402708.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:28.594Z,1516402708.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:28.608Z,1516402708.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:28.993Z,1516402708.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:29.007Z,1516402709.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:29.389Z,1516402709.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:29.404Z,1516402709.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:29.790Z,1516402709.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:29.805Z,1516402709.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:30.188Z,1516402710.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:30.203Z,1516402710.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:30.586Z,1516402710.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:30.602Z,1516402710.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:30.989Z,1516402710.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:31.007Z,1516402711.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:31.386Z,1516402711.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:31.400Z,1516402711.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:31.788Z,1516402711.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:31.802Z,1516402711.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:32.186Z,1516402712.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:32.200Z,1516402712.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:32.589Z,1516402712.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:32.607Z,1516402712.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:32.983Z,1516402712.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:32.998Z,1516402712.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:33.389Z,1516402713.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:33.407Z,1516402713.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:33.786Z,1516402713.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:33.800Z,1516402713.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:34.186Z,1516402714.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:34.200Z,1516402714.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:34.590Z,1516402714.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:34.603Z,1516402714.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:34.992Z,1516402714.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:35.006Z,1516402715.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:35.392Z,1516402715.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:35.406Z,1516402715.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:35.790Z,1516402715.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:35.804Z,1516402715.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:36.186Z,1516402716.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:36.207Z,1516402716.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:36.586Z,1516402716.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:36.600Z,1516402716.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:36.989Z,1516402716.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:37.003Z,1516402717.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:37.392Z,1516402717.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:37.406Z,1516402717.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:37.788Z,1516402717.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:37.802Z,1516402717.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:38.189Z,1516402718.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:38.207Z,1516402718.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:38.587Z,1516402718.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:38.600Z,1516402718.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:38.988Z,1516402718.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:39.003Z,1516402719.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:39.392Z,1516402719.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:39.406Z,1516402719.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:39.792Z,1516402719.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:39.806Z,1516402719.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:40.192Z,1516402720.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:40.207Z,1516402720.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:40.591Z,1516402720.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:40.605Z,1516402720.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:40.992Z,1516402720.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:41.006Z,1516402721.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:41.392Z,1516402721.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:41.407Z,1516402721.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:41.789Z,1516402721.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:41.804Z,1516402721.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:42.192Z,1516402722.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:42.206Z,1516402722.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:42.590Z,1516402722.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:42.604Z,1516402722.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:42.993Z,1516402722.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:43.007Z,1516402723.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:43.388Z,1516402723.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:43.402Z,1516402723.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:43.788Z,1516402723.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:43.802Z,1516402723.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:44.192Z,1516402724.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:44.206Z,1516402724.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:44.593Z,1516402724.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:44.607Z,1516402724.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:44.987Z,1516402724.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:45.003Z,1516402725.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:45.391Z,1516402725.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:45.406Z,1516402725.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:45.792Z,1516402725.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:45.806Z,1516402725.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:46.191Z,1516402726.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:46.214Z,1516402726.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:46.601Z,1516402726.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:46.618Z,1516402726.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:46.992Z,1516402726.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:47.006Z,1516402727.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:47.384Z,1516402727.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:47.426Z,1516402727.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:47.824Z,1516402727.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:47.874Z,1516402727.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:48.184Z,1516402728.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:48.256Z,1516402728.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:48.582Z,1516402728.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:48.613Z,1516402728.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:48.982Z,1516402728.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:49.024Z,1516402729.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:49.386Z,1516402729.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:49.400Z,1516402729.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:49.783Z,1516402729.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:49.827Z,1516402729.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:50.205Z,1516402730.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:50.258Z,1516402730.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:50.620Z,1516402730.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:50.676Z,1516402730.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:50.988Z,1516402730.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:51.042Z,1516402731.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:51.391Z,1516402731.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:51.454Z,1516402731.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:51.788Z,1516402731.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:51.843Z,1516402731.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:52.184Z,1516402732.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:52.228Z,1516402732.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:52.586Z,1516402732.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:52.646Z,1516402732.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:53.014Z,1516402733.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:53.066Z,1516402733.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:53.384Z,1516402733.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:53.426Z,1516402733.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:53.788Z,1516402733.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:53.822Z,1516402733.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:54.185Z,1516402734.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:54.239Z,1516402734.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:54.610Z,1516402734.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:54.654Z,1516402734.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:54.999Z,1516402734.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:55.034Z,1516402735.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:55.389Z,1516402735.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:55.411Z,1516402735.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:55.787Z,1516402735.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:55.802Z,1516402735.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:56.187Z,1516402736.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:56.201Z,1516402736.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:56.591Z,1516402736.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:56.611Z,1516402736.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:56.988Z,1516402736.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:57.003Z,1516402737.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:57.389Z,1516402737.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:57.403Z,1516402737.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:58:57.793Z,1516402737.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:58:57.807Z,1516402737.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:01.043Z,1516402741.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:01.057Z,1516402741.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:01.160Z,1516402741.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:01.183Z,1516402741.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:01.534Z,1516402741.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:01.548Z,1516402741.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:01.938Z,1516402741.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:01.952Z,1516402741.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:02.331Z,1516402742.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:02.346Z,1516402742.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:02.729Z,1516402742.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:02.750Z,1516402742.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:03.131Z,1516402743.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:03.144Z,1516402743.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:03.540Z,1516402743.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:03.567Z,1516402743.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:03.929Z,1516402743.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:03.959Z,1516402743.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:04.335Z,1516402744.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:04.350Z,1516402744.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:04.730Z,1516402744.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:04.744Z,1516402744.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:05.133Z,1516402745.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:05.147Z,1516402745.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:05.535Z,1516402745.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:05.549Z,1516402745.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:05.931Z,1516402745.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:05.946Z,1516402745.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:06.330Z,1516402746.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:06.357Z,1516402746.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:06.737Z,1516402746.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:06.751Z,1516402746.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:07.127Z,1516402747.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:07.142Z,1516402747.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:07.534Z,1516402747.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:07.548Z,1516402747.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:07.937Z,1516402747.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:07.951Z,1516402747.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:08.330Z,1516402748.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:08.344Z,1516402748.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:08.730Z,1516402748.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:08.751Z,1516402748.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:09.130Z,1516402749.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:09.151Z,1516402749.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:09.537Z,1516402749.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:09.551Z,1516402749.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:09.938Z,1516402749.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:09.952Z,1516402749.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:10.337Z,1516402750.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:10.351Z,1516402750.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:10.727Z,1516402750.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:10.742Z,1516402750.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:11.133Z,1516402751.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:11.151Z,1516402751.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:11.537Z,1516402751.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:11.551Z,1516402751.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:11.930Z,1516402751.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:11.945Z,1516402751.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:11.958Z,1516402751.958 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T22:59:12.333Z,1516402752.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:12.351Z,1516402752.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:12.737Z,1516402752.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:12.751Z,1516402752.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:13.127Z,1516402753.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:13.142Z,1516402753.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:13.544Z,1516402753.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:13.563Z,1516402753.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:13.937Z,1516402753.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:13.951Z,1516402753.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:14.331Z,1516402754.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:14.346Z,1516402754.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:14.733Z,1516402754.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:14.751Z,1516402754.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:15.137Z,1516402755.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:15.151Z,1516402755.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:15.537Z,1516402755.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:15.551Z,1516402755.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:15.933Z,1516402755.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:15.951Z,1516402755.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:16.337Z,1516402756.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:16.351Z,1516402756.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:16.731Z,1516402756.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:16.746Z,1516402756.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:17.133Z,1516402757.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:17.151Z,1516402757.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:17.537Z,1516402757.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:17.551Z,1516402757.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:17.931Z,1516402757.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:17.946Z,1516402757.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:18.330Z,1516402758.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:18.357Z,1516402758.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:18.738Z,1516402758.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:18.752Z,1516402758.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:19.132Z,1516402759.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:19.147Z,1516402759.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:19.533Z,1516402759.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:19.552Z,1516402759.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:19.939Z,1516402759.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:19.953Z,1516402759.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:20.320Z,1516402760.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:20.350Z,1516402760.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:20.739Z,1516402760.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:20.753Z,1516402760.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:21.135Z,1516402761.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:21.149Z,1516402761.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:21.540Z,1516402761.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:21.555Z,1516402761.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:21.934Z,1516402761.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:21.954Z,1516402761.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:22.324Z,1516402762.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:22.362Z,1516402762.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:22.726Z,1516402762.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:22.748Z,1516402762.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:23.132Z,1516402763.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:23.162Z,1516402763.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:23.522Z,1516402763.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:23.539Z,1516402763.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:23.924Z,1516402763.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:23.940Z,1516402763.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:24.331Z,1516402764.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:24.347Z,1516402764.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:24.731Z,1516402764.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:24.746Z,1516402764.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:25.123Z,1516402765.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:25.138Z,1516402765.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:25.534Z,1516402765.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:25.549Z,1516402765.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:25.928Z,1516402765.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:25.943Z,1516402765.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:26.328Z,1516402766.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:26.342Z,1516402766.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:26.733Z,1516402766.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:26.755Z,1516402766.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:27.138Z,1516402767.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:27.152Z,1516402767.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:27.531Z,1516402767.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:27.546Z,1516402767.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:27.934Z,1516402767.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:27.955Z,1516402767.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:28.330Z,1516402768.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:28.344Z,1516402768.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:28.731Z,1516402768.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:28.746Z,1516402768.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:29.134Z,1516402769.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:29.147Z,1516402769.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:29.538Z,1516402769.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:29.552Z,1516402769.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:29.932Z,1516402769.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:29.946Z,1516402769.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:30.334Z,1516402770.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:30.348Z,1516402770.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:30.739Z,1516402770.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:30.753Z,1516402770.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:31.132Z,1516402771.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:31.146Z,1516402771.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:31.534Z,1516402771.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:31.548Z,1516402771.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:31.938Z,1516402771.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:31.966Z,1516402771.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:32.333Z,1516402772.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:32.347Z,1516402772.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:32.735Z,1516402772.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:32.749Z,1516402772.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:33.138Z,1516402773.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:33.152Z,1516402773.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:33.539Z,1516402773.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:33.553Z,1516402773.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:33.935Z,1516402773.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:33.949Z,1516402773.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:34.331Z,1516402774.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:34.345Z,1516402774.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:34.732Z,1516402774.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:34.746Z,1516402774.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:35.135Z,1516402775.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:35.148Z,1516402775.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:35.539Z,1516402775.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:35.553Z,1516402775.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:35.931Z,1516402775.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:35.947Z,1516402775.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:36.334Z,1516402776.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:36.351Z,1516402776.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:36.738Z,1516402776.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:36.753Z,1516402776.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:37.132Z,1516402777.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:37.146Z,1516402777.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:37.533Z,1516402777.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:37.547Z,1516402777.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:37.930Z,1516402777.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:37.954Z,1516402777.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:38.320Z,1516402778.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:38.351Z,1516402778.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:38.738Z,1516402778.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:38.752Z,1516402778.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:39.138Z,1516402779.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:39.152Z,1516402779.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:39.538Z,1516402779.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:39.552Z,1516402779.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:39.934Z,1516402779.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:39.954Z,1516402779.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:40.338Z,1516402780.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:40.352Z,1516402780.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:40.724Z,1516402780.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:40.751Z,1516402780.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:41.138Z,1516402781.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:41.151Z,1516402781.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:41.527Z,1516402781.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:41.551Z,1516402781.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:41.920Z,1516402781.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:41.954Z,1516402781.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:42.322Z,1516402782.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:42.354Z,1516402782.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:42.738Z,1516402782.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:42.752Z,1516402782.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:43.124Z,1516402783.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:43.154Z,1516402783.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:43.526Z,1516402783.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:43.559Z,1516402783.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:43.938Z,1516402783.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:43.952Z,1516402783.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:44.324Z,1516402784.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:44.354Z,1516402784.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:44.738Z,1516402784.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:44.751Z,1516402784.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:45.138Z,1516402785.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:45.152Z,1516402785.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:45.524Z,1516402785.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:45.554Z,1516402785.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:45.926Z,1516402785.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:45.954Z,1516402785.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:46.339Z,1516402786.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:46.353Z,1516402786.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:46.720Z,1516402786.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:46.746Z,1516402786.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:47.130Z,1516402787.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:47.154Z,1516402787.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:47.528Z,1516402787.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:47.553Z,1516402787.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:47.920Z,1516402787.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:47.943Z,1516402787.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:48.322Z,1516402788.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:48.336Z,1516402788.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:48.727Z,1516402788.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:48.753Z,1516402788.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:49.123Z,1516402789.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:49.137Z,1516402789.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:49.531Z,1516402789.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:49.561Z,1516402789.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:49.928Z,1516402789.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:49.943Z,1516402789.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:50.331Z,1516402790.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:50.346Z,1516402790.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:50.726Z,1516402790.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:50.740Z,1516402790.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:51.135Z,1516402791.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:51.165Z,1516402791.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:51.535Z,1516402791.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:51.549Z,1516402791.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:51.931Z,1516402791.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:51.945Z,1516402791.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:52.328Z,1516402792.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:52.347Z,1516402792.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:52.727Z,1516402792.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:52.741Z,1516402792.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:53.134Z,1516402793.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:53.148Z,1516402793.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:53.535Z,1516402793.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:53.549Z,1516402793.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:53.931Z,1516402793.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:53.946Z,1516402793.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:54.334Z,1516402794.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:54.348Z,1516402794.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:54.735Z,1516402794.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:54.750Z,1516402794.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:55.129Z,1516402795.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:55.143Z,1516402795.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:55.527Z,1516402795.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:55.551Z,1516402795.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:55.935Z,1516402795.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:55.950Z,1516402795.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:55.983Z,1516402795.983 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T22:59:55.983Z,1516402795.983 [NAL9602] No Fault, FailCount= 5
2018-01-19T22:59:56.306Z,1516402796.306 [NAL9602](INFO): Powering up NAL9602
2018-01-19T22:59:56.334Z,1516402796.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:56.357Z,1516402796.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:56.738Z,1516402796.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:56.752Z,1516402796.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:57.139Z,1516402797.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:57.153Z,1516402797.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:57.529Z,1516402797.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:57.548Z,1516402797.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T22:59:57.940Z,1516402797.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T22:59:57.954Z,1516402797.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:01.025Z,1516402801.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:01.040Z,1516402801.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:01.140Z,1516402801.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:01.166Z,1516402801.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:01.495Z,1516402801.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:01.526Z,1516402801.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:01.890Z,1516402801.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:01.903Z,1516402801.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:02.289Z,1516402802.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:02.303Z,1516402802.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:02.691Z,1516402802.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:02.705Z,1516402802.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:03.088Z,1516402803.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:03.102Z,1516402803.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:03.492Z,1516402803.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:03.506Z,1516402803.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:03.889Z,1516402803.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:03.915Z,1516402803.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:04.294Z,1516402804.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:04.308Z,1516402804.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:04.698Z,1516402804.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:04.712Z,1516402804.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:05.096Z,1516402805.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:05.110Z,1516402805.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:05.501Z,1516402805.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:05.514Z,1516402805.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:05.898Z,1516402805.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:05.913Z,1516402805.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:06.298Z,1516402806.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:06.312Z,1516402806.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:06.691Z,1516402806.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:06.705Z,1516402806.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:07.103Z,1516402807.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:07.118Z,1516402807.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:07.471Z,1516402807.471 [NAL9602](INFO): NAL9602 initialized
2018-01-19T23:00:07.493Z,1516402807.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:07.519Z,1516402807.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:07.893Z,1516402807.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:07.917Z,1516402807.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:08.302Z,1516402808.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:08.317Z,1516402808.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:08.703Z,1516402808.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:08.718Z,1516402808.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:09.100Z,1516402809.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:09.119Z,1516402809.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:09.494Z,1516402809.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:09.509Z,1516402809.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:09.900Z,1516402809.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:09.919Z,1516402809.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:10.302Z,1516402810.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:10.316Z,1516402810.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:10.701Z,1516402810.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:10.715Z,1516402810.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:11.101Z,1516402811.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:11.115Z,1516402811.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:11.506Z,1516402811.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:11.520Z,1516402811.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:11.906Z,1516402811.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:11.925Z,1516402811.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:12.297Z,1516402812.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:12.317Z,1516402812.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:12.685Z,1516402812.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:12.711Z,1516402812.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:13.101Z,1516402813.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:13.115Z,1516402813.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:13.497Z,1516402813.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:13.523Z,1516402813.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:13.914Z,1516402813.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:13.928Z,1516402813.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:14.314Z,1516402814.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:14.328Z,1516402814.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:14.714Z,1516402814.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:14.728Z,1516402814.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:15.083Z,1516402815.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:15.118Z,1516402815.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:15.487Z,1516402815.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:15.494Z,1516402815.494 [PNI_TCM](ERROR): CRC does not match. Expected:0x29219 got:0x7361
2018-01-19T23:00:15.524Z,1516402815.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:15.890Z,1516402815.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:15.916Z,1516402815.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:16.288Z,1516402816.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:16.318Z,1516402816.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:16.693Z,1516402816.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:16.720Z,1516402816.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:17.107Z,1516402817.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:17.127Z,1516402817.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:17.506Z,1516402817.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:17.521Z,1516402817.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:17.919Z,1516402817.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:17.934Z,1516402817.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:18.287Z,1516402818.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:18.326Z,1516402818.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:18.693Z,1516402818.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:18.700Z,1516402818.700 [PNI_TCM](ERROR): CRC does not match. Expected:0x22684 got:0x7105
2018-01-19T23:00:18.722Z,1516402818.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:19.094Z,1516402819.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:19.120Z,1516402819.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:19.488Z,1516402819.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:19.522Z,1516402819.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:19.912Z,1516402819.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:19.926Z,1516402819.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:20.315Z,1516402820.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:20.335Z,1516402820.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:20.699Z,1516402820.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:20.735Z,1516402820.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:21.095Z,1516402821.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:21.125Z,1516402821.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:21.489Z,1516402821.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:21.527Z,1516402821.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:21.902Z,1516402821.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:21.917Z,1516402821.917 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2018-01-19T23:00:21.943Z,1516402821.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:22.299Z,1516402822.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:22.322Z,1516402822.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:22.695Z,1516402822.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:22.725Z,1516402822.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:23.114Z,1516402823.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:23.135Z,1516402823.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:23.520Z,1516402823.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:23.534Z,1516402823.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:23.903Z,1516402823.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:23.935Z,1516402823.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:24.296Z,1516402824.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:24.324Z,1516402824.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:24.692Z,1516402824.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:24.720Z,1516402824.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:25.090Z,1516402825.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:25.124Z,1516402825.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:25.493Z,1516402825.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:25.507Z,1516402825.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:25.910Z,1516402825.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:25.934Z,1516402825.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:26.302Z,1516402826.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:26.331Z,1516402826.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:26.708Z,1516402826.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:26.722Z,1516402826.722 [PNI_TCM](ERROR): CRC does not match. Expected:0x42549 got:0x3079
2018-01-19T23:00:26.747Z,1516402826.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:27.097Z,1516402827.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:27.111Z,1516402827.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:27.490Z,1516402827.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:27.511Z,1516402827.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:27.895Z,1516402827.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:27.938Z,1516402827.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:28.296Z,1516402828.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:28.313Z,1516402828.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:28.698Z,1516402828.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:28.712Z,1516402828.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:29.110Z,1516402829.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:29.140Z,1516402829.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:29.498Z,1516402829.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:29.537Z,1516402829.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:29.909Z,1516402829.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:29.939Z,1516402829.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:30.298Z,1516402830.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:30.313Z,1516402830.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:30.698Z,1516402830.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:30.712Z,1516402830.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:31.097Z,1516402831.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:31.139Z,1516402831.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:31.493Z,1516402831.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:31.521Z,1516402831.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:31.903Z,1516402831.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:31.917Z,1516402831.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:32.307Z,1516402832.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:32.321Z,1516402832.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:32.700Z,1516402832.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:32.741Z,1516402832.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:33.098Z,1516402833.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:33.116Z,1516402833.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:33.504Z,1516402833.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:33.518Z,1516402833.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:33.898Z,1516402833.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:33.912Z,1516402833.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:34.293Z,1516402834.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:34.322Z,1516402834.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:34.700Z,1516402834.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:34.718Z,1516402834.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:35.103Z,1516402835.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:35.119Z,1516402835.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:35.508Z,1516402835.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:35.521Z,1516402835.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:35.902Z,1516402835.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:35.940Z,1516402835.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:36.296Z,1516402836.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:36.313Z,1516402836.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:36.698Z,1516402836.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:36.715Z,1516402836.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:37.103Z,1516402837.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:37.123Z,1516402837.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:37.500Z,1516402837.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:37.540Z,1516402837.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:37.902Z,1516402837.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:37.920Z,1516402837.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:38.303Z,1516402838.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:38.320Z,1516402838.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:38.706Z,1516402838.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:38.720Z,1516402838.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:39.098Z,1516402839.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:39.123Z,1516402839.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:39.494Z,1516402839.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:39.508Z,1516402839.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:39.899Z,1516402839.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:39.918Z,1516402839.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:40.302Z,1516402840.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:40.318Z,1516402840.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:40.700Z,1516402840.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:40.747Z,1516402840.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:41.105Z,1516402841.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:41.123Z,1516402841.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:41.506Z,1516402841.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:41.523Z,1516402841.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:41.903Z,1516402841.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:41.923Z,1516402841.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:42.295Z,1516402842.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:42.327Z,1516402842.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:42.699Z,1516402842.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:42.713Z,1516402842.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:43.101Z,1516402843.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:43.120Z,1516402843.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:43.496Z,1516402843.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:43.514Z,1516402843.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:43.902Z,1516402843.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:43.922Z,1516402843.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:44.306Z,1516402844.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:44.320Z,1516402844.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:44.705Z,1516402844.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:44.727Z,1516402844.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:45.100Z,1516402845.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:45.122Z,1516402845.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:45.501Z,1516402845.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:45.515Z,1516402845.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:45.908Z,1516402845.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:45.922Z,1516402845.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:46.292Z,1516402846.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:46.322Z,1516402846.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:46.691Z,1516402846.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:46.723Z,1516402846.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:46.723Z,1516402846.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-01-19T23:00:46.723Z,1516402846.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:00:46.725Z,1516402846.725 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:46.725Z,1516402846.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-01-19T23:00:46.725Z,1516402846.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:00:46.727Z,1516402846.727 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:46.727Z,1516402846.727 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2018-01-19T23:00:46.727Z,1516402846.727 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:00:46.739Z,1516402846.739 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:00:46.739Z,1516402846.739 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:00:46.739Z,1516402846.739 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:00:47.119Z,1516402847.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:47.173Z,1516402847.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:00:47.173Z,1516402847.173 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-01-19T23:00:47.174Z,1516402847.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:00:47.174Z,1516402847.174 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-01-19T23:00:47.174Z,1516402847.174 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:00:47.174Z,1516402847.174 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2018-01-19T23:00:47.509Z,1516402847.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:47.533Z,1516402847.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:00:47.534Z,1516402847.534 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:00:47.534Z,1516402847.534 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:00:47.535Z,1516402847.535 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:00:47.536Z,1516402847.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:00:47.536Z,1516402847.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:00:47.536Z,1516402847.536 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:00:47.537Z,1516402847.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:00:47.537Z,1516402847.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:00:47.893Z,1516402847.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:47.932Z,1516402847.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:00:47.937Z,1516402847.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:48.291Z,1516402848.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:48.331Z,1516402848.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:00:48.332Z,1516402848.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:48.683Z,1516402848.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:48.702Z,1516402848.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:00:48.703Z,1516402848.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:49.092Z,1516402849.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:49.123Z,1516402849.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:00:49.123Z,1516402849.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:49.491Z,1516402849.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:49.528Z,1516402849.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:00:49.534Z,1516402849.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:49.902Z,1516402849.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:49.934Z,1516402849.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:00:49.935Z,1516402849.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:50.294Z,1516402850.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:50.308Z,1516402850.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:00:50.309Z,1516402850.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:50.706Z,1516402850.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:50.742Z,1516402850.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:00:50.743Z,1516402850.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:51.092Z,1516402851.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:51.106Z,1516402851.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:00:51.107Z,1516402851.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:51.491Z,1516402851.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:51.504Z,1516402851.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:00:51.506Z,1516402851.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:51.892Z,1516402851.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:51.910Z,1516402851.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:00:51.911Z,1516402851.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:52.291Z,1516402852.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:52.305Z,1516402852.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:00:52.306Z,1516402852.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:52.691Z,1516402852.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:52.705Z,1516402852.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:00:52.706Z,1516402852.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:53.118Z,1516402853.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:53.134Z,1516402853.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:00:53.135Z,1516402853.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:53.506Z,1516402853.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:53.553Z,1516402853.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:00:53.555Z,1516402853.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:53.897Z,1516402853.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:53.923Z,1516402853.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:00:53.924Z,1516402853.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:54.295Z,1516402854.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:54.331Z,1516402854.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:00:54.337Z,1516402854.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:54.692Z,1516402854.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:54.705Z,1516402854.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:00:54.706Z,1516402854.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:55.092Z,1516402855.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:55.106Z,1516402855.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:00:55.107Z,1516402855.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:55.492Z,1516402855.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:55.510Z,1516402855.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:00:55.511Z,1516402855.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:55.902Z,1516402855.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:55.916Z,1516402855.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:00:55.917Z,1516402855.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:55.920Z,1516402855.920 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T22:55:55.9Z
2018-01-19T23:00:55.920Z,1516402855.920 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T23:00:55.920Z,1516402855.920 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T23:00:56.298Z,1516402856.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:56.312Z,1516402856.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:00:56.313Z,1516402856.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:56.751Z,1516402856.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:56.768Z,1516402856.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:00:56.769Z,1516402856.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:00:57.096Z,1516402857.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:00:57.118Z,1516402857.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:00:57.119Z,1516402857.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:00.210Z,1516402860.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:00.224Z,1516402860.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-01-19T23:01:00.225Z,1516402860.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:00.313Z,1516402860.313 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180119T210901/Courier0044.lzma
2018-01-19T23:01:00.346Z,1516402860.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:00.363Z,1516402860.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:01:00.364Z,1516402860.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:00.709Z,1516402860.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:00.750Z,1516402860.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:01:00.751Z,1516402860.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:01.071Z,1516402861.071 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0044.lzma.bak
2018-01-19T23:01:01.071Z,1516402861.071 [DataOverHttps](INFO): SBD MOMSN=7724718
2018-01-19T23:01:01.118Z,1516402861.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:01.151Z,1516402861.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:01:01.152Z,1516402861.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:01.606Z,1516402861.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:01.620Z,1516402861.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-19T23:01:01.621Z,1516402861.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:01.908Z,1516402861.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:01.951Z,1516402861.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:01:01.957Z,1516402861.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:05.078Z,1516402865.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:05.108Z,1516402865.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:01:05.109Z,1516402865.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:05.211Z,1516402865.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:05.230Z,1516402865.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-19T23:01:05.231Z,1516402865.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:05.568Z,1516402865.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:05.582Z,1516402865.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-19T23:01:05.583Z,1516402865.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:05.978Z,1516402865.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:06.009Z,1516402866.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-19T23:01:06.010Z,1516402866.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:06.380Z,1516402866.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:06.406Z,1516402866.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-19T23:01:06.407Z,1516402866.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:06.764Z,1516402866.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:06.779Z,1516402866.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:09.874Z,1516402869.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:09.895Z,1516402869.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:09.981Z,1516402869.981 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180119T210901/Express0045.lzma
2018-01-19T23:01:10.002Z,1516402870.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:10.031Z,1516402870.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:10.382Z,1516402870.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:10.396Z,1516402870.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:10.739Z,1516402870.739 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0045.lzma.bak
2018-01-19T23:01:10.739Z,1516402870.739 [DataOverHttps](INFO): SBD MOMSN=7724721
2018-01-19T23:01:10.789Z,1516402870.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:10.803Z,1516402870.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:11.278Z,1516402871.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:11.292Z,1516402871.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:11.295Z,1516402871.295 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T23:01:11.295Z,1516402871.295 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T23:01:11.295Z,1516402871.295 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T23:01:11.573Z,1516402871.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:11.592Z,1516402871.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:14.666Z,1516402874.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:14.681Z,1516402874.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:14.780Z,1516402874.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:14.795Z,1516402874.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:15.142Z,1516402875.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:15.179Z,1516402875.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:15.546Z,1516402875.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:15.574Z,1516402875.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:15.951Z,1516402875.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:15.972Z,1516402875.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:16.335Z,1516402876.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:16.349Z,1516402876.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:16.732Z,1516402876.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:16.746Z,1516402876.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:17.133Z,1516402877.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:17.161Z,1516402877.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:17.538Z,1516402877.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:17.553Z,1516402877.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:17.942Z,1516402877.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:17.956Z,1516402877.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:18.338Z,1516402878.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:18.353Z,1516402878.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:18.742Z,1516402878.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:18.759Z,1516402878.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:19.139Z,1516402879.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:19.153Z,1516402879.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:19.538Z,1516402879.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:19.555Z,1516402879.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:19.938Z,1516402879.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:19.952Z,1516402879.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:20.333Z,1516402880.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:20.348Z,1516402880.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:20.732Z,1516402880.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:20.747Z,1516402880.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:21.139Z,1516402881.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:21.154Z,1516402881.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:21.551Z,1516402881.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:21.589Z,1516402881.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:21.936Z,1516402881.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:21.952Z,1516402881.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:22.333Z,1516402882.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:22.359Z,1516402882.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:22.736Z,1516402882.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:22.751Z,1516402882.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:23.130Z,1516402883.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:23.148Z,1516402883.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:23.533Z,1516402883.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:23.552Z,1516402883.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:23.938Z,1516402883.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:23.953Z,1516402883.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:24.338Z,1516402884.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:24.352Z,1516402884.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:24.738Z,1516402884.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:24.752Z,1516402884.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:25.132Z,1516402885.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:25.146Z,1516402885.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:25.532Z,1516402885.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:25.546Z,1516402885.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:25.933Z,1516402885.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:25.951Z,1516402885.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:26.338Z,1516402886.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:26.352Z,1516402886.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:26.727Z,1516402886.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:26.750Z,1516402886.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:27.150Z,1516402887.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:27.164Z,1516402887.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:27.550Z,1516402887.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:27.564Z,1516402887.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:27.947Z,1516402887.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:27.961Z,1516402887.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:28.340Z,1516402888.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:28.355Z,1516402888.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:28.723Z,1516402888.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:28.759Z,1516402888.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:29.141Z,1516402889.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:29.155Z,1516402889.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:29.539Z,1516402889.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:29.554Z,1516402889.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:29.943Z,1516402889.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:29.958Z,1516402889.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:30.346Z,1516402890.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:30.367Z,1516402890.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:30.749Z,1516402890.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:30.771Z,1516402890.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:31.139Z,1516402891.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:31.153Z,1516402891.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:31.539Z,1516402891.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:31.555Z,1516402891.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:31.934Z,1516402891.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:31.952Z,1516402891.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:32.324Z,1516402892.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:32.359Z,1516402892.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:32.733Z,1516402892.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:32.754Z,1516402892.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:33.149Z,1516402893.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:33.163Z,1516402893.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:33.546Z,1516402893.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:33.560Z,1516402893.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:33.942Z,1516402893.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:33.957Z,1516402893.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:34.330Z,1516402894.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:34.353Z,1516402894.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:34.723Z,1516402894.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:34.758Z,1516402894.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:35.140Z,1516402895.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:35.155Z,1516402895.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:35.530Z,1516402895.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:35.552Z,1516402895.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:35.943Z,1516402895.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:35.957Z,1516402895.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:36.346Z,1516402896.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:36.367Z,1516402896.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:36.746Z,1516402896.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:36.767Z,1516402896.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:37.139Z,1516402897.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:37.153Z,1516402897.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:37.523Z,1516402897.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:37.548Z,1516402897.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:37.930Z,1516402897.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:37.953Z,1516402897.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:38.337Z,1516402898.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:38.355Z,1516402898.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:38.723Z,1516402898.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:38.755Z,1516402898.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:39.145Z,1516402899.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:39.167Z,1516402899.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:39.549Z,1516402899.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:39.563Z,1516402899.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:39.946Z,1516402899.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:39.967Z,1516402899.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:40.329Z,1516402900.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:40.343Z,1516402900.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:40.731Z,1516402900.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:40.745Z,1516402900.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:41.130Z,1516402901.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:41.157Z,1516402901.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:41.539Z,1516402901.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:41.555Z,1516402901.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:41.941Z,1516402901.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:41.962Z,1516402901.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:42.346Z,1516402902.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:42.367Z,1516402902.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:42.749Z,1516402902.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:42.763Z,1516402902.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:43.140Z,1516402903.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:43.154Z,1516402903.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:43.539Z,1516402903.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:43.553Z,1516402903.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:43.930Z,1516402903.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:43.953Z,1516402903.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:44.324Z,1516402904.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:44.358Z,1516402904.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:44.733Z,1516402904.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:44.749Z,1516402904.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:45.146Z,1516402905.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:45.167Z,1516402905.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:45.549Z,1516402905.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:45.563Z,1516402905.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:45.946Z,1516402905.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:45.967Z,1516402905.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:46.339Z,1516402906.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:46.355Z,1516402906.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:46.723Z,1516402906.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:46.750Z,1516402906.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:47.140Z,1516402907.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:47.155Z,1516402907.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:47.530Z,1516402907.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:47.553Z,1516402907.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:47.943Z,1516402907.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:47.957Z,1516402907.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:48.346Z,1516402908.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:48.367Z,1516402908.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:48.749Z,1516402908.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:48.763Z,1516402908.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:49.140Z,1516402909.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:49.154Z,1516402909.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:49.539Z,1516402909.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:49.554Z,1516402909.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:49.944Z,1516402909.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:49.958Z,1516402909.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:50.341Z,1516402910.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:50.355Z,1516402910.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:50.729Z,1516402910.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:50.755Z,1516402910.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:51.150Z,1516402911.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:51.164Z,1516402911.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:51.550Z,1516402911.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:51.564Z,1516402911.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:51.938Z,1516402911.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:51.968Z,1516402911.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:52.339Z,1516402912.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:52.355Z,1516402912.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:52.723Z,1516402912.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:52.755Z,1516402912.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:53.140Z,1516402913.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:53.155Z,1516402913.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:53.527Z,1516402913.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:53.558Z,1516402913.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:53.941Z,1516402913.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:53.962Z,1516402913.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:54.346Z,1516402914.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:54.366Z,1516402914.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:54.750Z,1516402914.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:54.764Z,1516402914.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:55.123Z,1516402915.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:55.156Z,1516402915.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:55.538Z,1516402915.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:55.558Z,1516402915.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:55.944Z,1516402915.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:55.959Z,1516402915.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:56.324Z,1516402916.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:56.356Z,1516402916.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:56.722Z,1516402916.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:56.748Z,1516402916.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:57.154Z,1516402917.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:57.168Z,1516402917.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:57.547Z,1516402917.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:57.561Z,1516402917.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:57.949Z,1516402917.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:57.971Z,1516402917.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:58.332Z,1516402918.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:58.363Z,1516402918.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:58.723Z,1516402918.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:58.757Z,1516402918.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:59.144Z,1516402919.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:59.159Z,1516402919.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:59.527Z,1516402919.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:59.558Z,1516402919.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:01:59.953Z,1516402919.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:01:59.967Z,1516402919.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:00.342Z,1516402920.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:00.367Z,1516402920.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:00.746Z,1516402920.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:00.763Z,1516402920.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:01.124Z,1516402921.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:01.160Z,1516402921.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:01.531Z,1516402921.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:01.556Z,1516402921.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:01.946Z,1516402921.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:01.972Z,1516402921.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:02.354Z,1516402922.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:02.368Z,1516402922.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:02.734Z,1516402922.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:02.760Z,1516402922.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:03.128Z,1516402923.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:03.154Z,1516402923.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:03.531Z,1516402923.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:03.564Z,1516402923.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:03.934Z,1516402923.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:03.960Z,1516402923.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:04.350Z,1516402924.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:04.368Z,1516402924.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:04.750Z,1516402924.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:04.775Z,1516402924.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:05.133Z,1516402925.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:05.163Z,1516402925.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:05.528Z,1516402925.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:05.563Z,1516402925.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:05.935Z,1516402925.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:05.968Z,1516402925.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:06.335Z,1516402926.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:06.369Z,1516402926.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:06.739Z,1516402926.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:06.765Z,1516402926.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:07.128Z,1516402927.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:07.166Z,1516402927.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:07.525Z,1516402927.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:07.540Z,1516402927.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:07.959Z,1516402927.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:07.980Z,1516402927.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:08.338Z,1516402928.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:08.366Z,1516402928.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:08.734Z,1516402928.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:08.764Z,1516402928.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:09.132Z,1516402929.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:09.146Z,1516402929.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:09.531Z,1516402929.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:09.545Z,1516402929.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:09.934Z,1516402929.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:09.949Z,1516402929.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:10.350Z,1516402930.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:10.379Z,1516402930.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:10.738Z,1516402930.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:10.770Z,1516402930.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:11.129Z,1516402931.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:11.143Z,1516402931.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:11.533Z,1516402931.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:11.547Z,1516402931.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:11.946Z,1516402931.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:11.977Z,1516402931.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:15.054Z,1516402935.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:15.076Z,1516402935.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:15.194Z,1516402935.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:15.227Z,1516402935.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:15.528Z,1516402935.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:15.547Z,1516402935.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:15.931Z,1516402935.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:15.945Z,1516402935.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:16.324Z,1516402936.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:16.347Z,1516402936.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:16.732Z,1516402936.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:16.751Z,1516402936.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:17.146Z,1516402937.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:17.160Z,1516402937.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:17.535Z,1516402937.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:17.549Z,1516402937.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:17.946Z,1516402937.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:17.977Z,1516402937.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:18.336Z,1516402938.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:18.349Z,1516402938.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:18.735Z,1516402938.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:18.749Z,1516402938.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:19.135Z,1516402939.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:19.155Z,1516402939.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:19.536Z,1516402939.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:19.550Z,1516402939.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:19.935Z,1516402939.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:19.955Z,1516402939.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:20.338Z,1516402940.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:20.359Z,1516402940.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:20.738Z,1516402940.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:20.755Z,1516402940.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:21.135Z,1516402941.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:21.155Z,1516402941.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:21.531Z,1516402941.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:21.545Z,1516402941.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:21.938Z,1516402941.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:21.952Z,1516402941.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:22.336Z,1516402942.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:22.355Z,1516402942.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:22.736Z,1516402942.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:22.755Z,1516402942.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:23.135Z,1516402943.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:23.149Z,1516402943.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:23.534Z,1516402943.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:23.548Z,1516402943.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:23.936Z,1516402943.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:23.951Z,1516402943.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:24.337Z,1516402944.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:24.359Z,1516402944.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:24.736Z,1516402944.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:24.755Z,1516402944.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:25.135Z,1516402945.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:25.149Z,1516402945.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:25.528Z,1516402945.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:25.546Z,1516402945.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:25.937Z,1516402945.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:25.952Z,1516402945.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:26.338Z,1516402946.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:26.352Z,1516402946.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:26.738Z,1516402946.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:26.759Z,1516402946.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:27.130Z,1516402947.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:27.144Z,1516402947.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:27.531Z,1516402947.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:27.545Z,1516402947.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:27.938Z,1516402947.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:27.952Z,1516402947.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:28.335Z,1516402948.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:28.355Z,1516402948.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:28.738Z,1516402948.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:28.752Z,1516402948.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:29.133Z,1516402949.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:29.147Z,1516402949.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:29.535Z,1516402949.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:29.550Z,1516402949.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:29.938Z,1516402949.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:29.953Z,1516402949.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:30.342Z,1516402950.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:30.356Z,1516402950.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:30.734Z,1516402950.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:30.761Z,1516402950.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:31.136Z,1516402951.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:31.150Z,1516402951.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:31.536Z,1516402951.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:31.550Z,1516402951.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:31.943Z,1516402951.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:31.958Z,1516402951.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:32.342Z,1516402952.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:32.356Z,1516402952.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:32.742Z,1516402952.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:32.756Z,1516402952.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:33.126Z,1516402953.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:33.151Z,1516402953.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:33.536Z,1516402953.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:33.555Z,1516402953.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:33.933Z,1516402953.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:33.951Z,1516402953.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:34.343Z,1516402954.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:34.357Z,1516402954.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:34.745Z,1516402954.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:34.759Z,1516402954.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:35.146Z,1516402955.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:35.166Z,1516402955.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:35.530Z,1516402955.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:35.549Z,1516402955.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:35.928Z,1516402955.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:35.950Z,1516402955.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:36.334Z,1516402956.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:36.348Z,1516402956.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:36.719Z,1516402956.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:36.753Z,1516402956.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:37.142Z,1516402957.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:37.161Z,1516402957.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:37.550Z,1516402957.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:37.564Z,1516402957.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:37.943Z,1516402957.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:37.959Z,1516402957.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:38.323Z,1516402958.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:38.350Z,1516402958.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:38.719Z,1516402958.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:38.763Z,1516402958.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:39.121Z,1516402959.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:39.144Z,1516402959.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:39.524Z,1516402959.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:39.555Z,1516402959.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:39.927Z,1516402959.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:39.969Z,1516402959.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:40.330Z,1516402960.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:40.360Z,1516402960.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:40.742Z,1516402960.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:40.771Z,1516402960.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:41.133Z,1516402961.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:41.167Z,1516402961.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:41.531Z,1516402961.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:41.551Z,1516402961.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:41.931Z,1516402961.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:41.951Z,1516402961.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:42.333Z,1516402962.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:42.347Z,1516402962.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:42.724Z,1516402962.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:42.742Z,1516402962.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:43.146Z,1516402963.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:43.175Z,1516402963.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:43.542Z,1516402963.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:43.578Z,1516402963.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:43.931Z,1516402963.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:43.951Z,1516402963.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:44.333Z,1516402964.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:44.347Z,1516402964.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:44.733Z,1516402964.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:44.747Z,1516402964.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:45.126Z,1516402965.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:45.141Z,1516402965.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:45.531Z,1516402965.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:45.546Z,1516402965.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:45.927Z,1516402965.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:45.947Z,1516402965.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:46.334Z,1516402966.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:46.355Z,1516402966.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:46.746Z,1516402966.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:46.776Z,1516402966.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:47.146Z,1516402967.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:47.178Z,1516402967.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:47.529Z,1516402967.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:47.544Z,1516402967.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:47.932Z,1516402967.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:47.951Z,1516402967.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:48.333Z,1516402968.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:48.347Z,1516402968.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:48.732Z,1516402968.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:48.747Z,1516402968.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:49.134Z,1516402969.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:49.149Z,1516402969.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:49.534Z,1516402969.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:49.548Z,1516402969.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:49.934Z,1516402969.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:49.949Z,1516402969.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:50.329Z,1516402970.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:50.347Z,1516402970.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:50.732Z,1516402970.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:50.746Z,1516402970.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:51.123Z,1516402971.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:51.146Z,1516402971.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:51.531Z,1516402971.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:51.545Z,1516402971.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:51.932Z,1516402971.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:51.946Z,1516402971.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:52.334Z,1516402972.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:52.348Z,1516402972.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:52.746Z,1516402972.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:52.760Z,1516402972.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:53.137Z,1516402973.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:53.151Z,1516402973.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:53.535Z,1516402973.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:53.549Z,1516402973.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:53.931Z,1516402973.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:53.946Z,1516402973.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:54.333Z,1516402974.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:54.346Z,1516402974.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:54.727Z,1516402974.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:54.741Z,1516402974.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:55.136Z,1516402975.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:55.155Z,1516402975.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:55.542Z,1516402975.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:55.556Z,1516402975.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:55.936Z,1516402975.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:55.959Z,1516402975.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:56.335Z,1516402976.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:56.349Z,1516402976.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:56.732Z,1516402976.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:56.750Z,1516402976.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:57.129Z,1516402977.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:57.143Z,1516402977.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:57.527Z,1516402977.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:57.557Z,1516402977.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:57.932Z,1516402977.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:57.947Z,1516402977.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:58.336Z,1516402978.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:58.355Z,1516402978.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:58.738Z,1516402978.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:58.752Z,1516402978.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:59.137Z,1516402979.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:59.159Z,1516402979.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:59.535Z,1516402979.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:59.550Z,1516402979.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:02:59.931Z,1516402979.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:02:59.946Z,1516402979.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:00.330Z,1516402980.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:00.357Z,1516402980.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:00.722Z,1516402980.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:00.744Z,1516402980.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:01.140Z,1516402981.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:01.155Z,1516402981.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:01.541Z,1516402981.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:01.556Z,1516402981.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:01.937Z,1516402981.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:01.980Z,1516402981.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:02.331Z,1516402982.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:02.345Z,1516402982.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:02.728Z,1516402982.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:02.759Z,1516402982.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:03.121Z,1516402983.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:03.143Z,1516402983.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:03.536Z,1516402983.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:03.550Z,1516402983.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:03.926Z,1516402983.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:03.957Z,1516402983.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:04.342Z,1516402984.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:04.356Z,1516402984.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:04.746Z,1516402984.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:04.760Z,1516402984.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:05.143Z,1516402985.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:05.157Z,1516402985.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:05.519Z,1516402985.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:05.551Z,1516402985.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:05.927Z,1516402985.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:05.952Z,1516402985.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:06.324Z,1516402986.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:06.359Z,1516402986.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:06.727Z,1516402986.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:06.758Z,1516402986.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:07.134Z,1516402987.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:07.159Z,1516402987.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:07.546Z,1516402987.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:07.565Z,1516402987.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:07.934Z,1516402987.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:07.968Z,1516402987.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:08.350Z,1516402988.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:08.364Z,1516402988.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:08.731Z,1516402988.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:08.762Z,1516402988.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:09.131Z,1516402989.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:09.160Z,1516402989.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:09.531Z,1516402989.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:09.554Z,1516402989.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:09.927Z,1516402989.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:09.963Z,1516402989.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:10.342Z,1516402990.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:10.365Z,1516402990.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:10.746Z,1516402990.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:10.775Z,1516402990.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:11.142Z,1516402991.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:11.167Z,1516402991.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:11.531Z,1516402991.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:11.571Z,1516402991.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:11.930Z,1516402991.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:11.945Z,1516402991.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:12.337Z,1516402992.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:12.367Z,1516402992.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:15.434Z,1516402995.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:15.449Z,1516402995.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:15.573Z,1516402995.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:15.607Z,1516402995.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:15.935Z,1516402995.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:15.955Z,1516402995.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:16.346Z,1516402996.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:16.360Z,1516402996.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:16.732Z,1516402996.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:16.751Z,1516402996.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:17.131Z,1516402997.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:17.146Z,1516402997.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:17.525Z,1516402997.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:17.540Z,1516402997.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:17.925Z,1516402997.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:17.946Z,1516402997.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:18.334Z,1516402998.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:18.349Z,1516402998.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:18.737Z,1516402998.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:18.752Z,1516402998.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:19.137Z,1516402999.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:19.152Z,1516402999.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:19.523Z,1516402999.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:19.537Z,1516402999.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:19.924Z,1516402999.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:19.939Z,1516402999.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:20.332Z,1516403000.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:20.347Z,1516403000.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:20.723Z,1516403000.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:20.737Z,1516403000.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:21.138Z,1516403001.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:21.152Z,1516403001.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:21.538Z,1516403001.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:21.566Z,1516403001.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:21.942Z,1516403001.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:21.956Z,1516403001.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:22.333Z,1516403002.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:22.348Z,1516403002.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:22.723Z,1516403002.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:22.745Z,1516403002.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:23.115Z,1516403003.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:23.150Z,1516403003.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:23.534Z,1516403003.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:23.548Z,1516403003.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:23.926Z,1516403003.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:23.946Z,1516403003.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:24.334Z,1516403004.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:24.355Z,1516403004.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:24.742Z,1516403004.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:24.756Z,1516403004.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:25.137Z,1516403005.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:25.152Z,1516403005.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:25.515Z,1516403005.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:25.540Z,1516403005.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:25.931Z,1516403005.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:25.946Z,1516403005.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:26.326Z,1516403006.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:26.345Z,1516403006.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:26.731Z,1516403006.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:26.745Z,1516403006.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:27.134Z,1516403007.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:27.149Z,1516403007.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:27.540Z,1516403007.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:27.559Z,1516403007.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:27.934Z,1516403007.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:28.015Z,1516403008.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:28.324Z,1516403008.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:28.339Z,1516403008.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:28.727Z,1516403008.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:28.743Z,1516403008.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:29.127Z,1516403009.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:29.141Z,1516403009.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:29.528Z,1516403009.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:29.542Z,1516403009.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:29.929Z,1516403009.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:29.944Z,1516403009.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:30.342Z,1516403010.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:30.372Z,1516403010.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:30.738Z,1516403010.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:30.752Z,1516403010.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:31.142Z,1516403011.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:31.156Z,1516403011.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:31.530Z,1516403011.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:31.544Z,1516403011.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:31.931Z,1516403011.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:31.946Z,1516403011.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:32.326Z,1516403012.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:32.344Z,1516403012.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:32.730Z,1516403012.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:32.744Z,1516403012.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:33.134Z,1516403013.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:33.148Z,1516403013.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:33.534Z,1516403013.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:33.548Z,1516403013.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:33.934Z,1516403013.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:33.955Z,1516403013.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:34.331Z,1516403014.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:34.345Z,1516403014.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:34.746Z,1516403014.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:34.782Z,1516403014.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:35.145Z,1516403015.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:35.159Z,1516403015.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:35.536Z,1516403015.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:35.551Z,1516403015.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:35.926Z,1516403015.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:35.953Z,1516403015.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:36.340Z,1516403016.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:36.369Z,1516403016.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:36.743Z,1516403016.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:36.771Z,1516403016.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:37.143Z,1516403017.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:37.157Z,1516403017.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:37.540Z,1516403017.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:37.563Z,1516403017.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:37.920Z,1516403017.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:37.943Z,1516403017.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:38.330Z,1516403018.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:38.352Z,1516403018.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:38.721Z,1516403018.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:38.771Z,1516403018.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:39.154Z,1516403019.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:39.197Z,1516403019.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:39.543Z,1516403019.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:39.572Z,1516403019.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:39.940Z,1516403019.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:40.006Z,1516403020.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:40.321Z,1516403020.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:40.390Z,1516403020.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:40.721Z,1516403020.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:40.759Z,1516403020.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:41.124Z,1516403021.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:41.160Z,1516403021.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:41.530Z,1516403021.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:41.544Z,1516403021.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:41.928Z,1516403021.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:41.947Z,1516403021.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:42.339Z,1516403022.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:42.357Z,1516403022.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:42.744Z,1516403022.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:42.767Z,1516403022.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:43.144Z,1516403023.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:43.159Z,1516403023.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:43.531Z,1516403023.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:43.545Z,1516403023.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:43.933Z,1516403023.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:43.970Z,1516403023.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:44.324Z,1516403024.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:44.349Z,1516403024.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:44.715Z,1516403024.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:44.747Z,1516403024.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:45.143Z,1516403025.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:45.158Z,1516403025.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:45.542Z,1516403025.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:45.556Z,1516403025.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:45.934Z,1516403025.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:45.949Z,1516403025.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:46.323Z,1516403026.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:46.349Z,1516403026.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:46.723Z,1516403026.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:46.748Z,1516403026.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:47.115Z,1516403027.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:47.146Z,1516403027.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:47.524Z,1516403027.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:47.551Z,1516403027.551 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:47.551Z,1516403027.551 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-01-19T23:03:47.551Z,1516403027.551 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:03:47.553Z,1516403027.553 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:47.553Z,1516403027.553 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-01-19T23:03:47.553Z,1516403027.553 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:03:47.555Z,1516403027.555 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:47.555Z,1516403027.555 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2018-01-19T23:03:47.555Z,1516403027.555 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:03:47.567Z,1516403027.567 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:03:47.567Z,1516403027.567 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:03:47.567Z,1516403027.567 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:03:47.938Z,1516403027.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:47.968Z,1516403027.968 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:03:47.968Z,1516403027.968 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-01-19T23:03:47.968Z,1516403027.968 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:03:47.969Z,1516403027.969 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-01-19T23:03:47.969Z,1516403027.969 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:03:47.969Z,1516403027.969 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2018-01-19T23:03:48.326Z,1516403028.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:48.358Z,1516403028.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:03:48.358Z,1516403028.358 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:03:48.358Z,1516403028.358 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:03:48.359Z,1516403028.359 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:03:48.359Z,1516403028.359 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:03:48.359Z,1516403028.359 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:03:48.360Z,1516403028.360 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:03:48.360Z,1516403028.360 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:03:48.361Z,1516403028.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:03:48.738Z,1516403028.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:48.760Z,1516403028.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:03:48.761Z,1516403028.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:49.130Z,1516403029.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:49.162Z,1516403029.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:03:49.163Z,1516403029.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:49.515Z,1516403029.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:49.557Z,1516403029.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:03:49.558Z,1516403029.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:49.923Z,1516403029.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:49.968Z,1516403029.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:03:49.973Z,1516403029.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:50.328Z,1516403030.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:50.356Z,1516403030.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:03:50.357Z,1516403030.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:50.726Z,1516403030.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:50.751Z,1516403030.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:03:50.752Z,1516403030.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:51.130Z,1516403031.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:51.154Z,1516403031.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:03:51.155Z,1516403031.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:51.544Z,1516403031.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:51.559Z,1516403031.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:03:51.559Z,1516403031.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:51.943Z,1516403031.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:51.957Z,1516403031.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:03:51.958Z,1516403031.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:52.321Z,1516403032.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:52.335Z,1516403032.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:03:52.336Z,1516403032.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:52.732Z,1516403032.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:52.760Z,1516403032.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:03:52.761Z,1516403032.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:53.125Z,1516403033.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:53.139Z,1516403033.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:03:53.140Z,1516403033.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:53.529Z,1516403033.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:53.543Z,1516403033.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:03:53.544Z,1516403033.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:53.928Z,1516403033.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:53.947Z,1516403033.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:03:53.947Z,1516403033.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:54.343Z,1516403034.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:54.372Z,1516403034.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:03:54.373Z,1516403034.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:54.726Z,1516403034.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:54.741Z,1516403034.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:03:54.742Z,1516403034.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:55.143Z,1516403035.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:55.171Z,1516403035.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:03:55.172Z,1516403035.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:55.528Z,1516403035.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:55.543Z,1516403035.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:03:55.544Z,1516403035.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:55.921Z,1516403035.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:55.935Z,1516403035.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:03:55.936Z,1516403035.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:56.326Z,1516403036.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:56.340Z,1516403036.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:03:56.341Z,1516403036.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:56.722Z,1516403036.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:56.736Z,1516403036.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:03:56.737Z,1516403036.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:57.126Z,1516403037.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:57.140Z,1516403037.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:03:57.141Z,1516403037.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:57.538Z,1516403037.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:57.552Z,1516403037.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:03:57.565Z,1516403037.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:57.941Z,1516403037.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:57.955Z,1516403037.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:03:57.956Z,1516403037.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:58.322Z,1516403038.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:58.336Z,1516403038.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:03:58.337Z,1516403038.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:58.729Z,1516403038.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:58.743Z,1516403038.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:03:58.744Z,1516403038.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:59.127Z,1516403039.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:59.141Z,1516403039.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:03:59.142Z,1516403039.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:59.529Z,1516403039.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:59.543Z,1516403039.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:03:59.544Z,1516403039.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:03:59.929Z,1516403039.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:03:59.943Z,1516403039.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:03:59.944Z,1516403039.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:00.329Z,1516403040.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:00.343Z,1516403040.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:04:00.344Z,1516403040.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:00.730Z,1516403040.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:00.744Z,1516403040.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:04:00.745Z,1516403040.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:01.131Z,1516403041.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:01.145Z,1516403041.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:04:01.146Z,1516403041.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:01.523Z,1516403041.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:01.542Z,1516403041.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:04:01.543Z,1516403041.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:01.922Z,1516403041.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:01.936Z,1516403041.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:04:01.937Z,1516403041.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:02.327Z,1516403042.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:02.341Z,1516403042.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:04:02.342Z,1516403042.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:02.722Z,1516403042.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:02.742Z,1516403042.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:04:02.743Z,1516403042.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:03.129Z,1516403043.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:03.144Z,1516403043.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:04:03.145Z,1516403043.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:03.534Z,1516403043.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:03.555Z,1516403043.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:04:03.555Z,1516403043.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:03.934Z,1516403043.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:03.954Z,1516403043.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:04:03.955Z,1516403043.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:04.321Z,1516403044.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:04.335Z,1516403044.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:04:04.336Z,1516403044.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:04.723Z,1516403044.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:04.750Z,1516403044.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:04:04.751Z,1516403044.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:05.130Z,1516403045.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:05.144Z,1516403045.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:04:05.145Z,1516403045.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:05.532Z,1516403045.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:05.546Z,1516403045.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:04:05.547Z,1516403045.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:05.927Z,1516403045.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:05.947Z,1516403045.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:04:05.948Z,1516403045.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:06.337Z,1516403046.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:06.350Z,1516403046.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T23:04:06.351Z,1516403046.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:06.737Z,1516403046.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:06.751Z,1516403046.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T23:04:06.752Z,1516403046.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:07.137Z,1516403047.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:07.151Z,1516403047.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:04:07.152Z,1516403047.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:07.523Z,1516403047.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:07.536Z,1516403047.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T23:04:07.537Z,1516403047.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:07.923Z,1516403047.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:07.937Z,1516403047.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:08.327Z,1516403048.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:08.347Z,1516403048.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:08.727Z,1516403048.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:08.741Z,1516403048.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:09.134Z,1516403049.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:09.149Z,1516403049.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:09.538Z,1516403049.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:09.552Z,1516403049.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:09.938Z,1516403049.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:09.959Z,1516403049.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:10.332Z,1516403050.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:10.347Z,1516403050.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:10.727Z,1516403050.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:10.741Z,1516403050.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:11.137Z,1516403051.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:11.151Z,1516403051.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:11.537Z,1516403051.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:11.551Z,1516403051.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:11.950Z,1516403051.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:11.982Z,1516403051.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:12.328Z,1516403052.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:12.346Z,1516403052.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:15.530Z,1516403055.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:15.545Z,1516403055.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:15.640Z,1516403055.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:15.681Z,1516403055.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:16.010Z,1516403056.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:16.031Z,1516403056.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:16.421Z,1516403056.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:16.435Z,1516403056.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:16.806Z,1516403056.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:16.829Z,1516403056.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:17.196Z,1516403057.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:17.231Z,1516403057.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:17.596Z,1516403057.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:17.610Z,1516403057.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:17.999Z,1516403057.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:18.035Z,1516403058.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:18.410Z,1516403058.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:18.440Z,1516403058.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:18.814Z,1516403058.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:18.845Z,1516403058.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:19.210Z,1516403059.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:19.224Z,1516403059.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:19.600Z,1516403059.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:19.619Z,1516403059.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:20.000Z,1516403060.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:20.014Z,1516403060.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:20.401Z,1516403060.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:20.415Z,1516403060.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:20.800Z,1516403060.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:20.815Z,1516403060.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:21.214Z,1516403061.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:21.228Z,1516403061.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:21.606Z,1516403061.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:21.620Z,1516403061.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:22.002Z,1516403062.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:22.016Z,1516403062.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:22.400Z,1516403062.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:22.414Z,1516403062.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:22.799Z,1516403062.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:22.819Z,1516403062.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:23.200Z,1516403063.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:23.215Z,1516403063.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:23.601Z,1516403063.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:23.615Z,1516403063.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:24.000Z,1516403064.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:24.019Z,1516403064.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:24.414Z,1516403064.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:24.428Z,1516403064.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:24.810Z,1516403064.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:24.824Z,1516403064.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:25.206Z,1516403065.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:25.221Z,1516403065.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:25.603Z,1516403065.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:25.617Z,1516403065.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:26.004Z,1516403066.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:26.017Z,1516403066.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:26.402Z,1516403066.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:26.416Z,1516403066.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:26.799Z,1516403066.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:26.813Z,1516403066.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:27.205Z,1516403067.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:27.226Z,1516403067.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:27.606Z,1516403067.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:27.620Z,1516403067.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:28.004Z,1516403068.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:28.023Z,1516403068.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:28.403Z,1516403068.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:28.417Z,1516403068.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:28.803Z,1516403068.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:28.817Z,1516403068.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:29.203Z,1516403069.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:29.217Z,1516403069.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:29.596Z,1516403069.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:29.619Z,1516403069.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:29.999Z,1516403069.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:30.014Z,1516403070.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:30.404Z,1516403070.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:30.423Z,1516403070.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:30.810Z,1516403070.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:30.824Z,1516403070.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:31.206Z,1516403071.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:31.221Z,1516403071.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:31.599Z,1516403071.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:31.613Z,1516403071.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:32.003Z,1516403072.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:32.017Z,1516403072.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:32.397Z,1516403072.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:32.447Z,1516403072.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:32.802Z,1516403072.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:32.817Z,1516403072.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:33.206Z,1516403073.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:33.221Z,1516403073.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:33.610Z,1516403073.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:33.624Z,1516403073.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:34.006Z,1516403074.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:34.020Z,1516403074.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:34.401Z,1516403074.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:34.415Z,1516403074.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:34.804Z,1516403074.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:34.818Z,1516403074.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:35.203Z,1516403075.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:35.218Z,1516403075.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:35.603Z,1516403075.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:35.617Z,1516403075.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:35.996Z,1516403075.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:36.018Z,1516403076.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:36.410Z,1516403076.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:36.424Z,1516403076.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:36.811Z,1516403076.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:36.825Z,1516403076.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:37.207Z,1516403077.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:37.221Z,1516403077.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:37.598Z,1516403077.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:37.619Z,1516403077.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:38.002Z,1516403078.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:38.016Z,1516403078.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:38.404Z,1516403078.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:38.419Z,1516403078.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:38.798Z,1516403078.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:38.818Z,1516403078.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:39.211Z,1516403079.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:39.225Z,1516403079.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:39.610Z,1516403079.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:39.631Z,1516403079.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:40.009Z,1516403080.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:40.024Z,1516403080.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:40.404Z,1516403080.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:40.418Z,1516403080.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:40.799Z,1516403080.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:40.819Z,1516403080.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:41.203Z,1516403081.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:41.223Z,1516403081.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:41.605Z,1516403081.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:41.619Z,1516403081.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:42.004Z,1516403082.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:42.019Z,1516403082.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:42.409Z,1516403082.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:42.424Z,1516403082.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:42.809Z,1516403082.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:42.823Z,1516403082.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:43.209Z,1516403083.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:43.224Z,1516403083.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:43.598Z,1516403083.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:43.617Z,1516403083.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:44.001Z,1516403084.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:44.015Z,1516403084.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:44.406Z,1516403084.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:44.420Z,1516403084.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:44.804Z,1516403084.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:44.823Z,1516403084.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:45.211Z,1516403085.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:45.225Z,1516403085.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:45.611Z,1516403085.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:45.631Z,1516403085.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:46.009Z,1516403086.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:46.023Z,1516403086.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:46.396Z,1516403086.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:46.411Z,1516403086.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:46.796Z,1516403086.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:46.815Z,1516403086.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:47.203Z,1516403087.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:47.223Z,1516403087.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:47.597Z,1516403087.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:47.633Z,1516403087.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:47.992Z,1516403087.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:48.006Z,1516403088.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:48.410Z,1516403088.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:48.439Z,1516403088.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:48.821Z,1516403088.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:48.836Z,1516403088.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:49.198Z,1516403089.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:49.212Z,1516403089.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:49.599Z,1516403089.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:49.635Z,1516403089.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:49.999Z,1516403089.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:50.013Z,1516403090.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:50.400Z,1516403090.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:50.414Z,1516403090.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:50.796Z,1516403090.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:50.815Z,1516403090.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:51.198Z,1516403091.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:51.212Z,1516403091.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:51.602Z,1516403091.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:51.616Z,1516403091.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:52.014Z,1516403092.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:52.035Z,1516403092.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:52.399Z,1516403092.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:52.413Z,1516403092.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:52.795Z,1516403092.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:52.812Z,1516403092.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:53.200Z,1516403093.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:53.215Z,1516403093.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:53.597Z,1516403093.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:53.611Z,1516403093.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:53.996Z,1516403093.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:54.011Z,1516403094.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:54.410Z,1516403094.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:54.439Z,1516403094.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:54.810Z,1516403094.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:54.836Z,1516403094.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:55.198Z,1516403095.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:55.212Z,1516403095.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:55.600Z,1516403095.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:55.615Z,1516403095.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:55.996Z,1516403095.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:56.010Z,1516403096.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:56.401Z,1516403096.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:56.415Z,1516403096.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:56.800Z,1516403096.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:56.815Z,1516403096.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:57.214Z,1516403097.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:57.236Z,1516403097.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:57.610Z,1516403097.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:57.639Z,1516403097.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:58.014Z,1516403098.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:58.035Z,1516403098.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:58.399Z,1516403098.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:58.413Z,1516403098.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:58.795Z,1516403098.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:58.810Z,1516403098.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:59.206Z,1516403099.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:59.236Z,1516403099.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:04:59.614Z,1516403099.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:04:59.636Z,1516403099.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:00.010Z,1516403100.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:00.039Z,1516403100.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:00.399Z,1516403100.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:00.413Z,1516403100.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:00.799Z,1516403100.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:00.812Z,1516403100.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:01.198Z,1516403101.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:01.212Z,1516403101.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:01.614Z,1516403101.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:01.635Z,1516403101.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:02.006Z,1516403102.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:02.020Z,1516403102.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:02.397Z,1516403102.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:02.411Z,1516403102.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:02.800Z,1516403102.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:02.819Z,1516403102.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:03.210Z,1516403103.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:03.241Z,1516403103.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:03.614Z,1516403103.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:03.635Z,1516403103.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:04.006Z,1516403104.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:04.020Z,1516403104.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:04.397Z,1516403104.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:04.411Z,1516403104.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:04.795Z,1516403104.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:04.812Z,1516403104.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:05.214Z,1516403105.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:05.244Z,1516403105.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:05.614Z,1516403105.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:05.645Z,1516403105.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:06.010Z,1516403106.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:06.024Z,1516403106.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:06.401Z,1516403106.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:06.415Z,1516403106.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:06.800Z,1516403106.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:06.813Z,1516403106.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:07.202Z,1516403107.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:07.216Z,1516403107.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:07.606Z,1516403107.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:07.620Z,1516403107.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:08.014Z,1516403108.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:08.047Z,1516403108.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:08.401Z,1516403108.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:08.415Z,1516403108.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:08.800Z,1516403108.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:08.815Z,1516403108.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:09.214Z,1516403109.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:09.228Z,1516403109.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:09.614Z,1516403109.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:09.628Z,1516403109.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:10.014Z,1516403110.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:10.028Z,1516403110.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:10.404Z,1516403110.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:10.417Z,1516403110.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:10.790Z,1516403110.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:10.810Z,1516403110.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:11.204Z,1516403111.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:11.223Z,1516403111.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:11.610Z,1516403111.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:11.624Z,1516403111.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:12.006Z,1516403112.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:12.027Z,1516403112.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:12.404Z,1516403112.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:12.423Z,1516403112.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:15.488Z,1516403115.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:15.503Z,1516403115.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:15.618Z,1516403115.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:15.632Z,1516403115.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:15.975Z,1516403115.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:16.003Z,1516403116.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:16.379Z,1516403116.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:16.410Z,1516403116.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:16.763Z,1516403116.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:16.783Z,1516403116.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:17.163Z,1516403117.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:17.177Z,1516403117.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:17.562Z,1516403117.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:17.576Z,1516403117.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:17.960Z,1516403117.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:17.975Z,1516403117.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:18.374Z,1516403118.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:18.388Z,1516403118.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:18.770Z,1516403118.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:18.784Z,1516403118.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:19.165Z,1516403119.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:19.179Z,1516403119.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:19.567Z,1516403119.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:19.581Z,1516403119.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:19.959Z,1516403119.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:19.986Z,1516403119.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:20.352Z,1516403120.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:20.383Z,1516403120.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:20.766Z,1516403120.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:20.780Z,1516403120.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:21.148Z,1516403121.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:21.187Z,1516403121.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:21.578Z,1516403121.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:21.584Z,1516403121.584 [PNI_TCM](ERROR): CRC does not match. Expected:0x514 got:0x7
2018-01-19T23:05:21.620Z,1516403121.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:21.973Z,1516403121.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:21.992Z,1516403121.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:22.371Z,1516403122.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:22.385Z,1516403122.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:22.749Z,1516403122.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:22.790Z,1516403122.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:23.152Z,1516403123.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:23.181Z,1516403123.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:23.558Z,1516403123.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:23.586Z,1516403123.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:23.951Z,1516403123.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:23.978Z,1516403123.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:24.378Z,1516403124.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:24.392Z,1516403124.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:24.764Z,1516403124.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:24.791Z,1516403124.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:25.164Z,1516403125.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:25.196Z,1516403125.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:25.557Z,1516403125.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:25.584Z,1516403125.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:25.947Z,1516403125.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:25.991Z,1516403125.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:26.349Z,1516403126.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:26.375Z,1516403126.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:26.758Z,1516403126.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:26.791Z,1516403126.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:27.149Z,1516403127.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:27.194Z,1516403127.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:27.566Z,1516403127.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:27.595Z,1516403127.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:27.968Z,1516403127.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:28.002Z,1516403128.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:28.368Z,1516403128.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:28.394Z,1516403128.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:28.747Z,1516403128.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:28.762Z,1516403128.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:29.159Z,1516403129.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:29.195Z,1516403129.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:29.556Z,1516403129.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:29.592Z,1516403129.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:29.946Z,1516403129.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:29.965Z,1516403129.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:30.367Z,1516403130.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:30.392Z,1516403130.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:30.787Z,1516403130.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:30.800Z,1516403130.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:31.162Z,1516403131.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:31.191Z,1516403131.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:31.561Z,1516403131.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:31.569Z,1516403131.569 [PNI_TCM](ERROR): CRC does not match. Expected:0x61349 got:0x1857
2018-01-19T23:05:31.598Z,1516403131.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:31.958Z,1516403131.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:31.995Z,1516403131.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:32.346Z,1516403132.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:32.394Z,1516403132.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:32.760Z,1516403132.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:32.797Z,1516403132.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:33.158Z,1516403133.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:33.174Z,1516403133.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:33.560Z,1516403133.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:33.575Z,1516403133.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:33.974Z,1516403133.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:34.007Z,1516403134.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:34.372Z,1516403134.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:34.402Z,1516403134.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:34.747Z,1516403134.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:34.784Z,1516403134.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:35.166Z,1516403135.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:35.196Z,1516403135.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:35.560Z,1516403135.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:35.610Z,1516403135.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:35.949Z,1516403135.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:35.978Z,1516403135.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:36.376Z,1516403136.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:36.402Z,1516403136.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:36.775Z,1516403136.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:36.803Z,1516403136.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:37.158Z,1516403137.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:37.199Z,1516403137.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:37.560Z,1516403137.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:37.576Z,1516403137.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:37.957Z,1516403137.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:37.976Z,1516403137.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:38.355Z,1516403138.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:38.372Z,1516403138.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:38.759Z,1516403138.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:38.800Z,1516403138.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:39.159Z,1516403139.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:39.173Z,1516403139.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:39.576Z,1516403139.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:39.602Z,1516403139.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:39.971Z,1516403139.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:40.001Z,1516403140.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:40.366Z,1516403140.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:40.407Z,1516403140.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:40.755Z,1516403140.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:40.793Z,1516403140.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:41.160Z,1516403141.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:41.179Z,1516403141.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:41.557Z,1516403141.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:41.575Z,1516403141.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:41.954Z,1516403141.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:41.972Z,1516403141.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:42.364Z,1516403142.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:42.385Z,1516403142.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:42.771Z,1516403142.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:42.788Z,1516403142.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:43.165Z,1516403143.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:43.181Z,1516403143.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:43.563Z,1516403143.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:43.610Z,1516403143.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:43.961Z,1516403143.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:43.975Z,1516403143.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:44.350Z,1516403144.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:44.372Z,1516403144.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:44.758Z,1516403144.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:44.781Z,1516403144.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:45.164Z,1516403145.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:45.178Z,1516403145.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:45.566Z,1516403145.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:45.580Z,1516403145.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:45.972Z,1516403145.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:45.990Z,1516403145.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:46.370Z,1516403146.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:46.387Z,1516403146.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:46.763Z,1516403146.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:46.810Z,1516403146.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:47.164Z,1516403147.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:47.179Z,1516403147.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:47.559Z,1516403147.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:47.582Z,1516403147.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:47.964Z,1516403147.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:47.982Z,1516403147.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:48.370Z,1516403148.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:48.384Z,1516403148.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:48.771Z,1516403148.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:48.785Z,1516403148.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:49.170Z,1516403149.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:49.187Z,1516403149.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:49.563Z,1516403149.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:49.581Z,1516403149.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:49.966Z,1516403149.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:49.980Z,1516403149.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:50.352Z,1516403150.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:50.374Z,1516403150.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:50.757Z,1516403150.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:50.784Z,1516403150.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:51.166Z,1516403151.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:51.185Z,1516403151.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:51.565Z,1516403151.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:51.586Z,1516403151.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:51.972Z,1516403151.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:52.000Z,1516403152.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:52.376Z,1516403152.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:52.398Z,1516403152.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:52.764Z,1516403152.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:52.789Z,1516403152.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:53.152Z,1516403153.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:53.188Z,1516403153.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:53.566Z,1516403153.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:53.581Z,1516403153.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:53.947Z,1516403153.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:53.983Z,1516403153.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:54.375Z,1516403154.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:54.394Z,1516403154.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:54.772Z,1516403154.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:54.787Z,1516403154.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:55.158Z,1516403155.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:55.191Z,1516403155.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:55.555Z,1516403155.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:55.581Z,1516403155.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:55.952Z,1516403155.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:55.994Z,1516403155.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:56.355Z,1516403156.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:56.387Z,1516403156.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:56.752Z,1516403156.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:56.779Z,1516403156.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:57.155Z,1516403157.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:57.198Z,1516403157.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:57.566Z,1516403157.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:57.597Z,1516403157.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:57.968Z,1516403157.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:57.994Z,1516403157.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:58.362Z,1516403158.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:58.391Z,1516403158.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:58.756Z,1516403158.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:58.790Z,1516403158.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:59.152Z,1516403159.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:59.167Z,1516403159.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:59.557Z,1516403159.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:59.571Z,1516403159.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:05:59.955Z,1516403159.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:05:59.991Z,1516403159.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:00.371Z,1516403160.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:00.395Z,1516403160.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:00.775Z,1516403160.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:00.803Z,1516403160.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:01.166Z,1516403161.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:01.196Z,1516403161.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:01.556Z,1516403161.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:01.575Z,1516403161.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:01.960Z,1516403161.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:01.974Z,1516403161.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:02.355Z,1516403162.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:02.375Z,1516403162.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:02.759Z,1516403162.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:02.774Z,1516403162.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:03.156Z,1516403163.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:03.170Z,1516403163.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:03.560Z,1516403163.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:03.583Z,1516403163.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:03.974Z,1516403163.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:03.988Z,1516403163.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:04.366Z,1516403164.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:04.380Z,1516403164.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:04.750Z,1516403164.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:04.781Z,1516403164.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:05.159Z,1516403165.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:05.179Z,1516403165.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:05.556Z,1516403165.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:05.578Z,1516403165.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:05.964Z,1516403165.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:05.978Z,1516403165.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:06.369Z,1516403166.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:06.383Z,1516403166.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:06.769Z,1516403166.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:06.783Z,1516403166.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:07.166Z,1516403167.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:07.180Z,1516403167.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:07.559Z,1516403167.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:07.579Z,1516403167.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:07.957Z,1516403167.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:07.978Z,1516403167.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:08.363Z,1516403168.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:08.383Z,1516403168.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:08.758Z,1516403168.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:08.781Z,1516403168.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:09.163Z,1516403169.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:09.177Z,1516403169.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:09.573Z,1516403169.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:09.595Z,1516403169.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:09.978Z,1516403169.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:09.996Z,1516403169.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:10.375Z,1516403170.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:10.389Z,1516403170.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:10.762Z,1516403170.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:10.780Z,1516403170.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:11.151Z,1516403171.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:11.182Z,1516403171.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:11.548Z,1516403171.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:11.582Z,1516403171.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:11.963Z,1516403171.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:11.978Z,1516403171.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:11.980Z,1516403171.980 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T23:06:11.981Z,1516403171.981 [Default:CheckIn:C.Wait] Stopped
2018-01-19T23:06:11.981Z,1516403171.981 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T23:06:11.981Z,1516403171.981 [Default:CheckIn:D] Running Loop=1
2018-01-19T23:06:12.367Z,1516403172.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:12.393Z,1516403172.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:12.396Z,1516403172.396 [Default:CheckIn:D] Stopped
2018-01-19T23:06:12.396Z,1516403172.396 [Default:CheckIn:E] Running Loop=1
2018-01-19T23:06:12.778Z,1516403172.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:12.792Z,1516403172.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:12.795Z,1516403172.795 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 113.406177 min 
2018-01-19T23:06:12.796Z,1516403172.796 [Default:CheckIn:E] Stopped
2018-01-19T23:06:12.796Z,1516403172.796 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T23:06:12.796Z,1516403172.796 [Default:CheckIn] Stopped
2018-01-19T23:06:12.796Z,1516403172.796 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T23:06:12.796Z,1516403172.796 [Default:CheckIn](INFO): Running loop #12
2018-01-19T23:06:12.796Z,1516403172.796 [Default:CheckIn] Running Loop=12
2018-01-19T23:06:12.796Z,1516403172.796 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T23:06:12.796Z,1516403172.796 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T23:06:15.858Z,1516403175.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:15.880Z,1516403175.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:15.991Z,1516403175.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:16.036Z,1516403176.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:16.333Z,1516403176.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:16.378Z,1516403176.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:16.745Z,1516403176.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:16.760Z,1516403176.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:17.139Z,1516403177.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:17.153Z,1516403177.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:17.545Z,1516403177.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:17.560Z,1516403177.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:17.950Z,1516403177.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:17.964Z,1516403177.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:18.345Z,1516403178.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:18.359Z,1516403178.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:18.730Z,1516403178.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:18.752Z,1516403178.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:19.130Z,1516403179.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:19.161Z,1516403179.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:19.540Z,1516403179.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:19.554Z,1516403179.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:19.930Z,1516403179.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:19.952Z,1516403179.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:20.346Z,1516403180.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:20.361Z,1516403180.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:20.747Z,1516403180.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:20.767Z,1516403180.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:21.149Z,1516403181.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:21.163Z,1516403181.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:21.541Z,1516403181.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:21.592Z,1516403181.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:21.923Z,1516403181.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:21.954Z,1516403181.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:22.346Z,1516403182.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:22.360Z,1516403182.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:22.750Z,1516403182.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:22.764Z,1516403182.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:23.142Z,1516403183.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:23.156Z,1516403183.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:23.534Z,1516403183.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:23.553Z,1516403183.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:23.930Z,1516403183.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:23.962Z,1516403183.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:24.349Z,1516403184.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:24.371Z,1516403184.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:24.750Z,1516403184.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:24.764Z,1516403184.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:25.151Z,1516403185.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:25.171Z,1516403185.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:25.538Z,1516403185.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:25.552Z,1516403185.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:25.938Z,1516403185.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:25.952Z,1516403185.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:26.343Z,1516403186.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:26.365Z,1516403186.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:26.753Z,1516403186.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:26.768Z,1516403186.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:27.153Z,1516403187.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:27.167Z,1516403187.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:27.543Z,1516403187.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:27.557Z,1516403187.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:27.927Z,1516403187.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:27.963Z,1516403187.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:28.351Z,1516403188.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:28.371Z,1516403188.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:28.747Z,1516403188.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:28.763Z,1516403188.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:29.134Z,1516403189.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:29.171Z,1516403189.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:29.532Z,1516403189.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:29.563Z,1516403189.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:29.927Z,1516403189.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:29.965Z,1516403189.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:30.338Z,1516403190.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:30.363Z,1516403190.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:30.750Z,1516403190.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:30.764Z,1516403190.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:31.138Z,1516403191.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:31.171Z,1516403191.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:31.528Z,1516403191.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:31.555Z,1516403191.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:31.927Z,1516403191.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:31.963Z,1516403191.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:32.342Z,1516403192.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:32.369Z,1516403192.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:32.742Z,1516403192.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:32.767Z,1516403192.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:33.146Z,1516403193.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:33.171Z,1516403193.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:33.534Z,1516403193.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:33.548Z,1516403193.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:33.936Z,1516403193.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:33.951Z,1516403193.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:34.346Z,1516403194.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:34.376Z,1516403194.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:34.750Z,1516403194.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:34.782Z,1516403194.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:35.150Z,1516403195.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:35.180Z,1516403195.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:35.532Z,1516403195.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:35.556Z,1516403195.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:35.936Z,1516403195.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:35.951Z,1516403195.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:36.351Z,1516403196.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:36.380Z,1516403196.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:36.742Z,1516403196.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:36.780Z,1516403196.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:37.137Z,1516403197.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:37.155Z,1516403197.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:37.537Z,1516403197.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:37.551Z,1516403197.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:37.936Z,1516403197.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:37.951Z,1516403197.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:38.350Z,1516403198.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:38.382Z,1516403198.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:38.750Z,1516403198.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:38.781Z,1516403198.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:39.138Z,1516403199.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:39.152Z,1516403199.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:39.537Z,1516403199.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:39.551Z,1516403199.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:39.936Z,1516403199.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:39.951Z,1516403199.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:40.350Z,1516403200.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:40.379Z,1516403200.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:40.750Z,1516403200.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:40.782Z,1516403200.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:41.150Z,1516403201.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:41.179Z,1516403201.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:41.534Z,1516403201.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:41.549Z,1516403201.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:41.932Z,1516403201.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:41.946Z,1516403201.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:42.336Z,1516403202.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:42.355Z,1516403202.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:42.750Z,1516403202.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:42.781Z,1516403202.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:43.137Z,1516403203.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:43.151Z,1516403203.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:43.535Z,1516403203.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:43.549Z,1516403203.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:43.936Z,1516403203.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:43.951Z,1516403203.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:44.350Z,1516403204.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:44.381Z,1516403204.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:44.750Z,1516403204.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:44.780Z,1516403204.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:45.138Z,1516403205.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:45.152Z,1516403205.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:45.532Z,1516403205.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:45.546Z,1516403205.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:45.933Z,1516403205.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:45.955Z,1516403205.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:46.342Z,1516403206.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:46.356Z,1516403206.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:46.746Z,1516403206.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:46.760Z,1516403206.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:47.142Z,1516403207.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:47.157Z,1516403207.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:47.538Z,1516403207.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:47.552Z,1516403207.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:47.939Z,1516403207.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:47.954Z,1516403207.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:48.342Z,1516403208.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:48.357Z,1516403208.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:48.746Z,1516403208.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:48.760Z,1516403208.760 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:48.760Z,1516403208.760 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-01-19T23:06:48.760Z,1516403208.760 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:06:48.762Z,1516403208.762 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:48.762Z,1516403208.762 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-01-19T23:06:48.762Z,1516403208.762 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:06:48.764Z,1516403208.764 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:48.764Z,1516403208.764 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2018-01-19T23:06:48.764Z,1516403208.764 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:06:48.796Z,1516403208.796 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:06:48.796Z,1516403208.796 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:06:48.801Z,1516403208.801 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:06:49.142Z,1516403209.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:49.197Z,1516403209.197 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:06:49.197Z,1516403209.197 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-01-19T23:06:49.197Z,1516403209.197 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:06:49.197Z,1516403209.197 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-01-19T23:06:49.198Z,1516403209.198 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:06:49.198Z,1516403209.198 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2018-01-19T23:06:49.544Z,1516403209.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:49.558Z,1516403209.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:06:49.558Z,1516403209.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:06:49.558Z,1516403209.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:06:49.559Z,1516403209.559 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:06:49.559Z,1516403209.559 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:06:49.559Z,1516403209.559 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:06:49.560Z,1516403209.560 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:06:49.560Z,1516403209.560 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:06:49.560Z,1516403209.560 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:06:49.927Z,1516403209.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:49.978Z,1516403209.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:06:49.979Z,1516403209.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:50.347Z,1516403210.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:50.360Z,1516403210.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:06:50.361Z,1516403210.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:50.753Z,1516403210.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:50.767Z,1516403210.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:06:50.768Z,1516403210.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:51.146Z,1516403211.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:51.160Z,1516403211.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:06:51.160Z,1516403211.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:51.528Z,1516403211.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:51.563Z,1516403211.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:06:51.563Z,1516403211.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:51.938Z,1516403211.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:51.956Z,1516403211.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:06:51.958Z,1516403211.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:52.346Z,1516403212.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:52.360Z,1516403212.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:06:52.361Z,1516403212.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:52.746Z,1516403212.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:52.766Z,1516403212.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:06:52.767Z,1516403212.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:53.149Z,1516403213.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:53.163Z,1516403213.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:06:53.164Z,1516403213.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:53.539Z,1516403213.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:53.553Z,1516403213.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:06:53.554Z,1516403213.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:53.924Z,1516403213.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:53.955Z,1516403213.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:06:53.955Z,1516403213.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:54.327Z,1516403214.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:54.362Z,1516403214.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:06:54.363Z,1516403214.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:54.750Z,1516403214.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:54.764Z,1516403214.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:06:54.765Z,1516403214.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:55.146Z,1516403215.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:55.160Z,1516403215.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:06:55.161Z,1516403215.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:55.550Z,1516403215.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:55.564Z,1516403215.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:06:55.565Z,1516403215.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:55.927Z,1516403215.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:55.958Z,1516403215.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:06:55.959Z,1516403215.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:56.323Z,1516403216.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:56.355Z,1516403216.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:06:56.356Z,1516403216.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:56.728Z,1516403216.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:56.758Z,1516403216.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:06:56.759Z,1516403216.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:57.127Z,1516403217.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:57.152Z,1516403217.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:06:57.152Z,1516403217.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:57.538Z,1516403217.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:57.560Z,1516403217.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:06:57.561Z,1516403217.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:57.954Z,1516403217.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:57.968Z,1516403217.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:06:57.969Z,1516403217.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:58.346Z,1516403218.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:58.360Z,1516403218.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:06:58.360Z,1516403218.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:58.723Z,1516403218.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:58.755Z,1516403218.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:06:58.756Z,1516403218.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:59.131Z,1516403219.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:59.156Z,1516403219.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:06:59.157Z,1516403219.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:59.527Z,1516403219.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:59.552Z,1516403219.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:06:59.553Z,1516403219.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:06:59.924Z,1516403219.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:06:59.955Z,1516403219.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:06:59.956Z,1516403219.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:00.331Z,1516403220.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:00.356Z,1516403220.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:07:00.357Z,1516403220.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:00.746Z,1516403220.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:00.760Z,1516403220.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:07:00.761Z,1516403220.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:01.146Z,1516403221.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:01.160Z,1516403221.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:07:01.161Z,1516403221.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:01.550Z,1516403221.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:01.564Z,1516403221.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:07:01.565Z,1516403221.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:01.927Z,1516403221.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:01.972Z,1516403221.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:07:01.973Z,1516403221.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:02.323Z,1516403222.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:02.355Z,1516403222.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:07:02.356Z,1516403222.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:02.732Z,1516403222.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:02.757Z,1516403222.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:07:02.758Z,1516403222.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:03.131Z,1516403223.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:03.157Z,1516403223.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:07:03.158Z,1516403223.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:03.552Z,1516403223.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:03.566Z,1516403223.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:07:03.567Z,1516403223.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:03.944Z,1516403223.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:03.974Z,1516403223.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:07:03.975Z,1516403223.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:04.350Z,1516403224.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:04.364Z,1516403224.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:07:04.365Z,1516403224.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:04.725Z,1516403224.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:04.760Z,1516403224.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:07:04.761Z,1516403224.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:05.122Z,1516403225.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:05.158Z,1516403225.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:07:05.159Z,1516403225.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:05.527Z,1516403225.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:05.566Z,1516403225.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:07:05.567Z,1516403225.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:05.933Z,1516403225.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:05.964Z,1516403225.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:07:05.965Z,1516403225.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:06.321Z,1516403226.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:06.336Z,1516403226.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:07:06.337Z,1516403226.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:06.739Z,1516403226.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:06.777Z,1516403226.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:07:06.778Z,1516403226.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:07.143Z,1516403227.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:07.177Z,1516403227.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:07:07.178Z,1516403227.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:07.543Z,1516403227.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:07.575Z,1516403227.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T23:07:07.575Z,1516403227.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:07.935Z,1516403227.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:07.980Z,1516403227.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T23:07:07.982Z,1516403227.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:08.327Z,1516403228.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:08.341Z,1516403228.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:07:08.342Z,1516403228.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:08.732Z,1516403228.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:08.746Z,1516403228.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T23:07:08.747Z,1516403228.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:09.135Z,1516403229.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:09.171Z,1516403229.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:09.546Z,1516403229.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:09.581Z,1516403229.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:09.934Z,1516403229.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:09.949Z,1516403229.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:10.346Z,1516403230.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:10.379Z,1516403230.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:10.735Z,1516403230.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:10.749Z,1516403230.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:11.133Z,1516403231.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:11.147Z,1516403231.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:11.534Z,1516403231.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:11.548Z,1516403231.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:11.937Z,1516403231.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:11.951Z,1516403231.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:12.327Z,1516403232.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:12.354Z,1516403232.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:12.750Z,1516403232.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:12.780Z,1516403232.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:13.143Z,1516403233.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:13.156Z,1516403233.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:16.254Z,1516403236.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:16.276Z,1516403236.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:16.383Z,1516403236.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:16.428Z,1516403236.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:16.735Z,1516403236.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:16.749Z,1516403236.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:17.132Z,1516403237.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:17.146Z,1516403237.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:17.522Z,1516403237.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:17.544Z,1516403237.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:17.935Z,1516403237.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:17.950Z,1516403237.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:18.328Z,1516403238.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:18.342Z,1516403238.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:18.738Z,1516403238.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:18.753Z,1516403238.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:19.142Z,1516403239.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:19.156Z,1516403239.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:19.538Z,1516403239.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:19.559Z,1516403239.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:19.929Z,1516403239.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:19.943Z,1516403239.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:20.335Z,1516403240.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:20.349Z,1516403240.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:20.729Z,1516403240.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:20.742Z,1516403240.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:21.125Z,1516403241.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:21.144Z,1516403241.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:21.538Z,1516403241.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:21.553Z,1516403241.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:21.942Z,1516403241.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:21.956Z,1516403241.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:22.339Z,1516403242.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:22.353Z,1516403242.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:22.735Z,1516403242.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:22.749Z,1516403242.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:23.132Z,1516403243.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:23.146Z,1516403243.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:23.535Z,1516403243.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:23.549Z,1516403243.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:23.932Z,1516403243.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:23.946Z,1516403243.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:24.328Z,1516403244.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:24.346Z,1516403244.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:24.738Z,1516403244.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:24.753Z,1516403244.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:25.138Z,1516403245.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:25.152Z,1516403245.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:25.538Z,1516403245.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:25.558Z,1516403245.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:25.933Z,1516403245.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:25.948Z,1516403245.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:26.335Z,1516403246.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:26.349Z,1516403246.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:26.736Z,1516403246.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:26.750Z,1516403246.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:27.134Z,1516403247.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:27.148Z,1516403247.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:27.536Z,1516403247.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:27.555Z,1516403247.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:27.943Z,1516403247.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:27.957Z,1516403247.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:28.338Z,1516403248.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:28.352Z,1516403248.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:28.731Z,1516403248.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:28.745Z,1516403248.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:29.135Z,1516403249.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:29.149Z,1516403249.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:29.535Z,1516403249.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:29.549Z,1516403249.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:29.935Z,1516403249.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:29.955Z,1516403249.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:30.335Z,1516403250.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:30.349Z,1516403250.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:30.738Z,1516403250.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:30.753Z,1516403250.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:31.142Z,1516403251.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:31.156Z,1516403251.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:31.538Z,1516403251.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:31.558Z,1516403251.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:31.933Z,1516403251.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:31.947Z,1516403251.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:32.335Z,1516403252.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:32.349Z,1516403252.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:32.733Z,1516403252.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:32.747Z,1516403252.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:33.135Z,1516403253.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:33.149Z,1516403253.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:33.536Z,1516403253.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:33.555Z,1516403253.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:33.942Z,1516403253.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:33.956Z,1516403253.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:34.338Z,1516403254.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:34.352Z,1516403254.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:34.731Z,1516403254.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:34.745Z,1516403254.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:35.135Z,1516403255.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:35.149Z,1516403255.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:35.535Z,1516403255.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:35.549Z,1516403255.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:35.935Z,1516403255.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:35.955Z,1516403255.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:36.335Z,1516403256.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:36.349Z,1516403256.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:36.738Z,1516403256.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:36.753Z,1516403256.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:37.138Z,1516403257.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:37.152Z,1516403257.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:37.538Z,1516403257.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:37.558Z,1516403257.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:37.933Z,1516403257.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:37.948Z,1516403257.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:38.335Z,1516403258.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:38.349Z,1516403258.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:38.729Z,1516403258.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:38.743Z,1516403258.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:39.135Z,1516403259.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:39.150Z,1516403259.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:39.538Z,1516403259.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:39.552Z,1516403259.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:39.942Z,1516403259.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:39.956Z,1516403259.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:40.338Z,1516403260.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:40.352Z,1516403260.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:40.735Z,1516403260.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:40.755Z,1516403260.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:41.137Z,1516403261.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:41.151Z,1516403261.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:41.536Z,1516403261.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:41.550Z,1516403261.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:41.930Z,1516403261.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:41.974Z,1516403261.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:42.337Z,1516403262.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:42.350Z,1516403262.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:42.738Z,1516403262.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:42.753Z,1516403262.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:43.138Z,1516403263.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:43.159Z,1516403263.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:43.542Z,1516403263.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:43.556Z,1516403263.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:43.921Z,1516403263.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:43.948Z,1516403263.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:44.337Z,1516403264.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:44.351Z,1516403264.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:44.739Z,1516403264.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:44.753Z,1516403264.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:45.130Z,1516403265.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:45.144Z,1516403265.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:45.541Z,1516403265.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:45.563Z,1516403265.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:45.943Z,1516403265.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:45.957Z,1516403265.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:46.337Z,1516403266.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:46.352Z,1516403266.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:46.735Z,1516403266.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:46.751Z,1516403266.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:47.137Z,1516403267.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:47.152Z,1516403267.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:47.536Z,1516403267.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:47.555Z,1516403267.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:47.932Z,1516403267.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:47.983Z,1516403267.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:48.336Z,1516403268.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:48.350Z,1516403268.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:48.738Z,1516403268.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:48.753Z,1516403268.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:49.145Z,1516403269.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:49.167Z,1516403269.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:49.546Z,1516403269.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:49.559Z,1516403269.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:49.926Z,1516403269.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:49.948Z,1516403269.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:50.327Z,1516403270.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:50.349Z,1516403270.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:50.721Z,1516403270.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:50.755Z,1516403270.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:51.129Z,1516403271.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:51.147Z,1516403271.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:51.542Z,1516403271.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:51.556Z,1516403271.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:51.943Z,1516403271.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:51.962Z,1516403271.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:52.343Z,1516403272.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:52.357Z,1516403272.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:52.726Z,1516403272.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:52.749Z,1516403272.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:53.119Z,1516403273.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:53.145Z,1516403273.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:53.519Z,1516403273.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:53.544Z,1516403273.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:53.927Z,1516403273.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:53.950Z,1516403273.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:54.335Z,1516403274.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:54.349Z,1516403274.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:54.744Z,1516403274.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:54.763Z,1516403274.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:55.144Z,1516403275.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:55.163Z,1516403275.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:55.545Z,1516403275.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:55.559Z,1516403275.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:55.917Z,1516403275.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:55.950Z,1516403275.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:56.333Z,1516403276.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:56.347Z,1516403276.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:56.733Z,1516403276.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:56.754Z,1516403276.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:57.117Z,1516403277.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:57.151Z,1516403277.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:57.544Z,1516403277.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:57.563Z,1516403277.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:57.946Z,1516403277.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:57.960Z,1516403277.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:58.341Z,1516403278.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:58.356Z,1516403278.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:58.735Z,1516403278.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:58.749Z,1516403278.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:59.119Z,1516403279.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:59.145Z,1516403279.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:59.535Z,1516403279.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:59.555Z,1516403279.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:07:59.930Z,1516403279.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:07:59.949Z,1516403279.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:00.319Z,1516403280.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:00.353Z,1516403280.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:00.744Z,1516403280.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:00.763Z,1516403280.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:01.144Z,1516403281.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:01.163Z,1516403281.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:01.545Z,1516403281.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:01.559Z,1516403281.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:01.929Z,1516403281.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:01.952Z,1516403281.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:02.323Z,1516403282.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:02.359Z,1516403282.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:02.728Z,1516403282.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:02.754Z,1516403282.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:03.117Z,1516403283.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:03.131Z,1516403283.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:03.546Z,1516403283.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:03.560Z,1516403283.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:03.934Z,1516403283.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:03.967Z,1516403283.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:04.334Z,1516403284.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:04.371Z,1516403284.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:04.725Z,1516403284.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:04.739Z,1516403284.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:05.127Z,1516403285.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:05.141Z,1516403285.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:05.531Z,1516403285.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:05.567Z,1516403285.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:05.929Z,1516403285.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:05.943Z,1516403285.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:06.331Z,1516403286.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:06.345Z,1516403286.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:06.738Z,1516403286.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:06.752Z,1516403286.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:07.142Z,1516403287.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:07.156Z,1516403287.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:07.546Z,1516403287.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:07.579Z,1516403287.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:07.920Z,1516403287.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:07.942Z,1516403287.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:08.329Z,1516403288.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:08.348Z,1516403288.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:08.729Z,1516403288.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:08.746Z,1516403288.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:09.129Z,1516403289.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:09.143Z,1516403289.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:09.540Z,1516403289.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:09.563Z,1516403289.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:09.942Z,1516403289.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:09.956Z,1516403289.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:10.341Z,1516403290.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:10.355Z,1516403290.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:10.726Z,1516403290.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:10.748Z,1516403290.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:11.119Z,1516403291.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:11.153Z,1516403291.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:11.535Z,1516403291.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:11.555Z,1516403291.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:11.930Z,1516403291.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:11.949Z,1516403291.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:12.319Z,1516403292.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:12.354Z,1516403292.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:12.742Z,1516403292.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:12.756Z,1516403292.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:13.144Z,1516403293.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:13.163Z,1516403293.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:13.546Z,1516403293.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:13.566Z,1516403293.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:16.634Z,1516403296.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:16.648Z,1516403296.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:16.747Z,1516403296.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:16.788Z,1516403296.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:17.115Z,1516403297.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:17.138Z,1516403297.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:17.514Z,1516403297.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:17.537Z,1516403297.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:17.911Z,1516403297.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:17.942Z,1516403297.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:18.307Z,1516403298.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:18.340Z,1516403298.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:18.705Z,1516403298.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:18.719Z,1516403298.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:19.094Z,1516403299.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:19.116Z,1516403299.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:19.514Z,1516403299.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:19.549Z,1516403299.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:19.918Z,1516403299.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:19.932Z,1516403299.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:20.305Z,1516403300.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:20.319Z,1516403300.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:20.702Z,1516403300.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:20.718Z,1516403300.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:21.104Z,1516403301.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:21.119Z,1516403301.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:21.505Z,1516403301.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:21.520Z,1516403301.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:21.918Z,1516403301.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:21.932Z,1516403301.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:22.310Z,1516403302.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:22.327Z,1516403302.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:22.702Z,1516403302.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:22.717Z,1516403302.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:23.103Z,1516403303.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:23.118Z,1516403303.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:23.510Z,1516403303.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:23.524Z,1516403303.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:23.909Z,1516403303.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:23.923Z,1516403303.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:24.310Z,1516403304.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:24.324Z,1516403304.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:24.706Z,1516403304.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:24.720Z,1516403304.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:25.101Z,1516403305.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:25.124Z,1516403305.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:25.513Z,1516403305.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:25.527Z,1516403305.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:25.914Z,1516403305.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:25.928Z,1516403305.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:26.306Z,1516403306.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:26.336Z,1516403306.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:26.709Z,1516403306.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:26.724Z,1516403306.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:27.099Z,1516403307.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:27.114Z,1516403307.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:27.511Z,1516403307.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:27.525Z,1516403307.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:27.912Z,1516403307.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:27.927Z,1516403307.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:28.310Z,1516403308.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:28.330Z,1516403308.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:28.708Z,1516403308.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:28.723Z,1516403308.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:29.103Z,1516403309.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:29.117Z,1516403309.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:29.510Z,1516403309.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:29.524Z,1516403309.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:29.913Z,1516403309.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:29.935Z,1516403309.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:30.313Z,1516403310.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:30.327Z,1516403310.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:30.709Z,1516403310.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:30.723Z,1516403310.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:31.101Z,1516403311.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:31.115Z,1516403311.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:31.512Z,1516403311.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:31.526Z,1516403311.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:31.914Z,1516403311.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:31.928Z,1516403311.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:32.314Z,1516403312.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:32.328Z,1516403312.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:32.702Z,1516403312.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:32.721Z,1516403312.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:33.099Z,1516403313.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:33.125Z,1516403313.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:33.513Z,1516403313.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:33.527Z,1516403313.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:33.912Z,1516403313.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:33.931Z,1516403313.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:34.313Z,1516403314.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:34.327Z,1516403314.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:34.708Z,1516403314.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:34.723Z,1516403314.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:35.099Z,1516403315.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:35.126Z,1516403315.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:35.513Z,1516403315.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:35.527Z,1516403315.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:35.913Z,1516403315.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:35.928Z,1516403315.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:36.313Z,1516403316.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:36.327Z,1516403316.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:36.705Z,1516403316.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:36.719Z,1516403316.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:37.100Z,1516403317.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:37.118Z,1516403317.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:37.510Z,1516403317.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:37.529Z,1516403317.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:37.913Z,1516403317.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:37.934Z,1516403317.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:38.311Z,1516403318.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:38.325Z,1516403318.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:38.702Z,1516403318.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:38.721Z,1516403318.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:39.100Z,1516403319.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:39.122Z,1516403319.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:39.513Z,1516403319.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:39.527Z,1516403319.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:39.915Z,1516403319.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:39.937Z,1516403319.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:40.316Z,1516403320.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:40.342Z,1516403320.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:40.697Z,1516403320.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:40.734Z,1516403320.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:41.098Z,1516403321.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:41.131Z,1516403321.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:41.497Z,1516403321.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:41.544Z,1516403321.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:41.906Z,1516403321.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:41.932Z,1516403321.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:42.318Z,1516403322.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:42.332Z,1516403322.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:42.719Z,1516403322.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:42.738Z,1516403322.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:43.095Z,1516403323.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:43.130Z,1516403323.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:43.499Z,1516403323.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:43.530Z,1516403323.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:43.896Z,1516403323.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:43.934Z,1516403323.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:44.289Z,1516403324.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:44.303Z,1516403324.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:44.710Z,1516403324.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:44.736Z,1516403324.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:45.110Z,1516403325.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:45.136Z,1516403325.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:45.510Z,1516403325.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:45.535Z,1516403325.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:45.895Z,1516403325.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:45.931Z,1516403325.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:46.301Z,1516403326.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:46.315Z,1516403326.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:46.697Z,1516403326.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:46.711Z,1516403326.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:47.104Z,1516403327.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:47.118Z,1516403327.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:47.503Z,1516403327.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:47.517Z,1516403327.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:47.903Z,1516403327.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:47.917Z,1516403327.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:48.318Z,1516403328.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:48.342Z,1516403328.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:48.714Z,1516403328.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:48.747Z,1516403328.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:49.093Z,1516403329.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:49.115Z,1516403329.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:49.507Z,1516403329.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:49.527Z,1516403329.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:49.905Z,1516403329.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:49.919Z,1516403329.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:50.300Z,1516403330.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:50.318Z,1516403330.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:50.718Z,1516403330.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:50.732Z,1516403330.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:51.114Z,1516403331.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:51.128Z,1516403331.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:51.510Z,1516403331.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:51.524Z,1516403331.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:51.907Z,1516403331.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:51.922Z,1516403331.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:52.304Z,1516403332.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:52.322Z,1516403332.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:52.710Z,1516403332.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:52.724Z,1516403332.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:53.110Z,1516403333.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:53.124Z,1516403333.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:53.505Z,1516403333.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:53.519Z,1516403333.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:53.907Z,1516403333.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:53.934Z,1516403333.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:54.315Z,1516403334.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:54.335Z,1516403334.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:54.714Z,1516403334.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:54.728Z,1516403334.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:55.102Z,1516403335.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:55.123Z,1516403335.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:55.508Z,1516403335.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:55.523Z,1516403335.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:55.904Z,1516403335.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:55.928Z,1516403335.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:56.294Z,1516403336.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:56.325Z,1516403336.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:56.718Z,1516403336.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:56.732Z,1516403336.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:57.118Z,1516403337.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:57.132Z,1516403337.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:57.521Z,1516403337.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:57.536Z,1516403337.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:57.911Z,1516403337.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:57.925Z,1516403337.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:58.304Z,1516403338.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:58.318Z,1516403338.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:58.710Z,1516403338.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:58.724Z,1516403338.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:59.101Z,1516403339.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:59.138Z,1516403339.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:59.511Z,1516403339.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:59.525Z,1516403339.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:08:59.914Z,1516403339.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:08:59.928Z,1516403339.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:00.317Z,1516403340.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:00.331Z,1516403340.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:00.722Z,1516403340.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:00.742Z,1516403340.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:01.090Z,1516403341.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:01.118Z,1516403341.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:01.505Z,1516403341.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:01.523Z,1516403341.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:01.905Z,1516403341.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:01.919Z,1516403341.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:02.302Z,1516403342.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:02.323Z,1516403342.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:02.711Z,1516403342.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:02.738Z,1516403342.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:03.121Z,1516403343.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:03.136Z,1516403343.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:03.518Z,1516403343.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:03.532Z,1516403343.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:03.896Z,1516403343.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:03.926Z,1516403343.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:04.293Z,1516403344.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:04.323Z,1516403344.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:04.712Z,1516403344.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:04.726Z,1516403344.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:05.102Z,1516403345.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:05.132Z,1516403345.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:05.490Z,1516403345.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:05.527Z,1516403345.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:05.917Z,1516403345.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:05.924Z,1516403345.924 [PNI_TCM](ERROR): CRC does not match. Expected:0x28642 got:0x49481
2018-01-19T23:09:05.959Z,1516403345.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:06.320Z,1516403346.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:06.334Z,1516403346.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:06.707Z,1516403346.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:06.745Z,1516403346.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:07.089Z,1516403347.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:07.130Z,1516403347.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:07.495Z,1516403347.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:07.526Z,1516403347.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:07.894Z,1516403347.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:07.923Z,1516403347.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:08.295Z,1516403348.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:08.326Z,1516403348.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:08.715Z,1516403348.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:08.737Z,1516403348.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:09.117Z,1516403349.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:09.132Z,1516403349.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:09.519Z,1516403349.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:09.539Z,1516403349.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:09.897Z,1516403349.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:09.927Z,1516403349.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:10.291Z,1516403350.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:10.330Z,1516403350.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:10.693Z,1516403350.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:10.725Z,1516403350.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:11.098Z,1516403351.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:11.130Z,1516403351.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:11.502Z,1516403351.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:11.537Z,1516403351.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:11.902Z,1516403351.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:11.940Z,1516403351.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:12.324Z,1516403352.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:12.338Z,1516403352.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:12.351Z,1516403352.351 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T23:09:12.705Z,1516403352.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:12.739Z,1516403352.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:13.096Z,1516403353.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:13.110Z,1516403353.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:13.499Z,1516403353.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:13.546Z,1516403353.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:13.897Z,1516403353.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:13.915Z,1516403353.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:16.992Z,1516403356.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:17.011Z,1516403357.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:17.134Z,1516403357.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:17.149Z,1516403357.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:17.494Z,1516403357.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:17.532Z,1516403357.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:17.894Z,1516403357.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:17.911Z,1516403357.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:18.286Z,1516403358.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:18.319Z,1516403358.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:18.690Z,1516403358.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:18.704Z,1516403358.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:19.086Z,1516403359.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:19.100Z,1516403359.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:19.487Z,1516403359.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:19.505Z,1516403359.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:19.897Z,1516403359.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:19.911Z,1516403359.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:20.297Z,1516403360.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:20.312Z,1516403360.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:20.696Z,1516403360.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:20.718Z,1516403360.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:21.090Z,1516403361.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:21.108Z,1516403361.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:21.492Z,1516403361.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:21.507Z,1516403361.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:21.895Z,1516403361.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:21.910Z,1516403361.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:22.287Z,1516403362.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:22.301Z,1516403362.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:22.697Z,1516403362.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:22.716Z,1516403362.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:23.096Z,1516403363.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:23.115Z,1516403363.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:23.497Z,1516403363.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:23.511Z,1516403363.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:23.886Z,1516403363.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:23.905Z,1516403363.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:24.282Z,1516403364.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:24.306Z,1516403364.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:24.682Z,1516403364.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:24.713Z,1516403364.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:25.077Z,1516403365.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:25.104Z,1516403365.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:25.483Z,1516403365.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:25.508Z,1516403365.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:25.898Z,1516403365.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:25.917Z,1516403365.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:26.298Z,1516403366.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:26.312Z,1516403366.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:26.694Z,1516403366.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:26.723Z,1516403366.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:27.079Z,1516403367.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:27.106Z,1516403367.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:27.475Z,1516403367.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:27.506Z,1516403367.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:27.884Z,1516403367.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:27.909Z,1516403367.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:28.279Z,1516403368.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:28.311Z,1516403368.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:28.686Z,1516403368.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:28.712Z,1516403368.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:29.107Z,1516403369.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:29.125Z,1516403369.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:29.506Z,1516403369.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:29.520Z,1516403369.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:29.879Z,1516403369.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:29.894Z,1516403369.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:30.287Z,1516403370.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:30.313Z,1516403370.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:30.688Z,1516403370.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:30.727Z,1516403370.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:31.088Z,1516403371.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:31.103Z,1516403371.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:31.485Z,1516403371.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:31.509Z,1516403371.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:31.902Z,1516403371.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:31.936Z,1516403371.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:32.302Z,1516403372.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:32.333Z,1516403372.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:32.703Z,1516403372.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:32.735Z,1516403372.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:33.089Z,1516403373.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:33.104Z,1516403373.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:33.488Z,1516403373.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:33.503Z,1516403373.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:33.890Z,1516403373.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:33.906Z,1516403373.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:34.282Z,1516403374.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:34.302Z,1516403374.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:34.690Z,1516403374.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:34.704Z,1516403374.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:35.095Z,1516403375.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:35.109Z,1516403375.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:35.495Z,1516403375.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:35.510Z,1516403375.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:35.884Z,1516403375.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:35.899Z,1516403375.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:36.287Z,1516403376.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:36.307Z,1516403376.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:36.690Z,1516403376.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:36.705Z,1516403376.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:37.084Z,1516403377.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:37.099Z,1516403377.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:37.487Z,1516403377.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:37.501Z,1516403377.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:37.893Z,1516403377.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:37.907Z,1516403377.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:38.293Z,1516403378.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:38.308Z,1516403378.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:38.694Z,1516403378.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:38.709Z,1516403378.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:39.083Z,1516403379.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:39.097Z,1516403379.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:39.488Z,1516403379.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:39.503Z,1516403379.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:39.891Z,1516403379.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:39.911Z,1516403379.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:40.288Z,1516403380.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:40.302Z,1516403380.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:40.699Z,1516403380.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:40.714Z,1516403380.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:41.101Z,1516403381.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:41.122Z,1516403381.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:41.502Z,1516403381.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:41.516Z,1516403381.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:41.875Z,1516403381.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:41.911Z,1516403381.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:42.284Z,1516403382.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:42.309Z,1516403382.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:42.675Z,1516403382.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:42.708Z,1516403382.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:43.084Z,1516403383.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:43.111Z,1516403383.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:43.479Z,1516403383.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:43.511Z,1516403383.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:43.895Z,1516403383.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:43.911Z,1516403383.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:44.298Z,1516403384.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:44.314Z,1516403384.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:44.694Z,1516403384.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:44.716Z,1516403384.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:45.075Z,1516403385.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:45.111Z,1516403385.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:45.483Z,1516403385.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:45.509Z,1516403385.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:45.880Z,1516403385.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:45.905Z,1516403385.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:46.279Z,1516403386.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:46.322Z,1516403386.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:46.694Z,1516403386.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:46.720Z,1516403386.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:47.094Z,1516403387.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:47.119Z,1516403387.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:47.485Z,1516403387.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:47.519Z,1516403387.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:47.883Z,1516403387.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:47.897Z,1516403387.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:48.287Z,1516403388.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:48.327Z,1516403388.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:48.687Z,1516403388.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:48.701Z,1516403388.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:49.081Z,1516403389.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:49.095Z,1516403389.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:49.480Z,1516403389.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:49.502Z,1516403389.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:49.898Z,1516403389.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:49.928Z,1516403389.928 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:49.928Z,1516403389.928 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-01-19T23:09:49.928Z,1516403389.928 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:09:49.930Z,1516403389.930 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:49.930Z,1516403389.930 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-01-19T23:09:49.930Z,1516403389.930 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:09:49.931Z,1516403389.931 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:49.932Z,1516403389.932 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2018-01-19T23:09:49.932Z,1516403389.932 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:09:49.944Z,1516403389.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:09:49.944Z,1516403389.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:09:49.944Z,1516403389.944 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:09:50.294Z,1516403390.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:50.335Z,1516403390.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:09:50.335Z,1516403390.335 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-01-19T23:09:50.335Z,1516403390.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:09:50.335Z,1516403390.335 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-01-19T23:09:50.336Z,1516403390.336 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:09:50.336Z,1516403390.336 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2018-01-19T23:09:50.691Z,1516403390.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:50.710Z,1516403390.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:09:50.710Z,1516403390.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:09:50.710Z,1516403390.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:09:50.711Z,1516403390.711 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:09:50.711Z,1516403390.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:09:50.711Z,1516403390.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:09:50.712Z,1516403390.712 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:09:50.712Z,1516403390.712 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:09:50.712Z,1516403390.712 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:09:51.083Z,1516403391.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:51.102Z,1516403391.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:09:51.103Z,1516403391.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:51.492Z,1516403391.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:51.506Z,1516403391.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:09:51.507Z,1516403391.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:51.883Z,1516403391.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:51.904Z,1516403391.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:09:51.905Z,1516403391.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:52.279Z,1516403392.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:52.312Z,1516403392.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:09:52.313Z,1516403392.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:52.702Z,1516403392.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:52.716Z,1516403392.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:09:52.717Z,1516403392.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:53.102Z,1516403393.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:53.115Z,1516403393.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:09:53.116Z,1516403393.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:53.494Z,1516403393.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:53.508Z,1516403393.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:09:53.509Z,1516403393.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:53.883Z,1516403393.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:53.909Z,1516403393.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:09:53.910Z,1516403393.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:54.279Z,1516403394.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:54.304Z,1516403394.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:09:54.304Z,1516403394.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:54.675Z,1516403394.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:54.710Z,1516403394.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:09:54.711Z,1516403394.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:55.080Z,1516403395.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:55.111Z,1516403395.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:09:55.111Z,1516403395.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:55.479Z,1516403395.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:55.504Z,1516403395.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:09:55.505Z,1516403395.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:55.890Z,1516403395.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:55.911Z,1516403395.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:09:55.912Z,1516403395.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:56.306Z,1516403396.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:56.320Z,1516403396.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:09:56.321Z,1516403396.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:56.702Z,1516403396.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:56.716Z,1516403396.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:09:56.717Z,1516403396.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:57.075Z,1516403397.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:57.106Z,1516403397.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:09:57.107Z,1516403397.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:57.483Z,1516403397.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:57.509Z,1516403397.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:09:57.510Z,1516403397.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:57.880Z,1516403397.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:57.905Z,1516403397.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:09:57.906Z,1516403397.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:58.279Z,1516403398.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:58.321Z,1516403398.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:09:58.322Z,1516403398.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:58.694Z,1516403398.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:58.727Z,1516403398.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:09:58.727Z,1516403398.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:59.094Z,1516403399.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:59.126Z,1516403399.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:09:59.127Z,1516403399.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:59.485Z,1516403399.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:59.518Z,1516403399.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:09:59.519Z,1516403399.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:09:59.883Z,1516403399.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:09:59.918Z,1516403399.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:09:59.919Z,1516403399.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:00.279Z,1516403400.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:00.320Z,1516403400.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:10:00.321Z,1516403400.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:00.675Z,1516403400.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:00.694Z,1516403400.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:10:00.695Z,1516403400.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:01.084Z,1516403401.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:01.118Z,1516403401.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:10:01.119Z,1516403401.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:01.483Z,1516403401.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:01.518Z,1516403401.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:10:01.519Z,1516403401.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:01.898Z,1516403401.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:01.921Z,1516403401.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:10:01.922Z,1516403401.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:02.302Z,1516403402.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:02.327Z,1516403402.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:10:02.327Z,1516403402.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:02.698Z,1516403402.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:02.719Z,1516403402.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:10:02.720Z,1516403402.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:03.087Z,1516403403.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:03.100Z,1516403403.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:10:03.101Z,1516403403.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:03.487Z,1516403403.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:03.501Z,1516403403.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:10:03.502Z,1516403403.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:03.889Z,1516403403.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:03.903Z,1516403403.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:10:03.903Z,1516403403.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:04.283Z,1516403404.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:04.308Z,1516403404.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:10:04.309Z,1516403404.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:04.698Z,1516403404.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:04.712Z,1516403404.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:10:04.729Z,1516403404.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:05.094Z,1516403405.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:05.108Z,1516403405.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:10:05.108Z,1516403405.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:05.501Z,1516403405.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:05.514Z,1516403405.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:10:05.515Z,1516403405.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:05.889Z,1516403405.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:05.910Z,1516403405.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:10:05.911Z,1516403405.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:06.291Z,1516403406.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:06.305Z,1516403406.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:10:06.306Z,1516403406.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:06.683Z,1516403406.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:06.697Z,1516403406.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:10:06.698Z,1516403406.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:07.091Z,1516403407.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:07.105Z,1516403407.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:10:07.106Z,1516403407.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:07.491Z,1516403407.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:07.505Z,1516403407.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:10:07.506Z,1516403407.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:07.893Z,1516403407.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:07.907Z,1516403407.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:10:07.907Z,1516403407.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:08.298Z,1516403408.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:08.312Z,1516403408.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:10:08.313Z,1516403408.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:08.694Z,1516403408.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:08.708Z,1516403408.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T23:10:08.709Z,1516403408.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:09.088Z,1516403409.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:09.101Z,1516403409.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T23:10:09.102Z,1516403409.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:09.492Z,1516403409.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:09.510Z,1516403409.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:10:09.511Z,1516403409.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:09.892Z,1516403409.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:09.910Z,1516403409.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T23:10:09.911Z,1516403409.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:10.285Z,1516403410.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:10.306Z,1516403410.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:10.666Z,1516403410.666 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T23:10:10.666Z,1516403410.666 [NAL9602] Data Fault, FailCount= 1
2018-01-19T23:10:10.666Z,1516403410.666 [NAL9602](ERROR): Data Fault
2018-01-19T23:10:10.705Z,1516403410.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:10.719Z,1516403410.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:10.744Z,1516403410.744 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T23:10:11.066Z,1516403411.066 [NAL9602](INFO): Powering down
2018-01-19T23:10:11.098Z,1516403411.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:11.116Z,1516403411.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:11.475Z,1516403411.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:11.502Z,1516403411.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:11.885Z,1516403411.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:11.911Z,1516403411.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:11.924Z,1516403411.924 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T23:10:11.924Z,1516403411.924 [NAL9602] No Fault, FailCount= 1
2018-01-19T23:10:12.291Z,1516403412.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:12.306Z,1516403412.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:12.689Z,1516403412.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:12.704Z,1516403412.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:13.085Z,1516403413.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:13.103Z,1516403413.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:13.482Z,1516403413.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:13.506Z,1516403413.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:13.876Z,1516403413.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:13.911Z,1516403413.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:14.286Z,1516403414.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:14.305Z,1516403414.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:17.402Z,1516403417.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:17.416Z,1516403417.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:17.513Z,1516403417.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:17.554Z,1516403417.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:17.895Z,1516403417.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:17.909Z,1516403417.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:18.295Z,1516403418.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:18.309Z,1516403418.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:18.691Z,1516403418.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:18.705Z,1516403418.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:19.098Z,1516403419.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:19.112Z,1516403419.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:19.491Z,1516403419.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:19.505Z,1516403419.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:19.892Z,1516403419.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:19.907Z,1516403419.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:20.295Z,1516403420.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:20.309Z,1516403420.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:20.698Z,1516403420.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:20.712Z,1516403420.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:21.093Z,1516403421.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:21.108Z,1516403421.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:21.496Z,1516403421.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:21.510Z,1516403421.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:21.898Z,1516403421.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:21.912Z,1516403421.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:22.291Z,1516403422.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:22.309Z,1516403422.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:22.695Z,1516403422.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:22.709Z,1516403422.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:23.090Z,1516403423.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:23.105Z,1516403423.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:23.499Z,1516403423.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:23.514Z,1516403423.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:23.894Z,1516403423.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:23.909Z,1516403423.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:24.290Z,1516403424.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:24.305Z,1516403424.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:24.690Z,1516403424.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:24.705Z,1516403424.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:25.094Z,1516403425.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:25.108Z,1516403425.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:25.499Z,1516403425.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:25.512Z,1516403425.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:25.892Z,1516403425.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:25.906Z,1516403425.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:26.294Z,1516403426.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:26.308Z,1516403426.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:26.699Z,1516403426.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:26.712Z,1516403426.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:27.080Z,1516403427.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:27.114Z,1516403427.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:27.498Z,1516403427.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:27.512Z,1516403427.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:27.894Z,1516403427.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:27.914Z,1516403427.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:28.290Z,1516403428.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:28.305Z,1516403428.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:28.694Z,1516403428.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:28.708Z,1516403428.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:29.091Z,1516403429.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:29.105Z,1516403429.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:29.499Z,1516403429.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:29.513Z,1516403429.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:29.894Z,1516403429.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:29.908Z,1516403429.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:30.290Z,1516403430.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:30.304Z,1516403430.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:30.699Z,1516403430.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:30.713Z,1516403430.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:31.095Z,1516403431.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:31.108Z,1516403431.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:31.499Z,1516403431.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:31.512Z,1516403431.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:31.880Z,1516403431.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:31.907Z,1516403431.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:32.298Z,1516403432.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:32.312Z,1516403432.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:32.698Z,1516403432.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:32.712Z,1516403432.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:33.084Z,1516403433.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:33.114Z,1516403433.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:33.487Z,1516403433.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:33.519Z,1516403433.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:33.886Z,1516403433.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:33.918Z,1516403433.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:34.284Z,1516403434.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:34.315Z,1516403434.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:34.690Z,1516403434.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:34.715Z,1516403434.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:35.091Z,1516403435.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:35.122Z,1516403435.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:35.491Z,1516403435.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:35.516Z,1516403435.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:35.887Z,1516403435.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:35.911Z,1516403435.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:36.291Z,1516403436.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:36.317Z,1516403436.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:36.691Z,1516403436.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:36.716Z,1516403436.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:37.090Z,1516403437.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:37.115Z,1516403437.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:37.491Z,1516403437.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:37.517Z,1516403437.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:37.880Z,1516403437.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:37.903Z,1516403437.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:38.291Z,1516403438.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:38.315Z,1516403438.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:38.691Z,1516403438.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:38.717Z,1516403438.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:39.084Z,1516403439.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:39.107Z,1516403439.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:39.490Z,1516403439.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:39.523Z,1516403439.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:39.891Z,1516403439.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:39.923Z,1516403439.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:40.287Z,1516403440.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:40.301Z,1516403440.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:40.687Z,1516403440.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:40.706Z,1516403440.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:41.074Z,1516403441.074 [NAL9602](INFO): Powering up NAL9602
2018-01-19T23:10:41.092Z,1516403441.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:41.107Z,1516403441.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:41.495Z,1516403441.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:41.509Z,1516403441.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:41.894Z,1516403441.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:41.908Z,1516403441.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:42.292Z,1516403442.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:42.311Z,1516403442.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:42.692Z,1516403442.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:42.706Z,1516403442.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:43.093Z,1516403443.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:43.107Z,1516403443.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:43.496Z,1516403443.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:43.511Z,1516403443.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:43.892Z,1516403443.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:43.906Z,1516403443.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:44.295Z,1516403444.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:44.309Z,1516403444.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:44.692Z,1516403444.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:44.711Z,1516403444.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:45.096Z,1516403445.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:45.110Z,1516403445.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:45.492Z,1516403445.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:45.506Z,1516403445.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:45.896Z,1516403445.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:45.915Z,1516403445.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:46.296Z,1516403446.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:46.310Z,1516403446.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:46.695Z,1516403446.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:46.709Z,1516403446.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:47.098Z,1516403447.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:47.112Z,1516403447.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:47.497Z,1516403447.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:47.511Z,1516403447.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:47.897Z,1516403447.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:47.911Z,1516403447.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:48.297Z,1516403448.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:48.311Z,1516403448.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:48.696Z,1516403448.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:48.711Z,1516403448.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:49.097Z,1516403449.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:49.111Z,1516403449.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:49.494Z,1516403449.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:49.515Z,1516403449.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:49.897Z,1516403449.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:49.911Z,1516403449.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:50.297Z,1516403450.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:50.311Z,1516403450.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:50.697Z,1516403450.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:50.712Z,1516403450.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:51.092Z,1516403451.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:51.106Z,1516403451.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:51.493Z,1516403451.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:51.514Z,1516403451.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:51.896Z,1516403451.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:51.914Z,1516403451.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:52.269Z,1516403452.269 [NAL9602](INFO): NAL9602 initialized
2018-01-19T23:10:52.300Z,1516403452.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:52.314Z,1516403452.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:52.702Z,1516403452.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:52.716Z,1516403452.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:53.101Z,1516403453.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:53.123Z,1516403453.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:53.506Z,1516403453.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:53.521Z,1516403453.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:53.902Z,1516403453.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:53.919Z,1516403453.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:54.285Z,1516403454.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:54.308Z,1516403454.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:54.696Z,1516403454.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:54.711Z,1516403454.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:55.100Z,1516403455.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:55.114Z,1516403455.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:55.502Z,1516403455.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:55.518Z,1516403455.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:55.901Z,1516403455.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:55.915Z,1516403455.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:56.302Z,1516403456.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:56.323Z,1516403456.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:56.698Z,1516403456.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:56.712Z,1516403456.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:57.099Z,1516403457.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:57.113Z,1516403457.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:57.502Z,1516403457.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:57.516Z,1516403457.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:57.903Z,1516403457.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:57.931Z,1516403457.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:58.310Z,1516403458.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:58.324Z,1516403458.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:58.701Z,1516403458.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:58.715Z,1516403458.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:59.093Z,1516403459.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:59.116Z,1516403459.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:59.510Z,1516403459.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:59.525Z,1516403459.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:10:59.914Z,1516403459.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:10:59.935Z,1516403459.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:00.302Z,1516403460.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:00.317Z,1516403460.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:00.688Z,1516403460.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:00.713Z,1516403460.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:01.087Z,1516403461.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:01.112Z,1516403461.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:01.502Z,1516403461.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:01.516Z,1516403461.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:01.905Z,1516403461.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:01.920Z,1516403461.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:02.306Z,1516403462.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:02.320Z,1516403462.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:02.700Z,1516403462.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:02.714Z,1516403462.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:03.099Z,1516403463.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:03.124Z,1516403463.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:03.510Z,1516403463.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:03.524Z,1516403463.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:03.900Z,1516403463.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:03.926Z,1516403463.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:04.310Z,1516403464.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:04.324Z,1516403464.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:04.688Z,1516403464.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:04.713Z,1516403464.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:05.085Z,1516403465.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:05.107Z,1516403465.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:05.494Z,1516403465.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:05.519Z,1516403465.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:05.910Z,1516403465.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:05.924Z,1516403465.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:06.306Z,1516403466.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:06.320Z,1516403466.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:06.692Z,1516403466.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:06.717Z,1516403466.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:07.087Z,1516403467.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:07.119Z,1516403467.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:07.510Z,1516403467.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:07.524Z,1516403467.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:07.910Z,1516403467.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:07.924Z,1516403467.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:08.306Z,1516403468.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:08.331Z,1516403468.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:08.692Z,1516403468.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:08.718Z,1516403468.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:09.087Z,1516403469.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:09.118Z,1516403469.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:09.511Z,1516403469.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:09.525Z,1516403469.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:09.898Z,1516403469.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:09.935Z,1516403469.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:10.312Z,1516403470.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:10.326Z,1516403470.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:10.704Z,1516403470.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:10.727Z,1516403470.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:11.083Z,1516403471.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:11.109Z,1516403471.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:11.510Z,1516403471.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:11.531Z,1516403471.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:11.914Z,1516403471.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:11.943Z,1516403471.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:12.294Z,1516403472.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:12.308Z,1516403472.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:12.692Z,1516403472.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:12.711Z,1516403472.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:13.096Z,1516403473.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:13.110Z,1516403473.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:13.114Z,1516403473.114 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T23:06:12.8Z
2018-01-19T23:11:13.114Z,1516403473.114 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T23:11:13.114Z,1516403473.114 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T23:11:13.496Z,1516403473.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:13.511Z,1516403473.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:13.951Z,1516403473.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:13.965Z,1516403473.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:14.307Z,1516403474.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:14.343Z,1516403474.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:17.462Z,1516403477.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:17.495Z,1516403477.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:17.579Z,1516403477.579 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0048.lzma
2018-01-19T23:11:17.600Z,1516403477.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:17.650Z,1516403477.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:17.950Z,1516403477.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:17.964Z,1516403477.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:18.323Z,1516403478.323 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0048.lzma.bak
2018-01-19T23:11:18.323Z,1516403478.323 [DataOverHttps](INFO): SBD MOMSN=7724783
2018-01-19T23:11:18.359Z,1516403478.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:18.372Z,1516403478.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:18.839Z,1516403478.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:18.854Z,1516403478.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:19.151Z,1516403479.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:19.165Z,1516403479.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:22.251Z,1516403482.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:22.271Z,1516403482.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:22.379Z,1516403482.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:22.419Z,1516403482.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:22.758Z,1516403482.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:22.772Z,1516403482.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:23.157Z,1516403483.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:23.170Z,1516403483.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:23.555Z,1516403483.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:23.569Z,1516403483.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:23.954Z,1516403483.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:23.968Z,1516403483.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:27.042Z,1516403487.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:27.057Z,1516403487.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:27.142Z,1516403487.142 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180119T210901/Express0049.lzma
2018-01-19T23:11:27.174Z,1516403487.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:27.207Z,1516403487.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:27.522Z,1516403487.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:27.552Z,1516403487.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:27.883Z,1516403487.883 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0049.lzma.bak
2018-01-19T23:11:27.883Z,1516403487.883 [DataOverHttps](INFO): SBD MOMSN=7724787
2018-01-19T23:11:27.934Z,1516403487.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:27.957Z,1516403487.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:28.410Z,1516403488.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:28.431Z,1516403488.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:28.434Z,1516403488.434 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T23:11:28.434Z,1516403488.434 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T23:11:28.434Z,1516403488.434 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T23:11:28.710Z,1516403488.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:28.732Z,1516403488.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:31.803Z,1516403491.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:31.817Z,1516403491.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:31.916Z,1516403491.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:31.962Z,1516403491.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:32.283Z,1516403492.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:32.312Z,1516403492.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:32.687Z,1516403492.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:32.713Z,1516403492.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:33.070Z,1516403493.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:33.084Z,1516403493.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:33.470Z,1516403493.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:33.484Z,1516403493.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:33.869Z,1516403493.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:33.882Z,1516403493.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:34.266Z,1516403494.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:34.288Z,1516403494.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:34.675Z,1516403494.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:34.690Z,1516403494.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:35.075Z,1516403495.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:35.088Z,1516403495.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:35.474Z,1516403495.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:35.495Z,1516403495.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:35.872Z,1516403495.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:35.887Z,1516403495.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:36.268Z,1516403496.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:36.282Z,1516403496.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:36.667Z,1516403496.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:36.681Z,1516403496.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:37.070Z,1516403497.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:37.085Z,1516403497.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:37.468Z,1516403497.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:37.486Z,1516403497.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:37.872Z,1516403497.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:37.891Z,1516403497.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:38.286Z,1516403498.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:38.300Z,1516403498.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:38.678Z,1516403498.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:38.698Z,1516403498.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:39.069Z,1516403499.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:39.083Z,1516403499.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:39.470Z,1516403499.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:39.484Z,1516403499.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:39.869Z,1516403499.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:39.882Z,1516403499.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:40.275Z,1516403500.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:40.295Z,1516403500.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:40.676Z,1516403500.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:40.695Z,1516403500.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:41.081Z,1516403501.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:41.095Z,1516403501.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:41.476Z,1516403501.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:41.491Z,1516403501.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:41.875Z,1516403501.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:41.895Z,1516403501.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:42.276Z,1516403502.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:42.290Z,1516403502.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:42.676Z,1516403502.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:42.690Z,1516403502.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:43.065Z,1516403503.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:43.115Z,1516403503.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:43.466Z,1516403503.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:43.480Z,1516403503.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:43.870Z,1516403503.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:43.885Z,1516403503.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:44.282Z,1516403504.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:44.296Z,1516403504.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:44.678Z,1516403504.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:44.692Z,1516403504.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:45.061Z,1516403505.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:45.075Z,1516403505.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:45.465Z,1516403505.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:45.479Z,1516403505.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:45.862Z,1516403505.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:45.875Z,1516403505.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:46.267Z,1516403506.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:46.287Z,1516403506.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:46.675Z,1516403506.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:46.699Z,1516403506.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:47.078Z,1516403507.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:47.098Z,1516403507.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:47.470Z,1516403507.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:47.501Z,1516403507.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:47.863Z,1516403507.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:47.891Z,1516403507.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:48.259Z,1516403508.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:48.302Z,1516403508.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:48.661Z,1516403508.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:48.675Z,1516403508.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:49.068Z,1516403509.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:49.098Z,1516403509.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:49.467Z,1516403509.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:49.481Z,1516403509.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:49.870Z,1516403509.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:49.884Z,1516403509.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:50.282Z,1516403510.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:50.303Z,1516403510.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:50.682Z,1516403510.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:50.710Z,1516403510.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:51.059Z,1516403511.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:51.085Z,1516403511.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:51.472Z,1516403511.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:51.491Z,1516403511.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:51.872Z,1516403511.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:51.885Z,1516403511.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:52.265Z,1516403512.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:52.287Z,1516403512.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:52.686Z,1516403512.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:52.715Z,1516403512.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:53.074Z,1516403513.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:53.094Z,1516403513.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:53.470Z,1516403513.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:53.485Z,1516403513.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:53.872Z,1516403513.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:53.891Z,1516403513.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:54.268Z,1516403514.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:54.282Z,1516403514.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:54.672Z,1516403514.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:54.691Z,1516403514.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:55.069Z,1516403515.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:55.084Z,1516403515.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:55.472Z,1516403515.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:55.486Z,1516403515.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:55.874Z,1516403515.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:55.889Z,1516403515.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:56.282Z,1516403516.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:56.296Z,1516403516.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:56.686Z,1516403516.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:56.722Z,1516403516.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:57.065Z,1516403517.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:57.079Z,1516403517.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:57.469Z,1516403517.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:57.495Z,1516403517.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:57.873Z,1516403517.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:57.887Z,1516403517.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:58.272Z,1516403518.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:58.287Z,1516403518.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:58.674Z,1516403518.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:58.688Z,1516403518.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:59.086Z,1516403519.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:59.100Z,1516403519.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:59.471Z,1516403519.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:59.491Z,1516403519.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:11:59.872Z,1516403519.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:11:59.887Z,1516403519.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:00.272Z,1516403520.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:00.286Z,1516403520.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:00.672Z,1516403520.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:00.687Z,1516403520.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:01.070Z,1516403521.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:01.085Z,1516403521.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:01.468Z,1516403521.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:01.482Z,1516403521.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:01.874Z,1516403521.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:01.889Z,1516403521.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:02.294Z,1516403522.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:02.316Z,1516403522.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:02.673Z,1516403522.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:02.687Z,1516403522.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:03.069Z,1516403523.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:03.084Z,1516403523.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:03.473Z,1516403523.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:03.487Z,1516403523.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:03.873Z,1516403523.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:03.887Z,1516403523.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:04.274Z,1516403524.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:04.295Z,1516403524.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:04.674Z,1516403524.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:04.689Z,1516403524.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:05.086Z,1516403525.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:05.100Z,1516403525.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:05.474Z,1516403525.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:05.495Z,1516403525.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:05.873Z,1516403525.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:05.887Z,1516403525.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:06.269Z,1516403526.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:06.283Z,1516403526.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:06.671Z,1516403526.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:06.689Z,1516403526.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:07.075Z,1516403527.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:07.089Z,1516403527.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:07.475Z,1516403527.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:07.488Z,1516403527.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:07.875Z,1516403527.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:07.899Z,1516403527.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:08.286Z,1516403528.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:08.300Z,1516403528.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:08.679Z,1516403528.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:08.698Z,1516403528.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:09.061Z,1516403529.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:09.091Z,1516403529.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:09.477Z,1516403529.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:09.491Z,1516403529.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:09.878Z,1516403529.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:09.892Z,1516403529.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:10.269Z,1516403530.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:10.285Z,1516403530.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:10.683Z,1516403530.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:10.698Z,1516403530.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:11.086Z,1516403531.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:11.101Z,1516403531.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:11.481Z,1516403531.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:11.497Z,1516403531.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:11.881Z,1516403531.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:11.896Z,1516403531.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:12.273Z,1516403532.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:12.287Z,1516403532.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:12.659Z,1516403532.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:12.691Z,1516403532.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:13.071Z,1516403533.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:13.090Z,1516403533.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:13.472Z,1516403533.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:13.494Z,1516403533.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:13.886Z,1516403533.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:13.900Z,1516403533.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:14.285Z,1516403534.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:14.307Z,1516403534.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:14.686Z,1516403534.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:14.700Z,1516403534.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:15.081Z,1516403535.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:15.112Z,1516403535.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:15.475Z,1516403535.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:15.496Z,1516403535.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:15.860Z,1516403535.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:15.886Z,1516403535.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:16.269Z,1516403536.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:16.291Z,1516403536.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:16.686Z,1516403536.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:16.700Z,1516403536.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:17.087Z,1516403537.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:17.101Z,1516403537.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:17.479Z,1516403537.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:17.499Z,1516403537.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:17.874Z,1516403537.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:17.892Z,1516403537.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:18.259Z,1516403538.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:18.294Z,1516403538.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:18.675Z,1516403538.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:18.695Z,1516403538.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:19.064Z,1516403539.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:19.095Z,1516403539.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:19.459Z,1516403539.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:19.494Z,1516403539.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:19.882Z,1516403539.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:19.896Z,1516403539.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:20.286Z,1516403540.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:20.300Z,1516403540.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:20.678Z,1516403540.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:20.692Z,1516403540.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:21.059Z,1516403541.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:21.084Z,1516403541.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:21.463Z,1516403541.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:21.494Z,1516403541.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:21.864Z,1516403541.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:21.890Z,1516403541.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:22.261Z,1516403542.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:22.295Z,1516403542.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:22.686Z,1516403542.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:22.700Z,1516403542.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:23.082Z,1516403543.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:23.179Z,1516403543.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:23.480Z,1516403543.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:23.500Z,1516403543.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:23.868Z,1516403543.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:23.893Z,1516403543.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:24.259Z,1516403544.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:24.292Z,1516403544.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:24.687Z,1516403544.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:24.701Z,1516403544.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:25.086Z,1516403545.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:25.100Z,1516403545.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:25.486Z,1516403545.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:25.503Z,1516403545.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:25.868Z,1516403545.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:25.893Z,1516403545.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:26.263Z,1516403546.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:26.288Z,1516403546.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:26.681Z,1516403546.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:26.703Z,1516403546.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:27.078Z,1516403547.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:27.093Z,1516403547.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:27.482Z,1516403547.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:27.496Z,1516403547.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:27.864Z,1516403547.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:27.902Z,1516403547.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:28.267Z,1516403548.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:28.292Z,1516403548.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:28.682Z,1516403548.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:28.696Z,1516403548.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:29.087Z,1516403549.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:29.101Z,1516403549.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:32.167Z,1516403552.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:32.195Z,1516403552.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:32.296Z,1516403552.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:32.310Z,1516403552.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:32.651Z,1516403552.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:32.666Z,1516403552.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:33.052Z,1516403553.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:33.066Z,1516403553.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:33.444Z,1516403553.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:33.459Z,1516403553.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:33.866Z,1516403553.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:33.889Z,1516403553.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:34.262Z,1516403554.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:34.295Z,1516403554.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:34.658Z,1516403554.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:34.672Z,1516403554.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:35.050Z,1516403555.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:35.064Z,1516403555.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:35.450Z,1516403555.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:35.464Z,1516403555.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:35.850Z,1516403555.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:35.864Z,1516403555.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:36.252Z,1516403556.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:36.271Z,1516403556.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:36.666Z,1516403556.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:36.697Z,1516403556.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:37.055Z,1516403557.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:37.071Z,1516403557.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:37.466Z,1516403557.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:37.496Z,1516403557.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:37.852Z,1516403557.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:37.866Z,1516403557.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:38.246Z,1516403558.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:38.273Z,1516403558.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:38.661Z,1516403558.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:38.675Z,1516403558.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:39.062Z,1516403559.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:39.076Z,1516403559.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:39.458Z,1516403559.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:39.472Z,1516403559.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:39.856Z,1516403559.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:39.870Z,1516403559.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:40.259Z,1516403560.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:40.273Z,1516403560.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:40.662Z,1516403560.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:40.677Z,1516403560.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:41.062Z,1516403561.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:41.076Z,1516403561.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:41.458Z,1516403561.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:41.472Z,1516403561.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:41.862Z,1516403561.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:41.876Z,1516403561.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:42.259Z,1516403562.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:42.279Z,1516403562.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:42.659Z,1516403562.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:42.673Z,1516403562.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:43.058Z,1516403563.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:43.079Z,1516403563.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:43.461Z,1516403563.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:43.475Z,1516403563.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:43.860Z,1516403563.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:43.874Z,1516403563.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:44.248Z,1516403564.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:44.275Z,1516403564.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:44.662Z,1516403564.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:44.677Z,1516403564.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:45.066Z,1516403565.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:45.080Z,1516403565.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:45.454Z,1516403565.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:45.491Z,1516403565.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:45.857Z,1516403565.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:45.872Z,1516403565.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:46.244Z,1516403566.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:46.279Z,1516403566.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:46.672Z,1516403566.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:46.688Z,1516403566.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:47.069Z,1516403567.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:47.084Z,1516403567.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:47.470Z,1516403567.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:47.484Z,1516403567.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:47.844Z,1516403567.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:47.879Z,1516403567.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:48.255Z,1516403568.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:48.277Z,1516403568.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:48.663Z,1516403568.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:48.677Z,1516403568.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:49.059Z,1516403569.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:49.080Z,1516403569.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:49.466Z,1516403569.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:49.480Z,1516403569.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:49.860Z,1516403569.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:49.875Z,1516403569.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:50.242Z,1516403570.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:50.277Z,1516403570.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:50.666Z,1516403570.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:50.687Z,1516403570.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:51.070Z,1516403571.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:51.085Z,1516403571.085 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:51.085Z,1516403571.085 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-01-19T23:12:51.085Z,1516403571.085 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:12:51.087Z,1516403571.087 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:51.087Z,1516403571.087 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-01-19T23:12:51.087Z,1516403571.087 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:12:51.089Z,1516403571.089 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:51.089Z,1516403571.089 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2018-01-19T23:12:51.089Z,1516403571.089 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:12:51.145Z,1516403571.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:12:51.146Z,1516403571.146 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:12:51.146Z,1516403571.146 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:12:51.450Z,1516403571.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:51.505Z,1516403571.505 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:12:51.505Z,1516403571.505 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-01-19T23:12:51.506Z,1516403571.506 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:12:51.506Z,1516403571.506 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-01-19T23:12:51.506Z,1516403571.506 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:12:51.506Z,1516403571.506 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2018-01-19T23:12:51.854Z,1516403571.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:51.878Z,1516403571.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:12:51.878Z,1516403571.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:12:51.879Z,1516403571.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:12:51.879Z,1516403571.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:12:51.879Z,1516403571.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:12:51.880Z,1516403571.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:12:51.880Z,1516403571.880 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:12:51.880Z,1516403571.880 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:12:51.882Z,1516403571.882 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:12:52.254Z,1516403572.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:52.286Z,1516403572.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:12:52.287Z,1516403572.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:52.658Z,1516403572.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:52.681Z,1516403572.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:12:52.682Z,1516403572.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:53.064Z,1516403573.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:53.084Z,1516403573.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:12:53.085Z,1516403573.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:53.464Z,1516403573.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:53.486Z,1516403573.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:12:53.487Z,1516403573.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:53.854Z,1516403573.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:53.884Z,1516403573.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:12:53.886Z,1516403573.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:54.252Z,1516403574.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:54.278Z,1516403574.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:12:54.279Z,1516403574.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:54.659Z,1516403574.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:54.686Z,1516403574.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:12:54.687Z,1516403574.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:55.051Z,1516403575.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:55.067Z,1516403575.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:12:55.068Z,1516403575.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:55.463Z,1516403575.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:55.491Z,1516403575.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:12:55.492Z,1516403575.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:55.845Z,1516403575.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:55.858Z,1516403575.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:12:55.859Z,1516403575.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:56.247Z,1516403576.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:56.290Z,1516403576.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:12:56.291Z,1516403576.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:56.654Z,1516403576.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:56.670Z,1516403576.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:12:56.671Z,1516403576.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:57.066Z,1516403577.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:57.080Z,1516403577.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:12:57.104Z,1516403577.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:57.455Z,1516403577.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:57.474Z,1516403577.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:12:57.475Z,1516403577.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:57.858Z,1516403577.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:57.898Z,1516403577.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:12:57.899Z,1516403577.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:58.248Z,1516403578.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:58.294Z,1516403578.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:12:58.295Z,1516403578.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:58.651Z,1516403578.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:58.659Z,1516403578.659 [PNI_TCM](ERROR): CRC does not match. Expected:0x51961 got:0x39483
2018-01-19T23:12:58.695Z,1516403578.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:12:58.696Z,1516403578.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:59.051Z,1516403579.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:59.071Z,1516403579.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:12:59.072Z,1516403579.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:59.448Z,1516403579.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:59.479Z,1516403579.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:12:59.480Z,1516403579.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:12:59.855Z,1516403579.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:12:59.876Z,1516403579.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:12:59.878Z,1516403579.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:00.264Z,1516403580.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:00.299Z,1516403580.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:13:00.299Z,1516403580.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:00.661Z,1516403580.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:00.678Z,1516403580.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:13:00.679Z,1516403580.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:01.044Z,1516403581.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:01.080Z,1516403581.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:13:01.081Z,1516403581.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:01.455Z,1516403581.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:01.472Z,1516403581.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:13:01.473Z,1516403581.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:01.859Z,1516403581.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:01.872Z,1516403581.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:13:01.873Z,1516403581.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:02.264Z,1516403582.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:02.278Z,1516403582.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:13:02.279Z,1516403582.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:02.654Z,1516403582.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:02.699Z,1516403582.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:13:02.700Z,1516403582.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:03.103Z,1516403583.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:03.116Z,1516403583.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:13:03.117Z,1516403583.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:03.458Z,1516403583.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:03.473Z,1516403583.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:13:03.474Z,1516403583.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:03.858Z,1516403583.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:03.878Z,1516403583.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:13:03.879Z,1516403583.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:04.256Z,1516403584.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:04.295Z,1516403584.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:13:04.296Z,1516403584.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:04.640Z,1516403584.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:04.676Z,1516403584.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:13:04.681Z,1516403584.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:05.057Z,1516403585.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:05.073Z,1516403585.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:13:05.074Z,1516403585.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:05.459Z,1516403585.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:05.473Z,1516403585.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:13:05.474Z,1516403585.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:05.858Z,1516403585.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:05.902Z,1516403585.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:13:05.903Z,1516403585.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:06.262Z,1516403586.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:06.279Z,1516403586.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:13:06.280Z,1516403586.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:06.664Z,1516403586.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:06.678Z,1516403586.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:13:06.679Z,1516403586.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:07.037Z,1516403587.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:07.082Z,1516403587.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:13:07.083Z,1516403587.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:07.454Z,1516403587.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:07.502Z,1516403587.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:13:07.503Z,1516403587.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:07.856Z,1516403587.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:07.872Z,1516403587.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:13:07.874Z,1516403587.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:08.249Z,1516403588.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:08.267Z,1516403588.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:13:08.268Z,1516403588.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:08.646Z,1516403588.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:08.682Z,1516403588.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:13:08.683Z,1516403588.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:09.066Z,1516403589.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:09.105Z,1516403589.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:13:09.106Z,1516403589.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:09.462Z,1516403589.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:09.480Z,1516403589.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:13:09.481Z,1516403589.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:09.867Z,1516403589.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:09.882Z,1516403589.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T23:13:09.883Z,1516403589.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:10.251Z,1516403590.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:10.273Z,1516403590.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T23:13:10.274Z,1516403590.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:10.650Z,1516403590.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:10.683Z,1516403590.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:13:10.685Z,1516403590.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:11.050Z,1516403591.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:11.069Z,1516403591.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T23:13:11.070Z,1516403591.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:11.456Z,1516403591.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:11.475Z,1516403591.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:11.865Z,1516403591.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:11.879Z,1516403591.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:12.264Z,1516403592.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:12.305Z,1516403592.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:12.666Z,1516403592.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:12.688Z,1516403592.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:13.055Z,1516403593.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:13.078Z,1516403593.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:13.446Z,1516403593.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:13.478Z,1516403593.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:13.857Z,1516403593.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:13.871Z,1516403593.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:14.240Z,1516403594.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:14.270Z,1516403594.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:14.663Z,1516403594.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:14.681Z,1516403594.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:15.069Z,1516403595.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:15.084Z,1516403595.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:15.468Z,1516403595.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:15.510Z,1516403595.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:15.861Z,1516403595.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:15.885Z,1516403595.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:16.257Z,1516403596.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:16.272Z,1516403596.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:16.643Z,1516403596.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:16.681Z,1516403596.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:17.044Z,1516403597.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:17.070Z,1516403597.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:17.447Z,1516403597.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:17.479Z,1516403597.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:17.858Z,1516403597.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:17.874Z,1516403597.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:18.268Z,1516403598.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:18.284Z,1516403598.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:18.667Z,1516403598.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:18.717Z,1516403598.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:19.047Z,1516403599.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:19.073Z,1516403599.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:19.444Z,1516403599.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:19.471Z,1516403599.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:19.848Z,1516403599.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:19.880Z,1516403599.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:20.241Z,1516403600.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:20.267Z,1516403600.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:20.644Z,1516403600.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:20.679Z,1516403600.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:21.059Z,1516403601.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:21.091Z,1516403601.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:21.471Z,1516403601.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:21.492Z,1516403601.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:21.859Z,1516403601.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:21.920Z,1516403601.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:22.248Z,1516403602.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:22.279Z,1516403602.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:22.647Z,1516403602.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:22.663Z,1516403602.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:23.052Z,1516403603.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:23.067Z,1516403603.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:23.451Z,1516403603.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:23.466Z,1516403603.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:23.867Z,1516403603.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:23.898Z,1516403603.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:24.262Z,1516403604.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:24.300Z,1516403604.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:24.666Z,1516403604.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:24.699Z,1516403604.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:25.048Z,1516403605.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:25.070Z,1516403605.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:25.453Z,1516403605.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:25.467Z,1516403605.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:25.849Z,1516403605.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:25.863Z,1516403605.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:26.248Z,1516403606.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:26.273Z,1516403606.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:26.654Z,1516403606.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:26.668Z,1516403606.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:27.053Z,1516403607.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:27.067Z,1516403607.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:27.466Z,1516403607.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:27.480Z,1516403607.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:27.859Z,1516403607.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:27.873Z,1516403607.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:28.276Z,1516403608.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:28.289Z,1516403608.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:28.654Z,1516403608.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:28.680Z,1516403608.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:29.046Z,1516403609.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:29.079Z,1516403609.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:29.446Z,1516403609.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:29.495Z,1516403609.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:36.092Z,1516403616.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:36.171Z,1516403616.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:36.288Z,1516403616.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:36.362Z,1516403616.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:36.666Z,1516403616.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:36.680Z,1516403616.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:37.065Z,1516403617.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:37.080Z,1516403617.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:37.472Z,1516403617.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:37.528Z,1516403617.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:37.865Z,1516403617.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:37.915Z,1516403617.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:38.269Z,1516403618.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:38.312Z,1516403618.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:38.665Z,1516403618.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:38.680Z,1516403618.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:39.072Z,1516403619.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:39.126Z,1516403619.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:39.472Z,1516403619.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:39.491Z,1516403619.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:39.867Z,1516403619.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:39.910Z,1516403619.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:40.268Z,1516403620.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:40.325Z,1516403620.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:40.666Z,1516403620.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:40.706Z,1516403620.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:41.066Z,1516403621.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:41.099Z,1516403621.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:41.457Z,1516403621.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:41.494Z,1516403621.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:41.878Z,1516403621.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:41.892Z,1516403621.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:42.290Z,1516403622.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:42.307Z,1516403622.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:42.680Z,1516403622.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:42.694Z,1516403622.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:43.059Z,1516403623.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:43.090Z,1516403623.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:43.455Z,1516403623.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:43.490Z,1516403623.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:43.851Z,1516403623.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:43.865Z,1516403623.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:44.256Z,1516403624.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:44.294Z,1516403624.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:44.655Z,1516403624.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:44.670Z,1516403624.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:45.070Z,1516403625.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:45.096Z,1516403625.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:45.474Z,1516403625.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:45.508Z,1516403625.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:45.870Z,1516403625.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:45.895Z,1516403625.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:46.255Z,1516403626.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:46.269Z,1516403626.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:46.659Z,1516403626.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:46.695Z,1516403626.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:47.064Z,1516403627.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:47.078Z,1516403627.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:47.463Z,1516403627.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:47.477Z,1516403627.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:47.874Z,1516403627.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:47.905Z,1516403627.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:48.274Z,1516403628.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:48.304Z,1516403628.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:48.674Z,1516403628.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:48.707Z,1516403628.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:49.065Z,1516403629.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:49.079Z,1516403629.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:49.464Z,1516403629.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:49.483Z,1516403629.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:49.864Z,1516403629.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:49.878Z,1516403629.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:50.265Z,1516403630.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:50.279Z,1516403630.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:50.661Z,1516403630.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:50.679Z,1516403630.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:51.078Z,1516403631.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:51.092Z,1516403631.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:51.476Z,1516403631.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:51.495Z,1516403631.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:51.877Z,1516403631.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:51.891Z,1516403631.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:52.252Z,1516403632.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:52.278Z,1516403632.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:52.658Z,1516403632.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:52.680Z,1516403632.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:53.058Z,1516403633.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:53.089Z,1516403633.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:53.468Z,1516403633.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:53.481Z,1516403633.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:53.874Z,1516403633.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:53.888Z,1516403633.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:54.277Z,1516403634.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:54.291Z,1516403634.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:54.669Z,1516403634.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:54.695Z,1516403634.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:55.056Z,1516403635.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:55.091Z,1516403635.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:55.459Z,1516403635.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:55.485Z,1516403635.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:55.851Z,1516403635.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:55.883Z,1516403635.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:56.258Z,1516403636.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:56.283Z,1516403636.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:56.655Z,1516403636.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:56.680Z,1516403636.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:57.071Z,1516403637.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:57.085Z,1516403637.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:57.482Z,1516403637.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:57.496Z,1516403637.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:57.874Z,1516403637.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:57.888Z,1516403637.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:58.250Z,1516403638.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:58.287Z,1516403638.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:58.659Z,1516403638.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:58.685Z,1516403638.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:59.056Z,1516403639.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:59.087Z,1516403639.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:59.459Z,1516403639.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:59.487Z,1516403639.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:13:59.874Z,1516403639.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:13:59.896Z,1516403639.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:00.278Z,1516403640.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:00.293Z,1516403640.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:00.662Z,1516403640.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:00.698Z,1516403640.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:01.054Z,1516403641.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:01.077Z,1516403641.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:01.460Z,1516403641.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:01.491Z,1516403641.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:01.852Z,1516403641.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:01.867Z,1516403641.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:02.254Z,1516403642.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:02.269Z,1516403642.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:02.659Z,1516403642.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:02.675Z,1516403642.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:03.071Z,1516403643.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:03.103Z,1516403643.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:03.466Z,1516403643.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:03.501Z,1516403643.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:03.874Z,1516403643.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:03.903Z,1516403643.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:04.263Z,1516403644.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:04.278Z,1516403644.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:04.656Z,1516403644.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:04.675Z,1516403644.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:05.061Z,1516403645.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:05.075Z,1516403645.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:05.463Z,1516403645.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:05.477Z,1516403645.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:05.866Z,1516403645.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:05.881Z,1516403645.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:06.274Z,1516403646.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:06.288Z,1516403646.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:06.678Z,1516403646.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:06.711Z,1516403646.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:07.052Z,1516403647.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:07.075Z,1516403647.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:07.462Z,1516403647.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:07.482Z,1516403647.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:07.859Z,1516403647.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:07.884Z,1516403647.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:08.268Z,1516403648.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:08.283Z,1516403648.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:08.663Z,1516403648.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:08.677Z,1516403648.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:09.070Z,1516403649.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:09.091Z,1516403649.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:09.467Z,1516403649.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:09.495Z,1516403649.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:09.873Z,1516403649.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:09.888Z,1516403649.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:10.268Z,1516403650.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:10.282Z,1516403650.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:10.666Z,1516403650.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:10.680Z,1516403650.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:11.062Z,1516403651.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:11.081Z,1516403651.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:11.464Z,1516403651.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:11.478Z,1516403651.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:11.874Z,1516403651.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:11.888Z,1516403651.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:12.274Z,1516403652.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:12.288Z,1516403652.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:12.673Z,1516403652.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:12.687Z,1516403652.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:13.061Z,1516403653.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:13.075Z,1516403653.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:13.461Z,1516403653.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:13.480Z,1516403653.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:13.858Z,1516403653.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:13.883Z,1516403653.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:14.268Z,1516403654.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:14.283Z,1516403654.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:14.661Z,1516403654.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:14.680Z,1516403654.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:15.069Z,1516403655.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:15.084Z,1516403655.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:15.472Z,1516403655.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:15.487Z,1516403655.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:15.872Z,1516403655.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:15.887Z,1516403655.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:16.268Z,1516403656.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:16.282Z,1516403656.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:16.666Z,1516403656.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:16.680Z,1516403656.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:17.060Z,1516403657.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:17.081Z,1516403657.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:17.451Z,1516403657.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:17.484Z,1516403657.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:17.874Z,1516403657.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:17.888Z,1516403657.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:18.276Z,1516403658.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:18.295Z,1516403658.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:18.678Z,1516403658.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:18.698Z,1516403658.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:19.049Z,1516403659.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:19.072Z,1516403659.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:19.455Z,1516403659.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:19.486Z,1516403659.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:19.868Z,1516403659.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:19.882Z,1516403659.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:20.268Z,1516403660.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:20.283Z,1516403660.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:20.655Z,1516403660.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:20.686Z,1516403660.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:21.079Z,1516403661.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:21.093Z,1516403661.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:21.469Z,1516403661.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:21.492Z,1516403661.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:21.878Z,1516403661.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:21.892Z,1516403661.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:22.251Z,1516403662.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:22.283Z,1516403662.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:22.659Z,1516403662.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:22.684Z,1516403662.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:23.056Z,1516403663.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:23.082Z,1516403663.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:23.451Z,1516403663.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:23.483Z,1516403663.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:23.878Z,1516403663.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:23.892Z,1516403663.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:24.278Z,1516403664.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:24.292Z,1516403664.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:24.669Z,1516403664.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:24.692Z,1516403664.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:25.060Z,1516403665.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:25.085Z,1516403665.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:25.455Z,1516403665.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:25.480Z,1516403665.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:25.875Z,1516403665.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:25.889Z,1516403665.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:26.272Z,1516403666.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:26.291Z,1516403666.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:26.670Z,1516403666.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:26.691Z,1516403666.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:27.050Z,1516403667.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:27.088Z,1516403667.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:27.453Z,1516403667.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:27.476Z,1516403667.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:27.855Z,1516403667.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:27.886Z,1516403667.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:28.252Z,1516403668.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:28.287Z,1516403668.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:28.659Z,1516403668.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:28.684Z,1516403668.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:29.070Z,1516403669.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:29.092Z,1516403669.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:29.475Z,1516403669.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:29.489Z,1516403669.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:32.562Z,1516403672.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:32.595Z,1516403672.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:32.695Z,1516403672.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:32.735Z,1516403672.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:33.052Z,1516403673.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:33.086Z,1516403673.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:33.455Z,1516403673.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:33.481Z,1516403673.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:33.862Z,1516403673.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:33.910Z,1516403673.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:34.266Z,1516403674.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:34.290Z,1516403674.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:34.654Z,1516403674.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:34.669Z,1516403674.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:35.052Z,1516403675.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:35.066Z,1516403675.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:35.453Z,1516403675.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:35.491Z,1516403675.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:35.861Z,1516403675.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:35.876Z,1516403675.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:36.266Z,1516403676.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:36.280Z,1516403676.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:36.658Z,1516403676.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:36.673Z,1516403676.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:37.050Z,1516403677.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:37.073Z,1516403677.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:37.456Z,1516403677.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:37.475Z,1516403677.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:37.862Z,1516403677.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:37.877Z,1516403677.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:38.263Z,1516403678.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:38.277Z,1516403678.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:38.659Z,1516403678.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:38.673Z,1516403678.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:39.055Z,1516403679.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:39.069Z,1516403679.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:39.442Z,1516403679.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:39.479Z,1516403679.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:39.867Z,1516403679.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:39.881Z,1516403679.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:40.268Z,1516403680.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:40.283Z,1516403680.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:40.668Z,1516403680.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:40.683Z,1516403680.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:41.056Z,1516403681.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:41.071Z,1516403681.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:41.443Z,1516403681.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:41.480Z,1516403681.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:41.866Z,1516403681.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:41.881Z,1516403681.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:42.285Z,1516403682.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:42.315Z,1516403682.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:42.666Z,1516403682.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:42.687Z,1516403682.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:43.056Z,1516403683.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:43.071Z,1516403683.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:43.443Z,1516403683.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:43.475Z,1516403683.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:43.862Z,1516403683.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:43.883Z,1516403683.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:44.269Z,1516403684.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:44.283Z,1516403684.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:44.656Z,1516403684.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:44.675Z,1516403684.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:45.053Z,1516403685.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:45.075Z,1516403685.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:45.456Z,1516403685.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:45.471Z,1516403685.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:45.858Z,1516403685.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:45.873Z,1516403685.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:46.270Z,1516403686.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:46.284Z,1516403686.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:46.659Z,1516403686.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:46.674Z,1516403686.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:47.040Z,1516403687.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:47.066Z,1516403687.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:47.443Z,1516403687.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:47.476Z,1516403687.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:47.858Z,1516403687.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:47.877Z,1516403687.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:48.262Z,1516403688.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:48.276Z,1516403688.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:48.663Z,1516403688.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:48.683Z,1516403688.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:49.056Z,1516403689.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:49.071Z,1516403689.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:49.439Z,1516403689.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:49.470Z,1516403689.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:49.863Z,1516403689.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:49.878Z,1516403689.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:50.268Z,1516403690.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:50.288Z,1516403690.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:50.666Z,1516403690.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:50.680Z,1516403690.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:51.044Z,1516403691.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:51.075Z,1516403691.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:51.439Z,1516403691.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:51.465Z,1516403691.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:51.857Z,1516403691.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:51.875Z,1516403691.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:52.265Z,1516403692.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:52.280Z,1516403692.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:52.658Z,1516403692.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:52.676Z,1516403692.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:53.044Z,1516403693.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:53.069Z,1516403693.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:53.443Z,1516403693.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:53.478Z,1516403693.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:53.866Z,1516403693.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:53.880Z,1516403693.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:54.261Z,1516403694.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:54.276Z,1516403694.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:54.663Z,1516403694.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:54.677Z,1516403694.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:55.044Z,1516403695.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:55.075Z,1516403695.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:55.439Z,1516403695.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:55.470Z,1516403695.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:55.866Z,1516403695.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:55.881Z,1516403695.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:56.262Z,1516403696.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:56.276Z,1516403696.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:56.658Z,1516403696.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:56.672Z,1516403696.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:57.044Z,1516403697.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:57.074Z,1516403697.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:57.447Z,1516403697.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:57.473Z,1516403697.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:57.858Z,1516403697.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:57.873Z,1516403697.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:58.266Z,1516403698.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:58.281Z,1516403698.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:58.666Z,1516403698.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:58.680Z,1516403698.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:59.039Z,1516403699.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:59.071Z,1516403699.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:59.448Z,1516403699.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:59.474Z,1516403699.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:14:59.839Z,1516403699.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:14:59.875Z,1516403699.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:00.250Z,1516403700.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:00.282Z,1516403700.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:00.665Z,1516403700.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:00.684Z,1516403700.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:01.050Z,1516403701.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:01.087Z,1516403701.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:01.447Z,1516403701.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:01.472Z,1516403701.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:01.844Z,1516403701.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:01.875Z,1516403701.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:02.241Z,1516403702.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:02.272Z,1516403702.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:02.647Z,1516403702.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:02.681Z,1516403702.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:03.058Z,1516403703.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:03.087Z,1516403703.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:03.465Z,1516403703.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:03.479Z,1516403703.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:03.866Z,1516403703.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:03.880Z,1516403703.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:04.255Z,1516403704.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:04.279Z,1516403704.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:04.648Z,1516403704.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:04.679Z,1516403704.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:05.048Z,1516403705.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:05.071Z,1516403705.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:05.448Z,1516403705.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:05.462Z,1516403705.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:05.844Z,1516403705.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:05.859Z,1516403705.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:06.262Z,1516403706.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:06.285Z,1516403706.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:06.666Z,1516403706.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:06.695Z,1516403706.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:07.062Z,1516403707.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:07.086Z,1516403707.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:07.451Z,1516403707.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:07.466Z,1516403707.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:07.851Z,1516403707.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:07.871Z,1516403707.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:08.249Z,1516403708.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:08.263Z,1516403708.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:08.652Z,1516403708.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:08.666Z,1516403708.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:09.066Z,1516403709.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:09.096Z,1516403709.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:09.454Z,1516403709.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:09.468Z,1516403709.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:09.865Z,1516403709.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:09.895Z,1516403709.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:10.252Z,1516403710.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:10.271Z,1516403710.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:10.652Z,1516403710.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:10.667Z,1516403710.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:11.052Z,1516403711.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:11.066Z,1516403711.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:11.453Z,1516403711.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:11.467Z,1516403711.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:11.853Z,1516403711.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:11.867Z,1516403711.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:12.266Z,1516403712.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:12.280Z,1516403712.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:12.662Z,1516403712.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:12.676Z,1516403712.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:13.058Z,1516403713.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:13.073Z,1516403713.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:13.455Z,1516403713.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:13.469Z,1516403713.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:13.853Z,1516403713.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:13.875Z,1516403713.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:14.256Z,1516403714.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:14.275Z,1516403714.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:14.655Z,1516403714.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:14.669Z,1516403714.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:15.058Z,1516403715.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:15.072Z,1516403715.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:15.462Z,1516403715.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:15.476Z,1516403715.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:15.857Z,1516403715.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:15.871Z,1516403715.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:16.257Z,1516403716.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:16.271Z,1516403716.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:16.644Z,1516403716.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:16.684Z,1516403716.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:17.057Z,1516403717.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:17.072Z,1516403717.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:17.455Z,1516403717.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:17.469Z,1516403717.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:17.839Z,1516403717.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:17.871Z,1516403717.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:18.268Z,1516403718.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:18.282Z,1516403718.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:18.670Z,1516403718.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:18.684Z,1516403718.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:19.067Z,1516403719.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:19.081Z,1516403719.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:19.439Z,1516403719.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:19.472Z,1516403719.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:19.843Z,1516403719.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:19.870Z,1516403719.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:20.240Z,1516403720.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:20.272Z,1516403720.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:20.639Z,1516403720.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:20.670Z,1516403720.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:21.062Z,1516403721.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:21.076Z,1516403721.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:21.462Z,1516403721.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:21.476Z,1516403721.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:21.858Z,1516403721.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:21.873Z,1516403721.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:22.266Z,1516403722.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:22.282Z,1516403722.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:22.656Z,1516403722.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:22.670Z,1516403722.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:23.044Z,1516403723.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:23.070Z,1516403723.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:23.445Z,1516403723.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:23.479Z,1516403723.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:23.857Z,1516403723.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:23.871Z,1516403723.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:24.258Z,1516403724.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:24.273Z,1516403724.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:24.667Z,1516403724.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:24.681Z,1516403724.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:25.066Z,1516403725.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:25.087Z,1516403725.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:25.456Z,1516403725.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:25.470Z,1516403725.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:25.843Z,1516403725.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:25.874Z,1516403725.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:26.256Z,1516403726.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:26.271Z,1516403726.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:26.639Z,1516403726.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:26.671Z,1516403726.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:27.057Z,1516403727.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:27.076Z,1516403727.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:27.468Z,1516403727.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:27.483Z,1516403727.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:27.866Z,1516403727.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:27.881Z,1516403727.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:28.243Z,1516403728.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:28.274Z,1516403728.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:28.655Z,1516403728.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:28.675Z,1516403728.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:29.039Z,1516403729.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:29.070Z,1516403729.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:29.448Z,1516403729.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:29.473Z,1516403729.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:29.848Z,1516403729.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:29.874Z,1516403729.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:32.956Z,1516403732.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:32.971Z,1516403732.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:33.087Z,1516403733.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:33.119Z,1516403733.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:33.434Z,1516403733.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:33.448Z,1516403733.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:33.831Z,1516403733.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:33.845Z,1516403733.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:34.220Z,1516403734.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:34.246Z,1516403734.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:34.630Z,1516403734.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:34.644Z,1516403734.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:35.034Z,1516403735.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:35.048Z,1516403735.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:35.431Z,1516403735.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:35.451Z,1516403735.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:35.833Z,1516403735.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:35.847Z,1516403735.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:36.231Z,1516403736.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:36.245Z,1516403736.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:36.625Z,1516403736.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:36.639Z,1516403736.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:37.023Z,1516403737.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:37.052Z,1516403737.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:37.432Z,1516403737.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:37.446Z,1516403737.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:37.831Z,1516403737.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:37.851Z,1516403737.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:38.234Z,1516403738.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:38.248Z,1516403738.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:38.633Z,1516403738.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:38.654Z,1516403738.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:39.031Z,1516403739.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:39.053Z,1516403739.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:39.431Z,1516403739.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:39.451Z,1516403739.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:39.833Z,1516403739.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:39.878Z,1516403739.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:40.225Z,1516403740.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:40.244Z,1516403740.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:40.627Z,1516403740.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:40.641Z,1516403740.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:41.034Z,1516403741.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:41.048Z,1516403741.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:41.433Z,1516403741.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:41.447Z,1516403741.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:41.837Z,1516403741.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:41.852Z,1516403741.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:42.232Z,1516403742.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:42.246Z,1516403742.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:42.625Z,1516403742.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:42.639Z,1516403742.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:43.027Z,1516403743.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:43.047Z,1516403743.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:43.433Z,1516403743.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:43.446Z,1516403743.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:43.830Z,1516403743.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:43.844Z,1516403743.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:44.236Z,1516403744.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:44.251Z,1516403744.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:44.637Z,1516403744.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:44.651Z,1516403744.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:45.033Z,1516403745.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:45.048Z,1516403745.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:45.426Z,1516403745.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:45.444Z,1516403745.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:45.832Z,1516403745.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:45.845Z,1516403745.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:46.224Z,1516403746.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:46.238Z,1516403746.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:46.626Z,1516403746.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:46.644Z,1516403746.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:47.037Z,1516403747.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:47.051Z,1516403747.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:47.433Z,1516403747.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:47.447Z,1516403747.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:47.836Z,1516403747.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:47.855Z,1516403747.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:48.232Z,1516403748.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:48.246Z,1516403748.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:48.625Z,1516403748.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:48.639Z,1516403748.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:49.027Z,1516403749.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:49.042Z,1516403749.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:49.425Z,1516403749.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:49.439Z,1516403749.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:49.832Z,1516403749.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:49.846Z,1516403749.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:50.238Z,1516403750.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:50.252Z,1516403750.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:50.638Z,1516403750.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:50.652Z,1516403750.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:51.038Z,1516403751.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:51.053Z,1516403751.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:51.426Z,1516403751.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:51.445Z,1516403751.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:51.833Z,1516403751.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:51.847Z,1516403751.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:52.230Z,1516403752.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:52.244Z,1516403752.244 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:52.244Z,1516403752.244 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-01-19T23:15:52.244Z,1516403752.244 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:15:52.246Z,1516403752.246 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:52.246Z,1516403752.246 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-01-19T23:15:52.247Z,1516403752.247 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:15:52.248Z,1516403752.248 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:52.248Z,1516403752.248 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2018-01-19T23:15:52.248Z,1516403752.248 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:15:52.260Z,1516403752.260 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:15:52.260Z,1516403752.260 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:15:52.273Z,1516403752.273 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:15:52.639Z,1516403752.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:52.697Z,1516403752.697 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:15:52.697Z,1516403752.697 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-01-19T23:15:52.698Z,1516403752.698 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:15:52.698Z,1516403752.698 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-01-19T23:15:52.698Z,1516403752.698 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:15:52.698Z,1516403752.698 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2018-01-19T23:15:53.043Z,1516403753.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:53.055Z,1516403753.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:15:53.056Z,1516403753.056 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:15:53.056Z,1516403753.056 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:15:53.057Z,1516403753.057 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:15:53.057Z,1516403753.057 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:15:53.057Z,1516403753.057 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:15:53.058Z,1516403753.058 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:15:53.058Z,1516403753.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:15:53.058Z,1516403753.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:15:53.434Z,1516403753.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:53.452Z,1516403753.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:15:53.457Z,1516403753.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:53.840Z,1516403753.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:53.854Z,1516403753.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:15:53.855Z,1516403753.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:54.224Z,1516403754.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:54.251Z,1516403754.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:15:54.252Z,1516403754.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:54.617Z,1516403754.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:54.643Z,1516403754.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:15:54.644Z,1516403754.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:55.023Z,1516403755.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:55.054Z,1516403755.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:15:55.055Z,1516403755.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:55.416Z,1516403755.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:55.453Z,1516403755.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:15:55.454Z,1516403755.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:55.813Z,1516403755.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:55.827Z,1516403755.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:15:55.828Z,1516403755.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:56.243Z,1516403756.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:56.257Z,1516403756.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:15:56.258Z,1516403756.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:56.630Z,1516403756.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:56.656Z,1516403756.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:15:56.657Z,1516403756.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:57.030Z,1516403757.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:57.067Z,1516403757.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:15:57.068Z,1516403757.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:57.423Z,1516403757.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:57.455Z,1516403757.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:15:57.456Z,1516403757.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:57.815Z,1516403757.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:57.859Z,1516403757.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:15:57.860Z,1516403757.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:58.224Z,1516403758.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:58.254Z,1516403758.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:15:58.254Z,1516403758.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:58.623Z,1516403758.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:58.653Z,1516403758.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:15:58.654Z,1516403758.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:59.030Z,1516403759.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:59.062Z,1516403759.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:15:59.063Z,1516403759.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:59.430Z,1516403759.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:59.462Z,1516403759.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:15:59.463Z,1516403759.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:15:59.842Z,1516403759.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:15:59.856Z,1516403759.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:15:59.857Z,1516403759.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:00.216Z,1516403760.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:00.258Z,1516403760.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:16:00.258Z,1516403760.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:00.618Z,1516403760.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:00.632Z,1516403760.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:16:00.649Z,1516403760.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:01.020Z,1516403761.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:01.034Z,1516403761.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:16:01.035Z,1516403761.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:01.425Z,1516403761.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:01.438Z,1516403761.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:16:01.439Z,1516403761.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:01.820Z,1516403761.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:01.836Z,1516403761.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:16:01.836Z,1516403761.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:02.240Z,1516403762.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:02.264Z,1516403762.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:16:02.265Z,1516403762.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:02.642Z,1516403762.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:02.666Z,1516403762.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:16:02.667Z,1516403762.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:03.026Z,1516403763.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:03.063Z,1516403763.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:16:03.064Z,1516403763.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:03.425Z,1516403763.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:03.440Z,1516403763.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:16:03.441Z,1516403763.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:03.827Z,1516403763.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:03.842Z,1516403763.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:16:03.843Z,1516403763.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:04.225Z,1516403764.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:04.239Z,1516403764.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:16:04.240Z,1516403764.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:04.624Z,1516403764.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:04.642Z,1516403764.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:16:04.643Z,1516403764.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:05.026Z,1516403765.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:05.040Z,1516403765.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:16:05.041Z,1516403765.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:05.430Z,1516403765.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:05.444Z,1516403765.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:16:05.445Z,1516403765.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:05.834Z,1516403765.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:05.848Z,1516403765.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:16:05.861Z,1516403765.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:06.228Z,1516403766.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:06.242Z,1516403766.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:16:06.243Z,1516403766.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:06.623Z,1516403766.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:06.636Z,1516403766.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:16:06.638Z,1516403766.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:07.024Z,1516403767.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:07.042Z,1516403767.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:16:07.043Z,1516403767.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:07.424Z,1516403767.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:07.438Z,1516403767.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:16:07.439Z,1516403767.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:07.823Z,1516403767.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:07.842Z,1516403767.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:16:07.843Z,1516403767.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:08.242Z,1516403768.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:08.271Z,1516403768.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:16:08.272Z,1516403768.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:08.633Z,1516403768.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:08.646Z,1516403768.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:16:08.647Z,1516403768.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:09.030Z,1516403769.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:09.050Z,1516403769.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:16:09.051Z,1516403769.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:09.428Z,1516403769.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:09.446Z,1516403769.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:16:09.447Z,1516403769.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:09.828Z,1516403769.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:09.842Z,1516403769.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:16:09.843Z,1516403769.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:10.223Z,1516403770.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:10.240Z,1516403770.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:16:10.241Z,1516403770.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:10.627Z,1516403770.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:10.646Z,1516403770.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:16:10.647Z,1516403770.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:11.042Z,1516403771.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:11.056Z,1516403771.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T23:16:11.079Z,1516403771.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:11.428Z,1516403771.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:11.446Z,1516403771.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T23:16:11.447Z,1516403771.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:11.843Z,1516403771.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:11.856Z,1516403771.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:16:11.877Z,1516403771.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:12.232Z,1516403772.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:12.246Z,1516403772.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:12.625Z,1516403772.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:12.639Z,1516403772.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:13.026Z,1516403773.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:13.041Z,1516403773.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:13.424Z,1516403773.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:13.438Z,1516403773.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:13.831Z,1516403773.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:13.851Z,1516403773.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:14.232Z,1516403774.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:14.251Z,1516403774.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:14.634Z,1516403774.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:14.654Z,1516403774.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:15.034Z,1516403775.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:15.048Z,1516403775.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:15.431Z,1516403775.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:15.445Z,1516403775.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:15.832Z,1516403775.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:15.846Z,1516403775.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:16.231Z,1516403776.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:16.251Z,1516403776.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:16.630Z,1516403776.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:16.645Z,1516403776.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:17.034Z,1516403777.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:17.048Z,1516403777.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:17.432Z,1516403777.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:17.451Z,1516403777.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:17.834Z,1516403777.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:17.849Z,1516403777.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:18.232Z,1516403778.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:18.247Z,1516403778.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:18.625Z,1516403778.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:18.640Z,1516403778.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:19.033Z,1516403779.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:19.047Z,1516403779.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:19.434Z,1516403779.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:19.449Z,1516403779.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:19.833Z,1516403779.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:19.847Z,1516403779.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:20.231Z,1516403780.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:20.251Z,1516403780.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:20.632Z,1516403780.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:20.646Z,1516403780.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:21.033Z,1516403781.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:21.047Z,1516403781.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:21.438Z,1516403781.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:21.452Z,1516403781.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:21.835Z,1516403781.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:21.849Z,1516403781.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:22.221Z,1516403782.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:22.241Z,1516403782.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:22.626Z,1516403782.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:22.640Z,1516403782.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:23.034Z,1516403783.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:23.048Z,1516403783.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:23.432Z,1516403783.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:23.451Z,1516403783.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:23.834Z,1516403783.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:23.848Z,1516403783.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:24.227Z,1516403784.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:24.247Z,1516403784.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:24.627Z,1516403784.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:24.641Z,1516403784.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:25.032Z,1516403785.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:25.051Z,1516403785.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:25.438Z,1516403785.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:25.452Z,1516403785.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:25.834Z,1516403785.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:25.849Z,1516403785.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:26.233Z,1516403786.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:26.247Z,1516403786.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:26.627Z,1516403786.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:26.653Z,1516403786.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:27.037Z,1516403787.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:27.051Z,1516403787.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:27.436Z,1516403787.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:27.455Z,1516403787.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:27.838Z,1516403787.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:27.852Z,1516403787.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:28.233Z,1516403788.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:28.248Z,1516403788.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:28.628Z,1516403788.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:28.647Z,1516403788.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:29.039Z,1516403789.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:29.059Z,1516403789.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:29.078Z,1516403789.078 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T23:16:29.078Z,1516403789.078 [Default:CheckIn:C.Wait] Stopped
2018-01-19T23:16:29.078Z,1516403789.078 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T23:16:29.078Z,1516403789.078 [Default:CheckIn:D] Running Loop=1
2018-01-19T23:16:29.438Z,1516403789.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:29.452Z,1516403789.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:29.456Z,1516403789.456 [Default:CheckIn:D] Stopped
2018-01-19T23:16:29.456Z,1516403789.456 [Default:CheckIn:E] Running Loop=1
2018-01-19T23:16:29.833Z,1516403789.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:29.864Z,1516403789.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:29.868Z,1516403789.868 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 123.690503 min 
2018-01-19T23:16:29.868Z,1516403789.868 [Default:CheckIn:E] Stopped
2018-01-19T23:16:29.868Z,1516403789.868 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T23:16:29.868Z,1516403789.868 [Default:CheckIn] Stopped
2018-01-19T23:16:29.868Z,1516403789.868 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T23:16:29.868Z,1516403789.868 [Default:CheckIn](INFO): Running loop #13
2018-01-19T23:16:29.868Z,1516403789.868 [Default:CheckIn] Running Loop=13
2018-01-19T23:16:29.868Z,1516403789.868 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T23:16:29.877Z,1516403789.877 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T23:16:30.230Z,1516403790.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:30.251Z,1516403790.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:33.312Z,1516403793.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:33.340Z,1516403793.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:33.458Z,1516403793.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:33.472Z,1516403793.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:33.806Z,1516403793.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:33.820Z,1516403793.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:34.216Z,1516403794.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:34.244Z,1516403794.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:34.584Z,1516403794.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:34.619Z,1516403794.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:34.993Z,1516403794.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:35.021Z,1516403795.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:35.401Z,1516403795.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:35.415Z,1516403795.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:35.790Z,1516403795.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:35.832Z,1516403795.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:36.204Z,1516403796.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:36.211Z,1516403796.211 [PNI_TCM](ERROR): CRC does not match. Expected:0x16267 got:0x49481
2018-01-19T23:16:36.251Z,1516403796.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:36.606Z,1516403796.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:36.620Z,1516403796.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:36.997Z,1516403796.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:37.027Z,1516403797.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:37.397Z,1516403797.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:37.421Z,1516403797.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:37.805Z,1516403797.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:37.819Z,1516403797.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:38.203Z,1516403798.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:38.218Z,1516403798.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:38.591Z,1516403798.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:38.621Z,1516403798.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:38.999Z,1516403798.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:39.027Z,1516403799.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:39.400Z,1516403799.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:39.412Z,1516403799.412 [PNI_TCM](ERROR): CRC does not match. Expected:0x30106 got:0x30747
2018-01-19T23:16:39.444Z,1516403799.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:39.811Z,1516403799.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:39.831Z,1516403799.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:40.210Z,1516403800.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:40.227Z,1516403800.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:40.593Z,1516403800.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:40.627Z,1516403800.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:40.995Z,1516403800.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:41.013Z,1516403801.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:41.384Z,1516403801.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:41.419Z,1516403801.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:41.802Z,1516403801.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:41.822Z,1516403801.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:42.205Z,1516403802.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:42.251Z,1516403802.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:42.611Z,1516403802.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:42.618Z,1516403802.618 [PNI_TCM](ERROR): CRC does not match. Expected:0x49839 got:0x7361
2018-01-19T23:16:42.635Z,1516403802.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:43.024Z,1516403803.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:43.043Z,1516403803.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:43.389Z,1516403803.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:43.419Z,1516403803.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:43.782Z,1516403803.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:43.824Z,1516403803.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:44.185Z,1516403804.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:44.213Z,1516403804.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:44.598Z,1516403804.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:44.624Z,1516403804.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:44.983Z,1516403804.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:45.026Z,1516403805.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:45.394Z,1516403805.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:45.435Z,1516403805.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:45.818Z,1516403805.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:45.832Z,1516403805.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:46.194Z,1516403806.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:46.229Z,1516403806.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:46.586Z,1516403806.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:46.611Z,1516403806.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:46.987Z,1516403806.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:47.034Z,1516403807.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:47.392Z,1516403807.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:47.434Z,1516403807.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:47.788Z,1516403807.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:47.807Z,1516403807.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:48.208Z,1516403808.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:48.235Z,1516403808.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:48.610Z,1516403808.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:48.638Z,1516403808.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:48.994Z,1516403808.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:49.035Z,1516403809.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:49.395Z,1516403809.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:49.429Z,1516403809.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:49.795Z,1516403809.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:49.810Z,1516403809.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:50.195Z,1516403810.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:50.238Z,1516403810.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:50.596Z,1516403810.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:50.610Z,1516403810.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:50.997Z,1516403810.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:51.015Z,1516403811.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:51.396Z,1516403811.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:51.412Z,1516403811.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:51.810Z,1516403811.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:51.846Z,1516403811.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:52.210Z,1516403812.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:52.241Z,1516403812.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:52.584Z,1516403812.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:52.621Z,1516403812.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:52.998Z,1516403812.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:53.015Z,1516403813.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:53.398Z,1516403813.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:53.439Z,1516403813.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:53.797Z,1516403813.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:53.811Z,1516403813.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:54.211Z,1516403814.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:54.237Z,1516403814.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:54.604Z,1516403814.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:54.620Z,1516403814.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:54.998Z,1516403814.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:55.041Z,1516403815.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:55.397Z,1516403815.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:55.411Z,1516403815.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:55.793Z,1516403815.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:55.822Z,1516403815.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:56.183Z,1516403816.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:56.212Z,1516403816.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:56.594Z,1516403816.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:56.613Z,1516403816.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:56.990Z,1516403816.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:57.024Z,1516403817.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:57.406Z,1516403817.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:57.424Z,1516403817.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:57.814Z,1516403817.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:57.828Z,1516403817.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:58.207Z,1516403818.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:58.252Z,1516403818.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:58.581Z,1516403818.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:58.614Z,1516403818.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:58.998Z,1516403818.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:59.018Z,1516403819.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:59.388Z,1516403819.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:59.419Z,1516403819.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:16:59.798Z,1516403819.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:16:59.816Z,1516403819.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:00.206Z,1516403820.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:00.220Z,1516403820.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:00.610Z,1516403820.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:00.629Z,1516403820.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:01.011Z,1516403821.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:01.027Z,1516403821.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:01.398Z,1516403821.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:01.431Z,1516403821.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:01.801Z,1516403821.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:01.815Z,1516403821.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:02.183Z,1516403822.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:02.208Z,1516403822.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:02.588Z,1516403822.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:02.625Z,1516403822.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:02.987Z,1516403822.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:03.023Z,1516403823.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:03.410Z,1516403823.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:03.431Z,1516403823.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:03.810Z,1516403823.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:03.826Z,1516403823.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:04.207Z,1516403824.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:04.225Z,1516403824.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:04.583Z,1516403824.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:04.618Z,1516403824.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:04.987Z,1516403824.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:05.012Z,1516403825.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:05.388Z,1516403825.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:05.423Z,1516403825.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:05.791Z,1516403825.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:05.819Z,1516403825.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:06.210Z,1516403826.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:06.225Z,1516403826.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:06.608Z,1516403826.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:06.630Z,1516403826.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:07.011Z,1516403827.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:07.025Z,1516403827.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:07.396Z,1516403827.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:07.426Z,1516403827.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:07.784Z,1516403827.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:07.811Z,1516403827.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:08.192Z,1516403828.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:08.223Z,1516403828.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:08.589Z,1516403828.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:08.620Z,1516403828.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:08.996Z,1516403828.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:09.031Z,1516403829.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:09.410Z,1516403829.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:09.429Z,1516403829.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:09.824Z,1516403829.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:09.839Z,1516403829.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:10.214Z,1516403830.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:10.228Z,1516403830.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:10.593Z,1516403830.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:10.616Z,1516403830.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:10.991Z,1516403830.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:11.031Z,1516403831.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:11.396Z,1516403831.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:11.411Z,1516403831.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:11.795Z,1516403831.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:11.815Z,1516403831.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:12.210Z,1516403832.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:12.245Z,1516403832.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:12.610Z,1516403832.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:12.624Z,1516403832.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:13.006Z,1516403833.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:13.020Z,1516403833.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:13.396Z,1516403833.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:13.415Z,1516403833.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:13.801Z,1516403833.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:13.815Z,1516403833.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:14.197Z,1516403834.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:14.212Z,1516403834.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:14.596Z,1516403834.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:14.614Z,1516403834.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:14.993Z,1516403834.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:15.007Z,1516403835.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:15.403Z,1516403835.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:15.417Z,1516403835.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:15.803Z,1516403835.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:15.830Z,1516403835.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:16.211Z,1516403836.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:16.225Z,1516403836.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:16.600Z,1516403836.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:16.619Z,1516403836.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:16.990Z,1516403836.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:17.020Z,1516403837.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:17.384Z,1516403837.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:17.419Z,1516403837.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:17.783Z,1516403837.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:17.815Z,1516403837.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:18.205Z,1516403838.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:18.227Z,1516403838.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:18.606Z,1516403838.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:18.621Z,1516403838.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:19.001Z,1516403839.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:19.015Z,1516403839.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:19.390Z,1516403839.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:19.412Z,1516403839.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:19.797Z,1516403839.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:19.811Z,1516403839.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:20.183Z,1516403840.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:20.214Z,1516403840.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:20.600Z,1516403840.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:20.614Z,1516403840.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:20.983Z,1516403840.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:21.009Z,1516403841.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:21.409Z,1516403841.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:21.423Z,1516403841.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:21.808Z,1516403841.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:21.827Z,1516403841.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:22.200Z,1516403842.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:22.214Z,1516403842.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:22.583Z,1516403842.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:22.611Z,1516403842.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:22.987Z,1516403842.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:23.035Z,1516403843.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:23.401Z,1516403843.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:23.414Z,1516403843.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:23.800Z,1516403843.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:23.814Z,1516403843.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:24.206Z,1516403844.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:24.220Z,1516403844.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:24.606Z,1516403844.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:24.626Z,1516403844.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:25.006Z,1516403845.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:25.020Z,1516403845.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:25.399Z,1516403845.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:25.419Z,1516403845.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:25.783Z,1516403845.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:25.809Z,1516403845.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:26.183Z,1516403846.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:26.208Z,1516403846.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:26.588Z,1516403846.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:26.613Z,1516403846.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:26.983Z,1516403846.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:27.017Z,1516403847.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:27.409Z,1516403847.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:27.424Z,1516403847.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:27.810Z,1516403847.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:27.824Z,1516403847.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:28.197Z,1516403848.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:28.234Z,1516403848.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:28.591Z,1516403848.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:28.622Z,1516403848.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:28.991Z,1516403848.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:29.023Z,1516403849.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:29.384Z,1516403849.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:29.426Z,1516403849.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:29.791Z,1516403849.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:29.822Z,1516403849.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:30.198Z,1516403850.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:30.232Z,1516403850.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:30.611Z,1516403850.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:30.625Z,1516403850.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:33.718Z,1516403853.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:33.735Z,1516403853.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:33.839Z,1516403853.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:33.875Z,1516403853.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:34.187Z,1516403854.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:34.222Z,1516403854.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:34.589Z,1516403854.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:34.628Z,1516403854.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:34.981Z,1516403854.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:34.995Z,1516403854.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:35.402Z,1516403855.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:35.428Z,1516403855.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:35.815Z,1516403855.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:35.830Z,1516403855.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:36.198Z,1516403856.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:36.223Z,1516403856.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:36.591Z,1516403856.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:36.626Z,1516403856.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:36.987Z,1516403856.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:37.023Z,1516403857.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:37.392Z,1516403857.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:37.406Z,1516403857.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:37.791Z,1516403857.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:37.811Z,1516403857.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:38.202Z,1516403858.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:38.233Z,1516403858.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:38.594Z,1516403858.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:38.608Z,1516403858.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:39.006Z,1516403859.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:39.036Z,1516403859.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:39.388Z,1516403859.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:39.415Z,1516403859.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:39.795Z,1516403859.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:39.815Z,1516403859.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:40.191Z,1516403860.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:40.206Z,1516403860.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:40.588Z,1516403860.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:40.610Z,1516403860.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:40.995Z,1516403860.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:41.015Z,1516403861.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:41.400Z,1516403861.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:41.419Z,1516403861.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:41.802Z,1516403861.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:41.816Z,1516403861.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:42.200Z,1516403862.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:42.219Z,1516403862.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:42.589Z,1516403862.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:42.603Z,1516403862.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:42.988Z,1516403862.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:43.014Z,1516403863.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:43.380Z,1516403863.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:43.416Z,1516403863.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:43.795Z,1516403863.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:43.813Z,1516403863.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:44.204Z,1516403864.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:44.219Z,1516403864.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:44.606Z,1516403864.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:44.620Z,1516403864.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:45.006Z,1516403865.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:45.027Z,1516403865.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:45.398Z,1516403865.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:45.413Z,1516403865.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:45.780Z,1516403865.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:45.819Z,1516403865.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:46.197Z,1516403866.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:46.211Z,1516403866.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:46.582Z,1516403866.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:46.618Z,1516403866.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:46.998Z,1516403866.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:47.012Z,1516403867.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:47.404Z,1516403867.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:47.419Z,1516403867.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:47.799Z,1516403867.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:47.831Z,1516403867.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:48.208Z,1516403868.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:48.222Z,1516403868.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:48.583Z,1516403868.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:48.611Z,1516403868.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:48.979Z,1516403868.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:49.014Z,1516403869.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:49.380Z,1516403869.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:49.418Z,1516403869.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:49.786Z,1516403869.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:49.812Z,1516403869.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:50.190Z,1516403870.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:50.216Z,1516403870.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:50.608Z,1516403870.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:50.623Z,1516403870.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:50.994Z,1516403870.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:51.028Z,1516403871.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:51.391Z,1516403871.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:51.422Z,1516403871.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:51.791Z,1516403871.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:51.820Z,1516403871.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:52.187Z,1516403872.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:52.220Z,1516403872.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:52.596Z,1516403872.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:52.620Z,1516403872.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:52.988Z,1516403872.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:53.019Z,1516403873.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:53.402Z,1516403873.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:53.428Z,1516403873.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:53.798Z,1516403873.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:53.824Z,1516403873.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:54.195Z,1516403874.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:54.227Z,1516403874.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:54.592Z,1516403874.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:54.626Z,1516403874.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:54.982Z,1516403874.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:55.002Z,1516403875.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:55.393Z,1516403875.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:55.407Z,1516403875.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:55.791Z,1516403875.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:55.811Z,1516403875.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:56.203Z,1516403876.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:56.235Z,1516403876.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:56.598Z,1516403876.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:56.632Z,1516403876.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:57.002Z,1516403877.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:57.032Z,1516403877.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:57.391Z,1516403877.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:57.405Z,1516403877.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:57.791Z,1516403877.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:57.811Z,1516403877.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:58.191Z,1516403878.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:58.211Z,1516403878.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:58.592Z,1516403878.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:58.606Z,1516403878.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:59.046Z,1516403879.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:59.170Z,1516403879.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:59.402Z,1516403879.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:59.432Z,1516403879.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:17:59.806Z,1516403879.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:17:59.838Z,1516403879.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:00.194Z,1516403880.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:00.208Z,1516403880.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:00.593Z,1516403880.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:00.607Z,1516403880.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:00.988Z,1516403880.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:01.002Z,1516403881.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:01.393Z,1516403881.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:01.407Z,1516403881.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:01.793Z,1516403881.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:01.807Z,1516403881.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:02.206Z,1516403882.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:02.240Z,1516403882.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:02.594Z,1516403882.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:02.608Z,1516403882.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:03.006Z,1516403883.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:03.036Z,1516403883.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:03.388Z,1516403883.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:03.402Z,1516403883.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:03.793Z,1516403883.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:03.807Z,1516403883.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:04.189Z,1516403884.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:04.208Z,1516403884.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:04.589Z,1516403884.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:04.603Z,1516403884.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:05.003Z,1516403885.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:05.037Z,1516403885.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:05.406Z,1516403885.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:05.436Z,1516403885.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:05.798Z,1516403885.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:05.812Z,1516403885.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:06.206Z,1516403886.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:06.235Z,1516403886.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:06.593Z,1516403886.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:06.607Z,1516403886.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:06.993Z,1516403886.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:07.006Z,1516403887.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:07.393Z,1516403887.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:07.407Z,1516403887.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:07.793Z,1516403887.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:07.807Z,1516403887.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:08.206Z,1516403888.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:08.237Z,1516403888.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:08.598Z,1516403888.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:08.612Z,1516403888.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:09.006Z,1516403889.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:09.036Z,1516403889.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:09.389Z,1516403889.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:09.403Z,1516403889.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:09.793Z,1516403889.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:09.807Z,1516403889.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:10.194Z,1516403890.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:10.208Z,1516403890.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:10.606Z,1516403890.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:10.638Z,1516403890.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:10.994Z,1516403890.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:11.008Z,1516403891.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:11.394Z,1516403891.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:11.408Z,1516403891.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:11.793Z,1516403891.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:11.806Z,1516403891.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:12.198Z,1516403892.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:12.212Z,1516403892.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:12.606Z,1516403892.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:12.636Z,1516403892.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:13.006Z,1516403893.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:13.038Z,1516403893.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:13.394Z,1516403893.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:13.408Z,1516403893.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:13.793Z,1516403893.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:13.807Z,1516403893.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:14.206Z,1516403894.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:14.237Z,1516403894.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:14.598Z,1516403894.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:14.612Z,1516403894.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:14.998Z,1516403894.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:15.012Z,1516403895.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:15.393Z,1516403895.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:15.407Z,1516403895.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:15.793Z,1516403895.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:15.807Z,1516403895.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:16.206Z,1516403896.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:16.235Z,1516403896.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:16.606Z,1516403896.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:16.638Z,1516403896.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:17.006Z,1516403897.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:17.034Z,1516403897.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:17.401Z,1516403897.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:17.441Z,1516403897.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:17.788Z,1516403897.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:17.806Z,1516403897.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:18.198Z,1516403898.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:18.213Z,1516403898.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:18.602Z,1516403898.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:18.616Z,1516403898.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:18.998Z,1516403898.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:19.018Z,1516403899.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:19.394Z,1516403899.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:19.409Z,1516403899.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:19.796Z,1516403899.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:19.810Z,1516403899.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:20.198Z,1516403900.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:20.212Z,1516403900.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:20.602Z,1516403900.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:20.616Z,1516403900.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:20.998Z,1516403900.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:21.012Z,1516403901.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:21.397Z,1516403901.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:21.411Z,1516403901.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:21.794Z,1516403901.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:21.808Z,1516403901.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:22.198Z,1516403902.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:22.219Z,1516403902.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:22.601Z,1516403902.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:22.615Z,1516403902.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:22.998Z,1516403902.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:23.012Z,1516403903.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:23.397Z,1516403903.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:23.411Z,1516403903.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:23.794Z,1516403903.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:23.808Z,1516403903.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:24.202Z,1516403904.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:24.217Z,1516403904.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:24.602Z,1516403904.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:24.616Z,1516403904.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:24.999Z,1516403904.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:25.018Z,1516403905.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:25.391Z,1516403905.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:25.405Z,1516403905.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:25.791Z,1516403905.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:25.807Z,1516403905.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:26.199Z,1516403906.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:26.218Z,1516403906.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:26.597Z,1516403906.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:26.612Z,1516403906.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:26.997Z,1516403906.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:27.012Z,1516403907.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:27.393Z,1516403907.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:27.407Z,1516403907.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:27.795Z,1516403907.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:27.810Z,1516403907.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:28.197Z,1516403908.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:28.212Z,1516403908.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:28.598Z,1516403908.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:28.612Z,1516403908.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:28.994Z,1516403908.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:29.016Z,1516403909.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:29.397Z,1516403909.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:29.411Z,1516403909.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:29.796Z,1516403909.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:29.810Z,1516403909.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:30.202Z,1516403910.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:30.216Z,1516403910.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:30.602Z,1516403910.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:30.616Z,1516403910.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:31.002Z,1516403911.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:31.016Z,1516403911.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:34.236Z,1516403914.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:34.250Z,1516403914.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:34.351Z,1516403914.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:34.392Z,1516403914.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:34.718Z,1516403914.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:34.748Z,1516403914.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:35.122Z,1516403915.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:35.154Z,1516403915.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:35.515Z,1516403915.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:35.529Z,1516403915.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:35.910Z,1516403915.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:35.924Z,1516403915.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:36.305Z,1516403916.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:36.320Z,1516403916.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:36.702Z,1516403916.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:36.731Z,1516403916.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:37.107Z,1516403917.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:37.127Z,1516403917.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:37.514Z,1516403917.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:37.529Z,1516403917.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:37.912Z,1516403917.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:37.927Z,1516403917.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:38.312Z,1516403918.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:38.327Z,1516403918.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:38.704Z,1516403918.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:38.718Z,1516403918.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:39.103Z,1516403919.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:39.117Z,1516403919.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:39.503Z,1516403919.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:39.522Z,1516403919.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:39.895Z,1516403919.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:39.928Z,1516403919.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:40.314Z,1516403920.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:40.329Z,1516403920.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:40.721Z,1516403920.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:40.735Z,1516403920.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:41.122Z,1516403921.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:41.136Z,1516403921.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:41.502Z,1516403921.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:41.525Z,1516403921.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:41.902Z,1516403921.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:41.924Z,1516403921.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:42.308Z,1516403922.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:42.322Z,1516403922.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:42.709Z,1516403922.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:42.723Z,1516403922.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:43.103Z,1516403923.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:43.125Z,1516403923.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:43.515Z,1516403923.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:43.530Z,1516403923.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:43.915Z,1516403923.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:43.937Z,1516403923.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:44.322Z,1516403924.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:44.336Z,1516403924.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:44.713Z,1516403924.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:44.727Z,1516403924.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:45.111Z,1516403925.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:45.131Z,1516403925.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:45.500Z,1516403925.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:45.535Z,1516403925.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:45.912Z,1516403925.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:45.926Z,1516403925.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:46.322Z,1516403926.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:46.343Z,1516403926.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:46.721Z,1516403926.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:46.743Z,1516403926.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:47.123Z,1516403927.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:47.137Z,1516403927.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:47.511Z,1516403927.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:47.531Z,1516403927.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:47.898Z,1516403927.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:47.930Z,1516403927.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:48.312Z,1516403928.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:48.326Z,1516403928.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:48.727Z,1516403928.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:48.746Z,1516403928.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:49.142Z,1516403929.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:49.189Z,1516403929.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:49.512Z,1516403929.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:49.560Z,1516403929.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:49.920Z,1516403929.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:49.947Z,1516403929.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:50.320Z,1516403930.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:50.356Z,1516403930.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:50.708Z,1516403930.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:50.750Z,1516403930.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:51.110Z,1516403931.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:51.141Z,1516403931.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:51.519Z,1516403931.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:51.542Z,1516403931.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:51.912Z,1516403931.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:51.938Z,1516403931.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:52.320Z,1516403932.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:52.375Z,1516403932.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:52.723Z,1516403932.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:52.751Z,1516403932.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:53.120Z,1516403933.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:53.135Z,1516403933.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:53.135Z,1516403933.135 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-01-19T23:18:53.135Z,1516403933.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:18:53.141Z,1516403933.141 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:53.142Z,1516403933.142 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-01-19T23:18:53.142Z,1516403933.142 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:18:53.144Z,1516403933.144 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:53.144Z,1516403933.144 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2018-01-19T23:18:53.144Z,1516403933.144 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:18:53.223Z,1516403933.223 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:18:53.223Z,1516403933.223 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:18:53.223Z,1516403933.223 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:18:53.501Z,1516403933.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:53.577Z,1516403933.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:18:53.577Z,1516403933.577 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-01-19T23:18:53.578Z,1516403933.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:18:53.578Z,1516403933.578 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-01-19T23:18:53.578Z,1516403933.578 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:18:53.578Z,1516403933.578 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2018-01-19T23:18:53.920Z,1516403933.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:53.959Z,1516403933.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:18:53.959Z,1516403933.959 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:18:53.960Z,1516403933.960 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:18:53.960Z,1516403933.960 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:18:53.960Z,1516403933.960 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:18:53.969Z,1516403933.969 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:18:53.970Z,1516403933.970 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:18:53.970Z,1516403933.970 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:18:53.971Z,1516403933.971 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:18:54.310Z,1516403934.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:54.339Z,1516403934.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:18:54.339Z,1516403934.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:54.702Z,1516403934.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:54.731Z,1516403934.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:18:54.732Z,1516403934.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:55.110Z,1516403935.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:55.154Z,1516403935.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:18:55.155Z,1516403935.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:55.520Z,1516403935.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:55.574Z,1516403935.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:18:55.575Z,1516403935.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:55.924Z,1516403935.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:55.953Z,1516403935.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:18:55.954Z,1516403935.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:56.312Z,1516403936.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:56.334Z,1516403936.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:18:56.335Z,1516403936.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:56.712Z,1516403936.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:56.737Z,1516403936.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:18:56.738Z,1516403936.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:57.110Z,1516403937.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:57.124Z,1516403937.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:18:57.129Z,1516403937.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:57.502Z,1516403937.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:57.527Z,1516403937.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:18:57.527Z,1516403937.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:57.901Z,1516403937.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:57.970Z,1516403937.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:18:57.971Z,1516403937.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:58.352Z,1516403938.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:58.374Z,1516403938.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:18:58.374Z,1516403938.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:58.719Z,1516403938.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:58.745Z,1516403938.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:18:58.746Z,1516403938.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:59.123Z,1516403939.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:59.137Z,1516403939.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:18:59.138Z,1516403939.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:59.503Z,1516403939.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:59.534Z,1516403939.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:18:59.534Z,1516403939.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:18:59.899Z,1516403939.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:18:59.934Z,1516403939.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:18:59.935Z,1516403939.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:00.299Z,1516403940.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:00.312Z,1516403940.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:19:00.337Z,1516403940.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:00.704Z,1516403940.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:00.734Z,1516403940.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:19:00.734Z,1516403940.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:01.103Z,1516403941.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:01.133Z,1516403941.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:19:01.134Z,1516403941.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:01.510Z,1516403941.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:01.536Z,1516403941.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:19:01.537Z,1516403941.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:01.923Z,1516403941.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:01.936Z,1516403941.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:19:01.937Z,1516403941.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:02.310Z,1516403942.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:02.342Z,1516403942.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:19:02.343Z,1516403942.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:02.695Z,1516403942.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:02.738Z,1516403942.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:19:02.739Z,1516403942.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:03.103Z,1516403943.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:03.133Z,1516403943.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:19:03.134Z,1516403943.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:03.500Z,1516403943.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:03.526Z,1516403943.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:19:03.527Z,1516403943.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:03.903Z,1516403943.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:03.916Z,1516403943.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:19:03.945Z,1516403943.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:04.314Z,1516403944.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:04.339Z,1516403944.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:19:04.340Z,1516403944.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:04.714Z,1516403944.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:04.747Z,1516403944.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:19:04.754Z,1516403944.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:05.114Z,1516403945.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:05.139Z,1516403945.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:19:05.140Z,1516403945.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:05.503Z,1516403945.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:05.537Z,1516403945.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:19:05.538Z,1516403945.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:05.899Z,1516403945.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:05.934Z,1516403945.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:19:05.935Z,1516403945.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:06.303Z,1516403946.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:06.316Z,1516403946.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:19:06.317Z,1516403946.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:06.704Z,1516403946.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:06.718Z,1516403946.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:19:06.719Z,1516403946.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:07.107Z,1516403947.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:07.142Z,1516403947.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:19:07.143Z,1516403947.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:07.521Z,1516403947.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:07.549Z,1516403947.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:19:07.550Z,1516403947.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:07.914Z,1516403947.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:07.928Z,1516403947.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:19:07.928Z,1516403947.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:08.322Z,1516403948.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:08.352Z,1516403948.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:19:08.357Z,1516403948.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:08.709Z,1516403948.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:08.722Z,1516403948.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:19:08.723Z,1516403948.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:09.109Z,1516403949.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:09.123Z,1516403949.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:19:09.124Z,1516403949.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:09.516Z,1516403949.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:09.530Z,1516403949.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:19:09.530Z,1516403949.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:09.912Z,1516403949.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:09.925Z,1516403949.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:19:09.926Z,1516403949.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:10.313Z,1516403950.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:10.334Z,1516403950.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:19:10.335Z,1516403950.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:10.718Z,1516403950.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:10.732Z,1516403950.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:19:10.732Z,1516403950.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:11.114Z,1516403951.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:11.134Z,1516403951.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:19:11.135Z,1516403951.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:11.510Z,1516403951.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:11.524Z,1516403951.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:19:11.524Z,1516403951.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:11.915Z,1516403951.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:12.002Z,1516403952.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-19T23:19:12.003Z,1516403952.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:12.309Z,1516403952.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:12.323Z,1516403952.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T23:19:12.324Z,1516403952.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:12.713Z,1516403952.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:12.730Z,1516403952.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:19:12.731Z,1516403952.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:12.769Z,1516403952.769 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T23:19:13.112Z,1516403953.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:13.126Z,1516403953.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T23:19:13.126Z,1516403953.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:13.515Z,1516403953.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:13.529Z,1516403953.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:13.914Z,1516403953.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:13.928Z,1516403953.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:14.313Z,1516403954.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:14.327Z,1516403954.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:14.717Z,1516403954.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:14.766Z,1516403954.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:15.105Z,1516403955.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:15.123Z,1516403955.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:15.510Z,1516403955.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:15.531Z,1516403955.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:15.910Z,1516403955.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:15.924Z,1516403955.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:16.309Z,1516403956.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:16.327Z,1516403956.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:16.723Z,1516403956.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:16.755Z,1516403956.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:17.110Z,1516403957.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:17.131Z,1516403957.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:17.509Z,1516403957.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:17.524Z,1516403957.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:17.905Z,1516403957.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:17.924Z,1516403957.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:18.310Z,1516403958.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:18.324Z,1516403958.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:18.710Z,1516403958.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:18.724Z,1516403958.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:19.122Z,1516403959.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:19.157Z,1516403959.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:19.512Z,1516403959.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:19.526Z,1516403959.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:19.904Z,1516403959.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:19.922Z,1516403959.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:20.302Z,1516403960.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:20.335Z,1516403960.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:20.713Z,1516403960.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:20.727Z,1516403960.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:21.104Z,1516403961.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:21.122Z,1516403961.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:21.517Z,1516403961.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:21.531Z,1516403961.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:21.918Z,1516403961.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:21.931Z,1516403961.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:22.313Z,1516403962.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:22.339Z,1516403962.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:22.712Z,1516403962.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:22.727Z,1516403962.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:23.109Z,1516403963.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:23.127Z,1516403963.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:23.513Z,1516403963.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:23.528Z,1516403963.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:23.906Z,1516403963.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:23.926Z,1516403963.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:24.318Z,1516403964.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:24.332Z,1516403964.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:24.719Z,1516403964.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:24.733Z,1516403964.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:25.117Z,1516403965.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:25.139Z,1516403965.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:25.513Z,1516403965.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:25.527Z,1516403965.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:25.897Z,1516403965.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:25.924Z,1516403965.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:26.321Z,1516403966.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:26.336Z,1516403966.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:26.721Z,1516403966.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:26.735Z,1516403966.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:27.110Z,1516403967.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:27.130Z,1516403967.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:27.500Z,1516403967.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:27.525Z,1516403967.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:27.895Z,1516403967.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:27.929Z,1516403967.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:28.312Z,1516403968.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:28.338Z,1516403968.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:28.727Z,1516403968.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:28.741Z,1516403968.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:29.106Z,1516403969.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:29.132Z,1516403969.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:29.504Z,1516403969.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:29.529Z,1516403969.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:29.899Z,1516403969.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:29.930Z,1516403969.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:30.323Z,1516403970.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:30.337Z,1516403970.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:30.726Z,1516403970.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:30.747Z,1516403970.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:31.119Z,1516403971.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:31.133Z,1516403971.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:34.194Z,1516403974.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:34.208Z,1516403974.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:34.306Z,1516403974.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:34.347Z,1516403974.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:34.698Z,1516403974.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:34.727Z,1516403974.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:35.106Z,1516403975.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:35.128Z,1516403975.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:35.490Z,1516403975.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:35.504Z,1516403975.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:35.888Z,1516403975.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:35.902Z,1516403975.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:36.279Z,1516403976.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:36.313Z,1516403976.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:36.692Z,1516403976.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:36.706Z,1516403976.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:37.095Z,1516403977.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:37.109Z,1516403977.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:37.498Z,1516403977.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:37.512Z,1516403977.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:37.904Z,1516403977.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:37.923Z,1516403977.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:38.301Z,1516403978.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:38.315Z,1516403978.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:38.679Z,1516403978.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:38.705Z,1516403978.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:39.077Z,1516403979.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:39.103Z,1516403979.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:39.481Z,1516403979.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:39.507Z,1516403979.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:39.879Z,1516403979.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:39.905Z,1516403979.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:40.298Z,1516403980.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:40.312Z,1516403980.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:40.708Z,1516403980.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:40.727Z,1516403980.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:41.103Z,1516403981.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:41.116Z,1516403981.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:41.477Z,1516403981.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:41.510Z,1516403981.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:41.880Z,1516403981.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:41.905Z,1516403981.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:42.275Z,1516403982.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:42.307Z,1516403982.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:42.701Z,1516403982.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:42.715Z,1516403982.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:43.102Z,1516403983.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:43.116Z,1516403983.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:43.502Z,1516403983.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:43.516Z,1516403983.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:43.875Z,1516403983.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:43.910Z,1516403983.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:44.279Z,1516403984.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:44.304Z,1516403984.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:44.676Z,1516403984.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:44.707Z,1516403984.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:45.077Z,1516403985.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:45.099Z,1516403985.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:45.498Z,1516403985.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:45.512Z,1516403985.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:45.899Z,1516403985.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:45.913Z,1516403985.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:46.286Z,1516403986.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:46.318Z,1516403986.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:46.679Z,1516403986.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:46.710Z,1516403986.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:47.075Z,1516403987.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:47.111Z,1516403987.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:47.473Z,1516403987.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:47.487Z,1516403987.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:47.880Z,1516403987.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:47.910Z,1516403987.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:48.283Z,1516403988.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:48.322Z,1516403988.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:48.690Z,1516403988.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:48.715Z,1516403988.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:49.094Z,1516403989.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:49.119Z,1516403989.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:49.490Z,1516403989.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:49.522Z,1516403989.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:49.874Z,1516403989.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:49.888Z,1516403989.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:50.285Z,1516403990.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:50.312Z,1516403990.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:50.685Z,1516403990.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:50.698Z,1516403990.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:51.082Z,1516403991.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:51.096Z,1516403991.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:51.499Z,1516403991.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:51.523Z,1516403991.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:51.898Z,1516403991.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:51.923Z,1516403991.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:52.295Z,1516403992.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:52.329Z,1516403992.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:52.688Z,1516403992.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:52.703Z,1516403992.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:53.089Z,1516403993.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:53.103Z,1516403993.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:53.482Z,1516403993.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:53.496Z,1516403993.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:53.890Z,1516403993.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:53.904Z,1516403993.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:54.288Z,1516403994.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:54.303Z,1516403994.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:54.690Z,1516403994.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:54.706Z,1516403994.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:55.102Z,1516403995.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:55.124Z,1516403995.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:55.494Z,1516403995.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:55.525Z,1516403995.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:55.876Z,1516403995.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:55.903Z,1516403995.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:56.289Z,1516403996.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:56.303Z,1516403996.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:56.684Z,1516403996.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:56.702Z,1516403996.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:57.080Z,1516403997.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:57.098Z,1516403997.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:57.498Z,1516403997.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:57.524Z,1516403997.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:57.898Z,1516403997.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:57.912Z,1516403997.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:58.286Z,1516403998.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:58.307Z,1516403998.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:58.689Z,1516403998.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:58.703Z,1516403998.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:59.086Z,1516403999.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:59.099Z,1516403999.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:59.484Z,1516403999.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:59.498Z,1516403999.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:19:59.890Z,1516403999.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:19:59.904Z,1516403999.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:00.289Z,1516404000.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:00.303Z,1516404000.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:00.699Z,1516404000.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:00.730Z,1516404000.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:01.099Z,1516404001.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:01.121Z,1516404001.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:01.490Z,1516404001.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:01.504Z,1516404001.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:01.885Z,1516404001.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:01.900Z,1516404001.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:02.284Z,1516404002.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:02.312Z,1516404002.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:02.684Z,1516404002.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:02.711Z,1516404002.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:03.084Z,1516404003.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:03.103Z,1516404003.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:03.494Z,1516404003.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:03.510Z,1516404003.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:03.893Z,1516404003.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:03.915Z,1516404003.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:04.292Z,1516404004.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:04.307Z,1516404004.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:04.686Z,1516404004.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:04.701Z,1516404004.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:05.082Z,1516404005.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:05.107Z,1516404005.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:05.484Z,1516404005.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:05.502Z,1516404005.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:05.882Z,1516404005.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:05.911Z,1516404005.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:06.284Z,1516404006.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:06.297Z,1516404006.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:06.694Z,1516404006.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:06.709Z,1516404006.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:07.094Z,1516404007.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:07.108Z,1516404007.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:07.495Z,1516404007.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:07.509Z,1516404007.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:07.891Z,1516404007.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:07.911Z,1516404007.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:08.287Z,1516404008.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:08.301Z,1516404008.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:08.693Z,1516404008.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:08.707Z,1516404008.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:09.085Z,1516404009.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:09.099Z,1516404009.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:09.495Z,1516404009.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:09.521Z,1516404009.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:09.901Z,1516404009.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:09.915Z,1516404009.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:10.298Z,1516404010.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:10.312Z,1516404010.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:10.682Z,1516404010.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:10.704Z,1516404010.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:11.074Z,1516404011.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:11.107Z,1516404011.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:11.473Z,1516404011.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:11.507Z,1516404011.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:11.896Z,1516404011.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:11.910Z,1516404011.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:12.292Z,1516404012.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:12.310Z,1516404012.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:12.698Z,1516404012.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:12.719Z,1516404012.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:13.100Z,1516404013.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:13.119Z,1516404013.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:13.502Z,1516404013.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:13.522Z,1516404013.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:13.877Z,1516404013.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:13.911Z,1516404013.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:14.283Z,1516404014.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:14.315Z,1516404014.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:14.680Z,1516404014.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:14.711Z,1516404014.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:15.077Z,1516404015.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:15.099Z,1516404015.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:15.502Z,1516404015.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:15.516Z,1516404015.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:15.904Z,1516404015.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:15.918Z,1516404015.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:16.290Z,1516404016.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:16.322Z,1516404016.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:16.679Z,1516404016.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:16.714Z,1516404016.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:17.083Z,1516404017.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:17.119Z,1516404017.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:17.477Z,1516404017.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:17.491Z,1516404017.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:17.884Z,1516404017.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:17.914Z,1516404017.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:18.280Z,1516404018.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:18.299Z,1516404018.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:18.694Z,1516404018.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:18.729Z,1516404018.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:19.098Z,1516404019.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:19.128Z,1516404019.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:19.499Z,1516404019.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:19.529Z,1516404019.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:19.883Z,1516404019.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:19.903Z,1516404019.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:20.288Z,1516404020.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:20.303Z,1516404020.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:20.690Z,1516404020.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:20.704Z,1516404020.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:21.083Z,1516404021.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:21.103Z,1516404021.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:21.502Z,1516404021.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:21.516Z,1516404021.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:21.898Z,1516404021.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:21.912Z,1516404021.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:22.294Z,1516404022.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:22.309Z,1516404022.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:22.687Z,1516404022.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:22.701Z,1516404022.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:23.088Z,1516404023.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:23.103Z,1516404023.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:23.490Z,1516404023.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:23.504Z,1516404023.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:23.891Z,1516404023.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:23.911Z,1516404023.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:24.288Z,1516404024.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:24.303Z,1516404024.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:24.694Z,1516404024.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:24.709Z,1516404024.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:25.094Z,1516404025.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:25.108Z,1516404025.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:25.495Z,1516404025.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:25.509Z,1516404025.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:25.883Z,1516404025.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:25.903Z,1516404025.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:26.288Z,1516404026.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:26.302Z,1516404026.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:26.687Z,1516404026.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:26.713Z,1516404026.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:27.092Z,1516404027.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:27.111Z,1516404027.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:27.498Z,1516404027.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:27.512Z,1516404027.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:27.898Z,1516404027.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:27.919Z,1516404027.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:28.298Z,1516404028.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:28.312Z,1516404028.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:28.688Z,1516404028.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:28.703Z,1516404028.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:29.094Z,1516404029.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:29.108Z,1516404029.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:29.480Z,1516404029.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:29.512Z,1516404029.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:29.894Z,1516404029.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:29.908Z,1516404029.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:30.283Z,1516404030.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:30.309Z,1516404030.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:30.702Z,1516404030.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:30.723Z,1516404030.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:31.102Z,1516404031.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:31.116Z,1516404031.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:31.504Z,1516404031.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:31.518Z,1516404031.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:34.572Z,1516404034.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:34.596Z,1516404034.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:34.699Z,1516404034.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:34.746Z,1516404034.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:35.054Z,1516404035.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:35.068Z,1516404035.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:35.466Z,1516404035.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:35.498Z,1516404035.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:35.855Z,1516404035.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:35.869Z,1516404035.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:36.253Z,1516404036.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:36.275Z,1516404036.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:36.654Z,1516404036.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:36.667Z,1516404036.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:37.042Z,1516404037.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:37.063Z,1516404037.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:37.454Z,1516404037.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:37.470Z,1516404037.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:37.867Z,1516404037.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:37.880Z,1516404037.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:38.251Z,1516404038.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:38.272Z,1516404038.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:38.649Z,1516404038.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:38.667Z,1516404038.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:39.048Z,1516404039.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:39.062Z,1516404039.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:39.449Z,1516404039.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:39.463Z,1516404039.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:39.853Z,1516404039.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:39.867Z,1516404039.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:40.252Z,1516404040.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:40.266Z,1516404040.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:40.666Z,1516404040.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:40.680Z,1516404040.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:41.062Z,1516404041.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:41.076Z,1516404041.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:41.458Z,1516404041.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:41.478Z,1516404041.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:41.849Z,1516404041.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:41.863Z,1516404041.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:42.251Z,1516404042.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:42.271Z,1516404042.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:42.656Z,1516404042.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:42.669Z,1516404042.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:43.049Z,1516404043.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:43.063Z,1516404043.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:43.456Z,1516404043.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:43.475Z,1516404043.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:43.865Z,1516404043.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:43.879Z,1516404043.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:44.261Z,1516404044.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:44.275Z,1516404044.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:44.646Z,1516404044.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:44.668Z,1516404044.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:45.052Z,1516404045.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:45.070Z,1516404045.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:45.437Z,1516404045.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:45.470Z,1516404045.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:45.856Z,1516404045.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:45.870Z,1516404045.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:46.256Z,1516404046.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:46.269Z,1516404046.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:46.665Z,1516404046.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:46.687Z,1516404046.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:47.064Z,1516404047.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:47.083Z,1516404047.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:47.466Z,1516404047.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:47.479Z,1516404047.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:47.855Z,1516404047.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:47.875Z,1516404047.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:48.255Z,1516404048.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:48.275Z,1516404048.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:48.657Z,1516404048.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:48.671Z,1516404048.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:49.039Z,1516404049.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:49.064Z,1516404049.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:49.461Z,1516404049.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:49.475Z,1516404049.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:49.865Z,1516404049.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:49.886Z,1516404049.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:50.258Z,1516404050.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:50.272Z,1516404050.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:50.656Z,1516404050.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:50.670Z,1516404050.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:51.046Z,1516404051.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:51.083Z,1516404051.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:51.454Z,1516404051.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:51.481Z,1516404051.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:51.868Z,1516404051.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:51.887Z,1516404051.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:52.266Z,1516404052.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:52.286Z,1516404052.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:52.656Z,1516404052.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:52.670Z,1516404052.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:53.043Z,1516404053.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:53.074Z,1516404053.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:53.426Z,1516404053.426 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T23:20:53.426Z,1516404053.426 [NAL9602] Data Fault, FailCount= 2
2018-01-19T23:20:53.427Z,1516404053.427 [NAL9602](ERROR): Data Fault
2018-01-19T23:20:53.444Z,1516404053.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:53.487Z,1516404053.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:53.516Z,1516404053.516 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T23:20:53.830Z,1516404053.830 [NAL9602](INFO): Powering down
2018-01-19T23:20:53.848Z,1516404053.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:53.879Z,1516404053.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:54.246Z,1516404054.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:54.271Z,1516404054.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:54.641Z,1516404054.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:54.671Z,1516404054.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:54.684Z,1516404054.684 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T23:20:54.684Z,1516404054.684 [NAL9602] No Fault, FailCount= 2
2018-01-19T23:20:55.040Z,1516404055.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:55.074Z,1516404055.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:55.443Z,1516404055.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:55.471Z,1516404055.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:55.862Z,1516404055.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:55.881Z,1516404055.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:56.247Z,1516404056.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:56.272Z,1516404056.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:56.643Z,1516404056.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:56.673Z,1516404056.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:57.047Z,1516404057.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:57.082Z,1516404057.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:57.444Z,1516404057.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:57.458Z,1516404057.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:57.846Z,1516404057.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:57.860Z,1516404057.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:58.244Z,1516404058.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:58.263Z,1516404058.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:58.647Z,1516404058.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:58.661Z,1516404058.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:59.046Z,1516404059.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:59.060Z,1516404059.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:59.444Z,1516404059.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:59.463Z,1516404059.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:20:59.851Z,1516404059.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:20:59.865Z,1516404059.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:00.250Z,1516404060.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:00.264Z,1516404060.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:00.644Z,1516404060.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:00.659Z,1516404060.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:01.051Z,1516404061.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:01.078Z,1516404061.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:01.454Z,1516404061.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:01.467Z,1516404061.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:01.854Z,1516404061.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:01.868Z,1516404061.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:02.258Z,1516404062.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:02.272Z,1516404062.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:02.651Z,1516404062.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:02.665Z,1516404062.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:03.049Z,1516404063.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:03.067Z,1516404063.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:03.455Z,1516404063.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:03.470Z,1516404063.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:03.859Z,1516404063.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:03.872Z,1516404063.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:04.256Z,1516404064.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:04.270Z,1516404064.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:04.653Z,1516404064.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:04.667Z,1516404064.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:05.057Z,1516404065.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:05.074Z,1516404065.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:05.446Z,1516404065.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:05.466Z,1516404065.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:05.851Z,1516404065.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:05.870Z,1516404065.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:06.252Z,1516404066.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:06.266Z,1516404066.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:06.657Z,1516404066.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:06.671Z,1516404066.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:07.051Z,1516404067.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:07.066Z,1516404067.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:07.450Z,1516404067.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:07.466Z,1516404067.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:07.855Z,1516404067.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:07.870Z,1516404067.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:08.246Z,1516404068.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:08.266Z,1516404068.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:08.658Z,1516404068.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:08.672Z,1516404068.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:09.036Z,1516404069.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:09.071Z,1516404069.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:09.455Z,1516404069.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:09.469Z,1516404069.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:09.852Z,1516404069.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:09.870Z,1516404069.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:10.255Z,1516404070.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:10.268Z,1516404070.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:10.651Z,1516404070.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:10.665Z,1516404070.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:11.051Z,1516404071.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:11.065Z,1516404071.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:11.451Z,1516404071.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:11.465Z,1516404071.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:11.855Z,1516404071.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:11.870Z,1516404071.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:12.258Z,1516404072.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:12.272Z,1516404072.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:12.655Z,1516404072.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:12.668Z,1516404072.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:13.057Z,1516404073.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:13.071Z,1516404073.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:13.456Z,1516404073.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:13.474Z,1516404073.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:13.856Z,1516404073.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:13.870Z,1516404073.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:14.256Z,1516404074.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:14.270Z,1516404074.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:14.661Z,1516404074.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:14.675Z,1516404074.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:15.050Z,1516404075.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:15.065Z,1516404075.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:15.455Z,1516404075.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:15.470Z,1516404075.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:15.851Z,1516404075.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:15.866Z,1516404075.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:16.250Z,1516404076.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:16.264Z,1516404076.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:16.649Z,1516404076.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:16.669Z,1516404076.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:17.050Z,1516404077.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:17.064Z,1516404077.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:17.440Z,1516404077.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:17.474Z,1516404077.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:17.857Z,1516404077.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:17.871Z,1516404077.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:18.253Z,1516404078.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:18.267Z,1516404078.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:18.655Z,1516404078.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:18.668Z,1516404078.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:19.051Z,1516404079.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:19.065Z,1516404079.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:19.453Z,1516404079.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:19.474Z,1516404079.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:19.856Z,1516404079.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:19.870Z,1516404079.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:20.255Z,1516404080.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:20.269Z,1516404080.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:20.658Z,1516404080.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:20.672Z,1516404080.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:21.053Z,1516404081.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:21.067Z,1516404081.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:21.457Z,1516404081.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:21.471Z,1516404081.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:21.852Z,1516404081.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:21.871Z,1516404081.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:22.240Z,1516404082.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:22.266Z,1516404082.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:22.658Z,1516404082.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:22.672Z,1516404082.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:23.061Z,1516404083.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:23.074Z,1516404083.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:23.451Z,1516404083.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:23.465Z,1516404083.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:23.855Z,1516404083.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:23.869Z,1516404083.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:24.226Z,1516404084.226 [NAL9602](INFO): Powering up NAL9602
2018-01-19T23:21:24.256Z,1516404084.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:24.283Z,1516404084.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:24.657Z,1516404084.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:24.671Z,1516404084.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:25.041Z,1516404085.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:25.066Z,1516404085.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:25.443Z,1516404085.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:25.467Z,1516404085.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:25.858Z,1516404085.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:25.872Z,1516404085.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:26.256Z,1516404086.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:26.271Z,1516404086.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:26.654Z,1516404086.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:26.674Z,1516404086.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:27.040Z,1516404087.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:27.065Z,1516404087.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:27.443Z,1516404087.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:27.484Z,1516404087.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:27.843Z,1516404087.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:27.869Z,1516404087.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:28.257Z,1516404088.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:28.271Z,1516404088.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:28.654Z,1516404088.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:28.668Z,1516404088.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:29.043Z,1516404089.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:29.079Z,1516404089.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:29.440Z,1516404089.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:29.474Z,1516404089.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:29.856Z,1516404089.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:29.875Z,1516404089.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:29.878Z,1516404089.878 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T23:16:29.9Z
2018-01-19T23:21:29.878Z,1516404089.878 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T23:21:29.878Z,1516404089.878 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T23:21:30.254Z,1516404090.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:30.268Z,1516404090.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:30.695Z,1516404090.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:30.717Z,1516404090.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:31.057Z,1516404091.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:31.071Z,1516404091.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:34.189Z,1516404094.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:34.215Z,1516404094.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:34.293Z,1516404094.293 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0052.lzma
2018-01-19T23:21:34.322Z,1516404094.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:34.336Z,1516404094.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:34.686Z,1516404094.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:34.715Z,1516404094.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:35.043Z,1516404095.043 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0052.lzma.bak
2018-01-19T23:21:35.043Z,1516404095.043 [DataOverHttps](INFO): SBD MOMSN=7724848
2018-01-19T23:21:35.058Z,1516404095.058 [NAL9602](INFO): NAL9602 initialized
2018-01-19T23:21:35.089Z,1516404095.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:35.116Z,1516404095.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:35.563Z,1516404095.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:35.577Z,1516404095.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:35.878Z,1516404095.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:35.892Z,1516404095.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:39.004Z,1516404099.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:39.018Z,1516404099.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:39.134Z,1516404099.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:39.169Z,1516404099.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:39.475Z,1516404099.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:39.495Z,1516404099.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:39.875Z,1516404099.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:39.888Z,1516404099.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:40.271Z,1516404100.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:40.287Z,1516404100.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:40.676Z,1516404100.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:40.690Z,1516404100.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:43.771Z,1516404103.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:43.785Z,1516404103.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:43.867Z,1516404103.867 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180119T210901/Express0053.lzma
2018-01-19T23:21:43.906Z,1516404103.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:43.937Z,1516404103.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:44.236Z,1516404104.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:44.279Z,1516404104.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:44.612Z,1516404104.612 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0053.lzma.bak
2018-01-19T23:21:44.612Z,1516404104.612 [DataOverHttps](INFO): SBD MOMSN=7724850
2018-01-19T23:21:44.660Z,1516404104.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:44.674Z,1516404104.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:45.131Z,1516404105.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:45.145Z,1516404105.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:45.148Z,1516404105.148 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T23:21:45.148Z,1516404105.148 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T23:21:45.148Z,1516404105.148 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T23:21:45.442Z,1516404105.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:45.480Z,1516404105.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:48.543Z,1516404108.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:48.580Z,1516404108.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:48.675Z,1516404108.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:48.691Z,1516404108.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:49.046Z,1516404109.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:49.081Z,1516404109.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:49.432Z,1516404109.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:49.446Z,1516404109.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:49.838Z,1516404109.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:49.852Z,1516404109.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:50.237Z,1516404110.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:50.251Z,1516404110.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:50.637Z,1516404110.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:50.651Z,1516404110.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:51.037Z,1516404111.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:51.052Z,1516404111.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:51.451Z,1516404111.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:51.488Z,1516404111.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:51.848Z,1516404111.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:51.862Z,1516404111.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:52.239Z,1516404112.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:52.259Z,1516404112.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:52.634Z,1516404112.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:52.661Z,1516404112.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:53.032Z,1516404113.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:53.059Z,1516404113.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:53.425Z,1516404113.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:53.447Z,1516404113.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:53.846Z,1516404113.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:53.861Z,1516404113.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:54.247Z,1516404114.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:54.264Z,1516404114.264 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:54.264Z,1516404114.264 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-01-19T23:21:54.264Z,1516404114.264 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:21:54.267Z,1516404114.267 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:54.268Z,1516404114.268 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-01-19T23:21:54.268Z,1516404114.268 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:21:54.270Z,1516404114.270 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:54.270Z,1516404114.270 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2018-01-19T23:21:54.270Z,1516404114.270 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:21:54.282Z,1516404114.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:21:54.282Z,1516404114.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:21:54.282Z,1516404114.282 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:21:54.634Z,1516404114.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:54.678Z,1516404114.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:21:54.679Z,1516404114.679 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-01-19T23:21:54.679Z,1516404114.679 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:21:54.679Z,1516404114.679 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-01-19T23:21:54.680Z,1516404114.680 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:21:54.680Z,1516404114.680 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2018-01-19T23:21:55.027Z,1516404115.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:55.040Z,1516404115.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:21:55.053Z,1516404115.053 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:21:55.053Z,1516404115.053 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:21:55.054Z,1516404115.054 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:21:55.054Z,1516404115.054 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:21:55.054Z,1516404115.054 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:21:55.055Z,1516404115.055 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:21:55.055Z,1516404115.055 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:21:55.055Z,1516404115.055 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:21:55.427Z,1516404115.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:55.441Z,1516404115.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:21:55.442Z,1516404115.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:55.831Z,1516404115.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:55.868Z,1516404115.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:21:55.873Z,1516404115.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:56.236Z,1516404116.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:56.250Z,1516404116.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:21:56.251Z,1516404116.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:56.635Z,1516404116.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:56.649Z,1516404116.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:21:56.650Z,1516404116.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:57.034Z,1516404117.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:57.054Z,1516404117.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:21:57.055Z,1516404117.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:57.450Z,1516404117.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:57.483Z,1516404117.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:21:57.484Z,1516404117.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:57.842Z,1516404117.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:57.862Z,1516404117.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:21:57.863Z,1516404117.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:58.225Z,1516404118.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:58.256Z,1516404118.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:21:58.257Z,1516404118.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:58.638Z,1516404118.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:58.652Z,1516404118.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:21:58.653Z,1516404118.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:59.033Z,1516404119.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:59.053Z,1516404119.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:21:59.054Z,1516404119.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:59.432Z,1516404119.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:59.449Z,1516404119.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:21:59.450Z,1516404119.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:21:59.841Z,1516404119.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:21:59.855Z,1516404119.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:21:59.856Z,1516404119.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:00.241Z,1516404120.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:00.255Z,1516404120.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:22:00.256Z,1516404120.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:00.642Z,1516404120.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:00.656Z,1516404120.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:22:00.657Z,1516404120.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:01.035Z,1516404121.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:01.054Z,1516404121.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:22:01.055Z,1516404121.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:01.429Z,1516404121.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:01.460Z,1516404121.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:22:01.460Z,1516404121.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:01.840Z,1516404121.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:01.858Z,1516404121.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:22:01.859Z,1516404121.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:02.235Z,1516404122.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:02.255Z,1516404122.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:22:02.256Z,1516404122.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:02.630Z,1516404122.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:02.654Z,1516404122.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:22:02.655Z,1516404122.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:03.042Z,1516404123.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:03.055Z,1516404123.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:22:03.056Z,1516404123.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:03.444Z,1516404123.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:03.462Z,1516404123.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:22:03.463Z,1516404123.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:03.845Z,1516404123.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:03.859Z,1516404123.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:22:03.859Z,1516404123.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:04.226Z,1516404124.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:04.248Z,1516404124.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:22:04.249Z,1516404124.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:04.630Z,1516404124.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:04.651Z,1516404124.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:22:04.652Z,1516404124.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:05.039Z,1516404125.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:05.052Z,1516404125.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:22:05.053Z,1516404125.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:05.432Z,1516404125.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:05.450Z,1516404125.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:22:05.451Z,1516404125.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:05.858Z,1516404125.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:05.872Z,1516404125.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:22:05.889Z,1516404125.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:06.249Z,1516404126.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:06.270Z,1516404126.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:22:06.271Z,1516404126.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:06.642Z,1516404126.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:06.656Z,1516404126.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:22:06.657Z,1516404126.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:07.030Z,1516404127.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:07.052Z,1516404127.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:22:07.053Z,1516404127.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:07.434Z,1516404127.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:07.458Z,1516404127.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:22:07.459Z,1516404127.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:07.831Z,1516404127.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:07.850Z,1516404127.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:22:07.851Z,1516404127.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:08.228Z,1516404128.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:08.242Z,1516404128.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:22:08.243Z,1516404128.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:08.629Z,1516404128.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:08.643Z,1516404128.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:22:08.644Z,1516404128.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:09.038Z,1516404129.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:09.052Z,1516404129.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:22:09.053Z,1516404129.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:09.442Z,1516404129.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:09.456Z,1516404129.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:22:09.457Z,1516404129.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:09.850Z,1516404129.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:09.870Z,1516404129.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:22:09.871Z,1516404129.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:10.231Z,1516404130.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:10.250Z,1516404130.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:22:10.251Z,1516404130.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:10.625Z,1516404130.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:10.639Z,1516404130.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:22:10.640Z,1516404130.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:11.029Z,1516404131.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:11.051Z,1516404131.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:22:11.052Z,1516404131.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:11.427Z,1516404131.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:11.459Z,1516404131.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:22:11.460Z,1516404131.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:11.859Z,1516404131.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:11.887Z,1516404131.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:22:11.893Z,1516404131.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:12.251Z,1516404132.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:12.265Z,1516404132.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:22:12.266Z,1516404132.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:12.650Z,1516404132.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:12.664Z,1516404132.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:22:12.665Z,1516404132.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:13.027Z,1516404133.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:13.058Z,1516404133.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T23:22:13.058Z,1516404133.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:13.427Z,1516404133.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:13.457Z,1516404133.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T23:22:13.458Z,1516404133.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:13.823Z,1516404133.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:13.839Z,1516404133.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:22:13.840Z,1516404133.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:14.232Z,1516404134.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:14.266Z,1516404134.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:14.631Z,1516404134.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:14.667Z,1516404134.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:15.042Z,1516404135.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:15.072Z,1516404135.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:15.446Z,1516404135.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:15.476Z,1516404135.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:15.850Z,1516404135.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:15.875Z,1516404135.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:16.228Z,1516404136.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:16.246Z,1516404136.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:16.632Z,1516404136.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:16.646Z,1516404136.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:17.033Z,1516404137.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:17.048Z,1516404137.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:17.431Z,1516404137.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:17.451Z,1516404137.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:17.846Z,1516404137.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:17.876Z,1516404137.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:18.246Z,1516404138.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:18.269Z,1516404138.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:18.634Z,1516404138.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:18.648Z,1516404138.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:19.033Z,1516404139.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:19.047Z,1516404139.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:19.432Z,1516404139.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:19.455Z,1516404139.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:19.837Z,1516404139.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:19.852Z,1516404139.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:20.235Z,1516404140.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:20.252Z,1516404140.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:20.638Z,1516404140.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:20.652Z,1516404140.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:21.050Z,1516404141.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:21.078Z,1516404141.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:21.442Z,1516404141.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:21.456Z,1516404141.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:21.851Z,1516404141.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:21.883Z,1516404141.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:22.236Z,1516404142.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:22.251Z,1516404142.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:22.639Z,1516404142.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:22.659Z,1516404142.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:23.039Z,1516404143.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:23.053Z,1516404143.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:23.433Z,1516404143.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:23.448Z,1516404143.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:23.843Z,1516404143.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:23.863Z,1516404143.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:24.247Z,1516404144.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:24.261Z,1516404144.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:24.644Z,1516404144.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:24.658Z,1516404144.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:25.036Z,1516404145.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:25.055Z,1516404145.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:25.429Z,1516404145.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:25.453Z,1516404145.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:25.826Z,1516404145.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:25.850Z,1516404145.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:26.231Z,1516404146.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:26.254Z,1516404146.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:26.629Z,1516404146.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:26.656Z,1516404146.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:27.041Z,1516404147.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:27.060Z,1516404147.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:27.446Z,1516404147.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:27.462Z,1516404147.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:27.842Z,1516404147.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:27.856Z,1516404147.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:28.236Z,1516404148.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:28.255Z,1516404148.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:28.636Z,1516404148.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:28.655Z,1516404148.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:29.040Z,1516404149.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:29.054Z,1516404149.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:29.437Z,1516404149.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:29.451Z,1516404149.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:29.846Z,1516404149.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:29.860Z,1516404149.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:30.246Z,1516404150.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:30.260Z,1516404150.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:30.642Z,1516404150.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:30.656Z,1516404150.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:31.040Z,1516404151.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:31.054Z,1516404151.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:31.432Z,1516404151.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:31.454Z,1516404151.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:31.840Z,1516404151.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:31.854Z,1516404151.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:32.237Z,1516404152.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:32.327Z,1516404152.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:32.633Z,1516404152.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:32.648Z,1516404152.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:33.045Z,1516404153.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:33.060Z,1516404153.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:33.443Z,1516404153.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:33.459Z,1516404153.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:33.845Z,1516404153.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:33.860Z,1516404153.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:34.239Z,1516404154.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:34.258Z,1516404154.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:34.635Z,1516404154.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:34.655Z,1516404154.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:35.032Z,1516404155.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:35.050Z,1516404155.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:35.439Z,1516404155.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:35.459Z,1516404155.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:35.844Z,1516404155.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:35.863Z,1516404155.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:36.246Z,1516404156.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:36.260Z,1516404156.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:36.642Z,1516404156.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:36.656Z,1516404156.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:37.035Z,1516404157.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:37.055Z,1516404157.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:37.431Z,1516404157.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:37.445Z,1516404157.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:37.839Z,1516404157.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:37.859Z,1516404157.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:38.236Z,1516404158.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:38.251Z,1516404158.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:38.632Z,1516404158.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:38.650Z,1516404158.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:39.045Z,1516404159.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:39.059Z,1516404159.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:39.443Z,1516404159.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:39.463Z,1516404159.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:39.846Z,1516404159.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:39.859Z,1516404159.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:40.226Z,1516404160.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:40.248Z,1516404160.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:40.630Z,1516404160.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:40.652Z,1516404160.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:41.032Z,1516404161.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:41.050Z,1516404161.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:41.438Z,1516404161.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:41.452Z,1516404161.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:41.845Z,1516404161.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:41.860Z,1516404161.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:42.246Z,1516404162.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:42.260Z,1516404162.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:42.645Z,1516404162.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:42.667Z,1516404162.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:43.035Z,1516404163.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:43.055Z,1516404163.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:43.431Z,1516404163.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:43.445Z,1516404163.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:43.839Z,1516404163.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:43.859Z,1516404163.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:44.236Z,1516404164.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:44.259Z,1516404164.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:44.640Z,1516404164.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:44.653Z,1516404164.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:45.045Z,1516404165.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:45.059Z,1516404165.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:45.446Z,1516404165.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:45.460Z,1516404165.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:45.846Z,1516404165.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:45.859Z,1516404165.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:48.928Z,1516404168.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:48.943Z,1516404168.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:49.041Z,1516404169.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:49.086Z,1516404169.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:49.406Z,1516404169.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:49.420Z,1516404169.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:49.814Z,1516404169.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:49.844Z,1516404169.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:50.201Z,1516404170.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:50.223Z,1516404170.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:50.597Z,1516404170.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:50.616Z,1516404170.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:51.002Z,1516404171.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:51.016Z,1516404171.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:51.395Z,1516404171.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:51.410Z,1516404171.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:51.802Z,1516404171.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:51.816Z,1516404171.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:52.214Z,1516404172.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:52.228Z,1516404172.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:52.606Z,1516404172.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:52.620Z,1516404172.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:52.993Z,1516404172.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:53.007Z,1516404173.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:53.406Z,1516404173.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:53.429Z,1516404173.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:53.810Z,1516404173.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:53.840Z,1516404173.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:54.210Z,1516404174.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:54.239Z,1516404174.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:54.610Z,1516404174.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:54.635Z,1516404174.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:54.996Z,1516404174.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:55.010Z,1516404175.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:55.399Z,1516404175.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:55.435Z,1516404175.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:55.798Z,1516404175.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:55.812Z,1516404175.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:56.198Z,1516404176.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:56.213Z,1516404176.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:56.598Z,1516404176.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:56.619Z,1516404176.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:57.010Z,1516404177.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:57.024Z,1516404177.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:57.406Z,1516404177.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:57.420Z,1516404177.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:57.806Z,1516404177.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:57.820Z,1516404177.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:58.203Z,1516404178.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:58.217Z,1516404178.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:58.594Z,1516404178.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:58.621Z,1516404178.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:59.006Z,1516404179.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:59.020Z,1516404179.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:59.406Z,1516404179.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:59.420Z,1516404179.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:22:59.808Z,1516404179.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:22:59.822Z,1516404179.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:00.211Z,1516404180.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:00.226Z,1516404180.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:00.608Z,1516404180.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:00.622Z,1516404180.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:01.004Z,1516404181.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:01.020Z,1516404181.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:01.403Z,1516404181.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:01.419Z,1516404181.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:01.806Z,1516404181.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:01.822Z,1516404181.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:02.206Z,1516404182.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:02.222Z,1516404182.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:02.605Z,1516404182.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:02.619Z,1516404182.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:03.005Z,1516404183.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:03.019Z,1516404183.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:03.396Z,1516404183.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:03.410Z,1516404183.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:03.807Z,1516404183.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:03.821Z,1516404183.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:04.206Z,1516404184.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:04.226Z,1516404184.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:04.607Z,1516404184.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:04.621Z,1516404184.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:05.004Z,1516404185.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:05.018Z,1516404185.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:05.396Z,1516404185.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:05.411Z,1516404185.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:05.803Z,1516404185.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:05.823Z,1516404185.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:06.210Z,1516404186.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:06.231Z,1516404186.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:06.609Z,1516404186.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:06.630Z,1516404186.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:07.004Z,1516404187.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:07.018Z,1516404187.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:07.402Z,1516404187.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:07.416Z,1516404187.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:07.806Z,1516404187.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:07.820Z,1516404187.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:08.210Z,1516404188.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:08.224Z,1516404188.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:08.608Z,1516404188.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:08.627Z,1516404188.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:08.998Z,1516404188.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:09.012Z,1516404189.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:09.403Z,1516404189.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:09.423Z,1516404189.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:09.808Z,1516404189.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:09.827Z,1516404189.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:10.210Z,1516404190.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:10.223Z,1516404190.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:10.609Z,1516404190.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:10.627Z,1516404190.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:10.999Z,1516404190.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:11.014Z,1516404191.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:11.396Z,1516404191.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:11.414Z,1516404191.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:11.809Z,1516404191.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:11.823Z,1516404191.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:12.210Z,1516404192.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:12.224Z,1516404192.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:12.609Z,1516404192.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:12.630Z,1516404192.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:12.998Z,1516404192.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:13.012Z,1516404193.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:13.399Z,1516404193.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:13.413Z,1516404193.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:13.806Z,1516404193.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:13.820Z,1516404193.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:14.210Z,1516404194.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:14.224Z,1516404194.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:14.608Z,1516404194.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:14.627Z,1516404194.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:15.074Z,1516404195.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:15.110Z,1516404195.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:15.403Z,1516404195.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:15.423Z,1516404195.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:15.808Z,1516404195.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:15.827Z,1516404195.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:16.209Z,1516404196.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:16.223Z,1516404196.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:16.609Z,1516404196.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:16.623Z,1516404196.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:17.004Z,1516404197.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:17.018Z,1516404197.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:17.404Z,1516404197.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:17.418Z,1516404197.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:17.808Z,1516404197.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:17.827Z,1516404197.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:18.210Z,1516404198.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:18.224Z,1516404198.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:18.610Z,1516404198.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:18.630Z,1516404198.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:19.001Z,1516404199.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:19.023Z,1516404199.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:19.403Z,1516404199.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:19.423Z,1516404199.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:19.809Z,1516404199.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:19.823Z,1516404199.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:20.210Z,1516404200.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:20.224Z,1516404200.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:20.609Z,1516404200.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:20.623Z,1516404200.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:21.000Z,1516404201.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:21.018Z,1516404201.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:21.403Z,1516404201.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:21.423Z,1516404201.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:21.812Z,1516404201.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:21.831Z,1516404201.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:22.213Z,1516404202.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:22.227Z,1516404202.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:22.613Z,1516404202.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:22.627Z,1516404202.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:22.998Z,1516404202.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:23.016Z,1516404203.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:23.404Z,1516404203.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:23.417Z,1516404203.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:23.813Z,1516404203.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:23.828Z,1516404203.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:24.216Z,1516404204.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:24.235Z,1516404204.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:24.614Z,1516404204.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:24.634Z,1516404204.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:25.004Z,1516404205.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:25.018Z,1516404205.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:25.391Z,1516404205.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:25.422Z,1516404205.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:25.805Z,1516404205.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:25.827Z,1516404205.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:26.216Z,1516404206.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:26.235Z,1516404206.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:26.613Z,1516404206.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:26.635Z,1516404206.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:27.005Z,1516404207.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:27.018Z,1516404207.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:27.402Z,1516404207.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:27.420Z,1516404207.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:27.810Z,1516404207.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:27.824Z,1516404207.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:28.208Z,1516404208.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:28.233Z,1516404208.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:28.610Z,1516404208.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:28.624Z,1516404208.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:28.992Z,1516404208.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:29.022Z,1516404209.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:29.395Z,1516404209.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:29.428Z,1516404209.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:29.814Z,1516404209.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:29.828Z,1516404209.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:30.214Z,1516404210.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:30.232Z,1516404210.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:30.598Z,1516404210.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:30.630Z,1516404210.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:30.996Z,1516404210.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:31.026Z,1516404211.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:31.461Z,1516404211.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:31.495Z,1516404211.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:31.808Z,1516404211.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:31.844Z,1516404211.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:32.235Z,1516404212.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:32.249Z,1516404212.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:32.612Z,1516404212.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:32.643Z,1516404212.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:33.009Z,1516404213.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:33.041Z,1516404213.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:33.418Z,1516404213.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:33.454Z,1516404213.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:33.818Z,1516404213.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:33.832Z,1516404213.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:34.226Z,1516404214.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:34.288Z,1516404214.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:34.627Z,1516404214.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:34.655Z,1516404214.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:34.992Z,1516404214.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:35.015Z,1516404215.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:35.403Z,1516404215.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:35.460Z,1516404215.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:35.802Z,1516404215.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:35.816Z,1516404215.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:36.232Z,1516404216.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:36.271Z,1516404216.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:36.617Z,1516404216.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:36.648Z,1516404216.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:37.014Z,1516404217.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:37.070Z,1516404217.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:37.436Z,1516404217.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:37.480Z,1516404217.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:37.794Z,1516404217.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:37.854Z,1516404217.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:38.204Z,1516404218.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:38.231Z,1516404218.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:38.602Z,1516404218.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:38.652Z,1516404218.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:39.015Z,1516404219.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:39.070Z,1516404219.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:39.411Z,1516404219.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:39.431Z,1516404219.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:39.843Z,1516404219.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:39.875Z,1516404219.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:40.204Z,1516404220.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:40.270Z,1516404220.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:40.592Z,1516404220.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:40.628Z,1516404220.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:41.004Z,1516404221.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:41.019Z,1516404221.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:41.389Z,1516404221.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:41.424Z,1516404221.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:41.804Z,1516404221.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:41.823Z,1516404221.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:42.211Z,1516404222.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:42.231Z,1516404222.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:42.618Z,1516404222.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:42.639Z,1516404222.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:43.011Z,1516404223.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:43.025Z,1516404223.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:43.402Z,1516404223.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:43.427Z,1516404223.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:43.804Z,1516404223.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:43.818Z,1516404223.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:44.205Z,1516404224.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:44.220Z,1516404224.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:44.591Z,1516404224.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:44.619Z,1516404224.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:45.015Z,1516404225.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:45.029Z,1516404225.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:45.410Z,1516404225.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:45.424Z,1516404225.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:45.810Z,1516404225.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:45.824Z,1516404225.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:46.188Z,1516404226.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:46.223Z,1516404226.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:49.311Z,1516404229.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:49.331Z,1516404229.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:49.428Z,1516404229.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:49.471Z,1516404229.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:49.798Z,1516404229.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:49.823Z,1516404229.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:50.211Z,1516404230.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:50.225Z,1516404230.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:50.594Z,1516404230.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:50.619Z,1516404230.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:50.987Z,1516404230.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:51.022Z,1516404231.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:51.384Z,1516404231.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:51.398Z,1516404231.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:51.781Z,1516404231.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:51.795Z,1516404231.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:52.198Z,1516404232.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:52.221Z,1516404232.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:52.602Z,1516404232.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:52.630Z,1516404232.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:52.994Z,1516404232.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:53.024Z,1516404233.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:53.380Z,1516404233.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:53.399Z,1516404233.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:53.783Z,1516404233.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:53.797Z,1516404233.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:54.181Z,1516404234.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:54.203Z,1516404234.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:54.587Z,1516404234.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:54.607Z,1516404234.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:55.002Z,1516404235.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:55.033Z,1516404235.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:55.398Z,1516404235.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:55.412Z,1516404235.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:55.798Z,1516404235.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:55.812Z,1516404235.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:56.185Z,1516404236.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:56.198Z,1516404236.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:56.589Z,1516404236.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:56.603Z,1516404236.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:56.984Z,1516404236.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:57.003Z,1516404237.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:57.389Z,1516404237.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:57.403Z,1516404237.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:57.789Z,1516404237.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:57.803Z,1516404237.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:58.202Z,1516404238.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:58.231Z,1516404238.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:58.602Z,1516404238.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:58.631Z,1516404238.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:59.002Z,1516404239.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:59.031Z,1516404239.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:59.386Z,1516404239.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:59.400Z,1516404239.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:23:59.788Z,1516404239.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:23:59.802Z,1516404239.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:00.190Z,1516404240.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:00.204Z,1516404240.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:00.586Z,1516404240.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:00.600Z,1516404240.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:00.993Z,1516404240.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:01.007Z,1516404241.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:01.402Z,1516404241.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:01.432Z,1516404241.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:01.794Z,1516404241.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:01.808Z,1516404241.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:02.185Z,1516404242.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:02.199Z,1516404242.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:02.585Z,1516404242.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:02.603Z,1516404242.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:02.989Z,1516404242.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:03.030Z,1516404243.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:03.384Z,1516404243.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:03.398Z,1516404243.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:03.789Z,1516404243.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:03.803Z,1516404243.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:04.205Z,1516404244.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:04.219Z,1516404244.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:04.606Z,1516404244.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:04.619Z,1516404244.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:05.002Z,1516404245.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:05.016Z,1516404245.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:05.390Z,1516404245.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:05.408Z,1516404245.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:05.775Z,1516404245.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:05.803Z,1516404245.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:06.192Z,1516404246.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:06.207Z,1516404246.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:06.594Z,1516404246.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:06.608Z,1516404246.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:06.999Z,1516404246.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:07.013Z,1516404247.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:07.405Z,1516404247.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:07.445Z,1516404247.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:07.798Z,1516404247.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:07.812Z,1516404247.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:08.192Z,1516404248.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:08.206Z,1516404248.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:08.579Z,1516404248.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:08.605Z,1516404248.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:08.979Z,1516404248.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:09.015Z,1516404249.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:09.384Z,1516404249.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:09.410Z,1516404249.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:09.783Z,1516404249.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:09.808Z,1516404249.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:10.198Z,1516404250.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:10.212Z,1516404250.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:10.600Z,1516404250.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:10.625Z,1516404250.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:10.998Z,1516404250.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:11.012Z,1516404251.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:11.379Z,1516404251.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:11.404Z,1516404251.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:11.778Z,1516404251.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:11.810Z,1516404251.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:12.184Z,1516404252.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:12.209Z,1516404252.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:12.579Z,1516404252.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:12.604Z,1516404252.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:12.999Z,1516404252.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:13.013Z,1516404253.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:13.402Z,1516404253.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:13.416Z,1516404253.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:13.794Z,1516404253.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:13.815Z,1516404253.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:14.181Z,1516404254.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:14.207Z,1516404254.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:14.581Z,1516404254.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:14.606Z,1516404254.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:14.980Z,1516404254.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:15.006Z,1516404255.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:15.380Z,1516404255.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:15.416Z,1516404255.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:15.783Z,1516404255.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:15.815Z,1516404255.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:16.200Z,1516404256.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:16.214Z,1516404256.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:16.600Z,1516404256.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:16.630Z,1516404256.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:16.999Z,1516404256.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:17.013Z,1516404257.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:17.379Z,1516404257.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:17.405Z,1516404257.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:17.779Z,1516404257.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:17.816Z,1516404257.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:18.184Z,1516404258.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:18.210Z,1516404258.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:18.580Z,1516404258.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:18.610Z,1516404258.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:19.007Z,1516404259.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:19.021Z,1516404259.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:19.386Z,1516404259.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:19.419Z,1516404259.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:19.802Z,1516404259.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:19.816Z,1516404259.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:20.180Z,1516404260.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:20.211Z,1516404260.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:20.577Z,1516404260.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:20.600Z,1516404260.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:20.983Z,1516404260.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:21.015Z,1516404261.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:21.380Z,1516404261.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:21.418Z,1516404261.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:21.783Z,1516404261.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:21.815Z,1516404261.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:22.190Z,1516404262.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:22.223Z,1516404262.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:22.608Z,1516404262.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:22.622Z,1516404262.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:22.990Z,1516404262.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:23.023Z,1516404263.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:23.379Z,1516404263.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:23.415Z,1516404263.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:23.778Z,1516404263.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:23.792Z,1516404263.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:24.184Z,1516404264.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:24.214Z,1516404264.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:24.583Z,1516404264.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:24.619Z,1516404264.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:24.998Z,1516404264.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:25.023Z,1516404265.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:25.386Z,1516404265.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:25.400Z,1516404265.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:25.798Z,1516404265.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:25.821Z,1516404265.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:26.187Z,1516404266.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:26.201Z,1516404266.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:26.577Z,1516404266.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:26.595Z,1516404266.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:26.987Z,1516404266.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:27.023Z,1516404267.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:27.388Z,1516404267.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:27.402Z,1516404267.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:27.785Z,1516404267.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:27.799Z,1516404267.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:28.202Z,1516404268.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:28.223Z,1516404268.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:28.598Z,1516404268.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:28.624Z,1516404268.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:28.986Z,1516404268.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:29.000Z,1516404269.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:29.389Z,1516404269.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:29.403Z,1516404269.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:29.789Z,1516404269.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:29.802Z,1516404269.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:30.214Z,1516404270.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:30.235Z,1516404270.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:30.584Z,1516404270.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:30.603Z,1516404270.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:30.998Z,1516404270.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:31.029Z,1516404271.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:31.388Z,1516404271.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:31.424Z,1516404271.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:31.794Z,1516404271.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:31.808Z,1516404271.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:32.192Z,1516404272.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:32.206Z,1516404272.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:32.584Z,1516404272.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:32.602Z,1516404272.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:32.991Z,1516404272.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:33.006Z,1516404273.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:33.389Z,1516404273.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:33.403Z,1516404273.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:33.792Z,1516404273.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:33.806Z,1516404273.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:34.193Z,1516404274.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:34.215Z,1516404274.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:34.598Z,1516404274.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:34.612Z,1516404274.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:34.994Z,1516404274.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:35.008Z,1516404275.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:35.387Z,1516404275.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:35.402Z,1516404275.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:35.792Z,1516404275.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:35.806Z,1516404275.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:36.191Z,1516404276.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:36.211Z,1516404276.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:36.587Z,1516404276.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:36.602Z,1516404276.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:36.994Z,1516404276.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:37.008Z,1516404277.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:37.388Z,1516404277.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:37.415Z,1516404277.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:37.798Z,1516404277.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:37.812Z,1516404277.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:38.192Z,1516404278.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:38.206Z,1516404278.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:38.585Z,1516404278.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:38.599Z,1516404278.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:38.987Z,1516404278.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:39.001Z,1516404279.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:39.389Z,1516404279.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:39.403Z,1516404279.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:39.791Z,1516404279.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:39.806Z,1516404279.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:40.197Z,1516404280.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:40.211Z,1516404280.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:40.597Z,1516404280.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:40.611Z,1516404280.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:40.993Z,1516404280.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:41.008Z,1516404281.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:41.395Z,1516404281.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:41.410Z,1516404281.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:41.788Z,1516404281.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:41.802Z,1516404281.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:42.192Z,1516404282.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:42.207Z,1516404282.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:42.587Z,1516404282.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:42.601Z,1516404282.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:43.010Z,1516404283.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:43.041Z,1516404283.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:43.394Z,1516404283.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:43.408Z,1516404283.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:43.797Z,1516404283.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:43.811Z,1516404283.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:44.189Z,1516404284.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:44.203Z,1516404284.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:44.587Z,1516404284.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:44.602Z,1516404284.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:44.995Z,1516404284.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:45.009Z,1516404285.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:45.389Z,1516404285.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:45.403Z,1516404285.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:45.786Z,1516404285.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:45.800Z,1516404285.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:46.197Z,1516404286.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:46.212Z,1516404286.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:46.599Z,1516404286.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:46.613Z,1516404286.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:49.684Z,1516404289.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:49.698Z,1516404289.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:49.804Z,1516404289.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:49.839Z,1516404289.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:50.158Z,1516404290.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:50.172Z,1516404290.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:50.561Z,1516404290.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:50.575Z,1516404290.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:50.955Z,1516404290.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:50.998Z,1516404290.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:51.369Z,1516404291.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:51.375Z,1516404291.375 [PNI_TCM](ERROR): CRC does not match. Expected:0x19016 got:0x3253
2018-01-19T23:24:51.408Z,1516404291.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:51.767Z,1516404291.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:51.797Z,1516404291.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:52.161Z,1516404292.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:52.176Z,1516404292.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:52.555Z,1516404292.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:52.596Z,1516404292.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:52.962Z,1516404292.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:52.977Z,1516404292.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:53.359Z,1516404293.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:53.379Z,1516404293.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:53.763Z,1516404293.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:53.778Z,1516404293.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:54.157Z,1516404294.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:54.183Z,1516404294.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:54.550Z,1516404294.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:54.578Z,1516404294.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:54.970Z,1516404294.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:55.002Z,1516404295.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:55.366Z,1516404295.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:55.380Z,1516404295.380 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:55.380Z,1516404295.380 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-01-19T23:24:55.380Z,1516404295.380 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:24:55.382Z,1516404295.382 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:55.382Z,1516404295.382 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-01-19T23:24:55.382Z,1516404295.382 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:24:55.384Z,1516404295.384 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:55.384Z,1516404295.384 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2018-01-19T23:24:55.384Z,1516404295.384 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:24:55.435Z,1516404295.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:24:55.435Z,1516404295.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:24:55.435Z,1516404295.435 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:24:55.758Z,1516404295.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:55.819Z,1516404295.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:24:55.819Z,1516404295.819 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-01-19T23:24:55.820Z,1516404295.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:24:55.820Z,1516404295.820 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-01-19T23:24:55.820Z,1516404295.820 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:24:55.820Z,1516404295.820 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2018-01-19T23:24:56.158Z,1516404296.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:56.168Z,1516404296.168 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2018-01-19T23:24:56.194Z,1516404296.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:24:56.195Z,1516404296.195 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:24:56.195Z,1516404296.195 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:24:56.195Z,1516404296.195 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:24:56.196Z,1516404296.196 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:24:56.196Z,1516404296.196 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:24:56.196Z,1516404296.196 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:24:56.213Z,1516404296.213 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:24:56.214Z,1516404296.214 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:24:56.544Z,1516404296.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:56.563Z,1516404296.563 [PNI_TCM](ERROR): CRC does not match. Expected:0x37102 got:0x12009
2018-01-19T23:24:56.582Z,1516404296.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:24:56.583Z,1516404296.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:56.965Z,1516404296.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:56.983Z,1516404296.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:24:56.984Z,1516404296.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:57.372Z,1516404297.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:57.418Z,1516404297.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:24:57.419Z,1516404297.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:57.775Z,1516404297.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:57.781Z,1516404297.781 [PNI_TCM](ERROR): CRC does not match. Expected:0x6825 got:0x49152
2018-01-19T23:24:57.798Z,1516404297.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:24:57.799Z,1516404297.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:58.147Z,1516404298.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:58.177Z,1516404298.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:24:58.178Z,1516404298.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:58.550Z,1516404298.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:58.586Z,1516404298.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:24:58.587Z,1516404298.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:58.973Z,1516404298.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:58.998Z,1516404298.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:24:58.999Z,1516404298.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:59.358Z,1516404299.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:59.378Z,1516404299.378 [PNI_TCM](ERROR): CRC does not match. Expected:0x5148 got:0x5707
2018-01-19T23:24:59.395Z,1516404299.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:24:59.396Z,1516404299.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:24:59.774Z,1516404299.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:24:59.788Z,1516404299.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:24:59.789Z,1516404299.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:00.150Z,1516404300.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:00.178Z,1516404300.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:25:00.179Z,1516404300.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:00.546Z,1516404300.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:00.591Z,1516404300.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:25:00.592Z,1516404300.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:00.966Z,1516404300.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:01.002Z,1516404301.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:25:01.003Z,1516404301.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:01.372Z,1516404301.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:01.397Z,1516404301.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:25:01.398Z,1516404301.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:01.768Z,1516404301.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:01.791Z,1516404301.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:25:01.792Z,1516404301.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:02.160Z,1516404302.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:02.195Z,1516404302.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:25:02.196Z,1516404302.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:02.559Z,1516404302.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:02.579Z,1516404302.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:25:02.580Z,1516404302.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:02.963Z,1516404302.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:02.979Z,1516404302.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:25:02.980Z,1516404302.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:03.364Z,1516404303.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:03.382Z,1516404303.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:25:03.383Z,1516404303.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:03.766Z,1516404303.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:03.803Z,1516404303.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:25:03.803Z,1516404303.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:04.154Z,1516404304.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:04.168Z,1516404304.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:25:04.169Z,1516404304.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:04.554Z,1516404304.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:04.576Z,1516404304.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:25:04.578Z,1516404304.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:04.965Z,1516404304.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:04.979Z,1516404304.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:25:04.980Z,1516404304.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:05.366Z,1516404305.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:05.404Z,1516404305.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:25:05.405Z,1516404305.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:05.765Z,1516404305.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:05.788Z,1516404305.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:25:05.805Z,1516404305.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:06.157Z,1516404306.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:06.174Z,1516404306.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:25:06.175Z,1516404306.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:06.554Z,1516404306.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:06.571Z,1516404306.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:25:06.572Z,1516404306.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:06.966Z,1516404306.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:06.980Z,1516404306.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:25:06.981Z,1516404306.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:07.365Z,1516404307.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:07.401Z,1516404307.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:25:07.402Z,1516404307.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:07.763Z,1516404307.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:07.780Z,1516404307.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:25:07.781Z,1516404307.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:08.150Z,1516404308.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:08.190Z,1516404308.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:25:08.191Z,1516404308.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:08.548Z,1516404308.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:08.574Z,1516404308.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:25:08.575Z,1516404308.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:08.967Z,1516404308.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:08.990Z,1516404308.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:25:08.991Z,1516404308.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:09.371Z,1516404309.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:09.388Z,1516404309.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:25:09.389Z,1516404309.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:09.773Z,1516404309.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:09.787Z,1516404309.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:25:09.788Z,1516404309.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:10.148Z,1516404310.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:10.190Z,1516404310.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:25:10.192Z,1516404310.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:10.547Z,1516404310.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:10.578Z,1516404310.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:25:10.579Z,1516404310.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:10.963Z,1516404310.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:10.981Z,1516404310.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:25:10.982Z,1516404310.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:11.368Z,1516404311.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:11.384Z,1516404311.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:25:11.384Z,1516404311.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:11.770Z,1516404311.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:11.818Z,1516404311.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:25:11.819Z,1516404311.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:12.144Z,1516404312.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:12.175Z,1516404312.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:25:12.176Z,1516404312.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:12.546Z,1516404312.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:12.571Z,1516404312.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:25:12.572Z,1516404312.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:12.947Z,1516404312.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:12.985Z,1516404312.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:25:12.986Z,1516404312.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:13.364Z,1516404313.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:13.377Z,1516404313.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:25:13.378Z,1516404313.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:13.771Z,1516404313.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:13.784Z,1516404313.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:25:13.785Z,1516404313.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:14.170Z,1516404314.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:14.188Z,1516404314.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T23:25:14.189Z,1516404314.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:14.548Z,1516404314.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:14.578Z,1516404314.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T23:25:14.579Z,1516404314.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:14.944Z,1516404314.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:14.966Z,1516404314.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:25:14.966Z,1516404314.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:15.348Z,1516404315.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:15.396Z,1516404315.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:15.748Z,1516404315.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:15.780Z,1516404315.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:16.171Z,1516404316.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:16.188Z,1516404316.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:16.570Z,1516404316.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:16.584Z,1516404316.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:16.954Z,1516404316.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:16.988Z,1516404316.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:17.342Z,1516404317.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:17.356Z,1516404317.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:17.749Z,1516404317.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:17.771Z,1516404317.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:18.156Z,1516404318.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:18.198Z,1516404318.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:18.552Z,1516404318.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:18.582Z,1516404318.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:18.955Z,1516404318.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:18.970Z,1516404318.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:19.363Z,1516404319.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:19.379Z,1516404319.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:19.765Z,1516404319.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:19.779Z,1516404319.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:20.165Z,1516404320.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:20.187Z,1516404320.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:20.557Z,1516404320.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:20.571Z,1516404320.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:20.949Z,1516404320.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:20.980Z,1516404320.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:21.348Z,1516404321.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:21.383Z,1516404321.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:21.748Z,1516404321.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:21.780Z,1516404321.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:22.171Z,1516404322.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:22.185Z,1516404322.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:22.566Z,1516404322.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:22.591Z,1516404322.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:22.970Z,1516404322.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:22.984Z,1516404322.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:23.342Z,1516404323.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:23.356Z,1516404323.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:23.747Z,1516404323.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:23.779Z,1516404323.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:24.148Z,1516404324.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:24.162Z,1516404324.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:24.546Z,1516404324.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:24.560Z,1516404324.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:24.951Z,1516404324.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:24.971Z,1516404324.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:25.366Z,1516404325.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:25.403Z,1516404325.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:25.762Z,1516404325.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:25.776Z,1516404325.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:26.166Z,1516404326.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:26.180Z,1516404326.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:26.557Z,1516404326.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:26.571Z,1516404326.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:26.950Z,1516404326.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:26.976Z,1516404326.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:27.356Z,1516404327.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:27.375Z,1516404327.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:27.758Z,1516404327.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:27.772Z,1516404327.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:28.167Z,1516404328.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:28.181Z,1516404328.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:28.566Z,1516404328.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:28.580Z,1516404328.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:28.967Z,1516404328.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:28.981Z,1516404328.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:29.350Z,1516404329.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:29.377Z,1516404329.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:29.766Z,1516404329.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:29.779Z,1516404329.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:30.144Z,1516404330.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:30.188Z,1516404330.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:30.543Z,1516404330.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:30.574Z,1516404330.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:30.948Z,1516404330.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:30.983Z,1516404330.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:31.372Z,1516404331.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:31.390Z,1516404331.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:31.771Z,1516404331.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:31.785Z,1516404331.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:32.171Z,1516404332.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:32.186Z,1516404332.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:32.544Z,1516404332.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:32.578Z,1516404332.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:32.946Z,1516404332.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:32.976Z,1516404332.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:33.348Z,1516404333.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:33.383Z,1516404333.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:33.748Z,1516404333.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:33.787Z,1516404333.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:34.172Z,1516404334.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:34.186Z,1516404334.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:34.570Z,1516404334.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:34.600Z,1516404334.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:34.962Z,1516404334.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:34.990Z,1516404334.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:35.346Z,1516404335.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:35.360Z,1516404335.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:35.755Z,1516404335.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:35.791Z,1516404335.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:36.148Z,1516404336.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:36.162Z,1516404336.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:36.546Z,1516404336.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:36.560Z,1516404336.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:36.956Z,1516404336.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:36.970Z,1516404336.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:37.366Z,1516404337.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:37.399Z,1516404337.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:37.770Z,1516404337.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:37.794Z,1516404337.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:38.170Z,1516404338.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:38.194Z,1516404338.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:38.548Z,1516404338.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:38.567Z,1516404338.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:38.952Z,1516404338.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:38.967Z,1516404338.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:39.354Z,1516404339.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:39.369Z,1516404339.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:39.751Z,1516404339.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:39.783Z,1516404339.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:40.166Z,1516404340.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:40.187Z,1516404340.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:40.569Z,1516404340.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:40.591Z,1516404340.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:40.971Z,1516404340.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:40.986Z,1516404340.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:41.346Z,1516404341.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:41.376Z,1516404341.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:41.747Z,1516404341.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:41.773Z,1516404341.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:42.143Z,1516404342.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:42.176Z,1516404342.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:42.546Z,1516404342.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:42.572Z,1516404342.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:42.947Z,1516404342.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:42.979Z,1516404342.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:43.365Z,1516404343.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:43.379Z,1516404343.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:43.764Z,1516404343.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:43.786Z,1516404343.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:44.171Z,1516404344.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:44.185Z,1516404344.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:44.544Z,1516404344.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:44.580Z,1516404344.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:44.946Z,1516404344.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:44.972Z,1516404344.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:45.347Z,1516404345.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:45.383Z,1516404345.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:45.743Z,1516404345.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:45.787Z,1516404345.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:46.158Z,1516404346.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:46.184Z,1516404346.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:46.570Z,1516404346.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:46.587Z,1516404346.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:46.972Z,1516404346.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:46.990Z,1516404346.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:50.047Z,1516404350.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:50.079Z,1516404350.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:50.183Z,1516404350.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:50.222Z,1516404350.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:50.543Z,1516404350.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:50.557Z,1516404350.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:50.951Z,1516404350.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:50.980Z,1516404350.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:51.335Z,1516404351.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:51.349Z,1516404351.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:51.737Z,1516404351.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:51.751Z,1516404351.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:52.137Z,1516404352.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:52.151Z,1516404352.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:52.528Z,1516404352.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:52.551Z,1516404352.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:52.937Z,1516404352.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:52.983Z,1516404352.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:53.338Z,1516404353.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:53.358Z,1516404353.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:53.750Z,1516404353.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:53.780Z,1516404353.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:54.139Z,1516404354.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:54.153Z,1516404354.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:54.537Z,1516404354.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:54.551Z,1516404354.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:54.937Z,1516404354.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:54.951Z,1516404354.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:55.338Z,1516404355.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:55.352Z,1516404355.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:55.737Z,1516404355.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:55.751Z,1516404355.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:56.150Z,1516404356.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:56.180Z,1516404356.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:56.543Z,1516404356.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:56.557Z,1516404356.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:56.952Z,1516404356.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:56.980Z,1516404356.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:57.332Z,1516404357.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:57.359Z,1516404357.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:57.738Z,1516404357.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:57.759Z,1516404357.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:58.131Z,1516404358.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:58.155Z,1516404358.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:58.541Z,1516404358.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:58.555Z,1516404358.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:58.933Z,1516404358.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:58.955Z,1516404358.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:59.345Z,1516404359.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:59.359Z,1516404359.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:25:59.746Z,1516404359.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:25:59.767Z,1516404359.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:00.145Z,1516404360.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:00.159Z,1516404360.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:00.542Z,1516404360.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:00.555Z,1516404360.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:00.940Z,1516404360.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:00.954Z,1516404360.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:01.335Z,1516404361.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:01.354Z,1516404361.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:01.731Z,1516404361.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:01.755Z,1516404361.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:02.145Z,1516404362.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:02.159Z,1516404362.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:02.546Z,1516404362.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:02.567Z,1516404362.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:02.946Z,1516404362.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:02.966Z,1516404362.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:03.330Z,1516404363.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:03.348Z,1516404363.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:03.735Z,1516404363.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:03.754Z,1516404363.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:04.131Z,1516404364.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:04.155Z,1516404364.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:04.542Z,1516404364.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:04.556Z,1516404364.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:04.935Z,1516404364.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:04.954Z,1516404364.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:05.347Z,1516404365.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:05.361Z,1516404365.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:05.747Z,1516404365.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:05.767Z,1516404365.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:06.147Z,1516404366.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:06.167Z,1516404366.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:06.541Z,1516404366.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:06.556Z,1516404366.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:06.940Z,1516404366.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:06.955Z,1516404366.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:07.343Z,1516404367.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:07.359Z,1516404367.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:07.742Z,1516404367.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:07.756Z,1516404367.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:08.145Z,1516404368.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:08.168Z,1516404368.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:08.550Z,1516404368.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:08.564Z,1516404368.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:08.951Z,1516404368.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:08.965Z,1516404368.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:09.333Z,1516404369.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:09.355Z,1516404369.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:09.738Z,1516404369.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:09.763Z,1516404369.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:10.141Z,1516404370.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:10.156Z,1516404370.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:10.542Z,1516404370.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:10.556Z,1516404370.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:10.944Z,1516404370.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:10.958Z,1516404370.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:11.341Z,1516404371.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:11.370Z,1516404371.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:11.754Z,1516404371.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:11.768Z,1516404371.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:12.151Z,1516404372.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:12.165Z,1516404372.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:12.542Z,1516404372.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:12.555Z,1516404372.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:12.925Z,1516404372.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:12.952Z,1516404372.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:13.344Z,1516404373.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:13.358Z,1516404373.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:13.722Z,1516404373.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:13.764Z,1516404373.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:14.138Z,1516404374.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:14.174Z,1516404374.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:14.552Z,1516404374.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:14.566Z,1516404374.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:14.952Z,1516404374.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:14.966Z,1516404374.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:15.332Z,1516404375.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:15.358Z,1516404375.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:15.744Z,1516404375.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:15.768Z,1516404375.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:16.133Z,1516404376.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:16.164Z,1516404376.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:16.537Z,1516404376.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:16.564Z,1516404376.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:16.935Z,1516404376.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:16.965Z,1516404376.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:17.350Z,1516404377.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:17.369Z,1516404377.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:17.750Z,1516404377.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:17.768Z,1516404377.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:18.152Z,1516404378.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:18.171Z,1516404378.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:18.533Z,1516404378.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:18.564Z,1516404378.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:18.928Z,1516404378.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:18.943Z,1516404378.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:19.332Z,1516404379.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:19.347Z,1516404379.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:19.728Z,1516404379.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:19.742Z,1516404379.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:20.143Z,1516404380.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:20.173Z,1516404380.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:20.546Z,1516404380.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:20.568Z,1516404380.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:20.946Z,1516404380.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:20.989Z,1516404380.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:21.328Z,1516404381.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:21.343Z,1516404381.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:21.735Z,1516404381.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:21.749Z,1516404381.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:22.135Z,1516404382.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:22.149Z,1516404382.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:22.529Z,1516404382.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:22.543Z,1516404382.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:22.932Z,1516404382.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:22.951Z,1516404382.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:23.346Z,1516404383.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:23.377Z,1516404383.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:23.747Z,1516404383.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:23.775Z,1516404383.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:24.143Z,1516404384.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:24.169Z,1516404384.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:24.535Z,1516404384.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:24.549Z,1516404384.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:24.937Z,1516404384.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:24.951Z,1516404384.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:25.337Z,1516404385.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:25.351Z,1516404385.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:25.737Z,1516404385.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:25.751Z,1516404385.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:26.147Z,1516404386.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:26.179Z,1516404386.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:26.550Z,1516404386.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:26.580Z,1516404386.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:26.951Z,1516404386.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:26.985Z,1516404386.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:27.324Z,1516404387.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:27.350Z,1516404387.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:27.739Z,1516404387.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:27.754Z,1516404387.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:28.137Z,1516404388.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:28.151Z,1516404388.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:28.540Z,1516404388.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:28.554Z,1516404388.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:28.935Z,1516404388.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:28.955Z,1516404388.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:29.342Z,1516404389.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:29.363Z,1516404389.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:29.741Z,1516404389.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:29.763Z,1516404389.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:30.143Z,1516404390.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:30.157Z,1516404390.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:30.537Z,1516404390.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:30.551Z,1516404390.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:30.931Z,1516404390.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:30.946Z,1516404390.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:31.335Z,1516404391.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:31.353Z,1516404391.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:31.740Z,1516404391.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:31.755Z,1516404391.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:32.143Z,1516404392.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:32.157Z,1516404392.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:32.543Z,1516404392.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:32.557Z,1516404392.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:32.943Z,1516404392.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:32.957Z,1516404392.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:33.331Z,1516404393.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:33.353Z,1516404393.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:33.740Z,1516404393.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:33.754Z,1516404393.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:34.146Z,1516404394.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:34.161Z,1516404394.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:34.546Z,1516404394.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:34.560Z,1516404394.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:34.946Z,1516404394.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:34.960Z,1516404394.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:35.342Z,1516404395.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:35.356Z,1516404395.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:35.726Z,1516404395.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:35.755Z,1516404395.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:36.150Z,1516404396.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:36.171Z,1516404396.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:36.551Z,1516404396.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:36.571Z,1516404396.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:36.950Z,1516404396.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:36.964Z,1516404396.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:37.341Z,1516404397.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:37.355Z,1516404397.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:37.731Z,1516404397.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:37.757Z,1516404397.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:38.143Z,1516404398.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:38.157Z,1516404398.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:38.550Z,1516404398.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:38.564Z,1516404398.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:38.948Z,1516404398.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:38.962Z,1516404398.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:39.341Z,1516404399.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:39.355Z,1516404399.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:39.727Z,1516404399.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:39.755Z,1516404399.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:40.148Z,1516404400.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:40.163Z,1516404400.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:40.554Z,1516404400.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:40.568Z,1516404400.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:40.951Z,1516404400.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:40.965Z,1516404400.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:41.337Z,1516404401.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:41.363Z,1516404401.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:41.743Z,1516404401.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:41.757Z,1516404401.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:42.147Z,1516404402.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:42.162Z,1516404402.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:42.544Z,1516404402.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:42.570Z,1516404402.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:42.952Z,1516404402.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:42.971Z,1516404402.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:43.333Z,1516404403.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:43.359Z,1516404403.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:43.723Z,1516404403.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:43.756Z,1516404403.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:44.152Z,1516404404.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:44.167Z,1516404404.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:44.546Z,1516404404.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:44.577Z,1516404404.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:44.942Z,1516404404.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:44.969Z,1516404404.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:45.337Z,1516404405.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:45.388Z,1516404405.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:45.732Z,1516404405.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:45.771Z,1516404405.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:45.778Z,1516404405.778 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T23:26:45.778Z,1516404405.778 [Default:CheckIn:C.Wait] Stopped
2018-01-19T23:26:45.778Z,1516404405.778 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T23:26:45.778Z,1516404405.778 [Default:CheckIn:D] Running Loop=1
2018-01-19T23:26:46.150Z,1516404406.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:46.177Z,1516404406.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:46.180Z,1516404406.180 [Default:CheckIn:D] Stopped
2018-01-19T23:26:46.180Z,1516404406.180 [Default:CheckIn:E] Running Loop=1
2018-01-19T23:26:46.554Z,1516404406.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:46.587Z,1516404406.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:46.590Z,1516404406.590 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 133.969246 min 
2018-01-19T23:26:46.590Z,1516404406.590 [Default:CheckIn:E] Stopped
2018-01-19T23:26:46.590Z,1516404406.590 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T23:26:46.591Z,1516404406.591 [Default:CheckIn] Stopped
2018-01-19T23:26:46.591Z,1516404406.591 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T23:26:46.591Z,1516404406.591 [Default:CheckIn](INFO): Running loop #14
2018-01-19T23:26:46.591Z,1516404406.591 [Default:CheckIn] Running Loop=14
2018-01-19T23:26:46.591Z,1516404406.591 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T23:26:46.591Z,1516404406.591 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T23:26:46.943Z,1516404406.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:46.969Z,1516404406.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:47.339Z,1516404407.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:47.353Z,1516404407.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:50.426Z,1516404410.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:50.440Z,1516404410.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:50.550Z,1516404410.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:50.582Z,1516404410.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:50.910Z,1516404410.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:50.935Z,1516404410.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:51.306Z,1516404411.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:51.332Z,1516404411.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:51.694Z,1516404411.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:51.735Z,1516404411.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:52.095Z,1516404412.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:52.115Z,1516404412.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:52.496Z,1516404412.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:52.510Z,1516404412.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:52.887Z,1516404412.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:52.905Z,1516404412.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:53.310Z,1516404413.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:53.333Z,1516404413.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:53.702Z,1516404413.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:53.715Z,1516404413.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:54.106Z,1516404414.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:54.120Z,1516404414.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:54.496Z,1516404414.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:54.515Z,1516404414.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:54.896Z,1516404414.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:54.910Z,1516404414.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:55.292Z,1516404415.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:55.306Z,1516404415.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:55.697Z,1516404415.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:55.711Z,1516404415.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:56.092Z,1516404416.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:56.105Z,1516404416.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:56.498Z,1516404416.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:56.512Z,1516404416.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:56.910Z,1516404416.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:56.924Z,1516404416.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:57.302Z,1516404417.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:57.322Z,1516404417.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:57.699Z,1516404417.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:57.719Z,1516404417.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:58.095Z,1516404418.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:58.115Z,1516404418.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:58.500Z,1516404418.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:58.514Z,1516404418.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:58.899Z,1516404418.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:58.919Z,1516404418.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:59.302Z,1516404419.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:59.317Z,1516404419.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:26:59.702Z,1516404419.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:26:59.722Z,1516404419.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:00.102Z,1516404420.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:00.117Z,1516404420.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:00.494Z,1516404420.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:00.511Z,1516404420.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:00.896Z,1516404420.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:00.911Z,1516404420.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:01.293Z,1516404421.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:01.307Z,1516404421.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:01.692Z,1516404421.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:01.721Z,1516404421.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:02.100Z,1516404422.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:02.114Z,1516404422.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:02.496Z,1516404422.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:02.523Z,1516404422.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:02.906Z,1516404422.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:02.920Z,1516404422.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:03.306Z,1516404423.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:03.326Z,1516404423.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:03.693Z,1516404423.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:03.707Z,1516404423.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:04.090Z,1516404424.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:04.117Z,1516404424.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:04.501Z,1516404424.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:04.516Z,1516404424.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:04.899Z,1516404424.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:04.913Z,1516404424.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:05.305Z,1516404425.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:05.320Z,1516404425.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:05.710Z,1516404425.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:05.724Z,1516404425.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:06.102Z,1516404426.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:06.116Z,1516404426.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:06.490Z,1516404426.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:06.512Z,1516404426.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:06.890Z,1516404426.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:06.923Z,1516404426.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:07.281Z,1516404427.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:07.307Z,1516404427.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:07.696Z,1516404427.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:07.721Z,1516404427.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:08.088Z,1516404428.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:08.123Z,1516404428.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:08.499Z,1516404428.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:08.531Z,1516404428.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:08.915Z,1516404428.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:08.929Z,1516404428.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:09.298Z,1516404429.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:09.337Z,1516404429.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:09.691Z,1516404429.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:09.722Z,1516404429.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:10.087Z,1516404430.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:10.122Z,1516404430.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:10.489Z,1516404430.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:10.519Z,1516404430.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:10.891Z,1516404430.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:10.927Z,1516404430.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:11.298Z,1516404431.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:11.323Z,1516404431.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:11.702Z,1516404431.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:11.735Z,1516404431.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:12.106Z,1516404432.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:12.135Z,1516404432.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:12.493Z,1516404432.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:12.507Z,1516404432.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:12.896Z,1516404432.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:12.931Z,1516404432.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:13.295Z,1516404433.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:13.315Z,1516404433.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:13.694Z,1516404433.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:13.708Z,1516404433.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:14.096Z,1516404434.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:14.115Z,1516404434.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:14.506Z,1516404434.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:14.520Z,1516404434.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:14.910Z,1516404434.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:14.924Z,1516404434.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:15.303Z,1516404435.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:15.317Z,1516404435.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:15.700Z,1516404435.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:15.714Z,1516404435.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:16.094Z,1516404436.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:16.109Z,1516404436.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:16.488Z,1516404436.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:16.514Z,1516404436.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:16.897Z,1516404436.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:16.911Z,1516404436.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:17.305Z,1516404437.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:17.319Z,1516404437.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:17.703Z,1516404437.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:17.730Z,1516404437.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:18.098Z,1516404438.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:18.120Z,1516404438.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:18.488Z,1516404438.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:18.514Z,1516404438.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:18.882Z,1516404438.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:18.915Z,1516404438.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:19.291Z,1516404439.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:19.323Z,1516404439.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:19.688Z,1516404439.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:19.715Z,1516404439.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:20.088Z,1516404440.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:20.118Z,1516404440.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:20.515Z,1516404440.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:20.530Z,1516404440.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:20.902Z,1516404440.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:20.932Z,1516404440.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:21.295Z,1516404441.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:21.321Z,1516404441.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:21.692Z,1516404441.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:21.728Z,1516404441.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:22.088Z,1516404442.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:22.103Z,1516404442.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:22.497Z,1516404442.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:22.510Z,1516404442.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:22.895Z,1516404442.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:22.915Z,1516404442.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:23.311Z,1516404443.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:23.340Z,1516404443.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:23.710Z,1516404443.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:23.742Z,1516404443.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:24.094Z,1516404444.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:24.108Z,1516404444.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:24.492Z,1516404444.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:24.511Z,1516404444.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:24.894Z,1516404444.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:24.908Z,1516404444.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:25.294Z,1516404445.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:25.308Z,1516404445.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:25.695Z,1516404445.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:25.712Z,1516404445.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:26.094Z,1516404446.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:26.117Z,1516404446.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:26.510Z,1516404446.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:26.524Z,1516404446.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:26.907Z,1516404446.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:26.927Z,1516404446.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:27.302Z,1516404447.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:27.316Z,1516404447.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:27.686Z,1516404447.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:27.709Z,1516404447.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:28.091Z,1516404448.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:28.119Z,1516404448.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:28.501Z,1516404448.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:28.515Z,1516404448.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:28.898Z,1516404448.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:28.913Z,1516404448.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:29.303Z,1516404449.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:29.319Z,1516404449.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:29.705Z,1516404449.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:29.723Z,1516404449.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:30.105Z,1516404450.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:30.119Z,1516404450.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:30.495Z,1516404450.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:30.515Z,1516404450.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:30.891Z,1516404450.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:30.905Z,1516404450.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:31.290Z,1516404451.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:31.321Z,1516404451.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:31.694Z,1516404451.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:31.721Z,1516404451.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:32.091Z,1516404452.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:32.117Z,1516404452.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:32.510Z,1516404452.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:32.524Z,1516404452.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:32.910Z,1516404452.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:32.924Z,1516404452.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:33.301Z,1516404453.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:33.324Z,1516404453.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:33.691Z,1516404453.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:33.716Z,1516404453.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:34.087Z,1516404454.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:34.112Z,1516404454.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:34.484Z,1516404454.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:34.520Z,1516404454.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:34.891Z,1516404454.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:34.923Z,1516404454.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:35.306Z,1516404455.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:35.320Z,1516404455.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:35.710Z,1516404455.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:35.724Z,1516404455.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:36.110Z,1516404456.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:36.124Z,1516404456.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:36.487Z,1516404456.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:36.512Z,1516404456.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:36.883Z,1516404456.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:36.911Z,1516404456.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:37.291Z,1516404457.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:37.322Z,1516404457.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:37.692Z,1516404457.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:37.722Z,1516404457.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:38.083Z,1516404458.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:38.126Z,1516404458.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:38.511Z,1516404458.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:38.525Z,1516404458.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:38.910Z,1516404458.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:38.927Z,1516404458.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:39.293Z,1516404459.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:39.327Z,1516404459.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:39.691Z,1516404459.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:39.722Z,1516404459.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:40.087Z,1516404460.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:40.122Z,1516404460.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:40.492Z,1516404460.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:40.523Z,1516404460.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:40.891Z,1516404460.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:40.922Z,1516404460.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:41.298Z,1516404461.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:41.323Z,1516404461.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:41.698Z,1516404461.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:41.724Z,1516404461.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:42.110Z,1516404462.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:42.124Z,1516404462.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:42.487Z,1516404462.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:42.522Z,1516404462.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:42.891Z,1516404462.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:42.923Z,1516404462.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:43.287Z,1516404463.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:43.322Z,1516404463.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:43.692Z,1516404463.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:43.722Z,1516404463.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:44.083Z,1516404464.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:44.126Z,1516404464.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:44.510Z,1516404464.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:44.524Z,1516404464.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:44.906Z,1516404464.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:44.927Z,1516404464.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:45.293Z,1516404465.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:45.327Z,1516404465.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:45.691Z,1516404465.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:45.722Z,1516404465.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:46.091Z,1516404466.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:46.122Z,1516404466.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:46.492Z,1516404466.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:46.523Z,1516404466.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:46.891Z,1516404466.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:46.922Z,1516404466.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:47.310Z,1516404467.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:47.324Z,1516404467.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:47.698Z,1516404467.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:47.724Z,1516404467.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:50.791Z,1516404470.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:50.821Z,1516404470.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:50.911Z,1516404470.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:50.930Z,1516404470.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:51.279Z,1516404471.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:51.294Z,1516404471.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:51.686Z,1516404471.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:51.700Z,1516404471.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:52.084Z,1516404472.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:52.098Z,1516404472.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:52.498Z,1516404472.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:52.527Z,1516404472.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:52.890Z,1516404472.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:52.904Z,1516404472.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:53.286Z,1516404473.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:53.300Z,1516404473.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:53.678Z,1516404473.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:53.697Z,1516404473.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:54.079Z,1516404474.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:54.099Z,1516404474.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:54.474Z,1516404474.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:54.495Z,1516404474.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:54.880Z,1516404474.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:54.899Z,1516404474.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:55.287Z,1516404475.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:55.302Z,1516404475.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:55.691Z,1516404475.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:55.727Z,1516404475.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:56.089Z,1516404476.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:56.133Z,1516404476.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:56.476Z,1516404476.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:56.491Z,1516404476.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:56.491Z,1516404476.491 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-01-19T23:27:56.491Z,1516404476.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:27:56.493Z,1516404476.493 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:56.493Z,1516404476.493 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-01-19T23:27:56.494Z,1516404476.494 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:27:56.495Z,1516404476.495 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:56.495Z,1516404476.495 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46
2018-01-19T23:27:56.495Z,1516404476.495 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:27:56.507Z,1516404476.507 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:27:56.507Z,1516404476.507 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:27:56.508Z,1516404476.508 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:27:56.877Z,1516404476.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:56.915Z,1516404476.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:27:56.915Z,1516404476.915 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-01-19T23:27:56.915Z,1516404476.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:27:56.915Z,1516404476.915 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-01-19T23:27:56.916Z,1516404476.916 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:27:56.916Z,1516404476.916 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46
2018-01-19T23:27:57.283Z,1516404477.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:57.297Z,1516404477.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:27:57.298Z,1516404477.298 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:27:57.298Z,1516404477.298 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:27:57.299Z,1516404477.299 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:27:57.299Z,1516404477.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:27:57.299Z,1516404477.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:27:57.300Z,1516404477.300 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:27:57.300Z,1516404477.300 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:27:57.300Z,1516404477.300 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:27:57.682Z,1516404477.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:57.696Z,1516404477.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:27:57.698Z,1516404477.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:58.068Z,1516404478.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:58.099Z,1516404478.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:27:58.100Z,1516404478.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:58.494Z,1516404478.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:58.508Z,1516404478.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:27:58.510Z,1516404478.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:58.894Z,1516404478.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:58.908Z,1516404478.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:27:58.909Z,1516404478.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:59.293Z,1516404479.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:59.307Z,1516404479.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:27:59.308Z,1516404479.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:27:59.674Z,1516404479.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:27:59.700Z,1516404479.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:27:59.705Z,1516404479.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:00.086Z,1516404480.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:00.099Z,1516404480.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:28:00.100Z,1516404480.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:00.472Z,1516404480.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:00.506Z,1516404480.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:28:00.507Z,1516404480.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:00.882Z,1516404480.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:00.896Z,1516404480.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:28:00.897Z,1516404480.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:01.291Z,1516404481.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:01.305Z,1516404481.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:28:01.306Z,1516404481.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:01.715Z,1516404481.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:01.745Z,1516404481.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-01-19T23:28:01.746Z,1516404481.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:02.094Z,1516404482.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:02.108Z,1516404482.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:28:02.109Z,1516404482.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:02.489Z,1516404482.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:02.545Z,1516404482.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-01-19T23:28:02.546Z,1516404482.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:02.882Z,1516404482.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:02.900Z,1516404482.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:28:02.901Z,1516404482.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:03.278Z,1516404483.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:03.299Z,1516404483.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:28:03.300Z,1516404483.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:03.672Z,1516404483.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:03.704Z,1516404483.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:28:03.705Z,1516404483.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:04.084Z,1516404484.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:04.098Z,1516404484.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:28:04.099Z,1516404484.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:04.486Z,1516404484.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:04.504Z,1516404484.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:28:04.509Z,1516404484.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:04.899Z,1516404484.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:04.912Z,1516404484.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:28:04.913Z,1516404484.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:05.298Z,1516404485.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:05.312Z,1516404485.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:28:05.313Z,1516404485.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:05.675Z,1516404485.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:05.706Z,1516404485.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:28:05.707Z,1516404485.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:06.071Z,1516404486.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:06.098Z,1516404486.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:28:06.099Z,1516404486.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:06.488Z,1516404486.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:06.506Z,1516404486.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:28:06.507Z,1516404486.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:06.886Z,1516404486.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:06.901Z,1516404486.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:28:06.902Z,1516404486.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:07.295Z,1516404487.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:07.309Z,1516404487.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:28:07.310Z,1516404487.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:07.694Z,1516404487.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:07.715Z,1516404487.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:28:07.715Z,1516404487.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:08.092Z,1516404488.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:08.107Z,1516404488.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:28:08.108Z,1516404488.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:08.487Z,1516404488.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:08.500Z,1516404488.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:28:08.501Z,1516404488.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:08.875Z,1516404488.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:08.900Z,1516404488.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:28:08.901Z,1516404488.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:09.297Z,1516404489.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:09.311Z,1516404489.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:28:09.312Z,1516404489.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:09.699Z,1516404489.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:09.712Z,1516404489.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:28:09.713Z,1516404489.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:10.094Z,1516404490.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:10.108Z,1516404490.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:28:10.109Z,1516404490.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:10.473Z,1516404490.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:10.507Z,1516404490.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:28:10.508Z,1516404490.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:10.871Z,1516404490.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:10.897Z,1516404490.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:28:10.898Z,1516404490.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:11.295Z,1516404491.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:11.310Z,1516404491.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:28:11.310Z,1516404491.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:11.694Z,1516404491.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:11.708Z,1516404491.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:28:11.709Z,1516404491.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:12.087Z,1516404492.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:12.100Z,1516404492.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:28:12.101Z,1516404492.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:12.472Z,1516404492.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:12.502Z,1516404492.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:28:12.503Z,1516404492.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:12.871Z,1516404492.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:12.906Z,1516404492.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:28:12.907Z,1516404492.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:13.280Z,1516404493.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:13.318Z,1516404493.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:28:13.319Z,1516404493.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:13.682Z,1516404493.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:13.708Z,1516404493.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:28:13.708Z,1516404493.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:14.102Z,1516404494.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:14.122Z,1516404494.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:28:14.123Z,1516404494.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:14.477Z,1516404494.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:14.505Z,1516404494.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:28:14.506Z,1516404494.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:14.877Z,1516404494.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:14.904Z,1516404494.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:28:14.905Z,1516404494.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:15.282Z,1516404495.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:15.315Z,1516404495.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T23:28:15.316Z,1516404495.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:15.698Z,1516404495.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:15.712Z,1516404495.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T23:28:15.713Z,1516404495.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:16.097Z,1516404496.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:16.111Z,1516404496.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:28:16.111Z,1516404496.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:16.474Z,1516404496.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:16.510Z,1516404496.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:16.874Z,1516404496.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:16.888Z,1516404496.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:17.286Z,1516404497.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:17.315Z,1516404497.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:17.706Z,1516404497.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:17.727Z,1516404497.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:18.096Z,1516404498.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:18.110Z,1516404498.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:18.475Z,1516404498.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:18.501Z,1516404498.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:18.877Z,1516404498.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:18.891Z,1516404498.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:19.288Z,1516404499.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:19.314Z,1516404499.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:19.695Z,1516404499.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:19.723Z,1516404499.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:20.104Z,1516404500.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:20.118Z,1516404500.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:20.479Z,1516404500.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:20.493Z,1516404500.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:20.879Z,1516404500.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:20.922Z,1516404500.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:21.292Z,1516404501.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:21.307Z,1516404501.307 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2018-01-19T23:28:21.335Z,1516404501.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:21.691Z,1516404501.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:21.715Z,1516404501.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:22.086Z,1516404502.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:22.117Z,1516404502.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:22.477Z,1516404502.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:22.522Z,1516404502.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:22.880Z,1516404502.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:22.920Z,1516404502.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:23.291Z,1516404503.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:23.314Z,1516404503.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:23.690Z,1516404503.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:23.714Z,1516404503.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:24.082Z,1516404504.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:24.114Z,1516404504.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:24.480Z,1516404504.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:24.518Z,1516404504.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:24.873Z,1516404504.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:24.890Z,1516404504.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:25.280Z,1516404505.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:25.298Z,1516404505.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:25.690Z,1516404505.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:25.727Z,1516404505.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:26.087Z,1516404506.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:26.096Z,1516404506.096 [PNI_TCM](ERROR): CRC does not match. Expected:0x25097 got:0x19260
2018-01-19T23:28:26.127Z,1516404506.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:26.482Z,1516404506.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:26.496Z,1516404506.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:26.883Z,1516404506.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:26.897Z,1516404506.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:27.286Z,1516404507.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:27.321Z,1516404507.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:27.692Z,1516404507.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:27.723Z,1516404507.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:28.092Z,1516404508.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:28.122Z,1516404508.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:28.483Z,1516404508.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:28.497Z,1516404508.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:28.880Z,1516404508.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:28.924Z,1516404508.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:29.291Z,1516404509.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:29.324Z,1516404509.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:29.696Z,1516404509.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:29.726Z,1516404509.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:30.095Z,1516404510.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:30.108Z,1516404510.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:30.482Z,1516404510.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:30.523Z,1516404510.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:30.881Z,1516404510.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:30.898Z,1516404510.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:31.296Z,1516404511.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:31.331Z,1516404511.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:31.695Z,1516404511.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:31.726Z,1516404511.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:32.094Z,1516404512.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:32.131Z,1516404512.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:32.480Z,1516404512.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:32.495Z,1516404512.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:32.879Z,1516404512.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:32.897Z,1516404512.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:33.285Z,1516404513.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:33.299Z,1516404513.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:33.682Z,1516404513.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:33.724Z,1516404513.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:34.094Z,1516404514.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:34.130Z,1516404514.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:34.479Z,1516404514.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:34.501Z,1516404514.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:34.876Z,1516404514.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:34.894Z,1516404514.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:35.282Z,1516404515.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:35.296Z,1516404515.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:35.687Z,1516404515.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:35.703Z,1516404515.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:36.086Z,1516404516.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:36.129Z,1516404516.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:36.468Z,1516404516.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:36.500Z,1516404516.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:36.884Z,1516404516.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:36.903Z,1516404516.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:37.285Z,1516404517.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:37.298Z,1516404517.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:37.696Z,1516404517.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:37.725Z,1516404517.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:38.095Z,1516404518.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:38.115Z,1516404518.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:38.494Z,1516404518.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:38.538Z,1516404518.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:38.877Z,1516404518.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:38.895Z,1516404518.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:39.274Z,1516404519.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:39.300Z,1516404519.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:39.686Z,1516404519.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:39.703Z,1516404519.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:40.083Z,1516404520.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:40.115Z,1516404520.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:40.494Z,1516404520.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:40.518Z,1516404520.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:40.899Z,1516404520.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:40.916Z,1516404520.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:41.282Z,1516404521.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:41.314Z,1516404521.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:41.675Z,1516404521.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:41.726Z,1516404521.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:42.072Z,1516404522.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:42.099Z,1516404522.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:42.466Z,1516404522.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:42.492Z,1516404522.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:42.873Z,1516404522.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:42.909Z,1516404522.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:43.276Z,1516404523.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:43.307Z,1516404523.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:43.695Z,1516404523.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:43.718Z,1516404523.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:44.095Z,1516404524.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:44.113Z,1516404524.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:44.526Z,1516404524.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:44.553Z,1516404524.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:44.907Z,1516404524.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:44.970Z,1516404524.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:45.278Z,1516404525.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:45.292Z,1516404525.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:45.682Z,1516404525.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:45.726Z,1516404525.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:46.078Z,1516404526.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:46.126Z,1516404526.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:46.522Z,1516404526.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:46.549Z,1516404526.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:46.888Z,1516404526.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:46.947Z,1516404526.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:47.285Z,1516404527.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:47.303Z,1516404527.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:47.689Z,1516404527.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:47.738Z,1516404527.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:48.083Z,1516404528.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:48.142Z,1516404528.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:54.742Z,1516404534.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:54.786Z,1516404534.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:54.874Z,1516404534.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:54.911Z,1516404534.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:55.284Z,1516404535.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:55.339Z,1516404535.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:55.711Z,1516404535.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:55.737Z,1516404535.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:56.082Z,1516404536.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:56.115Z,1516404536.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:56.470Z,1516404536.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:56.484Z,1516404536.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:56.869Z,1516404536.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:56.887Z,1516404536.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:57.272Z,1516404537.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:57.286Z,1516404537.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:57.678Z,1516404537.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:57.692Z,1516404537.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:58.082Z,1516404538.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:58.099Z,1516404538.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:58.478Z,1516404538.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:58.499Z,1516404538.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:58.859Z,1516404538.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:58.895Z,1516404538.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:59.261Z,1516404539.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:59.283Z,1516404539.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:28:59.668Z,1516404539.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:28:59.698Z,1516404539.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:00.059Z,1516404540.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:00.102Z,1516404540.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:00.474Z,1516404540.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:00.511Z,1516404540.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:00.882Z,1516404540.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:00.911Z,1516404540.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:01.273Z,1516404541.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:01.309Z,1516404541.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:01.667Z,1516404541.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:01.703Z,1516404541.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:02.071Z,1516404542.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:02.107Z,1516404542.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:02.471Z,1516404542.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:02.485Z,1516404542.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:02.872Z,1516404542.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:02.886Z,1516404542.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:03.270Z,1516404543.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:03.284Z,1516404543.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:03.670Z,1516404543.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:03.684Z,1516404543.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:04.086Z,1516404544.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:04.116Z,1516404544.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:04.478Z,1516404544.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:04.492Z,1516404544.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:04.873Z,1516404544.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:04.886Z,1516404544.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:05.269Z,1516404545.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:05.283Z,1516404545.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:05.670Z,1516404545.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:05.684Z,1516404545.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:06.072Z,1516404546.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:06.086Z,1516404546.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:06.474Z,1516404546.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:06.488Z,1516404546.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:06.886Z,1516404546.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:06.917Z,1516404546.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:07.274Z,1516404547.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:07.294Z,1516404547.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:07.673Z,1516404547.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:07.687Z,1516404547.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:08.073Z,1516404548.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:08.087Z,1516404548.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:08.472Z,1516404548.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:08.486Z,1516404548.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:08.868Z,1516404548.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:08.887Z,1516404548.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:09.276Z,1516404549.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:09.290Z,1516404549.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:09.679Z,1516404549.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:09.699Z,1516404549.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:10.077Z,1516404550.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:10.091Z,1516404550.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:10.476Z,1516404550.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:10.490Z,1516404550.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:10.868Z,1516404550.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:10.882Z,1516404550.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:11.268Z,1516404551.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:11.287Z,1516404551.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:11.670Z,1516404551.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:11.689Z,1516404551.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:12.068Z,1516404552.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:12.082Z,1516404552.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:12.477Z,1516404552.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:12.492Z,1516404552.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:12.882Z,1516404552.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:12.897Z,1516404552.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:12.930Z,1516404552.930 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T23:29:13.278Z,1516404553.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:13.292Z,1516404553.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:13.670Z,1516404553.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:13.689Z,1516404553.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:14.072Z,1516404554.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:14.086Z,1516404554.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:14.471Z,1516404554.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:14.496Z,1516404554.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:14.876Z,1516404554.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:14.891Z,1516404554.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:15.271Z,1516404555.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:15.291Z,1516404555.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:15.682Z,1516404555.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:15.696Z,1516404555.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:16.082Z,1516404556.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:16.096Z,1516404556.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:16.481Z,1516404556.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:16.495Z,1516404556.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:16.875Z,1516404556.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:16.890Z,1516404556.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:17.268Z,1516404557.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:17.295Z,1516404557.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:17.677Z,1516404557.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:17.691Z,1516404557.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:18.059Z,1516404558.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:18.094Z,1516404558.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:18.481Z,1516404558.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:18.496Z,1516404558.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:18.885Z,1516404558.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:18.907Z,1516404558.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:19.290Z,1516404559.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:19.304Z,1516404559.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:19.676Z,1516404559.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:19.690Z,1516404559.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:20.064Z,1516404560.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:20.089Z,1516404560.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:20.459Z,1516404560.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:20.492Z,1516404560.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:20.860Z,1516404560.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:20.886Z,1516404560.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:21.263Z,1516404561.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:21.295Z,1516404561.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:21.686Z,1516404561.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:21.700Z,1516404561.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:22.090Z,1516404562.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:22.104Z,1516404562.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:22.486Z,1516404562.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:22.500Z,1516404562.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:22.876Z,1516404562.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:22.890Z,1516404562.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:23.261Z,1516404563.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:23.287Z,1516404563.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:23.668Z,1516404563.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:23.693Z,1516404563.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:24.059Z,1516404564.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:24.096Z,1516404564.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:24.478Z,1516404564.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:24.492Z,1516404564.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:24.886Z,1516404564.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:24.900Z,1516404564.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:25.286Z,1516404565.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:25.300Z,1516404565.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:25.663Z,1516404565.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:25.688Z,1516404565.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:26.063Z,1516404566.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:26.088Z,1516404566.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:26.459Z,1516404566.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:26.495Z,1516404566.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:26.868Z,1516404566.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:26.893Z,1516404566.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:27.280Z,1516404567.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:27.314Z,1516404567.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:27.686Z,1516404567.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:27.700Z,1516404567.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:28.090Z,1516404568.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:28.111Z,1516404568.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:28.474Z,1516404568.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:28.507Z,1516404568.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:28.867Z,1516404568.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:28.905Z,1516404568.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:29.261Z,1516404569.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:29.275Z,1516404569.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:29.668Z,1516404569.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:29.682Z,1516404569.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:30.071Z,1516404570.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:30.085Z,1516404570.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:30.478Z,1516404570.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:30.492Z,1516404570.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:30.886Z,1516404570.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:30.916Z,1516404570.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:31.278Z,1516404571.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:31.316Z,1516404571.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:31.668Z,1516404571.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:31.687Z,1516404571.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:32.070Z,1516404572.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:32.084Z,1516404572.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:32.471Z,1516404572.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:32.485Z,1516404572.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:32.873Z,1516404572.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:32.887Z,1516404572.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:33.269Z,1516404573.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:33.287Z,1516404573.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:33.674Z,1516404573.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:33.688Z,1516404573.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:34.086Z,1516404574.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:34.100Z,1516404574.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:34.478Z,1516404574.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:34.492Z,1516404574.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:34.876Z,1516404574.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:34.890Z,1516404574.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:35.269Z,1516404575.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:35.283Z,1516404575.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:35.667Z,1516404575.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:35.688Z,1516404575.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:36.076Z,1516404576.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:36.090Z,1516404576.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:36.477Z,1516404576.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:36.492Z,1516404576.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:36.890Z,1516404576.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:36.904Z,1516404576.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:37.282Z,1516404577.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:37.303Z,1516404577.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:37.674Z,1516404577.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:37.688Z,1516404577.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:38.071Z,1516404578.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:38.085Z,1516404578.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:38.472Z,1516404578.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:38.486Z,1516404578.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:38.862Z,1516404578.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:38.893Z,1516404578.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:39.275Z,1516404579.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:39.289Z,1516404579.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:39.682Z,1516404579.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:39.696Z,1516404579.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:40.082Z,1516404580.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:40.096Z,1516404580.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:40.480Z,1516404580.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:40.499Z,1516404580.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:40.876Z,1516404580.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:40.890Z,1516404580.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:41.275Z,1516404581.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:41.295Z,1516404581.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:41.676Z,1516404581.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:41.690Z,1516404581.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:42.072Z,1516404582.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:42.091Z,1516404582.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:42.477Z,1516404582.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:42.491Z,1516404582.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:42.882Z,1516404582.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:42.896Z,1516404582.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:43.282Z,1516404583.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:43.296Z,1516404583.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:43.671Z,1516404583.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:43.685Z,1516404583.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:44.066Z,1516404584.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:44.088Z,1516404584.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:44.481Z,1516404584.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:44.503Z,1516404584.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:44.876Z,1516404584.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:44.895Z,1516404584.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:45.266Z,1516404585.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:45.288Z,1516404585.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:45.683Z,1516404585.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:45.697Z,1516404585.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:46.081Z,1516404586.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:46.103Z,1516404586.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:46.482Z,1516404586.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:46.496Z,1516404586.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:46.877Z,1516404586.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:46.898Z,1516404586.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:47.275Z,1516404587.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:47.295Z,1516404587.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:47.680Z,1516404587.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:47.695Z,1516404587.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:48.074Z,1516404588.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:48.088Z,1516404588.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:48.475Z,1516404588.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:48.501Z,1516404588.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:51.586Z,1516404591.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:51.601Z,1516404591.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:51.714Z,1516404591.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:51.755Z,1516404591.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:52.050Z,1516404592.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:52.084Z,1516404592.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:52.460Z,1516404592.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:52.491Z,1516404592.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:52.857Z,1516404592.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:52.884Z,1516404592.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:53.255Z,1516404593.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:53.284Z,1516404593.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:53.661Z,1516404593.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:53.682Z,1516404593.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:54.071Z,1516404594.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:54.086Z,1516404594.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:54.477Z,1516404594.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:54.491Z,1516404594.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:54.853Z,1516404594.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:54.887Z,1516404594.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:55.245Z,1516404595.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:55.287Z,1516404595.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:55.649Z,1516404595.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:55.663Z,1516404595.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:56.049Z,1516404596.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:56.063Z,1516404596.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:56.462Z,1516404596.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:56.493Z,1516404596.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:56.866Z,1516404596.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:56.896Z,1516404596.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:57.270Z,1516404597.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:57.303Z,1516404597.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:57.645Z,1516404597.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:57.675Z,1516404597.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:58.057Z,1516404598.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:58.071Z,1516404598.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:58.456Z,1516404598.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:58.471Z,1516404598.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:58.857Z,1516404598.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:58.872Z,1516404598.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:59.256Z,1516404599.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:59.271Z,1516404599.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:29:59.671Z,1516404599.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:29:59.700Z,1516404599.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:00.070Z,1516404600.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:00.098Z,1516404600.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:00.458Z,1516404600.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:00.472Z,1516404600.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:00.856Z,1516404600.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:00.870Z,1516404600.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:01.246Z,1516404601.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:01.266Z,1516404601.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:01.655Z,1516404601.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:01.669Z,1516404601.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:02.052Z,1516404602.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:02.066Z,1516404602.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:02.458Z,1516404602.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:02.472Z,1516404602.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:02.870Z,1516404602.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:02.900Z,1516404602.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:03.270Z,1516404603.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:03.284Z,1516404603.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:03.648Z,1516404603.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:03.666Z,1516404603.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:04.052Z,1516404604.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:04.078Z,1516404604.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:04.460Z,1516404604.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:04.474Z,1516404604.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:04.860Z,1516404604.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:04.875Z,1516404604.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:05.254Z,1516404605.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:05.272Z,1516404605.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:05.662Z,1516404605.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:05.676Z,1516404605.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:06.065Z,1516404606.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:06.087Z,1516404606.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:06.464Z,1516404606.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:06.483Z,1516404606.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:06.861Z,1516404606.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:06.874Z,1516404606.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:07.253Z,1516404607.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:07.267Z,1516404607.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:07.651Z,1516404607.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:07.673Z,1516404607.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:08.055Z,1516404608.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:08.074Z,1516404608.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:08.465Z,1516404608.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:08.479Z,1516404608.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:08.864Z,1516404608.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:08.883Z,1516404608.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:09.265Z,1516404609.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:09.279Z,1516404609.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:09.660Z,1516404609.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:09.675Z,1516404609.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:10.054Z,1516404610.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:10.072Z,1516404610.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:10.462Z,1516404610.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:10.476Z,1516404610.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:10.866Z,1516404610.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:10.880Z,1516404610.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:11.265Z,1516404611.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:11.279Z,1516404611.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:11.661Z,1516404611.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:11.675Z,1516404611.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:12.085Z,1516404612.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:12.118Z,1516404612.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:12.464Z,1516404612.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:12.483Z,1516404612.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:12.865Z,1516404612.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:12.879Z,1516404612.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:13.265Z,1516404613.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:13.279Z,1516404613.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:13.654Z,1516404613.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:13.673Z,1516404613.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:14.056Z,1516404614.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:14.074Z,1516404614.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:14.465Z,1516404614.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:14.479Z,1516404614.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:14.863Z,1516404614.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:14.883Z,1516404614.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:15.265Z,1516404615.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:15.279Z,1516404615.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:15.660Z,1516404615.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:15.675Z,1516404615.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:16.054Z,1516404616.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:16.072Z,1516404616.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:16.462Z,1516404616.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:16.476Z,1516404616.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:16.866Z,1516404616.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:16.880Z,1516404616.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:17.265Z,1516404617.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:17.279Z,1516404617.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:17.653Z,1516404617.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:17.667Z,1516404617.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:18.077Z,1516404618.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:18.104Z,1516404618.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:18.466Z,1516404618.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:18.480Z,1516404618.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:18.866Z,1516404618.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:18.886Z,1516404618.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:19.266Z,1516404619.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:19.280Z,1516404619.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:19.648Z,1516404619.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:19.678Z,1516404619.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:20.047Z,1516404620.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:20.082Z,1516404620.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:20.458Z,1516404620.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:20.479Z,1516404620.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:20.866Z,1516404620.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:20.884Z,1516404620.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:21.269Z,1516404621.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:21.283Z,1516404621.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:21.646Z,1516404621.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:21.672Z,1516404621.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:22.051Z,1516404622.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:22.082Z,1516404622.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:22.454Z,1516404622.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:22.487Z,1516404622.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:22.874Z,1516404622.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:22.888Z,1516404622.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:23.258Z,1516404623.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:23.295Z,1516404623.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:23.652Z,1516404623.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:23.688Z,1516404623.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:24.055Z,1516404624.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:24.084Z,1516404624.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:24.472Z,1516404624.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:24.491Z,1516404624.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:24.871Z,1516404624.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:24.885Z,1516404624.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:25.262Z,1516404625.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:25.292Z,1516404625.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:25.660Z,1516404625.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:25.683Z,1516404625.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:26.053Z,1516404626.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:26.083Z,1516404626.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:26.458Z,1516404626.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:26.478Z,1516404626.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:26.872Z,1516404626.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:26.887Z,1516404626.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:27.274Z,1516404627.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:27.288Z,1516404627.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:27.650Z,1516404627.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:27.664Z,1516404627.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:28.052Z,1516404628.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:28.066Z,1516404628.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:28.466Z,1516404628.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:28.491Z,1516404628.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:28.863Z,1516404628.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:28.893Z,1516404628.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:29.267Z,1516404629.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:29.288Z,1516404629.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:29.654Z,1516404629.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:29.669Z,1516404629.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:30.056Z,1516404630.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:30.071Z,1516404630.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:30.467Z,1516404630.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:30.498Z,1516404630.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:30.862Z,1516404630.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:30.889Z,1516404630.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:31.255Z,1516404631.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:31.269Z,1516404631.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:31.656Z,1516404631.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:31.670Z,1516404631.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:32.053Z,1516404632.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:32.067Z,1516404632.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:32.454Z,1516404632.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:32.469Z,1516404632.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:32.866Z,1516404632.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:32.880Z,1516404632.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:33.270Z,1516404633.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:33.304Z,1516404633.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:33.649Z,1516404633.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:33.663Z,1516404633.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:34.058Z,1516404634.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:34.072Z,1516404634.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:34.453Z,1516404634.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:34.467Z,1516404634.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:34.857Z,1516404634.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:34.875Z,1516404634.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:35.270Z,1516404635.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:35.284Z,1516404635.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:35.663Z,1516404635.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:35.676Z,1516404635.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:36.060Z,1516404636.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:36.074Z,1516404636.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:36.456Z,1516404636.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:36.470Z,1516404636.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:36.852Z,1516404636.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:36.867Z,1516404636.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:37.250Z,1516404637.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:37.265Z,1516404637.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:37.666Z,1516404637.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:37.680Z,1516404637.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:38.065Z,1516404638.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:38.080Z,1516404638.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:38.461Z,1516404638.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:38.476Z,1516404638.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:38.859Z,1516404638.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:38.879Z,1516404638.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:39.260Z,1516404639.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:39.274Z,1516404639.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:39.653Z,1516404639.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:39.667Z,1516404639.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:40.052Z,1516404640.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:40.078Z,1516404640.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:40.460Z,1516404640.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:40.473Z,1516404640.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:40.869Z,1516404640.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:40.891Z,1516404640.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:41.269Z,1516404641.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:41.291Z,1516404641.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:41.670Z,1516404641.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:41.684Z,1516404641.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:42.054Z,1516404642.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:42.069Z,1516404642.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:42.454Z,1516404642.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:42.472Z,1516404642.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:42.844Z,1516404642.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:42.879Z,1516404642.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:43.250Z,1516404643.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:43.280Z,1516404643.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:43.666Z,1516404643.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:43.680Z,1516404643.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:44.069Z,1516404644.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:44.083Z,1516404644.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:44.459Z,1516404644.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:44.485Z,1516404644.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:44.858Z,1516404644.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:44.876Z,1516404644.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:45.243Z,1516404645.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:45.275Z,1516404645.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:45.641Z,1516404645.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:45.675Z,1516404645.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:46.048Z,1516404646.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:46.074Z,1516404646.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:46.451Z,1516404646.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:46.477Z,1516404646.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:46.870Z,1516404646.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:46.884Z,1516404646.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:47.270Z,1516404647.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:47.284Z,1516404647.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:47.668Z,1516404647.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:47.686Z,1516404647.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:48.041Z,1516404648.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:48.055Z,1516404648.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:48.451Z,1516404648.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:48.482Z,1516404648.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:48.849Z,1516404648.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:48.883Z,1516404648.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:51.944Z,1516404651.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:51.963Z,1516404651.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:52.087Z,1516404652.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:52.124Z,1516404652.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:52.454Z,1516404652.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:52.484Z,1516404652.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:52.858Z,1516404652.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:52.888Z,1516404652.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:53.244Z,1516404653.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:53.263Z,1516404653.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:53.644Z,1516404653.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:53.659Z,1516404653.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:54.041Z,1516404654.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:54.055Z,1516404654.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:54.441Z,1516404654.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:54.459Z,1516404654.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:54.858Z,1516404654.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:54.893Z,1516404654.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:55.249Z,1516404655.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:55.263Z,1516404655.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:55.647Z,1516404655.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:55.667Z,1516404655.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:56.047Z,1516404656.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:56.061Z,1516404656.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:56.441Z,1516404656.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:56.455Z,1516404656.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:56.843Z,1516404656.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:56.861Z,1516404656.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:57.248Z,1516404657.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:57.262Z,1516404657.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:57.649Z,1516404657.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:57.663Z,1516404657.663 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:57.663Z,1516404657.663 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-01-19T23:30:57.664Z,1516404657.664 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:30:57.665Z,1516404657.665 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:57.666Z,1516404657.666 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-01-19T23:30:57.666Z,1516404657.666 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:30:57.667Z,1516404657.667 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:57.667Z,1516404657.667 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47
2018-01-19T23:30:57.667Z,1516404657.667 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:30:57.692Z,1516404657.692 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:30:57.692Z,1516404657.692 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:30:57.692Z,1516404657.692 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:30:58.062Z,1516404658.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:58.106Z,1516404658.106 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:30:58.106Z,1516404658.106 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-01-19T23:30:58.107Z,1516404658.107 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:30:58.107Z,1516404658.107 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-01-19T23:30:58.107Z,1516404658.107 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:30:58.107Z,1516404658.107 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47
2018-01-19T23:30:58.454Z,1516404658.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:58.467Z,1516404658.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:30:58.467Z,1516404658.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:30:58.468Z,1516404658.468 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:30:58.468Z,1516404658.468 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:30:58.468Z,1516404658.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:30:58.469Z,1516404658.469 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:30:58.469Z,1516404658.469 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:30:58.470Z,1516404658.470 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:30:58.470Z,1516404658.470 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:30:58.835Z,1516404658.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:58.865Z,1516404658.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:30:58.866Z,1516404658.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:59.239Z,1516404659.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:59.264Z,1516404659.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:30:59.265Z,1516404659.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:30:59.635Z,1516404659.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:30:59.661Z,1516404659.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:30:59.662Z,1516404659.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:00.058Z,1516404660.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:00.110Z,1516404660.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:31:00.110Z,1516404660.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:00.435Z,1516404660.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:00.460Z,1516404660.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:31:00.460Z,1516404660.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:00.854Z,1516404660.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:00.868Z,1516404660.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:31:00.869Z,1516404660.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:01.254Z,1516404661.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:01.268Z,1516404661.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:31:01.269Z,1516404661.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:01.654Z,1516404661.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:01.668Z,1516404661.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:31:01.669Z,1516404661.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:02.035Z,1516404662.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:02.061Z,1516404662.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:31:02.062Z,1516404662.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:02.431Z,1516404662.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:02.457Z,1516404662.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:31:02.458Z,1516404662.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:02.836Z,1516404662.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:02.858Z,1516404662.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:31:02.859Z,1516404662.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:03.235Z,1516404663.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:03.271Z,1516404663.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:31:03.271Z,1516404663.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:03.646Z,1516404663.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:03.675Z,1516404663.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:31:03.676Z,1516404663.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:04.063Z,1516404664.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:04.076Z,1516404664.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:31:04.078Z,1516404664.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:04.446Z,1516404664.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:04.472Z,1516404664.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:31:04.473Z,1516404664.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:04.843Z,1516404664.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:04.877Z,1516404664.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:31:04.878Z,1516404664.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:05.236Z,1516404665.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:05.250Z,1516404665.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:31:05.251Z,1516404665.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:05.640Z,1516404665.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:05.654Z,1516404665.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:31:05.655Z,1516404665.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:06.041Z,1516404666.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:06.055Z,1516404666.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:31:06.056Z,1516404666.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:06.448Z,1516404666.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:06.462Z,1516404666.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:31:06.463Z,1516404666.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:06.858Z,1516404666.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:06.889Z,1516404666.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:31:06.890Z,1516404666.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:07.247Z,1516404667.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:07.261Z,1516404667.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:31:07.262Z,1516404667.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:07.659Z,1516404667.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:07.687Z,1516404667.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:31:07.688Z,1516404667.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:08.039Z,1516404668.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:08.058Z,1516404668.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:31:08.059Z,1516404668.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:08.439Z,1516404668.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:08.454Z,1516404668.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:31:08.455Z,1516404668.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:08.843Z,1516404668.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:08.859Z,1516404668.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:31:08.860Z,1516404668.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:09.244Z,1516404669.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:09.259Z,1516404669.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:31:09.260Z,1516404669.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:09.649Z,1516404669.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:09.664Z,1516404669.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:31:09.665Z,1516404669.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:10.058Z,1516404670.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:10.087Z,1516404670.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:31:10.088Z,1516404670.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:10.457Z,1516404670.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:10.487Z,1516404670.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:31:10.488Z,1516404670.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:10.844Z,1516404670.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:10.858Z,1516404670.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:31:10.859Z,1516404670.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:11.241Z,1516404671.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:11.263Z,1516404671.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:31:11.264Z,1516404671.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:11.647Z,1516404671.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:11.660Z,1516404671.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:31:11.661Z,1516404671.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:12.041Z,1516404672.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:12.055Z,1516404672.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:31:12.056Z,1516404672.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:12.443Z,1516404672.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:12.457Z,1516404672.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:31:12.458Z,1516404672.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:12.849Z,1516404672.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:12.863Z,1516404672.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:31:12.864Z,1516404672.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:13.255Z,1516404673.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:13.268Z,1516404673.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:31:13.270Z,1516404673.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:13.648Z,1516404673.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:13.663Z,1516404673.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:31:13.664Z,1516404673.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:14.039Z,1516404674.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:14.052Z,1516404674.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:31:14.053Z,1516404674.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:14.440Z,1516404674.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:14.453Z,1516404674.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:31:14.454Z,1516404674.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:14.838Z,1516404674.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:14.867Z,1516404674.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:31:14.868Z,1516404674.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:15.246Z,1516404675.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:15.259Z,1516404675.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:31:15.260Z,1516404675.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:15.654Z,1516404675.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:15.668Z,1516404675.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:31:15.669Z,1516404675.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:16.050Z,1516404676.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:16.064Z,1516404676.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:31:16.065Z,1516404676.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:16.448Z,1516404676.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:16.466Z,1516404676.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T23:31:16.467Z,1516404676.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:16.842Z,1516404676.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:16.856Z,1516404676.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T23:31:16.857Z,1516404676.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:17.243Z,1516404677.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:17.256Z,1516404677.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:31:17.257Z,1516404677.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:17.639Z,1516404677.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:17.652Z,1516404677.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T23:31:17.653Z,1516404677.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:18.048Z,1516404678.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:18.062Z,1516404678.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:18.447Z,1516404678.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:18.461Z,1516404678.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:18.848Z,1516404678.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:18.866Z,1516404678.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:19.254Z,1516404679.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:19.268Z,1516404679.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:19.648Z,1516404679.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:19.667Z,1516404679.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:20.046Z,1516404680.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:20.060Z,1516404680.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:20.447Z,1516404680.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:20.462Z,1516404680.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:20.847Z,1516404680.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:20.867Z,1516404680.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:21.246Z,1516404681.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:21.260Z,1516404681.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:21.650Z,1516404681.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:21.664Z,1516404681.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:22.054Z,1516404682.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:22.068Z,1516404682.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:22.450Z,1516404682.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:22.470Z,1516404682.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:22.844Z,1516404682.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:22.858Z,1516404682.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:23.243Z,1516404683.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:23.263Z,1516404683.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:23.646Z,1516404683.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:23.666Z,1516404683.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:24.048Z,1516404684.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:24.062Z,1516404684.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:24.443Z,1516404684.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:24.463Z,1516404684.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:24.850Z,1516404684.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:24.864Z,1516404684.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:25.254Z,1516404685.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:25.268Z,1516404685.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:25.648Z,1516404685.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:25.667Z,1516404685.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:26.046Z,1516404686.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:26.060Z,1516404686.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:26.447Z,1516404686.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:26.461Z,1516404686.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:26.847Z,1516404686.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:26.862Z,1516404686.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:27.247Z,1516404687.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:27.261Z,1516404687.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:27.650Z,1516404687.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:27.664Z,1516404687.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:28.050Z,1516404688.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:28.064Z,1516404688.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:28.448Z,1516404688.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:28.466Z,1516404688.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:28.848Z,1516404688.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:28.867Z,1516404688.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:29.247Z,1516404689.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:29.267Z,1516404689.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:29.647Z,1516404689.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:29.660Z,1516404689.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:30.049Z,1516404690.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:30.063Z,1516404690.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:30.443Z,1516404690.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:30.457Z,1516404690.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:30.850Z,1516404690.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:30.864Z,1516404690.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:31.253Z,1516404691.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:31.275Z,1516404691.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:31.652Z,1516404691.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:31.671Z,1516404691.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:32.047Z,1516404692.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:32.060Z,1516404692.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:32.448Z,1516404692.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:32.462Z,1516404692.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:32.842Z,1516404692.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:32.861Z,1516404692.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:33.239Z,1516404693.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:33.252Z,1516404693.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:33.654Z,1516404693.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:33.668Z,1516404693.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:34.052Z,1516404694.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:34.071Z,1516404694.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:34.452Z,1516404694.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:34.466Z,1516404694.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:34.848Z,1516404694.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:34.867Z,1516404694.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:35.247Z,1516404695.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:35.267Z,1516404695.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:35.647Z,1516404695.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:35.660Z,1516404695.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:36.049Z,1516404696.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:36.063Z,1516404696.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:36.443Z,1516404696.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:36.457Z,1516404696.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:36.814Z,1516404696.814 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T23:31:36.814Z,1516404696.814 [NAL9602] Data Fault, FailCount= 3
2018-01-19T23:31:36.814Z,1516404696.814 [NAL9602](ERROR): Data Fault
2018-01-19T23:31:36.841Z,1516404696.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:36.875Z,1516404696.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:36.900Z,1516404696.900 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T23:31:37.218Z,1516404697.218 [NAL9602](INFO): Powering down
2018-01-19T23:31:37.242Z,1516404697.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:37.277Z,1516404697.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:37.647Z,1516404697.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:37.661Z,1516404697.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:38.042Z,1516404698.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:38.056Z,1516404698.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:38.069Z,1516404698.069 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T23:31:38.069Z,1516404698.069 [NAL9602] No Fault, FailCount= 3
2018-01-19T23:31:38.438Z,1516404698.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:38.460Z,1516404698.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:38.847Z,1516404698.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:38.861Z,1516404698.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:39.231Z,1516404699.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:39.265Z,1516404699.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:39.646Z,1516404699.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:39.660Z,1516404699.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:40.038Z,1516404700.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:40.060Z,1516404700.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:40.431Z,1516404700.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:40.456Z,1516404700.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:40.847Z,1516404700.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:40.861Z,1516404700.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:41.238Z,1516404701.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:41.260Z,1516404701.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:41.635Z,1516404701.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:41.668Z,1516404701.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:42.048Z,1516404702.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:42.062Z,1516404702.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:42.438Z,1516404702.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:42.460Z,1516404702.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:42.843Z,1516404702.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:42.857Z,1516404702.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:43.232Z,1516404703.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:43.267Z,1516404703.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:43.648Z,1516404703.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:43.667Z,1516404703.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:44.031Z,1516404704.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:44.057Z,1516404704.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:44.442Z,1516404704.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:44.461Z,1516404704.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:44.839Z,1516404704.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:44.862Z,1516404704.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:45.245Z,1516404705.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:45.262Z,1516404705.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:45.642Z,1516404705.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:45.660Z,1516404705.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:46.053Z,1516404706.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:46.067Z,1516404706.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:46.448Z,1516404706.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:46.462Z,1516404706.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:46.848Z,1516404706.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:46.863Z,1516404706.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:46.866Z,1516404706.866 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T23:26:46.6Z
2018-01-19T23:31:46.866Z,1516404706.866 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T23:31:46.866Z,1516404706.866 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T23:31:47.238Z,1516404707.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:47.263Z,1516404707.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:47.684Z,1516404707.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:47.706Z,1516404707.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:48.048Z,1516404708.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:48.063Z,1516404708.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:51.129Z,1516404711.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:51.153Z,1516404711.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:51.240Z,1516404711.240 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0056.lzma
2018-01-19T23:31:51.260Z,1516404711.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:51.275Z,1516404711.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:51.615Z,1516404711.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:51.635Z,1516404711.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:51.979Z,1516404711.979 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0056.lzma.bak
2018-01-19T23:31:51.979Z,1516404711.979 [DataOverHttps](INFO): SBD MOMSN=7724916
2018-01-19T23:31:52.021Z,1516404712.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:52.035Z,1516404712.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:52.499Z,1516404712.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:52.514Z,1516404712.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:52.808Z,1516404712.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:52.828Z,1516404712.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:55.938Z,1516404715.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:55.960Z,1516404715.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:56.060Z,1516404716.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:56.075Z,1516404716.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:56.421Z,1516404716.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:56.435Z,1516404716.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:56.816Z,1516404716.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:56.830Z,1516404716.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:57.211Z,1516404717.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:57.248Z,1516404717.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:31:57.615Z,1516404717.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:31:57.623Z,1516404717.623 [PNI_TCM](ERROR): CRC does not match. Expected:0x51456 got:0x6336
2018-01-19T23:31:57.660Z,1516404717.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:00.782Z,1516404720.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:00.804Z,1516404720.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:00.882Z,1516404720.882 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180119T210901/Express0057.lzma
2018-01-19T23:32:00.914Z,1516404720.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:00.928Z,1516404720.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:01.262Z,1516404721.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:01.276Z,1516404721.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:01.627Z,1516404721.627 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0057.lzma.bak
2018-01-19T23:32:01.627Z,1516404721.627 [DataOverHttps](INFO): SBD MOMSN=7724918
2018-01-19T23:32:01.662Z,1516404721.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:01.696Z,1516404721.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:02.148Z,1516404722.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:02.163Z,1516404722.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:02.166Z,1516404722.166 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T23:32:02.166Z,1516404722.166 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T23:32:02.166Z,1516404722.166 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T23:32:02.465Z,1516404722.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:02.479Z,1516404722.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:05.551Z,1516404725.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:05.564Z,1516404725.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:05.663Z,1516404725.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:05.677Z,1516404725.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:06.014Z,1516404726.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:06.031Z,1516404726.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:06.417Z,1516404726.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:06.434Z,1516404726.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:06.812Z,1516404726.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:06.857Z,1516404726.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:07.223Z,1516404727.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:07.240Z,1516404727.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:07.602Z,1516404727.602 [NAL9602](INFO): Powering up NAL9602
2018-01-19T23:32:07.622Z,1516404727.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:07.637Z,1516404727.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:08.016Z,1516404728.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:08.031Z,1516404728.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:08.415Z,1516404728.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:08.441Z,1516404728.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:08.816Z,1516404728.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:08.834Z,1516404728.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:09.216Z,1516404729.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:09.234Z,1516404729.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:09.618Z,1516404729.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:09.632Z,1516404729.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:10.016Z,1516404730.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:10.060Z,1516404730.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:10.412Z,1516404730.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:10.426Z,1516404730.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:10.814Z,1516404730.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:10.832Z,1516404730.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:11.219Z,1516404731.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:11.234Z,1516404731.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:11.614Z,1516404731.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:11.660Z,1516404731.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:12.016Z,1516404732.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:12.030Z,1516404732.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:12.416Z,1516404732.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:12.435Z,1516404732.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:12.818Z,1516404732.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:12.834Z,1516404732.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:13.216Z,1516404733.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:13.239Z,1516404733.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:13.615Z,1516404733.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:13.635Z,1516404733.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:14.020Z,1516404734.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:14.038Z,1516404734.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:14.421Z,1516404734.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:14.437Z,1516404734.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:14.820Z,1516404734.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:14.870Z,1516404734.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:15.215Z,1516404735.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:15.229Z,1516404735.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:15.620Z,1516404735.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:15.638Z,1516404735.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:16.022Z,1516404736.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:16.038Z,1516404736.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:16.420Z,1516404736.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:16.462Z,1516404736.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:16.817Z,1516404736.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:16.835Z,1516404736.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:17.211Z,1516404737.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:17.248Z,1516404737.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:17.615Z,1516404737.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:17.644Z,1516404737.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:18.011Z,1516404738.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:18.057Z,1516404738.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:18.434Z,1516404738.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:18.452Z,1516404738.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:18.798Z,1516404738.798 [NAL9602](INFO): NAL9602 initialized
2018-01-19T23:32:18.815Z,1516404738.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:18.848Z,1516404738.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:19.211Z,1516404739.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:19.240Z,1516404739.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:19.626Z,1516404739.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:19.657Z,1516404739.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:20.038Z,1516404740.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:20.056Z,1516404740.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:20.435Z,1516404740.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:20.452Z,1516404740.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:20.813Z,1516404740.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:20.855Z,1516404740.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:21.217Z,1516404741.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:21.251Z,1516404741.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:21.612Z,1516404741.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:21.647Z,1516404741.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:22.020Z,1516404742.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:22.053Z,1516404742.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:22.442Z,1516404742.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:22.456Z,1516404742.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:22.823Z,1516404742.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:22.866Z,1516404742.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:23.216Z,1516404743.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:23.247Z,1516404743.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:23.607Z,1516404743.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:23.650Z,1516404743.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:24.022Z,1516404744.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:24.059Z,1516404744.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:24.422Z,1516404744.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:24.447Z,1516404744.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:24.830Z,1516404744.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:24.858Z,1516404744.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:25.217Z,1516404745.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:25.231Z,1516404745.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:25.619Z,1516404745.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:25.633Z,1516404745.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:26.030Z,1516404746.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:26.064Z,1516404746.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:26.430Z,1516404746.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:26.464Z,1516404746.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:26.830Z,1516404746.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:26.870Z,1516404746.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:27.222Z,1516404747.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:27.244Z,1516404747.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:27.621Z,1516404747.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:27.635Z,1516404747.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:28.022Z,1516404748.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:28.036Z,1516404748.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:28.423Z,1516404748.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:28.437Z,1516404748.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:28.835Z,1516404748.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:28.868Z,1516404748.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:29.216Z,1516404749.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:29.230Z,1516404749.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:29.615Z,1516404749.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:29.632Z,1516404749.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:30.020Z,1516404750.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:30.039Z,1516404750.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:30.425Z,1516404750.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:30.439Z,1516404750.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:30.830Z,1516404750.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:30.844Z,1516404750.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:31.224Z,1516404751.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:31.243Z,1516404751.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:31.624Z,1516404751.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:31.637Z,1516404751.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:32.019Z,1516404752.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:32.039Z,1516404752.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:32.420Z,1516404752.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:32.434Z,1516404752.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:32.814Z,1516404752.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:32.840Z,1516404752.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:33.234Z,1516404753.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:33.249Z,1516404753.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:33.626Z,1516404753.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:33.640Z,1516404753.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:34.027Z,1516404754.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:34.062Z,1516404754.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:34.415Z,1516404754.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:34.435Z,1516404754.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:34.813Z,1516404754.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:34.827Z,1516404754.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:35.215Z,1516404755.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:35.234Z,1516404755.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:35.616Z,1516404755.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:35.631Z,1516404755.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:36.012Z,1516404756.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:36.039Z,1516404756.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:36.422Z,1516404756.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:36.442Z,1516404756.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:36.841Z,1516404756.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:36.858Z,1516404756.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:37.236Z,1516404757.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:37.250Z,1516404757.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:37.616Z,1516404757.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:37.647Z,1516404757.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:38.016Z,1516404758.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:38.046Z,1516404758.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:38.420Z,1516404758.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:38.447Z,1516404758.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:38.816Z,1516404758.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:38.847Z,1516404758.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:39.236Z,1516404759.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:39.250Z,1516404759.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:39.639Z,1516404759.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:39.653Z,1516404759.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:40.036Z,1516404760.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:40.054Z,1516404760.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:40.419Z,1516404760.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:40.447Z,1516404760.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:40.819Z,1516404760.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:40.848Z,1516404760.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:41.217Z,1516404761.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:41.250Z,1516404761.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:41.613Z,1516404761.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:41.627Z,1516404761.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:42.015Z,1516404762.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:42.051Z,1516404762.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:42.426Z,1516404762.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:42.458Z,1516404762.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:42.834Z,1516404762.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:42.863Z,1516404762.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:43.230Z,1516404763.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:43.253Z,1516404763.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:43.619Z,1516404763.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:43.633Z,1516404763.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:44.013Z,1516404764.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:44.027Z,1516404764.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:44.420Z,1516404764.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:44.434Z,1516404764.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:44.815Z,1516404764.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:44.829Z,1516404764.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:45.230Z,1516404765.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:45.260Z,1516404765.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:45.630Z,1516404765.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:45.644Z,1516404765.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:46.034Z,1516404766.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:46.067Z,1516404766.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:46.420Z,1516404766.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:46.435Z,1516404766.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:46.817Z,1516404766.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:46.840Z,1516404766.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:47.224Z,1516404767.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:47.238Z,1516404767.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:47.623Z,1516404767.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:47.643Z,1516404767.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:48.023Z,1516404768.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:48.037Z,1516404768.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:48.425Z,1516404768.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:48.446Z,1516404768.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:48.830Z,1516404768.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:48.844Z,1516404768.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:49.224Z,1516404769.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:49.243Z,1516404769.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:49.624Z,1516404769.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:49.637Z,1516404769.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:50.019Z,1516404770.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:50.033Z,1516404770.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:50.432Z,1516404770.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:50.446Z,1516404770.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:50.807Z,1516404770.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:50.839Z,1516404770.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:51.234Z,1516404771.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:51.248Z,1516404771.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:51.634Z,1516404771.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:51.648Z,1516404771.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:52.025Z,1516404772.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:52.047Z,1516404772.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:52.411Z,1516404772.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:52.443Z,1516404772.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:52.811Z,1516404772.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:52.843Z,1516404772.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:53.207Z,1516404773.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:53.246Z,1516404773.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:53.616Z,1516404773.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:53.641Z,1516404773.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:54.011Z,1516404774.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:54.042Z,1516404774.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:54.435Z,1516404774.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:54.449Z,1516404774.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:54.838Z,1516404774.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:54.859Z,1516404774.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:55.234Z,1516404775.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:55.248Z,1516404775.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:55.607Z,1516404775.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:55.650Z,1516404775.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:56.015Z,1516404776.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:56.046Z,1516404776.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:56.412Z,1516404776.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:56.438Z,1516404776.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:56.815Z,1516404776.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:56.853Z,1516404776.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:57.226Z,1516404777.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:57.256Z,1516404777.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:57.626Z,1516404777.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:57.663Z,1516404777.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:58.030Z,1516404778.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:58.058Z,1516404778.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:58.418Z,1516404778.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:58.432Z,1516404778.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:58.819Z,1516404778.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:58.855Z,1516404778.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:59.219Z,1516404779.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:59.233Z,1516404779.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:32:59.612Z,1516404779.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:32:59.630Z,1516404779.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:00.025Z,1516404780.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:00.039Z,1516404780.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:00.429Z,1516404780.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:00.450Z,1516404780.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:00.831Z,1516404780.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:00.845Z,1516404780.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:01.229Z,1516404781.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:01.250Z,1516404781.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:01.626Z,1516404781.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:01.640Z,1516404781.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:02.026Z,1516404782.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:02.040Z,1516404782.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:02.426Z,1516404782.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:02.441Z,1516404782.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:02.818Z,1516404782.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:02.833Z,1516404782.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:05.926Z,1516404785.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:05.941Z,1516404785.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:06.059Z,1516404786.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:06.103Z,1516404786.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:06.406Z,1516404786.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:06.435Z,1516404786.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:06.795Z,1516404786.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:06.834Z,1516404786.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:07.188Z,1516404787.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:07.202Z,1516404787.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:07.596Z,1516404787.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:07.626Z,1516404787.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:07.991Z,1516404787.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:08.005Z,1516404788.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:08.406Z,1516404788.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:08.429Z,1516404788.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:08.820Z,1516404788.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:08.839Z,1516404788.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:09.210Z,1516404789.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:09.234Z,1516404789.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:09.595Z,1516404789.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:09.631Z,1516404789.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:09.995Z,1516404789.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:10.015Z,1516404790.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:10.393Z,1516404790.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:10.407Z,1516404790.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:10.792Z,1516404790.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:10.811Z,1516404790.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:11.210Z,1516404791.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:11.240Z,1516404791.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:11.598Z,1516404791.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:11.612Z,1516404791.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:12.006Z,1516404792.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:12.020Z,1516404792.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:12.396Z,1516404792.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:12.415Z,1516404792.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:12.796Z,1516404792.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:12.810Z,1516404792.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:13.196Z,1516404793.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:13.211Z,1516404793.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:13.594Z,1516404793.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:13.608Z,1516404793.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:13.992Z,1516404793.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:14.006Z,1516404794.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:14.410Z,1516404794.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:14.424Z,1516404794.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:14.804Z,1516404794.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:14.823Z,1516404794.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:15.205Z,1516404795.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:15.219Z,1516404795.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:15.599Z,1516404795.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:15.619Z,1516404795.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:15.999Z,1516404795.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:16.019Z,1516404796.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:16.400Z,1516404796.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:16.414Z,1516404796.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:16.799Z,1516404796.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:16.819Z,1516404796.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:17.204Z,1516404797.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:17.223Z,1516404797.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:17.606Z,1516404797.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:17.619Z,1516404797.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:18.005Z,1516404798.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:18.023Z,1516404798.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:18.399Z,1516404798.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:18.419Z,1516404798.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:18.800Z,1516404798.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:18.813Z,1516404798.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:19.199Z,1516404799.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:19.219Z,1516404799.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:19.597Z,1516404799.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:19.611Z,1516404799.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:19.000Z,1516404800.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:20.013Z,1516404800.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:20.405Z,1516404800.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:20.423Z,1516404800.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:20.806Z,1516404800.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:20.820Z,1516404800.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:21.205Z,1516404801.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:21.219Z,1516404801.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:21.599Z,1516404801.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:21.619Z,1516404801.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:21.999Z,1516404801.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:22.019Z,1516404802.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:22.401Z,1516404802.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:22.414Z,1516404802.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:22.799Z,1516404802.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:22.819Z,1516404802.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:23.204Z,1516404803.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:23.219Z,1516404803.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:23.605Z,1516404803.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:23.619Z,1516404803.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:24.005Z,1516404804.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:24.019Z,1516404804.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:24.395Z,1516404804.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:24.409Z,1516404804.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:24.791Z,1516404804.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:24.810Z,1516404804.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:25.199Z,1516404805.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:25.219Z,1516404805.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:25.596Z,1516404805.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:25.610Z,1516404805.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:25.993Z,1516404805.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:26.019Z,1516404806.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:26.405Z,1516404806.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:26.419Z,1516404806.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:26.804Z,1516404806.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:26.823Z,1516404806.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:27.205Z,1516404807.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:27.219Z,1516404807.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:27.599Z,1516404807.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:27.619Z,1516404807.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:27.999Z,1516404807.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:28.014Z,1516404808.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:28.392Z,1516404808.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:28.410Z,1516404808.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:28.798Z,1516404808.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:28.812Z,1516404808.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:29.204Z,1516404809.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:29.223Z,1516404809.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:29.606Z,1516404809.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:29.620Z,1516404809.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:30.005Z,1516404810.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:30.019Z,1516404810.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:30.398Z,1516404810.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:30.412Z,1516404810.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:30.792Z,1516404810.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:30.810Z,1516404810.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:31.199Z,1516404811.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:31.219Z,1516404811.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:31.600Z,1516404811.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:31.614Z,1516404811.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:31.999Z,1516404811.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:32.013Z,1516404812.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:32.405Z,1516404812.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:32.419Z,1516404812.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:32.806Z,1516404812.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:32.820Z,1516404812.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:33.205Z,1516404813.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:33.219Z,1516404813.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:33.600Z,1516404813.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:33.619Z,1516404813.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:33.999Z,1516404813.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:34.013Z,1516404814.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:34.393Z,1516404814.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:34.414Z,1516404814.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:34.800Z,1516404814.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:34.814Z,1516404814.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:35.206Z,1516404815.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:35.220Z,1516404815.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:35.606Z,1516404815.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:35.620Z,1516404815.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:36.006Z,1516404816.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:36.020Z,1516404816.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:36.406Z,1516404816.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:36.445Z,1516404816.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:36.834Z,1516404816.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:36.848Z,1516404816.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:37.187Z,1516404817.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:37.227Z,1516404817.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:37.599Z,1516404817.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:37.619Z,1516404817.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:38.001Z,1516404818.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:38.035Z,1516404818.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:38.400Z,1516404818.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:38.432Z,1516404818.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:38.821Z,1516404818.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:38.843Z,1516404818.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:39.226Z,1516404819.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:39.244Z,1516404819.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:39.582Z,1516404819.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:39.615Z,1516404819.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:39.997Z,1516404819.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:40.020Z,1516404820.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:40.400Z,1516404820.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:40.454Z,1516404820.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:40.799Z,1516404820.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:40.845Z,1516404820.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:41.204Z,1516404821.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:41.246Z,1516404821.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:41.605Z,1516404821.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:41.663Z,1516404821.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:42.009Z,1516404822.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:42.056Z,1516404822.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:42.397Z,1516404822.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:42.416Z,1516404822.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:42.789Z,1516404822.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:42.828Z,1516404822.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:43.189Z,1516404823.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:43.244Z,1516404823.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:43.590Z,1516404823.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:43.632Z,1516404823.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:43.989Z,1516404823.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:44.020Z,1516404824.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:44.408Z,1516404824.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:44.435Z,1516404824.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:44.809Z,1516404824.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:44.838Z,1516404824.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:45.200Z,1516404825.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:45.268Z,1516404825.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:45.589Z,1516404825.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:45.619Z,1516404825.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:46.015Z,1516404826.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:46.077Z,1516404826.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:46.390Z,1516404826.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:46.443Z,1516404826.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:46.792Z,1516404826.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:46.806Z,1516404826.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:47.206Z,1516404827.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:47.229Z,1516404827.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:47.610Z,1516404827.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:47.634Z,1516404827.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:48.002Z,1516404828.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:48.032Z,1516404828.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:48.392Z,1516404828.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:48.406Z,1516404828.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:48.791Z,1516404828.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:48.805Z,1516404828.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:49.192Z,1516404829.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:49.206Z,1516404829.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:49.597Z,1516404829.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:49.611Z,1516404829.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:49.996Z,1516404829.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:50.010Z,1516404830.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:50.398Z,1516404830.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:50.412Z,1516404830.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:50.806Z,1516404830.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:50.820Z,1516404830.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:51.209Z,1516404831.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:51.223Z,1516404831.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:51.585Z,1516404831.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:51.605Z,1516404831.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:51.993Z,1516404831.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:52.011Z,1516404832.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:52.397Z,1516404832.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:52.410Z,1516404832.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:52.796Z,1516404832.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:52.811Z,1516404832.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:53.198Z,1516404833.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:53.212Z,1516404833.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:53.610Z,1516404833.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:53.623Z,1516404833.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:54.000Z,1516404834.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:54.019Z,1516404834.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:54.399Z,1516404834.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:54.413Z,1516404834.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:54.794Z,1516404834.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:54.818Z,1516404834.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:55.202Z,1516404835.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:55.216Z,1516404835.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:55.606Z,1516404835.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:55.620Z,1516404835.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:56.005Z,1516404836.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:56.019Z,1516404836.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:56.400Z,1516404836.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:56.414Z,1516404836.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:56.794Z,1516404836.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:56.809Z,1516404836.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:57.205Z,1516404837.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:57.219Z,1516404837.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:57.601Z,1516404837.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:57.615Z,1516404837.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:58.004Z,1516404838.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:58.023Z,1516404838.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:58.396Z,1516404838.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:58.425Z,1516404838.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:58.799Z,1516404838.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:58.819Z,1516404838.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:58.819Z,1516404838.819 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-01-19T23:33:58.819Z,1516404838.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:33:58.821Z,1516404838.821 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:58.821Z,1516404838.821 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-01-19T23:33:58.821Z,1516404838.821 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:33:58.823Z,1516404838.823 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:33:58.823Z,1516404838.823 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48
2018-01-19T23:33:58.823Z,1516404838.823 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:33:58.851Z,1516404838.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:33:58.851Z,1516404838.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:33:58.851Z,1516404838.851 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:33:59.202Z,1516404839.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:59.233Z,1516404839.233 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:33:59.233Z,1516404839.233 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-01-19T23:33:59.233Z,1516404839.233 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:33:59.234Z,1516404839.234 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-01-19T23:33:59.234Z,1516404839.234 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:33:59.234Z,1516404839.234 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48
2018-01-19T23:33:59.606Z,1516404839.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:33:59.625Z,1516404839.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:33:59.626Z,1516404839.626 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:33:59.626Z,1516404839.626 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:33:59.626Z,1516404839.626 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:33:59.627Z,1516404839.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:33:59.627Z,1516404839.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:33:59.627Z,1516404839.627 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:33:59.628Z,1516404839.628 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:33:59.628Z,1516404839.628 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:33:59.998Z,1516404839.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:00.019Z,1516404840.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:34:00.020Z,1516404840.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:00.388Z,1516404840.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:00.418Z,1516404840.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:34:00.419Z,1516404840.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:00.791Z,1516404840.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:00.818Z,1516404840.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:34:00.819Z,1516404840.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:01.198Z,1516404841.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:01.218Z,1516404841.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:34:01.219Z,1516404841.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:01.620Z,1516404841.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:01.634Z,1516404841.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:34:01.634Z,1516404841.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:02.011Z,1516404842.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:02.025Z,1516404842.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:34:02.026Z,1516404842.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:02.389Z,1516404842.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:02.403Z,1516404842.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:34:02.404Z,1516404842.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:02.795Z,1516404842.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:02.828Z,1516404842.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:34:02.829Z,1516404842.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:03.206Z,1516404843.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:03.228Z,1516404843.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:34:03.229Z,1516404843.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:06.330Z,1516404846.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:06.347Z,1516404846.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-01-19T23:34:06.347Z,1516404846.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:06.468Z,1516404846.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:06.498Z,1516404846.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-01-19T23:34:06.499Z,1516404846.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:06.828Z,1516404846.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:06.842Z,1516404846.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:34:06.843Z,1516404846.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:07.223Z,1516404847.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:07.242Z,1516404847.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:34:07.243Z,1516404847.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:07.622Z,1516404847.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:07.640Z,1516404847.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:34:07.641Z,1516404847.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:08.024Z,1516404848.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:08.038Z,1516404848.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:34:08.039Z,1516404848.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:08.429Z,1516404848.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:08.443Z,1516404848.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:34:08.444Z,1516404848.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:08.834Z,1516404848.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:08.848Z,1516404848.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:34:08.849Z,1516404848.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:09.233Z,1516404849.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:09.247Z,1516404849.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:34:09.248Z,1516404849.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:09.627Z,1516404849.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:09.647Z,1516404849.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:34:09.647Z,1516404849.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:10.027Z,1516404850.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:10.047Z,1516404850.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:34:10.047Z,1516404850.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:10.429Z,1516404850.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:10.443Z,1516404850.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:34:10.444Z,1516404850.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:10.814Z,1516404850.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:10.846Z,1516404850.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:34:10.847Z,1516404850.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:11.237Z,1516404851.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:11.258Z,1516404851.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:34:11.259Z,1516404851.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:11.637Z,1516404851.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:11.658Z,1516404851.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:34:11.659Z,1516404851.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:12.030Z,1516404852.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:12.044Z,1516404852.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:34:12.045Z,1516404852.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:12.420Z,1516404852.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:12.440Z,1516404852.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:34:12.442Z,1516404852.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:12.818Z,1516404852.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:12.848Z,1516404852.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:34:12.849Z,1516404852.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:13.230Z,1516404853.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:13.244Z,1516404853.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:34:13.245Z,1516404853.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:13.637Z,1516404853.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:13.658Z,1516404853.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:34:13.659Z,1516404853.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:14.038Z,1516404854.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:14.058Z,1516404854.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:34:14.059Z,1516404854.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:14.429Z,1516404854.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:14.443Z,1516404854.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:34:14.444Z,1516404854.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:14.812Z,1516404854.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:14.842Z,1516404854.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:34:14.843Z,1516404854.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:15.239Z,1516404855.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:15.258Z,1516404855.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:34:15.259Z,1516404855.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:15.643Z,1516404855.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:15.656Z,1516404855.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:34:15.658Z,1516404855.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:16.033Z,1516404856.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:16.052Z,1516404856.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:34:16.052Z,1516404856.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:16.432Z,1516404856.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:16.446Z,1516404856.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:34:16.447Z,1516404856.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:16.812Z,1516404856.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:16.850Z,1516404856.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:34:16.851Z,1516404856.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:17.240Z,1516404857.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:17.254Z,1516404857.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:34:17.255Z,1516404857.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:17.640Z,1516404857.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:17.658Z,1516404857.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T23:34:17.659Z,1516404857.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:18.034Z,1516404858.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:18.054Z,1516404858.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T23:34:18.055Z,1516404858.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:18.419Z,1516404858.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:18.447Z,1516404858.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:34:18.448Z,1516404858.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:18.819Z,1516404858.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:18.847Z,1516404858.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:19.222Z,1516404859.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:19.259Z,1516404859.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:19.639Z,1516404859.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:19.655Z,1516404859.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:20.026Z,1516404860.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:20.055Z,1516404860.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:20.416Z,1516404860.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:20.447Z,1516404860.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:20.819Z,1516404860.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:20.854Z,1516404860.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:21.230Z,1516404861.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:21.259Z,1516404861.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:21.630Z,1516404861.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:21.657Z,1516404861.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:22.026Z,1516404862.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:22.056Z,1516404862.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:22.425Z,1516404862.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:22.439Z,1516404862.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:22.824Z,1516404862.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:22.839Z,1516404862.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:23.238Z,1516404863.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:23.268Z,1516404863.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:23.635Z,1516404863.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:23.661Z,1516404863.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:24.039Z,1516404864.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:24.070Z,1516404864.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:24.426Z,1516404864.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:24.441Z,1516404864.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:24.824Z,1516404864.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:24.839Z,1516404864.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:25.230Z,1516404865.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:25.245Z,1516404865.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:25.628Z,1516404865.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:25.643Z,1516404865.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:26.029Z,1516404866.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:26.052Z,1516404866.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:26.427Z,1516404866.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:26.447Z,1516404866.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:26.826Z,1516404866.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:26.840Z,1516404866.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:27.229Z,1516404867.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:27.243Z,1516404867.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:27.634Z,1516404867.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:27.648Z,1516404867.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:28.030Z,1516404868.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:28.051Z,1516404868.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:28.428Z,1516404868.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:28.442Z,1516404868.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:28.827Z,1516404868.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:28.841Z,1516404868.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:29.228Z,1516404869.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:29.243Z,1516404869.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:29.630Z,1516404869.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:29.644Z,1516404869.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:30.029Z,1516404870.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:30.043Z,1516404870.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:30.420Z,1516404870.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:30.434Z,1516404870.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:30.824Z,1516404870.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:30.838Z,1516404870.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:31.229Z,1516404871.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:31.243Z,1516404871.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:31.628Z,1516404871.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:31.642Z,1516404871.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:32.029Z,1516404872.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:32.043Z,1516404872.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:32.427Z,1516404872.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:32.447Z,1516404872.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:32.825Z,1516404872.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:32.839Z,1516404872.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:33.229Z,1516404873.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:33.243Z,1516404873.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:33.634Z,1516404873.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:33.648Z,1516404873.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:34.030Z,1516404874.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:34.051Z,1516404874.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:34.428Z,1516404874.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:34.442Z,1516404874.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:34.827Z,1516404874.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:34.841Z,1516404874.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:35.228Z,1516404875.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:35.243Z,1516404875.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:35.634Z,1516404875.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:35.648Z,1516404875.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:36.030Z,1516404876.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:36.044Z,1516404876.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:36.424Z,1516404876.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:36.438Z,1516404876.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:36.824Z,1516404876.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:36.839Z,1516404876.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:37.230Z,1516404877.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:37.245Z,1516404877.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:37.628Z,1516404877.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:37.642Z,1516404877.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:38.030Z,1516404878.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:38.044Z,1516404878.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:38.427Z,1516404878.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:38.441Z,1516404878.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:38.819Z,1516404878.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:38.833Z,1516404878.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:39.230Z,1516404879.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:39.244Z,1516404879.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:39.628Z,1516404879.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:39.647Z,1516404879.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:40.030Z,1516404880.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:40.044Z,1516404880.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:40.424Z,1516404880.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:40.438Z,1516404880.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:40.816Z,1516404880.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:40.838Z,1516404880.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:41.225Z,1516404881.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:41.239Z,1516404881.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:41.629Z,1516404881.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:41.643Z,1516404881.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:42.030Z,1516404882.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:42.044Z,1516404882.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:42.430Z,1516404882.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:42.444Z,1516404882.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:42.824Z,1516404882.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:42.838Z,1516404882.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:43.219Z,1516404883.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:43.233Z,1516404883.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:43.619Z,1516404883.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:43.634Z,1516404883.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:44.024Z,1516404884.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:44.038Z,1516404884.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:44.430Z,1516404884.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:44.445Z,1516404884.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:44.828Z,1516404884.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:44.842Z,1516404884.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:45.230Z,1516404885.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:45.244Z,1516404885.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:45.627Z,1516404885.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:45.641Z,1516404885.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:46.026Z,1516404886.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:46.040Z,1516404886.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:46.424Z,1516404886.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:46.438Z,1516404886.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:46.827Z,1516404886.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:46.847Z,1516404886.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:47.226Z,1516404887.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:47.240Z,1516404887.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:47.629Z,1516404887.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:47.643Z,1516404887.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:48.030Z,1516404888.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:48.044Z,1516404888.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:48.430Z,1516404888.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:48.451Z,1516404888.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:48.828Z,1516404888.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:48.842Z,1516404888.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:49.219Z,1516404889.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:49.233Z,1516404889.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:49.620Z,1516404889.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:49.634Z,1516404889.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:50.024Z,1516404890.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:50.043Z,1516404890.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:50.430Z,1516404890.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:50.445Z,1516404890.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:50.830Z,1516404890.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:50.844Z,1516404890.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:51.230Z,1516404891.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:51.244Z,1516404891.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:51.628Z,1516404891.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:51.642Z,1516404891.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:52.026Z,1516404892.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:52.041Z,1516404892.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:52.424Z,1516404892.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:52.443Z,1516404892.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:52.828Z,1516404892.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:52.847Z,1516404892.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:53.227Z,1516404893.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:53.241Z,1516404893.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:53.630Z,1516404893.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:53.644Z,1516404893.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:54.030Z,1516404894.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:54.044Z,1516404894.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:54.434Z,1516404894.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:54.455Z,1516404894.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:54.830Z,1516404894.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:54.844Z,1516404894.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:55.225Z,1516404895.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:55.247Z,1516404895.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:55.630Z,1516404895.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:55.644Z,1516404895.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:56.026Z,1516404896.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:56.040Z,1516404896.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:56.434Z,1516404896.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:56.455Z,1516404896.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:56.834Z,1516404896.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:56.848Z,1516404896.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:57.234Z,1516404897.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:57.251Z,1516404897.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:57.628Z,1516404897.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:57.647Z,1516404897.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:58.027Z,1516404898.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:58.042Z,1516404898.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:58.428Z,1516404898.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:58.447Z,1516404898.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:58.829Z,1516404898.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:58.843Z,1516404898.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:59.219Z,1516404899.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:59.234Z,1516404899.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:34:59.634Z,1516404899.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:34:59.651Z,1516404899.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:00.034Z,1516404900.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:00.056Z,1516404900.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:00.438Z,1516404900.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:00.452Z,1516404900.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:00.816Z,1516404900.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:00.847Z,1516404900.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:01.212Z,1516404901.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:01.238Z,1516404901.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:01.613Z,1516404901.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:01.643Z,1516404901.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:02.019Z,1516404902.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:02.045Z,1516404902.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:02.439Z,1516404902.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:02.455Z,1516404902.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:02.842Z,1516404902.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:02.856Z,1516404902.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:03.237Z,1516404903.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:03.263Z,1516404903.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:06.321Z,1516404906.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:06.344Z,1516404906.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:06.450Z,1516404906.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:06.494Z,1516404906.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:06.814Z,1516404906.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:06.844Z,1516404906.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:07.214Z,1516404907.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:07.227Z,1516404907.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:07.602Z,1516404907.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:07.616Z,1516404907.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:07.997Z,1516404907.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:08.014Z,1516404908.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:08.403Z,1516404908.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:08.417Z,1516404908.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:08.801Z,1516404908.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:08.815Z,1516404908.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:09.200Z,1516404909.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:09.219Z,1516404909.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:09.614Z,1516404909.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:09.645Z,1516404909.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:10.002Z,1516404910.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:10.016Z,1516404910.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:10.414Z,1516404910.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:10.444Z,1516404910.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:10.799Z,1516404910.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:10.812Z,1516404910.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:11.193Z,1516404911.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:11.216Z,1516404911.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:11.601Z,1516404911.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:11.615Z,1516404911.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:11.996Z,1516404911.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:12.020Z,1516404912.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:12.400Z,1516404912.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:12.419Z,1516404912.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:12.814Z,1516404912.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:12.828Z,1516404912.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:13.206Z,1516404913.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:13.226Z,1516404913.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:13.593Z,1516404913.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:13.607Z,1516404913.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:13.995Z,1516404913.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:14.014Z,1516404914.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:14.404Z,1516404914.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:14.418Z,1516404914.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:14.793Z,1516404914.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:14.814Z,1516404914.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:15.194Z,1516404915.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:15.215Z,1516404915.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:15.610Z,1516404915.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:15.624Z,1516404915.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:16.010Z,1516404916.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:16.025Z,1516404916.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:16.408Z,1516404916.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:16.427Z,1516404916.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:16.804Z,1516404916.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:16.823Z,1516404916.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:17.185Z,1516404917.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:17.218Z,1516404917.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:17.604Z,1516404917.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:17.618Z,1516404917.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:18.004Z,1516404918.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:18.023Z,1516404918.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:18.405Z,1516404918.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:18.419Z,1516404918.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:18.807Z,1516404918.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:18.827Z,1516404918.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:19.210Z,1516404919.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:19.224Z,1516404919.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:19.597Z,1516404919.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:19.611Z,1516404919.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:19.999Z,1516404919.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:20.013Z,1516404920.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:20.400Z,1516404920.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:20.414Z,1516404920.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:20.798Z,1516404920.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:20.817Z,1516404920.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:21.199Z,1516404921.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:21.213Z,1516404921.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:21.610Z,1516404921.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:21.624Z,1516404921.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:22.010Z,1516404922.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:22.024Z,1516404922.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:22.409Z,1516404922.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:22.430Z,1516404922.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:22.804Z,1516404922.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:22.823Z,1516404922.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:23.203Z,1516404923.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:23.223Z,1516404923.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:23.604Z,1516404923.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:23.618Z,1516404923.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:24.000Z,1516404924.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:24.014Z,1516404924.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:24.405Z,1516404924.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:24.419Z,1516404924.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:24.810Z,1516404924.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:24.824Z,1516404924.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:25.214Z,1516404925.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:25.235Z,1516404925.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:25.603Z,1516404925.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:25.623Z,1516404925.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:25.998Z,1516404925.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:26.018Z,1516404926.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:26.396Z,1516404926.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:26.419Z,1516404926.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:26.796Z,1516404926.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:26.817Z,1516404926.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:27.194Z,1516404927.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:27.219Z,1516404927.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:27.610Z,1516404927.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:27.632Z,1516404927.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:28.017Z,1516404928.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:28.039Z,1516404928.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:28.414Z,1516404928.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:28.428Z,1516404928.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:28.792Z,1516404928.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:28.823Z,1516404928.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:29.196Z,1516404929.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:29.222Z,1516404929.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:29.593Z,1516404929.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:29.623Z,1516404929.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:29.990Z,1516404929.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:30.004Z,1516404930.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:30.407Z,1516404930.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:30.432Z,1516404930.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:30.807Z,1516404930.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:30.842Z,1516404930.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:31.202Z,1516404931.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:31.232Z,1516404931.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:31.595Z,1516404931.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:31.631Z,1516404931.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:31.999Z,1516404931.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:32.035Z,1516404932.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:32.399Z,1516404932.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:32.414Z,1516404932.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:32.802Z,1516404932.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:32.816Z,1516404932.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:33.197Z,1516404933.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:33.211Z,1516404933.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:33.614Z,1516404933.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:33.645Z,1516404933.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:34.010Z,1516404934.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:34.024Z,1516404934.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:34.414Z,1516404934.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:34.428Z,1516404934.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:34.804Z,1516404934.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:34.818Z,1516404934.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:35.204Z,1516404935.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:35.218Z,1516404935.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:35.603Z,1516404935.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:35.623Z,1516404935.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:36.000Z,1516404936.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:36.015Z,1516404936.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:36.406Z,1516404936.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:36.421Z,1516404936.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:36.810Z,1516404936.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:36.824Z,1516404936.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:37.206Z,1516404937.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:37.220Z,1516404937.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:37.603Z,1516404937.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:37.623Z,1516404937.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:38.003Z,1516404938.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:38.017Z,1516404938.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:38.401Z,1516404938.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:38.415Z,1516404938.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:38.799Z,1516404938.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:38.818Z,1516404938.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:39.199Z,1516404939.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:39.219Z,1516404939.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:39.606Z,1516404939.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:39.626Z,1516404939.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:40.006Z,1516404940.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:40.027Z,1516404940.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:40.406Z,1516404940.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:40.421Z,1516404940.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:40.800Z,1516404940.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:40.814Z,1516404940.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:41.203Z,1516404941.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:41.217Z,1516404941.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:41.599Z,1516404941.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:41.614Z,1516404941.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:42.003Z,1516404942.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:42.017Z,1516404942.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:42.404Z,1516404942.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:42.431Z,1516404942.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:42.810Z,1516404942.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:42.824Z,1516404942.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:43.209Z,1516404943.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:43.223Z,1516404943.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:43.595Z,1516404943.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:43.620Z,1516404943.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:43.991Z,1516404943.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:44.016Z,1516404944.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:44.390Z,1516404944.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:44.422Z,1516404944.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:44.806Z,1516404944.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:44.820Z,1516404944.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:45.207Z,1516404945.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:45.227Z,1516404945.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:45.614Z,1516404945.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:45.628Z,1516404945.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:46.018Z,1516404946.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:46.032Z,1516404946.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:46.417Z,1516404946.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:46.431Z,1516404946.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:46.791Z,1516404946.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:46.818Z,1516404946.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:47.195Z,1516404947.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:47.220Z,1516404947.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:47.592Z,1516404947.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:47.617Z,1516404947.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:47.990Z,1516404947.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:48.023Z,1516404948.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:48.414Z,1516404948.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:48.428Z,1516404948.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:48.818Z,1516404948.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:48.832Z,1516404948.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:49.214Z,1516404949.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:49.228Z,1516404949.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:49.607Z,1516404949.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:49.627Z,1516404949.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:49.995Z,1516404949.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:50.020Z,1516404950.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:50.391Z,1516404950.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:50.419Z,1516404950.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:50.796Z,1516404950.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:50.821Z,1516404950.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:51.193Z,1516404951.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:51.218Z,1516404951.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:51.609Z,1516404951.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:51.623Z,1516404951.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:52.018Z,1516404952.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:52.032Z,1516404952.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:52.414Z,1516404952.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:52.428Z,1516404952.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:52.807Z,1516404952.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:52.821Z,1516404952.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:53.206Z,1516404953.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:53.221Z,1516404953.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:53.608Z,1516404953.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:53.622Z,1516404953.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:53.991Z,1516404953.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:54.017Z,1516404954.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:54.415Z,1516404954.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:54.435Z,1516404954.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:54.818Z,1516404954.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:54.832Z,1516404954.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:55.214Z,1516404955.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:55.228Z,1516404955.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:55.595Z,1516404955.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:55.620Z,1516404955.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:55.993Z,1516404955.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:56.031Z,1516404956.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:56.398Z,1516404956.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:56.424Z,1516404956.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:56.797Z,1516404956.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:56.822Z,1516404956.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:57.198Z,1516404957.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:57.223Z,1516404957.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:57.600Z,1516404957.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:57.632Z,1516404957.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:58.018Z,1516404958.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:58.039Z,1516404958.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:58.414Z,1516404958.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:58.428Z,1516404958.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:58.791Z,1516404958.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:58.824Z,1516404958.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:59.197Z,1516404959.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:59.223Z,1516404959.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:59.592Z,1516404959.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:35:59.622Z,1516404959.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:35:59.990Z,1516404959.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:00.023Z,1516404960.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:00.414Z,1516404960.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:00.428Z,1516404960.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:00.816Z,1516404960.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:00.830Z,1516404960.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:01.216Z,1516404961.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:01.230Z,1516404961.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:01.598Z,1516404961.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:01.623Z,1516404961.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:01.992Z,1516404961.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:02.022Z,1516404962.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:02.399Z,1516404962.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:02.444Z,1516404962.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:02.819Z,1516404962.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:02.839Z,1516404962.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:03.214Z,1516404963.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:03.228Z,1516404963.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:03.591Z,1516404963.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:03.623Z,1516404963.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:06.700Z,1516404966.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:06.723Z,1516404966.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:06.834Z,1516404966.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:06.849Z,1516404966.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:07.194Z,1516404967.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:07.227Z,1516404967.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:07.594Z,1516404967.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:07.625Z,1516404967.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:07.982Z,1516404967.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:07.000Z,1516404968.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:08.382Z,1516404968.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:08.398Z,1516404968.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:08.782Z,1516404968.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:08.830Z,1516404968.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:09.176Z,1516404969.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:09.191Z,1516404969.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:09.597Z,1516404969.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:09.621Z,1516404969.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:09.997Z,1516404969.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:10.024Z,1516404970.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:10.381Z,1516404970.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:10.424Z,1516404970.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:10.778Z,1516404970.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:10.796Z,1516404970.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:11.185Z,1516404971.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:11.204Z,1516404971.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:11.587Z,1516404971.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:11.603Z,1516404971.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:11.984Z,1516404971.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:12.030Z,1516404972.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:12.390Z,1516404972.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:12.406Z,1516404972.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:12.789Z,1516404972.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:12.807Z,1516404972.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:13.196Z,1516404973.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:13.215Z,1516404973.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:13.579Z,1516404973.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:13.603Z,1516404973.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:13.985Z,1516404973.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:13.999Z,1516404973.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:14.391Z,1516404974.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:14.409Z,1516404974.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:14.793Z,1516404974.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:14.808Z,1516404974.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:15.193Z,1516404975.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:15.236Z,1516404975.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:15.585Z,1516404975.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:15.599Z,1516404975.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:15.983Z,1516404975.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:15.999Z,1516404975.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:16.395Z,1516404976.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:16.411Z,1516404976.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:16.792Z,1516404976.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:16.836Z,1516404976.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:17.186Z,1516404977.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:17.200Z,1516404977.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:17.578Z,1516404977.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:17.597Z,1516404977.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:17.983Z,1516404977.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:18.002Z,1516404978.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:18.387Z,1516404978.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:18.401Z,1516404978.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:18.792Z,1516404978.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:18.811Z,1516404978.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:19.190Z,1516404979.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:19.205Z,1516404979.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:19.572Z,1516404979.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:19.602Z,1516404979.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:19.984Z,1516404979.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:20.003Z,1516404980.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:20.390Z,1516404980.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:20.404Z,1516404980.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:20.790Z,1516404980.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:20.804Z,1516404980.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:21.193Z,1516404981.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:21.211Z,1516404981.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:21.572Z,1516404981.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:21.597Z,1516404981.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:21.971Z,1516404981.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:22.005Z,1516404982.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:22.393Z,1516404982.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:22.408Z,1516404982.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:22.796Z,1516404982.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:22.814Z,1516404982.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:23.194Z,1516404983.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:23.208Z,1516404983.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:23.584Z,1516404983.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:23.599Z,1516404983.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:23.992Z,1516404983.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:24.011Z,1516404984.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:24.394Z,1516404984.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:24.413Z,1516404984.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:24.796Z,1516404984.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:24.815Z,1516404984.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:25.190Z,1516404985.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:25.204Z,1516404985.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:25.567Z,1516404985.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:25.602Z,1516404985.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:25.984Z,1516404985.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:25.998Z,1516404985.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:26.371Z,1516404986.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:26.402Z,1516404986.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:26.785Z,1516404986.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:26.811Z,1516404986.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:27.196Z,1516404987.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:27.215Z,1516404987.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:27.594Z,1516404987.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:27.610Z,1516404987.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:27.975Z,1516404987.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:28.001Z,1516404988.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:28.372Z,1516404988.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:28.396Z,1516404988.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:28.772Z,1516404988.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:28.797Z,1516404988.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:29.167Z,1516404989.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:29.203Z,1516404989.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:29.594Z,1516404989.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:29.608Z,1516404989.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:30.000Z,1516404990.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:30.015Z,1516404990.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:30.394Z,1516404990.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:30.408Z,1516404990.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:30.771Z,1516404990.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:30.796Z,1516404990.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:31.171Z,1516404991.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:31.196Z,1516404991.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:31.567Z,1516404991.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:31.603Z,1516404991.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:31.976Z,1516404991.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:32.001Z,1516404992.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:32.371Z,1516404992.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:32.396Z,1516404992.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:32.787Z,1516404992.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:32.801Z,1516404992.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:33.197Z,1516404993.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:33.211Z,1516404993.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:33.590Z,1516404993.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:33.604Z,1516404993.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:33.971Z,1516404993.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:33.999Z,1516404993.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:34.371Z,1516404994.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:34.396Z,1516404994.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:34.772Z,1516404994.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:34.797Z,1516404994.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:35.167Z,1516404995.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:35.203Z,1516404995.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:35.594Z,1516404995.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:35.608Z,1516404995.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:35.998Z,1516404995.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:36.012Z,1516404996.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:36.394Z,1516404996.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:36.408Z,1516404996.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:36.772Z,1516404996.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:36.796Z,1516404996.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:37.171Z,1516404997.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:37.196Z,1516404997.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:37.567Z,1516404997.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:37.599Z,1516404997.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:37.976Z,1516404997.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:38.001Z,1516404998.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:38.371Z,1516404998.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:38.396Z,1516404998.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:38.788Z,1516404998.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:38.802Z,1516404998.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:39.194Z,1516404999.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:39.208Z,1516404999.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:39.590Z,1516404999.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:39.604Z,1516404999.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:39.971Z,1516404999.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:40.002Z,1516405000.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:40.375Z,1516405000.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:40.400Z,1516405000.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:40.772Z,1516405000.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:40.797Z,1516405000.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:41.167Z,1516405001.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:41.203Z,1516405001.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:41.590Z,1516405001.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:41.604Z,1516405001.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:42.000Z,1516405002.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:42.019Z,1516405002.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:42.387Z,1516405002.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:42.401Z,1516405002.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:42.775Z,1516405002.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:42.800Z,1516405002.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:43.171Z,1516405003.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:43.196Z,1516405003.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:43.571Z,1516405003.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:43.606Z,1516405003.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:43.974Z,1516405003.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:43.999Z,1516405003.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:44.387Z,1516405004.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:44.402Z,1516405004.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:44.788Z,1516405004.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:44.802Z,1516405004.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:45.186Z,1516405005.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:45.208Z,1516405005.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:45.586Z,1516405005.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:45.607Z,1516405005.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:45.972Z,1516405005.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:46.004Z,1516405006.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:46.365Z,1516405006.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:46.392Z,1516405006.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:46.777Z,1516405006.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:46.803Z,1516405006.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:47.167Z,1516405007.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:47.203Z,1516405007.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:47.578Z,1516405007.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:47.616Z,1516405007.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:47.000Z,1516405008.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:48.014Z,1516405008.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:48.378Z,1516405008.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:48.406Z,1516405008.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:48.776Z,1516405008.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:48.803Z,1516405008.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:49.172Z,1516405009.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:49.207Z,1516405009.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:49.571Z,1516405009.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:49.602Z,1516405009.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:49.973Z,1516405009.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:49.995Z,1516405009.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:50.379Z,1516405010.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:50.414Z,1516405010.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:50.791Z,1516405010.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:50.817Z,1516405010.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:51.178Z,1516405011.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:51.210Z,1516405011.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:51.591Z,1516405011.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:51.619Z,1516405011.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:51.977Z,1516405011.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:51.992Z,1516405011.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:52.367Z,1516405012.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:52.395Z,1516405012.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:52.780Z,1516405012.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:52.794Z,1516405012.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:53.179Z,1516405013.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:53.194Z,1516405013.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:53.582Z,1516405013.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:53.599Z,1516405013.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:53.995Z,1516405013.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:54.025Z,1516405014.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:54.386Z,1516405014.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:54.401Z,1516405014.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:54.783Z,1516405014.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:54.803Z,1516405014.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:55.179Z,1516405015.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:55.199Z,1516405015.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:55.584Z,1516405015.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:55.598Z,1516405015.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:55.983Z,1516405015.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:56.003Z,1516405016.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:56.378Z,1516405016.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:56.392Z,1516405016.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:56.785Z,1516405016.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:56.799Z,1516405016.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:57.184Z,1516405017.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:57.203Z,1516405017.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:57.586Z,1516405017.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:57.600Z,1516405017.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:57.984Z,1516405017.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:57.998Z,1516405017.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:58.376Z,1516405018.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:58.394Z,1516405018.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:58.774Z,1516405018.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:58.807Z,1516405018.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:59.184Z,1516405019.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:59.197Z,1516405019.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:59.588Z,1516405019.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:36:59.603Z,1516405019.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:36:59.990Z,1516405019.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:00.004Z,1516405020.004 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:00.004Z,1516405020.004 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-01-19T23:37:00.004Z,1516405020.004 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:37:00.006Z,1516405020.006 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:00.006Z,1516405020.006 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-01-19T23:37:00.006Z,1516405020.006 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:37:00.008Z,1516405020.008 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:00.008Z,1516405020.008 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49
2018-01-19T23:37:00.008Z,1516405020.008 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:37:00.036Z,1516405020.036 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:37:00.036Z,1516405020.036 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:37:00.041Z,1516405020.041 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:37:00.389Z,1516405020.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:00.438Z,1516405020.438 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:37:00.438Z,1516405020.438 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-01-19T23:37:00.438Z,1516405020.438 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:37:00.438Z,1516405020.438 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-01-19T23:37:00.439Z,1516405020.439 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:37:00.439Z,1516405020.439 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49
2018-01-19T23:37:00.767Z,1516405020.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:00.797Z,1516405020.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:37:00.798Z,1516405020.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:37:00.798Z,1516405020.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:37:00.798Z,1516405020.798 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:37:00.799Z,1516405020.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:37:00.799Z,1516405020.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:37:00.799Z,1516405020.799 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:37:00.800Z,1516405020.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:37:00.800Z,1516405020.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:37:01.191Z,1516405021.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:01.205Z,1516405021.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:37:01.206Z,1516405021.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:01.567Z,1516405021.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:01.599Z,1516405021.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:37:01.600Z,1516405021.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:01.976Z,1516405021.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:02.001Z,1516405022.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:37:02.002Z,1516405022.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:02.371Z,1516405022.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:02.396Z,1516405022.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:37:02.397Z,1516405022.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:02.782Z,1516405022.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:02.806Z,1516405022.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:37:02.807Z,1516405022.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:02.810Z,1516405022.810 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T23:37:02.810Z,1516405022.810 [Default:CheckIn:C.Wait] Stopped
2018-01-19T23:37:02.810Z,1516405022.810 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T23:37:02.811Z,1516405022.811 [Default:CheckIn:D] Running Loop=1
2018-01-19T23:37:03.189Z,1516405023.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:03.203Z,1516405023.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:37:03.204Z,1516405023.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:03.207Z,1516405023.207 [Default:CheckIn:D] Stopped
2018-01-19T23:37:03.207Z,1516405023.207 [Default:CheckIn:E] Running Loop=1
2018-01-19T23:37:03.589Z,1516405023.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:03.607Z,1516405023.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:37:03.608Z,1516405023.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:03.611Z,1516405023.611 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 144.253011 min 
2018-01-19T23:37:03.611Z,1516405023.611 [Default:CheckIn:E] Stopped
2018-01-19T23:37:03.611Z,1516405023.611 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T23:37:03.611Z,1516405023.611 [Default:CheckIn] Stopped
2018-01-19T23:37:03.612Z,1516405023.612 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T23:37:03.612Z,1516405023.612 [Default:CheckIn](INFO): Running loop #15
2018-01-19T23:37:03.612Z,1516405023.612 [Default:CheckIn] Running Loop=15
2018-01-19T23:37:03.612Z,1516405023.612 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T23:37:03.612Z,1516405023.612 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T23:37:03.972Z,1516405023.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:04.007Z,1516405024.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:37:04.008Z,1516405024.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:07.069Z,1516405027.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:07.083Z,1516405027.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-01-19T23:37:07.084Z,1516405027.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:07.179Z,1516405027.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:07.215Z,1516405027.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:37:07.216Z,1516405027.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:07.571Z,1516405027.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:07.603Z,1516405027.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:37:07.604Z,1516405027.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:07.978Z,1516405027.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:08.002Z,1516405028.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:37:08.003Z,1516405028.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:08.374Z,1516405028.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:08.404Z,1516405028.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:37:08.409Z,1516405028.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:08.760Z,1516405028.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:08.773Z,1516405028.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:37:08.774Z,1516405028.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:09.161Z,1516405029.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:09.174Z,1516405029.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:37:09.175Z,1516405029.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:09.560Z,1516405029.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:09.578Z,1516405029.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:37:09.579Z,1516405029.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:09.961Z,1516405029.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:09.974Z,1516405029.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:37:09.975Z,1516405029.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:10.355Z,1516405030.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:10.373Z,1516405030.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:37:10.374Z,1516405030.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:10.778Z,1516405030.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:10.807Z,1516405030.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:37:10.808Z,1516405030.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:11.166Z,1516405031.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:11.179Z,1516405031.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:37:11.180Z,1516405031.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:11.566Z,1516405031.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:11.586Z,1516405031.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:37:11.587Z,1516405031.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:11.965Z,1516405031.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:11.979Z,1516405031.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:37:11.980Z,1516405031.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:12.357Z,1516405032.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:12.382Z,1516405032.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:37:12.383Z,1516405032.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:12.765Z,1516405032.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:12.779Z,1516405032.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:37:12.779Z,1516405032.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:13.164Z,1516405033.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:13.182Z,1516405033.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:37:13.183Z,1516405033.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:13.578Z,1516405033.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:13.592Z,1516405033.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:37:13.615Z,1516405033.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:13.978Z,1516405033.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:13.992Z,1516405033.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:37:14.009Z,1516405034.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:14.370Z,1516405034.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:14.384Z,1516405034.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:37:14.385Z,1516405034.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:14.759Z,1516405034.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:14.772Z,1516405034.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:37:14.773Z,1516405034.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:15.157Z,1516405035.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:15.183Z,1516405035.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:37:15.184Z,1516405035.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:15.567Z,1516405035.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:15.587Z,1516405035.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:37:15.587Z,1516405035.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:15.952Z,1516405035.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:15.977Z,1516405035.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:37:15.978Z,1516405035.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:16.368Z,1516405036.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:16.382Z,1516405036.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:37:16.382Z,1516405036.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:16.773Z,1516405036.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:16.787Z,1516405036.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:37:16.788Z,1516405036.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:17.173Z,1516405037.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:17.187Z,1516405037.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:37:17.188Z,1516405037.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:17.570Z,1516405037.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:17.584Z,1516405037.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:37:17.585Z,1516405037.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:17.959Z,1516405037.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:17.980Z,1516405037.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:37:17.981Z,1516405037.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:18.351Z,1516405038.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:18.384Z,1516405038.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:37:18.385Z,1516405038.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:18.769Z,1516405038.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:18.782Z,1516405038.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T23:37:18.783Z,1516405038.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:19.171Z,1516405039.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:19.191Z,1516405039.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T23:37:19.191Z,1516405039.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:19.573Z,1516405039.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:19.587Z,1516405039.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:37:19.588Z,1516405039.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:19.977Z,1516405039.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:19.991Z,1516405039.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-19T23:37:19.992Z,1516405039.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:20.374Z,1516405040.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:20.388Z,1516405040.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:20.751Z,1516405040.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:20.777Z,1516405040.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:21.149Z,1516405041.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:21.188Z,1516405041.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:21.567Z,1516405041.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:21.581Z,1516405041.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:21.964Z,1516405041.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:21.978Z,1516405041.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:22.357Z,1516405042.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:22.388Z,1516405042.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:22.777Z,1516405042.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:22.791Z,1516405042.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:23.177Z,1516405043.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:23.191Z,1516405043.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:23.576Z,1516405043.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:23.590Z,1516405043.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:23.965Z,1516405043.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:23.979Z,1516405043.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:24.359Z,1516405044.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:24.390Z,1516405044.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:24.770Z,1516405044.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:24.784Z,1516405044.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:25.168Z,1516405045.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:25.187Z,1516405045.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:25.575Z,1516405045.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:25.591Z,1516405045.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:25.976Z,1516405045.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:25.990Z,1516405045.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:26.374Z,1516405046.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:26.391Z,1516405046.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:26.768Z,1516405046.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:26.782Z,1516405046.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:27.162Z,1516405047.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:27.183Z,1516405047.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:27.560Z,1516405047.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:27.582Z,1516405047.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:27.965Z,1516405047.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:27.987Z,1516405047.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:28.362Z,1516405048.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:28.389Z,1516405048.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:28.778Z,1516405048.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:28.792Z,1516405048.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:29.178Z,1516405049.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:29.192Z,1516405049.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:29.571Z,1516405049.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:29.586Z,1516405049.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:29.955Z,1516405049.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:29.987Z,1516405049.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:30.351Z,1516405050.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:30.383Z,1516405050.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:30.768Z,1516405050.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:30.784Z,1516405050.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:31.155Z,1516405051.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:31.191Z,1516405051.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:31.579Z,1516405051.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:31.593Z,1516405051.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:31.982Z,1516405051.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:31.996Z,1516405051.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:32.374Z,1516405052.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:32.389Z,1516405052.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:32.767Z,1516405052.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:32.780Z,1516405052.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:33.153Z,1516405053.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:33.187Z,1516405053.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:33.551Z,1516405053.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:33.576Z,1516405053.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:33.952Z,1516405053.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:33.985Z,1516405053.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:34.353Z,1516405054.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:34.387Z,1516405054.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:34.770Z,1516405054.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:34.784Z,1516405054.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:35.173Z,1516405055.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:35.191Z,1516405055.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:35.574Z,1516405055.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:35.589Z,1516405055.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:35.955Z,1516405055.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:35.986Z,1516405055.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:36.351Z,1516405056.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:36.376Z,1516405056.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:36.752Z,1516405056.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:36.778Z,1516405056.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:37.151Z,1516405057.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:37.182Z,1516405057.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:37.574Z,1516405057.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:37.588Z,1516405057.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:38.010Z,1516405058.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:38.024Z,1516405058.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:38.374Z,1516405058.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:38.388Z,1516405058.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:38.755Z,1516405058.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:38.787Z,1516405058.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:39.149Z,1516405059.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:39.175Z,1516405059.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:39.559Z,1516405059.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:39.584Z,1516405059.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:39.952Z,1516405059.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:39.982Z,1516405059.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:40.353Z,1516405060.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:40.387Z,1516405060.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:40.774Z,1516405060.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:40.788Z,1516405060.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:41.173Z,1516405061.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:41.187Z,1516405061.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:41.574Z,1516405061.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:41.588Z,1516405061.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:41.955Z,1516405061.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:41.980Z,1516405061.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:42.351Z,1516405062.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:42.386Z,1516405062.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:42.760Z,1516405062.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:42.786Z,1516405062.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:43.155Z,1516405063.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:43.180Z,1516405063.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:43.570Z,1516405063.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:43.584Z,1516405063.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:43.985Z,1516405063.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:43.999Z,1516405063.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:44.374Z,1516405064.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:44.388Z,1516405064.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:44.754Z,1516405064.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:44.787Z,1516405064.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:45.149Z,1516405065.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:45.171Z,1516405065.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:45.551Z,1516405065.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:45.587Z,1516405065.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:45.956Z,1516405065.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:45.986Z,1516405065.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:46.353Z,1516405066.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:46.379Z,1516405066.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:46.778Z,1516405066.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:46.793Z,1516405066.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:47.178Z,1516405067.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:47.198Z,1516405067.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:47.566Z,1516405067.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:47.592Z,1516405067.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:47.955Z,1516405067.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:47.990Z,1516405067.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:48.355Z,1516405068.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:48.391Z,1516405068.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:48.760Z,1516405068.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:48.790Z,1516405068.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:49.159Z,1516405069.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:49.194Z,1516405069.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:49.566Z,1516405069.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:49.592Z,1516405069.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:49.984Z,1516405069.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:49.999Z,1516405069.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:50.366Z,1516405070.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:50.391Z,1516405070.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:50.756Z,1516405070.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:50.804Z,1516405070.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:51.149Z,1516405071.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:51.163Z,1516405071.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:51.566Z,1516405071.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:51.591Z,1516405071.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:51.970Z,1516405071.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:51.996Z,1516405071.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:52.361Z,1516405072.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:52.387Z,1516405072.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:52.760Z,1516405072.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:52.774Z,1516405072.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:53.163Z,1516405073.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:53.202Z,1516405073.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:53.562Z,1516405073.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:53.576Z,1516405073.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:53.970Z,1516405073.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:53.984Z,1516405073.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:54.370Z,1516405074.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:54.384Z,1516405074.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:54.765Z,1516405074.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:54.779Z,1516405074.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:55.164Z,1516405075.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:55.178Z,1516405075.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:55.570Z,1516405075.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:55.584Z,1516405075.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:55.978Z,1516405075.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:56.008Z,1516405076.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:56.382Z,1516405076.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:56.501Z,1516405076.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:56.765Z,1516405076.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:56.780Z,1516405076.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:57.164Z,1516405077.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:57.179Z,1516405077.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:57.578Z,1516405077.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:57.608Z,1516405077.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:57.978Z,1516405077.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:58.007Z,1516405078.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:58.378Z,1516405078.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:58.404Z,1516405078.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:58.766Z,1516405078.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:58.780Z,1516405078.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:59.165Z,1516405079.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:59.179Z,1516405079.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:59.566Z,1516405079.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:59.580Z,1516405079.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:37:59.970Z,1516405079.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:37:59.984Z,1516405079.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:00.378Z,1516405080.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:00.392Z,1516405080.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:00.768Z,1516405080.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:00.783Z,1516405080.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:01.165Z,1516405081.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:01.179Z,1516405081.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:01.570Z,1516405081.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:01.584Z,1516405081.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:01.970Z,1516405081.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:01.984Z,1516405081.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:02.370Z,1516405082.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:02.391Z,1516405082.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:02.767Z,1516405082.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:02.787Z,1516405082.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:03.169Z,1516405083.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:03.183Z,1516405083.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:03.571Z,1516405083.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:03.585Z,1516405083.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:03.975Z,1516405083.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:03.989Z,1516405083.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:04.371Z,1516405084.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:04.386Z,1516405084.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:07.511Z,1516405087.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:07.526Z,1516405087.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:07.625Z,1516405087.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:07.670Z,1516405087.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:07.991Z,1516405087.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:08.014Z,1516405088.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:08.390Z,1516405088.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:08.415Z,1516405088.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:08.786Z,1516405088.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:08.816Z,1516405088.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:09.180Z,1516405089.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:09.194Z,1516405089.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:09.576Z,1516405089.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:09.590Z,1516405089.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:09.980Z,1516405089.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:09.994Z,1516405089.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:10.376Z,1516405090.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:10.403Z,1516405090.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:10.795Z,1516405090.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:10.832Z,1516405090.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:11.180Z,1516405091.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:11.195Z,1516405091.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:11.582Z,1516405091.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:11.597Z,1516405091.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:11.979Z,1516405091.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:11.994Z,1516405091.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:12.375Z,1516405092.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:12.389Z,1516405092.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:12.776Z,1516405092.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:12.805Z,1516405092.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:13.180Z,1516405093.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:13.194Z,1516405093.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:13.580Z,1516405093.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:13.599Z,1516405093.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:13.994Z,1516405093.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:14.008Z,1516405094.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:14.386Z,1516405094.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:14.406Z,1516405094.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:14.783Z,1516405094.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:14.798Z,1516405094.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:15.179Z,1516405095.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:15.193Z,1516405095.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:15.585Z,1516405095.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:15.606Z,1516405095.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:15.990Z,1516405095.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:16.004Z,1516405096.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:16.386Z,1516405096.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:16.400Z,1516405096.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:16.776Z,1516405096.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:16.790Z,1516405096.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:17.176Z,1516405097.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:17.194Z,1516405097.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:17.584Z,1516405097.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:17.599Z,1516405097.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:17.986Z,1516405097.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:17.000Z,1516405098.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:18.384Z,1516405098.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:18.399Z,1516405098.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:18.782Z,1516405098.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:18.796Z,1516405098.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:19.183Z,1516405099.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:19.197Z,1516405099.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:19.583Z,1516405099.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:19.603Z,1516405099.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:19.990Z,1516405099.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:20.004Z,1516405100.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:20.386Z,1516405100.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:20.406Z,1516405100.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:20.783Z,1516405100.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:20.797Z,1516405100.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:21.174Z,1516405101.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:21.196Z,1516405101.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:21.594Z,1516405101.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:21.608Z,1516405101.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:21.993Z,1516405101.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:22.011Z,1516405102.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:22.393Z,1516405102.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:22.407Z,1516405102.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:22.785Z,1516405102.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:22.799Z,1516405102.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:23.177Z,1516405103.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:23.199Z,1516405103.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:23.594Z,1516405103.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:23.608Z,1516405103.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:23.994Z,1516405103.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:24.008Z,1516405104.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:24.390Z,1516405104.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:24.404Z,1516405104.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:24.772Z,1516405104.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:24.802Z,1516405104.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:25.167Z,1516405105.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:25.195Z,1516405105.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:25.586Z,1516405105.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:25.617Z,1516405105.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:25.997Z,1516405105.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:26.011Z,1516405106.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:26.395Z,1516405106.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:26.408Z,1516405106.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:26.784Z,1516405106.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:26.798Z,1516405106.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:27.171Z,1516405107.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:27.202Z,1516405107.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:27.585Z,1516405107.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:27.612Z,1516405107.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:27.997Z,1516405107.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:28.015Z,1516405108.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:28.394Z,1516405108.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:28.408Z,1516405108.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:28.772Z,1516405108.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:28.798Z,1516405108.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:29.165Z,1516405109.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:29.191Z,1516405109.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:29.594Z,1516405109.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:29.608Z,1516405109.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:29.994Z,1516405109.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:30.008Z,1516405110.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:30.390Z,1516405110.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:30.404Z,1516405110.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:30.771Z,1516405110.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:30.797Z,1516405110.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:31.168Z,1516405111.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:31.199Z,1516405111.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:31.569Z,1516405111.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:31.602Z,1516405111.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:32.000Z,1516405112.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:32.019Z,1516405112.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:32.399Z,1516405112.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:32.412Z,1516405112.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:32.794Z,1516405112.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:32.808Z,1516405112.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:33.170Z,1516405113.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:33.195Z,1516405113.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:33.567Z,1516405113.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:33.599Z,1516405113.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:33.972Z,1516405113.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:34.002Z,1516405114.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:34.374Z,1516405114.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:34.407Z,1516405114.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:34.787Z,1516405114.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:34.801Z,1516405114.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:35.182Z,1516405115.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:35.204Z,1516405115.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:35.590Z,1516405115.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:35.604Z,1516405115.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:35.971Z,1516405115.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:36.003Z,1516405116.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:36.369Z,1516405116.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:36.395Z,1516405116.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:36.771Z,1516405116.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:36.802Z,1516405116.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:37.168Z,1516405117.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:37.204Z,1516405117.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:37.565Z,1516405117.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:37.579Z,1516405117.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:37.995Z,1516405117.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:38.009Z,1516405118.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:38.382Z,1516405118.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:38.415Z,1516405118.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:38.794Z,1516405118.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:38.808Z,1516405118.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:39.171Z,1516405119.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:39.206Z,1516405119.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:39.575Z,1516405119.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:39.608Z,1516405119.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:39.973Z,1516405119.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:40.003Z,1516405120.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:40.375Z,1516405120.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:40.410Z,1516405120.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:40.786Z,1516405120.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:40.815Z,1516405120.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:41.182Z,1516405121.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:41.208Z,1516405121.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:41.582Z,1516405121.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:41.607Z,1516405121.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:41.976Z,1516405121.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:42.015Z,1516405122.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:42.366Z,1516405122.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:42.387Z,1516405122.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:42.774Z,1516405122.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:42.788Z,1516405122.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:43.176Z,1516405123.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:43.191Z,1516405123.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:43.570Z,1516405123.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:43.595Z,1516405123.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:43.995Z,1516405123.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:44.024Z,1516405124.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:44.394Z,1516405124.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:44.425Z,1516405124.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:44.795Z,1516405124.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:44.823Z,1516405124.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:45.177Z,1516405125.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:45.205Z,1516405125.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:45.584Z,1516405125.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:45.598Z,1516405125.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:45.984Z,1516405125.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:45.999Z,1516405125.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:46.384Z,1516405126.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:46.398Z,1516405126.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:46.787Z,1516405126.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:46.801Z,1516405126.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:47.182Z,1516405127.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:47.208Z,1516405127.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:47.594Z,1516405127.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:47.608Z,1516405127.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:47.972Z,1516405127.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:48.003Z,1516405128.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:48.370Z,1516405128.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:48.396Z,1516405128.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:48.771Z,1516405128.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:48.803Z,1516405128.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:49.172Z,1516405129.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:49.204Z,1516405129.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:49.569Z,1516405129.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:49.604Z,1516405129.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:49.990Z,1516405129.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:50.005Z,1516405130.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:50.391Z,1516405130.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:50.405Z,1516405130.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:50.795Z,1516405130.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:50.809Z,1516405130.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:51.171Z,1516405131.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:51.243Z,1516405131.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:51.623Z,1516405131.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:51.637Z,1516405131.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:51.971Z,1516405131.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:51.986Z,1516405131.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:52.381Z,1516405132.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:52.399Z,1516405132.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:52.787Z,1516405132.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:52.807Z,1516405132.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:53.188Z,1516405133.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:53.232Z,1516405133.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:53.587Z,1516405133.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:53.607Z,1516405133.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:53.980Z,1516405133.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:54.016Z,1516405134.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:54.381Z,1516405134.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:54.408Z,1516405134.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:54.778Z,1516405134.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:54.811Z,1516405134.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:55.193Z,1516405135.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:55.211Z,1516405135.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:55.573Z,1516405135.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:55.607Z,1516405135.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:55.984Z,1516405135.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:56.015Z,1516405136.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:56.388Z,1516405136.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:56.438Z,1516405136.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:56.784Z,1516405136.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:56.815Z,1516405136.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:57.204Z,1516405137.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:57.235Z,1516405137.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:57.589Z,1516405137.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:57.671Z,1516405137.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:57.980Z,1516405137.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:58.027Z,1516405138.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:58.381Z,1516405138.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:58.430Z,1516405138.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:58.787Z,1516405138.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:58.834Z,1516405138.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:59.188Z,1516405139.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:59.234Z,1516405139.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:59.587Z,1516405139.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:38:59.627Z,1516405139.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:38:59.990Z,1516405139.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:00.015Z,1516405140.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:00.378Z,1516405140.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:00.413Z,1516405140.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:00.778Z,1516405140.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:00.800Z,1516405140.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:01.174Z,1516405141.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:01.239Z,1516405141.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:01.573Z,1516405141.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:01.606Z,1516405141.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:01.990Z,1516405141.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:02.004Z,1516405142.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:02.394Z,1516405142.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:02.408Z,1516405142.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:02.794Z,1516405142.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:02.808Z,1516405142.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:03.171Z,1516405143.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:03.196Z,1516405143.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:03.571Z,1516405143.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:03.599Z,1516405143.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:03.976Z,1516405143.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:04.001Z,1516405144.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:04.371Z,1516405144.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:04.397Z,1516405144.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:07.496Z,1516405147.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:07.510Z,1516405147.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:07.622Z,1516405147.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:07.663Z,1516405147.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:07.970Z,1516405147.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:07.993Z,1516405147.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:08.364Z,1516405148.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:08.398Z,1516405148.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:08.760Z,1516405148.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:08.775Z,1516405148.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:09.157Z,1516405149.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:09.171Z,1516405149.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:09.563Z,1516405149.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:09.599Z,1516405149.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:09.974Z,1516405149.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:10.004Z,1516405150.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:10.378Z,1516405150.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:10.408Z,1516405150.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:10.770Z,1516405150.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:10.784Z,1516405150.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:11.164Z,1516405151.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:11.183Z,1516405151.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:11.564Z,1516405151.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:11.583Z,1516405151.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:11.966Z,1516405151.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:11.980Z,1516405151.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:12.359Z,1516405152.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:12.373Z,1516405152.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:12.766Z,1516405152.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:12.780Z,1516405152.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:13.170Z,1516405153.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:13.184Z,1516405153.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:13.218Z,1516405153.218 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T23:39:13.578Z,1516405153.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:13.592Z,1516405153.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:13.962Z,1516405153.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:13.983Z,1516405153.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:14.367Z,1516405154.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:14.381Z,1516405154.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:14.763Z,1516405154.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:14.777Z,1516405154.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:15.162Z,1516405155.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:15.180Z,1516405155.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:15.568Z,1516405155.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:15.583Z,1516405155.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:15.970Z,1516405155.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:15.984Z,1516405155.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:16.374Z,1516405156.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:16.388Z,1516405156.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:16.771Z,1516405156.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:16.785Z,1516405156.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:17.165Z,1516405157.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:17.183Z,1516405157.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:17.568Z,1516405157.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:17.582Z,1516405157.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:17.970Z,1516405157.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:17.984Z,1516405157.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:18.368Z,1516405158.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:18.383Z,1516405158.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:18.771Z,1516405158.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:18.785Z,1516405158.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:19.170Z,1516405159.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:19.184Z,1516405159.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:19.571Z,1516405159.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:19.585Z,1516405159.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:19.966Z,1516405159.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:19.981Z,1516405159.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:20.368Z,1516405160.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:20.383Z,1516405160.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:20.768Z,1516405160.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:20.783Z,1516405160.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:21.163Z,1516405161.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:21.182Z,1516405161.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:21.565Z,1516405161.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:21.579Z,1516405161.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:21.971Z,1516405161.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:21.985Z,1516405161.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:22.369Z,1516405162.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:22.383Z,1516405162.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:22.770Z,1516405162.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:22.790Z,1516405162.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:23.172Z,1516405163.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:23.257Z,1516405163.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:23.567Z,1516405163.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:23.582Z,1516405163.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:23.966Z,1516405163.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:23.980Z,1516405163.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:24.364Z,1516405164.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:24.378Z,1516405164.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:24.771Z,1516405164.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:24.785Z,1516405164.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:25.170Z,1516405165.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:25.184Z,1516405165.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:25.570Z,1516405165.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:25.584Z,1516405165.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:25.966Z,1516405165.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:25.981Z,1516405165.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:26.368Z,1516405166.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:26.382Z,1516405166.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:26.767Z,1516405166.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:26.782Z,1516405166.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:27.173Z,1516405167.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:27.188Z,1516405167.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:27.563Z,1516405167.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:27.577Z,1516405167.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:27.973Z,1516405167.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:27.991Z,1516405167.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:28.374Z,1516405168.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:28.388Z,1516405168.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:28.770Z,1516405168.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:28.784Z,1516405168.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:29.163Z,1516405169.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:29.177Z,1516405169.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:29.571Z,1516405169.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:29.591Z,1516405169.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:29.969Z,1516405169.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:29.983Z,1516405169.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:30.367Z,1516405170.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:30.387Z,1516405170.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:30.773Z,1516405170.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:30.787Z,1516405170.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:31.174Z,1516405171.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:31.188Z,1516405171.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:31.573Z,1516405171.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:31.595Z,1516405171.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:31.967Z,1516405171.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:31.987Z,1516405171.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:32.367Z,1516405172.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:32.381Z,1516405172.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:32.764Z,1516405172.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:32.783Z,1516405172.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:33.168Z,1516405173.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:33.182Z,1516405173.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:33.551Z,1516405173.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:33.585Z,1516405173.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:33.977Z,1516405173.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:33.991Z,1516405173.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:34.376Z,1516405174.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:34.395Z,1516405174.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:34.778Z,1516405174.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:34.791Z,1516405174.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:35.167Z,1516405175.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:35.187Z,1516405175.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:35.567Z,1516405175.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:35.587Z,1516405175.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:35.969Z,1516405175.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:35.982Z,1516405175.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:36.367Z,1516405176.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:36.381Z,1516405176.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:36.773Z,1516405176.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:36.787Z,1516405176.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:37.178Z,1516405177.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:37.191Z,1516405177.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:37.577Z,1516405177.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:37.591Z,1516405177.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:37.967Z,1516405177.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:37.987Z,1516405177.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:38.368Z,1516405178.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:38.381Z,1516405178.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:38.767Z,1516405178.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:38.787Z,1516405178.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:39.168Z,1516405179.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:39.182Z,1516405179.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:39.562Z,1516405179.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:39.587Z,1516405179.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:39.977Z,1516405179.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:39.991Z,1516405179.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:40.376Z,1516405180.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:40.399Z,1516405180.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:40.778Z,1516405180.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:40.798Z,1516405180.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:41.165Z,1516405181.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:41.179Z,1516405181.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:41.558Z,1516405181.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:41.580Z,1516405181.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:41.963Z,1516405181.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:41.982Z,1516405181.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:42.367Z,1516405182.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:42.387Z,1516405182.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:42.777Z,1516405182.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:42.791Z,1516405182.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:43.177Z,1516405183.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:43.191Z,1516405183.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:43.578Z,1516405183.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:43.592Z,1516405183.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:43.967Z,1516405183.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:43.987Z,1516405183.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:44.368Z,1516405184.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:44.381Z,1516405184.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:44.767Z,1516405184.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:44.787Z,1516405184.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:45.166Z,1516405185.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:45.180Z,1516405185.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:45.564Z,1516405185.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:45.578Z,1516405185.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:45.977Z,1516405185.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:45.999Z,1516405185.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:46.376Z,1516405186.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:46.395Z,1516405186.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:46.778Z,1516405186.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:46.792Z,1516405186.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:47.168Z,1516405187.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:47.187Z,1516405187.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:47.567Z,1516405187.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:47.587Z,1516405187.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:47.969Z,1516405187.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:47.983Z,1516405187.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:48.370Z,1516405188.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:48.384Z,1516405188.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:48.777Z,1516405188.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:48.791Z,1516405188.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:49.177Z,1516405189.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:49.195Z,1516405189.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:49.581Z,1516405189.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:49.603Z,1516405189.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:49.968Z,1516405189.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:49.983Z,1516405189.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:50.352Z,1516405190.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:50.378Z,1516405190.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:50.766Z,1516405190.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:50.784Z,1516405190.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:51.172Z,1516405191.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:51.186Z,1516405191.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:51.552Z,1516405191.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:51.589Z,1516405191.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:51.979Z,1516405191.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:51.999Z,1516405191.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:52.380Z,1516405192.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:52.399Z,1516405192.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:52.778Z,1516405192.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:52.792Z,1516405192.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:53.170Z,1516405193.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:53.184Z,1516405193.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:53.565Z,1516405193.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:53.586Z,1516405193.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:53.956Z,1516405193.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:54.099Z,1516405194.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:54.353Z,1516405194.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:54.383Z,1516405194.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:54.783Z,1516405194.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:54.803Z,1516405194.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:55.182Z,1516405195.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:55.196Z,1516405195.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:55.568Z,1516405195.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:55.589Z,1516405195.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:55.977Z,1516405195.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:55.991Z,1516405195.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:56.376Z,1516405196.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:56.390Z,1516405196.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:56.781Z,1516405196.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:56.795Z,1516405196.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:57.180Z,1516405197.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:57.194Z,1516405197.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:57.580Z,1516405197.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:57.593Z,1516405197.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:57.952Z,1516405197.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:57.983Z,1516405197.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:58.358Z,1516405198.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:58.395Z,1516405198.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:58.772Z,1516405198.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:58.786Z,1516405198.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:59.171Z,1516405199.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:59.186Z,1516405199.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:59.555Z,1516405199.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:59.599Z,1516405199.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:39:59.985Z,1516405199.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:39:59.992Z,1516405199.992 [PNI_TCM](ERROR): CRC does not match. Expected:0x13059 got:0x5694
2018-01-19T23:40:00.028Z,1516405200.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:00.370Z,1516405200.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:00.400Z,1516405200.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:00.782Z,1516405200.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:00.796Z,1516405200.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:01.151Z,1516405201.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:01.187Z,1516405201.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:01.187Z,1516405201.187 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-01-19T23:40:01.187Z,1516405201.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:40:01.189Z,1516405201.189 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:01.189Z,1516405201.189 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-01-19T23:40:01.189Z,1516405201.189 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:40:01.191Z,1516405201.191 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:01.191Z,1516405201.191 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50
2018-01-19T23:40:01.191Z,1516405201.191 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:40:01.203Z,1516405201.203 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:40:01.203Z,1516405201.203 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:40:01.203Z,1516405201.203 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:40:01.551Z,1516405201.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:01.603Z,1516405201.603 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:40:01.604Z,1516405201.604 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-01-19T23:40:01.604Z,1516405201.604 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:40:01.604Z,1516405201.604 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-01-19T23:40:01.606Z,1516405201.606 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:40:01.606Z,1516405201.606 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50
2018-01-19T23:40:01.970Z,1516405201.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:01.983Z,1516405201.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:40:01.984Z,1516405201.984 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:40:01.984Z,1516405201.984 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:40:01.985Z,1516405201.985 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:40:01.985Z,1516405201.985 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:40:01.985Z,1516405201.985 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:40:01.986Z,1516405201.986 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:40:01.986Z,1516405201.986 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:40:01.987Z,1516405201.987 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:40:02.361Z,1516405202.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:02.396Z,1516405202.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:40:02.397Z,1516405202.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:02.786Z,1516405202.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:02.800Z,1516405202.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:40:02.801Z,1516405202.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:03.185Z,1516405203.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:03.199Z,1516405203.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:40:03.200Z,1516405203.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:03.576Z,1516405203.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:03.594Z,1516405203.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:40:03.595Z,1516405203.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:03.964Z,1516405203.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:03.988Z,1516405203.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:40:03.990Z,1516405203.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:04.354Z,1516405204.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:04.388Z,1516405204.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:40:04.389Z,1516405204.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:04.773Z,1516405204.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:04.798Z,1516405204.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:40:04.799Z,1516405204.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:07.886Z,1516405207.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:07.900Z,1516405207.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-01-19T23:40:07.901Z,1516405207.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:08.018Z,1516405208.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:08.046Z,1516405208.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-01-19T23:40:08.047Z,1516405208.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:08.356Z,1516405208.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:08.423Z,1516405208.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:40:08.424Z,1516405208.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:08.763Z,1516405208.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:08.776Z,1516405208.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:40:08.777Z,1516405208.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:09.159Z,1516405209.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:09.202Z,1516405209.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:40:09.202Z,1516405209.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:09.558Z,1516405209.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:09.575Z,1516405209.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:40:09.576Z,1516405209.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:09.964Z,1516405209.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:09.979Z,1516405209.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:40:09.980Z,1516405209.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:10.368Z,1516405210.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:10.386Z,1516405210.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:40:10.387Z,1516405210.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:10.764Z,1516405210.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:10.804Z,1516405210.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:40:10.805Z,1516405210.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:11.153Z,1516405211.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:11.166Z,1516405211.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:40:11.167Z,1516405211.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:11.559Z,1516405211.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:11.577Z,1516405211.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:40:11.578Z,1516405211.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:11.955Z,1516405211.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:11.976Z,1516405211.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:40:11.977Z,1516405211.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:12.352Z,1516405212.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:12.374Z,1516405212.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:40:12.375Z,1516405212.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:12.764Z,1516405212.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:12.785Z,1516405212.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:40:12.786Z,1516405212.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:13.167Z,1516405213.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:13.183Z,1516405213.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:40:13.184Z,1516405213.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:13.567Z,1516405213.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:13.581Z,1516405213.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:40:13.582Z,1516405213.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:13.960Z,1516405213.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:14.005Z,1516405214.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:40:14.006Z,1516405214.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:14.355Z,1516405214.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:14.368Z,1516405214.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:40:14.369Z,1516405214.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:14.765Z,1516405214.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:14.782Z,1516405214.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:40:14.783Z,1516405214.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:15.169Z,1516405215.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:15.195Z,1516405215.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:40:15.196Z,1516405215.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:15.569Z,1516405215.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:15.614Z,1516405215.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:40:15.615Z,1516405215.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:15.961Z,1516405215.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:15.974Z,1516405215.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:40:15.975Z,1516405215.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:16.360Z,1516405216.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:16.381Z,1516405216.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:40:16.382Z,1516405216.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:16.768Z,1516405216.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:16.783Z,1516405216.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:40:16.784Z,1516405216.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:17.166Z,1516405217.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:17.215Z,1516405217.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:40:17.216Z,1516405217.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:17.570Z,1516405217.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:17.586Z,1516405217.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:40:17.588Z,1516405217.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:17.948Z,1516405217.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:17.982Z,1516405217.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:40:17.983Z,1516405217.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:18.360Z,1516405218.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:18.377Z,1516405218.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:40:18.378Z,1516405218.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:18.770Z,1516405218.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:18.784Z,1516405218.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:40:18.785Z,1516405218.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:19.172Z,1516405219.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:19.194Z,1516405219.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:40:19.195Z,1516405219.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:19.570Z,1516405219.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:19.588Z,1516405219.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:40:19.589Z,1516405219.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:19.961Z,1516405219.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:19.979Z,1516405219.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T23:40:19.980Z,1516405219.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:20.367Z,1516405220.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:20.386Z,1516405220.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T23:40:20.387Z,1516405220.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:20.771Z,1516405220.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:20.784Z,1516405220.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:40:20.785Z,1516405220.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:21.171Z,1516405221.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:21.189Z,1516405221.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:21.571Z,1516405221.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:21.587Z,1516405221.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:21.948Z,1516405221.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:21.987Z,1516405221.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:22.358Z,1516405222.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:22.376Z,1516405222.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:22.766Z,1516405222.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:22.782Z,1516405222.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:23.174Z,1516405223.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:23.190Z,1516405223.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:23.569Z,1516405223.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:23.618Z,1516405223.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:23.948Z,1516405223.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:23.973Z,1516405223.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:24.347Z,1516405224.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:24.373Z,1516405224.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:24.769Z,1516405224.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:24.787Z,1516405224.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:25.172Z,1516405225.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:25.191Z,1516405225.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:25.570Z,1516405225.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:25.584Z,1516405225.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:25.965Z,1516405225.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:25.985Z,1516405225.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:26.359Z,1516405226.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:26.382Z,1516405226.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:26.761Z,1516405226.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:26.784Z,1516405226.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:27.172Z,1516405227.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:27.191Z,1516405227.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:27.570Z,1516405227.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:27.584Z,1516405227.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:27.961Z,1516405227.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:27.975Z,1516405227.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:28.359Z,1516405228.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:28.379Z,1516405228.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:28.762Z,1516405228.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:28.793Z,1516405228.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:29.174Z,1516405229.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:29.188Z,1516405229.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:29.570Z,1516405229.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:29.588Z,1516405229.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:29.951Z,1516405229.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:29.976Z,1516405229.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:30.344Z,1516405230.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:30.375Z,1516405230.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:30.751Z,1516405230.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:30.776Z,1516405230.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:31.164Z,1516405231.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:31.185Z,1516405231.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:31.575Z,1516405231.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:31.589Z,1516405231.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:31.971Z,1516405231.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:31.985Z,1516405231.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:32.348Z,1516405232.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:32.418Z,1516405232.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:32.752Z,1516405232.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:32.778Z,1516405232.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:33.163Z,1516405233.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:33.177Z,1516405233.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:33.548Z,1516405233.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:33.573Z,1516405233.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:33.972Z,1516405233.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:33.986Z,1516405233.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:34.361Z,1516405234.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:34.393Z,1516405234.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:34.772Z,1516405234.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:34.786Z,1516405234.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:35.148Z,1516405235.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:35.185Z,1516405235.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:35.546Z,1516405235.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:35.560Z,1516405235.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:35.952Z,1516405235.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:35.987Z,1516405235.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:36.352Z,1516405236.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:36.392Z,1516405236.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:36.751Z,1516405236.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:36.787Z,1516405236.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:37.158Z,1516405237.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:37.191Z,1516405237.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:37.562Z,1516405237.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:37.590Z,1516405237.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:37.964Z,1516405237.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:37.996Z,1516405237.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:38.347Z,1516405238.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:38.383Z,1516405238.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:38.755Z,1516405238.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:38.793Z,1516405238.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:39.149Z,1516405239.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:39.187Z,1516405239.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:39.555Z,1516405239.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:39.591Z,1516405239.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:39.966Z,1516405239.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:39.998Z,1516405239.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:40.354Z,1516405240.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:40.368Z,1516405240.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:40.770Z,1516405240.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:40.792Z,1516405240.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:41.153Z,1516405241.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:41.185Z,1516405241.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:41.553Z,1516405241.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:41.567Z,1516405241.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:41.958Z,1516405241.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:41.979Z,1516405241.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:42.358Z,1516405242.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:42.371Z,1516405242.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:42.751Z,1516405242.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:42.771Z,1516405242.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:43.171Z,1516405243.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:43.201Z,1516405243.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:43.567Z,1516405243.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:43.581Z,1516405243.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:43.965Z,1516405243.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:43.980Z,1516405243.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:44.355Z,1516405244.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:44.370Z,1516405244.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:44.757Z,1516405244.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:44.771Z,1516405244.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:45.159Z,1516405245.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:45.179Z,1516405245.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:45.554Z,1516405245.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:45.568Z,1516405245.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:45.962Z,1516405245.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:45.982Z,1516405245.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:46.358Z,1516405246.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:46.387Z,1516405246.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:46.764Z,1516405246.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:46.783Z,1516405246.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:47.160Z,1516405247.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:47.173Z,1516405247.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:47.553Z,1516405247.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:47.567Z,1516405247.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:47.951Z,1516405247.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:47.982Z,1516405247.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:48.348Z,1516405248.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:48.390Z,1516405248.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:48.751Z,1516405248.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:48.786Z,1516405248.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:49.158Z,1516405249.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:49.183Z,1516405249.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:49.558Z,1516405249.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:49.591Z,1516405249.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:49.962Z,1516405249.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:49.994Z,1516405249.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:50.359Z,1516405250.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:50.387Z,1516405250.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:50.752Z,1516405250.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:50.786Z,1516405250.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:51.149Z,1516405251.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:51.183Z,1516405251.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:51.555Z,1516405251.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:51.587Z,1516405251.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:51.966Z,1516405251.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:51.994Z,1516405251.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:52.362Z,1516405252.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:52.385Z,1516405252.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:52.776Z,1516405252.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:52.790Z,1516405252.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:53.152Z,1516405253.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:53.191Z,1516405253.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:53.543Z,1516405253.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:53.569Z,1516405253.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:53.952Z,1516405253.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:53.971Z,1516405253.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:54.352Z,1516405254.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:54.386Z,1516405254.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:54.751Z,1516405254.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:54.771Z,1516405254.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:55.166Z,1516405255.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:55.195Z,1516405255.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:55.570Z,1516405255.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:55.593Z,1516405255.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:55.966Z,1516405255.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:55.995Z,1516405255.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:56.352Z,1516405256.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:56.374Z,1516405256.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:56.756Z,1516405256.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:56.770Z,1516405256.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:57.157Z,1516405257.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:57.171Z,1516405257.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:57.553Z,1516405257.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:57.572Z,1516405257.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:57.957Z,1516405257.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:57.978Z,1516405257.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:58.355Z,1516405258.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:58.375Z,1516405258.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:58.770Z,1516405258.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:58.784Z,1516405258.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:59.159Z,1516405259.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:59.173Z,1516405259.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:59.546Z,1516405259.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:59.566Z,1516405259.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:40:59.952Z,1516405259.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:40:59.974Z,1516405259.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:00.361Z,1516405260.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:00.374Z,1516405260.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:00.753Z,1516405260.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:00.767Z,1516405260.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:01.160Z,1516405261.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:01.183Z,1516405261.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:01.569Z,1516405261.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:01.583Z,1516405261.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:01.969Z,1516405261.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:01.983Z,1516405261.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:02.350Z,1516405262.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:02.372Z,1516405262.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:02.756Z,1516405262.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:02.770Z,1516405262.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:03.160Z,1516405263.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:03.174Z,1516405263.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:03.563Z,1516405263.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:03.583Z,1516405263.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:03.970Z,1516405263.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:03.984Z,1516405263.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:04.358Z,1516405264.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:04.385Z,1516405264.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:04.766Z,1516405264.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:04.780Z,1516405264.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:05.148Z,1516405265.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:05.179Z,1516405265.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:08.243Z,1516405268.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:08.271Z,1516405268.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:08.378Z,1516405268.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:08.420Z,1516405268.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:08.742Z,1516405268.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:08.771Z,1516405268.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:09.134Z,1516405269.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:09.147Z,1516405269.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:09.530Z,1516405269.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:09.545Z,1516405269.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:09.929Z,1516405269.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:09.943Z,1516405269.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:10.331Z,1516405270.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:10.344Z,1516405270.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:10.720Z,1516405270.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:10.750Z,1516405270.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:11.143Z,1516405271.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:11.175Z,1516405271.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:11.535Z,1516405271.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:11.549Z,1516405271.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:11.943Z,1516405271.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:11.974Z,1516405271.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:12.332Z,1516405272.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:12.347Z,1516405272.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:12.732Z,1516405272.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:12.747Z,1516405272.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:13.132Z,1516405273.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:13.147Z,1516405273.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:13.531Z,1516405273.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:13.551Z,1516405273.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:13.934Z,1516405273.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:13.949Z,1516405273.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:14.333Z,1516405274.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:14.348Z,1516405274.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:14.733Z,1516405274.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:14.755Z,1516405274.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:15.132Z,1516405275.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:15.146Z,1516405275.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:15.526Z,1516405275.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:15.540Z,1516405275.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:15.928Z,1516405275.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:15.942Z,1516405275.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:16.326Z,1516405276.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:16.340Z,1516405276.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:16.722Z,1516405276.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:16.741Z,1516405276.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:17.133Z,1516405277.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:17.148Z,1516405277.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:17.534Z,1516405277.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:17.548Z,1516405277.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:17.935Z,1516405277.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:17.979Z,1516405277.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:18.327Z,1516405278.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:18.342Z,1516405278.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:18.724Z,1516405278.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:18.738Z,1516405278.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:19.131Z,1516405279.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:19.147Z,1516405279.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:19.526Z,1516405279.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:19.540Z,1516405279.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:19.933Z,1516405279.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:19.955Z,1516405279.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:20.333Z,1516405280.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:20.348Z,1516405280.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:20.732Z,1516405280.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:20.751Z,1516405280.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:21.132Z,1516405281.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:21.146Z,1516405281.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:21.524Z,1516405281.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:21.542Z,1516405281.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:21.924Z,1516405281.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:21.951Z,1516405281.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:22.333Z,1516405282.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:22.347Z,1516405282.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:22.725Z,1516405282.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:22.740Z,1516405282.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:23.137Z,1516405283.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:23.152Z,1516405283.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:23.537Z,1516405283.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:23.551Z,1516405283.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:23.934Z,1516405283.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:23.954Z,1516405283.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:24.331Z,1516405284.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:24.351Z,1516405284.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:24.732Z,1516405284.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:24.746Z,1516405284.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:25.132Z,1516405285.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:25.147Z,1516405285.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:25.532Z,1516405285.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:25.546Z,1516405285.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:25.935Z,1516405285.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:25.949Z,1516405285.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:26.337Z,1516405286.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:26.351Z,1516405286.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:26.736Z,1516405286.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:26.750Z,1516405286.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:27.122Z,1516405287.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:27.146Z,1516405287.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:27.524Z,1516405287.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:27.542Z,1516405287.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:27.922Z,1516405287.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:27.944Z,1516405287.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:28.322Z,1516405288.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:28.347Z,1516405288.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:28.724Z,1516405288.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:28.742Z,1516405288.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:29.137Z,1516405289.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:29.152Z,1516405289.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:29.537Z,1516405289.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:29.558Z,1516405289.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:29.937Z,1516405289.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:29.951Z,1516405289.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:30.331Z,1516405290.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:30.351Z,1516405290.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:30.732Z,1516405290.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:30.746Z,1516405290.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:31.132Z,1516405291.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:31.151Z,1516405291.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:31.524Z,1516405291.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:31.544Z,1516405291.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:31.938Z,1516405291.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:31.952Z,1516405291.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:32.333Z,1516405292.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:32.348Z,1516405292.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:32.736Z,1516405292.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:32.751Z,1516405292.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:33.132Z,1516405293.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:33.146Z,1516405293.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:33.525Z,1516405293.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:33.539Z,1516405293.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:33.925Z,1516405293.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:33.944Z,1516405293.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:34.322Z,1516405294.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:34.347Z,1516405294.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:34.724Z,1516405294.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:34.742Z,1516405294.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:35.132Z,1516405295.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:35.162Z,1516405295.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:35.538Z,1516405295.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:35.552Z,1516405295.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:35.937Z,1516405295.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:35.951Z,1516405295.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:36.325Z,1516405296.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:36.344Z,1516405296.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:36.722Z,1516405296.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:36.747Z,1516405296.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:37.132Z,1516405297.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:37.147Z,1516405297.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:37.525Z,1516405297.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:37.544Z,1516405297.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:37.934Z,1516405297.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:37.949Z,1516405297.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:38.337Z,1516405298.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:38.351Z,1516405298.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:38.736Z,1516405298.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:38.750Z,1516405298.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:39.132Z,1516405299.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:39.146Z,1516405299.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:39.525Z,1516405299.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:39.539Z,1516405299.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:39.935Z,1516405299.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:39.955Z,1516405299.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:40.333Z,1516405300.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:40.347Z,1516405300.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:40.725Z,1516405300.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:40.739Z,1516405300.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:41.136Z,1516405301.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:41.155Z,1516405301.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:41.538Z,1516405301.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:41.552Z,1516405301.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:41.937Z,1516405301.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:41.951Z,1516405301.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:42.325Z,1516405302.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:42.344Z,1516405302.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:42.722Z,1516405302.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:42.747Z,1516405302.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:43.132Z,1516405303.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:43.147Z,1516405303.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:43.525Z,1516405303.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:43.552Z,1516405303.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:43.937Z,1516405303.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:43.952Z,1516405303.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:44.336Z,1516405304.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:44.351Z,1516405304.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:44.736Z,1516405304.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:44.751Z,1516405304.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:45.125Z,1516405305.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:45.139Z,1516405305.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:45.518Z,1516405305.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:45.547Z,1516405305.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:45.942Z,1516405305.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:45.963Z,1516405305.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:46.342Z,1516405306.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:46.356Z,1516405306.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:46.737Z,1516405306.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:46.756Z,1516405306.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:47.137Z,1516405307.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:47.151Z,1516405307.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:47.520Z,1516405307.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:47.552Z,1516405307.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:47.946Z,1516405307.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:47.961Z,1516405307.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:48.343Z,1516405308.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:48.357Z,1516405308.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:48.737Z,1516405308.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:48.758Z,1516405308.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:49.136Z,1516405309.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:49.150Z,1516405309.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:49.519Z,1516405309.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:49.556Z,1516405309.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:49.938Z,1516405309.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:49.952Z,1516405309.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:50.340Z,1516405310.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:50.355Z,1516405310.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:50.738Z,1516405310.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:50.758Z,1516405310.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:51.120Z,1516405311.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:51.149Z,1516405311.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:51.518Z,1516405311.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:51.552Z,1516405311.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:51.952Z,1516405311.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:51.971Z,1516405311.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:52.347Z,1516405312.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:52.362Z,1516405312.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:52.734Z,1516405312.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:52.756Z,1516405312.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:53.121Z,1516405313.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:53.150Z,1516405313.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:53.515Z,1516405313.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:53.552Z,1516405313.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:53.944Z,1516405313.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:53.958Z,1516405313.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:54.343Z,1516405314.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:54.357Z,1516405314.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:54.726Z,1516405314.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:54.760Z,1516405314.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:55.124Z,1516405315.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:55.150Z,1516405315.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:55.519Z,1516405315.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:55.551Z,1516405315.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:55.926Z,1516405315.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:55.953Z,1516405315.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:56.338Z,1516405316.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:56.356Z,1516405316.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:56.738Z,1516405316.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:56.752Z,1516405316.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:57.116Z,1516405317.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:57.151Z,1516405317.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:57.513Z,1516405317.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:57.527Z,1516405317.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:57.950Z,1516405317.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:57.974Z,1516405317.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:58.330Z,1516405318.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:58.356Z,1516405318.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:58.726Z,1516405318.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:58.758Z,1516405318.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:59.124Z,1516405319.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:59.154Z,1516405319.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:59.515Z,1516405319.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:59.558Z,1516405319.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:41:59.942Z,1516405319.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:41:59.957Z,1516405319.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:00.342Z,1516405320.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:00.359Z,1516405320.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:00.725Z,1516405320.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:00.759Z,1516405320.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:01.124Z,1516405321.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:01.154Z,1516405321.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:01.519Z,1516405321.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:01.554Z,1516405321.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:01.926Z,1516405321.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:01.959Z,1516405321.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:02.330Z,1516405322.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:02.367Z,1516405322.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:02.734Z,1516405322.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:02.763Z,1516405322.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:03.125Z,1516405323.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:03.158Z,1516405323.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:03.527Z,1516405323.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:03.556Z,1516405323.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:03.949Z,1516405323.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:03.967Z,1516405323.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:03.971Z,1516405323.971 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T23:37:03.6Z
2018-01-19T23:42:03.971Z,1516405323.971 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T23:42:03.971Z,1516405323.971 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T23:42:04.343Z,1516405324.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:04.357Z,1516405324.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:04.778Z,1516405324.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:04.808Z,1516405324.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:05.128Z,1516405325.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:05.162Z,1516405325.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:08.219Z,1516405328.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:08.233Z,1516405328.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:08.313Z,1516405328.313 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0060.lzma
2018-01-19T23:42:08.333Z,1516405328.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:08.373Z,1516405328.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:08.734Z,1516405328.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:08.764Z,1516405328.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:09.095Z,1516405329.095 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0060.lzma.bak
2018-01-19T23:42:09.095Z,1516405329.095 [DataOverHttps](INFO): SBD MOMSN=7724991
2018-01-19T23:42:09.146Z,1516405329.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:09.178Z,1516405329.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:09.618Z,1516405329.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:09.632Z,1516405329.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:09.919Z,1516405329.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:09.939Z,1516405329.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:13.025Z,1516405333.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:13.039Z,1516405333.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:13.135Z,1516405333.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:13.178Z,1516405333.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:13.528Z,1516405333.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:13.547Z,1516405333.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:13.934Z,1516405333.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:13.949Z,1516405333.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:14.325Z,1516405334.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:14.339Z,1516405334.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:14.720Z,1516405334.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:14.734Z,1516405334.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:17.808Z,1516405337.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:17.832Z,1516405337.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:17.914Z,1516405337.914 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180119T210901/Express0061.lzma
2018-01-19T23:42:17.935Z,1516405337.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:17.982Z,1516405337.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:18.298Z,1516405338.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:18.328Z,1516405338.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:18.659Z,1516405338.659 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0061.lzma.bak
2018-01-19T23:42:18.659Z,1516405338.659 [DataOverHttps](INFO): SBD MOMSN=7724993
2018-01-19T23:42:18.720Z,1516405338.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:18.734Z,1516405338.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:19.182Z,1516405339.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:19.196Z,1516405339.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:19.199Z,1516405339.199 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T23:42:19.199Z,1516405339.199 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T23:42:19.199Z,1516405339.199 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T23:42:19.484Z,1516405339.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:19.507Z,1516405339.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:22.631Z,1516405342.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:22.644Z,1516405342.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:22.740Z,1516405342.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:22.786Z,1516405342.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:23.080Z,1516405343.080 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T23:42:23.081Z,1516405343.081 [NAL9602] Data Fault, FailCount= 4
2018-01-19T23:42:23.081Z,1516405343.081 [NAL9602](ERROR): Data Fault
2018-01-19T23:42:23.098Z,1516405343.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:23.112Z,1516405343.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:23.158Z,1516405343.158 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T23:42:23.486Z,1516405343.486 [NAL9602](INFO): Powering down
2018-01-19T23:42:23.504Z,1516405343.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:23.535Z,1516405343.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:23.895Z,1516405343.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:23.910Z,1516405343.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:24.295Z,1516405344.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:24.309Z,1516405344.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:24.358Z,1516405344.358 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T23:42:24.358Z,1516405344.358 [NAL9602] No Fault, FailCount= 4
2018-01-19T23:42:24.694Z,1516405344.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:24.708Z,1516405344.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:25.097Z,1516405345.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:25.111Z,1516405345.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:25.504Z,1516405345.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:25.518Z,1516405345.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:25.892Z,1516405345.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:25.907Z,1516405345.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:26.304Z,1516405346.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:26.318Z,1516405346.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:26.701Z,1516405346.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:26.716Z,1516405346.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:27.093Z,1516405347.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:27.107Z,1516405347.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:27.494Z,1516405347.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:27.508Z,1516405347.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:27.898Z,1516405347.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:27.912Z,1516405347.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:28.292Z,1516405348.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:28.306Z,1516405348.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:28.694Z,1516405348.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:28.708Z,1516405348.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:29.097Z,1516405349.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:29.112Z,1516405349.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:29.496Z,1516405349.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:29.510Z,1516405349.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:29.895Z,1516405349.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:29.909Z,1516405349.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:30.297Z,1516405350.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:30.311Z,1516405350.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:30.696Z,1516405350.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:30.710Z,1516405350.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:31.100Z,1516405351.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:31.114Z,1516405351.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:31.498Z,1516405351.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:31.512Z,1516405351.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:31.900Z,1516405351.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:31.913Z,1516405351.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:32.298Z,1516405352.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:32.312Z,1516405352.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:32.697Z,1516405352.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:32.711Z,1516405352.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:33.127Z,1516405353.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:33.221Z,1516405353.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:33.500Z,1516405353.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:33.514Z,1516405353.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:33.898Z,1516405353.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:33.912Z,1516405353.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:34.295Z,1516405354.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:34.308Z,1516405354.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:34.700Z,1516405354.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:34.714Z,1516405354.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:35.106Z,1516405355.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:35.120Z,1516405355.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:35.492Z,1516405355.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:35.506Z,1516405355.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:35.898Z,1516405355.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:35.912Z,1516405355.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:36.299Z,1516405356.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:36.313Z,1516405356.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:36.697Z,1516405356.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:36.711Z,1516405356.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:37.100Z,1516405357.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:37.114Z,1516405357.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:37.497Z,1516405357.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:37.511Z,1516405357.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:37.900Z,1516405357.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:37.913Z,1516405357.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:38.300Z,1516405358.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:38.314Z,1516405358.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:38.699Z,1516405358.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:38.713Z,1516405358.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:39.096Z,1516405359.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:39.110Z,1516405359.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:39.500Z,1516405359.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:39.514Z,1516405359.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:39.897Z,1516405359.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:39.911Z,1516405359.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:40.294Z,1516405360.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:40.308Z,1516405360.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:40.700Z,1516405360.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:40.714Z,1516405360.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:41.106Z,1516405361.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:41.120Z,1516405361.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:41.492Z,1516405361.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:41.506Z,1516405361.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:41.900Z,1516405361.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:41.914Z,1516405361.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:42.297Z,1516405362.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:42.311Z,1516405362.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:42.696Z,1516405362.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:42.710Z,1516405362.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:43.100Z,1516405363.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:43.114Z,1516405363.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:43.498Z,1516405363.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:43.512Z,1516405363.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:43.900Z,1516405363.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:43.913Z,1516405363.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:44.300Z,1516405364.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:44.314Z,1516405364.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:44.698Z,1516405364.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:44.711Z,1516405364.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:45.096Z,1516405365.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:45.109Z,1516405365.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:45.500Z,1516405365.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:45.515Z,1516405365.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:45.908Z,1516405365.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:45.922Z,1516405365.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:46.292Z,1516405366.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:46.306Z,1516405366.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:46.698Z,1516405366.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:46.713Z,1516405366.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:47.101Z,1516405367.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:47.115Z,1516405367.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:47.492Z,1516405367.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:47.506Z,1516405367.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:47.904Z,1516405367.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:47.919Z,1516405367.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:48.302Z,1516405368.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:48.316Z,1516405368.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:48.692Z,1516405368.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:48.706Z,1516405368.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:49.102Z,1516405369.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:49.116Z,1516405369.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:49.502Z,1516405369.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:49.516Z,1516405369.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:49.902Z,1516405369.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:49.915Z,1516405369.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:50.297Z,1516405370.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:50.316Z,1516405370.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:50.698Z,1516405370.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:50.712Z,1516405370.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:51.096Z,1516405371.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:51.110Z,1516405371.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:51.502Z,1516405371.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:51.516Z,1516405371.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:51.902Z,1516405371.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:51.916Z,1516405371.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:52.296Z,1516405372.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:52.310Z,1516405372.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:52.702Z,1516405372.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:52.716Z,1516405372.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:53.102Z,1516405373.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:53.116Z,1516405373.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:53.495Z,1516405373.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:53.508Z,1516405373.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:53.878Z,1516405373.878 [NAL9602](INFO): Powering up NAL9602
2018-01-19T23:42:53.907Z,1516405373.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:53.927Z,1516405373.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:54.302Z,1516405374.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:54.316Z,1516405374.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:54.696Z,1516405374.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:54.710Z,1516405374.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:55.102Z,1516405375.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:55.116Z,1516405375.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:55.502Z,1516405375.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:55.516Z,1516405375.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:55.902Z,1516405375.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:55.916Z,1516405375.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:56.302Z,1516405376.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:56.316Z,1516405376.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:56.702Z,1516405376.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:56.716Z,1516405376.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:57.091Z,1516405377.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:57.124Z,1516405377.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:57.503Z,1516405377.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:57.517Z,1516405377.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:57.891Z,1516405377.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:57.916Z,1516405377.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:58.291Z,1516405378.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:58.324Z,1516405378.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:58.703Z,1516405378.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:58.717Z,1516405378.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:59.091Z,1516405379.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:59.122Z,1516405379.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:59.502Z,1516405379.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:59.516Z,1516405379.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:42:59.904Z,1516405379.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:42:59.919Z,1516405379.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:00.291Z,1516405380.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:00.323Z,1516405380.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:00.703Z,1516405380.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:00.717Z,1516405380.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:01.089Z,1516405381.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:01.114Z,1516405381.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:01.508Z,1516405381.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:01.522Z,1516405381.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:01.888Z,1516405381.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:01.928Z,1516405381.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:02.286Z,1516405382.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:02.324Z,1516405382.324 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:02.324Z,1516405382.324 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-01-19T23:43:02.324Z,1516405382.324 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:43:02.326Z,1516405382.326 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:02.326Z,1516405382.326 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-01-19T23:43:02.326Z,1516405382.326 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:43:02.328Z,1516405382.328 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:02.328Z,1516405382.328 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51
2018-01-19T23:43:02.328Z,1516405382.328 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:43:02.340Z,1516405382.340 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:43:02.340Z,1516405382.340 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:43:02.340Z,1516405382.340 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:43:02.692Z,1516405382.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:02.738Z,1516405382.738 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:43:02.738Z,1516405382.738 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-01-19T23:43:02.738Z,1516405382.738 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:43:02.738Z,1516405382.738 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-01-19T23:43:02.739Z,1516405382.739 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:43:02.739Z,1516405382.739 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51
2018-01-19T23:43:03.088Z,1516405383.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:03.119Z,1516405383.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:43:03.119Z,1516405383.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:43:03.119Z,1516405383.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:43:03.120Z,1516405383.120 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:43:03.120Z,1516405383.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:43:03.120Z,1516405383.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:43:03.121Z,1516405383.121 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:43:03.121Z,1516405383.121 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:43:03.121Z,1516405383.121 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:43:03.492Z,1516405383.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:03.523Z,1516405383.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:43:03.524Z,1516405383.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:03.896Z,1516405383.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:03.930Z,1516405383.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:43:03.931Z,1516405383.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:04.288Z,1516405384.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:04.324Z,1516405384.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:43:04.325Z,1516405384.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:04.700Z,1516405384.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:04.738Z,1516405384.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:43:04.739Z,1516405384.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:05.078Z,1516405385.078 [NAL9602](INFO): NAL9602 initialized
2018-01-19T23:43:05.096Z,1516405385.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:05.136Z,1516405385.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:43:05.137Z,1516405385.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:05.496Z,1516405385.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:05.529Z,1516405385.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:43:05.530Z,1516405385.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:05.916Z,1516405385.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:05.931Z,1516405385.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:43:05.932Z,1516405385.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:06.313Z,1516405386.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:06.335Z,1516405386.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:43:06.336Z,1516405386.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:06.716Z,1516405386.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:06.731Z,1516405386.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:43:06.732Z,1516405386.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:07.089Z,1516405387.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:07.103Z,1516405387.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:43:07.103Z,1516405387.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:07.492Z,1516405387.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:07.506Z,1516405387.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:43:07.507Z,1516405387.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:07.899Z,1516405387.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:07.912Z,1516405387.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:43:07.940Z,1516405387.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:08.297Z,1516405388.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:08.311Z,1516405388.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:43:08.312Z,1516405388.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:08.714Z,1516405388.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:08.742Z,1516405388.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:43:08.743Z,1516405388.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:09.109Z,1516405389.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:09.135Z,1516405389.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:43:09.136Z,1516405389.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:09.496Z,1516405389.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:09.510Z,1516405389.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:43:09.511Z,1516405389.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:09.896Z,1516405389.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:09.910Z,1516405389.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:43:09.911Z,1516405389.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:10.305Z,1516405390.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:10.319Z,1516405390.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:43:10.319Z,1516405390.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:10.702Z,1516405390.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:10.716Z,1516405390.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:43:10.717Z,1516405390.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:11.106Z,1516405391.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:11.120Z,1516405391.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:43:11.121Z,1516405391.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:11.499Z,1516405391.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:11.512Z,1516405391.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:43:11.513Z,1516405391.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:11.900Z,1516405391.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:11.914Z,1516405391.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:43:11.915Z,1516405391.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:12.314Z,1516405392.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:12.328Z,1516405392.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:43:12.345Z,1516405392.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:12.705Z,1516405392.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:12.718Z,1516405392.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:43:12.719Z,1516405392.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:13.105Z,1516405393.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:13.119Z,1516405393.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:43:13.120Z,1516405393.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:13.503Z,1516405393.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:13.522Z,1516405393.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:43:13.523Z,1516405393.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:13.900Z,1516405393.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:13.914Z,1516405393.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:43:13.915Z,1516405393.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:14.305Z,1516405394.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:14.319Z,1516405394.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:43:14.320Z,1516405394.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:14.706Z,1516405394.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:14.720Z,1516405394.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:43:14.721Z,1516405394.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:15.106Z,1516405395.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:15.119Z,1516405395.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:43:15.120Z,1516405395.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:15.498Z,1516405395.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:15.512Z,1516405395.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:43:15.513Z,1516405395.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:15.899Z,1516405395.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:15.912Z,1516405395.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:43:15.913Z,1516405395.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:16.304Z,1516405396.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:16.322Z,1516405396.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:43:16.323Z,1516405396.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:16.705Z,1516405396.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:16.719Z,1516405396.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:43:16.720Z,1516405396.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:17.106Z,1516405397.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:17.120Z,1516405397.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:43:17.121Z,1516405397.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:17.502Z,1516405397.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:17.515Z,1516405397.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:43:17.516Z,1516405397.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:17.903Z,1516405397.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:17.917Z,1516405397.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:43:17.918Z,1516405397.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:18.310Z,1516405398.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:18.324Z,1516405398.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:43:18.325Z,1516405398.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:18.706Z,1516405398.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:18.719Z,1516405398.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:43:18.720Z,1516405398.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:19.105Z,1516405399.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:19.119Z,1516405399.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:43:19.120Z,1516405399.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:19.503Z,1516405399.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:19.522Z,1516405399.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:43:19.523Z,1516405399.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:19.903Z,1516405399.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:19.916Z,1516405399.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:43:19.917Z,1516405399.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:23.002Z,1516405403.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:23.023Z,1516405403.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:23.144Z,1516405403.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:23.163Z,1516405403.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:23.522Z,1516405403.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:23.554Z,1516405403.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:23.911Z,1516405403.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:23.926Z,1516405403.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:24.309Z,1516405404.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:24.323Z,1516405404.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:24.710Z,1516405404.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:24.724Z,1516405404.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:25.108Z,1516405405.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:25.123Z,1516405405.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:25.518Z,1516405405.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:25.532Z,1516405405.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:25.926Z,1516405405.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:25.969Z,1516405405.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:26.312Z,1516405406.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:26.327Z,1516405406.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:26.712Z,1516405406.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:26.731Z,1516405406.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:27.108Z,1516405407.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:27.122Z,1516405407.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:27.509Z,1516405407.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:27.523Z,1516405407.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:27.914Z,1516405407.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:27.928Z,1516405407.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:28.310Z,1516405408.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:28.324Z,1516405408.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:28.722Z,1516405408.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:28.736Z,1516405408.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:29.118Z,1516405409.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:29.132Z,1516405409.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:29.525Z,1516405409.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:29.539Z,1516405409.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:29.911Z,1516405409.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:29.926Z,1516405409.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:30.312Z,1516405410.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:30.331Z,1516405410.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:30.712Z,1516405410.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:30.726Z,1516405410.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:31.111Z,1516405411.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:31.126Z,1516405411.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:31.526Z,1516405411.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:31.540Z,1516405411.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:31.918Z,1516405411.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:31.932Z,1516405411.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:32.318Z,1516405412.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:32.332Z,1516405412.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:32.716Z,1516405412.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:32.735Z,1516405412.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:33.115Z,1516405413.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:33.143Z,1516405413.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:33.518Z,1516405413.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:33.541Z,1516405413.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:33.906Z,1516405413.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:33.939Z,1516405413.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:34.308Z,1516405414.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:34.350Z,1516405414.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:34.730Z,1516405414.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:34.752Z,1516405414.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:35.120Z,1516405415.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:35.154Z,1516405415.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:35.546Z,1516405415.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:35.560Z,1516405415.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:35.913Z,1516405415.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:35.927Z,1516405415.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:36.315Z,1516405416.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:36.361Z,1516405416.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:36.719Z,1516405416.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:36.770Z,1516405416.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:37.117Z,1516405417.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:37.132Z,1516405417.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:37.521Z,1516405417.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:37.540Z,1516405417.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:37.921Z,1516405417.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:37.972Z,1516405417.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:38.327Z,1516405418.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:38.372Z,1516405418.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:38.705Z,1516405418.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:38.746Z,1516405418.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:39.108Z,1516405419.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:39.184Z,1516405419.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:39.507Z,1516405419.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:39.547Z,1516405419.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:39.908Z,1516405419.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:39.951Z,1516405419.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:40.334Z,1516405420.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:40.363Z,1516405420.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:40.719Z,1516405420.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:40.743Z,1516405420.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:41.124Z,1516405421.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:41.156Z,1516405421.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:41.528Z,1516405421.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:41.595Z,1516405421.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:41.914Z,1516405421.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:41.952Z,1516405421.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:42.323Z,1516405422.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:42.366Z,1516405422.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:42.752Z,1516405422.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:42.788Z,1516405422.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:43.114Z,1516405423.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:43.146Z,1516405423.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:43.526Z,1516405423.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:43.540Z,1516405423.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:43.929Z,1516405423.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:43.944Z,1516405423.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:44.316Z,1516405424.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:44.344Z,1516405424.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:44.710Z,1516405424.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:44.726Z,1516405424.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:45.110Z,1516405425.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:45.124Z,1516405425.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:45.504Z,1516405425.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:45.546Z,1516405425.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:45.914Z,1516405425.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:45.928Z,1516405425.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:46.315Z,1516405426.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:46.329Z,1516405426.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:46.714Z,1516405426.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:46.728Z,1516405426.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:47.127Z,1516405427.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:47.155Z,1516405427.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:47.520Z,1516405427.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:47.534Z,1516405427.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:47.915Z,1516405427.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:47.929Z,1516405427.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:48.313Z,1516405428.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:48.327Z,1516405428.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:48.711Z,1516405428.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:48.755Z,1516405428.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:49.111Z,1516405429.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:49.120Z,1516405429.120 [PNI_TCM](ERROR): CRC does not match. Expected:0x53138 got:0x17164
2018-01-19T23:43:49.155Z,1516405429.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:49.516Z,1516405429.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:49.530Z,1516405429.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:49.914Z,1516405429.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:49.928Z,1516405429.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:50.309Z,1516405430.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:50.343Z,1516405430.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:50.705Z,1516405430.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:50.723Z,1516405430.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:51.110Z,1516405431.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:51.124Z,1516405431.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:51.499Z,1516405431.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:51.514Z,1516405431.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:51.908Z,1516405431.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:51.939Z,1516405431.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:52.306Z,1516405432.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:52.324Z,1516405432.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:52.717Z,1516405432.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:52.747Z,1516405432.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:53.119Z,1516405433.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:53.143Z,1516405433.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:53.522Z,1516405433.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:53.559Z,1516405433.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:53.917Z,1516405433.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:53.926Z,1516405433.926 [PNI_TCM](ERROR): CRC does not match. Expected:0x41099 got:0x49482
2018-01-19T23:43:53.966Z,1516405433.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:54.318Z,1516405434.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:54.332Z,1516405434.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:54.715Z,1516405434.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:54.729Z,1516405434.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:55.109Z,1516405435.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:55.143Z,1516405435.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:55.527Z,1516405435.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:55.547Z,1516405435.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:55.926Z,1516405435.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:55.940Z,1516405435.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:56.326Z,1516405436.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:56.340Z,1516405436.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:56.715Z,1516405436.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:56.747Z,1516405436.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:57.112Z,1516405437.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:57.130Z,1516405437.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:57.509Z,1516405437.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:57.538Z,1516405437.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:57.918Z,1516405437.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:57.932Z,1516405437.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:58.303Z,1516405438.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:58.347Z,1516405438.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:58.719Z,1516405438.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:58.737Z,1516405438.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:59.127Z,1516405439.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:59.151Z,1516405439.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:59.528Z,1516405439.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:59.542Z,1516405439.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:43:59.916Z,1516405439.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:43:59.948Z,1516405439.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:00.315Z,1516405440.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:00.337Z,1516405440.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:00.704Z,1516405440.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:00.733Z,1516405440.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:01.101Z,1516405441.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:01.128Z,1516405441.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:01.526Z,1516405441.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:01.571Z,1516405441.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:01.925Z,1516405441.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:01.943Z,1516405441.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:02.324Z,1516405442.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:02.339Z,1516405442.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:02.703Z,1516405442.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:02.738Z,1516405442.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:03.107Z,1516405443.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:03.152Z,1516405443.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:03.497Z,1516405443.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:03.511Z,1516405443.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:03.908Z,1516405443.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:03.942Z,1516405443.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:04.303Z,1516405444.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:04.340Z,1516405444.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:04.714Z,1516405444.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:04.740Z,1516405444.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:05.126Z,1516405445.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:05.147Z,1516405445.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:05.514Z,1516405445.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:05.551Z,1516405445.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:05.916Z,1516405445.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:05.943Z,1516405445.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:06.303Z,1516405446.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:06.339Z,1516405446.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:06.708Z,1516405446.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:06.743Z,1516405446.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:07.097Z,1516405447.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:07.111Z,1516405447.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:07.510Z,1516405447.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:07.555Z,1516405447.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:07.931Z,1516405447.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:07.945Z,1516405447.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:08.314Z,1516405448.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:08.343Z,1516405448.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:08.703Z,1516405448.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:08.739Z,1516405448.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:09.111Z,1516405449.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:09.146Z,1516405449.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:09.504Z,1516405449.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:09.518Z,1516405449.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:09.912Z,1516405449.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:09.926Z,1516405449.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:10.311Z,1516405450.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:10.332Z,1516405450.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:10.710Z,1516405450.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:10.727Z,1516405450.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:11.126Z,1516405451.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:11.162Z,1516405451.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:11.518Z,1516405451.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:11.532Z,1516405451.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:11.909Z,1516405451.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:11.923Z,1516405451.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:12.311Z,1516405452.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:12.334Z,1516405452.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:12.714Z,1516405452.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:12.728Z,1516405452.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:13.108Z,1516405453.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:13.122Z,1516405453.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:13.516Z,1516405453.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:13.535Z,1516405453.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:13.922Z,1516405453.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:13.940Z,1516405453.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:14.318Z,1516405454.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:14.332Z,1516405454.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:14.711Z,1516405454.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:14.725Z,1516405454.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:15.111Z,1516405455.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:15.125Z,1516405455.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:15.515Z,1516405455.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:15.532Z,1516405455.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:15.915Z,1516405455.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:15.935Z,1516405455.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:16.315Z,1516405456.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:16.329Z,1516405456.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:16.718Z,1516405456.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:16.732Z,1516405456.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:17.122Z,1516405457.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:17.140Z,1516405457.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:17.518Z,1516405457.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:17.532Z,1516405457.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:17.913Z,1516405457.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:17.928Z,1516405457.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:18.312Z,1516405458.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:18.331Z,1516405458.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:18.716Z,1516405458.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:18.731Z,1516405458.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:19.114Z,1516405459.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:19.128Z,1516405459.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:19.518Z,1516405459.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:19.532Z,1516405459.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:19.920Z,1516405459.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:19.934Z,1516405459.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:23.011Z,1516405463.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:23.025Z,1516405463.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:23.122Z,1516405463.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:23.169Z,1516405463.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:23.475Z,1516405463.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:23.511Z,1516405463.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:23.880Z,1516405463.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:23.894Z,1516405463.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:24.272Z,1516405464.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:24.286Z,1516405464.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:24.690Z,1516405464.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:24.711Z,1516405464.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:25.090Z,1516405465.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:25.115Z,1516405465.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:25.478Z,1516405465.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:25.492Z,1516405465.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:25.879Z,1516405465.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:25.894Z,1516405465.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:26.279Z,1516405466.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:26.293Z,1516405466.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:26.680Z,1516405466.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:26.694Z,1516405466.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:27.076Z,1516405467.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:27.095Z,1516405467.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:27.478Z,1516405467.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:27.492Z,1516405467.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:27.882Z,1516405467.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:27.896Z,1516405467.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:28.286Z,1516405468.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:28.300Z,1516405468.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:28.675Z,1516405468.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:28.694Z,1516405468.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:29.072Z,1516405469.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:29.086Z,1516405469.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:29.476Z,1516405469.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:29.498Z,1516405469.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:29.881Z,1516405469.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:29.895Z,1516405469.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:30.270Z,1516405470.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:30.290Z,1516405470.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:30.694Z,1516405470.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:30.724Z,1516405470.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:31.082Z,1516405471.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:31.102Z,1516405471.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:31.480Z,1516405471.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:31.494Z,1516405471.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:31.880Z,1516405471.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:31.899Z,1516405471.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:32.280Z,1516405472.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:32.294Z,1516405472.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:32.678Z,1516405472.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:32.692Z,1516405472.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:33.079Z,1516405473.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:33.099Z,1516405473.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:33.494Z,1516405473.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:33.525Z,1516405473.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:33.881Z,1516405473.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:33.895Z,1516405473.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:34.282Z,1516405474.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:34.296Z,1516405474.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:34.680Z,1516405474.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:34.694Z,1516405474.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:35.077Z,1516405475.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:35.091Z,1516405475.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:35.477Z,1516405475.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:35.499Z,1516405475.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:35.885Z,1516405475.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:35.898Z,1516405475.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:36.277Z,1516405476.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:36.291Z,1516405476.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:36.689Z,1516405476.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:36.703Z,1516405476.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:37.089Z,1516405477.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:37.110Z,1516405477.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:37.486Z,1516405477.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:37.500Z,1516405477.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:37.879Z,1516405477.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:37.899Z,1516405477.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:38.276Z,1516405478.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:38.290Z,1516405478.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:38.684Z,1516405478.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:38.698Z,1516405478.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:39.073Z,1516405479.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:39.104Z,1516405479.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:39.490Z,1516405479.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:39.510Z,1516405479.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:39.888Z,1516405479.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:39.907Z,1516405479.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:40.289Z,1516405480.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:40.310Z,1516405480.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:40.683Z,1516405480.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:40.702Z,1516405480.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:41.073Z,1516405481.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:41.091Z,1516405481.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:41.473Z,1516405481.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:41.499Z,1516405481.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:41.885Z,1516405481.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:41.899Z,1516405481.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:42.265Z,1516405482.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:42.291Z,1516405482.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:42.694Z,1516405482.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:42.708Z,1516405482.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:43.095Z,1516405483.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:43.114Z,1516405483.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:43.482Z,1516405483.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:43.503Z,1516405483.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:43.871Z,1516405483.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:43.896Z,1516405483.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:44.272Z,1516405484.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:44.299Z,1516405484.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:44.676Z,1516405484.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:44.701Z,1516405484.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:45.071Z,1516405485.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:45.096Z,1516405485.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:45.491Z,1516405485.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:45.505Z,1516405485.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:45.898Z,1516405485.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:45.912Z,1516405485.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:46.294Z,1516405486.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:46.308Z,1516405486.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:46.673Z,1516405486.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:46.699Z,1516405486.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:47.069Z,1516405487.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:47.091Z,1516405487.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:47.482Z,1516405487.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:47.519Z,1516405487.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:47.887Z,1516405487.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:47.911Z,1516405487.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:48.282Z,1516405488.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:48.313Z,1516405488.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:48.680Z,1516405488.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:48.708Z,1516405488.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:49.076Z,1516405489.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:49.110Z,1516405489.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:49.494Z,1516405489.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:49.508Z,1516405489.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:49.904Z,1516405489.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:49.918Z,1516405489.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:50.297Z,1516405490.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:50.311Z,1516405490.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:50.677Z,1516405490.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:50.700Z,1516405490.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:51.079Z,1516405491.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:51.110Z,1516405491.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:51.490Z,1516405491.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:51.515Z,1516405491.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:51.894Z,1516405491.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:51.923Z,1516405491.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:52.290Z,1516405492.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:52.312Z,1516405492.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:52.679Z,1516405492.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:52.693Z,1516405492.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:53.083Z,1516405493.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:53.119Z,1516405493.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:53.490Z,1516405493.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:53.504Z,1516405493.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:53.894Z,1516405493.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:53.908Z,1516405493.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:54.283Z,1516405494.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:54.311Z,1516405494.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:54.681Z,1516405494.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:54.709Z,1516405494.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:55.080Z,1516405495.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:55.110Z,1516405495.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:55.494Z,1516405495.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:55.513Z,1516405495.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:55.894Z,1516405495.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:55.914Z,1516405495.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:56.296Z,1516405496.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:56.310Z,1516405496.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:56.678Z,1516405496.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:56.704Z,1516405496.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:57.074Z,1516405497.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:57.088Z,1516405497.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:57.490Z,1516405497.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:57.517Z,1516405497.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:57.894Z,1516405497.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:57.919Z,1516405497.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:58.291Z,1516405498.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:58.315Z,1516405498.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:58.677Z,1516405498.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:58.692Z,1516405498.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:59.080Z,1516405499.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:59.095Z,1516405499.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:59.495Z,1516405499.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:59.524Z,1516405499.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:44:59.895Z,1516405499.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:44:59.924Z,1516405499.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:00.278Z,1516405500.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:00.293Z,1516405500.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:00.676Z,1516405500.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:00.699Z,1516405500.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:01.080Z,1516405501.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:01.095Z,1516405501.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:01.478Z,1516405501.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:01.492Z,1516405501.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:01.898Z,1516405501.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:01.931Z,1516405501.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:02.294Z,1516405502.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:02.328Z,1516405502.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:02.679Z,1516405502.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:02.699Z,1516405502.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:03.076Z,1516405503.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:03.091Z,1516405503.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:03.478Z,1516405503.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:03.492Z,1516405503.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:03.894Z,1516405503.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:03.924Z,1516405503.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:04.286Z,1516405504.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:04.300Z,1516405504.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:04.681Z,1516405504.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:04.695Z,1516405504.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:05.074Z,1516405505.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:05.095Z,1516405505.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:05.494Z,1516405505.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:05.524Z,1516405505.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:05.882Z,1516405505.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:05.896Z,1516405505.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:06.294Z,1516405506.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:06.308Z,1516405506.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:06.683Z,1516405506.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:06.703Z,1516405506.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:07.084Z,1516405507.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:07.097Z,1516405507.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:07.486Z,1516405507.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:07.501Z,1516405507.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:07.890Z,1516405507.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:07.904Z,1516405507.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:08.286Z,1516405508.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:08.300Z,1516405508.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:08.683Z,1516405508.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:08.703Z,1516405508.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:09.079Z,1516405509.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:09.093Z,1516405509.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:09.484Z,1516405509.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:09.499Z,1516405509.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:09.884Z,1516405509.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:09.903Z,1516405509.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:10.284Z,1516405510.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:10.303Z,1516405510.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:10.684Z,1516405510.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:10.697Z,1516405510.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:11.083Z,1516405511.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:11.103Z,1516405511.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:11.486Z,1516405511.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:11.500Z,1516405511.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:11.890Z,1516405511.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:11.904Z,1516405511.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:12.286Z,1516405512.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:12.300Z,1516405512.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:12.683Z,1516405512.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:12.703Z,1516405512.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:13.084Z,1516405513.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:13.097Z,1516405513.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:13.486Z,1516405513.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:13.501Z,1516405513.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:13.890Z,1516405513.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:13.904Z,1516405513.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:14.286Z,1516405514.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:14.300Z,1516405514.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:14.683Z,1516405514.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:14.703Z,1516405514.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:15.078Z,1516405515.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:15.092Z,1516405515.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:15.485Z,1516405515.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:15.506Z,1516405515.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:15.884Z,1516405515.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:15.903Z,1516405515.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:16.284Z,1516405516.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:16.303Z,1516405516.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:16.684Z,1516405516.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:16.697Z,1516405516.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:17.083Z,1516405517.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:17.102Z,1516405517.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:17.484Z,1516405517.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:17.503Z,1516405517.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:17.890Z,1516405517.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:17.904Z,1516405517.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:18.285Z,1516405518.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:18.299Z,1516405518.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:18.678Z,1516405518.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:18.692Z,1516405518.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:19.076Z,1516405519.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:19.094Z,1516405519.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:19.483Z,1516405519.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:19.503Z,1516405519.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:19.886Z,1516405519.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:19.901Z,1516405519.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:20.289Z,1516405520.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:20.303Z,1516405520.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:23.384Z,1516405523.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:23.398Z,1516405523.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:23.499Z,1516405523.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:23.535Z,1516405523.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:23.860Z,1516405523.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:23.886Z,1516405523.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:24.256Z,1516405524.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:24.287Z,1516405524.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:24.643Z,1516405524.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:24.679Z,1516405524.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:25.048Z,1516405525.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:25.062Z,1516405525.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:25.451Z,1516405525.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:25.491Z,1516405525.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:25.866Z,1516405525.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:25.889Z,1516405525.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:26.270Z,1516405526.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:26.299Z,1516405526.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:26.666Z,1516405526.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:26.691Z,1516405526.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:27.055Z,1516405527.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:27.091Z,1516405527.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:27.455Z,1516405527.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:27.475Z,1516405527.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:27.858Z,1516405527.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:27.872Z,1516405527.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:28.253Z,1516405528.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:28.267Z,1516405528.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:28.666Z,1516405528.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:28.701Z,1516405528.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:29.066Z,1516405529.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:29.080Z,1516405529.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:29.470Z,1516405529.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:29.502Z,1516405529.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:29.853Z,1516405529.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:29.875Z,1516405529.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:30.254Z,1516405530.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:30.268Z,1516405530.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:30.648Z,1516405530.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:30.670Z,1516405530.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:31.051Z,1516405531.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:31.071Z,1516405531.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:31.454Z,1516405531.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:31.468Z,1516405531.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:31.862Z,1516405531.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:31.877Z,1516405531.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:32.269Z,1516405532.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:32.283Z,1516405532.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:32.663Z,1516405532.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:32.679Z,1516405532.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:33.061Z,1516405533.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:33.075Z,1516405533.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:33.460Z,1516405533.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:33.475Z,1516405533.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:33.854Z,1516405533.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:33.869Z,1516405533.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:34.246Z,1516405534.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:34.274Z,1516405534.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:34.667Z,1516405534.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:34.687Z,1516405534.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:35.066Z,1516405535.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:35.081Z,1516405535.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:35.462Z,1516405535.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:35.480Z,1516405535.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:35.860Z,1516405535.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:35.876Z,1516405535.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:36.251Z,1516405536.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:36.276Z,1516405536.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:36.659Z,1516405536.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:36.674Z,1516405536.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:37.050Z,1516405537.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:37.080Z,1516405537.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:37.460Z,1516405537.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:37.474Z,1516405537.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:37.862Z,1516405537.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:37.879Z,1516405537.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:38.279Z,1516405538.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:38.314Z,1516405538.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:38.669Z,1516405538.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:38.684Z,1516405538.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:39.059Z,1516405539.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:39.079Z,1516405539.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:39.450Z,1516405539.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:39.472Z,1516405539.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:39.844Z,1516405539.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:39.879Z,1516405539.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:40.259Z,1516405540.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:40.279Z,1516405540.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:40.666Z,1516405540.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:40.680Z,1516405540.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:41.060Z,1516405541.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:41.077Z,1516405541.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:41.450Z,1516405541.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:41.475Z,1516405541.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:41.844Z,1516405541.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:41.879Z,1516405541.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:42.238Z,1516405542.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:42.282Z,1516405542.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:42.641Z,1516405542.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:42.655Z,1516405542.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:43.064Z,1516405543.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:43.087Z,1516405543.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:43.443Z,1516405543.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:43.462Z,1516405543.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:43.862Z,1516405543.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:43.887Z,1516405543.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:44.262Z,1516405544.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:44.295Z,1516405544.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:44.653Z,1516405544.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:44.687Z,1516405544.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:45.051Z,1516405545.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:45.086Z,1516405545.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:45.447Z,1516405545.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:45.483Z,1516405545.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:45.852Z,1516405545.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:45.866Z,1516405545.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:46.255Z,1516405546.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:46.291Z,1516405546.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:46.666Z,1516405546.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:46.697Z,1516405546.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:47.062Z,1516405547.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:47.076Z,1516405547.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:47.470Z,1516405547.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:47.491Z,1516405547.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:47.854Z,1516405547.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:47.868Z,1516405547.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:48.251Z,1516405548.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:48.264Z,1516405548.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:48.650Z,1516405548.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:48.664Z,1516405548.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:49.057Z,1516405549.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:49.071Z,1516405549.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:49.452Z,1516405549.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:49.466Z,1516405549.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:49.866Z,1516405549.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:49.896Z,1516405549.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:50.270Z,1516405550.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:50.299Z,1516405550.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:50.654Z,1516405550.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:50.675Z,1516405550.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:51.052Z,1516405551.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:51.066Z,1516405551.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:51.456Z,1516405551.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:51.475Z,1516405551.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:51.853Z,1516405551.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:51.867Z,1516405551.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:52.256Z,1516405552.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:52.275Z,1516405552.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:52.666Z,1516405552.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:52.680Z,1516405552.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:53.070Z,1516405553.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:53.084Z,1516405553.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:53.458Z,1516405553.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:53.472Z,1516405553.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:53.856Z,1516405553.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:53.875Z,1516405553.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:54.256Z,1516405554.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:54.269Z,1516405554.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:54.659Z,1516405554.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:54.674Z,1516405554.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:55.059Z,1516405555.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:55.079Z,1516405555.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:55.460Z,1516405555.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:55.474Z,1516405555.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:55.862Z,1516405555.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:55.877Z,1516405555.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:56.260Z,1516405556.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:56.279Z,1516405556.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:56.662Z,1516405556.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:56.679Z,1516405556.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:57.058Z,1516405557.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:57.072Z,1516405557.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:57.451Z,1516405557.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:57.465Z,1516405557.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:57.852Z,1516405557.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:57.866Z,1516405557.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:58.259Z,1516405558.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:58.273Z,1516405558.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:58.660Z,1516405558.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:58.679Z,1516405558.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:59.066Z,1516405559.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:59.080Z,1516405559.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:59.462Z,1516405559.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:59.477Z,1516405559.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:45:59.855Z,1516405559.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:45:59.869Z,1516405559.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:00.252Z,1516405560.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:00.270Z,1516405560.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:00.659Z,1516405560.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:00.673Z,1516405560.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:01.054Z,1516405561.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:01.072Z,1516405561.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:01.459Z,1516405561.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:01.473Z,1516405561.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:01.866Z,1516405561.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:01.880Z,1516405561.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:02.263Z,1516405562.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:02.279Z,1516405562.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:02.662Z,1516405562.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:02.679Z,1516405562.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:03.054Z,1516405563.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:03.068Z,1516405563.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:03.455Z,1516405563.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:03.469Z,1516405563.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:03.469Z,1516405563.469 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-01-19T23:46:03.469Z,1516405563.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:46:03.471Z,1516405563.471 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:03.471Z,1516405563.471 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-01-19T23:46:03.471Z,1516405563.471 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:46:03.473Z,1516405563.473 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:03.473Z,1516405563.473 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52
2018-01-19T23:46:03.473Z,1516405563.473 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:46:03.485Z,1516405563.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:46:03.485Z,1516405563.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:46:03.486Z,1516405563.486 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:46:03.856Z,1516405563.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:03.880Z,1516405563.880 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:46:03.880Z,1516405563.880 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-01-19T23:46:03.881Z,1516405563.881 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:46:03.881Z,1516405563.881 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-01-19T23:46:03.881Z,1516405563.881 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:46:03.881Z,1516405563.881 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52
2018-01-19T23:46:04.250Z,1516405564.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:04.271Z,1516405564.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:46:04.272Z,1516405564.272 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:46:04.272Z,1516405564.272 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:46:04.272Z,1516405564.272 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:46:04.273Z,1516405564.273 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:46:04.273Z,1516405564.273 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:46:04.274Z,1516405564.274 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:46:04.274Z,1516405564.274 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:46:04.274Z,1516405564.274 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:46:04.670Z,1516405564.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:04.684Z,1516405564.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:46:04.685Z,1516405564.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:05.066Z,1516405565.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:05.080Z,1516405565.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:46:05.081Z,1516405565.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:05.469Z,1516405565.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:05.490Z,1516405565.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:46:05.491Z,1516405565.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:05.859Z,1516405565.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:05.873Z,1516405565.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:46:05.874Z,1516405565.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:06.243Z,1516405566.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:06.277Z,1516405566.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:46:06.278Z,1516405566.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:06.659Z,1516405566.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:06.672Z,1516405566.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:46:06.674Z,1516405566.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:07.044Z,1516405567.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:07.074Z,1516405567.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:46:07.075Z,1516405567.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:07.457Z,1516405567.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:07.470Z,1516405567.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:46:07.471Z,1516405567.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:07.867Z,1516405567.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:07.880Z,1516405567.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:46:07.882Z,1516405567.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:08.269Z,1516405568.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:08.283Z,1516405568.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:46:08.284Z,1516405568.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:08.670Z,1516405568.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:08.684Z,1516405568.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:46:08.685Z,1516405568.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:09.057Z,1516405569.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:09.071Z,1516405569.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:46:09.072Z,1516405569.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:09.451Z,1516405569.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:09.473Z,1516405569.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:46:09.474Z,1516405569.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:09.858Z,1516405569.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:09.872Z,1516405569.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:46:09.872Z,1516405569.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:10.244Z,1516405570.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:10.280Z,1516405570.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:46:10.281Z,1516405570.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:10.667Z,1516405570.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:10.681Z,1516405570.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:46:10.682Z,1516405570.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:11.067Z,1516405571.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:11.081Z,1516405571.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:46:11.082Z,1516405571.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:11.454Z,1516405571.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:11.488Z,1516405571.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:46:11.489Z,1516405571.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:11.857Z,1516405571.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:11.872Z,1516405571.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:46:11.873Z,1516405571.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:12.242Z,1516405572.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:12.279Z,1516405572.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:46:12.279Z,1516405572.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:12.649Z,1516405572.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:12.675Z,1516405572.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:46:12.676Z,1516405572.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:13.048Z,1516405573.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:13.074Z,1516405573.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:46:13.075Z,1516405573.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:13.464Z,1516405573.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:13.479Z,1516405573.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:46:13.480Z,1516405573.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:13.871Z,1516405573.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:13.886Z,1516405573.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:46:13.887Z,1516405573.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:14.270Z,1516405574.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:14.291Z,1516405574.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:46:14.292Z,1516405574.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:14.671Z,1516405574.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:14.685Z,1516405574.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:46:14.686Z,1516405574.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:15.043Z,1516405575.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:15.068Z,1516405575.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:46:15.069Z,1516405575.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:15.443Z,1516405575.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:15.482Z,1516405575.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:46:15.483Z,1516405575.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:15.840Z,1516405575.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:15.878Z,1516405575.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:46:15.879Z,1516405575.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:16.239Z,1516405576.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:16.275Z,1516405576.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:46:16.275Z,1516405576.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:16.666Z,1516405576.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:16.680Z,1516405576.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:46:16.681Z,1516405576.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:17.067Z,1516405577.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:17.081Z,1516405577.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:46:17.081Z,1516405577.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:17.462Z,1516405577.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:17.482Z,1516405577.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:46:17.483Z,1516405577.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:17.843Z,1516405577.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:17.874Z,1516405577.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:46:17.875Z,1516405577.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:18.243Z,1516405578.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:18.287Z,1516405578.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:46:18.288Z,1516405578.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:18.641Z,1516405578.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:18.655Z,1516405578.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:46:18.656Z,1516405578.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:19.052Z,1516405579.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:19.090Z,1516405579.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:46:19.091Z,1516405579.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:19.447Z,1516405579.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:19.491Z,1516405579.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:46:19.492Z,1516405579.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:19.862Z,1516405579.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:19.887Z,1516405579.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:46:19.888Z,1516405579.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:20.262Z,1516405580.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:20.287Z,1516405580.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:46:20.288Z,1516405580.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:20.658Z,1516405580.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:20.690Z,1516405580.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:46:20.691Z,1516405580.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:23.755Z,1516405583.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:23.784Z,1516405583.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:23.864Z,1516405583.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:23.907Z,1516405583.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:24.254Z,1516405584.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:24.284Z,1516405584.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:24.650Z,1516405584.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:24.664Z,1516405584.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:25.054Z,1516405585.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:25.082Z,1516405585.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:25.437Z,1516405585.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:25.455Z,1516405585.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:25.841Z,1516405585.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:25.854Z,1516405585.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:26.237Z,1516405586.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:26.251Z,1516405586.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:26.654Z,1516405586.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:26.684Z,1516405586.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:27.054Z,1516405587.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:27.086Z,1516405587.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:27.454Z,1516405587.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:27.484Z,1516405587.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:27.840Z,1516405587.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:27.859Z,1516405587.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:28.240Z,1516405588.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:28.254Z,1516405588.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:28.640Z,1516405588.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:28.655Z,1516405588.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:29.041Z,1516405589.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:29.055Z,1516405589.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:29.440Z,1516405589.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:29.454Z,1516405589.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:29.842Z,1516405589.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:29.856Z,1516405589.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:30.254Z,1516405590.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:30.268Z,1516405590.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:30.646Z,1516405590.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:30.666Z,1516405590.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:31.043Z,1516405591.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:31.057Z,1516405591.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:31.443Z,1516405591.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:31.457Z,1516405591.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:31.844Z,1516405591.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:31.858Z,1516405591.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:32.243Z,1516405592.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:32.260Z,1516405592.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:32.646Z,1516405592.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:32.660Z,1516405592.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:33.050Z,1516405593.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:33.063Z,1516405593.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:33.446Z,1516405593.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:33.461Z,1516405593.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:33.843Z,1516405593.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:33.857Z,1516405593.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:34.243Z,1516405594.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:34.257Z,1516405594.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:34.646Z,1516405594.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:34.661Z,1516405594.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:35.050Z,1516405595.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:35.064Z,1516405595.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:35.446Z,1516405595.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:35.466Z,1516405595.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:35.842Z,1516405595.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:35.856Z,1516405595.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:36.239Z,1516405596.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:36.253Z,1516405596.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:36.645Z,1516405596.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:36.666Z,1516405596.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:37.046Z,1516405597.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:37.060Z,1516405597.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:37.446Z,1516405597.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:37.460Z,1516405597.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:37.843Z,1516405597.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:37.857Z,1516405597.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:38.243Z,1516405598.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:38.257Z,1516405598.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:38.646Z,1516405598.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:38.660Z,1516405598.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:39.045Z,1516405599.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:39.059Z,1516405599.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:39.446Z,1516405599.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:39.460Z,1516405599.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:39.838Z,1516405599.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:39.856Z,1516405599.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:40.240Z,1516405600.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:40.254Z,1516405600.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:40.646Z,1516405600.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:40.660Z,1516405600.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:41.048Z,1516405601.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:41.067Z,1516405601.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:41.446Z,1516405601.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:41.466Z,1516405601.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:41.844Z,1516405601.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:41.858Z,1516405601.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:42.239Z,1516405602.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:42.253Z,1516405602.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:42.645Z,1516405602.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:42.659Z,1516405602.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:43.046Z,1516405603.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:43.060Z,1516405603.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:43.445Z,1516405603.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:43.459Z,1516405603.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:43.842Z,1516405603.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:43.855Z,1516405603.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:44.244Z,1516405604.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:44.258Z,1516405604.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:44.646Z,1516405604.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:44.660Z,1516405604.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:45.050Z,1516405605.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:45.063Z,1516405605.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:45.446Z,1516405605.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:45.460Z,1516405605.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:45.843Z,1516405605.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:45.863Z,1516405605.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:46.242Z,1516405606.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:46.255Z,1516405606.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:46.646Z,1516405606.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:46.660Z,1516405606.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:47.046Z,1516405607.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:47.060Z,1516405607.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:47.447Z,1516405607.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:47.460Z,1516405607.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:47.845Z,1516405607.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:47.859Z,1516405607.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:48.244Z,1516405608.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:48.258Z,1516405608.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:48.647Z,1516405608.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:48.661Z,1516405608.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:49.052Z,1516405609.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:49.066Z,1516405609.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:49.447Z,1516405609.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:49.462Z,1516405609.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:49.841Z,1516405609.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:49.856Z,1516405609.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:50.243Z,1516405610.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:50.259Z,1516405610.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:50.646Z,1516405610.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:50.662Z,1516405610.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:51.050Z,1516405611.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:51.064Z,1516405611.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:51.445Z,1516405611.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:51.459Z,1516405611.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:51.841Z,1516405611.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:51.855Z,1516405611.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:52.243Z,1516405612.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:52.258Z,1516405612.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:52.643Z,1516405612.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:52.671Z,1516405612.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:53.050Z,1516405613.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:53.064Z,1516405613.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:53.449Z,1516405613.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:53.463Z,1516405613.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:53.844Z,1516405613.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:53.859Z,1516405613.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:54.242Z,1516405614.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:54.256Z,1516405614.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:54.650Z,1516405614.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:54.670Z,1516405614.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:55.051Z,1516405615.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:55.065Z,1516405615.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:55.448Z,1516405615.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:55.463Z,1516405615.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:55.844Z,1516405615.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:55.859Z,1516405615.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:56.243Z,1516405616.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:56.263Z,1516405616.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:56.648Z,1516405616.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:56.667Z,1516405616.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:57.050Z,1516405617.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:57.063Z,1516405617.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:57.445Z,1516405617.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:57.459Z,1516405617.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:57.841Z,1516405617.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:57.855Z,1516405617.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:58.240Z,1516405618.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:58.258Z,1516405618.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:58.649Z,1516405618.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:58.663Z,1516405618.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:59.050Z,1516405619.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:59.064Z,1516405619.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:59.450Z,1516405619.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:59.470Z,1516405619.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:46:59.841Z,1516405619.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:46:59.855Z,1516405619.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:00.246Z,1516405620.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:00.260Z,1516405620.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:00.644Z,1516405620.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:00.657Z,1516405620.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:01.050Z,1516405621.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:01.064Z,1516405621.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:01.450Z,1516405621.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:01.464Z,1516405621.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:01.850Z,1516405621.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:01.863Z,1516405621.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:02.243Z,1516405622.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:02.267Z,1516405622.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:02.645Z,1516405622.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:02.660Z,1516405622.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:03.045Z,1516405623.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:03.058Z,1516405623.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:03.437Z,1516405623.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:03.451Z,1516405623.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:03.844Z,1516405623.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:03.867Z,1516405623.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:04.250Z,1516405624.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:04.270Z,1516405624.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:04.642Z,1516405624.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:04.669Z,1516405624.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:05.043Z,1516405625.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:05.063Z,1516405625.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:05.444Z,1516405625.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:05.458Z,1516405625.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:05.845Z,1516405625.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:05.867Z,1516405625.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:06.245Z,1516405626.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:06.267Z,1516405626.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:06.644Z,1516405626.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:06.657Z,1516405626.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:07.054Z,1516405627.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:07.068Z,1516405627.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:07.456Z,1516405627.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:07.475Z,1516405627.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:07.857Z,1516405627.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:07.871Z,1516405627.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:08.243Z,1516405628.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:08.257Z,1516405628.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:08.647Z,1516405628.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:08.661Z,1516405628.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:09.029Z,1516405629.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:09.065Z,1516405629.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:09.427Z,1516405629.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:09.454Z,1516405629.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:09.854Z,1516405629.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:09.868Z,1516405629.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:10.254Z,1516405630.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:10.268Z,1516405630.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:10.648Z,1516405630.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:10.669Z,1516405630.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:11.046Z,1516405631.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:11.060Z,1516405631.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:11.430Z,1516405631.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:11.463Z,1516405631.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:11.836Z,1516405631.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:11.861Z,1516405631.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:12.233Z,1516405632.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:12.261Z,1516405632.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:12.630Z,1516405632.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:12.662Z,1516405632.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:13.058Z,1516405633.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:13.072Z,1516405633.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:13.458Z,1516405633.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:13.472Z,1516405633.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:13.858Z,1516405633.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:13.871Z,1516405633.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:14.247Z,1516405634.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:14.267Z,1516405634.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:14.647Z,1516405634.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:14.661Z,1516405634.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:15.033Z,1516405635.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:15.066Z,1516405635.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:15.425Z,1516405635.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:15.464Z,1516405635.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:15.852Z,1516405635.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:15.866Z,1516405635.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:16.251Z,1516405636.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:16.264Z,1516405636.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:16.642Z,1516405636.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:16.663Z,1516405636.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:17.031Z,1516405637.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:17.066Z,1516405637.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:17.448Z,1516405637.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:17.462Z,1516405637.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:17.831Z,1516405637.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:17.856Z,1516405637.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:18.233Z,1516405638.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:18.266Z,1516405638.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:18.635Z,1516405638.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:18.666Z,1516405638.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:19.057Z,1516405639.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:19.071Z,1516405639.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:19.457Z,1516405639.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:19.471Z,1516405639.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:19.847Z,1516405639.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:19.861Z,1516405639.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:19.863Z,1516405639.863 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T23:47:19.864Z,1516405639.864 [Default:CheckIn:C.Wait] Stopped
2018-01-19T23:47:19.864Z,1516405639.864 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T23:47:19.864Z,1516405639.864 [Default:CheckIn:D] Running Loop=1
2018-01-19T23:47:20.227Z,1516405640.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:20.261Z,1516405640.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:20.264Z,1516405640.264 [Default:CheckIn:D] Stopped
2018-01-19T23:47:20.264Z,1516405640.264 [Default:CheckIn:E] Running Loop=1
2018-01-19T23:47:20.631Z,1516405640.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:20.663Z,1516405640.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:20.671Z,1516405640.671 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 154.537305 min 
2018-01-19T23:47:20.671Z,1516405640.671 [Default:CheckIn:E] Stopped
2018-01-19T23:47:20.671Z,1516405640.671 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T23:47:20.671Z,1516405640.671 [Default:CheckIn] Stopped
2018-01-19T23:47:20.671Z,1516405640.671 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T23:47:20.671Z,1516405640.671 [Default:CheckIn](INFO): Running loop #16
2018-01-19T23:47:20.672Z,1516405640.672 [Default:CheckIn] Running Loop=16
2018-01-19T23:47:20.672Z,1516405640.672 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T23:47:20.672Z,1516405640.672 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T23:47:21.031Z,1516405641.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:21.063Z,1516405641.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:24.125Z,1516405644.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:24.140Z,1516405644.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:24.267Z,1516405644.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:24.287Z,1516405644.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:24.643Z,1516405644.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:24.667Z,1516405644.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:25.039Z,1516405645.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:25.087Z,1516405645.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:25.428Z,1516405645.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:25.467Z,1516405645.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:25.828Z,1516405645.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:25.868Z,1516405645.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:26.221Z,1516405646.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:26.240Z,1516405646.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:26.624Z,1516405646.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:26.639Z,1516405646.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:27.042Z,1516405647.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:27.070Z,1516405647.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:27.426Z,1516405647.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:27.465Z,1516405647.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:27.835Z,1516405647.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:27.850Z,1516405647.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:28.228Z,1516405648.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:28.255Z,1516405648.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:28.616Z,1516405648.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:28.642Z,1516405648.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:29.031Z,1516405649.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:29.055Z,1516405649.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:29.433Z,1516405649.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:29.448Z,1516405649.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:29.833Z,1516405649.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:29.876Z,1516405649.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:30.234Z,1516405650.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:30.249Z,1516405650.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:30.634Z,1516405650.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:30.652Z,1516405650.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:31.034Z,1516405651.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:31.050Z,1516405651.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:31.427Z,1516405651.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:31.459Z,1516405651.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:31.832Z,1516405651.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:31.847Z,1516405651.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:32.224Z,1516405652.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:32.250Z,1516405652.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:32.631Z,1516405652.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:32.649Z,1516405652.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:33.039Z,1516405653.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:33.053Z,1516405653.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:33.437Z,1516405653.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:33.452Z,1516405653.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:33.841Z,1516405653.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:33.859Z,1516405653.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:34.231Z,1516405654.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:34.250Z,1516405654.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:34.625Z,1516405654.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:34.642Z,1516405654.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:35.026Z,1516405655.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:35.045Z,1516405655.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:35.415Z,1516405655.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:35.441Z,1516405655.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:35.843Z,1516405655.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:35.858Z,1516405655.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:36.240Z,1516405656.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:36.284Z,1516405656.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:36.639Z,1516405656.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:36.659Z,1516405656.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:37.031Z,1516405657.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:37.053Z,1516405657.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:37.422Z,1516405657.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:37.448Z,1516405657.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:37.828Z,1516405657.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:37.842Z,1516405657.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:38.225Z,1516405658.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:38.248Z,1516405658.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:38.623Z,1516405658.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:38.648Z,1516405658.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:39.037Z,1516405659.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:39.060Z,1516405659.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:39.438Z,1516405659.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:39.471Z,1516405659.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:39.842Z,1516405659.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:39.856Z,1516405659.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:40.219Z,1516405660.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:40.245Z,1516405660.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:40.617Z,1516405660.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:40.655Z,1516405660.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:41.020Z,1516405661.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:41.045Z,1516405661.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:41.419Z,1516405661.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:41.447Z,1516405661.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:41.842Z,1516405661.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:41.858Z,1516405661.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:42.242Z,1516405662.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:42.263Z,1516405662.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:42.642Z,1516405662.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:42.656Z,1516405662.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:43.023Z,1516405663.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:43.048Z,1516405663.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:43.419Z,1516405663.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:43.444Z,1516405663.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:43.819Z,1516405663.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:43.852Z,1516405663.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:44.216Z,1516405664.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:44.238Z,1516405664.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:44.619Z,1516405664.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:44.650Z,1516405664.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:45.039Z,1516405665.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:45.053Z,1516405665.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:45.426Z,1516405665.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:45.462Z,1516405665.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:45.838Z,1516405665.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:45.852Z,1516405665.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:46.219Z,1516405666.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:46.251Z,1516405666.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:46.617Z,1516405666.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:46.639Z,1516405666.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:47.024Z,1516405667.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:47.055Z,1516405667.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:47.419Z,1516405667.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:47.455Z,1516405667.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:47.843Z,1516405667.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:47.857Z,1516405667.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:48.245Z,1516405668.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:48.259Z,1516405668.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:48.630Z,1516405668.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:48.667Z,1516405668.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:49.023Z,1516405669.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:49.054Z,1516405669.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:49.419Z,1516405669.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:49.454Z,1516405669.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:49.819Z,1516405669.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:49.851Z,1516405669.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:50.220Z,1516405670.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:50.234Z,1516405670.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:50.626Z,1516405670.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:50.662Z,1516405670.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:51.038Z,1516405671.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:51.071Z,1516405671.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:51.426Z,1516405671.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:51.440Z,1516405671.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:51.839Z,1516405671.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:51.862Z,1516405671.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:52.227Z,1516405672.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:52.263Z,1516405672.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:52.620Z,1516405672.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:52.634Z,1516405672.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:53.032Z,1516405673.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:53.046Z,1516405673.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:53.425Z,1516405673.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:53.439Z,1516405673.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:53.834Z,1516405673.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:53.848Z,1516405673.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:54.242Z,1516405674.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:54.272Z,1516405674.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:54.630Z,1516405674.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:54.644Z,1516405674.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:55.025Z,1516405675.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:55.047Z,1516405675.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:55.431Z,1516405675.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:55.445Z,1516405675.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:55.828Z,1516405675.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:55.842Z,1516405675.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:56.228Z,1516405676.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:56.242Z,1516405676.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:56.622Z,1516405676.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:56.650Z,1516405676.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:57.034Z,1516405677.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:57.049Z,1516405677.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:57.438Z,1516405677.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:57.452Z,1516405677.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:57.834Z,1516405677.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:57.848Z,1516405677.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:58.232Z,1516405678.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:58.246Z,1516405678.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:58.624Z,1516405678.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:58.650Z,1516405678.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:59.032Z,1516405679.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:59.051Z,1516405679.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:59.429Z,1516405679.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:59.443Z,1516405679.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:47:59.838Z,1516405679.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:47:59.853Z,1516405679.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:00.237Z,1516405680.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:00.259Z,1516405680.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:00.639Z,1516405680.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:00.655Z,1516405680.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:01.032Z,1516405681.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:01.051Z,1516405681.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:01.426Z,1516405681.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:01.444Z,1516405681.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:01.835Z,1516405681.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:01.849Z,1516405681.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:02.221Z,1516405682.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:02.263Z,1516405682.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:02.624Z,1516405682.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:02.650Z,1516405682.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:03.038Z,1516405683.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:03.069Z,1516405683.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:03.447Z,1516405683.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:03.461Z,1516405683.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:03.831Z,1516405683.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:03.863Z,1516405683.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:04.220Z,1516405684.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:04.248Z,1516405684.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:04.624Z,1516405684.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:04.656Z,1516405684.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:05.029Z,1516405685.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:05.060Z,1516405685.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:05.420Z,1516405685.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:05.435Z,1516405685.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:05.839Z,1516405685.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:05.863Z,1516405685.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:06.238Z,1516405686.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:06.262Z,1516405686.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:06.639Z,1516405686.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:06.663Z,1516405686.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:07.025Z,1516405687.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:07.039Z,1516405687.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:07.420Z,1516405687.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:07.439Z,1516405687.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:07.823Z,1516405687.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:07.837Z,1516405687.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:08.229Z,1516405688.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:08.243Z,1516405688.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:08.624Z,1516405688.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:08.643Z,1516405688.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:09.037Z,1516405689.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:09.051Z,1516405689.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:09.438Z,1516405689.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:09.452Z,1516405689.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:09.842Z,1516405689.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:09.874Z,1516405689.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:10.228Z,1516405690.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:10.242Z,1516405690.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:10.629Z,1516405690.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:10.643Z,1516405690.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:11.030Z,1516405691.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:11.044Z,1516405691.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:11.424Z,1516405691.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:11.438Z,1516405691.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:11.843Z,1516405691.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:11.874Z,1516405691.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:12.235Z,1516405692.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:12.249Z,1516405692.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:12.642Z,1516405692.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:12.656Z,1516405692.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:13.028Z,1516405693.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:13.043Z,1516405693.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:13.428Z,1516405693.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:13.443Z,1516405693.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:13.827Z,1516405693.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:13.840Z,1516405693.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:14.229Z,1516405694.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:14.243Z,1516405694.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:14.625Z,1516405694.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:14.643Z,1516405694.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:15.042Z,1516405695.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:15.056Z,1516405695.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:15.430Z,1516405695.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:15.444Z,1516405695.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:15.830Z,1516405695.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:15.844Z,1516405695.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:16.228Z,1516405696.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:16.242Z,1516405696.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:16.628Z,1516405696.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:16.643Z,1516405696.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:17.029Z,1516405697.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:17.051Z,1516405697.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:17.428Z,1516405697.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:17.442Z,1516405697.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:17.842Z,1516405697.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:17.856Z,1516405697.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:18.234Z,1516405698.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:18.248Z,1516405698.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:18.634Z,1516405698.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:18.654Z,1516405698.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:19.031Z,1516405699.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:19.045Z,1516405699.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:19.427Z,1516405699.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:19.441Z,1516405699.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:19.828Z,1516405699.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:19.842Z,1516405699.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:20.230Z,1516405700.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:20.244Z,1516405700.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:20.627Z,1516405700.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:20.647Z,1516405700.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:21.034Z,1516405701.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:21.048Z,1516405701.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:21.439Z,1516405701.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:21.459Z,1516405701.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:24.531Z,1516405704.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:24.545Z,1516405704.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:24.643Z,1516405704.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:24.683Z,1516405704.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:24.000Z,1516405705.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:25.028Z,1516405705.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:25.404Z,1516405705.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:25.428Z,1516405705.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:25.820Z,1516405705.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:25.834Z,1516405705.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:26.219Z,1516405706.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:26.233Z,1516405706.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:26.615Z,1516405706.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:26.634Z,1516405706.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:27.000Z,1516405707.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:27.028Z,1516405707.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:27.399Z,1516405707.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:27.428Z,1516405707.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:27.816Z,1516405707.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:27.830Z,1516405707.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:28.220Z,1516405708.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:28.234Z,1516405708.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:28.616Z,1516405708.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:28.630Z,1516405708.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:28.997Z,1516405708.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:29.027Z,1516405709.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:29.392Z,1516405709.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:29.407Z,1516405709.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:29.806Z,1516405709.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:29.831Z,1516405709.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:30.206Z,1516405710.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:30.233Z,1516405710.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:30.602Z,1516405710.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:30.632Z,1516405710.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:30.000Z,1516405711.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:31.014Z,1516405711.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:31.399Z,1516405711.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:31.413Z,1516405711.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:31.810Z,1516405711.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:31.842Z,1516405711.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:32.218Z,1516405712.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:32.251Z,1516405712.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:32.602Z,1516405712.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:32.616Z,1516405712.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:33.000Z,1516405713.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:33.014Z,1516405713.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:33.396Z,1516405713.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:33.418Z,1516405713.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:33.802Z,1516405713.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:33.816Z,1516405713.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:34.214Z,1516405714.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:34.244Z,1516405714.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:34.602Z,1516405714.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:34.616Z,1516405714.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:35.002Z,1516405715.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:35.016Z,1516405715.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:35.390Z,1516405715.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:35.411Z,1516405715.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:35.814Z,1516405715.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:35.843Z,1516405715.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:36.206Z,1516405716.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:36.219Z,1516405716.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:36.602Z,1516405716.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:36.623Z,1516405716.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:36.999Z,1516405716.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:37.018Z,1516405717.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:37.402Z,1516405717.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:37.416Z,1516405717.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:37.810Z,1516405717.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:37.825Z,1516405717.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:38.210Z,1516405718.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:38.224Z,1516405718.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:38.613Z,1516405718.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:38.626Z,1516405718.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:39.007Z,1516405719.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:39.021Z,1516405719.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:39.394Z,1516405719.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:39.429Z,1516405719.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:39.804Z,1516405719.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:39.827Z,1516405719.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:40.211Z,1516405720.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:40.231Z,1516405720.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:40.615Z,1516405720.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:40.629Z,1516405720.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:41.001Z,1516405721.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:41.019Z,1516405721.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:41.397Z,1516405721.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:41.420Z,1516405721.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:41.813Z,1516405721.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:41.829Z,1516405721.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:42.217Z,1516405722.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:42.232Z,1516405722.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:42.602Z,1516405722.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:42.623Z,1516405722.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:42.992Z,1516405722.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:43.022Z,1516405723.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:43.403Z,1516405723.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:43.417Z,1516405723.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:43.802Z,1516405723.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:43.832Z,1516405723.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:44.212Z,1516405724.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:44.230Z,1516405724.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:44.607Z,1516405724.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:44.620Z,1516405724.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:44.992Z,1516405724.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:45.026Z,1516405725.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:45.404Z,1516405725.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:45.418Z,1516405725.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:45.812Z,1516405725.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:45.882Z,1516405725.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:46.208Z,1516405726.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:46.238Z,1516405726.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:46.608Z,1516405726.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:46.640Z,1516405726.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:47.006Z,1516405727.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:47.048Z,1516405727.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:47.396Z,1516405727.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:47.411Z,1516405727.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:47.806Z,1516405727.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:47.827Z,1516405727.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:48.211Z,1516405728.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:48.265Z,1516405728.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:48.611Z,1516405728.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:48.656Z,1516405728.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:48.998Z,1516405728.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:49.027Z,1516405729.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:49.403Z,1516405729.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:49.422Z,1516405729.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:49.802Z,1516405729.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:49.825Z,1516405729.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:50.212Z,1516405730.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:50.238Z,1516405730.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:50.617Z,1516405730.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:50.647Z,1516405730.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:51.004Z,1516405731.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:51.052Z,1516405731.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:51.424Z,1516405731.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:51.450Z,1516405731.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:51.805Z,1516405731.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:51.856Z,1516405731.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:52.199Z,1516405732.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:52.259Z,1516405732.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:52.598Z,1516405732.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:52.652Z,1516405732.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:53.018Z,1516405733.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:53.031Z,1516405733.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:53.416Z,1516405733.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:53.439Z,1516405733.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:53.812Z,1516405733.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:53.835Z,1516405733.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:54.193Z,1516405734.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:54.263Z,1516405734.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:54.593Z,1516405734.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:54.626Z,1516405734.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:54.993Z,1516405734.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:55.035Z,1516405735.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:55.398Z,1516405735.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:55.475Z,1516405735.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:55.793Z,1516405735.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:55.839Z,1516405735.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:56.208Z,1516405736.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:56.247Z,1516405736.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:56.606Z,1516405736.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:56.639Z,1516405736.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:57.010Z,1516405737.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:57.033Z,1516405737.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:57.396Z,1516405737.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:57.415Z,1516405737.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:57.799Z,1516405737.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:57.813Z,1516405737.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:58.200Z,1516405738.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:58.214Z,1516405738.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:58.596Z,1516405738.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:58.615Z,1516405738.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:59.006Z,1516405739.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:59.037Z,1516405739.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:59.398Z,1516405739.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:59.412Z,1516405739.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:48:59.806Z,1516405739.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:48:59.836Z,1516405739.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:00.201Z,1516405740.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:00.242Z,1516405740.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:00.593Z,1516405740.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:00.607Z,1516405740.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:00.999Z,1516405740.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:01.015Z,1516405741.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:01.402Z,1516405741.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:01.416Z,1516405741.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:01.796Z,1516405741.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:01.811Z,1516405741.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:02.214Z,1516405742.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:02.235Z,1516405742.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:02.610Z,1516405742.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:02.638Z,1516405742.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:03.010Z,1516405743.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:03.039Z,1516405743.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:03.401Z,1516405743.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:03.415Z,1516405743.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:03.801Z,1516405743.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:03.815Z,1516405743.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:04.201Z,1516405744.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:04.215Z,1516405744.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:04.597Z,1516405744.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:04.611Z,1516405744.611 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:04.611Z,1516405744.611 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-01-19T23:49:04.611Z,1516405744.611 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:49:04.613Z,1516405744.613 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:04.613Z,1516405744.613 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-01-19T23:49:04.613Z,1516405744.613 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:49:04.615Z,1516405744.615 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:04.615Z,1516405744.615 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53
2018-01-19T23:49:04.615Z,1516405744.615 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:49:04.647Z,1516405744.647 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:49:04.647Z,1516405744.647 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:49:04.648Z,1516405744.648 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:49:05.014Z,1516405745.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:05.055Z,1516405745.055 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:49:05.055Z,1516405745.055 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-01-19T23:49:05.055Z,1516405745.055 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:49:05.055Z,1516405745.055 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-01-19T23:49:05.056Z,1516405745.056 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:49:05.056Z,1516405745.056 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53
2018-01-19T23:49:05.398Z,1516405745.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:05.411Z,1516405745.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:49:05.412Z,1516405745.412 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:49:05.412Z,1516405745.412 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:49:05.412Z,1516405745.412 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:49:05.413Z,1516405745.413 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:49:05.413Z,1516405745.413 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:49:05.414Z,1516405745.414 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:49:05.414Z,1516405745.414 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:49:05.414Z,1516405745.414 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:49:05.802Z,1516405745.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:05.816Z,1516405745.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:49:05.817Z,1516405745.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:06.201Z,1516405746.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:06.215Z,1516405746.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:49:06.216Z,1516405746.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:06.596Z,1516405746.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:06.610Z,1516405746.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:49:06.611Z,1516405746.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:06.999Z,1516405746.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:07.015Z,1516405747.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:49:07.015Z,1516405747.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:07.399Z,1516405747.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:07.425Z,1516405747.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:49:07.426Z,1516405747.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:07.803Z,1516405747.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:07.817Z,1516405747.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:49:07.818Z,1516405747.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:08.203Z,1516405748.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:08.222Z,1516405748.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:49:08.223Z,1516405748.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:08.610Z,1516405748.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:08.624Z,1516405748.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:49:08.625Z,1516405748.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:09.006Z,1516405749.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:09.020Z,1516405749.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:49:09.021Z,1516405749.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:09.399Z,1516405749.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:09.413Z,1516405749.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:49:09.414Z,1516405749.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:09.800Z,1516405749.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:09.814Z,1516405749.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:49:09.815Z,1516405749.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:10.194Z,1516405750.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:10.213Z,1516405750.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:49:10.214Z,1516405750.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:10.599Z,1516405750.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:10.613Z,1516405750.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:49:10.614Z,1516405750.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:11.006Z,1516405751.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:11.026Z,1516405751.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:49:11.027Z,1516405751.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:11.410Z,1516405751.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:11.424Z,1516405751.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:49:11.425Z,1516405751.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:11.809Z,1516405751.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:11.823Z,1516405751.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:49:11.824Z,1516405751.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:12.205Z,1516405752.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:12.218Z,1516405752.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:49:12.219Z,1516405752.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:12.601Z,1516405752.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:12.615Z,1516405752.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:49:12.616Z,1516405752.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:13.005Z,1516405753.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:13.019Z,1516405753.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:49:13.020Z,1516405753.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:13.410Z,1516405753.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:13.424Z,1516405753.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:49:13.425Z,1516405753.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:13.454Z,1516405753.454 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T23:49:13.790Z,1516405753.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:13.812Z,1516405753.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:49:13.817Z,1516405753.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:14.212Z,1516405754.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:14.226Z,1516405754.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:49:14.227Z,1516405754.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:14.615Z,1516405754.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:14.634Z,1516405754.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:49:14.635Z,1516405754.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:15.015Z,1516405755.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:15.030Z,1516405755.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:49:15.030Z,1516405755.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:15.392Z,1516405755.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:15.419Z,1516405755.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:49:15.420Z,1516405755.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:15.788Z,1516405755.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:15.819Z,1516405755.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:49:15.820Z,1516405755.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:16.189Z,1516405756.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:16.227Z,1516405756.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:49:16.228Z,1516405756.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:16.596Z,1516405756.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:16.622Z,1516405756.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:49:16.623Z,1516405756.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:17.006Z,1516405757.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:17.027Z,1516405757.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:49:17.028Z,1516405757.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:17.411Z,1516405757.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:17.426Z,1516405757.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:49:17.427Z,1516405757.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:17.821Z,1516405757.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:17.842Z,1516405757.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:49:17.843Z,1516405757.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:18.195Z,1516405758.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:18.223Z,1516405758.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:49:18.224Z,1516405758.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:18.587Z,1516405758.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:18.622Z,1516405758.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:49:18.623Z,1516405758.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:18.991Z,1516405758.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:19.017Z,1516405759.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:49:19.018Z,1516405759.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:19.388Z,1516405759.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:19.423Z,1516405759.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:49:19.423Z,1516405759.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:19.795Z,1516405759.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:19.820Z,1516405759.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:49:19.822Z,1516405759.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:20.210Z,1516405760.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:20.224Z,1516405760.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:49:20.226Z,1516405760.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:20.611Z,1516405760.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:20.625Z,1516405760.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:49:20.626Z,1516405760.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:20.998Z,1516405760.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:21.030Z,1516405761.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:49:21.031Z,1516405761.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:21.391Z,1516405761.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:21.422Z,1516405761.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:49:21.423Z,1516405761.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:21.788Z,1516405761.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:21.823Z,1516405761.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:49:21.824Z,1516405761.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:24.883Z,1516405764.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:24.897Z,1516405764.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:25.003Z,1516405765.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:25.043Z,1516405765.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:25.383Z,1516405765.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:25.397Z,1516405765.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:25.794Z,1516405765.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:25.808Z,1516405765.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:26.186Z,1516405766.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:26.200Z,1516405766.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:26.575Z,1516405766.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:26.589Z,1516405766.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:26.980Z,1516405766.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:26.995Z,1516405766.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:27.380Z,1516405767.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:27.395Z,1516405767.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:27.779Z,1516405767.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:27.793Z,1516405767.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:28.186Z,1516405768.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:28.200Z,1516405768.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:28.586Z,1516405768.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:28.600Z,1516405768.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:28.985Z,1516405768.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:28.999Z,1516405768.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:29.380Z,1516405769.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:29.395Z,1516405769.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:29.780Z,1516405769.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:29.794Z,1516405769.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:30.172Z,1516405770.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:30.190Z,1516405770.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:30.580Z,1516405770.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:30.594Z,1516405770.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:30.990Z,1516405770.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:31.004Z,1516405771.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:31.385Z,1516405771.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:31.398Z,1516405771.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:31.786Z,1516405771.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:31.800Z,1516405771.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:32.179Z,1516405772.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:32.199Z,1516405772.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:32.579Z,1516405772.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:32.593Z,1516405772.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:32.980Z,1516405772.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:32.995Z,1516405772.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:33.380Z,1516405773.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:33.395Z,1516405773.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:33.779Z,1516405773.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:33.793Z,1516405773.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:34.186Z,1516405774.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:34.200Z,1516405774.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:34.586Z,1516405774.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:34.600Z,1516405774.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:34.985Z,1516405774.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:34.999Z,1516405774.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:35.380Z,1516405775.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:35.399Z,1516405775.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:35.780Z,1516405775.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:35.799Z,1516405775.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:36.180Z,1516405776.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:36.194Z,1516405776.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:36.580Z,1516405776.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:36.599Z,1516405776.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:36.985Z,1516405776.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:36.999Z,1516405776.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:37.385Z,1516405777.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:37.398Z,1516405777.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:37.786Z,1516405777.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:37.800Z,1516405777.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:38.179Z,1516405778.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:38.194Z,1516405778.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:38.574Z,1516405778.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:38.594Z,1516405778.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:38.981Z,1516405778.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:38.999Z,1516405778.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:39.380Z,1516405779.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:39.395Z,1516405779.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:39.771Z,1516405779.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:39.785Z,1516405779.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:40.186Z,1516405780.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:40.207Z,1516405780.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:40.586Z,1516405780.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:40.600Z,1516405780.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:40.985Z,1516405780.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:41.002Z,1516405781.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:41.381Z,1516405781.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:41.399Z,1516405781.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:41.779Z,1516405781.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:41.794Z,1516405781.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:42.171Z,1516405782.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:42.190Z,1516405782.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:42.580Z,1516405782.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:42.595Z,1516405782.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:42.990Z,1516405782.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:43.006Z,1516405783.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:43.385Z,1516405783.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:43.406Z,1516405783.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:43.786Z,1516405783.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:43.807Z,1516405783.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:44.179Z,1516405784.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:44.199Z,1516405784.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:44.579Z,1516405784.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:44.593Z,1516405784.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:44.980Z,1516405784.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:44.999Z,1516405784.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:45.380Z,1516405785.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:45.395Z,1516405785.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:45.779Z,1516405785.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:45.793Z,1516405785.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:46.186Z,1516405786.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:46.207Z,1516405786.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:46.586Z,1516405786.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:46.600Z,1516405786.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:46.985Z,1516405786.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:46.999Z,1516405786.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:47.377Z,1516405787.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:47.391Z,1516405787.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:47.770Z,1516405787.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:47.788Z,1516405787.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:48.180Z,1516405788.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:48.194Z,1516405788.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:48.578Z,1516405788.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:48.592Z,1516405788.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:48.978Z,1516405788.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:49.006Z,1516405789.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:49.390Z,1516405789.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:49.404Z,1516405789.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:49.792Z,1516405789.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:49.806Z,1516405789.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:50.163Z,1516405790.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:50.202Z,1516405790.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:50.572Z,1516405790.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:50.598Z,1516405790.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:50.971Z,1516405790.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:51.007Z,1516405791.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:51.368Z,1516405791.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:51.398Z,1516405791.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:51.771Z,1516405791.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:51.805Z,1516405791.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:52.192Z,1516405792.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:52.215Z,1516405792.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:52.595Z,1516405792.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:52.615Z,1516405792.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:52.991Z,1516405792.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:53.007Z,1516405793.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:53.366Z,1516405793.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:53.380Z,1516405793.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:53.772Z,1516405793.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:53.807Z,1516405793.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:54.172Z,1516405794.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:54.210Z,1516405794.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:54.561Z,1516405794.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:54.576Z,1516405794.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:54.981Z,1516405794.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:54.995Z,1516405794.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:55.389Z,1516405795.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:55.403Z,1516405795.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:55.788Z,1516405795.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:55.802Z,1516405795.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:56.174Z,1516405796.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:56.193Z,1516405796.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:56.563Z,1516405796.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:56.598Z,1516405796.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:56.963Z,1516405796.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:56.994Z,1516405796.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:57.380Z,1516405797.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:57.394Z,1516405797.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:57.767Z,1516405797.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:57.793Z,1516405797.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:58.191Z,1516405798.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:58.205Z,1516405798.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:58.593Z,1516405798.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:58.607Z,1516405798.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:58.990Z,1516405798.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:59.004Z,1516405799.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:59.361Z,1516405799.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:59.387Z,1516405799.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:49:59.771Z,1516405799.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:49:59.797Z,1516405799.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:00.168Z,1516405800.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:00.198Z,1516405800.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:00.565Z,1516405800.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:00.603Z,1516405800.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:00.991Z,1516405800.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:01.005Z,1516405801.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:01.387Z,1516405801.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:01.401Z,1516405801.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:01.774Z,1516405801.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:01.811Z,1516405801.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:02.171Z,1516405802.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:02.202Z,1516405802.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:02.568Z,1516405802.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:02.603Z,1516405802.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:02.992Z,1516405802.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:03.006Z,1516405803.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:03.386Z,1516405803.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:03.408Z,1516405803.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:03.778Z,1516405803.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:03.804Z,1516405803.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:04.172Z,1516405804.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:04.203Z,1516405804.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:04.567Z,1516405804.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:04.599Z,1516405804.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:04.982Z,1516405804.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:05.008Z,1516405805.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:05.378Z,1516405805.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:05.415Z,1516405805.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:05.782Z,1516405805.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:05.806Z,1516405805.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:06.175Z,1516405806.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:06.213Z,1516405806.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:06.564Z,1516405806.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:06.579Z,1516405806.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:06.986Z,1516405806.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:07.015Z,1516405807.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:07.396Z,1516405807.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:07.411Z,1516405807.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:07.785Z,1516405807.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:07.810Z,1516405807.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:08.176Z,1516405808.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:08.206Z,1516405808.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:08.575Z,1516405808.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:08.589Z,1516405808.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:08.978Z,1516405808.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:08.992Z,1516405808.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:09.386Z,1516405809.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:09.416Z,1516405809.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:09.786Z,1516405809.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:09.818Z,1516405809.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:10.173Z,1516405810.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:10.188Z,1516405810.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:10.574Z,1516405810.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:10.588Z,1516405810.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:10.974Z,1516405810.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:10.988Z,1516405810.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:11.378Z,1516405811.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:11.392Z,1516405811.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:11.790Z,1516405811.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:11.818Z,1516405811.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:12.184Z,1516405812.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:12.198Z,1516405812.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:12.574Z,1516405812.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:12.588Z,1516405812.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:12.990Z,1516405812.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:13.004Z,1516405813.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:13.382Z,1516405813.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:13.395Z,1516405813.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:13.782Z,1516405813.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:13.796Z,1516405813.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:14.179Z,1516405814.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:14.199Z,1516405814.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:14.579Z,1516405814.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:14.593Z,1516405814.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:14.982Z,1516405814.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:14.996Z,1516405814.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:15.386Z,1516405815.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:15.400Z,1516405815.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:15.782Z,1516405815.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:15.802Z,1516405815.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:16.180Z,1516405816.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:16.194Z,1516405816.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:16.579Z,1516405816.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:16.594Z,1516405816.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:16.982Z,1516405816.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:16.996Z,1516405816.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:17.382Z,1516405817.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:17.397Z,1516405817.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:17.781Z,1516405817.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:17.803Z,1516405817.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:18.179Z,1516405818.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:18.193Z,1516405818.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:18.574Z,1516405818.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:18.588Z,1516405818.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:18.981Z,1516405818.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:18.995Z,1516405818.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:19.386Z,1516405819.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:19.400Z,1516405819.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:19.782Z,1516405819.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:19.796Z,1516405819.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:20.179Z,1516405820.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:20.199Z,1516405820.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:20.578Z,1516405820.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:20.591Z,1516405820.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:20.982Z,1516405820.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:20.996Z,1516405820.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:21.382Z,1516405821.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:21.403Z,1516405821.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:21.782Z,1516405821.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:21.797Z,1516405821.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:22.174Z,1516405822.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:22.188Z,1516405822.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:25.278Z,1516405825.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:25.292Z,1516405825.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:25.420Z,1516405825.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:25.434Z,1516405825.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:25.758Z,1516405825.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:25.780Z,1516405825.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:26.162Z,1516405826.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:26.188Z,1516405826.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:26.550Z,1516405826.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:26.564Z,1516405826.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:26.949Z,1516405826.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:26.963Z,1516405826.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:27.347Z,1516405827.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:27.362Z,1516405827.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:27.749Z,1516405827.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:27.772Z,1516405827.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:28.167Z,1516405828.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:28.195Z,1516405828.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:28.556Z,1516405828.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:28.570Z,1516405828.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:28.964Z,1516405828.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:28.995Z,1516405828.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:29.351Z,1516405829.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:29.366Z,1516405829.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:29.749Z,1516405829.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:29.764Z,1516405829.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:30.144Z,1516405830.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:30.166Z,1516405830.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:30.553Z,1516405830.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:30.568Z,1516405830.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:30.947Z,1516405830.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:30.979Z,1516405830.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:31.359Z,1516405831.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:31.374Z,1516405831.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:31.757Z,1516405831.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:31.771Z,1516405831.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:32.158Z,1516405832.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:32.172Z,1516405832.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:32.555Z,1516405832.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:32.569Z,1516405832.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:32.955Z,1516405832.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:32.970Z,1516405832.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:33.348Z,1516405833.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:33.361Z,1516405833.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:33.744Z,1516405833.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:33.765Z,1516405833.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:34.158Z,1516405834.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:34.179Z,1516405834.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:34.561Z,1516405834.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:34.575Z,1516405834.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:34.958Z,1516405834.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:34.972Z,1516405834.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:35.348Z,1516405835.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:35.366Z,1516405835.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:35.746Z,1516405835.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:35.762Z,1516405835.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:36.143Z,1516405836.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:36.165Z,1516405836.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:36.546Z,1516405836.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:36.568Z,1516405836.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:36.951Z,1516405836.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:36.970Z,1516405836.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:37.360Z,1516405837.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:37.374Z,1516405837.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:37.760Z,1516405837.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:37.774Z,1516405837.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:38.160Z,1516405838.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:38.174Z,1516405838.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:38.554Z,1516405838.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:38.569Z,1516405838.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:38.955Z,1516405838.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:38.971Z,1516405838.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:39.350Z,1516405839.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:39.364Z,1516405839.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:39.744Z,1516405839.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:39.771Z,1516405839.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:40.161Z,1516405840.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:40.175Z,1516405840.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:40.564Z,1516405840.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:40.578Z,1516405840.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:40.965Z,1516405840.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:40.979Z,1516405840.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:41.355Z,1516405841.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:41.375Z,1516405841.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:41.756Z,1516405841.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:41.770Z,1516405841.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:42.152Z,1516405842.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:42.187Z,1516405842.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:42.549Z,1516405842.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:42.562Z,1516405842.562 [PNI_TCM](ERROR): CRC does not match. Expected:0x14223 got:0x7489
2018-01-19T23:50:42.587Z,1516405842.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:42.956Z,1516405842.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:42.969Z,1516405842.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:43.365Z,1516405843.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:43.380Z,1516405843.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:43.764Z,1516405843.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:43.779Z,1516405843.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:44.166Z,1516405844.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:44.180Z,1516405844.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:44.555Z,1516405844.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:44.569Z,1516405844.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:44.950Z,1516405844.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:44.965Z,1516405844.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:45.337Z,1516405845.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:45.372Z,1516405845.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:45.754Z,1516405845.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:45.770Z,1516405845.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:46.160Z,1516405846.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:46.174Z,1516405846.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:46.566Z,1516405846.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:46.579Z,1516405846.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:46.962Z,1516405846.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:46.979Z,1516405846.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:47.340Z,1516405847.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:47.383Z,1516405847.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:47.757Z,1516405847.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:47.763Z,1516405847.763 [PNI_TCM](ERROR): CRC does not match. Expected:0x39264 got:0x6593
2018-01-19T23:50:47.790Z,1516405847.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:48.154Z,1516405848.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:48.175Z,1516405848.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:48.554Z,1516405848.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:48.587Z,1516405848.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:48.944Z,1516405848.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:48.974Z,1516405848.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:49.366Z,1516405849.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:49.380Z,1516405849.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:49.764Z,1516405849.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:49.778Z,1516405849.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:50.163Z,1516405850.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:50.187Z,1516405850.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:50.544Z,1516405850.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:50.564Z,1516405850.564 [PNI_TCM](ERROR): CRC does not match. Expected:0x60351 got:0x1730
2018-01-19T23:50:50.591Z,1516405850.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:50.940Z,1516405850.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:50.959Z,1516405850.959 [PNI_TCM](ERROR): CRC does not match. Expected:0x39154 got:0x5735
2018-01-19T23:50:50.987Z,1516405850.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:51.356Z,1516405851.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:51.370Z,1516405851.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:51.744Z,1516405851.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:51.787Z,1516405851.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:52.164Z,1516405852.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:52.180Z,1516405852.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:52.562Z,1516405852.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:52.576Z,1516405852.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:52.961Z,1516405852.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:52.975Z,1516405852.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:53.340Z,1516405853.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:53.384Z,1516405853.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:53.744Z,1516405853.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:53.774Z,1516405853.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:54.144Z,1516405854.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:54.173Z,1516405854.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:54.541Z,1516405854.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:54.572Z,1516405854.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:54.936Z,1516405854.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:54.974Z,1516405854.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:55.359Z,1516405855.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:55.377Z,1516405855.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:55.763Z,1516405855.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:55.778Z,1516405855.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:56.166Z,1516405856.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:56.180Z,1516405856.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:56.540Z,1516405856.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:56.587Z,1516405856.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:56.944Z,1516405856.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:56.971Z,1516405856.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:57.337Z,1516405857.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:57.374Z,1516405857.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:57.740Z,1516405857.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:57.774Z,1516405857.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:58.154Z,1516405858.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:58.190Z,1516405858.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:58.567Z,1516405858.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:58.584Z,1516405858.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:58.964Z,1516405858.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:58.981Z,1516405858.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:59.340Z,1516405859.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:59.387Z,1516405859.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:50:59.744Z,1516405859.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:50:59.793Z,1516405859.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:00.142Z,1516405860.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:00.167Z,1516405860.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:00.541Z,1516405860.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:00.570Z,1516405860.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:00.936Z,1516405860.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:00.974Z,1516405860.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:01.362Z,1516405861.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:01.377Z,1516405861.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:01.762Z,1516405861.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:01.778Z,1516405861.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:02.155Z,1516405862.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:02.173Z,1516405862.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:02.540Z,1516405862.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:02.569Z,1516405862.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:02.940Z,1516405862.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:02.965Z,1516405862.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:03.337Z,1516405863.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:03.372Z,1516405863.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:03.744Z,1516405863.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:03.772Z,1516405863.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:04.160Z,1516405864.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:04.177Z,1516405864.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:04.563Z,1516405864.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:04.612Z,1516405864.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:04.963Z,1516405864.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:04.978Z,1516405864.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:05.343Z,1516405865.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:05.379Z,1516405865.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:05.742Z,1516405865.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:05.780Z,1516405865.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:06.156Z,1516405866.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:06.170Z,1516405866.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:06.542Z,1516405866.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:06.569Z,1516405866.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:06.936Z,1516405866.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:06.970Z,1516405866.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:07.351Z,1516405867.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:07.385Z,1516405867.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:07.767Z,1516405867.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:07.786Z,1516405867.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:08.164Z,1516405868.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:08.178Z,1516405868.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:08.538Z,1516405868.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:08.566Z,1516405868.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:08.944Z,1516405868.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:08.975Z,1516405868.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:09.337Z,1516405869.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:09.373Z,1516405869.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:09.734Z,1516405869.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:09.748Z,1516405869.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:10.150Z,1516405870.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:10.191Z,1516405870.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:10.568Z,1516405870.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:10.587Z,1516405870.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:10.954Z,1516405870.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:10.980Z,1516405870.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:11.340Z,1516405871.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:11.375Z,1516405871.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:11.744Z,1516405871.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:11.757Z,1516405871.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:12.148Z,1516405872.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:12.162Z,1516405872.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:12.547Z,1516405872.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:12.569Z,1516405872.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:12.946Z,1516405872.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:12.967Z,1516405872.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:13.347Z,1516405873.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:13.375Z,1516405873.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:13.758Z,1516405873.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:13.772Z,1516405873.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:14.159Z,1516405874.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:14.172Z,1516405874.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:14.538Z,1516405874.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:14.564Z,1516405874.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:14.952Z,1516405874.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:14.971Z,1516405874.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:15.337Z,1516405875.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:15.372Z,1516405875.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:15.746Z,1516405875.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:15.764Z,1516405875.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:16.162Z,1516405876.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:16.183Z,1516405876.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:16.563Z,1516405876.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:16.577Z,1516405876.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:16.962Z,1516405876.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:16.976Z,1516405876.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:17.340Z,1516405877.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:17.371Z,1516405877.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:17.752Z,1516405877.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:17.766Z,1516405877.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:18.135Z,1516405878.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:18.170Z,1516405878.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:18.549Z,1516405878.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:18.579Z,1516405878.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:18.944Z,1516405878.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:18.971Z,1516405878.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:19.350Z,1516405879.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:19.381Z,1516405879.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:19.766Z,1516405879.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:19.780Z,1516405879.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:20.155Z,1516405880.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:20.170Z,1516405880.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:20.538Z,1516405880.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:20.585Z,1516405880.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:20.944Z,1516405880.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:20.969Z,1516405880.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:21.337Z,1516405881.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:21.371Z,1516405881.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:21.738Z,1516405881.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:21.771Z,1516405881.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:22.154Z,1516405882.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:22.176Z,1516405882.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:22.567Z,1516405882.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:22.580Z,1516405882.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:25.651Z,1516405885.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:25.671Z,1516405885.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:25.772Z,1516405885.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:25.816Z,1516405885.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:26.127Z,1516405886.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:26.163Z,1516405886.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:26.528Z,1516405886.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:26.543Z,1516405886.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:26.927Z,1516405886.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:26.947Z,1516405886.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:27.343Z,1516405887.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:27.371Z,1516405887.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:27.730Z,1516405887.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:27.750Z,1516405887.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:28.139Z,1516405888.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:28.169Z,1516405888.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:28.528Z,1516405888.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:28.543Z,1516405888.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:28.928Z,1516405888.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:28.943Z,1516405888.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:29.326Z,1516405889.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:29.342Z,1516405889.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:29.725Z,1516405889.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:29.747Z,1516405889.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:30.134Z,1516405890.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:30.148Z,1516405890.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:30.539Z,1516405890.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:30.553Z,1516405890.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:30.933Z,1516405890.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:30.955Z,1516405890.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:31.332Z,1516405891.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:31.346Z,1516405891.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:31.732Z,1516405891.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:31.746Z,1516405891.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:32.132Z,1516405892.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:32.146Z,1516405892.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:32.525Z,1516405892.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:32.546Z,1516405892.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:32.932Z,1516405892.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:32.946Z,1516405892.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:33.335Z,1516405893.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:33.349Z,1516405893.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:33.738Z,1516405893.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:33.752Z,1516405893.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:34.135Z,1516405894.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:34.149Z,1516405894.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:34.526Z,1516405894.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:34.547Z,1516405894.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:34.932Z,1516405894.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:34.946Z,1516405894.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:35.332Z,1516405895.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:35.351Z,1516405895.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:35.727Z,1516405895.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:35.747Z,1516405895.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:36.134Z,1516405896.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:36.148Z,1516405896.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:36.539Z,1516405896.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:36.553Z,1516405896.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:36.935Z,1516405896.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:36.949Z,1516405896.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:37.332Z,1516405897.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:37.346Z,1516405897.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:37.727Z,1516405897.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:37.747Z,1516405897.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:38.127Z,1516405898.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:38.147Z,1516405898.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:38.532Z,1516405898.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:38.546Z,1516405898.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:38.932Z,1516405898.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:38.946Z,1516405898.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:39.334Z,1516405899.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:39.348Z,1516405899.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:39.734Z,1516405899.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:39.748Z,1516405899.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:40.135Z,1516405900.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:40.149Z,1516405900.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:40.532Z,1516405900.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:40.547Z,1516405900.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:40.933Z,1516405900.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:40.947Z,1516405900.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:41.333Z,1516405901.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:41.347Z,1516405901.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:41.734Z,1516405901.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:41.748Z,1516405901.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:42.135Z,1516405902.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:42.149Z,1516405902.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:42.534Z,1516405902.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:42.548Z,1516405902.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:42.935Z,1516405902.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:42.984Z,1516405902.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:43.334Z,1516405903.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:43.348Z,1516405903.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:43.725Z,1516405903.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:43.745Z,1516405903.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:44.137Z,1516405904.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:44.151Z,1516405904.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:44.539Z,1516405904.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:44.552Z,1516405904.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:44.937Z,1516405904.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:44.951Z,1516405904.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:45.333Z,1516405905.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:45.347Z,1516405905.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:45.734Z,1516405905.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:45.748Z,1516405905.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:46.137Z,1516405906.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:46.151Z,1516405906.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:46.535Z,1516405906.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:46.555Z,1516405906.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:46.934Z,1516405906.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:46.950Z,1516405906.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:47.332Z,1516405907.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:47.352Z,1516405907.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:47.727Z,1516405907.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:47.747Z,1516405907.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:48.135Z,1516405908.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:48.149Z,1516405908.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:48.532Z,1516405908.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:48.551Z,1516405908.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:48.935Z,1516405908.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:48.949Z,1516405908.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:49.324Z,1516405909.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:49.339Z,1516405909.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:49.745Z,1516405909.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:49.759Z,1516405909.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:50.137Z,1516405910.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:50.151Z,1516405910.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:50.538Z,1516405910.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:50.552Z,1516405910.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:50.931Z,1516405910.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:50.957Z,1516405910.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:51.332Z,1516405911.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:51.347Z,1516405911.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:51.715Z,1516405911.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:51.751Z,1516405911.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:52.142Z,1516405912.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:52.163Z,1516405912.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:52.545Z,1516405912.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:52.559Z,1516405912.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:52.944Z,1516405912.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:52.958Z,1516405912.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:53.331Z,1516405913.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:53.346Z,1516405913.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:53.720Z,1516405913.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:53.751Z,1516405913.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:54.144Z,1516405914.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:54.158Z,1516405914.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:54.540Z,1516405914.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:54.554Z,1516405914.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:54.944Z,1516405914.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:54.963Z,1516405914.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:55.324Z,1516405915.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:55.352Z,1516405915.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:55.713Z,1516405915.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:55.735Z,1516405915.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:56.140Z,1516405916.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:56.155Z,1516405916.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:56.535Z,1516405916.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:56.563Z,1516405916.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:56.926Z,1516405916.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:56.962Z,1516405916.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:57.320Z,1516405917.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:57.350Z,1516405917.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:57.723Z,1516405917.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:57.756Z,1516405917.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:58.126Z,1516405918.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:58.163Z,1516405918.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:58.547Z,1516405918.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:58.562Z,1516405918.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:58.930Z,1516405918.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:58.956Z,1516405918.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:59.324Z,1516405919.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:59.359Z,1516405919.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:51:59.722Z,1516405919.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:51:59.763Z,1516405919.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:00.138Z,1516405920.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:00.163Z,1516405920.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:00.526Z,1516405920.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:00.565Z,1516405920.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:00.939Z,1516405920.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:00.960Z,1516405920.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:01.328Z,1516405921.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:01.342Z,1516405921.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:01.715Z,1516405921.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:01.741Z,1516405921.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:02.143Z,1516405922.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:02.171Z,1516405922.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:02.530Z,1516405922.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:02.544Z,1516405922.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:02.939Z,1516405922.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:02.967Z,1516405922.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:03.323Z,1516405923.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:03.342Z,1516405923.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:03.728Z,1516405923.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:03.743Z,1516405923.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:04.131Z,1516405924.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:04.145Z,1516405924.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:04.534Z,1516405924.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:04.548Z,1516405924.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:04.943Z,1516405924.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:04.978Z,1516405924.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:05.326Z,1516405925.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:05.340Z,1516405925.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:05.725Z,1516405925.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:05.748Z,1516405925.748 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:05.748Z,1516405925.748 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-01-19T23:52:05.748Z,1516405925.748 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:52:05.754Z,1516405925.754 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:05.754Z,1516405925.754 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-01-19T23:52:05.754Z,1516405925.754 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:52:05.756Z,1516405925.756 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:05.756Z,1516405925.756 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54
2018-01-19T23:52:05.756Z,1516405925.756 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:52:05.776Z,1516405925.776 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:52:05.776Z,1516405925.776 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:52:05.776Z,1516405925.776 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:52:06.135Z,1516405926.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:06.159Z,1516405926.159 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:52:06.159Z,1516405926.159 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-01-19T23:52:06.160Z,1516405926.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:52:06.160Z,1516405926.160 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-01-19T23:52:06.160Z,1516405926.160 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:52:06.160Z,1516405926.160 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54
2018-01-19T23:52:06.531Z,1516405926.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:06.548Z,1516405926.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:52:06.553Z,1516405926.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:52:06.553Z,1516405926.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:52:06.554Z,1516405926.554 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:52:06.554Z,1516405926.554 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:52:06.554Z,1516405926.554 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:52:06.555Z,1516405926.555 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:52:06.555Z,1516405926.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:52:06.555Z,1516405926.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:52:06.938Z,1516405926.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:06.957Z,1516405926.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:52:06.958Z,1516405926.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:07.334Z,1516405927.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:07.347Z,1516405927.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:52:07.348Z,1516405927.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:07.732Z,1516405927.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:07.751Z,1516405927.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:52:07.751Z,1516405927.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:08.139Z,1516405928.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:08.153Z,1516405928.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:52:08.154Z,1516405928.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:08.545Z,1516405928.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:08.559Z,1516405928.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:52:08.560Z,1516405928.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:08.942Z,1516405928.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:08.956Z,1516405928.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:52:08.957Z,1516405928.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:09.320Z,1516405929.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:09.346Z,1516405929.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:52:09.347Z,1516405929.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:09.715Z,1516405929.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:09.747Z,1516405929.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:52:09.748Z,1516405929.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:10.134Z,1516405930.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:10.153Z,1516405930.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:52:10.154Z,1516405930.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:10.542Z,1516405930.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:10.556Z,1516405930.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:52:10.557Z,1516405930.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:10.944Z,1516405930.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:10.957Z,1516405930.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:52:10.958Z,1516405930.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:11.318Z,1516405931.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:11.343Z,1516405931.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:52:11.344Z,1516405931.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:11.719Z,1516405931.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:11.750Z,1516405931.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:52:11.751Z,1516405931.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:12.144Z,1516405932.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:12.157Z,1516405932.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:52:12.158Z,1516405932.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:12.533Z,1516405932.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:12.547Z,1516405932.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:52:12.548Z,1516405932.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:12.938Z,1516405932.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:12.952Z,1516405932.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:52:12.953Z,1516405932.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:13.320Z,1516405933.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:13.355Z,1516405933.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:52:13.356Z,1516405933.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:13.713Z,1516405933.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:13.739Z,1516405933.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:52:13.740Z,1516405933.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:14.143Z,1516405934.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:14.157Z,1516405934.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:52:14.158Z,1516405934.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:14.539Z,1516405934.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:14.555Z,1516405934.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:52:14.555Z,1516405934.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:14.943Z,1516405934.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:14.957Z,1516405934.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:52:14.958Z,1516405934.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:15.324Z,1516405935.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:15.350Z,1516405935.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:52:15.351Z,1516405935.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:15.719Z,1516405935.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:15.746Z,1516405935.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:52:15.747Z,1516405935.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:16.143Z,1516405936.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:16.162Z,1516405936.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:52:16.163Z,1516405936.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:16.543Z,1516405936.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:16.557Z,1516405936.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:52:16.558Z,1516405936.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:16.943Z,1516405936.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:16.957Z,1516405936.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:52:16.958Z,1516405936.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:17.321Z,1516405937.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:17.347Z,1516405937.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:52:17.348Z,1516405937.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:17.719Z,1516405937.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:17.744Z,1516405937.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:52:17.746Z,1516405937.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:18.137Z,1516405938.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:18.150Z,1516405938.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:52:18.151Z,1516405938.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:18.539Z,1516405938.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:18.553Z,1516405938.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:52:18.554Z,1516405938.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:18.939Z,1516405938.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:18.953Z,1516405938.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:52:18.954Z,1516405938.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:19.315Z,1516405939.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:19.352Z,1516405939.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:52:19.353Z,1516405939.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:19.714Z,1516405939.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:19.736Z,1516405939.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:52:19.740Z,1516405939.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:20.123Z,1516405940.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:20.148Z,1516405940.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:52:20.150Z,1516405940.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:20.526Z,1516405940.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:20.554Z,1516405940.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:52:20.555Z,1516405940.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:20.930Z,1516405940.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:20.964Z,1516405940.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:52:20.966Z,1516405940.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:20.969Z,1516405940.969 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T23:47:20.7Z
2018-01-19T23:52:20.969Z,1516405940.969 [Default:CheckIn:Read_GPS] Stopped
2018-01-19T23:52:20.969Z,1516405940.969 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-19T23:52:21.342Z,1516405941.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:21.360Z,1516405941.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:52:21.361Z,1516405941.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:21.771Z,1516405941.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:21.784Z,1516405941.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:52:21.785Z,1516405941.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:22.120Z,1516405942.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:22.135Z,1516405942.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:52:22.136Z,1516405942.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:25.300Z,1516405945.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:25.313Z,1516405945.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:52:25.314Z,1516405945.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:25.398Z,1516405945.398 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0064.lzma
2018-01-19T23:52:25.419Z,1516405945.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:25.465Z,1516405945.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-19T23:52:25.466Z,1516405945.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:25.786Z,1516405945.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:25.809Z,1516405945.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:26.139Z,1516405946.139 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0064.lzma.bak
2018-01-19T23:52:26.139Z,1516405946.139 [DataOverHttps](INFO): SBD MOMSN=7725045
2018-01-19T23:52:26.203Z,1516405946.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:26.217Z,1516405946.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:26.670Z,1516405946.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:26.691Z,1516405946.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:26.971Z,1516405946.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:26.986Z,1516405946.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:30.061Z,1516405950.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:30.076Z,1516405950.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:30.170Z,1516405950.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:30.212Z,1516405950.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:30.543Z,1516405950.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:30.571Z,1516405950.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:30.946Z,1516405950.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:30.971Z,1516405950.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:31.343Z,1516405951.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:31.366Z,1516405951.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:31.736Z,1516405951.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:31.768Z,1516405951.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:34.859Z,1516405954.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:34.873Z,1516405954.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:34.957Z,1516405954.957 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180119T210901/Express0065.lzma
2018-01-19T23:52:34.979Z,1516405954.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:35.024Z,1516405955.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:35.335Z,1516405955.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:35.361Z,1516405955.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:35.700Z,1516405955.700 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0065.lzma.bak
2018-01-19T23:52:35.700Z,1516405955.700 [DataOverHttps](INFO): SBD MOMSN=7725047
2018-01-19T23:52:35.757Z,1516405955.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:35.771Z,1516405955.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:36.226Z,1516405956.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:36.240Z,1516405956.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:36.243Z,1516405956.243 [Default:CheckIn:Read_Iridium] Stopped
2018-01-19T23:52:36.243Z,1516405956.243 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-19T23:52:36.243Z,1516405956.243 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-19T23:52:36.526Z,1516405956.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:36.542Z,1516405956.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:39.620Z,1516405959.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:39.634Z,1516405959.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:39.728Z,1516405959.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:39.773Z,1516405959.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:40.110Z,1516405960.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:40.124Z,1516405960.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:40.511Z,1516405960.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:40.525Z,1516405960.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:40.898Z,1516405960.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:40.923Z,1516405960.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:41.291Z,1516405961.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:41.322Z,1516405961.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:41.684Z,1516405961.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:41.698Z,1516405961.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:42.087Z,1516405962.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:42.127Z,1516405962.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:42.502Z,1516405962.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:42.525Z,1516405962.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:42.906Z,1516405962.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:42.930Z,1516405962.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:43.302Z,1516405963.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:43.325Z,1516405963.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:43.691Z,1516405963.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:43.727Z,1516405963.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:44.091Z,1516405964.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:44.105Z,1516405964.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:44.489Z,1516405964.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:44.503Z,1516405964.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:44.891Z,1516405964.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:44.911Z,1516405964.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:45.302Z,1516405965.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:45.336Z,1516405965.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:45.698Z,1516405965.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:45.712Z,1516405965.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:46.098Z,1516405966.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:46.112Z,1516405966.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:46.492Z,1516405966.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:46.506Z,1516405966.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:46.893Z,1516405966.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:46.911Z,1516405966.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:47.288Z,1516405967.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:47.307Z,1516405967.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:47.689Z,1516405967.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:47.703Z,1516405967.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:48.089Z,1516405968.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:48.107Z,1516405968.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:48.506Z,1516405968.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:48.537Z,1516405968.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:48.906Z,1516405968.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:48.932Z,1516405968.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:49.302Z,1516405969.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:49.316Z,1516405969.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:49.692Z,1516405969.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:49.711Z,1516405969.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:50.091Z,1516405970.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:50.105Z,1516405970.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:50.493Z,1516405970.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:50.515Z,1516405970.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:50.889Z,1516405970.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:50.911Z,1516405970.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:51.302Z,1516405971.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:51.316Z,1516405971.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:51.702Z,1516405971.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:51.716Z,1516405971.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:52.100Z,1516405972.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:52.119Z,1516405972.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:52.496Z,1516405972.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:52.510Z,1516405972.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:52.896Z,1516405972.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:52.915Z,1516405972.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:53.296Z,1516405973.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:53.310Z,1516405973.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:53.698Z,1516405973.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:53.711Z,1516405973.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:54.096Z,1516405974.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:54.115Z,1516405974.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:54.502Z,1516405974.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:54.516Z,1516405974.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:54.902Z,1516405974.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:54.916Z,1516405974.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:55.302Z,1516405975.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:55.316Z,1516405975.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:55.700Z,1516405975.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:55.714Z,1516405975.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:56.094Z,1516405976.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:56.108Z,1516405976.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:56.488Z,1516405976.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:56.508Z,1516405976.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:56.889Z,1516405976.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:56.907Z,1516405976.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:57.305Z,1516405977.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:57.322Z,1516405977.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:57.694Z,1516405977.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:57.717Z,1516405977.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:58.104Z,1516405978.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:58.118Z,1516405978.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:58.498Z,1516405978.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:58.512Z,1516405978.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:58.879Z,1516405978.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:58.907Z,1516405978.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:59.283Z,1516405979.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:59.311Z,1516405979.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:52:59.680Z,1516405979.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:52:59.708Z,1516405979.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:00.095Z,1516405980.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:00.112Z,1516405980.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:00.502Z,1516405980.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:00.517Z,1516405980.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:00.903Z,1516405980.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:00.918Z,1516405980.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:01.298Z,1516405981.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:01.320Z,1516405981.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:01.683Z,1516405981.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:01.714Z,1516405981.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:02.078Z,1516405982.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:02.112Z,1516405982.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:02.484Z,1516405982.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:02.509Z,1516405982.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:02.883Z,1516405982.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:02.914Z,1516405982.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:03.290Z,1516405983.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:03.310Z,1516405983.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:03.702Z,1516405983.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:03.716Z,1516405983.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:04.098Z,1516405984.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:04.112Z,1516405984.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:04.487Z,1516405984.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:04.501Z,1516405984.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:04.906Z,1516405984.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:04.937Z,1516405984.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:05.295Z,1516405985.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:05.320Z,1516405985.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:05.680Z,1516405985.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:05.722Z,1516405985.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:06.088Z,1516405986.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:06.118Z,1516405986.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:06.466Z,1516405986.466 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-19T23:53:06.466Z,1516405986.466 [NAL9602] Data Fault, FailCount= 5
2018-01-19T23:53:06.466Z,1516405986.466 [NAL9602](ERROR): Data Fault
2018-01-19T23:53:06.484Z,1516405986.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:06.511Z,1516405986.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:06.545Z,1516405986.545 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-19T23:53:06.545Z,1516405986.545 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-19T23:53:06.866Z,1516405986.866 [NAL9602](INFO): Powering down
2018-01-19T23:53:06.884Z,1516405986.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:06.898Z,1516405986.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:06.942Z,1516405986.942 [CBIT](INFO): Critical error at 20180119T235306
2018-01-19T23:53:07.288Z,1516405987.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:07.303Z,1516405987.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:07.692Z,1516405987.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:07.711Z,1516405987.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:08.092Z,1516405988.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:08.106Z,1516405988.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:08.484Z,1516405988.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:08.498Z,1516405988.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:08.888Z,1516405988.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:08.903Z,1516405988.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:09.287Z,1516405989.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:09.314Z,1516405989.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:09.684Z,1516405989.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:09.699Z,1516405989.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:10.095Z,1516405990.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:10.109Z,1516405990.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:10.486Z,1516405990.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:10.506Z,1516405990.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:10.887Z,1516405990.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:10.901Z,1516405990.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:11.290Z,1516405991.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:11.304Z,1516405991.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:11.686Z,1516405991.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:11.706Z,1516405991.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:12.087Z,1516405992.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:12.101Z,1516405992.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:12.489Z,1516405992.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:12.503Z,1516405992.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:12.885Z,1516405992.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:12.906Z,1516405992.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:13.283Z,1516405993.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:13.298Z,1516405993.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:13.688Z,1516405993.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:13.703Z,1516405993.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:14.086Z,1516405994.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:14.099Z,1516405994.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:14.487Z,1516405994.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:14.501Z,1516405994.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:14.891Z,1516405994.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:14.911Z,1516405994.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:15.291Z,1516405995.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:15.305Z,1516405995.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:15.687Z,1516405995.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:15.702Z,1516405995.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:16.089Z,1516405996.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:16.103Z,1516405996.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:16.486Z,1516405996.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:16.500Z,1516405996.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:16.892Z,1516405996.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:16.906Z,1516405996.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:17.289Z,1516405997.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:17.304Z,1516405997.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:17.686Z,1516405997.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:17.700Z,1516405997.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:18.091Z,1516405998.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:18.106Z,1516405998.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:18.489Z,1516405998.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:18.503Z,1516405998.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:18.886Z,1516405998.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:18.906Z,1516405998.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:19.286Z,1516405999.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:19.300Z,1516405999.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:19.686Z,1516405999.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:19.717Z,1516405999.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:20.094Z,1516406000.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:20.108Z,1516406000.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:20.476Z,1516406000.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:20.507Z,1516406000.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:20.883Z,1516406000.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:20.907Z,1516406000.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:21.278Z,1516406001.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:21.310Z,1516406001.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:21.676Z,1516406001.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:21.698Z,1516406001.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:22.083Z,1516406002.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:22.114Z,1516406002.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:22.478Z,1516406002.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:22.514Z,1516406002.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:22.887Z,1516406002.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:22.911Z,1516406002.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:23.283Z,1516406003.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:23.314Z,1516406003.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:23.678Z,1516406003.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:23.710Z,1516406003.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:24.087Z,1516406004.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:24.111Z,1516406004.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:24.483Z,1516406004.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:24.514Z,1516406004.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:24.878Z,1516406004.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:24.910Z,1516406004.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:25.282Z,1516406005.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:25.319Z,1516406005.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:25.683Z,1516406005.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:25.713Z,1516406005.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:26.079Z,1516406006.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:26.092Z,1516406006.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:26.478Z,1516406006.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:26.493Z,1516406006.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:26.891Z,1516406006.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:26.922Z,1516406006.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:27.282Z,1516406007.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:27.296Z,1516406007.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:27.680Z,1516406007.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:27.694Z,1516406007.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:28.091Z,1516406008.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:28.121Z,1516406008.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:28.491Z,1516406008.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:28.504Z,1516406008.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:28.883Z,1516406008.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:28.897Z,1516406008.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:29.291Z,1516406009.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:29.305Z,1516406009.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:29.691Z,1516406009.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:29.704Z,1516406009.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:30.083Z,1516406010.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:30.097Z,1516406010.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:30.495Z,1516406010.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:30.509Z,1516406010.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:30.891Z,1516406010.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:30.905Z,1516406010.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:31.287Z,1516406011.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:31.302Z,1516406011.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:31.689Z,1516406011.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:31.703Z,1516406011.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:32.089Z,1516406012.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:32.103Z,1516406012.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:32.487Z,1516406012.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:32.501Z,1516406012.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:32.887Z,1516406012.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:32.909Z,1516406012.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:33.293Z,1516406013.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:33.307Z,1516406013.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:33.688Z,1516406013.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:33.702Z,1516406013.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:34.089Z,1516406014.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:34.108Z,1516406014.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:34.495Z,1516406014.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:34.509Z,1516406014.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:34.895Z,1516406014.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:34.909Z,1516406014.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:35.295Z,1516406015.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:35.315Z,1516406015.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:35.695Z,1516406015.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:35.709Z,1516406015.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:36.091Z,1516406016.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:36.106Z,1516406016.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:36.488Z,1516406016.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:36.514Z,1516406016.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:36.896Z,1516406016.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:36.910Z,1516406016.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:41.050Z,1516406021.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:41.077Z,1516406021.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:41.213Z,1516406021.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:41.227Z,1516406021.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:41.565Z,1516406021.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:41.622Z,1516406021.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:41.966Z,1516406021.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:42.009Z,1516406022.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:42.389Z,1516406022.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:42.411Z,1516406022.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:42.802Z,1516406022.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:42.867Z,1516406022.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:43.163Z,1516406023.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:43.207Z,1516406023.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:43.562Z,1516406023.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:43.608Z,1516406023.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:43.963Z,1516406023.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:44.024Z,1516406024.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:44.363Z,1516406024.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:44.410Z,1516406024.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:44.763Z,1516406024.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:44.790Z,1516406024.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:45.164Z,1516406025.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:45.215Z,1516406025.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:45.600Z,1516406025.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:45.662Z,1516406025.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:45.965Z,1516406025.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:46.028Z,1516406026.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:46.362Z,1516406026.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:46.394Z,1516406026.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:46.774Z,1516406026.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:46.793Z,1516406026.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:47.179Z,1516406027.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:47.234Z,1516406027.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:47.574Z,1516406027.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:47.588Z,1516406027.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:47.992Z,1516406027.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:48.035Z,1516406028.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:48.357Z,1516406028.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:48.399Z,1516406028.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:48.757Z,1516406028.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:48.796Z,1516406028.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:49.157Z,1516406029.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:49.199Z,1516406029.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:49.556Z,1516406029.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:49.599Z,1516406029.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:49.957Z,1516406029.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:50.006Z,1516406030.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:50.357Z,1516406030.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:50.399Z,1516406030.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:50.769Z,1516406030.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:50.799Z,1516406030.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:51.171Z,1516406031.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:51.201Z,1516406031.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:51.554Z,1516406031.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:51.568Z,1516406031.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:51.960Z,1516406031.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:51.973Z,1516406031.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:52.363Z,1516406032.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:52.377Z,1516406032.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:52.755Z,1516406032.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:52.769Z,1516406032.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:53.157Z,1516406033.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:53.170Z,1516406033.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:53.563Z,1516406033.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:53.577Z,1516406033.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:53.958Z,1516406033.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:53.972Z,1516406033.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:54.360Z,1516406034.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:54.382Z,1516406034.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:54.764Z,1516406034.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:54.778Z,1516406034.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:55.163Z,1516406035.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:55.178Z,1516406035.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:55.563Z,1516406035.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:55.577Z,1516406035.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:55.960Z,1516406035.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:55.974Z,1516406035.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:56.357Z,1516406036.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:56.371Z,1516406036.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:56.760Z,1516406036.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:56.774Z,1516406036.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:57.161Z,1516406037.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:57.187Z,1516406037.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:57.561Z,1516406037.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:57.575Z,1516406037.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:57.963Z,1516406037.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:57.977Z,1516406037.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:58.365Z,1516406038.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:58.379Z,1516406038.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:58.758Z,1516406038.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:58.773Z,1516406038.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:59.159Z,1516406039.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:59.186Z,1516406039.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:59.565Z,1516406039.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:59.579Z,1516406039.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:53:59.973Z,1516406039.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:53:59.988Z,1516406039.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:00.362Z,1516406040.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:00.376Z,1516406040.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:00.762Z,1516406040.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:00.776Z,1516406040.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:01.163Z,1516406041.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:01.178Z,1516406041.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:01.565Z,1516406041.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:01.578Z,1516406041.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:01.964Z,1516406041.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:01.983Z,1516406041.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:02.366Z,1516406042.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:02.380Z,1516406042.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:02.766Z,1516406042.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:02.779Z,1516406042.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:03.161Z,1516406043.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:03.175Z,1516406043.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:03.559Z,1516406043.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:03.573Z,1516406043.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:03.962Z,1516406043.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:03.987Z,1516406043.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:04.354Z,1516406044.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:04.383Z,1516406044.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:04.767Z,1516406044.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:04.781Z,1516406044.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:05.165Z,1516406045.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:05.180Z,1516406045.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:05.559Z,1516406045.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:05.575Z,1516406045.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:05.970Z,1516406045.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:05.985Z,1516406045.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:06.361Z,1516406046.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:06.384Z,1516406046.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:06.759Z,1516406046.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:06.773Z,1516406046.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:07.158Z,1516406047.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:07.172Z,1516406047.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:07.565Z,1516406047.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:07.579Z,1516406047.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:07.966Z,1516406047.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:07.979Z,1516406047.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:08.365Z,1516406048.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:08.379Z,1516406048.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:08.762Z,1516406048.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:08.776Z,1516406048.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:09.154Z,1516406049.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:09.180Z,1516406049.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:09.558Z,1516406049.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:09.572Z,1516406049.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:09.957Z,1516406049.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:09.979Z,1516406049.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:10.357Z,1516406050.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:10.371Z,1516406050.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:10.765Z,1516406050.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:10.779Z,1516406050.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:11.161Z,1516406051.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:11.183Z,1516406051.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:11.555Z,1516406051.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:11.579Z,1516406051.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:11.966Z,1516406051.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:11.980Z,1516406051.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:12.365Z,1516406052.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:12.379Z,1516406052.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:12.756Z,1516406052.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:12.770Z,1516406052.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:13.166Z,1516406053.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:13.180Z,1516406053.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:13.561Z,1516406053.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:13.586Z,1516406053.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:13.951Z,1516406053.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:13.976Z,1516406053.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:14.366Z,1516406054.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:14.381Z,1516406054.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:14.762Z,1516406054.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:14.776Z,1516406054.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:15.152Z,1516406055.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:15.177Z,1516406055.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:15.566Z,1516406055.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:15.581Z,1516406055.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:15.963Z,1516406055.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:15.977Z,1516406055.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:16.352Z,1516406056.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:16.376Z,1516406056.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:16.751Z,1516406056.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:16.783Z,1516406056.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:17.151Z,1516406057.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:17.183Z,1516406057.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:17.548Z,1516406057.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:17.574Z,1516406057.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:17.968Z,1516406057.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:17.982Z,1516406057.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:18.358Z,1516406058.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:18.380Z,1516406058.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:18.752Z,1516406058.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:18.777Z,1516406058.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:19.166Z,1516406059.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:19.181Z,1516406059.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:19.550Z,1516406059.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:19.579Z,1516406059.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:19.966Z,1516406059.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:19.981Z,1516406059.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:20.366Z,1516406060.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:20.380Z,1516406060.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:20.762Z,1516406060.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:20.776Z,1516406060.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:21.152Z,1516406061.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:21.177Z,1516406061.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:21.550Z,1516406061.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:21.582Z,1516406061.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:21.951Z,1516406061.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:21.982Z,1516406061.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:22.348Z,1516406062.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:22.373Z,1516406062.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:22.765Z,1516406062.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:22.779Z,1516406062.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:23.158Z,1516406063.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:23.179Z,1516406063.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:23.552Z,1516406063.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:23.577Z,1516406063.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:23.963Z,1516406063.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:23.977Z,1516406063.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:24.350Z,1516406064.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:24.375Z,1516406064.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:24.752Z,1516406064.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:24.777Z,1516406064.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:25.166Z,1516406065.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:25.180Z,1516406065.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:25.566Z,1516406065.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:25.580Z,1516406065.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:25.955Z,1516406065.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:25.988Z,1516406065.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:26.359Z,1516406066.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:26.384Z,1516406066.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:26.750Z,1516406066.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:26.781Z,1516406066.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:27.148Z,1516406067.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:27.170Z,1516406067.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:27.555Z,1516406067.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:27.585Z,1516406067.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:27.959Z,1516406067.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:27.990Z,1516406067.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:28.350Z,1516406068.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:28.364Z,1516406068.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:28.756Z,1516406068.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:28.787Z,1516406068.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:29.172Z,1516406069.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:29.196Z,1516406069.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:29.548Z,1516406069.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:29.562Z,1516406069.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:29.954Z,1516406069.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:29.968Z,1516406069.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:30.363Z,1516406070.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:30.400Z,1516406070.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:30.749Z,1516406070.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:30.763Z,1516406070.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:31.163Z,1516406071.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:31.193Z,1516406071.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:31.560Z,1516406071.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:31.574Z,1516406071.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:31.963Z,1516406071.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:31.977Z,1516406071.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:32.355Z,1516406072.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:32.375Z,1516406072.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:32.759Z,1516406072.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:32.773Z,1516406072.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:33.155Z,1516406073.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:33.169Z,1516406073.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:33.559Z,1516406073.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:33.579Z,1516406073.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:33.963Z,1516406073.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:33.977Z,1516406073.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:34.355Z,1516406074.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:34.369Z,1516406074.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:34.759Z,1516406074.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:34.774Z,1516406074.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:35.167Z,1516406075.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:35.181Z,1516406075.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:35.564Z,1516406075.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:35.577Z,1516406075.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:35.979Z,1516406075.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:36.032Z,1516406076.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:36.364Z,1516406076.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:36.383Z,1516406076.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:36.756Z,1516406076.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:36.770Z,1516406076.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:37.165Z,1516406077.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:37.179Z,1516406077.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:40.254Z,1516406080.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:40.268Z,1516406080.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:40.363Z,1516406080.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:40.403Z,1516406080.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:40.723Z,1516406080.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:40.759Z,1516406080.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:41.123Z,1516406081.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:41.138Z,1516406081.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:41.514Z,1516406081.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:41.528Z,1516406081.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:41.926Z,1516406081.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:41.961Z,1516406081.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:42.322Z,1516406082.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:42.336Z,1516406082.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:42.715Z,1516406082.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:42.729Z,1516406082.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:43.119Z,1516406083.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:43.132Z,1516406083.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:43.523Z,1516406083.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:43.536Z,1516406083.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:43.923Z,1516406083.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:43.937Z,1516406083.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:44.320Z,1516406084.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:44.334Z,1516406084.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:44.717Z,1516406084.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:44.731Z,1516406084.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:45.117Z,1516406085.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:45.131Z,1516406085.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:45.520Z,1516406085.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:45.534Z,1516406085.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:45.921Z,1516406085.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:45.935Z,1516406085.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:46.315Z,1516406086.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:46.330Z,1516406086.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:46.720Z,1516406086.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:46.735Z,1516406086.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:47.124Z,1516406087.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:47.138Z,1516406087.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:47.519Z,1516406087.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:47.533Z,1516406087.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:47.923Z,1516406087.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:47.937Z,1516406087.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:48.320Z,1516406088.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:48.334Z,1516406088.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:48.719Z,1516406088.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:48.733Z,1516406088.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:49.120Z,1516406089.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:49.134Z,1516406089.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:49.520Z,1516406089.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:49.534Z,1516406089.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:49.920Z,1516406089.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:49.935Z,1516406089.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:50.317Z,1516406090.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:50.331Z,1516406090.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:50.717Z,1516406090.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:50.743Z,1516406090.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:51.124Z,1516406091.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:51.138Z,1516406091.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:51.524Z,1516406091.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:51.538Z,1516406091.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:51.924Z,1516406091.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:51.937Z,1516406091.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:52.319Z,1516406092.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:52.334Z,1516406092.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:52.723Z,1516406092.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:52.737Z,1516406092.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:53.123Z,1516406093.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:53.138Z,1516406093.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:53.519Z,1516406093.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:53.533Z,1516406093.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:53.917Z,1516406093.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:53.947Z,1516406093.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:54.323Z,1516406094.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:54.337Z,1516406094.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:54.719Z,1516406094.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:54.733Z,1516406094.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:55.123Z,1516406095.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:55.137Z,1516406095.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:55.523Z,1516406095.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:55.537Z,1516406095.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:55.923Z,1516406095.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:55.938Z,1516406095.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:56.322Z,1516406096.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:56.336Z,1516406096.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:56.717Z,1516406096.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:56.731Z,1516406096.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:57.125Z,1516406097.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:57.139Z,1516406097.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:57.525Z,1516406097.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:57.538Z,1516406097.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:57.925Z,1516406097.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:57.939Z,1516406097.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:58.319Z,1516406098.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:58.333Z,1516406098.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:58.718Z,1516406098.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:58.745Z,1516406098.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:59.118Z,1516406099.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:59.132Z,1516406099.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:59.515Z,1516406099.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:59.529Z,1516406099.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:54:59.921Z,1516406099.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:54:59.938Z,1516406099.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:00.325Z,1516406100.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:00.339Z,1516406100.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:00.719Z,1516406100.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:00.734Z,1516406100.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:01.117Z,1516406101.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:01.147Z,1516406101.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:01.526Z,1516406101.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:01.539Z,1516406101.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:01.925Z,1516406101.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:01.939Z,1516406101.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:02.325Z,1516406102.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:02.339Z,1516406102.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:02.726Z,1516406102.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:02.740Z,1516406102.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:03.125Z,1516406103.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:03.139Z,1516406103.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:03.521Z,1516406103.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:03.542Z,1516406103.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:03.921Z,1516406103.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:03.943Z,1516406103.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:04.315Z,1516406104.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:04.329Z,1516406104.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:04.722Z,1516406104.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:04.735Z,1516406104.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:05.126Z,1516406105.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:05.140Z,1516406105.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:05.516Z,1516406105.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:05.530Z,1516406105.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:05.918Z,1516406105.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:05.945Z,1516406105.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:06.321Z,1516406106.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:06.343Z,1516406106.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:06.719Z,1516406106.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:06.733Z,1516406106.733 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:06.734Z,1516406106.734 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-01-19T23:55:06.734Z,1516406106.734 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:55:06.735Z,1516406106.735 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:06.735Z,1516406106.735 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-01-19T23:55:06.736Z,1516406106.736 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:55:06.737Z,1516406106.737 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:06.738Z,1516406106.738 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55
2018-01-19T23:55:06.738Z,1516406106.738 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:55:06.749Z,1516406106.749 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:55:06.749Z,1516406106.749 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:55:06.750Z,1516406106.750 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:55:06.750Z,1516406106.750 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-19T23:55:06.750Z,1516406106.750 [NAL9602] No Fault, FailCount= 5
2018-01-19T23:55:07.098Z,1516406107.098 [NAL9602](INFO): Powering up NAL9602
2018-01-19T23:55:07.125Z,1516406107.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:07.158Z,1516406107.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:55:07.158Z,1516406107.158 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-01-19T23:55:07.158Z,1516406107.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:55:07.158Z,1516406107.158 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-01-19T23:55:07.159Z,1516406107.159 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:55:07.159Z,1516406107.159 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55
2018-01-19T23:55:07.522Z,1516406107.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:07.535Z,1516406107.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:55:07.535Z,1516406107.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:55:07.536Z,1516406107.536 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:55:07.536Z,1516406107.536 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:55:07.536Z,1516406107.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:55:07.537Z,1516406107.537 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:55:07.537Z,1516406107.537 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:55:07.538Z,1516406107.538 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:55:07.538Z,1516406107.538 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:55:07.923Z,1516406107.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:07.937Z,1516406107.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:55:07.938Z,1516406107.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:08.326Z,1516406108.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:08.340Z,1516406108.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:55:08.341Z,1516406108.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:08.726Z,1516406108.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:08.745Z,1516406108.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:55:08.746Z,1516406108.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:09.111Z,1516406109.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:09.142Z,1516406109.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:55:09.143Z,1516406109.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:09.511Z,1516406109.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:09.538Z,1516406109.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:55:09.539Z,1516406109.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:09.927Z,1516406109.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:09.947Z,1516406109.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:55:09.948Z,1516406109.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:10.327Z,1516406110.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:10.340Z,1516406110.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:55:10.341Z,1516406110.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:10.715Z,1516406110.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:10.746Z,1516406110.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:55:10.747Z,1516406110.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:11.127Z,1516406111.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:11.146Z,1516406111.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:55:11.147Z,1516406111.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:11.527Z,1516406111.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:11.540Z,1516406111.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:55:11.541Z,1516406111.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:11.911Z,1516406111.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:11.941Z,1516406111.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:55:11.942Z,1516406111.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:12.326Z,1516406112.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:12.345Z,1516406112.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:55:12.346Z,1516406112.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:12.711Z,1516406112.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:12.742Z,1516406112.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:55:12.743Z,1516406112.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:13.114Z,1516406113.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:13.142Z,1516406113.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:55:13.143Z,1516406113.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:13.527Z,1516406113.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:13.541Z,1516406113.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:55:13.542Z,1516406113.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:13.911Z,1516406113.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:13.943Z,1516406113.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:55:13.944Z,1516406113.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:14.310Z,1516406114.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:14.343Z,1516406114.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:55:14.344Z,1516406114.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:14.727Z,1516406114.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:14.741Z,1516406114.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:55:14.742Z,1516406114.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:15.111Z,1516406115.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:15.147Z,1516406115.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:55:15.148Z,1516406115.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:15.527Z,1516406115.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:15.541Z,1516406115.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:55:15.542Z,1516406115.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:15.916Z,1516406115.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:15.943Z,1516406115.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:55:15.944Z,1516406115.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:16.331Z,1516406116.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:16.345Z,1516406116.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:55:16.346Z,1516406116.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:16.716Z,1516406116.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:16.741Z,1516406116.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:55:16.742Z,1516406116.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:17.130Z,1516406117.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:17.144Z,1516406117.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:55:17.145Z,1516406117.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:17.532Z,1516406117.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:17.546Z,1516406117.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:55:17.546Z,1516406117.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:17.898Z,1516406117.898 [NAL9602](INFO): NAL9602 initialized
2018-01-19T23:55:17.925Z,1516406117.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:17.947Z,1516406117.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:55:17.948Z,1516406117.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:18.311Z,1516406118.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:18.350Z,1516406118.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:55:18.351Z,1516406118.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:18.741Z,1516406118.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:18.755Z,1516406118.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:55:18.756Z,1516406118.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:19.140Z,1516406119.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:19.154Z,1516406119.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:55:19.155Z,1516406119.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:19.521Z,1516406119.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:19.561Z,1516406119.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:55:19.562Z,1516406119.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:19.919Z,1516406119.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:19.947Z,1516406119.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:55:19.948Z,1516406119.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:20.315Z,1516406120.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:20.349Z,1516406120.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:55:20.350Z,1516406120.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:20.721Z,1516406120.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:20.757Z,1516406120.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:55:20.758Z,1516406120.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:21.121Z,1516406121.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:21.144Z,1516406121.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:55:21.149Z,1516406121.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:21.530Z,1516406121.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:21.557Z,1516406121.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:55:21.558Z,1516406121.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:21.930Z,1516406121.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:21.969Z,1516406121.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:55:21.970Z,1516406121.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:22.330Z,1516406122.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:22.357Z,1516406122.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:55:22.358Z,1516406122.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:22.724Z,1516406122.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:22.754Z,1516406122.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:55:22.755Z,1516406122.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:23.123Z,1516406123.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:23.136Z,1516406123.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:55:23.137Z,1516406123.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:23.534Z,1516406123.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:23.564Z,1516406123.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:55:23.569Z,1516406123.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:23.934Z,1516406123.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:23.948Z,1516406123.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:55:23.965Z,1516406123.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:24.338Z,1516406124.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:24.351Z,1516406124.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:55:24.352Z,1516406124.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:24.728Z,1516406124.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:24.742Z,1516406124.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:55:24.743Z,1516406124.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:25.127Z,1516406125.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:25.141Z,1516406125.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:55:25.142Z,1516406125.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:25.529Z,1516406125.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:25.542Z,1516406125.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T23:55:25.543Z,1516406125.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:25.934Z,1516406125.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:25.983Z,1516406125.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-19T23:55:25.984Z,1516406125.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:26.330Z,1516406126.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:26.343Z,1516406126.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:55:26.344Z,1516406126.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:26.724Z,1516406126.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:26.738Z,1516406126.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:27.128Z,1516406127.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:27.142Z,1516406127.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:27.529Z,1516406127.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:27.543Z,1516406127.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:27.929Z,1516406127.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:27.943Z,1516406127.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:28.330Z,1516406128.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:28.344Z,1516406128.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:28.722Z,1516406128.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:28.741Z,1516406128.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:29.123Z,1516406129.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:29.136Z,1516406129.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:29.530Z,1516406129.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:29.545Z,1516406129.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:29.934Z,1516406129.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:29.949Z,1516406129.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:30.330Z,1516406130.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:30.351Z,1516406130.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:30.722Z,1516406130.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:30.736Z,1516406130.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:31.127Z,1516406131.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:31.147Z,1516406131.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:31.525Z,1516406131.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:31.539Z,1516406131.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:31.930Z,1516406131.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:31.945Z,1516406131.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:32.330Z,1516406132.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:32.344Z,1516406132.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:32.728Z,1516406132.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:32.742Z,1516406132.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:33.127Z,1516406133.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:33.142Z,1516406133.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:33.523Z,1516406133.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:33.537Z,1516406133.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:33.923Z,1516406133.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:33.937Z,1516406133.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:34.327Z,1516406134.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:34.342Z,1516406134.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:34.728Z,1516406134.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:34.747Z,1516406134.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:35.130Z,1516406135.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:35.144Z,1516406135.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:35.530Z,1516406135.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:35.551Z,1516406135.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:35.927Z,1516406135.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:35.942Z,1516406135.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:36.326Z,1516406136.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:36.340Z,1516406136.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:36.727Z,1516406136.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:36.742Z,1516406136.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:37.123Z,1516406137.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:37.137Z,1516406137.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:37.528Z,1516406137.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:37.542Z,1516406137.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:40.630Z,1516406140.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:40.645Z,1516406140.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:40.768Z,1516406140.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:40.803Z,1516406140.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:41.111Z,1516406141.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:41.136Z,1516406141.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:41.524Z,1516406141.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:41.539Z,1516406141.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:41.912Z,1516406141.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:41.937Z,1516406141.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:42.323Z,1516406142.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:42.343Z,1516406142.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:42.731Z,1516406142.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:42.745Z,1516406142.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:43.134Z,1516406143.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:43.148Z,1516406143.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:43.530Z,1516406143.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:43.544Z,1516406143.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:43.907Z,1516406143.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:43.935Z,1516406143.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:44.305Z,1516406144.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:44.339Z,1516406144.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:44.707Z,1516406144.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:44.732Z,1516406144.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:45.108Z,1516406145.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:45.144Z,1516406145.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:45.501Z,1516406145.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:45.523Z,1516406145.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:45.930Z,1516406145.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:45.944Z,1516406145.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:46.328Z,1516406146.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:46.348Z,1516406146.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:46.726Z,1516406146.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:46.740Z,1516406146.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:47.107Z,1516406147.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:47.138Z,1516406147.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:47.508Z,1516406147.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:47.539Z,1516406147.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:47.912Z,1516406147.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:47.942Z,1516406147.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:48.311Z,1516406148.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:48.343Z,1516406148.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:48.731Z,1516406148.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:48.746Z,1516406148.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:49.118Z,1516406149.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:49.150Z,1516406149.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:49.530Z,1516406149.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:49.544Z,1516406149.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:49.907Z,1516406149.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:49.939Z,1516406149.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:50.307Z,1516406150.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:50.343Z,1516406150.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:50.711Z,1516406150.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:50.751Z,1516406150.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:51.116Z,1516406151.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:51.131Z,1516406151.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:51.515Z,1516406151.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:51.535Z,1516406151.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:51.926Z,1516406151.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:51.956Z,1516406151.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:52.326Z,1516406152.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:52.340Z,1516406152.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:52.730Z,1516406152.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:52.744Z,1516406152.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:53.120Z,1516406153.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:53.134Z,1516406153.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:53.521Z,1516406153.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:53.539Z,1516406153.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:53.920Z,1516406153.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:53.939Z,1516406153.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:54.319Z,1516406154.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:54.339Z,1516406154.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:54.723Z,1516406154.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:54.737Z,1516406154.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:55.122Z,1516406155.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:55.136Z,1516406155.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:55.526Z,1516406155.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:55.540Z,1516406155.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:55.920Z,1516406155.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:55.935Z,1516406155.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:56.317Z,1516406156.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:56.331Z,1516406156.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:56.720Z,1516406156.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:56.739Z,1516406156.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:57.121Z,1516406157.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:57.136Z,1516406157.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:57.516Z,1516406157.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:57.531Z,1516406157.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:57.923Z,1516406157.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:57.938Z,1516406157.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:58.326Z,1516406158.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:58.341Z,1516406158.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:58.723Z,1516406158.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:58.738Z,1516406158.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:59.115Z,1516406159.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:59.131Z,1516406159.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:59.516Z,1516406159.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:59.530Z,1516406159.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:55:59.910Z,1516406159.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:55:59.929Z,1516406159.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:00.315Z,1516406160.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:00.330Z,1516406160.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:00.722Z,1516406160.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:00.736Z,1516406160.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:01.121Z,1516406161.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:01.135Z,1516406161.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:01.521Z,1516406161.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:01.543Z,1516406161.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:01.920Z,1516406161.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:01.934Z,1516406161.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:02.316Z,1516406162.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:02.330Z,1516406162.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:02.719Z,1516406162.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:02.734Z,1516406162.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:03.121Z,1516406163.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:03.134Z,1516406163.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:03.520Z,1516406163.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:03.534Z,1516406163.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:03.923Z,1516406163.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:03.937Z,1516406163.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:04.326Z,1516406164.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:04.340Z,1516406164.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:04.723Z,1516406164.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:04.737Z,1516406164.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:05.115Z,1516406165.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:05.135Z,1516406165.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:05.512Z,1516406165.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:05.526Z,1516406165.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:05.919Z,1516406165.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:05.939Z,1516406165.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:06.318Z,1516406166.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:06.333Z,1516406166.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:06.721Z,1516406166.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:06.739Z,1516406166.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:07.126Z,1516406167.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:07.141Z,1516406167.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:07.522Z,1516406167.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:07.536Z,1516406167.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:07.919Z,1516406167.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:07.933Z,1516406167.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:08.319Z,1516406168.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:08.333Z,1516406168.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:08.719Z,1516406168.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:08.733Z,1516406168.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:09.117Z,1516406169.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:09.130Z,1516406169.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:09.519Z,1516406169.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:09.534Z,1516406169.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:09.922Z,1516406169.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:09.936Z,1516406169.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:10.321Z,1516406170.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:10.343Z,1516406170.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:10.720Z,1516406170.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:10.739Z,1516406170.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:11.115Z,1516406171.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:11.135Z,1516406171.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:11.520Z,1516406171.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:11.533Z,1516406171.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:11.919Z,1516406171.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:11.939Z,1516406171.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:12.318Z,1516406172.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:12.332Z,1516406172.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:12.721Z,1516406172.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:12.742Z,1516406172.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:13.126Z,1516406173.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:13.140Z,1516406173.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:13.519Z,1516406173.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:13.539Z,1516406173.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:13.919Z,1516406173.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:13.933Z,1516406173.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:14.319Z,1516406174.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:14.333Z,1516406174.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:14.715Z,1516406174.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:14.729Z,1516406174.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:15.112Z,1516406175.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:15.126Z,1516406175.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:15.519Z,1516406175.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:15.533Z,1516406175.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:15.920Z,1516406175.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:15.939Z,1516406175.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:16.326Z,1516406176.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:16.339Z,1516406176.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:16.722Z,1516406176.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:16.736Z,1516406176.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:17.119Z,1516406177.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:17.133Z,1516406177.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:17.516Z,1516406177.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:17.530Z,1516406177.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:17.919Z,1516406177.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:17.939Z,1516406177.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:18.318Z,1516406178.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:18.333Z,1516406178.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:18.721Z,1516406178.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:18.735Z,1516406178.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:19.126Z,1516406179.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:19.140Z,1516406179.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:19.519Z,1516406179.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:19.535Z,1516406179.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:19.919Z,1516406179.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:19.933Z,1516406179.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:20.319Z,1516406180.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:20.333Z,1516406180.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:20.715Z,1516406180.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:20.729Z,1516406180.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:21.116Z,1516406181.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:21.130Z,1516406181.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:21.519Z,1516406181.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:21.533Z,1516406181.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:21.922Z,1516406181.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:21.936Z,1516406181.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:22.326Z,1516406182.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:22.339Z,1516406182.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:22.722Z,1516406182.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:22.736Z,1516406182.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:23.119Z,1516406183.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:23.133Z,1516406183.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:23.519Z,1516406183.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:23.533Z,1516406183.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:23.919Z,1516406183.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:23.939Z,1516406183.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:24.318Z,1516406184.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:24.332Z,1516406184.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:24.722Z,1516406184.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:24.736Z,1516406184.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:25.126Z,1516406185.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:25.140Z,1516406185.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:25.522Z,1516406185.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:25.536Z,1516406185.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:25.916Z,1516406185.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:25.930Z,1516406185.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:26.310Z,1516406186.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:26.338Z,1516406186.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:26.715Z,1516406186.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:26.730Z,1516406186.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:27.119Z,1516406187.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:27.133Z,1516406187.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:27.519Z,1516406187.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:27.533Z,1516406187.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:27.922Z,1516406187.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:27.936Z,1516406187.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:28.322Z,1516406188.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:28.335Z,1516406188.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:28.722Z,1516406188.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:28.737Z,1516406188.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:29.119Z,1516406189.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:29.133Z,1516406189.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:29.519Z,1516406189.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:29.533Z,1516406189.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:29.921Z,1516406189.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:29.935Z,1516406189.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:30.321Z,1516406190.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:30.335Z,1516406190.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:30.722Z,1516406190.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:30.736Z,1516406190.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:31.122Z,1516406191.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:31.136Z,1516406191.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:31.526Z,1516406191.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:31.540Z,1516406191.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:31.919Z,1516406191.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:31.933Z,1516406191.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:32.313Z,1516406192.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:32.331Z,1516406192.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:32.714Z,1516406192.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:32.736Z,1516406192.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:33.124Z,1516406193.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:33.138Z,1516406193.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:33.504Z,1516406193.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:33.534Z,1516406193.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:33.930Z,1516406193.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:33.945Z,1516406193.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:34.334Z,1516406194.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:34.348Z,1516406194.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:34.724Z,1516406194.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:34.742Z,1516406194.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:35.111Z,1516406195.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:35.138Z,1516406195.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:35.508Z,1516406195.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:35.541Z,1516406195.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:35.913Z,1516406195.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:35.940Z,1516406195.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:36.311Z,1516406196.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:36.337Z,1516406196.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:36.735Z,1516406196.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:36.748Z,1516406196.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:37.136Z,1516406197.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:37.155Z,1516406197.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:37.531Z,1516406197.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:37.546Z,1516406197.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:37.911Z,1516406197.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:37.949Z,1516406197.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:41.002Z,1516406201.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:41.017Z,1516406201.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:41.132Z,1516406201.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:41.146Z,1516406201.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:41.497Z,1516406201.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:41.537Z,1516406201.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:41.901Z,1516406201.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:41.907Z,1516406201.907 [PNI_TCM](ERROR): CRC does not match. Expected:0x31234 got:0x16662
2018-01-19T23:56:41.945Z,1516406201.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:42.301Z,1516406202.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:42.315Z,1516406202.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:42.694Z,1516406202.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:42.739Z,1516406202.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:43.096Z,1516406203.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:43.114Z,1516406203.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:43.497Z,1516406203.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:43.513Z,1516406203.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:43.899Z,1516406203.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:43.914Z,1516406203.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:44.297Z,1516406204.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:44.338Z,1516406204.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:44.698Z,1516406204.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:44.716Z,1516406204.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:45.096Z,1516406205.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:45.113Z,1516406205.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:45.497Z,1516406205.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:45.511Z,1516406205.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:45.886Z,1516406205.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:45.922Z,1516406205.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:46.295Z,1516406206.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:46.312Z,1516406206.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:46.699Z,1516406206.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:46.716Z,1516406206.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:47.104Z,1516406207.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:47.119Z,1516406207.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:47.497Z,1516406207.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:47.537Z,1516406207.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:47.896Z,1516406207.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:47.911Z,1516406207.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:48.295Z,1516406208.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:48.313Z,1516406208.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:48.699Z,1516406208.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:48.714Z,1516406208.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:49.097Z,1516406209.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:49.139Z,1516406209.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:49.498Z,1516406209.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:49.514Z,1516406209.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:49.890Z,1516406209.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:49.912Z,1516406209.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:50.289Z,1516406210.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:50.306Z,1516406210.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:50.700Z,1516406210.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:50.719Z,1516406210.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:51.099Z,1516406211.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:51.123Z,1516406211.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:51.501Z,1516406211.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:51.519Z,1516406211.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:51.898Z,1516406211.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:51.914Z,1516406211.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:52.291Z,1516406212.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:52.323Z,1516406212.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:52.701Z,1516406212.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:52.715Z,1516406212.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:53.102Z,1516406213.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:53.120Z,1516406213.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:53.502Z,1516406213.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:53.518Z,1516406213.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:53.897Z,1516406213.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:53.923Z,1516406213.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:54.293Z,1516406214.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:54.307Z,1516406214.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:54.701Z,1516406214.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:54.719Z,1516406214.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:55.102Z,1516406215.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:55.126Z,1516406215.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:55.501Z,1516406215.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:55.544Z,1516406215.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:55.896Z,1516406215.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:55.910Z,1516406215.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:56.278Z,1516406216.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:56.314Z,1516406216.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:56.702Z,1516406216.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:56.719Z,1516406216.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:57.105Z,1516406217.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:57.119Z,1516406217.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:57.496Z,1516406217.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:57.510Z,1516406217.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:57.884Z,1516406217.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:57.910Z,1516406217.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:58.283Z,1516406218.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:58.320Z,1516406218.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:58.707Z,1516406218.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:58.721Z,1516406218.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:59.108Z,1516406219.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:59.128Z,1516406219.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:59.506Z,1516406219.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:59.523Z,1516406219.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:56:59.897Z,1516406219.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:56:59.914Z,1516406219.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:00.283Z,1516406220.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:00.314Z,1516406220.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:00.705Z,1516406220.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:00.727Z,1516406220.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:01.110Z,1516406221.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:01.128Z,1516406221.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:01.506Z,1516406221.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:01.524Z,1516406221.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:01.884Z,1516406221.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:01.914Z,1516406221.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:02.285Z,1516406222.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:02.314Z,1516406222.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:02.706Z,1516406222.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:02.720Z,1516406222.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:03.106Z,1516406223.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:03.124Z,1516406223.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:03.490Z,1516406223.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:03.516Z,1516406223.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:03.888Z,1516406223.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:03.913Z,1516406223.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:04.283Z,1516406224.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:04.314Z,1516406224.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:04.690Z,1516406224.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:04.725Z,1516406224.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:05.098Z,1516406225.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:05.127Z,1516406225.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:05.498Z,1516406225.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:05.527Z,1516406225.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:05.889Z,1516406225.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:05.911Z,1516406225.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:06.287Z,1516406226.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:06.328Z,1516406226.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:06.698Z,1516406226.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:06.728Z,1516406226.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:07.102Z,1516406227.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:07.134Z,1516406227.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:07.502Z,1516406227.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:07.534Z,1516406227.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:07.894Z,1516406227.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:07.908Z,1516406227.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:08.293Z,1516406228.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:08.307Z,1516406228.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:08.690Z,1516406228.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:08.704Z,1516406228.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:09.110Z,1516406229.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:09.136Z,1516406229.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:09.491Z,1516406229.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:09.510Z,1516406229.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:09.891Z,1516406229.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:09.905Z,1516406229.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:10.294Z,1516406230.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:10.308Z,1516406230.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:10.695Z,1516406230.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:10.709Z,1516406230.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:11.107Z,1516406231.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:11.138Z,1516406231.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:11.507Z,1516406231.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:11.535Z,1516406231.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:11.894Z,1516406231.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:11.909Z,1516406231.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:12.289Z,1516406232.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:12.304Z,1516406232.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:12.694Z,1516406232.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:12.709Z,1516406232.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:13.106Z,1516406233.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:13.137Z,1516406233.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:13.494Z,1516406233.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:13.508Z,1516406233.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:13.894Z,1516406233.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:13.908Z,1516406233.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:14.291Z,1516406234.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:14.306Z,1516406234.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:14.694Z,1516406234.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:14.708Z,1516406234.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:15.099Z,1516406235.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:15.113Z,1516406235.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:15.498Z,1516406235.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:15.512Z,1516406235.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:15.896Z,1516406235.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:15.911Z,1516406235.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:16.291Z,1516406236.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:16.306Z,1516406236.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:16.698Z,1516406236.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:16.712Z,1516406236.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:17.097Z,1516406237.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:17.111Z,1516406237.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:17.498Z,1516406237.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:17.512Z,1516406237.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:17.893Z,1516406237.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:17.907Z,1516406237.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:18.289Z,1516406238.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:18.303Z,1516406238.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:18.698Z,1516406238.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:18.712Z,1516406238.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:19.101Z,1516406239.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:19.115Z,1516406239.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:19.495Z,1516406239.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:19.513Z,1516406239.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:19.897Z,1516406239.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:19.911Z,1516406239.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:20.279Z,1516406240.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:20.315Z,1516406240.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:20.702Z,1516406240.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:20.717Z,1516406240.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:21.106Z,1516406241.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:21.120Z,1516406241.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:21.496Z,1516406241.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:21.521Z,1516406241.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:21.885Z,1516406241.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:21.912Z,1516406241.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:22.296Z,1516406242.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:22.311Z,1516406242.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:22.679Z,1516406242.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:22.707Z,1516406242.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:23.106Z,1516406243.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:23.120Z,1516406243.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:23.506Z,1516406243.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:23.520Z,1516406243.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:23.896Z,1516406243.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:23.925Z,1516406243.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:24.277Z,1516406244.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:24.299Z,1516406244.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:24.687Z,1516406244.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:24.712Z,1516406244.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:25.080Z,1516406245.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:25.111Z,1516406245.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:25.477Z,1516406245.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:25.499Z,1516406245.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:25.906Z,1516406245.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:25.920Z,1516406245.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:26.303Z,1516406246.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:26.317Z,1516406246.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:26.698Z,1516406246.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:26.719Z,1516406246.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:27.083Z,1516406247.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:27.118Z,1516406247.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:27.479Z,1516406247.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:27.516Z,1516406247.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:27.887Z,1516406247.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:27.912Z,1516406247.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:28.284Z,1516406248.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:28.306Z,1516406248.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:28.687Z,1516406248.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:28.719Z,1516406248.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:29.106Z,1516406249.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:29.120Z,1516406249.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:29.502Z,1516406249.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:29.523Z,1516406249.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:29.890Z,1516406249.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:29.916Z,1516406249.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:30.281Z,1516406250.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:30.295Z,1516406250.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:30.683Z,1516406250.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:30.719Z,1516406250.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:31.088Z,1516406251.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:31.102Z,1516406251.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:31.478Z,1516406251.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:31.492Z,1516406251.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:31.902Z,1516406251.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:31.928Z,1516406251.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:32.313Z,1516406252.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:32.327Z,1516406252.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:32.690Z,1516406252.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:32.704Z,1516406252.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:33.091Z,1516406253.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:33.126Z,1516406253.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:33.491Z,1516406253.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:33.505Z,1516406253.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:33.892Z,1516406253.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:33.911Z,1516406253.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:34.291Z,1516406254.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:34.305Z,1516406254.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:34.687Z,1516406254.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:34.703Z,1516406254.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:35.102Z,1516406255.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:35.134Z,1516406255.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:35.502Z,1516406255.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:35.516Z,1516406255.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:35.906Z,1516406255.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:35.939Z,1516406255.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:36.288Z,1516406256.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:36.302Z,1516406256.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:36.689Z,1516406256.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:36.703Z,1516406256.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:36.710Z,1516406256.710 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-19T23:57:36.711Z,1516406256.711 [Default:CheckIn:C.Wait] Stopped
2018-01-19T23:57:36.711Z,1516406256.711 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-19T23:57:36.711Z,1516406256.711 [Default:CheckIn:D] Running Loop=1
2018-01-19T23:57:37.089Z,1516406257.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:37.102Z,1516406257.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:37.105Z,1516406257.105 [Default:CheckIn:D] Stopped
2018-01-19T23:57:37.105Z,1516406257.105 [Default:CheckIn:E] Running Loop=1
2018-01-19T23:57:37.488Z,1516406257.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:37.506Z,1516406257.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:37.509Z,1516406257.509 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 164.818001 min 
2018-01-19T23:57:37.509Z,1516406257.509 [Default:CheckIn:E] Stopped
2018-01-19T23:57:37.509Z,1516406257.509 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-19T23:57:37.510Z,1516406257.510 [Default:CheckIn] Stopped
2018-01-19T23:57:37.510Z,1516406257.510 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-19T23:57:37.510Z,1516406257.510 [Default:CheckIn](INFO): Running loop #17
2018-01-19T23:57:37.510Z,1516406257.510 [Default:CheckIn] Running Loop=17
2018-01-19T23:57:37.510Z,1516406257.510 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-19T23:57:37.510Z,1516406257.510 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-19T23:57:37.901Z,1516406257.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:37.916Z,1516406257.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:38.301Z,1516406258.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:38.322Z,1516406258.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:41.388Z,1516406261.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:41.403Z,1516406261.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:41.504Z,1516406261.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:41.550Z,1516406261.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:41.863Z,1516406261.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:41.896Z,1516406261.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:42.264Z,1516406262.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:42.300Z,1516406262.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:42.663Z,1516406262.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:42.696Z,1516406262.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:43.070Z,1516406263.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:43.093Z,1516406263.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:43.470Z,1516406263.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:43.495Z,1516406263.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:43.858Z,1516406263.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:43.872Z,1516406263.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:44.259Z,1516406264.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:44.295Z,1516406264.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:44.659Z,1516406264.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:44.673Z,1516406264.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:45.088Z,1516406265.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:45.103Z,1516406265.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:45.457Z,1516406265.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:45.472Z,1516406265.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:45.870Z,1516406265.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:45.903Z,1516406265.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:46.259Z,1516406266.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:46.273Z,1516406266.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:46.671Z,1516406266.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:46.700Z,1516406266.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:47.060Z,1516406267.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:47.074Z,1516406267.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:47.447Z,1516406267.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:47.473Z,1516406267.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:47.861Z,1516406267.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:47.876Z,1516406267.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:48.258Z,1516406268.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:48.272Z,1516406268.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:48.658Z,1516406268.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:48.672Z,1516406268.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:49.074Z,1516406269.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:49.107Z,1516406269.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:49.463Z,1516406269.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:49.476Z,1516406269.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:49.863Z,1516406269.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:49.877Z,1516406269.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:50.262Z,1516406270.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:50.276Z,1516406270.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:50.656Z,1516406270.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:50.671Z,1516406270.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:51.054Z,1516406271.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:51.074Z,1516406271.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:51.461Z,1516406271.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:51.476Z,1516406271.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:51.862Z,1516406271.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:51.879Z,1516406271.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:52.274Z,1516406272.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:52.307Z,1516406272.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:52.674Z,1516406272.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:52.707Z,1516406272.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:53.061Z,1516406273.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:53.082Z,1516406273.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:53.454Z,1516406273.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:53.468Z,1516406273.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:53.855Z,1516406273.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:53.883Z,1516406273.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:54.266Z,1516406274.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:54.279Z,1516406274.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:54.657Z,1516406274.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:54.671Z,1516406274.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:55.069Z,1516406275.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:55.083Z,1516406275.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:55.470Z,1516406275.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:55.483Z,1516406275.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:55.865Z,1516406275.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:55.887Z,1516406275.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:56.259Z,1516406276.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:56.273Z,1516406276.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:56.656Z,1516406276.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:56.674Z,1516406276.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:57.064Z,1516406277.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:57.078Z,1516406277.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:57.459Z,1516406277.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:57.473Z,1516406277.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:57.866Z,1516406277.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:57.880Z,1516406277.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:58.270Z,1516406278.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:58.284Z,1516406278.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:58.668Z,1516406278.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:58.687Z,1516406278.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:59.064Z,1516406279.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:59.078Z,1516406279.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:59.457Z,1516406279.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:59.471Z,1516406279.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:57:59.859Z,1516406279.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:57:59.873Z,1516406279.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:00.265Z,1516406280.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:00.278Z,1516406280.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:00.657Z,1516406280.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:00.671Z,1516406280.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:01.067Z,1516406281.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:01.089Z,1516406281.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:01.471Z,1516406281.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:01.484Z,1516406281.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:01.862Z,1516406281.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:01.894Z,1516406281.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:02.264Z,1516406282.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:02.286Z,1516406282.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:02.647Z,1516406282.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:02.682Z,1516406282.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:03.064Z,1516406283.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:03.078Z,1516406283.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:03.454Z,1516406283.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:03.476Z,1516406283.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:03.866Z,1516406283.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:03.880Z,1516406283.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:04.272Z,1516406284.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:04.291Z,1516406284.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:04.670Z,1516406284.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:04.684Z,1516406284.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:05.063Z,1516406285.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:05.077Z,1516406285.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:05.457Z,1516406285.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:05.479Z,1516406285.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:05.862Z,1516406285.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:05.880Z,1516406285.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:06.248Z,1516406286.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:06.275Z,1516406286.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:06.649Z,1516406286.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:06.679Z,1516406286.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:07.070Z,1516406287.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:07.084Z,1516406287.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:07.470Z,1516406287.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:07.484Z,1516406287.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:07.874Z,1516406287.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:07.888Z,1516406287.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:07.888Z,1516406287.888 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-01-19T23:58:07.888Z,1516406287.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-19T23:58:07.890Z,1516406287.890 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:07.890Z,1516406287.890 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-01-19T23:58:07.890Z,1516406287.890 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-19T23:58:07.892Z,1516406287.892 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:07.892Z,1516406287.892 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 56
2018-01-19T23:58:07.892Z,1516406287.892 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-19T23:58:07.904Z,1516406287.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-19T23:58:07.904Z,1516406287.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-19T23:58:07.905Z,1516406287.905 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-19T23:58:08.270Z,1516406288.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:08.299Z,1516406288.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-19T23:58:08.299Z,1516406288.299 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-01-19T23:58:08.299Z,1516406288.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-19T23:58:08.299Z,1516406288.299 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-01-19T23:58:08.300Z,1516406288.300 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-19T23:58:08.300Z,1516406288.300 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 56
2018-01-19T23:58:08.647Z,1516406288.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:08.682Z,1516406288.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-19T23:58:08.682Z,1516406288.682 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:58:08.683Z,1516406288.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:58:08.683Z,1516406288.683 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-19T23:58:08.683Z,1516406288.683 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:58:08.684Z,1516406288.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:58:08.684Z,1516406288.684 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-19T23:58:08.685Z,1516406288.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-19T23:58:08.685Z,1516406288.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-19T23:58:09.052Z,1516406289.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:09.082Z,1516406289.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-19T23:58:09.083Z,1516406289.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:09.455Z,1516406289.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:09.489Z,1516406289.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-19T23:58:09.490Z,1516406289.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:09.862Z,1516406289.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:09.888Z,1516406289.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-19T23:58:09.889Z,1516406289.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:10.262Z,1516406290.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:10.286Z,1516406290.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-19T23:58:10.287Z,1516406290.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:10.662Z,1516406290.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:10.686Z,1516406290.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-19T23:58:10.687Z,1516406290.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:11.051Z,1516406291.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:11.093Z,1516406291.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-19T23:58:11.094Z,1516406291.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:11.445Z,1516406291.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:11.459Z,1516406291.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-19T23:58:11.460Z,1516406291.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:11.851Z,1516406291.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:11.887Z,1516406291.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-19T23:58:11.887Z,1516406291.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:12.256Z,1516406292.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:12.269Z,1516406292.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-19T23:58:12.270Z,1516406292.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:12.646Z,1516406292.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:12.660Z,1516406292.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-19T23:58:12.661Z,1516406292.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:13.062Z,1516406293.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:13.092Z,1516406293.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-19T23:58:13.097Z,1516406293.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:13.474Z,1516406293.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:13.498Z,1516406293.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-19T23:58:13.498Z,1516406293.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:13.858Z,1516406293.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:13.872Z,1516406293.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-19T23:58:13.873Z,1516406293.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:14.259Z,1516406294.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:14.294Z,1516406294.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-19T23:58:14.295Z,1516406294.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:14.659Z,1516406294.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:14.672Z,1516406294.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-19T23:58:14.673Z,1516406294.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:15.061Z,1516406295.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:15.075Z,1516406295.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-19T23:58:15.076Z,1516406295.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:15.460Z,1516406295.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:15.474Z,1516406295.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-19T23:58:15.475Z,1516406295.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:15.858Z,1516406295.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:15.872Z,1516406295.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-19T23:58:15.872Z,1516406295.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:16.270Z,1516406296.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:16.299Z,1516406296.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-19T23:58:16.300Z,1516406296.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:16.674Z,1516406296.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:16.694Z,1516406296.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-19T23:58:16.695Z,1516406296.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:17.059Z,1516406297.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:17.072Z,1516406297.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-19T23:58:17.073Z,1516406297.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:17.454Z,1516406297.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:17.468Z,1516406297.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-19T23:58:17.469Z,1516406297.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:17.856Z,1516406297.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:17.874Z,1516406297.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-19T23:58:17.875Z,1516406297.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:18.261Z,1516406298.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:18.274Z,1516406298.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-19T23:58:18.275Z,1516406298.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:18.656Z,1516406298.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:18.670Z,1516406298.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-19T23:58:18.671Z,1516406298.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:19.074Z,1516406299.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:19.094Z,1516406299.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-19T23:58:19.095Z,1516406299.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:19.470Z,1516406299.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:19.491Z,1516406299.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-19T23:58:19.492Z,1516406299.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:19.860Z,1516406299.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:19.878Z,1516406299.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-19T23:58:19.879Z,1516406299.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:20.260Z,1516406300.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:20.278Z,1516406300.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-19T23:58:20.279Z,1516406300.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:20.660Z,1516406300.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:20.674Z,1516406300.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-19T23:58:20.675Z,1516406300.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:21.062Z,1516406301.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:21.082Z,1516406301.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-19T23:58:21.083Z,1516406301.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:21.460Z,1516406301.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:21.474Z,1516406301.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-19T23:58:21.474Z,1516406301.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:21.866Z,1516406301.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:21.880Z,1516406301.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-19T23:58:21.881Z,1516406301.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:22.260Z,1516406302.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:22.286Z,1516406302.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-19T23:58:22.287Z,1516406302.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:22.669Z,1516406302.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:22.683Z,1516406302.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-19T23:58:22.684Z,1516406302.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:23.065Z,1516406303.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:23.078Z,1516406303.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-19T23:58:23.079Z,1516406303.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:23.457Z,1516406303.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:23.474Z,1516406303.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-19T23:58:23.475Z,1516406303.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:23.864Z,1516406303.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:23.878Z,1516406303.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-19T23:58:23.879Z,1516406303.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:24.262Z,1516406304.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:24.275Z,1516406304.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-19T23:58:24.276Z,1516406304.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:24.658Z,1516406304.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:24.676Z,1516406304.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-19T23:58:24.676Z,1516406304.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:25.082Z,1516406305.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:25.096Z,1516406305.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-19T23:58:25.097Z,1516406305.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:25.472Z,1516406305.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:25.490Z,1516406305.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-19T23:58:25.491Z,1516406305.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:25.866Z,1516406305.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:25.891Z,1516406305.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-19T23:58:25.892Z,1516406305.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:26.252Z,1516406306.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:26.287Z,1516406306.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-19T23:58:26.287Z,1516406306.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:26.647Z,1516406306.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:26.686Z,1516406306.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-19T23:58:26.687Z,1516406306.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:27.057Z,1516406307.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:27.083Z,1516406307.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-19T23:58:27.084Z,1516406307.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:27.451Z,1516406307.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:27.479Z,1516406307.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-19T23:58:27.480Z,1516406307.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:27.858Z,1516406307.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:27.893Z,1516406307.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:28.278Z,1516406308.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:28.299Z,1516406308.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:28.674Z,1516406308.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:28.691Z,1516406308.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:29.055Z,1516406309.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:29.090Z,1516406309.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:29.445Z,1516406309.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:29.459Z,1516406309.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:29.851Z,1516406309.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:29.886Z,1516406309.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:30.260Z,1516406310.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:30.298Z,1516406310.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:30.651Z,1516406310.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:30.667Z,1516406310.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:31.066Z,1516406311.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:31.096Z,1516406311.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:31.474Z,1516406311.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:31.498Z,1516406311.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:31.859Z,1516406311.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:31.873Z,1516406311.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:32.260Z,1516406312.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:32.275Z,1516406312.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:32.659Z,1516406312.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:32.673Z,1516406312.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:33.052Z,1516406313.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:33.081Z,1516406313.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:33.460Z,1516406313.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:33.475Z,1516406313.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:33.858Z,1516406313.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:33.872Z,1516406313.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:34.270Z,1516406314.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:34.284Z,1516406314.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:34.674Z,1516406314.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:34.705Z,1516406314.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:35.063Z,1516406315.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:35.078Z,1516406315.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:35.457Z,1516406315.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:35.471Z,1516406315.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:35.859Z,1516406315.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:35.879Z,1516406315.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:36.264Z,1516406316.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:36.278Z,1516406316.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:36.650Z,1516406316.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:36.670Z,1516406316.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:37.064Z,1516406317.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:37.083Z,1516406317.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:37.470Z,1516406317.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:37.484Z,1516406317.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:37.864Z,1516406317.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:37.883Z,1516406317.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:38.263Z,1516406318.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:38.277Z,1516406318.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:38.663Z,1516406318.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:38.677Z,1516406318.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:41.751Z,1516406321.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:41.765Z,1516406321.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:41.872Z,1516406321.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:41.914Z,1516406321.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:42.226Z,1516406322.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:42.240Z,1516406322.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:42.634Z,1516406322.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:42.667Z,1516406322.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:43.030Z,1516406323.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:43.044Z,1516406323.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:43.420Z,1516406323.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:43.439Z,1516406323.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:43.820Z,1516406323.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:43.834Z,1516406323.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:44.221Z,1516406324.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:44.243Z,1516406324.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:44.620Z,1516406324.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:44.639Z,1516406324.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:45.034Z,1516406325.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:45.048Z,1516406325.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:45.420Z,1516406325.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:45.439Z,1516406325.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:45.822Z,1516406325.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:45.836Z,1516406325.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:46.216Z,1516406326.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:46.229Z,1516406326.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:46.610Z,1516406326.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:46.630Z,1516406326.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:47.015Z,1516406327.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:47.037Z,1516406327.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:47.423Z,1516406327.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:47.437Z,1516406327.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:47.822Z,1516406327.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:47.842Z,1516406327.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:48.226Z,1516406328.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:48.240Z,1516406328.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:48.625Z,1516406328.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:48.646Z,1516406328.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:49.017Z,1516406329.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:49.031Z,1516406329.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:49.416Z,1516406329.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:49.445Z,1516406329.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:49.824Z,1516406329.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:49.837Z,1516406329.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:50.227Z,1516406330.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:50.250Z,1516406330.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:50.635Z,1516406330.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:50.657Z,1516406330.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:51.033Z,1516406331.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:51.054Z,1516406331.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:51.413Z,1516406331.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:51.451Z,1516406331.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:51.818Z,1516406331.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:51.852Z,1516406331.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:52.214Z,1516406332.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:52.287Z,1516406332.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:52.611Z,1516406332.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:52.646Z,1516406332.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:53.042Z,1516406333.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:53.061Z,1516406333.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:53.428Z,1516406333.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:53.465Z,1516406333.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:53.824Z,1516406333.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:53.861Z,1516406333.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:54.213Z,1516406334.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:54.255Z,1516406334.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:54.613Z,1516406334.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:54.657Z,1516406334.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:55.013Z,1516406335.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:55.055Z,1516406335.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:55.430Z,1516406335.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:55.466Z,1516406335.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:55.852Z,1516406335.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:55.928Z,1516406335.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:56.233Z,1516406336.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:56.266Z,1516406336.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:56.658Z,1516406336.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:56.672Z,1516406336.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:57.032Z,1516406337.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:57.116Z,1516406337.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:57.419Z,1516406337.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:57.461Z,1516406337.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:57.820Z,1516406337.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:57.858Z,1516406337.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:58.223Z,1516406338.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:58.280Z,1516406338.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:58.622Z,1516406338.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:58.645Z,1516406338.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:59.044Z,1516406339.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:59.079Z,1516406339.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:59.426Z,1516406339.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:59.467Z,1516406339.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:58:59.833Z,1516406339.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:58:59.860Z,1516406339.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:00.224Z,1516406340.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:00.250Z,1516406340.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:00.615Z,1516406340.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:00.651Z,1516406340.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:01.014Z,1516406341.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:01.050Z,1516406341.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:01.451Z,1516406341.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:01.471Z,1516406341.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:01.820Z,1516406341.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:01.858Z,1516406341.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:02.231Z,1516406342.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:02.259Z,1516406342.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:02.635Z,1516406342.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:02.667Z,1516406342.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:03.030Z,1516406343.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:03.059Z,1516406343.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:03.407Z,1516406343.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:03.434Z,1516406343.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:03.817Z,1516406343.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:03.831Z,1516406343.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:04.216Z,1516406344.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:04.230Z,1516406344.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:04.615Z,1516406344.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:04.630Z,1516406344.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:05.034Z,1516406345.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:05.056Z,1516406345.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:05.430Z,1516406345.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:05.460Z,1516406345.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:05.822Z,1516406345.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:05.836Z,1516406345.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:06.221Z,1516406346.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:06.235Z,1516406346.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:06.617Z,1516406346.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:06.630Z,1516406346.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:07.021Z,1516406347.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:07.035Z,1516406347.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:07.419Z,1516406347.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:07.434Z,1516406347.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:07.815Z,1516406347.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:07.829Z,1516406347.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:08.235Z,1516406348.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:08.263Z,1516406348.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:08.634Z,1516406348.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:08.664Z,1516406348.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:09.029Z,1516406349.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:09.043Z,1516406349.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:09.412Z,1516406349.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:09.438Z,1516406349.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:09.819Z,1516406349.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:09.833Z,1516406349.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:10.224Z,1516406350.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:10.237Z,1516406350.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:10.612Z,1516406350.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:10.630Z,1516406350.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:11.026Z,1516406351.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:11.040Z,1516406351.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:11.430Z,1516406351.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:11.443Z,1516406351.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:11.823Z,1516406351.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:11.839Z,1516406351.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:12.223Z,1516406352.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:12.237Z,1516406352.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:12.616Z,1516406352.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:12.630Z,1516406352.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:13.023Z,1516406353.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:13.037Z,1516406353.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:13.420Z,1516406353.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:13.434Z,1516406353.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:13.816Z,1516406353.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:13.834Z,1516406353.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:13.847Z,1516406353.847 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-19T23:59:14.224Z,1516406354.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:14.243Z,1516406354.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:14.630Z,1516406354.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:14.644Z,1516406354.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:15.026Z,1516406355.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:15.047Z,1516406355.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:15.409Z,1516406355.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:15.430Z,1516406355.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:15.823Z,1516406355.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:15.837Z,1516406355.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:16.216Z,1516406356.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:16.230Z,1516406356.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:16.616Z,1516406356.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:16.630Z,1516406356.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:17.024Z,1516406357.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:17.043Z,1516406357.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:17.426Z,1516406357.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:17.440Z,1516406357.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:17.823Z,1516406357.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:17.843Z,1516406357.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:18.219Z,1516406358.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:18.239Z,1516406358.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:18.624Z,1516406358.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:18.637Z,1516406358.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:19.030Z,1516406359.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:19.044Z,1516406359.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:19.418Z,1516406359.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:19.436Z,1516406359.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:19.824Z,1516406359.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:19.838Z,1516406359.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:20.226Z,1516406360.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:20.241Z,1516406360.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:20.626Z,1516406360.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:20.640Z,1516406360.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:21.025Z,1516406361.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:21.047Z,1516406361.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:21.408Z,1516406361.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:21.438Z,1516406361.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:21.819Z,1516406361.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:21.833Z,1516406361.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:22.216Z,1516406362.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:22.238Z,1516406362.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:22.610Z,1516406362.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:22.630Z,1516406362.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:23.024Z,1516406363.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:23.043Z,1516406363.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:23.426Z,1516406363.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:23.440Z,1516406363.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:23.826Z,1516406363.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:23.840Z,1516406363.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:24.223Z,1516406364.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:24.237Z,1516406364.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:24.618Z,1516406364.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:24.645Z,1516406364.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:25.023Z,1516406365.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:25.043Z,1516406365.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:25.424Z,1516406365.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:25.438Z,1516406365.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:25.820Z,1516406365.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:25.839Z,1516406365.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:26.229Z,1516406366.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:26.251Z,1516406366.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:26.630Z,1516406366.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:26.644Z,1516406366.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:27.030Z,1516406367.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:27.044Z,1516406367.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:27.416Z,1516406367.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:27.434Z,1516406367.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:27.823Z,1516406367.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:27.843Z,1516406367.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:28.225Z,1516406368.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:28.239Z,1516406368.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:28.614Z,1516406368.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:28.634Z,1516406368.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:29.029Z,1516406369.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:29.043Z,1516406369.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:29.430Z,1516406369.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:29.444Z,1516406369.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:29.829Z,1516406369.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:29.843Z,1516406369.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:30.219Z,1516406370.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:30.233Z,1516406370.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:30.620Z,1516406370.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:30.634Z,1516406370.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:31.023Z,1516406371.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:31.043Z,1516406371.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:31.424Z,1516406371.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:31.438Z,1516406371.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:31.824Z,1516406371.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:31.839Z,1516406371.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:32.226Z,1516406372.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:32.240Z,1516406372.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:32.630Z,1516406372.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:32.644Z,1516406372.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:33.030Z,1516406373.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:33.044Z,1516406373.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:33.422Z,1516406373.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:33.436Z,1516406373.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:33.818Z,1516406373.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:33.836Z,1516406373.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:34.229Z,1516406374.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:34.251Z,1516406374.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:34.624Z,1516406374.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:34.638Z,1516406374.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:35.029Z,1516406375.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:35.043Z,1516406375.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:35.430Z,1516406375.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:35.444Z,1516406375.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:35.829Z,1516406375.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:35.843Z,1516406375.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:36.221Z,1516406376.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:36.235Z,1516406376.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:36.612Z,1516406376.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:36.642Z,1516406376.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:37.025Z,1516406377.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:37.039Z,1516406377.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:37.426Z,1516406377.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:37.440Z,1516406377.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:37.818Z,1516406377.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:37.842Z,1516406377.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:38.236Z,1516406378.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:38.250Z,1516406378.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:38.634Z,1516406378.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:38.649Z,1516406378.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:39.041Z,1516406379.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:39.056Z,1516406379.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:42.103Z,1516406382.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:42.138Z,1516406382.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:42.230Z,1516406382.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:42.251Z,1516406382.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:42.627Z,1516406382.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:42.642Z,1516406382.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:43.030Z,1516406383.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:43.044Z,1516406383.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:43.428Z,1516406383.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:43.443Z,1516406383.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:43.801Z,1516406383.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:43.815Z,1516406383.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:44.206Z,1516406384.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:44.220Z,1516406384.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:44.607Z,1516406384.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:44.623Z,1516406384.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:45.018Z,1516406385.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:45.051Z,1516406385.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:45.422Z,1516406385.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:45.445Z,1516406385.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:45.822Z,1516406385.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:45.843Z,1516406385.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:46.210Z,1516406386.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:46.224Z,1516406386.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:46.605Z,1516406386.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:46.627Z,1516406386.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:47.007Z,1516406387.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:47.027Z,1516406387.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:47.413Z,1516406387.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:47.427Z,1516406387.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:47.809Z,1516406387.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:47.823Z,1516406387.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:48.227Z,1516406388.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:48.256Z,1516406388.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:48.612Z,1516406388.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:48.627Z,1516406388.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:49.022Z,1516406389.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:49.055Z,1516406389.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:49.406Z,1516406389.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:49.425Z,1516406389.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:49.808Z,1516406389.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:49.821Z,1516406389.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:50.200Z,1516406390.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:50.224Z,1516406390.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:50.608Z,1516406390.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:50.630Z,1516406390.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:51.018Z,1516406391.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:51.032Z,1516406391.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:51.418Z,1516406391.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:51.432Z,1516406391.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:51.816Z,1516406391.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:51.831Z,1516406391.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:52.215Z,1516406392.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:52.229Z,1516406392.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:52.613Z,1516406392.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:52.628Z,1516406392.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:53.011Z,1516406393.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:53.025Z,1516406393.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:53.404Z,1516406393.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:53.425Z,1516406393.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:53.813Z,1516406393.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:53.831Z,1516406393.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:54.218Z,1516406394.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:54.233Z,1516406394.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:54.618Z,1516406394.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:54.632Z,1516406394.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:55.017Z,1516406395.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:55.031Z,1516406395.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:55.414Z,1516406395.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:55.428Z,1516406395.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:55.814Z,1516406395.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:55.828Z,1516406395.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:56.212Z,1516406396.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:56.231Z,1516406396.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:56.611Z,1516406396.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:56.628Z,1516406396.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:57.016Z,1516406397.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:57.030Z,1516406397.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:57.418Z,1516406397.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:57.432Z,1516406397.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:57.818Z,1516406397.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:57.832Z,1516406397.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:58.212Z,1516406398.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:58.239Z,1516406398.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:58.611Z,1516406398.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:58.619Z,1516406398.619 [PNI_TCM](ERROR): CRC does not match. Expected:0x58312 got:0x44800
2018-01-19T23:59:58.655Z,1516406398.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:59.010Z,1516406399.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:59.024Z,1516406399.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:59.407Z,1516406399.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:59.421Z,1516406399.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-19T23:59:59.812Z,1516406399.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-19T23:59:59.851Z,1516406399.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:00.215Z,1516406400.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:00.222Z,1516406400.222 [PNI_TCM](ERROR): CRC does not match. Expected:0x63917 got:0x7361
2018-01-20T00:00:00.256Z,1516406400.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:00.619Z,1516406400.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:00.632Z,1516406400.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:01.018Z,1516406401.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:01.032Z,1516406401.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:01.407Z,1516406401.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:01.439Z,1516406401.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:01.814Z,1516406401.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:01.829Z,1516406401.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:02.213Z,1516406402.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:02.235Z,1516406402.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:02.614Z,1516406402.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:02.635Z,1516406402.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:03.017Z,1516406403.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:03.058Z,1516406403.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:03.419Z,1516406403.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:03.426Z,1516406403.426 [PNI_TCM](ERROR): CRC does not match. Expected:0x58629 got:0x29716
2018-01-20T00:00:03.462Z,1516406403.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:03.818Z,1516406403.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:03.839Z,1516406403.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:04.209Z,1516406404.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:04.223Z,1516406404.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:04.607Z,1516406404.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:04.655Z,1516406404.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:05.011Z,1516406405.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:05.029Z,1516406405.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:05.414Z,1516406405.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:05.428Z,1516406405.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:05.815Z,1516406405.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:05.835Z,1516406405.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:06.216Z,1516406406.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:06.254Z,1516406406.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:06.620Z,1516406406.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:06.635Z,1516406406.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:07.018Z,1516406407.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:07.039Z,1516406407.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:07.414Z,1516406407.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:07.435Z,1516406407.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:07.812Z,1516406407.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:07.838Z,1516406407.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:08.210Z,1516406408.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:08.228Z,1516406408.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:08.607Z,1516406408.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:08.624Z,1516406408.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:09.020Z,1516406409.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:09.034Z,1516406409.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:09.418Z,1516406409.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:09.454Z,1516406409.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:09.816Z,1516406409.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:09.834Z,1516406409.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:10.208Z,1516406410.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:10.226Z,1516406410.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:10.614Z,1516406410.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:10.628Z,1516406410.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:11.011Z,1516406411.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:11.054Z,1516406411.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:11.411Z,1516406411.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:11.428Z,1516406411.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:11.812Z,1516406411.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:11.829Z,1516406411.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:12.219Z,1516406412.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:12.239Z,1516406412.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:12.618Z,1516406412.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:12.655Z,1516406412.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:13.017Z,1516406413.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:13.035Z,1516406413.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:13.411Z,1516406413.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:13.429Z,1516406413.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:13.815Z,1516406413.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:13.829Z,1516406413.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:14.213Z,1516406414.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:14.253Z,1516406414.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:14.605Z,1516406414.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:14.625Z,1516406414.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:15.019Z,1516406415.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:15.036Z,1516406415.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:15.416Z,1516406415.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:15.431Z,1516406415.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:15.830Z,1516406415.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:15.867Z,1516406415.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:16.210Z,1516406416.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:16.223Z,1516406416.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:16.604Z,1516406416.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:16.635Z,1516406416.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:17.009Z,1516406417.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:17.033Z,1516406417.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:17.414Z,1516406417.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:17.439Z,1516406417.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:17.793Z,1516406417.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:17.826Z,1516406417.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:18.222Z,1516406418.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:18.239Z,1516406418.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:18.625Z,1516406418.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:18.639Z,1516406418.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:19.022Z,1516406419.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:19.066Z,1516406419.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:19.411Z,1516406419.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:19.430Z,1516406419.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:19.812Z,1516406419.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:19.827Z,1516406419.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:20.212Z,1516406420.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:20.231Z,1516406420.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:20.611Z,1516406420.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:20.626Z,1516406420.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:21.019Z,1516406421.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:21.034Z,1516406421.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:21.412Z,1516406421.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:21.444Z,1516406421.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:21.822Z,1516406421.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:21.840Z,1516406421.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:22.213Z,1516406422.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:22.240Z,1516406422.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:22.593Z,1516406422.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:22.627Z,1516406422.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:23.022Z,1516406423.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:23.045Z,1516406423.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:23.428Z,1516406423.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:23.443Z,1516406423.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:23.818Z,1516406423.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:23.864Z,1516406423.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:24.200Z,1516406424.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:24.235Z,1516406424.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:24.604Z,1516406424.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:24.630Z,1516406424.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:25.022Z,1516406425.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:25.040Z,1516406425.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:25.426Z,1516406425.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:25.447Z,1516406425.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:25.824Z,1516406425.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:25.837Z,1516406425.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:26.214Z,1516406426.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:26.228Z,1516406426.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:26.599Z,1516406426.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:26.635Z,1516406426.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:27.020Z,1516406427.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:27.034Z,1516406427.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:27.416Z,1516406427.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:27.435Z,1516406427.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:27.822Z,1516406427.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:27.847Z,1516406427.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:28.204Z,1516406428.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:28.233Z,1516406428.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:28.593Z,1516406428.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:28.615Z,1516406428.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:29.018Z,1516406429.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:29.033Z,1516406429.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:29.422Z,1516406429.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:29.436Z,1516406429.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:29.818Z,1516406429.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:29.834Z,1516406429.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:30.200Z,1516406430.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:30.226Z,1516406430.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:30.595Z,1516406430.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:30.611Z,1516406430.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:31.024Z,1516406431.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:31.038Z,1516406431.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:31.432Z,1516406431.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:31.449Z,1516406431.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:31.828Z,1516406431.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:31.843Z,1516406431.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:32.205Z,1516406432.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:32.234Z,1516406432.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:32.607Z,1516406432.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:32.636Z,1516406432.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:33.025Z,1516406433.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:33.043Z,1516406433.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:33.414Z,1516406433.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:33.443Z,1516406433.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:33.828Z,1516406433.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:33.842Z,1516406433.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:34.208Z,1516406434.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:34.237Z,1516406434.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:34.595Z,1516406434.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:34.621Z,1516406434.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:35.018Z,1516406435.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:35.048Z,1516406435.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:35.418Z,1516406435.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:35.444Z,1516406435.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:35.810Z,1516406435.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:35.824Z,1516406435.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:36.209Z,1516406436.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:36.223Z,1516406436.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:36.608Z,1516406436.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:36.622Z,1516406436.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:37.022Z,1516406437.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:37.051Z,1516406437.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:37.422Z,1516406437.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:37.452Z,1516406437.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:37.814Z,1516406437.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:37.834Z,1516406437.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:38.206Z,1516406438.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:38.220Z,1516406438.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:38.611Z,1516406438.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:38.625Z,1516406438.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:39.013Z,1516406439.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:39.027Z,1516406439.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:39.418Z,1516406439.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:39.441Z,1516406439.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:42.516Z,1516406442.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:42.530Z,1516406442.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:42.628Z,1516406442.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:42.671Z,1516406442.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:42.981Z,1516406442.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:43.019Z,1516406443.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:43.388Z,1516406443.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:43.423Z,1516406443.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:43.781Z,1516406443.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:43.795Z,1516406443.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:44.194Z,1516406444.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:44.208Z,1516406444.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:44.598Z,1516406444.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:44.612Z,1516406444.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:45.002Z,1516406445.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:45.016Z,1516406445.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:45.388Z,1516406445.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:45.402Z,1516406445.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:45.785Z,1516406445.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:45.799Z,1516406445.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:46.174Z,1516406446.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:46.205Z,1516406446.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:46.588Z,1516406446.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:46.607Z,1516406446.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:46.989Z,1516406446.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:47.003Z,1516406447.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:47.393Z,1516406447.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:47.407Z,1516406447.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:47.793Z,1516406447.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:47.807Z,1516406447.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:48.194Z,1516406448.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:48.208Z,1516406448.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:48.574Z,1516406448.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:48.600Z,1516406448.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:48.988Z,1516406448.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:49.002Z,1516406449.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:49.376Z,1516406449.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:49.411Z,1516406449.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:49.779Z,1516406449.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:49.805Z,1516406449.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:50.194Z,1516406450.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:50.208Z,1516406450.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:50.594Z,1516406450.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:50.613Z,1516406450.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:51.007Z,1516406451.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:51.021Z,1516406451.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:51.376Z,1516406451.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:51.407Z,1516406451.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:51.772Z,1516406451.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:51.806Z,1516406451.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:52.180Z,1516406452.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:52.206Z,1516406452.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:52.577Z,1516406452.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:52.607Z,1516406452.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:52.980Z,1516406452.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:53.016Z,1516406453.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:53.383Z,1516406453.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:53.409Z,1516406453.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:53.800Z,1516406453.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:53.814Z,1516406453.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:54.182Z,1516406454.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:54.222Z,1516406454.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:54.580Z,1516406454.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:54.615Z,1516406454.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:54.980Z,1516406454.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:55.011Z,1516406455.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:55.385Z,1516406455.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:55.419Z,1516406455.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:55.776Z,1516406455.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:55.791Z,1516406455.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:56.195Z,1516406456.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:56.219Z,1516406456.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:56.598Z,1516406456.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:56.624Z,1516406456.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:56.990Z,1516406456.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:57.020Z,1516406457.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:57.381Z,1516406457.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:57.395Z,1516406457.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:57.783Z,1516406457.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:57.797Z,1516406457.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:58.177Z,1516406458.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:58.192Z,1516406458.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:58.584Z,1516406458.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:58.598Z,1516406458.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:58.980Z,1516406458.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:58.994Z,1516406458.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:59.382Z,1516406459.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:59.396Z,1516406459.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:00:59.794Z,1516406459.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:00:59.808Z,1516406459.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:00.198Z,1516406460.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:00.212Z,1516406460.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:00.580Z,1516406460.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:00.594Z,1516406460.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:00.986Z,1516406460.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:01.000Z,1516406461.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:01.378Z,1516406461.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:01.405Z,1516406461.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:01.779Z,1516406461.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:01.797Z,1516406461.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:02.186Z,1516406462.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:02.201Z,1516406462.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:02.590Z,1516406462.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:02.604Z,1516406462.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:02.991Z,1516406462.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:03.005Z,1516406463.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:03.388Z,1516406463.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:03.402Z,1516406463.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:03.789Z,1516406463.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:03.802Z,1516406463.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:04.188Z,1516406464.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:04.203Z,1516406464.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:04.584Z,1516406464.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:04.599Z,1516406464.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:04.988Z,1516406464.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:05.002Z,1516406465.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:05.390Z,1516406465.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:05.405Z,1516406465.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:05.794Z,1516406465.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:05.809Z,1516406465.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:06.190Z,1516406466.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:06.204Z,1516406466.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:06.588Z,1516406466.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:06.602Z,1516406466.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:06.982Z,1516406466.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:06.000Z,1516406467.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:07.389Z,1516406467.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:07.403Z,1516406467.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:07.777Z,1516406467.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:07.807Z,1516406467.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:08.193Z,1516406468.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:08.207Z,1516406468.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:08.594Z,1516406468.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:08.608Z,1516406468.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:08.993Z,1516406468.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:09.011Z,1516406469.011 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:09.011Z,1516406469.011 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-01-20T00:01:09.011Z,1516406469.011 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:01:09.013Z,1516406469.013 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:09.013Z,1516406469.013 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-01-20T00:01:09.013Z,1516406469.013 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:01:09.015Z,1516406469.015 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:09.015Z,1516406469.015 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 57
2018-01-20T00:01:09.015Z,1516406469.015 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:01:09.047Z,1516406469.047 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:01:09.047Z,1516406469.047 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:01:09.047Z,1516406469.047 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:01:09.395Z,1516406469.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:09.420Z,1516406469.420 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:01:09.420Z,1516406469.420 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-01-20T00:01:09.421Z,1516406469.421 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:01:09.421Z,1516406469.421 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-01-20T00:01:09.421Z,1516406469.421 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:01:09.421Z,1516406469.421 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 57
2018-01-20T00:01:09.771Z,1516406469.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:09.813Z,1516406469.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:01:09.814Z,1516406469.814 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:01:09.814Z,1516406469.814 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:01:09.814Z,1516406469.814 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:01:09.815Z,1516406469.815 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:01:09.815Z,1516406469.815 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:01:09.815Z,1516406469.815 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:01:09.816Z,1516406469.816 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:01:09.816Z,1516406469.816 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:01:10.179Z,1516406470.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:10.210Z,1516406470.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:01:10.211Z,1516406470.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:10.576Z,1516406470.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:10.602Z,1516406470.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:01:10.603Z,1516406470.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:10.979Z,1516406470.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:10.992Z,1516406470.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:01:11.019Z,1516406471.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:11.390Z,1516406471.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:11.415Z,1516406471.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:01:11.416Z,1516406471.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:11.790Z,1516406471.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:11.822Z,1516406471.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:01:11.823Z,1516406471.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:12.190Z,1516406472.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:12.222Z,1516406472.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:01:12.223Z,1516406472.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:12.579Z,1516406472.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:12.614Z,1516406472.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:01:12.614Z,1516406472.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:12.975Z,1516406472.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:13.010Z,1516406473.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:01:13.011Z,1516406473.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:13.384Z,1516406473.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:13.420Z,1516406473.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:01:13.421Z,1516406473.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:13.777Z,1516406473.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:13.791Z,1516406473.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:01:13.792Z,1516406473.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:14.194Z,1516406474.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:14.216Z,1516406474.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:01:14.217Z,1516406474.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:14.598Z,1516406474.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:14.621Z,1516406474.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:01:14.622Z,1516406474.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:14.990Z,1516406474.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:15.026Z,1516406475.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:01:15.027Z,1516406475.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:15.383Z,1516406475.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:15.402Z,1516406475.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:01:15.403Z,1516406475.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:15.781Z,1516406475.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:15.794Z,1516406475.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:01:15.795Z,1516406475.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:16.181Z,1516406476.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:16.195Z,1516406476.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:01:16.195Z,1516406476.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:16.583Z,1516406476.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:16.596Z,1516406476.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:01:16.598Z,1516406476.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:16.977Z,1516406476.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:17.003Z,1516406477.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:01:17.003Z,1516406477.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:17.389Z,1516406477.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:17.410Z,1516406477.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:01:17.411Z,1516406477.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:17.790Z,1516406477.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:17.804Z,1516406477.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:01:17.805Z,1516406477.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:18.190Z,1516406478.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:18.203Z,1516406478.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:01:18.204Z,1516406478.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:18.588Z,1516406478.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:18.602Z,1516406478.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:01:18.603Z,1516406478.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:18.988Z,1516406478.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:19.001Z,1516406479.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:01:19.002Z,1516406479.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:19.381Z,1516406479.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:19.394Z,1516406479.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:01:19.395Z,1516406479.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:19.788Z,1516406479.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:19.802Z,1516406479.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:01:19.802Z,1516406479.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:20.189Z,1516406480.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:20.203Z,1516406480.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:01:20.204Z,1516406480.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:20.590Z,1516406480.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:20.603Z,1516406480.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:01:20.604Z,1516406480.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:20.990Z,1516406480.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:21.004Z,1516406481.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:01:21.005Z,1516406481.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:21.378Z,1516406481.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:21.400Z,1516406481.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:01:21.405Z,1516406481.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:21.788Z,1516406481.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:21.802Z,1516406481.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T00:01:21.802Z,1516406481.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:22.187Z,1516406482.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:22.201Z,1516406482.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:01:22.202Z,1516406482.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:22.582Z,1516406482.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:22.601Z,1516406482.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:01:22.602Z,1516406482.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:22.971Z,1516406482.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:23.006Z,1516406483.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:01:23.007Z,1516406483.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:23.398Z,1516406483.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:23.412Z,1516406483.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:01:23.413Z,1516406483.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:23.797Z,1516406483.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:23.811Z,1516406483.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:01:23.812Z,1516406483.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:24.198Z,1516406484.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:24.212Z,1516406484.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:01:24.212Z,1516406484.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:24.585Z,1516406484.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:24.599Z,1516406484.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:01:24.600Z,1516406484.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:24.982Z,1516406484.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:25.011Z,1516406485.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:01:25.012Z,1516406485.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:25.389Z,1516406485.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:25.403Z,1516406485.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:01:25.404Z,1516406485.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:25.787Z,1516406485.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:25.801Z,1516406485.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:01:25.802Z,1516406485.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:26.194Z,1516406486.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:26.208Z,1516406486.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:01:26.209Z,1516406486.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:26.595Z,1516406486.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:26.608Z,1516406486.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:01:26.609Z,1516406486.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:26.998Z,1516406486.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:27.012Z,1516406487.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:01:27.013Z,1516406487.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:27.382Z,1516406487.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:27.411Z,1516406487.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:01:27.412Z,1516406487.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:27.788Z,1516406487.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:27.802Z,1516406487.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:01:27.802Z,1516406487.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:28.188Z,1516406488.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:28.206Z,1516406488.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:01:28.207Z,1516406488.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:28.589Z,1516406488.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:28.602Z,1516406488.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:01:28.603Z,1516406488.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:28.971Z,1516406488.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:29.006Z,1516406489.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T00:01:29.007Z,1516406489.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:29.394Z,1516406489.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:29.408Z,1516406489.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:29.798Z,1516406489.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:29.812Z,1516406489.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:30.199Z,1516406490.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:30.212Z,1516406490.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:30.582Z,1516406490.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:30.600Z,1516406490.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:30.979Z,1516406490.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:31.003Z,1516406491.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:31.387Z,1516406491.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:31.402Z,1516406491.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:31.785Z,1516406491.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:31.799Z,1516406491.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:32.197Z,1516406492.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:32.217Z,1516406492.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:32.596Z,1516406492.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:32.610Z,1516406492.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:32.986Z,1516406492.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:33.019Z,1516406493.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:33.388Z,1516406493.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:33.403Z,1516406493.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:33.771Z,1516406493.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:33.805Z,1516406493.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:34.188Z,1516406494.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:34.203Z,1516406494.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:34.582Z,1516406494.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:34.609Z,1516406494.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:34.988Z,1516406494.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:35.003Z,1516406495.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:35.393Z,1516406495.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:35.414Z,1516406495.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:35.798Z,1516406495.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:35.819Z,1516406495.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:36.198Z,1516406496.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:36.213Z,1516406496.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:36.573Z,1516406496.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:36.599Z,1516406496.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:36.979Z,1516406496.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:37.004Z,1516406497.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:37.372Z,1516406497.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:37.403Z,1516406497.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:37.773Z,1516406497.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:37.806Z,1516406497.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:38.194Z,1516406498.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:38.208Z,1516406498.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:38.597Z,1516406498.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:38.623Z,1516406498.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:38.999Z,1516406498.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:39.013Z,1516406499.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:39.375Z,1516406499.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:39.407Z,1516406499.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:39.776Z,1516406499.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:39.803Z,1516406499.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:42.894Z,1516406502.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:42.909Z,1516406502.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:43.017Z,1516406503.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:43.062Z,1516406503.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:43.370Z,1516406503.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:43.384Z,1516406503.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:43.782Z,1516406503.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:43.807Z,1516406503.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:44.174Z,1516406504.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:44.188Z,1516406504.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:44.565Z,1516406504.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:44.579Z,1516406504.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:44.964Z,1516406504.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:44.978Z,1516406504.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:45.365Z,1516406505.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:45.379Z,1516406505.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:45.761Z,1516406505.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:45.779Z,1516406505.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:46.174Z,1516406506.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:46.188Z,1516406506.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:46.574Z,1516406506.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:46.588Z,1516406506.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:46.973Z,1516406506.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:46.987Z,1516406506.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:47.368Z,1516406507.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:47.382Z,1516406507.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:47.767Z,1516406507.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:47.787Z,1516406507.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:48.167Z,1516406508.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:48.181Z,1516406508.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:48.569Z,1516406508.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:48.583Z,1516406508.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:48.974Z,1516406508.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:48.988Z,1516406508.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:49.373Z,1516406509.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:49.387Z,1516406509.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:49.774Z,1516406509.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:49.787Z,1516406509.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:50.173Z,1516406510.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:50.187Z,1516406510.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:50.564Z,1516406510.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:50.578Z,1516406510.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:50.968Z,1516406510.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:50.982Z,1516406510.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:51.368Z,1516406511.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:51.383Z,1516406511.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:51.763Z,1516406511.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:51.783Z,1516406511.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:52.174Z,1516406512.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:52.188Z,1516406512.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:52.573Z,1516406512.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:52.587Z,1516406512.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:52.973Z,1516406512.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:52.987Z,1516406512.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:53.368Z,1516406513.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:53.382Z,1516406513.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:53.768Z,1516406513.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:53.782Z,1516406513.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:54.163Z,1516406514.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:54.183Z,1516406514.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:54.569Z,1516406514.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:54.583Z,1516406514.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:54.967Z,1516406514.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:54.982Z,1516406514.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:55.373Z,1516406515.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:55.387Z,1516406515.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:55.773Z,1516406515.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:55.786Z,1516406515.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:56.173Z,1516406516.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:56.187Z,1516406516.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:56.563Z,1516406516.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:56.583Z,1516406516.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:56.968Z,1516406516.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:56.982Z,1516406516.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:57.368Z,1516406517.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:57.383Z,1516406517.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:57.768Z,1516406517.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:57.782Z,1516406517.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:58.174Z,1516406518.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:58.188Z,1516406518.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:58.574Z,1516406518.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:58.588Z,1516406518.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:58.973Z,1516406518.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:58.995Z,1516406518.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:59.369Z,1516406519.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:59.383Z,1516406519.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:01:59.767Z,1516406519.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:01:59.787Z,1516406519.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:00.173Z,1516406520.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:00.187Z,1516406520.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:00.574Z,1516406520.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:00.588Z,1516406520.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:00.974Z,1516406520.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:00.988Z,1516406520.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:01.364Z,1516406521.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:01.378Z,1516406521.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:01.772Z,1516406521.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:01.786Z,1516406521.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:02.173Z,1516406522.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:02.187Z,1516406522.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:02.574Z,1516406522.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:02.588Z,1516406522.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:02.974Z,1516406522.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:02.987Z,1516406522.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:03.368Z,1516406523.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:03.383Z,1516406523.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:03.768Z,1516406523.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:03.783Z,1516406523.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:04.175Z,1516406524.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:04.188Z,1516406524.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:04.574Z,1516406524.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:04.588Z,1516406524.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:04.974Z,1516406524.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:04.988Z,1516406524.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:05.370Z,1516406525.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:05.384Z,1516406525.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:05.763Z,1516406525.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:05.777Z,1516406525.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:06.174Z,1516406526.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:06.188Z,1516406526.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:06.574Z,1516406526.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:06.588Z,1516406526.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:06.974Z,1516406526.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:06.988Z,1516406526.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:07.371Z,1516406527.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:07.385Z,1516406527.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:07.756Z,1516406527.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:07.793Z,1516406527.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:08.180Z,1516406528.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:08.194Z,1516406528.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:08.583Z,1516406528.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:08.597Z,1516406528.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:08.981Z,1516406528.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:08.995Z,1516406528.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:09.367Z,1516406529.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:09.387Z,1516406529.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:09.755Z,1516406529.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:09.794Z,1516406529.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:10.180Z,1516406530.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:10.195Z,1516406530.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:10.569Z,1516406530.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:10.588Z,1516406530.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:10.974Z,1516406530.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:10.989Z,1516406530.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:11.369Z,1516406531.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:11.383Z,1516406531.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:11.753Z,1516406531.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:11.775Z,1516406531.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:12.178Z,1516406532.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:12.193Z,1516406532.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:12.583Z,1516406532.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:12.597Z,1516406532.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:12.974Z,1516406532.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:12.997Z,1516406532.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:13.360Z,1516406533.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:13.390Z,1516406533.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:13.755Z,1516406533.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:13.789Z,1516406533.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:14.170Z,1516406534.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:14.196Z,1516406534.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:14.570Z,1516406534.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:14.595Z,1516406534.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:14.966Z,1516406534.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:14.995Z,1516406534.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:15.360Z,1516406535.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:15.390Z,1516406535.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:15.759Z,1516406535.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:15.799Z,1516406535.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:16.170Z,1516406536.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:16.204Z,1516406536.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:16.566Z,1516406536.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:16.580Z,1516406536.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:16.974Z,1516406536.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:17.004Z,1516406537.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:17.362Z,1516406537.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:17.376Z,1516406537.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:17.760Z,1516406537.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:17.779Z,1516406537.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:18.174Z,1516406538.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:18.188Z,1516406538.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:18.574Z,1516406538.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:18.587Z,1516406538.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:18.971Z,1516406538.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:18.985Z,1516406538.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:19.363Z,1516406539.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:19.381Z,1516406539.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:19.768Z,1516406539.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:19.782Z,1516406539.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:20.171Z,1516406540.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:20.185Z,1516406540.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:20.570Z,1516406540.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:20.591Z,1516406540.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:20.970Z,1516406540.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:20.991Z,1516406540.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:21.366Z,1516406541.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:21.380Z,1516406541.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:21.763Z,1516406541.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:21.777Z,1516406541.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:22.170Z,1516406542.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:22.184Z,1516406542.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:22.569Z,1516406542.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:22.591Z,1516406542.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:22.970Z,1516406542.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:22.984Z,1516406542.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:23.365Z,1516406543.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:23.379Z,1516406543.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:23.760Z,1516406543.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:23.782Z,1516406543.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:24.178Z,1516406544.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:24.192Z,1516406544.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:24.578Z,1516406544.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:24.592Z,1516406544.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:24.978Z,1516406544.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:24.992Z,1516406544.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:25.368Z,1516406545.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:25.382Z,1516406545.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:25.768Z,1516406545.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:25.782Z,1516406545.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:26.178Z,1516406546.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:26.192Z,1516406546.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:26.577Z,1516406546.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:26.591Z,1516406546.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:26.978Z,1516406546.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:26.992Z,1516406546.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:27.362Z,1516406547.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:27.379Z,1516406547.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:27.758Z,1516406547.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:27.780Z,1516406547.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:28.178Z,1516406548.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:28.192Z,1516406548.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:28.569Z,1516406548.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:28.587Z,1516406548.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:28.974Z,1516406548.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:28.988Z,1516406548.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:29.365Z,1516406549.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:29.379Z,1516406549.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:29.761Z,1516406549.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:29.779Z,1516406549.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:30.174Z,1516406550.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:30.188Z,1516406550.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:30.578Z,1516406550.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:30.591Z,1516406550.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:30.978Z,1516406550.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:30.992Z,1516406550.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:31.362Z,1516406551.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:31.381Z,1516406551.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:31.764Z,1516406551.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:31.778Z,1516406551.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:32.178Z,1516406552.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:32.192Z,1516406552.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:32.577Z,1516406552.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:32.595Z,1516406552.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:32.978Z,1516406552.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:32.992Z,1516406552.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:33.361Z,1516406553.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:33.383Z,1516406553.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:33.768Z,1516406553.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:33.783Z,1516406553.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:34.168Z,1516406554.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:34.182Z,1516406554.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:34.574Z,1516406554.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:34.589Z,1516406554.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:34.978Z,1516406554.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:34.995Z,1516406554.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:35.378Z,1516406555.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:35.392Z,1516406555.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:35.755Z,1516406555.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:35.787Z,1516406555.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:36.155Z,1516406556.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:36.180Z,1516406556.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:36.560Z,1516406556.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:36.586Z,1516406556.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:36.959Z,1516406556.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:36.985Z,1516406556.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:37.374Z,1516406557.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:37.388Z,1516406557.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:37.783Z,1516406557.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:37.797Z,1516406557.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:37.800Z,1516406557.800 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-19T23:57:37.5Z
2018-01-20T00:02:37.800Z,1516406557.800 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T00:02:37.800Z,1516406557.800 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T00:02:38.178Z,1516406558.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:38.193Z,1516406558.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:38.610Z,1516406558.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:38.631Z,1516406558.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:38.956Z,1516406558.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:38.990Z,1516406558.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:42.112Z,1516406562.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:42.136Z,1516406562.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:42.222Z,1516406562.222 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180119T210901/Courier0068.lzma
2018-01-20T00:02:42.243Z,1516406562.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:42.288Z,1516406562.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:42.594Z,1516406562.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:42.609Z,1516406562.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:42.963Z,1516406562.963 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0068.lzma.bak
2018-01-20T00:02:42.963Z,1516406562.963 [DataOverHttps](INFO): SBD MOMSN=7725116
2018-01-20T00:02:43.014Z,1516406563.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:43.036Z,1516406563.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:43.498Z,1516406563.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:43.512Z,1516406563.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:43.790Z,1516406563.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:43.810Z,1516406563.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:46.881Z,1516406566.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:46.896Z,1516406566.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:46.995Z,1516406566.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:47.034Z,1516406567.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:47.363Z,1516406567.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:47.388Z,1516406567.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:47.766Z,1516406567.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:47.790Z,1516406567.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:48.158Z,1516406568.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:48.190Z,1516406568.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:48.550Z,1516406568.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:48.564Z,1516406568.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:51.639Z,1516406571.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:51.653Z,1516406571.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:51.734Z,1516406571.734 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180119T210901/Express0069.lzma
2018-01-20T00:02:51.755Z,1516406571.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:51.769Z,1516406571.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:52.118Z,1516406572.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:52.142Z,1516406572.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:56.075Z,1516406576.075 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0069.lzma.bak
2018-01-20T00:02:56.075Z,1516406576.075 [DataOverHttps](INFO): SBD MOMSN=7725119
2018-01-20T00:02:56.115Z,1516406576.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:56.150Z,1516406576.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:56.354Z,1516406576.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:56.399Z,1516406576.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:56.402Z,1516406576.402 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T00:02:56.402Z,1516406576.402 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T00:02:56.402Z,1516406576.402 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T00:02:56.602Z,1516406576.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:56.620Z,1516406576.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:59.704Z,1516406579.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:59.718Z,1516406579.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:02:59.816Z,1516406579.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:02:59.858Z,1516406579.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:00.182Z,1516406580.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:00.210Z,1516406580.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:00.597Z,1516406580.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:00.611Z,1516406580.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:00.983Z,1516406580.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:01.071Z,1516406581.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:01.371Z,1516406581.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:01.404Z,1516406581.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:01.772Z,1516406581.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:01.809Z,1516406581.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:02.164Z,1516406582.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:02.179Z,1516406582.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:02.578Z,1516406582.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:02.601Z,1516406582.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:02.982Z,1516406582.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:03.006Z,1516406583.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:03.370Z,1516406583.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:03.384Z,1516406583.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:03.771Z,1516406583.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:03.807Z,1516406583.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:04.171Z,1516406584.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:04.185Z,1516406584.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:04.573Z,1516406584.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:04.587Z,1516406584.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:04.969Z,1516406584.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:04.983Z,1516406584.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:05.378Z,1516406585.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:05.392Z,1516406585.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:05.774Z,1516406585.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:05.788Z,1516406585.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:06.186Z,1516406586.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:06.215Z,1516406586.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:06.571Z,1516406586.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:06.585Z,1516406586.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:06.967Z,1516406586.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:06.981Z,1516406586.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:07.373Z,1516406587.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:07.387Z,1516406587.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:07.774Z,1516406587.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:07.795Z,1516406587.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:08.171Z,1516406588.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:08.191Z,1516406588.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:08.586Z,1516406588.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:08.616Z,1516406588.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:08.982Z,1516406588.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:09.015Z,1516406589.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:09.374Z,1516406589.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:09.388Z,1516406589.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:09.773Z,1516406589.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:09.787Z,1516406589.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:10.168Z,1516406590.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:10.206Z,1516406590.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:10.568Z,1516406590.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:10.582Z,1516406590.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:10.973Z,1516406590.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:10.987Z,1516406590.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:11.386Z,1516406591.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:11.416Z,1516406591.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:11.770Z,1516406591.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:11.784Z,1516406591.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:12.178Z,1516406592.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:12.192Z,1516406592.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:12.573Z,1516406592.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:12.588Z,1516406592.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:12.967Z,1516406592.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:12.981Z,1516406592.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:13.368Z,1516406593.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:13.387Z,1516406593.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:13.774Z,1516406593.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:13.788Z,1516406593.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:14.173Z,1516406594.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:14.187Z,1516406594.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:14.578Z,1516406594.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:14.592Z,1516406594.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:14.986Z,1516406594.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:15.016Z,1516406595.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:15.373Z,1516406595.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:15.387Z,1516406595.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:15.769Z,1516406595.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:15.788Z,1516406595.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:16.171Z,1516406596.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:16.189Z,1516406596.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:16.576Z,1516406596.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:16.591Z,1516406596.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:16.971Z,1516406596.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:16.985Z,1516406596.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:17.382Z,1516406597.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:17.399Z,1516406597.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:17.782Z,1516406597.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:17.796Z,1516406597.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:18.181Z,1516406598.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:18.199Z,1516406598.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:18.573Z,1516406598.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:18.594Z,1516406598.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:18.975Z,1516406598.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:18.990Z,1516406598.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:19.372Z,1516406599.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:19.386Z,1516406599.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:19.770Z,1516406599.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:19.791Z,1516406599.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:20.171Z,1516406600.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:20.191Z,1516406600.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:20.581Z,1516406600.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:20.595Z,1516406600.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:20.982Z,1516406600.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:20.996Z,1516406600.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:21.382Z,1516406601.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:21.396Z,1516406601.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:21.763Z,1516406601.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:21.795Z,1516406601.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:22.167Z,1516406602.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:22.199Z,1516406602.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:22.564Z,1516406602.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:22.594Z,1516406602.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:22.966Z,1516406602.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:22.999Z,1516406602.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:23.386Z,1516406603.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:23.406Z,1516406603.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:23.790Z,1516406603.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:23.811Z,1516406603.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:24.174Z,1516406604.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:24.208Z,1516406604.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:24.568Z,1516406604.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:24.603Z,1516406604.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:24.968Z,1516406604.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:25.002Z,1516406605.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:25.370Z,1516406605.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:25.384Z,1516406605.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:25.768Z,1516406605.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:25.783Z,1516406605.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:26.171Z,1516406606.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:26.191Z,1516406606.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:26.583Z,1516406606.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:26.613Z,1516406606.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:26.991Z,1516406606.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:27.021Z,1516406607.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:27.374Z,1516406607.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:27.388Z,1516406607.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:27.774Z,1516406607.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:27.788Z,1516406607.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:28.173Z,1516406608.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:28.187Z,1516406608.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:28.574Z,1516406608.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:28.588Z,1516406608.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:28.974Z,1516406608.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:28.988Z,1516406608.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:29.374Z,1516406609.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:29.388Z,1516406609.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:29.787Z,1516406609.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:29.817Z,1516406609.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:30.178Z,1516406610.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:30.193Z,1516406610.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:30.576Z,1516406610.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:30.590Z,1516406610.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:30.975Z,1516406610.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:30.990Z,1516406610.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:31.375Z,1516406611.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:31.389Z,1516406611.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:31.776Z,1516406611.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:31.790Z,1516406611.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:32.178Z,1516406612.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:32.279Z,1516406612.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:32.606Z,1516406612.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:32.627Z,1516406612.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:32.993Z,1516406612.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:33.007Z,1516406613.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:33.382Z,1516406613.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:33.411Z,1516406613.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:33.775Z,1516406613.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:33.804Z,1516406613.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:34.169Z,1516406614.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:34.249Z,1516406614.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:34.573Z,1516406614.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:34.603Z,1516406614.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:34.971Z,1516406614.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:34.985Z,1516406614.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:35.386Z,1516406615.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:35.411Z,1516406615.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:35.786Z,1516406615.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:35.809Z,1516406615.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:36.186Z,1516406616.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:36.207Z,1516406616.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:36.575Z,1516406616.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:36.589Z,1516406616.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:36.969Z,1516406616.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:36.984Z,1516406616.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:37.373Z,1516406617.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:37.387Z,1516406617.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:37.773Z,1516406617.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:37.786Z,1516406617.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:38.174Z,1516406618.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:38.188Z,1516406618.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:38.586Z,1516406618.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:38.614Z,1516406618.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:38.982Z,1516406618.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:38.996Z,1516406618.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:39.383Z,1516406619.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:39.417Z,1516406619.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:39.774Z,1516406619.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:39.789Z,1516406619.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:40.172Z,1516406620.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:40.186Z,1516406620.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:40.573Z,1516406620.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:40.595Z,1516406620.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:40.979Z,1516406620.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:40.999Z,1516406620.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:41.381Z,1516406621.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:41.450Z,1516406621.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:41.783Z,1516406621.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:41.798Z,1516406621.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:42.192Z,1516406622.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:42.228Z,1516406622.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:42.578Z,1516406622.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:42.634Z,1516406622.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:42.977Z,1516406622.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:42.996Z,1516406622.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:43.372Z,1516406623.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:43.398Z,1516406623.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:43.764Z,1516406623.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:43.796Z,1516406623.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:44.170Z,1516406624.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:44.196Z,1516406624.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:44.599Z,1516406624.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:44.642Z,1516406624.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:44.989Z,1516406624.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:45.038Z,1516406625.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:45.385Z,1516406625.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:45.407Z,1516406625.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:45.766Z,1516406625.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:45.802Z,1516406625.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:46.168Z,1516406626.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:46.219Z,1516406626.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:46.593Z,1516406626.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:46.616Z,1516406626.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:46.966Z,1516406626.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:47.003Z,1516406627.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:47.388Z,1516406627.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:47.458Z,1516406627.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:47.793Z,1516406627.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:47.833Z,1516406627.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:48.197Z,1516406628.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:48.219Z,1516406628.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:48.566Z,1516406628.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:48.644Z,1516406628.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:48.994Z,1516406628.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:49.012Z,1516406629.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:49.371Z,1516406629.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:49.415Z,1516406629.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:49.773Z,1516406629.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:49.821Z,1516406629.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:50.165Z,1516406630.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:50.226Z,1516406630.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:50.604Z,1516406630.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:50.635Z,1516406630.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:50.982Z,1516406630.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:51.024Z,1516406631.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:51.378Z,1516406631.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:51.407Z,1516406631.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:51.774Z,1516406631.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:51.811Z,1516406631.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:52.165Z,1516406632.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:52.246Z,1516406632.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:52.565Z,1516406632.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:52.593Z,1516406632.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:52.965Z,1516406632.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:52.998Z,1516406632.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:53.391Z,1516406633.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:53.405Z,1516406633.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:53.794Z,1516406633.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:53.808Z,1516406633.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:54.185Z,1516406634.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:54.199Z,1516406634.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:54.561Z,1516406634.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:54.597Z,1516406634.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:54.970Z,1516406634.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:54.995Z,1516406634.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:55.363Z,1516406635.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:55.399Z,1516406635.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:55.764Z,1516406635.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:55.802Z,1516406635.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:56.165Z,1516406636.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:56.192Z,1516406636.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:56.578Z,1516406636.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:56.600Z,1516406636.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:03:56.985Z,1516406636.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:03:57.007Z,1516406637.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:00.079Z,1516406640.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:00.094Z,1516406640.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:00.202Z,1516406640.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:00.216Z,1516406640.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:00.552Z,1516406640.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:00.594Z,1516406640.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:00.952Z,1516406640.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:00.971Z,1516406640.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:01.354Z,1516406641.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:01.373Z,1516406641.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:01.754Z,1516406641.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:01.768Z,1516406641.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:02.158Z,1516406642.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:02.197Z,1516406642.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:02.554Z,1516406642.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:02.569Z,1516406642.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:02.949Z,1516406642.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:02.967Z,1516406642.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:03.360Z,1516406643.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:03.374Z,1516406643.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:03.754Z,1516406643.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:03.772Z,1516406643.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:04.162Z,1516406644.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:04.180Z,1516406644.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:04.555Z,1516406644.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:04.573Z,1516406644.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:04.952Z,1516406644.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:04.967Z,1516406644.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:05.362Z,1516406645.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:05.376Z,1516406645.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:05.759Z,1516406645.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:05.774Z,1516406645.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:06.162Z,1516406646.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:06.180Z,1516406646.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:06.554Z,1516406646.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:06.568Z,1516406646.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:06.949Z,1516406646.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:06.963Z,1516406646.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:07.362Z,1516406647.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:07.376Z,1516406647.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:07.761Z,1516406647.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:07.779Z,1516406647.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:08.154Z,1516406648.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:08.168Z,1516406648.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:08.537Z,1516406648.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:08.571Z,1516406648.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:08.940Z,1516406648.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:08.966Z,1516406648.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:09.350Z,1516406649.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:09.379Z,1516406649.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:09.759Z,1516406649.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:09.773Z,1516406649.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:10.169Z,1516406650.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:10.183Z,1516406650.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:10.183Z,1516406650.183 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-01-20T00:04:10.183Z,1516406650.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:04:10.185Z,1516406650.185 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:10.185Z,1516406650.185 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-01-20T00:04:10.186Z,1516406650.186 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:04:10.187Z,1516406650.187 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:10.187Z,1516406650.187 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 58
2018-01-20T00:04:10.187Z,1516406650.187 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:04:10.222Z,1516406650.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:04:10.222Z,1516406650.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:04:10.223Z,1516406650.223 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:04:10.541Z,1516406650.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:10.591Z,1516406650.591 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:04:10.591Z,1516406650.591 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-01-20T00:04:10.591Z,1516406650.591 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:04:10.591Z,1516406650.591 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-01-20T00:04:10.592Z,1516406650.592 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:04:10.592Z,1516406650.592 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 58
2018-01-20T00:04:10.944Z,1516406650.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:10.976Z,1516406650.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:04:10.976Z,1516406650.976 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:04:10.977Z,1516406650.977 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:04:10.978Z,1516406650.978 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:04:10.978Z,1516406650.978 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:04:10.979Z,1516406650.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:04:10.979Z,1516406650.979 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:04:10.980Z,1516406650.980 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:04:10.981Z,1516406650.981 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:04:11.369Z,1516406651.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:11.383Z,1516406651.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:04:11.383Z,1516406651.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:11.754Z,1516406651.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:11.785Z,1516406651.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:04:11.786Z,1516406651.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:12.162Z,1516406652.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:12.180Z,1516406652.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:04:12.181Z,1516406652.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:12.549Z,1516406652.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:12.580Z,1516406652.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:04:12.585Z,1516406652.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:12.948Z,1516406652.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:12.985Z,1516406652.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:04:12.986Z,1516406652.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:13.355Z,1516406653.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:13.378Z,1516406653.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:04:13.379Z,1516406653.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:13.769Z,1516406653.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:13.782Z,1516406653.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:04:13.783Z,1516406653.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:14.158Z,1516406654.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:14.185Z,1516406654.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:04:14.186Z,1516406654.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:14.546Z,1516406654.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:14.560Z,1516406654.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:04:14.560Z,1516406654.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:14.948Z,1516406654.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:14.961Z,1516406654.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:04:14.962Z,1516406654.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:15.362Z,1516406655.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:15.387Z,1516406655.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:04:15.389Z,1516406655.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:15.762Z,1516406655.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:15.789Z,1516406655.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:04:15.790Z,1516406655.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:16.158Z,1516406656.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:16.188Z,1516406656.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:04:16.193Z,1516406656.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:16.550Z,1516406656.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:16.563Z,1516406656.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:04:16.564Z,1516406656.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:16.949Z,1516406656.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:16.963Z,1516406656.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:04:16.964Z,1516406656.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:17.350Z,1516406657.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:17.364Z,1516406657.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:04:17.365Z,1516406657.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:17.750Z,1516406657.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:17.770Z,1516406657.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:04:17.771Z,1516406657.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:18.162Z,1516406658.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:18.176Z,1516406658.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:04:18.212Z,1516406658.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:18.553Z,1516406658.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:18.567Z,1516406658.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:04:18.567Z,1516406658.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:18.945Z,1516406658.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:18.959Z,1516406658.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:04:18.960Z,1516406658.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:19.357Z,1516406659.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:19.371Z,1516406659.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:04:19.371Z,1516406659.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:19.757Z,1516406659.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:19.778Z,1516406659.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:04:19.779Z,1516406659.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:20.158Z,1516406660.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:20.171Z,1516406660.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:04:20.172Z,1516406660.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:20.553Z,1516406660.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:20.567Z,1516406660.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:04:20.568Z,1516406660.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:20.948Z,1516406660.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:20.962Z,1516406660.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:04:20.963Z,1516406660.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:21.355Z,1516406661.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:21.368Z,1516406661.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:04:21.369Z,1516406661.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:21.756Z,1516406661.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:21.782Z,1516406661.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:04:21.783Z,1516406661.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:22.162Z,1516406662.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:22.175Z,1516406662.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:04:22.176Z,1516406662.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:22.546Z,1516406662.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:22.575Z,1516406662.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:04:22.576Z,1516406662.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:22.952Z,1516406662.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:22.966Z,1516406662.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T00:04:22.967Z,1516406662.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:23.358Z,1516406663.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:23.372Z,1516406663.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:04:23.373Z,1516406663.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:23.759Z,1516406663.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:23.778Z,1516406663.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:04:23.779Z,1516406663.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:24.162Z,1516406664.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:24.176Z,1516406664.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:04:24.177Z,1516406664.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:24.549Z,1516406664.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:24.563Z,1516406664.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:04:24.564Z,1516406664.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:24.935Z,1516406664.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:24.970Z,1516406664.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:04:24.971Z,1516406664.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:25.362Z,1516406665.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:25.376Z,1516406665.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:04:25.377Z,1516406665.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:25.762Z,1516406665.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:25.776Z,1516406665.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:04:25.777Z,1516406665.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:26.159Z,1516406666.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:26.172Z,1516406666.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:04:26.173Z,1516406666.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:26.548Z,1516406666.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:26.567Z,1516406666.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:04:26.568Z,1516406666.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:26.943Z,1516406666.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:26.965Z,1516406666.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:04:26.966Z,1516406666.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:27.355Z,1516406667.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:27.369Z,1516406667.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:04:27.370Z,1516406667.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:27.761Z,1516406667.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:27.775Z,1516406667.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:04:27.776Z,1516406667.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:28.158Z,1516406668.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:28.172Z,1516406668.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:04:28.173Z,1516406668.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:28.546Z,1516406668.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:28.575Z,1516406668.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:04:28.576Z,1516406668.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:28.948Z,1516406668.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:28.966Z,1516406668.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:04:28.967Z,1516406668.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:29.358Z,1516406669.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:29.372Z,1516406669.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:04:29.373Z,1516406669.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:29.762Z,1516406669.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:29.775Z,1516406669.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:04:29.776Z,1516406669.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:30.162Z,1516406670.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:30.176Z,1516406670.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T00:04:30.176Z,1516406670.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:30.548Z,1516406670.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:30.567Z,1516406670.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:30.948Z,1516406670.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:30.962Z,1516406670.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:31.352Z,1516406671.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:31.366Z,1516406671.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:31.755Z,1516406671.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:31.781Z,1516406671.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:32.159Z,1516406672.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:32.178Z,1516406672.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:32.562Z,1516406672.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:32.576Z,1516406672.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:32.940Z,1516406672.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:32.971Z,1516406672.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:33.353Z,1516406673.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:33.366Z,1516406673.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:33.754Z,1516406673.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:33.768Z,1516406673.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:34.140Z,1516406674.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:34.171Z,1516406674.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:34.563Z,1516406674.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:34.582Z,1516406674.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:34.963Z,1516406674.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:34.977Z,1516406674.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:35.359Z,1516406675.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:35.373Z,1516406675.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:35.752Z,1516406675.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:35.766Z,1516406675.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:36.154Z,1516406676.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:36.168Z,1516406676.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:36.549Z,1516406676.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:36.571Z,1516406676.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:36.955Z,1516406676.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:36.968Z,1516406676.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:37.338Z,1516406677.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:37.364Z,1516406677.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:37.764Z,1516406677.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:37.778Z,1516406677.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:38.160Z,1516406678.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:38.175Z,1516406678.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:38.550Z,1516406678.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:38.579Z,1516406678.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:38.944Z,1516406678.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:38.970Z,1516406678.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:39.340Z,1516406679.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:39.373Z,1516406679.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:39.744Z,1516406679.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:39.771Z,1516406679.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:40.141Z,1516406680.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:40.172Z,1516406680.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:40.560Z,1516406680.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:40.575Z,1516406680.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:40.958Z,1516406680.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:40.976Z,1516406680.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:41.354Z,1516406681.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:41.377Z,1516406681.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:41.735Z,1516406681.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:41.773Z,1516406681.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:42.145Z,1516406682.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:42.171Z,1516406682.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:42.540Z,1516406682.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:42.575Z,1516406682.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:42.937Z,1516406682.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:42.971Z,1516406682.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:43.336Z,1516406683.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:43.350Z,1516406683.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:43.750Z,1516406683.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:43.777Z,1516406683.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:44.150Z,1516406684.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:44.184Z,1516406684.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:44.550Z,1516406684.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:44.576Z,1516406684.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:44.940Z,1516406684.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:44.974Z,1516406684.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:45.348Z,1516406685.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:45.383Z,1516406685.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:45.742Z,1516406685.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:45.756Z,1516406685.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:46.148Z,1516406686.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:46.162Z,1516406686.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:46.561Z,1516406686.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:46.590Z,1516406686.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:46.962Z,1516406686.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:46.985Z,1516406686.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:47.358Z,1516406687.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:47.388Z,1516406687.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:47.747Z,1516406687.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:47.772Z,1516406687.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:48.150Z,1516406688.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:48.164Z,1516406688.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:48.550Z,1516406688.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:48.564Z,1516406688.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:48.946Z,1516406688.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:48.960Z,1516406688.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:49.344Z,1516406689.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:49.362Z,1516406689.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:49.754Z,1516406689.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:49.768Z,1516406689.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:50.151Z,1516406690.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:50.164Z,1516406690.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:50.551Z,1516406690.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:50.565Z,1516406690.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:50.951Z,1516406690.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:50.992Z,1516406690.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:51.345Z,1516406691.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:51.359Z,1516406691.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:51.751Z,1516406691.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:51.766Z,1516406691.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:52.145Z,1516406692.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:52.171Z,1516406692.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:52.562Z,1516406692.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:52.576Z,1516406692.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:52.950Z,1516406692.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:52.964Z,1516406692.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:53.350Z,1516406693.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:53.364Z,1516406693.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:53.742Z,1516406693.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:53.768Z,1516406693.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:54.148Z,1516406694.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:54.163Z,1516406694.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:54.543Z,1516406694.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:54.565Z,1516406694.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:54.953Z,1516406694.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:54.967Z,1516406694.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:55.346Z,1516406695.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:55.360Z,1516406695.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:55.758Z,1516406695.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:55.779Z,1516406695.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:56.157Z,1516406696.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:56.171Z,1516406696.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:56.558Z,1516406696.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:56.579Z,1516406696.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:56.955Z,1516406696.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:56.973Z,1516406696.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:04:57.346Z,1516406697.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:04:57.360Z,1516406697.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:00.454Z,1516406700.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:00.469Z,1516406700.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:00.575Z,1516406700.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:00.611Z,1516406700.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:00.935Z,1516406700.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:00.963Z,1516406700.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:01.345Z,1516406701.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:01.359Z,1516406701.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:01.735Z,1516406701.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:01.763Z,1516406701.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:02.123Z,1516406702.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:02.159Z,1516406702.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:02.523Z,1516406702.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:02.561Z,1516406702.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:02.918Z,1516406702.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:02.932Z,1516406702.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:03.323Z,1516406703.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:03.339Z,1516406703.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:03.734Z,1516406703.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:03.767Z,1516406703.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:04.139Z,1516406704.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:04.162Z,1516406704.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:04.535Z,1516406704.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:04.565Z,1516406704.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:04.923Z,1516406704.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:04.938Z,1516406704.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:05.323Z,1516406705.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:05.339Z,1516406705.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:05.721Z,1516406705.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:05.736Z,1516406705.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:06.120Z,1516406706.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:06.135Z,1516406706.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:06.539Z,1516406706.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:06.560Z,1516406706.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:06.934Z,1516406706.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:06.960Z,1516406706.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:07.335Z,1516406707.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:07.348Z,1516406707.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:07.720Z,1516406707.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:07.735Z,1516406707.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:08.122Z,1516406708.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:08.137Z,1516406708.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:08.525Z,1516406708.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:08.539Z,1516406708.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:08.922Z,1516406708.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:08.937Z,1516406708.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:09.325Z,1516406709.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:09.340Z,1516406709.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:09.738Z,1516406709.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:09.769Z,1516406709.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:10.134Z,1516406710.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:10.148Z,1516406710.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:10.539Z,1516406710.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:10.569Z,1516406710.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:10.928Z,1516406710.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:10.943Z,1516406710.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:11.321Z,1516406711.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:11.336Z,1516406711.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:11.730Z,1516406711.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:11.751Z,1516406711.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:12.128Z,1516406712.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:12.143Z,1516406712.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:12.525Z,1516406712.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:12.540Z,1516406712.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:12.938Z,1516406712.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:12.959Z,1516406712.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:13.340Z,1516406713.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:13.353Z,1516406713.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:13.733Z,1516406713.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:13.785Z,1516406713.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:14.115Z,1516406714.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:14.141Z,1516406714.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:14.515Z,1516406714.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:14.551Z,1516406714.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:14.914Z,1516406714.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:14.944Z,1516406714.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:15.318Z,1516406715.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:15.351Z,1516406715.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:15.737Z,1516406715.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:15.751Z,1516406715.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:16.143Z,1516406716.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:16.157Z,1516406716.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:16.538Z,1516406716.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:16.556Z,1516406716.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:16.920Z,1516406716.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:16.948Z,1516406716.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:17.310Z,1516406717.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:17.324Z,1516406717.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:17.721Z,1516406717.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:17.751Z,1516406717.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:18.120Z,1516406718.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:18.159Z,1516406718.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:18.523Z,1516406718.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:18.554Z,1516406718.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:18.902Z,1516406718.902 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T00:05:18.902Z,1516406718.902 [NAL9602] Data Fault, FailCount= 1
2018-01-20T00:05:18.902Z,1516406718.902 [NAL9602](ERROR): Data Fault
2018-01-20T00:05:18.919Z,1516406718.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:18.935Z,1516406718.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:18.981Z,1516406718.981 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T00:05:19.306Z,1516406719.306 [NAL9602](INFO): Powering down
2018-01-20T00:05:19.324Z,1516406719.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:19.339Z,1516406719.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:19.716Z,1516406719.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:19.731Z,1516406719.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:20.127Z,1516406720.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:20.167Z,1516406720.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:20.180Z,1516406720.180 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T00:05:20.180Z,1516406720.180 [NAL9602] No Fault, FailCount= 1
2018-01-20T00:05:20.515Z,1516406720.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:20.542Z,1516406720.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:20.916Z,1516406720.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:20.930Z,1516406720.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:21.320Z,1516406721.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:21.335Z,1516406721.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:21.723Z,1516406721.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:21.737Z,1516406721.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:22.124Z,1516406722.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:22.139Z,1516406722.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:22.524Z,1516406722.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:22.539Z,1516406722.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:22.920Z,1516406722.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:22.934Z,1516406722.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:23.318Z,1516406723.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:23.333Z,1516406723.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:23.721Z,1516406723.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:23.736Z,1516406723.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:24.119Z,1516406724.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:24.133Z,1516406724.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:24.518Z,1516406724.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:24.533Z,1516406724.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:24.921Z,1516406724.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:24.940Z,1516406724.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:25.318Z,1516406725.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:25.333Z,1516406725.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:25.719Z,1516406725.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:25.734Z,1516406725.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:26.120Z,1516406726.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:26.147Z,1516406726.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:26.524Z,1516406726.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:26.539Z,1516406726.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:26.916Z,1516406726.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:26.931Z,1516406726.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:27.318Z,1516406727.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:27.341Z,1516406727.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:27.726Z,1516406727.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:27.740Z,1516406727.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:28.126Z,1516406728.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:28.140Z,1516406728.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:28.522Z,1516406728.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:28.537Z,1516406728.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:28.918Z,1516406728.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:28.933Z,1516406728.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:29.316Z,1516406729.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:29.331Z,1516406729.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:29.721Z,1516406729.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:29.740Z,1516406729.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:30.119Z,1516406730.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:30.133Z,1516406730.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:30.519Z,1516406730.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:30.533Z,1516406730.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:30.928Z,1516406730.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:30.943Z,1516406730.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:31.326Z,1516406731.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:31.340Z,1516406731.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:31.720Z,1516406731.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:31.735Z,1516406731.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:32.121Z,1516406732.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:32.149Z,1516406732.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:32.526Z,1516406732.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:32.541Z,1516406732.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:32.920Z,1516406732.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:32.935Z,1516406732.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:33.322Z,1516406733.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:33.337Z,1516406733.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:33.718Z,1516406733.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:33.733Z,1516406733.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:34.118Z,1516406734.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:34.133Z,1516406734.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:34.521Z,1516406734.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:34.540Z,1516406734.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:34.921Z,1516406734.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:34.936Z,1516406734.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:35.320Z,1516406735.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:35.335Z,1516406735.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:35.717Z,1516406735.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:35.747Z,1516406735.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:36.126Z,1516406736.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:36.141Z,1516406736.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:36.512Z,1516406736.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:36.543Z,1516406736.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:36.926Z,1516406736.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:36.947Z,1516406736.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:37.327Z,1516406737.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:37.341Z,1516406737.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:37.712Z,1516406737.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:37.743Z,1516406737.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:38.115Z,1516406738.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:38.147Z,1516406738.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:38.526Z,1516406738.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:38.541Z,1516406738.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:38.912Z,1516406738.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:38.947Z,1516406738.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:39.319Z,1516406739.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:39.345Z,1516406739.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:39.711Z,1516406739.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:39.743Z,1516406739.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:40.119Z,1516406740.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:40.145Z,1516406740.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:40.519Z,1516406740.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:40.545Z,1516406740.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:40.911Z,1516406740.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:40.943Z,1516406740.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:41.308Z,1516406741.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:41.331Z,1516406741.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:41.719Z,1516406741.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:41.745Z,1516406741.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:42.111Z,1516406742.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:42.147Z,1516406742.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:42.512Z,1516406742.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:42.539Z,1516406742.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:42.915Z,1516406742.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:42.951Z,1516406742.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:43.311Z,1516406743.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:43.355Z,1516406743.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:43.707Z,1516406743.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:43.722Z,1516406743.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:44.114Z,1516406744.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:44.128Z,1516406744.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:44.519Z,1516406744.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:44.558Z,1516406744.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:44.908Z,1516406744.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:44.927Z,1516406744.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:45.323Z,1516406745.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:45.358Z,1516406745.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:45.723Z,1516406745.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:45.737Z,1516406745.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:46.124Z,1516406746.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:46.139Z,1516406746.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:46.524Z,1516406746.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:46.547Z,1516406746.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:46.923Z,1516406746.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:46.937Z,1516406746.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:47.321Z,1516406747.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:47.336Z,1516406747.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:47.721Z,1516406747.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:47.742Z,1516406747.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:48.120Z,1516406748.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:48.134Z,1516406748.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:48.521Z,1516406748.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:48.535Z,1516406748.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:48.925Z,1516406748.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:48.940Z,1516406748.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:49.324Z,1516406749.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:49.339Z,1516406749.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:49.695Z,1516406749.695 [NAL9602](INFO): Powering up NAL9602
2018-01-20T00:05:49.723Z,1516406749.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:49.747Z,1516406749.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:50.124Z,1516406750.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:50.139Z,1516406750.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:50.516Z,1516406750.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:50.545Z,1516406750.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:50.916Z,1516406750.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:50.931Z,1516406750.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:51.318Z,1516406751.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:51.332Z,1516406751.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:51.719Z,1516406751.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:51.733Z,1516406751.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:52.119Z,1516406752.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:52.134Z,1516406752.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:52.522Z,1516406752.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:52.537Z,1516406752.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:52.919Z,1516406752.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:52.933Z,1516406752.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:53.320Z,1516406753.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:53.335Z,1516406753.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:53.719Z,1516406753.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:53.733Z,1516406753.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:54.127Z,1516406754.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:54.141Z,1516406754.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:54.516Z,1516406754.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:54.531Z,1516406754.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:54.923Z,1516406754.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:54.943Z,1516406754.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:55.326Z,1516406755.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:55.340Z,1516406755.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:55.721Z,1516406755.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:55.736Z,1516406755.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:56.124Z,1516406756.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:56.138Z,1516406756.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:56.526Z,1516406756.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:56.541Z,1516406756.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:56.917Z,1516406756.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:56.932Z,1516406756.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:57.327Z,1516406757.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:57.341Z,1516406757.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:05:57.728Z,1516406757.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:05:57.742Z,1516406757.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:00.814Z,1516406760.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:00.829Z,1516406760.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:00.939Z,1516406760.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:00.975Z,1516406760.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:01.270Z,1516406761.270 [NAL9602](INFO): NAL9602 initialized
2018-01-20T00:06:01.288Z,1516406761.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:01.327Z,1516406761.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:01.687Z,1516406761.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:01.701Z,1516406761.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:02.094Z,1516406762.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:02.108Z,1516406762.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:02.499Z,1516406762.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:02.533Z,1516406762.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:02.887Z,1516406762.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:02.901Z,1516406762.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:03.280Z,1516406763.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:03.299Z,1516406763.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:03.687Z,1516406763.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:03.707Z,1516406763.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:04.086Z,1516406764.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:04.100Z,1516406764.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:04.489Z,1516406764.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:04.503Z,1516406764.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:04.894Z,1516406764.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:04.908Z,1516406764.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:05.290Z,1516406765.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:05.310Z,1516406765.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:05.678Z,1516406765.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:05.692Z,1516406765.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:06.079Z,1516406766.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:06.106Z,1516406766.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:06.488Z,1516406766.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:06.501Z,1516406766.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:06.881Z,1516406766.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:06.895Z,1516406766.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:07.290Z,1516406767.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:07.309Z,1516406767.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:07.698Z,1516406767.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:07.711Z,1516406767.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:08.093Z,1516406768.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:08.107Z,1516406768.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:08.482Z,1516406768.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:08.500Z,1516406768.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:08.883Z,1516406768.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:08.896Z,1516406768.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:09.280Z,1516406769.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:09.299Z,1516406769.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:09.679Z,1516406769.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:09.709Z,1516406769.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:10.083Z,1516406770.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:10.097Z,1516406770.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:10.493Z,1516406770.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:10.508Z,1516406770.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:10.891Z,1516406770.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:10.911Z,1516406770.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:11.292Z,1516406771.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:11.306Z,1516406771.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:11.681Z,1516406771.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:11.695Z,1516406771.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:12.078Z,1516406772.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:12.100Z,1516406772.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:12.488Z,1516406772.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:12.501Z,1516406772.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:12.869Z,1516406772.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:12.903Z,1516406772.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:13.297Z,1516406773.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:13.319Z,1516406773.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:13.697Z,1516406773.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:13.710Z,1516406773.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:14.098Z,1516406774.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:14.112Z,1516406774.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:14.478Z,1516406774.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:14.500Z,1516406774.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:14.883Z,1516406774.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:14.902Z,1516406774.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:15.281Z,1516406775.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:15.299Z,1516406775.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:15.695Z,1516406775.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:15.715Z,1516406775.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:16.087Z,1516406776.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:16.101Z,1516406776.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:16.494Z,1516406776.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:16.508Z,1516406776.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:16.896Z,1516406776.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:16.915Z,1516406776.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:17.297Z,1516406777.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:17.314Z,1516406777.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:17.681Z,1516406777.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:17.707Z,1516406777.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:18.079Z,1516406778.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:18.104Z,1516406778.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:18.476Z,1516406778.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:18.501Z,1516406778.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:18.873Z,1516406778.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:18.907Z,1516406778.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:19.298Z,1516406779.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:19.312Z,1516406779.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:19.698Z,1516406779.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:19.711Z,1516406779.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:20.099Z,1516406780.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:20.113Z,1516406780.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:20.475Z,1516406780.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:20.507Z,1516406780.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:20.879Z,1516406780.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:20.911Z,1516406780.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:21.276Z,1516406781.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:21.298Z,1516406781.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:21.677Z,1516406781.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:21.691Z,1516406781.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:22.076Z,1516406782.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:22.089Z,1516406782.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:22.490Z,1516406782.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:22.516Z,1516406782.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:22.894Z,1516406782.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:22.918Z,1516406782.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:23.295Z,1516406783.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:23.316Z,1516406783.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:23.676Z,1516406783.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:23.691Z,1516406783.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:24.083Z,1516406784.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:24.119Z,1516406784.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:24.484Z,1516406784.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:24.498Z,1516406784.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:24.875Z,1516406784.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:24.890Z,1516406784.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:25.294Z,1516406785.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:25.324Z,1516406785.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:25.694Z,1516406785.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:25.726Z,1516406785.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:26.094Z,1516406786.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:26.128Z,1516406786.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:26.483Z,1516406786.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:26.503Z,1516406786.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:26.879Z,1516406786.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:26.898Z,1516406786.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:27.287Z,1516406787.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:27.301Z,1516406787.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:27.685Z,1516406787.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:27.707Z,1516406787.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:28.080Z,1516406788.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:28.094Z,1516406788.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:28.486Z,1516406788.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:28.501Z,1516406788.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:28.890Z,1516406788.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:28.904Z,1516406788.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:29.297Z,1516406789.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:29.311Z,1516406789.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:29.682Z,1516406789.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:29.696Z,1516406789.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:30.078Z,1516406790.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:30.107Z,1516406790.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:30.486Z,1516406790.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:30.500Z,1516406790.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:30.882Z,1516406790.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:30.896Z,1516406790.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:31.290Z,1516406791.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:31.304Z,1516406791.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:31.690Z,1516406791.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:31.704Z,1516406791.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:32.094Z,1516406792.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:32.115Z,1516406792.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:32.484Z,1516406792.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:32.503Z,1516406792.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:32.887Z,1516406792.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:32.901Z,1516406792.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:33.282Z,1516406793.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:33.296Z,1516406793.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:33.683Z,1516406793.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:33.702Z,1516406793.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:34.084Z,1516406794.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:34.097Z,1516406794.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:34.490Z,1516406794.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:34.505Z,1516406794.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:34.894Z,1516406794.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:34.908Z,1516406794.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:35.290Z,1516406795.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:35.310Z,1516406795.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:35.678Z,1516406795.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:35.692Z,1516406795.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:36.083Z,1516406796.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:36.098Z,1516406796.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:36.485Z,1516406796.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:36.499Z,1516406796.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:36.882Z,1516406796.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:36.896Z,1516406796.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:37.290Z,1516406797.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:37.304Z,1516406797.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:37.694Z,1516406797.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:37.707Z,1516406797.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:38.090Z,1516406798.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:38.104Z,1516406798.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:38.488Z,1516406798.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:38.502Z,1516406798.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:38.883Z,1516406798.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:38.899Z,1516406798.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:39.282Z,1516406799.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:39.302Z,1516406799.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:39.682Z,1516406799.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:39.709Z,1516406799.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:40.071Z,1516406800.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:40.097Z,1516406800.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:40.495Z,1516406800.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:40.509Z,1516406800.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:40.896Z,1516406800.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:40.919Z,1516406800.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:41.297Z,1516406801.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:41.318Z,1516406801.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:41.669Z,1516406801.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:41.703Z,1516406801.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:42.078Z,1516406802.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:42.100Z,1516406802.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:42.483Z,1516406802.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:42.502Z,1516406802.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:42.881Z,1516406802.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:42.899Z,1516406802.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:43.294Z,1516406803.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:43.308Z,1516406803.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:43.696Z,1516406803.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:43.714Z,1516406803.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:44.098Z,1516406804.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:44.112Z,1516406804.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:44.487Z,1516406804.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:44.507Z,1516406804.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:44.883Z,1516406804.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:44.902Z,1516406804.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:45.281Z,1516406805.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:45.299Z,1516406805.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:45.679Z,1516406805.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:45.701Z,1516406805.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:46.078Z,1516406806.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:46.114Z,1516406806.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:46.494Z,1516406806.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:46.508Z,1516406806.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:46.896Z,1516406806.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:46.915Z,1516406806.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:47.297Z,1516406807.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:47.318Z,1516406807.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:47.669Z,1516406807.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:47.699Z,1516406807.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:48.086Z,1516406808.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:48.104Z,1516406808.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:48.492Z,1516406808.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:48.506Z,1516406808.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:48.873Z,1516406808.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:48.895Z,1516406808.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:49.298Z,1516406809.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:49.319Z,1516406809.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:49.702Z,1516406809.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:49.716Z,1516406809.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:50.098Z,1516406810.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:50.112Z,1516406810.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:50.479Z,1516406810.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:50.504Z,1516406810.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:50.875Z,1516406810.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:50.907Z,1516406810.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:51.275Z,1516406811.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:51.289Z,1516406811.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:51.682Z,1516406811.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:51.696Z,1516406811.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:52.083Z,1516406812.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:52.103Z,1516406812.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:52.494Z,1516406812.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:52.508Z,1516406812.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:52.898Z,1516406812.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:52.912Z,1516406812.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:53.290Z,1516406813.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:53.304Z,1516406813.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:53.688Z,1516406813.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:53.702Z,1516406813.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:54.087Z,1516406814.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:54.107Z,1516406814.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:54.487Z,1516406814.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:54.507Z,1516406814.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:54.888Z,1516406814.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:54.903Z,1516406814.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:55.290Z,1516406815.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:55.304Z,1516406815.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:55.694Z,1516406815.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:55.708Z,1516406815.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:56.090Z,1516406816.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:56.104Z,1516406816.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:56.488Z,1516406816.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:56.502Z,1516406816.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:56.887Z,1516406816.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:56.907Z,1516406816.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:57.287Z,1516406817.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:57.302Z,1516406817.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:57.682Z,1516406817.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:57.701Z,1516406817.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:06:58.087Z,1516406818.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:06:58.101Z,1516406818.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:01.187Z,1516406821.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:01.201Z,1516406821.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:01.328Z,1516406821.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:01.344Z,1516406821.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:01.675Z,1516406821.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:01.689Z,1516406821.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:02.058Z,1516406822.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:02.092Z,1516406822.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:02.451Z,1516406822.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:02.465Z,1516406822.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:02.855Z,1516406822.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:02.898Z,1516406822.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:03.268Z,1516406823.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:03.293Z,1516406823.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:03.664Z,1516406823.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:03.692Z,1516406823.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:04.066Z,1516406824.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:04.087Z,1516406824.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:04.452Z,1516406824.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:04.491Z,1516406824.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:04.842Z,1516406824.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:04.870Z,1516406824.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:05.254Z,1516406825.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:05.275Z,1516406825.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:05.660Z,1516406825.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:05.674Z,1516406825.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:06.053Z,1516406826.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:06.094Z,1516406826.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:06.463Z,1516406826.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:06.480Z,1516406826.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:06.872Z,1516406826.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:06.906Z,1516406826.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:07.259Z,1516406827.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:07.275Z,1516406827.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:07.658Z,1516406827.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:07.698Z,1516406827.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:08.054Z,1516406828.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:08.071Z,1516406828.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:08.448Z,1516406828.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:08.476Z,1516406828.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:08.862Z,1516406828.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:08.883Z,1516406828.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:09.263Z,1516406829.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:09.301Z,1516406829.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:09.659Z,1516406829.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:09.687Z,1516406829.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:10.068Z,1516406830.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:10.087Z,1516406830.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:10.464Z,1516406830.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:10.478Z,1516406830.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:10.853Z,1516406830.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:10.890Z,1516406830.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:11.259Z,1516406831.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:11.282Z,1516406831.282 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:11.282Z,1516406831.282 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-01-20T00:07:11.282Z,1516406831.282 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:07:11.284Z,1516406831.284 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:11.284Z,1516406831.284 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-01-20T00:07:11.284Z,1516406831.284 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:07:11.286Z,1516406831.286 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:11.286Z,1516406831.286 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 59
2018-01-20T00:07:11.286Z,1516406831.286 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:07:11.326Z,1516406831.326 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:07:11.326Z,1516406831.326 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:07:11.326Z,1516406831.326 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:07:11.644Z,1516406831.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:11.692Z,1516406831.692 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:07:11.692Z,1516406831.692 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-01-20T00:07:11.692Z,1516406831.692 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:07:11.693Z,1516406831.693 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-01-20T00:07:11.693Z,1516406831.693 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:07:11.693Z,1516406831.693 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 59
2018-01-20T00:07:12.044Z,1516406832.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:12.078Z,1516406832.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:07:12.078Z,1516406832.078 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:07:12.079Z,1516406832.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:07:12.079Z,1516406832.079 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:07:12.079Z,1516406832.079 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:07:12.080Z,1516406832.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:07:12.080Z,1516406832.080 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:07:12.080Z,1516406832.080 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:07:12.085Z,1516406832.085 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:07:12.462Z,1516406832.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:12.491Z,1516406832.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:07:12.492Z,1516406832.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:12.876Z,1516406832.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:12.892Z,1516406832.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:07:12.893Z,1516406832.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:13.263Z,1516406833.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:13.299Z,1516406833.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:07:13.300Z,1516406833.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:13.652Z,1516406833.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:13.680Z,1516406833.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:07:13.681Z,1516406833.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:14.043Z,1516406834.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:14.079Z,1516406834.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:07:14.080Z,1516406834.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:14.452Z,1516406834.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:14.481Z,1516406834.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:07:14.482Z,1516406834.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:14.847Z,1516406834.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:14.880Z,1516406834.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:07:14.885Z,1516406834.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:15.254Z,1516406835.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:15.290Z,1516406835.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:07:15.291Z,1516406835.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:15.658Z,1516406835.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:15.700Z,1516406835.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:07:15.701Z,1516406835.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:16.070Z,1516406836.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:16.089Z,1516406836.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:07:16.090Z,1516406836.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:16.452Z,1516406836.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:16.487Z,1516406836.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:07:16.488Z,1516406836.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:16.842Z,1516406836.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:16.856Z,1516406836.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:07:16.856Z,1516406836.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:17.262Z,1516406837.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:17.287Z,1516406837.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:07:17.288Z,1516406837.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:17.662Z,1516406837.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:17.692Z,1516406837.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:07:17.692Z,1516406837.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:18.063Z,1516406838.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:18.091Z,1516406838.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:07:18.092Z,1516406838.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:18.448Z,1516406838.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:18.494Z,1516406838.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:07:18.495Z,1516406838.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:18.847Z,1516406838.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:18.861Z,1516406838.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:07:18.862Z,1516406838.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:19.262Z,1516406839.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:19.287Z,1516406839.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:07:19.289Z,1516406839.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:19.683Z,1516406839.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:19.697Z,1516406839.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:07:19.698Z,1516406839.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:20.080Z,1516406840.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:20.098Z,1516406840.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:07:20.099Z,1516406840.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:20.456Z,1516406840.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:20.490Z,1516406840.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:07:20.491Z,1516406840.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:20.859Z,1516406840.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:20.890Z,1516406840.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:07:20.891Z,1516406840.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:21.266Z,1516406841.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:21.298Z,1516406841.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:07:21.299Z,1516406841.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:21.662Z,1516406841.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:21.688Z,1516406841.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:07:21.689Z,1516406841.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:22.076Z,1516406842.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:22.108Z,1516406842.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:07:22.110Z,1516406842.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:22.460Z,1516406842.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:22.492Z,1516406842.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:07:22.493Z,1516406842.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:22.848Z,1516406842.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:22.862Z,1516406842.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:07:22.863Z,1516406842.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:23.266Z,1516406843.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:23.292Z,1516406843.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:07:23.293Z,1516406843.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:23.666Z,1516406843.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:23.691Z,1516406843.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:07:23.691Z,1516406843.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:24.066Z,1516406844.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:24.088Z,1516406844.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T00:07:24.090Z,1516406844.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:24.453Z,1516406844.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:24.467Z,1516406844.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:07:24.468Z,1516406844.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:24.853Z,1516406844.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:24.866Z,1516406844.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:07:24.867Z,1516406844.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:25.255Z,1516406845.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:25.269Z,1516406845.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:07:25.270Z,1516406845.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:25.666Z,1516406845.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:25.699Z,1516406845.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:07:25.701Z,1516406845.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:26.063Z,1516406846.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:26.098Z,1516406846.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:07:26.099Z,1516406846.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:26.459Z,1516406846.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:26.474Z,1516406846.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:07:26.475Z,1516406846.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:26.856Z,1516406846.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:26.869Z,1516406846.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:07:26.870Z,1516406846.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:27.262Z,1516406847.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:27.276Z,1516406847.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:07:27.277Z,1516406847.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:27.661Z,1516406847.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:27.682Z,1516406847.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:07:27.683Z,1516406847.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:28.064Z,1516406848.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:28.080Z,1516406848.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:07:28.082Z,1516406848.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:28.462Z,1516406848.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:28.475Z,1516406848.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:07:28.476Z,1516406848.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:28.846Z,1516406848.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:28.868Z,1516406848.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:07:28.869Z,1516406848.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:29.260Z,1516406849.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:29.286Z,1516406849.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:07:29.288Z,1516406849.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:29.670Z,1516406849.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:29.688Z,1516406849.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:07:29.689Z,1516406849.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:30.069Z,1516406850.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:30.083Z,1516406850.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:07:30.084Z,1516406850.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:30.454Z,1516406850.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:30.473Z,1516406850.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:07:30.474Z,1516406850.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:30.850Z,1516406850.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:30.876Z,1516406850.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:07:30.881Z,1516406850.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:31.270Z,1516406851.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:31.288Z,1516406851.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:31.671Z,1516406851.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:31.685Z,1516406851.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:32.063Z,1516406852.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:32.085Z,1516406852.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:32.448Z,1516406852.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:32.478Z,1516406852.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:32.847Z,1516406852.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:32.872Z,1516406852.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:33.267Z,1516406853.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:33.281Z,1516406853.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:33.665Z,1516406853.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:33.679Z,1516406853.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:34.066Z,1516406854.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:34.080Z,1516406854.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:34.448Z,1516406854.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:34.483Z,1516406854.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:34.851Z,1516406854.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:34.877Z,1516406854.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:35.275Z,1516406855.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:35.289Z,1516406855.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:35.666Z,1516406855.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:35.693Z,1516406855.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:36.071Z,1516406856.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:36.093Z,1516406856.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:36.449Z,1516406856.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:36.475Z,1516406856.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:36.853Z,1516406856.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:36.883Z,1516406856.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:37.259Z,1516406857.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:37.290Z,1516406857.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:37.667Z,1516406857.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:37.699Z,1516406857.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:38.071Z,1516406858.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:38.101Z,1516406858.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:38.455Z,1516406858.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:38.470Z,1516406858.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:38.852Z,1516406858.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:38.871Z,1516406858.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:39.254Z,1516406859.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:39.268Z,1516406859.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:39.670Z,1516406859.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:39.698Z,1516406859.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:40.062Z,1516406860.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:40.076Z,1516406860.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:40.457Z,1516406860.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:40.471Z,1516406860.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:40.851Z,1516406860.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:40.865Z,1516406860.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:41.258Z,1516406861.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:41.272Z,1516406861.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:41.658Z,1516406861.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:41.671Z,1516406861.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:42.055Z,1516406862.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:42.075Z,1516406862.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:42.457Z,1516406862.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:42.471Z,1516406862.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:42.852Z,1516406862.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:42.865Z,1516406862.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:43.260Z,1516406863.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:43.279Z,1516406863.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:43.666Z,1516406863.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:43.680Z,1516406863.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:44.062Z,1516406864.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:44.076Z,1516406864.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:44.454Z,1516406864.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:44.474Z,1516406864.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:44.860Z,1516406864.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:44.874Z,1516406864.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:45.263Z,1516406865.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:45.277Z,1516406865.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:45.666Z,1516406865.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:45.680Z,1516406865.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:46.065Z,1516406866.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:46.080Z,1516406866.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:46.458Z,1516406866.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:46.471Z,1516406866.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:46.852Z,1516406866.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:46.871Z,1516406866.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:47.261Z,1516406867.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:47.275Z,1516406867.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:47.664Z,1516406867.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:47.678Z,1516406867.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:48.064Z,1516406868.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:48.091Z,1516406868.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:48.471Z,1516406868.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:48.485Z,1516406868.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:48.843Z,1516406868.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:48.876Z,1516406868.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:49.259Z,1516406869.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:49.275Z,1516406869.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:49.648Z,1516406869.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:49.680Z,1516406869.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:50.044Z,1516406870.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:50.079Z,1516406870.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:50.463Z,1516406870.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:50.478Z,1516406870.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:50.870Z,1516406870.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:50.885Z,1516406870.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:51.257Z,1516406871.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:51.290Z,1516406871.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:51.660Z,1516406871.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:51.679Z,1516406871.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:52.047Z,1516406872.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:52.079Z,1516406872.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:52.443Z,1516406872.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:52.479Z,1516406872.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:52.860Z,1516406872.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:52.875Z,1516406872.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:53.246Z,1516406873.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:53.279Z,1516406873.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:53.660Z,1516406873.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:53.681Z,1516406873.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:54.066Z,1516406874.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:54.080Z,1516406874.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:54.466Z,1516406874.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:54.480Z,1516406874.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:54.843Z,1516406874.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:54.878Z,1516406874.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:55.259Z,1516406875.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:55.275Z,1516406875.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:55.648Z,1516406875.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:55.679Z,1516406875.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:56.060Z,1516406876.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:56.073Z,1516406876.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:56.469Z,1516406876.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:56.484Z,1516406876.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:56.866Z,1516406876.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:56.893Z,1516406876.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:56.896Z,1516406876.896 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T00:07:56.896Z,1516406876.896 [Default:CheckIn:C.Wait] Stopped
2018-01-20T00:07:56.896Z,1516406876.896 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T00:07:56.896Z,1516406876.896 [Default:CheckIn:D] Running Loop=1
2018-01-20T00:07:57.258Z,1516406877.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:57.282Z,1516406877.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:57.285Z,1516406877.285 [Default:CheckIn:D] Stopped
2018-01-20T00:07:57.285Z,1516406877.285 [Default:CheckIn:E] Running Loop=1
2018-01-20T00:07:57.651Z,1516406877.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:57.676Z,1516406877.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:57.680Z,1516406877.680 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 175.154329 min 
2018-01-20T00:07:57.680Z,1516406877.680 [Default:CheckIn:E] Stopped
2018-01-20T00:07:57.680Z,1516406877.680 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T00:07:57.680Z,1516406877.680 [Default:CheckIn] Stopped
2018-01-20T00:07:57.680Z,1516406877.680 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T00:07:57.681Z,1516406877.681 [Default:CheckIn](INFO): Running loop #18
2018-01-20T00:07:57.681Z,1516406877.681 [Default:CheckIn] Running Loop=18
2018-01-20T00:07:57.681Z,1516406877.681 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T00:07:57.681Z,1516406877.681 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T00:07:58.067Z,1516406878.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:58.083Z,1516406878.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:07:58.444Z,1516406878.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:07:58.475Z,1516406878.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:01.560Z,1516406881.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:01.579Z,1516406881.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:01.679Z,1516406881.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:01.720Z,1516406881.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:02.046Z,1516406882.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:02.076Z,1516406882.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:02.450Z,1516406882.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:02.480Z,1516406882.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:02.834Z,1516406882.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:02.848Z,1516406882.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:03.232Z,1516406883.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:03.251Z,1516406883.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:03.637Z,1516406883.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:03.651Z,1516406883.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:04.036Z,1516406884.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:04.051Z,1516406884.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:04.450Z,1516406884.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:04.478Z,1516406884.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:04.846Z,1516406884.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:04.860Z,1516406884.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:05.250Z,1516406885.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:05.264Z,1516406885.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:05.639Z,1516406885.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:05.659Z,1516406885.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:06.040Z,1516406886.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:06.054Z,1516406886.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:06.426Z,1516406886.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:06.453Z,1516406886.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:06.840Z,1516406886.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:06.855Z,1516406886.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:07.236Z,1516406887.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:07.250Z,1516406887.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:07.641Z,1516406887.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:07.655Z,1516406887.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:08.046Z,1516406888.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:08.060Z,1516406888.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:08.446Z,1516406888.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:08.460Z,1516406888.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:08.839Z,1516406888.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:08.859Z,1516406888.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:09.238Z,1516406889.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:09.252Z,1516406889.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:09.634Z,1516406889.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:09.661Z,1516406889.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:10.039Z,1516406890.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:10.059Z,1516406890.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:10.450Z,1516406890.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:10.464Z,1516406890.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:10.849Z,1516406890.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:10.863Z,1516406890.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:11.250Z,1516406891.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:11.264Z,1516406891.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:11.639Z,1516406891.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:11.659Z,1516406891.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:12.036Z,1516406892.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:12.056Z,1516406892.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:12.424Z,1516406892.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:12.455Z,1516406892.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:12.835Z,1516406892.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:12.854Z,1516406892.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:13.224Z,1516406893.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:13.256Z,1516406893.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:13.639Z,1516406893.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:13.668Z,1516406893.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:14.050Z,1516406894.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:14.071Z,1516406894.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:14.451Z,1516406894.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:14.465Z,1516406894.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:14.823Z,1516406894.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:14.855Z,1516406894.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:15.230Z,1516406895.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:15.253Z,1516406895.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:15.624Z,1516406895.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:15.663Z,1516406895.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:16.031Z,1516406896.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:16.057Z,1516406896.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:16.446Z,1516406896.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:16.461Z,1516406896.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:16.847Z,1516406896.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:16.862Z,1516406896.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:17.242Z,1516406897.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:17.263Z,1516406897.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:17.627Z,1516406897.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:17.652Z,1516406897.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:18.023Z,1516406898.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:18.059Z,1516406898.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:18.423Z,1516406898.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:18.455Z,1516406898.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:18.832Z,1516406898.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:18.857Z,1516406898.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:19.223Z,1516406899.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:19.259Z,1516406899.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:19.650Z,1516406899.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:19.664Z,1516406899.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:20.047Z,1516406900.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:20.067Z,1516406900.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:20.433Z,1516406900.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:20.459Z,1516406900.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:20.829Z,1516406900.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:20.858Z,1516406900.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:21.230Z,1516406901.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:21.255Z,1516406901.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:21.629Z,1516406901.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:21.659Z,1516406901.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:22.032Z,1516406902.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:22.058Z,1516406902.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:22.447Z,1516406902.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:22.461Z,1516406902.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:22.849Z,1516406902.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:22.870Z,1516406902.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:23.251Z,1516406903.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:23.266Z,1516406903.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:23.627Z,1516406903.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:23.663Z,1516406903.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:24.024Z,1516406904.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:24.062Z,1516406904.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:24.432Z,1516406904.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:24.459Z,1516406904.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:24.828Z,1516406904.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:24.860Z,1516406904.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:25.223Z,1516406905.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:25.261Z,1516406905.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:25.651Z,1516406905.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:25.671Z,1516406905.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:26.055Z,1516406906.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:26.070Z,1516406906.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:26.433Z,1516406906.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:26.464Z,1516406906.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:26.831Z,1516406906.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:26.857Z,1516406906.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:27.226Z,1516406907.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:27.265Z,1516406907.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:27.624Z,1516406907.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:27.660Z,1516406907.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:28.031Z,1516406908.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:28.056Z,1516406908.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:28.446Z,1516406908.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:28.460Z,1516406908.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:28.847Z,1516406908.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:28.862Z,1516406908.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:29.250Z,1516406909.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:29.264Z,1516406909.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:29.627Z,1516406909.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:29.658Z,1516406909.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:30.031Z,1516406910.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:30.057Z,1516406910.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:30.431Z,1516406910.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:30.456Z,1516406910.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:30.828Z,1516406910.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:30.858Z,1516406910.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:31.231Z,1516406911.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:31.264Z,1516406911.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:31.650Z,1516406911.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:31.664Z,1516406911.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:32.050Z,1516406912.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:32.064Z,1516406912.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:32.437Z,1516406912.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:32.463Z,1516406912.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:32.827Z,1516406912.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:32.862Z,1516406912.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:33.231Z,1516406913.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:33.262Z,1516406913.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:33.624Z,1516406913.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:33.667Z,1516406913.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:34.031Z,1516406914.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:34.062Z,1516406914.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:34.438Z,1516406914.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:34.463Z,1516406914.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:34.838Z,1516406914.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:34.867Z,1516406914.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:35.250Z,1516406915.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:35.264Z,1516406915.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:35.627Z,1516406915.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:35.662Z,1516406915.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:36.023Z,1516406916.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:36.066Z,1516406916.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:36.431Z,1516406916.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:36.462Z,1516406916.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:36.832Z,1516406916.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:36.862Z,1516406916.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:37.223Z,1516406917.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:37.266Z,1516406917.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:37.650Z,1516406917.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:37.664Z,1516406917.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:38.050Z,1516406918.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:38.064Z,1516406918.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:38.433Z,1516406918.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:38.467Z,1516406918.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:38.831Z,1516406918.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:38.862Z,1516406918.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:39.231Z,1516406919.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:39.262Z,1516406919.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:39.624Z,1516406919.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:39.666Z,1516406919.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:40.029Z,1516406920.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:40.059Z,1516406920.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:40.442Z,1516406920.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:40.467Z,1516406920.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:40.842Z,1516406920.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:40.868Z,1516406920.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:41.242Z,1516406921.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:41.267Z,1516406921.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:41.627Z,1516406921.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:41.663Z,1516406921.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:42.031Z,1516406922.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:42.045Z,1516406922.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:42.435Z,1516406922.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:42.471Z,1516406922.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:42.836Z,1516406922.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:42.850Z,1516406922.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:43.235Z,1516406923.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:43.249Z,1516406923.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:43.642Z,1516406923.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:43.656Z,1516406923.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:44.046Z,1516406924.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:44.060Z,1516406924.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:44.450Z,1516406924.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:44.464Z,1516406924.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:44.836Z,1516406924.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:44.850Z,1516406924.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:45.236Z,1516406925.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:45.255Z,1516406925.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:45.637Z,1516406925.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:45.650Z,1516406925.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:46.036Z,1516406926.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:46.055Z,1516406926.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:46.450Z,1516406926.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:46.464Z,1516406926.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:46.850Z,1516406926.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:46.864Z,1516406926.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:47.250Z,1516406927.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:47.264Z,1516406927.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:47.639Z,1516406927.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:47.654Z,1516406927.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:48.040Z,1516406928.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:48.054Z,1516406928.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:48.435Z,1516406928.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:48.450Z,1516406928.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:48.831Z,1516406928.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:48.861Z,1516406928.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:49.239Z,1516406929.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:49.253Z,1516406929.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:49.638Z,1516406929.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:49.660Z,1516406929.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:50.047Z,1516406930.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:50.064Z,1516406930.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:50.446Z,1516406930.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:50.459Z,1516406930.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:50.830Z,1516406930.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:50.852Z,1516406930.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:51.236Z,1516406931.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:51.250Z,1516406931.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:51.634Z,1516406931.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:51.647Z,1516406931.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:52.040Z,1516406932.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:52.059Z,1516406932.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:52.445Z,1516406932.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:52.459Z,1516406932.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:52.847Z,1516406932.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:52.860Z,1516406932.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:53.242Z,1516406933.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:53.256Z,1516406933.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:53.635Z,1516406933.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:53.650Z,1516406933.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:54.033Z,1516406934.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:54.051Z,1516406934.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:54.421Z,1516406934.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:54.455Z,1516406934.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:54.840Z,1516406934.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:54.855Z,1516406934.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:55.231Z,1516406935.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:55.245Z,1516406935.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:55.641Z,1516406935.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:55.655Z,1516406935.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:56.046Z,1516406936.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:56.060Z,1516406936.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:56.446Z,1516406936.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:56.466Z,1516406936.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:56.825Z,1516406936.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:56.848Z,1516406936.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:57.239Z,1516406937.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:57.254Z,1516406937.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:57.624Z,1516406937.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:57.659Z,1516406937.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:58.039Z,1516406938.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:58.055Z,1516406938.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:58.450Z,1516406938.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:58.464Z,1516406938.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:08:58.850Z,1516406938.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:08:58.863Z,1516406938.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:01.939Z,1516406941.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:01.954Z,1516406941.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:02.065Z,1516406942.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:02.099Z,1516406942.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:02.412Z,1516406942.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:02.447Z,1516406942.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:02.812Z,1516406942.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:02.826Z,1516406942.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:03.207Z,1516406943.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:03.222Z,1516406943.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:03.610Z,1516406943.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:03.625Z,1516406943.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:04.014Z,1516406944.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:04.028Z,1516406944.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:04.410Z,1516406944.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:04.424Z,1516406944.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:04.809Z,1516406944.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:04.823Z,1516406944.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:05.210Z,1516406945.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:05.251Z,1516406945.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:05.609Z,1516406945.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:05.623Z,1516406945.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:06.009Z,1516406946.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:06.039Z,1516406946.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:06.420Z,1516406946.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:06.446Z,1516406946.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:06.842Z,1516406946.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:06.873Z,1516406946.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:07.212Z,1516406947.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:07.278Z,1516406947.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:07.596Z,1516406947.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:07.638Z,1516406947.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:08.024Z,1516406948.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:08.099Z,1516406948.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:08.411Z,1516406948.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:08.443Z,1516406948.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:08.815Z,1516406948.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:08.846Z,1516406948.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:09.212Z,1516406949.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:09.242Z,1516406949.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:09.601Z,1516406949.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:09.624Z,1516406949.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:10.000Z,1516406950.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:10.030Z,1516406950.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:10.412Z,1516406950.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:10.442Z,1516406950.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:10.815Z,1516406950.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:10.843Z,1516406950.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:11.211Z,1516406951.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:11.254Z,1516406951.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:11.601Z,1516406951.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:11.670Z,1516406951.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:12.001Z,1516406952.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:12.023Z,1516406952.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:12.412Z,1516406952.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:12.439Z,1516406952.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:12.824Z,1516406952.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:12.847Z,1516406952.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:13.220Z,1516406953.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:13.243Z,1516406953.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:13.621Z,1516406953.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:13.662Z,1516406953.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:14.016Z,1516406954.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:14.064Z,1516406954.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:14.125Z,1516406954.125 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T00:09:14.421Z,1516406954.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:14.475Z,1516406954.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:14.825Z,1516406954.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:14.876Z,1516406954.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:15.220Z,1516406955.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:15.259Z,1516406955.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:15.610Z,1516406955.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:15.655Z,1516406955.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:16.009Z,1516406956.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:16.066Z,1516406956.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:16.420Z,1516406956.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:16.459Z,1516406956.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:16.824Z,1516406956.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:16.855Z,1516406956.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:17.220Z,1516406957.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:17.264Z,1516406957.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:17.607Z,1516406957.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:17.650Z,1516406957.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:18.009Z,1516406958.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:18.031Z,1516406958.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:18.414Z,1516406958.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:18.447Z,1516406958.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:18.823Z,1516406958.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:18.882Z,1516406958.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:19.228Z,1516406959.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:19.247Z,1516406959.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:19.608Z,1516406959.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:19.637Z,1516406959.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:20.001Z,1516406960.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:20.015Z,1516406960.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:20.418Z,1516406960.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:20.447Z,1516406960.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:20.818Z,1516406960.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:20.840Z,1516406960.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:21.214Z,1516406961.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:21.237Z,1516406961.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:21.608Z,1516406961.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:21.638Z,1516406961.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:22.007Z,1516406962.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:22.021Z,1516406962.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:22.414Z,1516406962.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:22.444Z,1516406962.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:22.822Z,1516406962.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:22.846Z,1516406962.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:23.210Z,1516406963.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:23.248Z,1516406963.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:23.605Z,1516406963.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:23.620Z,1516406963.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:24.007Z,1516406964.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:24.027Z,1516406964.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:24.407Z,1516406964.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:24.433Z,1516406964.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:24.822Z,1516406964.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:24.836Z,1516406964.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:25.210Z,1516406965.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:25.224Z,1516406965.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:25.605Z,1516406965.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:25.631Z,1516406965.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:26.010Z,1516406966.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:26.024Z,1516406966.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:26.407Z,1516406966.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:26.421Z,1516406966.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:26.821Z,1516406966.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:26.835Z,1516406966.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:27.210Z,1516406967.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:27.224Z,1516406967.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:27.611Z,1516406967.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:27.625Z,1516406967.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:28.009Z,1516406968.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:28.022Z,1516406968.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:28.405Z,1516406968.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:28.419Z,1516406968.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:28.810Z,1516406968.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:28.824Z,1516406968.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:29.208Z,1516406969.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:29.223Z,1516406969.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:29.610Z,1516406969.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:29.631Z,1516406969.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:30.014Z,1516406970.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:30.029Z,1516406970.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:30.422Z,1516406970.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:30.435Z,1516406970.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:30.800Z,1516406970.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:30.818Z,1516406970.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:31.208Z,1516406971.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:31.227Z,1516406971.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:31.608Z,1516406971.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:31.622Z,1516406971.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:32.009Z,1516406972.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:32.024Z,1516406972.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:32.405Z,1516406972.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:32.423Z,1516406972.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:32.814Z,1516406972.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:32.828Z,1516406972.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:33.218Z,1516406973.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:33.232Z,1516406973.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:33.614Z,1516406973.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:33.628Z,1516406973.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:34.012Z,1516406974.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:34.026Z,1516406974.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:34.404Z,1516406974.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:34.423Z,1516406974.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:34.812Z,1516406974.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:34.831Z,1516406974.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:35.210Z,1516406975.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:35.223Z,1516406975.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:35.613Z,1516406975.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:35.635Z,1516406975.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:36.018Z,1516406976.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:36.032Z,1516406976.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:36.415Z,1516406976.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:36.429Z,1516406976.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:36.806Z,1516406976.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:36.820Z,1516406976.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:37.212Z,1516406977.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:37.227Z,1516406977.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:37.612Z,1516406977.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:37.627Z,1516406977.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:38.013Z,1516406978.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:38.027Z,1516406978.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:38.406Z,1516406978.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:38.426Z,1516406978.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:38.815Z,1516406978.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:38.830Z,1516406978.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:39.219Z,1516406979.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:39.239Z,1516406979.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:39.617Z,1516406979.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:39.632Z,1516406979.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:40.012Z,1516406980.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:40.027Z,1516406980.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:40.405Z,1516406980.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:40.419Z,1516406980.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:40.806Z,1516406980.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:40.825Z,1516406980.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:41.202Z,1516406981.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:41.227Z,1516406981.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:41.613Z,1516406981.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:41.628Z,1516406981.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:42.016Z,1516406982.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:42.035Z,1516406982.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:42.417Z,1516406982.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:42.431Z,1516406982.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:42.805Z,1516406982.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:42.819Z,1516406982.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:43.202Z,1516406983.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:43.234Z,1516406983.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:43.602Z,1516406983.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:43.622Z,1516406983.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:44.002Z,1516406984.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:44.021Z,1516406984.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:44.405Z,1516406984.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:44.424Z,1516406984.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:44.834Z,1516406984.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:44.864Z,1516406984.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:45.218Z,1516406985.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:45.232Z,1516406985.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:45.617Z,1516406985.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:45.631Z,1516406985.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:46.012Z,1516406986.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:46.026Z,1516406986.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:46.405Z,1516406986.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:46.419Z,1516406986.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:46.817Z,1516406986.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:46.831Z,1516406986.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:47.212Z,1516406987.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:47.225Z,1516406987.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:47.616Z,1516406987.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:47.631Z,1516406987.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:48.018Z,1516406988.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:48.032Z,1516406988.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:48.415Z,1516406988.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:48.428Z,1516406988.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:48.805Z,1516406988.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:48.819Z,1516406988.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:49.206Z,1516406989.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:49.221Z,1516406989.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:49.602Z,1516406989.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:49.630Z,1516406989.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:50.012Z,1516406990.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:50.027Z,1516406990.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:50.410Z,1516406990.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:50.431Z,1516406990.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:50.817Z,1516406990.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:50.831Z,1516406990.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:51.218Z,1516406991.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:51.232Z,1516406991.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:51.616Z,1516406991.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:51.630Z,1516406991.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:52.012Z,1516406992.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:52.026Z,1516406992.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:52.405Z,1516406992.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:52.419Z,1516406992.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:52.806Z,1516406992.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:52.829Z,1516406992.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:53.212Z,1516406993.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:53.226Z,1516406993.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:53.618Z,1516406993.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:53.639Z,1516406993.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:54.020Z,1516406994.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:54.039Z,1516406994.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:54.422Z,1516406994.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:54.443Z,1516406994.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:54.793Z,1516406994.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:54.823Z,1516406994.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:55.211Z,1516406995.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:55.231Z,1516406995.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:55.595Z,1516406995.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:55.627Z,1516406995.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:56.012Z,1516406996.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:56.026Z,1516406996.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:56.399Z,1516406996.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:56.435Z,1516406996.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:56.822Z,1516406996.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:56.836Z,1516406996.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:57.226Z,1516406997.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:57.248Z,1516406997.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:57.622Z,1516406997.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:57.636Z,1516406997.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:57.995Z,1516406997.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:58.027Z,1516406998.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:58.393Z,1516406998.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:58.415Z,1516406998.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:58.800Z,1516406998.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:58.830Z,1516406998.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:09:59.196Z,1516406999.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:09:59.231Z,1516406999.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:02.323Z,1516407002.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:02.344Z,1516407002.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:02.450Z,1516407002.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:02.481Z,1516407002.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:02.834Z,1516407002.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:02.848Z,1516407002.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:03.262Z,1516407003.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:03.276Z,1516407003.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:03.629Z,1516407003.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:03.652Z,1516407003.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:04.037Z,1516407004.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:04.051Z,1516407004.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:04.429Z,1516407004.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:04.451Z,1516407004.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:04.845Z,1516407004.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:04.860Z,1516407004.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:05.243Z,1516407005.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:05.256Z,1516407005.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:05.638Z,1516407005.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:05.661Z,1516407005.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:06.023Z,1516407006.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:06.048Z,1516407006.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:06.419Z,1516407006.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:06.451Z,1516407006.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:06.828Z,1516407006.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:06.854Z,1516407006.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:07.223Z,1516407007.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:07.248Z,1516407007.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:07.640Z,1516407007.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:07.661Z,1516407007.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:08.046Z,1516407008.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:08.060Z,1516407008.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:08.442Z,1516407008.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:08.456Z,1516407008.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:08.820Z,1516407008.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:08.855Z,1516407008.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:09.224Z,1516407009.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:09.250Z,1516407009.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:09.624Z,1516407009.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:09.650Z,1516407009.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:10.021Z,1516407010.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:10.055Z,1516407010.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:10.417Z,1516407010.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:10.440Z,1516407010.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:10.846Z,1516407010.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:10.860Z,1516407010.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:11.243Z,1516407011.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:11.257Z,1516407011.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:11.642Z,1516407011.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:11.660Z,1516407011.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:12.022Z,1516407012.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:12.059Z,1516407012.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:12.427Z,1516407012.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:12.461Z,1516407012.461 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:12.461Z,1516407012.461 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-01-20T00:10:12.461Z,1516407012.461 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:10:12.463Z,1516407012.463 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:12.463Z,1516407012.463 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-01-20T00:10:12.463Z,1516407012.463 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:10:12.465Z,1516407012.465 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:12.465Z,1516407012.465 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 60
2018-01-20T00:10:12.465Z,1516407012.465 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:10:12.476Z,1516407012.476 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:10:12.476Z,1516407012.476 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:10:12.477Z,1516407012.477 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:10:12.831Z,1516407012.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:12.880Z,1516407012.880 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:10:12.880Z,1516407012.880 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-01-20T00:10:12.880Z,1516407012.880 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:10:12.880Z,1516407012.880 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-01-20T00:10:12.882Z,1516407012.882 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:10:12.882Z,1516407012.882 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 60
2018-01-20T00:10:13.228Z,1516407013.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:13.242Z,1516407013.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:10:13.242Z,1516407013.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:10:13.242Z,1516407013.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:10:13.243Z,1516407013.243 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:10:13.243Z,1516407013.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:10:13.243Z,1516407013.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:10:13.244Z,1516407013.244 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:10:13.244Z,1516407013.244 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:10:13.244Z,1516407013.244 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:10:13.650Z,1516407013.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:13.675Z,1516407013.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:10:13.676Z,1516407013.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:14.046Z,1516407014.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:14.070Z,1516407014.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:10:14.071Z,1516407014.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:14.443Z,1516407014.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:14.473Z,1516407014.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:10:14.474Z,1516407014.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:14.824Z,1516407014.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:14.850Z,1516407014.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:10:14.851Z,1516407014.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:15.227Z,1516407015.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:15.246Z,1516407015.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:10:15.247Z,1516407015.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:15.635Z,1516407015.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:15.650Z,1516407015.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:10:15.651Z,1516407015.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:16.029Z,1516407016.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:16.043Z,1516407016.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:10:16.044Z,1516407016.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:16.428Z,1516407016.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:16.446Z,1516407016.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:10:16.447Z,1516407016.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:16.839Z,1516407016.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:16.854Z,1516407016.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:10:16.854Z,1516407016.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:17.238Z,1516407017.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:17.251Z,1516407017.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:10:17.252Z,1516407017.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:17.637Z,1516407017.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:17.650Z,1516407017.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:10:17.651Z,1516407017.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:18.030Z,1516407018.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:18.048Z,1516407018.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:10:18.049Z,1516407018.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:18.436Z,1516407018.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:18.449Z,1516407018.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:10:18.450Z,1516407018.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:18.836Z,1516407018.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:18.850Z,1516407018.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:10:18.851Z,1516407018.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:19.231Z,1516407019.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:19.245Z,1516407019.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:10:19.246Z,1516407019.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:19.638Z,1516407019.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:19.651Z,1516407019.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:10:19.652Z,1516407019.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:20.038Z,1516407020.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:20.052Z,1516407020.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:10:20.053Z,1516407020.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:20.437Z,1516407020.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:20.458Z,1516407020.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:10:20.459Z,1516407020.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:20.836Z,1516407020.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:20.850Z,1516407020.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:10:20.851Z,1516407020.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:21.225Z,1516407021.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:21.247Z,1516407021.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:10:21.248Z,1516407021.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:21.635Z,1516407021.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:21.651Z,1516407021.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:10:21.652Z,1516407021.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:22.036Z,1516407022.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:22.050Z,1516407022.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:10:22.050Z,1516407022.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:22.429Z,1516407022.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:22.443Z,1516407022.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:10:22.444Z,1516407022.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:22.837Z,1516407022.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:22.851Z,1516407022.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:10:22.852Z,1516407022.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:23.237Z,1516407023.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:23.251Z,1516407023.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:10:23.252Z,1516407023.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:23.634Z,1516407023.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:23.662Z,1516407023.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:10:23.663Z,1516407023.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:24.035Z,1516407024.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:24.049Z,1516407024.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:10:24.050Z,1516407024.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:24.419Z,1516407024.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:24.446Z,1516407024.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:10:24.447Z,1516407024.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:24.836Z,1516407024.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:24.850Z,1516407024.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:10:24.851Z,1516407024.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:25.226Z,1516407025.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:25.248Z,1516407025.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T00:10:25.249Z,1516407025.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:25.638Z,1516407025.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:25.652Z,1516407025.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:10:25.653Z,1516407025.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:26.042Z,1516407026.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:26.055Z,1516407026.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:10:26.056Z,1516407026.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:26.441Z,1516407026.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:26.455Z,1516407026.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:10:26.456Z,1516407026.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:26.819Z,1516407026.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:26.846Z,1516407026.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:10:26.847Z,1516407026.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:27.235Z,1516407027.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:27.251Z,1516407027.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:10:27.252Z,1516407027.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:27.626Z,1516407027.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:27.648Z,1516407027.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:10:27.649Z,1516407027.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:28.033Z,1516407028.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:28.053Z,1516407028.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:10:28.054Z,1516407028.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:28.429Z,1516407028.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:28.451Z,1516407028.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:10:28.452Z,1516407028.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:28.844Z,1516407028.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:28.862Z,1516407028.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:10:28.863Z,1516407028.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:29.249Z,1516407029.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:29.262Z,1516407029.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:10:29.263Z,1516407029.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:29.638Z,1516407029.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:29.658Z,1516407029.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:10:29.659Z,1516407029.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:30.034Z,1516407030.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:30.053Z,1516407030.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:10:30.054Z,1516407030.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:30.423Z,1516407030.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:30.449Z,1516407030.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:10:30.450Z,1516407030.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:30.836Z,1516407030.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:30.850Z,1516407030.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:10:30.851Z,1516407030.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:31.236Z,1516407031.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:31.250Z,1516407031.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:10:31.251Z,1516407031.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:31.643Z,1516407031.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:31.656Z,1516407031.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:10:31.657Z,1516407031.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:32.062Z,1516407032.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:32.094Z,1516407032.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:10:32.095Z,1516407032.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:32.442Z,1516407032.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:32.456Z,1516407032.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T00:10:32.457Z,1516407032.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:32.840Z,1516407032.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:32.858Z,1516407032.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:33.236Z,1516407033.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:33.255Z,1516407033.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:33.623Z,1516407033.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:33.654Z,1516407033.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:34.033Z,1516407034.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:34.056Z,1516407034.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:34.422Z,1516407034.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:34.455Z,1516407034.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:34.838Z,1516407034.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:34.865Z,1516407034.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:35.250Z,1516407035.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:35.270Z,1516407035.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:35.634Z,1516407035.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:35.655Z,1516407035.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:36.040Z,1516407036.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:36.059Z,1516407036.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:36.440Z,1516407036.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:36.459Z,1516407036.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:36.828Z,1516407036.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:36.854Z,1516407036.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:37.223Z,1516407037.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:37.266Z,1516407037.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:37.647Z,1516407037.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:37.661Z,1516407037.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:38.049Z,1516407038.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:38.063Z,1516407038.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:38.442Z,1516407038.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:38.456Z,1516407038.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:38.824Z,1516407038.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:38.851Z,1516407038.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:39.222Z,1516407039.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:39.255Z,1516407039.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:39.627Z,1516407039.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:39.652Z,1516407039.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:40.028Z,1516407040.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:40.054Z,1516407040.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:40.419Z,1516407040.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:40.449Z,1516407040.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:40.846Z,1516407040.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:40.860Z,1516407040.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:41.255Z,1516407041.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:41.269Z,1516407041.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:41.646Z,1516407041.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:41.660Z,1516407041.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:42.023Z,1516407042.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:42.054Z,1516407042.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:42.427Z,1516407042.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:42.453Z,1516407042.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:42.828Z,1516407042.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:42.858Z,1516407042.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:43.231Z,1516407043.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:43.256Z,1516407043.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:43.634Z,1516407043.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:43.673Z,1516407043.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:44.050Z,1516407044.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:44.064Z,1516407044.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:44.442Z,1516407044.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:44.463Z,1516407044.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:44.832Z,1516407044.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:44.863Z,1516407044.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:45.223Z,1516407045.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:45.258Z,1516407045.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:45.625Z,1516407045.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:45.656Z,1516407045.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:46.029Z,1516407046.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:46.060Z,1516407046.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:46.431Z,1516407046.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:46.466Z,1516407046.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:46.839Z,1516407046.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:46.864Z,1516407046.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:47.258Z,1516407047.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:47.272Z,1516407047.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:47.638Z,1516407047.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:47.663Z,1516407047.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:48.031Z,1516407048.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:48.053Z,1516407048.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:48.429Z,1516407048.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:48.443Z,1516407048.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:48.832Z,1516407048.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:48.846Z,1516407048.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:49.229Z,1516407049.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:49.251Z,1516407049.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:49.641Z,1516407049.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:49.655Z,1516407049.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:50.043Z,1516407050.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:50.057Z,1516407050.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:50.442Z,1516407050.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:50.456Z,1516407050.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:50.841Z,1516407050.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:50.855Z,1516407050.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:51.236Z,1516407051.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:51.251Z,1516407051.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:51.635Z,1516407051.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:51.659Z,1516407051.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:52.038Z,1516407052.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:52.054Z,1516407052.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:52.438Z,1516407052.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:52.454Z,1516407052.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:52.842Z,1516407052.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:52.858Z,1516407052.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:53.242Z,1516407053.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:53.256Z,1516407053.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:53.639Z,1516407053.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:53.654Z,1516407053.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:54.031Z,1516407054.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:54.058Z,1516407054.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:54.438Z,1516407054.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:54.452Z,1516407054.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:54.837Z,1516407054.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:54.855Z,1516407054.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:55.238Z,1516407055.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:55.259Z,1516407055.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:55.645Z,1516407055.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:55.659Z,1516407055.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:56.041Z,1516407056.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:56.055Z,1516407056.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:56.442Z,1516407056.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:56.456Z,1516407056.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:56.839Z,1516407056.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:56.853Z,1516407056.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:57.240Z,1516407057.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:57.254Z,1516407057.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:57.639Z,1516407057.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:57.659Z,1516407057.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:58.038Z,1516407058.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:58.052Z,1516407058.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:58.438Z,1516407058.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:58.453Z,1516407058.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:58.843Z,1516407058.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:58.863Z,1516407058.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:10:59.244Z,1516407059.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:10:59.257Z,1516407059.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:02.350Z,1516407062.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:02.364Z,1516407062.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:02.480Z,1516407062.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:02.495Z,1516407062.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:02.849Z,1516407062.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:02.864Z,1516407062.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:03.249Z,1516407063.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:03.263Z,1516407063.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:03.652Z,1516407063.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:03.666Z,1516407063.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:04.054Z,1516407064.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:04.067Z,1516407064.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:04.450Z,1516407064.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:04.464Z,1516407064.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:04.848Z,1516407064.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:04.863Z,1516407064.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:05.250Z,1516407065.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:05.264Z,1516407065.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:05.650Z,1516407065.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:05.671Z,1516407065.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:06.047Z,1516407066.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:06.061Z,1516407066.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:06.445Z,1516407066.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:06.466Z,1516407066.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:06.853Z,1516407066.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:06.867Z,1516407066.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:07.252Z,1516407067.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:07.266Z,1516407067.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:07.654Z,1516407067.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:07.672Z,1516407067.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:08.041Z,1516407068.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:08.075Z,1516407068.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:08.448Z,1516407068.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:08.455Z,1516407068.455 [PNI_TCM](ERROR): CRC does not match. Expected:0x7 got:0x7105
2018-01-20T00:11:08.493Z,1516407068.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:08.845Z,1516407068.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:08.869Z,1516407068.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:09.248Z,1516407069.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:09.263Z,1516407069.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:09.650Z,1516407069.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:09.666Z,1516407069.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:10.051Z,1516407070.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:10.065Z,1516407070.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:10.453Z,1516407070.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:10.467Z,1516407070.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:10.849Z,1516407070.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:10.863Z,1516407070.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:11.244Z,1516407071.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:11.290Z,1516407071.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:11.648Z,1516407071.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:11.656Z,1516407071.656 [PNI_TCM](ERROR): CRC does not match. Expected:0x53138 got:0x17164
2018-01-20T00:11:11.692Z,1516407071.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:12.043Z,1516407072.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:12.056Z,1516407072.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:12.443Z,1516407072.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:12.456Z,1516407072.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:12.850Z,1516407072.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:12.894Z,1516407072.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:13.250Z,1516407073.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:13.258Z,1516407073.258 [PNI_TCM](ERROR): CRC does not match. Expected:0x41312 got:0x34077
2018-01-20T00:11:13.293Z,1516407073.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:13.651Z,1516407073.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:13.670Z,1516407073.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:14.048Z,1516407074.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:14.062Z,1516407074.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:14.439Z,1516407074.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:14.471Z,1516407074.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:14.850Z,1516407074.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:14.865Z,1516407074.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:15.250Z,1516407075.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:15.264Z,1516407075.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:15.655Z,1516407075.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:15.670Z,1516407075.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:16.053Z,1516407076.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:16.092Z,1516407076.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:16.455Z,1516407076.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:16.462Z,1516407076.462 [PNI_TCM](ERROR): CRC does not match. Expected:0x9830 got:0x8473
2018-01-20T00:11:16.502Z,1516407076.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:16.850Z,1516407076.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:16.864Z,1516407076.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:17.242Z,1516407077.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:17.267Z,1516407077.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:17.648Z,1516407077.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:17.679Z,1516407077.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:18.047Z,1516407078.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:18.065Z,1516407078.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:18.446Z,1516407078.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:18.466Z,1516407078.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:18.856Z,1516407078.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:18.875Z,1516407078.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:19.252Z,1516407079.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:19.292Z,1516407079.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:19.654Z,1516407079.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:19.671Z,1516407079.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:20.047Z,1516407080.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:20.063Z,1516407080.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:20.442Z,1516407080.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:20.457Z,1516407080.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:20.845Z,1516407080.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:20.875Z,1516407080.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:21.248Z,1516407081.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:21.266Z,1516407081.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:21.651Z,1516407081.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:21.667Z,1516407081.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:22.055Z,1516407082.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:22.069Z,1516407082.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:22.453Z,1516407082.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:22.493Z,1516407082.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:22.838Z,1516407082.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:22.852Z,1516407082.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:23.244Z,1516407083.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:23.266Z,1516407083.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:23.650Z,1516407083.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:23.664Z,1516407083.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:24.047Z,1516407084.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:24.095Z,1516407084.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:24.444Z,1516407084.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:24.465Z,1516407084.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:24.854Z,1516407084.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:24.871Z,1516407084.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:25.260Z,1516407085.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:25.275Z,1516407085.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:25.658Z,1516407085.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:25.695Z,1516407085.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:26.048Z,1516407086.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:26.062Z,1516407086.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:26.431Z,1516407086.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:26.464Z,1516407086.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:26.840Z,1516407086.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:26.870Z,1516407086.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:27.239Z,1516407087.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:27.286Z,1516407087.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:27.654Z,1516407087.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:27.671Z,1516407087.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:28.061Z,1516407088.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:28.082Z,1516407088.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:28.447Z,1516407088.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:28.481Z,1516407088.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:28.840Z,1516407088.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:28.887Z,1516407088.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:29.237Z,1516407089.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:29.263Z,1516407089.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:29.646Z,1516407089.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:29.683Z,1516407089.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:30.063Z,1516407090.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:30.077Z,1516407090.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:30.457Z,1516407090.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:30.492Z,1516407090.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:30.841Z,1516407090.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:30.870Z,1516407090.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:31.231Z,1516407091.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:31.263Z,1516407091.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:31.663Z,1516407091.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:31.687Z,1516407091.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:32.063Z,1516407092.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:32.111Z,1516407092.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:32.460Z,1516407092.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:32.477Z,1516407092.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:32.836Z,1516407092.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:32.875Z,1516407092.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:33.243Z,1516407093.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:33.278Z,1516407093.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:33.658Z,1516407093.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:33.676Z,1516407093.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:34.068Z,1516407094.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:34.091Z,1516407094.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:34.443Z,1516407094.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:34.475Z,1516407094.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:34.840Z,1516407094.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:34.854Z,1516407094.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:35.241Z,1516407095.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:35.254Z,1516407095.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:35.650Z,1516407095.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:35.664Z,1516407095.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:36.046Z,1516407096.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:36.060Z,1516407096.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:36.445Z,1516407096.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:36.460Z,1516407096.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:36.846Z,1516407096.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:36.861Z,1516407096.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:37.245Z,1516407097.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:37.259Z,1516407097.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:37.647Z,1516407097.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:37.660Z,1516407097.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:38.047Z,1516407098.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:38.061Z,1516407098.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:38.458Z,1516407098.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:38.472Z,1516407098.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:38.847Z,1516407098.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:38.862Z,1516407098.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:39.247Z,1516407099.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:39.263Z,1516407099.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:39.650Z,1516407099.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:39.666Z,1516407099.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:40.050Z,1516407100.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:40.063Z,1516407100.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:40.449Z,1516407100.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:40.471Z,1516407100.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:40.848Z,1516407100.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:40.862Z,1516407100.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:41.238Z,1516407101.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:41.259Z,1516407101.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:41.650Z,1516407101.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:41.664Z,1516407101.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:42.052Z,1516407102.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:42.067Z,1516407102.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:42.458Z,1516407102.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:42.472Z,1516407102.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:42.848Z,1516407102.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:42.863Z,1516407102.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:43.231Z,1516407103.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:43.263Z,1516407103.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:43.659Z,1516407103.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:43.672Z,1516407103.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:44.061Z,1516407104.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:44.079Z,1516407104.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:44.458Z,1516407104.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:44.473Z,1516407104.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:44.836Z,1516407104.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:44.862Z,1516407104.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:45.230Z,1516407105.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:45.266Z,1516407105.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:45.650Z,1516407105.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:45.667Z,1516407105.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:46.058Z,1516407106.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:46.072Z,1516407106.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:46.446Z,1516407106.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:46.481Z,1516407106.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:46.840Z,1516407106.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:46.865Z,1516407106.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:47.235Z,1516407107.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:47.266Z,1516407107.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:47.652Z,1516407107.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:47.672Z,1516407107.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:48.054Z,1516407108.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:48.068Z,1516407108.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:48.449Z,1516407108.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:48.470Z,1516407108.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:48.840Z,1516407108.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:48.866Z,1516407108.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:49.235Z,1516407109.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:49.260Z,1516407109.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:49.651Z,1516407109.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:49.676Z,1516407109.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:50.062Z,1516407110.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:50.076Z,1516407110.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:50.450Z,1516407110.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:50.465Z,1516407110.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:50.836Z,1516407110.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:50.861Z,1516407110.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:51.239Z,1516407111.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:51.265Z,1516407111.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:51.652Z,1516407111.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:51.671Z,1516407111.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:52.058Z,1516407112.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:52.078Z,1516407112.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:52.450Z,1516407112.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:52.472Z,1516407112.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:52.836Z,1516407112.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:52.861Z,1516407112.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:53.231Z,1516407113.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:53.267Z,1516407113.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:53.654Z,1516407113.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:53.669Z,1516407113.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:54.057Z,1516407114.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:54.071Z,1516407114.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:54.455Z,1516407114.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:54.474Z,1516407114.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:54.834Z,1516407114.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:54.860Z,1516407114.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:55.235Z,1516407115.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:55.266Z,1516407115.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:55.655Z,1516407115.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:55.674Z,1516407115.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:56.062Z,1516407116.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:56.076Z,1516407116.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:56.454Z,1516407116.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:56.475Z,1516407116.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:56.836Z,1516407116.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:56.871Z,1516407116.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:57.239Z,1516407117.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:57.278Z,1516407117.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:57.658Z,1516407117.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:57.672Z,1516407117.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:58.057Z,1516407118.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:58.078Z,1516407118.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:58.454Z,1516407118.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:58.475Z,1516407118.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:58.835Z,1516407118.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:58.866Z,1516407118.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:11:59.255Z,1516407119.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:11:59.269Z,1516407119.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:02.336Z,1516407122.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:02.366Z,1516407122.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:02.470Z,1516407122.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:02.510Z,1516407122.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:02.842Z,1516407122.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:02.871Z,1516407122.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:03.233Z,1516407123.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:03.266Z,1516407123.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:03.623Z,1516407123.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:03.643Z,1516407123.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:04.026Z,1516407124.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:04.047Z,1516407124.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:04.425Z,1516407124.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:04.439Z,1516407124.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:04.830Z,1516407124.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:04.844Z,1516407124.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:05.238Z,1516407125.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:05.268Z,1516407125.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:05.630Z,1516407125.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:05.650Z,1516407125.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:06.026Z,1516407126.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:06.040Z,1516407126.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:06.426Z,1516407126.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:06.440Z,1516407126.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:06.825Z,1516407126.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:06.840Z,1516407126.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:07.219Z,1516407127.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:07.246Z,1516407127.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:07.619Z,1516407127.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:07.647Z,1516407127.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:08.039Z,1516407128.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:08.053Z,1516407128.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:08.435Z,1516407128.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:08.450Z,1516407128.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:08.839Z,1516407128.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:08.859Z,1516407128.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:09.229Z,1516407129.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:09.243Z,1516407129.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:09.621Z,1516407129.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:09.640Z,1516407129.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:10.022Z,1516407130.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:10.043Z,1516407130.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:10.411Z,1516407130.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:10.445Z,1516407130.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:10.826Z,1516407130.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:10.854Z,1516407130.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:11.241Z,1516407131.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:11.255Z,1516407131.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:11.632Z,1516407131.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:11.650Z,1516407131.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:12.019Z,1516407132.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:12.044Z,1516407132.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:12.423Z,1516407132.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:12.448Z,1516407132.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:12.811Z,1516407132.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:12.845Z,1516407132.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:13.219Z,1516407133.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:13.251Z,1516407133.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:13.616Z,1516407133.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:13.650Z,1516407133.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:14.026Z,1516407134.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:14.059Z,1516407134.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:14.427Z,1516407134.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:14.459Z,1516407134.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:14.827Z,1516407134.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:14.863Z,1516407134.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:15.219Z,1516407135.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:15.251Z,1516407135.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:15.609Z,1516407135.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:15.651Z,1516407135.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:16.020Z,1516407136.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:16.051Z,1516407136.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:16.419Z,1516407136.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:16.434Z,1516407136.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:16.822Z,1516407136.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:16.836Z,1516407136.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:17.238Z,1516407137.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:17.263Z,1516407137.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:17.633Z,1516407137.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:17.660Z,1516407137.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:18.019Z,1516407138.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:18.039Z,1516407138.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:18.416Z,1516407138.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:18.431Z,1516407138.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:18.823Z,1516407138.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:18.837Z,1516407138.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:19.222Z,1516407139.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:19.236Z,1516407139.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:19.620Z,1516407139.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:19.635Z,1516407139.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:20.022Z,1516407140.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:20.036Z,1516407140.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:20.422Z,1516407140.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:20.436Z,1516407140.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:20.838Z,1516407140.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:20.859Z,1516407140.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:21.223Z,1516407141.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:21.236Z,1516407141.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:21.614Z,1516407141.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:21.633Z,1516407141.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:22.023Z,1516407142.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:22.037Z,1516407142.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:22.419Z,1516407142.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:22.438Z,1516407142.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:22.822Z,1516407142.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:22.836Z,1516407142.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:23.238Z,1516407143.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:23.260Z,1516407143.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:23.630Z,1516407143.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:23.644Z,1516407143.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:24.024Z,1516407144.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:24.039Z,1516407144.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:24.420Z,1516407144.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:24.439Z,1516407144.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:24.820Z,1516407144.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:24.834Z,1516407144.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:25.225Z,1516407145.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:25.239Z,1516407145.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:25.621Z,1516407145.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:25.635Z,1516407145.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:26.038Z,1516407146.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:26.061Z,1516407146.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:26.422Z,1516407146.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:26.436Z,1516407146.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:26.838Z,1516407146.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:26.861Z,1516407146.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:27.217Z,1516407147.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:27.243Z,1516407147.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:27.621Z,1516407147.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:27.635Z,1516407147.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:28.019Z,1516407148.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:28.042Z,1516407148.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:28.426Z,1516407148.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:28.440Z,1516407148.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:28.833Z,1516407148.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:28.855Z,1516407148.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:29.234Z,1516407149.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:29.248Z,1516407149.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:29.633Z,1516407149.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:29.647Z,1516407149.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:30.018Z,1516407150.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:30.049Z,1516407150.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:30.427Z,1516407150.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:30.441Z,1516407150.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:30.828Z,1516407150.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:30.841Z,1516407150.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:31.228Z,1516407151.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:31.242Z,1516407151.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:31.627Z,1516407151.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:31.641Z,1516407151.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:32.031Z,1516407152.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:32.045Z,1516407152.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:32.433Z,1516407152.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:32.447Z,1516407152.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:32.833Z,1516407152.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:32.847Z,1516407152.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:33.227Z,1516407153.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:33.241Z,1516407153.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:33.621Z,1516407153.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:33.638Z,1516407153.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:34.019Z,1516407154.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:34.041Z,1516407154.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:34.427Z,1516407154.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:34.441Z,1516407154.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:34.834Z,1516407154.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:34.848Z,1516407154.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:35.236Z,1516407155.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:35.255Z,1516407155.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:35.638Z,1516407155.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:35.659Z,1516407155.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:36.027Z,1516407156.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:36.047Z,1516407156.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:36.427Z,1516407156.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:36.441Z,1516407156.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:36.811Z,1516407156.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:36.838Z,1516407156.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:37.228Z,1516407157.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:37.242Z,1516407157.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:37.627Z,1516407157.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:37.641Z,1516407157.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:38.031Z,1516407158.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:38.044Z,1516407158.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:38.434Z,1516407158.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:38.448Z,1516407158.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:38.833Z,1516407158.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:38.847Z,1516407158.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:39.227Z,1516407159.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:39.241Z,1516407159.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:39.621Z,1516407159.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:39.643Z,1516407159.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:40.028Z,1516407160.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:40.042Z,1516407160.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:40.411Z,1516407160.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:40.446Z,1516407160.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:40.834Z,1516407160.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:40.848Z,1516407160.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:41.237Z,1516407161.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:41.251Z,1516407161.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:41.630Z,1516407161.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:41.650Z,1516407161.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:42.011Z,1516407162.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:42.036Z,1516407162.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:42.415Z,1516407162.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:42.446Z,1516407162.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:42.815Z,1516407162.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:42.841Z,1516407162.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:43.228Z,1516407163.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:43.243Z,1516407163.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:43.615Z,1516407163.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:43.646Z,1516407163.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:44.035Z,1516407164.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:44.049Z,1516407164.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:44.430Z,1516407164.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:44.453Z,1516407164.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:44.839Z,1516407164.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:44.853Z,1516407164.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:45.212Z,1516407165.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:45.244Z,1516407165.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:45.614Z,1516407165.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:45.650Z,1516407165.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:46.031Z,1516407166.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:46.045Z,1516407166.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:46.420Z,1516407166.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:46.447Z,1516407166.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:46.830Z,1516407166.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:46.853Z,1516407166.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:47.238Z,1516407167.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:47.254Z,1516407167.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:47.635Z,1516407167.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:47.648Z,1516407167.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:48.017Z,1516407168.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:48.035Z,1516407168.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:48.424Z,1516407168.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:48.439Z,1516407168.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:48.824Z,1516407168.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:48.839Z,1516407168.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:49.218Z,1516407169.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:49.232Z,1516407169.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:49.623Z,1516407169.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:49.643Z,1516407169.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:50.031Z,1516407170.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:50.069Z,1516407170.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:50.422Z,1516407170.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:50.437Z,1516407170.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:50.835Z,1516407170.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:50.866Z,1516407170.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:51.227Z,1516407171.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:51.242Z,1516407171.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:51.616Z,1516407171.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:51.630Z,1516407171.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:52.024Z,1516407172.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:52.038Z,1516407172.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:52.421Z,1516407172.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:52.435Z,1516407172.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:52.826Z,1516407172.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:52.840Z,1516407172.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:53.238Z,1516407173.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:53.261Z,1516407173.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:53.622Z,1516407173.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:53.636Z,1516407173.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:54.021Z,1516407174.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:54.043Z,1516407174.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:54.421Z,1516407174.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:54.435Z,1516407174.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:54.825Z,1516407174.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:54.838Z,1516407174.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:55.221Z,1516407175.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:55.236Z,1516407175.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:55.624Z,1516407175.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:55.639Z,1516407175.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:56.022Z,1516407176.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:56.036Z,1516407176.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:56.426Z,1516407176.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:56.441Z,1516407176.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:56.838Z,1516407176.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:56.867Z,1516407176.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:57.219Z,1516407177.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:57.238Z,1516407177.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:57.613Z,1516407177.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:57.635Z,1516407177.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:58.025Z,1516407178.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:58.039Z,1516407178.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:58.043Z,1516407178.043 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T00:07:57.7Z
2018-01-20T00:12:58.043Z,1516407178.043 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T00:12:58.043Z,1516407178.043 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T00:12:58.420Z,1516407178.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:58.434Z,1516407178.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:58.876Z,1516407178.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:58.895Z,1516407178.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:12:59.233Z,1516407179.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:12:59.247Z,1516407179.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:02.346Z,1516407182.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:02.360Z,1516407182.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:02.445Z,1516407182.445 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0072.lzma
2018-01-20T00:13:02.476Z,1516407182.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:02.507Z,1516407182.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:02.836Z,1516407182.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:02.855Z,1516407182.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:03.207Z,1516407183.207 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0072.lzma.bak
2018-01-20T00:13:03.207Z,1516407183.207 [DataOverHttps](INFO): SBD MOMSN=7725178
2018-01-20T00:13:03.246Z,1516407183.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:03.260Z,1516407183.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:03.724Z,1516407183.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:03.739Z,1516407183.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:04.043Z,1516407184.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:04.057Z,1516407184.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:07.138Z,1516407187.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:07.152Z,1516407187.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:07.259Z,1516407187.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:07.299Z,1516407187.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:07.636Z,1516407187.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:07.655Z,1516407187.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:08.037Z,1516407188.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:08.051Z,1516407188.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:08.434Z,1516407188.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:08.448Z,1516407188.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:08.838Z,1516407188.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:08.852Z,1516407188.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:11.938Z,1516407191.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:11.952Z,1516407191.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:12.029Z,1516407192.029 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180119T210901/Express0073.lzma
2018-01-20T00:13:12.062Z,1516407192.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:12.107Z,1516407192.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:12.440Z,1516407192.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:12.459Z,1516407192.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:12.811Z,1516407192.811 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0073.lzma.bak
2018-01-20T00:13:12.811Z,1516407192.811 [DataOverHttps](INFO): SBD MOMSN=7725180
2018-01-20T00:13:12.852Z,1516407192.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:12.884Z,1516407192.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:13.324Z,1516407193.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:13.342Z,1516407193.342 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:13.343Z,1516407193.343 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-01-20T00:13:13.343Z,1516407193.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:13:13.344Z,1516407193.344 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:13.344Z,1516407193.344 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-01-20T00:13:13.344Z,1516407193.344 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:13:13.346Z,1516407193.346 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:13.346Z,1516407193.346 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 61
2018-01-20T00:13:13.346Z,1516407193.346 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:13:13.348Z,1516407193.348 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T00:13:13.348Z,1516407193.348 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T00:13:13.348Z,1516407193.348 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T00:13:13.358Z,1516407193.358 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:13:13.359Z,1516407193.359 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:13:13.359Z,1516407193.359 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:13:13.649Z,1516407193.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:13.694Z,1516407193.694 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:13:13.694Z,1516407193.694 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-01-20T00:13:13.695Z,1516407193.695 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:13:13.695Z,1516407193.695 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-01-20T00:13:13.695Z,1516407193.695 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:13:13.695Z,1516407193.695 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 61
2018-01-20T00:13:16.762Z,1516407196.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:16.791Z,1516407196.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:13:16.792Z,1516407196.792 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:13:16.792Z,1516407196.792 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:13:16.792Z,1516407196.792 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:13:16.793Z,1516407196.793 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:13:16.793Z,1516407196.793 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:13:16.793Z,1516407196.793 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:13:16.794Z,1516407196.794 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:13:16.794Z,1516407196.794 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:13:16.918Z,1516407196.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:16.950Z,1516407196.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:13:16.951Z,1516407196.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:17.252Z,1516407197.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:17.270Z,1516407197.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2018-01-20T00:13:17.271Z,1516407197.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:17.653Z,1516407197.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:17.667Z,1516407197.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2018-01-20T00:13:17.668Z,1516407197.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:18.042Z,1516407198.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:18.061Z,1516407198.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2018-01-20T00:13:18.062Z,1516407198.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:18.444Z,1516407198.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:18.466Z,1516407198.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-01-20T00:13:18.467Z,1516407198.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:18.858Z,1516407198.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:18.872Z,1516407198.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-01-20T00:13:18.873Z,1516407198.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:19.257Z,1516407199.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:19.271Z,1516407199.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-01-20T00:13:19.272Z,1516407199.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:19.656Z,1516407199.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:19.678Z,1516407199.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-01-20T00:13:19.679Z,1516407199.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:20.048Z,1516407200.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:20.062Z,1516407200.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-01-20T00:13:20.063Z,1516407200.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:20.438Z,1516407200.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:20.467Z,1516407200.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-01-20T00:13:20.468Z,1516407200.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:20.847Z,1516407200.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:20.860Z,1516407200.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-01-20T00:13:20.862Z,1516407200.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:21.244Z,1516407201.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:21.270Z,1516407201.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-01-20T00:13:21.271Z,1516407201.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:21.651Z,1516407201.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:21.665Z,1516407201.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-01-20T00:13:21.666Z,1516407201.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:22.058Z,1516407202.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:22.071Z,1516407202.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-01-20T00:13:22.072Z,1516407202.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:22.462Z,1516407202.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:22.482Z,1516407202.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-01-20T00:13:22.483Z,1516407202.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:22.861Z,1516407202.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:22.882Z,1516407202.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-01-20T00:13:22.883Z,1516407202.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:23.251Z,1516407203.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:23.264Z,1516407203.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-01-20T00:13:23.266Z,1516407203.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:23.642Z,1516407203.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:23.668Z,1516407203.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-01-20T00:13:23.674Z,1516407203.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:24.042Z,1516407204.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:24.067Z,1516407204.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-01-20T00:13:24.068Z,1516407204.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:24.439Z,1516407204.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:24.464Z,1516407204.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-01-20T00:13:24.465Z,1516407204.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:24.859Z,1516407204.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:24.873Z,1516407204.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-01-20T00:13:24.874Z,1516407204.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:25.257Z,1516407205.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:25.277Z,1516407205.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-01-20T00:13:25.278Z,1516407205.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:25.658Z,1516407205.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:25.672Z,1516407205.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-01-20T00:13:25.673Z,1516407205.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:26.039Z,1516407206.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:26.074Z,1516407206.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-01-20T00:13:26.075Z,1516407206.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:26.440Z,1516407206.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:26.474Z,1516407206.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-01-20T00:13:26.475Z,1516407206.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:26.844Z,1516407206.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:26.878Z,1516407206.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-01-20T00:13:26.879Z,1516407206.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:27.238Z,1516407207.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:27.265Z,1516407207.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-01-20T00:13:27.266Z,1516407207.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:27.641Z,1516407207.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:27.655Z,1516407207.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-01-20T00:13:27.656Z,1516407207.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:28.053Z,1516407208.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:28.108Z,1516407208.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:13:28.137Z,1516407208.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:28.457Z,1516407208.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:28.491Z,1516407208.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-01-20T00:13:28.492Z,1516407208.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:28.854Z,1516407208.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:28.886Z,1516407208.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-01-20T00:13:28.887Z,1516407208.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:29.251Z,1516407209.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:29.294Z,1516407209.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:13:29.295Z,1516407209.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:29.655Z,1516407209.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:29.691Z,1516407209.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-01-20T00:13:29.691Z,1516407209.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:30.048Z,1516407210.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:30.098Z,1516407210.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:13:30.099Z,1516407210.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:30.450Z,1516407210.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:30.493Z,1516407210.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-01-20T00:13:30.494Z,1516407210.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:30.852Z,1516407210.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:30.905Z,1516407210.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:13:30.906Z,1516407210.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:31.256Z,1516407211.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:31.300Z,1516407211.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:13:31.301Z,1516407211.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:31.700Z,1516407211.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:31.747Z,1516407211.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:13:31.748Z,1516407211.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:32.050Z,1516407212.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:32.071Z,1516407212.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-01-20T00:13:32.072Z,1516407212.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:32.449Z,1516407212.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:32.472Z,1516407212.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-01-20T00:13:32.494Z,1516407212.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:32.850Z,1516407212.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:32.868Z,1516407212.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-01-20T00:13:32.874Z,1516407212.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:33.251Z,1516407213.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:33.300Z,1516407213.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T00:13:33.301Z,1516407213.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:33.650Z,1516407213.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:33.682Z,1516407213.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:34.060Z,1516407214.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:34.083Z,1516407214.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:34.465Z,1516407214.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:34.492Z,1516407214.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:34.861Z,1516407214.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:34.875Z,1516407214.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:35.239Z,1516407215.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:35.255Z,1516407215.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:35.643Z,1516407215.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:35.657Z,1516407215.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:36.041Z,1516407216.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:36.079Z,1516407216.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:36.446Z,1516407216.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:36.487Z,1516407216.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:36.858Z,1516407216.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:36.884Z,1516407216.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:37.258Z,1516407217.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:37.282Z,1516407217.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:37.658Z,1516407217.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:37.679Z,1516407217.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:38.048Z,1516407218.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:38.062Z,1516407218.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:38.440Z,1516407218.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:38.454Z,1516407218.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:38.858Z,1516407218.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:38.881Z,1516407218.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:39.262Z,1516407219.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:39.286Z,1516407219.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:39.658Z,1516407219.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:39.681Z,1516407219.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:40.045Z,1516407220.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:40.083Z,1516407220.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:40.447Z,1516407220.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:40.461Z,1516407220.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:40.858Z,1516407220.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:40.890Z,1516407220.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:41.258Z,1516407221.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:41.288Z,1516407221.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:41.658Z,1516407221.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:41.672Z,1516407221.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:42.049Z,1516407222.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:42.063Z,1516407222.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:42.448Z,1516407222.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:42.467Z,1516407222.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:42.858Z,1516407222.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:42.872Z,1516407222.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:43.250Z,1516407223.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:43.264Z,1516407223.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:43.662Z,1516407223.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:43.692Z,1516407223.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:44.049Z,1516407224.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:44.062Z,1516407224.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:44.444Z,1516407224.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:44.459Z,1516407224.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:44.862Z,1516407224.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:44.892Z,1516407224.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:45.250Z,1516407225.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:45.270Z,1516407225.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:45.650Z,1516407225.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:45.664Z,1516407225.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:46.045Z,1516407226.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:46.067Z,1516407226.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:46.448Z,1516407226.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:46.462Z,1516407226.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:46.862Z,1516407226.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:46.891Z,1516407226.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:47.258Z,1516407227.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:47.272Z,1516407227.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:47.655Z,1516407227.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:47.697Z,1516407227.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:48.049Z,1516407228.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:48.064Z,1516407228.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:48.448Z,1516407228.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:48.475Z,1516407228.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:48.861Z,1516407228.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:48.887Z,1516407228.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:49.264Z,1516407229.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:49.327Z,1516407229.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:49.680Z,1516407229.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:49.703Z,1516407229.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:50.040Z,1516407230.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:50.075Z,1516407230.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:50.447Z,1516407230.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:50.461Z,1516407230.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:50.893Z,1516407230.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:50.915Z,1516407230.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:51.264Z,1516407231.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:51.291Z,1516407231.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:51.671Z,1516407231.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:51.695Z,1516407231.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:52.042Z,1516407232.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:52.080Z,1516407232.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:52.440Z,1516407232.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:52.490Z,1516407232.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:52.859Z,1516407232.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:52.879Z,1516407232.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:53.268Z,1516407233.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:53.310Z,1516407233.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:53.661Z,1516407233.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:53.686Z,1516407233.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:54.065Z,1516407234.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:54.088Z,1516407234.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:54.450Z,1516407234.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:54.468Z,1516407234.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:54.861Z,1516407234.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:54.908Z,1516407234.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:55.264Z,1516407235.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:55.283Z,1516407235.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:55.660Z,1516407235.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:55.718Z,1516407235.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:56.042Z,1516407236.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:56.117Z,1516407236.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:56.455Z,1516407236.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:56.478Z,1516407236.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:56.858Z,1516407236.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:56.872Z,1516407236.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:57.258Z,1516407237.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:57.272Z,1516407237.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:57.662Z,1516407237.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:57.676Z,1516407237.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:58.040Z,1516407238.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:58.066Z,1516407238.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:58.443Z,1516407238.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:58.469Z,1516407238.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:58.862Z,1516407238.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:58.876Z,1516407238.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:59.259Z,1516407239.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:59.279Z,1516407239.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:13:59.662Z,1516407239.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:13:59.675Z,1516407239.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:00.044Z,1516407240.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:00.069Z,1516407240.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:00.459Z,1516407240.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:00.479Z,1516407240.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:00.863Z,1516407240.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:00.877Z,1516407240.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:01.266Z,1516407241.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:01.280Z,1516407241.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:01.658Z,1516407241.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:01.672Z,1516407241.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:02.040Z,1516407242.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:02.071Z,1516407242.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:02.443Z,1516407242.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:02.468Z,1516407242.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:02.858Z,1516407242.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:02.872Z,1516407242.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:03.259Z,1516407243.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:03.273Z,1516407243.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:03.663Z,1516407243.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:03.677Z,1516407243.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:04.044Z,1516407244.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:04.070Z,1516407244.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:04.441Z,1516407244.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:04.472Z,1516407244.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:04.846Z,1516407244.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:04.875Z,1516407244.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:05.267Z,1516407245.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:05.281Z,1516407245.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:05.647Z,1516407245.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:05.679Z,1516407245.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:06.039Z,1516407246.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:06.070Z,1516407246.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:06.445Z,1516407246.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:06.475Z,1516407246.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:06.848Z,1516407246.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:06.881Z,1516407246.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:07.271Z,1516407247.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:07.285Z,1516407247.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:07.672Z,1516407247.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:07.688Z,1516407247.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:08.044Z,1516407248.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:08.078Z,1516407248.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:08.435Z,1516407248.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:08.475Z,1516407248.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:08.854Z,1516407248.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:08.880Z,1516407248.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:09.254Z,1516407249.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:09.268Z,1516407249.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:09.646Z,1516407249.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:09.660Z,1516407249.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:10.042Z,1516407250.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:10.056Z,1516407250.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:10.444Z,1516407250.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:10.457Z,1516407250.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:10.847Z,1516407250.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:10.861Z,1516407250.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:11.255Z,1516407251.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:11.268Z,1516407251.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:11.677Z,1516407251.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:11.691Z,1516407251.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:12.040Z,1516407252.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:12.067Z,1516407252.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:12.442Z,1516407252.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:12.475Z,1516407252.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:12.851Z,1516407252.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:12.866Z,1516407252.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:13.250Z,1516407253.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:13.278Z,1516407253.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:13.661Z,1516407253.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:13.683Z,1516407253.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:14.055Z,1516407254.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:14.070Z,1516407254.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:17.133Z,1516407257.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:17.158Z,1516407257.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:17.274Z,1516407257.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:17.318Z,1516407257.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:17.618Z,1516407257.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:17.632Z,1516407257.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:18.030Z,1516407258.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:18.062Z,1516407258.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:18.430Z,1516407258.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:18.459Z,1516407258.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:18.812Z,1516407258.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:18.834Z,1516407258.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:19.221Z,1516407259.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:19.234Z,1516407259.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:19.619Z,1516407259.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:19.639Z,1516407259.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:20.024Z,1516407260.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:20.039Z,1516407260.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:20.425Z,1516407260.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:20.438Z,1516407260.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:20.825Z,1516407260.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:20.843Z,1516407260.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:21.219Z,1516407261.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:21.239Z,1516407261.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:21.620Z,1516407261.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:21.634Z,1516407261.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:22.019Z,1516407262.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:22.039Z,1516407262.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:22.416Z,1516407262.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:22.430Z,1516407262.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:22.812Z,1516407262.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:22.830Z,1516407262.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:23.224Z,1516407263.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:23.243Z,1516407263.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:23.626Z,1516407263.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:23.640Z,1516407263.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:24.025Z,1516407264.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:24.039Z,1516407264.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:24.417Z,1516407264.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:24.431Z,1516407264.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:24.814Z,1516407264.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:24.832Z,1516407264.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:25.212Z,1516407265.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:25.230Z,1516407265.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:25.618Z,1516407265.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:25.639Z,1516407265.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:26.025Z,1516407266.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:26.039Z,1516407266.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:26.426Z,1516407266.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:26.440Z,1516407266.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:26.825Z,1516407266.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:26.839Z,1516407266.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:27.218Z,1516407267.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:27.232Z,1516407267.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:27.612Z,1516407267.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:27.630Z,1516407267.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:28.019Z,1516407268.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:28.039Z,1516407268.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:28.420Z,1516407268.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:28.434Z,1516407268.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:28.812Z,1516407268.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:28.830Z,1516407268.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:29.225Z,1516407269.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:29.239Z,1516407269.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:29.623Z,1516407269.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:29.643Z,1516407269.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:30.025Z,1516407270.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:30.039Z,1516407270.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:30.419Z,1516407270.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:30.439Z,1516407270.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:30.815Z,1516407270.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:30.835Z,1516407270.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:31.212Z,1516407271.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:31.230Z,1516407271.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:31.619Z,1516407271.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:31.639Z,1516407271.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:32.024Z,1516407272.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:32.043Z,1516407272.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:32.425Z,1516407272.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:32.438Z,1516407272.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:32.825Z,1516407272.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:32.843Z,1516407272.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:33.219Z,1516407273.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:33.239Z,1516407273.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:33.620Z,1516407273.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:33.634Z,1516407273.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:34.017Z,1516407274.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:34.031Z,1516407274.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:34.414Z,1516407274.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:34.433Z,1516407274.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:34.816Z,1516407274.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:34.830Z,1516407274.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:35.225Z,1516407275.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:35.239Z,1516407275.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:35.624Z,1516407275.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:35.643Z,1516407275.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:36.025Z,1516407276.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:36.039Z,1516407276.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:36.419Z,1516407276.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:36.435Z,1516407276.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:36.815Z,1516407276.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:36.830Z,1516407276.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:37.217Z,1516407277.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:37.230Z,1516407277.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:37.614Z,1516407277.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:37.632Z,1516407277.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:38.026Z,1516407278.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:38.040Z,1516407278.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:38.426Z,1516407278.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:38.440Z,1516407278.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:38.826Z,1516407278.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:38.840Z,1516407278.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:39.220Z,1516407279.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:39.234Z,1516407279.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:39.617Z,1516407279.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:39.631Z,1516407279.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:40.020Z,1516407280.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:40.034Z,1516407280.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:40.414Z,1516407280.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:40.434Z,1516407280.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:40.824Z,1516407280.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:40.837Z,1516407280.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:41.226Z,1516407281.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:41.240Z,1516407281.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:41.626Z,1516407281.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:41.640Z,1516407281.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:42.026Z,1516407282.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:42.040Z,1516407282.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:42.410Z,1516407282.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:42.428Z,1516407282.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:42.822Z,1516407282.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:42.836Z,1516407282.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:43.219Z,1516407283.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:43.233Z,1516407283.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:43.610Z,1516407283.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:43.635Z,1516407283.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:44.027Z,1516407284.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:44.047Z,1516407284.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:44.431Z,1516407284.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:44.445Z,1516407284.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:44.827Z,1516407284.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:44.847Z,1516407284.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:45.220Z,1516407285.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:45.236Z,1516407285.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:45.617Z,1516407285.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:45.631Z,1516407285.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:46.020Z,1516407286.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:46.035Z,1516407286.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:46.424Z,1516407286.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:46.443Z,1516407286.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:46.821Z,1516407286.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:46.835Z,1516407286.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:47.229Z,1516407287.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:47.243Z,1516407287.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:47.629Z,1516407287.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:47.651Z,1516407287.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:48.031Z,1516407288.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:48.044Z,1516407288.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:48.405Z,1516407288.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:48.432Z,1516407288.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:48.811Z,1516407288.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:48.837Z,1516407288.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:49.207Z,1516407289.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:49.235Z,1516407289.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:49.606Z,1516407289.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:49.634Z,1516407289.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:50.030Z,1516407290.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:50.044Z,1516407290.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:50.427Z,1516407290.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:50.442Z,1516407290.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:50.822Z,1516407290.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:50.844Z,1516407290.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:51.215Z,1516407291.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:51.241Z,1516407291.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:51.607Z,1516407291.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:51.639Z,1516407291.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:52.011Z,1516407292.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:52.037Z,1516407292.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:52.411Z,1516407292.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:52.441Z,1516407292.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:52.811Z,1516407292.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:52.844Z,1516407292.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:53.230Z,1516407293.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:53.244Z,1516407293.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:53.630Z,1516407293.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:53.644Z,1516407293.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:54.019Z,1516407294.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:54.045Z,1516407294.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:54.408Z,1516407294.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:54.430Z,1516407294.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:54.811Z,1516407294.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:54.842Z,1516407294.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:55.212Z,1516407295.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:55.226Z,1516407295.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:55.607Z,1516407295.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:55.622Z,1516407295.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:56.026Z,1516407296.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:56.055Z,1516407296.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:56.426Z,1516407296.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:56.448Z,1516407296.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:56.818Z,1516407296.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:56.848Z,1516407296.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:57.218Z,1516407297.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:57.232Z,1516407297.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:57.616Z,1516407297.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:57.630Z,1516407297.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:58.014Z,1516407298.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:58.028Z,1516407298.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:58.416Z,1516407298.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:58.430Z,1516407298.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:58.812Z,1516407298.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:58.826Z,1516407298.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:59.219Z,1516407299.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:59.233Z,1516407299.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:14:59.630Z,1516407299.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:14:59.654Z,1516407299.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:00.026Z,1516407300.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:00.059Z,1516407300.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:00.407Z,1516407300.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:00.427Z,1516407300.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:00.817Z,1516407300.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:00.831Z,1516407300.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:01.218Z,1516407301.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:01.231Z,1516407301.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:01.612Z,1516407301.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:01.626Z,1516407301.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:02.024Z,1516407302.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:02.052Z,1516407302.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:02.419Z,1516407302.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:02.456Z,1516407302.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:02.815Z,1516407302.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:02.831Z,1516407302.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:03.212Z,1516407303.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:03.226Z,1516407303.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:03.612Z,1516407303.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:03.628Z,1516407303.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:04.019Z,1516407304.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:04.033Z,1516407304.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:04.415Z,1516407304.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:04.441Z,1516407304.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:04.816Z,1516407304.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:04.830Z,1516407304.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:05.219Z,1516407305.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:05.234Z,1516407305.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:05.630Z,1516407305.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:05.659Z,1516407305.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:06.019Z,1516407306.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:06.048Z,1516407306.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:06.411Z,1516407306.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:06.428Z,1516407306.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:06.814Z,1516407306.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:06.835Z,1516407306.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:07.214Z,1516407307.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:07.228Z,1516407307.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:07.612Z,1516407307.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:07.631Z,1516407307.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:08.022Z,1516407308.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:08.036Z,1516407308.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:08.432Z,1516407308.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:08.466Z,1516407308.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:08.818Z,1516407308.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:08.839Z,1516407308.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:09.220Z,1516407309.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:09.234Z,1516407309.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:09.610Z,1516407309.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:09.624Z,1516407309.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:10.006Z,1516407310.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:10.032Z,1516407310.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:10.416Z,1516407310.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:10.436Z,1516407310.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:10.823Z,1516407310.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:10.837Z,1516407310.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:11.226Z,1516407311.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:11.240Z,1516407311.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:11.626Z,1516407311.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:11.641Z,1516407311.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:12.028Z,1516407312.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:12.041Z,1516407312.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:12.407Z,1516407312.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:12.443Z,1516407312.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:12.822Z,1516407312.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:12.836Z,1516407312.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:13.204Z,1516407313.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:13.238Z,1516407313.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:13.603Z,1516407313.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:13.642Z,1516407313.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:14.028Z,1516407314.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:14.043Z,1516407314.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:14.431Z,1516407314.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:14.444Z,1516407314.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:17.506Z,1516407317.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:17.535Z,1516407317.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:17.638Z,1516407317.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:17.652Z,1516407317.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:17.996Z,1516407317.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:18.041Z,1516407318.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:18.396Z,1516407318.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:18.412Z,1516407318.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:18.790Z,1516407318.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:18.805Z,1516407318.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:19.209Z,1516407319.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:19.233Z,1516407319.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:19.595Z,1516407319.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:19.635Z,1516407319.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:20.006Z,1516407320.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:20.042Z,1516407320.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:20.398Z,1516407320.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:20.412Z,1516407320.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:20.796Z,1516407320.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:20.815Z,1516407320.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:21.188Z,1516407321.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:21.203Z,1516407321.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:21.592Z,1516407321.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:21.607Z,1516407321.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:21.997Z,1516407321.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:22.012Z,1516407322.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:22.397Z,1516407322.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:22.416Z,1516407322.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:22.798Z,1516407322.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:22.812Z,1516407322.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:23.196Z,1516407323.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:23.211Z,1516407323.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:23.588Z,1516407323.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:23.602Z,1516407323.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:23.997Z,1516407323.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:24.014Z,1516407324.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:24.403Z,1516407324.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:24.439Z,1516407324.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:24.801Z,1516407324.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:24.815Z,1516407324.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:25.198Z,1516407325.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:25.212Z,1516407325.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:25.595Z,1516407325.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:25.611Z,1516407325.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:26.000Z,1516407326.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:26.015Z,1516407326.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:26.401Z,1516407326.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:26.416Z,1516407326.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:26.796Z,1516407326.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:26.823Z,1516407326.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:27.195Z,1516407327.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:27.210Z,1516407327.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:27.586Z,1516407327.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:27.612Z,1516407327.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:28.006Z,1516407328.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:28.020Z,1516407328.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:28.401Z,1516407328.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:28.416Z,1516407328.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:28.803Z,1516407328.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:28.827Z,1516407328.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:29.188Z,1516407329.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:29.214Z,1516407329.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:29.579Z,1516407329.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:29.610Z,1516407329.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:29.998Z,1516407329.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:30.020Z,1516407330.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:30.402Z,1516407330.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:30.426Z,1516407330.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:30.797Z,1516407330.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:30.819Z,1516407330.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:31.188Z,1516407331.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:31.214Z,1516407331.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:31.579Z,1516407331.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:31.615Z,1516407331.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:32.006Z,1516407332.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:32.020Z,1516407332.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:32.403Z,1516407332.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:32.433Z,1516407332.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:32.806Z,1516407332.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:32.820Z,1516407332.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:33.180Z,1516407333.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:33.214Z,1516407333.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:33.583Z,1516407333.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:33.619Z,1516407333.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:34.006Z,1516407334.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:34.020Z,1516407334.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:34.406Z,1516407334.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:34.423Z,1516407334.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:34.794Z,1516407334.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:34.831Z,1516407334.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:35.188Z,1516407335.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:35.218Z,1516407335.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:35.587Z,1516407335.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:35.601Z,1516407335.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:36.002Z,1516407336.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:36.026Z,1516407336.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:36.406Z,1516407336.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:36.435Z,1516407336.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:36.801Z,1516407336.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:36.828Z,1516407336.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:37.192Z,1516407337.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:37.206Z,1516407337.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:37.591Z,1516407337.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:37.611Z,1516407337.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:38.006Z,1516407338.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:38.036Z,1516407338.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:38.410Z,1516407338.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:38.437Z,1516407338.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:38.790Z,1516407338.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:38.804Z,1516407338.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:39.193Z,1516407339.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:39.207Z,1516407339.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:39.588Z,1516407339.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:39.611Z,1516407339.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:40.006Z,1516407340.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:40.039Z,1516407340.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:40.393Z,1516407340.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:40.407Z,1516407340.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:40.794Z,1516407340.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:40.808Z,1516407340.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:41.193Z,1516407341.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:41.207Z,1516407341.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:41.586Z,1516407341.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:41.600Z,1516407341.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:41.994Z,1516407341.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:42.008Z,1516407342.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:42.406Z,1516407342.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:42.436Z,1516407342.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:42.792Z,1516407342.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:42.807Z,1516407342.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:43.193Z,1516407343.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:43.215Z,1516407343.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:43.592Z,1516407343.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:43.607Z,1516407343.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:44.006Z,1516407344.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:44.020Z,1516407344.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:44.402Z,1516407344.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:44.416Z,1516407344.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:44.798Z,1516407344.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:44.812Z,1516407344.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:45.187Z,1516407345.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:45.202Z,1516407345.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:45.590Z,1516407345.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:45.610Z,1516407345.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:45.982Z,1516407345.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:46.013Z,1516407346.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:46.405Z,1516407346.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:46.419Z,1516407346.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:46.806Z,1516407346.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:46.820Z,1516407346.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:47.198Z,1516407347.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:47.212Z,1516407347.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:47.579Z,1516407347.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:47.610Z,1516407347.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:47.000Z,1516407348.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:48.014Z,1516407348.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:48.396Z,1516407348.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:48.410Z,1516407348.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:48.779Z,1516407348.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:48.804Z,1516407348.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:49.202Z,1516407349.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:49.217Z,1516407349.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:49.602Z,1516407349.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:49.616Z,1516407349.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:50.004Z,1516407350.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:50.019Z,1516407350.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:50.392Z,1516407350.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:50.411Z,1516407350.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:50.779Z,1516407350.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:50.811Z,1516407350.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:51.179Z,1516407351.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:51.210Z,1516407351.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:51.590Z,1516407351.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:51.610Z,1516407351.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:51.978Z,1516407351.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:52.011Z,1516407352.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:52.398Z,1516407352.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:52.412Z,1516407352.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:52.806Z,1516407352.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:52.820Z,1516407352.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:53.199Z,1516407353.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:53.213Z,1516407353.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:53.579Z,1516407353.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:53.611Z,1516407353.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:53.986Z,1516407353.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:54.012Z,1516407354.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:54.388Z,1516407354.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:54.414Z,1516407354.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:54.787Z,1516407354.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:54.812Z,1516407354.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:55.210Z,1516407355.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:55.224Z,1516407355.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:55.607Z,1516407355.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:55.621Z,1516407355.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:56.002Z,1516407356.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:56.016Z,1516407356.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:56.402Z,1516407356.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:56.416Z,1516407356.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:56.785Z,1516407356.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:56.823Z,1516407356.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:57.189Z,1516407357.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:57.215Z,1516407357.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:57.586Z,1516407357.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:57.612Z,1516407357.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:57.988Z,1516407357.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:58.023Z,1516407358.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:58.400Z,1516407358.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:58.426Z,1516407358.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:58.818Z,1516407358.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:58.832Z,1516407358.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:59.195Z,1516407359.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:59.226Z,1516407359.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:59.591Z,1516407359.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:15:59.607Z,1516407359.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:15:59.991Z,1516407359.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:00.007Z,1516407360.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:00.389Z,1516407360.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:00.403Z,1516407360.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:00.789Z,1516407360.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:00.803Z,1516407360.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:01.206Z,1516407361.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:01.241Z,1516407361.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:01.606Z,1516407361.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:01.641Z,1516407361.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:02.009Z,1516407362.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:02.024Z,1516407362.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:02.397Z,1516407362.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:02.411Z,1516407362.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:02.796Z,1516407362.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:02.815Z,1516407362.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:03.195Z,1516407363.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:03.209Z,1516407363.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:03.596Z,1516407363.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:03.611Z,1516407363.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:03.995Z,1516407363.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:04.015Z,1516407364.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:04.370Z,1516407364.370 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T00:16:04.370Z,1516407364.370 [NAL9602] Data Fault, FailCount= 2
2018-01-20T00:16:04.370Z,1516407364.370 [NAL9602](ERROR): Data Fault
2018-01-20T00:16:04.406Z,1516407364.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:04.420Z,1516407364.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:04.445Z,1516407364.445 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T00:16:04.766Z,1516407364.766 [NAL9602](INFO): Powering down
2018-01-20T00:16:04.790Z,1516407364.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:04.822Z,1516407364.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:05.195Z,1516407365.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:05.208Z,1516407365.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:05.580Z,1516407365.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:05.611Z,1516407365.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:05.641Z,1516407365.641 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T00:16:05.641Z,1516407365.641 [NAL9602] No Fault, FailCount= 2
2018-01-20T00:16:05.994Z,1516407365.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:06.008Z,1516407366.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:06.394Z,1516407366.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:06.408Z,1516407366.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:06.776Z,1516407366.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:06.814Z,1516407366.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:07.183Z,1516407367.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:07.207Z,1516407367.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:07.583Z,1516407367.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:07.616Z,1516407367.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:07.980Z,1516407367.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:08.007Z,1516407368.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:08.386Z,1516407368.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:08.411Z,1516407368.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:08.787Z,1516407368.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:08.812Z,1516407368.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:09.176Z,1516407369.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:09.191Z,1516407369.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:09.583Z,1516407369.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:09.617Z,1516407369.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:09.987Z,1516407369.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:10.019Z,1516407370.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:10.376Z,1516407370.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:10.391Z,1516407370.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:10.779Z,1516407370.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:10.798Z,1516407370.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:11.187Z,1516407371.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:11.200Z,1516407371.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:11.576Z,1516407371.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:11.591Z,1516407371.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:11.986Z,1516407371.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:12.000Z,1516407372.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:12.380Z,1516407372.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:12.394Z,1516407372.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:12.780Z,1516407372.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:12.794Z,1516407372.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:13.183Z,1516407373.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:13.196Z,1516407373.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:13.587Z,1516407373.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:13.600Z,1516407373.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:13.984Z,1516407373.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:13.998Z,1516407373.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:14.391Z,1516407374.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:14.404Z,1516407374.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:14.787Z,1516407374.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:14.800Z,1516407374.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:17.879Z,1516407377.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:17.894Z,1516407377.894 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:17.894Z,1516407377.894 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-01-20T00:16:17.894Z,1516407377.894 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:16:17.896Z,1516407377.896 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:17.896Z,1516407377.896 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-01-20T00:16:17.896Z,1516407377.896 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:16:17.898Z,1516407377.898 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:17.898Z,1516407377.898 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 62
2018-01-20T00:16:17.898Z,1516407377.898 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:16:17.930Z,1516407377.930 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:16:17.930Z,1516407377.930 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:16:17.930Z,1516407377.930 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:16:18.005Z,1516407378.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:18.057Z,1516407378.057 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:16:18.057Z,1516407378.057 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-01-20T00:16:18.058Z,1516407378.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:16:18.058Z,1516407378.058 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-01-20T00:16:18.058Z,1516407378.058 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:16:18.058Z,1516407378.058 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 62
2018-01-20T00:16:18.383Z,1516407378.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:18.402Z,1516407378.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:16:18.402Z,1516407378.402 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:16:18.403Z,1516407378.403 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:16:18.403Z,1516407378.403 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:16:18.403Z,1516407378.403 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:16:18.404Z,1516407378.404 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:16:18.404Z,1516407378.404 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:16:18.404Z,1516407378.404 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:16:18.405Z,1516407378.405 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:16:18.763Z,1516407378.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:18.793Z,1516407378.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-01-20T00:16:18.794Z,1516407378.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:19.167Z,1516407379.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:19.190Z,1516407379.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-01-20T00:16:19.191Z,1516407379.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:19.567Z,1516407379.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:19.593Z,1516407379.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-01-20T00:16:19.594Z,1516407379.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:19.957Z,1516407379.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:19.971Z,1516407379.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-01-20T00:16:19.972Z,1516407379.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:20.359Z,1516407380.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:20.372Z,1516407380.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-01-20T00:16:20.373Z,1516407380.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:20.763Z,1516407380.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:20.798Z,1516407380.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-01-20T00:16:20.799Z,1516407380.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:21.171Z,1516407381.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:21.201Z,1516407381.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-01-20T00:16:21.202Z,1516407381.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:21.568Z,1516407381.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:21.581Z,1516407381.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-01-20T00:16:21.582Z,1516407381.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:21.971Z,1516407381.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:22.006Z,1516407382.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-01-20T00:16:22.007Z,1516407382.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:22.363Z,1516407382.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:22.377Z,1516407382.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-01-20T00:16:22.378Z,1516407382.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:22.765Z,1516407382.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:22.779Z,1516407382.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-01-20T00:16:22.780Z,1516407382.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:23.171Z,1516407383.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:23.190Z,1516407383.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-01-20T00:16:23.191Z,1516407383.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:23.567Z,1516407383.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:23.581Z,1516407383.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-01-20T00:16:23.582Z,1516407383.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:23.972Z,1516407383.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:23.985Z,1516407383.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-01-20T00:16:23.986Z,1516407383.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:24.372Z,1516407384.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:24.390Z,1516407384.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-01-20T00:16:24.391Z,1516407384.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:24.768Z,1516407384.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:24.782Z,1516407384.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-01-20T00:16:24.782Z,1516407384.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:25.166Z,1516407385.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:25.180Z,1516407385.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-01-20T00:16:25.181Z,1516407385.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:25.572Z,1516407385.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:25.586Z,1516407385.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-01-20T00:16:25.587Z,1516407385.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:25.965Z,1516407385.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:25.986Z,1516407385.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-01-20T00:16:25.987Z,1516407385.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:26.369Z,1516407386.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:26.390Z,1516407386.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-01-20T00:16:26.391Z,1516407386.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:26.772Z,1516407386.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:26.786Z,1516407386.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-01-20T00:16:26.787Z,1516407386.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:27.167Z,1516407387.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:27.180Z,1516407387.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-01-20T00:16:27.181Z,1516407387.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:27.565Z,1516407387.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:27.587Z,1516407387.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-01-20T00:16:27.588Z,1516407387.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:27.969Z,1516407387.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:27.991Z,1516407387.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-01-20T00:16:27.992Z,1516407387.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:28.374Z,1516407388.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:28.387Z,1516407388.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-01-20T00:16:28.388Z,1516407388.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:28.770Z,1516407388.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:28.783Z,1516407388.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-01-20T00:16:28.784Z,1516407388.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:29.167Z,1516407389.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:29.196Z,1516407389.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-01-20T00:16:29.198Z,1516407389.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:29.574Z,1516407389.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:29.588Z,1516407389.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-01-20T00:16:29.589Z,1516407389.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:29.966Z,1516407389.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:29.990Z,1516407389.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-01-20T00:16:29.991Z,1516407389.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:30.369Z,1516407390.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:30.391Z,1516407390.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-01-20T00:16:30.392Z,1516407390.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:30.776Z,1516407390.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:30.790Z,1516407390.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-01-20T00:16:30.790Z,1516407390.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:31.176Z,1516407391.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:31.189Z,1516407391.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-01-20T00:16:31.190Z,1516407391.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:31.576Z,1516407391.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:31.590Z,1516407391.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-01-20T00:16:31.591Z,1516407391.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:31.972Z,1516407391.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:31.986Z,1516407391.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-01-20T00:16:31.987Z,1516407391.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:32.372Z,1516407392.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:32.390Z,1516407392.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-01-20T00:16:32.391Z,1516407392.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:32.765Z,1516407392.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:32.787Z,1516407392.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-20T00:16:32.788Z,1516407392.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:33.160Z,1516407393.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:33.191Z,1516407393.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-01-20T00:16:33.192Z,1516407393.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:33.577Z,1516407393.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:33.598Z,1516407393.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-20T00:16:33.599Z,1516407393.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:33.958Z,1516407393.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:33.994Z,1516407393.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-20T00:16:33.995Z,1516407393.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:34.368Z,1516407394.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:34.394Z,1516407394.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-01-20T00:16:34.395Z,1516407394.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:34.759Z,1516407394.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:34.795Z,1516407394.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-01-20T00:16:34.796Z,1516407394.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:35.150Z,1516407395.150 [NAL9602](INFO): Powering up NAL9602
2018-01-20T00:16:35.184Z,1516407395.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:35.198Z,1516407395.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-01-20T00:16:35.199Z,1516407395.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:35.567Z,1516407395.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:35.594Z,1516407395.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-01-20T00:16:35.595Z,1516407395.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:35.963Z,1516407395.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:35.995Z,1516407395.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-20T00:16:35.996Z,1516407395.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:36.360Z,1516407396.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:36.390Z,1516407396.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-20T00:16:36.391Z,1516407396.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:36.767Z,1516407396.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:36.793Z,1516407396.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-20T00:16:36.794Z,1516407396.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:37.159Z,1516407397.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:37.195Z,1516407397.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-20T00:16:37.196Z,1516407397.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:37.559Z,1516407397.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:37.572Z,1516407397.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-20T00:16:37.581Z,1516407397.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:37.963Z,1516407397.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:37.990Z,1516407397.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:38.367Z,1516407398.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:38.403Z,1516407398.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:38.757Z,1516407398.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:38.771Z,1516407398.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:39.168Z,1516407399.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:39.191Z,1516407399.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:39.568Z,1516407399.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:39.582Z,1516407399.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:39.960Z,1516407399.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:39.974Z,1516407399.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:40.368Z,1516407400.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:40.383Z,1516407400.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:40.771Z,1516407400.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:40.785Z,1516407400.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:41.163Z,1516407401.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:41.176Z,1516407401.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:41.571Z,1516407401.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:41.585Z,1516407401.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:41.970Z,1516407401.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:41.984Z,1516407401.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:42.364Z,1516407402.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:42.377Z,1516407402.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:42.763Z,1516407402.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:42.786Z,1516407402.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:43.167Z,1516407403.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:43.181Z,1516407403.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:43.567Z,1516407403.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:43.581Z,1516407403.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:43.963Z,1516407403.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:43.986Z,1516407403.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:44.371Z,1516407404.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:44.385Z,1516407404.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:44.762Z,1516407404.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:44.776Z,1516407404.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:45.174Z,1516407405.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:45.188Z,1516407405.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:45.570Z,1516407405.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:45.587Z,1516407405.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:45.976Z,1516407405.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:45.995Z,1516407405.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:46.350Z,1516407406.350 [NAL9602](INFO): NAL9602 initialized
2018-01-20T00:16:46.380Z,1516407406.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:46.394Z,1516407406.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:46.771Z,1516407406.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:46.785Z,1516407406.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:47.177Z,1516407407.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:47.191Z,1516407407.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:47.575Z,1516407407.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:47.595Z,1516407407.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:47.976Z,1516407407.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:47.995Z,1516407407.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:48.375Z,1516407408.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:48.389Z,1516407408.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:48.775Z,1516407408.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:48.789Z,1516407408.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:49.171Z,1516407409.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:49.191Z,1516407409.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:49.578Z,1516407409.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:49.592Z,1516407409.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:49.982Z,1516407409.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:49.996Z,1516407409.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:50.378Z,1516407410.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:50.392Z,1516407410.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:50.776Z,1516407410.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:50.789Z,1516407410.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:51.175Z,1516407411.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:51.189Z,1516407411.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:51.575Z,1516407411.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:51.595Z,1516407411.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:51.982Z,1516407411.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:51.995Z,1516407411.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:52.378Z,1516407412.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:52.392Z,1516407412.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:52.772Z,1516407412.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:52.786Z,1516407412.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:53.172Z,1516407413.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:53.185Z,1516407413.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:53.581Z,1516407413.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:53.595Z,1516407413.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:53.980Z,1516407413.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:53.999Z,1516407413.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:54.381Z,1516407414.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:54.395Z,1516407414.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:54.776Z,1516407414.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:54.791Z,1516407414.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:55.171Z,1516407415.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:55.185Z,1516407415.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:55.578Z,1516407415.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:55.592Z,1516407415.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:55.982Z,1516407415.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:55.996Z,1516407415.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:56.380Z,1516407416.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:56.399Z,1516407416.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:56.776Z,1516407416.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:56.790Z,1516407416.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:57.175Z,1516407417.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:57.195Z,1516407417.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:57.580Z,1516407417.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:57.599Z,1516407417.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:57.987Z,1516407417.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:58.000Z,1516407418.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:58.380Z,1516407418.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:58.399Z,1516407418.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:58.776Z,1516407418.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:58.790Z,1516407418.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:59.168Z,1516407419.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:59.182Z,1516407419.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:59.581Z,1516407419.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:59.595Z,1516407419.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:16:59.982Z,1516407419.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:16:59.996Z,1516407419.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:00.381Z,1516407420.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:00.395Z,1516407420.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:00.776Z,1516407420.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:00.790Z,1516407420.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:01.171Z,1516407421.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:01.185Z,1516407421.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:01.578Z,1516407421.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:01.592Z,1516407421.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:01.982Z,1516407421.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:01.996Z,1516407421.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:02.380Z,1516407422.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:02.399Z,1516407422.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:02.777Z,1516407422.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:02.791Z,1516407422.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:03.175Z,1516407423.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:03.195Z,1516407423.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:03.580Z,1516407423.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:03.599Z,1516407423.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:03.994Z,1516407423.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:04.008Z,1516407424.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:04.380Z,1516407424.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:04.399Z,1516407424.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:04.775Z,1516407424.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:04.795Z,1516407424.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:05.177Z,1516407425.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:05.190Z,1516407425.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:05.575Z,1516407425.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:05.595Z,1516407425.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:05.980Z,1516407425.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:05.999Z,1516407425.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:06.382Z,1516407426.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:06.396Z,1516407426.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:06.780Z,1516407426.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:06.799Z,1516407426.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:07.171Z,1516407427.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:07.185Z,1516407427.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:07.569Z,1516407427.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:07.586Z,1516407427.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:07.976Z,1516407427.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:07.990Z,1516407427.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:08.371Z,1516407428.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:08.385Z,1516407428.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:08.779Z,1516407428.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:08.793Z,1516407428.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:09.182Z,1516407429.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:09.196Z,1516407429.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:09.581Z,1516407429.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:09.603Z,1516407429.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:09.972Z,1516407429.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:09.986Z,1516407429.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:10.376Z,1516407430.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:10.395Z,1516407430.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:10.773Z,1516407430.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:10.787Z,1516407430.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:11.178Z,1516407431.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:11.192Z,1516407431.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:11.576Z,1516407431.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:11.595Z,1516407431.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:11.982Z,1516407431.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:12.003Z,1516407432.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:12.382Z,1516407432.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:12.396Z,1516407432.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:12.782Z,1516407432.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:12.796Z,1516407432.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:13.175Z,1516407433.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:13.191Z,1516407433.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:13.577Z,1516407433.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:13.592Z,1516407433.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:13.977Z,1516407433.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:13.992Z,1516407433.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:14.372Z,1516407434.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:14.386Z,1516407434.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:14.780Z,1516407434.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:14.794Z,1516407434.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:15.182Z,1516407435.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:15.196Z,1516407435.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:18.282Z,1516407438.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:18.302Z,1516407438.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:18.396Z,1516407438.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:18.428Z,1516407438.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:18.787Z,1516407438.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:18.808Z,1516407438.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:19.191Z,1516407439.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:19.204Z,1516407439.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:19.584Z,1516407439.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:19.598Z,1516407439.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:20.002Z,1516407440.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:20.031Z,1516407440.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:20.402Z,1516407440.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:20.434Z,1516407440.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:20.799Z,1516407440.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:20.830Z,1516407440.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:21.184Z,1516407441.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:21.215Z,1516407441.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:21.588Z,1516407441.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:21.602Z,1516407441.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:21.989Z,1516407441.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:22.003Z,1516407442.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:22.385Z,1516407442.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:22.408Z,1516407442.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:22.794Z,1516407442.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:22.809Z,1516407442.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:23.198Z,1516407443.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:23.213Z,1516407443.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:23.594Z,1516407443.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:23.609Z,1516407443.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:23.979Z,1516407443.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:24.016Z,1516407444.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:24.377Z,1516407444.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:24.399Z,1516407444.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:24.783Z,1516407444.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:24.814Z,1516407444.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:25.184Z,1516407445.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:25.215Z,1516407445.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:25.577Z,1516407445.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:25.591Z,1516407445.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:25.994Z,1516407445.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:26.019Z,1516407446.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:26.390Z,1516407446.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:26.419Z,1516407446.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:26.786Z,1516407446.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:26.812Z,1516407446.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:27.183Z,1516407447.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:27.223Z,1516407447.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:27.587Z,1516407447.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:27.601Z,1516407447.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:27.981Z,1516407447.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:27.999Z,1516407447.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:28.387Z,1516407448.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:28.423Z,1516407448.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:28.798Z,1516407448.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:28.830Z,1516407448.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:29.186Z,1516407449.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:29.200Z,1516407449.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:29.598Z,1516407449.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:29.628Z,1516407449.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:29.984Z,1516407449.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:29.998Z,1516407449.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:30.384Z,1516407450.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:30.398Z,1516407450.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:30.788Z,1516407450.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:30.807Z,1516407450.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:31.187Z,1516407451.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:31.201Z,1516407451.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:31.582Z,1516407451.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:31.596Z,1516407451.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:32.002Z,1516407452.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:32.030Z,1516407452.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:32.402Z,1516407452.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:32.433Z,1516407452.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:32.786Z,1516407452.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:32.800Z,1516407452.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:33.188Z,1516407453.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:33.207Z,1516407453.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:33.584Z,1516407453.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:33.598Z,1516407453.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:33.989Z,1516407453.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:34.003Z,1516407454.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:34.388Z,1516407454.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:34.402Z,1516407454.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:34.802Z,1516407454.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:34.832Z,1516407454.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:35.186Z,1516407455.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:35.200Z,1516407455.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:35.594Z,1516407455.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:35.608Z,1516407455.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:35.988Z,1516407455.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:36.002Z,1516407456.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:36.380Z,1516407456.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:36.394Z,1516407456.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:36.784Z,1516407456.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:36.803Z,1516407456.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:37.188Z,1516407457.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:37.201Z,1516407457.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:37.580Z,1516407457.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:37.599Z,1516407457.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:38.002Z,1516407458.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:38.030Z,1516407458.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:38.398Z,1516407458.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:38.429Z,1516407458.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:38.786Z,1516407458.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:38.800Z,1516407458.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:39.184Z,1516407459.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:39.202Z,1516407459.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:39.589Z,1516407459.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:39.607Z,1516407459.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:39.984Z,1516407459.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:39.998Z,1516407459.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:40.384Z,1516407460.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:40.402Z,1516407460.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:40.798Z,1516407460.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:40.829Z,1516407460.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:41.192Z,1516407461.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:41.211Z,1516407461.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:41.592Z,1516407461.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:41.611Z,1516407461.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:41.992Z,1516407461.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:42.007Z,1516407462.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:42.383Z,1516407462.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:42.397Z,1516407462.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:42.787Z,1516407462.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:42.801Z,1516407462.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:43.186Z,1516407463.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:43.207Z,1516407463.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:43.582Z,1516407463.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:43.597Z,1516407463.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:43.992Z,1516407463.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:44.011Z,1516407464.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:44.398Z,1516407464.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:44.412Z,1516407464.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:44.793Z,1516407464.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:44.808Z,1516407464.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:45.191Z,1516407465.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:45.205Z,1516407465.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:45.588Z,1516407465.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:45.602Z,1516407465.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:45.991Z,1516407465.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:46.006Z,1516407466.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:46.387Z,1516407466.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:46.401Z,1516407466.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:46.793Z,1516407466.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:46.808Z,1516407466.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:47.198Z,1516407467.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:47.212Z,1516407467.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:47.594Z,1516407467.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:47.608Z,1516407467.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:47.992Z,1516407467.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:48.011Z,1516407468.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:48.391Z,1516407468.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:48.411Z,1516407468.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:48.791Z,1516407468.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:48.806Z,1516407468.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:49.186Z,1516407469.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:49.209Z,1516407469.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:49.592Z,1516407469.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:49.606Z,1516407469.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:49.997Z,1516407469.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:50.011Z,1516407470.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:50.398Z,1516407470.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:50.419Z,1516407470.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:50.798Z,1516407470.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:50.812Z,1516407470.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:51.193Z,1516407471.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:51.207Z,1516407471.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:51.594Z,1516407471.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:51.608Z,1516407471.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:51.989Z,1516407471.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:52.004Z,1516407472.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:52.388Z,1516407472.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:52.407Z,1516407472.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:52.799Z,1516407472.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:52.814Z,1516407472.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:53.198Z,1516407473.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:53.212Z,1516407473.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:53.598Z,1516407473.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:53.619Z,1516407473.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:53.994Z,1516407473.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:54.009Z,1516407474.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:54.380Z,1516407474.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:54.402Z,1516407474.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:54.788Z,1516407474.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:54.803Z,1516407474.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:55.186Z,1516407475.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:55.200Z,1516407475.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:55.578Z,1516407475.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:55.612Z,1516407475.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:55.998Z,1516407475.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:56.012Z,1516407476.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:56.398Z,1516407476.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:56.413Z,1516407476.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:56.795Z,1516407476.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:56.809Z,1516407476.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:57.188Z,1516407477.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:57.202Z,1516407477.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:57.584Z,1516407477.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:57.598Z,1516407477.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:57.984Z,1516407477.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:58.011Z,1516407478.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:58.391Z,1516407478.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:58.412Z,1516407478.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:58.802Z,1516407478.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:58.817Z,1516407478.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:59.201Z,1516407479.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:59.215Z,1516407479.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:59.598Z,1516407479.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:17:59.612Z,1516407479.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:17:59.993Z,1516407479.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:00.007Z,1516407480.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:00.389Z,1516407480.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:00.409Z,1516407480.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:00.791Z,1516407480.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:00.806Z,1516407480.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:01.176Z,1516407481.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:01.203Z,1516407481.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:01.591Z,1516407481.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:01.611Z,1516407481.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:02.001Z,1516407482.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:02.023Z,1516407482.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:02.401Z,1516407482.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:02.416Z,1516407482.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:02.801Z,1516407482.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:02.816Z,1516407482.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:03.191Z,1516407483.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:03.211Z,1516407483.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:03.575Z,1516407483.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:03.623Z,1516407483.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:03.992Z,1516407483.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:04.006Z,1516407484.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:04.386Z,1516407484.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:04.400Z,1516407484.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:04.794Z,1516407484.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:04.808Z,1516407484.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:05.200Z,1516407485.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:05.215Z,1516407485.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:05.597Z,1516407485.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:05.611Z,1516407485.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:05.975Z,1516407485.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:06.010Z,1516407486.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:06.391Z,1516407486.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:06.411Z,1516407486.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:06.782Z,1516407486.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:06.803Z,1516407486.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:07.176Z,1516407487.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:07.210Z,1516407487.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:07.575Z,1516407487.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:07.600Z,1516407487.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:07.997Z,1516407487.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:08.012Z,1516407488.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:08.398Z,1516407488.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:08.412Z,1516407488.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:08.801Z,1516407488.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:08.815Z,1516407488.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:09.186Z,1516407489.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:09.204Z,1516407489.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:09.575Z,1516407489.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:09.608Z,1516407489.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:09.993Z,1516407489.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:10.007Z,1516407490.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:10.386Z,1516407490.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:10.404Z,1516407490.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:10.794Z,1516407490.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:10.808Z,1516407490.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:11.198Z,1516407491.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:11.212Z,1516407491.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:11.598Z,1516407491.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:11.612Z,1516407491.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:11.975Z,1516407491.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:12.001Z,1516407492.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:12.391Z,1516407492.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:12.405Z,1516407492.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:12.782Z,1516407492.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:12.804Z,1516407492.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:13.176Z,1516407493.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:13.202Z,1516407493.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:13.591Z,1516407493.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:13.605Z,1516407493.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:13.997Z,1516407493.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:14.012Z,1516407494.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:14.015Z,1516407494.015 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T00:18:14.015Z,1516407494.015 [Default:CheckIn:C.Wait] Stopped
2018-01-20T00:18:14.015Z,1516407494.015 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T00:18:14.015Z,1516407494.015 [Default:CheckIn:D] Running Loop=1
2018-01-20T00:18:14.398Z,1516407494.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:14.412Z,1516407494.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:14.415Z,1516407494.415 [Default:CheckIn:D] Stopped
2018-01-20T00:18:14.415Z,1516407494.415 [Default:CheckIn:E] Running Loop=1
2018-01-20T00:18:14.801Z,1516407494.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:14.815Z,1516407494.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:14.819Z,1516407494.819 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 185.439827 min 
2018-01-20T00:18:14.819Z,1516407494.819 [Default:CheckIn:E] Stopped
2018-01-20T00:18:14.819Z,1516407494.819 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T00:18:14.819Z,1516407494.819 [Default:CheckIn] Stopped
2018-01-20T00:18:14.819Z,1516407494.819 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T00:18:14.819Z,1516407494.819 [Default:CheckIn](INFO): Running loop #19
2018-01-20T00:18:14.820Z,1516407494.820 [Default:CheckIn] Running Loop=19
2018-01-20T00:18:14.820Z,1516407494.820 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T00:18:14.820Z,1516407494.820 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T00:18:15.200Z,1516407495.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:15.214Z,1516407495.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:18.304Z,1516407498.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:18.323Z,1516407498.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:18.424Z,1516407498.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:18.459Z,1516407498.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:18.822Z,1516407498.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:18.852Z,1516407498.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:19.222Z,1516407499.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:19.254Z,1516407499.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:19.618Z,1516407499.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:19.632Z,1516407499.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:20.008Z,1516407500.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:20.023Z,1516407500.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:20.412Z,1516407500.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:20.426Z,1516407500.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:20.812Z,1516407500.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:20.831Z,1516407500.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:21.213Z,1516407501.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:21.228Z,1516407501.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:21.612Z,1516407501.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:21.626Z,1516407501.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:22.026Z,1516407502.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:22.054Z,1516407502.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:22.422Z,1516407502.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:22.436Z,1516407502.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:22.826Z,1516407502.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:22.860Z,1516407502.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:23.211Z,1516407503.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:23.231Z,1516407503.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:23.609Z,1516407503.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:23.631Z,1516407503.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:24.012Z,1516407504.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:24.026Z,1516407504.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:24.409Z,1516407504.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:24.430Z,1516407504.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:24.814Z,1516407504.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:24.828Z,1516407504.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:25.226Z,1516407505.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:25.239Z,1516407505.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:25.626Z,1516407505.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:25.640Z,1516407505.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:26.015Z,1516407506.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:26.029Z,1516407506.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:26.416Z,1516407506.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:26.429Z,1516407506.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:26.815Z,1516407506.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:26.835Z,1516407506.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:27.212Z,1516407507.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:27.226Z,1516407507.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:27.608Z,1516407507.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:27.626Z,1516407507.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:28.018Z,1516407508.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:28.033Z,1516407508.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:28.422Z,1516407508.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:28.436Z,1516407508.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:28.818Z,1516407508.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:28.832Z,1516407508.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:29.216Z,1516407509.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:29.231Z,1516407509.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:29.615Z,1516407509.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:29.630Z,1516407509.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:30.013Z,1516407510.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:30.027Z,1516407510.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:30.416Z,1516407510.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:30.430Z,1516407510.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:30.818Z,1516407510.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:30.833Z,1516407510.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:31.222Z,1516407511.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:31.236Z,1516407511.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:31.618Z,1516407511.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:31.633Z,1516407511.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:32.016Z,1516407512.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:32.030Z,1516407512.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:32.414Z,1516407512.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:32.427Z,1516407512.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:32.809Z,1516407512.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:32.828Z,1516407512.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:33.212Z,1516407513.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:33.231Z,1516407513.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:33.610Z,1516407513.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:33.624Z,1516407513.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:34.019Z,1516407514.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:34.033Z,1516407514.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:34.423Z,1516407514.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:34.443Z,1516407514.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:34.822Z,1516407514.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:34.836Z,1516407514.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:35.216Z,1516407515.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:35.231Z,1516407515.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:35.609Z,1516407515.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:35.631Z,1516407515.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:36.017Z,1516407516.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:36.033Z,1516407516.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:36.409Z,1516407516.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:36.423Z,1516407516.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:36.822Z,1516407516.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:36.838Z,1516407516.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:37.222Z,1516407517.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:37.239Z,1516407517.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:37.617Z,1516407517.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:37.632Z,1516407517.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:38.015Z,1516407518.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:38.035Z,1516407518.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:38.417Z,1516407518.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:38.430Z,1516407518.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:38.809Z,1516407518.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:38.830Z,1516407518.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:39.217Z,1516407519.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:39.231Z,1516407519.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:39.609Z,1516407519.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:39.623Z,1516407519.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:40.018Z,1516407520.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:40.039Z,1516407520.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:40.422Z,1516407520.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:40.436Z,1516407520.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:40.821Z,1516407520.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:40.835Z,1516407520.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:41.202Z,1516407521.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:41.235Z,1516407521.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:41.615Z,1516407521.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:41.629Z,1516407521.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:41.000Z,1516407522.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:42.040Z,1516407522.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:42.409Z,1516407522.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:42.427Z,1516407522.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:42.822Z,1516407522.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:42.843Z,1516407522.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:43.222Z,1516407523.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:43.237Z,1516407523.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:43.621Z,1516407523.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:43.636Z,1516407523.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:44.015Z,1516407524.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:44.029Z,1516407524.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:44.399Z,1516407524.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:44.431Z,1516407524.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:44.809Z,1516407524.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:44.826Z,1516407524.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:45.210Z,1516407525.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:45.229Z,1516407525.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:45.599Z,1516407525.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:45.633Z,1516407525.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:46.025Z,1516407526.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:46.047Z,1516407526.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:46.424Z,1516407526.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:46.443Z,1516407526.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:46.826Z,1516407526.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:46.840Z,1516407526.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:47.215Z,1516407527.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:47.235Z,1516407527.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:47.606Z,1516407527.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:47.627Z,1516407527.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:48.013Z,1516407528.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:48.027Z,1516407528.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:48.409Z,1516407528.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:48.427Z,1516407528.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:48.821Z,1516407528.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:48.836Z,1516407528.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:49.222Z,1516407529.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:49.236Z,1516407529.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:49.621Z,1516407529.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:49.636Z,1516407529.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:50.015Z,1516407530.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:50.029Z,1516407530.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:50.402Z,1516407530.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:50.437Z,1516407530.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:50.801Z,1516407530.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:50.831Z,1516407530.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:51.208Z,1516407531.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:51.233Z,1516407531.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:51.599Z,1516407531.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:51.631Z,1516407531.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:52.026Z,1516407532.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:52.040Z,1516407532.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:52.426Z,1516407532.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:52.440Z,1516407532.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:52.821Z,1516407532.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:52.835Z,1516407532.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:53.201Z,1516407533.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:53.234Z,1516407533.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:53.603Z,1516407533.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:53.634Z,1516407533.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:53.000Z,1516407534.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:54.034Z,1516407534.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:54.401Z,1516407534.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:54.434Z,1516407534.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:54.820Z,1516407534.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:54.846Z,1516407534.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:55.230Z,1516407535.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:55.244Z,1516407535.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:55.614Z,1516407535.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:55.651Z,1516407535.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:56.007Z,1516407536.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:56.043Z,1516407536.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:56.407Z,1516407536.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:56.421Z,1516407536.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:56.798Z,1516407536.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:56.812Z,1516407536.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:57.205Z,1516407537.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:57.220Z,1516407537.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:57.611Z,1516407537.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:57.625Z,1516407537.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:58.018Z,1516407538.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:58.049Z,1516407538.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:58.426Z,1516407538.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:58.455Z,1516407538.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:58.822Z,1516407538.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:58.846Z,1516407538.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:59.204Z,1516407539.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:59.223Z,1516407539.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:18:59.611Z,1516407539.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:18:59.651Z,1516407539.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:00.012Z,1516407540.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:00.026Z,1516407540.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:00.401Z,1516407540.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:00.424Z,1516407540.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:00.822Z,1516407540.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:00.845Z,1516407540.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:01.237Z,1516407541.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:01.251Z,1516407541.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:01.618Z,1516407541.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:01.648Z,1516407541.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:02.012Z,1516407542.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:02.026Z,1516407542.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:02.409Z,1516407542.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:02.422Z,1516407542.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:02.818Z,1516407542.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:02.832Z,1516407542.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:03.222Z,1516407543.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:03.236Z,1516407543.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:03.626Z,1516407543.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:03.659Z,1516407543.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:04.007Z,1516407544.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:04.022Z,1516407544.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:04.416Z,1516407544.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:04.435Z,1516407544.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:04.812Z,1516407544.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:04.826Z,1516407544.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:05.213Z,1516407545.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:05.227Z,1516407545.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:05.614Z,1516407545.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:05.628Z,1516407545.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:06.026Z,1516407546.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:06.059Z,1516407546.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:06.413Z,1516407546.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:06.427Z,1516407546.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:06.826Z,1516407546.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:06.857Z,1516407546.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:07.217Z,1516407547.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:07.231Z,1516407547.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:07.606Z,1516407547.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:07.626Z,1516407547.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:08.015Z,1516407548.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:08.035Z,1516407548.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:08.416Z,1516407548.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:08.430Z,1516407548.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:08.819Z,1516407548.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:08.833Z,1516407548.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:09.222Z,1516407549.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:09.236Z,1516407549.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:09.618Z,1516407549.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:09.638Z,1516407549.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:10.017Z,1516407550.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:10.031Z,1516407550.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:10.414Z,1516407550.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:10.431Z,1516407550.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:10.819Z,1516407550.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:10.833Z,1516407550.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:11.222Z,1516407551.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:11.237Z,1516407551.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:11.618Z,1516407551.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:11.632Z,1516407551.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:12.014Z,1516407552.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:12.032Z,1516407552.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:12.404Z,1516407552.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:12.434Z,1516407552.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:12.822Z,1516407552.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:12.843Z,1516407552.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:13.228Z,1516407553.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:13.242Z,1516407553.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:13.616Z,1516407553.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:13.648Z,1516407553.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:14.019Z,1516407554.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:14.035Z,1516407554.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:14.403Z,1516407554.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:14.430Z,1516407554.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:14.444Z,1516407554.444 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T00:19:14.823Z,1516407554.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:14.838Z,1516407554.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:15.230Z,1516407555.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:15.245Z,1516407555.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:18.330Z,1516407558.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:18.344Z,1516407558.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:18.440Z,1516407558.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:18.467Z,1516407558.467 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:18.467Z,1516407558.467 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-01-20T00:19:18.467Z,1516407558.467 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:19:18.474Z,1516407558.474 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:18.474Z,1516407558.474 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-01-20T00:19:18.474Z,1516407558.474 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:19:18.476Z,1516407558.476 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:18.476Z,1516407558.476 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 63
2018-01-20T00:19:18.476Z,1516407558.476 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:19:18.500Z,1516407558.500 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:19:18.500Z,1516407558.500 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:19:18.500Z,1516407558.500 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:19:18.833Z,1516407558.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:18.878Z,1516407558.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:19:18.879Z,1516407558.879 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-01-20T00:19:18.879Z,1516407558.879 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:19:18.879Z,1516407558.879 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-01-20T00:19:18.880Z,1516407558.880 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:19:18.880Z,1516407558.880 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 63
2018-01-20T00:19:19.237Z,1516407559.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:19.249Z,1516407559.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:19:19.250Z,1516407559.250 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:19:19.250Z,1516407559.250 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:19:19.250Z,1516407559.250 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:19:19.251Z,1516407559.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:19:19.251Z,1516407559.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:19:19.252Z,1516407559.252 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:19:19.252Z,1516407559.252 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:19:19.252Z,1516407559.252 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:19:19.628Z,1516407559.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:19.642Z,1516407559.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:19:19.643Z,1516407559.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:20.035Z,1516407560.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:20.057Z,1516407560.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:19:20.058Z,1516407560.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:20.439Z,1516407560.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:20.453Z,1516407560.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:19:20.454Z,1516407560.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:20.835Z,1516407560.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:20.856Z,1516407560.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:19:20.861Z,1516407560.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:21.223Z,1516407561.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:21.249Z,1516407561.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:19:21.250Z,1516407561.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:21.617Z,1516407561.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:21.652Z,1516407561.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:19:21.653Z,1516407561.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:22.035Z,1516407562.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:22.049Z,1516407562.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:19:22.050Z,1516407562.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:22.435Z,1516407562.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:22.451Z,1516407562.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:19:22.451Z,1516407562.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:22.834Z,1516407562.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:22.852Z,1516407562.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:19:22.853Z,1516407562.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:23.246Z,1516407563.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:23.260Z,1516407563.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:19:23.261Z,1516407563.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:23.641Z,1516407563.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:23.655Z,1516407563.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:19:23.656Z,1516407563.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:24.020Z,1516407564.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:24.047Z,1516407564.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:19:24.047Z,1516407564.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:24.417Z,1516407564.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:24.450Z,1516407564.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:19:24.451Z,1516407564.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:24.836Z,1516407564.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:24.856Z,1516407564.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:19:24.857Z,1516407564.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:25.237Z,1516407565.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:25.260Z,1516407565.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:19:25.261Z,1516407565.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:25.635Z,1516407565.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:25.655Z,1516407565.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:19:25.655Z,1516407565.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:26.037Z,1516407566.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:26.051Z,1516407566.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:19:26.051Z,1516407566.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:26.417Z,1516407566.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:26.451Z,1516407566.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:19:26.452Z,1516407566.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:26.830Z,1516407566.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:26.856Z,1516407566.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:19:26.861Z,1516407566.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:27.246Z,1516407567.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:27.266Z,1516407567.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:19:27.267Z,1516407567.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:27.643Z,1516407567.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:27.656Z,1516407567.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:19:27.657Z,1516407567.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:28.027Z,1516407568.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:28.052Z,1516407568.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:19:28.053Z,1516407568.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:28.421Z,1516407568.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:28.451Z,1516407568.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:19:28.452Z,1516407568.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:28.848Z,1516407568.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:28.861Z,1516407568.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:19:28.862Z,1516407568.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:29.247Z,1516407569.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:29.261Z,1516407569.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:19:29.262Z,1516407569.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:29.652Z,1516407569.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:29.670Z,1516407569.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:19:29.671Z,1516407569.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:30.027Z,1516407570.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:30.057Z,1516407570.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:19:30.058Z,1516407570.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:30.423Z,1516407570.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:30.456Z,1516407570.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:19:30.457Z,1516407570.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:30.848Z,1516407570.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:30.862Z,1516407570.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:19:30.863Z,1516407570.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:31.244Z,1516407571.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:31.262Z,1516407571.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T00:19:31.263Z,1516407571.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:31.635Z,1516407571.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:31.664Z,1516407571.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:19:31.664Z,1516407571.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:32.029Z,1516407572.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:32.056Z,1516407572.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:19:32.057Z,1516407572.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:32.426Z,1516407572.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:32.458Z,1516407572.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:19:32.459Z,1516407572.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:32.836Z,1516407572.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:32.864Z,1516407572.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:19:32.865Z,1516407572.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:33.252Z,1516407573.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:33.266Z,1516407573.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:19:33.267Z,1516407573.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:33.649Z,1516407573.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:33.662Z,1516407573.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:19:33.663Z,1516407573.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:34.028Z,1516407574.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:34.056Z,1516407574.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:19:34.057Z,1516407574.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:34.424Z,1516407574.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:34.451Z,1516407574.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:19:34.452Z,1516407574.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:34.849Z,1516407574.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:34.856Z,1516407574.856 [PNI_TCM](ERROR): CRC does not match. Expected:0x53545 got:0x58397
2018-01-20T00:19:34.882Z,1516407574.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:19:34.883Z,1516407574.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:35.234Z,1516407575.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:35.262Z,1516407575.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:19:35.263Z,1516407575.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:35.646Z,1516407575.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:35.660Z,1516407575.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:19:35.661Z,1516407575.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:36.029Z,1516407576.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:36.056Z,1516407576.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:19:36.057Z,1516407576.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:36.421Z,1516407576.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:36.446Z,1516407576.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:19:36.447Z,1516407576.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:36.834Z,1516407576.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:36.866Z,1516407576.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:19:36.867Z,1516407576.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:37.238Z,1516407577.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:37.270Z,1516407577.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:19:37.271Z,1516407577.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:37.626Z,1516407577.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:37.666Z,1516407577.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:19:37.667Z,1516407577.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:38.026Z,1516407578.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:38.034Z,1516407578.034 [PNI_TCM](ERROR): CRC does not match. Expected:0x45052 got:0x54080
2018-01-20T00:19:38.066Z,1516407578.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:19:38.067Z,1516407578.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:38.430Z,1516407578.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:38.459Z,1516407578.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T00:19:38.460Z,1516407578.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:38.827Z,1516407578.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:38.843Z,1516407578.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:39.235Z,1516407579.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:39.263Z,1516407579.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:39.640Z,1516407579.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:39.665Z,1516407579.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:40.027Z,1516407580.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:40.041Z,1516407580.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:40.429Z,1516407580.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:40.443Z,1516407580.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:40.845Z,1516407580.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:40.868Z,1516407580.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:41.232Z,1516407581.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:41.247Z,1516407581.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:41.639Z,1516407581.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:41.675Z,1516407581.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:42.030Z,1516407582.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:42.048Z,1516407582.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:42.429Z,1516407582.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:42.470Z,1516407582.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:42.844Z,1516407582.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:42.870Z,1516407582.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:43.243Z,1516407583.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:43.272Z,1516407583.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:43.631Z,1516407583.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:43.651Z,1516407583.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:44.029Z,1516407584.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:44.070Z,1516407584.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:44.425Z,1516407584.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:44.448Z,1516407584.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:44.843Z,1516407584.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:44.870Z,1516407584.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:45.242Z,1516407585.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:45.272Z,1516407585.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:45.630Z,1516407585.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:45.670Z,1516407585.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:46.027Z,1516407586.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:46.048Z,1516407586.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:46.430Z,1516407586.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:46.446Z,1516407586.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:46.843Z,1516407586.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:46.882Z,1516407586.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:47.242Z,1516407587.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:47.275Z,1516407587.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:47.630Z,1516407587.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:47.670Z,1516407587.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:48.030Z,1516407588.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:48.039Z,1516407588.039 [PNI_TCM](ERROR): CRC does not match. Expected:0x53138 got:0x17164
2018-01-20T00:19:48.082Z,1516407588.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:48.431Z,1516407588.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:48.451Z,1516407588.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:48.828Z,1516407588.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:48.871Z,1516407588.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:49.244Z,1516407589.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:49.280Z,1516407589.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:49.631Z,1516407589.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:49.648Z,1516407589.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:50.042Z,1516407590.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:50.056Z,1516407590.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:50.433Z,1516407590.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:50.472Z,1516407590.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:50.828Z,1516407590.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:50.844Z,1516407590.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:51.234Z,1516407591.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:51.251Z,1516407591.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:51.634Z,1516407591.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:51.649Z,1516407591.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:52.035Z,1516407592.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:52.074Z,1516407592.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:52.435Z,1516407592.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:52.453Z,1516407592.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:52.836Z,1516407592.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:52.853Z,1516407592.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:53.219Z,1516407593.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:53.247Z,1516407593.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:53.618Z,1516407593.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:53.662Z,1516407593.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:54.034Z,1516407594.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:54.051Z,1516407594.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:54.416Z,1516407594.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:54.450Z,1516407594.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:54.823Z,1516407594.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:54.864Z,1516407594.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:55.244Z,1516407595.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:55.270Z,1516407595.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:55.647Z,1516407595.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:55.666Z,1516407595.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:56.038Z,1516407596.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:56.057Z,1516407596.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:56.415Z,1516407596.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:56.457Z,1516407596.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:56.820Z,1516407596.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:56.851Z,1516407596.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:57.220Z,1516407597.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:57.251Z,1516407597.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:57.615Z,1516407597.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:57.656Z,1516407597.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:58.035Z,1516407598.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:58.060Z,1516407598.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:58.442Z,1516407598.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:58.491Z,1516407598.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:58.826Z,1516407598.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:58.861Z,1516407598.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:59.215Z,1516407599.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:59.253Z,1516407599.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:19:59.623Z,1516407599.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:19:59.658Z,1516407599.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:00.015Z,1516407600.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:00.059Z,1516407600.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:00.424Z,1516407600.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:00.456Z,1516407600.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:00.819Z,1516407600.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:00.859Z,1516407600.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:01.226Z,1516407601.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:01.258Z,1516407601.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:01.647Z,1516407601.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:01.662Z,1516407601.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:02.030Z,1516407602.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:02.055Z,1516407602.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:02.419Z,1516407602.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:02.467Z,1516407602.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:02.823Z,1516407602.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:02.862Z,1516407602.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:03.220Z,1516407603.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:03.234Z,1516407603.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:03.619Z,1516407603.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:03.633Z,1516407603.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:04.038Z,1516407604.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:04.065Z,1516407604.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:04.452Z,1516407604.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:04.475Z,1516407604.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:04.826Z,1516407604.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:04.865Z,1516407604.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:05.224Z,1516407605.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:05.239Z,1516407605.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:05.628Z,1516407605.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:05.647Z,1516407605.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:06.028Z,1516407606.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:06.042Z,1516407606.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:06.429Z,1516407606.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:06.443Z,1516407606.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:06.825Z,1516407606.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:06.847Z,1516407606.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:07.235Z,1516407607.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:07.260Z,1516407607.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:07.638Z,1516407607.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:07.660Z,1516407607.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:08.041Z,1516407608.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:08.055Z,1516407608.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:08.431Z,1516407608.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:08.445Z,1516407608.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:08.831Z,1516407608.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:08.851Z,1516407608.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:09.232Z,1516407609.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:09.246Z,1516407609.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:09.615Z,1516407609.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:09.641Z,1516407609.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:10.034Z,1516407610.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:10.048Z,1516407610.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:10.446Z,1516407610.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:10.460Z,1516407610.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:10.842Z,1516407610.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:10.865Z,1516407610.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:11.229Z,1516407611.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:11.243Z,1516407611.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:11.622Z,1516407611.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:11.644Z,1516407611.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:12.015Z,1516407612.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:12.050Z,1516407612.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:12.432Z,1516407612.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:12.446Z,1516407612.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:12.831Z,1516407612.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:12.845Z,1516407612.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:13.234Z,1516407613.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:13.248Z,1516407613.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:13.640Z,1516407613.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:13.659Z,1516407613.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:14.037Z,1516407614.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:14.051Z,1516407614.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:14.431Z,1516407614.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:14.445Z,1516407614.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:14.830Z,1516407614.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:14.844Z,1516407614.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:15.225Z,1516407615.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:15.246Z,1516407615.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:18.326Z,1516407618.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:18.347Z,1516407618.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:18.458Z,1516407618.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:18.490Z,1516407618.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:18.824Z,1516407618.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:18.838Z,1516407618.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:19.223Z,1516407619.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:19.237Z,1516407619.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:19.602Z,1516407619.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:19.636Z,1516407619.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:20.003Z,1516407620.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:20.036Z,1516407620.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:20.404Z,1516407620.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:20.440Z,1516407620.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:20.797Z,1516407620.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:20.811Z,1516407620.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:21.214Z,1516407621.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:21.235Z,1516407621.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:21.614Z,1516407621.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:21.636Z,1516407621.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:22.014Z,1516407622.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:22.043Z,1516407622.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:22.401Z,1516407622.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:22.415Z,1516407622.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:22.799Z,1516407622.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:22.813Z,1516407622.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:23.204Z,1516407623.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:23.218Z,1516407623.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:23.601Z,1516407623.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:23.615Z,1516407623.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:24.014Z,1516407624.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:24.034Z,1516407624.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:24.414Z,1516407624.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:24.428Z,1516407624.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:24.814Z,1516407624.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:24.828Z,1516407624.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:25.204Z,1516407625.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:25.227Z,1516407625.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:25.600Z,1516407625.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:25.622Z,1516407625.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:26.002Z,1516407626.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:26.022Z,1516407626.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:26.406Z,1516407626.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:26.420Z,1516407626.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:26.798Z,1516407626.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:26.820Z,1516407626.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:27.218Z,1516407627.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:27.232Z,1516407627.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:27.618Z,1516407627.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:27.632Z,1516407627.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:28.007Z,1516407628.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:28.028Z,1516407628.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:28.405Z,1516407628.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:28.420Z,1516407628.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:28.805Z,1516407628.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:28.819Z,1516407628.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:29.192Z,1516407629.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:29.219Z,1516407629.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:29.606Z,1516407629.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:29.625Z,1516407629.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:30.016Z,1516407630.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:30.030Z,1516407630.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:30.415Z,1516407630.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:30.430Z,1516407630.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:30.815Z,1516407630.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:30.835Z,1516407630.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:31.208Z,1516407631.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:31.223Z,1516407631.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:31.593Z,1516407631.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:31.619Z,1516407631.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:31.996Z,1516407631.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:32.027Z,1516407632.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:32.409Z,1516407632.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:32.423Z,1516407632.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:32.794Z,1516407632.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:32.824Z,1516407632.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:33.218Z,1516407633.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:33.232Z,1516407633.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:33.619Z,1516407633.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:33.633Z,1516407633.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:34.019Z,1516407634.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:34.039Z,1516407634.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:34.394Z,1516407634.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:34.420Z,1516407634.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:34.795Z,1516407634.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:34.852Z,1516407634.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:35.200Z,1516407635.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:35.227Z,1516407635.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:35.595Z,1516407635.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:35.620Z,1516407635.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:36.013Z,1516407636.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:36.040Z,1516407636.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:36.412Z,1516407636.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:36.430Z,1516407636.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:36.814Z,1516407636.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:36.828Z,1516407636.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:37.195Z,1516407637.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:37.226Z,1516407637.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:37.589Z,1516407637.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:37.622Z,1516407637.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:37.995Z,1516407637.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:38.020Z,1516407638.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:38.396Z,1516407638.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:38.422Z,1516407638.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:38.793Z,1516407638.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:38.819Z,1516407638.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:39.214Z,1516407639.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:39.228Z,1516407639.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:39.615Z,1516407639.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:39.634Z,1516407639.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:40.018Z,1516407640.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:40.032Z,1516407640.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:40.395Z,1516407640.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:40.427Z,1516407640.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:40.799Z,1516407640.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:40.832Z,1516407640.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:41.196Z,1516407641.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:41.222Z,1516407641.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:41.598Z,1516407641.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:41.634Z,1516407641.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:42.010Z,1516407642.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:42.036Z,1516407642.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:42.406Z,1516407642.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:42.431Z,1516407642.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:42.806Z,1516407642.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:42.831Z,1516407642.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:43.195Z,1516407643.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:43.238Z,1516407643.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:43.589Z,1516407643.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:43.603Z,1516407643.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:43.994Z,1516407643.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:44.031Z,1516407644.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:44.400Z,1516407644.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:44.414Z,1516407644.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:44.790Z,1516407644.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:44.811Z,1516407644.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:45.214Z,1516407645.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:45.243Z,1516407645.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:45.618Z,1516407645.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:45.642Z,1516407645.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:46.010Z,1516407646.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:46.040Z,1516407646.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:46.403Z,1516407646.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:46.423Z,1516407646.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:46.802Z,1516407646.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:46.815Z,1516407646.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:47.205Z,1516407647.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:47.227Z,1516407647.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:47.603Z,1516407647.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:47.623Z,1516407647.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:48.018Z,1516407648.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:48.049Z,1516407648.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:48.406Z,1516407648.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:48.420Z,1516407648.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:48.818Z,1516407648.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:48.848Z,1516407648.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:49.204Z,1516407649.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:49.217Z,1516407649.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:49.598Z,1516407649.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:49.617Z,1516407649.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:50.001Z,1516407650.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:50.023Z,1516407650.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:50.408Z,1516407650.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:50.421Z,1516407650.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:50.801Z,1516407650.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:50.815Z,1516407650.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:51.208Z,1516407651.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:51.227Z,1516407651.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:51.614Z,1516407651.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:51.627Z,1516407651.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:52.010Z,1516407652.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:52.024Z,1516407652.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:52.403Z,1516407652.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:52.417Z,1516407652.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:52.804Z,1516407652.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:52.817Z,1516407652.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:53.208Z,1516407653.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:53.222Z,1516407653.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:53.603Z,1516407653.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:53.617Z,1516407653.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:54.014Z,1516407654.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:54.028Z,1516407654.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:54.413Z,1516407654.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:54.427Z,1516407654.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:54.812Z,1516407654.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:54.831Z,1516407654.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:55.208Z,1516407655.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:55.222Z,1516407655.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:55.589Z,1516407655.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:55.619Z,1516407655.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:56.003Z,1516407656.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:56.017Z,1516407656.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:56.405Z,1516407656.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:56.418Z,1516407656.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:56.801Z,1516407656.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:56.815Z,1516407656.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:57.212Z,1516407657.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:57.231Z,1516407657.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:57.614Z,1516407657.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:57.628Z,1516407657.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:58.013Z,1516407658.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:58.027Z,1516407658.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:58.403Z,1516407658.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:58.423Z,1516407658.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:58.804Z,1516407658.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:58.818Z,1516407658.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:59.208Z,1516407659.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:59.223Z,1516407659.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:20:59.603Z,1516407659.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:20:59.617Z,1516407659.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:00.013Z,1516407660.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:00.034Z,1516407660.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:00.409Z,1516407660.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:00.423Z,1516407660.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:00.817Z,1516407660.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:00.831Z,1516407660.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:01.205Z,1516407661.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:01.218Z,1516407661.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:01.598Z,1516407661.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:01.620Z,1516407661.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:02.011Z,1516407662.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:02.026Z,1516407662.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:02.406Z,1516407662.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:02.420Z,1516407662.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:02.801Z,1516407662.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:02.819Z,1516407662.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:03.219Z,1516407663.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:03.239Z,1516407663.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:03.622Z,1516407663.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:03.636Z,1516407663.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:04.015Z,1516407664.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:04.029Z,1516407664.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:04.395Z,1516407664.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:04.427Z,1516407664.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:04.795Z,1516407664.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:04.824Z,1516407664.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:05.208Z,1516407665.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:05.223Z,1516407665.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:05.611Z,1516407665.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:05.626Z,1516407665.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:06.015Z,1516407666.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:06.029Z,1516407666.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:06.410Z,1516407666.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:06.432Z,1516407666.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:06.815Z,1516407666.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:06.829Z,1516407666.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:07.210Z,1516407667.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:07.223Z,1516407667.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:07.593Z,1516407667.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:07.619Z,1516407667.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:08.019Z,1516407668.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:08.039Z,1516407668.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:08.420Z,1516407668.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:08.434Z,1516407668.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:08.811Z,1516407668.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:08.832Z,1516407668.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:09.199Z,1516407669.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:09.231Z,1516407669.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:09.599Z,1516407669.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:09.627Z,1516407669.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:10.019Z,1516407670.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:10.039Z,1516407670.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:10.422Z,1516407670.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:10.443Z,1516407670.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:10.819Z,1516407670.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:10.833Z,1516407670.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:11.200Z,1516407671.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:11.226Z,1516407671.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:11.595Z,1516407671.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:11.620Z,1516407671.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:12.013Z,1516407672.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:12.037Z,1516407672.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:12.414Z,1516407672.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:12.428Z,1516407672.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:12.814Z,1516407672.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:12.828Z,1516407672.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:13.196Z,1516407673.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:13.227Z,1516407673.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:13.593Z,1516407673.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:13.619Z,1516407673.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:14.018Z,1516407674.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:14.032Z,1516407674.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:14.418Z,1516407674.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:14.432Z,1516407674.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:14.814Z,1516407674.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:14.828Z,1516407674.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:15.196Z,1516407675.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:15.227Z,1516407675.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:15.596Z,1516407675.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:15.627Z,1516407675.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:18.711Z,1516407678.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:18.725Z,1516407678.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:18.842Z,1516407678.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:18.875Z,1516407678.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:19.186Z,1516407679.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:19.200Z,1516407679.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:19.580Z,1516407679.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:19.593Z,1516407679.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:19.975Z,1516407679.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:19.992Z,1516407679.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:20.378Z,1516407680.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:20.392Z,1516407680.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:20.773Z,1516407680.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:20.799Z,1516407680.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:21.194Z,1516407681.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:21.223Z,1516407681.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:21.590Z,1516407681.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:21.604Z,1516407681.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:21.994Z,1516407681.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:22.008Z,1516407682.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:22.373Z,1516407682.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:22.387Z,1516407682.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:22.777Z,1516407682.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:22.799Z,1516407682.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:23.185Z,1516407683.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:23.199Z,1516407683.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:23.577Z,1516407683.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:23.591Z,1516407683.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:23.990Z,1516407683.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:24.004Z,1516407684.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:24.390Z,1516407684.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:24.403Z,1516407684.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:24.789Z,1516407684.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:24.804Z,1516407684.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:25.180Z,1516407685.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:25.194Z,1516407685.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:25.576Z,1516407685.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:25.594Z,1516407685.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:25.989Z,1516407685.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:26.004Z,1516407686.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:26.390Z,1516407686.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:26.404Z,1516407686.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:26.789Z,1516407686.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:26.803Z,1516407686.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:27.174Z,1516407687.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:27.194Z,1516407687.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:27.575Z,1516407687.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:27.597Z,1516407687.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:27.980Z,1516407687.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:27.993Z,1516407687.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:28.386Z,1516407688.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:28.400Z,1516407688.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:28.788Z,1516407688.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:28.807Z,1516407688.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:29.190Z,1516407689.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:29.203Z,1516407689.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:29.569Z,1516407689.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:29.595Z,1516407689.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:29.983Z,1516407689.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:30.003Z,1516407690.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:30.368Z,1516407690.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:30.394Z,1516407690.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:30.777Z,1516407690.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:30.796Z,1516407690.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:31.190Z,1516407691.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:31.204Z,1516407691.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:31.597Z,1516407691.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:31.611Z,1516407691.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:31.998Z,1516407691.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:32.012Z,1516407692.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:32.371Z,1516407692.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:32.403Z,1516407692.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:32.775Z,1516407692.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:32.802Z,1516407692.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:33.175Z,1516407693.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:33.200Z,1516407693.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:33.572Z,1516407693.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:33.594Z,1516407693.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:33.975Z,1516407693.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:34.008Z,1516407694.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:34.382Z,1516407694.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:34.407Z,1516407694.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:34.794Z,1516407694.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:34.808Z,1516407694.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:35.182Z,1516407695.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:35.215Z,1516407695.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:35.565Z,1516407695.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:35.580Z,1516407695.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:35.979Z,1516407695.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:36.014Z,1516407696.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:36.377Z,1516407696.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:36.390Z,1516407696.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:36.767Z,1516407696.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:36.782Z,1516407696.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:37.190Z,1516407697.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:37.215Z,1516407697.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:37.586Z,1516407697.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:37.615Z,1516407697.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:38.002Z,1516407698.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:38.016Z,1516407698.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:38.380Z,1516407698.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:38.415Z,1516407698.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:38.779Z,1516407698.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:38.794Z,1516407698.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:39.173Z,1516407699.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:39.188Z,1516407699.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:39.580Z,1516407699.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:39.595Z,1516407699.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:39.975Z,1516407699.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:39.989Z,1516407699.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:40.390Z,1516407700.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:40.421Z,1516407700.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:40.798Z,1516407700.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:40.827Z,1516407700.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:41.190Z,1516407701.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:41.222Z,1516407701.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:41.567Z,1516407701.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:41.598Z,1516407701.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:41.978Z,1516407701.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:41.993Z,1516407701.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:42.377Z,1516407702.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:42.394Z,1516407702.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:42.772Z,1516407702.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:42.799Z,1516407702.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:43.194Z,1516407703.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:43.224Z,1516407703.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:43.583Z,1516407703.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:43.602Z,1516407703.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:43.982Z,1516407703.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:43.996Z,1516407703.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:44.377Z,1516407704.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:44.407Z,1516407704.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:44.784Z,1516407704.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:44.799Z,1516407704.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:45.183Z,1516407705.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:45.199Z,1516407705.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:45.578Z,1516407705.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:45.598Z,1516407705.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:45.980Z,1516407705.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:45.994Z,1516407705.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:46.389Z,1516407706.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:46.404Z,1516407706.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:46.788Z,1516407706.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:46.807Z,1516407706.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:47.189Z,1516407707.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:47.203Z,1516407707.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:47.569Z,1516407707.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:47.595Z,1516407707.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:47.983Z,1516407707.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:48.003Z,1516407708.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:48.385Z,1516407708.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:48.399Z,1516407708.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:48.765Z,1516407708.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:48.799Z,1516407708.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:49.190Z,1516407709.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:49.204Z,1516407709.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:49.593Z,1516407709.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:49.614Z,1516407709.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:49.990Z,1516407709.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:50.004Z,1516407710.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:50.374Z,1516407710.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:50.396Z,1516407710.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:50.767Z,1516407710.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:50.801Z,1516407710.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:51.167Z,1516407711.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:51.192Z,1516407711.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:51.578Z,1516407711.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:51.605Z,1516407711.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:51.975Z,1516407711.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:52.001Z,1516407712.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:52.394Z,1516407712.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:52.408Z,1516407712.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:52.794Z,1516407712.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:52.808Z,1516407712.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:53.190Z,1516407713.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:53.204Z,1516407713.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:53.569Z,1516407713.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:53.603Z,1516407713.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:53.975Z,1516407713.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:54.006Z,1516407714.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:54.376Z,1516407714.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:54.407Z,1516407714.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:54.769Z,1516407714.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:54.783Z,1516407714.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:55.186Z,1516407715.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:55.211Z,1516407715.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:55.582Z,1516407715.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:55.608Z,1516407715.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:55.982Z,1516407715.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:56.014Z,1516407716.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:56.371Z,1516407716.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:56.407Z,1516407716.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:56.775Z,1516407716.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:56.789Z,1516407716.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:57.170Z,1516407717.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:57.191Z,1516407717.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:57.577Z,1516407717.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:57.615Z,1516407717.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:57.979Z,1516407717.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:57.998Z,1516407717.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:58.386Z,1516407718.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:58.400Z,1516407718.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:58.794Z,1516407718.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:58.823Z,1516407718.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:59.186Z,1516407719.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:59.224Z,1516407719.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:59.573Z,1516407719.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:59.587Z,1516407719.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:21:59.980Z,1516407719.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:21:59.995Z,1516407719.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:00.380Z,1516407720.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:00.399Z,1516407720.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:00.772Z,1516407720.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:00.786Z,1516407720.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:01.194Z,1516407721.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:01.223Z,1516407721.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:01.594Z,1516407721.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:01.623Z,1516407721.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:01.982Z,1516407721.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:02.003Z,1516407722.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:02.380Z,1516407722.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:02.399Z,1516407722.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:02.787Z,1516407722.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:02.823Z,1516407722.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:03.180Z,1516407723.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:03.195Z,1516407723.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:03.578Z,1516407723.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:03.593Z,1516407723.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:03.980Z,1516407723.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:03.995Z,1516407723.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:04.394Z,1516407724.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:04.408Z,1516407724.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:04.790Z,1516407724.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:04.804Z,1516407724.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:05.186Z,1516407725.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:05.200Z,1516407725.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:05.577Z,1516407725.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:05.591Z,1516407725.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:05.984Z,1516407725.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:06.003Z,1516407726.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:06.384Z,1516407726.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:06.399Z,1516407726.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:06.777Z,1516407726.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:06.791Z,1516407726.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:07.183Z,1516407727.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:07.203Z,1516407727.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:07.590Z,1516407727.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:07.604Z,1516407727.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:07.998Z,1516407727.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:08.029Z,1516407728.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:08.379Z,1516407728.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:08.393Z,1516407728.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:08.780Z,1516407728.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:08.802Z,1516407728.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:09.170Z,1516407729.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:09.192Z,1516407729.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:09.578Z,1516407729.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:09.597Z,1516407729.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:09.988Z,1516407729.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:10.003Z,1516407730.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:10.389Z,1516407730.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:10.411Z,1516407730.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:10.790Z,1516407730.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:10.804Z,1516407730.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:11.190Z,1516407731.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:11.211Z,1516407731.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:11.583Z,1516407731.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:11.603Z,1516407731.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:11.982Z,1516407731.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:12.003Z,1516407732.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:12.381Z,1516407732.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:12.396Z,1516407732.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:12.770Z,1516407732.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:12.792Z,1516407732.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:13.190Z,1516407733.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:13.204Z,1516407733.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:13.590Z,1516407733.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:13.611Z,1516407733.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:13.989Z,1516407733.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:14.003Z,1516407734.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:14.383Z,1516407734.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:14.403Z,1516407734.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:14.786Z,1516407734.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:14.800Z,1516407734.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:15.170Z,1516407735.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:15.200Z,1516407735.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:15.586Z,1516407735.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:15.600Z,1516407735.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:15.980Z,1516407735.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:15.000Z,1516407736.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:19.079Z,1516407739.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:19.099Z,1516407739.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:19.207Z,1516407739.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:19.233Z,1516407739.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:19.576Z,1516407739.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:19.590Z,1516407739.590 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:19.591Z,1516407739.591 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-01-20T00:22:19.591Z,1516407739.591 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:22:19.592Z,1516407739.592 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:19.592Z,1516407739.592 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-01-20T00:22:19.593Z,1516407739.593 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:22:19.594Z,1516407739.594 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:19.595Z,1516407739.595 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 64
2018-01-20T00:22:19.595Z,1516407739.595 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:22:19.606Z,1516407739.606 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:22:19.607Z,1516407739.607 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:22:19.607Z,1516407739.607 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:22:19.958Z,1516407739.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:19.998Z,1516407739.998 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:22:19.998Z,1516407739.998 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-01-20T00:22:19.999Z,1516407739.999 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:22:19.999Z,1516407739.999 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-01-20T00:22:19.999Z,1516407739.999 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:22:19.999Z,1516407739.999 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 64
2018-01-20T00:22:20.353Z,1516407740.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:20.367Z,1516407740.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:22:20.368Z,1516407740.368 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:22:20.368Z,1516407740.368 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:22:20.381Z,1516407740.381 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:22:20.381Z,1516407740.381 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:22:20.381Z,1516407740.381 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:22:20.382Z,1516407740.382 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:22:20.382Z,1516407740.382 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:22:20.383Z,1516407740.383 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:22:20.759Z,1516407740.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:20.792Z,1516407740.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:22:20.793Z,1516407740.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:21.167Z,1516407741.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:21.193Z,1516407741.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:22:21.194Z,1516407741.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:21.562Z,1516407741.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:21.592Z,1516407741.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:22:21.593Z,1516407741.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:21.966Z,1516407741.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:21.999Z,1516407741.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:22:22.000Z,1516407742.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:22.352Z,1516407742.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:22.365Z,1516407742.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:22:22.366Z,1516407742.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:22.748Z,1516407742.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:22.762Z,1516407742.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:22:22.763Z,1516407742.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:23.155Z,1516407743.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:23.174Z,1516407743.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:22:23.175Z,1516407743.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:23.553Z,1516407743.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:23.566Z,1516407743.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:22:23.567Z,1516407743.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:23.947Z,1516407743.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:23.965Z,1516407743.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:22:23.966Z,1516407743.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:24.362Z,1516407744.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:24.376Z,1516407744.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:22:24.377Z,1516407744.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:24.770Z,1516407744.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:24.783Z,1516407744.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:22:24.784Z,1516407744.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:25.156Z,1516407745.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:25.174Z,1516407745.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:22:25.175Z,1516407745.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:25.556Z,1516407745.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:25.574Z,1516407745.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:22:25.575Z,1516407745.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:25.957Z,1516407745.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:25.970Z,1516407745.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:22:25.971Z,1516407745.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:26.357Z,1516407746.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:26.371Z,1516407746.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:22:26.372Z,1516407746.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:26.753Z,1516407746.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:26.775Z,1516407746.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:22:26.776Z,1516407746.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:27.162Z,1516407747.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:27.176Z,1516407747.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:22:27.176Z,1516407747.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:27.559Z,1516407747.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:27.578Z,1516407747.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:22:27.579Z,1516407747.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:27.962Z,1516407747.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:27.982Z,1516407747.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:22:27.983Z,1516407747.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:28.358Z,1516407748.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:28.371Z,1516407748.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:22:28.372Z,1516407748.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:28.752Z,1516407748.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:28.769Z,1516407748.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:22:28.770Z,1516407748.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:29.155Z,1516407749.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:29.169Z,1516407749.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:22:29.170Z,1516407749.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:29.556Z,1516407749.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:29.570Z,1516407749.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:22:29.571Z,1516407749.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:29.946Z,1516407749.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:29.966Z,1516407749.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:22:29.967Z,1516407749.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:30.360Z,1516407750.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:30.378Z,1516407750.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:22:30.379Z,1516407750.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:30.766Z,1516407750.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:30.779Z,1516407750.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:22:30.780Z,1516407750.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:31.165Z,1516407751.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:31.186Z,1516407751.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:22:31.187Z,1516407751.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:31.559Z,1516407751.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:31.578Z,1516407751.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:22:31.579Z,1516407751.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:31.956Z,1516407751.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:31.970Z,1516407751.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:22:31.970Z,1516407751.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:32.360Z,1516407752.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:32.374Z,1516407752.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T00:22:32.375Z,1516407752.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:32.755Z,1516407752.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:32.768Z,1516407752.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:22:32.769Z,1516407752.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:33.165Z,1516407753.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:33.186Z,1516407753.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:22:33.187Z,1516407753.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:33.561Z,1516407753.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:33.575Z,1516407753.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:22:33.576Z,1516407753.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:33.965Z,1516407753.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:33.979Z,1516407753.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:22:33.980Z,1516407753.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:34.360Z,1516407754.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:34.374Z,1516407754.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:22:34.375Z,1516407754.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:34.753Z,1516407754.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:34.767Z,1516407754.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:22:34.768Z,1516407754.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:35.150Z,1516407755.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:35.171Z,1516407755.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:22:35.172Z,1516407755.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:35.564Z,1516407755.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:35.578Z,1516407755.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:22:35.579Z,1516407755.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:35.945Z,1516407755.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:35.975Z,1516407755.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:22:35.976Z,1516407755.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:36.368Z,1516407756.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:36.386Z,1516407756.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:22:36.387Z,1516407756.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:36.770Z,1516407756.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:36.784Z,1516407756.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:22:36.784Z,1516407756.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:37.166Z,1516407757.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:37.179Z,1516407757.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:22:37.180Z,1516407757.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:37.550Z,1516407757.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:37.572Z,1516407757.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:22:37.573Z,1516407757.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:37.952Z,1516407757.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:37.974Z,1516407757.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:22:37.975Z,1516407757.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:38.360Z,1516407758.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:38.374Z,1516407758.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:22:38.375Z,1516407758.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:38.762Z,1516407758.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:38.776Z,1516407758.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:22:38.777Z,1516407758.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:39.170Z,1516407759.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:39.190Z,1516407759.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:22:39.191Z,1516407759.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:39.565Z,1516407759.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:39.579Z,1516407759.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T00:22:39.580Z,1516407759.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:39.968Z,1516407759.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:39.987Z,1516407759.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:40.360Z,1516407760.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:40.379Z,1516407760.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:40.749Z,1516407760.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:40.771Z,1516407760.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:41.159Z,1516407761.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:41.179Z,1516407761.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:41.548Z,1516407761.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:41.587Z,1516407761.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:41.951Z,1516407761.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:41.976Z,1516407761.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:42.366Z,1516407762.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:42.380Z,1516407762.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:42.771Z,1516407762.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:42.785Z,1516407762.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:43.170Z,1516407763.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:43.184Z,1516407763.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:43.563Z,1516407763.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:43.577Z,1516407763.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:43.964Z,1516407763.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:43.983Z,1516407763.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:44.352Z,1516407764.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:44.377Z,1516407764.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:44.747Z,1516407764.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:44.772Z,1516407764.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:45.174Z,1516407765.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:45.188Z,1516407765.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:45.573Z,1516407765.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:45.587Z,1516407765.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:45.966Z,1516407765.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:45.980Z,1516407765.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:46.348Z,1516407766.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:46.375Z,1516407766.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:46.745Z,1516407766.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:46.778Z,1516407766.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:47.174Z,1516407767.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:47.188Z,1516407767.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:47.575Z,1516407767.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:47.589Z,1516407767.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:47.970Z,1516407767.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:47.984Z,1516407767.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:48.350Z,1516407768.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:48.380Z,1516407768.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:48.751Z,1516407768.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:48.783Z,1516407768.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:49.167Z,1516407769.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:49.181Z,1516407769.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:49.567Z,1516407769.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:49.586Z,1516407769.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:49.974Z,1516407769.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:49.995Z,1516407769.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:50.349Z,1516407770.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:50.379Z,1516407770.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:50.748Z,1516407770.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:50.774Z,1516407770.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:51.171Z,1516407771.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:51.186Z,1516407771.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:51.559Z,1516407771.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:51.593Z,1516407771.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:51.971Z,1516407771.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:51.985Z,1516407771.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:52.348Z,1516407772.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:52.383Z,1516407772.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:52.751Z,1516407772.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:52.786Z,1516407772.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:53.175Z,1516407773.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:53.189Z,1516407773.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:53.558Z,1516407773.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:53.595Z,1516407773.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:53.966Z,1516407773.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:53.992Z,1516407773.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:54.356Z,1516407774.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:54.390Z,1516407774.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:54.754Z,1516407774.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:54.767Z,1516407774.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:55.166Z,1516407775.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:55.197Z,1516407775.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:55.570Z,1516407775.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:55.594Z,1516407775.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:55.966Z,1516407775.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:55.999Z,1516407775.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:56.356Z,1516407776.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:56.371Z,1516407776.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:56.757Z,1516407776.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:56.779Z,1516407776.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:57.166Z,1516407777.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:57.180Z,1516407777.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:57.567Z,1516407777.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:57.587Z,1516407777.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:57.966Z,1516407777.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:57.980Z,1516407777.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:58.364Z,1516407778.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:58.377Z,1516407778.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:58.760Z,1516407778.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:58.775Z,1516407778.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:59.163Z,1516407779.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:59.178Z,1516407779.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:59.565Z,1516407779.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:59.579Z,1516407779.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:22:59.970Z,1516407779.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:22:59.984Z,1516407779.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:00.359Z,1516407780.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:00.375Z,1516407780.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:00.760Z,1516407780.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:00.774Z,1516407780.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:01.164Z,1516407781.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:01.179Z,1516407781.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:01.563Z,1516407781.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:01.577Z,1516407781.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:01.966Z,1516407781.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:01.987Z,1516407781.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:02.405Z,1516407782.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:02.419Z,1516407782.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:02.755Z,1516407782.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:02.775Z,1516407782.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:03.165Z,1516407783.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:03.179Z,1516407783.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:03.566Z,1516407783.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:03.580Z,1516407783.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:03.962Z,1516407783.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:03.976Z,1516407783.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:04.354Z,1516407784.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:04.370Z,1516407784.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:04.762Z,1516407784.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:04.776Z,1516407784.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:05.162Z,1516407785.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:05.176Z,1516407785.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:05.561Z,1516407785.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:05.582Z,1516407785.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:05.968Z,1516407785.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:05.987Z,1516407785.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:06.363Z,1516407786.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:06.378Z,1516407786.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:06.763Z,1516407786.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:06.777Z,1516407786.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:07.166Z,1516407787.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:07.180Z,1516407787.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:07.566Z,1516407787.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:07.580Z,1516407787.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:07.966Z,1516407787.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:07.980Z,1516407787.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:08.363Z,1516407788.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:08.377Z,1516407788.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:08.760Z,1516407788.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:08.774Z,1516407788.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:09.165Z,1516407789.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:09.180Z,1516407789.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:09.568Z,1516407789.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:09.587Z,1516407789.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:09.967Z,1516407789.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:09.987Z,1516407789.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:10.362Z,1516407790.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:10.376Z,1516407790.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:10.759Z,1516407790.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:10.806Z,1516407790.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:11.166Z,1516407791.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:11.173Z,1516407791.173 [PNI_TCM](ERROR): CRC does not match. Expected:0x65284 got:0x16816
2018-01-20T00:23:11.208Z,1516407791.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:11.569Z,1516407791.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:11.583Z,1516407791.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:11.966Z,1516407791.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:11.986Z,1516407791.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:12.360Z,1516407792.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:12.406Z,1516407792.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:12.763Z,1516407792.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:12.769Z,1516407792.769 [PNI_TCM](ERROR): CRC does not match. Expected:0x29983 got:0x7361
2018-01-20T00:23:12.787Z,1516407792.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:13.168Z,1516407793.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:13.187Z,1516407793.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:13.566Z,1516407793.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:13.580Z,1516407793.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:13.968Z,1516407793.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:13.984Z,1516407793.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:14.362Z,1516407794.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:14.378Z,1516407794.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:14.758Z,1516407794.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:14.772Z,1516407794.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:15.167Z,1516407795.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:15.186Z,1516407795.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:15.190Z,1516407795.190 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T00:18:14.8Z
2018-01-20T00:23:15.190Z,1516407795.190 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T00:23:15.190Z,1516407795.190 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T00:23:15.564Z,1516407795.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:15.604Z,1516407795.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:16.018Z,1516407796.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:16.025Z,1516407796.025 [PNI_TCM](ERROR): CRC does not match. Expected:0x57371 got:0x7361
2018-01-20T00:23:16.062Z,1516407796.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:16.359Z,1516407796.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:16.373Z,1516407796.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:19.454Z,1516407799.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:19.469Z,1516407799.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:19.550Z,1516407799.550 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0076.lzma
2018-01-20T00:23:19.573Z,1516407799.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:19.687Z,1516407799.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:19.934Z,1516407799.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:19.967Z,1516407799.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:20.700Z,1516407800.700 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0076.lzma.bak
2018-01-20T00:23:20.700Z,1516407800.700 [DataOverHttps](INFO): SBD MOMSN=7725252
2018-01-20T00:23:20.750Z,1516407800.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:20.774Z,1516407800.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:20.974Z,1516407800.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:20.992Z,1516407800.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:21.224Z,1516407801.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:21.246Z,1516407801.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:24.319Z,1516407804.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:24.333Z,1516407804.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:24.434Z,1516407804.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:24.448Z,1516407804.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:24.802Z,1516407804.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:24.823Z,1516407804.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:25.204Z,1516407805.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:25.227Z,1516407805.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:25.588Z,1516407805.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:25.607Z,1516407805.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:25.989Z,1516407805.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:26.003Z,1516407806.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:29.080Z,1516407809.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:29.098Z,1516407809.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:29.179Z,1516407809.179 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180119T210901/Express0077.lzma
2018-01-20T00:23:29.201Z,1516407809.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:29.236Z,1516407809.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:29.598Z,1516407809.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:29.624Z,1516407809.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:29.959Z,1516407809.959 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0077.lzma.bak
2018-01-20T00:23:29.959Z,1516407809.959 [DataOverHttps](INFO): SBD MOMSN=7725254
2018-01-20T00:23:30.012Z,1516407810.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:30.040Z,1516407810.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:30.483Z,1516407810.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:30.503Z,1516407810.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:30.506Z,1516407810.506 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T00:23:30.506Z,1516407810.506 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T00:23:30.506Z,1516407810.506 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T00:23:30.791Z,1516407810.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:30.811Z,1516407810.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:33.888Z,1516407813.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:33.902Z,1516407813.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:34.001Z,1516407814.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:34.015Z,1516407814.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:34.402Z,1516407814.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:34.417Z,1516407814.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:34.812Z,1516407814.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:34.840Z,1516407814.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:35.201Z,1516407815.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:35.216Z,1516407815.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:35.606Z,1516407815.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:35.620Z,1516407815.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:35.000Z,1516407816.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:36.015Z,1516407816.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:36.398Z,1516407816.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:36.442Z,1516407816.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:36.798Z,1516407816.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:36.807Z,1516407816.807 [PNI_TCM](ERROR): CRC does not match. Expected:0x45814 got:0x5763
2018-01-20T00:23:36.843Z,1516407816.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:37.207Z,1516407817.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:37.221Z,1516407817.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:37.603Z,1516407817.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:37.623Z,1516407817.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:38.002Z,1516407818.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:38.020Z,1516407818.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:38.403Z,1516407818.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:38.418Z,1516407818.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:38.795Z,1516407818.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:38.813Z,1516407818.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:39.203Z,1516407819.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:39.219Z,1516407819.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:39.602Z,1516407819.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:39.638Z,1516407819.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:40.001Z,1516407820.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:40.014Z,1516407820.014 [PNI_TCM](ERROR): CRC does not match. Expected:0x25555 got:0x33658
2018-01-20T00:23:40.039Z,1516407820.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:40.395Z,1516407820.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:40.415Z,1516407820.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:40.802Z,1516407820.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:40.816Z,1516407820.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:41.202Z,1516407821.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:41.242Z,1516407821.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:41.606Z,1516407821.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:41.613Z,1516407821.613 [PNI_TCM](ERROR): CRC does not match. Expected:0x58894 got:0x6593
2018-01-20T00:23:41.647Z,1516407821.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:42.005Z,1516407822.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:42.019Z,1516407822.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:42.400Z,1516407822.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:42.416Z,1516407822.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:42.794Z,1516407822.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:42.839Z,1516407822.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:43.198Z,1516407823.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:43.217Z,1516407823.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:43.604Z,1516407823.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:43.623Z,1516407823.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:44.003Z,1516407824.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:44.019Z,1516407824.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:44.397Z,1516407824.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:44.426Z,1516407824.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:44.789Z,1516407824.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:44.805Z,1516407824.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:45.203Z,1516407825.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:45.218Z,1516407825.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:45.604Z,1516407825.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:45.618Z,1516407825.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:46.000Z,1516407826.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:46.041Z,1516407826.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:46.391Z,1516407826.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:46.406Z,1516407826.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:46.788Z,1516407826.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:46.807Z,1516407826.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:47.197Z,1516407827.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:47.219Z,1516407827.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:47.602Z,1516407827.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:47.647Z,1516407827.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:48.005Z,1516407828.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:48.023Z,1516407828.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:48.408Z,1516407828.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:48.427Z,1516407828.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:48.799Z,1516407828.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:48.819Z,1516407828.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:49.195Z,1516407829.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:49.219Z,1516407829.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:49.590Z,1516407829.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:49.604Z,1516407829.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:49.986Z,1516407829.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:50.013Z,1516407830.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:50.414Z,1516407830.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:50.427Z,1516407830.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:50.805Z,1516407830.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:50.848Z,1516407830.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:51.204Z,1516407831.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:51.239Z,1516407831.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:51.622Z,1516407831.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:51.663Z,1516407831.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:51.985Z,1516407831.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:52.023Z,1516407832.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:52.383Z,1516407832.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:52.418Z,1516407832.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:52.791Z,1516407832.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:52.830Z,1516407832.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:53.185Z,1516407833.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:53.204Z,1516407833.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:53.611Z,1516407833.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:53.636Z,1516407833.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:54.012Z,1516407834.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:54.066Z,1516407834.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:54.396Z,1516407834.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:54.443Z,1516407834.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:54.789Z,1516407834.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:54.851Z,1516407834.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:55.185Z,1516407835.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:55.239Z,1516407835.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:55.586Z,1516407835.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:55.643Z,1516407835.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:55.993Z,1516407835.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:56.047Z,1516407836.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:56.396Z,1516407836.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:56.440Z,1516407836.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:56.800Z,1516407836.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:56.862Z,1516407836.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:57.199Z,1516407837.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:57.269Z,1516407837.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:57.594Z,1516407837.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:57.654Z,1516407837.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:57.993Z,1516407837.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:58.023Z,1516407838.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:58.412Z,1516407838.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:58.431Z,1516407838.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:58.786Z,1516407838.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:58.820Z,1516407838.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:59.211Z,1516407839.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:59.239Z,1516407839.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:23:59.596Z,1516407839.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:23:59.635Z,1516407839.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:00.004Z,1516407840.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:00.075Z,1516407840.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:00.454Z,1516407840.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:00.489Z,1516407840.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:00.796Z,1516407840.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:00.858Z,1516407840.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:01.193Z,1516407841.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:01.258Z,1516407841.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:01.586Z,1516407841.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:01.623Z,1516407841.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:01.985Z,1516407841.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:02.030Z,1516407842.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:02.394Z,1516407842.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:02.423Z,1516407842.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:02.802Z,1516407842.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:02.831Z,1516407842.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:03.202Z,1516407843.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:03.231Z,1516407843.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:03.588Z,1516407843.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:03.619Z,1516407843.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:03.987Z,1516407843.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:04.023Z,1516407844.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:04.391Z,1516407844.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:04.428Z,1516407844.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:04.796Z,1516407844.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:04.810Z,1516407844.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:05.184Z,1516407845.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:05.199Z,1516407845.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:05.602Z,1516407845.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:05.632Z,1516407845.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:05.998Z,1516407845.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:06.011Z,1516407846.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:06.398Z,1516407846.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:06.412Z,1516407846.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:06.789Z,1516407846.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:06.807Z,1516407846.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:07.188Z,1516407847.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:07.201Z,1516407847.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:07.593Z,1516407847.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:07.607Z,1516407847.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:07.992Z,1516407847.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:08.011Z,1516407848.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:08.406Z,1516407848.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:08.420Z,1516407848.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:08.798Z,1516407848.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:08.812Z,1516407848.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:09.206Z,1516407849.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:09.220Z,1516407849.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:09.596Z,1516407849.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:09.610Z,1516407849.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:09.995Z,1516407849.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:10.010Z,1516407850.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:10.391Z,1516407850.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:10.406Z,1516407850.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:10.789Z,1516407850.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:10.803Z,1516407850.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:11.191Z,1516407851.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:11.206Z,1516407851.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:11.598Z,1516407851.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:11.612Z,1516407851.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:11.997Z,1516407851.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:12.011Z,1516407852.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:12.397Z,1516407852.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:12.411Z,1516407852.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:12.792Z,1516407852.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:12.806Z,1516407852.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:13.193Z,1516407853.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:13.207Z,1516407853.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:13.596Z,1516407853.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:13.610Z,1516407853.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:13.995Z,1516407853.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:14.010Z,1516407854.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:14.399Z,1516407854.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:14.413Z,1516407854.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:14.798Z,1516407854.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:14.812Z,1516407854.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:15.198Z,1516407855.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:15.219Z,1516407855.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:15.590Z,1516407855.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:15.604Z,1516407855.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:15.988Z,1516407855.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:16.015Z,1516407856.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:16.394Z,1516407856.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:16.408Z,1516407856.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:16.794Z,1516407856.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:16.808Z,1516407856.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:17.196Z,1516407857.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:17.214Z,1516407857.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:17.606Z,1516407857.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:17.620Z,1516407857.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:18.006Z,1516407858.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:18.020Z,1516407858.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:18.402Z,1516407858.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:18.417Z,1516407858.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:18.788Z,1516407858.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:18.810Z,1516407858.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:19.180Z,1516407859.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:19.207Z,1516407859.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:19.580Z,1516407859.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:19.607Z,1516407859.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:19.994Z,1516407859.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:20.015Z,1516407860.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:20.398Z,1516407860.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:20.426Z,1516407860.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:20.797Z,1516407860.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:20.812Z,1516407860.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:21.202Z,1516407861.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:21.219Z,1516407861.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:21.579Z,1516407861.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:21.605Z,1516407861.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:21.995Z,1516407861.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:22.010Z,1516407862.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:22.399Z,1516407862.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:22.420Z,1516407862.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:22.780Z,1516407862.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:22.807Z,1516407862.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:23.196Z,1516407863.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:23.210Z,1516407863.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:23.602Z,1516407863.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:23.616Z,1516407863.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:24.002Z,1516407864.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:24.019Z,1516407864.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:24.394Z,1516407864.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:24.415Z,1516407864.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:24.794Z,1516407864.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:24.812Z,1516407864.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:25.183Z,1516407865.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:25.209Z,1516407865.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:25.580Z,1516407865.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:25.607Z,1516407865.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:25.987Z,1516407865.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:26.012Z,1516407866.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:26.399Z,1516407866.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:26.413Z,1516407866.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:26.794Z,1516407866.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:26.815Z,1516407866.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:27.198Z,1516407867.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:27.227Z,1516407867.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:27.579Z,1516407867.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:27.611Z,1516407867.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:27.979Z,1516407867.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:28.011Z,1516407868.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:28.387Z,1516407868.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:28.412Z,1516407868.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:28.780Z,1516407868.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:28.815Z,1516407868.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:29.187Z,1516407869.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:29.212Z,1516407869.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:29.602Z,1516407869.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:29.617Z,1516407869.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:30.003Z,1516407870.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:30.017Z,1516407870.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:30.402Z,1516407870.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:30.416Z,1516407870.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:30.783Z,1516407870.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:30.815Z,1516407870.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:31.188Z,1516407871.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:31.219Z,1516407871.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:34.303Z,1516407874.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:34.318Z,1516407874.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:34.422Z,1516407874.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:34.466Z,1516407874.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:34.786Z,1516407874.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:34.816Z,1516407874.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:35.182Z,1516407875.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:35.195Z,1516407875.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:35.586Z,1516407875.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:35.615Z,1516407875.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:35.969Z,1516407875.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:35.987Z,1516407875.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:36.372Z,1516407876.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:36.386Z,1516407876.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:36.773Z,1516407876.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:36.795Z,1516407876.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:37.172Z,1516407877.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:37.186Z,1516407877.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:37.586Z,1516407877.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:37.600Z,1516407877.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:37.978Z,1516407877.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:37.992Z,1516407877.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:38.386Z,1516407878.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:38.400Z,1516407878.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:38.775Z,1516407878.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:38.789Z,1516407878.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:39.175Z,1516407879.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:39.189Z,1516407879.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:39.575Z,1516407879.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:39.589Z,1516407879.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:39.979Z,1516407879.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:39.993Z,1516407879.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:40.378Z,1516407880.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:40.393Z,1516407880.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:40.782Z,1516407880.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:40.796Z,1516407880.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:41.178Z,1516407881.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:41.198Z,1516407881.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:41.575Z,1516407881.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:41.589Z,1516407881.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:41.975Z,1516407881.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:41.989Z,1516407881.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:42.368Z,1516407882.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:42.382Z,1516407882.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:42.775Z,1516407882.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:42.795Z,1516407882.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:43.174Z,1516407883.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:43.188Z,1516407883.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:43.577Z,1516407883.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:43.598Z,1516407883.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:43.978Z,1516407883.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:43.992Z,1516407883.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:44.378Z,1516407884.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:44.392Z,1516407884.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:44.768Z,1516407884.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:44.782Z,1516407884.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:45.175Z,1516407885.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:45.189Z,1516407885.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:45.575Z,1516407885.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:45.589Z,1516407885.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:46.015Z,1516407886.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:46.029Z,1516407886.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:46.378Z,1516407886.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:46.393Z,1516407886.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:46.782Z,1516407886.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:46.796Z,1516407886.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:47.178Z,1516407887.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:47.198Z,1516407887.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:47.573Z,1516407887.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:47.587Z,1516407887.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:47.971Z,1516407887.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:47.986Z,1516407887.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:48.373Z,1516407888.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:48.387Z,1516407888.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:48.765Z,1516407888.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:48.787Z,1516407888.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:49.176Z,1516407889.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:49.190Z,1516407889.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:49.579Z,1516407889.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:49.592Z,1516407889.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:49.975Z,1516407889.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:50.003Z,1516407890.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:50.381Z,1516407890.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:50.395Z,1516407890.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:50.777Z,1516407890.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:50.791Z,1516407890.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:51.177Z,1516407891.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:51.191Z,1516407891.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:51.578Z,1516407891.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:51.592Z,1516407891.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:51.977Z,1516407891.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:51.991Z,1516407891.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:52.382Z,1516407892.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:52.403Z,1516407892.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:52.781Z,1516407892.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:52.796Z,1516407892.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:53.194Z,1516407893.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:53.208Z,1516407893.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:53.562Z,1516407893.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:53.576Z,1516407893.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:53.971Z,1516407893.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:54.005Z,1516407894.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:54.372Z,1516407894.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:54.398Z,1516407894.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:54.774Z,1516407894.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:54.788Z,1516407894.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:55.170Z,1516407895.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:55.184Z,1516407895.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:55.582Z,1516407895.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:55.615Z,1516407895.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:55.971Z,1516407895.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:55.986Z,1516407895.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:56.383Z,1516407896.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:56.413Z,1516407896.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:56.776Z,1516407896.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:56.790Z,1516407896.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:57.171Z,1516407897.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:57.187Z,1516407897.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:57.571Z,1516407897.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:57.586Z,1516407897.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:57.970Z,1516407897.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:57.992Z,1516407897.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:58.382Z,1516407898.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:58.414Z,1516407898.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:58.786Z,1516407898.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:58.821Z,1516407898.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:59.186Z,1516407899.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:59.200Z,1516407899.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:59.561Z,1516407899.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:59.581Z,1516407899.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:24:59.969Z,1516407899.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:24:59.987Z,1516407899.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:00.368Z,1516407900.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:00.381Z,1516407900.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:00.764Z,1516407900.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:00.785Z,1516407900.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:01.171Z,1516407901.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:01.185Z,1516407901.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:01.579Z,1516407901.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:01.592Z,1516407901.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:01.981Z,1516407901.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:01.995Z,1516407901.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:02.380Z,1516407902.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:02.399Z,1516407902.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:02.776Z,1516407902.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:02.789Z,1516407902.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:03.176Z,1516407903.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:03.190Z,1516407903.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:03.569Z,1516407903.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:03.588Z,1516407903.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:03.981Z,1516407903.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:04.003Z,1516407904.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:04.384Z,1516407904.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:04.403Z,1516407904.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:04.780Z,1516407904.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:04.799Z,1516407904.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:05.176Z,1516407905.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:05.189Z,1516407905.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:05.569Z,1516407905.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:05.583Z,1516407905.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:05.971Z,1516407905.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:05.985Z,1516407905.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:06.369Z,1516407906.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:06.386Z,1516407906.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:06.769Z,1516407906.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:06.783Z,1516407906.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:07.180Z,1516407907.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:07.199Z,1516407907.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:07.582Z,1516407907.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:07.596Z,1516407907.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:07.981Z,1516407907.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:07.995Z,1516407907.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:08.371Z,1516407908.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:08.385Z,1516407908.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:08.772Z,1516407908.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:08.790Z,1516407908.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:09.176Z,1516407909.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:09.190Z,1516407909.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:09.575Z,1516407909.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:09.595Z,1516407909.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:09.994Z,1516407909.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:10.008Z,1516407910.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:10.380Z,1516407910.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:10.399Z,1516407910.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:10.781Z,1516407910.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:10.803Z,1516407910.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:11.176Z,1516407911.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:11.190Z,1516407911.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:11.569Z,1516407911.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:11.583Z,1516407911.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:11.966Z,1516407911.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:11.987Z,1516407911.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:12.368Z,1516407912.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:12.386Z,1516407912.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:12.769Z,1516407912.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:12.783Z,1516407912.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:13.180Z,1516407913.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:13.199Z,1516407913.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:13.582Z,1516407913.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:13.596Z,1516407913.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:13.981Z,1516407913.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:13.995Z,1516407913.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:14.375Z,1516407914.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:14.395Z,1516407914.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:14.776Z,1516407914.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:14.789Z,1516407914.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:15.176Z,1516407915.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:15.190Z,1516407915.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:15.571Z,1516407915.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:15.585Z,1516407915.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:15.981Z,1516407915.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:15.995Z,1516407915.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:16.382Z,1516407916.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:16.396Z,1516407916.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:16.780Z,1516407916.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:16.799Z,1516407916.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:17.176Z,1516407917.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:17.190Z,1516407917.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:17.569Z,1516407917.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:17.583Z,1516407917.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:17.966Z,1516407917.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:17.988Z,1516407917.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:18.368Z,1516407918.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:18.386Z,1516407918.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:18.769Z,1516407918.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:18.783Z,1516407918.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:19.180Z,1516407919.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:19.199Z,1516407919.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:19.582Z,1516407919.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:19.596Z,1516407919.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:19.981Z,1516407919.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:19.995Z,1516407919.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:20.375Z,1516407920.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:20.395Z,1516407920.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:20.395Z,1516407920.395 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-01-20T00:25:20.395Z,1516407920.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:25:20.397Z,1516407920.397 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:20.397Z,1516407920.397 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-01-20T00:25:20.397Z,1516407920.397 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:25:20.399Z,1516407920.399 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:20.399Z,1516407920.399 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 65
2018-01-20T00:25:20.399Z,1516407920.399 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:25:20.427Z,1516407920.427 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:25:20.427Z,1516407920.427 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:25:20.427Z,1516407920.427 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:25:20.759Z,1516407920.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:20.803Z,1516407920.803 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:25:20.803Z,1516407920.803 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-01-20T00:25:20.804Z,1516407920.804 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:25:20.804Z,1516407920.804 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-01-20T00:25:20.804Z,1516407920.804 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:25:20.804Z,1516407920.804 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 65
2018-01-20T00:25:21.160Z,1516407921.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:21.185Z,1516407921.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:25:21.185Z,1516407921.185 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:25:21.186Z,1516407921.186 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:25:21.186Z,1516407921.186 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:25:21.186Z,1516407921.186 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:25:21.187Z,1516407921.187 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:25:21.187Z,1516407921.187 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:25:21.188Z,1516407921.188 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:25:21.188Z,1516407921.188 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:25:21.583Z,1516407921.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:21.599Z,1516407921.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:25:21.599Z,1516407921.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:21.987Z,1516407921.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:22.000Z,1516407922.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:25:22.001Z,1516407922.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:22.388Z,1516407922.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:22.406Z,1516407922.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:25:22.407Z,1516407922.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:22.785Z,1516407922.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:22.799Z,1516407922.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:25:22.800Z,1516407922.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:23.159Z,1516407923.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:23.190Z,1516407923.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:25:23.191Z,1516407923.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:23.561Z,1516407923.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:23.587Z,1516407923.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:25:23.588Z,1516407923.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:23.967Z,1516407923.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:23.992Z,1516407923.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:25:23.993Z,1516407923.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:24.360Z,1516407924.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:24.390Z,1516407924.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:25:24.391Z,1516407924.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:24.757Z,1516407924.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:24.779Z,1516407924.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:25:24.780Z,1516407924.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:25.186Z,1516407925.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:25.200Z,1516407925.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:25:25.201Z,1516407925.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:25.583Z,1516407925.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:25.596Z,1516407925.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:25:25.597Z,1516407925.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:25.970Z,1516407925.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:26.002Z,1516407926.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:25:26.003Z,1516407926.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:26.363Z,1516407926.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:26.394Z,1516407926.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:25:26.395Z,1516407926.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:26.763Z,1516407926.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:26.799Z,1516407926.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:25:26.800Z,1516407926.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:27.168Z,1516407927.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:27.193Z,1516407927.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:25:27.194Z,1516407927.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:27.564Z,1516407927.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:27.594Z,1516407927.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:25:27.595Z,1516407927.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:27.991Z,1516407927.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:28.004Z,1516407928.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:25:28.005Z,1516407928.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:28.382Z,1516407928.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:28.396Z,1516407928.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:25:28.397Z,1516407928.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:28.778Z,1516407928.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:28.800Z,1516407928.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:25:28.801Z,1516407928.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:29.159Z,1516407929.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:29.195Z,1516407929.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:25:29.196Z,1516407929.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:29.561Z,1516407929.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:29.584Z,1516407929.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:25:29.589Z,1516407929.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:29.967Z,1516407929.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:29.998Z,1516407929.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:25:29.999Z,1516407929.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:30.360Z,1516407930.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:30.403Z,1516407930.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:25:30.403Z,1516407930.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:30.757Z,1516407930.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:30.771Z,1516407930.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:25:30.772Z,1516407930.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:31.174Z,1516407931.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:31.200Z,1516407931.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:25:31.201Z,1516407931.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:31.578Z,1516407931.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:31.605Z,1516407931.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:25:31.606Z,1516407931.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:34.687Z,1516407934.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:34.706Z,1516407934.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-01-20T00:25:34.707Z,1516407934.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:34.805Z,1516407934.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:34.850Z,1516407934.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-01-20T00:25:34.851Z,1516407934.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:35.163Z,1516407935.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:35.194Z,1516407935.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:25:35.195Z,1516407935.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:35.563Z,1516407935.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:35.578Z,1516407935.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:25:35.579Z,1516407935.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:35.960Z,1516407935.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:35.975Z,1516407935.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:25:35.976Z,1516407935.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:36.365Z,1516407936.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:36.386Z,1516407936.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:25:36.387Z,1516407936.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:36.764Z,1516407936.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:36.778Z,1516407936.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:25:36.779Z,1516407936.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:37.178Z,1516407937.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:37.211Z,1516407937.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:25:37.211Z,1516407937.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:37.570Z,1516407937.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:37.584Z,1516407937.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:25:37.585Z,1516407937.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:37.982Z,1516407937.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:38.011Z,1516407938.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:25:38.012Z,1516407938.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:38.364Z,1516407938.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:38.382Z,1516407938.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:25:38.383Z,1516407938.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:38.764Z,1516407938.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:38.778Z,1516407938.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:25:38.779Z,1516407938.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:39.165Z,1516407939.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:39.179Z,1516407939.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:25:39.180Z,1516407939.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:39.554Z,1516407939.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:39.573Z,1516407939.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:25:39.574Z,1516407939.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:39.966Z,1516407939.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:39.980Z,1516407939.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:25:39.981Z,1516407939.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:40.370Z,1516407940.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:40.383Z,1516407940.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T00:25:40.384Z,1516407940.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:40.764Z,1516407940.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:40.783Z,1516407940.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:41.161Z,1516407941.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:41.179Z,1516407941.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:41.564Z,1516407941.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:41.578Z,1516407941.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:41.961Z,1516407941.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:41.975Z,1516407941.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:42.365Z,1516407942.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:42.379Z,1516407942.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:42.764Z,1516407942.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:42.778Z,1516407942.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:43.178Z,1516407943.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:43.192Z,1516407943.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:43.574Z,1516407943.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:43.588Z,1516407943.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:43.970Z,1516407943.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:43.990Z,1516407943.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:44.353Z,1516407944.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:44.374Z,1516407944.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:44.763Z,1516407944.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:44.777Z,1516407944.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:45.165Z,1516407945.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:45.182Z,1516407945.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:45.561Z,1516407945.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:45.575Z,1516407945.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:45.967Z,1516407945.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:45.987Z,1516407945.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:46.374Z,1516407946.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:46.387Z,1516407946.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:46.768Z,1516407946.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:46.787Z,1516407946.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:47.162Z,1516407947.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:47.176Z,1516407947.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:47.564Z,1516407947.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:47.577Z,1516407947.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:47.960Z,1516407947.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:47.982Z,1516407947.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:48.368Z,1516407948.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:48.382Z,1516407948.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:48.768Z,1516407948.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:48.782Z,1516407948.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:49.172Z,1516407949.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:49.191Z,1516407949.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:49.572Z,1516407949.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:49.591Z,1516407949.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:49.973Z,1516407949.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:49.987Z,1516407949.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:50.366Z,1516407950.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:50.380Z,1516407950.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:50.758Z,1516407950.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:50.779Z,1516407950.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:51.165Z,1516407951.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:51.182Z,1516407951.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:51.553Z,1516407951.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:51.580Z,1516407951.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:51.977Z,1516407951.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:51.999Z,1516407951.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:52.377Z,1516407952.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:52.391Z,1516407952.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:52.773Z,1516407952.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:52.787Z,1516407952.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:53.158Z,1516407953.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:53.180Z,1516407953.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:53.550Z,1516407953.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:53.576Z,1516407953.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:53.961Z,1516407953.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:53.980Z,1516407953.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:54.368Z,1516407954.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:54.382Z,1516407954.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:54.755Z,1516407954.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:54.781Z,1516407954.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:55.178Z,1516407955.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:55.192Z,1516407955.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:55.580Z,1516407955.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:55.599Z,1516407955.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:55.978Z,1516407955.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:55.992Z,1516407955.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:56.366Z,1516407956.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:56.384Z,1516407956.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:56.755Z,1516407956.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:56.780Z,1516407956.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:57.156Z,1516407957.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:57.190Z,1516407957.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:57.553Z,1516407957.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:57.583Z,1516407957.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:57.978Z,1516407957.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:57.992Z,1516407957.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:58.376Z,1516407958.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:58.401Z,1516407958.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:58.774Z,1516407958.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:58.788Z,1516407958.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:59.155Z,1516407959.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:59.186Z,1516407959.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:59.555Z,1516407959.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:59.586Z,1516407959.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:25:59.949Z,1516407959.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:25:59.975Z,1516407959.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:00.360Z,1516407960.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:00.385Z,1516407960.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:00.755Z,1516407960.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:00.787Z,1516407960.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:01.178Z,1516407961.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:01.192Z,1516407961.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:01.575Z,1516407961.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:01.598Z,1516407961.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:01.979Z,1516407961.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:01.993Z,1516407961.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:02.359Z,1516407962.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:02.390Z,1516407962.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:02.755Z,1516407962.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:02.791Z,1516407962.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:03.160Z,1516407963.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:03.191Z,1516407963.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:03.559Z,1516407963.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:03.590Z,1516407963.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:03.978Z,1516407963.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:03.992Z,1516407963.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:04.380Z,1516407964.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:04.393Z,1516407964.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:04.766Z,1516407964.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:04.799Z,1516407964.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:05.163Z,1516407965.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:05.188Z,1516407965.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:05.556Z,1516407965.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:05.594Z,1516407965.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:05.954Z,1516407965.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:05.968Z,1516407965.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:06.361Z,1516407966.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:06.375Z,1516407966.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:06.757Z,1516407966.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:06.771Z,1516407966.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:07.171Z,1516407967.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:07.200Z,1516407967.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:07.575Z,1516407967.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:07.596Z,1516407967.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:07.993Z,1516407967.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:08.007Z,1516407968.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:08.363Z,1516407968.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:08.403Z,1516407968.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:08.763Z,1516407968.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:08.799Z,1516407968.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:09.164Z,1516407969.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:09.178Z,1516407969.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:09.552Z,1516407969.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:09.583Z,1516407969.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:09.978Z,1516407969.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:10.007Z,1516407970.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:10.378Z,1516407970.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:10.409Z,1516407970.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:10.767Z,1516407970.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:10.781Z,1516407970.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:11.165Z,1516407971.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:11.180Z,1516407971.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:11.565Z,1516407971.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:11.579Z,1516407971.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:11.960Z,1516407971.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:11.986Z,1516407971.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:12.367Z,1516407972.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:12.387Z,1516407972.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:12.769Z,1516407972.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:12.783Z,1516407972.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:13.171Z,1516407973.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:13.185Z,1516407973.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:13.571Z,1516407973.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:13.586Z,1516407973.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:13.972Z,1516407973.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:13.986Z,1516407973.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:14.368Z,1516407974.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:14.382Z,1516407974.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:14.763Z,1516407974.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:14.778Z,1516407974.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:15.168Z,1516407975.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:15.182Z,1516407975.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:15.554Z,1516407975.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:15.574Z,1516407975.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:15.968Z,1516407975.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:15.988Z,1516407975.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:16.374Z,1516407976.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:16.388Z,1516407976.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:16.769Z,1516407976.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:16.783Z,1516407976.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:17.167Z,1516407977.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:17.181Z,1516407977.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:17.567Z,1516407977.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:17.581Z,1516407977.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:17.961Z,1516407977.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:17.975Z,1516407977.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:18.359Z,1516407978.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:18.382Z,1516407978.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:18.767Z,1516407978.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:18.781Z,1516407978.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:19.172Z,1516407979.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:19.191Z,1516407979.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:19.574Z,1516407979.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:19.588Z,1516407979.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:19.973Z,1516407979.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:19.987Z,1516407979.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:20.367Z,1516407980.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:20.387Z,1516407980.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:20.767Z,1516407980.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:20.787Z,1516407980.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:21.169Z,1516407981.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:21.182Z,1516407981.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:21.561Z,1516407981.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:21.575Z,1516407981.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:21.972Z,1516407981.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:21.991Z,1516407981.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:22.374Z,1516407982.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:22.387Z,1516407982.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:22.773Z,1516407982.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:22.787Z,1516407982.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:23.167Z,1516407983.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:23.187Z,1516407983.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:23.568Z,1516407983.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:23.581Z,1516407983.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:23.961Z,1516407983.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:23.975Z,1516407983.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:24.359Z,1516407984.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:24.382Z,1516407984.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:24.767Z,1516407984.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:24.781Z,1516407984.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:25.177Z,1516407985.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:25.191Z,1516407985.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:25.576Z,1516407985.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:25.595Z,1516407985.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:25.978Z,1516407985.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:25.991Z,1516407985.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:26.368Z,1516407986.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:26.382Z,1516407986.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:26.758Z,1516407986.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:26.780Z,1516407986.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:27.165Z,1516407987.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:27.178Z,1516407987.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:27.561Z,1516407987.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:27.578Z,1516407987.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:27.973Z,1516407987.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:27.988Z,1516407987.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:28.377Z,1516407988.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:28.398Z,1516407988.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:28.766Z,1516407988.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:28.793Z,1516407988.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:29.166Z,1516407989.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:29.184Z,1516407989.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:29.555Z,1516407989.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:29.583Z,1516407989.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:29.949Z,1516407989.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:29.982Z,1516407989.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:30.368Z,1516407990.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:30.382Z,1516407990.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:30.755Z,1516407990.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:30.783Z,1516407990.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:31.178Z,1516407991.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:31.192Z,1516407991.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:31.577Z,1516407991.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:31.591Z,1516407991.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:31.976Z,1516407991.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:31.990Z,1516407991.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:35.078Z,1516407995.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:35.092Z,1516407995.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:35.195Z,1516407995.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:35.234Z,1516407995.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:35.564Z,1516407995.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:35.578Z,1516407995.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:35.967Z,1516407995.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:35.986Z,1516407995.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:36.364Z,1516407996.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:36.378Z,1516407996.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:36.747Z,1516407996.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:36.776Z,1516407996.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:37.145Z,1516407997.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:37.171Z,1516407997.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:37.535Z,1516407997.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:37.558Z,1516407997.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:37.958Z,1516407997.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:37.986Z,1516407997.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:38.349Z,1516407998.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:38.363Z,1516407998.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:38.750Z,1516407998.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:38.764Z,1516407998.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:39.144Z,1516407999.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:39.163Z,1516407999.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:39.549Z,1516407999.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:39.563Z,1516407999.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:39.938Z,1516407999.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:39.965Z,1516407999.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:40.346Z,1516408000.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:40.364Z,1516408000.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:40.745Z,1516408000.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:40.769Z,1516408000.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:41.150Z,1516408001.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:41.164Z,1516408001.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:41.562Z,1516408001.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:41.592Z,1516408001.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:41.950Z,1516408001.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:41.964Z,1516408001.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:42.345Z,1516408002.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:42.359Z,1516408002.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:42.749Z,1516408002.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:42.763Z,1516408002.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:43.150Z,1516408003.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:43.163Z,1516408003.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:43.544Z,1516408003.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:43.595Z,1516408003.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:43.962Z,1516408003.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:43.977Z,1516408003.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:44.360Z,1516408004.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:44.374Z,1516408004.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:44.756Z,1516408004.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:44.782Z,1516408004.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:45.140Z,1516408005.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:45.174Z,1516408005.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:45.554Z,1516408005.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:45.576Z,1516408005.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:45.937Z,1516408005.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:45.968Z,1516408005.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:46.344Z,1516408006.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:46.372Z,1516408006.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:46.735Z,1516408006.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:46.769Z,1516408006.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:47.163Z,1516408007.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:47.183Z,1516408007.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:47.522Z,1516408007.522 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T00:26:47.522Z,1516408007.522 [NAL9602] Data Fault, FailCount= 3
2018-01-20T00:26:47.522Z,1516408007.522 [NAL9602](ERROR): Data Fault
2018-01-20T00:26:47.540Z,1516408007.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:47.572Z,1516408007.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:47.601Z,1516408007.601 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T00:26:47.918Z,1516408007.918 [NAL9602](INFO): Powering down
2018-01-20T00:26:47.936Z,1516408007.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:47.978Z,1516408007.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:48.343Z,1516408008.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:48.368Z,1516408008.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:48.739Z,1516408008.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:48.771Z,1516408008.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:48.785Z,1516408008.785 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T00:26:48.785Z,1516408008.785 [NAL9602] No Fault, FailCount= 3
2018-01-20T00:26:49.140Z,1516408009.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:49.171Z,1516408009.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:49.537Z,1516408009.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:49.559Z,1516408009.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:49.944Z,1516408009.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:49.974Z,1516408009.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:50.340Z,1516408010.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:50.366Z,1516408010.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:50.748Z,1516408010.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:50.762Z,1516408010.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:51.142Z,1516408011.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:51.167Z,1516408011.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:51.542Z,1516408011.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:51.557Z,1516408011.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:51.943Z,1516408011.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:51.963Z,1516408011.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:52.342Z,1516408012.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:52.375Z,1516408012.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:52.751Z,1516408012.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:52.765Z,1516408012.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:53.151Z,1516408013.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:53.166Z,1516408013.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:53.547Z,1516408013.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:53.560Z,1516408013.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:53.951Z,1516408013.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:53.965Z,1516408013.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:54.351Z,1516408014.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:54.365Z,1516408014.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:54.747Z,1516408014.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:54.766Z,1516408014.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:55.151Z,1516408015.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:55.164Z,1516408015.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:55.544Z,1516408015.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:55.558Z,1516408015.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:55.943Z,1516408015.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:55.962Z,1516408015.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:56.351Z,1516408016.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:56.365Z,1516408016.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:56.745Z,1516408016.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:56.759Z,1516408016.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:57.147Z,1516408017.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:57.166Z,1516408017.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:57.551Z,1516408017.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:57.564Z,1516408017.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:57.932Z,1516408017.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:57.966Z,1516408017.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:58.350Z,1516408018.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:58.364Z,1516408018.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:58.747Z,1516408018.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:58.766Z,1516408018.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:59.151Z,1516408019.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:59.165Z,1516408019.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:59.547Z,1516408019.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:59.566Z,1516408019.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:26:59.951Z,1516408019.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:26:59.965Z,1516408019.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:00.351Z,1516408020.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:00.365Z,1516408020.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:00.746Z,1516408020.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:00.760Z,1516408020.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:01.151Z,1516408021.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:01.164Z,1516408021.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:01.547Z,1516408021.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:01.561Z,1516408021.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:01.955Z,1516408021.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:01.969Z,1516408021.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:02.351Z,1516408022.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:02.364Z,1516408022.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:02.736Z,1516408022.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:02.770Z,1516408022.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:03.151Z,1516408023.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:03.165Z,1516408023.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:03.551Z,1516408023.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:03.565Z,1516408023.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:03.936Z,1516408023.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:03.967Z,1516408023.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:04.351Z,1516408024.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:04.364Z,1516408024.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:04.752Z,1516408024.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:04.766Z,1516408024.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:05.151Z,1516408025.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:05.165Z,1516408025.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:05.539Z,1516408025.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:05.563Z,1516408025.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:05.952Z,1516408025.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:05.979Z,1516408025.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:06.353Z,1516408026.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:06.367Z,1516408026.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:06.740Z,1516408026.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:06.765Z,1516408026.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:07.151Z,1516408027.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:07.165Z,1516408027.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:07.536Z,1516408027.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:07.561Z,1516408027.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:07.946Z,1516408027.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:07.959Z,1516408027.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:08.342Z,1516408028.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:08.372Z,1516408028.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:08.736Z,1516408028.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:08.762Z,1516408028.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:09.147Z,1516408029.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:09.160Z,1516408029.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:09.554Z,1516408029.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:09.568Z,1516408029.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:09.947Z,1516408029.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:09.962Z,1516408029.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:10.346Z,1516408030.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:10.360Z,1516408030.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:10.742Z,1516408030.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:10.772Z,1516408030.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:11.153Z,1516408031.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:11.168Z,1516408031.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:11.549Z,1516408031.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:11.563Z,1516408031.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:11.951Z,1516408031.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:11.980Z,1516408031.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:12.348Z,1516408032.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:12.363Z,1516408032.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:12.736Z,1516408032.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:12.768Z,1516408032.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:13.154Z,1516408033.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:13.168Z,1516408033.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:13.545Z,1516408033.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:13.562Z,1516408033.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:13.955Z,1516408033.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:13.969Z,1516408033.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:14.350Z,1516408034.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:14.364Z,1516408034.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:14.745Z,1516408034.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:14.763Z,1516408034.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:15.146Z,1516408035.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:15.160Z,1516408035.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:15.550Z,1516408035.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:15.565Z,1516408035.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:15.935Z,1516408035.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:15.973Z,1516408035.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:16.353Z,1516408036.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:16.367Z,1516408036.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:16.752Z,1516408036.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:16.767Z,1516408036.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:17.147Z,1516408037.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:17.161Z,1516408037.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:17.535Z,1516408037.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:17.566Z,1516408037.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:17.926Z,1516408037.926 [NAL9602](INFO): Powering up NAL9602
2018-01-20T00:27:17.959Z,1516408037.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:17.966Z,1516408037.966 [PNI_TCM](ERROR): CRC does not match. Expected:0x30160 got:0x46361
2018-01-20T00:27:18.007Z,1516408038.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:18.345Z,1516408038.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:18.368Z,1516408038.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:18.750Z,1516408038.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:18.764Z,1516408038.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:19.154Z,1516408039.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:19.169Z,1516408039.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:19.536Z,1516408039.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:19.568Z,1516408039.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:19.954Z,1516408039.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:19.968Z,1516408039.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:20.343Z,1516408040.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:20.369Z,1516408040.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:20.735Z,1516408040.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:20.770Z,1516408040.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:21.155Z,1516408041.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:21.169Z,1516408041.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:21.556Z,1516408041.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:21.570Z,1516408041.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:21.941Z,1516408041.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:21.967Z,1516408041.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:22.339Z,1516408042.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:22.374Z,1516408042.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:22.739Z,1516408042.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:22.763Z,1516408042.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:23.143Z,1516408043.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:23.169Z,1516408043.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:23.542Z,1516408043.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:23.567Z,1516408043.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:23.937Z,1516408043.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:23.978Z,1516408043.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:24.346Z,1516408044.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:24.375Z,1516408044.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:24.737Z,1516408044.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:24.771Z,1516408044.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:25.145Z,1516408045.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:25.172Z,1516408045.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:25.535Z,1516408045.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:25.573Z,1516408045.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:25.938Z,1516408045.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:25.973Z,1516408045.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:26.345Z,1516408046.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:26.372Z,1516408046.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:26.737Z,1516408046.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:26.764Z,1516408046.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:27.143Z,1516408047.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:27.175Z,1516408047.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:27.533Z,1516408047.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:27.548Z,1516408047.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:27.936Z,1516408047.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:27.954Z,1516408047.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:28.346Z,1516408048.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:28.360Z,1516408048.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:28.747Z,1516408048.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:28.783Z,1516408048.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:29.130Z,1516408049.130 [NAL9602](INFO): NAL9602 initialized
2018-01-20T00:27:29.149Z,1516408049.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:29.182Z,1516408049.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:29.550Z,1516408049.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:29.564Z,1516408049.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:29.963Z,1516408049.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:29.994Z,1516408049.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:30.347Z,1516408050.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:30.385Z,1516408050.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:30.744Z,1516408050.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:30.763Z,1516408050.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:31.151Z,1516408051.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:31.166Z,1516408051.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:31.552Z,1516408051.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:31.567Z,1516408051.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:31.948Z,1516408051.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:31.994Z,1516408051.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:32.350Z,1516408052.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:32.369Z,1516408052.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:35.446Z,1516408055.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:35.461Z,1516408055.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:35.586Z,1516408055.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:35.601Z,1516408055.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:35.923Z,1516408055.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:35.963Z,1516408055.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:36.342Z,1516408056.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:36.358Z,1516408056.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:36.728Z,1516408056.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:36.772Z,1516408056.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:37.125Z,1516408057.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:37.150Z,1516408057.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:37.540Z,1516408057.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:37.556Z,1516408057.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:37.940Z,1516408057.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:37.962Z,1516408057.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:38.346Z,1516408058.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:38.390Z,1516408058.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:38.719Z,1516408058.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:38.751Z,1516408058.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:39.127Z,1516408059.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:39.152Z,1516408059.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:39.523Z,1516408059.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:39.552Z,1516408059.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:39.928Z,1516408059.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:39.954Z,1516408059.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:40.327Z,1516408060.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:40.352Z,1516408060.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:40.742Z,1516408060.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:40.758Z,1516408060.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:41.142Z,1516408061.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:41.162Z,1516408061.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:41.542Z,1516408061.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:41.556Z,1516408061.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:41.923Z,1516408061.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:41.948Z,1516408061.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:42.323Z,1516408062.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:42.366Z,1516408062.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:42.722Z,1516408062.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:42.747Z,1516408062.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:43.123Z,1516408063.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:43.148Z,1516408063.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:43.541Z,1516408063.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:43.563Z,1516408063.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:43.940Z,1516408063.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:43.958Z,1516408063.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:44.342Z,1516408064.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:44.360Z,1516408064.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:44.723Z,1516408064.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:44.750Z,1516408064.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:45.119Z,1516408065.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:45.150Z,1516408065.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:45.523Z,1516408065.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:45.548Z,1516408065.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:45.924Z,1516408065.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:45.958Z,1516408065.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:46.327Z,1516408066.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:46.352Z,1516408066.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:46.742Z,1516408066.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:46.756Z,1516408066.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:47.147Z,1516408067.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:47.161Z,1516408067.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:47.541Z,1516408067.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:47.567Z,1516408067.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:47.927Z,1516408067.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:47.952Z,1516408067.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:48.323Z,1516408068.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:48.350Z,1516408068.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:48.720Z,1516408068.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:48.751Z,1516408068.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:49.123Z,1516408069.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:49.154Z,1516408069.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:49.546Z,1516408069.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:49.560Z,1516408069.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:49.942Z,1516408069.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:49.959Z,1516408069.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:50.342Z,1516408070.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:50.356Z,1516408070.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:50.724Z,1516408070.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:50.759Z,1516408070.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:51.127Z,1516408071.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:51.158Z,1516408071.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:51.524Z,1516408071.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:51.550Z,1516408071.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:51.927Z,1516408071.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:51.963Z,1516408071.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:52.338Z,1516408072.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:52.363Z,1516408072.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:52.755Z,1516408072.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:52.769Z,1516408072.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:53.142Z,1516408073.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:53.175Z,1516408073.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:53.523Z,1516408073.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:53.543Z,1516408073.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:53.931Z,1516408073.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:53.974Z,1516408073.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:54.331Z,1516408074.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:54.367Z,1516408074.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:54.732Z,1516408074.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:54.747Z,1516408074.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:55.130Z,1516408075.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:55.144Z,1516408075.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:55.546Z,1516408075.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:55.579Z,1516408075.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:55.946Z,1516408075.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:55.960Z,1516408075.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:56.338Z,1516408076.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:56.352Z,1516408076.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:56.731Z,1516408076.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:56.746Z,1516408076.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:57.131Z,1516408077.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:57.145Z,1516408077.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:57.527Z,1516408077.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:57.554Z,1516408077.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:57.937Z,1516408077.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:57.951Z,1516408077.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:58.337Z,1516408078.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:58.352Z,1516408078.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:58.741Z,1516408078.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:58.755Z,1516408078.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:59.142Z,1516408079.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:59.163Z,1516408079.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:59.533Z,1516408079.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:59.547Z,1516408079.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:27:59.937Z,1516408079.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:27:59.952Z,1516408079.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:00.332Z,1516408080.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:00.353Z,1516408080.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:00.729Z,1516408080.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:00.756Z,1516408080.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:01.130Z,1516408081.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:01.151Z,1516408081.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:01.541Z,1516408081.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:01.556Z,1516408081.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:01.943Z,1516408081.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:01.958Z,1516408081.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:02.346Z,1516408082.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:02.360Z,1516408082.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:02.736Z,1516408082.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:02.752Z,1516408082.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:03.119Z,1516408083.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:03.152Z,1516408083.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:03.536Z,1516408083.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:03.552Z,1516408083.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:03.919Z,1516408083.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:03.956Z,1516408083.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:04.347Z,1516408084.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:04.362Z,1516408084.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:04.745Z,1516408084.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:04.773Z,1516408084.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:05.148Z,1516408085.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:05.163Z,1516408085.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:05.524Z,1516408085.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:05.554Z,1516408085.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:05.928Z,1516408085.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:05.955Z,1516408085.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:06.324Z,1516408086.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:06.338Z,1516408086.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:06.733Z,1516408086.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:06.747Z,1516408086.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:07.132Z,1516408087.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:07.146Z,1516408087.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:07.543Z,1516408087.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:07.577Z,1516408087.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:07.935Z,1516408087.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:07.950Z,1516408087.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:08.335Z,1516408088.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:08.349Z,1516408088.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:08.728Z,1516408088.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:08.742Z,1516408088.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:09.132Z,1516408089.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:09.148Z,1516408089.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:09.533Z,1516408089.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:09.552Z,1516408089.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:09.935Z,1516408089.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:09.950Z,1516408089.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:10.337Z,1516408090.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:10.351Z,1516408090.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:10.742Z,1516408090.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:10.779Z,1516408090.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:11.137Z,1516408091.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:11.151Z,1516408091.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:11.527Z,1516408091.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:11.541Z,1516408091.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:11.931Z,1516408091.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:11.953Z,1516408091.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:12.337Z,1516408092.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:12.351Z,1516408092.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:12.727Z,1516408092.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:12.741Z,1516408092.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:13.135Z,1516408093.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:13.151Z,1516408093.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:13.542Z,1516408093.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:13.556Z,1516408093.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:13.938Z,1516408093.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:13.953Z,1516408093.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:14.331Z,1516408094.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:14.345Z,1516408094.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:14.735Z,1516408094.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:14.749Z,1516408094.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:15.135Z,1516408095.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:15.150Z,1516408095.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:15.532Z,1516408095.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:15.546Z,1516408095.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:15.935Z,1516408095.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:15.950Z,1516408095.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:16.338Z,1516408096.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:16.353Z,1516408096.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:16.742Z,1516408096.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:16.779Z,1516408096.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:17.137Z,1516408097.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:17.158Z,1516408097.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:17.535Z,1516408097.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:17.550Z,1516408097.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:17.931Z,1516408097.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:17.945Z,1516408097.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:18.332Z,1516408098.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:18.346Z,1516408098.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:18.735Z,1516408098.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:18.751Z,1516408098.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:19.134Z,1516408099.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:19.148Z,1516408099.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:19.538Z,1516408099.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:19.552Z,1516408099.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:19.942Z,1516408099.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:19.963Z,1516408099.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:20.340Z,1516408100.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:20.359Z,1516408100.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:20.736Z,1516408100.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:20.750Z,1516408100.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:21.135Z,1516408101.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:21.151Z,1516408101.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:21.536Z,1516408101.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:21.550Z,1516408101.550 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:21.550Z,1516408101.550 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-01-20T00:28:21.551Z,1516408101.551 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:28:21.552Z,1516408101.552 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:21.552Z,1516408101.552 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-01-20T00:28:21.552Z,1516408101.552 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:28:21.554Z,1516408101.554 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:21.554Z,1516408101.554 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 66
2018-01-20T00:28:21.554Z,1516408101.554 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:28:21.582Z,1516408101.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:28:21.582Z,1516408101.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:28:21.583Z,1516408101.583 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:28:21.932Z,1516408101.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:21.961Z,1516408101.961 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:28:21.961Z,1516408101.961 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-01-20T00:28:21.962Z,1516408101.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:28:21.962Z,1516408101.962 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-01-20T00:28:21.962Z,1516408101.962 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:28:21.962Z,1516408101.962 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 66
2018-01-20T00:28:22.345Z,1516408102.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:22.358Z,1516408102.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:28:22.359Z,1516408102.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:28:22.359Z,1516408102.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:28:22.359Z,1516408102.359 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:28:22.360Z,1516408102.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:28:22.360Z,1516408102.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:28:22.361Z,1516408102.361 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:28:22.361Z,1516408102.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:28:22.362Z,1516408102.362 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:28:22.746Z,1516408102.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:22.766Z,1516408102.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:28:22.767Z,1516408102.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:23.147Z,1516408103.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:23.160Z,1516408103.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:28:23.161Z,1516408103.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:23.534Z,1516408103.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:23.548Z,1516408103.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:28:23.549Z,1516408103.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:23.923Z,1516408103.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:23.954Z,1516408103.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:28:23.955Z,1516408103.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:24.319Z,1516408104.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:24.350Z,1516408104.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:28:24.351Z,1516408104.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:24.724Z,1516408104.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:24.754Z,1516408104.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:28:24.755Z,1516408104.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:25.123Z,1516408105.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:25.154Z,1516408105.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:28:25.155Z,1516408105.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:25.537Z,1516408105.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:25.560Z,1516408105.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:28:25.561Z,1516408105.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:25.947Z,1516408105.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:25.966Z,1516408105.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:28:25.967Z,1516408105.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:26.342Z,1516408106.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:26.356Z,1516408106.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:28:26.357Z,1516408106.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:26.719Z,1516408106.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:26.753Z,1516408106.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:28:26.754Z,1516408106.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:27.134Z,1516408107.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:27.152Z,1516408107.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:28:27.153Z,1516408107.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:27.540Z,1516408107.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:27.554Z,1516408107.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:28:27.555Z,1516408107.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:27.919Z,1516408107.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:27.951Z,1516408107.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:28:27.952Z,1516408107.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:28.345Z,1516408108.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:28.366Z,1516408108.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:28:28.367Z,1516408108.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:28.748Z,1516408108.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:28.766Z,1516408108.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:28:28.767Z,1516408108.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:29.147Z,1516408109.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:29.160Z,1516408109.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:28:29.161Z,1516408109.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:29.536Z,1516408109.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:29.551Z,1516408109.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:28:29.552Z,1516408109.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:29.923Z,1516408109.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:29.965Z,1516408109.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:28:29.966Z,1516408109.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:30.327Z,1516408110.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:30.353Z,1516408110.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:28:30.354Z,1516408110.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:30.728Z,1516408110.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:30.753Z,1516408110.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:28:30.754Z,1516408110.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:31.123Z,1516408111.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:31.154Z,1516408111.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:28:31.155Z,1516408111.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:31.158Z,1516408111.158 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T00:28:31.158Z,1516408111.158 [Default:CheckIn:C.Wait] Stopped
2018-01-20T00:28:31.158Z,1516408111.158 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T00:28:31.158Z,1516408111.158 [Default:CheckIn:D] Running Loop=1
2018-01-20T00:28:31.530Z,1516408111.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:31.563Z,1516408111.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:28:31.564Z,1516408111.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:31.567Z,1516408111.567 [Default:CheckIn:D] Stopped
2018-01-20T00:28:31.567Z,1516408111.567 [Default:CheckIn:E] Running Loop=1
2018-01-20T00:28:31.950Z,1516408111.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:31.964Z,1516408111.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:28:31.965Z,1516408111.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:31.968Z,1516408111.968 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 195.725700 min 
2018-01-20T00:28:31.968Z,1516408111.968 [Default:CheckIn:E] Stopped
2018-01-20T00:28:31.968Z,1516408111.968 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T00:28:31.969Z,1516408111.969 [Default:CheckIn] Stopped
2018-01-20T00:28:31.969Z,1516408111.969 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T00:28:31.969Z,1516408111.969 [Default:CheckIn](INFO): Running loop #20
2018-01-20T00:28:31.969Z,1516408111.969 [Default:CheckIn] Running Loop=20
2018-01-20T00:28:31.969Z,1516408111.969 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T00:28:31.969Z,1516408111.969 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T00:28:32.354Z,1516408112.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:32.368Z,1516408112.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:28:32.368Z,1516408112.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:32.720Z,1516408112.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:32.762Z,1516408112.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:28:32.763Z,1516408112.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:35.818Z,1516408115.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:35.832Z,1516408115.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-01-20T00:28:35.833Z,1516408115.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:35.927Z,1516408115.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:35.967Z,1516408115.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:28:35.968Z,1516408115.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:36.317Z,1516408116.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:36.331Z,1516408116.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:28:36.332Z,1516408116.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:36.730Z,1516408116.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:36.760Z,1516408116.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:28:36.765Z,1516408116.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:37.118Z,1516408117.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:37.132Z,1516408117.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:28:37.133Z,1516408117.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:37.516Z,1516408117.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:37.530Z,1516408117.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:28:37.531Z,1516408117.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:37.915Z,1516408117.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:37.928Z,1516408117.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:28:37.930Z,1516408117.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:38.308Z,1516408118.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:38.327Z,1516408118.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:28:38.328Z,1516408118.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:38.711Z,1516408118.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:38.729Z,1516408118.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:28:38.730Z,1516408118.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:39.120Z,1516408119.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:39.134Z,1516408119.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:28:39.135Z,1516408119.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:39.523Z,1516408119.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:39.537Z,1516408119.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:28:39.538Z,1516408119.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:39.920Z,1516408119.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:39.933Z,1516408119.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:28:39.934Z,1516408119.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:40.308Z,1516408120.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:40.323Z,1516408120.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:28:40.324Z,1516408120.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:40.702Z,1516408120.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:40.726Z,1516408120.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:28:40.726Z,1516408120.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:41.115Z,1516408121.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:41.131Z,1516408121.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:28:41.132Z,1516408121.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:41.513Z,1516408121.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:41.527Z,1516408121.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T00:28:41.528Z,1516408121.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:41.900Z,1516408121.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:41.930Z,1516408121.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:42.326Z,1516408122.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:42.343Z,1516408122.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:42.731Z,1516408122.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:42.746Z,1516408122.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:43.127Z,1516408123.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:43.141Z,1516408123.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:43.504Z,1516408123.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:43.529Z,1516408123.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:43.899Z,1516408123.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:43.935Z,1516408123.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:44.300Z,1516408124.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:44.331Z,1516408124.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:44.707Z,1516408124.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:44.739Z,1516408124.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:45.124Z,1516408125.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:45.138Z,1516408125.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:45.531Z,1516408125.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:45.551Z,1516408125.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:45.927Z,1516408125.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:45.941Z,1516408125.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:46.299Z,1516408126.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:46.336Z,1516408126.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:46.701Z,1516408126.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:46.727Z,1516408126.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:47.107Z,1516408127.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:47.139Z,1516408127.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:47.500Z,1516408127.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:47.543Z,1516408127.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:47.907Z,1516408127.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:47.938Z,1516408127.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:48.326Z,1516408128.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:48.340Z,1516408128.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:48.714Z,1516408128.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:48.740Z,1516408128.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:49.126Z,1516408129.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:49.140Z,1516408129.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:49.503Z,1516408129.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:49.538Z,1516408129.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:49.907Z,1516408129.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:49.940Z,1516408129.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:50.308Z,1516408130.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:50.338Z,1516408130.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:50.703Z,1516408130.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:50.738Z,1516408130.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:51.114Z,1516408131.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:51.151Z,1516408131.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:51.530Z,1516408131.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:51.544Z,1516408131.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:51.914Z,1516408131.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:51.948Z,1516408131.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:52.307Z,1516408132.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:52.340Z,1516408132.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:52.701Z,1516408132.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:52.715Z,1516408132.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:53.107Z,1516408133.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:53.142Z,1516408133.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:53.508Z,1516408133.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:53.546Z,1516408133.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:53.907Z,1516408133.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:53.943Z,1516408133.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:54.314Z,1516408134.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:54.339Z,1516408134.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:54.714Z,1516408134.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:54.747Z,1516408134.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:55.118Z,1516408135.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:55.143Z,1516408135.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:55.503Z,1516408135.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:55.539Z,1516408135.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:55.908Z,1516408135.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:55.922Z,1516408135.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:56.312Z,1516408136.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:56.326Z,1516408136.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:56.711Z,1516408136.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:56.731Z,1516408136.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:57.126Z,1516408137.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:57.158Z,1516408137.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:57.522Z,1516408137.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:57.536Z,1516408137.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:57.926Z,1516408137.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:57.940Z,1516408137.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:58.315Z,1516408138.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:58.329Z,1516408138.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:58.715Z,1516408138.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:58.729Z,1516408138.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:59.111Z,1516408139.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:59.125Z,1516408139.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:59.516Z,1516408139.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:59.529Z,1516408139.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:28:59.915Z,1516408139.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:28:59.929Z,1516408139.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:00.316Z,1516408140.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:00.335Z,1516408140.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:00.722Z,1516408140.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:00.736Z,1516408140.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:01.118Z,1516408141.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:01.132Z,1516408141.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:01.515Z,1516408141.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:01.529Z,1516408141.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:01.912Z,1516408141.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:01.926Z,1516408141.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:02.315Z,1516408142.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:02.335Z,1516408142.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:02.714Z,1516408142.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:02.728Z,1516408142.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:03.117Z,1516408143.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:03.131Z,1516408143.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:03.522Z,1516408143.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:03.536Z,1516408143.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:03.918Z,1516408143.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:03.932Z,1516408143.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:04.316Z,1516408144.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:04.329Z,1516408144.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:04.715Z,1516408144.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:04.729Z,1516408144.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:05.118Z,1516408145.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:05.132Z,1516408145.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:05.522Z,1516408145.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:05.535Z,1516408145.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:05.918Z,1516408145.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:05.932Z,1516408145.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:06.315Z,1516408146.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:06.329Z,1516408146.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:06.709Z,1516408146.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:06.723Z,1516408146.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:07.115Z,1516408147.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:07.129Z,1516408147.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:07.518Z,1516408147.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:07.532Z,1516408147.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:07.917Z,1516408147.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:07.938Z,1516408147.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:08.318Z,1516408148.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:08.332Z,1516408148.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:08.711Z,1516408148.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:08.725Z,1516408148.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:09.115Z,1516408149.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:09.129Z,1516408149.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:09.515Z,1516408149.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:09.535Z,1516408149.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:09.914Z,1516408149.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:09.928Z,1516408149.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:10.317Z,1516408150.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:10.339Z,1516408150.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:10.722Z,1516408150.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:10.736Z,1516408150.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:11.118Z,1516408151.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:11.132Z,1516408151.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:11.515Z,1516408151.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:11.529Z,1516408151.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:11.915Z,1516408151.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:11.929Z,1516408151.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:12.315Z,1516408152.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:12.330Z,1516408152.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:12.713Z,1516408152.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:12.727Z,1516408152.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:13.116Z,1516408153.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:13.130Z,1516408153.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:13.522Z,1516408153.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:13.536Z,1516408153.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:13.921Z,1516408153.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:13.935Z,1516408153.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:14.322Z,1516408154.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:14.336Z,1516408154.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:14.716Z,1516408154.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:14.730Z,1516408154.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:14.743Z,1516408154.743 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T00:29:15.114Z,1516408155.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:15.127Z,1516408155.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:15.518Z,1516408155.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:15.532Z,1516408155.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:15.912Z,1516408155.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:15.927Z,1516408155.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:16.322Z,1516408156.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:16.336Z,1516408156.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:16.718Z,1516408156.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:16.741Z,1516408156.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:17.127Z,1516408157.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:17.147Z,1516408157.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:17.518Z,1516408157.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:17.532Z,1516408157.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:17.909Z,1516408157.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:17.935Z,1516408157.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:18.316Z,1516408158.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:18.339Z,1516408158.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:18.700Z,1516408158.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:18.733Z,1516408158.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:19.101Z,1516408159.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:19.128Z,1516408159.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:19.526Z,1516408159.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:19.547Z,1516408159.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:19.931Z,1516408159.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:19.946Z,1516408159.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:20.326Z,1516408160.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:20.343Z,1516408160.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:20.718Z,1516408160.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:20.737Z,1516408160.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:21.104Z,1516408161.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:21.136Z,1516408161.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:21.519Z,1516408161.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:21.533Z,1516408161.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:21.904Z,1516408161.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:21.930Z,1516408161.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:22.322Z,1516408162.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:22.348Z,1516408162.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:22.715Z,1516408162.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:22.749Z,1516408162.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:23.119Z,1516408163.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:23.144Z,1516408163.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:23.499Z,1516408163.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:23.519Z,1516408163.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:23.901Z,1516408163.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:23.915Z,1516408163.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:24.311Z,1516408164.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:24.344Z,1516408164.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:24.705Z,1516408164.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:24.718Z,1516408164.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:25.101Z,1516408165.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:25.115Z,1516408165.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:25.522Z,1516408165.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:25.546Z,1516408165.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:25.926Z,1516408165.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:25.951Z,1516408165.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:26.318Z,1516408166.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:26.348Z,1516408166.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:26.711Z,1516408166.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:26.731Z,1516408166.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:27.108Z,1516408167.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:27.122Z,1516408167.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:27.505Z,1516408167.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:27.523Z,1516408167.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:27.910Z,1516408167.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:27.931Z,1516408167.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:28.314Z,1516408168.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:28.328Z,1516408168.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:28.710Z,1516408168.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:28.724Z,1516408168.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:29.126Z,1516408169.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:29.156Z,1516408169.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:29.512Z,1516408169.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:29.526Z,1516408169.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:29.900Z,1516408169.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:29.926Z,1516408169.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:30.312Z,1516408170.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:30.326Z,1516408170.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:30.713Z,1516408170.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:30.727Z,1516408170.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:31.107Z,1516408171.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:31.121Z,1516408171.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:31.526Z,1516408171.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:31.556Z,1516408171.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:31.922Z,1516408171.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:31.935Z,1516408171.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:32.326Z,1516408172.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:32.355Z,1516408172.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:32.712Z,1516408172.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:32.731Z,1516408172.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:33.113Z,1516408173.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:33.127Z,1516408173.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:36.206Z,1516408176.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:36.220Z,1516408176.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:36.316Z,1516408176.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:36.358Z,1516408176.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:36.682Z,1516408176.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:36.707Z,1516408176.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:37.100Z,1516408177.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:37.113Z,1516408177.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:37.482Z,1516408177.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:37.507Z,1516408177.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:37.875Z,1516408177.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:37.910Z,1516408177.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:38.271Z,1516408178.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:38.285Z,1516408178.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:38.677Z,1516408178.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:38.711Z,1516408178.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:39.075Z,1516408179.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:39.095Z,1516408179.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:39.478Z,1516408179.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:39.492Z,1516408179.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:39.886Z,1516408179.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:39.916Z,1516408179.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:40.282Z,1516408180.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:40.296Z,1516408180.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:40.676Z,1516408180.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:40.690Z,1516408180.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:41.072Z,1516408181.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:41.087Z,1516408181.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:41.477Z,1516408181.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:41.499Z,1516408181.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:41.876Z,1516408181.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:41.890Z,1516408181.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:42.290Z,1516408182.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:42.304Z,1516408182.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:42.686Z,1516408182.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:42.700Z,1516408182.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:43.082Z,1516408183.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:43.102Z,1516408183.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:43.477Z,1516408183.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:43.491Z,1516408183.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:43.874Z,1516408183.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:43.895Z,1516408183.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:44.280Z,1516408184.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:44.294Z,1516408184.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:44.679Z,1516408184.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:44.699Z,1516408184.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:45.075Z,1516408185.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:45.095Z,1516408185.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:45.482Z,1516408185.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:45.496Z,1516408185.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:45.886Z,1516408185.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:45.900Z,1516408185.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:46.282Z,1516408186.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:46.296Z,1516408186.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:46.680Z,1516408186.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:46.694Z,1516408186.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:47.080Z,1516408187.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:47.094Z,1516408187.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:47.474Z,1516408187.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:47.493Z,1516408187.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:47.880Z,1516408187.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:47.894Z,1516408187.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:48.282Z,1516408188.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:48.296Z,1516408188.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:48.686Z,1516408188.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:48.700Z,1516408188.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:49.082Z,1516408189.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:49.096Z,1516408189.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:49.472Z,1516408189.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:49.498Z,1516408189.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:49.881Z,1516408189.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:49.895Z,1516408189.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:50.281Z,1516408190.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:50.295Z,1516408190.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:50.674Z,1516408190.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:50.693Z,1516408190.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:51.071Z,1516408191.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:51.094Z,1516408191.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:51.487Z,1516408191.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:51.500Z,1516408191.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:51.879Z,1516408191.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:51.905Z,1516408191.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:52.290Z,1516408192.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:52.304Z,1516408192.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:52.681Z,1516408192.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:52.695Z,1516408192.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:53.073Z,1516408193.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:53.095Z,1516408193.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:53.474Z,1516408193.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:53.495Z,1516408193.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:53.881Z,1516408193.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:53.895Z,1516408193.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:54.283Z,1516408194.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:54.297Z,1516408194.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:54.689Z,1516408194.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:54.703Z,1516408194.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:55.090Z,1516408195.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:55.104Z,1516408195.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:55.474Z,1516408195.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:55.492Z,1516408195.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:55.871Z,1516408195.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:55.894Z,1516408195.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:56.277Z,1516408196.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:56.291Z,1516408196.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:56.664Z,1516408196.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:56.698Z,1516408196.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:57.080Z,1516408197.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:57.095Z,1516408197.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:57.484Z,1516408197.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:57.502Z,1516408197.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:57.886Z,1516408197.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:57.904Z,1516408197.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:58.290Z,1516408198.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:58.304Z,1516408198.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:58.663Z,1516408198.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:58.691Z,1516408198.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:59.061Z,1516408199.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:59.092Z,1516408199.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:59.472Z,1516408199.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:59.498Z,1516408199.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:29:59.863Z,1516408199.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:29:59.895Z,1516408199.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:00.290Z,1516408200.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:00.305Z,1516408200.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:00.690Z,1516408200.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:00.704Z,1516408200.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:01.086Z,1516408201.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:01.100Z,1516408201.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:01.463Z,1516408201.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:01.495Z,1516408201.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:01.871Z,1516408201.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:01.902Z,1516408201.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:02.264Z,1516408202.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:02.299Z,1516408202.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:02.662Z,1516408202.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:02.676Z,1516408202.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:03.091Z,1516408203.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:03.118Z,1516408203.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:03.483Z,1516408203.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:03.497Z,1516408203.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:03.885Z,1516408203.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:03.899Z,1516408203.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:04.285Z,1516408204.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:04.299Z,1516408204.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:04.663Z,1516408204.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:04.697Z,1516408204.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:05.069Z,1516408205.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:05.095Z,1516408205.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:05.480Z,1516408205.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:05.494Z,1516408205.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:05.863Z,1516408205.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:05.889Z,1516408205.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:06.289Z,1516408206.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:06.304Z,1516408206.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:06.690Z,1516408206.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:06.704Z,1516408206.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:07.090Z,1516408207.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:07.104Z,1516408207.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:07.465Z,1516408207.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:07.492Z,1516408207.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:07.871Z,1516408207.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:07.896Z,1516408207.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:08.264Z,1516408208.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:08.295Z,1516408208.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:08.662Z,1516408208.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:08.692Z,1516408208.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:09.071Z,1516408209.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:09.096Z,1516408209.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:09.474Z,1516408209.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:09.511Z,1516408209.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:09.874Z,1516408209.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:09.906Z,1516408209.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:10.286Z,1516408210.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:10.300Z,1516408210.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:10.663Z,1516408210.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:10.699Z,1516408210.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:11.061Z,1516408211.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:11.075Z,1516408211.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:11.472Z,1516408211.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:11.502Z,1516408211.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:11.867Z,1516408211.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:11.903Z,1516408211.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:12.278Z,1516408212.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:12.315Z,1516408212.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:12.682Z,1516408212.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:12.711Z,1516408212.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:13.091Z,1516408213.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:13.110Z,1516408213.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:13.463Z,1516408213.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:13.489Z,1516408213.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:13.873Z,1516408213.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:13.895Z,1516408213.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:14.280Z,1516408214.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:14.294Z,1516408214.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:14.670Z,1516408214.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:14.700Z,1516408214.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:15.079Z,1516408215.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:15.094Z,1516408215.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:15.482Z,1516408215.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:15.502Z,1516408215.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:15.885Z,1516408215.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:15.899Z,1516408215.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:16.286Z,1516408216.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:16.300Z,1516408216.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:16.663Z,1516408216.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:16.689Z,1516408216.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:17.073Z,1516408217.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:17.091Z,1516408217.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:17.471Z,1516408217.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:17.493Z,1516408217.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:17.876Z,1516408217.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:17.890Z,1516408217.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:18.290Z,1516408218.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:18.304Z,1516408218.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:18.688Z,1516408218.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:18.707Z,1516408218.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:19.090Z,1516408219.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:19.110Z,1516408219.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:19.461Z,1516408219.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:19.495Z,1516408219.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:19.870Z,1516408219.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:19.892Z,1516408219.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:20.276Z,1516408220.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:20.294Z,1516408220.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:20.680Z,1516408220.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:20.695Z,1516408220.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:21.074Z,1516408221.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:21.093Z,1516408221.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:21.482Z,1516408221.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:21.502Z,1516408221.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:21.878Z,1516408221.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:21.901Z,1516408221.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:22.289Z,1516408222.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:22.304Z,1516408222.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:22.663Z,1516408222.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:22.691Z,1516408222.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:23.061Z,1516408223.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:23.088Z,1516408223.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:23.472Z,1516408223.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:23.497Z,1516408223.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:23.863Z,1516408223.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:23.895Z,1516408223.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:24.290Z,1516408224.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:24.304Z,1516408224.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:24.690Z,1516408224.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:24.704Z,1516408224.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:25.086Z,1516408225.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:25.100Z,1516408225.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:25.465Z,1516408225.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:25.498Z,1516408225.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:25.867Z,1516408225.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:25.892Z,1516408225.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:26.263Z,1516408226.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:26.299Z,1516408226.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:26.672Z,1516408226.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:26.698Z,1516408226.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:27.067Z,1516408227.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:27.093Z,1516408227.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:27.492Z,1516408227.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:27.506Z,1516408227.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:27.878Z,1516408227.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:27.903Z,1516408227.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:28.291Z,1516408228.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:28.305Z,1516408228.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:28.669Z,1516408228.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:28.696Z,1516408228.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:29.066Z,1516408229.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:29.099Z,1516408229.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:29.470Z,1516408229.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:29.503Z,1516408229.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:29.872Z,1516408229.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:29.900Z,1516408229.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:30.287Z,1516408230.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:30.302Z,1516408230.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:30.692Z,1516408230.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:30.706Z,1516408230.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:31.083Z,1516408231.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:31.102Z,1516408231.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:31.467Z,1516408231.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:31.509Z,1516408231.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:31.871Z,1516408231.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:31.897Z,1516408231.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:32.275Z,1516408232.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:32.302Z,1516408232.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:32.672Z,1516408232.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:32.698Z,1516408232.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:33.069Z,1516408233.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:33.098Z,1516408233.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:33.487Z,1516408233.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:33.501Z,1516408233.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:36.570Z,1516408236.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:36.592Z,1516408236.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:36.702Z,1516408236.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:36.716Z,1516408236.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:37.046Z,1516408237.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:37.067Z,1516408237.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:37.454Z,1516408237.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:37.467Z,1516408237.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:37.838Z,1516408237.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:37.887Z,1516408237.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:38.252Z,1516408238.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:38.267Z,1516408238.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:38.662Z,1516408238.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:38.676Z,1516408238.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:39.047Z,1516408239.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:39.070Z,1516408239.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:39.451Z,1516408239.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:39.494Z,1516408239.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:39.854Z,1516408239.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:39.860Z,1516408239.860 [PNI_TCM](ERROR): CRC does not match. Expected:0x7950 got:0x1857
2018-01-20T00:30:39.891Z,1516408239.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:40.256Z,1516408240.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:40.270Z,1516408240.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:40.654Z,1516408240.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:40.668Z,1516408240.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:41.054Z,1516408241.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:41.093Z,1516408241.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:41.454Z,1516408241.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:41.460Z,1516408241.460 [PNI_TCM](ERROR): CRC does not match. Expected:0x245 got:0x149
2018-01-20T00:30:41.496Z,1516408241.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:41.849Z,1516408241.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:41.867Z,1516408241.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:42.258Z,1516408242.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:42.272Z,1516408242.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:42.653Z,1516408242.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:42.691Z,1516408242.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:43.054Z,1516408243.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:43.062Z,1516408243.062 [PNI_TCM](ERROR): CRC does not match. Expected:0x36949 got:0x49483
2018-01-20T00:30:43.097Z,1516408243.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:43.448Z,1516408243.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:43.462Z,1516408243.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:43.839Z,1516408243.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:43.861Z,1516408243.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:44.252Z,1516408244.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:44.292Z,1516408244.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:44.656Z,1516408244.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:44.664Z,1516408244.664 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2018-01-20T00:30:44.700Z,1516408244.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:45.055Z,1516408245.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:45.075Z,1516408245.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:45.453Z,1516408245.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:45.467Z,1516408245.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:45.851Z,1516408245.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:45.876Z,1516408245.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:46.250Z,1516408246.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:46.268Z,1516408246.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:46.659Z,1516408246.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:46.679Z,1516408246.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:47.061Z,1516408247.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:47.075Z,1516408247.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:47.452Z,1516408247.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:47.491Z,1516408247.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:47.851Z,1516408247.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:47.869Z,1516408247.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:48.259Z,1516408248.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:48.273Z,1516408248.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:48.657Z,1516408248.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:48.675Z,1516408248.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:49.061Z,1516408249.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:49.100Z,1516408249.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:49.453Z,1516408249.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:49.461Z,1516408249.461 [PNI_TCM](ERROR): CRC does not match. Expected:0x33628 got:0x46737
2018-01-20T00:30:49.479Z,1516408249.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:49.833Z,1516408249.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:49.864Z,1516408249.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:50.258Z,1516408250.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:50.287Z,1516408250.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:50.667Z,1516408250.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:50.695Z,1516408250.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:51.050Z,1516408251.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:51.075Z,1516408251.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:51.440Z,1516408251.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:51.472Z,1516408251.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:51.840Z,1516408251.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:51.874Z,1516408251.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:52.263Z,1516408252.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:52.295Z,1516408252.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:52.667Z,1516408252.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:52.683Z,1516408252.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:53.066Z,1516408253.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:53.079Z,1516408253.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:53.457Z,1516408253.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:53.472Z,1516408253.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:53.839Z,1516408253.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:53.886Z,1516408253.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:54.262Z,1516408254.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:54.280Z,1516408254.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:54.657Z,1516408254.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:54.679Z,1516408254.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:55.059Z,1516408255.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:55.088Z,1516408255.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:55.444Z,1516408255.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:55.487Z,1516408255.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:55.833Z,1516408255.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:55.859Z,1516408255.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:56.259Z,1516408256.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:56.276Z,1516408256.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:56.662Z,1516408256.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:56.687Z,1516408256.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:57.046Z,1516408257.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:57.090Z,1516408257.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:57.444Z,1516408257.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:57.470Z,1516408257.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:57.839Z,1516408257.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:57.875Z,1516408257.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:58.266Z,1516408258.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:58.280Z,1516408258.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:58.662Z,1516408258.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:58.696Z,1516408258.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:59.063Z,1516408259.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:59.080Z,1516408259.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:59.438Z,1516408259.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:59.460Z,1516408259.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:30:59.843Z,1516408259.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:30:59.878Z,1516408259.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:00.246Z,1516408260.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:00.273Z,1516408260.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:00.650Z,1516408260.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:00.688Z,1516408260.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:01.070Z,1516408261.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:01.086Z,1516408261.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:01.448Z,1516408261.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:01.477Z,1516408261.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:01.841Z,1516408261.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:01.856Z,1516408261.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:02.258Z,1516408262.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:02.288Z,1516408262.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:02.654Z,1516408262.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:02.685Z,1516408262.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:03.054Z,1516408263.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:03.081Z,1516408263.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:03.445Z,1516408263.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:03.491Z,1516408263.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:03.844Z,1516408263.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:03.857Z,1516408263.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:04.258Z,1516408264.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:04.286Z,1516408264.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:04.658Z,1516408264.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:04.686Z,1516408264.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:05.050Z,1516408265.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:05.078Z,1516408265.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:05.441Z,1516408265.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:05.456Z,1516408265.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:05.848Z,1516408265.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:05.863Z,1516408265.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:06.249Z,1516408266.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:06.264Z,1516408266.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:06.647Z,1516408266.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:06.662Z,1516408266.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:07.058Z,1516408267.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:07.094Z,1516408267.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:07.458Z,1516408267.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:07.485Z,1516408267.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:07.840Z,1516408267.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:07.861Z,1516408267.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:08.245Z,1516408268.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:08.264Z,1516408268.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:08.636Z,1516408268.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:08.668Z,1516408268.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:09.045Z,1516408269.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:09.063Z,1516408269.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:09.461Z,1516408269.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:09.480Z,1516408269.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:09.862Z,1516408269.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:09.876Z,1516408269.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:10.262Z,1516408270.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:10.276Z,1516408270.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:10.652Z,1516408270.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:10.671Z,1516408270.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:11.049Z,1516408271.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:11.063Z,1516408271.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:11.435Z,1516408271.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:11.467Z,1516408271.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:11.847Z,1516408271.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:11.867Z,1516408271.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:12.235Z,1516408272.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:12.270Z,1516408272.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:12.659Z,1516408272.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:12.674Z,1516408272.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:13.061Z,1516408273.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:13.075Z,1516408273.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:13.453Z,1516408273.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:13.479Z,1516408273.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:13.845Z,1516408273.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:13.862Z,1516408273.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:14.242Z,1516408274.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:14.263Z,1516408274.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:14.636Z,1516408274.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:14.670Z,1516408274.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:15.045Z,1516408275.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:15.062Z,1516408275.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:15.457Z,1516408275.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:15.471Z,1516408275.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:15.858Z,1516408275.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:15.872Z,1516408275.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:16.254Z,1516408276.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:16.268Z,1516408276.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:16.642Z,1516408276.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:16.664Z,1516408276.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:17.035Z,1516408277.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:17.070Z,1516408277.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:17.445Z,1516408277.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:17.462Z,1516408277.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:17.846Z,1516408277.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:17.865Z,1516408277.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:18.235Z,1516408278.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:18.277Z,1516408278.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:18.657Z,1516408278.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:18.672Z,1516408278.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:19.060Z,1516408279.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:19.075Z,1516408279.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:19.462Z,1516408279.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:19.476Z,1516408279.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:19.833Z,1516408279.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:19.867Z,1516408279.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:20.251Z,1516408280.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:20.271Z,1516408280.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:20.653Z,1516408280.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:20.667Z,1516408280.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:21.045Z,1516408281.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:21.062Z,1516408281.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:21.457Z,1516408281.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:21.471Z,1516408281.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:21.859Z,1516408281.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:21.872Z,1516408281.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:22.254Z,1516408282.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:22.272Z,1516408282.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:22.642Z,1516408282.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:22.664Z,1516408282.664 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:22.664Z,1516408282.664 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-01-20T00:31:22.664Z,1516408282.664 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:31:22.666Z,1516408282.666 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:22.666Z,1516408282.666 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-01-20T00:31:22.666Z,1516408282.666 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:31:22.668Z,1516408282.668 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:22.668Z,1516408282.668 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 67
2018-01-20T00:31:22.668Z,1516408282.668 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:31:22.680Z,1516408282.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:31:22.680Z,1516408282.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:31:22.681Z,1516408282.681 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:31:23.038Z,1516408283.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:23.083Z,1516408283.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:31:23.083Z,1516408283.083 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-01-20T00:31:23.083Z,1516408283.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:31:23.083Z,1516408283.083 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-01-20T00:31:23.084Z,1516408283.084 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:31:23.084Z,1516408283.084 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 67
2018-01-20T00:31:23.435Z,1516408283.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:23.459Z,1516408283.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:31:23.460Z,1516408283.460 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:31:23.460Z,1516408283.460 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:31:23.460Z,1516408283.460 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:31:23.461Z,1516408283.461 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:31:23.461Z,1516408283.461 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:31:23.461Z,1516408283.461 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:31:23.462Z,1516408283.462 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:31:23.462Z,1516408283.462 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:31:23.860Z,1516408283.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:23.874Z,1516408283.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:31:23.875Z,1516408283.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:24.239Z,1516408284.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:24.274Z,1516408284.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:31:24.275Z,1516408284.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:24.646Z,1516408284.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:24.678Z,1516408284.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:31:24.679Z,1516408284.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:25.059Z,1516408285.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:25.078Z,1516408285.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:31:25.079Z,1516408285.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:25.459Z,1516408285.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:25.478Z,1516408285.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:31:25.479Z,1516408285.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:25.837Z,1516408285.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:25.858Z,1516408285.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:31:25.859Z,1516408285.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:26.247Z,1516408286.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:26.271Z,1516408286.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:31:26.272Z,1516408286.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:26.640Z,1516408286.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:26.675Z,1516408286.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:31:26.676Z,1516408286.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:27.033Z,1516408287.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:27.047Z,1516408287.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:31:27.048Z,1516408287.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:27.450Z,1516408287.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:27.475Z,1516408287.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:31:27.476Z,1516408287.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:27.854Z,1516408287.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:27.882Z,1516408287.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:31:27.883Z,1516408287.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:28.254Z,1516408288.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:28.279Z,1516408288.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:31:28.280Z,1516408288.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:28.638Z,1516408288.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:28.674Z,1516408288.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:31:28.675Z,1516408288.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:29.043Z,1516408289.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:29.082Z,1516408289.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:31:29.083Z,1516408289.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:29.434Z,1516408289.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:29.448Z,1516408289.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:31:29.449Z,1516408289.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:29.848Z,1516408289.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:29.878Z,1516408289.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:31:29.879Z,1516408289.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:30.247Z,1516408290.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:30.286Z,1516408290.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:31:30.287Z,1516408290.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:30.654Z,1516408290.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:30.668Z,1516408290.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:31:30.685Z,1516408290.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:31.058Z,1516408291.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:31.072Z,1516408291.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:31:31.072Z,1516408291.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:31.462Z,1516408291.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:31.476Z,1516408291.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:31:31.500Z,1516408291.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:31.836Z,1516408291.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:31.862Z,1516408291.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:31:31.863Z,1516408291.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:32.247Z,1516408292.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:32.261Z,1516408292.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:31:32.262Z,1516408292.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:32.652Z,1516408292.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:32.666Z,1516408292.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:31:32.667Z,1516408292.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:33.038Z,1516408293.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:33.058Z,1516408293.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:31:33.059Z,1516408293.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:33.454Z,1516408293.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:33.468Z,1516408293.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:31:33.469Z,1516408293.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:33.854Z,1516408293.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:33.868Z,1516408293.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:31:33.869Z,1516408293.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:36.940Z,1516408296.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:36.954Z,1516408296.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-01-20T00:31:36.955Z,1516408296.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:37.057Z,1516408297.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:37.102Z,1516408297.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:31:37.103Z,1516408297.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:37.410Z,1516408297.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:37.424Z,1516408297.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:31:37.425Z,1516408297.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:37.813Z,1516408297.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:37.827Z,1516408297.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:31:37.828Z,1516408297.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:38.206Z,1516408298.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:38.220Z,1516408298.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:31:38.220Z,1516408298.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:38.622Z,1516408298.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:38.644Z,1516408298.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:31:38.645Z,1516408298.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:39.022Z,1516408299.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:39.047Z,1516408299.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:31:39.048Z,1516408299.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:39.410Z,1516408299.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:39.424Z,1516408299.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:31:39.425Z,1516408299.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:39.809Z,1516408299.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:39.823Z,1516408299.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:31:39.823Z,1516408299.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:40.212Z,1516408300.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:40.226Z,1516408300.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:31:40.227Z,1516408300.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:40.610Z,1516408300.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:40.630Z,1516408300.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:31:40.631Z,1516408300.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:41.010Z,1516408301.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:41.032Z,1516408301.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:31:41.037Z,1516408301.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:41.419Z,1516408301.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:41.432Z,1516408301.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:31:41.433Z,1516408301.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:41.818Z,1516408301.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:41.831Z,1516408301.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:31:41.832Z,1516408301.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:42.216Z,1516408302.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:42.234Z,1516408302.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:31:42.235Z,1516408302.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:42.615Z,1516408302.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:42.630Z,1516408302.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T00:31:42.631Z,1516408302.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:43.008Z,1516408303.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:43.026Z,1516408303.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:43.415Z,1516408303.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:43.430Z,1516408303.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:43.818Z,1516408303.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:43.832Z,1516408303.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:44.222Z,1516408304.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:44.237Z,1516408304.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:44.617Z,1516408304.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:44.631Z,1516408304.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:45.013Z,1516408305.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:45.027Z,1516408305.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:45.416Z,1516408305.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:45.430Z,1516408305.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:45.817Z,1516408305.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:45.831Z,1516408305.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:46.216Z,1516408306.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:46.230Z,1516408306.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:46.615Z,1516408306.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:46.643Z,1516408306.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:47.023Z,1516408307.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:47.039Z,1516408307.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:47.422Z,1516408307.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:47.436Z,1516408307.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:47.809Z,1516408307.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:47.824Z,1516408307.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:48.209Z,1516408308.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:48.228Z,1516408308.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:48.608Z,1516408308.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:48.627Z,1516408308.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:49.005Z,1516408309.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:49.027Z,1516408309.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:49.410Z,1516408309.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:49.428Z,1516408309.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:49.818Z,1516408309.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:49.832Z,1516408309.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:50.221Z,1516408310.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:50.239Z,1516408310.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:50.620Z,1516408310.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:50.643Z,1516408310.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:51.016Z,1516408311.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:51.030Z,1516408311.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:51.415Z,1516408311.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:51.435Z,1516408311.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:51.811Z,1516408311.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:51.825Z,1516408311.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:52.212Z,1516408312.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:52.230Z,1516408312.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:52.617Z,1516408312.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:52.632Z,1516408312.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:53.020Z,1516408313.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:53.039Z,1516408313.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:53.421Z,1516408313.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:53.435Z,1516408313.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:53.808Z,1516408313.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:53.826Z,1516408313.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:54.206Z,1516408314.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:54.232Z,1516408314.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:54.616Z,1516408314.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:54.630Z,1516408314.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:55.000Z,1516408315.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:55.027Z,1516408315.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:55.414Z,1516408315.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:55.435Z,1516408315.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:55.817Z,1516408315.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:55.832Z,1516408315.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:56.222Z,1516408316.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:56.239Z,1516408316.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:56.622Z,1516408316.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:56.636Z,1516408316.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:56.000Z,1516408317.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:57.030Z,1516408317.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:57.397Z,1516408317.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:57.435Z,1516408317.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:57.808Z,1516408317.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:57.833Z,1516408317.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:58.199Z,1516408318.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:58.231Z,1516408318.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:58.614Z,1516408318.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:58.635Z,1516408318.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:59.026Z,1516408319.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:59.040Z,1516408319.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:59.422Z,1516408319.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:59.436Z,1516408319.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:31:59.801Z,1516408319.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:31:59.835Z,1516408319.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:00.203Z,1516408320.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:00.228Z,1516408320.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:00.599Z,1516408320.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:00.631Z,1516408320.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:01.002Z,1516408321.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:01.027Z,1516408321.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:01.403Z,1516408321.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:01.434Z,1516408321.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:01.821Z,1516408321.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:01.849Z,1516408321.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:02.220Z,1516408322.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:02.239Z,1516408322.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:02.622Z,1516408322.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:02.636Z,1516408322.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:03.004Z,1516408323.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:03.030Z,1516408323.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:03.407Z,1516408323.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:03.432Z,1516408323.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:03.804Z,1516408323.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:03.830Z,1516408323.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:04.204Z,1516408324.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:04.230Z,1516408324.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:04.622Z,1516408324.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:04.636Z,1516408324.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:05.026Z,1516408325.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:05.040Z,1516408325.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:05.423Z,1516408325.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:05.437Z,1516408325.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:05.801Z,1516408325.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:05.834Z,1516408325.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:06.203Z,1516408326.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:06.228Z,1516408326.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:06.604Z,1516408326.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:06.639Z,1516408326.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:07.002Z,1516408327.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:07.028Z,1516408327.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:07.403Z,1516408327.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:07.428Z,1516408327.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:07.823Z,1516408327.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:07.837Z,1516408327.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:08.230Z,1516408328.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:08.244Z,1516408328.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:08.622Z,1516408328.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:08.636Z,1516408328.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:09.004Z,1516408329.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:09.030Z,1516408329.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:09.398Z,1516408329.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:09.434Z,1516408329.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:09.808Z,1516408329.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:09.833Z,1516408329.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:10.204Z,1516408330.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:10.230Z,1516408330.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:10.614Z,1516408330.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:10.635Z,1516408330.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:11.026Z,1516408331.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:11.040Z,1516408331.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:11.423Z,1516408331.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:11.437Z,1516408331.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:11.799Z,1516408331.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:11.830Z,1516408331.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:12.207Z,1516408332.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:12.232Z,1516408332.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:12.604Z,1516408332.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:12.634Z,1516408332.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:13.004Z,1516408333.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:13.038Z,1516408333.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:13.407Z,1516408333.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:13.438Z,1516408333.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:13.814Z,1516408333.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:13.851Z,1516408333.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:14.228Z,1516408334.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:14.242Z,1516408334.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:14.632Z,1516408334.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:14.646Z,1516408334.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:15.010Z,1516408335.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:15.041Z,1516408335.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:15.407Z,1516408335.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:15.443Z,1516408335.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:15.812Z,1516408335.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:15.826Z,1516408335.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:16.212Z,1516408336.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:16.231Z,1516408336.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:16.622Z,1516408336.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:16.636Z,1516408336.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:17.018Z,1516408337.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:17.032Z,1516408337.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:17.426Z,1516408337.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:17.440Z,1516408337.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:17.812Z,1516408337.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:17.826Z,1516408337.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:18.213Z,1516408338.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:18.227Z,1516408338.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:18.618Z,1516408338.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:18.632Z,1516408338.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:19.006Z,1516408339.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:19.027Z,1516408339.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:19.417Z,1516408339.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:19.431Z,1516408339.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:19.819Z,1516408339.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:19.834Z,1516408339.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:20.218Z,1516408340.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:20.232Z,1516408340.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:20.620Z,1516408340.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:20.634Z,1516408340.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:21.017Z,1516408341.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:21.031Z,1516408341.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:21.415Z,1516408341.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:21.435Z,1516408341.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:21.815Z,1516408341.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:21.831Z,1516408341.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:22.208Z,1516408342.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:22.222Z,1516408342.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:22.617Z,1516408342.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:22.632Z,1516408342.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:23.018Z,1516408343.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:23.032Z,1516408343.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:23.418Z,1516408343.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:23.439Z,1516408343.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:23.816Z,1516408343.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:23.830Z,1516408343.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:24.217Z,1516408344.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:24.231Z,1516408344.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:24.609Z,1516408344.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:24.623Z,1516408344.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:25.016Z,1516408345.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:25.035Z,1516408345.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:25.416Z,1516408345.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:25.430Z,1516408345.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:25.819Z,1516408345.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:25.833Z,1516408345.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:26.223Z,1516408346.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:26.243Z,1516408346.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:26.622Z,1516408346.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:26.636Z,1516408346.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:27.008Z,1516408347.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:27.026Z,1516408347.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:27.415Z,1516408347.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:27.431Z,1516408347.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:27.810Z,1516408347.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:27.830Z,1516408347.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:28.209Z,1516408348.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:28.231Z,1516408348.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:28.621Z,1516408348.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:28.636Z,1516408348.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:29.025Z,1516408349.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:29.040Z,1516408349.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:29.418Z,1516408349.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:29.432Z,1516408349.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:29.799Z,1516408349.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:29.824Z,1516408349.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:30.203Z,1516408350.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:30.234Z,1516408350.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:30.616Z,1516408350.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:30.630Z,1516408350.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:31.016Z,1516408351.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:31.030Z,1516408351.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:31.403Z,1516408351.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:31.439Z,1516408351.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:31.826Z,1516408351.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:31.841Z,1516408351.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:32.229Z,1516408352.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:32.243Z,1516408352.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:32.622Z,1516408352.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:32.636Z,1516408352.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:32.999Z,1516408352.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:33.031Z,1516408353.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:33.407Z,1516408353.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:33.433Z,1516408353.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:33.804Z,1516408353.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:33.851Z,1516408353.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:34.208Z,1516408354.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:34.234Z,1516408354.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:37.315Z,1516408357.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:37.335Z,1516408357.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:37.446Z,1516408357.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:37.484Z,1516408357.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:37.798Z,1516408357.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:37.812Z,1516408357.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:38.194Z,1516408358.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:38.208Z,1516408358.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:38.587Z,1516408358.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:38.605Z,1516408358.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:38.991Z,1516408358.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:39.011Z,1516408359.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:39.393Z,1516408359.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:39.407Z,1516408359.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:39.794Z,1516408359.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:39.808Z,1516408359.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:40.206Z,1516408360.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:40.236Z,1516408360.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:40.598Z,1516408360.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:40.636Z,1516408360.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:40.984Z,1516408360.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:41.002Z,1516408361.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:41.393Z,1516408361.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:41.407Z,1516408361.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:41.794Z,1516408361.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:41.814Z,1516408361.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:42.189Z,1516408362.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:42.203Z,1516408362.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:42.594Z,1516408362.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:42.608Z,1516408362.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:42.998Z,1516408362.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:43.012Z,1516408363.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:43.406Z,1516408363.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:43.420Z,1516408363.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:43.796Z,1516408363.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:43.810Z,1516408363.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:44.191Z,1516408364.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:44.211Z,1516408364.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:44.582Z,1516408364.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:44.603Z,1516408364.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:44.990Z,1516408364.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:45.008Z,1516408365.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:45.397Z,1516408365.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:45.411Z,1516408365.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:45.798Z,1516408365.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:45.812Z,1516408365.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:46.201Z,1516408366.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:46.223Z,1516408366.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:46.601Z,1516408366.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:46.615Z,1516408366.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:46.988Z,1516408366.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:47.010Z,1516408367.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:47.386Z,1516408367.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:47.408Z,1516408367.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:47.794Z,1516408367.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:47.808Z,1516408367.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:48.179Z,1516408368.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:48.213Z,1516408368.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:48.602Z,1516408368.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:48.616Z,1516408368.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:49.006Z,1516408369.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:49.020Z,1516408369.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:49.406Z,1516408369.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:49.420Z,1516408369.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:49.795Z,1516408369.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:49.815Z,1516408369.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:50.197Z,1516408370.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:50.211Z,1516408370.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:50.579Z,1516408370.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:50.611Z,1516408370.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:50.990Z,1516408370.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:51.017Z,1516408371.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:51.383Z,1516408371.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:51.419Z,1516408371.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:51.806Z,1516408371.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:51.821Z,1516408371.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:52.206Z,1516408372.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:52.220Z,1516408372.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:52.603Z,1516408372.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:52.617Z,1516408372.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:52.979Z,1516408372.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:53.011Z,1516408373.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:53.383Z,1516408373.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:53.414Z,1516408373.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:53.784Z,1516408373.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:53.815Z,1516408373.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:54.183Z,1516408374.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:54.199Z,1516408374.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:54.598Z,1516408374.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:54.623Z,1516408374.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:55.002Z,1516408375.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:55.031Z,1516408375.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:55.394Z,1516408375.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:55.424Z,1516408375.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:55.791Z,1516408375.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:55.805Z,1516408375.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:56.185Z,1516408376.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:56.208Z,1516408376.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:56.594Z,1516408376.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:56.608Z,1516408376.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:56.991Z,1516408376.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:57.019Z,1516408377.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:57.394Z,1516408377.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:57.408Z,1516408377.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:57.807Z,1516408377.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:57.836Z,1516408377.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:58.199Z,1516408378.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:58.235Z,1516408378.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:58.607Z,1516408378.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:58.637Z,1516408378.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:58.992Z,1516408378.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:59.007Z,1516408379.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:59.396Z,1516408379.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:59.411Z,1516408379.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:32:59.789Z,1516408379.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:32:59.804Z,1516408379.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:00.192Z,1516408380.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:00.211Z,1516408380.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:00.598Z,1516408380.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:00.614Z,1516408380.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:00.998Z,1516408380.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:01.012Z,1516408381.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:01.398Z,1516408381.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:01.412Z,1516408381.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:01.792Z,1516408381.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:01.815Z,1516408381.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:02.197Z,1516408382.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:02.211Z,1516408382.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:02.597Z,1516408382.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:02.611Z,1516408382.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:02.991Z,1516408382.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:03.014Z,1516408383.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:03.397Z,1516408383.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:03.410Z,1516408383.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:03.801Z,1516408383.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:03.815Z,1516408383.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:04.203Z,1516408384.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:04.217Z,1516408384.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:04.599Z,1516408384.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:04.614Z,1516408384.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:04.991Z,1516408384.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:05.011Z,1516408385.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:05.390Z,1516408385.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:05.411Z,1516408385.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:05.789Z,1516408385.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:05.824Z,1516408385.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:06.196Z,1516408386.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:06.210Z,1516408386.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:06.601Z,1516408386.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:06.616Z,1516408386.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:07.002Z,1516408387.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:07.015Z,1516408387.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:07.401Z,1516408387.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:07.415Z,1516408387.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:07.795Z,1516408387.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:07.810Z,1516408387.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:08.188Z,1516408388.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:08.206Z,1516408388.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:08.595Z,1516408388.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:08.615Z,1516408388.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:08.996Z,1516408388.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:09.015Z,1516408389.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:09.396Z,1516408389.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:09.410Z,1516408389.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:09.801Z,1516408389.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:09.815Z,1516408389.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:10.202Z,1516408390.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:10.216Z,1516408390.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:10.602Z,1516408390.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:10.616Z,1516408390.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:11.000Z,1516408391.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:11.020Z,1516408391.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:11.396Z,1516408391.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:11.415Z,1516408391.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:11.797Z,1516408391.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:11.811Z,1516408391.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:12.196Z,1516408392.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:12.210Z,1516408392.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:12.606Z,1516408392.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:12.621Z,1516408392.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:13.002Z,1516408393.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:13.016Z,1516408393.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:13.405Z,1516408393.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:13.427Z,1516408393.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:13.795Z,1516408393.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:13.815Z,1516408393.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:14.195Z,1516408394.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:14.209Z,1516408394.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:14.595Z,1516408394.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:14.615Z,1516408394.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:14.990Z,1516408394.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:15.017Z,1516408395.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:15.396Z,1516408395.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:15.410Z,1516408395.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:15.806Z,1516408395.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:15.820Z,1516408395.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:16.206Z,1516408396.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:16.227Z,1516408396.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:16.607Z,1516408396.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:16.620Z,1516408396.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:16.999Z,1516408396.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:17.032Z,1516408397.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:17.393Z,1516408397.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:17.407Z,1516408397.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:17.789Z,1516408397.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:17.803Z,1516408397.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:18.193Z,1516408398.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:18.231Z,1516408398.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:18.602Z,1516408398.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:18.616Z,1516408398.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:19.006Z,1516408399.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:19.020Z,1516408399.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:19.398Z,1516408399.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:19.412Z,1516408399.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:19.793Z,1516408399.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:19.807Z,1516408399.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:20.193Z,1516408400.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:20.207Z,1516408400.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:20.593Z,1516408400.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:20.607Z,1516408400.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:20.994Z,1516408400.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:21.008Z,1516408401.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:21.392Z,1516408401.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:21.407Z,1516408401.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:21.807Z,1516408401.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:21.820Z,1516408401.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:22.202Z,1516408402.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:22.216Z,1516408402.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:22.598Z,1516408402.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:22.612Z,1516408402.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:22.996Z,1516408402.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:23.010Z,1516408403.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:23.391Z,1516408403.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:23.411Z,1516408403.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:23.796Z,1516408403.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:23.810Z,1516408403.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:24.196Z,1516408404.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:24.210Z,1516408404.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:24.597Z,1516408404.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:24.619Z,1516408404.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:25.002Z,1516408405.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:25.016Z,1516408405.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:25.397Z,1516408405.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:25.411Z,1516408405.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:25.791Z,1516408405.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:25.811Z,1516408405.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:26.196Z,1516408406.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:26.210Z,1516408406.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:26.595Z,1516408406.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:26.610Z,1516408406.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:26.995Z,1516408406.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:27.015Z,1516408407.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:27.396Z,1516408407.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:27.410Z,1516408407.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:27.802Z,1516408407.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:27.816Z,1516408407.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:28.202Z,1516408408.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:28.216Z,1516408408.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:28.602Z,1516408408.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:28.622Z,1516408408.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:28.989Z,1516408408.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:29.003Z,1516408409.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:29.399Z,1516408409.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:29.414Z,1516408409.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:29.797Z,1516408409.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:29.811Z,1516408409.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:30.196Z,1516408410.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:30.210Z,1516408410.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:30.601Z,1516408410.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:30.616Z,1516408410.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:31.002Z,1516408411.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:31.016Z,1516408411.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:31.402Z,1516408411.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:31.423Z,1516408411.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:31.796Z,1516408411.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:31.810Z,1516408411.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:32.197Z,1516408412.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:32.210Z,1516408412.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:32.214Z,1516408412.214 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T00:28:31.0Z
2018-01-20T00:33:32.214Z,1516408412.214 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T00:33:32.214Z,1516408412.214 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T00:33:32.596Z,1516408412.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:32.615Z,1516408412.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:33.044Z,1516408413.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:33.058Z,1516408413.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:33.391Z,1516408413.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:33.405Z,1516408413.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:36.566Z,1516408416.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:36.597Z,1516408416.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:36.665Z,1516408416.665 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0080.lzma
2018-01-20T00:33:36.702Z,1516408416.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:36.740Z,1516408416.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:37.054Z,1516408417.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:37.068Z,1516408417.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:39.796Z,1516408419.796 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0080.lzma.bak
2018-01-20T00:33:39.796Z,1516408419.796 [DataOverHttps](INFO): SBD MOMSN=7725321
2018-01-20T00:33:39.823Z,1516408419.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:39.859Z,1516408419.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:40.055Z,1516408420.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:40.087Z,1516408420.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:40.334Z,1516408420.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:40.359Z,1516408420.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:43.434Z,1516408423.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:43.459Z,1516408423.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:43.579Z,1516408423.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:43.604Z,1516408423.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:43.914Z,1516408423.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:43.929Z,1516408423.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:44.320Z,1516408424.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:44.333Z,1516408424.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:44.715Z,1516408424.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:44.729Z,1516408424.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:45.120Z,1516408425.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:45.139Z,1516408425.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:48.214Z,1516408428.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:48.228Z,1516408428.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:48.310Z,1516408428.310 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180119T210901/Express0081.lzma
2018-01-20T00:33:48.361Z,1516408428.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:48.406Z,1516408428.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:48.700Z,1516408428.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:48.723Z,1516408428.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:49.059Z,1516408429.059 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0081.lzma.bak
2018-01-20T00:33:49.059Z,1516408429.059 [DataOverHttps](INFO): SBD MOMSN=7725323
2018-01-20T00:33:49.087Z,1516408429.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:49.119Z,1516408429.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:49.575Z,1516408429.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:49.611Z,1516408429.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:49.618Z,1516408429.618 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T00:33:49.618Z,1516408429.618 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T00:33:49.618Z,1516408429.618 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T00:33:49.882Z,1516408429.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:49.896Z,1516408429.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:52.985Z,1516408432.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:52.999Z,1516408432.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:53.116Z,1516408433.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:53.169Z,1516408433.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:53.514Z,1516408433.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:53.543Z,1516408433.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:53.922Z,1516408433.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:53.947Z,1516408433.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:54.293Z,1516408434.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:54.308Z,1516408434.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:54.716Z,1516408434.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:54.743Z,1516408434.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:55.116Z,1516408435.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:55.186Z,1516408435.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:55.499Z,1516408435.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:55.514Z,1516408435.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:55.919Z,1516408435.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:56.003Z,1516408436.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:56.308Z,1516408436.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:56.328Z,1516408436.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:56.703Z,1516408436.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:56.744Z,1516408436.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:57.132Z,1516408437.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:57.155Z,1516408437.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:57.493Z,1516408437.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:57.539Z,1516408437.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:57.897Z,1516408437.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:57.944Z,1516408437.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:58.293Z,1516408438.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:58.332Z,1516408438.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:58.704Z,1516408438.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:58.762Z,1516408438.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:59.108Z,1516408439.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:59.144Z,1516408439.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:59.512Z,1516408439.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:59.554Z,1516408439.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:33:59.893Z,1516408439.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:33:59.940Z,1516408439.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:00.301Z,1516408440.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:00.374Z,1516408440.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:00.701Z,1516408440.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:00.727Z,1516408440.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:01.113Z,1516408441.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:01.164Z,1516408441.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:01.493Z,1516408441.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:01.535Z,1516408441.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:01.912Z,1516408441.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:01.931Z,1516408441.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:02.307Z,1516408442.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:02.346Z,1516408442.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:02.704Z,1516408442.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:02.738Z,1516408442.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:03.093Z,1516408443.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:03.139Z,1516408443.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:03.493Z,1516408443.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:03.545Z,1516408443.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:03.894Z,1516408443.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:03.908Z,1516408443.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:04.316Z,1516408444.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:04.352Z,1516408444.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:04.720Z,1516408444.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:04.784Z,1516408444.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:05.112Z,1516408445.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:05.147Z,1516408445.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:05.541Z,1516408445.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:05.572Z,1516408445.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:05.899Z,1516408445.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:05.913Z,1516408445.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:06.294Z,1516408446.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:06.309Z,1516408446.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:06.696Z,1516408446.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:06.715Z,1516408446.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:07.101Z,1516408447.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:07.115Z,1516408447.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:07.493Z,1516408447.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:07.507Z,1516408447.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:07.906Z,1516408447.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:07.936Z,1516408447.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:08.302Z,1516408448.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:08.316Z,1516408448.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:08.702Z,1516408448.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:08.716Z,1516408448.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:09.100Z,1516408449.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:09.115Z,1516408449.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:09.496Z,1516408449.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:09.510Z,1516408449.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:09.901Z,1516408449.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:09.915Z,1516408449.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:10.300Z,1516408450.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:10.315Z,1516408450.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:10.698Z,1516408450.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:10.712Z,1516408450.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:11.098Z,1516408451.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:11.112Z,1516408451.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:11.514Z,1516408451.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:11.543Z,1516408451.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:11.899Z,1516408451.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:11.913Z,1516408451.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:12.296Z,1516408452.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:12.315Z,1516408452.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:12.693Z,1516408452.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:12.707Z,1516408452.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:13.096Z,1516408453.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:13.110Z,1516408453.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:13.485Z,1516408453.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:13.499Z,1516408453.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:13.906Z,1516408453.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:13.927Z,1516408453.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:14.302Z,1516408454.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:14.316Z,1516408454.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:14.698Z,1516408454.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:14.712Z,1516408454.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:15.095Z,1516408455.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:15.115Z,1516408455.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:15.495Z,1516408455.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:15.509Z,1516408455.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:15.913Z,1516408455.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:15.927Z,1516408455.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:16.293Z,1516408456.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:16.307Z,1516408456.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:16.706Z,1516408456.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:16.740Z,1516408456.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:17.098Z,1516408457.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:17.112Z,1516408457.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:17.506Z,1516408457.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:17.527Z,1516408457.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:17.888Z,1516408457.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:17.930Z,1516408457.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:18.288Z,1516408458.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:18.306Z,1516408458.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:18.696Z,1516408458.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:18.723Z,1516408458.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:19.101Z,1516408459.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:19.115Z,1516408459.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:19.497Z,1516408459.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:19.511Z,1516408459.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:19.914Z,1516408459.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:19.928Z,1516408459.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:20.310Z,1516408460.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:20.324Z,1516408460.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:20.702Z,1516408460.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:20.724Z,1516408460.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:21.102Z,1516408461.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:21.123Z,1516408461.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:21.504Z,1516408461.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:21.518Z,1516408461.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:21.901Z,1516408461.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:21.916Z,1516408461.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:22.295Z,1516408462.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:22.317Z,1516408462.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:22.707Z,1516408462.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:22.721Z,1516408462.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:23.113Z,1516408463.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:23.164Z,1516408463.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:23.514Z,1516408463.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:23.528Z,1516408463.528 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:23.528Z,1516408463.528 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-01-20T00:34:23.528Z,1516408463.528 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:34:23.530Z,1516408463.530 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:23.530Z,1516408463.530 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-01-20T00:34:23.530Z,1516408463.530 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:34:23.532Z,1516408463.532 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:23.532Z,1516408463.532 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 68
2018-01-20T00:34:23.532Z,1516408463.532 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:34:23.564Z,1516408463.564 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:34:23.564Z,1516408463.564 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:34:23.564Z,1516408463.564 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:34:23.900Z,1516408463.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:23.925Z,1516408463.925 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:34:23.925Z,1516408463.925 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-01-20T00:34:23.925Z,1516408463.925 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:34:23.925Z,1516408463.925 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-01-20T00:34:23.926Z,1516408463.926 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:34:23.926Z,1516408463.926 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 68
2018-01-20T00:34:24.287Z,1516408464.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:24.322Z,1516408464.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:34:24.322Z,1516408464.322 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:34:24.323Z,1516408464.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:34:24.323Z,1516408464.323 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:34:24.323Z,1516408464.323 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:34:24.324Z,1516408464.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:34:24.324Z,1516408464.324 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:34:24.324Z,1516408464.324 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:34:24.329Z,1516408464.329 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:34:24.690Z,1516408464.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:24.726Z,1516408464.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:34:24.727Z,1516408464.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:25.096Z,1516408465.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:25.129Z,1516408465.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:34:25.130Z,1516408465.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:25.490Z,1516408465.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:25.503Z,1516408465.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:34:25.504Z,1516408465.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:25.906Z,1516408465.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:25.940Z,1516408465.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:34:25.942Z,1516408465.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:26.320Z,1516408466.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:26.334Z,1516408466.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:34:26.335Z,1516408466.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:26.702Z,1516408466.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:26.727Z,1516408466.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:34:26.728Z,1516408466.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:27.092Z,1516408467.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:27.126Z,1516408467.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:34:27.127Z,1516408467.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:27.496Z,1516408467.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:27.509Z,1516408467.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:34:27.510Z,1516408467.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:27.901Z,1516408467.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:27.915Z,1516408467.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:34:27.916Z,1516408467.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:28.300Z,1516408468.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:28.318Z,1516408468.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:34:28.319Z,1516408468.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:28.715Z,1516408468.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:28.744Z,1516408468.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:34:28.745Z,1516408468.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:29.102Z,1516408469.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:29.122Z,1516408469.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:34:29.123Z,1516408469.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:29.515Z,1516408469.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:29.549Z,1516408469.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:34:29.550Z,1516408469.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:29.900Z,1516408469.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:29.914Z,1516408469.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:34:29.915Z,1516408469.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:30.301Z,1516408470.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:30.315Z,1516408470.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:34:30.315Z,1516408470.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:30.700Z,1516408470.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:30.714Z,1516408470.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:34:30.714Z,1516408470.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:31.098Z,1516408471.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:31.112Z,1516408471.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:34:31.113Z,1516408471.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:31.496Z,1516408471.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:31.514Z,1516408471.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:34:31.515Z,1516408471.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:31.914Z,1516408471.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:31.928Z,1516408471.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:34:31.949Z,1516408471.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:32.310Z,1516408472.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:32.323Z,1516408472.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:34:32.324Z,1516408472.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:32.703Z,1516408472.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:32.730Z,1516408472.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:34:32.731Z,1516408472.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:33.094Z,1516408473.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:33.127Z,1516408473.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:34:33.128Z,1516408473.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:33.505Z,1516408473.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:33.518Z,1516408473.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:34:33.519Z,1516408473.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:33.904Z,1516408473.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:33.919Z,1516408473.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:34:33.920Z,1516408473.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:34.291Z,1516408474.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:34.326Z,1516408474.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:34:34.327Z,1516408474.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:34.715Z,1516408474.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:34.729Z,1516408474.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:34:34.730Z,1516408474.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:35.106Z,1516408475.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:35.136Z,1516408475.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:34:35.137Z,1516408475.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:35.513Z,1516408475.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:35.528Z,1516408475.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:34:35.529Z,1516408475.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:35.887Z,1516408475.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:35.918Z,1516408475.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:34:35.919Z,1516408475.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:36.303Z,1516408476.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:36.322Z,1516408476.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T00:34:36.323Z,1516408476.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:36.691Z,1516408476.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:36.722Z,1516408476.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:34:36.723Z,1516408476.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:37.088Z,1516408477.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:37.122Z,1516408477.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:34:37.123Z,1516408477.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:37.489Z,1516408477.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:37.515Z,1516408477.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:34:37.516Z,1516408477.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:37.914Z,1516408477.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:37.928Z,1516408477.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:34:37.929Z,1516408477.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:38.318Z,1516408478.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:38.332Z,1516408478.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:34:38.333Z,1516408478.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:38.702Z,1516408478.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:38.723Z,1516408478.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:34:38.724Z,1516408478.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:39.091Z,1516408479.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:39.115Z,1516408479.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:34:39.116Z,1516408479.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:39.486Z,1516408479.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:39.518Z,1516408479.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:34:39.519Z,1516408479.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:39.896Z,1516408479.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:39.921Z,1516408479.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:34:39.922Z,1516408479.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:40.311Z,1516408480.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:40.325Z,1516408480.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:34:40.326Z,1516408480.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:40.711Z,1516408480.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:40.724Z,1516408480.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:34:40.725Z,1516408480.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:41.108Z,1516408481.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:41.127Z,1516408481.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:34:41.128Z,1516408481.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:41.510Z,1516408481.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:41.524Z,1516408481.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:34:41.525Z,1516408481.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:41.895Z,1516408481.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:41.921Z,1516408481.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:34:41.922Z,1516408481.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:42.295Z,1516408482.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:42.320Z,1516408482.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:34:42.321Z,1516408482.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:42.691Z,1516408482.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:42.716Z,1516408482.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:34:42.717Z,1516408482.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:43.088Z,1516408483.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:43.119Z,1516408483.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:34:43.120Z,1516408483.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:43.489Z,1516408483.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:43.522Z,1516408483.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T00:34:43.523Z,1516408483.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:43.914Z,1516408483.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:43.928Z,1516408483.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:44.311Z,1516408484.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:44.325Z,1516408484.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:44.698Z,1516408484.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:44.730Z,1516408484.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:45.091Z,1516408485.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:45.123Z,1516408485.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:45.487Z,1516408485.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:45.523Z,1516408485.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:45.896Z,1516408485.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:45.921Z,1516408485.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:46.291Z,1516408486.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:46.322Z,1516408486.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:46.711Z,1516408486.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:46.726Z,1516408486.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:47.110Z,1516408487.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:47.124Z,1516408487.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:47.510Z,1516408487.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:47.524Z,1516408487.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:47.891Z,1516408487.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:47.923Z,1516408487.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:48.295Z,1516408488.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:48.320Z,1516408488.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:48.691Z,1516408488.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:48.722Z,1516408488.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:49.092Z,1516408489.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:49.123Z,1516408489.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:49.489Z,1516408489.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:49.511Z,1516408489.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:49.914Z,1516408489.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:49.928Z,1516408489.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:50.315Z,1516408490.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:50.331Z,1516408490.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:53.394Z,1516408493.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:53.424Z,1516408493.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:53.527Z,1516408493.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:53.547Z,1516408493.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:53.879Z,1516408493.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:53.901Z,1516408493.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:54.288Z,1516408494.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:54.302Z,1516408494.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:54.688Z,1516408494.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:54.707Z,1516408494.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:55.094Z,1516408495.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:55.108Z,1516408495.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:55.490Z,1516408495.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:55.510Z,1516408495.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:55.880Z,1516408495.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:55.898Z,1516408495.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:56.289Z,1516408496.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:56.303Z,1516408496.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:56.688Z,1516408496.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:56.702Z,1516408496.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:57.087Z,1516408497.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:57.107Z,1516408497.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:57.482Z,1516408497.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:57.500Z,1516408497.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:57.890Z,1516408497.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:57.904Z,1516408497.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:58.289Z,1516408498.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:58.311Z,1516408498.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:58.689Z,1516408498.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:58.711Z,1516408498.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:59.089Z,1516408499.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:59.103Z,1516408499.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:59.481Z,1516408499.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:59.499Z,1516408499.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:34:59.882Z,1516408499.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:34:59.902Z,1516408499.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:00.285Z,1516408500.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:00.298Z,1516408500.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:00.695Z,1516408500.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:00.709Z,1516408500.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:01.095Z,1516408501.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:01.109Z,1516408501.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:01.494Z,1516408501.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:01.508Z,1516408501.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:01.880Z,1516408501.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:01.899Z,1516408501.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:02.285Z,1516408502.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:02.304Z,1516408502.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:02.685Z,1516408502.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:02.700Z,1516408502.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:03.089Z,1516408503.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:03.104Z,1516408503.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:03.484Z,1516408503.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:03.503Z,1516408503.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:03.894Z,1516408503.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:03.908Z,1516408503.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:04.299Z,1516408504.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:04.314Z,1516408504.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:04.698Z,1516408504.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:04.712Z,1516408504.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:05.075Z,1516408505.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:05.111Z,1516408505.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:05.475Z,1516408505.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:05.501Z,1516408505.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:05.886Z,1516408505.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:05.906Z,1516408505.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:06.288Z,1516408506.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:06.303Z,1516408506.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:06.690Z,1516408506.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:06.717Z,1516408506.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:07.102Z,1516408507.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:07.116Z,1516408507.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:07.492Z,1516408507.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:07.510Z,1516408507.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:07.880Z,1516408507.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:07.905Z,1516408507.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:08.280Z,1516408508.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:08.305Z,1516408508.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:08.674Z,1516408508.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:08.708Z,1516408508.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:09.091Z,1516408509.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:09.106Z,1516408509.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:09.493Z,1516408509.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:09.507Z,1516408509.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:09.894Z,1516408509.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:09.920Z,1516408509.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:10.294Z,1516408510.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:10.327Z,1516408510.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:10.702Z,1516408510.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:10.723Z,1516408510.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:11.079Z,1516408511.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:11.106Z,1516408511.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:11.473Z,1516408511.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:11.499Z,1516408511.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:11.881Z,1516408511.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:11.907Z,1516408511.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:12.295Z,1516408512.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:12.309Z,1516408512.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:12.694Z,1516408512.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:12.708Z,1516408512.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:13.106Z,1516408513.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:13.120Z,1516408513.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:13.501Z,1516408513.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:13.515Z,1516408513.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:13.921Z,1516408513.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:13.955Z,1516408513.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:14.278Z,1516408514.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:14.304Z,1516408514.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:14.679Z,1516408514.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:14.714Z,1516408514.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:15.082Z,1516408515.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:15.121Z,1516408515.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:15.478Z,1516408515.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:15.508Z,1516408515.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:15.903Z,1516408515.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:15.917Z,1516408515.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:16.303Z,1516408516.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:16.317Z,1516408516.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:16.688Z,1516408516.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:16.714Z,1516408516.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:17.073Z,1516408517.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:17.118Z,1516408517.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:17.471Z,1516408517.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:17.491Z,1516408517.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:17.882Z,1516408517.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:17.896Z,1516408517.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:18.276Z,1516408518.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:18.320Z,1516408518.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:18.692Z,1516408518.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:18.698Z,1516408518.698 [PNI_TCM](ERROR): CRC does not match. Expected:0x53138 got:0x17164
2018-01-20T00:35:18.727Z,1516408518.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:19.098Z,1516408519.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:19.127Z,1516408519.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:19.494Z,1516408519.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:19.527Z,1516408519.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:19.877Z,1516408519.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:19.922Z,1516408519.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:20.285Z,1516408520.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:20.300Z,1516408520.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:20.698Z,1516408520.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:20.723Z,1516408520.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:21.090Z,1516408521.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:21.104Z,1516408521.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:21.500Z,1516408521.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:21.526Z,1516408521.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:21.888Z,1516408521.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:21.901Z,1516408521.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:22.282Z,1516408522.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:22.296Z,1516408522.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:22.694Z,1516408522.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:22.708Z,1516408522.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:23.100Z,1516408523.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:23.135Z,1516408523.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:23.486Z,1516408523.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:23.501Z,1516408523.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:23.888Z,1516408523.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:23.902Z,1516408523.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:24.288Z,1516408524.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:24.302Z,1516408524.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:24.686Z,1516408524.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:24.724Z,1516408524.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:25.099Z,1516408525.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:25.106Z,1516408525.106 [PNI_TCM](ERROR): CRC does not match. Expected:0x39821 got:0x4888
2018-01-20T00:35:25.138Z,1516408525.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:25.499Z,1516408525.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:25.531Z,1516408525.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:25.889Z,1516408525.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:25.907Z,1516408525.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:26.284Z,1516408526.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:26.329Z,1516408526.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:26.688Z,1516408526.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:26.704Z,1516408526.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:27.090Z,1516408527.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:27.111Z,1516408527.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:27.493Z,1516408527.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:27.507Z,1516408527.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:27.888Z,1516408527.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:27.929Z,1516408527.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:28.274Z,1516408528.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:28.299Z,1516408528.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:28.695Z,1516408528.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:28.715Z,1516408528.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:29.097Z,1516408529.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:29.111Z,1516408529.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:29.489Z,1516408529.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:29.527Z,1516408529.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:29.882Z,1516408529.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:29.905Z,1516408529.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:30.291Z,1516408530.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:30.305Z,1516408530.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:30.692Z,1516408530.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:30.715Z,1516408530.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:31.096Z,1516408531.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:31.138Z,1516408531.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:31.495Z,1516408531.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:31.504Z,1516408531.504 [PNI_TCM](ERROR): CRC does not match. Expected:0x49156 got:0x44568
2018-01-20T00:35:31.542Z,1516408531.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:31.887Z,1516408531.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:31.903Z,1516408531.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:32.290Z,1516408532.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:32.304Z,1516408532.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:32.695Z,1516408532.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:32.733Z,1516408532.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:33.094Z,1516408533.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:33.111Z,1516408533.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:33.499Z,1516408533.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:33.519Z,1516408533.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:33.893Z,1516408533.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:33.907Z,1516408533.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:34.271Z,1516408534.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:34.314Z,1516408534.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:34.697Z,1516408534.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:34.715Z,1516408534.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:35.100Z,1516408535.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:35.114Z,1516408535.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:35.500Z,1516408535.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:35.519Z,1516408535.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:35.888Z,1516408535.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:35.934Z,1516408535.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:36.278Z,1516408536.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:36.306Z,1516408536.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:36.700Z,1516408536.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:36.719Z,1516408536.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:37.104Z,1516408537.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:37.118Z,1516408537.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:37.494Z,1516408537.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:37.527Z,1516408537.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:37.887Z,1516408537.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:37.902Z,1516408537.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:38.297Z,1516408538.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:38.313Z,1516408538.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:38.699Z,1516408538.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:38.727Z,1516408538.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:39.103Z,1516408539.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:39.146Z,1516408539.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:39.494Z,1516408539.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:39.516Z,1516408539.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:39.878Z,1516408539.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:39.911Z,1516408539.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:40.281Z,1516408540.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:40.311Z,1516408540.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:40.687Z,1516408540.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:40.729Z,1516408540.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:41.106Z,1516408541.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:41.124Z,1516408541.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:41.499Z,1516408541.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:41.524Z,1516408541.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:41.885Z,1516408541.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:41.913Z,1516408541.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:42.284Z,1516408542.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:42.310Z,1516408542.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:42.698Z,1516408542.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:42.727Z,1516408542.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:43.094Z,1516408543.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:43.131Z,1516408543.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:43.490Z,1516408543.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:43.523Z,1516408543.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:43.875Z,1516408543.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:43.924Z,1516408543.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:44.282Z,1516408544.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:44.296Z,1516408544.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:44.676Z,1516408544.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:44.690Z,1516408544.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:45.095Z,1516408545.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:45.123Z,1516408545.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:45.498Z,1516408545.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:45.535Z,1516408545.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:45.886Z,1516408545.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:45.930Z,1516408545.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:46.284Z,1516408546.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:46.298Z,1516408546.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:46.685Z,1516408546.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:46.703Z,1516408546.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:47.086Z,1516408547.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:47.099Z,1516408547.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:47.485Z,1516408547.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:47.500Z,1516408547.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:47.887Z,1516408547.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:47.901Z,1516408547.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:48.300Z,1516408548.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:48.334Z,1516408548.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:48.684Z,1516408548.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:48.725Z,1516408548.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:49.082Z,1516408549.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:49.097Z,1516408549.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:49.480Z,1516408549.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:49.493Z,1516408549.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:49.887Z,1516408549.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:49.919Z,1516408549.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:50.294Z,1516408550.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:50.309Z,1516408550.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:50.694Z,1516408550.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:50.715Z,1516408550.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:53.775Z,1516408553.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:53.790Z,1516408553.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:53.890Z,1516408553.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:53.938Z,1516408553.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:54.246Z,1516408554.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:54.260Z,1516408554.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:54.658Z,1516408554.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:54.690Z,1516408554.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:55.044Z,1516408555.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:55.063Z,1516408555.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:55.444Z,1516408555.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:55.459Z,1516408555.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:55.844Z,1516408555.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:55.858Z,1516408555.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:56.245Z,1516408556.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:56.260Z,1516408556.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:56.641Z,1516408556.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:56.668Z,1516408556.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:57.050Z,1516408557.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:57.064Z,1516408557.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:57.454Z,1516408557.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:57.468Z,1516408557.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:57.850Z,1516408557.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:57.864Z,1516408557.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:58.248Z,1516408558.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:58.262Z,1516408558.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:58.641Z,1516408558.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:58.655Z,1516408558.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:59.040Z,1516408559.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:59.066Z,1516408559.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:59.444Z,1516408559.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:59.458Z,1516408559.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:35:59.849Z,1516408559.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:35:59.864Z,1516408559.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:00.254Z,1516408560.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:00.268Z,1516408560.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:00.654Z,1516408560.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:00.674Z,1516408560.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:01.029Z,1516408561.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:01.062Z,1516408561.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:01.448Z,1516408561.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:01.462Z,1516408561.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:01.843Z,1516408561.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:01.863Z,1516408561.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:02.250Z,1516408562.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:02.264Z,1516408562.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:02.652Z,1516408562.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:02.671Z,1516408562.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:03.054Z,1516408563.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:03.068Z,1516408563.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:03.440Z,1516408563.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:03.454Z,1516408563.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:03.851Z,1516408563.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:03.871Z,1516408563.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:04.249Z,1516408564.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:04.264Z,1516408564.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:04.640Z,1516408564.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:04.658Z,1516408564.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:05.053Z,1516408565.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:05.067Z,1516408565.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:05.454Z,1516408565.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:05.468Z,1516408565.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:05.853Z,1516408565.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:05.867Z,1516408565.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:06.247Z,1516408566.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:06.267Z,1516408566.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:06.648Z,1516408566.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:06.667Z,1516408566.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:07.046Z,1516408567.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:07.067Z,1516408567.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:07.448Z,1516408567.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:07.462Z,1516408567.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:07.844Z,1516408567.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:07.859Z,1516408567.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:08.253Z,1516408568.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:08.267Z,1516408568.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:08.654Z,1516408568.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:08.668Z,1516408568.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:09.054Z,1516408569.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:09.068Z,1516408569.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:09.447Z,1516408569.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:09.467Z,1516408569.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:09.847Z,1516408569.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:09.867Z,1516408569.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:10.246Z,1516408570.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:10.260Z,1516408570.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:10.648Z,1516408570.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:10.662Z,1516408570.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:11.053Z,1516408571.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:11.067Z,1516408571.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:11.455Z,1516408571.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:11.469Z,1516408571.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:11.854Z,1516408571.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:11.868Z,1516408571.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:12.254Z,1516408572.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:12.268Z,1516408572.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:12.643Z,1516408572.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:12.663Z,1516408572.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:13.049Z,1516408573.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:13.063Z,1516408573.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:13.447Z,1516408573.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:13.461Z,1516408573.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:13.840Z,1516408573.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:13.873Z,1516408573.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:14.255Z,1516408574.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:14.269Z,1516408574.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:14.655Z,1516408574.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:14.669Z,1516408574.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:15.052Z,1516408575.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:15.067Z,1516408575.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:15.434Z,1516408575.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:15.461Z,1516408575.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:15.835Z,1516408575.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:15.868Z,1516408575.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:16.232Z,1516408576.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:16.260Z,1516408576.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:16.631Z,1516408576.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:16.671Z,1516408576.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:17.059Z,1516408577.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:17.074Z,1516408577.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:17.453Z,1516408577.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:17.482Z,1516408577.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:17.850Z,1516408577.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:17.864Z,1516408577.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:18.235Z,1516408578.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:18.266Z,1516408578.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:18.630Z,1516408578.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:18.663Z,1516408578.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:19.035Z,1516408579.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:19.066Z,1516408579.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:19.440Z,1516408579.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:19.466Z,1516408579.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:19.831Z,1516408579.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:19.868Z,1516408579.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:20.255Z,1516408580.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:20.269Z,1516408580.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:20.666Z,1516408580.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:20.680Z,1516408580.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:21.063Z,1516408581.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:21.077Z,1516408581.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:21.440Z,1516408581.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:21.465Z,1516408581.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:21.836Z,1516408581.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:21.867Z,1516408581.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:22.232Z,1516408582.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:22.268Z,1516408582.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:22.639Z,1516408582.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:22.671Z,1516408582.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:23.055Z,1516408583.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:23.069Z,1516408583.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:23.456Z,1516408583.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:23.482Z,1516408583.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:23.858Z,1516408583.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:23.879Z,1516408583.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:24.239Z,1516408584.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:24.271Z,1516408584.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:24.631Z,1516408584.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:24.664Z,1516408584.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:25.039Z,1516408585.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:25.071Z,1516408585.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:25.436Z,1516408585.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:25.463Z,1516408585.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:25.839Z,1516408585.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:25.865Z,1516408585.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:26.258Z,1516408586.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:26.272Z,1516408586.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:26.656Z,1516408586.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:26.675Z,1516408586.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:27.059Z,1516408587.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:27.072Z,1516408587.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:27.439Z,1516408587.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:27.464Z,1516408587.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:27.835Z,1516408587.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:27.866Z,1516408587.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:28.232Z,1516408588.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:28.267Z,1516408588.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:28.639Z,1516408588.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:28.664Z,1516408588.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:29.054Z,1516408589.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:29.068Z,1516408589.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:29.454Z,1516408589.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:29.476Z,1516408589.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:29.857Z,1516408589.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:29.871Z,1516408589.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:30.235Z,1516408590.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:30.266Z,1516408590.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:30.631Z,1516408590.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:30.667Z,1516408590.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:31.039Z,1516408591.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:31.064Z,1516408591.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:31.436Z,1516408591.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:31.466Z,1516408591.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:31.831Z,1516408591.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:31.867Z,1516408591.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:32.242Z,1516408592.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:32.274Z,1516408592.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:32.658Z,1516408592.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:32.672Z,1516408592.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:33.041Z,1516408593.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:33.067Z,1516408593.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:33.439Z,1516408593.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:33.465Z,1516408593.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:33.835Z,1516408593.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:33.865Z,1516408593.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:34.240Z,1516408594.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:34.271Z,1516408594.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:34.639Z,1516408594.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:34.670Z,1516408594.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:35.046Z,1516408595.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:35.071Z,1516408595.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:35.446Z,1516408595.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:35.472Z,1516408595.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:35.846Z,1516408595.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:35.871Z,1516408595.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:36.234Z,1516408596.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:36.270Z,1516408596.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:36.639Z,1516408596.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:36.672Z,1516408596.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:37.037Z,1516408597.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:37.067Z,1516408597.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:37.440Z,1516408597.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:37.470Z,1516408597.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:37.840Z,1516408597.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:37.854Z,1516408597.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:38.254Z,1516408598.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:38.283Z,1516408598.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:38.654Z,1516408598.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:38.683Z,1516408598.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:39.054Z,1516408599.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:39.078Z,1516408599.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:39.436Z,1516408599.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:39.451Z,1516408599.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:39.840Z,1516408599.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:39.875Z,1516408599.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:40.237Z,1516408600.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:40.250Z,1516408600.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:40.640Z,1516408600.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:40.659Z,1516408600.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:41.054Z,1516408601.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:41.086Z,1516408601.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:41.450Z,1516408601.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:41.464Z,1516408601.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:41.858Z,1516408601.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:41.879Z,1516408601.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:42.240Z,1516408602.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:42.279Z,1516408602.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:42.643Z,1516408602.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:42.656Z,1516408602.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:43.040Z,1516408603.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:43.059Z,1516408603.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:43.445Z,1516408603.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:43.459Z,1516408603.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:43.844Z,1516408603.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:43.858Z,1516408603.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:44.258Z,1516408604.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:44.279Z,1516408604.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:44.654Z,1516408604.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:44.681Z,1516408604.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:45.053Z,1516408605.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:45.083Z,1516408605.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:45.440Z,1516408605.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:45.462Z,1516408605.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:45.840Z,1516408605.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:45.858Z,1516408605.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:46.240Z,1516408606.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:46.254Z,1516408606.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:46.645Z,1516408606.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:46.659Z,1516408606.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:47.058Z,1516408607.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:47.088Z,1516408607.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:47.446Z,1516408607.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:47.459Z,1516408607.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:47.850Z,1516408607.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:47.864Z,1516408607.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:48.245Z,1516408608.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:48.267Z,1516408608.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:48.645Z,1516408608.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:48.659Z,1516408608.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:49.045Z,1516408609.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:49.067Z,1516408609.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:49.444Z,1516408609.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:49.458Z,1516408609.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:49.841Z,1516408609.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:49.855Z,1516408609.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:50.250Z,1516408610.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:50.264Z,1516408610.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:50.658Z,1516408610.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:50.672Z,1516408610.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:51.051Z,1516408611.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:51.065Z,1516408611.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:54.150Z,1516408614.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:54.171Z,1516408614.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:54.264Z,1516408614.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:54.304Z,1516408614.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:54.658Z,1516408614.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:54.675Z,1516408614.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:55.058Z,1516408615.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:55.074Z,1516408615.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:55.458Z,1516408615.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:55.473Z,1516408615.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:55.851Z,1516408615.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:55.864Z,1516408615.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:56.249Z,1516408616.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:56.263Z,1516408616.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:56.655Z,1516408616.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:56.670Z,1516408616.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:57.058Z,1516408617.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:57.072Z,1516408617.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:57.457Z,1516408617.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:57.472Z,1516408617.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:57.857Z,1516408617.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:57.871Z,1516408617.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:58.255Z,1516408618.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:58.268Z,1516408618.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:58.646Z,1516408618.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:58.660Z,1516408618.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:59.047Z,1516408619.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:59.078Z,1516408619.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:59.455Z,1516408619.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:59.468Z,1516408619.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:36:59.858Z,1516408619.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:36:59.872Z,1516408619.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:00.258Z,1516408620.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:00.275Z,1516408620.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:00.658Z,1516408620.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:00.675Z,1516408620.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:01.045Z,1516408621.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:01.060Z,1516408621.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:01.457Z,1516408621.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:01.476Z,1516408621.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:01.855Z,1516408621.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:01.868Z,1516408621.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:02.257Z,1516408622.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:02.272Z,1516408622.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:02.662Z,1516408622.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:02.676Z,1516408622.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:03.058Z,1516408623.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:03.075Z,1516408623.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:03.445Z,1516408623.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:03.460Z,1516408623.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:03.851Z,1516408623.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:03.865Z,1516408623.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:04.255Z,1516408624.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:04.268Z,1516408624.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:04.645Z,1516408624.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:04.659Z,1516408624.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:05.056Z,1516408625.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:05.075Z,1516408625.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:05.462Z,1516408625.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:05.476Z,1516408625.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:05.857Z,1516408625.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:05.871Z,1516408625.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:06.251Z,1516408626.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:06.265Z,1516408626.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:06.654Z,1516408626.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:06.668Z,1516408626.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:07.049Z,1516408627.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:07.063Z,1516408627.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:07.455Z,1516408627.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:07.475Z,1516408627.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:07.851Z,1516408627.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:07.871Z,1516408627.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:08.257Z,1516408628.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:08.272Z,1516408628.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:08.662Z,1516408628.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:08.676Z,1516408628.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:09.058Z,1516408629.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:09.075Z,1516408629.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:09.445Z,1516408629.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:09.459Z,1516408629.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:09.851Z,1516408629.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:09.865Z,1516408629.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:10.255Z,1516408630.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:10.268Z,1516408630.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:10.645Z,1516408630.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:10.659Z,1516408630.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:11.056Z,1516408631.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:11.075Z,1516408631.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:11.462Z,1516408631.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:11.476Z,1516408631.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:11.858Z,1516408631.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:11.875Z,1516408631.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:12.255Z,1516408632.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:12.269Z,1516408632.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:12.655Z,1516408632.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:12.669Z,1516408632.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:13.045Z,1516408633.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:13.059Z,1516408633.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:13.447Z,1516408633.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:13.478Z,1516408633.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:13.855Z,1516408633.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:13.868Z,1516408633.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:14.262Z,1516408634.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:14.276Z,1516408634.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:14.662Z,1516408634.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:14.676Z,1516408634.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:15.061Z,1516408635.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:15.075Z,1516408635.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:15.449Z,1516408635.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:15.464Z,1516408635.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:15.851Z,1516408635.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:15.865Z,1516408635.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:16.248Z,1516408636.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:16.266Z,1516408636.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:16.649Z,1516408636.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:16.663Z,1516408636.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:17.056Z,1516408637.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:17.075Z,1516408637.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:17.464Z,1516408637.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:17.478Z,1516408637.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:17.862Z,1516408637.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:17.876Z,1516408637.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:18.246Z,1516408638.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:18.268Z,1516408638.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:18.651Z,1516408638.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:18.664Z,1516408638.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:19.037Z,1516408639.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:19.071Z,1516408639.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:19.452Z,1516408639.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:19.466Z,1516408639.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:19.839Z,1516408639.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:19.873Z,1516408639.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:20.258Z,1516408640.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:20.273Z,1516408640.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:20.666Z,1516408640.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:20.687Z,1516408640.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:21.065Z,1516408641.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:21.079Z,1516408641.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:21.455Z,1516408641.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:21.470Z,1516408641.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:21.851Z,1516408641.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:21.871Z,1516408641.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:22.252Z,1516408642.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:22.266Z,1516408642.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:22.649Z,1516408642.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:22.667Z,1516408642.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:23.061Z,1516408643.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:23.076Z,1516408643.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:23.464Z,1516408643.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:23.478Z,1516408643.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:23.862Z,1516408643.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:23.876Z,1516408643.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:24.246Z,1516408644.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:24.268Z,1516408644.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:24.651Z,1516408644.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:24.671Z,1516408644.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:24.671Z,1516408644.671 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-01-20T00:37:24.671Z,1516408644.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:37:24.673Z,1516408644.673 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:24.673Z,1516408644.673 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-01-20T00:37:24.673Z,1516408644.673 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:37:24.674Z,1516408644.674 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:24.675Z,1516408644.675 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 69
2018-01-20T00:37:24.675Z,1516408644.675 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:37:24.686Z,1516408644.686 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:37:24.686Z,1516408644.686 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:37:24.687Z,1516408644.687 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:37:25.038Z,1516408645.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:25.083Z,1516408645.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:37:25.083Z,1516408645.083 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-01-20T00:37:25.084Z,1516408645.084 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:37:25.084Z,1516408645.084 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-01-20T00:37:25.084Z,1516408645.084 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:37:25.084Z,1516408645.084 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 69
2018-01-20T00:37:25.444Z,1516408645.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:25.473Z,1516408645.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:37:25.474Z,1516408645.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:37:25.474Z,1516408645.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:37:25.474Z,1516408645.474 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:37:25.475Z,1516408645.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:37:25.475Z,1516408645.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:37:25.475Z,1516408645.475 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:37:25.476Z,1516408645.476 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:37:25.476Z,1516408645.476 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:37:25.839Z,1516408645.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:25.864Z,1516408645.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:37:25.865Z,1516408645.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:26.257Z,1516408646.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:26.279Z,1516408646.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:37:26.280Z,1516408646.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:26.667Z,1516408646.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:26.686Z,1516408646.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:37:26.687Z,1516408646.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:27.060Z,1516408647.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:27.084Z,1516408647.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:37:27.085Z,1516408647.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:27.456Z,1516408647.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:27.470Z,1516408647.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:37:27.471Z,1516408647.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:27.843Z,1516408647.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:27.874Z,1516408647.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:37:27.875Z,1516408647.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:28.256Z,1516408648.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:28.269Z,1516408648.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:37:28.270Z,1516408648.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:28.641Z,1516408648.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:28.667Z,1516408648.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:37:28.668Z,1516408648.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:29.066Z,1516408649.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:29.086Z,1516408649.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:37:29.087Z,1516408649.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:29.466Z,1516408649.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:29.479Z,1516408649.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:37:29.480Z,1516408649.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:29.863Z,1516408649.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:29.877Z,1516408649.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:37:29.878Z,1516408649.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:30.244Z,1516408650.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:30.275Z,1516408650.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:37:30.276Z,1516408650.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:30.644Z,1516408650.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:30.674Z,1516408650.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:37:30.675Z,1516408650.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:31.042Z,1516408651.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:31.063Z,1516408651.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:37:31.064Z,1516408651.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:31.446Z,1516408651.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:31.475Z,1516408651.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:37:31.476Z,1516408651.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:31.849Z,1516408651.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:31.885Z,1516408651.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:37:31.886Z,1516408651.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:32.230Z,1516408652.230 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T00:37:32.230Z,1516408652.230 [NAL9602] Data Fault, FailCount= 4
2018-01-20T00:37:32.230Z,1516408652.230 [NAL9602](ERROR): Data Fault
2018-01-20T00:37:32.249Z,1516408652.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:32.287Z,1516408652.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:37:32.288Z,1516408652.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:32.317Z,1516408652.317 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T00:37:32.634Z,1516408652.634 [NAL9602](INFO): Powering down
2018-01-20T00:37:32.654Z,1516408652.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:32.683Z,1516408652.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:37:32.684Z,1516408652.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:33.052Z,1516408653.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:33.066Z,1516408653.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:37:33.066Z,1516408653.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:33.444Z,1516408653.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:33.459Z,1516408653.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:37:33.460Z,1516408653.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:33.493Z,1516408653.493 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T00:37:33.493Z,1516408653.493 [NAL9602] No Fault, FailCount= 4
2018-01-20T00:37:33.848Z,1516408653.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:33.863Z,1516408653.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:37:33.864Z,1516408653.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:34.247Z,1516408654.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:34.261Z,1516408654.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:37:34.262Z,1516408654.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:34.647Z,1516408654.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:34.662Z,1516408654.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:37:34.662Z,1516408654.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:35.047Z,1516408655.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:35.060Z,1516408655.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:37:35.061Z,1516408655.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:35.447Z,1516408655.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:35.460Z,1516408655.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:37:35.461Z,1516408655.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:35.848Z,1516408655.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:35.862Z,1516408655.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:37:35.863Z,1516408655.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:36.253Z,1516408656.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:36.266Z,1516408656.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:37:36.267Z,1516408656.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:36.648Z,1516408656.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:36.661Z,1516408656.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:37:36.662Z,1516408656.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:37.048Z,1516408657.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:37.062Z,1516408657.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:37:37.063Z,1516408657.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:37.452Z,1516408657.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:37.466Z,1516408657.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T00:37:37.466Z,1516408657.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:37.853Z,1516408657.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:37.866Z,1516408657.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:37:37.867Z,1516408657.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:38.246Z,1516408658.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:38.261Z,1516408658.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:37:38.262Z,1516408658.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:38.649Z,1516408658.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:38.667Z,1516408658.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:37:38.668Z,1516408658.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:39.047Z,1516408659.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:39.061Z,1516408659.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:37:39.062Z,1516408659.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:39.446Z,1516408659.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:39.460Z,1516408659.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:37:39.462Z,1516408659.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:39.853Z,1516408659.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:39.868Z,1516408659.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:37:39.869Z,1516408659.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:40.248Z,1516408660.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:40.262Z,1516408660.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:37:40.262Z,1516408660.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:40.646Z,1516408660.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:40.660Z,1516408660.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:37:40.661Z,1516408660.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:41.049Z,1516408661.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:41.063Z,1516408661.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:37:41.063Z,1516408661.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:41.454Z,1516408661.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:41.467Z,1516408661.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:37:41.468Z,1516408661.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:41.849Z,1516408661.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:41.862Z,1516408661.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:37:41.863Z,1516408661.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:42.253Z,1516408662.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:42.267Z,1516408662.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:37:42.268Z,1516408662.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:42.654Z,1516408662.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:42.667Z,1516408662.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:37:42.668Z,1516408662.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:43.048Z,1516408663.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:43.062Z,1516408663.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:37:43.063Z,1516408663.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:43.449Z,1516408663.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:43.474Z,1516408663.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:37:43.475Z,1516408663.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:43.854Z,1516408663.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:43.867Z,1516408663.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:37:43.868Z,1516408663.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:44.248Z,1516408664.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:44.262Z,1516408664.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:37:44.263Z,1516408664.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:44.646Z,1516408664.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:44.660Z,1516408664.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T00:37:44.660Z,1516408664.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:45.046Z,1516408665.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:45.060Z,1516408665.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:45.448Z,1516408665.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:45.462Z,1516408665.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:45.850Z,1516408665.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:45.864Z,1516408665.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:46.247Z,1516408666.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:46.260Z,1516408666.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:46.648Z,1516408666.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:46.662Z,1516408666.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:47.050Z,1516408667.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:47.064Z,1516408667.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:47.454Z,1516408667.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:47.467Z,1516408667.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:47.844Z,1516408667.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:47.858Z,1516408667.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:48.254Z,1516408668.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:48.267Z,1516408668.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:48.648Z,1516408668.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:48.662Z,1516408668.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:49.047Z,1516408669.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:49.061Z,1516408669.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:49.453Z,1516408669.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:49.467Z,1516408669.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:49.848Z,1516408669.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:49.862Z,1516408669.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:50.247Z,1516408670.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:50.261Z,1516408670.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:50.650Z,1516408670.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:50.664Z,1516408670.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:51.055Z,1516408671.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:51.068Z,1516408671.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:54.149Z,1516408674.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:54.164Z,1516408674.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:54.267Z,1516408674.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:54.303Z,1516408674.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:54.615Z,1516408674.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:54.629Z,1516408674.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:55.019Z,1516408675.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:55.033Z,1516408675.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:55.408Z,1516408675.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:55.422Z,1516408675.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:55.816Z,1516408675.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:55.831Z,1516408675.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:56.219Z,1516408676.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:56.233Z,1516408676.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:56.608Z,1516408676.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:56.622Z,1516408676.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:57.016Z,1516408677.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:57.030Z,1516408677.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:57.419Z,1516408677.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:57.432Z,1516408677.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:57.807Z,1516408677.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:57.822Z,1516408677.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:58.219Z,1516408678.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:58.233Z,1516408678.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:58.619Z,1516408678.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:58.632Z,1516408678.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:59.011Z,1516408679.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:59.025Z,1516408679.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:59.423Z,1516408679.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:59.437Z,1516408679.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:37:59.820Z,1516408679.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:37:59.833Z,1516408679.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:00.216Z,1516408680.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:00.230Z,1516408680.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:00.616Z,1516408680.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:00.639Z,1516408680.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:01.020Z,1516408681.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:01.034Z,1516408681.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:01.420Z,1516408681.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:01.434Z,1516408681.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:01.817Z,1516408681.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:01.835Z,1516408681.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:02.220Z,1516408682.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:02.234Z,1516408682.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:02.616Z,1516408682.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:02.631Z,1516408682.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:02.994Z,1516408682.994 [NAL9602](INFO): Powering up NAL9602
2018-01-20T00:38:03.019Z,1516408683.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:03.045Z,1516408683.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:03.422Z,1516408683.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:03.436Z,1516408683.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:03.830Z,1516408683.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:03.849Z,1516408683.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:04.219Z,1516408684.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:04.233Z,1516408684.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:04.620Z,1516408684.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:04.634Z,1516408684.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:05.016Z,1516408685.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:05.042Z,1516408685.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:05.424Z,1516408685.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:05.438Z,1516408685.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:05.819Z,1516408685.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:05.834Z,1516408685.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:06.220Z,1516408686.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:06.235Z,1516408686.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:06.618Z,1516408686.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:06.646Z,1516408686.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:07.024Z,1516408687.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:07.038Z,1516408687.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:07.425Z,1516408687.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:07.439Z,1516408687.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:07.823Z,1516408687.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:07.838Z,1516408687.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:08.219Z,1516408688.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:08.233Z,1516408688.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:08.616Z,1516408688.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:08.631Z,1516408688.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:09.019Z,1516408689.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:09.033Z,1516408689.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:09.419Z,1516408689.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:09.433Z,1516408689.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:09.816Z,1516408689.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:09.831Z,1516408689.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:10.213Z,1516408690.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:10.261Z,1516408690.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:10.623Z,1516408690.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:10.637Z,1516408690.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:11.013Z,1516408691.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:11.035Z,1516408691.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:11.411Z,1516408691.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:11.436Z,1516408691.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:11.812Z,1516408691.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:11.846Z,1516408691.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:12.224Z,1516408692.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:12.238Z,1516408692.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:12.612Z,1516408692.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:12.642Z,1516408692.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:13.012Z,1516408693.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:13.037Z,1516408693.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:13.424Z,1516408693.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:13.438Z,1516408693.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:13.831Z,1516408693.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:13.845Z,1516408693.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:14.198Z,1516408694.198 [NAL9602](INFO): NAL9602 initialized
2018-01-20T00:38:14.228Z,1516408694.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:14.242Z,1516408694.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:14.609Z,1516408694.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:14.635Z,1516408694.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:15.031Z,1516408695.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:15.045Z,1516408695.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:15.434Z,1516408695.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:15.448Z,1516408695.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:15.829Z,1516408695.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:15.844Z,1516408695.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:16.211Z,1516408696.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:16.236Z,1516408696.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:16.612Z,1516408696.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:16.634Z,1516408696.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:17.009Z,1516408697.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:17.031Z,1516408697.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:17.434Z,1516408697.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:17.448Z,1516408697.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:17.834Z,1516408697.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:17.854Z,1516408697.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:18.235Z,1516408698.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:18.249Z,1516408698.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:18.612Z,1516408698.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:18.642Z,1516408698.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:19.015Z,1516408699.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:19.053Z,1516408699.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:19.422Z,1516408699.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:19.448Z,1516408699.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:19.826Z,1516408699.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:19.859Z,1516408699.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:20.222Z,1516408700.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:20.254Z,1516408700.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:20.610Z,1516408700.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:20.624Z,1516408700.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:21.015Z,1516408701.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:21.051Z,1516408701.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:21.426Z,1516408701.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:21.458Z,1516408701.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:21.822Z,1516408701.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:21.836Z,1516408701.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:22.230Z,1516408702.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:22.262Z,1516408702.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:22.620Z,1516408702.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:22.634Z,1516408702.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:23.015Z,1516408703.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:23.030Z,1516408703.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:23.430Z,1516408703.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:23.460Z,1516408703.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:23.830Z,1516408703.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:23.844Z,1516408703.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:24.222Z,1516408704.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:24.243Z,1516408704.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:24.621Z,1516408704.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:24.643Z,1516408704.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:25.020Z,1516408705.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:25.034Z,1516408705.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:25.434Z,1516408705.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:25.464Z,1516408705.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:25.834Z,1516408705.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:25.864Z,1516408705.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:26.234Z,1516408706.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:26.266Z,1516408706.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:26.608Z,1516408706.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:26.626Z,1516408706.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:27.023Z,1516408707.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:27.043Z,1516408707.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:27.422Z,1516408707.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:27.436Z,1516408707.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:27.825Z,1516408707.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:27.840Z,1516408707.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:28.228Z,1516408708.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:28.247Z,1516408708.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:28.629Z,1516408708.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:28.643Z,1516408708.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:29.015Z,1516408709.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:29.030Z,1516408709.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:29.414Z,1516408709.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:29.440Z,1516408709.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:29.824Z,1516408709.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:29.838Z,1516408709.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:30.223Z,1516408710.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:30.238Z,1516408710.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:30.630Z,1516408710.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:30.644Z,1516408710.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:31.033Z,1516408711.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:31.054Z,1516408711.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:31.433Z,1516408711.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:31.447Z,1516408711.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:31.823Z,1516408711.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:31.843Z,1516408711.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:32.221Z,1516408712.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:32.236Z,1516408712.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:32.621Z,1516408712.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:32.635Z,1516408712.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:33.029Z,1516408713.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:33.043Z,1516408713.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:33.432Z,1516408713.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:33.447Z,1516408713.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:33.830Z,1516408713.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:33.844Z,1516408713.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:34.224Z,1516408714.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:34.238Z,1516408714.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:34.614Z,1516408714.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:34.644Z,1516408714.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:35.034Z,1516408715.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:35.048Z,1516408715.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:35.432Z,1516408715.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:35.451Z,1516408715.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:35.834Z,1516408715.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:35.848Z,1516408715.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:36.221Z,1516408716.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:36.235Z,1516408716.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:36.614Z,1516408716.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:36.635Z,1516408716.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:37.033Z,1516408717.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:37.047Z,1516408717.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:37.433Z,1516408717.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:37.447Z,1516408717.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:37.829Z,1516408717.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:37.843Z,1516408717.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:38.218Z,1516408718.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:38.238Z,1516408718.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:38.622Z,1516408718.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:38.636Z,1516408718.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:39.032Z,1516408719.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:39.051Z,1516408719.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:39.433Z,1516408719.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:39.451Z,1516408719.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:39.830Z,1516408719.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:39.845Z,1516408719.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:40.227Z,1516408720.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:40.241Z,1516408720.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:40.628Z,1516408720.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:40.642Z,1516408720.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:41.031Z,1516408721.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:41.051Z,1516408721.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:41.433Z,1516408721.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:41.447Z,1516408721.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:41.834Z,1516408721.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:41.855Z,1516408721.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:42.226Z,1516408722.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:42.240Z,1516408722.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:42.620Z,1516408722.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:42.638Z,1516408722.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:43.030Z,1516408723.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:43.044Z,1516408723.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:43.434Z,1516408723.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:43.448Z,1516408723.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:43.834Z,1516408723.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:43.848Z,1516408723.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:44.226Z,1516408724.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:44.241Z,1516408724.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:44.622Z,1516408724.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:44.636Z,1516408724.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:45.030Z,1516408725.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:45.058Z,1516408725.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:45.435Z,1516408725.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:45.449Z,1516408725.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:45.832Z,1516408725.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:45.847Z,1516408725.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:46.218Z,1516408726.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:46.242Z,1516408726.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:46.626Z,1516408726.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:46.640Z,1516408726.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:47.026Z,1516408727.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:47.051Z,1516408727.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:47.438Z,1516408727.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:47.459Z,1516408727.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:47.834Z,1516408727.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:47.850Z,1516408727.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:48.228Z,1516408728.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:48.243Z,1516408728.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:48.613Z,1516408728.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:48.647Z,1516408728.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:49.034Z,1516408729.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:49.048Z,1516408729.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:49.435Z,1516408729.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:49.449Z,1516408729.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:49.832Z,1516408729.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:49.847Z,1516408729.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:50.214Z,1516408730.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:50.240Z,1516408730.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:50.243Z,1516408730.243 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T00:38:50.243Z,1516408730.243 [Default:CheckIn:C.Wait] Stopped
2018-01-20T00:38:50.243Z,1516408730.243 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T00:38:50.243Z,1516408730.243 [Default:CheckIn:D] Running Loop=1
2018-01-20T00:38:50.614Z,1516408730.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:50.640Z,1516408730.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:50.643Z,1516408730.643 [Default:CheckIn:D] Stopped
2018-01-20T00:38:50.643Z,1516408730.643 [Default:CheckIn:E] Running Loop=1
2018-01-20T00:38:51.028Z,1516408731.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:51.042Z,1516408731.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:51.046Z,1516408731.046 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 206.043636 min 
2018-01-20T00:38:51.046Z,1516408731.046 [Default:CheckIn:E] Stopped
2018-01-20T00:38:51.046Z,1516408731.046 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T00:38:51.046Z,1516408731.046 [Default:CheckIn] Stopped
2018-01-20T00:38:51.046Z,1516408731.046 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T00:38:51.047Z,1516408731.047 [Default:CheckIn](INFO): Running loop #21
2018-01-20T00:38:51.047Z,1516408731.047 [Default:CheckIn] Running Loop=21
2018-01-20T00:38:51.047Z,1516408731.047 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T00:38:51.047Z,1516408731.047 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T00:38:51.416Z,1516408731.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:51.448Z,1516408731.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:54.510Z,1516408734.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:54.533Z,1516408734.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:54.655Z,1516408734.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:54.687Z,1516408734.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:54.994Z,1516408734.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:55.032Z,1516408735.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:55.394Z,1516408735.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:55.436Z,1516408735.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:55.777Z,1516408735.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:55.802Z,1516408735.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:56.188Z,1516408736.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:56.207Z,1516408736.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:56.581Z,1516408736.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:56.607Z,1516408736.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:56.993Z,1516408736.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:57.011Z,1516408737.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:57.400Z,1516408737.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:57.435Z,1516408737.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:57.794Z,1516408737.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:57.819Z,1516408737.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:58.192Z,1516408738.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:58.211Z,1516408738.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:58.591Z,1516408738.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:58.608Z,1516408738.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:58.996Z,1516408738.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:59.012Z,1516408739.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:59.398Z,1516408739.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:59.439Z,1516408739.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:38:59.793Z,1516408739.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:38:59.807Z,1516408739.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:00.189Z,1516408740.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:00.203Z,1516408740.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:00.586Z,1516408740.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:00.604Z,1516408740.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:00.994Z,1516408740.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:01.009Z,1516408741.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:01.445Z,1516408741.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:01.470Z,1516408741.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:01.795Z,1516408741.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:01.839Z,1516408741.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:02.190Z,1516408742.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:02.223Z,1516408742.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:02.590Z,1516408742.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:02.652Z,1516408742.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:02.000Z,1516408743.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:03.052Z,1516408743.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:03.403Z,1516408743.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:03.443Z,1516408743.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:03.805Z,1516408743.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:03.853Z,1516408743.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:04.191Z,1516408744.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:04.232Z,1516408744.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:04.591Z,1516408744.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:04.619Z,1516408744.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:04.981Z,1516408744.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:05.051Z,1516408745.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:05.412Z,1516408745.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:05.460Z,1516408745.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:05.804Z,1516408745.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:05.870Z,1516408745.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:06.201Z,1516408746.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:06.223Z,1516408746.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:06.581Z,1516408746.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:06.616Z,1516408746.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:07.004Z,1516408747.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:07.057Z,1516408747.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:07.383Z,1516408747.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:07.441Z,1516408747.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:07.781Z,1516408747.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:07.816Z,1516408747.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:08.192Z,1516408748.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:08.237Z,1516408748.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:08.596Z,1516408748.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:08.632Z,1516408748.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:08.993Z,1516408748.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:09.021Z,1516408749.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:09.389Z,1516408749.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:09.427Z,1516408749.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:09.790Z,1516408749.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:09.837Z,1516408749.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:10.186Z,1516408750.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:10.204Z,1516408750.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:10.590Z,1516408750.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:10.632Z,1516408750.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:10.985Z,1516408750.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:11.032Z,1516408751.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:11.390Z,1516408751.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:11.424Z,1516408751.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:11.804Z,1516408751.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:11.827Z,1516408751.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:12.203Z,1516408752.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:12.223Z,1516408752.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:12.577Z,1516408752.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:12.591Z,1516408752.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:12.979Z,1516408752.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:13.015Z,1516408753.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:13.384Z,1516408753.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:13.399Z,1516408753.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:13.787Z,1516408753.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:13.827Z,1516408753.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:14.198Z,1516408754.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:14.219Z,1516408754.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:14.594Z,1516408754.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:14.624Z,1516408754.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:14.998Z,1516408754.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:15.033Z,1516408755.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:15.058Z,1516408755.058 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T00:39:15.390Z,1516408755.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:15.404Z,1516408755.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:15.787Z,1516408755.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:15.809Z,1516408755.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:16.184Z,1516408756.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:16.198Z,1516408756.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:16.586Z,1516408756.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:16.606Z,1516408756.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:16.992Z,1516408756.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:17.011Z,1516408757.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:17.394Z,1516408757.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:17.408Z,1516408757.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:17.798Z,1516408757.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:17.812Z,1516408757.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:18.195Z,1516408758.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:18.210Z,1516408758.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:18.587Z,1516408758.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:18.613Z,1516408758.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:18.993Z,1516408758.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:19.008Z,1516408759.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:19.381Z,1516408759.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:19.407Z,1516408759.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:19.793Z,1516408759.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:19.807Z,1516408759.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:20.203Z,1516408760.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:20.217Z,1516408760.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:20.600Z,1516408760.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:20.615Z,1516408760.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:20.991Z,1516408760.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:21.018Z,1516408761.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:21.390Z,1516408761.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:21.412Z,1516408761.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:21.775Z,1516408761.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:21.802Z,1516408761.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:22.175Z,1516408762.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:22.200Z,1516408762.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:22.580Z,1516408762.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:22.611Z,1516408762.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:22.975Z,1516408762.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:23.006Z,1516408763.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:23.393Z,1516408763.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:23.411Z,1516408763.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:23.802Z,1516408763.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:23.816Z,1516408763.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:24.203Z,1516408764.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:24.217Z,1516408764.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:24.575Z,1516408764.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:24.607Z,1516408764.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:24.992Z,1516408764.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:25.011Z,1516408765.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:25.397Z,1516408765.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:25.411Z,1516408765.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:25.780Z,1516408765.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:25.806Z,1516408765.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:26.194Z,1516408766.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:26.215Z,1516408766.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:26.598Z,1516408766.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:26.612Z,1516408766.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:27.002Z,1516408767.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:27.016Z,1516408767.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:27.380Z,1516408767.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:27.411Z,1516408767.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:27.775Z,1516408767.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:27.808Z,1516408767.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:28.192Z,1516408768.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:28.211Z,1516408768.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:28.580Z,1516408768.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:28.603Z,1516408768.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:28.983Z,1516408768.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:29.011Z,1516408769.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:29.403Z,1516408769.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:29.423Z,1516408769.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:29.806Z,1516408769.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:29.827Z,1516408769.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:30.203Z,1516408770.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:30.218Z,1516408770.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:30.583Z,1516408770.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:30.608Z,1516408770.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:30.979Z,1516408770.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:31.004Z,1516408771.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:31.378Z,1516408771.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:31.423Z,1516408771.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:31.784Z,1516408771.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:31.814Z,1516408771.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:32.179Z,1516408772.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:32.219Z,1516408772.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:32.594Z,1516408772.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:32.621Z,1516408772.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:32.998Z,1516408772.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:33.023Z,1516408773.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:33.398Z,1516408773.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:33.423Z,1516408773.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:33.779Z,1516408773.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:33.793Z,1516408773.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:34.187Z,1516408774.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:34.227Z,1516408774.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:34.586Z,1516408774.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:34.600Z,1516408774.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:34.987Z,1516408774.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:35.001Z,1516408775.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:35.394Z,1516408775.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:35.424Z,1516408775.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:35.798Z,1516408775.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:35.828Z,1516408775.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:36.202Z,1516408776.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:36.234Z,1516408776.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:36.589Z,1516408776.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:36.603Z,1516408776.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:36.985Z,1516408776.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:37.026Z,1516408777.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:37.388Z,1516408777.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:37.402Z,1516408777.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:37.787Z,1516408777.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:37.859Z,1516408777.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:38.181Z,1516408778.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:38.195Z,1516408778.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:38.590Z,1516408778.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:38.604Z,1516408778.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:38.998Z,1516408778.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:39.012Z,1516408779.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:39.394Z,1516408779.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:39.408Z,1516408779.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:39.777Z,1516408779.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:39.791Z,1516408779.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:40.181Z,1516408780.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:40.195Z,1516408780.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:40.584Z,1516408780.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:40.598Z,1516408780.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:40.983Z,1516408780.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:40.997Z,1516408780.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:41.424Z,1516408781.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:41.447Z,1516408781.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:41.794Z,1516408781.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:41.818Z,1516408781.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:42.197Z,1516408782.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:42.226Z,1516408782.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:42.610Z,1516408782.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:42.642Z,1516408782.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:42.983Z,1516408782.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:43.003Z,1516408783.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:43.383Z,1516408783.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:43.402Z,1516408783.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:43.792Z,1516408783.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:43.817Z,1516408783.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:44.179Z,1516408784.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:44.214Z,1516408784.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:44.603Z,1516408784.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:44.617Z,1516408784.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:45.004Z,1516408785.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:45.019Z,1516408785.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:45.390Z,1516408785.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:45.424Z,1516408785.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:45.783Z,1516408785.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:45.816Z,1516408785.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:46.181Z,1516408786.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:46.215Z,1516408786.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:46.584Z,1516408786.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:46.614Z,1516408786.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:46.983Z,1516408786.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:46.997Z,1516408786.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:47.394Z,1516408787.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:47.419Z,1516408787.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:47.811Z,1516408787.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:47.825Z,1516408787.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:48.198Z,1516408788.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:48.220Z,1516408788.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:48.583Z,1516408788.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:48.598Z,1516408788.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:48.985Z,1516408788.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:48.999Z,1516408788.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:49.386Z,1516408789.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:49.400Z,1516408789.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:49.781Z,1516408789.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:49.799Z,1516408789.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:50.186Z,1516408790.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:50.200Z,1516408790.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:50.598Z,1516408790.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:50.621Z,1516408790.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:50.998Z,1516408790.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:51.019Z,1516408791.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:51.398Z,1516408791.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:51.423Z,1516408791.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:51.780Z,1516408791.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:51.815Z,1516408791.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:54.886Z,1516408794.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:54.901Z,1516408794.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:55.008Z,1516408795.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:55.051Z,1516408795.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:55.398Z,1516408795.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:55.412Z,1516408795.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:55.790Z,1516408795.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:55.804Z,1516408795.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:56.194Z,1516408796.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:56.208Z,1516408796.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:56.590Z,1516408796.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:56.603Z,1516408796.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:56.981Z,1516408796.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:56.000Z,1516408797.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:57.389Z,1516408797.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:57.404Z,1516408797.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:57.790Z,1516408797.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:57.803Z,1516408797.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:58.191Z,1516408798.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:58.206Z,1516408798.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:58.599Z,1516408798.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:58.629Z,1516408798.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:59.003Z,1516408799.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:59.039Z,1516408799.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:59.385Z,1516408799.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:59.399Z,1516408799.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:39:59.789Z,1516408799.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:39:59.812Z,1516408799.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:00.192Z,1516408800.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:00.206Z,1516408800.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:00.586Z,1516408800.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:00.600Z,1516408800.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:00.986Z,1516408800.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:00.000Z,1516408801.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:01.394Z,1516408801.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:01.408Z,1516408801.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:01.788Z,1516408801.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:01.815Z,1516408801.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:02.198Z,1516408802.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:02.212Z,1516408802.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:02.590Z,1516408802.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:02.603Z,1516408802.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:02.978Z,1516408802.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:03.000Z,1516408803.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:03.385Z,1516408803.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:03.406Z,1516408803.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:03.793Z,1516408803.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:03.807Z,1516408803.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:04.196Z,1516408804.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:04.210Z,1516408804.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:04.598Z,1516408804.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:04.612Z,1516408804.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:04.998Z,1516408804.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:05.012Z,1516408805.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:05.391Z,1516408805.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:05.405Z,1516408805.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:05.786Z,1516408805.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:05.807Z,1516408805.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:06.192Z,1516408806.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:06.207Z,1516408806.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:06.582Z,1516408806.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:06.602Z,1516408806.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:06.987Z,1516408806.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:07.002Z,1516408807.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:07.395Z,1516408807.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:07.410Z,1516408807.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:07.795Z,1516408807.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:07.818Z,1516408807.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:08.202Z,1516408808.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:08.216Z,1516408808.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:08.592Z,1516408808.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:08.606Z,1516408808.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:08.985Z,1516408808.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:09.007Z,1516408809.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:09.392Z,1516408809.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:09.407Z,1516408809.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:09.792Z,1516408809.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:09.806Z,1516408809.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:10.202Z,1516408810.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:10.216Z,1516408810.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:10.601Z,1516408810.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:10.623Z,1516408810.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:11.002Z,1516408811.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:11.016Z,1516408811.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:11.391Z,1516408811.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:11.411Z,1516408811.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:11.791Z,1516408811.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:11.811Z,1516408811.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:12.175Z,1516408812.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:12.207Z,1516408812.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:12.592Z,1516408812.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:12.606Z,1516408812.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:12.988Z,1516408812.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:13.007Z,1516408813.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:13.392Z,1516408813.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:13.412Z,1516408813.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:13.790Z,1516408813.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:13.808Z,1516408813.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:14.201Z,1516408814.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:14.215Z,1516408814.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:14.575Z,1516408814.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:14.603Z,1516408814.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:14.977Z,1516408814.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:14.999Z,1516408814.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:15.380Z,1516408815.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:15.410Z,1516408815.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:15.783Z,1516408815.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:15.809Z,1516408815.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:16.201Z,1516408816.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:16.215Z,1516408816.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:16.602Z,1516408816.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:16.616Z,1516408816.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:16.995Z,1516408816.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:17.009Z,1516408817.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:17.379Z,1516408817.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:17.404Z,1516408817.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:17.779Z,1516408817.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:17.804Z,1516408817.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:18.179Z,1516408818.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:18.210Z,1516408818.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:18.584Z,1516408818.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:18.609Z,1516408818.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:18.996Z,1516408818.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:19.015Z,1516408819.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:19.395Z,1516408819.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:19.410Z,1516408819.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:19.794Z,1516408819.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:19.811Z,1516408819.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:20.202Z,1516408820.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:20.216Z,1516408820.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:20.575Z,1516408820.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:20.607Z,1516408820.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:20.977Z,1516408820.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:21.010Z,1516408821.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:21.384Z,1516408821.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:21.409Z,1516408821.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:21.775Z,1516408821.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:21.807Z,1516408821.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:22.202Z,1516408822.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:22.216Z,1516408822.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:22.602Z,1516408822.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:22.616Z,1516408822.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:22.995Z,1516408822.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:23.009Z,1516408823.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:23.383Z,1516408823.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:23.408Z,1516408823.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:23.779Z,1516408823.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:23.804Z,1516408823.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:24.174Z,1516408824.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:24.207Z,1516408824.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:24.584Z,1516408824.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:24.609Z,1516408824.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:24.979Z,1516408824.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:25.015Z,1516408825.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:25.397Z,1516408825.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:25.420Z,1516408825.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:25.796Z,1516408825.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:25.820Z,1516408825.820 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:25.821Z,1516408825.821 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-01-20T00:40:25.821Z,1516408825.821 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:40:25.823Z,1516408825.823 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:25.823Z,1516408825.823 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-01-20T00:40:25.823Z,1516408825.823 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:40:25.824Z,1516408825.824 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:25.824Z,1516408825.824 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 70
2018-01-20T00:40:25.825Z,1516408825.825 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:40:25.845Z,1516408825.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:40:25.845Z,1516408825.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:40:25.845Z,1516408825.845 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:40:26.194Z,1516408826.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:26.225Z,1516408826.225 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:40:26.225Z,1516408826.225 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-01-20T00:40:26.226Z,1516408826.226 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:40:26.226Z,1516408826.226 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-01-20T00:40:26.226Z,1516408826.226 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:40:26.226Z,1516408826.226 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 70
2018-01-20T00:40:26.574Z,1516408826.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:26.610Z,1516408826.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:40:26.611Z,1516408826.611 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:40:26.611Z,1516408826.611 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:40:26.611Z,1516408826.611 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:40:26.612Z,1516408826.612 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:40:26.612Z,1516408826.612 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:40:26.612Z,1516408826.612 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:40:26.613Z,1516408826.613 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:40:26.613Z,1516408826.613 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:40:26.975Z,1516408826.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:27.010Z,1516408827.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:40:27.011Z,1516408827.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:27.380Z,1516408827.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:27.410Z,1516408827.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:40:27.411Z,1516408827.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:27.783Z,1516408827.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:27.815Z,1516408827.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:40:27.816Z,1516408827.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:28.202Z,1516408828.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:28.216Z,1516408828.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:40:28.217Z,1516408828.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:28.602Z,1516408828.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:28.616Z,1516408828.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:40:28.617Z,1516408828.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:28.986Z,1516408828.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:29.019Z,1516408829.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:40:29.020Z,1516408829.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:29.383Z,1516408829.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:29.413Z,1516408829.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:40:29.414Z,1516408829.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:29.779Z,1516408829.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:29.814Z,1516408829.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:40:29.814Z,1516408829.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:30.178Z,1516408830.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:30.191Z,1516408830.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:40:30.192Z,1516408830.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:30.588Z,1516408830.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:30.618Z,1516408830.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:40:30.619Z,1516408830.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:30.986Z,1516408830.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:30.999Z,1516408830.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:40:31.000Z,1516408831.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:31.390Z,1516408831.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:31.403Z,1516408831.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:40:31.404Z,1516408831.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:31.786Z,1516408831.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:31.800Z,1516408831.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:40:31.801Z,1516408831.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:32.198Z,1516408832.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:32.227Z,1516408832.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:40:32.228Z,1516408832.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:32.589Z,1516408832.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:32.603Z,1516408832.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:40:32.604Z,1516408832.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:32.978Z,1516408832.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:33.004Z,1516408833.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:40:33.009Z,1516408833.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:33.390Z,1516408833.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:33.404Z,1516408833.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:40:33.405Z,1516408833.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:33.789Z,1516408833.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:33.802Z,1516408833.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:40:33.803Z,1516408833.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:34.194Z,1516408834.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:34.208Z,1516408834.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:40:34.209Z,1516408834.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:34.602Z,1516408834.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:34.615Z,1516408834.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:40:34.616Z,1516408834.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:34.995Z,1516408834.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:35.008Z,1516408835.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:40:35.009Z,1516408835.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:35.393Z,1516408835.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:35.407Z,1516408835.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:40:35.407Z,1516408835.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:35.789Z,1516408835.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:35.802Z,1516408835.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:40:35.803Z,1516408835.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:36.181Z,1516408836.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:36.211Z,1516408836.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:40:36.212Z,1516408836.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:36.580Z,1516408836.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:36.602Z,1516408836.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:40:36.603Z,1516408836.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:36.991Z,1516408836.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:37.006Z,1516408837.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:40:37.007Z,1516408837.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:37.394Z,1516408837.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:37.408Z,1516408837.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:40:37.409Z,1516408837.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:37.793Z,1516408837.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:37.812Z,1516408837.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:40:37.812Z,1516408837.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:38.194Z,1516408838.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:38.208Z,1516408838.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:40:38.210Z,1516408838.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:38.592Z,1516408838.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:38.606Z,1516408838.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T00:40:38.607Z,1516408838.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:38.986Z,1516408838.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:38.999Z,1516408838.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:40:39.000Z,1516408839.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:39.392Z,1516408839.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:39.406Z,1516408839.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:40:39.407Z,1516408839.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:39.784Z,1516408839.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:39.802Z,1516408839.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:40:39.803Z,1516408839.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:40.194Z,1516408840.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:40.208Z,1516408840.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:40:40.209Z,1516408840.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:40.594Z,1516408840.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:40.607Z,1516408840.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:40:40.608Z,1516408840.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:40.994Z,1516408840.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:41.014Z,1516408841.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:40:41.015Z,1516408841.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:41.386Z,1516408841.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:41.400Z,1516408841.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:40:41.401Z,1516408841.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:41.787Z,1516408841.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:41.802Z,1516408841.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:40:41.802Z,1516408841.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:42.185Z,1516408842.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:42.199Z,1516408842.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:40:42.200Z,1516408842.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:42.583Z,1516408842.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:42.609Z,1516408842.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:40:42.610Z,1516408842.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:42.983Z,1516408842.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:43.009Z,1516408843.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:40:43.010Z,1516408843.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:43.404Z,1516408843.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:43.418Z,1516408843.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:40:43.419Z,1516408843.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:43.794Z,1516408843.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:43.820Z,1516408843.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:40:43.821Z,1516408843.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:44.203Z,1516408844.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:44.216Z,1516408844.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:40:44.218Z,1516408844.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:44.593Z,1516408844.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:44.607Z,1516408844.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:40:44.608Z,1516408844.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:44.977Z,1516408844.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:45.004Z,1516408845.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:40:45.009Z,1516408845.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:45.384Z,1516408845.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:45.409Z,1516408845.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:40:45.410Z,1516408845.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:45.783Z,1516408845.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:45.810Z,1516408845.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T00:40:45.810Z,1516408845.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:46.202Z,1516408846.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:46.220Z,1516408846.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:46.606Z,1516408846.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:46.623Z,1516408846.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:47.002Z,1516408847.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:47.016Z,1516408847.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:47.384Z,1516408847.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:47.409Z,1516408847.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:47.779Z,1516408847.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:47.804Z,1516408847.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:48.195Z,1516408848.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:48.214Z,1516408848.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:48.594Z,1516408848.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:48.611Z,1516408848.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:49.002Z,1516408849.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:49.016Z,1516408849.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:49.375Z,1516408849.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:49.445Z,1516408849.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:49.784Z,1516408849.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:49.809Z,1516408849.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:50.179Z,1516408850.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:50.204Z,1516408850.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:50.595Z,1516408850.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:50.614Z,1516408850.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:50.996Z,1516408850.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:51.015Z,1516408851.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:51.398Z,1516408851.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:51.412Z,1516408851.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:51.775Z,1516408851.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:51.807Z,1516408851.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:52.176Z,1516408852.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:52.206Z,1516408852.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:55.292Z,1516408855.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:55.307Z,1516408855.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:55.415Z,1516408855.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:55.455Z,1516408855.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:55.774Z,1516408855.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:55.806Z,1516408855.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:56.182Z,1516408856.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:56.206Z,1516408856.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:56.570Z,1516408856.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:56.584Z,1516408856.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:56.966Z,1516408856.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:56.980Z,1516408856.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:57.361Z,1516408857.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:57.375Z,1516408857.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:57.761Z,1516408857.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:57.775Z,1516408857.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:58.167Z,1516408858.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:58.198Z,1516408858.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:58.574Z,1516408858.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:58.598Z,1516408858.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:58.970Z,1516408858.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:58.993Z,1516408858.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:59.364Z,1516408859.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:59.394Z,1516408859.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:40:59.759Z,1516408859.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:40:59.773Z,1516408859.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:00.174Z,1516408860.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:00.197Z,1516408860.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:00.578Z,1516408860.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:00.607Z,1516408860.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:00.974Z,1516408860.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:00.999Z,1516408860.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:01.363Z,1516408861.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:01.399Z,1516408861.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:01.764Z,1516408861.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:01.778Z,1516408861.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:02.163Z,1516408862.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:02.177Z,1516408862.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:02.574Z,1516408862.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:02.604Z,1516408862.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:02.982Z,1516408862.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:03.003Z,1516408863.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:03.378Z,1516408863.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:03.409Z,1516408863.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:03.761Z,1516408863.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:03.775Z,1516408863.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:04.160Z,1516408864.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:04.182Z,1516408864.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:04.562Z,1516408864.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:04.576Z,1516408864.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:04.961Z,1516408864.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:04.975Z,1516408864.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:05.378Z,1516408865.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:05.408Z,1516408865.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:05.774Z,1516408865.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:05.787Z,1516408865.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:06.178Z,1516408866.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:06.192Z,1516408866.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:06.567Z,1516408866.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:06.582Z,1516408866.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:06.968Z,1516408866.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:06.982Z,1516408866.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:07.368Z,1516408867.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:07.382Z,1516408867.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:07.762Z,1516408867.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:07.783Z,1516408867.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:08.169Z,1516408868.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:08.183Z,1516408868.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:08.570Z,1516408868.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:08.585Z,1516408868.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:08.974Z,1516408868.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:08.988Z,1516408868.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:09.371Z,1516408869.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:09.384Z,1516408869.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:09.760Z,1516408869.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:09.786Z,1516408869.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:10.171Z,1516408870.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:10.191Z,1516408870.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:10.571Z,1516408870.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:10.585Z,1516408870.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:10.960Z,1516408870.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:10.987Z,1516408870.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:11.380Z,1516408871.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:11.394Z,1516408871.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:11.784Z,1516408871.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:11.798Z,1516408871.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:12.180Z,1516408872.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:12.194Z,1516408872.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:12.555Z,1516408872.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:12.582Z,1516408872.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:12.974Z,1516408872.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:12.989Z,1516408872.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:13.360Z,1516408873.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:13.387Z,1516408873.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:13.756Z,1516408873.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:13.788Z,1516408873.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:14.155Z,1516408874.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:14.189Z,1516408874.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:14.575Z,1516408874.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:14.590Z,1516408874.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:14.982Z,1516408874.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:14.999Z,1516408874.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:15.376Z,1516408875.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:15.406Z,1516408875.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:15.750Z,1516408875.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:15.776Z,1516408875.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:16.160Z,1516408876.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:16.186Z,1516408876.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:16.577Z,1516408876.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:16.590Z,1516408876.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:16.954Z,1516408876.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:16.976Z,1516408876.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:17.378Z,1516408877.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:17.398Z,1516408877.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:17.784Z,1516408877.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:17.798Z,1516408877.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:18.180Z,1516408878.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:18.194Z,1516408878.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:18.555Z,1516408878.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:18.595Z,1516408878.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:18.959Z,1516408878.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:18.000Z,1516408879.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:19.357Z,1516408879.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:19.371Z,1516408879.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:19.760Z,1516408879.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:19.774Z,1516408879.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:20.157Z,1516408880.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:20.178Z,1516408880.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:20.566Z,1516408880.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:20.580Z,1516408880.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:20.978Z,1516408880.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:21.002Z,1516408881.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:21.373Z,1516408881.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:21.407Z,1516408881.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:21.756Z,1516408881.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:21.771Z,1516408881.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:22.161Z,1516408882.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:22.175Z,1516408882.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:22.565Z,1516408882.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:22.578Z,1516408882.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:22.957Z,1516408882.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:22.976Z,1516408882.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:23.370Z,1516408883.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:23.384Z,1516408883.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:23.774Z,1516408883.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:23.788Z,1516408883.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:24.170Z,1516408884.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:24.185Z,1516408884.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:24.567Z,1516408884.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:24.582Z,1516408884.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:24.968Z,1516408884.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:24.982Z,1516408884.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:25.361Z,1516408885.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:25.376Z,1516408885.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:25.762Z,1516408885.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:25.781Z,1516408885.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:26.168Z,1516408886.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:26.182Z,1516408886.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:26.569Z,1516408886.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:26.583Z,1516408886.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:26.974Z,1516408886.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:26.988Z,1516408886.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:27.370Z,1516408887.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:27.390Z,1516408887.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:27.757Z,1516408887.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:27.775Z,1516408887.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:28.164Z,1516408888.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:28.178Z,1516408888.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:28.569Z,1516408888.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:28.583Z,1516408888.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:28.960Z,1516408888.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:28.987Z,1516408888.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:29.373Z,1516408889.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:29.395Z,1516408889.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:29.774Z,1516408889.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:29.788Z,1516408889.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:30.173Z,1516408890.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:30.187Z,1516408890.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:30.571Z,1516408890.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:30.586Z,1516408890.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:30.968Z,1516408890.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:30.982Z,1516408890.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:31.361Z,1516408891.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:31.376Z,1516408891.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:31.762Z,1516408891.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:31.781Z,1516408891.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:32.151Z,1516408892.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:32.186Z,1516408892.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:32.565Z,1516408892.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:32.588Z,1516408892.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:32.981Z,1516408892.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:32.995Z,1516408892.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:33.379Z,1516408893.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:33.392Z,1516408893.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:33.753Z,1516408893.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:33.784Z,1516408893.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:34.159Z,1516408894.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:34.185Z,1516408894.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:34.560Z,1516408894.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:34.587Z,1516408894.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:34.953Z,1516408894.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:34.979Z,1516408894.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:35.378Z,1516408895.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:35.392Z,1516408895.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:35.782Z,1516408895.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:35.796Z,1516408895.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:36.162Z,1516408896.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:36.187Z,1516408896.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:36.555Z,1516408896.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:36.586Z,1516408896.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:36.959Z,1516408896.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:36.992Z,1516408896.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:37.357Z,1516408897.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:37.387Z,1516408897.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:37.760Z,1516408897.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:37.790Z,1516408897.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:38.155Z,1516408898.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:38.169Z,1516408898.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:38.570Z,1516408898.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:38.591Z,1516408898.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:38.974Z,1516408898.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:39.003Z,1516408899.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:39.374Z,1516408899.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:39.398Z,1516408899.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:39.753Z,1516408899.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:39.767Z,1516408899.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:40.163Z,1516408900.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:40.196Z,1516408900.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:40.560Z,1516408900.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:40.574Z,1516408900.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:40.953Z,1516408900.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:40.967Z,1516408900.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:41.374Z,1516408901.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:41.403Z,1516408901.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:41.785Z,1516408901.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:41.799Z,1516408901.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:42.166Z,1516408902.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:42.192Z,1516408902.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:42.563Z,1516408902.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:42.603Z,1516408902.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:42.963Z,1516408902.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:42.977Z,1516408902.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:43.361Z,1516408903.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:43.375Z,1516408903.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:43.760Z,1516408903.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:43.779Z,1516408903.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:44.163Z,1516408904.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:44.182Z,1516408904.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:44.562Z,1516408904.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:44.583Z,1516408904.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:44.978Z,1516408904.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:44.999Z,1516408904.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:45.378Z,1516408905.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:45.401Z,1516408905.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:45.761Z,1516408905.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:45.775Z,1516408905.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:46.166Z,1516408906.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:46.180Z,1516408906.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:46.563Z,1516408906.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:46.577Z,1516408906.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:46.962Z,1516408906.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:46.976Z,1516408906.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:47.378Z,1516408907.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:47.399Z,1516408907.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:47.778Z,1516408907.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:47.802Z,1516408907.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:48.163Z,1516408908.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:48.177Z,1516408908.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:48.563Z,1516408908.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:48.577Z,1516408908.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:48.966Z,1516408908.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:48.980Z,1516408908.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:49.362Z,1516408909.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:49.376Z,1516408909.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:49.761Z,1516408909.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:49.780Z,1516408909.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:50.166Z,1516408910.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:50.180Z,1516408910.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:50.567Z,1516408910.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:50.582Z,1516408910.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:50.979Z,1516408910.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:51.011Z,1516408911.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:51.379Z,1516408911.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:51.415Z,1516408911.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:51.757Z,1516408911.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:51.775Z,1516408911.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:52.168Z,1516408912.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:52.183Z,1516408912.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:52.570Z,1516408912.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:52.584Z,1516408912.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:55.652Z,1516408915.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:55.671Z,1516408915.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:55.787Z,1516408915.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:55.810Z,1516408915.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:56.143Z,1516408916.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:56.172Z,1516408916.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:56.546Z,1516408916.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:56.569Z,1516408916.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:56.925Z,1516408916.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:56.940Z,1516408916.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:57.330Z,1516408917.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:57.344Z,1516408917.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:57.730Z,1516408917.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:57.743Z,1516408917.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:58.131Z,1516408918.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:58.151Z,1516408918.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:58.537Z,1516408918.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:58.551Z,1516408918.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:58.938Z,1516408918.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:58.952Z,1516408918.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:59.338Z,1516408919.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:59.352Z,1516408919.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:41:59.736Z,1516408919.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:41:59.750Z,1516408919.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:00.133Z,1516408920.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:00.147Z,1516408920.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:00.534Z,1516408920.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:00.548Z,1516408920.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:00.932Z,1516408920.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:00.951Z,1516408920.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:01.338Z,1516408921.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:01.352Z,1516408921.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:01.737Z,1516408921.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:01.751Z,1516408921.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:02.139Z,1516408922.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:02.153Z,1516408922.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:02.533Z,1516408922.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:02.546Z,1516408922.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:02.925Z,1516408922.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:02.940Z,1516408922.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:03.331Z,1516408923.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:03.351Z,1516408923.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:03.736Z,1516408923.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:03.750Z,1516408923.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:04.133Z,1516408924.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:04.147Z,1516408924.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:04.539Z,1516408924.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:04.553Z,1516408924.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:04.938Z,1516408924.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:04.952Z,1516408924.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:05.339Z,1516408925.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:05.354Z,1516408925.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:05.734Z,1516408925.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:05.748Z,1516408925.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:06.133Z,1516408926.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:06.146Z,1516408926.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:06.533Z,1516408926.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:06.547Z,1516408926.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:06.926Z,1516408926.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:06.950Z,1516408926.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:07.342Z,1516408927.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:07.356Z,1516408927.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:07.742Z,1516408927.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:07.756Z,1516408927.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:08.142Z,1516408928.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:08.159Z,1516408928.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:08.536Z,1516408928.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:08.550Z,1516408928.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:08.922Z,1516408928.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:08.945Z,1516408928.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:09.325Z,1516408929.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:09.347Z,1516408929.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:09.733Z,1516408929.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:09.747Z,1516408929.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:10.136Z,1516408930.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:10.150Z,1516408930.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:10.539Z,1516408930.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:10.559Z,1516408930.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:10.942Z,1516408930.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:10.956Z,1516408930.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:11.338Z,1516408931.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:11.352Z,1516408931.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:11.723Z,1516408931.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:11.755Z,1516408931.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:12.135Z,1516408932.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:12.149Z,1516408932.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:12.535Z,1516408932.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:12.555Z,1516408932.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:12.919Z,1516408932.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:12.951Z,1516408932.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:13.335Z,1516408933.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:13.357Z,1516408933.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:13.736Z,1516408933.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:13.758Z,1516408933.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:14.134Z,1516408934.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:14.156Z,1516408934.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:14.518Z,1516408934.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:14.552Z,1516408934.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:14.913Z,1516408934.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:14.960Z,1516408934.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:15.332Z,1516408935.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:15.363Z,1516408935.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:15.747Z,1516408935.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:15.760Z,1516408935.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:16.131Z,1516408936.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:16.156Z,1516408936.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:16.524Z,1516408936.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:16.554Z,1516408936.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:16.915Z,1516408936.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:16.956Z,1516408936.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:17.343Z,1516408937.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:17.350Z,1516408937.350 [PNI_TCM](ERROR): CRC does not match. Expected:0x14393 got:0x49482
2018-01-20T00:42:17.375Z,1516408937.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:17.742Z,1516408937.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:17.760Z,1516408937.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:18.132Z,1516408938.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:18.166Z,1516408938.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:18.518Z,1516408938.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:18.551Z,1516408938.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:18.921Z,1516408938.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:18.928Z,1516408938.928 [PNI_TCM](ERROR): CRC does not match. Expected:0x7534 got:0x18993
2018-01-20T00:42:18.959Z,1516408938.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:19.326Z,1516408939.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:19.366Z,1516408939.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:19.730Z,1516408939.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:19.767Z,1516408939.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:20.140Z,1516408940.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:20.171Z,1516408940.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:20.531Z,1516408940.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:20.563Z,1516408940.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:20.919Z,1516408940.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:20.935Z,1516408940.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:21.335Z,1516408941.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:21.362Z,1516408941.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:21.750Z,1516408941.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:21.764Z,1516408941.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:22.136Z,1516408942.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:22.160Z,1516408942.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:22.531Z,1516408942.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:22.561Z,1516408942.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:22.924Z,1516408942.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:22.960Z,1516408942.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:23.349Z,1516408943.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:23.371Z,1516408943.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:23.740Z,1516408943.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:23.762Z,1516408943.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:24.150Z,1516408944.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:24.164Z,1516408944.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:24.525Z,1516408944.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:24.570Z,1516408944.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:24.926Z,1516408944.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:24.961Z,1516408944.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:25.341Z,1516408945.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:25.367Z,1516408945.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:25.733Z,1516408945.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:25.755Z,1516408945.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:26.136Z,1516408946.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:26.170Z,1516408946.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:26.521Z,1516408946.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:26.547Z,1516408946.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:26.920Z,1516408946.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:26.940Z,1516408946.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:27.347Z,1516408947.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:27.375Z,1516408947.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:27.739Z,1516408947.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:27.766Z,1516408947.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:28.140Z,1516408948.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:28.150Z,1516408948.150 [PNI_TCM](ERROR): CRC does not match. Expected:0x48494 got:0x49935
2018-01-20T00:42:28.172Z,1516408948.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:28.524Z,1516408948.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:28.559Z,1516408948.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:28.932Z,1516408948.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:28.946Z,1516408948.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:29.343Z,1516408949.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:29.379Z,1516408949.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:29.735Z,1516408949.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:29.744Z,1516408949.744 [PNI_TCM](ERROR): CRC does not match. Expected:0x36910 got:0x49483
2018-01-20T00:42:29.778Z,1516408949.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:30.132Z,1516408950.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:30.141Z,1516408950.141 [PNI_TCM](ERROR): CRC does not match. Expected:0x22640 got:0x5818
2018-01-20T00:42:30.175Z,1516408950.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:30.531Z,1516408950.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:30.551Z,1516408950.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:30.928Z,1516408950.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:30.974Z,1516408950.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:31.330Z,1516408951.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:31.349Z,1516408951.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:31.731Z,1516408951.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:31.748Z,1516408951.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:32.144Z,1516408952.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:32.172Z,1516408952.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:32.528Z,1516408952.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:32.572Z,1516408952.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:32.926Z,1516408952.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:32.941Z,1516408952.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:33.345Z,1516408953.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:33.372Z,1516408953.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:33.744Z,1516408953.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:33.773Z,1516408953.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:34.131Z,1516408954.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:34.175Z,1516408954.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:34.526Z,1516408954.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:34.541Z,1516408954.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:34.924Z,1516408954.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:34.941Z,1516408954.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:35.331Z,1516408955.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:35.347Z,1516408955.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:35.743Z,1516408955.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:35.771Z,1516408955.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:36.130Z,1516408956.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:36.173Z,1516408956.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:36.530Z,1516408956.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:36.548Z,1516408956.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:36.930Z,1516408956.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:36.947Z,1516408956.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:37.343Z,1516408957.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:37.373Z,1516408957.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:37.731Z,1516408957.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:37.745Z,1516408957.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:38.131Z,1516408958.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:38.148Z,1516408958.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:38.529Z,1516408958.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:38.547Z,1516408958.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:38.918Z,1516408958.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:38.938Z,1516408958.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:39.331Z,1516408959.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:39.345Z,1516408959.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:39.730Z,1516408959.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:39.746Z,1516408959.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:40.131Z,1516408960.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:40.148Z,1516408960.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:40.529Z,1516408960.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:40.543Z,1516408960.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:40.928Z,1516408960.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:40.942Z,1516408960.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:41.343Z,1516408961.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:41.370Z,1516408961.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:41.735Z,1516408961.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:41.752Z,1516408961.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:42.130Z,1516408962.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:42.150Z,1516408962.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:42.522Z,1516408962.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:42.543Z,1516408962.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:42.926Z,1516408962.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:42.945Z,1516408962.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:43.332Z,1516408963.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:43.350Z,1516408963.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:43.738Z,1516408963.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:43.752Z,1516408963.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:44.141Z,1516408964.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:44.156Z,1516408964.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:44.542Z,1516408964.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:44.562Z,1516408964.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:44.913Z,1516408964.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:44.949Z,1516408964.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:45.332Z,1516408965.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:45.351Z,1516408965.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:45.720Z,1516408965.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:45.755Z,1516408965.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:46.132Z,1516408966.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:46.146Z,1516408966.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:46.539Z,1516408966.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:46.557Z,1516408966.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:46.943Z,1516408966.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:46.957Z,1516408966.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:47.334Z,1516408967.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:47.352Z,1516408967.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:47.719Z,1516408967.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:47.751Z,1516408967.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:48.130Z,1516408968.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:48.156Z,1516408968.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:48.513Z,1516408968.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:48.540Z,1516408968.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:48.920Z,1516408968.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:48.970Z,1516408968.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:49.323Z,1516408969.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:49.351Z,1516408969.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:49.739Z,1516408969.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:49.758Z,1516408969.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:50.143Z,1516408970.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:50.157Z,1516408970.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:50.540Z,1516408970.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:50.554Z,1516408970.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:50.915Z,1516408970.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:50.947Z,1516408970.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:51.323Z,1516408971.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:51.349Z,1516408971.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:51.720Z,1516408971.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:51.755Z,1516408971.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:52.123Z,1516408972.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:52.154Z,1516408972.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:52.542Z,1516408972.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:52.560Z,1516408972.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:52.945Z,1516408972.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:52.963Z,1516408972.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:56.056Z,1516408976.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:56.071Z,1516408976.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:56.178Z,1516408976.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:56.207Z,1516408976.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:56.536Z,1516408976.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:56.575Z,1516408976.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:56.953Z,1516408976.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:56.967Z,1516408976.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:57.348Z,1516408977.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:57.363Z,1516408977.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:57.755Z,1516408977.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:57.773Z,1516408977.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:58.155Z,1516408978.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:58.169Z,1516408978.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:58.546Z,1516408978.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:58.569Z,1516408978.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:58.935Z,1516408978.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:58.971Z,1516408978.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:59.340Z,1516408979.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:59.370Z,1516408979.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:42:59.751Z,1516408979.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:42:59.765Z,1516408979.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:00.152Z,1516408980.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:00.167Z,1516408980.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:00.546Z,1516408980.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:00.568Z,1516408980.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:00.950Z,1516408980.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:00.977Z,1516408980.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:01.359Z,1516408981.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:01.373Z,1516408981.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:01.737Z,1516408981.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:01.772Z,1516408981.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:02.132Z,1516408982.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:02.167Z,1516408982.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:02.564Z,1516408982.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:02.582Z,1516408982.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:02.960Z,1516408982.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:02.974Z,1516408982.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:03.343Z,1516408983.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:03.376Z,1516408983.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:03.740Z,1516408983.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:03.767Z,1516408983.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:04.131Z,1516408984.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:04.169Z,1516408984.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:04.530Z,1516408984.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:04.553Z,1516408984.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:04.938Z,1516408984.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:04.964Z,1516408984.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:05.339Z,1516408985.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:05.381Z,1516408985.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:05.743Z,1516408985.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:05.785Z,1516408985.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:06.163Z,1516408986.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:06.178Z,1516408986.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:06.546Z,1516408986.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:06.575Z,1516408986.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:06.934Z,1516408986.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:06.948Z,1516408986.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:07.344Z,1516408987.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:07.379Z,1516408987.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:07.745Z,1516408987.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:07.758Z,1516408987.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:08.131Z,1516408988.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:08.157Z,1516408988.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:08.550Z,1516408988.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:08.574Z,1516408988.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:08.947Z,1516408988.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:08.967Z,1516408988.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:09.347Z,1516408989.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:09.367Z,1516408989.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:09.746Z,1516408989.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:09.760Z,1516408989.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:10.141Z,1516408990.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:10.155Z,1516408990.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:10.535Z,1516408990.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:10.556Z,1516408990.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:10.943Z,1516408990.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:10.958Z,1516408990.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:11.339Z,1516408991.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:11.365Z,1516408991.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:11.745Z,1516408991.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:11.760Z,1516408991.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:12.150Z,1516408992.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:12.165Z,1516408992.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:12.550Z,1516408992.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:12.564Z,1516408992.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:12.940Z,1516408992.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:12.964Z,1516408992.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:13.344Z,1516408993.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:13.358Z,1516408993.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:13.746Z,1516408993.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:13.759Z,1516408993.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:14.135Z,1516408994.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:14.169Z,1516408994.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:14.558Z,1516408994.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:14.579Z,1516408994.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:14.962Z,1516408994.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:14.975Z,1516408994.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:15.358Z,1516408995.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:15.379Z,1516408995.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:15.736Z,1516408995.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:15.761Z,1516408995.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:16.132Z,1516408996.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:16.164Z,1516408996.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:16.534Z,1516408996.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:16.560Z,1516408996.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:16.937Z,1516408996.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:16.971Z,1516408996.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:17.339Z,1516408997.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:17.366Z,1516408997.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:17.746Z,1516408997.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:17.769Z,1516408997.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:18.154Z,1516408998.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:18.172Z,1516408998.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:18.542Z,1516408998.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:18.569Z,1516408998.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:18.932Z,1516408998.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:18.976Z,1516408998.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:19.340Z,1516408999.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:19.370Z,1516408999.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:19.737Z,1516408999.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:19.772Z,1516408999.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:20.140Z,1516409000.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:20.171Z,1516409000.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:20.546Z,1516409000.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:20.579Z,1516409000.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:20.963Z,1516409000.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:20.977Z,1516409000.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:21.358Z,1516409001.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:21.379Z,1516409001.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:21.735Z,1516409001.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:21.765Z,1516409001.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:22.140Z,1516409002.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:22.179Z,1516409002.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:22.534Z,1516409002.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:22.548Z,1516409002.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:22.940Z,1516409002.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:22.979Z,1516409002.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:23.343Z,1516409003.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:23.357Z,1516409003.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:23.750Z,1516409003.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:23.780Z,1516409003.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:24.154Z,1516409004.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:24.184Z,1516409004.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:24.557Z,1516409004.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:24.591Z,1516409004.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:24.934Z,1516409004.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:24.956Z,1516409004.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:25.341Z,1516409005.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:25.364Z,1516409005.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:25.746Z,1516409005.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:25.760Z,1516409005.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:26.141Z,1516409006.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:26.156Z,1516409006.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:26.546Z,1516409006.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:26.561Z,1516409006.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:26.950Z,1516409006.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:26.964Z,1516409006.964 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:26.964Z,1516409006.964 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-01-20T00:43:26.964Z,1516409006.964 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:43:26.966Z,1516409006.966 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:26.966Z,1516409006.966 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-01-20T00:43:26.966Z,1516409006.966 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:43:26.967Z,1516409006.967 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:26.968Z,1516409006.968 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 71
2018-01-20T00:43:26.968Z,1516409006.968 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:43:27.022Z,1516409007.022 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:43:27.022Z,1516409007.022 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:43:27.023Z,1516409007.023 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:43:27.350Z,1516409007.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:27.375Z,1516409007.375 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:43:27.375Z,1516409007.375 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-01-20T00:43:27.375Z,1516409007.375 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:43:27.376Z,1516409007.376 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-01-20T00:43:27.376Z,1516409007.376 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:43:27.376Z,1516409007.376 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 71
2018-01-20T00:43:27.738Z,1516409007.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:27.760Z,1516409007.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:43:27.760Z,1516409007.760 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:43:27.760Z,1516409007.760 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:43:27.761Z,1516409007.761 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:43:27.761Z,1516409007.761 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:43:27.762Z,1516409007.762 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:43:27.762Z,1516409007.762 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:43:27.763Z,1516409007.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:43:27.763Z,1516409007.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:43:28.156Z,1516409008.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:28.171Z,1516409008.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:43:28.171Z,1516409008.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:28.542Z,1516409008.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:28.560Z,1516409008.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:43:28.561Z,1516409008.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:28.941Z,1516409008.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:28.962Z,1516409008.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:43:28.963Z,1516409008.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:29.345Z,1516409009.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:29.359Z,1516409009.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:43:29.360Z,1516409009.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:29.751Z,1516409009.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:29.777Z,1516409009.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:43:29.778Z,1516409009.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:30.161Z,1516409010.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:30.182Z,1516409010.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:43:30.183Z,1516409010.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:30.559Z,1516409010.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:30.573Z,1516409010.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:43:30.574Z,1516409010.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:30.934Z,1516409010.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:30.959Z,1516409010.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:43:30.960Z,1516409010.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:31.340Z,1516409011.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:31.364Z,1516409011.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:43:31.366Z,1516409011.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:31.736Z,1516409011.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:31.770Z,1516409011.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:43:31.771Z,1516409011.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:32.137Z,1516409012.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:32.154Z,1516409012.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:43:32.155Z,1516409012.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:32.544Z,1516409012.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:32.557Z,1516409012.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:43:32.558Z,1516409012.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:32.954Z,1516409012.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:32.987Z,1516409012.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:43:32.988Z,1516409012.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:33.350Z,1516409013.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:33.364Z,1516409013.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:43:33.381Z,1516409013.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:33.762Z,1516409013.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:33.785Z,1516409013.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:43:33.786Z,1516409013.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:34.141Z,1516409014.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:34.163Z,1516409014.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:43:34.164Z,1516409014.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:34.545Z,1516409014.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:34.559Z,1516409014.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:43:34.560Z,1516409014.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:34.943Z,1516409014.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:34.957Z,1516409014.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:43:34.958Z,1516409014.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:35.342Z,1516409015.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:35.363Z,1516409015.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:43:35.364Z,1516409015.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:35.758Z,1516409015.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:35.788Z,1516409015.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:43:35.789Z,1516409015.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:36.150Z,1516409016.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:36.164Z,1516409016.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:43:36.165Z,1516409016.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:36.547Z,1516409016.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:36.560Z,1516409016.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:43:36.562Z,1516409016.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:36.947Z,1516409016.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:36.988Z,1516409016.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:43:36.990Z,1516409016.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:37.342Z,1516409017.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:37.363Z,1516409017.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:43:37.364Z,1516409017.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:37.746Z,1516409017.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:37.759Z,1516409017.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:43:37.760Z,1516409017.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:38.147Z,1516409018.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:38.166Z,1516409018.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:43:38.167Z,1516409018.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:38.548Z,1516409018.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:38.562Z,1516409018.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:43:38.563Z,1516409018.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:38.950Z,1516409018.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:38.964Z,1516409018.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:43:38.965Z,1516409018.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:39.350Z,1516409019.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:39.364Z,1516409019.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:43:39.365Z,1516409019.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:39.751Z,1516409019.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:39.764Z,1516409019.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T00:43:39.765Z,1516409019.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:40.146Z,1516409020.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:40.160Z,1516409020.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:43:40.161Z,1516409020.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:40.541Z,1516409020.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:40.555Z,1516409020.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:43:40.556Z,1516409020.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:40.940Z,1516409020.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:40.971Z,1516409020.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:43:40.972Z,1516409020.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:41.350Z,1516409021.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:41.364Z,1516409021.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:43:41.365Z,1516409021.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:41.751Z,1516409021.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:41.765Z,1516409021.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:43:41.766Z,1516409021.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:42.155Z,1516409022.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:42.168Z,1516409022.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:43:42.169Z,1516409022.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:42.551Z,1516409022.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:42.570Z,1516409022.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:43:42.571Z,1516409022.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:42.950Z,1516409022.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:42.965Z,1516409022.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:43:42.966Z,1516409022.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:43.349Z,1516409023.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:43.363Z,1516409023.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:43:43.364Z,1516409023.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:43.739Z,1516409023.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:43.765Z,1516409023.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:43:43.766Z,1516409023.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:44.151Z,1516409024.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:44.165Z,1516409024.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:43:44.166Z,1516409024.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:44.535Z,1516409024.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:44.572Z,1516409024.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:43:44.573Z,1516409024.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:44.961Z,1516409024.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:44.976Z,1516409024.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:43:44.977Z,1516409024.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:45.359Z,1516409025.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:45.373Z,1516409025.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:43:45.374Z,1516409025.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:45.756Z,1516409025.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:45.770Z,1516409025.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:43:45.771Z,1516409025.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:46.133Z,1516409026.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:46.165Z,1516409026.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:43:46.166Z,1516409026.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:46.547Z,1516409026.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:46.562Z,1516409026.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:43:46.562Z,1516409026.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:46.946Z,1516409026.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:46.968Z,1516409026.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:47.340Z,1516409027.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:47.368Z,1516409027.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:47.748Z,1516409027.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:47.770Z,1516409027.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:48.162Z,1516409028.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:48.180Z,1516409028.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:48.563Z,1516409028.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:48.609Z,1516409028.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:48.932Z,1516409028.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:48.967Z,1516409028.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:49.340Z,1516409029.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:49.366Z,1516409029.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:49.732Z,1516409029.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:49.777Z,1516409029.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:50.141Z,1516409030.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:50.168Z,1516409030.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:50.535Z,1516409030.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:50.570Z,1516409030.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:50.960Z,1516409030.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:50.975Z,1516409030.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:51.361Z,1516409031.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:51.376Z,1516409031.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:51.379Z,1516409031.379 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T00:38:51.0Z
2018-01-20T00:43:51.379Z,1516409031.379 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T00:43:51.380Z,1516409031.380 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T00:43:51.746Z,1516409031.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:51.787Z,1516409031.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:52.182Z,1516409032.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:52.196Z,1516409032.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:52.539Z,1516409032.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:52.612Z,1516409032.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:57.181Z,1516409037.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:57.196Z,1516409037.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:58.141Z,1516409038.141 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0084.lzma
2018-01-20T00:43:58.182Z,1516409038.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:58.222Z,1516409038.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:58.333Z,1516409038.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:58.368Z,1516409038.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:58.990Z,1516409038.990 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0084.lzma.bak
2018-01-20T00:43:58.990Z,1516409038.990 [DataOverHttps](INFO): SBD MOMSN=7725391
2018-01-20T00:43:59.032Z,1516409039.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:59.113Z,1516409039.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:59.432Z,1516409039.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:59.467Z,1516409039.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:43:59.626Z,1516409039.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:43:59.678Z,1516409039.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:06.177Z,1516409046.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:06.213Z,1516409046.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:06.382Z,1516409046.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:06.434Z,1516409046.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:06.708Z,1516409046.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:06.742Z,1516409046.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:07.139Z,1516409047.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:07.153Z,1516409047.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:07.511Z,1516409047.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:07.536Z,1516409047.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:07.902Z,1516409047.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:07.938Z,1516409047.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:10.989Z,1516409050.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:11.003Z,1516409051.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:11.086Z,1516409051.086 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180119T210901/Express0085.lzma
2018-01-20T00:44:11.110Z,1516409051.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:11.138Z,1516409051.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:11.501Z,1516409051.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:11.515Z,1516409051.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:11.864Z,1516409051.864 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0085.lzma.bak
2018-01-20T00:44:11.864Z,1516409051.864 [DataOverHttps](INFO): SBD MOMSN=7725393
2018-01-20T00:44:11.917Z,1516409051.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:11.950Z,1516409051.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:12.399Z,1516409052.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:12.414Z,1516409052.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:12.417Z,1516409052.417 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T00:44:12.417Z,1516409052.417 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T00:44:12.417Z,1516409052.417 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T00:44:12.694Z,1516409052.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:12.713Z,1516409052.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:15.779Z,1516409055.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:15.802Z,1516409055.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:15.904Z,1516409055.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:15.923Z,1516409055.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:16.270Z,1516409056.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:16.303Z,1516409056.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:16.678Z,1516409056.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:16.706Z,1516409056.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:17.058Z,1516409057.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:17.072Z,1516409057.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:17.459Z,1516409057.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:17.479Z,1516409057.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:17.858Z,1516409057.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:17.872Z,1516409057.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:18.253Z,1516409058.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:18.275Z,1516409058.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:18.666Z,1516409058.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:18.681Z,1516409058.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:19.070Z,1516409059.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:19.084Z,1516409059.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:19.465Z,1516409059.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:19.479Z,1516409059.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:19.858Z,1516409059.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:19.876Z,1516409059.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:20.264Z,1516409060.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:20.278Z,1516409060.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:20.665Z,1516409060.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:20.680Z,1516409060.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:21.066Z,1516409061.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:21.080Z,1516409061.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:21.465Z,1516409061.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:21.479Z,1516409061.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:21.852Z,1516409061.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:21.872Z,1516409061.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:22.256Z,1516409062.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:22.283Z,1516409062.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:22.664Z,1516409062.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:22.683Z,1516409062.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:23.064Z,1516409063.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:23.078Z,1516409063.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:23.459Z,1516409063.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:23.479Z,1516409063.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:23.870Z,1516409063.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:23.884Z,1516409063.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:24.271Z,1516409064.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:24.286Z,1516409064.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:24.668Z,1516409064.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:24.687Z,1516409064.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:25.064Z,1516409065.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:25.079Z,1516409065.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:25.463Z,1516409065.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:25.483Z,1516409065.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:25.867Z,1516409065.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:25.887Z,1516409065.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:26.264Z,1516409066.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:26.279Z,1516409066.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:26.670Z,1516409066.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:26.684Z,1516409066.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:27.070Z,1516409067.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:27.084Z,1516409067.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:27.471Z,1516409067.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:27.491Z,1516409067.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:27.864Z,1516409067.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:27.879Z,1516409067.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:28.264Z,1516409068.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:28.283Z,1516409068.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:28.665Z,1516409068.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:28.679Z,1516409068.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:29.065Z,1516409069.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:29.079Z,1516409069.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:29.459Z,1516409069.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:29.474Z,1516409069.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:29.867Z,1516409069.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:29.885Z,1516409069.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:30.269Z,1516409070.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:30.287Z,1516409070.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:30.670Z,1516409070.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:30.684Z,1516409070.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:31.060Z,1516409071.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:31.080Z,1516409071.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:31.455Z,1516409071.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:31.478Z,1516409071.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:31.862Z,1516409071.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:31.876Z,1516409071.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:32.254Z,1516409072.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:32.285Z,1516409072.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:32.667Z,1516409072.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:32.686Z,1516409072.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:33.080Z,1516409073.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:33.094Z,1516409073.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:33.472Z,1516409073.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:33.486Z,1516409073.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:33.847Z,1516409073.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:33.883Z,1516409073.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:34.272Z,1516409074.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:34.287Z,1516409074.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:34.651Z,1516409074.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:34.688Z,1516409074.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:35.056Z,1516409075.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:35.083Z,1516409075.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:35.451Z,1516409075.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:35.483Z,1516409075.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:35.879Z,1516409075.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:35.894Z,1516409075.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:36.266Z,1516409076.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:36.288Z,1516409076.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:36.671Z,1516409076.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:36.711Z,1516409076.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:37.058Z,1516409077.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:37.078Z,1516409077.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:37.448Z,1516409077.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:37.479Z,1516409077.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:37.860Z,1516409077.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:37.875Z,1516409077.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:38.248Z,1516409078.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:38.280Z,1516409078.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:38.664Z,1516409078.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:38.683Z,1516409078.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:39.074Z,1516409079.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:39.095Z,1516409079.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:39.474Z,1516409079.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:39.488Z,1516409079.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:39.874Z,1516409079.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:39.895Z,1516409079.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:40.262Z,1516409080.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:40.281Z,1516409080.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:40.646Z,1516409080.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:40.686Z,1516409080.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:41.048Z,1516409081.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:41.073Z,1516409081.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:41.451Z,1516409081.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:41.482Z,1516409081.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:41.862Z,1516409081.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:41.903Z,1516409081.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:42.278Z,1516409082.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:42.292Z,1516409082.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:42.662Z,1516409082.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:42.695Z,1516409082.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:43.047Z,1516409083.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:43.090Z,1516409083.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:43.455Z,1516409083.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:43.486Z,1516409083.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:43.851Z,1516409083.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:43.886Z,1516409083.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:44.256Z,1516409084.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:44.287Z,1516409084.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:44.655Z,1516409084.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:44.686Z,1516409084.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:45.062Z,1516409085.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:45.099Z,1516409085.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:45.479Z,1516409085.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:45.493Z,1516409085.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:45.866Z,1516409085.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:45.891Z,1516409085.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:46.259Z,1516409086.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:46.290Z,1516409086.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:46.650Z,1516409086.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:46.691Z,1516409086.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:47.053Z,1516409087.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:47.067Z,1516409087.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:47.455Z,1516409087.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:47.491Z,1516409087.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:47.866Z,1516409087.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:47.899Z,1516409087.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:48.274Z,1516409088.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:48.303Z,1516409088.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:48.670Z,1516409088.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:48.691Z,1516409088.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:49.059Z,1516409089.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:49.073Z,1516409089.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:49.452Z,1516409089.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:49.466Z,1516409089.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:49.859Z,1516409089.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:49.895Z,1516409089.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:50.260Z,1516409090.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:50.274Z,1516409090.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:50.659Z,1516409090.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:50.679Z,1516409090.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:51.070Z,1516409091.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:51.084Z,1516409091.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:51.474Z,1516409091.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:51.487Z,1516409091.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:51.874Z,1516409091.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:51.888Z,1516409091.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:52.263Z,1516409092.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:52.283Z,1516409092.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:52.663Z,1516409092.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:52.677Z,1516409092.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:53.063Z,1516409093.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:53.083Z,1516409093.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:53.463Z,1516409093.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:53.477Z,1516409093.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:53.866Z,1516409093.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:53.880Z,1516409093.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:54.270Z,1516409094.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:54.284Z,1516409094.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:54.666Z,1516409094.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:54.680Z,1516409094.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:55.064Z,1516409095.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:55.077Z,1516409095.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:55.463Z,1516409095.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:55.477Z,1516409095.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:55.863Z,1516409095.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:55.877Z,1516409095.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:56.264Z,1516409096.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:56.278Z,1516409096.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:56.663Z,1516409096.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:56.677Z,1516409096.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:57.066Z,1516409097.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:57.080Z,1516409097.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:57.470Z,1516409097.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:57.484Z,1516409097.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:57.866Z,1516409097.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:57.880Z,1516409097.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:58.254Z,1516409098.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:58.284Z,1516409098.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:58.663Z,1516409098.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:58.677Z,1516409098.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:59.063Z,1516409099.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:59.083Z,1516409099.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:59.462Z,1516409099.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:59.476Z,1516409099.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:44:59.866Z,1516409099.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:44:59.880Z,1516409099.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:00.270Z,1516409100.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:00.284Z,1516409100.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:00.666Z,1516409100.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:00.680Z,1516409100.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:01.063Z,1516409101.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:01.077Z,1516409101.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:01.463Z,1516409101.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:01.477Z,1516409101.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:01.862Z,1516409101.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:01.876Z,1516409101.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:02.255Z,1516409102.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:02.283Z,1516409102.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:02.663Z,1516409102.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:02.677Z,1516409102.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:03.063Z,1516409103.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:03.083Z,1516409103.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:03.470Z,1516409103.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:03.483Z,1516409103.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:03.866Z,1516409103.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:03.880Z,1516409103.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:04.267Z,1516409104.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:04.303Z,1516409104.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:04.660Z,1516409104.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:04.674Z,1516409104.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:05.061Z,1516409105.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:05.075Z,1516409105.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:05.460Z,1516409105.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:05.475Z,1516409105.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:05.861Z,1516409105.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:05.875Z,1516409105.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:06.274Z,1516409106.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:06.307Z,1516409106.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:06.674Z,1516409106.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:06.688Z,1516409106.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:07.064Z,1516409107.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:07.078Z,1516409107.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:07.464Z,1516409107.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:07.478Z,1516409107.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:07.864Z,1516409107.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:07.878Z,1516409107.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:08.257Z,1516409108.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:08.271Z,1516409108.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:08.664Z,1516409108.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:08.678Z,1516409108.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:09.065Z,1516409109.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:09.079Z,1516409109.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:09.470Z,1516409109.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:09.484Z,1516409109.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:09.860Z,1516409109.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:09.886Z,1516409109.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:10.264Z,1516409110.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:10.283Z,1516409110.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:10.662Z,1516409110.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:10.676Z,1516409110.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:11.058Z,1516409111.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:11.077Z,1516409111.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:11.465Z,1516409111.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:11.479Z,1516409111.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:11.871Z,1516409111.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:11.885Z,1516409111.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:12.272Z,1516409112.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:12.291Z,1516409112.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:12.670Z,1516409112.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:12.684Z,1516409112.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:13.067Z,1516409113.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:13.080Z,1516409113.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:16.164Z,1516409116.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:16.178Z,1516409116.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:16.272Z,1516409116.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:16.314Z,1516409116.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:16.666Z,1516409116.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:16.680Z,1516409116.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:17.060Z,1516409117.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:17.081Z,1516409117.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:17.462Z,1516409117.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:17.476Z,1516409117.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:17.855Z,1516409117.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:17.869Z,1516409117.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:18.256Z,1516409118.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:18.271Z,1516409118.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:18.643Z,1516409118.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:18.675Z,1516409118.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:19.055Z,1516409119.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:19.069Z,1516409119.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:19.456Z,1516409119.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:19.470Z,1516409119.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:19.862Z,1516409119.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:19.876Z,1516409119.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:20.268Z,1516409120.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:20.282Z,1516409120.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:20.657Z,1516409120.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:20.672Z,1516409120.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:21.055Z,1516409121.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:21.069Z,1516409121.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:21.443Z,1516409121.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:21.468Z,1516409121.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:21.858Z,1516409121.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:21.872Z,1516409121.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:22.242Z,1516409122.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:22.279Z,1516409122.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:22.666Z,1516409122.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:22.680Z,1516409122.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:23.062Z,1516409123.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:23.077Z,1516409123.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:23.462Z,1516409123.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:23.476Z,1516409123.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:23.843Z,1516409123.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:23.878Z,1516409123.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:24.247Z,1516409124.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:24.279Z,1516409124.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:24.643Z,1516409124.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:24.678Z,1516409124.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:25.040Z,1516409125.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:25.082Z,1516409125.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:25.447Z,1516409125.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:25.482Z,1516409125.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:25.858Z,1516409125.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:25.883Z,1516409125.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:26.258Z,1516409126.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:26.283Z,1516409126.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:26.654Z,1516409126.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:26.680Z,1516409126.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:27.051Z,1516409127.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:27.082Z,1516409127.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:27.447Z,1516409127.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:27.485Z,1516409127.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:27.848Z,1516409127.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:27.878Z,1516409127.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:28.247Z,1516409128.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:28.283Z,1516409128.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:28.658Z,1516409128.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:28.690Z,1516409128.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:29.050Z,1516409129.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:29.064Z,1516409129.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:29.462Z,1516409129.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:29.484Z,1516409129.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:29.851Z,1516409129.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:29.895Z,1516409129.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:30.244Z,1516409130.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:30.258Z,1516409130.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:30.651Z,1516409130.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:30.687Z,1516409130.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:31.052Z,1516409131.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:31.066Z,1516409131.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:31.451Z,1516409131.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:31.465Z,1516409131.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:31.862Z,1516409131.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:31.892Z,1516409131.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:32.262Z,1516409132.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:32.276Z,1516409132.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:32.650Z,1516409132.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:32.671Z,1516409132.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:33.048Z,1516409133.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:33.067Z,1516409133.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:33.450Z,1516409133.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:33.463Z,1516409133.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:33.848Z,1516409133.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:33.876Z,1516409133.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:34.252Z,1516409134.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:34.271Z,1516409134.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:34.662Z,1516409134.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:34.676Z,1516409134.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:35.053Z,1516409135.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:35.067Z,1516409135.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:35.454Z,1516409135.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:35.468Z,1516409135.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:35.852Z,1516409135.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:35.866Z,1516409135.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:36.252Z,1516409136.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:36.266Z,1516409136.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:36.649Z,1516409136.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:36.667Z,1516409136.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:37.051Z,1516409137.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:37.064Z,1516409137.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:37.451Z,1516409137.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:37.466Z,1516409137.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:37.854Z,1516409137.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:37.868Z,1516409137.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:38.258Z,1516409138.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:38.272Z,1516409138.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:38.654Z,1516409138.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:38.675Z,1516409138.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:39.051Z,1516409139.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:39.071Z,1516409139.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:39.447Z,1516409139.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:39.461Z,1516409139.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:39.853Z,1516409139.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:39.867Z,1516409139.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:40.249Z,1516409140.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:40.271Z,1516409140.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:40.666Z,1516409140.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:40.680Z,1516409140.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:41.053Z,1516409141.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:41.067Z,1516409141.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:41.454Z,1516409141.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:41.468Z,1516409141.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:41.852Z,1516409141.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:41.866Z,1516409141.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:42.252Z,1516409142.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:42.267Z,1516409142.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:42.652Z,1516409142.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:42.671Z,1516409142.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:43.053Z,1516409143.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:43.066Z,1516409143.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:43.452Z,1516409143.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:43.466Z,1516409143.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:43.854Z,1516409143.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:43.868Z,1516409143.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:44.258Z,1516409144.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:44.271Z,1516409144.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:44.654Z,1516409144.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:44.668Z,1516409144.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:45.049Z,1516409145.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:45.071Z,1516409145.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:45.454Z,1516409145.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:45.468Z,1516409145.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:45.856Z,1516409145.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:45.871Z,1516409145.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:46.256Z,1516409146.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:46.270Z,1516409146.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:46.658Z,1516409146.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:46.672Z,1516409146.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:47.058Z,1516409147.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:47.072Z,1516409147.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:47.457Z,1516409147.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:47.479Z,1516409147.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:47.855Z,1516409147.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:47.869Z,1516409147.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:48.256Z,1516409148.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:48.271Z,1516409148.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:48.658Z,1516409148.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:48.672Z,1516409148.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:49.058Z,1516409149.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:49.072Z,1516409149.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:49.458Z,1516409149.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:49.472Z,1516409149.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:49.850Z,1516409149.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:49.870Z,1516409149.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:50.258Z,1516409150.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:50.271Z,1516409150.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:50.652Z,1516409150.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:50.666Z,1516409150.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:51.058Z,1516409151.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:51.072Z,1516409151.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:51.463Z,1516409151.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:51.477Z,1516409151.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:51.860Z,1516409151.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:51.874Z,1516409151.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:52.243Z,1516409152.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:52.294Z,1516409152.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:52.651Z,1516409152.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:52.684Z,1516409152.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:53.048Z,1516409153.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:53.082Z,1516409153.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:53.447Z,1516409153.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:53.487Z,1516409153.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:53.858Z,1516409153.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:53.891Z,1516409153.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:54.258Z,1516409154.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:54.284Z,1516409154.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:54.662Z,1516409154.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:54.692Z,1516409154.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:55.053Z,1516409155.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:55.066Z,1516409155.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:55.449Z,1516409155.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:55.463Z,1516409155.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:55.849Z,1516409155.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:55.867Z,1516409155.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:56.253Z,1516409156.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:56.267Z,1516409156.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:56.649Z,1516409156.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:56.664Z,1516409156.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:57.054Z,1516409157.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:57.069Z,1516409157.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:57.467Z,1516409157.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:57.496Z,1516409157.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:57.853Z,1516409157.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:57.868Z,1516409157.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:58.252Z,1516409158.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:58.266Z,1516409158.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:58.652Z,1516409158.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:58.666Z,1516409158.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:59.053Z,1516409159.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:59.067Z,1516409159.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:59.452Z,1516409159.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:59.471Z,1516409159.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:45:59.866Z,1516409159.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:45:59.897Z,1516409159.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:00.254Z,1516409160.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:00.268Z,1516409160.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:00.666Z,1516409160.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:00.695Z,1516409160.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:01.051Z,1516409161.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:01.064Z,1516409161.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:01.452Z,1516409161.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:01.466Z,1516409161.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:01.850Z,1516409161.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:01.870Z,1516409161.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:02.253Z,1516409162.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:02.266Z,1516409162.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:02.645Z,1516409162.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:02.659Z,1516409162.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:03.054Z,1516409163.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:03.068Z,1516409163.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:03.466Z,1516409163.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:03.497Z,1516409163.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:03.853Z,1516409163.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:03.867Z,1516409163.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:04.251Z,1516409164.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:04.271Z,1516409164.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:04.652Z,1516409164.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:04.666Z,1516409164.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:05.083Z,1516409165.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:05.097Z,1516409165.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:05.449Z,1516409165.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:05.467Z,1516409165.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:05.860Z,1516409165.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:05.874Z,1516409165.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:06.261Z,1516409166.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:06.275Z,1516409166.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:06.660Z,1516409166.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:06.679Z,1516409166.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:07.051Z,1516409167.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:07.064Z,1516409167.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:07.456Z,1516409167.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:07.470Z,1516409167.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:07.850Z,1516409167.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:07.868Z,1516409167.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:08.252Z,1516409168.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:08.265Z,1516409168.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:08.649Z,1516409168.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:08.663Z,1516409168.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:09.056Z,1516409169.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:09.083Z,1516409169.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:09.464Z,1516409169.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:09.478Z,1516409169.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:09.863Z,1516409169.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:09.877Z,1516409169.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:10.255Z,1516409170.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:10.269Z,1516409170.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:10.651Z,1516409170.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:10.665Z,1516409170.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:11.057Z,1516409171.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:11.071Z,1516409171.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:11.446Z,1516409171.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:11.467Z,1516409171.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:11.861Z,1516409171.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:11.875Z,1516409171.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:12.261Z,1516409172.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:12.280Z,1516409172.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:12.665Z,1516409172.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:12.679Z,1516409172.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:13.055Z,1516409173.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:13.074Z,1516409173.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:13.457Z,1516409173.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:13.471Z,1516409173.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:16.539Z,1516409176.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:16.563Z,1516409176.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:16.671Z,1516409176.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:16.711Z,1516409176.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:17.034Z,1516409177.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:17.057Z,1516409177.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:17.430Z,1516409177.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:17.461Z,1516409177.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:17.830Z,1516409177.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:17.860Z,1516409177.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:18.220Z,1516409178.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:18.239Z,1516409178.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:18.616Z,1516409178.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:18.630Z,1516409178.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:19.021Z,1516409179.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:19.043Z,1516409179.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:19.419Z,1516409179.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:19.439Z,1516409179.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:19.834Z,1516409179.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:19.848Z,1516409179.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:20.234Z,1516409180.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:20.248Z,1516409180.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:20.626Z,1516409180.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:20.640Z,1516409180.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:21.024Z,1516409181.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:21.037Z,1516409181.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:21.423Z,1516409181.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:21.443Z,1516409181.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:21.823Z,1516409181.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:21.843Z,1516409181.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:22.224Z,1516409182.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:22.238Z,1516409182.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:22.624Z,1516409182.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:22.638Z,1516409182.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:23.025Z,1516409183.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:23.047Z,1516409183.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:23.429Z,1516409183.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:23.443Z,1516409183.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:23.827Z,1516409183.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:23.841Z,1516409183.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:24.218Z,1516409184.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:24.236Z,1516409184.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:24.624Z,1516409184.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:24.638Z,1516409184.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:25.022Z,1516409185.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:25.036Z,1516409185.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:25.418Z,1516409185.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:25.441Z,1516409185.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:25.830Z,1516409185.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:25.844Z,1516409185.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:26.230Z,1516409186.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:26.244Z,1516409186.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:26.630Z,1516409186.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:26.644Z,1516409186.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:27.027Z,1516409187.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:27.040Z,1516409187.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:27.418Z,1516409187.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:27.433Z,1516409187.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:27.818Z,1516409187.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:27.839Z,1516409187.839 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:27.839Z,1516409187.839 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-01-20T00:46:27.840Z,1516409187.840 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:46:27.841Z,1516409187.841 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:27.842Z,1516409187.842 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-01-20T00:46:27.842Z,1516409187.842 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:46:27.843Z,1516409187.843 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:27.843Z,1516409187.843 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 72
2018-01-20T00:46:27.844Z,1516409187.844 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:46:27.855Z,1516409187.855 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:46:27.856Z,1516409187.856 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:46:27.856Z,1516409187.856 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:46:28.218Z,1516409188.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:28.256Z,1516409188.256 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:46:28.256Z,1516409188.256 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-01-20T00:46:28.257Z,1516409188.257 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:46:28.257Z,1516409188.257 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-01-20T00:46:28.257Z,1516409188.257 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:46:28.258Z,1516409188.258 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 72
2018-01-20T00:46:28.623Z,1516409188.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:28.638Z,1516409188.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:46:28.639Z,1516409188.639 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:46:28.639Z,1516409188.639 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:46:28.639Z,1516409188.639 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:46:28.640Z,1516409188.640 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:46:28.640Z,1516409188.640 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:46:28.640Z,1516409188.640 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:46:28.641Z,1516409188.641 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:46:28.641Z,1516409188.641 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:46:29.039Z,1516409189.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:29.058Z,1516409189.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:46:29.059Z,1516409189.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:29.434Z,1516409189.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:29.460Z,1516409189.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:46:29.461Z,1516409189.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:29.822Z,1516409189.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:29.844Z,1516409189.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:46:29.846Z,1516409189.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:30.212Z,1516409190.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:30.237Z,1516409190.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:46:30.238Z,1516409190.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:30.607Z,1516409190.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:30.639Z,1516409190.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:46:30.640Z,1516409190.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:31.027Z,1516409191.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:31.041Z,1516409191.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:46:31.042Z,1516409191.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:31.411Z,1516409191.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:31.437Z,1516409191.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:46:31.438Z,1516409191.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:31.829Z,1516409191.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:31.843Z,1516409191.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:46:31.844Z,1516409191.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:32.239Z,1516409192.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:32.252Z,1516409192.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:46:32.253Z,1516409192.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:32.631Z,1516409192.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:32.645Z,1516409192.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:46:32.646Z,1516409192.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:33.007Z,1516409193.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:33.044Z,1516409193.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:46:33.045Z,1516409193.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:33.415Z,1516409193.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:33.443Z,1516409193.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:46:33.444Z,1516409193.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:33.811Z,1516409193.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:33.836Z,1516409193.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:46:33.837Z,1516409193.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:34.208Z,1516409194.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:34.239Z,1516409194.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:46:34.240Z,1516409194.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:34.607Z,1516409194.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:34.638Z,1516409194.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:46:34.639Z,1516409194.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:35.030Z,1516409195.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:35.044Z,1516409195.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:46:35.045Z,1516409195.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:35.426Z,1516409195.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:35.454Z,1516409195.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:46:35.455Z,1516409195.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:35.818Z,1516409195.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:35.832Z,1516409195.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:46:35.849Z,1516409195.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:36.219Z,1516409196.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:36.233Z,1516409196.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:46:36.234Z,1516409196.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:36.619Z,1516409196.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:36.633Z,1516409196.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:46:36.634Z,1516409196.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:37.013Z,1516409197.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:37.027Z,1516409197.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:46:37.028Z,1516409197.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:37.416Z,1516409197.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:37.430Z,1516409197.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:46:37.431Z,1516409197.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:37.830Z,1516409197.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:37.862Z,1516409197.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:46:37.863Z,1516409197.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:38.222Z,1516409198.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:38.236Z,1516409198.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:46:38.237Z,1516409198.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:38.634Z,1516409198.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:38.654Z,1516409198.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:46:38.655Z,1516409198.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:39.015Z,1516409199.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:39.034Z,1516409199.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:46:39.035Z,1516409199.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:39.416Z,1516409199.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:39.430Z,1516409199.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:46:39.431Z,1516409199.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:39.816Z,1516409199.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:39.834Z,1516409199.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:46:39.835Z,1516409199.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:40.216Z,1516409200.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:40.229Z,1516409200.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:46:40.230Z,1516409200.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:40.613Z,1516409200.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:40.631Z,1516409200.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T00:46:40.632Z,1516409200.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:41.034Z,1516409201.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:41.055Z,1516409201.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:46:41.056Z,1516409201.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:41.434Z,1516409201.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:41.454Z,1516409201.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:46:41.455Z,1516409201.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:41.822Z,1516409201.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:41.849Z,1516409201.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:46:41.850Z,1516409201.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:42.222Z,1516409202.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:42.240Z,1516409202.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:46:42.241Z,1516409202.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:42.607Z,1516409202.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:42.633Z,1516409202.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:46:42.634Z,1516409202.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:43.024Z,1516409203.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:43.038Z,1516409203.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:46:43.039Z,1516409203.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:43.411Z,1516409203.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:43.442Z,1516409203.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:46:43.443Z,1516409203.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:43.825Z,1516409203.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:43.848Z,1516409203.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:46:43.849Z,1516409203.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:44.230Z,1516409204.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:44.250Z,1516409204.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:46:44.251Z,1516409204.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:44.630Z,1516409204.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:44.650Z,1516409204.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:46:44.651Z,1516409204.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:45.025Z,1516409205.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:45.038Z,1516409205.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:46:45.039Z,1516409205.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:45.424Z,1516409205.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:45.439Z,1516409205.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:46:45.439Z,1516409205.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:45.811Z,1516409205.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:45.842Z,1516409205.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:46:45.843Z,1516409205.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:46.208Z,1516409206.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:46.239Z,1516409206.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:46:46.240Z,1516409206.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:46.623Z,1516409206.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:46.639Z,1516409206.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:46:46.639Z,1516409206.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:47.030Z,1516409207.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:47.050Z,1516409207.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:46:47.051Z,1516409207.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:47.434Z,1516409207.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:47.448Z,1516409207.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:46:47.449Z,1516409207.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:47.822Z,1516409207.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:47.843Z,1516409207.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:48.211Z,1516409208.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:48.236Z,1516409208.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:48.607Z,1516409208.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:48.643Z,1516409208.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:49.016Z,1516409209.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:49.041Z,1516409209.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:49.411Z,1516409209.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:49.437Z,1516409209.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:49.827Z,1516409209.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:49.846Z,1516409209.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:50.238Z,1516409210.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:50.252Z,1516409210.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:50.630Z,1516409210.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:50.651Z,1516409210.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:51.015Z,1516409211.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:51.041Z,1516409211.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:51.415Z,1516409211.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:51.440Z,1516409211.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:51.811Z,1516409211.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:51.836Z,1516409211.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:52.208Z,1516409212.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:52.239Z,1516409212.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:52.607Z,1516409212.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:52.638Z,1516409212.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:53.030Z,1516409213.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:53.045Z,1516409213.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:53.430Z,1516409213.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:53.444Z,1516409213.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:53.822Z,1516409213.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:53.843Z,1516409213.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:54.211Z,1516409214.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:54.236Z,1516409214.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:54.615Z,1516409214.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:54.641Z,1516409214.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:55.016Z,1516409215.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:55.042Z,1516409215.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:55.411Z,1516409215.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:55.436Z,1516409215.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:55.822Z,1516409215.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:55.851Z,1516409215.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:56.228Z,1516409216.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:56.250Z,1516409216.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:56.633Z,1516409216.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:56.647Z,1516409216.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:57.007Z,1516409217.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:57.043Z,1516409217.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:57.415Z,1516409217.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:57.440Z,1516409217.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:57.811Z,1516409217.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:57.842Z,1516409217.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:58.208Z,1516409218.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:58.243Z,1516409218.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:58.615Z,1516409218.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:58.640Z,1516409218.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:59.030Z,1516409219.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:59.044Z,1516409219.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:59.431Z,1516409219.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:59.445Z,1516409219.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:46:59.818Z,1516409219.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:46:59.850Z,1516409219.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:00.211Z,1516409220.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:00.247Z,1516409220.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:00.615Z,1516409220.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:00.648Z,1516409220.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:01.010Z,1516409221.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:01.024Z,1516409221.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:01.411Z,1516409221.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:01.451Z,1516409221.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:01.826Z,1516409221.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:01.853Z,1516409221.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:02.230Z,1516409222.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:02.263Z,1516409222.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:02.626Z,1516409222.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:02.649Z,1516409222.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:03.012Z,1516409223.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:03.025Z,1516409223.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:03.420Z,1516409223.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:03.450Z,1516409223.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:03.818Z,1516409223.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:03.832Z,1516409223.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:04.221Z,1516409224.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:04.235Z,1516409224.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:04.619Z,1516409224.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:04.639Z,1516409224.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:05.031Z,1516409225.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:05.063Z,1516409225.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:05.435Z,1516409225.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:05.465Z,1516409225.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:05.819Z,1516409225.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:05.834Z,1516409225.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:06.217Z,1516409226.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:06.243Z,1516409226.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:06.621Z,1516409226.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:06.635Z,1516409226.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:07.022Z,1516409227.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:07.038Z,1516409227.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:07.421Z,1516409227.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:07.436Z,1516409227.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:07.823Z,1516409227.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:07.839Z,1516409227.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:08.235Z,1516409228.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:08.270Z,1516409228.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:08.626Z,1516409228.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:08.641Z,1516409228.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:09.021Z,1516409229.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:09.035Z,1516409229.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:09.422Z,1516409229.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:09.436Z,1516409229.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:09.821Z,1516409229.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:09.836Z,1516409229.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:10.222Z,1516409230.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:10.236Z,1516409230.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:10.621Z,1516409230.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:10.636Z,1516409230.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:11.023Z,1516409231.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:11.038Z,1516409231.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:11.427Z,1516409231.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:11.441Z,1516409231.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:11.822Z,1516409231.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:11.839Z,1516409231.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:12.220Z,1516409232.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:12.236Z,1516409232.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:12.616Z,1516409232.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:12.630Z,1516409232.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:13.021Z,1516409233.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:13.035Z,1516409233.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:13.419Z,1516409233.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:13.439Z,1516409233.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:13.834Z,1516409233.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:13.869Z,1516409233.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:16.918Z,1516409236.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:16.933Z,1516409236.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:17.050Z,1516409237.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:17.079Z,1516409237.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:17.388Z,1516409237.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:17.418Z,1516409237.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:17.787Z,1516409237.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:17.817Z,1516409237.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:18.181Z,1516409238.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:18.191Z,1516409238.191 [PNI_TCM](ERROR): CRC does not match. Expected:0x1175 got:0x49414
2018-01-20T00:47:18.227Z,1516409238.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:18.589Z,1516409238.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:18.596Z,1516409238.596 [PNI_TCM](ERROR): CRC does not match. Expected:0x24909 got:0x16816
2018-01-20T00:47:18.630Z,1516409238.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:19.007Z,1516409239.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:19.022Z,1516409239.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:19.410Z,1516409239.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:19.424Z,1516409239.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:19.800Z,1516409239.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:19.821Z,1516409239.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:20.189Z,1516409240.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:20.224Z,1516409240.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:20.581Z,1516409240.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:20.595Z,1516409240.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:20.988Z,1516409240.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:21.023Z,1516409241.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:21.379Z,1516409241.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:21.398Z,1516409241.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:21.796Z,1516409241.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:21.827Z,1516409241.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:22.202Z,1516409242.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:22.225Z,1516409242.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:22.598Z,1516409242.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:22.635Z,1516409242.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:22.981Z,1516409242.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:23.024Z,1516409243.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:23.390Z,1516409243.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:23.404Z,1516409243.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:23.802Z,1516409243.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:23.833Z,1516409243.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:24.198Z,1516409244.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:24.231Z,1516409244.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:24.604Z,1516409244.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:24.611Z,1516409244.611 [PNI_TCM](ERROR): CRC does not match. Expected:0x55399 got:0x36891
2018-01-20T00:47:24.631Z,1516409244.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:25.019Z,1516409245.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:25.033Z,1516409245.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:25.387Z,1516409245.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:25.401Z,1516409245.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:25.794Z,1516409245.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:25.829Z,1516409245.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:26.199Z,1516409246.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:26.231Z,1516409246.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:26.600Z,1516409246.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:26.630Z,1516409246.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:26.991Z,1516409246.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:27.011Z,1516409247.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:27.388Z,1516409247.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:27.435Z,1516409247.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:27.789Z,1516409247.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:27.807Z,1516409247.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:28.204Z,1516409248.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:28.234Z,1516409248.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:28.603Z,1516409248.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:28.616Z,1516409248.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:28.986Z,1516409248.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:29.029Z,1516409249.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:29.385Z,1516409249.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:29.407Z,1516409249.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:29.790Z,1516409249.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:29.807Z,1516409249.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:30.203Z,1516409250.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:30.234Z,1516409250.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:30.602Z,1516409250.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:30.639Z,1516409250.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:30.995Z,1516409250.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:31.013Z,1516409251.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:31.385Z,1516409251.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:31.404Z,1516409251.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:31.792Z,1516409251.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:31.807Z,1516409251.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:32.202Z,1516409252.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:32.234Z,1516409252.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:32.602Z,1516409252.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:32.636Z,1516409252.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:32.986Z,1516409252.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:33.005Z,1516409253.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:33.384Z,1516409253.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:33.402Z,1516409253.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:33.790Z,1516409253.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:33.804Z,1516409253.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:34.194Z,1516409254.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:34.209Z,1516409254.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:34.603Z,1516409254.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:34.639Z,1516409254.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:34.991Z,1516409254.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:35.008Z,1516409255.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:35.389Z,1516409255.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:35.434Z,1516409255.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:35.802Z,1516409255.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:35.835Z,1516409255.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:36.198Z,1516409256.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:36.216Z,1516409256.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:36.596Z,1516409256.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:36.612Z,1516409256.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:36.993Z,1516409256.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:37.019Z,1516409257.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:37.386Z,1516409257.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:37.400Z,1516409257.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:37.794Z,1516409257.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:37.812Z,1516409257.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:38.200Z,1516409258.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:38.215Z,1516409258.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:38.594Z,1516409258.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:38.629Z,1516409258.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:38.981Z,1516409258.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:38.999Z,1516409258.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:39.388Z,1516409259.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:39.426Z,1516409259.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:39.787Z,1516409259.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:39.806Z,1516409259.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:40.202Z,1516409260.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:40.224Z,1516409260.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:40.586Z,1516409260.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:40.606Z,1516409260.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:40.979Z,1516409260.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:41.005Z,1516409261.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:41.388Z,1516409261.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:41.412Z,1516409261.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:41.790Z,1516409261.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:41.804Z,1516409261.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:42.203Z,1516409262.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:42.239Z,1516409262.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:42.603Z,1516409262.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:42.637Z,1516409262.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:42.995Z,1516409262.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:43.013Z,1516409263.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:43.392Z,1516409263.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:43.407Z,1516409263.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:43.787Z,1516409263.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:43.802Z,1516409263.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:44.189Z,1516409264.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:44.203Z,1516409264.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:44.592Z,1516409264.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:44.610Z,1516409264.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:44.997Z,1516409264.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:45.019Z,1516409265.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:45.402Z,1516409265.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:45.416Z,1516409265.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:45.798Z,1516409265.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:45.812Z,1516409265.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:46.193Z,1516409266.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:46.208Z,1516409266.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:46.593Z,1516409266.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:46.606Z,1516409266.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:46.975Z,1516409266.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:47.012Z,1516409267.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:47.392Z,1516409267.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:47.407Z,1516409267.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:47.775Z,1516409267.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:47.802Z,1516409267.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:48.190Z,1516409268.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:48.217Z,1516409268.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:48.606Z,1516409268.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:48.627Z,1516409268.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:48.996Z,1516409268.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:49.009Z,1516409269.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:49.383Z,1516409269.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:49.408Z,1516409269.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:49.779Z,1516409269.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:49.804Z,1516409269.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:50.176Z,1516409270.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:50.211Z,1516409270.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:50.583Z,1516409270.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:50.608Z,1516409270.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:50.998Z,1516409270.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:51.012Z,1516409271.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:51.398Z,1516409271.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:51.412Z,1516409271.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:51.790Z,1516409271.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:51.811Z,1516409271.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:52.178Z,1516409272.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:52.211Z,1516409272.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:52.579Z,1516409272.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:52.620Z,1516409272.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:52.974Z,1516409272.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:52.996Z,1516409272.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:53.390Z,1516409273.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:53.404Z,1516409273.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:53.787Z,1516409273.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:53.801Z,1516409273.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:54.190Z,1516409274.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:54.204Z,1516409274.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:54.602Z,1516409274.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:54.632Z,1516409274.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:55.002Z,1516409275.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:55.016Z,1516409275.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:55.389Z,1516409275.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:55.403Z,1516409275.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:55.789Z,1516409275.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:55.803Z,1516409275.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:56.185Z,1516409276.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:56.199Z,1516409276.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:56.589Z,1516409276.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:56.603Z,1516409276.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:56.990Z,1516409276.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:57.004Z,1516409277.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:57.394Z,1516409277.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:57.407Z,1516409277.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:57.789Z,1516409277.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:57.807Z,1516409277.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:58.189Z,1516409278.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:58.203Z,1516409278.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:58.588Z,1516409278.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:58.602Z,1516409278.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:58.984Z,1516409278.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:59.002Z,1516409279.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:59.387Z,1516409279.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:59.401Z,1516409279.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:47:59.789Z,1516409279.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:47:59.803Z,1516409279.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:00.189Z,1516409280.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:00.203Z,1516409280.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:00.594Z,1516409280.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:00.608Z,1516409280.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:01.001Z,1516409281.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:01.015Z,1516409281.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:01.385Z,1516409281.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:01.399Z,1516409281.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:01.789Z,1516409281.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:01.803Z,1516409281.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:02.189Z,1516409282.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:02.203Z,1516409282.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:02.589Z,1516409282.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:02.603Z,1516409282.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:03.002Z,1516409283.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:03.016Z,1516409283.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:03.398Z,1516409283.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:03.412Z,1516409283.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:03.794Z,1516409283.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:03.808Z,1516409283.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:04.191Z,1516409284.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:04.206Z,1516409284.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:04.592Z,1516409284.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:04.607Z,1516409284.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:04.978Z,1516409284.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:04.998Z,1516409284.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:05.382Z,1516409285.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:05.415Z,1516409285.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:05.792Z,1516409285.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:05.807Z,1516409285.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:06.197Z,1516409286.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:06.211Z,1516409286.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:06.597Z,1516409286.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:06.611Z,1516409286.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:06.998Z,1516409286.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:07.019Z,1516409287.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:07.375Z,1516409287.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:07.406Z,1516409287.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:07.791Z,1516409287.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:07.808Z,1516409287.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:08.190Z,1516409288.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:08.204Z,1516409288.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:08.575Z,1516409288.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:08.607Z,1516409288.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:09.002Z,1516409289.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:09.016Z,1516409289.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:09.402Z,1516409289.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:09.416Z,1516409289.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:09.797Z,1516409289.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:09.811Z,1516409289.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:10.195Z,1516409290.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:10.215Z,1516409290.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:10.593Z,1516409290.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:10.607Z,1516409290.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:10.987Z,1516409290.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:11.002Z,1516409291.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:11.383Z,1516409291.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:11.406Z,1516409291.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:11.782Z,1516409291.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:11.814Z,1516409291.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:12.202Z,1516409292.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:12.223Z,1516409292.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:12.601Z,1516409292.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:12.619Z,1516409292.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:13.002Z,1516409293.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:13.023Z,1516409293.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:13.391Z,1516409293.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:13.411Z,1516409293.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:13.791Z,1516409293.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:13.811Z,1516409293.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:14.190Z,1516409294.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:14.204Z,1516409294.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:17.321Z,1516409297.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:17.347Z,1516409297.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:17.450Z,1516409297.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:17.490Z,1516409297.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:17.782Z,1516409297.782 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T00:48:17.782Z,1516409297.782 [NAL9602] Data Fault, FailCount= 5
2018-01-20T00:48:17.782Z,1516409297.782 [NAL9602](ERROR): Data Fault
2018-01-20T00:48:17.803Z,1516409297.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:17.829Z,1516409297.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:17.854Z,1516409297.854 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T00:48:17.855Z,1516409297.855 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-20T00:48:18.179Z,1516409298.179 [DataOverHttps](IMPORTANT): SBD MTMSN=20180120T004527
2018-01-20T00:48:18.194Z,1516409298.194 [NAL9602](INFO): Powering down
2018-01-20T00:48:18.212Z,1516409298.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:18.230Z,1516409298.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:18.276Z,1516409298.276 [CBIT](INFO): Critical error at 20180120T004817
2018-01-20T00:48:18.602Z,1516409298.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:18.616Z,1516409298.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:19.004Z,1516409299.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:19.023Z,1516409299.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:22.093Z,1516409302.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:22.107Z,1516409302.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:22.193Z,1516409302.193 [DataOverHttps](INFO): Received command:load Insert/AbortDrift.xml;set AbortDrift.AcousticTimeout 5 minute;run 
2018-01-20T00:48:22.205Z,1516409302.205 [CommandLine](IMPORTANT): got command load ./Missions/Insert/AbortDrift.xml
2018-01-20T00:48:22.205Z,1516409302.205 [MissionManager](INFO): Loading Mission: ./Missions/Insert/AbortDrift.xml
2018-01-20T00:48:22.264Z,1516409302.264 [MissionManager](INFO): DefineArg AbortDrift.AcousticTimeout = 96.000000 h
2018-01-20T00:48:22.267Z,1516409302.267 [MissionManager](INFO): DefineArg AbortDrift.FromLastAcousticReceiveToNow = nan h
2018-01-20T00:48:22.271Z,1516409302.271 [MissionManager](INFO): DefineArg AbortDrift.FromLastTimeFixToNow = nan h
2018-01-20T00:48:22.274Z,1516409302.274 [MissionManager](INFO): DefineArg AbortDrift.SyslogStop = 0 bool
2018-01-20T00:48:22.319Z,1516409302.319 [AbortDrift:D.Execute](DEBUG): Construct Execute.
2018-01-20T00:48:22.338Z,1516409302.338 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Aggregate xmlns="Tethys"
       xmlns:Guidance="Tethys/Guidance"
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="AbortDrift">

    <DefineArg Name="AcousticTimeout"><Description>
        Drifting for longer than this period without receiving any acoustic
        signals will trigger the abort.
    </Description><Units:hour/><Value>96</Value></DefineArg>

    <DefineArg Name="FromLastAcousticReceiveToNow"><Description>
        Elapsed time from last acoustic reception to now.
    </Description><Units:hour/><Value>NaN</Value></DefineArg>

    <DefineArg Name="FromLastTimeFixToNow"><Description>
        Elapsed time from last time_fix to now.
    </Description><Units:hour/><Value>NaN</Value></DefineArg>

    <DefineArg Name="SyslogStop"><Description>
        Flag of Syslog of stop.
    </Description><False/></DefineArg>

    <When>
        <Not><IsNaN>
            <Universal:acoustic_receive_time/>
        </IsNaN></Not>
        <And><Elapsed><Universal:acoustic_receive_time/></Elapsed><Gt><Arg Name="AcousticTimeout"/></Gt></And>
        <And><Elapsed><Universal:time_fix/></Elapsed><Gt><Arg Name="AcousticTimeout"/></Gt></And>
        <And><Not><Arg Name="SyslogStop"/></Not></And>
        <Or><IsNaN>
            <Universal:acoustic_receive_time/>
        </IsNaN><And><Elapsed><Universal:time_fix/></Elapsed><Gt><Arg Name="AcousticTimeout"/></Gt></And><And><Not><Arg Name="SyslogStop"/></Not></And></Or>
    </When>

    <Assign><Sequence/><Arg Name="FromLastTimeFixToNow"/><Elapsed><Universal:time_fix/></Elapsed></Assign>

    <Aggregate Id="TimeoutExpiredAcousticReceive">

        <Sequence/>

        <When>
            <Not><IsNaN>
                <Universal:acoustic_receive_time/>
            </IsNaN></Not>
        </When>

        <Assign><Sequence/><Arg Name="FromLastAcousticReceiveToNow"/><Elapsed><Universal:acoustic_receive_time/></Elapsed></Assign>

        <Syslog Severity="Important">Acoustic timeout <Arg Name="AcousticTimeout"/><Units:hour/> exceeded. Elapsed time since last acoustic reception = <Arg Name="FromLastAcousticReceiveToNow"/><Units:hour/>, Elapsed time since last time_fix = <Arg Name="FromLastTimeFixToNow"/><Units:hour/>. Aborting drift by executing stop command.</Syslog>

    </Aggregate>

    <Aggregate Id="TimeoutExpiredNoAcousticReceive">

        <Sequence/>

        <When>
            <IsNaN>
                <Universal:acoustic_receive_time/>
            </IsNaN>
        </When>

        <Syslog Severity="Important">Acoustic timeout <Arg Name="AcousticTimeout"/><Units:hour/> exceeded. No acoustic reception ever. Elapsed time since last time_fix = <Arg Name="FromLastTimeFixToNow"/><Units:hour/>. Aborting drift by executing stop command.</Syslog>

    </Aggregate>

    <Guidance:Execute>
        <Setting><Guidance:Execute.command/><String>stop</String></Setting>
    </Guidance:Execute>

    <Assign><Sequence/><Arg Name="SyslogStop"/><True/></Assign>

</Aggregate>


2018-01-20T00:48:22.339Z,1516409302.339 [CommandLine](IMPORTANT): Loaded ./Missions/Insert/AbortDrift.xml
2018-01-20T00:48:23.463Z,1516409303.463 [CommandLine](IMPORTANT): got command set AbortDrift.AcousticTimeout 5.000000 minute
2018-01-20T00:48:23.464Z,1516409303.464 [CommandLine](IMPORTANT): got command run 
2018-01-20T00:48:23.467Z,1516409303.467 [CommandLine](IMPORTANT): Running 
2018-01-20T00:48:23.552Z,1516409303.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:23.573Z,1516409303.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:23.576Z,1516409303.576 [Default] Stopped
2018-01-20T00:48:23.576Z,1516409303.576 [Default](DEBUG): Aggregate::uninitialize Default
2018-01-20T00:48:23.576Z,1516409303.576 [Default:B.GoToSurface] Stopped
2018-01-20T00:48:23.576Z,1516409303.576 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-01-20T00:48:23.576Z,1516409303.576 [Default:CheckIn] Stopped
2018-01-20T00:48:23.576Z,1516409303.576 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T00:48:23.576Z,1516409303.576 [Default:CheckIn:C.Wait] Stopped
2018-01-20T00:48:23.576Z,1516409303.576 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T00:48:23.577Z,1516409303.577 [MissionManager](IMPORTANT): Started mission AbortDrift
2018-01-20T00:48:23.577Z,1516409303.577 [AbortDrift] Running Loop=1
2018-01-20T00:48:23.577Z,1516409303.577 [AbortDrift](DEBUG): Aggregate::initialize AbortDrift
2018-01-20T00:48:23.577Z,1516409303.577 [AbortDrift:D.Execute] Running Loop=1
2018-01-20T00:48:23.577Z,1516409303.577 [AbortDrift:A] Running Loop=1
2018-01-20T00:48:23.578Z,1516409303.578 [AbortDrift:D.Execute] Running Loop=1
2018-01-20T00:48:23.578Z,1516409303.578 [AbortDrift:D.Execute](INFO): Executing command stop
2018-01-20T00:48:23.583Z,1516409303.583 [AbortDrift:TimeoutExpiredAcousticReceive] Running Loop=1
2018-01-20T00:48:23.583Z,1516409303.583 [AbortDrift:TimeoutExpiredAcousticReceive](DEBUG): Aggregate::initialize AbortDrift:TimeoutExpiredAcousticReceive
2018-01-20T00:48:23.584Z,1516409303.584 [AbortDrift:TimeoutExpiredAcousticReceive:A] Running Loop=1
2018-01-20T00:48:23.586Z,1516409303.586 [AbortDrift:TimeoutExpiredAcousticReceive:A] Stopped
2018-01-20T00:48:23.586Z,1516409303.586 [AbortDrift:TimeoutExpiredAcousticReceive:B] Running Loop=1
2018-01-20T00:48:23.589Z,1516409303.589 [AbortDrift:A] Stopped
2018-01-20T00:48:23.589Z,1516409303.589 [AbortDrift:E] Running Loop=1
2018-01-20T00:48:23.666Z,1516409303.666 [CommandLine](IMPORTANT): got command stop
2018-01-20T00:48:23.666Z,1516409303.666 [CommandLine](IMPORTANT): Scheduling is paused
2018-01-20T00:48:23.666Z,1516409303.666 [Supervisor](INFO): Stop Mission called by CommandLine::commandStop
2018-01-20T00:48:23.675Z,1516409303.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:23.723Z,1516409303.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:23.732Z,1516409303.732 [AbortDrift:E] Stopped
2018-01-20T00:48:23.738Z,1516409303.738 [AbortDrift:TimeoutExpiredAcousticReceive:B](IMPORTANT): Acoustic timeout 0.083333 h exceeded. Elapsed time since last acoustic reception = 3.240039 h , Elapsed time since last time_fix = 430237.440000 h . Aborting drift by executing stop command.
2018-01-20T00:48:23.740Z,1516409303.740 [AbortDrift:TimeoutExpiredAcousticReceive:B] Stopped
2018-01-20T00:48:23.740Z,1516409303.740 [AbortDrift:TimeoutExpiredAcousticReceive](INFO): Completed AbortDrift:TimeoutExpiredAcousticReceive
2018-01-20T00:48:23.740Z,1516409303.740 [AbortDrift:TimeoutExpiredAcousticReceive] Stopped
2018-01-20T00:48:23.740Z,1516409303.740 [AbortDrift:TimeoutExpiredAcousticReceive](DEBUG): Aggregate::uninitialize AbortDrift:TimeoutExpiredAcousticReceive
2018-01-20T00:48:23.745Z,1516409303.745 [AbortDrift](INFO): Completed AbortDrift
2018-01-20T00:48:23.745Z,1516409303.745 [MissionManager](INFO): MissionManager is completed.
2018-01-20T00:48:23.745Z,1516409303.745 [MissionManager](INFO): Uninitializing Mission AbortDrift
2018-01-20T00:48:23.745Z,1516409303.745 [AbortDrift] Stopped
2018-01-20T00:48:23.745Z,1516409303.745 [AbortDrift](DEBUG): Aggregate::uninitialize AbortDrift
2018-01-20T00:48:23.745Z,1516409303.745 [AbortDrift:D.Execute] Stopped
2018-01-20T00:48:24.047Z,1516409304.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:24.062Z,1516409304.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:24.064Z,1516409304.064 [MissionManager](IMPORTANT): Started mission Default
2018-01-20T00:48:24.065Z,1516409304.065 [Default] Running Loop=1
2018-01-20T00:48:24.065Z,1516409304.065 [Default](DEBUG): Aggregate::initialize Default
2018-01-20T00:48:24.065Z,1516409304.065 [Default:B.GoToSurface] Running Loop=1
2018-01-20T00:48:24.065Z,1516409304.065 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-01-20T00:48:24.066Z,1516409304.066 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-01-20T00:48:24.066Z,1516409304.066 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-01-20T00:48:24.066Z,1516409304.066 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-01-20T00:48:24.067Z,1516409304.067 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2018-01-20T00:48:24.067Z,1516409304.067 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-01-20T00:48:24.067Z,1516409304.067 [Default:A.Wait] Running Loop=1
2018-01-20T00:48:24.067Z,1516409304.067 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-01-20T00:48:24.434Z,1516409304.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:24.454Z,1516409304.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:24.835Z,1516409304.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:24.850Z,1516409304.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:25.234Z,1516409305.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:25.255Z,1516409305.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:25.634Z,1516409305.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:25.648Z,1516409305.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:26.041Z,1516409306.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:26.055Z,1516409306.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:26.437Z,1516409306.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:26.455Z,1516409306.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:26.841Z,1516409306.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:26.855Z,1516409306.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:27.235Z,1516409307.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:27.250Z,1516409307.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:27.634Z,1516409307.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:27.655Z,1516409307.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:28.034Z,1516409308.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:28.054Z,1516409308.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:28.441Z,1516409308.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:28.455Z,1516409308.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:28.837Z,1516409308.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:28.855Z,1516409308.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:29.233Z,1516409309.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:29.247Z,1516409309.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:29.634Z,1516409309.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:29.648Z,1516409309.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:30.050Z,1516409310.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:30.064Z,1516409310.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:30.431Z,1516409310.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:30.455Z,1516409310.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:30.828Z,1516409310.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:30.853Z,1516409310.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:31.231Z,1516409311.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:31.262Z,1516409311.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:31.642Z,1516409311.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:31.656Z,1516409311.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:32.042Z,1516409312.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:32.056Z,1516409312.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:32.431Z,1516409312.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:32.461Z,1516409312.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:32.834Z,1516409312.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:32.859Z,1516409312.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:33.224Z,1516409313.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:33.246Z,1516409313.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:33.631Z,1516409313.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:33.665Z,1516409313.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:34.034Z,1516409314.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:34.068Z,1516409314.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:34.428Z,1516409314.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:34.442Z,1516409314.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:34.831Z,1516409314.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:34.845Z,1516409314.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:35.235Z,1516409315.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:35.273Z,1516409315.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:35.626Z,1516409315.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:35.640Z,1516409315.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:36.043Z,1516409316.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:36.073Z,1516409316.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:36.435Z,1516409316.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:36.473Z,1516409316.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:36.827Z,1516409316.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:36.842Z,1516409316.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:37.243Z,1516409317.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:37.272Z,1516409317.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:37.276Z,1516409317.276 [Default:A.Wait](INFO): Done Waiting.
2018-01-20T00:48:37.276Z,1516409317.276 [Default:A.Wait] Stopped
2018-01-20T00:48:37.276Z,1516409317.276 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T00:48:37.636Z,1516409317.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:37.673Z,1516409317.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:37.677Z,1516409317.677 [Default:CheckIn] Running Loop=1
2018-01-20T00:48:37.677Z,1516409317.677 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T00:48:37.677Z,1516409317.677 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T00:48:38.038Z,1516409318.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:38.052Z,1516409318.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:38.439Z,1516409318.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:38.453Z,1516409318.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:38.838Z,1516409318.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:38.852Z,1516409318.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:39.232Z,1516409319.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:39.246Z,1516409319.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:39.643Z,1516409319.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:39.657Z,1516409319.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:40.040Z,1516409320.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:40.054Z,1516409320.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:40.436Z,1516409320.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:40.451Z,1516409320.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:40.840Z,1516409320.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:40.859Z,1516409320.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:41.236Z,1516409321.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:41.250Z,1516409321.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:41.638Z,1516409321.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:41.652Z,1516409321.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:42.042Z,1516409322.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:42.056Z,1516409322.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:42.436Z,1516409322.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:42.450Z,1516409322.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:42.835Z,1516409322.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:42.850Z,1516409322.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:43.241Z,1516409323.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:43.255Z,1516409323.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:43.641Z,1516409323.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:43.655Z,1516409323.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:44.036Z,1516409324.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:44.051Z,1516409324.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:44.440Z,1516409324.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:44.455Z,1516409324.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:44.834Z,1516409324.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:44.848Z,1516409324.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:45.236Z,1516409325.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:45.250Z,1516409325.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:45.639Z,1516409325.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:45.654Z,1516409325.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:46.039Z,1516409326.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:46.052Z,1516409326.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:46.441Z,1516409326.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:46.455Z,1516409326.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:46.841Z,1516409326.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:46.862Z,1516409326.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:47.240Z,1516409327.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:47.254Z,1516409327.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:47.640Z,1516409327.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:47.654Z,1516409327.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:48.038Z,1516409328.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:48.051Z,1516409328.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:48.440Z,1516409328.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:48.454Z,1516409328.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:48.835Z,1516409328.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:48.850Z,1516409328.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:49.247Z,1516409329.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:49.261Z,1516409329.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:49.639Z,1516409329.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:49.654Z,1516409329.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:50.039Z,1516409330.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:50.054Z,1516409330.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:50.439Z,1516409330.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:50.453Z,1516409330.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:50.839Z,1516409330.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:50.853Z,1516409330.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:51.236Z,1516409331.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:51.250Z,1516409331.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:51.639Z,1516409331.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:51.653Z,1516409331.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:52.039Z,1516409332.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:52.053Z,1516409332.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:52.439Z,1516409332.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:52.454Z,1516409332.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:52.839Z,1516409332.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:52.853Z,1516409332.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:53.239Z,1516409333.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:53.253Z,1516409333.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:53.638Z,1516409333.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:53.652Z,1516409333.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:54.034Z,1516409334.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:54.061Z,1516409334.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:54.441Z,1516409334.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:54.455Z,1516409334.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:54.835Z,1516409334.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:54.849Z,1516409334.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:55.237Z,1516409335.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:55.254Z,1516409335.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:55.641Z,1516409335.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:55.655Z,1516409335.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:56.041Z,1516409336.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:56.055Z,1516409336.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:56.441Z,1516409336.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:56.454Z,1516409336.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:56.841Z,1516409336.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:56.855Z,1516409336.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:57.235Z,1516409337.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:57.251Z,1516409337.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:57.634Z,1516409337.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:57.654Z,1516409337.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:58.041Z,1516409338.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:58.069Z,1516409338.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:58.441Z,1516409338.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:58.455Z,1516409338.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:58.838Z,1516409338.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:58.852Z,1516409338.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:59.230Z,1516409339.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:59.263Z,1516409339.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:48:59.628Z,1516409339.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:48:59.661Z,1516409339.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:00.026Z,1516409340.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:00.061Z,1516409340.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:00.434Z,1516409340.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:00.459Z,1516409340.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:00.825Z,1516409340.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:00.847Z,1516409340.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:01.230Z,1516409341.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:01.262Z,1516409341.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:01.634Z,1516409341.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:01.659Z,1516409341.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:02.028Z,1516409342.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:02.054Z,1516409342.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:02.426Z,1516409342.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:02.440Z,1516409342.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:02.832Z,1516409342.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:02.918Z,1516409342.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:03.230Z,1516409343.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:03.244Z,1516409343.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:03.644Z,1516409343.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:03.681Z,1516409343.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:04.040Z,1516409344.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:04.082Z,1516409344.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:04.435Z,1516409344.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:04.483Z,1516409344.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:04.840Z,1516409344.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:04.889Z,1516409344.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:05.239Z,1516409345.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:05.253Z,1516409345.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:05.635Z,1516409345.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:05.688Z,1516409345.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:06.040Z,1516409346.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:06.066Z,1516409346.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:06.454Z,1516409346.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:06.518Z,1516409346.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:06.839Z,1516409346.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:06.865Z,1516409346.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:07.232Z,1516409347.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:07.296Z,1516409347.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:07.662Z,1516409347.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:07.709Z,1516409347.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:08.032Z,1516409348.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:08.070Z,1516409348.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:08.432Z,1516409348.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:08.500Z,1516409348.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:08.877Z,1516409348.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:08.959Z,1516409348.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:09.231Z,1516409349.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:09.279Z,1516409349.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:09.632Z,1516409349.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:09.686Z,1516409349.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:10.033Z,1516409350.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:10.075Z,1516409350.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:10.432Z,1516409350.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:10.470Z,1516409350.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:10.832Z,1516409350.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:10.879Z,1516409350.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:11.233Z,1516409351.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:11.275Z,1516409351.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:11.631Z,1516409351.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:11.671Z,1516409351.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:12.045Z,1516409352.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:12.102Z,1516409352.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:12.432Z,1516409352.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:12.470Z,1516409352.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:12.832Z,1516409352.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:12.871Z,1516409352.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:13.230Z,1516409353.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:13.272Z,1516409353.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:13.635Z,1516409353.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:13.665Z,1516409353.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:14.035Z,1516409354.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:14.050Z,1516409354.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:14.438Z,1516409354.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:14.452Z,1516409354.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:14.832Z,1516409354.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:14.847Z,1516409354.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:15.238Z,1516409355.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:15.252Z,1516409355.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:15.294Z,1516409355.294 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T00:49:15.638Z,1516409355.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:15.652Z,1516409355.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:16.032Z,1516409356.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:16.047Z,1516409356.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:16.438Z,1516409356.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:16.452Z,1516409356.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:16.834Z,1516409356.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:16.848Z,1516409356.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:17.239Z,1516409357.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:17.253Z,1516409357.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:17.634Z,1516409357.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:17.648Z,1516409357.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:18.038Z,1516409358.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:18.052Z,1516409358.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:18.438Z,1516409358.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:18.452Z,1516409358.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:18.837Z,1516409358.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:18.851Z,1516409358.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:19.238Z,1516409359.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:19.251Z,1516409359.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:22.352Z,1516409362.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:22.377Z,1516409362.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:22.480Z,1516409362.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:22.520Z,1516409362.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:22.834Z,1516409362.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:22.848Z,1516409362.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:23.232Z,1516409363.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:23.246Z,1516409363.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:23.630Z,1516409363.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:23.644Z,1516409363.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:24.026Z,1516409364.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:24.040Z,1516409364.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:24.432Z,1516409364.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:24.446Z,1516409364.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:24.832Z,1516409364.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:24.846Z,1516409364.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:25.231Z,1516409365.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:25.250Z,1516409365.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:25.627Z,1516409365.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:25.642Z,1516409365.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:26.031Z,1516409366.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:26.046Z,1516409366.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:26.429Z,1516409366.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:26.443Z,1516409366.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:26.827Z,1516409366.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:26.842Z,1516409366.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:27.231Z,1516409367.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:27.246Z,1516409367.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:27.631Z,1516409367.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:27.650Z,1516409367.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:28.031Z,1516409368.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:28.045Z,1516409368.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:28.431Z,1516409368.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:28.446Z,1516409368.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:28.829Z,1516409368.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:28.846Z,1516409368.846 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:28.847Z,1516409368.847 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-01-20T00:49:28.847Z,1516409368.847 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:49:28.848Z,1516409368.848 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:28.848Z,1516409368.848 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-01-20T00:49:28.849Z,1516409368.849 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:49:28.850Z,1516409368.850 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:28.850Z,1516409368.850 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 73
2018-01-20T00:49:28.850Z,1516409368.850 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:49:28.899Z,1516409368.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:49:28.899Z,1516409368.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:49:28.900Z,1516409368.900 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:49:29.229Z,1516409369.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:29.252Z,1516409369.252 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:49:29.252Z,1516409369.252 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-01-20T00:49:29.253Z,1516409369.253 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:49:29.253Z,1516409369.253 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-01-20T00:49:29.253Z,1516409369.253 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:49:29.253Z,1516409369.253 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 73
2018-01-20T00:49:29.630Z,1516409369.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:29.643Z,1516409369.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:49:29.643Z,1516409369.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:49:29.644Z,1516409369.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:49:29.644Z,1516409369.644 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:49:29.644Z,1516409369.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:49:29.645Z,1516409369.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:49:29.645Z,1516409369.645 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:49:29.646Z,1516409369.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:49:29.646Z,1516409369.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:49:30.030Z,1516409370.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:30.050Z,1516409370.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:49:30.051Z,1516409370.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:30.434Z,1516409370.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:30.447Z,1516409370.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:49:30.448Z,1516409370.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:30.834Z,1516409370.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:30.848Z,1516409370.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:49:30.849Z,1516409370.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:31.229Z,1516409371.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:31.250Z,1516409371.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:49:31.251Z,1516409371.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:31.634Z,1516409371.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:31.647Z,1516409371.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:49:31.648Z,1516409371.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:32.034Z,1516409372.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:32.047Z,1516409372.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:49:32.048Z,1516409372.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:32.427Z,1516409372.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:32.463Z,1516409372.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:49:32.464Z,1516409372.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:32.820Z,1516409372.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:32.844Z,1516409372.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:49:32.845Z,1516409372.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:33.230Z,1516409373.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:33.244Z,1516409373.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:49:33.244Z,1516409373.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:33.630Z,1516409373.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:33.650Z,1516409373.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:49:33.651Z,1516409373.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:34.034Z,1516409374.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:34.048Z,1516409374.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:49:34.049Z,1516409374.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:34.434Z,1516409374.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:34.447Z,1516409374.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:49:34.448Z,1516409374.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:34.830Z,1516409374.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:34.850Z,1516409374.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:49:34.851Z,1516409374.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:35.216Z,1516409375.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:35.249Z,1516409375.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:49:35.250Z,1516409375.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:35.629Z,1516409375.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:35.651Z,1516409375.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:49:35.652Z,1516409375.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:36.033Z,1516409376.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:36.047Z,1516409376.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:49:36.048Z,1516409376.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:36.434Z,1516409376.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:36.447Z,1516409376.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:49:36.448Z,1516409376.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:36.834Z,1516409376.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:36.848Z,1516409376.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:49:36.849Z,1516409376.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:37.224Z,1516409377.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:37.259Z,1516409377.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:49:37.260Z,1516409377.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:37.622Z,1516409377.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:37.647Z,1516409377.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:49:37.648Z,1516409377.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:38.034Z,1516409378.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:38.047Z,1516409378.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:49:38.048Z,1516409378.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:38.422Z,1516409378.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:38.450Z,1516409378.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:49:38.451Z,1516409378.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:38.819Z,1516409378.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:38.843Z,1516409378.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:49:38.844Z,1516409378.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:39.239Z,1516409379.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:39.252Z,1516409379.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:49:39.253Z,1516409379.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:39.632Z,1516409379.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:39.650Z,1516409379.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:49:39.651Z,1516409379.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:40.031Z,1516409380.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:40.045Z,1516409380.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:49:40.046Z,1516409380.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:40.435Z,1516409380.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:40.448Z,1516409380.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:49:40.450Z,1516409380.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:40.831Z,1516409380.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:40.845Z,1516409380.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:49:40.846Z,1516409380.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:41.227Z,1516409381.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:41.240Z,1516409381.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:49:41.241Z,1516409381.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:41.632Z,1516409381.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:41.707Z,1516409381.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-01-20T00:49:41.708Z,1516409381.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:42.034Z,1516409382.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:42.047Z,1516409382.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:49:42.048Z,1516409382.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:42.434Z,1516409382.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:42.447Z,1516409382.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:49:42.448Z,1516409382.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:42.832Z,1516409382.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:42.850Z,1516409382.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:49:42.851Z,1516409382.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:43.231Z,1516409383.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:43.245Z,1516409383.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:49:43.246Z,1516409383.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:43.634Z,1516409383.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:43.647Z,1516409383.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:49:43.648Z,1516409383.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:44.035Z,1516409384.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:44.048Z,1516409384.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:49:44.050Z,1516409384.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:44.431Z,1516409384.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:44.450Z,1516409384.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:49:44.451Z,1516409384.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:44.827Z,1516409384.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:44.861Z,1516409384.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:49:44.862Z,1516409384.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:45.238Z,1516409385.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:45.252Z,1516409385.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:49:45.252Z,1516409385.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:45.638Z,1516409385.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:45.651Z,1516409385.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:49:45.652Z,1516409385.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:46.034Z,1516409386.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:46.048Z,1516409386.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:49:46.049Z,1516409386.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:46.434Z,1516409386.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:46.448Z,1516409386.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:49:46.449Z,1516409386.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:46.828Z,1516409386.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:46.851Z,1516409386.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:49:46.852Z,1516409386.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:47.230Z,1516409387.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:47.243Z,1516409387.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:49:47.244Z,1516409387.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:47.635Z,1516409387.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:47.654Z,1516409387.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:49:47.655Z,1516409387.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:48.034Z,1516409388.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:48.048Z,1516409388.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:49:48.049Z,1516409388.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:48.437Z,1516409388.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:48.450Z,1516409388.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:49:48.451Z,1516409388.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:48.838Z,1516409388.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:48.852Z,1516409388.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:49.235Z,1516409389.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:49.255Z,1516409389.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:49.633Z,1516409389.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:49.647Z,1516409389.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:50.037Z,1516409390.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:50.051Z,1516409390.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:50.438Z,1516409390.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:50.452Z,1516409390.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:50.828Z,1516409390.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:50.841Z,1516409390.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:51.231Z,1516409391.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:51.251Z,1516409391.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:51.636Z,1516409391.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:51.651Z,1516409391.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:52.038Z,1516409392.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:52.051Z,1516409392.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:52.436Z,1516409392.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:52.455Z,1516409392.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:52.834Z,1516409392.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:52.855Z,1516409392.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:53.236Z,1516409393.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:53.251Z,1516409393.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:53.638Z,1516409393.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:53.652Z,1516409393.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:54.033Z,1516409394.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:54.047Z,1516409394.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:54.428Z,1516409394.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:54.446Z,1516409394.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:54.828Z,1516409394.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:54.867Z,1516409394.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:55.237Z,1516409395.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:55.244Z,1516409395.244 [PNI_TCM](ERROR): CRC does not match. Expected:0x8894 got:0x19442
2018-01-20T00:49:55.286Z,1516409395.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:55.635Z,1516409395.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:55.648Z,1516409395.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:56.032Z,1516409396.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:56.050Z,1516409396.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:56.429Z,1516409396.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:56.479Z,1516409396.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:56.829Z,1516409396.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:56.839Z,1516409396.839 [PNI_TCM](ERROR): CRC does not match. Expected:0x46109 got:0x27933
2018-01-20T00:49:56.859Z,1516409396.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:57.229Z,1516409397.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:57.255Z,1516409397.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:57.638Z,1516409397.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:57.659Z,1516409397.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:58.035Z,1516409398.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:58.063Z,1516409398.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:58.439Z,1516409398.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:58.446Z,1516409398.446 [PNI_TCM](ERROR): CRC does not match. Expected:0x566 got:0x1307
2018-01-20T00:49:58.488Z,1516409398.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:58.843Z,1516409398.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:58.857Z,1516409398.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:59.237Z,1516409399.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:59.252Z,1516409399.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:49:59.635Z,1516409399.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:49:59.667Z,1516409399.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:00.033Z,1516409400.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:00.042Z,1516409400.042 [PNI_TCM](ERROR): CRC does not match. Expected:0x53138 got:0x17164
2018-01-20T00:50:00.087Z,1516409400.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:00.440Z,1516409400.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:00.454Z,1516409400.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:00.833Z,1516409400.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:00.847Z,1516409400.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:01.227Z,1516409401.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:01.255Z,1516409401.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:01.637Z,1516409401.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:01.653Z,1516409401.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:02.020Z,1516409402.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:02.051Z,1516409402.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:02.431Z,1516409402.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:02.452Z,1516409402.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:02.818Z,1516409402.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:02.858Z,1516409402.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:03.220Z,1516409403.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:03.250Z,1516409403.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:03.637Z,1516409403.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:03.652Z,1516409403.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:04.043Z,1516409404.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:04.059Z,1516409404.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:04.434Z,1516409404.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:04.467Z,1516409404.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:04.834Z,1516409404.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:04.852Z,1516409404.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:05.236Z,1516409405.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:05.251Z,1516409405.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:05.638Z,1516409405.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:05.652Z,1516409405.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:06.034Z,1516409406.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:06.068Z,1516409406.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:06.418Z,1516409406.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:06.454Z,1516409406.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:06.820Z,1516409406.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:06.849Z,1516409406.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:07.227Z,1516409407.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:07.251Z,1516409407.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:07.634Z,1516409407.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:07.663Z,1516409407.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:08.020Z,1516409408.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:08.046Z,1516409408.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:08.426Z,1516409408.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:08.454Z,1516409408.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:08.837Z,1516409408.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:08.851Z,1516409408.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:09.220Z,1516409409.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:09.261Z,1516409409.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:09.634Z,1516409409.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:09.650Z,1516409409.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:10.018Z,1516409410.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:10.051Z,1516409410.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:10.438Z,1516409410.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:10.452Z,1516409410.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:10.823Z,1516409410.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:10.866Z,1516409410.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:11.234Z,1516409411.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:11.247Z,1516409411.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:11.634Z,1516409411.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:11.652Z,1516409411.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:12.023Z,1516409412.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:12.055Z,1516409412.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:12.418Z,1516409412.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:12.450Z,1516409412.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:12.820Z,1516409412.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:12.850Z,1516409412.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:13.223Z,1516409413.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:13.254Z,1516409413.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:13.626Z,1516409413.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:13.655Z,1516409413.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:14.026Z,1516409414.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:14.074Z,1516409414.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:14.427Z,1516409414.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:14.451Z,1516409414.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:14.826Z,1516409414.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:14.855Z,1516409414.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:15.220Z,1516409415.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:15.248Z,1516409415.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:15.623Z,1516409415.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:15.653Z,1516409415.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:16.026Z,1516409416.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:16.061Z,1516409416.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:16.420Z,1516409416.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:16.434Z,1516409416.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:16.823Z,1516409416.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:16.838Z,1516409416.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:17.226Z,1516409417.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:17.240Z,1516409417.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:17.630Z,1516409417.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:17.644Z,1516409417.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:18.039Z,1516409418.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:18.070Z,1516409418.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:18.092Z,1516409418.092 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T00:50:18.092Z,1516409418.092 [NAL9602] No Fault, FailCount= 5
2018-01-20T00:50:18.415Z,1516409418.415 [NAL9602](INFO): Powering up NAL9602
2018-01-20T00:50:18.433Z,1516409418.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:18.452Z,1516409418.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:18.830Z,1516409418.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:18.844Z,1516409418.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:19.229Z,1516409419.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:19.247Z,1516409419.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:19.632Z,1516409419.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:19.646Z,1516409419.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:22.727Z,1516409422.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:22.742Z,1516409422.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:22.836Z,1516409422.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:22.879Z,1516409422.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:23.195Z,1516409423.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:23.228Z,1516409423.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:23.595Z,1516409423.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:23.631Z,1516409423.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:23.988Z,1516409423.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:24.003Z,1516409424.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:24.395Z,1516409424.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:24.428Z,1516409424.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:24.784Z,1516409424.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:24.798Z,1516409424.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:25.193Z,1516409425.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:25.207Z,1516409425.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:25.588Z,1516409425.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:25.603Z,1516409425.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:25.995Z,1516409425.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:26.009Z,1516409426.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:26.389Z,1516409426.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:26.407Z,1516409426.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:26.795Z,1516409426.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:26.815Z,1516409426.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:27.194Z,1516409427.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:27.208Z,1516409427.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:27.592Z,1516409427.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:27.611Z,1516409427.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:27.994Z,1516409427.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:28.008Z,1516409428.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:28.391Z,1516409428.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:28.410Z,1516409428.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:28.790Z,1516409428.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:28.804Z,1516409428.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:29.210Z,1516409429.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:29.231Z,1516409429.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:29.566Z,1516409429.566 [NAL9602](INFO): NAL9602 initialized
2018-01-20T00:50:29.592Z,1516409429.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:29.615Z,1516409429.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:29.993Z,1516409429.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:30.008Z,1516409430.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:30.403Z,1516409430.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:30.417Z,1516409430.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:30.802Z,1516409430.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:30.823Z,1516409430.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:31.205Z,1516409431.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:31.220Z,1516409431.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:31.597Z,1516409431.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:31.611Z,1516409431.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:31.996Z,1516409431.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:32.022Z,1516409432.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:32.400Z,1516409432.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:32.414Z,1516409432.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:32.790Z,1516409432.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:32.822Z,1516409432.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:33.203Z,1516409433.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:33.218Z,1516409433.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:33.607Z,1516409433.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:33.621Z,1516409433.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:34.007Z,1516409434.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:34.022Z,1516409434.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:34.384Z,1516409434.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:34.419Z,1516409434.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:34.788Z,1516409434.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:34.813Z,1516409434.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:35.189Z,1516409435.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:35.219Z,1516409435.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:35.592Z,1516409435.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:35.623Z,1516409435.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:35.995Z,1516409435.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:36.027Z,1516409436.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:36.406Z,1516409436.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:36.436Z,1516409436.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:36.810Z,1516409436.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:36.830Z,1516409436.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:37.191Z,1516409437.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:37.222Z,1516409437.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:37.591Z,1516409437.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:37.623Z,1516409437.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:37.983Z,1516409437.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:37.998Z,1516409437.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:38.384Z,1516409438.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:38.398Z,1516409438.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:38.795Z,1516409438.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:38.834Z,1516409438.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:39.206Z,1516409439.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:39.231Z,1516409439.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:39.606Z,1516409439.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:39.629Z,1516409439.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:40.006Z,1516409440.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:40.028Z,1516409440.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:40.395Z,1516409440.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:40.431Z,1516409440.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:40.795Z,1516409440.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:40.809Z,1516409440.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:41.193Z,1516409441.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:41.207Z,1516409441.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:41.595Z,1516409441.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:41.615Z,1516409441.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:42.010Z,1516409442.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:42.039Z,1516409442.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:42.406Z,1516409442.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:42.420Z,1516409442.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:42.810Z,1516409442.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:42.824Z,1516409442.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:43.191Z,1516409443.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:43.206Z,1516409443.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:43.594Z,1516409443.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:43.613Z,1516409443.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:43.999Z,1516409443.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:44.019Z,1516409444.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:44.399Z,1516409444.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:44.413Z,1516409444.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:44.796Z,1516409444.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:44.810Z,1516409444.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:45.203Z,1516409445.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:45.217Z,1516409445.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:45.602Z,1516409445.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:45.616Z,1516409445.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:46.002Z,1516409446.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:46.016Z,1516409446.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:46.399Z,1516409446.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:46.419Z,1516409446.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:46.798Z,1516409446.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:46.812Z,1516409446.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:47.194Z,1516409447.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:47.221Z,1516409447.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:47.599Z,1516409447.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:47.619Z,1516409447.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:48.004Z,1516409448.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:48.019Z,1516409448.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:48.406Z,1516409448.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:48.420Z,1516409448.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:48.805Z,1516409448.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:48.819Z,1516409448.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:49.199Z,1516409449.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:49.213Z,1516409449.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:49.594Z,1516409449.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:49.613Z,1516409449.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:49.986Z,1516409449.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:50.016Z,1516409450.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:50.399Z,1516409450.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:50.414Z,1516409450.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:50.803Z,1516409450.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:50.818Z,1516409450.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:51.199Z,1516409451.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:51.220Z,1516409451.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:51.605Z,1516409451.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:51.619Z,1516409451.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:52.005Z,1516409452.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:52.028Z,1516409452.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:52.383Z,1516409452.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:52.410Z,1516409452.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:52.783Z,1516409452.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:52.815Z,1516409452.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:53.188Z,1516409453.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:53.214Z,1516409453.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:53.583Z,1516409453.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:53.615Z,1516409453.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:54.001Z,1516409454.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:54.016Z,1516409454.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:54.409Z,1516409454.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:54.423Z,1516409454.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:54.810Z,1516409454.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:54.824Z,1516409454.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:55.183Z,1516409455.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:55.218Z,1516409455.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:55.587Z,1516409455.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:55.623Z,1516409455.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:55.991Z,1516409455.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:56.023Z,1516409456.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:56.392Z,1516409456.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:56.422Z,1516409456.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:56.787Z,1516409456.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:56.819Z,1516409456.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:57.202Z,1516409457.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:57.228Z,1516409457.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:57.602Z,1516409457.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:57.627Z,1516409457.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:57.998Z,1516409457.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:58.024Z,1516409458.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:58.386Z,1516409458.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:58.403Z,1516409458.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:58.792Z,1516409458.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:58.806Z,1516409458.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:59.196Z,1516409459.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:59.227Z,1516409459.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:50:59.595Z,1516409459.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:50:59.631Z,1516409459.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:00.002Z,1516409460.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:00.016Z,1516409460.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:00.406Z,1516409460.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:00.420Z,1516409460.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:00.811Z,1516409460.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:00.845Z,1516409460.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:01.198Z,1516409461.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:01.212Z,1516409461.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:01.596Z,1516409461.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:01.611Z,1516409461.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:01.999Z,1516409461.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:02.014Z,1516409462.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:02.391Z,1516409462.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:02.406Z,1516409462.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:02.796Z,1516409462.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:02.815Z,1516409462.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:03.203Z,1516409463.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:03.217Z,1516409463.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:03.602Z,1516409463.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:03.616Z,1516409463.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:04.002Z,1516409464.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:04.016Z,1516409464.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:04.400Z,1516409464.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:04.414Z,1516409464.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:04.799Z,1516409464.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:04.813Z,1516409464.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:05.194Z,1516409465.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:05.217Z,1516409465.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:05.594Z,1516409465.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:05.621Z,1516409465.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:06.013Z,1516409466.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:06.027Z,1516409466.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:06.412Z,1516409466.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:06.426Z,1516409466.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:06.801Z,1516409466.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:06.824Z,1516409466.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:07.183Z,1516409467.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:07.219Z,1516409467.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:07.583Z,1516409467.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:07.624Z,1516409467.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:07.984Z,1516409467.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:08.015Z,1516409468.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:08.388Z,1516409468.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:08.418Z,1516409468.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:08.792Z,1516409468.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:08.824Z,1516409468.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:09.211Z,1516409469.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:09.231Z,1516409469.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:09.598Z,1516409469.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:09.635Z,1516409469.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:10.014Z,1516409470.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:10.035Z,1516409470.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:10.394Z,1516409470.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:10.423Z,1516409470.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:10.795Z,1516409470.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:10.826Z,1516409470.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:11.196Z,1516409471.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:11.210Z,1516409471.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:11.595Z,1516409471.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:11.636Z,1516409471.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:12.002Z,1516409472.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:12.033Z,1516409472.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:12.406Z,1516409472.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:12.434Z,1516409472.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:12.806Z,1516409472.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:12.831Z,1516409472.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:13.192Z,1516409473.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:13.206Z,1516409473.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:13.593Z,1516409473.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:13.607Z,1516409473.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:13.996Z,1516409473.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:14.010Z,1516409474.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:14.391Z,1516409474.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:14.406Z,1516409474.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:14.790Z,1516409474.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:14.810Z,1516409474.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:15.211Z,1516409475.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:15.240Z,1516409475.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:15.598Z,1516409475.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:15.613Z,1516409475.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:16.011Z,1516409476.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:16.039Z,1516409476.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:16.392Z,1516409476.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:16.407Z,1516409476.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:16.790Z,1516409476.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:16.804Z,1516409476.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:17.191Z,1516409477.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:17.205Z,1516409477.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:17.596Z,1516409477.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:17.611Z,1516409477.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:17.994Z,1516409477.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:18.008Z,1516409478.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:18.410Z,1516409478.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:18.447Z,1516409478.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:18.803Z,1516409478.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:18.817Z,1516409478.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:19.198Z,1516409479.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:19.212Z,1516409479.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:19.592Z,1516409479.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:19.606Z,1516409479.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:20.000Z,1516409480.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:20.019Z,1516409480.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:23.090Z,1516409483.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:23.105Z,1516409483.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:23.216Z,1516409483.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:23.251Z,1516409483.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:23.570Z,1516409483.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:23.600Z,1516409483.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:23.978Z,1516409483.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:24.001Z,1516409484.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:24.371Z,1516409484.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:24.405Z,1516409484.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:24.756Z,1516409484.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:24.775Z,1516409484.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:25.161Z,1516409485.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:25.175Z,1516409485.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:25.556Z,1516409485.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:25.571Z,1516409485.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:25.974Z,1516409485.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:26.004Z,1516409486.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:26.370Z,1516409486.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:26.383Z,1516409486.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:26.762Z,1516409486.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:26.776Z,1516409486.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:27.161Z,1516409487.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:27.175Z,1516409487.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:27.560Z,1516409487.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:27.574Z,1516409487.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:27.961Z,1516409487.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:27.975Z,1516409487.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:28.374Z,1516409488.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:28.404Z,1516409488.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:28.762Z,1516409488.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:28.783Z,1516409488.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:29.158Z,1516409489.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:29.172Z,1516409489.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:29.557Z,1516409489.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:29.575Z,1516409489.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:29.967Z,1516409489.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:30.014Z,1516409490.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:30.372Z,1516409490.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:30.391Z,1516409490.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:30.773Z,1516409490.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:30.787Z,1516409490.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:31.165Z,1516409491.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:31.178Z,1516409491.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:31.563Z,1516409491.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:31.577Z,1516409491.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:31.969Z,1516409491.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:31.983Z,1516409491.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:32.370Z,1516409492.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:32.390Z,1516409492.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:32.762Z,1516409492.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:32.785Z,1516409492.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:33.164Z,1516409493.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:33.178Z,1516409493.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:33.547Z,1516409493.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:33.573Z,1516409493.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:33.961Z,1516409493.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:33.992Z,1516409493.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:34.376Z,1516409494.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:34.395Z,1516409494.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:34.774Z,1516409494.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:34.788Z,1516409494.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:35.164Z,1516409495.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:35.178Z,1516409495.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:35.551Z,1516409495.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:35.583Z,1516409495.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:35.970Z,1516409495.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:35.984Z,1516409495.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:36.375Z,1516409496.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:36.395Z,1516409496.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:36.773Z,1516409496.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:36.787Z,1516409496.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:37.148Z,1516409497.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:37.182Z,1516409497.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:37.563Z,1516409497.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:37.583Z,1516409497.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:37.970Z,1516409497.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:37.991Z,1516409497.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:38.377Z,1516409498.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:38.391Z,1516409498.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:38.762Z,1516409498.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:38.791Z,1516409498.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:39.164Z,1516409499.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:39.178Z,1516409499.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:39.547Z,1516409499.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:39.575Z,1516409499.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:39.966Z,1516409499.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:39.987Z,1516409499.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:40.377Z,1516409500.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:40.391Z,1516409500.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:40.775Z,1516409500.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:40.789Z,1516409500.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:41.165Z,1516409501.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:41.179Z,1516409501.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:41.552Z,1516409501.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:41.583Z,1516409501.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:41.966Z,1516409501.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:41.985Z,1516409501.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:42.377Z,1516409502.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:42.391Z,1516409502.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:42.771Z,1516409502.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:42.786Z,1516409502.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:43.148Z,1516409503.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:43.184Z,1516409503.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:43.565Z,1516409503.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:43.579Z,1516409503.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:43.975Z,1516409503.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:43.989Z,1516409503.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:44.376Z,1516409504.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:44.390Z,1516409504.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:44.766Z,1516409504.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:44.788Z,1516409504.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:45.152Z,1516409505.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:45.184Z,1516409505.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:45.556Z,1516409505.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:45.583Z,1516409505.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:45.962Z,1516409505.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:45.995Z,1516409505.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:46.378Z,1516409506.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:46.393Z,1516409506.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:46.775Z,1516409506.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:46.789Z,1516409506.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:47.156Z,1516409507.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:47.182Z,1516409507.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:47.552Z,1516409507.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:47.578Z,1516409507.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:47.969Z,1516409507.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:47.993Z,1516409507.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:48.378Z,1516409508.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:48.392Z,1516409508.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:48.774Z,1516409508.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:48.788Z,1516409508.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:49.148Z,1516409509.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:49.179Z,1516409509.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:49.556Z,1516409509.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:49.582Z,1516409509.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:49.971Z,1516409509.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:49.991Z,1516409509.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:50.380Z,1516409510.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:50.394Z,1516409510.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:50.762Z,1516409510.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:50.798Z,1516409510.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:51.156Z,1516409511.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:51.182Z,1516409511.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:51.547Z,1516409511.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:51.580Z,1516409511.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:51.970Z,1516409511.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:51.985Z,1516409511.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:52.374Z,1516409512.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:52.389Z,1516409512.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:52.769Z,1516409512.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:52.783Z,1516409512.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:53.156Z,1516409513.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:53.181Z,1516409513.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:53.551Z,1516409513.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:53.576Z,1516409513.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:53.962Z,1516409513.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:53.984Z,1516409513.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:54.377Z,1516409514.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:54.391Z,1516409514.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:54.774Z,1516409514.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:54.788Z,1516409514.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:55.156Z,1516409515.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:55.182Z,1516409515.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:55.555Z,1516409515.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:55.580Z,1516409515.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:55.970Z,1516409515.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:55.984Z,1516409515.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:56.370Z,1516409516.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:56.384Z,1516409516.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:56.762Z,1516409516.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:56.784Z,1516409516.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:57.156Z,1516409517.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:57.181Z,1516409517.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:57.547Z,1516409517.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:57.579Z,1516409517.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:57.966Z,1516409517.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:57.987Z,1516409517.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:58.377Z,1516409518.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:58.391Z,1516409518.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:58.774Z,1516409518.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:58.788Z,1516409518.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:59.150Z,1516409519.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:59.182Z,1516409519.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:59.551Z,1516409519.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:59.576Z,1516409519.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:51:59.972Z,1516409519.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:51:59.993Z,1516409519.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:00.378Z,1516409520.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:00.392Z,1516409520.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:00.770Z,1516409520.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:00.784Z,1516409520.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:01.152Z,1516409521.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:01.182Z,1516409521.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:01.555Z,1516409521.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:01.580Z,1516409521.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:01.970Z,1516409521.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:01.984Z,1516409521.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:02.372Z,1516409522.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:02.397Z,1516409522.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:02.766Z,1516409522.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:02.787Z,1516409522.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:03.156Z,1516409523.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:03.181Z,1516409523.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:03.551Z,1516409523.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:03.578Z,1516409523.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:03.970Z,1516409523.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:03.984Z,1516409523.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:04.374Z,1516409524.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:04.388Z,1516409524.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:04.775Z,1516409524.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:04.794Z,1516409524.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:05.145Z,1516409525.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:05.167Z,1516409525.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:05.556Z,1516409525.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:05.581Z,1516409525.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:05.954Z,1516409525.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:05.996Z,1516409525.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:06.373Z,1516409526.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:06.387Z,1516409526.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:06.771Z,1516409526.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:06.789Z,1516409526.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:07.170Z,1516409527.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:07.189Z,1516409527.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:07.555Z,1516409527.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:07.580Z,1516409527.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:07.951Z,1516409527.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:07.982Z,1516409527.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:08.352Z,1516409528.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:08.387Z,1516409528.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:08.745Z,1516409528.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:08.759Z,1516409528.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:09.162Z,1516409529.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:09.187Z,1516409529.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:09.566Z,1516409529.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:09.599Z,1516409529.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:09.958Z,1516409529.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:09.991Z,1516409529.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:10.351Z,1516409530.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:10.387Z,1516409530.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:10.755Z,1516409530.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:10.791Z,1516409530.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:11.152Z,1516409531.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:11.166Z,1516409531.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:11.560Z,1516409531.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:11.574Z,1516409531.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:11.969Z,1516409531.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:11.000Z,1516409532.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:12.370Z,1516409532.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:12.384Z,1516409532.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:12.774Z,1516409532.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:12.788Z,1516409532.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:13.166Z,1516409533.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:13.181Z,1516409533.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:13.563Z,1516409533.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:13.577Z,1516409533.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:13.963Z,1516409533.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:13.983Z,1516409533.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:14.364Z,1516409534.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:14.379Z,1516409534.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:14.754Z,1516409534.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:14.769Z,1516409534.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:15.164Z,1516409535.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:15.183Z,1516409535.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:15.570Z,1516409535.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:15.584Z,1516409535.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:15.966Z,1516409535.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:15.980Z,1516409535.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:16.364Z,1516409536.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:16.378Z,1516409536.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:16.761Z,1516409536.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:16.782Z,1516409536.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:17.164Z,1516409537.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:17.178Z,1516409537.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:17.561Z,1516409537.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:17.575Z,1516409537.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:17.954Z,1516409537.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:17.978Z,1516409537.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:18.374Z,1516409538.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:18.388Z,1516409538.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:18.773Z,1516409538.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:18.787Z,1516409538.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:19.174Z,1516409539.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:19.188Z,1516409539.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:19.565Z,1516409539.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:19.579Z,1516409539.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:19.961Z,1516409539.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:19.975Z,1516409539.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:20.358Z,1516409540.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:20.378Z,1516409540.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:23.455Z,1516409543.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:23.475Z,1516409543.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:23.591Z,1516409543.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:23.635Z,1516409543.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:23.938Z,1516409543.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:23.969Z,1516409543.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:24.345Z,1516409544.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:24.370Z,1516409544.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:24.725Z,1516409544.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:24.739Z,1516409544.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:25.132Z,1516409545.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:25.167Z,1516409545.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:25.526Z,1516409545.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:25.539Z,1516409545.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:25.924Z,1516409545.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:25.939Z,1516409545.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:26.343Z,1516409546.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:26.373Z,1516409546.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:26.746Z,1516409546.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:26.771Z,1516409546.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:27.130Z,1516409547.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:27.145Z,1516409547.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:27.531Z,1516409547.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:27.551Z,1516409547.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:27.924Z,1516409547.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:27.938Z,1516409547.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:28.324Z,1516409548.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:28.339Z,1516409548.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:28.736Z,1516409548.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:28.750Z,1516409548.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:29.128Z,1516409549.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:29.142Z,1516409549.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:29.546Z,1516409549.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:29.576Z,1516409549.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:29.945Z,1516409549.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:29.976Z,1516409549.976 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:29.976Z,1516409549.976 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-01-20T00:52:29.976Z,1516409549.976 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:52:29.978Z,1516409549.978 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:29.978Z,1516409549.978 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-01-20T00:52:29.978Z,1516409549.978 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:52:29.980Z,1516409549.980 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:29.980Z,1516409549.980 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 74
2018-01-20T00:52:29.980Z,1516409549.980 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:52:29.992Z,1516409549.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:52:29.992Z,1516409549.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:52:29.993Z,1516409549.993 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:52:30.342Z,1516409550.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:30.394Z,1516409550.394 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:52:30.394Z,1516409550.394 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-01-20T00:52:30.394Z,1516409550.394 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:52:30.394Z,1516409550.394 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-01-20T00:52:30.395Z,1516409550.395 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:52:30.395Z,1516409550.395 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 74
2018-01-20T00:52:30.720Z,1516409550.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:30.745Z,1516409550.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:52:30.746Z,1516409550.746 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:52:30.746Z,1516409550.746 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:52:30.746Z,1516409550.746 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:52:30.747Z,1516409550.747 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:52:30.747Z,1516409550.747 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:52:30.747Z,1516409550.747 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:52:30.748Z,1516409550.748 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:52:30.748Z,1516409550.748 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:52:31.131Z,1516409551.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:31.144Z,1516409551.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:52:31.146Z,1516409551.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:31.529Z,1516409551.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:31.542Z,1516409551.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:52:31.543Z,1516409551.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:31.928Z,1516409551.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:31.946Z,1516409551.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:52:31.947Z,1516409551.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:32.337Z,1516409552.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:32.358Z,1516409552.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:52:32.359Z,1516409552.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:32.742Z,1516409552.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:32.755Z,1516409552.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:52:32.756Z,1516409552.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:33.136Z,1516409553.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:33.150Z,1516409553.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:52:33.151Z,1516409553.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:33.534Z,1516409553.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:33.548Z,1516409553.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:52:33.549Z,1516409553.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:33.936Z,1516409553.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:33.949Z,1516409553.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:52:33.950Z,1516409553.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:34.329Z,1516409554.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:34.343Z,1516409554.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:52:34.344Z,1516409554.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:34.730Z,1516409554.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:34.748Z,1516409554.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:52:34.749Z,1516409554.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:35.136Z,1516409555.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:35.149Z,1516409555.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:52:35.150Z,1516409555.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:35.538Z,1516409555.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:35.552Z,1516409555.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:52:35.553Z,1516409555.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:35.942Z,1516409555.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:35.956Z,1516409555.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:52:35.957Z,1516409555.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:36.337Z,1516409556.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:36.358Z,1516409556.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:52:36.359Z,1516409556.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:36.725Z,1516409556.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:36.747Z,1516409556.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:52:36.748Z,1516409556.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:37.135Z,1516409557.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:37.149Z,1516409557.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:52:37.150Z,1516409557.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:37.520Z,1516409557.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:37.546Z,1516409557.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:52:37.547Z,1516409557.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:37.921Z,1516409557.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:37.943Z,1516409557.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:52:37.944Z,1516409557.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:38.346Z,1516409558.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:38.360Z,1516409558.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:52:38.361Z,1516409558.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:38.746Z,1516409558.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:38.766Z,1516409558.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:52:38.767Z,1516409558.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:39.134Z,1516409559.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:39.155Z,1516409559.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:52:39.156Z,1516409559.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:39.523Z,1516409559.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:39.548Z,1516409559.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:52:39.548Z,1516409559.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:39.940Z,1516409559.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:39.958Z,1516409559.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:52:39.959Z,1516409559.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:40.321Z,1516409560.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:40.347Z,1516409560.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:52:40.348Z,1516409560.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:40.728Z,1516409560.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:40.753Z,1516409560.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:52:40.754Z,1516409560.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:41.124Z,1516409561.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:41.154Z,1516409561.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:52:41.155Z,1516409561.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:41.546Z,1516409561.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:41.560Z,1516409561.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:52:41.561Z,1516409561.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:41.953Z,1516409561.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:41.975Z,1516409561.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:52:41.975Z,1516409561.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:42.347Z,1516409562.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:42.366Z,1516409562.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:52:42.367Z,1516409562.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:42.717Z,1516409562.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:42.731Z,1516409562.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T00:52:42.732Z,1516409562.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:43.131Z,1516409563.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:43.156Z,1516409563.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:52:43.157Z,1516409563.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:43.525Z,1516409563.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:43.550Z,1516409563.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:52:43.551Z,1516409563.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:43.921Z,1516409563.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:43.935Z,1516409563.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:52:43.936Z,1516409563.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:44.342Z,1516409564.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:44.367Z,1516409564.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:52:44.368Z,1516409564.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:44.755Z,1516409564.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:44.769Z,1516409564.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:52:44.770Z,1516409564.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:45.130Z,1516409565.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:45.144Z,1516409565.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:52:45.157Z,1516409565.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:45.532Z,1516409565.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:45.546Z,1516409565.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:52:45.547Z,1516409565.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:45.932Z,1516409565.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:45.951Z,1516409565.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:52:45.952Z,1516409565.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:46.342Z,1516409566.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:46.356Z,1516409566.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:52:46.373Z,1516409566.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:46.746Z,1516409566.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:46.759Z,1516409566.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:52:46.760Z,1516409566.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:47.138Z,1516409567.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:47.152Z,1516409567.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:52:47.153Z,1516409567.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:47.531Z,1516409567.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:47.550Z,1516409567.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:52:47.551Z,1516409567.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:47.935Z,1516409567.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:47.982Z,1516409567.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:52:47.983Z,1516409567.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:48.337Z,1516409568.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:48.351Z,1516409568.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:52:48.352Z,1516409568.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:48.729Z,1516409568.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:48.751Z,1516409568.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:52:48.752Z,1516409568.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:49.135Z,1516409569.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:49.149Z,1516409569.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:52:49.150Z,1516409569.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:49.546Z,1516409569.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:49.560Z,1516409569.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:52:49.561Z,1516409569.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:49.945Z,1516409569.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:49.959Z,1516409569.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T00:52:49.960Z,1516409569.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:50.345Z,1516409570.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:50.359Z,1516409570.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:50.730Z,1516409570.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:50.757Z,1516409570.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:51.138Z,1516409571.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:51.152Z,1516409571.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:51.533Z,1516409571.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:51.550Z,1516409571.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:51.940Z,1516409571.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:51.963Z,1516409571.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:52.346Z,1516409572.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:52.360Z,1516409572.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:52.745Z,1516409572.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:52.767Z,1516409572.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:53.146Z,1516409573.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:53.160Z,1516409573.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:53.523Z,1516409573.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:53.554Z,1516409573.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:53.923Z,1516409573.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:53.954Z,1516409573.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:54.334Z,1516409574.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:54.354Z,1516409574.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:54.723Z,1516409574.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:54.754Z,1516409574.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:55.139Z,1516409575.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:55.159Z,1516409575.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:55.543Z,1516409575.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:55.563Z,1516409575.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:55.949Z,1516409575.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:55.963Z,1516409575.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:56.350Z,1516409576.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:56.364Z,1516409576.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:56.733Z,1516409576.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:56.759Z,1516409576.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:57.124Z,1516409577.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:57.155Z,1516409577.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:57.531Z,1516409577.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:57.556Z,1516409577.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:57.923Z,1516409577.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:57.953Z,1516409577.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:58.346Z,1516409578.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:58.365Z,1516409578.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:58.755Z,1516409578.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:58.769Z,1516409578.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:59.133Z,1516409579.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:59.164Z,1516409579.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:59.531Z,1516409579.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:59.566Z,1516409579.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:52:59.930Z,1516409579.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:52:59.961Z,1516409579.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:00.332Z,1516409580.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:00.347Z,1516409580.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:00.731Z,1516409580.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:00.746Z,1516409580.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:01.137Z,1516409581.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:01.152Z,1516409581.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:01.543Z,1516409581.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:01.578Z,1516409581.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:01.947Z,1516409581.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:01.978Z,1516409581.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:02.340Z,1516409582.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:02.355Z,1516409582.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:02.736Z,1516409582.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:02.751Z,1516409582.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:03.137Z,1516409583.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:03.151Z,1516409583.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:03.535Z,1516409583.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:03.555Z,1516409583.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:03.936Z,1516409583.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:03.950Z,1516409583.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:04.343Z,1516409584.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:04.357Z,1516409584.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:04.742Z,1516409584.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:04.756Z,1516409584.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:05.139Z,1516409585.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:05.153Z,1516409585.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:05.539Z,1516409585.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:05.553Z,1516409585.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:05.935Z,1516409585.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:05.949Z,1516409585.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:06.329Z,1516409586.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:06.356Z,1516409586.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:06.726Z,1516409586.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:06.749Z,1516409586.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:07.126Z,1516409587.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:07.158Z,1516409587.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:07.550Z,1516409587.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:07.564Z,1516409587.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:07.943Z,1516409587.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:07.958Z,1516409587.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:08.345Z,1516409588.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:08.360Z,1516409588.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:08.719Z,1516409588.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:08.755Z,1516409588.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:09.138Z,1516409589.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:09.145Z,1516409589.145 [PNI_TCM](ERROR): CRC does not match. Expected:0x53059 got:0x19397
2018-01-20T00:53:09.171Z,1516409589.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:09.537Z,1516409589.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:09.559Z,1516409589.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:09.938Z,1516409589.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:09.952Z,1516409589.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:10.347Z,1516409590.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:10.362Z,1516409590.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:10.749Z,1516409590.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:10.764Z,1516409590.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:11.147Z,1516409591.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:11.161Z,1516409591.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:11.539Z,1516409591.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:11.553Z,1516409591.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:11.923Z,1516409591.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:11.963Z,1516409591.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:12.350Z,1516409592.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:12.357Z,1516409592.357 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2018-01-20T00:53:12.375Z,1516409592.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:12.744Z,1516409592.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:12.758Z,1516409592.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:13.148Z,1516409593.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:13.167Z,1516409593.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:13.536Z,1516409593.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:13.563Z,1516409593.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:13.938Z,1516409593.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:13.946Z,1516409593.946 [PNI_TCM](ERROR): CRC does not match. Expected:0x10370 got:0x39961
2018-01-20T00:53:13.971Z,1516409593.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:14.338Z,1516409594.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:14.352Z,1516409594.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:14.723Z,1516409594.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:14.757Z,1516409594.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:15.123Z,1516409595.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:15.163Z,1516409595.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:15.545Z,1516409595.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:15.559Z,1516409595.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:15.945Z,1516409595.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:15.959Z,1516409595.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:16.340Z,1516409596.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:16.359Z,1516409596.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:16.723Z,1516409596.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:16.767Z,1516409596.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:17.127Z,1516409597.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:17.157Z,1516409597.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:17.541Z,1516409597.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:17.555Z,1516409597.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:17.926Z,1516409597.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:17.952Z,1516409597.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:18.338Z,1516409598.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:18.363Z,1516409598.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:18.751Z,1516409598.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:18.771Z,1516409598.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:19.146Z,1516409599.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:19.160Z,1516409599.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:19.522Z,1516409599.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:19.551Z,1516409599.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:19.927Z,1516409599.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:19.977Z,1516409599.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:20.348Z,1516409600.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:20.363Z,1516409600.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:20.746Z,1516409600.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:20.763Z,1516409600.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:23.835Z,1516409603.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:23.855Z,1516409603.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:23.958Z,1516409603.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:23.972Z,1516409603.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:24.315Z,1516409604.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:24.358Z,1516409604.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:24.717Z,1516409604.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:24.753Z,1516409604.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:25.104Z,1516409605.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:25.119Z,1516409605.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:25.522Z,1516409605.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:25.552Z,1516409605.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:25.922Z,1516409605.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:25.952Z,1516409605.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:26.314Z,1516409606.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:26.328Z,1516409606.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:26.710Z,1516409606.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:26.725Z,1516409606.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:27.111Z,1516409607.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:27.127Z,1516409607.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:27.512Z,1516409607.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:27.526Z,1516409607.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:27.926Z,1516409607.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:27.940Z,1516409607.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:28.318Z,1516409608.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:28.332Z,1516409608.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:28.706Z,1516409608.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:28.725Z,1516409608.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:29.111Z,1516409609.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:29.125Z,1516409609.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:29.511Z,1516409609.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:29.530Z,1516409609.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:29.902Z,1516409609.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:29.929Z,1516409609.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:30.311Z,1516409610.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:30.325Z,1516409610.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:30.722Z,1516409610.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:30.738Z,1516409610.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:31.121Z,1516409611.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:31.135Z,1516409611.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:31.520Z,1516409611.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:31.539Z,1516409611.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:31.917Z,1516409611.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:31.939Z,1516409611.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:32.315Z,1516409612.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:32.335Z,1516409612.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:32.710Z,1516409612.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:32.730Z,1516409612.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:33.106Z,1516409613.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:33.137Z,1516409613.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:33.526Z,1516409613.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:33.540Z,1516409613.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:33.930Z,1516409613.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:33.947Z,1516409613.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:34.327Z,1516409614.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:34.347Z,1516409614.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:34.714Z,1516409614.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:34.739Z,1516409614.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:35.104Z,1516409615.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:35.130Z,1516409615.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:35.501Z,1516409615.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:35.537Z,1516409615.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:35.918Z,1516409615.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:35.933Z,1516409615.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:36.304Z,1516409616.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:36.339Z,1516409616.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:36.728Z,1516409616.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:36.743Z,1516409616.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:37.119Z,1516409617.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:37.141Z,1516409617.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:37.528Z,1516409617.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:37.542Z,1516409617.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:37.899Z,1516409617.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:37.937Z,1516409617.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:37.940Z,1516409617.940 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T00:48:37.7Z
2018-01-20T00:53:37.941Z,1516409617.941 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T00:53:37.941Z,1516409617.941 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T00:53:38.303Z,1516409618.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:38.339Z,1516409618.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:38.937Z,1516409618.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:38.950Z,1516409618.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:39.100Z,1516409619.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:39.132Z,1516409619.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:42.279Z,1516409622.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:42.294Z,1516409622.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:42.534Z,1516409622.534 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180119T210901/Courier0088.lzma
2018-01-20T00:53:42.575Z,1516409622.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:42.594Z,1516409622.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:42.763Z,1516409622.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:42.808Z,1516409622.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:43.119Z,1516409623.119 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0088.lzma.bak
2018-01-20T00:53:43.119Z,1516409623.119 [DataOverHttps](INFO): SBD MOMSN=7725459
2018-01-20T00:53:43.168Z,1516409623.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:43.185Z,1516409623.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:43.602Z,1516409623.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:43.616Z,1516409623.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:43.960Z,1516409623.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:44.007Z,1516409624.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:47.051Z,1516409627.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:47.066Z,1516409627.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:47.178Z,1516409627.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:47.222Z,1516409627.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:47.530Z,1516409627.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:47.561Z,1516409627.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:47.924Z,1516409627.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:47.963Z,1516409627.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:48.316Z,1516409628.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:48.331Z,1516409628.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:48.720Z,1516409628.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:48.734Z,1516409628.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:54.060Z,1516409634.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:54.087Z,1516409634.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:54.156Z,1516409634.156 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0092.lzma
2018-01-20T00:53:54.224Z,1516409634.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:54.263Z,1516409634.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:54.614Z,1516409634.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:54.632Z,1516409634.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:54.963Z,1516409634.963 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0092.lzma.bak
2018-01-20T00:53:54.963Z,1516409634.963 [DataOverHttps](INFO): SBD MOMSN=7725462
2018-01-20T00:53:55.023Z,1516409635.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:55.046Z,1516409635.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:55.584Z,1516409635.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:55.636Z,1516409635.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:53:55.791Z,1516409635.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:53:55.838Z,1516409635.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:02.265Z,1516409642.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:02.296Z,1516409642.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:02.452Z,1516409642.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:02.487Z,1516409642.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:02.824Z,1516409642.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:02.866Z,1516409642.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:03.196Z,1516409643.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:03.231Z,1516409643.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:03.596Z,1516409643.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:03.630Z,1516409643.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:03.992Z,1516409643.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:04.025Z,1516409644.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:07.098Z,1516409647.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:07.129Z,1516409647.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:07.194Z,1516409647.194 [DataOverHttps](INFO): Sending 464 bytes from file Logs/20180119T210901/Express0089.lzma
2018-01-20T00:54:07.236Z,1516409647.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:07.250Z,1516409647.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:07.595Z,1516409647.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:07.628Z,1516409647.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:07.955Z,1516409647.955 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0089.lzma.bak
2018-01-20T00:54:07.955Z,1516409647.955 [DataOverHttps](INFO): SBD MOMSN=7725464
2018-01-20T00:54:07.993Z,1516409647.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:08.030Z,1516409648.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:08.481Z,1516409648.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:08.495Z,1516409648.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:08.783Z,1516409648.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:08.822Z,1516409648.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:11.895Z,1516409651.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:11.931Z,1516409651.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:12.040Z,1516409652.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:12.059Z,1516409652.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:12.416Z,1516409652.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:12.443Z,1516409652.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:12.810Z,1516409652.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:12.838Z,1516409652.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:13.199Z,1516409653.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:13.242Z,1516409653.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:13.601Z,1516409653.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:13.633Z,1516409653.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:16.696Z,1516409656.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:16.711Z,1516409656.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:16.797Z,1516409656.797 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Express0093.lzma
2018-01-20T00:54:16.843Z,1516409656.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:16.857Z,1516409656.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:17.202Z,1516409657.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:17.242Z,1516409657.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:17.567Z,1516409657.567 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0093.lzma.bak
2018-01-20T00:54:17.567Z,1516409657.567 [DataOverHttps](INFO): SBD MOMSN=7725478
2018-01-20T00:54:17.622Z,1516409657.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:17.655Z,1516409657.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:18.098Z,1516409658.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:18.112Z,1516409658.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:18.115Z,1516409658.115 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T00:54:18.115Z,1516409658.115 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T00:54:18.115Z,1516409658.115 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T00:54:18.396Z,1516409658.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:18.438Z,1516409658.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:21.484Z,1516409661.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:21.498Z,1516409661.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:21.607Z,1516409661.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:21.654Z,1516409661.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:21.969Z,1516409661.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:22.008Z,1516409662.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:22.371Z,1516409662.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:22.399Z,1516409662.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:22.762Z,1516409662.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:22.797Z,1516409662.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:23.146Z,1516409663.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:23.167Z,1516409663.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:23.551Z,1516409663.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:23.565Z,1516409663.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:23.949Z,1516409663.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:23.963Z,1516409663.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:24.352Z,1516409664.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:24.366Z,1516409664.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:24.762Z,1516409664.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:24.776Z,1516409664.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:25.155Z,1516409665.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:25.169Z,1516409665.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:25.563Z,1516409665.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:25.583Z,1516409665.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:25.945Z,1516409665.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:25.960Z,1516409665.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:26.341Z,1516409666.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:26.356Z,1516409666.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:26.756Z,1516409666.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:26.787Z,1516409666.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:27.144Z,1516409667.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:27.182Z,1516409667.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:27.547Z,1516409667.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:27.582Z,1516409667.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:27.966Z,1516409667.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:27.983Z,1516409667.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:28.366Z,1516409668.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:28.381Z,1516409668.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:28.762Z,1516409668.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:28.789Z,1516409668.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:29.151Z,1516409669.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:29.176Z,1516409669.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:29.543Z,1516409669.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:29.575Z,1516409669.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:29.944Z,1516409669.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:29.978Z,1516409669.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:30.347Z,1516409670.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:30.378Z,1516409670.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:30.763Z,1516409670.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:30.783Z,1516409670.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:31.164Z,1516409671.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:31.183Z,1516409671.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:31.566Z,1516409671.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:31.580Z,1516409671.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:31.944Z,1516409671.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:31.979Z,1516409671.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:32.341Z,1516409672.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:32.363Z,1516409672.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:32.751Z,1516409672.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:32.776Z,1516409672.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:33.144Z,1516409673.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:33.179Z,1516409673.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:33.551Z,1516409673.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:33.576Z,1516409673.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:33.962Z,1516409673.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:33.983Z,1516409673.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:34.366Z,1516409674.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:34.389Z,1516409674.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:34.766Z,1516409674.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:34.780Z,1516409674.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:35.147Z,1516409675.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:35.179Z,1516409675.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:35.551Z,1516409675.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:35.584Z,1516409675.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:35.946Z,1516409675.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:35.960Z,1516409675.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:36.350Z,1516409676.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:36.386Z,1516409676.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:36.758Z,1516409676.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:36.794Z,1516409676.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:37.154Z,1516409677.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:37.184Z,1516409677.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:37.562Z,1516409677.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:37.587Z,1516409677.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:37.947Z,1516409677.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:37.966Z,1516409677.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:38.345Z,1516409678.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:38.359Z,1516409678.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:38.751Z,1516409678.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:38.787Z,1516409678.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:39.156Z,1516409679.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:39.170Z,1516409679.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:39.555Z,1516409679.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:39.575Z,1516409679.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:39.966Z,1516409679.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:39.980Z,1516409679.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:40.358Z,1516409680.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:40.372Z,1516409680.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:40.758Z,1516409680.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:40.772Z,1516409680.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:41.154Z,1516409681.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:41.168Z,1516409681.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:41.550Z,1516409681.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:41.564Z,1516409681.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:41.953Z,1516409681.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:41.967Z,1516409681.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:42.352Z,1516409682.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:42.366Z,1516409682.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:42.754Z,1516409682.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:42.768Z,1516409682.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:43.158Z,1516409683.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:43.172Z,1516409683.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:43.562Z,1516409683.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:43.576Z,1516409683.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:43.956Z,1516409683.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:43.970Z,1516409683.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:44.352Z,1516409684.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:44.366Z,1516409684.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:44.752Z,1516409684.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:44.771Z,1516409684.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:45.152Z,1516409685.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:45.165Z,1516409685.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:45.556Z,1516409685.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:45.571Z,1516409685.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:45.962Z,1516409685.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:45.976Z,1516409685.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:46.370Z,1516409686.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:46.401Z,1516409686.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:46.754Z,1516409686.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:46.768Z,1516409686.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:47.154Z,1516409687.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:47.168Z,1516409687.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:47.551Z,1516409687.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:47.564Z,1516409687.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:47.949Z,1516409687.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:47.983Z,1516409687.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:48.353Z,1516409688.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:48.371Z,1516409688.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:48.757Z,1516409688.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:48.771Z,1516409688.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:49.158Z,1516409689.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:49.172Z,1516409689.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:49.570Z,1516409689.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:49.584Z,1516409689.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:49.960Z,1516409689.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:49.974Z,1516409689.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:50.346Z,1516409690.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:50.368Z,1516409690.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:50.755Z,1516409690.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:50.769Z,1516409690.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:51.153Z,1516409691.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:51.167Z,1516409691.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:51.551Z,1516409691.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:51.565Z,1516409691.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:51.961Z,1516409691.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:51.983Z,1516409691.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:52.366Z,1516409692.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:52.383Z,1516409692.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:52.758Z,1516409692.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:52.780Z,1516409692.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:53.159Z,1516409693.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:53.179Z,1516409693.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:53.556Z,1516409693.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:53.574Z,1516409693.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:53.960Z,1516409693.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:53.975Z,1516409693.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:54.350Z,1516409694.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:54.372Z,1516409694.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:54.762Z,1516409694.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:54.783Z,1516409694.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:55.165Z,1516409695.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:55.179Z,1516409695.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:55.569Z,1516409695.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:55.591Z,1516409695.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:55.960Z,1516409695.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:55.974Z,1516409695.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:56.353Z,1516409696.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:56.375Z,1516409696.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:56.760Z,1516409696.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:56.779Z,1516409696.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:57.144Z,1516409697.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:57.176Z,1516409697.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:57.547Z,1516409697.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:57.574Z,1516409697.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:57.974Z,1516409697.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:57.995Z,1516409697.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:58.374Z,1516409698.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:58.388Z,1516409698.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:58.763Z,1516409698.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:58.777Z,1516409698.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:59.164Z,1516409699.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:59.178Z,1516409699.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:59.544Z,1516409699.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:59.576Z,1516409699.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:54:59.963Z,1516409699.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:54:59.979Z,1516409699.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:00.357Z,1516409700.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:00.383Z,1516409700.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:00.772Z,1516409700.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:00.786Z,1516409700.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:01.168Z,1516409701.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:01.183Z,1516409701.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:01.568Z,1516409701.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:01.583Z,1516409701.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:01.943Z,1516409701.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:01.981Z,1516409701.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:02.341Z,1516409702.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:02.367Z,1516409702.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:02.751Z,1516409702.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:02.783Z,1516409702.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:03.148Z,1516409703.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:03.182Z,1516409703.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:03.551Z,1516409703.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:03.578Z,1516409703.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:03.975Z,1516409703.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:03.995Z,1516409703.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:04.371Z,1516409704.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:04.386Z,1516409704.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:04.766Z,1516409704.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:04.782Z,1516409704.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:05.148Z,1516409705.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:05.179Z,1516409705.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:05.544Z,1516409705.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:05.580Z,1516409705.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:05.953Z,1516409705.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:05.979Z,1516409705.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:06.347Z,1516409706.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:06.382Z,1516409706.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:06.772Z,1516409706.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:06.786Z,1516409706.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:07.154Z,1516409707.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:07.187Z,1516409707.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:07.571Z,1516409707.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:07.585Z,1516409707.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:07.944Z,1516409707.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:07.981Z,1516409707.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:08.341Z,1516409708.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:08.355Z,1516409708.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:08.746Z,1516409708.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:08.786Z,1516409708.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:09.144Z,1516409709.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:09.188Z,1516409709.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:09.551Z,1516409709.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:09.583Z,1516409709.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:09.958Z,1516409709.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:09.991Z,1516409709.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:10.375Z,1516409710.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:10.389Z,1516409710.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:10.758Z,1516409710.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:10.787Z,1516409710.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:11.159Z,1516409711.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:11.179Z,1516409711.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:11.560Z,1516409711.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:11.574Z,1516409711.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:11.960Z,1516409711.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:11.975Z,1516409711.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:12.359Z,1516409712.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:12.379Z,1516409712.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:12.765Z,1516409712.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:12.779Z,1516409712.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:13.165Z,1516409713.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:13.179Z,1516409713.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:13.564Z,1516409713.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:13.583Z,1516409713.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:13.960Z,1516409713.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:13.974Z,1516409713.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:14.353Z,1516409714.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:14.367Z,1516409714.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:14.754Z,1516409714.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:14.775Z,1516409714.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:15.153Z,1516409715.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:15.170Z,1516409715.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:15.559Z,1516409715.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:15.579Z,1516409715.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:15.967Z,1516409715.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:15.982Z,1516409715.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:16.365Z,1516409716.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:16.379Z,1516409716.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:16.762Z,1516409716.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:16.784Z,1516409716.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:17.159Z,1516409717.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:17.179Z,1516409717.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:17.543Z,1516409717.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:17.569Z,1516409717.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:17.960Z,1516409717.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:17.975Z,1516409717.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:18.350Z,1516409718.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:18.372Z,1516409718.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:18.769Z,1516409718.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:18.791Z,1516409718.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:21.855Z,1516409721.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:21.870Z,1516409721.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:21.983Z,1516409721.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:22.022Z,1516409722.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:22.323Z,1516409722.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:22.343Z,1516409722.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:22.728Z,1516409722.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:22.742Z,1516409722.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:23.120Z,1516409723.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:23.139Z,1516409723.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:23.530Z,1516409723.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:23.544Z,1516409723.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:23.934Z,1516409723.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:23.948Z,1516409723.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:24.322Z,1516409724.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:24.336Z,1516409724.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:24.721Z,1516409724.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:24.743Z,1516409724.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:25.124Z,1516409725.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:25.138Z,1516409725.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:25.534Z,1516409725.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:25.548Z,1516409725.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:25.938Z,1516409725.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:25.952Z,1516409725.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:26.330Z,1516409726.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:26.344Z,1516409726.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:26.721Z,1516409726.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:26.735Z,1516409726.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:27.122Z,1516409727.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:27.140Z,1516409727.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:27.527Z,1516409727.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:27.541Z,1516409727.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:27.926Z,1516409727.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:27.948Z,1516409727.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:28.334Z,1516409728.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:28.348Z,1516409728.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:28.733Z,1516409728.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:28.747Z,1516409728.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:29.121Z,1516409729.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:29.134Z,1516409729.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:29.523Z,1516409729.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:29.537Z,1516409729.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:29.916Z,1516409729.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:29.952Z,1516409729.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:30.313Z,1516409730.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:30.334Z,1516409730.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:30.729Z,1516409730.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:30.743Z,1516409730.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:31.134Z,1516409731.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:31.147Z,1516409731.147 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:31.148Z,1516409731.148 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2018-01-20T00:55:31.148Z,1516409731.148 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:55:31.149Z,1516409731.149 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:31.150Z,1516409731.150 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2018-01-20T00:55:31.150Z,1516409731.150 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:55:31.151Z,1516409731.151 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:31.151Z,1516409731.151 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 75
2018-01-20T00:55:31.151Z,1516409731.151 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:55:31.185Z,1516409731.185 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:55:31.185Z,1516409731.185 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:55:31.185Z,1516409731.185 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:55:31.533Z,1516409731.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:31.558Z,1516409731.558 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:55:31.558Z,1516409731.558 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2018-01-20T00:55:31.558Z,1516409731.558 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:55:31.558Z,1516409731.558 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2018-01-20T00:55:31.559Z,1516409731.559 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:55:31.559Z,1516409731.559 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 75
2018-01-20T00:55:31.918Z,1516409731.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:31.948Z,1516409731.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:55:31.949Z,1516409731.949 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:55:31.949Z,1516409731.949 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:55:31.950Z,1516409731.950 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:55:31.950Z,1516409731.950 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:55:31.950Z,1516409731.950 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:55:31.951Z,1516409731.951 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:55:31.951Z,1516409731.951 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:55:31.951Z,1516409731.951 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:55:32.315Z,1516409732.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:32.349Z,1516409732.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:55:32.350Z,1516409732.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:32.714Z,1516409732.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:32.740Z,1516409732.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:55:32.742Z,1516409732.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:33.117Z,1516409733.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:33.142Z,1516409733.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:55:33.143Z,1516409733.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:33.512Z,1516409733.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:33.547Z,1516409733.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:55:33.548Z,1516409733.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:33.926Z,1516409733.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:33.949Z,1516409733.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:55:33.950Z,1516409733.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:34.334Z,1516409734.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:34.356Z,1516409734.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:55:34.358Z,1516409734.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:34.740Z,1516409734.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:34.753Z,1516409734.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:55:34.754Z,1516409734.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:35.116Z,1516409735.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:35.142Z,1516409735.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:55:35.143Z,1516409735.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:35.520Z,1516409735.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:35.550Z,1516409735.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:55:35.551Z,1516409735.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:35.922Z,1516409735.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:35.936Z,1516409735.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:55:35.946Z,1516409735.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:36.316Z,1516409736.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:36.335Z,1516409736.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:55:36.336Z,1516409736.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:36.735Z,1516409736.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:36.764Z,1516409736.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:55:36.765Z,1516409736.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:37.134Z,1516409737.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:37.166Z,1516409737.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:55:37.167Z,1516409737.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:37.535Z,1516409737.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:37.564Z,1516409737.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:55:37.565Z,1516409737.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:37.920Z,1516409737.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:37.935Z,1516409737.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:55:37.936Z,1516409737.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:38.325Z,1516409738.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:38.338Z,1516409738.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:55:38.339Z,1516409738.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:38.713Z,1516409738.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:38.735Z,1516409738.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:55:38.736Z,1516409738.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:39.126Z,1516409739.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:39.140Z,1516409739.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:55:39.141Z,1516409739.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:39.524Z,1516409739.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:39.538Z,1516409739.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:55:39.539Z,1516409739.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:39.925Z,1516409739.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:39.938Z,1516409739.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:55:39.939Z,1516409739.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:40.342Z,1516409740.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:40.364Z,1516409740.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:55:40.365Z,1516409740.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:40.726Z,1516409740.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:40.746Z,1516409740.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:55:40.747Z,1516409740.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:41.115Z,1516409741.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:41.135Z,1516409741.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:55:41.135Z,1516409741.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:41.525Z,1516409741.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:41.539Z,1516409741.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:55:41.539Z,1516409741.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:41.926Z,1516409741.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:41.939Z,1516409741.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:55:41.940Z,1516409741.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:42.316Z,1516409742.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:42.334Z,1516409742.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:55:42.335Z,1516409742.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:42.739Z,1516409742.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:42.767Z,1516409742.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:55:42.768Z,1516409742.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:43.126Z,1516409743.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:43.140Z,1516409743.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:55:43.141Z,1516409743.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:43.539Z,1516409743.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:43.567Z,1516409743.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:55:43.568Z,1516409743.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:43.921Z,1516409743.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:43.939Z,1516409743.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T00:55:43.940Z,1516409743.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:44.322Z,1516409744.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:44.346Z,1516409744.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:55:44.347Z,1516409744.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:44.721Z,1516409744.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:44.738Z,1516409744.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:55:44.739Z,1516409744.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:45.119Z,1516409745.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:45.140Z,1516409745.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:55:45.142Z,1516409745.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:45.511Z,1516409745.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:45.545Z,1516409745.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:55:45.546Z,1516409745.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:45.934Z,1516409745.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:45.948Z,1516409745.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:55:45.949Z,1516409745.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:46.336Z,1516409746.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:46.354Z,1516409746.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:55:46.355Z,1516409746.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:46.738Z,1516409746.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:46.754Z,1516409746.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:55:46.755Z,1516409746.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:47.121Z,1516409747.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:47.139Z,1516409747.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:55:47.140Z,1516409747.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:47.515Z,1516409747.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:47.550Z,1516409747.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:55:47.551Z,1516409747.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:47.924Z,1516409747.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:47.957Z,1516409747.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:55:47.958Z,1516409747.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:48.311Z,1516409748.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:48.337Z,1516409748.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:55:48.338Z,1516409748.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:48.738Z,1516409748.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:48.759Z,1516409748.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:55:48.760Z,1516409748.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:49.135Z,1516409749.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:49.156Z,1516409749.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:55:49.157Z,1516409749.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:49.522Z,1516409749.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:49.536Z,1516409749.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:55:49.537Z,1516409749.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:49.920Z,1516409749.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:49.938Z,1516409749.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:55:49.939Z,1516409749.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:50.324Z,1516409750.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:50.337Z,1516409750.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:55:50.338Z,1516409750.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:50.712Z,1516409750.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:50.738Z,1516409750.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:55:50.739Z,1516409750.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:51.125Z,1516409751.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:51.138Z,1516409751.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T00:55:51.139Z,1516409751.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:51.524Z,1516409751.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:51.538Z,1516409751.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:51.922Z,1516409751.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:51.936Z,1516409751.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:52.338Z,1516409752.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:52.368Z,1516409752.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:52.730Z,1516409752.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:52.744Z,1516409752.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:53.120Z,1516409753.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:53.139Z,1516409753.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:53.522Z,1516409753.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:53.536Z,1516409753.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:53.925Z,1516409753.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:53.939Z,1516409753.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:54.314Z,1516409754.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:54.334Z,1516409754.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:54.726Z,1516409754.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:54.740Z,1516409754.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:55.138Z,1516409755.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:55.171Z,1516409755.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:55.538Z,1516409755.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:55.552Z,1516409755.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:55.927Z,1516409755.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:55.947Z,1516409755.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:56.327Z,1516409756.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:56.346Z,1516409756.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:56.713Z,1516409756.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:56.734Z,1516409756.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:57.118Z,1516409757.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:57.147Z,1516409757.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:57.524Z,1516409757.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:57.538Z,1516409757.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:57.927Z,1516409757.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:57.947Z,1516409757.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:58.334Z,1516409758.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:58.348Z,1516409758.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:58.730Z,1516409758.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:58.745Z,1516409758.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:59.121Z,1516409759.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:59.135Z,1516409759.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:59.523Z,1516409759.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:59.537Z,1516409759.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:55:59.924Z,1516409759.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:55:59.946Z,1516409759.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:00.320Z,1516409760.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:00.338Z,1516409760.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:00.732Z,1516409760.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:00.751Z,1516409760.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:01.134Z,1516409761.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:01.148Z,1516409761.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:01.532Z,1516409761.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:01.551Z,1516409761.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:01.923Z,1516409761.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:01.937Z,1516409761.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:02.324Z,1516409762.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:02.338Z,1516409762.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:02.718Z,1516409762.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:02.745Z,1516409762.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:03.128Z,1516409763.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:03.142Z,1516409763.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:03.520Z,1516409763.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:03.543Z,1516409763.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:03.926Z,1516409763.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:03.953Z,1516409763.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:04.338Z,1516409764.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:04.352Z,1516409764.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:04.738Z,1516409764.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:04.752Z,1516409764.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:05.127Z,1516409765.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:05.147Z,1516409765.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:05.527Z,1516409765.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:05.541Z,1516409765.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:05.916Z,1516409765.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:05.952Z,1516409765.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:06.326Z,1516409766.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:06.344Z,1516409766.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:06.733Z,1516409766.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:06.755Z,1516409766.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:07.141Z,1516409767.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:07.155Z,1516409767.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:07.538Z,1516409767.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:07.552Z,1516409767.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:07.927Z,1516409767.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:07.947Z,1516409767.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:08.315Z,1516409768.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:08.351Z,1516409768.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:08.718Z,1516409768.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:08.745Z,1516409768.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:09.128Z,1516409769.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:09.143Z,1516409769.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:09.518Z,1516409769.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:09.549Z,1516409769.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:09.937Z,1516409769.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:09.952Z,1516409769.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:10.341Z,1516409770.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:10.355Z,1516409770.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:10.742Z,1516409770.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:10.756Z,1516409770.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:11.128Z,1516409771.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:11.142Z,1516409771.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:11.515Z,1516409771.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:11.547Z,1516409771.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:11.916Z,1516409771.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:11.948Z,1516409771.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:12.311Z,1516409772.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:12.337Z,1516409772.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:12.735Z,1516409772.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:12.749Z,1516409772.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:13.135Z,1516409773.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:13.155Z,1516409773.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:13.538Z,1516409773.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:13.559Z,1516409773.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:13.928Z,1516409773.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:13.964Z,1516409773.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:14.316Z,1516409774.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:14.342Z,1516409774.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:14.716Z,1516409774.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:14.747Z,1516409774.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:15.125Z,1516409775.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:15.151Z,1516409775.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:15.529Z,1516409775.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:15.543Z,1516409775.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:15.935Z,1516409775.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:15.950Z,1516409775.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:16.338Z,1516409776.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:16.352Z,1516409776.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:16.730Z,1516409776.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:16.744Z,1516409776.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:17.127Z,1516409777.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:17.145Z,1516409777.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:17.515Z,1516409777.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:17.547Z,1516409777.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:17.912Z,1516409777.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:17.939Z,1516409777.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:18.327Z,1516409778.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:18.343Z,1516409778.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:18.742Z,1516409778.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:18.756Z,1516409778.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:19.142Z,1516409779.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:19.156Z,1516409779.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:22.220Z,1516409782.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:22.242Z,1516409782.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:22.352Z,1516409782.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:22.394Z,1516409782.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:22.696Z,1516409782.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:22.715Z,1516409782.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:23.104Z,1516409783.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:23.118Z,1516409783.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:23.496Z,1516409783.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:23.510Z,1516409783.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:23.914Z,1516409783.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:23.935Z,1516409783.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:24.310Z,1516409784.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:24.336Z,1516409784.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:24.714Z,1516409784.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:24.743Z,1516409784.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:25.096Z,1516409785.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:25.115Z,1516409785.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:25.495Z,1516409785.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:25.510Z,1516409785.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:25.899Z,1516409785.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:25.913Z,1516409785.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:26.300Z,1516409786.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:26.319Z,1516409786.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:26.710Z,1516409786.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:26.724Z,1516409786.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:27.102Z,1516409787.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:27.116Z,1516409787.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:27.514Z,1516409787.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:27.528Z,1516409787.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:27.901Z,1516409787.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:27.915Z,1516409787.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:28.290Z,1516409788.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:28.310Z,1516409788.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:28.699Z,1516409788.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:28.713Z,1516409788.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:29.102Z,1516409789.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:29.115Z,1516409789.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:29.495Z,1516409789.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:29.509Z,1516409789.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:29.904Z,1516409789.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:29.923Z,1516409789.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:30.310Z,1516409790.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:30.323Z,1516409790.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:30.705Z,1516409790.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:30.723Z,1516409790.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:31.103Z,1516409791.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:31.117Z,1516409791.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:31.504Z,1516409791.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:31.518Z,1516409791.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:31.903Z,1516409791.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:31.923Z,1516409791.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:32.303Z,1516409792.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:32.323Z,1516409792.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:32.706Z,1516409792.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:32.727Z,1516409792.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:33.104Z,1516409793.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:33.123Z,1516409793.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:33.506Z,1516409793.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:33.520Z,1516409793.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:33.904Z,1516409793.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:33.918Z,1516409793.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:34.296Z,1516409794.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:34.314Z,1516409794.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:34.703Z,1516409794.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:34.723Z,1516409794.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:35.104Z,1516409795.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:35.123Z,1516409795.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:35.503Z,1516409795.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:35.523Z,1516409795.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:35.906Z,1516409795.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:35.920Z,1516409795.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:36.306Z,1516409796.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:36.320Z,1516409796.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:36.706Z,1516409796.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:36.720Z,1516409796.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:37.103Z,1516409797.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:37.123Z,1516409797.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:37.504Z,1516409797.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:37.519Z,1516409797.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:37.903Z,1516409797.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:37.923Z,1516409797.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:38.299Z,1516409798.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:38.319Z,1516409798.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:38.706Z,1516409798.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:38.721Z,1516409798.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:39.106Z,1516409799.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:39.120Z,1516409799.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:39.506Z,1516409799.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:39.520Z,1516409799.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:39.901Z,1516409799.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:39.915Z,1516409799.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:40.299Z,1516409800.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:40.319Z,1516409800.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:40.702Z,1516409800.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:40.716Z,1516409800.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:41.098Z,1516409801.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:41.125Z,1516409801.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:41.504Z,1516409801.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:41.518Z,1516409801.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:41.910Z,1516409801.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:41.925Z,1516409801.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:42.310Z,1516409802.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:42.324Z,1516409802.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:42.709Z,1516409802.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:42.723Z,1516409802.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:43.103Z,1516409803.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:43.118Z,1516409803.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:43.508Z,1516409803.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:43.522Z,1516409803.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:43.905Z,1516409803.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:43.919Z,1516409803.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:44.304Z,1516409804.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:44.318Z,1516409804.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:44.710Z,1516409804.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:44.724Z,1516409804.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:45.107Z,1516409805.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:45.133Z,1516409805.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:45.513Z,1516409805.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:45.527Z,1516409805.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:45.905Z,1516409805.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:45.919Z,1516409805.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:46.298Z,1516409806.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:46.317Z,1516409806.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:46.707Z,1516409806.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:46.727Z,1516409806.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:47.101Z,1516409807.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:47.130Z,1516409807.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:47.505Z,1516409807.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:47.519Z,1516409807.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:47.910Z,1516409807.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:47.931Z,1516409807.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:48.314Z,1516409808.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:48.328Z,1516409808.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:48.713Z,1516409808.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:48.735Z,1516409808.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:49.104Z,1516409809.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:49.118Z,1516409809.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:49.487Z,1516409809.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:49.520Z,1516409809.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:49.894Z,1516409809.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:49.921Z,1516409809.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:50.295Z,1516409810.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:50.326Z,1516409810.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:50.704Z,1516409810.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:50.732Z,1516409810.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:51.106Z,1516409811.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:51.143Z,1516409811.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:51.520Z,1516409811.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:51.535Z,1516409811.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:51.899Z,1516409811.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:51.926Z,1516409811.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:52.299Z,1516409812.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:52.315Z,1516409812.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:52.696Z,1516409812.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:52.710Z,1516409812.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:53.103Z,1516409813.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:53.117Z,1516409813.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:53.499Z,1516409813.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:53.514Z,1516409813.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:53.914Z,1516409813.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:53.944Z,1516409813.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:54.314Z,1516409814.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:54.345Z,1516409814.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:54.711Z,1516409814.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:54.741Z,1516409814.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:55.103Z,1516409815.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:55.118Z,1516409815.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:55.500Z,1516409815.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:55.514Z,1516409815.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:55.902Z,1516409815.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:55.916Z,1516409815.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:56.312Z,1516409816.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:56.327Z,1516409816.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:56.707Z,1516409816.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:56.723Z,1516409816.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:57.109Z,1516409817.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:57.123Z,1516409817.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:57.509Z,1516409817.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:57.523Z,1516409817.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:57.909Z,1516409817.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:57.923Z,1516409817.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:58.296Z,1516409818.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:58.323Z,1516409818.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:58.702Z,1516409818.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:58.722Z,1516409818.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:59.092Z,1516409819.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:59.123Z,1516409819.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:59.506Z,1516409819.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:59.527Z,1516409819.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:56:59.914Z,1516409819.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:56:59.928Z,1516409819.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:00.310Z,1516409820.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:00.330Z,1516409820.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:00.714Z,1516409820.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:00.735Z,1516409820.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:01.087Z,1516409821.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:01.121Z,1516409821.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:01.490Z,1516409821.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:01.519Z,1516409821.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:01.906Z,1516409821.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:01.920Z,1516409821.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:02.291Z,1516409822.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:02.323Z,1516409822.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:02.718Z,1516409822.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:02.732Z,1516409822.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:03.118Z,1516409823.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:03.132Z,1516409823.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:03.517Z,1516409823.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:03.531Z,1516409823.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:03.889Z,1516409823.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:03.918Z,1516409823.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:04.295Z,1516409824.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:04.324Z,1516409824.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:04.693Z,1516409824.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:04.726Z,1516409824.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:05.108Z,1516409825.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:05.121Z,1516409825.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:05.496Z,1516409825.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:05.521Z,1516409825.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:05.914Z,1516409825.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:05.928Z,1516409825.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:06.313Z,1516409826.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:06.327Z,1516409826.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:06.715Z,1516409826.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:06.735Z,1516409826.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:07.096Z,1516409827.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:07.121Z,1516409827.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:07.487Z,1516409827.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:07.522Z,1516409827.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:07.893Z,1516409827.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:07.938Z,1516409827.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:08.306Z,1516409828.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:08.320Z,1516409828.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:08.702Z,1516409828.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:08.733Z,1516409828.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:09.119Z,1516409829.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:09.133Z,1516409829.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:09.513Z,1516409829.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:09.527Z,1516409829.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:09.908Z,1516409829.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:09.922Z,1516409829.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:10.307Z,1516409830.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:10.321Z,1516409830.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:10.712Z,1516409830.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:10.728Z,1516409830.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:11.121Z,1516409831.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:11.135Z,1516409831.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:11.516Z,1516409831.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:11.535Z,1516409831.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:11.906Z,1516409831.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:11.920Z,1516409831.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:12.287Z,1516409832.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:12.322Z,1516409832.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:12.718Z,1516409832.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:12.732Z,1516409832.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:13.119Z,1516409833.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:13.134Z,1516409833.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:13.509Z,1516409833.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:13.530Z,1516409833.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:13.892Z,1516409833.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:13.935Z,1516409833.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:14.291Z,1516409834.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:14.327Z,1516409834.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:14.703Z,1516409834.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:14.734Z,1516409834.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:15.117Z,1516409835.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:15.131Z,1516409835.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:15.515Z,1516409835.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:15.532Z,1516409835.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:15.896Z,1516409835.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:15.926Z,1516409835.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:16.296Z,1516409836.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:16.324Z,1516409836.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:16.712Z,1516409836.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:16.727Z,1516409836.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:17.119Z,1516409837.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:17.135Z,1516409837.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:17.517Z,1516409837.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:17.531Z,1516409837.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:17.896Z,1516409837.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:17.925Z,1516409837.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:18.287Z,1516409838.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:18.327Z,1516409838.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:18.714Z,1516409838.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:18.758Z,1516409838.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:19.116Z,1516409839.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:19.123Z,1516409839.123 [PNI_TCM](ERROR): CRC does not match. Expected:0x25004 got:0x49414
2018-01-20T00:57:19.159Z,1516409839.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:19.519Z,1516409839.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:19.532Z,1516409839.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:22.652Z,1516409842.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:22.671Z,1516409842.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:22.775Z,1516409842.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:22.789Z,1516409842.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:23.152Z,1516409843.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:23.167Z,1516409843.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:23.544Z,1516409843.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:23.568Z,1516409843.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:23.950Z,1516409843.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:23.964Z,1516409843.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:24.334Z,1516409844.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:24.348Z,1516409844.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:24.735Z,1516409844.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:24.749Z,1516409844.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:25.139Z,1516409845.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:25.154Z,1516409845.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:25.515Z,1516409845.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:25.550Z,1516409845.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:25.940Z,1516409845.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:25.947Z,1516409845.947 [PNI_TCM](ERROR): CRC does not match. Expected:0x35304 got:0x1621
2018-01-20T00:57:25.975Z,1516409845.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:26.346Z,1516409846.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:26.360Z,1516409846.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:26.726Z,1516409846.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:26.763Z,1516409846.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:27.120Z,1516409847.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:27.152Z,1516409847.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:27.522Z,1516409847.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:27.528Z,1516409847.528 [PNI_TCM](ERROR): CRC does not match. Expected:0x42466 got:0x55581
2018-01-20T00:57:27.563Z,1516409847.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:27.926Z,1516409847.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:27.952Z,1516409847.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:28.317Z,1516409848.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:28.358Z,1516409848.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:28.745Z,1516409848.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:28.759Z,1516409848.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:29.140Z,1516409849.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:29.158Z,1516409849.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:29.547Z,1516409849.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:29.567Z,1516409849.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:29.925Z,1516409849.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:29.955Z,1516409849.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:30.320Z,1516409850.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:30.356Z,1516409850.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:30.741Z,1516409850.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:30.752Z,1516409850.752 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2018-01-20T00:57:30.791Z,1516409850.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:31.143Z,1516409851.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:31.162Z,1516409851.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:31.545Z,1516409851.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:31.560Z,1516409851.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:31.924Z,1516409851.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:31.955Z,1516409851.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:32.320Z,1516409852.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:32.356Z,1516409852.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:32.739Z,1516409852.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:32.765Z,1516409852.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:33.138Z,1516409853.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:33.164Z,1516409853.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:33.547Z,1516409853.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:33.561Z,1516409853.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:33.917Z,1516409853.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:33.953Z,1516409853.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:34.315Z,1516409854.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:34.324Z,1516409854.324 [PNI_TCM](ERROR): CRC does not match. Expected:0x55383 got:0x49305
2018-01-20T00:57:34.358Z,1516409854.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:34.742Z,1516409854.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:34.787Z,1516409854.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:35.150Z,1516409855.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:35.157Z,1516409855.157 [PNI_TCM](ERROR): CRC does not match. Expected:0x4672 got:0x1857
2018-01-20T00:57:35.193Z,1516409855.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:35.547Z,1516409855.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:35.561Z,1516409855.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:35.921Z,1516409855.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:35.949Z,1516409855.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:36.315Z,1516409856.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:36.356Z,1516409856.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:36.726Z,1516409856.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:36.767Z,1516409856.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:37.149Z,1516409857.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:37.164Z,1516409857.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:37.545Z,1516409857.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:37.559Z,1516409857.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:37.925Z,1516409857.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:37.957Z,1516409857.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:38.320Z,1516409858.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:38.351Z,1516409858.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:38.736Z,1516409858.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:38.764Z,1516409858.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:39.129Z,1516409859.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:39.156Z,1516409859.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:39.535Z,1516409859.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:39.579Z,1516409859.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:39.924Z,1516409859.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:39.963Z,1516409859.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:40.314Z,1516409860.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:40.328Z,1516409860.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:40.737Z,1516409860.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:40.765Z,1516409860.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:41.134Z,1516409861.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:41.165Z,1516409861.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:41.534Z,1516409861.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:41.570Z,1516409861.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:41.926Z,1516409861.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:41.944Z,1516409861.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:42.327Z,1516409862.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:42.344Z,1516409862.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:42.730Z,1516409862.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:42.774Z,1516409862.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:43.138Z,1516409863.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:43.172Z,1516409863.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:43.544Z,1516409863.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:43.578Z,1516409863.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:43.930Z,1516409863.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:43.947Z,1516409863.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:44.324Z,1516409864.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:44.372Z,1516409864.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:44.741Z,1516409864.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:44.779Z,1516409864.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:45.129Z,1516409865.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:45.147Z,1516409865.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:45.531Z,1516409865.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:45.548Z,1516409865.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:45.929Z,1516409865.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:45.975Z,1516409865.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:46.322Z,1516409866.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:46.336Z,1516409866.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:46.730Z,1516409866.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:46.747Z,1516409866.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:47.144Z,1516409867.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:47.177Z,1516409867.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:47.541Z,1516409867.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:47.579Z,1516409867.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:47.928Z,1516409867.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:47.949Z,1516409867.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:48.321Z,1516409868.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:48.349Z,1516409868.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:48.729Z,1516409868.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:48.748Z,1516409868.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:49.142Z,1516409869.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:49.156Z,1516409869.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:49.532Z,1516409869.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:49.546Z,1516409869.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:49.932Z,1516409869.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:49.947Z,1516409869.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:50.327Z,1516409870.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:50.344Z,1516409870.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:50.734Z,1516409870.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:50.748Z,1516409870.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:51.133Z,1516409871.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:51.147Z,1516409871.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:51.534Z,1516409871.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:51.548Z,1516409871.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:51.931Z,1516409871.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:51.950Z,1516409871.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:52.326Z,1516409872.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:52.340Z,1516409872.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:52.732Z,1516409872.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:52.747Z,1516409872.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:53.132Z,1516409873.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:53.150Z,1516409873.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:53.534Z,1516409873.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:53.552Z,1516409873.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:53.927Z,1516409873.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:53.959Z,1516409873.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:54.329Z,1516409874.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:54.343Z,1516409874.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:54.725Z,1516409874.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:54.740Z,1516409874.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:55.136Z,1516409875.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:55.155Z,1516409875.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:55.538Z,1516409875.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:55.551Z,1516409875.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:55.937Z,1516409875.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:55.952Z,1516409875.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:56.326Z,1516409876.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:56.344Z,1516409876.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:56.727Z,1516409876.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:56.747Z,1516409876.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:57.126Z,1516409877.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:57.140Z,1516409877.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:57.523Z,1516409877.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:57.544Z,1516409877.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:57.934Z,1516409877.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:57.948Z,1516409877.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:58.337Z,1516409878.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:58.353Z,1516409878.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:58.737Z,1516409878.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:58.751Z,1516409878.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:59.127Z,1516409879.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:59.141Z,1516409879.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:59.524Z,1516409879.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:59.538Z,1516409879.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:57:59.926Z,1516409879.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:57:59.957Z,1516409879.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:00.332Z,1516409880.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:00.345Z,1516409880.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:00.725Z,1516409880.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:00.740Z,1516409880.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:01.136Z,1516409881.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:01.155Z,1516409881.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:01.536Z,1516409881.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:01.550Z,1516409881.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:01.937Z,1516409881.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:01.952Z,1516409881.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:02.326Z,1516409882.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:02.344Z,1516409882.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:02.723Z,1516409882.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:02.739Z,1516409882.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:03.125Z,1516409883.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:03.139Z,1516409883.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:03.526Z,1516409883.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:03.544Z,1516409883.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:03.936Z,1516409883.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:03.955Z,1516409883.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:04.334Z,1516409884.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:04.348Z,1516409884.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:04.736Z,1516409884.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:04.755Z,1516409884.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:05.131Z,1516409885.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:05.145Z,1516409885.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:05.526Z,1516409885.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:05.540Z,1516409885.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:05.924Z,1516409885.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:05.956Z,1516409885.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:06.332Z,1516409886.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:06.346Z,1516409886.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:06.726Z,1516409886.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:06.740Z,1516409886.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:07.137Z,1516409887.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:07.151Z,1516409887.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:07.536Z,1516409887.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:07.554Z,1516409887.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:07.938Z,1516409887.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:07.952Z,1516409887.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:08.328Z,1516409888.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:08.343Z,1516409888.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:08.728Z,1516409888.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:08.742Z,1516409888.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:09.126Z,1516409889.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:09.140Z,1516409889.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:09.519Z,1516409889.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:09.541Z,1516409889.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:09.934Z,1516409889.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:09.949Z,1516409889.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:10.338Z,1516409890.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:10.352Z,1516409890.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:10.738Z,1516409890.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:10.752Z,1516409890.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:11.132Z,1516409891.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:11.147Z,1516409891.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:11.533Z,1516409891.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:11.548Z,1516409891.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:11.923Z,1516409891.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:11.938Z,1516409891.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:12.324Z,1516409892.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:12.342Z,1516409892.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:12.726Z,1516409892.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:12.740Z,1516409892.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:13.137Z,1516409893.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:13.159Z,1516409893.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:13.541Z,1516409893.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:13.558Z,1516409893.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:13.935Z,1516409893.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:13.950Z,1516409893.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:14.323Z,1516409894.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:14.345Z,1516409894.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:14.715Z,1516409894.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:14.747Z,1516409894.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:15.130Z,1516409895.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:15.144Z,1516409895.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:15.523Z,1516409895.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:15.546Z,1516409895.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:15.937Z,1516409895.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:15.952Z,1516409895.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:16.339Z,1516409896.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:16.354Z,1516409896.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:16.742Z,1516409896.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:16.763Z,1516409896.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:17.116Z,1516409897.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:17.141Z,1516409897.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:17.516Z,1516409897.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:17.543Z,1516409897.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:17.920Z,1516409897.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:17.961Z,1516409897.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:18.333Z,1516409898.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:18.347Z,1516409898.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:18.717Z,1516409898.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:18.751Z,1516409898.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:19.143Z,1516409899.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:19.163Z,1516409899.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:19.546Z,1516409899.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:19.560Z,1516409899.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:22.635Z,1516409902.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:22.649Z,1516409902.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:22.760Z,1516409902.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:22.795Z,1516409902.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:23.101Z,1516409903.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:23.115Z,1516409903.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:23.501Z,1516409903.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:23.514Z,1516409903.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:23.896Z,1516409903.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:23.911Z,1516409903.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:24.308Z,1516409904.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:24.322Z,1516409904.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:24.704Z,1516409904.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:24.718Z,1516409904.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:25.102Z,1516409905.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:25.123Z,1516409905.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:25.518Z,1516409905.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:25.548Z,1516409905.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:25.902Z,1516409905.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:25.922Z,1516409905.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:26.296Z,1516409906.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:26.310Z,1516409906.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:26.700Z,1516409906.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:26.719Z,1516409906.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:27.099Z,1516409907.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:27.119Z,1516409907.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:27.499Z,1516409907.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:27.513Z,1516409907.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:27.904Z,1516409907.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:27.919Z,1516409907.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:28.318Z,1516409908.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:28.349Z,1516409908.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:28.702Z,1516409908.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:28.717Z,1516409908.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:29.110Z,1516409909.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:29.124Z,1516409909.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:29.504Z,1516409909.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:29.518Z,1516409909.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:29.896Z,1516409909.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:29.910Z,1516409909.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:30.298Z,1516409910.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:30.321Z,1516409910.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:30.708Z,1516409910.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:30.721Z,1516409910.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:31.107Z,1516409911.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:31.127Z,1516409911.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:31.514Z,1516409911.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:31.528Z,1516409911.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:31.910Z,1516409911.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:31.924Z,1516409911.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:32.301Z,1516409912.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:32.315Z,1516409912.315 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:32.315Z,1516409912.315 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2018-01-20T00:58:32.315Z,1516409912.315 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T00:58:32.317Z,1516409912.317 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:32.318Z,1516409912.318 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2018-01-20T00:58:32.318Z,1516409912.318 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T00:58:32.319Z,1516409912.319 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:32.319Z,1516409912.319 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 76
2018-01-20T00:58:32.319Z,1516409912.319 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T00:58:32.331Z,1516409912.331 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T00:58:32.331Z,1516409912.331 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T00:58:32.332Z,1516409912.332 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T00:58:32.697Z,1516409912.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:32.739Z,1516409912.739 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T00:58:32.739Z,1516409912.739 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2018-01-20T00:58:32.739Z,1516409912.739 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T00:58:32.739Z,1516409912.739 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2018-01-20T00:58:32.740Z,1516409912.740 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T00:58:32.740Z,1516409912.740 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 76
2018-01-20T00:58:33.099Z,1516409913.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:33.112Z,1516409913.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T00:58:33.112Z,1516409913.112 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:58:33.112Z,1516409913.112 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:58:33.113Z,1516409913.113 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T00:58:33.113Z,1516409913.113 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:58:33.114Z,1516409913.114 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:58:33.114Z,1516409913.114 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T00:58:33.114Z,1516409913.114 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T00:58:33.115Z,1516409913.115 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T00:58:33.492Z,1516409913.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:33.525Z,1516409913.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T00:58:33.526Z,1516409913.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:33.898Z,1516409913.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:33.920Z,1516409913.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T00:58:33.921Z,1516409913.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:34.311Z,1516409914.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:34.330Z,1516409914.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T00:58:34.331Z,1516409914.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:34.713Z,1516409914.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:34.727Z,1516409914.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T00:58:34.728Z,1516409914.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:35.117Z,1516409915.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:35.130Z,1516409915.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T00:58:35.131Z,1516409915.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:35.508Z,1516409915.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:35.521Z,1516409915.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T00:58:35.522Z,1516409915.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:35.901Z,1516409915.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:35.923Z,1516409915.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T00:58:35.924Z,1516409915.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:36.308Z,1516409916.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:36.322Z,1516409916.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T00:58:36.323Z,1516409916.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:36.691Z,1516409916.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:36.723Z,1516409916.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T00:58:36.724Z,1516409916.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:37.111Z,1516409917.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:37.125Z,1516409917.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T00:58:37.126Z,1516409917.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:37.518Z,1516409917.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:37.531Z,1516409917.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T00:58:37.532Z,1516409917.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:37.919Z,1516409917.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:37.932Z,1516409917.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T00:58:37.933Z,1516409917.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:38.289Z,1516409918.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:38.322Z,1516409918.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T00:58:38.323Z,1516409918.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:38.695Z,1516409918.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:38.726Z,1516409918.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T00:58:38.727Z,1516409918.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:39.108Z,1516409919.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:39.122Z,1516409919.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T00:58:39.123Z,1516409919.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:39.508Z,1516409919.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:39.522Z,1516409919.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T00:58:39.523Z,1516409919.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:39.895Z,1516409919.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:39.931Z,1516409919.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T00:58:39.931Z,1516409919.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:40.318Z,1516409920.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:40.332Z,1516409920.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T00:58:40.333Z,1516409920.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:40.722Z,1516409920.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:40.735Z,1516409920.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T00:58:40.736Z,1516409920.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:41.114Z,1516409921.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:41.128Z,1516409921.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T00:58:41.129Z,1516409921.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:41.491Z,1516409921.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:41.527Z,1516409921.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T00:58:41.528Z,1516409921.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:41.889Z,1516409921.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:41.922Z,1516409921.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T00:58:41.923Z,1516409921.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:42.300Z,1516409922.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:42.326Z,1516409922.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T00:58:42.327Z,1516409922.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:42.695Z,1516409922.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:42.728Z,1516409922.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T00:58:42.729Z,1516409922.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:43.110Z,1516409923.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:43.144Z,1516409923.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T00:58:43.145Z,1516409923.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:43.516Z,1516409923.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:43.535Z,1516409923.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T00:58:43.536Z,1516409923.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:43.923Z,1516409923.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:43.936Z,1516409923.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T00:58:43.937Z,1516409923.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:44.294Z,1516409924.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:44.316Z,1516409924.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T00:58:44.317Z,1516409924.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:44.700Z,1516409924.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:44.730Z,1516409924.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T00:58:44.731Z,1516409924.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:45.091Z,1516409925.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:45.135Z,1516409925.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T00:58:45.136Z,1516409925.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:45.501Z,1516409925.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:45.530Z,1516409925.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T00:58:45.531Z,1516409925.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:45.895Z,1516409925.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:45.930Z,1516409925.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T00:58:45.931Z,1516409925.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:46.320Z,1516409926.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:46.334Z,1516409926.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T00:58:46.335Z,1516409926.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:46.723Z,1516409926.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:46.737Z,1516409926.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T00:58:46.738Z,1516409926.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:47.106Z,1516409927.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:47.138Z,1516409927.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T00:58:47.139Z,1516409927.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:47.495Z,1516409927.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:47.529Z,1516409927.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T00:58:47.530Z,1516409927.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:47.893Z,1516409927.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:47.907Z,1516409927.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T00:58:47.908Z,1516409927.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:48.312Z,1516409928.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:48.336Z,1516409928.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T00:58:48.336Z,1516409928.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:48.695Z,1516409928.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:48.709Z,1516409928.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T00:58:48.710Z,1516409928.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:49.111Z,1516409929.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:49.142Z,1516409929.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T00:58:49.143Z,1516409929.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:49.514Z,1516409929.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:49.536Z,1516409929.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T00:58:49.536Z,1516409929.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:49.914Z,1516409929.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:49.937Z,1516409929.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T00:58:49.938Z,1516409929.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:50.296Z,1516409930.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:50.311Z,1516409930.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T00:58:50.312Z,1516409930.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:50.700Z,1516409930.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:50.715Z,1516409930.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T00:58:50.716Z,1516409930.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:51.103Z,1516409931.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:51.117Z,1516409931.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T00:58:51.118Z,1516409931.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:51.506Z,1516409931.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:51.520Z,1516409931.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T00:58:51.521Z,1516409931.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:51.901Z,1516409931.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:51.915Z,1516409931.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T00:58:51.916Z,1516409931.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:52.302Z,1516409932.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:52.316Z,1516409932.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:52.714Z,1516409932.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:52.728Z,1516409932.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:53.118Z,1516409933.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:53.132Z,1516409933.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:53.505Z,1516409933.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:53.519Z,1516409933.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:53.907Z,1516409933.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:53.927Z,1516409933.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:54.303Z,1516409934.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:54.322Z,1516409934.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:54.709Z,1516409934.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:54.723Z,1516409934.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:55.114Z,1516409935.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:55.128Z,1516409935.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:55.513Z,1516409935.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:55.527Z,1516409935.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:55.911Z,1516409935.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:55.925Z,1516409935.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:56.293Z,1516409936.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:56.319Z,1516409936.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:56.706Z,1516409936.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:56.731Z,1516409936.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:57.091Z,1516409937.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:57.118Z,1516409937.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:57.508Z,1516409937.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:57.523Z,1516409937.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:57.895Z,1516409937.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:57.927Z,1516409937.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:58.309Z,1516409938.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:58.339Z,1516409938.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:58.714Z,1516409938.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:58.732Z,1516409938.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:59.114Z,1516409939.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:59.128Z,1516409939.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:59.491Z,1516409939.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:59.528Z,1516409939.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:58:59.889Z,1516409939.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:58:59.926Z,1516409939.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:00.296Z,1516409940.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:00.326Z,1516409940.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:00.699Z,1516409940.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:00.732Z,1516409940.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:01.106Z,1516409941.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:01.140Z,1516409941.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:01.518Z,1516409941.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:01.536Z,1516409941.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:01.928Z,1516409941.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:01.943Z,1516409941.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:02.290Z,1516409942.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:02.313Z,1516409942.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:02.704Z,1516409942.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:02.718Z,1516409942.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:03.104Z,1516409943.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:03.118Z,1516409943.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:03.501Z,1516409943.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:03.515Z,1516409943.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:03.901Z,1516409943.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:03.923Z,1516409943.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:04.314Z,1516409944.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:04.328Z,1516409944.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:04.718Z,1516409944.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:04.732Z,1516409944.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:05.110Z,1516409945.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:05.124Z,1516409945.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:05.507Z,1516409945.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:05.521Z,1516409945.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:05.901Z,1516409945.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:05.923Z,1516409945.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:06.307Z,1516409946.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:06.327Z,1516409946.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:06.704Z,1516409946.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:06.718Z,1516409946.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:07.108Z,1516409947.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:07.127Z,1516409947.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:07.510Z,1516409947.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:07.524Z,1516409947.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:07.910Z,1516409947.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:07.924Z,1516409947.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:08.301Z,1516409948.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:08.315Z,1516409948.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:08.702Z,1516409948.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:08.716Z,1516409948.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:09.104Z,1516409949.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:09.118Z,1516409949.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:09.496Z,1516409949.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:09.517Z,1516409949.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:09.903Z,1516409949.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:09.917Z,1516409949.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:10.309Z,1516409950.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:10.324Z,1516409950.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:10.714Z,1516409950.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:10.728Z,1516409950.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:11.110Z,1516409951.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:11.124Z,1516409951.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:11.508Z,1516409951.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:11.522Z,1516409951.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:11.900Z,1516409951.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:11.918Z,1516409951.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:12.302Z,1516409952.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:12.320Z,1516409952.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:12.708Z,1516409952.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:12.722Z,1516409952.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:13.108Z,1516409953.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:13.127Z,1516409953.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:13.510Z,1516409953.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:13.524Z,1516409953.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:13.909Z,1516409953.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:13.923Z,1516409953.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:14.299Z,1516409954.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:14.313Z,1516409954.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:14.715Z,1516409954.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:14.729Z,1516409954.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:15.098Z,1516409955.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:15.129Z,1516409955.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:15.500Z,1516409955.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:15.525Z,1516409955.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:15.538Z,1516409955.538 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T00:59:15.895Z,1516409955.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:15.920Z,1516409955.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:16.315Z,1516409956.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:16.329Z,1516409956.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:16.714Z,1516409956.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:16.728Z,1516409956.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:17.114Z,1516409957.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:17.128Z,1516409957.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:17.495Z,1516409957.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:17.523Z,1516409957.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:17.891Z,1516409957.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:17.923Z,1516409957.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:18.300Z,1516409958.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:18.325Z,1516409958.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:18.695Z,1516409958.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:18.731Z,1516409958.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:18.738Z,1516409958.738 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T00:59:18.738Z,1516409958.738 [Default:CheckIn:C.Wait] Stopped
2018-01-20T00:59:18.738Z,1516409958.738 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T00:59:18.739Z,1516409958.739 [Default:CheckIn:D] Running Loop=1
2018-01-20T00:59:19.110Z,1516409959.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:19.135Z,1516409959.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:19.139Z,1516409959.139 [Default:CheckIn:D] Stopped
2018-01-20T00:59:19.139Z,1516409959.139 [Default:CheckIn:E] Running Loop=1
2018-01-20T00:59:19.510Z,1516409959.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:19.543Z,1516409959.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:19.547Z,1516409959.547 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.917900 min 
2018-01-20T00:59:19.547Z,1516409959.547 [Default:CheckIn:E] Stopped
2018-01-20T00:59:19.547Z,1516409959.547 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T00:59:19.547Z,1516409959.547 [Default:CheckIn] Stopped
2018-01-20T00:59:19.547Z,1516409959.547 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T00:59:19.547Z,1516409959.547 [Default:CheckIn](INFO): Running loop #2
2018-01-20T00:59:19.548Z,1516409959.548 [Default:CheckIn] Running Loop=2
2018-01-20T00:59:19.548Z,1516409959.548 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T00:59:19.548Z,1516409959.548 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T00:59:19.929Z,1516409959.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:19.943Z,1516409959.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:22.990Z,1516409962.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:23.005Z,1516409963.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:23.107Z,1516409963.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:23.150Z,1516409963.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:23.466Z,1516409963.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:23.491Z,1516409963.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:23.886Z,1516409963.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:23.900Z,1516409963.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:24.266Z,1516409964.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:24.299Z,1516409964.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:24.658Z,1516409964.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:24.672Z,1516409964.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:25.055Z,1516409965.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:25.074Z,1516409965.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:25.453Z,1516409965.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:25.468Z,1516409965.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:25.857Z,1516409965.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:25.871Z,1516409965.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:26.270Z,1516409966.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:26.295Z,1516409966.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:26.674Z,1516409966.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:26.703Z,1516409966.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:27.070Z,1516409967.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:27.094Z,1516409967.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:27.457Z,1516409967.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:27.471Z,1516409967.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:27.851Z,1516409967.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:27.871Z,1516409967.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:28.260Z,1516409968.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:28.274Z,1516409968.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:28.657Z,1516409968.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:28.671Z,1516409968.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:29.058Z,1516409969.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:29.072Z,1516409969.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:29.470Z,1516409969.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:29.496Z,1516409969.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:29.874Z,1516409969.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:29.904Z,1516409969.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:30.256Z,1516409970.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:30.271Z,1516409970.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:30.656Z,1516409970.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:30.684Z,1516409970.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:31.056Z,1516409971.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:31.071Z,1516409971.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:31.456Z,1516409971.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:31.471Z,1516409971.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:31.859Z,1516409971.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:31.874Z,1516409971.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:32.274Z,1516409972.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:32.309Z,1516409972.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:32.674Z,1516409972.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:32.709Z,1516409972.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:33.066Z,1516409973.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:33.080Z,1516409973.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:33.463Z,1516409973.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:33.477Z,1516409973.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:33.857Z,1516409973.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:33.871Z,1516409973.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:34.256Z,1516409974.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:34.286Z,1516409974.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:34.664Z,1516409974.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:34.678Z,1516409974.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:35.065Z,1516409975.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:35.079Z,1516409975.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:35.466Z,1516409975.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:35.480Z,1516409975.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:35.866Z,1516409975.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:35.880Z,1516409975.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:36.257Z,1516409976.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:36.271Z,1516409976.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:36.658Z,1516409976.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:36.673Z,1516409976.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:37.056Z,1516409977.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:37.070Z,1516409977.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:37.458Z,1516409977.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:37.473Z,1516409977.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:37.858Z,1516409977.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:37.873Z,1516409977.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:38.265Z,1516409978.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:38.287Z,1516409978.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:38.664Z,1516409978.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:38.683Z,1516409978.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:39.064Z,1516409979.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:39.083Z,1516409979.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:39.464Z,1516409979.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:39.477Z,1516409979.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:39.857Z,1516409979.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:39.871Z,1516409979.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:40.258Z,1516409980.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:40.276Z,1516409980.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:40.664Z,1516409980.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:40.677Z,1516409980.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:41.065Z,1516409981.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:41.079Z,1516409981.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:41.470Z,1516409981.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:41.484Z,1516409981.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:41.870Z,1516409981.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:41.890Z,1516409981.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:42.257Z,1516409982.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:42.275Z,1516409982.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:42.663Z,1516409982.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:42.683Z,1516409982.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:43.061Z,1516409983.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:43.075Z,1516409983.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:43.457Z,1516409983.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:43.472Z,1516409983.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:43.859Z,1516409983.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:43.873Z,1516409983.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:44.266Z,1516409984.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:44.287Z,1516409984.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:44.664Z,1516409984.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:44.679Z,1516409984.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:45.066Z,1516409985.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:45.080Z,1516409985.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:45.459Z,1516409985.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:45.478Z,1516409985.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:45.856Z,1516409985.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:45.874Z,1516409985.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:46.256Z,1516409986.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:46.276Z,1516409986.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:46.664Z,1516409986.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:46.678Z,1516409986.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:47.065Z,1516409987.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:47.079Z,1516409987.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:47.466Z,1516409987.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:47.480Z,1516409987.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:47.866Z,1516409987.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:47.880Z,1516409987.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:48.250Z,1516409988.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:48.272Z,1516409988.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:48.658Z,1516409988.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:48.672Z,1516409988.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:49.060Z,1516409989.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:49.074Z,1516409989.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:49.456Z,1516409989.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:49.475Z,1516409989.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:49.858Z,1516409989.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:49.872Z,1516409989.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:50.265Z,1516409990.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:50.287Z,1516409990.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:50.664Z,1516409990.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:50.683Z,1516409990.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:51.066Z,1516409991.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:51.080Z,1516409991.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:51.460Z,1516409991.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:51.474Z,1516409991.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:51.862Z,1516409991.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:51.877Z,1516409991.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:52.266Z,1516409992.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:52.281Z,1516409992.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:52.660Z,1516409992.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:52.675Z,1516409992.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:53.063Z,1516409993.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:53.086Z,1516409993.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:53.469Z,1516409993.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:53.490Z,1516409993.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:53.870Z,1516409993.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:53.891Z,1516409993.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:54.263Z,1516409994.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:54.279Z,1516409994.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:54.659Z,1516409994.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:54.673Z,1516409994.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:55.060Z,1516409995.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:55.074Z,1516409995.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:55.452Z,1516409995.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:55.474Z,1516409995.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:55.854Z,1516409995.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:55.881Z,1516409995.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:56.278Z,1516409996.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:56.308Z,1516409996.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:56.670Z,1516409996.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:56.684Z,1516409996.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:57.066Z,1516409997.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:57.080Z,1516409997.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:57.460Z,1516409997.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:57.474Z,1516409997.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:57.850Z,1516409997.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:57.872Z,1516409997.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:58.256Z,1516409998.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:58.282Z,1516409998.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:58.665Z,1516409998.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:58.687Z,1516409998.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:59.069Z,1516409999.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:59.091Z,1516409999.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:59.470Z,1516409999.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:59.484Z,1516409999.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T00:59:59.871Z,1516409999.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T00:59:59.885Z,1516409999.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:00.250Z,1516410000.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:00.279Z,1516410000.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:00.654Z,1516410000.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:00.685Z,1516410000.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:01.046Z,1516410001.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:01.073Z,1516410001.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:01.452Z,1516410001.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:01.487Z,1516410001.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:01.856Z,1516410001.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:01.886Z,1516410001.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:02.280Z,1516410002.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:02.294Z,1516410002.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:02.662Z,1516410002.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:02.688Z,1516410002.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:03.063Z,1516410003.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:03.089Z,1516410003.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:03.447Z,1516410003.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:03.492Z,1516410003.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:03.851Z,1516410003.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:03.886Z,1516410003.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:04.252Z,1516410004.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:04.275Z,1516410004.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:04.647Z,1516410004.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:04.662Z,1516410004.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:05.067Z,1516410005.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:05.092Z,1516410005.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:05.483Z,1516410005.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:05.497Z,1516410005.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:05.862Z,1516410005.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:05.901Z,1516410005.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:06.256Z,1516410006.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:06.295Z,1516410006.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:06.660Z,1516410006.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:06.674Z,1516410006.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:07.060Z,1516410007.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:07.074Z,1516410007.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:07.454Z,1516410007.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:07.475Z,1516410007.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:07.858Z,1516410007.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:07.877Z,1516410007.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:08.275Z,1516410008.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:08.306Z,1516410008.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:08.675Z,1516410008.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:08.704Z,1516410008.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:09.067Z,1516410009.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:09.081Z,1516410009.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:09.460Z,1516410009.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:09.475Z,1516410009.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:09.860Z,1516410009.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:09.875Z,1516410009.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:10.261Z,1516410010.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:10.275Z,1516410010.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:10.660Z,1516410010.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:10.674Z,1516410010.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:11.062Z,1516410011.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:11.076Z,1516410011.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:11.466Z,1516410011.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:11.480Z,1516410011.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:11.874Z,1516410011.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:11.905Z,1516410011.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:12.262Z,1516410012.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:12.276Z,1516410012.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:12.660Z,1516410012.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:12.679Z,1516410012.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:13.060Z,1516410013.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:13.074Z,1516410013.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:13.458Z,1516410013.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:13.472Z,1516410013.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:13.857Z,1516410013.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:13.879Z,1516410013.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:14.269Z,1516410014.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:14.283Z,1516410014.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:14.668Z,1516410014.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:14.683Z,1516410014.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:15.069Z,1516410015.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:15.083Z,1516410015.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:15.464Z,1516410015.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:15.478Z,1516410015.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:15.863Z,1516410015.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:15.883Z,1516410015.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:16.260Z,1516410016.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:16.274Z,1516410016.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:16.654Z,1516410016.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:16.679Z,1516410016.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:17.069Z,1516410017.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:17.083Z,1516410017.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:17.468Z,1516410017.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:17.487Z,1516410017.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:17.869Z,1516410017.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:17.883Z,1516410017.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:18.262Z,1516410018.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:18.276Z,1516410018.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:18.657Z,1516410018.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:18.676Z,1516410018.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:19.054Z,1516410019.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:19.079Z,1516410019.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:19.464Z,1516410019.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:19.479Z,1516410019.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:19.870Z,1516410019.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:19.884Z,1516410019.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:20.274Z,1516410020.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:20.294Z,1516410020.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:23.366Z,1516410023.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:23.381Z,1516410023.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:23.498Z,1516410023.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:23.527Z,1516410023.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:23.839Z,1516410023.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:23.874Z,1516410023.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:24.245Z,1516410024.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:24.276Z,1516410024.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:24.635Z,1516410024.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:24.675Z,1516410024.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:25.046Z,1516410025.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:25.076Z,1516410025.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:25.454Z,1516410025.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:25.487Z,1516410025.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:25.838Z,1516410025.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:25.852Z,1516410025.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:26.238Z,1516410026.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:26.252Z,1516410026.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:26.639Z,1516410026.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:26.659Z,1516410026.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:27.036Z,1516410027.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:27.055Z,1516410027.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:27.437Z,1516410027.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:27.459Z,1516410027.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:27.840Z,1516410027.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:27.863Z,1516410027.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:28.254Z,1516410028.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:28.286Z,1516410028.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:28.654Z,1516410028.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:28.686Z,1516410028.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:29.042Z,1516410029.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:29.056Z,1516410029.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:29.442Z,1516410029.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:29.457Z,1516410029.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:29.837Z,1516410029.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:29.855Z,1516410029.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:30.242Z,1516410030.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:30.256Z,1516410030.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:30.637Z,1516410030.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:30.660Z,1516410030.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:31.019Z,1516410031.019 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T01:00:31.019Z,1516410031.019 [NAL9602] Data Fault, FailCount= 1
2018-01-20T01:00:31.019Z,1516410031.019 [NAL9602](ERROR): Data Fault
2018-01-20T01:00:31.049Z,1516410031.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:31.072Z,1516410031.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:31.097Z,1516410031.097 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T01:00:31.415Z,1516410031.415 [NAL9602](INFO): Powering down
2018-01-20T01:00:31.443Z,1516410031.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:31.494Z,1516410031.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:31.843Z,1516410031.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:31.858Z,1516410031.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:32.238Z,1516410032.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:32.252Z,1516410032.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:32.265Z,1516410032.265 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T01:00:32.265Z,1516410032.265 [NAL9602] No Fault, FailCount= 1
2018-01-20T01:00:32.646Z,1516410032.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:32.660Z,1516410032.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:33.029Z,1516410033.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:33.054Z,1516410033.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:33.447Z,1516410033.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:33.461Z,1516410033.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:33.844Z,1516410033.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:33.858Z,1516410033.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:34.229Z,1516410034.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:34.260Z,1516410034.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:34.636Z,1516410034.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:34.660Z,1516410034.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:35.029Z,1516410035.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:35.063Z,1516410035.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:35.435Z,1516410035.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:35.460Z,1516410035.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:35.850Z,1516410035.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:35.870Z,1516410035.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:36.232Z,1516410036.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:36.262Z,1516410036.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:36.634Z,1516410036.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:36.668Z,1516410036.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:37.031Z,1516410037.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:37.066Z,1516410037.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:37.426Z,1516410037.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:37.443Z,1516410037.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:37.838Z,1516410037.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:37.868Z,1516410037.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:38.235Z,1516410038.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:38.249Z,1516410038.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:38.632Z,1516410038.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:38.647Z,1516410038.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:39.042Z,1516410039.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:39.056Z,1516410039.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:39.437Z,1516410039.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:39.451Z,1516410039.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:39.838Z,1516410039.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:39.853Z,1516410039.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:40.239Z,1516410040.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:40.254Z,1516410040.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:40.638Z,1516410040.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:40.659Z,1516410040.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:41.033Z,1516410041.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:41.047Z,1516410041.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:41.439Z,1516410041.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:41.454Z,1516410041.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:41.836Z,1516410041.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:41.850Z,1516410041.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:42.232Z,1516410042.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:42.252Z,1516410042.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:42.642Z,1516410042.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:42.656Z,1516410042.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:43.040Z,1516410043.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:43.065Z,1516410043.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:43.442Z,1516410043.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:43.456Z,1516410043.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:43.845Z,1516410043.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:43.860Z,1516410043.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:44.243Z,1516410044.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:44.257Z,1516410044.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:44.645Z,1516410044.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:44.659Z,1516410044.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:45.043Z,1516410045.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:45.057Z,1516410045.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:45.441Z,1516410045.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:45.457Z,1516410045.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:45.839Z,1516410045.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:45.862Z,1516410045.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:46.238Z,1516410046.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:46.253Z,1516410046.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:46.638Z,1516410046.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:46.651Z,1516410046.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:47.036Z,1516410047.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:47.063Z,1516410047.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:47.444Z,1516410047.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:47.451Z,1516410047.451 [PNI_TCM](ERROR): CRC does not match. Expected:0x53672 got:0x51521
2018-01-20T01:00:47.489Z,1516410047.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:47.841Z,1516410047.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:47.856Z,1516410047.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:48.238Z,1516410048.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:48.252Z,1516410048.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:48.642Z,1516410048.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:48.684Z,1516410048.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:49.050Z,1516410049.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:49.056Z,1516410049.056 [PNI_TCM](ERROR): CRC does not match. Expected:0x5355 got:0x16817
2018-01-20T01:00:49.093Z,1516410049.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:49.447Z,1516410049.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:49.460Z,1516410049.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:49.844Z,1516410049.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:49.859Z,1516410049.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:50.238Z,1516410050.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:50.271Z,1516410050.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:50.637Z,1516410050.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:50.646Z,1516410050.646 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2018-01-20T01:00:50.663Z,1516410050.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:51.046Z,1516410051.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:51.061Z,1516410051.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:51.445Z,1516410051.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:51.459Z,1516410051.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:51.824Z,1516410051.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:51.854Z,1516410051.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:52.244Z,1516410052.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:52.260Z,1516410052.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:52.646Z,1516410052.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:52.660Z,1516410052.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:53.039Z,1516410053.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:53.052Z,1516410053.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:53.443Z,1516410053.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:53.486Z,1516410053.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:53.839Z,1516410053.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:53.848Z,1516410053.848 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2018-01-20T01:00:53.889Z,1516410053.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:54.224Z,1516410054.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:54.253Z,1516410054.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:54.646Z,1516410054.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:54.652Z,1516410054.652 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2018-01-20T01:00:54.687Z,1516410054.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:55.039Z,1516410055.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:55.071Z,1516410055.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:55.443Z,1516410055.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:55.460Z,1516410055.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:55.844Z,1516410055.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:55.858Z,1516410055.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:56.246Z,1516410056.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:56.260Z,1516410056.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:56.643Z,1516410056.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:56.668Z,1516410056.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:57.040Z,1516410057.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:57.058Z,1516410057.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:57.439Z,1516410057.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:57.462Z,1516410057.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:57.824Z,1516410057.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:57.859Z,1516410057.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:58.242Z,1516410058.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:58.286Z,1516410058.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:58.642Z,1516410058.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:58.660Z,1516410058.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:59.024Z,1516410059.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:59.056Z,1516410059.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:59.447Z,1516410059.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:59.461Z,1516410059.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:00:59.830Z,1516410059.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:00:59.865Z,1516410059.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:00.224Z,1516410060.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:00.238Z,1516410060.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:00.631Z,1516410060.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:00.668Z,1516410060.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:01.031Z,1516410061.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:01.066Z,1516410061.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:01.428Z,1516410061.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:01.442Z,1516410061.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:01.818Z,1516410061.818 [NAL9602](INFO): Powering up NAL9602
2018-01-20T01:01:01.836Z,1516410061.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:01.871Z,1516410061.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:02.235Z,1516410062.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:02.274Z,1516410062.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:02.641Z,1516410062.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:02.656Z,1516410062.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:03.032Z,1516410063.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:03.077Z,1516410063.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:03.439Z,1516410063.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:03.481Z,1516410063.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:03.831Z,1516410063.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:03.845Z,1516410063.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:04.240Z,1516410064.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:04.277Z,1516410064.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:04.639Z,1516410064.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:04.695Z,1516410064.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:05.031Z,1516410065.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:05.045Z,1516410065.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:05.439Z,1516410065.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:05.457Z,1516410065.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:05.837Z,1516410065.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:05.855Z,1516410065.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:06.236Z,1516410066.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:06.249Z,1516410066.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:06.640Z,1516410066.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:06.654Z,1516410066.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:07.037Z,1516410067.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:07.053Z,1516410067.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:07.440Z,1516410067.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:07.457Z,1516410067.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:07.840Z,1516410067.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:07.855Z,1516410067.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:08.240Z,1516410068.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:08.254Z,1516410068.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:08.640Z,1516410068.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:08.654Z,1516410068.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:09.036Z,1516410069.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:09.055Z,1516410069.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:09.436Z,1516410069.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:09.454Z,1516410069.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:09.840Z,1516410069.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:09.853Z,1516410069.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:10.240Z,1516410070.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:10.254Z,1516410070.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:10.640Z,1516410070.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:10.658Z,1516410070.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:11.036Z,1516410071.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:11.050Z,1516410071.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:11.447Z,1516410071.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:11.461Z,1516410071.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:11.843Z,1516410071.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:11.857Z,1516410071.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:12.243Z,1516410072.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:12.262Z,1516410072.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:12.646Z,1516410072.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:12.660Z,1516410072.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:13.014Z,1516410073.014 [NAL9602](INFO): NAL9602 initialized
2018-01-20T01:01:13.043Z,1516410073.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:13.063Z,1516410073.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:13.443Z,1516410073.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:13.457Z,1516410073.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:13.846Z,1516410073.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:13.864Z,1516410073.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:14.250Z,1516410074.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:14.264Z,1516410074.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:14.646Z,1516410074.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:14.666Z,1516410074.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:15.034Z,1516410075.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:15.052Z,1516410075.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:15.446Z,1516410075.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:15.464Z,1516410075.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:15.841Z,1516410075.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:15.855Z,1516410075.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:16.250Z,1516410076.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:16.264Z,1516410076.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:16.658Z,1516410076.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:16.691Z,1516410076.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:17.049Z,1516410077.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:17.067Z,1516410077.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:17.440Z,1516410077.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:17.454Z,1516410077.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:17.851Z,1516410077.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:17.871Z,1516410077.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:18.254Z,1516410078.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:18.269Z,1516410078.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:18.654Z,1516410078.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:18.673Z,1516410078.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:19.054Z,1516410079.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:19.068Z,1516410079.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:19.448Z,1516410079.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:19.463Z,1516410079.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:19.837Z,1516410079.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:19.863Z,1516410079.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:20.254Z,1516410080.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:20.274Z,1516410080.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:20.654Z,1516410080.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:20.669Z,1516410080.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:23.751Z,1516410083.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:23.771Z,1516410083.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:23.875Z,1516410083.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:23.905Z,1516410083.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:24.251Z,1516410084.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:24.273Z,1516410084.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:24.663Z,1516410084.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:24.677Z,1516410084.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:25.060Z,1516410085.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:25.079Z,1516410085.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:25.466Z,1516410085.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:25.487Z,1516410085.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:25.867Z,1516410085.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:25.881Z,1516410085.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:26.270Z,1516410086.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:26.293Z,1516410086.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:26.659Z,1516410086.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:26.683Z,1516410086.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:27.060Z,1516410087.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:27.073Z,1516410087.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:27.460Z,1516410087.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:27.475Z,1516410087.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:27.847Z,1516410087.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:27.878Z,1516410087.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:28.271Z,1516410088.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:28.295Z,1516410088.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:28.666Z,1516410088.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:28.680Z,1516410088.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:29.066Z,1516410089.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:29.080Z,1516410089.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:29.448Z,1516410089.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:29.474Z,1516410089.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:29.843Z,1516410089.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:29.868Z,1516410089.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:30.266Z,1516410090.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:30.280Z,1516410090.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:30.664Z,1516410090.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:30.691Z,1516410090.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:31.062Z,1516410091.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:31.076Z,1516410091.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:31.448Z,1516410091.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:31.473Z,1516410091.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:31.844Z,1516410091.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:31.879Z,1516410091.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:32.270Z,1516410092.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:32.291Z,1516410092.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:32.670Z,1516410092.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:32.692Z,1516410092.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:33.070Z,1516410093.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:33.087Z,1516410093.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:33.448Z,1516410093.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:33.475Z,1516410093.475 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:33.475Z,1516410093.475 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2018-01-20T01:01:33.475Z,1516410093.475 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:01:33.481Z,1516410093.481 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:33.481Z,1516410093.481 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2018-01-20T01:01:33.481Z,1516410093.481 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:01:33.483Z,1516410093.483 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:33.483Z,1516410093.483 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 77
2018-01-20T01:01:33.483Z,1516410093.483 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:01:33.507Z,1516410093.507 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:01:33.507Z,1516410093.507 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:01:33.508Z,1516410093.508 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:01:33.847Z,1516410093.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:33.906Z,1516410093.906 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:01:33.906Z,1516410093.906 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2018-01-20T01:01:33.906Z,1516410093.906 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:01:33.906Z,1516410093.906 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2018-01-20T01:01:33.907Z,1516410093.907 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:01:33.907Z,1516410093.907 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 77
2018-01-20T01:01:34.258Z,1516410094.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:34.291Z,1516410094.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:01:34.291Z,1516410094.291 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:01:34.292Z,1516410094.292 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:01:34.292Z,1516410094.292 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:01:34.293Z,1516410094.293 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:01:34.294Z,1516410094.294 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:01:34.305Z,1516410094.305 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:01:34.305Z,1516410094.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:01:34.306Z,1516410094.306 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:01:34.670Z,1516410094.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:34.696Z,1516410094.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:01:34.697Z,1516410094.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:35.066Z,1516410095.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:35.087Z,1516410095.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:01:35.088Z,1516410095.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:35.453Z,1516410095.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:35.466Z,1516410095.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:01:35.467Z,1516410095.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:35.855Z,1516410095.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:35.874Z,1516410095.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:01:35.875Z,1516410095.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:36.262Z,1516410096.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:36.276Z,1516410096.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:01:36.277Z,1516410096.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:36.661Z,1516410096.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:36.682Z,1516410096.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:01:36.683Z,1516410096.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:37.062Z,1516410097.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:37.076Z,1516410097.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:01:37.077Z,1516410097.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:37.455Z,1516410097.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:37.474Z,1516410097.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:01:37.475Z,1516410097.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:37.852Z,1516410097.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:37.866Z,1516410097.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:01:37.867Z,1516410097.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:38.255Z,1516410098.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:38.269Z,1516410098.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:01:38.270Z,1516410098.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:38.662Z,1516410098.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:38.676Z,1516410098.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:01:38.677Z,1516410098.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:39.066Z,1516410099.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:39.079Z,1516410099.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:01:39.080Z,1516410099.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:39.462Z,1516410099.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:39.476Z,1516410099.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:01:39.477Z,1516410099.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:39.855Z,1516410099.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:39.868Z,1516410099.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T01:01:39.870Z,1516410099.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:40.252Z,1516410100.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:40.265Z,1516410100.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:01:40.266Z,1516410100.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:40.654Z,1516410100.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:40.672Z,1516410100.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:01:40.673Z,1516410100.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:41.055Z,1516410101.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:41.068Z,1516410101.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:01:41.070Z,1516410101.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:41.461Z,1516410101.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:41.475Z,1516410101.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:01:41.476Z,1516410101.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:41.866Z,1516410101.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:41.880Z,1516410101.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:01:41.881Z,1516410101.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:42.265Z,1516410102.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:42.279Z,1516410102.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:01:42.280Z,1516410102.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:42.651Z,1516410102.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:42.664Z,1516410102.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:01:42.665Z,1516410102.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:43.058Z,1516410103.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:43.072Z,1516410103.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:01:43.073Z,1516410103.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:43.455Z,1516410103.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:43.474Z,1516410103.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:01:43.475Z,1516410103.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:43.852Z,1516410103.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:43.870Z,1516410103.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:01:43.871Z,1516410103.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:44.259Z,1516410104.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:44.278Z,1516410104.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:01:44.279Z,1516410104.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:44.664Z,1516410104.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:44.683Z,1516410104.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:01:44.683Z,1516410104.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:45.066Z,1516410105.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:45.079Z,1516410105.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:01:45.080Z,1516410105.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:45.465Z,1516410105.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:45.483Z,1516410105.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:01:45.483Z,1516410105.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:45.855Z,1516410105.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:45.874Z,1516410105.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:01:45.875Z,1516410105.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:46.252Z,1516410106.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:46.270Z,1516410106.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:01:46.271Z,1516410106.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:46.660Z,1516410106.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:46.674Z,1516410106.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:01:46.675Z,1516410106.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:47.054Z,1516410107.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:47.068Z,1516410107.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:01:47.069Z,1516410107.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:47.462Z,1516410107.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:47.476Z,1516410107.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:01:47.477Z,1516410107.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:47.866Z,1516410107.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:47.886Z,1516410107.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:01:47.887Z,1516410107.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:48.265Z,1516410108.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:48.279Z,1516410108.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:01:48.280Z,1516410108.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:48.643Z,1516410108.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:48.677Z,1516410108.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:01:48.678Z,1516410108.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:49.059Z,1516410109.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:49.072Z,1516410109.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:01:49.074Z,1516410109.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:49.450Z,1516410109.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:49.472Z,1516410109.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:01:49.473Z,1516410109.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:49.844Z,1516410109.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:49.870Z,1516410109.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:01:49.870Z,1516410109.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:50.259Z,1516410110.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:50.272Z,1516410110.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:01:50.274Z,1516410110.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:50.665Z,1516410110.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:50.679Z,1516410110.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:01:50.680Z,1516410110.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:51.066Z,1516410111.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:51.079Z,1516410111.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:01:51.080Z,1516410111.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:51.465Z,1516410111.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:51.479Z,1516410111.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:01:51.480Z,1516410111.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:51.855Z,1516410111.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:51.874Z,1516410111.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:01:51.875Z,1516410111.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:52.243Z,1516410112.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:52.274Z,1516410112.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:01:52.275Z,1516410112.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:52.660Z,1516410112.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:52.674Z,1516410112.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:01:52.675Z,1516410112.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:53.050Z,1516410113.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:53.071Z,1516410113.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:01:53.072Z,1516410113.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:53.462Z,1516410113.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:53.476Z,1516410113.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:53.869Z,1516410113.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:53.887Z,1516410113.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:54.266Z,1516410114.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:54.280Z,1516410114.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:54.643Z,1516410114.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:54.676Z,1516410114.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:55.059Z,1516410115.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:55.079Z,1516410115.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:55.464Z,1516410115.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:55.478Z,1516410115.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:55.858Z,1516410115.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:55.878Z,1516410115.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:56.259Z,1516410116.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:56.273Z,1516410116.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:56.669Z,1516410116.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:56.684Z,1516410116.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:57.070Z,1516410117.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:57.084Z,1516410117.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:57.458Z,1516410117.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:57.476Z,1516410117.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:57.860Z,1516410117.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:57.879Z,1516410117.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:58.248Z,1516410118.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:58.283Z,1516410118.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:58.662Z,1516410118.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:58.676Z,1516410118.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:59.058Z,1516410119.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:59.077Z,1516410119.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:59.462Z,1516410119.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:59.482Z,1516410119.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:01:59.867Z,1516410119.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:01:59.882Z,1516410119.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:00.274Z,1516410120.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:00.288Z,1516410120.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:00.648Z,1516410120.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:00.684Z,1516410120.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:01.046Z,1516410121.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:01.060Z,1516410121.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:01.447Z,1516410121.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:01.487Z,1516410121.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:01.854Z,1516410121.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:01.867Z,1516410121.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:02.252Z,1516410122.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:02.267Z,1516410122.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:02.667Z,1516410122.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:02.692Z,1516410122.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:03.067Z,1516410123.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:03.091Z,1516410123.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:03.463Z,1516410123.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:03.493Z,1516410123.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:03.855Z,1516410123.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:03.871Z,1516410123.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:04.255Z,1516410124.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:04.269Z,1516410124.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:04.687Z,1516410124.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:04.702Z,1516410124.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:05.052Z,1516410125.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:05.075Z,1516410125.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:05.470Z,1516410125.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:05.501Z,1516410125.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:05.858Z,1516410125.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:05.872Z,1516410125.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:06.258Z,1516410126.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:06.272Z,1516410126.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:06.656Z,1516410126.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:06.670Z,1516410126.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:07.046Z,1516410127.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:07.066Z,1516410127.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:07.453Z,1516410127.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:07.471Z,1516410127.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:07.852Z,1516410127.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:07.867Z,1516410127.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:08.252Z,1516410128.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:08.266Z,1516410128.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:08.670Z,1516410128.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:08.700Z,1516410128.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:09.058Z,1516410129.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:09.078Z,1516410129.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:09.470Z,1516410129.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:09.499Z,1516410129.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:09.853Z,1516410129.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:09.875Z,1516410129.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:10.259Z,1516410130.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:10.272Z,1516410130.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:10.658Z,1516410130.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:10.672Z,1516410130.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:11.055Z,1516410131.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:11.069Z,1516410131.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:11.461Z,1516410131.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:11.475Z,1516410131.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:11.861Z,1516410131.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:11.883Z,1516410131.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:12.262Z,1516410132.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:12.276Z,1516410132.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:12.660Z,1516410132.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:12.673Z,1516410132.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:13.054Z,1516410133.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:13.106Z,1516410133.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:13.455Z,1516410133.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:13.469Z,1516410133.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:13.852Z,1516410133.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:13.866Z,1516410133.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:14.259Z,1516410134.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:14.273Z,1516410134.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:14.662Z,1516410134.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:14.676Z,1516410134.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:15.066Z,1516410135.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:15.079Z,1516410135.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:15.462Z,1516410135.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:15.477Z,1516410135.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:15.855Z,1516410135.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:15.875Z,1516410135.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:16.260Z,1516410136.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:16.273Z,1516410136.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:16.658Z,1516410136.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:16.672Z,1516410136.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:17.055Z,1516410137.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:17.069Z,1516410137.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:17.470Z,1516410137.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:17.484Z,1516410137.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:17.861Z,1516410137.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:17.875Z,1516410137.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:18.262Z,1516410138.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:18.276Z,1516410138.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:18.659Z,1516410138.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:18.673Z,1516410138.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:19.053Z,1516410139.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:19.067Z,1516410139.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:19.455Z,1516410139.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:19.469Z,1516410139.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:19.852Z,1516410139.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:19.866Z,1516410139.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:20.259Z,1516410140.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:20.273Z,1516410140.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:20.661Z,1516410140.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:20.683Z,1516410140.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:23.773Z,1516410143.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:23.787Z,1516410143.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:23.898Z,1516410143.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:23.935Z,1516410143.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:24.265Z,1516410144.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:24.279Z,1516410144.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:24.668Z,1516410144.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:24.687Z,1516410144.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:25.057Z,1516410145.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:25.079Z,1516410145.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:25.482Z,1516410145.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:25.511Z,1516410145.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:25.870Z,1516410145.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:25.884Z,1516410145.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:26.270Z,1516410146.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:26.287Z,1516410146.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:26.664Z,1516410146.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:26.683Z,1516410146.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:27.063Z,1516410147.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:27.077Z,1516410147.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:27.462Z,1516410147.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:27.477Z,1516410147.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:27.867Z,1516410147.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:27.881Z,1516410147.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:28.263Z,1516410148.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:28.283Z,1516410148.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:28.670Z,1516410148.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:28.685Z,1516410148.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:29.078Z,1516410149.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:29.110Z,1516410149.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:29.481Z,1516410149.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:29.514Z,1516410149.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:29.857Z,1516410149.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:29.879Z,1516410149.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:30.268Z,1516410150.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:30.287Z,1516410150.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:30.669Z,1516410150.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:30.683Z,1516410150.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:31.065Z,1516410151.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:31.079Z,1516410151.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:31.482Z,1516410151.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:31.511Z,1516410151.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:31.882Z,1516410151.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:31.913Z,1516410151.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:32.270Z,1516410152.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:32.284Z,1516410152.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:32.668Z,1516410152.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:32.687Z,1516410152.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:33.068Z,1516410153.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:33.082Z,1516410153.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:33.464Z,1516410153.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:33.482Z,1516410153.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:33.870Z,1516410153.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:33.884Z,1516410153.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:34.269Z,1516410154.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:34.283Z,1516410154.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:34.670Z,1516410154.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:34.687Z,1516410154.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:35.082Z,1516410155.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:35.111Z,1516410155.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:35.481Z,1516410155.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:35.514Z,1516410155.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:35.862Z,1516410155.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:35.876Z,1516410155.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:36.265Z,1516410156.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:36.284Z,1516410156.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:36.670Z,1516410156.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:36.684Z,1516410156.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:37.065Z,1516410157.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:37.084Z,1516410157.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:37.474Z,1516410157.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:37.488Z,1516410157.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:37.882Z,1516410157.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:37.913Z,1516410157.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:38.271Z,1516410158.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:38.287Z,1516410158.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:38.671Z,1516410158.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:38.685Z,1516410158.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:39.066Z,1516410159.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:39.080Z,1516410159.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:39.466Z,1516410159.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:39.488Z,1516410159.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:39.873Z,1516410159.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:39.887Z,1516410159.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:40.265Z,1516410160.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:40.279Z,1516410160.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:40.676Z,1516410160.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:40.691Z,1516410160.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:41.075Z,1516410161.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:41.095Z,1516410161.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:41.478Z,1516410161.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:41.493Z,1516410161.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:41.858Z,1516410161.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:41.880Z,1516410161.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:42.268Z,1516410162.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:42.283Z,1516410162.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:42.672Z,1516410162.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:42.686Z,1516410162.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:43.066Z,1516410163.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:43.080Z,1516410163.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:43.473Z,1516410163.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:43.488Z,1516410163.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:43.878Z,1516410163.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:43.892Z,1516410163.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:44.272Z,1516410164.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:44.287Z,1516410164.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:44.667Z,1516410164.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:44.683Z,1516410164.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:45.061Z,1516410165.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:45.090Z,1516410165.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:45.465Z,1516410165.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:45.479Z,1516410165.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:45.863Z,1516410165.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:45.890Z,1516410165.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:46.264Z,1516410166.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:46.283Z,1516410166.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:46.674Z,1516410166.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:46.689Z,1516410166.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:47.074Z,1516410167.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:47.088Z,1516410167.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:47.473Z,1516410167.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:47.494Z,1516410167.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:47.857Z,1516410167.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:47.878Z,1516410167.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:48.267Z,1516410168.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:48.281Z,1516410168.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:48.669Z,1516410168.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:48.682Z,1516410168.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:49.058Z,1516410169.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:49.078Z,1516410169.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:49.472Z,1516410169.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:49.487Z,1516410169.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:49.873Z,1516410169.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:49.894Z,1516410169.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:50.271Z,1516410170.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:50.287Z,1516410170.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:50.671Z,1516410170.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:50.685Z,1516410170.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:51.061Z,1516410171.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:51.087Z,1516410171.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:51.467Z,1516410171.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:51.487Z,1516410171.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:51.871Z,1516410171.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:51.887Z,1516410171.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:52.271Z,1516410172.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:52.285Z,1516410172.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:52.674Z,1516410172.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:52.689Z,1516410172.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:53.074Z,1516410173.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:53.095Z,1516410173.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:53.474Z,1516410173.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:53.491Z,1516410173.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:53.861Z,1516410173.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:53.875Z,1516410173.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:54.267Z,1516410174.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:54.281Z,1516410174.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:54.664Z,1516410174.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:54.678Z,1516410174.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:55.065Z,1516410175.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:55.079Z,1516410175.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:55.471Z,1516410175.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:55.487Z,1516410175.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:55.873Z,1516410175.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:55.887Z,1516410175.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:56.271Z,1516410176.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:56.287Z,1516410176.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:56.671Z,1516410176.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:56.685Z,1516410176.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:57.071Z,1516410177.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:57.085Z,1516410177.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:57.471Z,1516410177.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:57.486Z,1516410177.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:57.871Z,1516410177.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:57.885Z,1516410177.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:58.268Z,1516410178.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:58.282Z,1516410178.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:58.672Z,1516410178.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:58.687Z,1516410178.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:59.074Z,1516410179.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:59.088Z,1516410179.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:59.474Z,1516410179.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:59.494Z,1516410179.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:02:59.860Z,1516410179.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:02:59.878Z,1516410179.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:00.263Z,1516410180.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:00.286Z,1516410180.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:00.668Z,1516410180.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:00.692Z,1516410180.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:01.053Z,1516410181.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:01.087Z,1516410181.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:01.477Z,1516410181.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:01.491Z,1516410181.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:01.878Z,1516410181.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:01.898Z,1516410181.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:02.277Z,1516410182.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:02.291Z,1516410182.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:02.667Z,1516410182.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:02.681Z,1516410182.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:03.064Z,1516410183.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:03.086Z,1516410183.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:03.471Z,1516410183.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:03.487Z,1516410183.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:03.867Z,1516410183.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:03.882Z,1516410183.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:04.264Z,1516410184.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:04.286Z,1516410184.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:04.676Z,1516410184.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:04.699Z,1516410184.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:05.078Z,1516410185.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:05.099Z,1516410185.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:05.478Z,1516410185.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:05.499Z,1516410185.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:05.853Z,1516410185.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:05.883Z,1516410185.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:06.271Z,1516410186.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:06.287Z,1516410186.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:06.660Z,1516410186.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:06.694Z,1516410186.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:07.057Z,1516410187.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:07.091Z,1516410187.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:07.482Z,1516410187.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:07.496Z,1516410187.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:07.884Z,1516410187.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:07.906Z,1516410187.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:08.266Z,1516410188.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:08.300Z,1516410188.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:08.659Z,1516410188.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:08.695Z,1516410188.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:09.063Z,1516410189.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:09.096Z,1516410189.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:09.455Z,1516410189.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:09.495Z,1516410189.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:09.861Z,1516410189.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:09.875Z,1516410189.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:10.261Z,1516410190.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:10.275Z,1516410190.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:10.678Z,1516410190.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:10.707Z,1516410190.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:11.082Z,1516410191.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:11.111Z,1516410191.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:11.478Z,1516410191.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:11.511Z,1516410191.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:11.867Z,1516410191.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:11.907Z,1516410191.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:12.263Z,1516410192.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:12.285Z,1516410192.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:12.666Z,1516410192.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:12.687Z,1516410192.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:13.061Z,1516410193.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:13.080Z,1516410193.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:13.472Z,1516410193.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:13.487Z,1516410193.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:13.874Z,1516410193.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:13.888Z,1516410193.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:14.274Z,1516410194.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:14.289Z,1516410194.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:14.672Z,1516410194.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:14.687Z,1516410194.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:15.073Z,1516410195.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:15.087Z,1516410195.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:15.472Z,1516410195.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:15.486Z,1516410195.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:15.869Z,1516410195.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:15.883Z,1516410195.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:16.273Z,1516410196.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:16.287Z,1516410196.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:16.674Z,1516410196.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:16.689Z,1516410196.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:17.075Z,1516410197.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:17.089Z,1516410197.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:17.475Z,1516410197.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:17.495Z,1516410197.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:17.870Z,1516410197.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:17.884Z,1516410197.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:18.269Z,1516410198.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:18.287Z,1516410198.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:18.666Z,1516410198.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:18.681Z,1516410198.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:19.058Z,1516410199.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:19.090Z,1516410199.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:19.474Z,1516410199.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:19.495Z,1516410199.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:19.879Z,1516410199.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:19.894Z,1516410199.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:20.274Z,1516410200.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:20.291Z,1516410200.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:20.673Z,1516410200.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:20.688Z,1516410200.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:23.763Z,1516410203.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:23.777Z,1516410203.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:23.887Z,1516410203.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:23.927Z,1516410203.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:24.246Z,1516410204.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:24.275Z,1516410204.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:24.641Z,1516410204.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:24.674Z,1516410204.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:25.031Z,1516410205.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:25.067Z,1516410205.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:25.431Z,1516410205.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:25.451Z,1516410205.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:25.829Z,1516410205.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:25.843Z,1516410205.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:26.232Z,1516410206.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:26.247Z,1516410206.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:26.646Z,1516410206.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:26.675Z,1516410206.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:27.042Z,1516410207.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:27.055Z,1516410207.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:27.446Z,1516410207.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:27.475Z,1516410207.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:27.821Z,1516410207.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:27.835Z,1516410207.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:28.223Z,1516410208.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:28.245Z,1516410208.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:28.624Z,1516410208.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:28.651Z,1516410208.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:29.027Z,1516410209.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:29.058Z,1516410209.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:29.438Z,1516410209.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:29.464Z,1516410209.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:29.842Z,1516410209.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:29.867Z,1516410209.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:30.242Z,1516410210.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:30.267Z,1516410210.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:30.632Z,1516410210.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:30.670Z,1516410210.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:31.027Z,1516410211.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:31.047Z,1516410211.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:31.442Z,1516410211.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:31.474Z,1516410211.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:31.842Z,1516410211.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:31.874Z,1516410211.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:32.238Z,1516410212.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:32.252Z,1516410212.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:32.629Z,1516410212.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:32.651Z,1516410212.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:33.028Z,1516410213.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:33.042Z,1516410213.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:33.442Z,1516410213.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:33.456Z,1516410213.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:33.846Z,1516410213.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:33.860Z,1516410213.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:34.238Z,1516410214.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:34.258Z,1516410214.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:34.634Z,1516410214.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:34.648Z,1516410214.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:35.031Z,1516410215.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:35.045Z,1516410215.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:35.437Z,1516410215.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:35.451Z,1516410215.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:35.838Z,1516410215.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:35.852Z,1516410215.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:36.238Z,1516410216.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:36.252Z,1516410216.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:36.636Z,1516410216.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:36.649Z,1516410216.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:37.035Z,1516410217.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:37.049Z,1516410217.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:37.431Z,1516410217.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:37.445Z,1516410217.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:37.837Z,1516410217.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:37.858Z,1516410217.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:38.242Z,1516410218.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:38.256Z,1516410218.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:38.638Z,1516410218.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:38.652Z,1516410218.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:39.036Z,1516410219.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:39.049Z,1516410219.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:39.435Z,1516410219.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:39.449Z,1516410219.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:39.835Z,1516410219.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:39.849Z,1516410219.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:40.228Z,1516410220.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:40.247Z,1516410220.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:40.638Z,1516410220.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:40.653Z,1516410220.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:41.042Z,1516410221.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:41.056Z,1516410221.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:41.438Z,1516410221.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:41.458Z,1516410221.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:41.835Z,1516410221.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:41.850Z,1516410221.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:42.235Z,1516410222.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:42.253Z,1516410222.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:42.628Z,1516410222.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:42.641Z,1516410222.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:43.035Z,1516410223.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:43.055Z,1516410223.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:43.431Z,1516410223.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:43.451Z,1516410223.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:43.838Z,1516410223.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:43.852Z,1516410223.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:44.242Z,1516410224.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:44.256Z,1516410224.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:44.638Z,1516410224.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:44.652Z,1516410224.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:45.035Z,1516410225.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:45.049Z,1516410225.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:45.435Z,1516410225.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:45.449Z,1516410225.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:45.832Z,1516410225.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:45.846Z,1516410225.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:46.231Z,1516410226.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:46.245Z,1516410226.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:46.638Z,1516410226.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:46.653Z,1516410226.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:47.042Z,1516410227.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:47.056Z,1516410227.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:47.438Z,1516410227.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:47.458Z,1516410227.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:47.833Z,1516410227.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:47.847Z,1516410227.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:48.236Z,1516410228.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:48.255Z,1516410228.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:48.636Z,1516410228.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:48.649Z,1516410228.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:49.035Z,1516410229.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:49.055Z,1516410229.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:49.435Z,1516410229.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:49.449Z,1516410229.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:49.839Z,1516410229.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:49.853Z,1516410229.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:50.238Z,1516410230.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:50.252Z,1516410230.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:50.637Z,1516410230.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:50.659Z,1516410230.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:51.037Z,1516410231.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:51.051Z,1516410231.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:51.434Z,1516410231.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:51.448Z,1516410231.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:51.832Z,1516410231.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:51.850Z,1516410231.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:52.235Z,1516410232.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:52.249Z,1516410232.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:52.642Z,1516410232.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:52.657Z,1516410232.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:53.042Z,1516410233.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:53.056Z,1516410233.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:53.440Z,1516410233.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:53.453Z,1516410233.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:53.828Z,1516410233.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:53.850Z,1516410233.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:54.232Z,1516410234.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:54.247Z,1516410234.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:54.638Z,1516410234.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:54.652Z,1516410234.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:55.024Z,1516410235.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:55.051Z,1516410235.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:55.455Z,1516410235.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:55.494Z,1516410235.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:55.894Z,1516410235.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:55.908Z,1516410235.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:56.239Z,1516410236.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:56.281Z,1516410236.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:56.645Z,1516410236.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:56.673Z,1516410236.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:57.025Z,1516410237.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:57.080Z,1516410237.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:57.425Z,1516410237.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:57.457Z,1516410237.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:57.834Z,1516410237.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:57.870Z,1516410237.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:58.223Z,1516410238.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:58.281Z,1516410238.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:58.666Z,1516410238.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:58.682Z,1516410238.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:59.047Z,1516410239.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:59.061Z,1516410239.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:59.436Z,1516410239.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:59.471Z,1516410239.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:03:59.825Z,1516410239.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:03:59.844Z,1516410239.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:00.242Z,1516410240.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:00.280Z,1516410240.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:00.629Z,1516410240.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:00.651Z,1516410240.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:01.026Z,1516410241.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:01.060Z,1516410241.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:01.440Z,1516410241.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:01.480Z,1516410241.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:01.839Z,1516410241.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:01.870Z,1516410241.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:02.240Z,1516410242.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:02.280Z,1516410242.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:02.648Z,1516410242.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:02.683Z,1516410242.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:03.034Z,1516410243.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:03.112Z,1516410243.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:03.434Z,1516410243.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:03.460Z,1516410243.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:03.834Z,1516410243.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:03.856Z,1516410243.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:04.225Z,1516410244.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:04.306Z,1516410244.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:04.647Z,1516410244.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:04.709Z,1516410244.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:05.048Z,1516410245.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:05.071Z,1516410245.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:05.448Z,1516410245.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:05.474Z,1516410245.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:05.825Z,1516410245.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:05.863Z,1516410245.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:06.233Z,1516410246.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:06.263Z,1516410246.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:06.625Z,1516410246.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:06.671Z,1516410246.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:07.026Z,1516410247.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:07.060Z,1516410247.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:07.425Z,1516410247.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:07.464Z,1516410247.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:07.843Z,1516410247.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:07.876Z,1516410247.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:08.245Z,1516410248.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:08.279Z,1516410248.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:08.652Z,1516410248.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:08.675Z,1516410248.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:09.044Z,1516410249.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:09.089Z,1516410249.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:09.433Z,1516410249.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:09.492Z,1516410249.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:09.834Z,1516410249.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:09.861Z,1516410249.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:10.225Z,1516410250.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:10.291Z,1516410250.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:10.643Z,1516410250.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:10.657Z,1516410250.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:11.043Z,1516410251.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:11.063Z,1516410251.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:11.447Z,1516410251.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:11.466Z,1516410251.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:11.821Z,1516410251.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:11.847Z,1516410251.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:12.227Z,1516410252.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:12.259Z,1516410252.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:12.619Z,1516410252.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:12.633Z,1516410252.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:13.021Z,1516410253.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:13.036Z,1516410253.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:13.435Z,1516410253.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:13.466Z,1516410253.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:13.834Z,1516410253.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:13.868Z,1516410253.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:14.242Z,1516410254.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:14.267Z,1516410254.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:14.642Z,1516410254.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:14.667Z,1516410254.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:15.031Z,1516410255.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:15.070Z,1516410255.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:15.418Z,1516410255.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:15.432Z,1516410255.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:15.832Z,1516410255.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:15.869Z,1516410255.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:16.223Z,1516410256.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:16.237Z,1516410256.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:16.642Z,1516410256.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:16.671Z,1516410256.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:17.052Z,1516410257.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:17.074Z,1516410257.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:17.442Z,1516410257.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:17.470Z,1516410257.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:17.820Z,1516410257.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:17.843Z,1516410257.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:18.228Z,1516410258.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:18.243Z,1516410258.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:18.632Z,1516410258.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:18.646Z,1516410258.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:19.028Z,1516410259.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:19.042Z,1516410259.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:19.430Z,1516410259.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:19.444Z,1516410259.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:19.846Z,1516410259.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:19.877Z,1516410259.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:19.880Z,1516410259.880 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T00:59:19.5Z
2018-01-20T01:04:19.880Z,1516410259.880 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T01:04:19.881Z,1516410259.881 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T01:04:20.242Z,1516410260.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:20.256Z,1516410260.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:20.694Z,1516410260.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:20.708Z,1516410260.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:21.036Z,1516410261.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:21.049Z,1516410261.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:24.122Z,1516410264.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:24.139Z,1516410264.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:24.239Z,1516410264.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:24.259Z,1516410264.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:24.606Z,1516410264.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:24.627Z,1516410264.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:25.010Z,1516410265.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:25.032Z,1516410265.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:25.410Z,1516410265.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:25.432Z,1516410265.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:25.799Z,1516410265.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:25.826Z,1516410265.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:29.014Z,1516410269.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:29.038Z,1516410269.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:29.122Z,1516410269.122 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0096.lzma
2018-01-20T01:04:29.146Z,1516410269.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:29.189Z,1516410269.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:29.506Z,1516410269.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:29.535Z,1516410269.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:29.863Z,1516410269.863 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0096.lzma.bak
2018-01-20T01:04:29.863Z,1516410269.863 [DataOverHttps](INFO): SBD MOMSN=7725559
2018-01-20T01:04:29.914Z,1516410269.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:29.937Z,1516410269.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:30.398Z,1516410270.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:30.412Z,1516410270.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:30.693Z,1516410270.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:30.708Z,1516410270.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:33.984Z,1516410273.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:33.999Z,1516410273.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:34.095Z,1516410274.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:34.135Z,1516410274.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:34.466Z,1516410274.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:34.491Z,1516410274.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:34.491Z,1516410274.491 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2018-01-20T01:04:34.491Z,1516410274.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:04:34.493Z,1516410274.493 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:34.493Z,1516410274.493 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2018-01-20T01:04:34.493Z,1516410274.493 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:04:34.495Z,1516410274.495 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:34.495Z,1516410274.495 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 78
2018-01-20T01:04:34.495Z,1516410274.495 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:04:34.507Z,1516410274.507 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:04:34.507Z,1516410274.507 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:04:34.507Z,1516410274.507 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:04:34.866Z,1516410274.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:34.900Z,1516410274.900 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:04:34.900Z,1516410274.900 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2018-01-20T01:04:34.900Z,1516410274.900 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:04:34.900Z,1516410274.900 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2018-01-20T01:04:34.901Z,1516410274.901 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:04:34.901Z,1516410274.901 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 78
2018-01-20T01:04:35.266Z,1516410275.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:35.290Z,1516410275.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:04:35.290Z,1516410275.290 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:04:35.291Z,1516410275.291 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:04:35.291Z,1516410275.291 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:04:35.291Z,1516410275.291 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:04:35.292Z,1516410275.292 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:04:35.292Z,1516410275.292 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:04:35.292Z,1516410275.292 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:04:35.293Z,1516410275.293 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:04:35.658Z,1516410275.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:35.689Z,1516410275.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:04:35.690Z,1516410275.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:38.748Z,1516410278.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:38.766Z,1516410278.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2018-01-20T01:04:38.767Z,1516410278.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:38.844Z,1516410278.844 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20180119T210901/Express0097.lzma
2018-01-20T01:04:38.866Z,1516410278.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:38.910Z,1516410278.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:04:38.911Z,1516410278.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:39.252Z,1516410279.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:39.270Z,1516410279.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:04:39.271Z,1516410279.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:39.616Z,1516410279.616 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0097.lzma.bak
2018-01-20T01:04:39.616Z,1516410279.616 [DataOverHttps](INFO): SBD MOMSN=7725561
2018-01-20T01:04:39.667Z,1516410279.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:39.685Z,1516410279.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:04:39.686Z,1516410279.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:40.155Z,1516410280.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:40.169Z,1516410280.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-01-20T01:04:40.170Z,1516410280.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:40.173Z,1516410280.173 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T01:04:40.173Z,1516410280.173 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T01:04:40.173Z,1516410280.173 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T01:04:40.436Z,1516410280.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:40.466Z,1516410280.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:04:40.467Z,1516410280.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:43.664Z,1516410283.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:43.678Z,1516410283.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:04:43.679Z,1516410283.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:43.777Z,1516410283.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:43.793Z,1516410283.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-01-20T01:04:43.794Z,1516410283.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:44.146Z,1516410284.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:44.186Z,1516410284.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-01-20T01:04:44.187Z,1516410284.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:44.550Z,1516410284.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:44.574Z,1516410284.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-01-20T01:04:44.575Z,1516410284.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:44.949Z,1516410284.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:44.980Z,1516410284.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-01-20T01:04:44.981Z,1516410284.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:45.335Z,1516410285.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:45.349Z,1516410285.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-01-20T01:04:45.350Z,1516410285.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:45.736Z,1516410285.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:45.750Z,1516410285.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-01-20T01:04:45.751Z,1516410285.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:46.132Z,1516410286.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:46.150Z,1516410286.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-01-20T01:04:46.151Z,1516410286.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:46.550Z,1516410286.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:46.579Z,1516410286.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-01-20T01:04:46.580Z,1516410286.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:46.938Z,1516410286.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:46.951Z,1516410286.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-01-20T01:04:46.952Z,1516410286.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:47.359Z,1516410287.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:47.437Z,1516410287.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-01-20T01:04:47.438Z,1516410287.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:47.736Z,1516410287.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:47.750Z,1516410287.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-01-20T01:04:47.751Z,1516410287.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:48.133Z,1516410288.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:48.154Z,1516410288.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-01-20T01:04:48.155Z,1516410288.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:48.537Z,1516410288.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:48.551Z,1516410288.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-01-20T01:04:48.552Z,1516410288.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:48.939Z,1516410288.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:48.952Z,1516410288.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-01-20T01:04:48.954Z,1516410288.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:49.343Z,1516410289.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:49.427Z,1516410289.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-20T01:04:49.428Z,1516410289.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:49.743Z,1516410289.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:49.756Z,1516410289.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-01-20T01:04:49.758Z,1516410289.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:50.135Z,1516410290.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:50.149Z,1516410290.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-20T01:04:50.150Z,1516410290.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:50.530Z,1516410290.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:50.554Z,1516410290.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-20T01:04:50.555Z,1516410290.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:50.939Z,1516410290.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:50.954Z,1516410290.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-01-20T01:04:50.955Z,1516410290.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:51.345Z,1516410291.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:51.359Z,1516410291.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-01-20T01:04:51.360Z,1516410291.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:51.743Z,1516410291.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:51.756Z,1516410291.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-01-20T01:04:51.757Z,1516410291.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:52.145Z,1516410292.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:52.159Z,1516410292.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-01-20T01:04:52.160Z,1516410292.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:52.543Z,1516410292.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:52.562Z,1516410292.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-20T01:04:52.563Z,1516410292.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:52.928Z,1516410292.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:52.968Z,1516410292.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-20T01:04:52.969Z,1516410292.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:53.334Z,1516410293.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:53.354Z,1516410293.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-20T01:04:53.355Z,1516410293.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:53.740Z,1516410293.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:53.754Z,1516410293.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-20T01:04:53.755Z,1516410293.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:54.142Z,1516410294.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:54.155Z,1516410294.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-20T01:04:54.156Z,1516410294.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:54.539Z,1516410294.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:54.559Z,1516410294.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:54.945Z,1516410294.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:54.959Z,1516410294.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:55.346Z,1516410295.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:55.360Z,1516410295.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:55.745Z,1516410295.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:55.759Z,1516410295.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:56.139Z,1516410296.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:56.159Z,1516410296.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:56.541Z,1516410296.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:56.555Z,1516410296.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:56.941Z,1516410296.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:56.955Z,1516410296.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:57.340Z,1516410297.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:57.354Z,1516410297.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:57.747Z,1516410297.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:57.766Z,1516410297.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:58.145Z,1516410298.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:58.159Z,1516410298.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:58.547Z,1516410298.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:58.561Z,1516410298.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:58.943Z,1516410298.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:58.956Z,1516410298.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:59.335Z,1516410299.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:59.350Z,1516410299.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:04:59.732Z,1516410299.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:04:59.759Z,1516410299.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:00.144Z,1516410300.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:00.158Z,1516410300.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:00.542Z,1516410300.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:00.556Z,1516410300.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:00.950Z,1516410300.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:00.964Z,1516410300.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:01.350Z,1516410301.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:01.364Z,1516410301.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:01.749Z,1516410301.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:01.763Z,1516410301.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:02.142Z,1516410302.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:02.156Z,1516410302.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:02.543Z,1516410302.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:02.556Z,1516410302.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:02.928Z,1516410302.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:02.956Z,1516410302.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:03.327Z,1516410303.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:03.363Z,1516410303.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:03.754Z,1516410303.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:03.768Z,1516410303.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:04.151Z,1516410304.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:04.175Z,1516410304.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:04.551Z,1516410304.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:04.567Z,1516410304.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:04.923Z,1516410304.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:04.956Z,1516410304.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:05.326Z,1516410305.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:05.359Z,1516410305.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:05.728Z,1516410305.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:05.759Z,1516410305.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:06.133Z,1516410306.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:06.160Z,1516410306.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:06.532Z,1516410306.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:06.563Z,1516410306.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:06.942Z,1516410306.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:06.964Z,1516410306.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:07.356Z,1516410307.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:07.370Z,1516410307.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:07.739Z,1516410307.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:07.771Z,1516410307.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:08.127Z,1516410308.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:08.163Z,1516410308.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:08.527Z,1516410308.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:08.564Z,1516410308.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:08.933Z,1516410308.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:08.963Z,1516410308.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:09.327Z,1516410309.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:09.362Z,1516410309.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:09.738Z,1516410309.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:09.772Z,1516410309.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:10.139Z,1516410310.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:10.171Z,1516410310.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:10.550Z,1516410310.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:10.568Z,1516410310.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:10.927Z,1516410310.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:10.966Z,1516410310.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:11.325Z,1516410311.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:11.340Z,1516410311.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:11.732Z,1516410311.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:11.767Z,1516410311.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:12.136Z,1516410312.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:12.150Z,1516410312.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:12.528Z,1516410312.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:12.543Z,1516410312.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:12.946Z,1516410312.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:12.968Z,1516410312.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:13.346Z,1516410313.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:13.374Z,1516410313.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:13.743Z,1516410313.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:13.773Z,1516410313.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:14.135Z,1516410314.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:14.149Z,1516410314.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:14.535Z,1516410314.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:14.549Z,1516410314.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:14.937Z,1516410314.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:14.955Z,1516410314.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:15.337Z,1516410315.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:15.351Z,1516410315.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:15.738Z,1516410315.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:15.758Z,1516410315.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:16.139Z,1516410316.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:16.153Z,1516410316.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:16.550Z,1516410316.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:16.564Z,1516410316.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:16.940Z,1516410316.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:16.954Z,1516410316.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:17.334Z,1516410317.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:17.348Z,1516410317.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:17.735Z,1516410317.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:17.753Z,1516410317.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:18.140Z,1516410318.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:18.154Z,1516410318.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:18.540Z,1516410318.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:18.554Z,1516410318.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:18.940Z,1516410318.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:18.959Z,1516410318.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:19.346Z,1516410319.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:19.360Z,1516410319.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:19.743Z,1516410319.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:19.757Z,1516410319.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:20.139Z,1516410320.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:20.154Z,1516410320.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:20.540Z,1516410320.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:20.554Z,1516410320.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:20.940Z,1516410320.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:20.985Z,1516410320.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:21.340Z,1516410321.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:21.354Z,1516410321.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:21.743Z,1516410321.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:21.757Z,1516410321.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:22.147Z,1516410322.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:22.167Z,1516410322.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:22.545Z,1516410322.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:22.567Z,1516410322.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:22.941Z,1516410322.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:22.955Z,1516410322.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:23.334Z,1516410323.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:23.348Z,1516410323.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:23.733Z,1516410323.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:23.755Z,1516410323.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:24.142Z,1516410324.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:24.156Z,1516410324.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:24.533Z,1516410324.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:24.547Z,1516410324.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:24.946Z,1516410324.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:24.967Z,1516410324.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:25.346Z,1516410325.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:25.360Z,1516410325.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:25.746Z,1516410325.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:25.760Z,1516410325.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:26.139Z,1516410326.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:26.153Z,1516410326.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:26.531Z,1516410326.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:26.555Z,1516410326.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:26.965Z,1516410326.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:26.999Z,1516410326.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:27.334Z,1516410327.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:27.355Z,1516410327.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:27.745Z,1516410327.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:27.759Z,1516410327.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:28.146Z,1516410328.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:28.167Z,1516410328.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:28.545Z,1516410328.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:28.559Z,1516410328.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:28.941Z,1516410328.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:28.954Z,1516410328.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:29.334Z,1516410329.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:29.348Z,1516410329.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:29.734Z,1516410329.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:29.754Z,1516410329.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:30.142Z,1516410330.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:30.155Z,1516410330.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:30.525Z,1516410330.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:30.552Z,1516410330.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:30.950Z,1516410330.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:30.964Z,1516410330.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:31.350Z,1516410331.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:31.364Z,1516410331.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:31.750Z,1516410331.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:31.764Z,1516410331.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:32.140Z,1516410332.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:32.159Z,1516410332.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:32.537Z,1516410332.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:32.551Z,1516410332.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:32.928Z,1516410332.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:32.959Z,1516410332.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:33.326Z,1516410333.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:33.359Z,1516410333.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:33.752Z,1516410333.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:33.766Z,1516410333.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:34.154Z,1516410334.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:34.168Z,1516410334.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:34.547Z,1516410334.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:34.561Z,1516410334.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:34.927Z,1516410334.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:34.959Z,1516410334.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:35.325Z,1516410335.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:35.355Z,1516410335.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:35.732Z,1516410335.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:35.757Z,1516410335.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:36.124Z,1516410336.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:36.155Z,1516410336.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:36.523Z,1516410336.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:36.555Z,1516410336.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:36.948Z,1516410336.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:36.962Z,1516410336.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:37.352Z,1516410337.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:37.366Z,1516410337.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:37.753Z,1516410337.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:37.767Z,1516410337.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:38.128Z,1516410338.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:38.163Z,1516410338.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:38.525Z,1516410338.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:38.560Z,1516410338.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:38.934Z,1516410338.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:38.971Z,1516410338.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:39.333Z,1516410339.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:39.362Z,1516410339.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:39.738Z,1516410339.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:39.771Z,1516410339.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:40.140Z,1516410340.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:40.176Z,1516410340.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:40.553Z,1516410340.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:40.568Z,1516410340.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:40.928Z,1516410340.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:40.966Z,1516410340.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:44.048Z,1516410344.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:44.071Z,1516410344.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:44.168Z,1516410344.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:44.214Z,1516410344.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:44.539Z,1516410344.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:44.567Z,1516410344.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:44.950Z,1516410344.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:44.963Z,1516410344.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:45.327Z,1516410345.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:45.357Z,1516410345.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:45.727Z,1516410345.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:45.761Z,1516410345.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:46.128Z,1516410346.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:46.165Z,1516410346.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:46.520Z,1516410346.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:46.535Z,1516410346.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:46.939Z,1516410346.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:46.971Z,1516410346.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:47.342Z,1516410347.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:47.367Z,1516410347.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:47.726Z,1516410347.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:47.765Z,1516410347.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:48.123Z,1516410348.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:48.143Z,1516410348.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:48.527Z,1516410348.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:48.542Z,1516410348.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:48.929Z,1516410348.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:48.944Z,1516410348.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:49.328Z,1516410349.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:49.343Z,1516410349.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:49.739Z,1516410349.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:49.770Z,1516410349.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:50.139Z,1516410350.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:50.167Z,1516410350.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:50.543Z,1516410350.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:50.564Z,1516410350.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:50.927Z,1516410350.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:50.945Z,1516410350.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:51.316Z,1516410351.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:51.347Z,1516410351.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:51.727Z,1516410351.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:51.747Z,1516410351.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:52.132Z,1516410352.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:52.146Z,1516410352.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:52.532Z,1516410352.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:52.546Z,1516410352.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:52.935Z,1516410352.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:52.949Z,1516410352.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:53.338Z,1516410353.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:53.352Z,1516410353.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:53.735Z,1516410353.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:53.749Z,1516410353.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:54.127Z,1516410354.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:54.147Z,1516410354.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:54.532Z,1516410354.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:54.546Z,1516410354.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:54.932Z,1516410354.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:54.946Z,1516410354.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:55.327Z,1516410355.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:55.347Z,1516410355.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:55.734Z,1516410355.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:55.748Z,1516410355.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:56.139Z,1516410356.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:56.153Z,1516410356.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:56.533Z,1516410356.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:56.547Z,1516410356.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:56.928Z,1516410356.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:56.951Z,1516410356.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:57.317Z,1516410357.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:57.338Z,1516410357.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:57.727Z,1516410357.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:57.741Z,1516410357.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:58.128Z,1516410358.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:58.143Z,1516410358.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:58.517Z,1516410358.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:58.544Z,1516410358.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:58.937Z,1516410358.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:58.951Z,1516410358.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:59.338Z,1516410359.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:59.352Z,1516410359.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:05:59.737Z,1516410359.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:05:59.751Z,1516410359.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:00.131Z,1516410360.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:00.151Z,1516410360.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:00.532Z,1516410360.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:00.546Z,1516410360.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:00.933Z,1516410360.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:00.947Z,1516410360.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:01.331Z,1516410361.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:01.351Z,1516410361.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:01.738Z,1516410361.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:01.752Z,1516410361.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:02.139Z,1516410362.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:02.153Z,1516410362.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:02.537Z,1516410362.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:02.551Z,1516410362.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:02.928Z,1516410362.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:02.943Z,1516410362.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:03.325Z,1516410363.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:03.343Z,1516410363.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:03.722Z,1516410363.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:03.748Z,1516410363.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:04.124Z,1516410364.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:04.151Z,1516410364.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:04.523Z,1516410364.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:04.549Z,1516410364.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:04.939Z,1516410364.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:04.953Z,1516410364.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:05.343Z,1516410365.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:05.357Z,1516410365.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:05.739Z,1516410365.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:05.753Z,1516410365.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:06.119Z,1516410366.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:06.145Z,1516410366.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:06.519Z,1516410366.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:06.547Z,1516410366.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:06.924Z,1516410366.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:06.950Z,1516410366.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:07.319Z,1516410367.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:07.345Z,1516410367.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:07.740Z,1516410367.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:07.754Z,1516410367.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:08.139Z,1516410368.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:08.153Z,1516410368.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:08.535Z,1516410368.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:08.556Z,1516410368.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:08.920Z,1516410368.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:08.947Z,1516410368.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:09.317Z,1516410369.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:09.347Z,1516410369.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:09.743Z,1516410369.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:09.757Z,1516410369.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:10.143Z,1516410370.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:10.157Z,1516410370.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:10.543Z,1516410370.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:10.557Z,1516410370.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:10.920Z,1516410370.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:10.950Z,1516410370.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:11.319Z,1516410371.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:11.357Z,1516410371.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:11.731Z,1516410371.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:11.756Z,1516410371.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:12.141Z,1516410372.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:12.162Z,1516410372.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:12.544Z,1516410372.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:12.558Z,1516410372.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:12.924Z,1516410372.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:12.954Z,1516410372.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:13.319Z,1516410373.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:13.351Z,1516410373.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:13.734Z,1516410373.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:13.761Z,1516410373.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:14.126Z,1516410374.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:14.164Z,1516410374.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:14.531Z,1516410374.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:14.565Z,1516410374.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:14.924Z,1516410374.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:14.962Z,1516410374.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:15.322Z,1516410375.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:15.337Z,1516410375.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:15.739Z,1516410375.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:15.762Z,1516410375.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:16.138Z,1516410376.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:16.163Z,1516410376.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:16.543Z,1516410376.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:16.567Z,1516410376.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:16.926Z,1516410376.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:16.940Z,1516410376.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:17.329Z,1516410377.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:17.343Z,1516410377.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:17.734Z,1516410377.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:17.770Z,1516410377.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:18.143Z,1516410378.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:18.167Z,1516410378.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:18.540Z,1516410378.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:18.570Z,1516410378.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:18.929Z,1516410378.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:18.945Z,1516410378.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:19.324Z,1516410379.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:19.351Z,1516410379.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:19.743Z,1516410379.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:19.780Z,1516410379.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:20.131Z,1516410380.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:20.146Z,1516410380.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:20.544Z,1516410380.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:20.574Z,1516410380.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:20.933Z,1516410380.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:20.975Z,1516410380.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:21.325Z,1516410381.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:21.340Z,1516410381.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:21.738Z,1516410381.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:21.752Z,1516410381.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:22.138Z,1516410382.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:22.159Z,1516410382.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:22.539Z,1516410382.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:22.553Z,1516410382.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:22.933Z,1516410382.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:22.955Z,1516410382.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:23.333Z,1516410383.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:23.347Z,1516410383.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:23.738Z,1516410383.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:23.759Z,1516410383.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:24.142Z,1516410384.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:24.156Z,1516410384.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:24.540Z,1516410384.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:24.554Z,1516410384.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:24.933Z,1516410384.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:24.947Z,1516410384.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:25.322Z,1516410385.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:25.346Z,1516410385.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:25.740Z,1516410385.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:25.754Z,1516410385.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:26.142Z,1516410386.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:26.156Z,1516410386.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:26.541Z,1516410386.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:26.563Z,1516410386.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:26.933Z,1516410386.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:26.947Z,1516410386.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:27.321Z,1516410387.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:27.348Z,1516410387.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:27.742Z,1516410387.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:27.763Z,1516410387.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:28.145Z,1516410388.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:28.159Z,1516410388.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:28.531Z,1516410388.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:28.552Z,1516410388.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:28.920Z,1516410388.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:28.951Z,1516410388.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:29.333Z,1516410389.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:29.346Z,1516410389.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:29.739Z,1516410389.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:29.753Z,1516410389.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:30.142Z,1516410390.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:30.156Z,1516410390.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:30.544Z,1516410390.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:30.557Z,1516410390.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:30.932Z,1516410390.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:30.947Z,1516410390.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:31.319Z,1516410391.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:31.351Z,1516410391.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:31.739Z,1516410391.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:31.753Z,1516410391.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:32.145Z,1516410392.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:32.159Z,1516410392.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:32.542Z,1516410392.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:32.556Z,1516410392.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:32.934Z,1516410392.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:32.947Z,1516410392.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:33.317Z,1516410393.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:33.344Z,1516410393.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:33.743Z,1516410393.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:33.757Z,1516410393.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:34.147Z,1516410394.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:34.161Z,1516410394.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:34.543Z,1516410394.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:34.557Z,1516410394.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:34.924Z,1516410394.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:34.950Z,1516410394.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:35.319Z,1516410395.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:35.346Z,1516410395.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:35.743Z,1516410395.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:35.757Z,1516410395.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:36.143Z,1516410396.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:36.157Z,1516410396.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:36.544Z,1516410396.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:36.562Z,1516410396.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:36.914Z,1516410396.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:36.947Z,1516410396.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:37.323Z,1516410397.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:37.349Z,1516410397.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:37.740Z,1516410397.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:37.754Z,1516410397.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:38.126Z,1516410398.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:38.162Z,1516410398.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:38.538Z,1516410398.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:38.556Z,1516410398.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:38.920Z,1516410398.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:38.952Z,1516410398.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:39.317Z,1516410399.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:39.339Z,1516410399.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:39.730Z,1516410399.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:39.756Z,1516410399.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:40.144Z,1516410400.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:40.162Z,1516410400.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:40.543Z,1516410400.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:40.557Z,1516410400.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:40.920Z,1516410400.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:40.951Z,1516410400.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:41.324Z,1516410401.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:41.355Z,1516410401.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:44.482Z,1516410404.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:44.510Z,1516410404.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:44.626Z,1516410404.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:44.663Z,1516410404.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:44.982Z,1516410404.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:45.011Z,1516410405.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:45.373Z,1516410405.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:45.388Z,1516410405.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:45.771Z,1516410405.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:45.786Z,1516410405.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:46.178Z,1516410406.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:46.192Z,1516410406.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:46.568Z,1516410406.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:46.587Z,1516410406.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:46.978Z,1516410406.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:46.993Z,1516410406.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:47.382Z,1516410407.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:47.403Z,1516410407.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:47.782Z,1516410407.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:47.803Z,1516410407.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:48.171Z,1516410408.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:48.186Z,1516410408.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:48.577Z,1516410408.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:48.599Z,1516410408.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:48.972Z,1516410408.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:48.987Z,1516410408.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:49.368Z,1516410409.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:49.382Z,1516410409.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:49.782Z,1516410409.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:49.797Z,1516410409.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:50.181Z,1516410410.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:50.195Z,1516410410.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:50.581Z,1516410410.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:50.595Z,1516410410.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:50.983Z,1516410410.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:50.997Z,1516410410.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:51.368Z,1516410411.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:51.387Z,1516410411.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:51.779Z,1516410411.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:51.793Z,1516410411.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:52.182Z,1516410412.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:52.203Z,1516410412.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:52.582Z,1516410412.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:52.603Z,1516410412.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:52.972Z,1516410412.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:52.986Z,1516410412.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:53.372Z,1516410413.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:53.391Z,1516410413.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:53.781Z,1516410413.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:53.803Z,1516410413.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:54.181Z,1516410414.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:54.195Z,1516410414.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:54.582Z,1516410414.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:54.603Z,1516410414.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:54.972Z,1516410414.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:54.987Z,1516410414.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:55.367Z,1516410415.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:55.382Z,1516410415.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:55.782Z,1516410415.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:55.803Z,1516410415.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:56.182Z,1516410416.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:56.203Z,1516410416.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:56.582Z,1516410416.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:56.597Z,1516410416.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:56.979Z,1516410416.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:56.993Z,1516410416.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:57.368Z,1516410417.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:57.387Z,1516410417.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:57.779Z,1516410417.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:57.799Z,1516410417.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:58.183Z,1516410418.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:58.203Z,1516410418.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:58.582Z,1516410418.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:58.603Z,1516410418.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:58.970Z,1516410418.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:58.985Z,1516410418.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:59.374Z,1516410419.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:59.388Z,1516410419.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:06:59.782Z,1516410419.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:06:59.803Z,1516410419.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:00.183Z,1516410420.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:00.197Z,1516410420.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:00.583Z,1516410420.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:00.603Z,1516410420.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:00.972Z,1516410420.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:00.987Z,1516410420.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:01.369Z,1516410421.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:01.384Z,1516410421.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:01.783Z,1516410421.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:01.803Z,1516410421.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:02.183Z,1516410422.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:02.197Z,1516410422.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:02.580Z,1516410422.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:02.595Z,1516410422.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:02.982Z,1516410422.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:02.997Z,1516410422.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:03.368Z,1516410423.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:03.383Z,1516410423.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:03.774Z,1516410423.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:03.791Z,1516410423.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:04.183Z,1516410424.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:04.203Z,1516410424.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:04.583Z,1516410424.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:04.602Z,1516410424.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:04.973Z,1516410424.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:04.988Z,1516410424.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:05.368Z,1516410425.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:05.383Z,1516410425.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:05.779Z,1516410425.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:05.802Z,1516410425.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:06.182Z,1516410426.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:06.196Z,1516410426.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:06.587Z,1516410426.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:06.607Z,1516410426.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:06.972Z,1516410426.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:06.988Z,1516410426.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:07.359Z,1516410427.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:07.391Z,1516410427.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:07.783Z,1516410427.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:07.797Z,1516410427.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:08.185Z,1516410428.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:08.200Z,1516410428.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:08.576Z,1516410428.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:08.603Z,1516410428.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:08.968Z,1516410428.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:08.994Z,1516410428.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:09.363Z,1516410429.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:09.390Z,1516410429.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:09.779Z,1516410429.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:09.793Z,1516410429.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:10.191Z,1516410430.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:10.210Z,1516410430.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:10.578Z,1516410430.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:10.593Z,1516410430.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:10.959Z,1516410430.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:10.994Z,1516410430.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:11.364Z,1516410431.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:11.390Z,1516410431.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:11.757Z,1516410431.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:11.791Z,1516410431.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:12.179Z,1516410432.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:12.193Z,1516410432.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:12.591Z,1516410432.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:12.610Z,1516410432.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:12.983Z,1516410432.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:13.003Z,1516410433.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:13.360Z,1516410433.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:13.386Z,1516410433.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:13.759Z,1516410433.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:13.795Z,1516410433.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:14.164Z,1516410434.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:14.196Z,1516410434.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:14.559Z,1516410434.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:14.586Z,1516410434.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:14.974Z,1516410434.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:15.000Z,1516410435.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:15.387Z,1516410435.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:15.401Z,1516410435.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:15.770Z,1516410435.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:15.795Z,1516410435.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:16.167Z,1516410436.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:16.199Z,1516410436.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:16.563Z,1516410436.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:16.599Z,1516410436.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:16.960Z,1516410436.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:16.995Z,1516410436.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:17.368Z,1516410437.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:17.405Z,1516410437.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:17.760Z,1516410437.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:17.779Z,1516410437.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:18.174Z,1516410438.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:18.204Z,1516410438.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:18.574Z,1516410438.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:18.609Z,1516410438.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:18.974Z,1516410438.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:18.988Z,1516410438.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:19.368Z,1516410439.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:19.383Z,1516410439.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:19.768Z,1516410439.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:19.782Z,1516410439.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:20.166Z,1516410440.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:20.180Z,1516410440.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:20.564Z,1516410440.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:20.579Z,1516410440.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:20.982Z,1516410440.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:21.011Z,1516410441.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:21.374Z,1516410441.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:21.388Z,1516410441.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:21.782Z,1516410441.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:21.812Z,1516410441.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:22.169Z,1516410442.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:22.182Z,1516410442.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:22.568Z,1516410442.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:22.587Z,1516410442.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:22.968Z,1516410442.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:22.987Z,1516410442.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:23.370Z,1516410443.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:23.384Z,1516410443.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:23.769Z,1516410443.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:23.783Z,1516410443.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:24.170Z,1516410444.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:24.184Z,1516410444.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:24.574Z,1516410444.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:24.587Z,1516410444.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:24.974Z,1516410444.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:24.988Z,1516410444.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:25.368Z,1516410445.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:25.383Z,1516410445.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:25.769Z,1516410445.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:25.786Z,1516410445.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:26.170Z,1516410446.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:26.185Z,1516410446.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:26.566Z,1516410446.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:26.580Z,1516410446.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:26.974Z,1516410446.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:26.988Z,1516410446.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:27.381Z,1516410447.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:27.395Z,1516410447.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:27.774Z,1516410447.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:27.788Z,1516410447.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:28.172Z,1516410448.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:28.186Z,1516410448.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:28.572Z,1516410448.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:28.586Z,1516410448.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:28.968Z,1516410448.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:28.982Z,1516410448.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:29.369Z,1516410449.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:29.383Z,1516410449.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:29.772Z,1516410449.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:29.786Z,1516410449.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:30.173Z,1516410450.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:30.188Z,1516410450.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:30.578Z,1516410450.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:30.599Z,1516410450.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:30.978Z,1516410450.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:30.992Z,1516410450.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:31.370Z,1516410451.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:31.385Z,1516410451.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:31.768Z,1516410451.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:31.782Z,1516410451.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:32.170Z,1516410452.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:32.184Z,1516410452.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:32.568Z,1516410452.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:32.582Z,1516410452.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:32.974Z,1516410452.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:32.988Z,1516410452.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:33.374Z,1516410453.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:33.388Z,1516410453.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:33.774Z,1516410453.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:33.795Z,1516410453.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:34.171Z,1516410454.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:34.185Z,1516410454.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:34.570Z,1516410454.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:34.584Z,1516410454.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:34.968Z,1516410454.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:34.983Z,1516410454.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:35.374Z,1516410455.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:35.388Z,1516410455.388 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:35.388Z,1516410455.388 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2018-01-20T01:07:35.388Z,1516410455.388 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:07:35.390Z,1516410455.390 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:35.390Z,1516410455.390 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2018-01-20T01:07:35.390Z,1516410455.390 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:07:35.392Z,1516410455.392 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:35.392Z,1516410455.392 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 79
2018-01-20T01:07:35.392Z,1516410455.392 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:07:35.429Z,1516410455.429 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:07:35.430Z,1516410455.430 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:07:35.430Z,1516410455.430 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:07:35.776Z,1516410455.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:35.805Z,1516410455.805 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:07:35.805Z,1516410455.805 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2018-01-20T01:07:35.806Z,1516410455.806 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:07:35.806Z,1516410455.806 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2018-01-20T01:07:35.806Z,1516410455.806 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:07:35.806Z,1516410455.806 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 79
2018-01-20T01:07:36.173Z,1516410456.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:36.191Z,1516410456.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:07:36.191Z,1516410456.191 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:07:36.191Z,1516410456.191 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:07:36.192Z,1516410456.192 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:07:36.192Z,1516410456.192 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:07:36.192Z,1516410456.192 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:07:36.193Z,1516410456.193 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:07:36.193Z,1516410456.193 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:07:36.194Z,1516410456.194 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:07:36.583Z,1516410456.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:36.598Z,1516410456.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:07:36.599Z,1516410456.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:36.977Z,1516410456.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:37.005Z,1516410457.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:07:37.006Z,1516410457.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:37.363Z,1516410457.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:37.389Z,1516410457.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:07:37.390Z,1516410457.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:37.779Z,1516410457.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:37.798Z,1516410457.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:07:37.799Z,1516410457.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:38.168Z,1516410458.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:38.195Z,1516410458.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:07:38.196Z,1516410458.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:38.567Z,1516410458.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:38.593Z,1516410458.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:07:38.594Z,1516410458.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:38.985Z,1516410458.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:38.999Z,1516410458.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:07:38.999Z,1516410458.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:39.370Z,1516410459.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:39.392Z,1516410459.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:07:39.397Z,1516410459.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:39.786Z,1516410459.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:39.799Z,1516410459.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:07:39.800Z,1516410459.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:40.169Z,1516410460.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:40.198Z,1516410460.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:07:40.199Z,1516410460.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:40.563Z,1516410460.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:40.576Z,1516410460.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:07:40.594Z,1516410460.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:40.968Z,1516410460.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:40.998Z,1516410460.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:07:40.999Z,1516410460.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:41.370Z,1516410461.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:41.384Z,1516410461.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:07:41.384Z,1516410461.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:44.503Z,1516410464.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:44.517Z,1516410464.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-01-20T01:07:44.518Z,1516410464.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:44.650Z,1516410464.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:44.682Z,1516410464.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-01-20T01:07:44.683Z,1516410464.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:45.011Z,1516410465.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:45.030Z,1516410465.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:07:45.031Z,1516410465.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:45.412Z,1516410465.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:45.426Z,1516410465.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:07:45.427Z,1516410465.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:45.796Z,1516410465.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:45.811Z,1516410465.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:07:45.812Z,1516410465.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:46.193Z,1516410466.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:46.207Z,1516410466.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:07:46.208Z,1516410466.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:46.580Z,1516410466.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:46.611Z,1516410466.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:07:46.612Z,1516410466.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:46.994Z,1516410466.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:47.016Z,1516410467.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:07:47.017Z,1516410467.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:47.407Z,1516410467.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:47.421Z,1516410467.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:07:47.422Z,1516410467.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:47.798Z,1516410467.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:47.817Z,1516410467.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:07:47.818Z,1516410467.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:48.179Z,1516410468.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:48.211Z,1516410468.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:07:48.211Z,1516410468.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:48.583Z,1516410468.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:48.609Z,1516410468.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:07:48.610Z,1516410468.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:48.979Z,1516410468.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:49.016Z,1516410469.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:07:49.017Z,1516410469.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:49.388Z,1516410469.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:49.414Z,1516410469.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:07:49.415Z,1516410469.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:49.783Z,1516410469.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:49.808Z,1516410469.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:07:49.809Z,1516410469.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:50.201Z,1516410470.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:50.224Z,1516410470.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:07:50.225Z,1516410470.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:50.610Z,1516410470.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:50.624Z,1516410470.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:07:50.625Z,1516410470.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:51.002Z,1516410471.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:51.016Z,1516410471.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:07:51.017Z,1516410471.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:51.379Z,1516410471.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:51.411Z,1516410471.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:07:51.412Z,1516410471.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:51.787Z,1516410471.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:51.812Z,1516410471.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:07:51.813Z,1516410471.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:52.184Z,1516410472.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:52.208Z,1516410472.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:07:52.210Z,1516410472.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:52.587Z,1516410472.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:52.600Z,1516410472.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:07:52.601Z,1516410472.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:52.995Z,1516410472.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:53.016Z,1516410473.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:07:53.021Z,1516410473.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:53.398Z,1516410473.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:53.412Z,1516410473.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:07:53.413Z,1516410473.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:53.805Z,1516410473.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:53.818Z,1516410473.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:07:53.819Z,1516410473.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:54.193Z,1516410474.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:54.207Z,1516410474.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:07:54.208Z,1516410474.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:54.589Z,1516410474.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:54.611Z,1516410474.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:07:54.612Z,1516410474.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:54.992Z,1516410474.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:55.006Z,1516410475.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:07:55.007Z,1516410475.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:55.394Z,1516410475.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:55.408Z,1516410475.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:55.789Z,1516410475.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:55.807Z,1516410475.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:56.202Z,1516410476.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:56.216Z,1516410476.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:56.602Z,1516410476.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:56.616Z,1516410476.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:57.001Z,1516410477.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:57.023Z,1516410477.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:57.396Z,1516410477.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:57.410Z,1516410477.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:57.795Z,1516410477.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:57.815Z,1516410477.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:58.195Z,1516410478.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:58.210Z,1516410478.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:58.588Z,1516410478.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:58.602Z,1516410478.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:59.001Z,1516410479.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:59.015Z,1516410479.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:59.401Z,1516410479.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:59.415Z,1516410479.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:07:59.802Z,1516410479.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:07:59.816Z,1516410479.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:00.196Z,1516410480.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:00.210Z,1516410480.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:00.591Z,1516410480.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:00.605Z,1516410480.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:00.989Z,1516410480.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:01.003Z,1516410481.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:01.395Z,1516410481.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:01.415Z,1516410481.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:01.801Z,1516410481.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:01.815Z,1516410481.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:02.201Z,1516410482.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:02.215Z,1516410482.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:02.601Z,1516410482.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:02.615Z,1516410482.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:02.990Z,1516410482.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:03.008Z,1516410483.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:03.388Z,1516410483.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:03.402Z,1516410483.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:03.789Z,1516410483.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:03.817Z,1516410483.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:04.190Z,1516410484.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:04.217Z,1516410484.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:04.595Z,1516410484.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:04.610Z,1516410484.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:05.005Z,1516410485.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:05.019Z,1516410485.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:05.404Z,1516410485.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:05.423Z,1516410485.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:05.806Z,1516410485.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:05.819Z,1516410485.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:06.195Z,1516410486.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:06.215Z,1516410486.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:06.586Z,1516410486.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:06.608Z,1516410486.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:06.980Z,1516410486.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:07.011Z,1516410487.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:07.395Z,1516410487.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:07.415Z,1516410487.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:07.801Z,1516410487.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:07.816Z,1516410487.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:08.202Z,1516410488.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:08.216Z,1516410488.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:08.605Z,1516410488.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:08.619Z,1516410488.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:08.990Z,1516410488.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:09.010Z,1516410489.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:09.379Z,1516410489.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:09.414Z,1516410489.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:09.795Z,1516410489.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:09.815Z,1516410489.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:10.190Z,1516410490.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:10.209Z,1516410490.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:10.579Z,1516410490.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:10.605Z,1516410490.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:11.002Z,1516410491.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:11.016Z,1516410491.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:11.404Z,1516410491.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:11.423Z,1516410491.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:11.806Z,1516410491.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:11.819Z,1516410491.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:12.194Z,1516410492.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:12.215Z,1516410492.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:12.595Z,1516410492.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:12.615Z,1516410492.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:12.980Z,1516410492.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:13.011Z,1516410493.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:13.395Z,1516410493.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:13.415Z,1516410493.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:13.801Z,1516410493.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:13.816Z,1516410493.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:14.205Z,1516410494.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:14.219Z,1516410494.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:14.602Z,1516410494.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:14.616Z,1516410494.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:14.986Z,1516410494.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:15.008Z,1516410495.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:15.379Z,1516410495.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:15.405Z,1516410495.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:15.795Z,1516410495.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:15.815Z,1516410495.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:16.190Z,1516410496.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:16.217Z,1516410496.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:16.596Z,1516410496.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:16.610Z,1516410496.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:17.006Z,1516410497.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:17.027Z,1516410497.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:17.407Z,1516410497.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:17.427Z,1516410497.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:17.806Z,1516410497.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:17.820Z,1516410497.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:18.194Z,1516410498.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:18.212Z,1516410498.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:18.584Z,1516410498.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:18.615Z,1516410498.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:18.988Z,1516410498.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:19.014Z,1516410499.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:19.387Z,1516410499.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:19.413Z,1516410499.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:19.803Z,1516410499.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:19.817Z,1516410499.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:20.204Z,1516410500.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:20.230Z,1516410500.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:20.611Z,1516410500.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:20.625Z,1516410500.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:20.991Z,1516410500.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:21.017Z,1516410501.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:21.385Z,1516410501.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:21.423Z,1516410501.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:21.778Z,1516410501.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:21.819Z,1516410501.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:22.190Z,1516410502.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:22.224Z,1516410502.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:22.588Z,1516410502.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:22.603Z,1516410502.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:22.991Z,1516410502.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:23.030Z,1516410503.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:23.414Z,1516410503.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:23.433Z,1516410503.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:23.804Z,1516410503.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:23.834Z,1516410503.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:24.188Z,1516410504.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:24.227Z,1516410504.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:24.591Z,1516410504.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:24.633Z,1516410504.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:24.989Z,1516410504.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:25.003Z,1516410505.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:25.382Z,1516410505.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:25.396Z,1516410505.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:25.802Z,1516410505.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:25.831Z,1516410505.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:26.206Z,1516410506.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:26.232Z,1516410506.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:26.599Z,1516410506.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:26.633Z,1516410506.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:26.991Z,1516410506.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:27.011Z,1516410507.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:27.393Z,1516410507.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:27.407Z,1516410507.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:27.780Z,1516410507.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:27.807Z,1516410507.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:28.191Z,1516410508.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:28.211Z,1516410508.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:28.593Z,1516410508.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:28.606Z,1516410508.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:28.994Z,1516410508.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:29.008Z,1516410509.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:29.406Z,1516410509.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:29.436Z,1516410509.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:29.805Z,1516410509.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:29.819Z,1516410509.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:30.193Z,1516410510.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:30.207Z,1516410510.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:30.587Z,1516410510.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:30.613Z,1516410510.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:30.995Z,1516410510.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:31.008Z,1516410511.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:31.389Z,1516410511.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:31.403Z,1516410511.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:31.810Z,1516410511.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:31.840Z,1516410511.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:32.197Z,1516410512.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:32.211Z,1516410512.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:32.598Z,1516410512.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:32.612Z,1516410512.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:32.991Z,1516410512.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:33.005Z,1516410513.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:33.395Z,1516410513.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:33.409Z,1516410513.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:33.795Z,1516410513.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:33.810Z,1516410513.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:34.192Z,1516410514.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:34.206Z,1516410514.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:34.592Z,1516410514.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:34.606Z,1516410514.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:34.997Z,1516410514.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:35.011Z,1516410515.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:35.402Z,1516410515.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:35.416Z,1516410515.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:35.798Z,1516410515.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:35.818Z,1516410515.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:36.181Z,1516410516.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:36.202Z,1516410516.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:36.594Z,1516410516.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:36.608Z,1516410516.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:36.993Z,1516410516.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:37.007Z,1516410517.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:37.388Z,1516410517.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:37.406Z,1516410517.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:37.797Z,1516410517.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:37.811Z,1516410517.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:38.199Z,1516410518.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:38.213Z,1516410518.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:38.598Z,1516410518.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:38.612Z,1516410518.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:38.995Z,1516410518.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:39.010Z,1516410519.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:39.396Z,1516410519.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:39.410Z,1516410519.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:39.798Z,1516410519.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:39.812Z,1516410519.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:40.197Z,1516410520.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:40.211Z,1516410520.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:40.596Z,1516410520.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:40.610Z,1516410520.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:40.997Z,1516410520.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:41.019Z,1516410521.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:41.402Z,1516410521.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:41.416Z,1516410521.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:44.518Z,1516410524.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:44.546Z,1516410524.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:44.647Z,1516410524.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:44.667Z,1516410524.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:44.999Z,1516410524.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:45.019Z,1516410525.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:45.404Z,1516410525.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:45.423Z,1516410525.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:45.798Z,1516410525.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:45.812Z,1516410525.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:46.218Z,1516410526.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:46.240Z,1516410526.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:46.602Z,1516410526.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:46.622Z,1516410526.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:46.995Z,1516410526.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:47.012Z,1516410527.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:47.396Z,1516410527.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:47.415Z,1516410527.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:47.803Z,1516410527.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:47.817Z,1516410527.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:48.202Z,1516410528.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:48.223Z,1516410528.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:48.601Z,1516410528.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:48.615Z,1516410528.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:49.002Z,1516410529.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:49.016Z,1516410529.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:49.403Z,1516410529.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:49.423Z,1516410529.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:49.803Z,1516410529.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:49.817Z,1516410529.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:50.200Z,1516410530.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:50.214Z,1516410530.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:50.601Z,1516410530.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:50.615Z,1516410530.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:51.004Z,1516410531.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:51.018Z,1516410531.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:51.404Z,1516410531.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:51.418Z,1516410531.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:51.801Z,1516410531.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:51.815Z,1516410531.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:52.214Z,1516410532.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:52.246Z,1516410532.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:52.614Z,1516410532.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:52.628Z,1516410532.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:52.996Z,1516410532.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:53.019Z,1516410533.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:53.402Z,1516410533.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:53.416Z,1516410533.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:53.801Z,1516410533.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:53.814Z,1516410533.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:54.204Z,1516410534.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:54.218Z,1516410534.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:54.598Z,1516410534.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:54.616Z,1516410534.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:55.010Z,1516410535.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:55.024Z,1516410535.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:55.409Z,1516410535.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:55.423Z,1516410535.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:55.811Z,1516410535.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:55.831Z,1516410535.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:56.207Z,1516410536.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:56.221Z,1516410536.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:56.607Z,1516410536.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:56.621Z,1516410536.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:57.004Z,1516410537.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:57.019Z,1516410537.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:57.407Z,1516410537.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:57.420Z,1516410537.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:57.812Z,1516410537.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:57.827Z,1516410537.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:58.210Z,1516410538.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:58.224Z,1516410538.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:58.610Z,1516410538.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:58.623Z,1516410538.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:59.012Z,1516410539.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:59.027Z,1516410539.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:59.408Z,1516410539.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:59.422Z,1516410539.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:08:59.808Z,1516410539.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:08:59.822Z,1516410539.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:00.208Z,1516410540.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:00.223Z,1516410540.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:00.606Z,1516410540.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:00.622Z,1516410540.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:01.014Z,1516410541.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:01.028Z,1516410541.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:01.413Z,1516410541.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:01.427Z,1516410541.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:01.810Z,1516410541.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:01.824Z,1516410541.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:02.201Z,1516410542.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:02.231Z,1516410542.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:02.607Z,1516410542.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:02.615Z,1516410542.615 [PNI_TCM](ERROR): CRC does not match. Expected:0x58460 got:0x16662
2018-01-20T01:09:02.653Z,1516410542.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:03.008Z,1516410543.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:03.023Z,1516410543.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:03.405Z,1516410543.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:03.426Z,1516410543.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:03.811Z,1516410543.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:03.828Z,1516410543.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:04.213Z,1516410544.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:04.227Z,1516410544.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:04.614Z,1516410544.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:04.628Z,1516410544.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:04.990Z,1516410544.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:05.021Z,1516410545.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:05.403Z,1516410545.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:05.452Z,1516410545.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:05.806Z,1516410545.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:05.815Z,1516410545.815 [PNI_TCM](ERROR): CRC does not match. Expected:0x13326 got:0x1640
2018-01-20T01:09:05.835Z,1516410545.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:06.208Z,1516410546.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:06.223Z,1516410546.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:06.601Z,1516410546.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:06.615Z,1516410546.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:07.011Z,1516410547.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:07.051Z,1516410547.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:07.412Z,1516410547.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:07.419Z,1516410547.419 [PNI_TCM](ERROR): CRC does not match. Expected:0x64859 got:0x16817
2018-01-20T01:09:07.458Z,1516410547.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:07.814Z,1516410547.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:07.828Z,1516410547.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:08.205Z,1516410548.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:08.219Z,1516410548.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:08.587Z,1516410548.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:08.628Z,1516410548.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:09.004Z,1516410549.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:09.022Z,1516410549.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:09.407Z,1516410549.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:09.421Z,1516410549.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:09.807Z,1516410549.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:09.834Z,1516410549.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:10.215Z,1516410550.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:10.258Z,1516410550.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:10.617Z,1516410550.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:10.624Z,1516410550.624 [PNI_TCM](ERROR): CRC does not match. Expected:0x39897 got:0x1857
2018-01-20T01:09:10.658Z,1516410550.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:11.008Z,1516410551.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:11.022Z,1516410551.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:11.401Z,1516410551.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:11.423Z,1516410551.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:11.814Z,1516410551.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:11.839Z,1516410551.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:12.206Z,1516410552.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:12.219Z,1516410552.219 [PNI_TCM](ERROR): CRC does not match. Expected:0x27791 got:0x1631
2018-01-20T01:09:12.257Z,1516410552.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:12.613Z,1516410552.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:12.627Z,1516410552.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:13.009Z,1516410553.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:13.023Z,1516410553.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:13.389Z,1516410553.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:13.415Z,1516410553.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:13.809Z,1516410553.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:13.827Z,1516410553.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:14.218Z,1516410554.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:14.232Z,1516410554.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:14.616Z,1516410554.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:14.630Z,1516410554.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:14.996Z,1516410554.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:15.039Z,1516410555.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:15.395Z,1516410555.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:15.425Z,1516410555.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:15.807Z,1516410555.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:15.824Z,1516410555.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:15.838Z,1516410555.838 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T01:09:16.217Z,1516410556.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:16.231Z,1516410556.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:16.608Z,1516410556.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:16.638Z,1516410556.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:16.996Z,1516410556.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:17.025Z,1516410557.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:17.391Z,1516410557.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:17.423Z,1516410557.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:17.819Z,1516410557.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:17.833Z,1516410557.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:18.210Z,1516410558.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:18.243Z,1516410558.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:18.614Z,1516410558.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:18.635Z,1516410558.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:18.992Z,1516410558.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:19.031Z,1516410559.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:19.385Z,1516410559.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:19.399Z,1516410559.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:19.802Z,1516410559.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:19.842Z,1516410559.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:20.219Z,1516410560.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:20.237Z,1516410560.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:20.606Z,1516410560.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:20.643Z,1516410560.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:20.996Z,1516410560.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:21.038Z,1516410561.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:21.391Z,1516410561.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:21.442Z,1516410561.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:21.802Z,1516410561.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:21.831Z,1516410561.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:22.206Z,1516410562.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:22.243Z,1516410562.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:22.612Z,1516410562.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:22.643Z,1516410562.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:23.000Z,1516410563.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:23.035Z,1516410563.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:23.399Z,1516410563.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:23.436Z,1516410563.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:23.810Z,1516410563.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:23.839Z,1516410563.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:24.211Z,1516410564.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:24.236Z,1516410564.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:24.610Z,1516410564.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:24.647Z,1516410564.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:24.998Z,1516410564.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:25.012Z,1516410565.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:25.393Z,1516410565.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:25.407Z,1516410565.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:25.811Z,1516410565.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:25.839Z,1516410565.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:26.210Z,1516410566.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:26.245Z,1516410566.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:26.606Z,1516410566.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:26.620Z,1516410566.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:26.998Z,1516410566.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:27.012Z,1516410567.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:27.396Z,1516410567.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:27.427Z,1516410567.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:27.806Z,1516410567.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:27.820Z,1516410567.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:28.210Z,1516410568.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:28.224Z,1516410568.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:28.618Z,1516410568.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:28.655Z,1516410568.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:28.998Z,1516410568.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:29.018Z,1516410569.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:29.402Z,1516410569.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:29.417Z,1516410569.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:29.806Z,1516410569.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:29.821Z,1516410569.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:30.210Z,1516410570.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:30.224Z,1516410570.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:30.606Z,1516410570.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:30.623Z,1516410570.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:31.004Z,1516410571.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:31.019Z,1516410571.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:31.399Z,1516410571.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:31.419Z,1516410571.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:31.806Z,1516410571.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:31.820Z,1516410571.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:32.210Z,1516410572.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:32.228Z,1516410572.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:32.609Z,1516410572.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:32.627Z,1516410572.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:33.004Z,1516410573.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:33.018Z,1516410573.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:33.404Z,1516410573.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:33.423Z,1516410573.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:33.809Z,1516410573.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:33.824Z,1516410573.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:34.210Z,1516410574.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:34.224Z,1516410574.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:34.610Z,1516410574.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:34.624Z,1516410574.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:35.003Z,1516410575.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:35.023Z,1516410575.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:35.400Z,1516410575.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:35.414Z,1516410575.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:35.810Z,1516410575.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:35.824Z,1516410575.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:36.210Z,1516410576.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:36.224Z,1516410576.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:36.610Z,1516410576.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:36.631Z,1516410576.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:37.002Z,1516410577.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:37.016Z,1516410577.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:37.406Z,1516410577.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:37.420Z,1516410577.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:37.809Z,1516410577.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:37.823Z,1516410577.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:38.215Z,1516410578.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:38.230Z,1516410578.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:38.617Z,1516410578.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:38.633Z,1516410578.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:39.016Z,1516410579.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:39.035Z,1516410579.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:39.407Z,1516410579.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:39.421Z,1516410579.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:39.788Z,1516410579.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:39.824Z,1516410579.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:40.206Z,1516410580.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:40.221Z,1516410580.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:40.604Z,1516410580.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:40.619Z,1516410580.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:40.622Z,1516410580.622 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T01:09:40.622Z,1516410580.622 [Default:CheckIn:C.Wait] Stopped
2018-01-20T01:09:40.622Z,1516410580.622 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T01:09:40.623Z,1516410580.623 [Default:CheckIn:D] Running Loop=1
2018-01-20T01:09:41.002Z,1516410581.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:41.034Z,1516410581.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:41.038Z,1516410581.038 [Default:CheckIn:D] Stopped
2018-01-20T01:09:41.038Z,1516410581.038 [Default:CheckIn:E] Running Loop=1
2018-01-20T01:09:41.419Z,1516410581.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:41.433Z,1516410581.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:41.436Z,1516410581.436 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.282884 min 
2018-01-20T01:09:41.436Z,1516410581.436 [Default:CheckIn:E] Stopped
2018-01-20T01:09:41.437Z,1516410581.437 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T01:09:41.437Z,1516410581.437 [Default:CheckIn] Stopped
2018-01-20T01:09:41.437Z,1516410581.437 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T01:09:41.437Z,1516410581.437 [Default:CheckIn](INFO): Running loop #3
2018-01-20T01:09:41.437Z,1516410581.437 [Default:CheckIn] Running Loop=3
2018-01-20T01:09:41.438Z,1516410581.438 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T01:09:41.438Z,1516410581.438 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T01:09:44.522Z,1516410584.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:44.537Z,1516410584.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:44.638Z,1516410584.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:44.674Z,1516410584.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:45.015Z,1516410585.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:45.040Z,1516410585.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:45.426Z,1516410585.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:45.440Z,1516410585.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:45.827Z,1516410585.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:45.842Z,1516410585.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:46.233Z,1516410586.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:46.249Z,1516410586.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:46.625Z,1516410586.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:46.640Z,1516410586.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:47.024Z,1516410587.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:47.039Z,1516410587.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:47.411Z,1516410587.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:47.443Z,1516410587.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:47.825Z,1516410587.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:47.839Z,1516410587.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:48.238Z,1516410588.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:48.257Z,1516410588.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:48.634Z,1516410588.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:48.648Z,1516410588.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:49.007Z,1516410589.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:49.050Z,1516410589.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:49.416Z,1516410589.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:49.446Z,1516410589.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:49.811Z,1516410589.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:49.846Z,1516410589.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:50.218Z,1516410590.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:50.247Z,1516410590.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:50.636Z,1516410590.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:50.651Z,1516410590.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:51.022Z,1516410591.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:51.054Z,1516410591.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:51.415Z,1516410591.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:51.448Z,1516410591.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:51.815Z,1516410591.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:51.847Z,1516410591.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:52.212Z,1516410592.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:52.238Z,1516410592.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:52.615Z,1516410592.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:52.654Z,1516410592.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:53.022Z,1516410593.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:53.047Z,1516410593.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:53.426Z,1516410593.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:53.451Z,1516410593.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:53.821Z,1516410593.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:53.858Z,1516410593.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:54.215Z,1516410594.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:54.250Z,1516410594.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:54.611Z,1516410594.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:54.651Z,1516410594.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:55.015Z,1516410595.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:55.058Z,1516410595.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:55.416Z,1516410595.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:55.430Z,1516410595.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:55.819Z,1516410595.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:55.859Z,1516410595.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:56.230Z,1516410596.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:56.255Z,1516410596.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:56.626Z,1516410596.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:56.656Z,1516410596.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:57.030Z,1516410597.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:57.062Z,1516410597.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:57.412Z,1516410597.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:57.438Z,1516410597.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:57.812Z,1516410597.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:57.826Z,1516410597.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:58.220Z,1516410598.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:58.234Z,1516410598.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:58.615Z,1516410598.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:58.629Z,1516410598.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:59.030Z,1516410599.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:59.060Z,1516410599.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:59.430Z,1516410599.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:59.444Z,1516410599.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:09:59.834Z,1516410599.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:09:59.867Z,1516410599.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:00.219Z,1516410600.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:00.235Z,1516410600.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:00.617Z,1516410600.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:00.635Z,1516410600.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:01.016Z,1516410601.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:01.030Z,1516410601.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:01.419Z,1516410601.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:01.433Z,1516410601.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:01.820Z,1516410601.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:01.834Z,1516410601.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:02.221Z,1516410602.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:02.235Z,1516410602.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:02.634Z,1516410602.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:02.648Z,1516410602.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:03.026Z,1516410603.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:03.040Z,1516410603.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:03.423Z,1516410603.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:03.437Z,1516410603.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:03.823Z,1516410603.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:03.837Z,1516410603.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:04.220Z,1516410604.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:04.234Z,1516410604.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:04.616Z,1516410604.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:04.629Z,1516410604.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:05.024Z,1516410605.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:05.043Z,1516410605.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:05.426Z,1516410605.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:05.440Z,1516410605.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:05.826Z,1516410605.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:05.846Z,1516410605.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:06.221Z,1516410606.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:06.235Z,1516410606.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:06.619Z,1516410606.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:06.633Z,1516410606.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:07.024Z,1516410607.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:07.038Z,1516410607.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:07.423Z,1516410607.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:07.443Z,1516410607.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:07.819Z,1516410607.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:07.833Z,1516410607.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:08.226Z,1516410608.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:08.240Z,1516410608.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:08.630Z,1516410608.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:08.644Z,1516410608.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:09.024Z,1516410609.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:09.043Z,1516410609.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:09.424Z,1516410609.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:09.437Z,1516410609.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:09.823Z,1516410609.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:09.838Z,1516410609.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:10.219Z,1516410610.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:10.233Z,1516410610.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:10.624Z,1516410610.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:10.637Z,1516410610.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:11.023Z,1516410611.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:11.037Z,1516410611.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:11.426Z,1516410611.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:11.440Z,1516410611.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:11.825Z,1516410611.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:11.843Z,1516410611.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:12.226Z,1516410612.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:12.240Z,1516410612.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:12.623Z,1516410612.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:12.637Z,1516410612.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:13.023Z,1516410613.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:13.037Z,1516410613.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:13.423Z,1516410613.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:13.443Z,1516410613.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:13.819Z,1516410613.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:13.833Z,1516410613.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:14.226Z,1516410614.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:14.240Z,1516410614.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:14.630Z,1516410614.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:14.644Z,1516410614.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:15.026Z,1516410615.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:15.040Z,1516410615.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:15.425Z,1516410615.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:15.438Z,1516410615.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:15.820Z,1516410615.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:15.834Z,1516410615.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:16.218Z,1516410616.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:16.236Z,1516410616.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:16.623Z,1516410616.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:16.636Z,1516410616.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:17.016Z,1516410617.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:17.042Z,1516410617.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:17.434Z,1516410617.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:17.455Z,1516410617.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:17.835Z,1516410617.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:17.848Z,1516410617.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:18.234Z,1516410618.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:18.248Z,1516410618.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:18.618Z,1516410618.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:18.645Z,1516410618.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:19.012Z,1516410619.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:19.039Z,1516410619.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:19.406Z,1516410619.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:19.443Z,1516410619.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:19.816Z,1516410619.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:19.843Z,1516410619.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:20.222Z,1516410620.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:20.249Z,1516410620.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:20.638Z,1516410620.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:20.655Z,1516410620.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:21.031Z,1516410621.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:21.052Z,1516410621.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:21.411Z,1516410621.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:21.439Z,1516410621.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:21.806Z,1516410621.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:21.829Z,1516410621.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:22.211Z,1516410622.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:22.247Z,1516410622.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:22.616Z,1516410622.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:22.649Z,1516410622.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:23.006Z,1516410623.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:23.020Z,1516410623.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:23.422Z,1516410623.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:23.448Z,1516410623.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:23.826Z,1516410623.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:23.855Z,1516410623.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:24.227Z,1516410624.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:24.253Z,1516410624.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:24.611Z,1516410624.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:24.647Z,1516410624.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:25.015Z,1516410625.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:25.029Z,1516410625.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:25.409Z,1516410625.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:25.423Z,1516410625.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:25.819Z,1516410625.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:25.835Z,1516410625.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:26.226Z,1516410626.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:26.240Z,1516410626.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:26.634Z,1516410626.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:26.666Z,1516410626.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:27.026Z,1516410627.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:27.040Z,1516410627.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:27.416Z,1516410627.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:27.430Z,1516410627.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:27.814Z,1516410627.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:27.834Z,1516410627.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:28.218Z,1516410628.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:28.232Z,1516410628.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:28.617Z,1516410628.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:28.631Z,1516410628.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:29.017Z,1516410629.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:29.031Z,1516410629.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:29.426Z,1516410629.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:29.441Z,1516410629.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:29.830Z,1516410629.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:29.844Z,1516410629.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:30.224Z,1516410630.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:30.243Z,1516410630.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:30.622Z,1516410630.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:30.636Z,1516410630.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:31.023Z,1516410631.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:31.037Z,1516410631.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:31.410Z,1516410631.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:31.431Z,1516410631.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:31.822Z,1516410631.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:31.836Z,1516410631.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:32.226Z,1516410632.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:32.240Z,1516410632.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:32.623Z,1516410632.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:32.643Z,1516410632.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:33.024Z,1516410633.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:33.043Z,1516410633.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:33.423Z,1516410633.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:33.437Z,1516410633.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:33.817Z,1516410633.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:33.831Z,1516410633.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:34.219Z,1516410634.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:34.233Z,1516410634.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:34.617Z,1516410634.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:34.630Z,1516410634.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:35.017Z,1516410635.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:35.031Z,1516410635.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:35.424Z,1516410635.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:35.443Z,1516410635.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:35.830Z,1516410635.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:35.843Z,1516410635.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:36.223Z,1516410636.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:36.243Z,1516410636.243 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:36.243Z,1516410636.243 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2018-01-20T01:10:36.243Z,1516410636.243 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:10:36.245Z,1516410636.245 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:36.245Z,1516410636.245 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2018-01-20T01:10:36.245Z,1516410636.245 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:10:36.247Z,1516410636.247 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:36.247Z,1516410636.247 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 80
2018-01-20T01:10:36.247Z,1516410636.247 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:10:36.279Z,1516410636.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:10:36.279Z,1516410636.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:10:36.279Z,1516410636.279 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:10:36.614Z,1516410636.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:36.663Z,1516410636.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:10:36.663Z,1516410636.663 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2018-01-20T01:10:36.664Z,1516410636.664 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:10:36.664Z,1516410636.664 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2018-01-20T01:10:36.664Z,1516410636.664 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:10:36.664Z,1516410636.664 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 80
2018-01-20T01:10:37.007Z,1516410637.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:37.032Z,1516410637.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:10:37.033Z,1516410637.033 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:10:37.033Z,1516410637.033 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:10:37.033Z,1516410637.033 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:10:37.034Z,1516410637.034 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:10:37.034Z,1516410637.034 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:10:37.035Z,1516410637.035 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:10:37.035Z,1516410637.035 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:10:37.035Z,1516410637.035 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:10:37.408Z,1516410637.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:37.442Z,1516410637.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:10:37.443Z,1516410637.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:37.815Z,1516410637.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:37.840Z,1516410637.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:10:37.841Z,1516410637.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:38.227Z,1516410638.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:38.241Z,1516410638.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:10:38.242Z,1516410638.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:38.638Z,1516410638.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:38.651Z,1516410638.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:10:38.652Z,1516410638.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:39.041Z,1516410639.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:39.055Z,1516410639.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:10:39.056Z,1516410639.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:39.407Z,1516410639.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:39.443Z,1516410639.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:10:39.444Z,1516410639.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:39.809Z,1516410639.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:39.831Z,1516410639.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:10:39.832Z,1516410639.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:40.215Z,1516410640.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:40.246Z,1516410640.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:10:40.247Z,1516410640.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:40.608Z,1516410640.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:40.650Z,1516410640.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:10:40.651Z,1516410640.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:41.006Z,1516410641.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:41.020Z,1516410641.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:10:41.021Z,1516410641.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:41.422Z,1516410641.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:41.447Z,1516410641.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:10:41.447Z,1516410641.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:44.586Z,1516410644.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:44.600Z,1516410644.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:10:44.601Z,1516410644.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:44.714Z,1516410644.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:44.747Z,1516410644.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-01-20T01:10:44.748Z,1516410644.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:45.052Z,1516410645.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:45.076Z,1516410645.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:10:45.085Z,1516410645.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:45.459Z,1516410645.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:45.472Z,1516410645.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:10:45.473Z,1516410645.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:45.846Z,1516410645.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:45.865Z,1516410645.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:10:45.866Z,1516410645.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:46.262Z,1516410646.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:46.276Z,1516410646.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:10:46.277Z,1516410646.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:46.657Z,1516410646.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:46.670Z,1516410646.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:10:46.671Z,1516410646.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:47.058Z,1516410647.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:47.072Z,1516410647.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:10:47.073Z,1516410647.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:47.455Z,1516410647.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:47.474Z,1516410647.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:10:47.475Z,1516410647.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:47.856Z,1516410647.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:47.870Z,1516410647.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:10:47.871Z,1516410647.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:48.248Z,1516410648.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:48.268Z,1516410648.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:10:48.269Z,1516410648.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:48.656Z,1516410648.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:48.670Z,1516410648.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:10:48.671Z,1516410648.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:49.058Z,1516410649.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:49.072Z,1516410649.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:10:49.073Z,1516410649.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:49.470Z,1516410649.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:49.499Z,1516410649.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-01-20T01:10:49.500Z,1516410649.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:49.858Z,1516410649.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:49.872Z,1516410649.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:10:49.873Z,1516410649.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:50.256Z,1516410650.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:50.270Z,1516410650.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:10:50.271Z,1516410650.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:50.656Z,1516410650.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:50.678Z,1516410650.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:10:50.679Z,1516410650.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:51.055Z,1516410651.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:51.074Z,1516410651.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:10:51.075Z,1516410651.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:51.460Z,1516410651.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:51.473Z,1516410651.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:10:51.474Z,1516410651.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:51.845Z,1516410651.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:51.867Z,1516410651.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:10:51.868Z,1516410651.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:52.270Z,1516410652.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:52.284Z,1516410652.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:10:52.285Z,1516410652.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:52.666Z,1516410652.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:52.680Z,1516410652.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:10:52.681Z,1516410652.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:53.058Z,1516410653.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:53.091Z,1516410653.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:10:53.092Z,1516410653.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:53.451Z,1516410653.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:53.476Z,1516410653.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:10:53.477Z,1516410653.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:53.843Z,1516410653.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:53.875Z,1516410653.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:10:53.876Z,1516410653.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:54.252Z,1516410654.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:54.277Z,1516410654.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:10:54.278Z,1516410654.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:54.647Z,1516410654.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:54.672Z,1516410654.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:10:54.673Z,1516410654.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:55.058Z,1516410655.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:55.088Z,1516410655.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:10:55.089Z,1516410655.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:55.464Z,1516410655.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:55.486Z,1516410655.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:10:55.487Z,1516410655.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:55.870Z,1516410655.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:55.884Z,1516410655.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:10:55.885Z,1516410655.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:56.247Z,1516410656.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:56.283Z,1516410656.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:56.651Z,1516410656.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:56.677Z,1516410656.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:57.047Z,1516410657.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:57.079Z,1516410657.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:57.452Z,1516410657.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:57.479Z,1516410657.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:57.846Z,1516410657.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:57.883Z,1516410657.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:58.270Z,1516410658.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:58.285Z,1516410658.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:58.672Z,1516410658.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:58.686Z,1516410658.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:59.058Z,1516410659.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:59.096Z,1516410659.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:59.452Z,1516410659.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:59.483Z,1516410659.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:10:59.852Z,1516410659.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:10:59.884Z,1516410659.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:00.253Z,1516410660.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:00.283Z,1516410660.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:00.647Z,1516410660.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:00.683Z,1516410660.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:01.072Z,1516410661.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:01.086Z,1516410661.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:01.454Z,1516410661.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:01.483Z,1516410661.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:01.858Z,1516410661.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:01.891Z,1516410661.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:02.255Z,1516410662.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:02.283Z,1516410662.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:02.648Z,1516410662.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:02.678Z,1516410662.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:03.052Z,1516410663.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:03.082Z,1516410663.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:03.453Z,1516410663.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:03.467Z,1516410663.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:03.843Z,1516410663.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:03.866Z,1516410663.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:04.270Z,1516410664.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:04.300Z,1516410664.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:04.670Z,1516410664.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:04.684Z,1516410664.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:05.058Z,1516410665.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:05.072Z,1516410665.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:05.455Z,1516410665.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:05.470Z,1516410665.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:05.852Z,1516410665.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:05.867Z,1516410665.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:06.258Z,1516410666.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:06.272Z,1516410666.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:06.656Z,1516410666.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:06.675Z,1516410666.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:07.070Z,1516410667.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:07.107Z,1516410667.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:07.456Z,1516410667.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:07.471Z,1516410667.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:07.871Z,1516410667.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:07.902Z,1516410667.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:08.259Z,1516410668.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:08.274Z,1516410668.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:08.659Z,1516410668.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:08.673Z,1516410668.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:09.055Z,1516410669.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:09.069Z,1516410669.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:09.452Z,1516410669.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:09.470Z,1516410669.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:09.852Z,1516410669.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:09.869Z,1516410669.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:10.260Z,1516410670.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:10.279Z,1516410670.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:10.666Z,1516410670.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:10.680Z,1516410670.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:11.058Z,1516410671.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:11.080Z,1516410671.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:11.459Z,1516410671.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:11.479Z,1516410671.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:11.860Z,1516410671.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:11.874Z,1516410671.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:12.261Z,1516410672.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:12.275Z,1516410672.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:12.659Z,1516410672.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:12.679Z,1516410672.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:13.065Z,1516410673.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:13.079Z,1516410673.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:13.464Z,1516410673.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:13.483Z,1516410673.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:13.864Z,1516410673.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:13.883Z,1516410673.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:14.260Z,1516410674.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:14.274Z,1516410674.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:14.659Z,1516410674.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:14.679Z,1516410674.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:15.050Z,1516410675.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:15.072Z,1516410675.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:15.461Z,1516410675.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:15.474Z,1516410675.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:15.853Z,1516410675.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:15.870Z,1516410675.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:16.234Z,1516410676.234 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T01:11:16.234Z,1516410676.234 [NAL9602] Data Fault, FailCount= 2
2018-01-20T01:11:16.234Z,1516410676.234 [NAL9602](ERROR): Data Fault
2018-01-20T01:11:16.266Z,1516410676.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:16.287Z,1516410676.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:16.316Z,1516410676.316 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T01:11:16.634Z,1516410676.634 [NAL9602](INFO): Powering down
2018-01-20T01:11:16.665Z,1516410676.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:16.679Z,1516410676.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:17.044Z,1516410677.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:17.075Z,1516410677.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:17.458Z,1516410677.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:17.472Z,1516410677.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:17.485Z,1516410677.485 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T01:11:17.485Z,1516410677.485 [NAL9602] No Fault, FailCount= 2
2018-01-20T01:11:17.859Z,1516410677.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:17.872Z,1516410677.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:18.258Z,1516410678.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:18.273Z,1516410678.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:18.663Z,1516410678.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:18.677Z,1516410678.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:19.058Z,1516410679.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:19.072Z,1516410679.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:19.444Z,1516410679.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:19.474Z,1516410679.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:19.843Z,1516410679.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:19.878Z,1516410679.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:20.259Z,1516410680.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:20.273Z,1516410680.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:20.658Z,1516410680.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:20.673Z,1516410680.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:21.047Z,1516410681.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:21.079Z,1516410681.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:21.459Z,1516410681.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:21.479Z,1516410681.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:21.845Z,1516410681.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:21.875Z,1516410681.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:22.251Z,1516410682.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:22.276Z,1516410682.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:22.651Z,1516410682.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:22.677Z,1516410682.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:23.040Z,1516410683.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:23.063Z,1516410683.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:23.450Z,1516410683.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:23.475Z,1516410683.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:23.851Z,1516410683.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:23.877Z,1516410683.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:24.251Z,1516410684.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:24.276Z,1516410684.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:24.643Z,1516410684.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:24.678Z,1516410684.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:25.051Z,1516410685.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:25.077Z,1516410685.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:25.444Z,1516410685.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:25.471Z,1516410685.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:25.851Z,1516410685.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:25.883Z,1516410685.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:26.251Z,1516410686.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:26.283Z,1516410686.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:26.651Z,1516410686.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:26.685Z,1516410686.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:27.054Z,1516410687.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:27.085Z,1516410687.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:27.448Z,1516410687.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:27.488Z,1516410687.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:27.852Z,1516410687.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:27.878Z,1516410687.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:28.251Z,1516410688.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:28.264Z,1516410688.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:28.648Z,1516410688.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:28.667Z,1516410688.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:29.055Z,1516410689.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:29.069Z,1516410689.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:29.454Z,1516410689.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:29.468Z,1516410689.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:29.852Z,1516410689.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:29.871Z,1516410689.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:30.255Z,1516410690.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:30.269Z,1516410690.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:30.655Z,1516410690.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:30.668Z,1516410690.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:31.063Z,1516410691.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:31.095Z,1516410691.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:31.455Z,1516410691.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:31.469Z,1516410691.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:31.855Z,1516410691.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:31.868Z,1516410691.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:32.248Z,1516410692.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:32.262Z,1516410692.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:32.650Z,1516410692.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:32.664Z,1516410692.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:33.055Z,1516410693.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:33.068Z,1516410693.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:33.452Z,1516410693.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:33.467Z,1516410693.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:33.859Z,1516410693.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:33.873Z,1516410693.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:34.257Z,1516410694.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:34.270Z,1516410694.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:34.652Z,1516410694.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:34.667Z,1516410694.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:35.050Z,1516410695.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:35.064Z,1516410695.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:35.457Z,1516410695.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:35.471Z,1516410695.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:35.856Z,1516410695.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:35.875Z,1516410695.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:36.252Z,1516410696.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:36.266Z,1516410696.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:36.654Z,1516410696.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:36.668Z,1516410696.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:37.052Z,1516410697.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:37.066Z,1516410697.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:37.454Z,1516410697.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:37.474Z,1516410697.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:37.857Z,1516410697.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:37.870Z,1516410697.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:38.257Z,1516410698.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:38.271Z,1516410698.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:38.651Z,1516410698.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:38.666Z,1516410698.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:39.051Z,1516410699.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:39.066Z,1516410699.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:39.453Z,1516410699.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:39.467Z,1516410699.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:39.851Z,1516410699.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:39.866Z,1516410699.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:40.255Z,1516410700.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:40.270Z,1516410700.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:40.655Z,1516410700.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:40.668Z,1516410700.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:41.056Z,1516410701.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:41.070Z,1516410701.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:41.458Z,1516410701.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:41.472Z,1516410701.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:44.562Z,1516410704.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:44.576Z,1516410704.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:44.670Z,1516410704.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:44.700Z,1516410704.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:45.057Z,1516410705.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:45.089Z,1516410705.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:45.457Z,1516410705.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:45.471Z,1516410705.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:45.856Z,1516410705.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:45.871Z,1516410705.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:46.260Z,1516410706.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:46.274Z,1516410706.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:46.655Z,1516410706.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:46.669Z,1516410706.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:47.043Z,1516410707.043 [NAL9602](INFO): Powering up NAL9602
2018-01-20T01:11:47.061Z,1516410707.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:47.076Z,1516410707.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:47.460Z,1516410707.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:47.474Z,1516410707.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:47.855Z,1516410707.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:47.869Z,1516410707.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:48.260Z,1516410708.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:48.275Z,1516410708.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:48.659Z,1516410708.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:48.673Z,1516410708.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:49.055Z,1516410709.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:49.069Z,1516410709.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:49.454Z,1516410709.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:49.468Z,1516410709.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:49.860Z,1516410709.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:49.874Z,1516410709.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:50.254Z,1516410710.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:50.267Z,1516410710.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:50.655Z,1516410710.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:50.669Z,1516410710.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:51.057Z,1516410711.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:51.071Z,1516410711.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:51.452Z,1516410711.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:51.466Z,1516410711.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:51.860Z,1516410711.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:51.874Z,1516410711.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:52.260Z,1516410712.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:52.274Z,1516410712.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:52.660Z,1516410712.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:52.673Z,1516410712.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:53.060Z,1516410713.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:53.074Z,1516410713.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:53.458Z,1516410713.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:53.471Z,1516410713.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:53.856Z,1516410713.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:53.869Z,1516410713.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:54.260Z,1516410714.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:54.274Z,1516410714.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:54.657Z,1516410714.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:54.671Z,1516410714.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:55.047Z,1516410715.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:55.072Z,1516410715.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:55.463Z,1516410715.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:55.477Z,1516410715.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:55.847Z,1516410715.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:55.878Z,1516410715.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:56.248Z,1516410716.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:56.273Z,1516410716.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:56.659Z,1516410716.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:56.673Z,1516410716.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:57.059Z,1516410717.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:57.078Z,1516410717.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:57.447Z,1516410717.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:57.483Z,1516410717.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:57.872Z,1516410717.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:57.891Z,1516410717.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:58.238Z,1516410718.238 [NAL9602](INFO): NAL9602 initialized
2018-01-20T01:11:58.267Z,1516410718.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:58.287Z,1516410718.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:58.663Z,1516410718.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:58.676Z,1516410718.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:59.074Z,1516410719.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:59.095Z,1516410719.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:59.472Z,1516410719.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:59.491Z,1516410719.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:11:59.872Z,1516410719.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:11:59.886Z,1516410719.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:00.264Z,1516410720.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:00.283Z,1516410720.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:00.658Z,1516410720.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:00.677Z,1516410720.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:01.047Z,1516410721.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:01.073Z,1516410721.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:01.470Z,1516410721.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:01.485Z,1516410721.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:01.872Z,1516410721.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:01.891Z,1516410721.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:02.273Z,1516410722.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:02.287Z,1516410722.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:02.665Z,1516410722.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:02.679Z,1516410722.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:03.051Z,1516410723.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:03.082Z,1516410723.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:03.465Z,1516410723.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:03.479Z,1516410723.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:03.874Z,1516410723.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:03.888Z,1516410723.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:04.269Z,1516410724.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:04.283Z,1516410724.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:04.652Z,1516410724.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:04.677Z,1516410724.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:05.064Z,1516410725.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:05.078Z,1516410725.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:05.470Z,1516410725.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:05.484Z,1516410725.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:05.868Z,1516410725.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:05.893Z,1516410725.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:06.275Z,1516410726.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:06.289Z,1516410726.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:06.652Z,1516410726.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:06.682Z,1516410726.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:07.047Z,1516410727.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:07.078Z,1516410727.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:07.475Z,1516410727.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:07.489Z,1516410727.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:07.874Z,1516410727.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:07.888Z,1516410727.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:08.265Z,1516410728.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:08.278Z,1516410728.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:08.665Z,1516410728.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:08.679Z,1516410728.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:09.051Z,1516410729.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:09.082Z,1516410729.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:09.465Z,1516410729.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:09.479Z,1516410729.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:09.874Z,1516410729.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:09.888Z,1516410729.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:10.274Z,1516410730.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:10.287Z,1516410730.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:10.647Z,1516410730.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:10.678Z,1516410730.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:11.065Z,1516410731.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:11.079Z,1516410731.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:11.451Z,1516410731.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:11.482Z,1516410731.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:11.866Z,1516410731.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:11.880Z,1516410731.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:12.277Z,1516410732.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:12.299Z,1516410732.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:12.674Z,1516410732.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:12.688Z,1516410732.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:13.047Z,1516410733.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:13.072Z,1516410733.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:13.464Z,1516410733.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:13.478Z,1516410733.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:13.852Z,1516410733.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:13.878Z,1516410733.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:14.255Z,1516410734.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:14.282Z,1516410734.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:14.675Z,1516410734.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:14.690Z,1516410734.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:15.081Z,1516410735.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:15.099Z,1516410735.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:15.479Z,1516410735.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:15.493Z,1516410735.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:15.850Z,1516410735.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:15.876Z,1516410735.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:16.256Z,1516410736.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:16.281Z,1516410736.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:16.652Z,1516410736.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:16.686Z,1516410736.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:17.049Z,1516410737.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:17.072Z,1516410737.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:17.455Z,1516410737.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:17.486Z,1516410737.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:17.858Z,1516410737.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:17.894Z,1516410737.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:18.280Z,1516410738.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:18.294Z,1516410738.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:18.662Z,1516410738.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:18.688Z,1516410738.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:19.051Z,1516410739.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:19.088Z,1516410739.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:19.450Z,1516410739.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:19.464Z,1516410739.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:19.853Z,1516410739.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:19.867Z,1516410739.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:20.256Z,1516410740.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:20.269Z,1516410740.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:20.659Z,1516410740.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:20.681Z,1516410740.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:21.074Z,1516410741.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:21.099Z,1516410741.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:21.470Z,1516410741.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:21.499Z,1516410741.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:21.854Z,1516410741.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:21.868Z,1516410741.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:22.260Z,1516410742.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:22.275Z,1516410742.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:22.660Z,1516410742.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:22.674Z,1516410742.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:23.054Z,1516410743.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:23.069Z,1516410743.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:23.457Z,1516410743.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:23.472Z,1516410743.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:23.871Z,1516410743.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:23.901Z,1516410743.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:24.266Z,1516410744.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:24.301Z,1516410744.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:24.675Z,1516410744.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:24.710Z,1516410744.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:25.062Z,1516410745.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:25.076Z,1516410745.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:25.457Z,1516410745.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:25.472Z,1516410745.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:25.863Z,1516410745.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:25.883Z,1516410745.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:26.262Z,1516410746.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:26.276Z,1516410746.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:26.666Z,1516410746.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:26.680Z,1516410746.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:27.066Z,1516410747.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:27.080Z,1516410747.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:27.464Z,1516410747.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:27.482Z,1516410747.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:27.853Z,1516410747.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:27.867Z,1516410747.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:28.259Z,1516410748.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:28.273Z,1516410748.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:28.659Z,1516410748.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:28.678Z,1516410748.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:29.054Z,1516410749.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:29.068Z,1516410749.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:29.459Z,1516410749.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:29.473Z,1516410749.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:29.864Z,1516410749.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:29.878Z,1516410749.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:30.265Z,1516410750.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:30.279Z,1516410750.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:30.666Z,1516410750.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:30.680Z,1516410750.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:31.063Z,1516410751.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:31.077Z,1516410751.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:31.453Z,1516410751.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:31.467Z,1516410751.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:31.863Z,1516410751.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:31.883Z,1516410751.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:32.262Z,1516410752.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:32.276Z,1516410752.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:32.666Z,1516410752.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:32.680Z,1516410752.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:33.066Z,1516410753.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:33.080Z,1516410753.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:33.465Z,1516410753.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:33.482Z,1516410753.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:33.853Z,1516410753.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:33.867Z,1516410753.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:34.259Z,1516410754.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:34.273Z,1516410754.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:34.655Z,1516410754.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:34.669Z,1516410754.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:35.058Z,1516410755.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:35.072Z,1516410755.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:35.458Z,1516410755.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:35.472Z,1516410755.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:35.864Z,1516410755.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:35.882Z,1516410755.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:36.265Z,1516410756.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:36.279Z,1516410756.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:36.663Z,1516410756.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:36.683Z,1516410756.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:37.062Z,1516410757.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:37.076Z,1516410757.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:37.457Z,1516410757.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:37.471Z,1516410757.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:37.858Z,1516410757.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:37.876Z,1516410757.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:38.262Z,1516410758.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:38.276Z,1516410758.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:38.665Z,1516410758.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:38.680Z,1516410758.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:39.066Z,1516410759.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:39.080Z,1516410759.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:39.464Z,1516410759.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:39.478Z,1516410759.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:39.857Z,1516410759.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:39.871Z,1516410759.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:40.259Z,1516410760.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:40.273Z,1516410760.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:40.659Z,1516410760.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:40.679Z,1516410760.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:41.059Z,1516410761.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:41.073Z,1516410761.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:41.460Z,1516410761.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:41.474Z,1516410761.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:44.569Z,1516410764.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:44.583Z,1516410764.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:44.694Z,1516410764.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:44.735Z,1516410764.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:45.086Z,1516410765.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:45.115Z,1516410765.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:45.477Z,1516410765.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:45.490Z,1516410765.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:45.873Z,1516410765.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:45.887Z,1516410765.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:46.272Z,1516410766.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:46.286Z,1516410766.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:46.686Z,1516410766.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:46.716Z,1516410766.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:47.072Z,1516410767.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:47.090Z,1516410767.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:47.486Z,1516410767.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:47.515Z,1516410767.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:47.872Z,1516410767.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:47.885Z,1516410767.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:48.267Z,1516410768.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:48.281Z,1516410768.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:48.671Z,1516410768.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:48.691Z,1516410768.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:49.073Z,1516410769.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:49.087Z,1516410769.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:49.462Z,1516410769.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:49.483Z,1516410769.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:49.874Z,1516410769.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:49.888Z,1516410769.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:50.286Z,1516410770.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:50.317Z,1516410770.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:50.686Z,1516410770.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:50.715Z,1516410770.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:51.069Z,1516410771.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:51.088Z,1516410771.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:51.472Z,1516410771.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:51.486Z,1516410771.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:51.871Z,1516410771.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:51.889Z,1516410771.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:52.273Z,1516410772.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:52.287Z,1516410772.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:52.686Z,1516410772.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:52.716Z,1516410772.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:53.075Z,1516410773.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:53.095Z,1516410773.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:53.486Z,1516410773.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:53.516Z,1516410773.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:53.869Z,1516410773.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:53.890Z,1516410773.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:54.273Z,1516410774.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:54.288Z,1516410774.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:54.670Z,1516410774.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:54.690Z,1516410774.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:55.072Z,1516410775.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:55.086Z,1516410775.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:55.466Z,1516410775.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:55.486Z,1516410775.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:55.874Z,1516410775.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:55.889Z,1516410775.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:56.286Z,1516410776.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:56.317Z,1516410776.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:56.686Z,1516410776.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:56.715Z,1516410776.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:57.073Z,1516410777.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:57.087Z,1516410777.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:57.467Z,1516410777.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:57.507Z,1516410777.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:57.874Z,1516410777.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:57.888Z,1516410777.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:58.273Z,1516410778.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:58.287Z,1516410778.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:58.686Z,1516410778.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:58.718Z,1516410778.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:59.073Z,1516410779.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:59.087Z,1516410779.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:59.486Z,1516410779.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:59.515Z,1516410779.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:12:59.873Z,1516410779.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:12:59.886Z,1516410779.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:00.264Z,1516410780.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:00.290Z,1516410780.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:00.675Z,1516410780.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:00.690Z,1516410780.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:01.077Z,1516410781.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:01.091Z,1516410781.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:01.470Z,1516410781.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:01.484Z,1516410781.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:01.878Z,1516410781.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:01.892Z,1516410781.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:02.278Z,1516410782.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:02.292Z,1516410782.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:02.675Z,1516410782.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:02.695Z,1516410782.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:03.075Z,1516410783.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:03.091Z,1516410783.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:03.467Z,1516410783.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:03.481Z,1516410783.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:03.864Z,1516410783.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:03.886Z,1516410783.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:04.271Z,1516410784.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:04.285Z,1516410784.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:04.681Z,1516410784.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:04.696Z,1516410784.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:05.081Z,1516410785.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:05.096Z,1516410785.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:05.480Z,1516410785.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:05.499Z,1516410785.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:05.876Z,1516410785.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:05.890Z,1516410785.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:06.268Z,1516410786.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:06.286Z,1516410786.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:06.666Z,1516410786.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:06.688Z,1516410786.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:07.076Z,1516410787.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:07.090Z,1516410787.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:07.469Z,1516410787.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:07.486Z,1516410787.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:07.881Z,1516410787.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:07.896Z,1516410787.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:08.282Z,1516410788.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:08.296Z,1516410788.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:08.681Z,1516410788.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:08.695Z,1516410788.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:09.075Z,1516410789.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:09.089Z,1516410789.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:09.471Z,1516410789.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:09.485Z,1516410789.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:09.876Z,1516410789.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:09.890Z,1516410789.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:10.266Z,1516410790.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:10.288Z,1516410790.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:10.678Z,1516410790.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:10.692Z,1516410790.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:11.074Z,1516410791.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:11.101Z,1516410791.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:11.485Z,1516410791.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:11.499Z,1516410791.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:11.863Z,1516410791.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:11.889Z,1516410791.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:12.263Z,1516410792.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:12.294Z,1516410792.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:12.663Z,1516410792.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:12.688Z,1516410792.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:13.064Z,1516410793.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:13.090Z,1516410793.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:13.457Z,1516410793.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:13.479Z,1516410793.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:13.886Z,1516410793.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:13.900Z,1516410793.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:14.286Z,1516410794.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:14.300Z,1516410794.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:14.686Z,1516410794.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:14.700Z,1516410794.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:15.063Z,1516410795.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:15.094Z,1516410795.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:15.463Z,1516410795.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:15.499Z,1516410795.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:15.868Z,1516410795.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:15.894Z,1516410795.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:16.263Z,1516410796.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:16.294Z,1516410796.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:16.682Z,1516410796.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:16.701Z,1516410796.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:17.082Z,1516410797.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:17.099Z,1516410797.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:17.482Z,1516410797.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:17.496Z,1516410797.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:17.863Z,1516410797.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:17.900Z,1516410797.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:18.261Z,1516410798.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:18.275Z,1516410798.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:18.671Z,1516410798.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:18.707Z,1516410798.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:19.068Z,1516410799.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:19.083Z,1516410799.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:19.464Z,1516410799.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:19.478Z,1516410799.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:19.882Z,1516410799.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:19.905Z,1516410799.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:20.282Z,1516410800.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:20.305Z,1516410800.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:20.678Z,1516410800.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:20.708Z,1516410800.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:21.067Z,1516410801.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:21.087Z,1516410801.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:21.469Z,1516410801.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:21.483Z,1516410801.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:21.873Z,1516410801.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:21.887Z,1516410801.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:22.268Z,1516410802.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:22.287Z,1516410802.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:22.682Z,1516410802.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:22.713Z,1516410802.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:23.074Z,1516410803.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:23.088Z,1516410803.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:23.482Z,1516410803.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:23.512Z,1516410803.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:23.873Z,1516410803.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:23.891Z,1516410803.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:24.268Z,1516410804.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:24.287Z,1516410804.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:24.672Z,1516410804.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:24.691Z,1516410804.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:25.073Z,1516410805.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:25.095Z,1516410805.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:25.469Z,1516410805.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:25.483Z,1516410805.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:25.874Z,1516410805.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:25.888Z,1516410805.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:26.286Z,1516410806.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:26.300Z,1516410806.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:26.678Z,1516410806.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:26.692Z,1516410806.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:27.071Z,1516410807.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:27.085Z,1516410807.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:27.472Z,1516410807.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:27.486Z,1516410807.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:27.874Z,1516410807.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:27.888Z,1516410807.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:28.272Z,1516410808.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:28.286Z,1516410808.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:28.678Z,1516410808.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:28.692Z,1516410808.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:29.077Z,1516410809.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:29.099Z,1516410809.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:29.478Z,1516410809.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:29.492Z,1516410809.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:29.876Z,1516410809.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:29.891Z,1516410809.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:30.266Z,1516410810.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:30.296Z,1516410810.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:30.676Z,1516410810.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:30.690Z,1516410810.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:31.069Z,1516410811.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:31.100Z,1516410811.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:31.476Z,1516410811.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:31.495Z,1516410811.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:31.886Z,1516410811.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:31.903Z,1516410811.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:32.286Z,1516410812.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:32.301Z,1516410812.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:32.679Z,1516410812.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:32.693Z,1516410812.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:33.077Z,1516410813.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:33.091Z,1516410813.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:33.471Z,1516410813.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:33.491Z,1516410813.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:33.870Z,1516410813.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:33.898Z,1516410813.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:34.263Z,1516410814.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:34.291Z,1516410814.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:34.683Z,1516410814.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:34.698Z,1516410814.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:35.081Z,1516410815.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:35.096Z,1516410815.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:35.478Z,1516410815.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:35.505Z,1516410815.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:35.867Z,1516410815.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:35.894Z,1516410815.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:36.263Z,1516410816.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:36.288Z,1516410816.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:36.663Z,1516410816.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:36.688Z,1516410816.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:37.060Z,1516410817.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:37.096Z,1516410817.096 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:37.096Z,1516410817.096 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2018-01-20T01:13:37.096Z,1516410817.096 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:13:37.098Z,1516410817.098 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:37.098Z,1516410817.098 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2018-01-20T01:13:37.098Z,1516410817.098 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:13:37.100Z,1516410817.100 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:37.100Z,1516410817.100 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 81
2018-01-20T01:13:37.100Z,1516410817.100 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:13:37.112Z,1516410817.112 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:13:37.112Z,1516410817.112 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:13:37.113Z,1516410817.113 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:13:37.463Z,1516410817.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:37.504Z,1516410817.504 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:13:37.504Z,1516410817.504 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2018-01-20T01:13:37.505Z,1516410817.505 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:13:37.505Z,1516410817.505 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2018-01-20T01:13:37.506Z,1516410817.506 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:13:37.506Z,1516410817.506 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 81
2018-01-20T01:13:37.894Z,1516410817.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:37.907Z,1516410817.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:13:37.908Z,1516410817.908 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:13:37.908Z,1516410817.908 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:13:37.908Z,1516410817.908 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:13:37.909Z,1516410817.909 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:13:37.909Z,1516410817.909 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:13:37.909Z,1516410817.909 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:13:37.910Z,1516410817.910 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:13:37.910Z,1516410817.910 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:13:38.287Z,1516410818.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:38.306Z,1516410818.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:13:38.307Z,1516410818.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:38.674Z,1516410818.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:38.710Z,1516410818.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:13:38.711Z,1516410818.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:39.070Z,1516410819.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:39.084Z,1516410819.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:13:39.097Z,1516410819.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:39.471Z,1516410819.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:39.484Z,1516410819.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:13:39.485Z,1516410819.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:39.869Z,1516410819.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:39.883Z,1516410819.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:13:39.883Z,1516410819.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:40.269Z,1516410820.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:40.283Z,1516410820.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:13:40.284Z,1516410820.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:40.686Z,1516410820.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:40.714Z,1516410820.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:13:40.715Z,1516410820.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:41.082Z,1516410821.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:41.111Z,1516410821.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:13:41.112Z,1516410821.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:41.490Z,1516410821.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:41.518Z,1516410821.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:13:41.519Z,1516410821.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:44.572Z,1516410824.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:44.586Z,1516410824.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-01-20T01:13:44.586Z,1516410824.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:44.684Z,1516410824.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:44.711Z,1516410824.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:13:44.712Z,1516410824.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:45.086Z,1516410825.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:45.119Z,1516410825.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:13:45.120Z,1516410825.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:45.494Z,1516410825.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:45.520Z,1516410825.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:13:45.521Z,1516410825.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:45.886Z,1516410825.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:45.918Z,1516410825.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:13:45.919Z,1516410825.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:46.272Z,1516410826.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:46.286Z,1516410826.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:13:46.287Z,1516410826.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:46.675Z,1516410826.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:46.688Z,1516410826.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:13:46.689Z,1516410826.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:47.073Z,1516410827.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:47.091Z,1516410827.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:13:47.092Z,1516410827.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:47.472Z,1516410827.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:47.498Z,1516410827.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:13:47.499Z,1516410827.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:47.880Z,1516410827.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:47.965Z,1516410827.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:13:47.966Z,1516410827.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:48.292Z,1516410828.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:48.319Z,1516410828.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:13:48.320Z,1516410828.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:48.680Z,1516410828.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:48.710Z,1516410828.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:13:48.711Z,1516410828.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:49.071Z,1516410829.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:49.112Z,1516410829.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:13:49.113Z,1516410829.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:49.476Z,1516410829.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:49.507Z,1516410829.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:13:49.508Z,1516410829.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:49.870Z,1516410829.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:49.908Z,1516410829.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:13:49.917Z,1516410829.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:50.275Z,1516410830.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:50.311Z,1516410830.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:13:50.312Z,1516410830.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:50.682Z,1516410830.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:50.714Z,1516410830.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:13:50.715Z,1516410830.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:51.100Z,1516410831.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:51.114Z,1516410831.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:13:51.115Z,1516410831.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:51.486Z,1516410831.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:51.509Z,1516410831.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:13:51.510Z,1516410831.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:51.871Z,1516410831.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:51.890Z,1516410831.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:13:51.891Z,1516410831.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:52.277Z,1516410832.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:52.290Z,1516410832.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:13:52.291Z,1516410832.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:52.676Z,1516410832.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:52.689Z,1516410832.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:13:52.690Z,1516410832.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:53.077Z,1516410833.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:53.098Z,1516410833.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:13:53.099Z,1516410833.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:53.476Z,1516410833.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:53.490Z,1516410833.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:13:53.491Z,1516410833.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:53.894Z,1516410833.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:53.925Z,1516410833.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:13:53.926Z,1516410833.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:54.290Z,1516410834.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:54.304Z,1516410834.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:13:54.325Z,1516410834.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:54.690Z,1516410834.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:54.704Z,1516410834.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:13:54.725Z,1516410834.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:55.079Z,1516410835.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:55.093Z,1516410835.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:13:55.094Z,1516410835.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:55.481Z,1516410835.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:55.495Z,1516410835.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:13:55.496Z,1516410835.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:55.877Z,1516410835.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:55.891Z,1516410835.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:13:55.892Z,1516410835.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:56.280Z,1516410836.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:56.293Z,1516410836.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:13:56.294Z,1516410836.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:56.682Z,1516410836.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:56.696Z,1516410836.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:13:56.697Z,1516410836.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:57.082Z,1516410837.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:57.096Z,1516410837.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:57.482Z,1516410837.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:57.502Z,1516410837.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:57.878Z,1516410837.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:57.892Z,1516410837.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:58.280Z,1516410838.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:58.294Z,1516410838.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:58.685Z,1516410838.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:58.699Z,1516410838.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:59.083Z,1516410839.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:59.097Z,1516410839.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:59.482Z,1516410839.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:59.496Z,1516410839.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:13:59.880Z,1516410839.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:13:59.893Z,1516410839.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:00.282Z,1516410840.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:00.296Z,1516410840.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:00.682Z,1516410840.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:00.697Z,1516410840.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:01.081Z,1516410841.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:01.102Z,1516410841.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:01.482Z,1516410841.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:01.496Z,1516410841.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:01.881Z,1516410841.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:01.895Z,1516410841.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:02.283Z,1516410842.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:02.296Z,1516410842.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:02.682Z,1516410842.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:02.696Z,1516410842.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:03.086Z,1516410843.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:03.100Z,1516410843.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:03.484Z,1516410843.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:03.498Z,1516410843.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:03.883Z,1516410843.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:03.897Z,1516410843.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:04.286Z,1516410844.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:04.300Z,1516410844.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:04.690Z,1516410844.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:04.704Z,1516410844.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:05.091Z,1516410845.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:05.106Z,1516410845.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:05.491Z,1516410845.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:05.511Z,1516410845.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:05.883Z,1516410845.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:05.897Z,1516410845.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:06.279Z,1516410846.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:06.299Z,1516410846.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:06.691Z,1516410846.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:06.711Z,1516410846.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:07.092Z,1516410847.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:07.106Z,1516410847.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:07.488Z,1516410847.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:07.507Z,1516410847.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:07.877Z,1516410847.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:07.892Z,1516410847.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:08.263Z,1516410848.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:08.303Z,1516410848.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:08.693Z,1516410848.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:08.700Z,1516410848.700 [PNI_TCM](ERROR): CRC does not match. Expected:0x52431 got:0x62215
2018-01-20T01:14:08.738Z,1516410848.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:09.090Z,1516410849.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:09.104Z,1516410849.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:09.491Z,1516410849.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:09.504Z,1516410849.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:09.882Z,1516410849.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:09.898Z,1516410849.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:10.282Z,1516410850.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:10.300Z,1516410850.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:10.693Z,1516410850.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:10.706Z,1516410850.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:11.077Z,1516410851.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:11.099Z,1516410851.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:11.495Z,1516410851.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:11.515Z,1516410851.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:11.869Z,1516410851.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:11.900Z,1516410851.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:12.268Z,1516410852.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:12.295Z,1516410852.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:12.687Z,1516410852.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:12.707Z,1516410852.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:13.089Z,1516410853.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:13.104Z,1516410853.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:13.487Z,1516410853.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:13.507Z,1516410853.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:13.885Z,1516410853.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:13.899Z,1516410853.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:14.266Z,1516410854.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:14.296Z,1516410854.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:14.693Z,1516410854.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:14.708Z,1516410854.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:15.094Z,1516410855.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:15.108Z,1516410855.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:15.485Z,1516410855.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:15.500Z,1516410855.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:15.882Z,1516410855.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:15.896Z,1516410855.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:16.267Z,1516410856.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:16.311Z,1516410856.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:16.695Z,1516410856.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:16.708Z,1516410856.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:17.083Z,1516410857.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:17.109Z,1516410857.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:17.491Z,1516410857.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:17.505Z,1516410857.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:17.865Z,1516410857.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:17.903Z,1516410857.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:18.262Z,1516410858.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:18.276Z,1516410858.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:18.691Z,1516410858.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:18.710Z,1516410858.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:19.092Z,1516410859.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:19.106Z,1516410859.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:19.479Z,1516410859.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:19.511Z,1516410859.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:19.868Z,1516410859.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:19.905Z,1516410859.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:20.263Z,1516410860.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:20.306Z,1516410860.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:20.694Z,1516410860.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:20.708Z,1516410860.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:21.102Z,1516410861.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:21.118Z,1516410861.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:21.503Z,1516410861.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:21.516Z,1516410861.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:21.869Z,1516410861.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:21.907Z,1516410861.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:22.292Z,1516410862.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:22.307Z,1516410862.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:22.691Z,1516410862.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:22.719Z,1516410862.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:23.078Z,1516410863.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:23.112Z,1516410863.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:23.495Z,1516410863.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:23.511Z,1516410863.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:23.882Z,1516410863.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:23.906Z,1516410863.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:24.267Z,1516410864.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:24.305Z,1516410864.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:24.693Z,1516410864.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:24.710Z,1516410864.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:25.094Z,1516410865.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:25.108Z,1516410865.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:25.480Z,1516410865.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:25.500Z,1516410865.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:25.880Z,1516410865.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:25.923Z,1516410865.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:26.269Z,1516410866.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:26.283Z,1516410866.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:26.695Z,1516410866.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:26.710Z,1516410866.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:27.101Z,1516410867.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:27.115Z,1516410867.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:27.491Z,1516410867.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:27.518Z,1516410867.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:27.869Z,1516410867.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:27.883Z,1516410867.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:28.272Z,1516410868.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:28.287Z,1516410868.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:28.684Z,1516410868.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:28.712Z,1516410868.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:29.082Z,1516410869.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:29.114Z,1516410869.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:29.486Z,1516410869.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:29.513Z,1516410869.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:29.876Z,1516410869.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:29.891Z,1516410869.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:30.264Z,1516410870.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:30.279Z,1516410870.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:30.686Z,1516410870.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:30.709Z,1516410870.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:31.090Z,1516410871.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:31.118Z,1516410871.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:31.474Z,1516410871.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:31.488Z,1516410871.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:31.876Z,1516410871.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:31.894Z,1516410871.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:32.272Z,1516410872.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:32.286Z,1516410872.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:32.678Z,1516410872.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:32.692Z,1516410872.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:33.090Z,1516410873.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:33.120Z,1516410873.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:33.482Z,1516410873.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:33.517Z,1516410873.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:33.872Z,1516410873.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:33.887Z,1516410873.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:34.272Z,1516410874.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:34.291Z,1516410874.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:34.671Z,1516410874.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:34.684Z,1516410874.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:35.074Z,1516410875.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:35.090Z,1516410875.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:35.490Z,1516410875.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:35.526Z,1516410875.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:35.881Z,1516410875.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:35.895Z,1516410875.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:36.273Z,1516410876.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:36.291Z,1516410876.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:36.679Z,1516410876.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:36.696Z,1516410876.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:37.080Z,1516410877.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:37.093Z,1516410877.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:37.473Z,1516410877.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:37.487Z,1516410877.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:37.882Z,1516410877.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:37.897Z,1516410877.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:38.286Z,1516410878.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:38.304Z,1516410878.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:38.682Z,1516410878.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:38.697Z,1516410878.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:39.079Z,1516410879.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:39.093Z,1516410879.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:39.479Z,1516410879.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:39.493Z,1516410879.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:39.879Z,1516410879.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:39.902Z,1516410879.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:40.271Z,1516410880.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:40.294Z,1516410880.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:40.679Z,1516410880.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:40.693Z,1516410880.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:41.085Z,1516410881.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:41.099Z,1516410881.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:41.485Z,1516410881.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:41.502Z,1516410881.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:41.507Z,1516410881.507 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T01:09:41.4Z
2018-01-20T01:14:41.507Z,1516410881.507 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T01:14:41.507Z,1516410881.507 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T01:14:44.580Z,1516410884.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:44.595Z,1516410884.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:44.890Z,1516410884.890 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0100.lzma
2018-01-20T01:14:44.912Z,1516410884.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:44.940Z,1516410884.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:45.266Z,1516410885.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:45.288Z,1516410885.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:45.644Z,1516410885.644 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0100.lzma.bak
2018-01-20T01:14:45.644Z,1516410885.644 [DataOverHttps](INFO): SBD MOMSN=7725627
2018-01-20T01:14:45.680Z,1516410885.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:45.718Z,1516410885.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:46.173Z,1516410886.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:46.195Z,1516410886.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:46.464Z,1516410886.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:46.494Z,1516410886.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:49.583Z,1516410889.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:49.597Z,1516410889.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:49.706Z,1516410889.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:49.747Z,1516410889.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:50.062Z,1516410890.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:50.088Z,1516410890.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:50.456Z,1516410890.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:50.488Z,1516410890.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:50.846Z,1516410890.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:50.860Z,1516410890.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:51.252Z,1516410891.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:51.287Z,1516410891.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:54.344Z,1516410894.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:54.358Z,1516410894.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:54.440Z,1516410894.440 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180119T210901/Express0101.lzma
2018-01-20T01:14:54.485Z,1516410894.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:54.532Z,1516410894.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:54.836Z,1516410894.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:54.850Z,1516410894.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:55.190Z,1516410895.190 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0101.lzma.bak
2018-01-20T01:14:55.191Z,1516410895.191 [DataOverHttps](INFO): SBD MOMSN=7725629
2018-01-20T01:14:55.235Z,1516410895.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:55.267Z,1516410895.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:55.701Z,1516410895.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:55.716Z,1516410895.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:55.719Z,1516410895.719 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T01:14:55.719Z,1516410895.719 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T01:14:55.719Z,1516410895.719 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T01:14:56.013Z,1516410896.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:56.027Z,1516410896.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:59.122Z,1516410899.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:59.152Z,1516410899.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:59.258Z,1516410899.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:59.273Z,1516410899.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:14:59.622Z,1516410899.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:14:59.651Z,1516410899.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:00.022Z,1516410900.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:00.051Z,1516410900.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:00.405Z,1516410900.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:00.419Z,1516410900.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:00.804Z,1516410900.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:00.823Z,1516410900.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:01.208Z,1516410901.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:01.222Z,1516410901.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:01.604Z,1516410901.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:01.627Z,1516410901.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:02.014Z,1516410902.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:02.028Z,1516410902.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:02.422Z,1516410902.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:02.453Z,1516410902.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:02.814Z,1516410902.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:02.828Z,1516410902.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:03.206Z,1516410903.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:03.229Z,1516410903.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:03.612Z,1516410903.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:03.626Z,1516410903.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:04.012Z,1516410904.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:04.027Z,1516410904.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:04.411Z,1516410904.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:04.426Z,1516410904.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:04.814Z,1516410904.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:04.828Z,1516410904.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:05.212Z,1516410905.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:05.232Z,1516410905.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:05.614Z,1516410905.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:05.628Z,1516410905.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:06.012Z,1516410906.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:06.025Z,1516410906.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:06.405Z,1516410906.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:06.420Z,1516410906.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:06.811Z,1516410906.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:06.826Z,1516410906.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:07.210Z,1516410907.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:07.223Z,1516410907.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:07.612Z,1516410907.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:07.626Z,1516410907.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:08.014Z,1516410908.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:08.028Z,1516410908.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:08.418Z,1516410908.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:08.432Z,1516410908.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:08.814Z,1516410908.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:08.829Z,1516410908.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:09.213Z,1516410909.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:09.227Z,1516410909.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:09.613Z,1516410909.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:09.626Z,1516410909.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:10.006Z,1516410910.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:10.029Z,1516410910.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:10.406Z,1516410910.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:10.433Z,1516410910.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:10.823Z,1516410910.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:10.842Z,1516410910.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:11.216Z,1516410911.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:11.230Z,1516410911.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:11.619Z,1516410911.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:11.639Z,1516410911.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:12.014Z,1516410912.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:12.027Z,1516410912.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:12.402Z,1516410912.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:12.425Z,1516410912.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:12.811Z,1516410912.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:12.827Z,1516410912.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:13.209Z,1516410913.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:13.231Z,1516410913.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:13.611Z,1516410913.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:13.626Z,1516410913.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:14.021Z,1516410914.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:14.039Z,1516410914.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:14.421Z,1516410914.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:14.436Z,1516410914.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:14.818Z,1516410914.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:14.832Z,1516410914.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:15.202Z,1516410915.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:15.224Z,1516410915.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:15.608Z,1516410915.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:15.622Z,1516410915.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:16.012Z,1516410916.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:16.026Z,1516410916.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:16.415Z,1516410916.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:16.435Z,1516410916.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:16.822Z,1516410916.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:16.843Z,1516410916.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:17.210Z,1516410917.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:17.233Z,1516410917.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:17.622Z,1516410917.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:17.643Z,1516410917.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:18.012Z,1516410918.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:18.026Z,1516410918.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:18.397Z,1516410918.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:18.427Z,1516410918.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:18.815Z,1516410918.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:18.829Z,1516410918.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:19.198Z,1516410919.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:19.224Z,1516410919.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:19.603Z,1516410919.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:19.628Z,1516410919.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:20.018Z,1516410920.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:20.032Z,1516410920.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:20.418Z,1516410920.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:20.432Z,1516410920.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:20.825Z,1516410920.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:20.840Z,1516410920.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:21.203Z,1516410921.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:21.228Z,1516410921.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:21.599Z,1516410921.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:21.625Z,1516410921.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:22.015Z,1516410922.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:22.029Z,1516410922.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:22.402Z,1516410922.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:22.434Z,1516410922.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:22.823Z,1516410922.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:22.837Z,1516410922.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:23.218Z,1516410923.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:23.232Z,1516410923.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:23.618Z,1516410923.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:23.636Z,1516410923.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:24.002Z,1516410924.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:24.034Z,1516410924.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:24.399Z,1516410924.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:24.430Z,1516410924.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:24.826Z,1516410924.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:24.847Z,1516410924.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:25.227Z,1516410925.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:25.243Z,1516410925.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:25.626Z,1516410925.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:25.640Z,1516410925.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:26.001Z,1516410926.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:26.035Z,1516410926.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:26.403Z,1516410926.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:26.435Z,1516410926.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:26.824Z,1516410926.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:26.843Z,1516410926.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:27.226Z,1516410927.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:27.240Z,1516410927.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:27.627Z,1516410927.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:27.641Z,1516410927.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:28.004Z,1516410928.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:28.029Z,1516410928.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:28.400Z,1516410928.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:28.428Z,1516410928.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:28.819Z,1516410928.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:28.845Z,1516410928.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:29.206Z,1516410929.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:29.239Z,1516410929.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:29.622Z,1516410929.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:29.636Z,1516410929.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:30.000Z,1516410930.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:30.035Z,1516410930.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:30.394Z,1516410930.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:30.403Z,1516410930.403 [PNI_TCM](ERROR): CRC does not match. Expected:0x28338 got:0x5805
2018-01-20T01:15:30.446Z,1516410930.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:30.810Z,1516410930.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:30.835Z,1516410930.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:31.214Z,1516410931.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:31.251Z,1516410931.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:31.616Z,1516410931.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:31.639Z,1516410931.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:32.010Z,1516410932.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:32.040Z,1516410932.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:32.402Z,1516410932.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:32.416Z,1516410932.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:32.818Z,1516410932.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:32.841Z,1516410932.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:33.224Z,1516410933.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:33.318Z,1516410933.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:33.616Z,1516410933.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:33.647Z,1516410933.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:34.007Z,1516410934.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:34.046Z,1516410934.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:34.415Z,1516410934.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:34.444Z,1516410934.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:34.820Z,1516410934.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:34.845Z,1516410934.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:35.222Z,1516410935.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:35.251Z,1516410935.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:35.618Z,1516410935.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:35.641Z,1516410935.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:36.009Z,1516410936.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:36.044Z,1516410936.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:36.407Z,1516410936.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:36.447Z,1516410936.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:36.819Z,1516410936.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:36.835Z,1516410936.835 [PNI_TCM](ERROR): CRC does not match. Expected:0x29398 got:0x6593
2018-01-20T01:15:36.863Z,1516410936.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:37.215Z,1516410937.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:37.246Z,1516410937.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:37.622Z,1516410937.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:37.651Z,1516410937.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:38.008Z,1516410938.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:38.047Z,1516410938.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:38.406Z,1516410938.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:38.415Z,1516410938.415 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2018-01-20T01:15:38.454Z,1516410938.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:38.819Z,1516410938.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:38.847Z,1516410938.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:39.222Z,1516410939.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:39.251Z,1516410939.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:39.620Z,1516410939.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:39.647Z,1516410939.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:40.006Z,1516410940.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:40.046Z,1516410940.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:40.410Z,1516410940.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:40.417Z,1516410940.417 [PNI_TCM](ERROR): CRC does not match. Expected:0x27665 got:0x9991
2018-01-20T01:15:40.451Z,1516410940.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:40.822Z,1516410940.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:40.847Z,1516410940.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:41.223Z,1516410941.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:41.249Z,1516410941.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:41.621Z,1516410941.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:41.645Z,1516410941.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:42.011Z,1516410942.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:42.042Z,1516410942.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:42.410Z,1516410942.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:42.425Z,1516410942.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:42.815Z,1516410942.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:42.854Z,1516410942.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:43.225Z,1516410943.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:43.232Z,1516410943.232 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2018-01-20T01:15:43.252Z,1516410943.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:43.608Z,1516410943.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:43.624Z,1516410943.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:44.007Z,1516410944.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:44.022Z,1516410944.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:44.408Z,1516410944.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:44.449Z,1516410944.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:44.820Z,1516410944.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:44.848Z,1516410944.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:45.224Z,1516410945.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:45.259Z,1516410945.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:45.612Z,1516410945.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:45.626Z,1516410945.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:45.000Z,1516410946.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:46.046Z,1516410946.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:46.405Z,1516410946.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:46.430Z,1516410946.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:46.817Z,1516410946.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:46.831Z,1516410946.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:47.216Z,1516410947.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:47.235Z,1516410947.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:47.614Z,1516410947.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:47.652Z,1516410947.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:48.014Z,1516410948.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:48.032Z,1516410948.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:48.414Z,1516410948.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:48.430Z,1516410948.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:48.815Z,1516410948.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:48.837Z,1516410948.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:49.219Z,1516410949.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:49.261Z,1516410949.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:49.615Z,1516410949.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:49.633Z,1516410949.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:50.014Z,1516410950.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:50.034Z,1516410950.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:50.416Z,1516410950.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:50.429Z,1516410950.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:50.818Z,1516410950.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:50.857Z,1516410950.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:51.216Z,1516410951.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:51.239Z,1516410951.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:51.619Z,1516410951.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:51.636Z,1516410951.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:52.015Z,1516410952.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:52.031Z,1516410952.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:52.407Z,1516410952.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:52.441Z,1516410952.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:52.817Z,1516410952.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:52.837Z,1516410952.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:53.219Z,1516410953.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:53.236Z,1516410953.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:53.619Z,1516410953.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:53.633Z,1516410953.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:54.009Z,1516410954.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:54.035Z,1516410954.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:54.398Z,1516410954.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:54.420Z,1516410954.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:54.817Z,1516410954.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:54.835Z,1516410954.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:55.220Z,1516410955.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:55.234Z,1516410955.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:55.617Z,1516410955.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:55.659Z,1516410955.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:56.009Z,1516410956.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:56.023Z,1516410956.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:56.404Z,1516410956.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:56.423Z,1516410956.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:59.513Z,1516410959.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:59.528Z,1516410959.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:59.654Z,1516410959.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:15:59.668Z,1516410959.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:15:59.994Z,1516410959.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:00.039Z,1516410960.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:00.375Z,1516410960.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:00.394Z,1516410960.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:00.779Z,1516410960.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:00.815Z,1516410960.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:01.177Z,1516410961.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:01.191Z,1516410961.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:01.583Z,1516410961.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:01.627Z,1516410961.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:01.990Z,1516410961.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:02.020Z,1516410962.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:02.394Z,1516410962.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:02.432Z,1516410962.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:02.798Z,1516410962.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:02.829Z,1516410962.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:03.172Z,1516410963.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:03.198Z,1516410963.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:03.587Z,1516410963.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:03.601Z,1516410963.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:03.984Z,1516410963.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:03.999Z,1516410963.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:04.376Z,1516410964.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:04.402Z,1516410964.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:04.787Z,1516410964.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:04.807Z,1516410964.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:05.194Z,1516410965.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:05.208Z,1516410965.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:05.593Z,1516410965.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:05.607Z,1516410965.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:05.993Z,1516410965.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:06.007Z,1516410966.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:06.384Z,1516410966.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:06.398Z,1516410966.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:06.787Z,1516410966.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:06.802Z,1516410966.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:07.188Z,1516410967.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:07.202Z,1516410967.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:07.588Z,1516410967.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:07.602Z,1516410967.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:07.993Z,1516410967.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:08.015Z,1516410968.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:08.394Z,1516410968.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:08.408Z,1516410968.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:08.794Z,1516410968.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:08.808Z,1516410968.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:09.187Z,1516410969.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:09.207Z,1516410969.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:09.587Z,1516410969.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:09.607Z,1516410969.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:09.980Z,1516410969.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:10.002Z,1516410970.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:10.388Z,1516410970.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:10.402Z,1516410970.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:10.787Z,1516410970.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:10.807Z,1516410970.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:11.194Z,1516410971.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:11.208Z,1516410971.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:11.594Z,1516410971.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:11.608Z,1516410971.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:11.992Z,1516410971.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:12.011Z,1516410972.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:12.386Z,1516410972.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:12.400Z,1516410972.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:12.774Z,1516410972.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:12.805Z,1516410972.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:13.190Z,1516410973.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:13.211Z,1516410973.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:13.588Z,1516410973.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:13.603Z,1516410973.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:13.993Z,1516410973.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:14.007Z,1516410974.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:14.394Z,1516410974.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:14.408Z,1516410974.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:14.794Z,1516410974.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:14.815Z,1516410974.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:15.188Z,1516410975.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:15.203Z,1516410975.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:15.585Z,1516410975.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:15.599Z,1516410975.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:15.983Z,1516410975.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:16.003Z,1516410976.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:16.378Z,1516410976.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:16.401Z,1516410976.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:16.787Z,1516410976.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:16.802Z,1516410976.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:17.191Z,1516410977.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:17.205Z,1516410977.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:17.598Z,1516410977.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:17.612Z,1516410977.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:17.993Z,1516410977.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:18.015Z,1516410978.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:18.388Z,1516410978.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:18.402Z,1516410978.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:18.771Z,1516410978.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:18.802Z,1516410978.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:19.182Z,1516410979.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:19.201Z,1516410979.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:19.584Z,1516410979.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:19.602Z,1516410979.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:19.993Z,1516410979.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:20.008Z,1516410980.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:20.396Z,1516410980.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:20.415Z,1516410980.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:20.788Z,1516410980.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:20.802Z,1516410980.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:21.175Z,1516410981.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:21.200Z,1516410981.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:21.575Z,1516410981.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:21.607Z,1516410981.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:21.975Z,1516410981.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:22.007Z,1516410982.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:22.389Z,1516410982.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:22.403Z,1516410982.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:22.775Z,1516410982.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:22.810Z,1516410982.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:23.195Z,1516410983.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:23.209Z,1516410983.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:23.598Z,1516410983.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:23.612Z,1516410983.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:23.995Z,1516410983.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:24.009Z,1516410984.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:24.372Z,1516410984.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:24.410Z,1516410984.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:24.789Z,1516410984.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:24.803Z,1516410984.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:25.185Z,1516410985.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:25.206Z,1516410985.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:25.570Z,1516410985.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:25.605Z,1516410985.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:26.000Z,1516410986.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:26.019Z,1516410986.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:26.399Z,1516410986.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:26.413Z,1516410986.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:26.793Z,1516410986.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:26.819Z,1516410986.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:27.188Z,1516410987.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:27.203Z,1516410987.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:27.575Z,1516410987.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:27.611Z,1516410987.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:27.973Z,1516410987.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:28.010Z,1516410988.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:28.380Z,1516410988.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:28.406Z,1516410988.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:28.775Z,1516410988.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:28.800Z,1516410988.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:29.191Z,1516410989.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:29.205Z,1516410989.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:29.602Z,1516410989.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:29.616Z,1516410989.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:29.994Z,1516410989.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:30.008Z,1516410990.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:30.371Z,1516410990.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:30.403Z,1516410990.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:30.771Z,1516410990.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:30.802Z,1516410990.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:31.176Z,1516410991.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:31.206Z,1516410991.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:31.570Z,1516410991.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:31.607Z,1516410991.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:31.998Z,1516410991.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:32.019Z,1516410992.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:32.406Z,1516410992.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:32.420Z,1516410992.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:32.798Z,1516410992.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:32.812Z,1516410992.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:33.179Z,1516410993.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:33.204Z,1516410993.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:33.574Z,1516410993.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:33.599Z,1516410993.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:33.975Z,1516410993.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:34.006Z,1516410994.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:34.380Z,1516410994.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:34.405Z,1516410994.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:34.775Z,1516410994.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:34.800Z,1516410994.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:35.191Z,1516410995.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:35.205Z,1516410995.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:35.602Z,1516410995.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:35.616Z,1516410995.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:35.994Z,1516410995.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:36.008Z,1516410996.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:36.371Z,1516410996.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:36.403Z,1516410996.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:36.778Z,1516410996.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:36.803Z,1516410996.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:37.176Z,1516410997.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:37.201Z,1516410997.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:37.575Z,1516410997.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:37.603Z,1516410997.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:38.002Z,1516410998.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:38.023Z,1516410998.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:38.023Z,1516410998.023 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2018-01-20T01:16:38.023Z,1516410998.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:16:38.025Z,1516410998.025 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:38.025Z,1516410998.025 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2018-01-20T01:16:38.025Z,1516410998.025 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:16:38.027Z,1516410998.027 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:38.027Z,1516410998.027 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 82
2018-01-20T01:16:38.027Z,1516410998.027 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:16:38.075Z,1516410998.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:16:38.075Z,1516410998.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:16:38.075Z,1516410998.075 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:16:38.396Z,1516410998.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:38.421Z,1516410998.421 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:16:38.421Z,1516410998.421 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2018-01-20T01:16:38.422Z,1516410998.422 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:16:38.422Z,1516410998.422 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2018-01-20T01:16:38.422Z,1516410998.422 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:16:38.422Z,1516410998.422 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 82
2018-01-20T01:16:38.782Z,1516410998.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:38.814Z,1516410998.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:16:38.815Z,1516410998.815 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:16:38.815Z,1516410998.815 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:16:38.815Z,1516410998.815 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:16:38.816Z,1516410998.816 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:16:38.816Z,1516410998.816 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:16:38.816Z,1516410998.816 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:16:38.817Z,1516410998.817 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:16:38.817Z,1516410998.817 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:16:39.187Z,1516410999.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:39.214Z,1516410999.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:16:39.215Z,1516410999.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:39.583Z,1516410999.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:39.611Z,1516410999.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:16:39.612Z,1516410999.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:39.980Z,1516410999.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:40.011Z,1516411000.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:16:40.012Z,1516411000.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:40.384Z,1516411000.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:40.412Z,1516411000.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:16:40.413Z,1516411000.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:40.783Z,1516411000.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:40.811Z,1516411000.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:16:40.812Z,1516411000.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:41.200Z,1516411001.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:41.213Z,1516411001.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:16:41.214Z,1516411001.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:41.590Z,1516411001.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:41.618Z,1516411001.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:16:41.619Z,1516411001.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:41.000Z,1516411002.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:42.013Z,1516411002.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:16:42.014Z,1516411002.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:42.376Z,1516411002.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:42.414Z,1516411002.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:16:42.415Z,1516411002.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:42.777Z,1516411002.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:42.791Z,1516411002.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:16:42.792Z,1516411002.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:43.180Z,1516411003.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:43.194Z,1516411003.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:16:43.195Z,1516411003.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:43.583Z,1516411003.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:43.597Z,1516411003.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:16:43.597Z,1516411003.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:43.994Z,1516411003.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:44.023Z,1516411004.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:16:44.024Z,1516411004.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:44.394Z,1516411004.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:44.423Z,1516411004.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T01:16:44.424Z,1516411004.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:44.782Z,1516411004.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:44.802Z,1516411004.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:16:44.803Z,1516411004.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:45.180Z,1516411005.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:45.194Z,1516411005.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:16:45.195Z,1516411005.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:45.582Z,1516411005.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:45.595Z,1516411005.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:16:45.596Z,1516411005.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:45.984Z,1516411005.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:45.998Z,1516411005.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:16:45.999Z,1516411005.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:46.385Z,1516411006.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:46.399Z,1516411006.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:16:46.400Z,1516411006.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:46.780Z,1516411006.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:46.798Z,1516411006.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:16:46.799Z,1516411006.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:47.198Z,1516411007.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:47.221Z,1516411007.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:16:47.222Z,1516411007.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:47.598Z,1516411007.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:47.619Z,1516411007.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:16:47.620Z,1516411007.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:47.990Z,1516411007.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:48.004Z,1516411008.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:16:48.017Z,1516411008.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:48.384Z,1516411008.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:48.397Z,1516411008.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:16:48.398Z,1516411008.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:48.780Z,1516411008.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:48.798Z,1516411008.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:16:48.799Z,1516411008.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:49.182Z,1516411009.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:49.195Z,1516411009.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:16:49.196Z,1516411009.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:49.580Z,1516411009.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:49.593Z,1516411009.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:16:49.594Z,1516411009.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:49.998Z,1516411009.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:50.027Z,1516411010.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:16:50.028Z,1516411010.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:50.406Z,1516411010.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:50.434Z,1516411010.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:16:50.435Z,1516411010.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:50.790Z,1516411010.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:50.803Z,1516411010.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:16:50.804Z,1516411010.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:51.181Z,1516411011.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:51.195Z,1516411011.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:16:51.196Z,1516411011.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:51.582Z,1516411011.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:51.596Z,1516411011.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:16:51.597Z,1516411011.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:51.984Z,1516411011.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:51.997Z,1516411011.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:16:51.998Z,1516411011.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:52.382Z,1516411012.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:52.396Z,1516411012.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:16:52.397Z,1516411012.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:52.781Z,1516411012.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:52.803Z,1516411012.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:16:52.804Z,1516411012.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:53.198Z,1516411013.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:53.230Z,1516411013.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:16:53.231Z,1516411013.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:53.585Z,1516411013.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:53.599Z,1516411013.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:16:53.600Z,1516411013.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:53.998Z,1516411013.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:54.027Z,1516411014.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:16:54.028Z,1516411014.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:54.383Z,1516411014.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:54.397Z,1516411014.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:16:54.398Z,1516411014.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:54.779Z,1516411014.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:54.793Z,1516411014.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:16:54.794Z,1516411014.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:55.180Z,1516411015.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:55.218Z,1516411015.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:16:55.219Z,1516411015.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:55.588Z,1516411015.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:55.602Z,1516411015.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:16:55.603Z,1516411015.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:55.990Z,1516411015.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:56.005Z,1516411016.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:16:56.006Z,1516411016.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:56.390Z,1516411016.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:56.404Z,1516411016.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:16:56.405Z,1516411016.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:56.790Z,1516411016.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:56.803Z,1516411016.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:16:56.804Z,1516411016.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:16:59.894Z,1516411019.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:16:59.908Z,1516411019.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:00.016Z,1516411020.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:00.055Z,1516411020.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:00.394Z,1516411020.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:00.408Z,1516411020.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:00.806Z,1516411020.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:00.820Z,1516411020.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:01.198Z,1516411021.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:01.212Z,1516411021.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:01.591Z,1516411021.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:01.605Z,1516411021.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:01.994Z,1516411021.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:02.008Z,1516411022.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:02.387Z,1516411022.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:02.402Z,1516411022.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:02.798Z,1516411022.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:02.812Z,1516411022.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:03.198Z,1516411023.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:03.212Z,1516411023.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:03.598Z,1516411023.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:03.612Z,1516411023.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:03.993Z,1516411023.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:04.007Z,1516411024.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:04.378Z,1516411024.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:04.404Z,1516411024.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:04.794Z,1516411024.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:04.808Z,1516411024.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:05.190Z,1516411025.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:05.204Z,1516411025.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:05.585Z,1516411025.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:05.611Z,1516411025.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:06.003Z,1516411026.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:06.018Z,1516411026.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:06.403Z,1516411026.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:06.417Z,1516411026.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:06.804Z,1516411026.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:06.818Z,1516411026.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:07.179Z,1516411027.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:07.214Z,1516411027.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:07.579Z,1516411027.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:07.607Z,1516411027.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:07.993Z,1516411027.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:08.008Z,1516411028.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:08.379Z,1516411028.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:08.411Z,1516411028.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:08.793Z,1516411028.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:08.808Z,1516411028.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:09.198Z,1516411029.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:09.212Z,1516411029.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:09.594Z,1516411029.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:09.612Z,1516411029.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:09.983Z,1516411029.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:10.014Z,1516411030.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:10.373Z,1516411030.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:10.395Z,1516411030.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:10.783Z,1516411030.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:10.808Z,1516411030.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:11.176Z,1516411031.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:11.210Z,1516411031.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:11.573Z,1516411031.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:11.587Z,1516411031.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:11.990Z,1516411031.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:12.015Z,1516411032.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:12.402Z,1516411032.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:12.416Z,1516411032.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:12.789Z,1516411032.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:12.819Z,1516411032.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:13.181Z,1516411033.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:13.195Z,1516411033.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:13.583Z,1516411033.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:13.597Z,1516411033.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:13.988Z,1516411033.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:14.002Z,1516411034.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:14.387Z,1516411034.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:14.407Z,1516411034.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:14.798Z,1516411034.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:14.831Z,1516411034.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:15.185Z,1516411035.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:15.199Z,1516411035.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:15.602Z,1516411035.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:15.630Z,1516411035.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:15.986Z,1516411035.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:15.999Z,1516411035.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:16.383Z,1516411036.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:16.397Z,1516411036.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:16.788Z,1516411036.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:16.807Z,1516411036.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:17.185Z,1516411037.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:17.206Z,1516411037.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:17.582Z,1516411037.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:17.596Z,1516411037.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:18.002Z,1516411038.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:18.032Z,1516411038.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:18.398Z,1516411038.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:18.411Z,1516411038.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:18.790Z,1516411038.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:18.811Z,1516411038.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:19.187Z,1516411039.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:19.207Z,1516411039.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:19.588Z,1516411039.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:19.606Z,1516411039.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:19.986Z,1516411039.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:20.000Z,1516411040.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:20.385Z,1516411040.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:20.403Z,1516411040.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:20.788Z,1516411040.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:20.802Z,1516411040.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:21.190Z,1516411041.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:21.204Z,1516411041.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:21.602Z,1516411041.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:21.632Z,1516411041.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:21.988Z,1516411041.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:22.006Z,1516411042.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:22.382Z,1516411042.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:22.396Z,1516411042.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:22.788Z,1516411042.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:22.807Z,1516411042.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:23.189Z,1516411043.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:23.203Z,1516411043.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:23.586Z,1516411043.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:23.600Z,1516411043.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:24.002Z,1516411044.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:24.031Z,1516411044.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:24.394Z,1516411044.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:24.432Z,1516411044.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:24.789Z,1516411044.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:24.803Z,1516411044.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:25.185Z,1516411045.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:25.203Z,1516411045.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:25.588Z,1516411045.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:25.602Z,1516411045.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:25.989Z,1516411045.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:26.004Z,1516411046.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:26.387Z,1516411046.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:26.407Z,1516411046.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:26.802Z,1516411046.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:26.831Z,1516411046.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:27.189Z,1516411047.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:27.203Z,1516411047.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:27.590Z,1516411047.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:27.604Z,1516411047.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:27.988Z,1516411047.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:28.002Z,1516411048.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:28.386Z,1516411048.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:28.401Z,1516411048.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:28.789Z,1516411048.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:28.803Z,1516411048.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:29.189Z,1516411049.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:29.203Z,1516411049.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:29.583Z,1516411049.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:29.597Z,1516411049.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:30.002Z,1516411050.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:30.032Z,1516411050.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:30.402Z,1516411050.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:30.433Z,1516411050.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:30.791Z,1516411050.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:30.805Z,1516411050.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:31.193Z,1516411051.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:31.207Z,1516411051.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:31.590Z,1516411051.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:31.603Z,1516411051.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:31.991Z,1516411051.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:32.005Z,1516411052.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:32.386Z,1516411052.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:32.408Z,1516411052.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:32.795Z,1516411052.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:32.809Z,1516411052.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:33.194Z,1516411053.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:33.208Z,1516411053.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:33.593Z,1516411053.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:33.607Z,1516411053.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:33.991Z,1516411053.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:34.005Z,1516411054.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:34.385Z,1516411054.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:34.400Z,1516411054.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:34.783Z,1516411054.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:34.807Z,1516411054.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:35.192Z,1516411055.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:35.206Z,1516411055.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:35.577Z,1516411055.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:35.603Z,1516411055.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:36.015Z,1516411056.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:36.045Z,1516411056.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:36.401Z,1516411056.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:36.419Z,1516411056.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:36.802Z,1516411056.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:36.816Z,1516411056.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:37.191Z,1516411057.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:37.211Z,1516411057.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:37.575Z,1516411057.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:37.606Z,1516411057.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:37.986Z,1516411057.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:38.004Z,1516411058.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:38.382Z,1516411058.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:38.404Z,1516411058.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:38.798Z,1516411058.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:38.818Z,1516411058.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:39.195Z,1516411059.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:39.209Z,1516411059.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:39.598Z,1516411059.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:39.612Z,1516411059.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:39.992Z,1516411059.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:40.006Z,1516411060.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:40.373Z,1516411060.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:40.408Z,1516411060.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:40.789Z,1516411060.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:40.803Z,1516411060.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:41.189Z,1516411061.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:41.203Z,1516411061.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:41.576Z,1516411061.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:41.603Z,1516411061.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:41.997Z,1516411061.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:42.027Z,1516411062.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:42.405Z,1516411062.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:42.419Z,1516411062.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:42.804Z,1516411062.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:42.819Z,1516411062.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:43.180Z,1516411063.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:43.207Z,1516411063.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:43.580Z,1516411063.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:43.612Z,1516411063.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:43.994Z,1516411063.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:44.008Z,1516411064.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:44.375Z,1516411064.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:44.408Z,1516411064.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:44.803Z,1516411064.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:44.817Z,1516411064.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:45.198Z,1516411065.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:45.212Z,1516411065.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:45.599Z,1516411065.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:45.613Z,1516411065.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:45.979Z,1516411065.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:46.007Z,1516411066.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:46.377Z,1516411066.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:46.415Z,1516411066.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:46.783Z,1516411066.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:46.808Z,1516411066.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:47.176Z,1516411067.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:47.226Z,1516411067.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:47.573Z,1516411067.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:47.587Z,1516411067.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:48.002Z,1516411068.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:48.017Z,1516411068.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:48.403Z,1516411068.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:48.416Z,1516411068.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:48.803Z,1516411068.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:48.818Z,1516411068.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:49.179Z,1516411069.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:49.209Z,1516411069.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:49.583Z,1516411069.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:49.621Z,1516411069.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:49.984Z,1516411069.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:50.018Z,1516411070.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:50.383Z,1516411070.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:50.419Z,1516411070.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:50.798Z,1516411070.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:50.827Z,1516411070.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:51.186Z,1516411071.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:51.200Z,1516411071.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:51.598Z,1516411071.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:51.621Z,1516411071.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:51.987Z,1516411071.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:52.027Z,1516411072.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:52.380Z,1516411072.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:52.394Z,1516411072.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:52.784Z,1516411072.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:52.803Z,1516411072.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:53.188Z,1516411073.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:53.203Z,1516411073.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:53.580Z,1516411073.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:53.594Z,1516411073.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:53.998Z,1516411073.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:54.028Z,1516411074.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:54.398Z,1516411074.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:54.430Z,1516411074.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:54.797Z,1516411074.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:54.811Z,1516411074.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:55.188Z,1516411075.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:55.207Z,1516411075.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:55.588Z,1516411075.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:55.607Z,1516411075.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:55.989Z,1516411075.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:56.003Z,1516411076.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:56.389Z,1516411076.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:56.403Z,1516411076.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:56.802Z,1516411076.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:56.816Z,1516411076.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:17:59.898Z,1516411079.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:17:59.912Z,1516411079.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:00.036Z,1516411080.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:00.067Z,1516411080.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:00.390Z,1516411080.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:00.404Z,1516411080.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:00.793Z,1516411080.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:00.807Z,1516411080.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:01.178Z,1516411081.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:01.198Z,1516411081.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:01.592Z,1516411081.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:01.611Z,1516411081.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:01.998Z,1516411081.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:02.011Z,1516411082.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:02.390Z,1516411082.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:02.412Z,1516411082.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:02.792Z,1516411082.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:02.806Z,1516411082.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:03.188Z,1516411083.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:03.201Z,1516411083.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:03.597Z,1516411083.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:03.611Z,1516411083.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:03.998Z,1516411083.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:04.012Z,1516411084.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:04.397Z,1516411084.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:04.411Z,1516411084.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:04.773Z,1516411084.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:04.803Z,1516411084.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:05.192Z,1516411085.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:05.206Z,1516411085.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:05.575Z,1516411085.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:05.601Z,1516411085.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:06.002Z,1516411086.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:06.016Z,1516411086.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:06.402Z,1516411086.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:06.416Z,1516411086.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:06.789Z,1516411086.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:06.823Z,1516411086.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:07.175Z,1516411087.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:07.211Z,1516411087.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:07.583Z,1516411087.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:07.608Z,1516411087.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:07.981Z,1516411087.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:08.012Z,1516411088.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:08.378Z,1516411088.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:08.411Z,1516411088.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:08.802Z,1516411088.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:08.817Z,1516411088.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:09.207Z,1516411089.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:09.220Z,1516411089.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:09.591Z,1516411089.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:09.627Z,1516411089.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:09.984Z,1516411089.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:10.014Z,1516411090.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:10.383Z,1516411090.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:10.415Z,1516411090.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:10.783Z,1516411090.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:10.816Z,1516411090.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:11.180Z,1516411091.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:11.206Z,1516411091.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:11.575Z,1516411091.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:11.594Z,1516411091.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:11.994Z,1516411091.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:12.021Z,1516411092.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:12.410Z,1516411092.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:12.431Z,1516411092.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:12.798Z,1516411092.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:12.830Z,1516411092.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:13.175Z,1516411093.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:13.189Z,1516411093.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:13.587Z,1516411093.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:13.622Z,1516411093.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:13.980Z,1516411093.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:13.994Z,1516411093.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:14.380Z,1516411094.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:14.395Z,1516411094.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:14.798Z,1516411094.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:14.821Z,1516411094.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:15.198Z,1516411095.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:15.221Z,1516411095.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:15.594Z,1516411095.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:15.624Z,1516411095.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:15.987Z,1516411095.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:16.007Z,1516411096.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:16.385Z,1516411096.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:16.398Z,1516411096.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:16.785Z,1516411096.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:16.799Z,1516411096.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:17.186Z,1516411097.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:17.200Z,1516411097.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:17.586Z,1516411097.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:17.600Z,1516411097.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:18.000Z,1516411098.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:18.023Z,1516411098.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:18.404Z,1516411098.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:18.418Z,1516411098.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:18.797Z,1516411098.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:18.856Z,1516411098.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:19.179Z,1516411099.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:19.217Z,1516411099.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:19.580Z,1516411099.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:19.620Z,1516411099.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:19.988Z,1516411099.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:20.035Z,1516411100.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:20.391Z,1516411100.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:20.431Z,1516411100.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:20.792Z,1516411100.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:20.826Z,1516411100.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:21.196Z,1516411101.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:21.250Z,1516411101.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:21.593Z,1516411101.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:21.630Z,1516411101.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:21.986Z,1516411101.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:22.023Z,1516411102.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:22.381Z,1516411102.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:22.442Z,1516411102.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:22.781Z,1516411102.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:22.824Z,1516411102.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:23.182Z,1516411103.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:23.200Z,1516411103.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:23.587Z,1516411103.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:23.637Z,1516411103.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:24.026Z,1516411104.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:24.050Z,1516411104.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:24.408Z,1516411104.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:24.452Z,1516411104.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:24.807Z,1516411104.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:24.843Z,1516411104.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:25.190Z,1516411105.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:25.221Z,1516411105.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:25.585Z,1516411105.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:25.619Z,1516411105.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:25.994Z,1516411105.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:26.051Z,1516411106.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:26.381Z,1516411106.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:26.428Z,1516411106.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:26.823Z,1516411106.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:26.882Z,1516411106.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:27.249Z,1516411107.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:27.306Z,1516411107.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:27.596Z,1516411107.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:27.627Z,1516411107.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:27.994Z,1516411107.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:28.045Z,1516411108.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:28.387Z,1516411108.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:28.450Z,1516411108.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:28.789Z,1516411108.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:28.851Z,1516411108.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:29.191Z,1516411109.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:29.251Z,1516411109.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:29.591Z,1516411109.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:29.640Z,1516411109.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:29.999Z,1516411109.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:30.019Z,1516411110.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:30.403Z,1516411110.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:30.431Z,1516411110.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:30.800Z,1516411110.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:30.855Z,1516411110.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:31.181Z,1516411111.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:31.216Z,1516411111.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:31.581Z,1516411111.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:31.621Z,1516411111.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:32.008Z,1516411112.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:32.062Z,1516411112.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:32.381Z,1516411112.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:32.415Z,1516411112.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:32.817Z,1516411112.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:32.848Z,1516411112.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:33.223Z,1516411113.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:33.275Z,1516411113.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:33.591Z,1516411113.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:33.635Z,1516411113.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:34.024Z,1516411114.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:34.095Z,1516411114.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:34.390Z,1516411114.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:34.408Z,1516411114.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:34.790Z,1516411114.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:34.816Z,1516411114.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:35.190Z,1516411115.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:35.208Z,1516411115.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:35.597Z,1516411115.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:35.611Z,1516411115.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:35.996Z,1516411115.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:36.015Z,1516411116.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:36.398Z,1516411116.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:36.412Z,1516411116.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:36.815Z,1516411116.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:36.842Z,1516411116.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:37.185Z,1516411117.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:37.199Z,1516411117.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:37.585Z,1516411117.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:37.611Z,1516411117.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:37.990Z,1516411117.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:38.010Z,1516411118.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:38.375Z,1516411118.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:38.407Z,1516411118.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:38.798Z,1516411118.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:38.812Z,1516411118.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:39.202Z,1516411119.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:39.217Z,1516411119.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:39.594Z,1516411119.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:39.608Z,1516411119.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:39.979Z,1516411119.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:40.010Z,1516411120.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:40.392Z,1516411120.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:40.411Z,1516411120.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:40.775Z,1516411120.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:40.800Z,1516411120.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:41.180Z,1516411121.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:41.210Z,1516411121.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:41.580Z,1516411121.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:41.615Z,1516411121.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:42.002Z,1516411122.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:42.016Z,1516411122.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:42.402Z,1516411122.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:42.416Z,1516411122.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:42.811Z,1516411122.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:42.825Z,1516411122.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:43.175Z,1516411123.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:43.206Z,1516411123.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:43.583Z,1516411123.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:43.614Z,1516411123.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:43.981Z,1516411123.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:44.011Z,1516411124.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:44.383Z,1516411124.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:44.418Z,1516411124.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:44.794Z,1516411124.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:44.820Z,1516411124.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:45.194Z,1516411125.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:45.221Z,1516411125.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:45.594Z,1516411125.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:45.627Z,1516411125.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:45.980Z,1516411125.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:45.994Z,1516411125.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:46.384Z,1516411126.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:46.399Z,1516411126.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:46.784Z,1516411126.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:46.803Z,1516411126.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:47.185Z,1516411127.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:47.199Z,1516411127.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:47.588Z,1516411127.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:47.602Z,1516411127.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:47.986Z,1516411127.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:48.002Z,1516411128.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:48.403Z,1516411128.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:48.425Z,1516411128.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:48.794Z,1516411128.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:48.817Z,1516411128.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:49.188Z,1516411129.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:49.207Z,1516411129.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:49.588Z,1516411129.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:49.608Z,1516411129.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:49.989Z,1516411129.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:50.003Z,1516411130.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:50.387Z,1516411130.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:50.407Z,1516411130.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:50.802Z,1516411130.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:50.832Z,1516411130.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:51.190Z,1516411131.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:51.204Z,1516411131.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:51.602Z,1516411131.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:51.631Z,1516411131.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:51.987Z,1516411131.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:52.007Z,1516411132.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:52.389Z,1516411132.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:52.402Z,1516411132.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:52.789Z,1516411132.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:52.803Z,1516411132.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:53.190Z,1516411133.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:53.204Z,1516411133.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:53.585Z,1516411133.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:53.606Z,1516411133.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:54.002Z,1516411134.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:54.016Z,1516411134.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:54.394Z,1516411134.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:54.408Z,1516411134.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:54.794Z,1516411134.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:54.808Z,1516411134.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:55.187Z,1516411135.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:55.206Z,1516411135.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:55.592Z,1516411135.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:55.606Z,1516411135.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:55.991Z,1516411135.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:56.005Z,1516411136.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:56.392Z,1516411136.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:56.411Z,1516411136.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:56.795Z,1516411136.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:56.809Z,1516411136.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:18:57.194Z,1516411137.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:18:57.214Z,1516411137.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:00.302Z,1516411140.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:00.318Z,1516411140.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:00.433Z,1516411140.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:00.447Z,1516411140.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:00.805Z,1516411140.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:00.820Z,1516411140.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:01.208Z,1516411141.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:01.224Z,1516411141.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:01.611Z,1516411141.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:01.628Z,1516411141.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:02.018Z,1516411142.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:02.053Z,1516411142.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:02.422Z,1516411142.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:02.453Z,1516411142.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:02.814Z,1516411142.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:02.828Z,1516411142.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:03.212Z,1516411143.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:03.225Z,1516411143.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:03.611Z,1516411143.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:03.631Z,1516411143.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:04.008Z,1516411144.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:04.022Z,1516411144.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:04.404Z,1516411144.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:04.417Z,1516411144.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:04.814Z,1516411144.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:04.828Z,1516411144.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:05.218Z,1516411145.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:05.232Z,1516411145.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:05.614Z,1516411145.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:05.634Z,1516411145.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:06.011Z,1516411146.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:06.031Z,1516411146.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:06.409Z,1516411146.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:06.423Z,1516411146.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:06.804Z,1516411146.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:06.818Z,1516411146.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:07.202Z,1516411147.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:07.228Z,1516411147.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:07.611Z,1516411147.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:07.626Z,1516411147.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:08.015Z,1516411148.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:08.029Z,1516411148.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:08.420Z,1516411148.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:08.439Z,1516411148.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:08.817Z,1516411148.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:08.839Z,1516411148.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:09.212Z,1516411149.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:09.225Z,1516411149.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:09.612Z,1516411149.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:09.626Z,1516411149.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:10.006Z,1516411150.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:10.025Z,1516411150.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:10.395Z,1516411150.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:10.430Z,1516411150.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:10.821Z,1516411150.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:10.835Z,1516411150.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:11.220Z,1516411151.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:11.239Z,1516411151.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:11.622Z,1516411151.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:11.642Z,1516411151.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:12.011Z,1516411152.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:12.031Z,1516411152.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:12.402Z,1516411152.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:12.424Z,1516411152.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:12.795Z,1516411152.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:12.821Z,1516411152.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:13.206Z,1516411153.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:13.233Z,1516411153.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:13.603Z,1516411153.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:13.628Z,1516411153.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:14.006Z,1516411154.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:14.033Z,1516411154.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:14.426Z,1516411154.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:14.440Z,1516411154.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:14.818Z,1516411154.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:14.832Z,1516411154.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:15.195Z,1516411155.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:15.231Z,1516411155.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:15.603Z,1516411155.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:15.628Z,1516411155.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:16.000Z,1516411156.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:16.031Z,1516411156.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:16.056Z,1516411156.056 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T01:19:16.403Z,1516411156.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:16.436Z,1516411156.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:16.822Z,1516411156.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:16.836Z,1516411156.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:17.222Z,1516411157.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:17.236Z,1516411157.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:17.606Z,1516411157.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:17.638Z,1516411157.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:18.003Z,1516411158.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:18.034Z,1516411158.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:18.403Z,1516411158.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:18.434Z,1516411158.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:18.803Z,1516411158.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:18.843Z,1516411158.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:19.204Z,1516411159.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:19.235Z,1516411159.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:19.603Z,1516411159.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:19.618Z,1516411159.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:20.018Z,1516411160.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:20.043Z,1516411160.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:20.422Z,1516411160.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:20.451Z,1516411160.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:20.818Z,1516411160.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:20.841Z,1516411160.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:21.207Z,1516411161.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:21.221Z,1516411161.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:21.601Z,1516411161.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:21.615Z,1516411161.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:22.008Z,1516411162.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:22.022Z,1516411162.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:22.406Z,1516411162.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:22.420Z,1516411162.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:22.814Z,1516411162.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:22.828Z,1516411162.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:23.222Z,1516411163.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:23.267Z,1516411163.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:23.615Z,1516411163.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:23.629Z,1516411163.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:24.012Z,1516411164.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:24.026Z,1516411164.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:24.411Z,1516411164.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:24.426Z,1516411164.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:24.810Z,1516411164.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:24.824Z,1516411164.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:25.204Z,1516411165.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:25.222Z,1516411165.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:25.614Z,1516411165.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:25.628Z,1516411165.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:26.016Z,1516411166.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:26.030Z,1516411166.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:26.413Z,1516411166.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:26.427Z,1516411166.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:26.815Z,1516411166.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:26.829Z,1516411166.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:27.213Z,1516411167.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:27.226Z,1516411167.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:27.607Z,1516411167.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:27.627Z,1516411167.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:28.012Z,1516411168.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:28.027Z,1516411168.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:28.412Z,1516411168.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:28.426Z,1516411168.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:28.814Z,1516411168.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:28.829Z,1516411168.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:29.214Z,1516411169.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:29.229Z,1516411169.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:29.624Z,1516411169.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:29.651Z,1516411169.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:30.011Z,1516411170.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:30.031Z,1516411170.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:30.412Z,1516411170.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:30.426Z,1516411170.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:30.809Z,1516411170.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:30.822Z,1516411170.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:31.211Z,1516411171.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:31.231Z,1516411171.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:31.610Z,1516411171.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:31.624Z,1516411171.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:32.014Z,1516411172.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:32.028Z,1516411172.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:32.413Z,1516411172.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:32.427Z,1516411172.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:32.813Z,1516411172.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:32.835Z,1516411172.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:33.212Z,1516411173.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:33.226Z,1516411173.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:33.604Z,1516411173.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:33.630Z,1516411173.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:34.013Z,1516411174.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:34.027Z,1516411174.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:34.410Z,1516411174.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:34.423Z,1516411174.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:34.811Z,1516411174.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:34.837Z,1516411174.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:35.221Z,1516411175.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:35.235Z,1516411175.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:35.623Z,1516411175.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:35.636Z,1516411175.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:36.010Z,1516411176.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:36.024Z,1516411176.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:36.404Z,1516411176.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:36.427Z,1516411176.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:36.817Z,1516411176.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:36.830Z,1516411176.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:37.214Z,1516411177.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:37.228Z,1516411177.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:37.614Z,1516411177.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:37.628Z,1516411177.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:38.020Z,1516411178.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:38.034Z,1516411178.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:38.418Z,1516411178.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:38.451Z,1516411178.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:38.821Z,1516411178.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:38.843Z,1516411178.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:38.843Z,1516411178.843 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2018-01-20T01:19:38.843Z,1516411178.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:19:38.861Z,1516411178.861 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:38.861Z,1516411178.861 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2018-01-20T01:19:38.861Z,1516411178.861 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:19:38.863Z,1516411178.863 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:38.863Z,1516411178.863 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 83
2018-01-20T01:19:38.863Z,1516411178.863 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:19:38.895Z,1516411178.895 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:19:38.895Z,1516411178.895 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:19:38.896Z,1516411178.896 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:19:39.200Z,1516411179.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:39.238Z,1516411179.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:19:39.238Z,1516411179.238 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2018-01-20T01:19:39.238Z,1516411179.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:19:39.238Z,1516411179.238 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2018-01-20T01:19:39.239Z,1516411179.239 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:19:39.239Z,1516411179.239 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 83
2018-01-20T01:19:39.597Z,1516411179.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:39.619Z,1516411179.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:19:39.619Z,1516411179.619 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:19:39.619Z,1516411179.619 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:19:39.620Z,1516411179.620 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:19:39.620Z,1516411179.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:19:39.625Z,1516411179.625 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:19:39.625Z,1516411179.625 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:19:39.626Z,1516411179.626 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:19:39.626Z,1516411179.626 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:19:40.002Z,1516411180.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:40.027Z,1516411180.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:19:40.028Z,1516411180.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:40.398Z,1516411180.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:40.438Z,1516411180.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:19:40.439Z,1516411180.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:40.822Z,1516411180.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:40.836Z,1516411180.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:19:40.837Z,1516411180.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:41.222Z,1516411181.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:41.236Z,1516411181.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:19:41.237Z,1516411181.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:41.608Z,1516411181.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:41.650Z,1516411181.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:19:41.651Z,1516411181.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:42.005Z,1516411182.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:42.030Z,1516411182.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:19:42.031Z,1516411182.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:42.407Z,1516411182.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:42.432Z,1516411182.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:19:42.433Z,1516411182.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:42.799Z,1516411182.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:42.831Z,1516411182.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:19:42.832Z,1516411182.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:43.207Z,1516411183.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:43.231Z,1516411183.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:19:43.232Z,1516411183.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:43.601Z,1516411183.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:43.631Z,1516411183.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:19:43.632Z,1516411183.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:44.023Z,1516411184.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:44.037Z,1516411184.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:19:44.038Z,1516411184.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:44.406Z,1516411184.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:44.431Z,1516411184.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:19:44.432Z,1516411184.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:44.812Z,1516411184.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:44.842Z,1516411184.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:19:44.843Z,1516411184.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:45.206Z,1516411185.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:45.231Z,1516411185.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T01:19:45.232Z,1516411185.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:45.595Z,1516411185.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:45.609Z,1516411185.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:19:45.610Z,1516411185.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:46.004Z,1516411186.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:46.034Z,1516411186.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:19:46.035Z,1516411186.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:46.406Z,1516411186.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:46.420Z,1516411186.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:19:46.447Z,1516411186.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:46.808Z,1516411186.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:46.839Z,1516411186.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:19:46.840Z,1516411186.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:47.222Z,1516411187.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:47.250Z,1516411187.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:19:47.251Z,1516411187.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:47.618Z,1516411187.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:47.641Z,1516411187.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:19:47.642Z,1516411187.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:48.001Z,1516411188.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:48.018Z,1516411188.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:19:48.019Z,1516411188.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:48.409Z,1516411188.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:48.422Z,1516411188.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:19:48.423Z,1516411188.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:48.808Z,1516411188.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:48.822Z,1516411188.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:19:48.822Z,1516411188.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:49.203Z,1516411189.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:49.217Z,1516411189.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:19:49.218Z,1516411189.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:49.606Z,1516411189.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:49.622Z,1516411189.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:19:49.623Z,1516411189.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:50.022Z,1516411190.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:50.053Z,1516411190.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:19:50.054Z,1516411190.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:50.408Z,1516411190.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:50.426Z,1516411190.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:19:50.427Z,1516411190.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:50.822Z,1516411190.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:50.852Z,1516411190.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:19:50.852Z,1516411190.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:51.208Z,1516411191.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:51.224Z,1516411191.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:19:51.225Z,1516411191.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:51.604Z,1516411191.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:51.631Z,1516411191.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:19:51.632Z,1516411191.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:52.013Z,1516411192.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:52.034Z,1516411192.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:19:52.035Z,1516411192.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:52.412Z,1516411192.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:52.425Z,1516411192.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:19:52.426Z,1516411192.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:52.817Z,1516411192.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:52.831Z,1516411192.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:19:52.832Z,1516411192.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:53.216Z,1516411193.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:53.234Z,1516411193.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:19:53.235Z,1516411193.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:53.618Z,1516411193.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:53.631Z,1516411193.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:19:53.632Z,1516411193.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:54.012Z,1516411194.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:54.025Z,1516411194.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:19:54.026Z,1516411194.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:54.412Z,1516411194.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:54.428Z,1516411194.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:19:54.429Z,1516411194.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:54.811Z,1516411194.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:54.824Z,1516411194.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:19:54.825Z,1516411194.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:55.214Z,1516411195.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:55.228Z,1516411195.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:19:55.229Z,1516411195.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:55.608Z,1516411195.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:55.627Z,1516411195.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:19:55.628Z,1516411195.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:56.015Z,1516411196.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:56.031Z,1516411196.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:19:56.032Z,1516411196.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:56.414Z,1516411196.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:56.434Z,1516411196.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:19:56.435Z,1516411196.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:56.438Z,1516411196.438 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T01:19:56.438Z,1516411196.438 [Default:CheckIn:C.Wait] Stopped
2018-01-20T01:19:56.438Z,1516411196.438 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T01:19:56.439Z,1516411196.439 [Default:CheckIn:D] Running Loop=1
2018-01-20T01:19:56.820Z,1516411196.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:56.834Z,1516411196.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:19:56.835Z,1516411196.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:56.839Z,1516411196.839 [Default:CheckIn:D] Stopped
2018-01-20T01:19:56.839Z,1516411196.839 [Default:CheckIn:E] Running Loop=1
2018-01-20T01:19:57.206Z,1516411197.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:19:57.230Z,1516411197.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:19:57.231Z,1516411197.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:19:57.235Z,1516411197.235 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.546232 min 
2018-01-20T01:19:57.235Z,1516411197.235 [Default:CheckIn:E] Stopped
2018-01-20T01:19:57.235Z,1516411197.235 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T01:19:57.235Z,1516411197.235 [Default:CheckIn] Stopped
2018-01-20T01:19:57.235Z,1516411197.235 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T01:19:57.235Z,1516411197.235 [Default:CheckIn](INFO): Running loop #4
2018-01-20T01:19:57.235Z,1516411197.235 [Default:CheckIn] Running Loop=4
2018-01-20T01:19:57.235Z,1516411197.235 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T01:19:57.236Z,1516411197.236 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T01:20:00.311Z,1516411200.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:00.325Z,1516411200.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:00.428Z,1516411200.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:00.447Z,1516411200.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:00.794Z,1516411200.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:00.830Z,1516411200.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:01.198Z,1516411201.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:01.224Z,1516411201.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:01.578Z,1516411201.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:01.592Z,1516411201.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:01.984Z,1516411201.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:02.018Z,1516411202.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:02.382Z,1516411202.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:02.396Z,1516411202.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:02.794Z,1516411202.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:02.828Z,1516411202.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:03.194Z,1516411203.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:03.229Z,1516411203.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:03.595Z,1516411203.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:03.629Z,1516411203.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:03.982Z,1516411203.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:04.022Z,1516411204.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:04.380Z,1516411204.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:04.395Z,1516411204.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:04.781Z,1516411204.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:04.796Z,1516411204.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:05.182Z,1516411205.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:05.198Z,1516411205.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:05.595Z,1516411205.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:05.625Z,1516411205.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:05.984Z,1516411205.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:05.998Z,1516411205.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:06.384Z,1516411206.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:06.404Z,1516411206.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:06.786Z,1516411206.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:06.803Z,1516411206.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:07.190Z,1516411207.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:07.204Z,1516411207.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:07.585Z,1516411207.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:07.607Z,1516411207.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:07.978Z,1516411207.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:07.998Z,1516411207.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:08.376Z,1516411208.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:08.390Z,1516411208.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:08.790Z,1516411208.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:08.804Z,1516411208.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:09.190Z,1516411209.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:09.204Z,1516411209.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:09.590Z,1516411209.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:09.607Z,1516411209.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:09.976Z,1516411209.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:10.002Z,1516411210.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:10.386Z,1516411210.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:10.400Z,1516411210.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:10.768Z,1516411210.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:10.803Z,1516411210.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:11.187Z,1516411211.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:11.213Z,1516411211.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:11.598Z,1516411211.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:11.620Z,1516411211.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:11.997Z,1516411211.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:12.011Z,1516411212.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:12.367Z,1516411212.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:12.401Z,1516411212.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:12.788Z,1516411212.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:12.807Z,1516411212.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:13.172Z,1516411213.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:13.200Z,1516411213.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:13.565Z,1516411213.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:13.592Z,1516411213.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:13.994Z,1516411213.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:14.015Z,1516411214.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:14.398Z,1516411214.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:14.414Z,1516411214.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:14.794Z,1516411214.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:14.813Z,1516411214.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:15.171Z,1516411215.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:15.196Z,1516411215.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:15.567Z,1516411215.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:15.603Z,1516411215.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:15.969Z,1516411215.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:15.995Z,1516411215.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:16.376Z,1516411216.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:16.401Z,1516411216.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:16.767Z,1516411216.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:16.803Z,1516411216.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:17.190Z,1516411217.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:17.205Z,1516411217.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:17.592Z,1516411217.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:17.607Z,1516411217.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:17.991Z,1516411217.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:18.005Z,1516411218.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:18.369Z,1516411218.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:18.391Z,1516411218.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:18.775Z,1516411218.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:18.807Z,1516411218.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:19.168Z,1516411219.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:19.210Z,1516411219.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:19.565Z,1516411219.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:19.579Z,1516411219.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:19.986Z,1516411219.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:20.019Z,1516411220.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:20.382Z,1516411220.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:20.415Z,1516411220.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:20.778Z,1516411220.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:20.811Z,1516411220.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:21.171Z,1516411221.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:21.211Z,1516411221.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:21.576Z,1516411221.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:21.590Z,1516411221.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:21.972Z,1516411221.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:21.987Z,1516411221.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:22.377Z,1516411222.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:22.391Z,1516411222.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:22.779Z,1516411222.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:22.793Z,1516411222.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:23.186Z,1516411223.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:23.217Z,1516411223.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:23.594Z,1516411223.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:23.623Z,1516411223.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:23.986Z,1516411223.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:23.000Z,1516411224.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:24.372Z,1516411224.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:24.394Z,1516411224.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:24.774Z,1516411224.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:24.796Z,1516411224.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:25.168Z,1516411225.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:25.194Z,1516411225.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:25.577Z,1516411225.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:25.599Z,1516411225.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:25.993Z,1516411225.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:26.008Z,1516411226.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:26.397Z,1516411226.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:26.411Z,1516411226.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:26.790Z,1516411226.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:26.804Z,1516411226.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:27.171Z,1516411227.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:27.202Z,1516411227.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:27.566Z,1516411227.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:27.600Z,1516411227.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:27.971Z,1516411227.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:28.002Z,1516411228.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:28.372Z,1516411228.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:28.397Z,1516411228.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:28.767Z,1516411228.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:28.798Z,1516411228.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:29.190Z,1516411229.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:29.204Z,1516411229.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:29.594Z,1516411229.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:29.608Z,1516411229.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:29.988Z,1516411229.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:30.018Z,1516411230.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:30.405Z,1516411230.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:30.434Z,1516411230.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:30.775Z,1516411230.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:30.806Z,1516411230.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:31.168Z,1516411231.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:31.210Z,1516411231.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:31.565Z,1516411231.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:31.579Z,1516411231.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:31.982Z,1516411231.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:32.008Z,1516411232.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:32.386Z,1516411232.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:32.412Z,1516411232.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:32.778Z,1516411232.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:32.809Z,1516411232.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:33.183Z,1516411233.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:33.212Z,1516411233.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:33.576Z,1516411233.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:33.591Z,1516411233.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:33.975Z,1516411233.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:34.015Z,1516411234.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:34.380Z,1516411234.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:34.414Z,1516411234.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:34.772Z,1516411234.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:34.786Z,1516411234.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:35.186Z,1516411235.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:35.216Z,1516411235.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:35.594Z,1516411235.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:35.618Z,1516411235.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:35.989Z,1516411235.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:36.023Z,1516411236.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:36.368Z,1516411236.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:36.394Z,1516411236.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:36.781Z,1516411236.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:36.795Z,1516411236.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:37.177Z,1516411237.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:37.191Z,1516411237.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:37.570Z,1516411237.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:37.601Z,1516411237.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:37.986Z,1516411237.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:38.000Z,1516411238.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:38.390Z,1516411238.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:38.404Z,1516411238.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:38.786Z,1516411238.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:38.800Z,1516411238.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:39.183Z,1516411239.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:39.203Z,1516411239.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:39.584Z,1516411239.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:39.598Z,1516411239.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:39.972Z,1516411239.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:39.998Z,1516411239.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:40.379Z,1516411240.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:40.398Z,1516411240.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:40.785Z,1516411240.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:40.799Z,1516411240.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:41.185Z,1516411241.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:41.204Z,1516411241.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:41.594Z,1516411241.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:41.608Z,1516411241.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:41.986Z,1516411241.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:42.020Z,1516411242.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:42.369Z,1516411242.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:42.407Z,1516411242.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:42.775Z,1516411242.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:42.807Z,1516411242.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:43.168Z,1516411243.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:43.204Z,1516411243.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:43.565Z,1516411243.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:43.579Z,1516411243.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:43.995Z,1516411243.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:44.010Z,1516411244.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:44.382Z,1516411244.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:44.410Z,1516411244.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:44.794Z,1516411244.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:44.815Z,1516411244.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:45.171Z,1516411245.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:45.207Z,1516411245.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:45.567Z,1516411245.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:45.611Z,1516411245.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:45.965Z,1516411245.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:45.979Z,1516411245.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:46.372Z,1516411246.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:46.386Z,1516411246.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:46.779Z,1516411246.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:46.816Z,1516411246.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:47.178Z,1516411247.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:47.192Z,1516411247.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:47.594Z,1516411247.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:47.619Z,1516411247.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:47.989Z,1516411247.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:48.017Z,1516411248.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:48.367Z,1516411248.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:48.394Z,1516411248.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:48.786Z,1516411248.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:48.800Z,1516411248.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:49.186Z,1516411249.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:49.199Z,1516411249.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:49.572Z,1516411249.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:49.598Z,1516411249.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:49.998Z,1516411249.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:50.028Z,1516411250.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:50.386Z,1516411250.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:50.399Z,1516411250.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:50.788Z,1516411250.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:50.802Z,1516411250.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:51.183Z,1516411251.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:51.198Z,1516411251.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:51.580Z,1516411251.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:51.595Z,1516411251.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:51.976Z,1516411251.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:51.995Z,1516411251.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:52.383Z,1516411252.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:52.403Z,1516411252.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:52.783Z,1516411252.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:52.798Z,1516411252.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:53.184Z,1516411253.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:53.200Z,1516411253.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:53.590Z,1516411253.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:53.605Z,1516411253.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:53.990Z,1516411253.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:54.029Z,1516411254.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:54.369Z,1516411254.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:54.390Z,1516411254.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:54.779Z,1516411254.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:54.793Z,1516411254.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:55.177Z,1516411255.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:55.190Z,1516411255.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:55.576Z,1516411255.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:55.594Z,1516411255.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:55.998Z,1516411255.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:56.028Z,1516411256.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:56.390Z,1516411256.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:56.404Z,1516411256.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:56.786Z,1516411256.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:56.800Z,1516411256.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:57.183Z,1516411257.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:57.197Z,1516411257.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:20:57.577Z,1516411257.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:20:57.590Z,1516411257.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:00.684Z,1516411260.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:00.703Z,1516411260.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:00.803Z,1516411260.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:00.829Z,1516411260.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:01.186Z,1516411261.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:01.200Z,1516411261.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:01.590Z,1516411261.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:01.604Z,1516411261.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:01.986Z,1516411261.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:02.000Z,1516411262.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:02.383Z,1516411262.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:02.397Z,1516411262.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:02.783Z,1516411262.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:02.798Z,1516411262.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:03.182Z,1516411263.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:03.196Z,1516411263.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:03.582Z,1516411263.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:03.596Z,1516411263.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:03.985Z,1516411263.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:03.000Z,1516411264.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:04.390Z,1516411264.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:04.404Z,1516411264.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:04.786Z,1516411264.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:04.800Z,1516411264.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:05.177Z,1516411265.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:05.192Z,1516411265.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:05.578Z,1516411265.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:05.596Z,1516411265.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:05.979Z,1516411265.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:05.993Z,1516411265.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:06.385Z,1516411266.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:06.399Z,1516411266.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:06.790Z,1516411266.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:06.804Z,1516411266.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:07.184Z,1516411267.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:07.203Z,1516411267.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:07.577Z,1516411267.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:07.592Z,1516411267.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:07.984Z,1516411267.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:08.003Z,1516411268.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:08.383Z,1516411268.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:08.403Z,1516411268.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:08.783Z,1516411268.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:08.798Z,1516411268.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:09.185Z,1516411269.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:09.199Z,1516411269.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:09.590Z,1516411269.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:09.604Z,1516411269.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:09.985Z,1516411269.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:09.999Z,1516411269.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:10.379Z,1516411270.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:10.393Z,1516411270.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:10.779Z,1516411270.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:10.793Z,1516411270.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:11.174Z,1516411271.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:11.193Z,1516411271.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:11.575Z,1516411271.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:11.596Z,1516411271.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:11.983Z,1516411271.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:11.997Z,1516411271.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:12.385Z,1516411272.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:12.400Z,1516411272.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:12.790Z,1516411272.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:12.804Z,1516411272.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:13.186Z,1516411273.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:13.200Z,1516411273.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:13.576Z,1516411273.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:13.590Z,1516411273.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:13.979Z,1516411273.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:13.993Z,1516411273.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:14.378Z,1516411274.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:14.411Z,1516411274.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:14.783Z,1516411274.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:14.798Z,1516411274.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:15.184Z,1516411275.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:15.203Z,1516411275.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:15.590Z,1516411275.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:15.604Z,1516411275.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:15.986Z,1516411275.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:16.007Z,1516411276.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:16.383Z,1516411276.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:16.397Z,1516411276.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:16.783Z,1516411276.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:16.797Z,1516411276.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:17.184Z,1516411277.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:17.198Z,1516411277.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:17.584Z,1516411277.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:17.599Z,1516411277.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:17.985Z,1516411277.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:17.999Z,1516411277.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:18.386Z,1516411278.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:18.400Z,1516411278.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:18.790Z,1516411278.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:18.804Z,1516411278.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:19.186Z,1516411279.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:19.200Z,1516411279.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:19.581Z,1516411279.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:19.595Z,1516411279.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:20.005Z,1516411280.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:20.027Z,1516411280.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:20.386Z,1516411280.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:20.400Z,1516411280.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:20.785Z,1516411280.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:20.799Z,1516411280.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:21.190Z,1516411281.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:21.204Z,1516411281.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:21.591Z,1516411281.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:21.605Z,1516411281.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:21.990Z,1516411281.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:22.004Z,1516411282.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:22.379Z,1516411282.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:22.394Z,1516411282.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:22.775Z,1516411282.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:22.795Z,1516411282.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:23.184Z,1516411283.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:23.199Z,1516411283.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:23.584Z,1516411283.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:23.598Z,1516411283.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:23.982Z,1516411283.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:23.996Z,1516411283.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:24.387Z,1516411284.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:24.401Z,1516411284.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:24.789Z,1516411284.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:24.803Z,1516411284.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:25.189Z,1516411285.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:25.203Z,1516411285.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:25.585Z,1516411285.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:25.599Z,1516411285.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:25.980Z,1516411285.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:25.994Z,1516411285.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:26.376Z,1516411286.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:26.394Z,1516411286.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:26.781Z,1516411286.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:26.795Z,1516411286.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:27.190Z,1516411287.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:27.204Z,1516411287.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:27.591Z,1516411287.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:27.604Z,1516411287.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:27.991Z,1516411287.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:28.005Z,1516411288.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:28.368Z,1516411288.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:28.399Z,1516411288.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:28.768Z,1516411288.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:28.794Z,1516411288.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:29.184Z,1516411289.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:29.199Z,1516411289.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:29.578Z,1516411289.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:29.601Z,1516411289.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:29.983Z,1516411289.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:29.998Z,1516411289.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:30.395Z,1516411290.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:30.410Z,1516411290.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:30.796Z,1516411290.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:30.812Z,1516411290.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:31.185Z,1516411291.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:31.198Z,1516411291.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:31.567Z,1516411291.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:31.593Z,1516411291.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:31.987Z,1516411291.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:32.000Z,1516411292.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:32.384Z,1516411292.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:32.398Z,1516411292.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:32.784Z,1516411292.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:32.798Z,1516411292.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:33.190Z,1516411293.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:33.204Z,1516411293.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:33.588Z,1516411293.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:33.623Z,1516411293.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:33.995Z,1516411293.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:34.009Z,1516411294.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:34.371Z,1516411294.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:34.406Z,1516411294.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:34.767Z,1516411294.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:34.809Z,1516411294.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:35.169Z,1516411295.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:35.183Z,1516411295.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:35.576Z,1516411295.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:35.610Z,1516411295.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:35.975Z,1516411295.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:35.989Z,1516411295.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:36.386Z,1516411296.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:36.412Z,1516411296.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:36.803Z,1516411296.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:36.817Z,1516411296.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:37.181Z,1516411297.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:37.215Z,1516411297.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:37.579Z,1516411297.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:37.594Z,1516411297.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:37.975Z,1516411297.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:37.995Z,1516411297.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:38.376Z,1516411298.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:38.389Z,1516411298.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:38.783Z,1516411298.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:38.798Z,1516411298.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:39.190Z,1516411299.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:39.204Z,1516411299.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:39.589Z,1516411299.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:39.603Z,1516411299.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:39.989Z,1516411299.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:40.003Z,1516411300.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:40.383Z,1516411300.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:40.403Z,1516411300.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:40.783Z,1516411300.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:40.796Z,1516411300.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:41.184Z,1516411301.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:41.199Z,1516411301.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:41.584Z,1516411301.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:41.598Z,1516411301.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:41.983Z,1516411301.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:41.996Z,1516411301.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:42.389Z,1516411302.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:42.404Z,1516411302.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:42.790Z,1516411302.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:42.804Z,1516411302.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:43.188Z,1516411303.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:43.202Z,1516411303.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:43.584Z,1516411303.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:43.598Z,1516411303.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:43.987Z,1516411303.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:44.001Z,1516411304.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:44.375Z,1516411304.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:44.389Z,1516411304.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:44.784Z,1516411304.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:44.803Z,1516411304.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:45.188Z,1516411305.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:45.207Z,1516411305.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:45.589Z,1516411305.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:45.603Z,1516411305.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:45.990Z,1516411305.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:46.004Z,1516411306.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:46.383Z,1516411306.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:46.403Z,1516411306.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:46.783Z,1516411306.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:46.796Z,1516411306.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:47.184Z,1516411307.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:47.203Z,1516411307.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:47.584Z,1516411307.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:47.598Z,1516411307.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:47.983Z,1516411307.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:47.997Z,1516411307.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:48.390Z,1516411308.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:48.404Z,1516411308.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:48.790Z,1516411308.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:48.804Z,1516411308.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:49.188Z,1516411309.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:49.202Z,1516411309.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:49.584Z,1516411309.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:49.598Z,1516411309.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:49.987Z,1516411309.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:50.007Z,1516411310.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:50.383Z,1516411310.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:50.397Z,1516411310.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:50.784Z,1516411310.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:50.803Z,1516411310.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:51.188Z,1516411311.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:51.203Z,1516411311.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:51.589Z,1516411311.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:51.603Z,1516411311.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:51.990Z,1516411311.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:52.004Z,1516411312.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:52.383Z,1516411312.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:52.403Z,1516411312.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:52.783Z,1516411312.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:52.797Z,1516411312.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:53.184Z,1516411313.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:53.198Z,1516411313.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:53.584Z,1516411313.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:53.598Z,1516411313.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:53.987Z,1516411313.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:54.001Z,1516411314.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:54.390Z,1516411314.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:54.404Z,1516411314.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:54.790Z,1516411314.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:54.804Z,1516411314.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:55.189Z,1516411315.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:55.203Z,1516411315.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:55.584Z,1516411315.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:55.603Z,1516411315.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:55.983Z,1516411315.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:56.003Z,1516411316.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:56.385Z,1516411316.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:56.398Z,1516411316.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:56.784Z,1516411316.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:56.799Z,1516411316.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:57.189Z,1516411317.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:57.211Z,1516411317.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:57.590Z,1516411317.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:57.604Z,1516411317.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:21:57.990Z,1516411317.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:21:58.004Z,1516411318.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:01.076Z,1516411321.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:01.095Z,1516411321.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:01.205Z,1516411321.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:01.242Z,1516411321.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:01.526Z,1516411321.526 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T01:22:01.526Z,1516411321.526 [NAL9602] Data Fault, FailCount= 3
2018-01-20T01:22:01.526Z,1516411321.526 [NAL9602](ERROR): Data Fault
2018-01-20T01:22:01.549Z,1516411321.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:01.575Z,1516411321.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:01.605Z,1516411321.605 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T01:22:01.926Z,1516411321.926 [NAL9602](INFO): Powering down
2018-01-20T01:22:01.951Z,1516411321.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:01.981Z,1516411321.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:02.340Z,1516411322.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:02.367Z,1516411322.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:02.752Z,1516411322.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:02.770Z,1516411322.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:02.783Z,1516411322.783 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T01:22:02.783Z,1516411322.783 [NAL9602] No Fault, FailCount= 3
2018-01-20T01:22:03.140Z,1516411323.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:03.166Z,1516411323.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:03.556Z,1516411323.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:03.571Z,1516411323.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:03.946Z,1516411323.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:03.977Z,1516411323.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:04.356Z,1516411324.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:04.370Z,1516411324.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:04.740Z,1516411324.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:04.768Z,1516411324.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:05.155Z,1516411325.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:05.169Z,1516411325.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:05.555Z,1516411325.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:05.569Z,1516411325.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:05.956Z,1516411325.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:05.971Z,1516411325.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:06.339Z,1516411326.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:06.363Z,1516411326.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:06.755Z,1516411326.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:06.768Z,1516411326.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:07.140Z,1516411327.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:07.175Z,1516411327.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:07.543Z,1516411327.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:07.575Z,1516411327.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:07.955Z,1516411327.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:07.969Z,1516411327.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:08.339Z,1516411328.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:08.370Z,1516411328.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:08.739Z,1516411328.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:08.763Z,1516411328.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:09.155Z,1516411329.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:09.168Z,1516411329.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:09.540Z,1516411329.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:09.570Z,1516411329.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:09.943Z,1516411329.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:09.976Z,1516411329.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:10.339Z,1516411330.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:10.364Z,1516411330.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:10.739Z,1516411330.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:10.764Z,1516411330.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:11.139Z,1516411331.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:11.171Z,1516411331.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:11.555Z,1516411331.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:11.568Z,1516411331.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:11.954Z,1516411331.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:11.968Z,1516411331.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:12.343Z,1516411332.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:12.374Z,1516411332.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:12.755Z,1516411332.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:12.768Z,1516411332.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:13.140Z,1516411333.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:13.170Z,1516411333.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:13.539Z,1516411333.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:13.570Z,1516411333.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:13.954Z,1516411333.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:13.974Z,1516411333.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:14.340Z,1516411334.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:14.370Z,1516411334.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:14.743Z,1516411334.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:14.767Z,1516411334.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:15.143Z,1516411335.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:15.168Z,1516411335.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:15.536Z,1516411335.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:15.563Z,1516411335.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:15.947Z,1516411335.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:15.971Z,1516411335.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:16.347Z,1516411336.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:16.373Z,1516411336.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:16.743Z,1516411336.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:16.768Z,1516411336.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:17.143Z,1516411337.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:17.167Z,1516411337.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:17.547Z,1516411337.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:17.578Z,1516411337.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:17.947Z,1516411337.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:17.979Z,1516411337.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:18.339Z,1516411338.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:18.369Z,1516411338.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:18.747Z,1516411338.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:18.778Z,1516411338.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:19.135Z,1516411339.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:19.158Z,1516411339.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:19.543Z,1516411339.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:19.573Z,1516411339.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:19.947Z,1516411339.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:19.973Z,1516411339.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:20.335Z,1516411340.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:20.350Z,1516411340.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:20.739Z,1516411340.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:20.780Z,1516411340.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:21.147Z,1516411341.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:21.179Z,1516411341.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:21.536Z,1516411341.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:21.551Z,1516411341.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:21.943Z,1516411341.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:21.980Z,1516411341.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:22.344Z,1516411342.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:22.379Z,1516411342.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:22.747Z,1516411342.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:22.777Z,1516411342.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:23.147Z,1516411343.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:23.160Z,1516411343.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:23.547Z,1516411343.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:23.583Z,1516411343.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:23.947Z,1516411343.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:23.990Z,1516411343.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:24.347Z,1516411344.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:24.388Z,1516411344.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:24.744Z,1516411344.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:24.763Z,1516411344.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:25.150Z,1516411345.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:25.164Z,1516411345.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:25.550Z,1516411345.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:25.563Z,1516411345.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:25.951Z,1516411345.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:25.987Z,1516411345.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:26.347Z,1516411346.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:26.361Z,1516411346.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:26.748Z,1516411346.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:26.761Z,1516411346.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:27.151Z,1516411347.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:27.171Z,1516411347.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:27.548Z,1516411347.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:27.562Z,1516411347.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:27.952Z,1516411347.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:27.966Z,1516411347.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:28.348Z,1516411348.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:28.363Z,1516411348.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:28.752Z,1516411348.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:28.766Z,1516411348.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:29.152Z,1516411349.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:29.166Z,1516411349.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:29.548Z,1516411349.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:29.563Z,1516411349.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:29.952Z,1516411349.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:29.972Z,1516411349.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:30.352Z,1516411350.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:30.366Z,1516411350.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:30.753Z,1516411350.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:30.767Z,1516411350.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:31.152Z,1516411351.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:31.167Z,1516411351.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:31.553Z,1516411351.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:31.567Z,1516411351.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:31.936Z,1516411351.936 [NAL9602](INFO): Powering up NAL9602
2018-01-20T01:22:31.954Z,1516411351.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:31.975Z,1516411351.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:32.352Z,1516411352.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:32.367Z,1516411352.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:32.748Z,1516411352.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:32.761Z,1516411352.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:33.153Z,1516411353.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:33.167Z,1516411353.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:33.552Z,1516411353.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:33.567Z,1516411353.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:33.954Z,1516411353.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:33.967Z,1516411353.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:34.344Z,1516411354.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:34.364Z,1516411354.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:34.753Z,1516411354.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:34.767Z,1516411354.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:35.154Z,1516411355.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:35.168Z,1516411355.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:35.544Z,1516411355.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:35.563Z,1516411355.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:35.955Z,1516411355.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:35.969Z,1516411355.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:36.350Z,1516411356.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:36.377Z,1516411356.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:36.755Z,1516411356.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:36.770Z,1516411356.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:37.146Z,1516411357.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:37.162Z,1516411357.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:37.546Z,1516411357.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:37.563Z,1516411357.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:37.955Z,1516411357.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:37.969Z,1516411357.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:38.346Z,1516411358.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:38.361Z,1516411358.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:38.757Z,1516411358.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:38.771Z,1516411358.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:39.144Z,1516411359.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:39.175Z,1516411359.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:39.556Z,1516411359.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:39.570Z,1516411359.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:39.946Z,1516411359.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:39.972Z,1516411359.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:39.972Z,1516411359.972 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2018-01-20T01:22:39.972Z,1516411359.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:22:39.974Z,1516411359.974 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:39.974Z,1516411359.974 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2018-01-20T01:22:39.974Z,1516411359.974 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:22:39.976Z,1516411359.976 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:39.976Z,1516411359.976 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 84
2018-01-20T01:22:39.976Z,1516411359.976 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:22:39.988Z,1516411359.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:22:39.988Z,1516411359.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:22:40.011Z,1516411360.011 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:22:40.339Z,1516411360.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:40.381Z,1516411360.381 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:22:40.381Z,1516411360.381 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2018-01-20T01:22:40.382Z,1516411360.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:22:40.382Z,1516411360.382 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2018-01-20T01:22:40.382Z,1516411360.382 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:22:40.382Z,1516411360.382 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 84
2018-01-20T01:22:40.750Z,1516411360.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:40.778Z,1516411360.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:22:40.778Z,1516411360.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:22:40.779Z,1516411360.779 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:22:40.779Z,1516411360.779 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:22:40.779Z,1516411360.779 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:22:40.780Z,1516411360.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:22:40.780Z,1516411360.780 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:22:40.780Z,1516411360.780 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:22:40.785Z,1516411360.785 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:22:41.155Z,1516411361.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:41.174Z,1516411361.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:22:41.175Z,1516411361.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:41.541Z,1516411361.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:41.575Z,1516411361.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:22:41.576Z,1516411361.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:41.948Z,1516411361.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:41.978Z,1516411361.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:22:41.979Z,1516411361.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:42.340Z,1516411362.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:42.353Z,1516411362.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:22:42.354Z,1516411362.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:42.755Z,1516411362.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:42.787Z,1516411362.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:22:42.788Z,1516411362.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:43.126Z,1516411363.126 [NAL9602](INFO): NAL9602 initialized
2018-01-20T01:22:43.144Z,1516411363.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:43.162Z,1516411363.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:22:43.163Z,1516411363.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:43.552Z,1516411363.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:43.566Z,1516411363.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:22:43.567Z,1516411363.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:43.963Z,1516411363.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:43.994Z,1516411363.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:22:43.995Z,1516411363.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:44.367Z,1516411364.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:44.390Z,1516411364.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:22:44.391Z,1516411364.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:44.767Z,1516411364.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:44.790Z,1516411364.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:22:44.791Z,1516411364.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:45.155Z,1516411365.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:45.170Z,1516411365.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:22:45.170Z,1516411365.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:45.545Z,1516411365.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:45.559Z,1516411365.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:22:45.560Z,1516411365.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:45.956Z,1516411365.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:45.970Z,1516411365.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:22:45.971Z,1516411365.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:46.366Z,1516411366.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:46.396Z,1516411366.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T01:22:46.397Z,1516411366.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:46.762Z,1516411366.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:46.776Z,1516411366.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:22:46.797Z,1516411366.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:47.154Z,1516411367.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:47.168Z,1516411367.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:22:47.169Z,1516411367.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:47.551Z,1516411367.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:47.565Z,1516411367.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:22:47.566Z,1516411367.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:47.944Z,1516411367.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:47.966Z,1516411367.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:22:47.967Z,1516411367.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:48.358Z,1516411368.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:48.372Z,1516411368.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:22:48.373Z,1516411368.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:48.762Z,1516411368.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:48.775Z,1516411368.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:22:48.776Z,1516411368.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:49.158Z,1516411369.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:49.172Z,1516411369.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:22:49.173Z,1516411369.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:49.550Z,1516411369.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:49.568Z,1516411369.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:22:49.569Z,1516411369.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:49.948Z,1516411369.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:49.962Z,1516411369.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:22:49.963Z,1516411369.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:50.358Z,1516411370.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:50.372Z,1516411370.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:22:50.373Z,1516411370.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:50.762Z,1516411370.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:50.776Z,1516411370.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:22:50.777Z,1516411370.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:51.158Z,1516411371.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:51.178Z,1516411371.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:22:51.179Z,1516411371.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:51.549Z,1516411371.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:51.563Z,1516411371.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:22:51.564Z,1516411371.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:51.950Z,1516411371.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:51.968Z,1516411371.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:22:51.969Z,1516411371.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:52.352Z,1516411372.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:52.365Z,1516411372.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:22:52.366Z,1516411372.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:52.758Z,1516411372.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:52.772Z,1516411372.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:22:52.773Z,1516411372.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:53.158Z,1516411373.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:53.172Z,1516411373.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:22:53.173Z,1516411373.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:53.558Z,1516411373.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:53.578Z,1516411373.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:22:53.579Z,1516411373.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:53.955Z,1516411373.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:53.969Z,1516411373.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:22:53.970Z,1516411373.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:54.355Z,1516411374.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:54.369Z,1516411374.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:22:54.370Z,1516411374.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:54.753Z,1516411374.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:54.766Z,1516411374.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:22:54.767Z,1516411374.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:55.155Z,1516411375.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:55.168Z,1516411375.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:22:55.170Z,1516411375.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:55.555Z,1516411375.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:55.574Z,1516411375.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:22:55.575Z,1516411375.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:55.961Z,1516411375.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:55.000Z,1516411376.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:22:56.001Z,1516411376.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:56.358Z,1516411376.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:56.372Z,1516411376.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:22:56.373Z,1516411376.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:56.754Z,1516411376.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:56.768Z,1516411376.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:22:56.769Z,1516411376.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:57.156Z,1516411377.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:57.169Z,1516411377.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:22:57.170Z,1516411377.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:57.551Z,1516411377.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:57.570Z,1516411377.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:22:57.571Z,1516411377.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:57.955Z,1516411377.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:57.974Z,1516411377.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:22:57.975Z,1516411377.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:22:58.356Z,1516411378.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:22:58.370Z,1516411378.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:22:58.371Z,1516411378.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:01.477Z,1516411381.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:01.499Z,1516411381.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:01.618Z,1516411381.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:01.655Z,1516411381.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:01.959Z,1516411381.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:01.973Z,1516411381.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:02.361Z,1516411382.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:02.375Z,1516411382.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:02.757Z,1516411382.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:02.771Z,1516411382.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:03.156Z,1516411383.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:03.171Z,1516411383.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:03.558Z,1516411383.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:03.573Z,1516411383.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:03.970Z,1516411383.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:03.999Z,1516411383.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:04.370Z,1516411384.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:04.399Z,1516411384.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:04.755Z,1516411384.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:04.771Z,1516411384.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:05.154Z,1516411385.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:05.169Z,1516411385.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:05.556Z,1516411385.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:05.575Z,1516411385.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:05.957Z,1516411385.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:05.972Z,1516411385.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:06.351Z,1516411386.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:06.365Z,1516411386.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:06.770Z,1516411386.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:06.800Z,1516411386.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:07.162Z,1516411387.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:07.176Z,1516411387.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:07.570Z,1516411387.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:07.599Z,1516411387.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:07.959Z,1516411387.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:07.973Z,1516411387.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:08.357Z,1516411388.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:08.371Z,1516411388.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:08.757Z,1516411388.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:08.771Z,1516411388.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:09.158Z,1516411389.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:09.172Z,1516411389.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:09.570Z,1516411389.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:09.601Z,1516411389.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:09.970Z,1516411389.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:09.999Z,1516411389.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:10.358Z,1516411390.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:10.372Z,1516411390.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:10.757Z,1516411390.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:10.771Z,1516411390.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:11.157Z,1516411391.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:11.179Z,1516411391.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:11.557Z,1516411391.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:11.572Z,1516411391.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:11.958Z,1516411391.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:11.973Z,1516411391.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:12.355Z,1516411392.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:12.375Z,1516411392.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:12.770Z,1516411392.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:12.784Z,1516411392.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:13.166Z,1516411393.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:13.180Z,1516411393.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:13.563Z,1516411393.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:13.577Z,1516411393.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:13.960Z,1516411393.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:13.975Z,1516411393.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:14.352Z,1516411394.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:14.367Z,1516411394.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:14.750Z,1516411394.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:14.782Z,1516411394.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:15.163Z,1516411395.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:15.178Z,1516411395.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:15.567Z,1516411395.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:15.581Z,1516411395.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:15.966Z,1516411395.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:15.987Z,1516411395.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:16.365Z,1516411396.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:16.380Z,1516411396.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:16.759Z,1516411396.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:16.773Z,1516411396.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:17.146Z,1516411397.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:17.178Z,1516411397.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:17.561Z,1516411397.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:17.584Z,1516411397.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:17.961Z,1516411397.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:17.975Z,1516411397.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:18.364Z,1516411398.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:18.378Z,1516411398.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:18.770Z,1516411398.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:18.784Z,1516411398.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:19.170Z,1516411399.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:19.184Z,1516411399.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:19.570Z,1516411399.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:19.591Z,1516411399.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:19.960Z,1516411399.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:19.982Z,1516411399.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:20.361Z,1516411400.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:20.374Z,1516411400.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:20.756Z,1516411400.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:20.781Z,1516411400.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:21.162Z,1516411401.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:21.176Z,1516411401.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:21.568Z,1516411401.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:21.581Z,1516411401.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:21.973Z,1516411401.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:21.987Z,1516411401.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:22.370Z,1516411402.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:22.391Z,1516411402.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:22.762Z,1516411402.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:22.778Z,1516411402.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:23.159Z,1516411403.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:23.175Z,1516411403.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:23.558Z,1516411403.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:23.577Z,1516411403.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:23.948Z,1516411403.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:23.975Z,1516411403.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:24.361Z,1516411404.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:24.383Z,1516411404.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:24.770Z,1516411404.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:24.784Z,1516411404.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:25.173Z,1516411405.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:25.187Z,1516411405.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:25.570Z,1516411405.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:25.584Z,1516411405.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:25.958Z,1516411405.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:25.976Z,1516411405.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:26.346Z,1516411406.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:26.379Z,1516411406.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:26.760Z,1516411406.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:26.775Z,1516411406.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:27.163Z,1516411407.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:27.177Z,1516411407.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:27.562Z,1516411407.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:27.576Z,1516411407.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:27.967Z,1516411407.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:27.990Z,1516411407.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:28.374Z,1516411408.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:28.388Z,1516411408.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:28.747Z,1516411408.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:28.780Z,1516411408.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:29.153Z,1516411409.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:29.183Z,1516411409.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:29.549Z,1516411409.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:29.579Z,1516411409.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:29.946Z,1516411409.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:29.980Z,1516411409.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:30.351Z,1516411410.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:30.376Z,1516411410.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:30.762Z,1516411410.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:30.784Z,1516411410.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:31.167Z,1516411411.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:31.181Z,1516411411.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:31.566Z,1516411411.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:31.580Z,1516411411.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:31.955Z,1516411411.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:31.980Z,1516411411.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:32.343Z,1516411412.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:32.380Z,1516411412.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:32.752Z,1516411412.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:32.770Z,1516411412.770 [PNI_TCM](ERROR): CRC does not match. Expected:0x52556 got:0x7361
2018-01-20T01:23:32.795Z,1516411412.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:33.149Z,1516411413.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:33.176Z,1516411413.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:33.567Z,1516411413.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:33.581Z,1516411413.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:33.968Z,1516411413.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:33.986Z,1516411413.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:34.360Z,1516411414.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:34.395Z,1516411414.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:34.756Z,1516411414.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:34.785Z,1516411414.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:35.150Z,1516411415.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:35.164Z,1516411415.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:35.552Z,1516411415.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:35.585Z,1516411415.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:35.959Z,1516411415.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:35.972Z,1516411415.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:36.357Z,1516411416.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:36.371Z,1516411416.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:36.766Z,1516411416.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:36.795Z,1516411416.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:37.164Z,1516411417.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:37.190Z,1516411417.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:37.566Z,1516411417.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:37.596Z,1516411417.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:37.960Z,1516411417.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:37.979Z,1516411417.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:38.354Z,1516411418.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:38.368Z,1516411418.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:38.753Z,1516411418.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:38.794Z,1516411418.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:39.156Z,1516411419.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:39.163Z,1516411419.163 [PNI_TCM](ERROR): CRC does not match. Expected:0x3839 got:0x49482
2018-01-20T01:23:39.198Z,1516411419.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:39.555Z,1516411419.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:39.574Z,1516411419.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:39.970Z,1516411419.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:39.999Z,1516411419.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:40.364Z,1516411420.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:40.379Z,1516411420.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:40.759Z,1516411420.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:40.773Z,1516411420.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:41.158Z,1516411421.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:41.179Z,1516411421.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:41.559Z,1516411421.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:41.573Z,1516411421.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:41.953Z,1516411421.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:41.999Z,1516411421.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:42.358Z,1516411422.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:42.379Z,1516411422.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:42.770Z,1516411422.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:42.784Z,1516411422.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:43.166Z,1516411423.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:43.180Z,1516411423.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:43.563Z,1516411423.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:43.606Z,1516411423.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:43.956Z,1516411423.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:43.965Z,1516411423.965 [PNI_TCM](ERROR): CRC does not match. Expected:0x1615 got:0x1857
2018-01-20T01:23:44.006Z,1516411424.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:44.351Z,1516411424.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:44.373Z,1516411424.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:44.756Z,1516411424.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:44.782Z,1516411424.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:45.159Z,1516411425.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:45.191Z,1516411425.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:45.572Z,1516411425.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:45.579Z,1516411425.579 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2018-01-20T01:23:45.615Z,1516411425.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:45.972Z,1516411425.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:45.991Z,1516411425.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:46.368Z,1516411426.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:46.382Z,1516411426.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:46.759Z,1516411426.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:46.783Z,1516411426.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:47.157Z,1516411427.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:47.175Z,1516411427.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:47.551Z,1516411427.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:47.576Z,1516411427.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:47.957Z,1516411427.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:47.971Z,1516411427.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:48.359Z,1516411428.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:48.391Z,1516411428.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:48.772Z,1516411428.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:48.791Z,1516411428.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:49.174Z,1516411429.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:49.188Z,1516411429.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:49.572Z,1516411429.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:49.591Z,1516411429.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:49.962Z,1516411429.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:50.010Z,1516411430.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:50.358Z,1516411430.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:50.376Z,1516411430.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:50.753Z,1516411430.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:50.774Z,1516411430.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:51.153Z,1516411431.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:51.177Z,1516411431.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:51.565Z,1516411431.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:51.591Z,1516411431.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:51.971Z,1516411431.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:51.987Z,1516411431.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:52.371Z,1516411432.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:52.391Z,1516411432.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:52.765Z,1516411432.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:52.779Z,1516411432.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:53.153Z,1516411433.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:53.190Z,1516411433.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:53.559Z,1516411433.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:53.581Z,1516411433.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:53.944Z,1516411433.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:53.975Z,1516411433.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:54.353Z,1516411434.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:54.375Z,1516411434.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:54.765Z,1516411434.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:54.807Z,1516411434.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:55.167Z,1516411435.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:55.186Z,1516411435.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:55.564Z,1516411435.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:55.580Z,1516411435.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:55.950Z,1516411435.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:55.982Z,1516411435.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:56.361Z,1516411436.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:56.391Z,1516411436.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:56.747Z,1516411436.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:56.783Z,1516411436.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:57.160Z,1516411437.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:57.178Z,1516411437.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:57.575Z,1516411437.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:57.589Z,1516411437.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:57.973Z,1516411437.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:58.014Z,1516411438.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:23:58.368Z,1516411438.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:23:58.386Z,1516411438.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:01.461Z,1516411441.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:01.475Z,1516411441.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:01.572Z,1516411441.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:01.618Z,1516411441.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:01.942Z,1516411441.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:01.966Z,1516411441.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:02.346Z,1516411442.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:02.373Z,1516411442.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:02.742Z,1516411442.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:02.765Z,1516411442.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:03.128Z,1516411443.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:03.147Z,1516411443.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:03.524Z,1516411443.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:03.538Z,1516411443.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:03.929Z,1516411443.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:03.947Z,1516411443.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:04.332Z,1516411444.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:04.346Z,1516411444.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:04.746Z,1516411444.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:04.777Z,1516411444.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:05.130Z,1516411445.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:05.144Z,1516411445.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:05.538Z,1516411445.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:05.552Z,1516411445.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:05.932Z,1516411445.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:05.946Z,1516411445.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:06.329Z,1516411446.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:06.343Z,1516411446.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:06.733Z,1516411446.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:06.747Z,1516411446.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:07.128Z,1516411447.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:07.141Z,1516411447.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:07.532Z,1516411447.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:07.551Z,1516411447.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:07.939Z,1516411447.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:07.959Z,1516411447.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:08.338Z,1516411448.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:08.358Z,1516411448.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:08.729Z,1516411448.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:08.743Z,1516411448.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:09.131Z,1516411449.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:09.151Z,1516411449.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:09.535Z,1516411449.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:09.549Z,1516411449.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:09.935Z,1516411449.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:09.950Z,1516411449.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:10.330Z,1516411450.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:10.345Z,1516411450.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:10.737Z,1516411450.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:10.758Z,1516411450.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:11.134Z,1516411451.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:11.156Z,1516411451.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:11.540Z,1516411451.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:11.559Z,1516411451.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:11.936Z,1516411451.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:11.950Z,1516411451.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:12.329Z,1516411452.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:12.343Z,1516411452.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:12.730Z,1516411452.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:12.748Z,1516411452.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:13.128Z,1516411453.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:13.146Z,1516411453.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:13.541Z,1516411453.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:13.555Z,1516411453.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:13.940Z,1516411453.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:13.963Z,1516411453.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:14.346Z,1516411454.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:14.359Z,1516411454.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:14.736Z,1516411454.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:14.750Z,1516411454.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:15.135Z,1516411455.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:15.149Z,1516411455.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:15.538Z,1516411455.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:15.552Z,1516411455.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:15.945Z,1516411455.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:15.963Z,1516411455.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:16.342Z,1516411456.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:16.356Z,1516411456.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:16.720Z,1516411456.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:16.751Z,1516411456.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:17.129Z,1516411457.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:17.146Z,1516411457.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:17.542Z,1516411457.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:17.556Z,1516411457.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:17.943Z,1516411457.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:17.956Z,1516411457.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:18.334Z,1516411458.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:18.365Z,1516411458.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:18.736Z,1516411458.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:18.750Z,1516411458.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:19.119Z,1516411459.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:19.145Z,1516411459.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:19.542Z,1516411459.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:19.556Z,1516411459.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:19.946Z,1516411459.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:19.960Z,1516411459.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:20.338Z,1516411460.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:20.358Z,1516411460.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:20.736Z,1516411460.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:20.750Z,1516411460.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:21.123Z,1516411461.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:21.154Z,1516411461.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:21.541Z,1516411461.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:21.567Z,1516411461.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:21.950Z,1516411461.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:21.964Z,1516411461.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:22.342Z,1516411462.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:22.356Z,1516411462.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:22.720Z,1516411462.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:22.751Z,1516411462.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:23.121Z,1516411463.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:23.154Z,1516411463.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:23.542Z,1516411463.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:23.556Z,1516411463.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:23.943Z,1516411463.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:23.963Z,1516411463.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:24.343Z,1516411464.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:24.357Z,1516411464.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:24.724Z,1516411464.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:24.755Z,1516411464.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:25.119Z,1516411465.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:25.151Z,1516411465.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:25.538Z,1516411465.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:25.556Z,1516411465.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:25.953Z,1516411465.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:25.967Z,1516411465.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:26.347Z,1516411466.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:26.360Z,1516411466.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:26.721Z,1516411466.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:26.751Z,1516411466.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:27.124Z,1516411467.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:27.160Z,1516411467.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:27.551Z,1516411467.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:27.565Z,1516411467.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:27.951Z,1516411467.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:27.965Z,1516411467.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:28.334Z,1516411468.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:28.367Z,1516411468.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:28.725Z,1516411468.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:28.758Z,1516411468.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:29.121Z,1516411469.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:29.136Z,1516411469.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:29.539Z,1516411469.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:29.564Z,1516411469.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:29.938Z,1516411469.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:29.965Z,1516411469.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:30.334Z,1516411470.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:30.371Z,1516411470.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:30.732Z,1516411470.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:30.763Z,1516411470.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:31.131Z,1516411471.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:31.146Z,1516411471.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:31.530Z,1516411471.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:31.544Z,1516411471.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:31.956Z,1516411471.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:31.971Z,1516411471.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:32.335Z,1516411472.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:32.367Z,1516411472.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:32.734Z,1516411472.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:32.748Z,1516411472.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:33.130Z,1516411473.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:33.144Z,1516411473.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:33.546Z,1516411473.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:33.577Z,1516411473.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:33.942Z,1516411473.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:33.956Z,1516411473.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:34.346Z,1516411474.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:34.360Z,1516411474.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:34.733Z,1516411474.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:34.747Z,1516411474.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:35.129Z,1516411475.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:35.147Z,1516411475.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:35.538Z,1516411475.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:35.552Z,1516411475.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:35.938Z,1516411475.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:35.952Z,1516411475.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:36.333Z,1516411476.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:36.363Z,1516411476.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:36.737Z,1516411476.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:36.759Z,1516411476.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:37.137Z,1516411477.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:37.151Z,1516411477.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:37.542Z,1516411477.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:37.556Z,1516411477.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:37.946Z,1516411477.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:37.968Z,1516411477.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:38.347Z,1516411478.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:38.367Z,1516411478.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:38.737Z,1516411478.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:38.752Z,1516411478.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:39.135Z,1516411479.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:39.150Z,1516411479.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:39.538Z,1516411479.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:39.553Z,1516411479.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:39.944Z,1516411479.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:39.959Z,1516411479.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:40.342Z,1516411480.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:40.356Z,1516411480.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:40.732Z,1516411480.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:40.746Z,1516411480.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:41.129Z,1516411481.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:41.146Z,1516411481.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:41.541Z,1516411481.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:41.555Z,1516411481.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:41.945Z,1516411481.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:41.959Z,1516411481.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:42.342Z,1516411482.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:42.356Z,1516411482.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:42.730Z,1516411482.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:42.749Z,1516411482.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:43.119Z,1516411483.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:43.153Z,1516411483.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:43.542Z,1516411483.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:43.556Z,1516411483.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:43.945Z,1516411483.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:43.968Z,1516411483.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:44.336Z,1516411484.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:44.362Z,1516411484.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:44.736Z,1516411484.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:44.750Z,1516411484.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:45.126Z,1516411485.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:45.148Z,1516411485.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:45.539Z,1516411485.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:45.552Z,1516411485.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:45.944Z,1516411485.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:45.963Z,1516411485.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:46.341Z,1516411486.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:46.355Z,1516411486.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:46.732Z,1516411486.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:46.746Z,1516411486.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:47.129Z,1516411487.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:47.146Z,1516411487.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:47.541Z,1516411487.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:47.555Z,1516411487.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:47.945Z,1516411487.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:47.967Z,1516411487.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:48.342Z,1516411488.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:48.356Z,1516411488.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:48.731Z,1516411488.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:48.749Z,1516411488.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:49.132Z,1516411489.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:49.150Z,1516411489.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:49.542Z,1516411489.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:49.556Z,1516411489.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:49.945Z,1516411489.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:49.970Z,1516411489.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:50.346Z,1516411490.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:50.367Z,1516411490.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:50.721Z,1516411490.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:50.746Z,1516411490.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:51.124Z,1516411491.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:51.154Z,1516411491.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:51.536Z,1516411491.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:51.550Z,1516411491.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:51.946Z,1516411491.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:51.960Z,1516411491.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:52.345Z,1516411492.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:52.359Z,1516411492.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:52.743Z,1516411492.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:52.757Z,1516411492.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:53.153Z,1516411493.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:53.183Z,1516411493.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:53.522Z,1516411493.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:53.551Z,1516411493.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:53.924Z,1516411493.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:53.958Z,1516411493.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:54.321Z,1516411494.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:54.335Z,1516411494.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:54.738Z,1516411494.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:54.763Z,1516411494.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:55.138Z,1516411495.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:55.167Z,1516411495.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:55.534Z,1516411495.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:55.567Z,1516411495.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:55.923Z,1516411495.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:55.959Z,1516411495.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:56.327Z,1516411496.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:56.363Z,1516411496.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:56.731Z,1516411496.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:56.771Z,1516411496.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:57.129Z,1516411497.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:57.169Z,1516411497.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:57.531Z,1516411497.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:57.571Z,1516411497.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:57.574Z,1516411497.574 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T01:19:57.2Z
2018-01-20T01:24:57.574Z,1516411497.574 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T01:24:57.575Z,1516411497.575 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T01:24:57.946Z,1516411497.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:57.968Z,1516411497.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:58.394Z,1516411498.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:58.408Z,1516411498.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:24:58.750Z,1516411498.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:24:58.780Z,1516411498.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:01.835Z,1516411501.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:01.850Z,1516411501.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:01.942Z,1516411501.942 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0104.lzma
2018-01-20T01:25:01.972Z,1516411501.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:02.011Z,1516411502.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:02.326Z,1516411502.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:02.363Z,1516411502.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:02.699Z,1516411502.699 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0104.lzma.bak
2018-01-20T01:25:02.699Z,1516411502.699 [DataOverHttps](INFO): SBD MOMSN=7725654
2018-01-20T01:25:02.734Z,1516411502.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:02.776Z,1516411502.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:03.226Z,1516411503.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:03.256Z,1516411503.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:03.521Z,1516411503.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:03.535Z,1516411503.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:06.612Z,1516411506.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:06.627Z,1516411506.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:06.729Z,1516411506.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:06.766Z,1516411506.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:07.130Z,1516411507.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:07.144Z,1516411507.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:07.534Z,1516411507.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:07.548Z,1516411507.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:07.923Z,1516411507.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:07.937Z,1516411507.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:08.322Z,1516411508.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:08.336Z,1516411508.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:11.412Z,1516411511.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:11.426Z,1516411511.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:11.502Z,1516411511.502 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180119T210901/Express0105.lzma
2018-01-20T01:25:11.523Z,1516411511.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:11.571Z,1516411511.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:11.891Z,1516411511.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:11.914Z,1516411511.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:12.259Z,1516411512.259 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0105.lzma.bak
2018-01-20T01:25:12.259Z,1516411512.259 [DataOverHttps](INFO): SBD MOMSN=7725656
2018-01-20T01:25:12.314Z,1516411512.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:12.342Z,1516411512.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:12.786Z,1516411512.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:12.816Z,1516411512.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:12.819Z,1516411512.819 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T01:25:12.819Z,1516411512.819 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T01:25:12.819Z,1516411512.819 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T01:25:13.080Z,1516411513.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:13.115Z,1516411513.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:16.196Z,1516411516.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:16.219Z,1516411516.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:16.322Z,1516411516.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:16.359Z,1516411516.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:16.682Z,1516411516.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:16.696Z,1516411516.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:17.094Z,1516411517.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:17.123Z,1516411517.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:17.476Z,1516411517.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:17.495Z,1516411517.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:17.876Z,1516411517.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:17.895Z,1516411517.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:18.276Z,1516411518.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:18.290Z,1516411518.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:18.666Z,1516411518.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:18.686Z,1516411518.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:19.077Z,1516411519.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:19.091Z,1516411519.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:19.476Z,1516411519.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:19.490Z,1516411519.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:19.890Z,1516411519.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:19.919Z,1516411519.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:20.282Z,1516411520.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:20.296Z,1516411520.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:20.690Z,1516411520.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:20.720Z,1516411520.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:21.073Z,1516411521.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:21.087Z,1516411521.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:21.476Z,1516411521.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:21.495Z,1516411521.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:21.877Z,1516411521.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:21.891Z,1516411521.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:22.267Z,1516411522.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:22.319Z,1516411522.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:22.684Z,1516411522.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:22.699Z,1516411522.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:23.085Z,1516411523.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:23.106Z,1516411523.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:23.482Z,1516411523.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:23.496Z,1516411523.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:23.875Z,1516411523.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:23.895Z,1516411523.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:24.274Z,1516411524.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:24.301Z,1516411524.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:24.672Z,1516411524.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:24.690Z,1516411524.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:25.071Z,1516411525.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:25.093Z,1516411525.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:25.484Z,1516411525.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:25.498Z,1516411525.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:25.906Z,1516411525.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:25.928Z,1516411525.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:26.284Z,1516411526.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:26.303Z,1516411526.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:26.685Z,1516411526.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:26.699Z,1516411526.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:27.072Z,1516411527.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:27.090Z,1516411527.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:27.469Z,1516411527.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:27.495Z,1516411527.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:27.877Z,1516411527.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:27.892Z,1516411527.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:28.279Z,1516411528.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:28.299Z,1516411528.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:28.686Z,1516411528.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:28.700Z,1516411528.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:29.090Z,1516411529.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:29.104Z,1516411529.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:29.478Z,1516411529.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:29.504Z,1516411529.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:29.880Z,1516411529.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:29.899Z,1516411529.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:30.268Z,1516411530.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:30.304Z,1516411530.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:30.665Z,1516411530.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:30.698Z,1516411530.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:31.068Z,1516411531.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:31.098Z,1516411531.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:31.468Z,1516411531.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:31.504Z,1516411531.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:31.886Z,1516411531.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:31.900Z,1516411531.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:32.294Z,1516411532.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:32.308Z,1516411532.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:32.687Z,1516411532.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:32.701Z,1516411532.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:33.063Z,1516411533.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:33.094Z,1516411533.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:33.467Z,1516411533.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:33.498Z,1516411533.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:33.881Z,1516411533.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:33.896Z,1516411533.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:34.263Z,1516411534.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:34.289Z,1516411534.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:34.681Z,1516411534.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:34.703Z,1516411534.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:35.097Z,1516411535.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:35.111Z,1516411535.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:35.490Z,1516411535.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:35.504Z,1516411535.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:35.867Z,1516411535.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:35.892Z,1516411535.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:36.268Z,1516411536.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:36.295Z,1516411536.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:36.663Z,1516411536.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:36.694Z,1516411536.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:37.068Z,1516411537.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:37.098Z,1516411537.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:37.468Z,1516411537.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:37.495Z,1516411537.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:37.878Z,1516411537.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:37.900Z,1516411537.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:38.291Z,1516411538.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:38.305Z,1516411538.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:38.691Z,1516411538.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:38.711Z,1516411538.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:39.071Z,1516411539.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:39.097Z,1516411539.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:39.485Z,1516411539.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:39.499Z,1516411539.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:39.884Z,1516411539.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:39.898Z,1516411539.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:40.264Z,1516411540.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:40.294Z,1516411540.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:40.690Z,1516411540.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:40.711Z,1516411540.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:41.095Z,1516411541.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:41.115Z,1516411541.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:41.115Z,1516411541.115 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2018-01-20T01:25:41.115Z,1516411541.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:25:41.117Z,1516411541.117 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:41.117Z,1516411541.117 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2018-01-20T01:25:41.117Z,1516411541.117 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:25:41.119Z,1516411541.119 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:41.119Z,1516411541.119 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 85
2018-01-20T01:25:41.119Z,1516411541.119 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:25:41.155Z,1516411541.155 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:25:41.155Z,1516411541.155 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:25:41.155Z,1516411541.155 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:25:41.475Z,1516411541.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:41.510Z,1516411541.510 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:25:41.510Z,1516411541.510 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2018-01-20T01:25:41.511Z,1516411541.511 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:25:41.511Z,1516411541.511 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2018-01-20T01:25:41.511Z,1516411541.511 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:25:41.511Z,1516411541.511 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 85
2018-01-20T01:25:41.868Z,1516411541.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:41.906Z,1516411541.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:25:41.906Z,1516411541.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:25:41.906Z,1516411541.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:25:41.907Z,1516411541.907 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:25:41.907Z,1516411541.907 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:25:41.908Z,1516411541.908 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:25:41.908Z,1516411541.908 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:25:41.908Z,1516411541.908 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:25:41.913Z,1516411541.913 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:25:42.306Z,1516411542.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:42.319Z,1516411542.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:25:42.320Z,1516411542.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:42.668Z,1516411542.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:42.694Z,1516411542.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:25:42.695Z,1516411542.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:43.078Z,1516411543.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:43.092Z,1516411543.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:25:43.093Z,1516411543.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:43.472Z,1516411543.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:43.494Z,1516411543.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:25:43.495Z,1516411543.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:43.891Z,1516411543.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:43.925Z,1516411543.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:25:43.926Z,1516411543.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:44.291Z,1516411544.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:44.304Z,1516411544.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:25:44.322Z,1516411544.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:44.682Z,1516411544.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:44.696Z,1516411544.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:25:44.698Z,1516411544.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:45.071Z,1516411545.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:45.085Z,1516411545.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:25:45.086Z,1516411545.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:45.476Z,1516411545.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:45.489Z,1516411545.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:25:45.490Z,1516411545.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:45.873Z,1516411545.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:45.887Z,1516411545.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:25:45.887Z,1516411545.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:46.266Z,1516411546.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:46.297Z,1516411546.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:25:46.298Z,1516411546.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:46.681Z,1516411546.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:46.695Z,1516411546.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:25:46.696Z,1516411546.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:47.082Z,1516411547.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:47.095Z,1516411547.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:25:47.096Z,1516411547.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:47.482Z,1516411547.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:47.496Z,1516411547.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T01:25:47.497Z,1516411547.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:47.880Z,1516411547.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:47.894Z,1516411547.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:25:47.895Z,1516411547.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:48.281Z,1516411548.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:48.295Z,1516411548.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:25:48.295Z,1516411548.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:48.682Z,1516411548.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:48.696Z,1516411548.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:25:48.697Z,1516411548.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:49.082Z,1516411549.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:49.096Z,1516411549.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:25:49.097Z,1516411549.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:49.486Z,1516411549.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:49.499Z,1516411549.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:25:49.500Z,1516411549.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:49.880Z,1516411549.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:49.894Z,1516411549.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:25:49.895Z,1516411549.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:50.275Z,1516411550.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:50.294Z,1516411550.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:25:50.295Z,1516411550.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:50.673Z,1516411550.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:50.687Z,1516411550.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:25:50.688Z,1516411550.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:51.070Z,1516411551.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:51.088Z,1516411551.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:25:51.094Z,1516411551.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:51.474Z,1516411551.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:51.494Z,1516411551.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:25:51.495Z,1516411551.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:51.888Z,1516411551.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:51.902Z,1516411551.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:25:51.903Z,1516411551.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:52.288Z,1516411552.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:52.302Z,1516411552.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:25:52.303Z,1516411552.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:52.686Z,1516411552.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:52.700Z,1516411552.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:25:52.701Z,1516411552.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:53.063Z,1516411553.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:53.102Z,1516411553.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:25:53.103Z,1516411553.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:53.471Z,1516411553.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:53.502Z,1516411553.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:25:53.503Z,1516411553.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:53.868Z,1516411553.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:53.894Z,1516411553.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:25:53.895Z,1516411553.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:54.262Z,1516411554.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:54.303Z,1516411554.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:25:54.304Z,1516411554.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:54.690Z,1516411554.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:54.710Z,1516411554.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:25:54.711Z,1516411554.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:55.090Z,1516411555.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:55.104Z,1516411555.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:25:55.106Z,1516411555.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:55.473Z,1516411555.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:55.514Z,1516411555.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:25:55.515Z,1516411555.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:55.872Z,1516411555.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:55.897Z,1516411555.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:25:55.898Z,1516411555.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:56.267Z,1516411556.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:56.292Z,1516411556.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:25:56.293Z,1516411556.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:56.684Z,1516411556.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:56.697Z,1516411556.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:25:56.698Z,1516411556.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:57.094Z,1516411557.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:57.107Z,1516411557.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:25:57.108Z,1516411557.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:57.485Z,1516411557.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:57.502Z,1516411557.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:25:57.503Z,1516411557.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:57.872Z,1516411557.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:57.898Z,1516411557.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:25:57.898Z,1516411557.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:58.271Z,1516411558.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:58.296Z,1516411558.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:25:58.297Z,1516411558.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:58.686Z,1516411558.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:58.700Z,1516411558.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:25:58.701Z,1516411558.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:59.085Z,1516411559.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:59.110Z,1516411559.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:25:59.111Z,1516411559.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:59.482Z,1516411559.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:59.496Z,1516411559.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:25:59.497Z,1516411559.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:25:59.868Z,1516411559.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:25:59.898Z,1516411559.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:25:59.899Z,1516411559.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:00.271Z,1516411560.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:00.304Z,1516411560.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:26:00.304Z,1516411560.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:00.690Z,1516411560.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:00.704Z,1516411560.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:26:00.705Z,1516411560.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:01.090Z,1516411561.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:01.104Z,1516411561.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T01:26:01.105Z,1516411561.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:01.474Z,1516411561.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:01.507Z,1516411561.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:01.872Z,1516411561.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:01.902Z,1516411561.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:02.271Z,1516411562.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:02.303Z,1516411562.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:02.692Z,1516411562.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:02.706Z,1516411562.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:03.091Z,1516411563.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:03.105Z,1516411563.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:03.478Z,1516411563.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:03.515Z,1516411563.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:03.869Z,1516411563.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:03.882Z,1516411563.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:04.275Z,1516411564.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:04.308Z,1516411564.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:04.686Z,1516411564.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:04.715Z,1516411564.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:05.097Z,1516411565.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:05.111Z,1516411565.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:05.486Z,1516411565.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:05.515Z,1516411565.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:05.876Z,1516411565.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:05.906Z,1516411565.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:06.275Z,1516411566.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:06.289Z,1516411566.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:06.682Z,1516411566.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:06.717Z,1516411566.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:07.090Z,1516411567.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:07.113Z,1516411567.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:07.478Z,1516411567.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:07.495Z,1516411567.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:07.873Z,1516411567.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:07.887Z,1516411567.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:08.279Z,1516411568.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:08.295Z,1516411568.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:08.686Z,1516411568.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:08.700Z,1516411568.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:09.086Z,1516411569.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:09.120Z,1516411569.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:09.482Z,1516411569.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:09.496Z,1516411569.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:09.877Z,1516411569.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:09.891Z,1516411569.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:10.276Z,1516411570.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:10.291Z,1516411570.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:10.690Z,1516411570.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:10.720Z,1516411570.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:11.090Z,1516411571.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:11.121Z,1516411571.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:11.486Z,1516411571.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:11.520Z,1516411571.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:11.877Z,1516411571.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:11.891Z,1516411571.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:12.271Z,1516411572.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:12.291Z,1516411572.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:12.678Z,1516411572.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:12.693Z,1516411572.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:13.090Z,1516411573.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:13.119Z,1516411573.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:13.478Z,1516411573.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:13.492Z,1516411573.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:16.567Z,1516411576.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:16.590Z,1516411576.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:16.688Z,1516411576.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:16.723Z,1516411576.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:17.083Z,1516411577.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:17.102Z,1516411577.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:17.482Z,1516411577.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:17.496Z,1516411577.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:17.881Z,1516411577.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:17.896Z,1516411577.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:18.259Z,1516411578.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:18.295Z,1516411578.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:18.661Z,1516411578.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:18.692Z,1516411578.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:19.068Z,1516411579.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:19.093Z,1516411579.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:19.467Z,1516411579.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:19.494Z,1516411579.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:19.887Z,1516411579.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:19.907Z,1516411579.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:20.286Z,1516411580.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:20.307Z,1516411580.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:20.692Z,1516411580.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:20.706Z,1516411580.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:21.058Z,1516411581.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:21.084Z,1516411581.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:21.468Z,1516411581.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:21.494Z,1516411581.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:21.869Z,1516411581.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:21.896Z,1516411581.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:22.257Z,1516411582.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:22.272Z,1516411582.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:22.675Z,1516411582.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:22.700Z,1516411582.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:23.075Z,1516411583.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:23.107Z,1516411583.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:23.474Z,1516411583.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:23.510Z,1516411583.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:23.868Z,1516411583.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:23.894Z,1516411583.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:24.267Z,1516411584.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:24.308Z,1516411584.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:24.674Z,1516411584.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:24.701Z,1516411584.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:25.078Z,1516411585.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:25.111Z,1516411585.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:25.474Z,1516411585.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:25.502Z,1516411585.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:25.867Z,1516411585.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:25.903Z,1516411585.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:26.264Z,1516411586.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:26.278Z,1516411586.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:26.667Z,1516411586.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:26.681Z,1516411586.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:27.070Z,1516411587.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:27.084Z,1516411587.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:27.482Z,1516411587.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:27.504Z,1516411587.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:27.882Z,1516411587.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:27.908Z,1516411587.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:28.265Z,1516411588.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:28.279Z,1516411588.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:28.671Z,1516411588.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:28.707Z,1516411588.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:29.069Z,1516411589.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:29.083Z,1516411589.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:29.464Z,1516411589.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:29.483Z,1516411589.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:29.882Z,1516411589.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:29.912Z,1516411589.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:30.290Z,1516411590.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:30.314Z,1516411590.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:30.679Z,1516411590.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:30.709Z,1516411590.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:31.074Z,1516411591.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:31.088Z,1516411591.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:31.473Z,1516411591.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:31.487Z,1516411591.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:31.873Z,1516411591.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:31.888Z,1516411591.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:32.270Z,1516411592.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:32.291Z,1516411592.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:32.673Z,1516411592.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:32.687Z,1516411592.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:33.072Z,1516411593.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:33.087Z,1516411593.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:33.487Z,1516411593.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:33.516Z,1516411593.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:33.874Z,1516411593.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:33.894Z,1516411593.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:34.269Z,1516411594.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:34.283Z,1516411594.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:34.672Z,1516411594.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:34.692Z,1516411594.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:35.072Z,1516411595.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:35.085Z,1516411595.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:35.500Z,1516411595.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:35.523Z,1516411595.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:35.874Z,1516411595.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:35.888Z,1516411595.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:36.286Z,1516411596.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:36.320Z,1516411596.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:36.672Z,1516411596.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:36.691Z,1516411596.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:37.072Z,1516411597.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:37.091Z,1516411597.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:37.472Z,1516411597.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:37.486Z,1516411597.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:37.872Z,1516411597.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:37.891Z,1516411597.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:38.273Z,1516411598.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:38.295Z,1516411598.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:38.671Z,1516411598.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:38.690Z,1516411598.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:39.071Z,1516411599.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:39.091Z,1516411599.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:39.486Z,1516411599.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:39.516Z,1516411599.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:39.886Z,1516411599.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:39.918Z,1516411599.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:40.266Z,1516411600.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:40.280Z,1516411600.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:40.682Z,1516411600.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:40.696Z,1516411600.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:41.073Z,1516411601.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:41.087Z,1516411601.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:41.466Z,1516411601.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:41.484Z,1516411601.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:41.886Z,1516411601.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:41.900Z,1516411601.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:42.277Z,1516411602.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:42.291Z,1516411602.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:42.676Z,1516411602.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:42.695Z,1516411602.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:43.072Z,1516411603.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:43.086Z,1516411603.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:43.472Z,1516411603.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:43.486Z,1516411603.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:43.875Z,1516411603.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:43.890Z,1516411603.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:44.275Z,1516411604.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:44.295Z,1516411604.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:44.676Z,1516411604.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:44.690Z,1516411604.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:45.076Z,1516411605.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:45.095Z,1516411605.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:45.482Z,1516411605.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:45.496Z,1516411605.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:45.878Z,1516411605.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:45.898Z,1516411605.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:46.262Z,1516411606.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:46.284Z,1516411606.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:46.676Z,1516411606.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:46.695Z,1516411606.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:47.064Z,1516411607.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:47.098Z,1516411607.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:47.461Z,1516411607.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:47.487Z,1516411607.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:47.889Z,1516411607.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:47.903Z,1516411607.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:48.291Z,1516411608.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:48.304Z,1516411608.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:48.674Z,1516411608.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:48.695Z,1516411608.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:49.063Z,1516411609.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:49.088Z,1516411609.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:49.462Z,1516411609.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:49.495Z,1516411609.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:49.868Z,1516411609.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:49.893Z,1516411609.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:50.280Z,1516411610.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:50.294Z,1516411610.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:50.659Z,1516411610.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:50.695Z,1516411610.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:51.078Z,1516411611.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:51.100Z,1516411611.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:51.486Z,1516411611.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:51.500Z,1516411611.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:51.886Z,1516411611.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:51.900Z,1516411611.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:52.263Z,1516411612.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:52.294Z,1516411612.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:52.665Z,1516411612.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:52.691Z,1516411612.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:53.062Z,1516411613.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:53.091Z,1516411613.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:53.463Z,1516411613.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:53.494Z,1516411613.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:53.889Z,1516411613.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:53.904Z,1516411613.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:54.290Z,1516411614.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:54.304Z,1516411614.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:54.682Z,1516411614.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:54.696Z,1516411614.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:55.064Z,1516411615.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:55.094Z,1516411615.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:55.463Z,1516411615.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:55.494Z,1516411615.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:55.879Z,1516411615.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:55.893Z,1516411615.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:56.266Z,1516411616.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:56.292Z,1516411616.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:56.668Z,1516411616.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:56.694Z,1516411616.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:57.082Z,1516411617.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:57.097Z,1516411617.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:57.487Z,1516411617.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:57.502Z,1516411617.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:57.884Z,1516411617.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:57.902Z,1516411617.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:58.263Z,1516411618.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:58.286Z,1516411618.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:58.671Z,1516411618.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:58.696Z,1516411618.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:59.069Z,1516411619.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:59.097Z,1516411619.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:59.459Z,1516411619.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:59.475Z,1516411619.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:26:59.878Z,1516411619.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:26:59.903Z,1516411619.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:00.278Z,1516411620.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:00.304Z,1516411620.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:00.676Z,1516411620.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:00.703Z,1516411620.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:01.066Z,1516411621.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:01.097Z,1516411621.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:01.470Z,1516411621.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:01.484Z,1516411621.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:01.866Z,1516411621.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:01.883Z,1516411621.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:02.269Z,1516411622.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:02.288Z,1516411622.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:02.674Z,1516411622.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:02.689Z,1516411622.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:03.075Z,1516411623.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:03.090Z,1516411623.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:03.486Z,1516411623.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:03.508Z,1516411623.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:03.880Z,1516411623.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:03.911Z,1516411623.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:04.263Z,1516411624.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:04.283Z,1516411624.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:04.674Z,1516411624.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:04.688Z,1516411624.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:05.071Z,1516411625.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:05.085Z,1516411625.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:05.469Z,1516411625.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:05.503Z,1516411625.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:05.880Z,1516411625.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:05.887Z,1516411625.887 [PNI_TCM](ERROR): CRC does not match. Expected:0x22955 got:0x48664
2018-01-20T01:27:05.926Z,1516411625.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:06.281Z,1516411626.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:06.295Z,1516411626.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:06.678Z,1516411626.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:06.692Z,1516411626.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:07.075Z,1516411627.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:07.115Z,1516411627.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:07.471Z,1516411627.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:07.479Z,1516411627.479 [PNI_TCM](ERROR): CRC does not match. Expected:0x64451 got:0x16662
2018-01-20T01:27:07.499Z,1516411627.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:07.874Z,1516411627.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:07.888Z,1516411627.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:08.272Z,1516411628.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:08.290Z,1516411628.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:08.677Z,1516411628.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:08.723Z,1516411628.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:09.081Z,1516411629.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:09.088Z,1516411629.088 [PNI_TCM](ERROR): CRC does not match. Expected:0x33171 got:0x7361
2018-01-20T01:27:09.124Z,1516411629.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:09.485Z,1516411629.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:09.499Z,1516411629.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:09.884Z,1516411629.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:09.898Z,1516411629.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:10.266Z,1516411630.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:10.303Z,1516411630.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:10.674Z,1516411630.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:10.691Z,1516411630.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:11.081Z,1516411631.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:11.095Z,1516411631.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:11.473Z,1516411631.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:11.488Z,1516411631.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:11.879Z,1516411631.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:11.916Z,1516411631.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:12.284Z,1516411632.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:12.291Z,1516411632.291 [PNI_TCM](ERROR): CRC does not match. Expected:0x59636 got:0x6593
2018-01-20T01:27:12.328Z,1516411632.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:12.683Z,1516411632.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:12.702Z,1516411632.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:13.079Z,1516411633.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:13.093Z,1516411633.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:13.476Z,1516411633.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:13.503Z,1516411633.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:13.870Z,1516411633.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:13.894Z,1516411633.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:16.975Z,1516411636.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:16.990Z,1516411636.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:17.085Z,1516411637.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:17.102Z,1516411637.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:17.458Z,1516411637.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:17.503Z,1516411637.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:17.858Z,1516411637.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:17.879Z,1516411637.879 [PNI_TCM](ERROR): CRC does not match. Expected:0x17231 got:0x35864
2018-01-20T01:27:17.899Z,1516411637.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:18.250Z,1516411638.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:18.283Z,1516411638.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:18.640Z,1516411638.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:18.655Z,1516411638.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:19.044Z,1516411639.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:19.058Z,1516411639.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:19.443Z,1516411639.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:19.463Z,1516411639.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:19.850Z,1516411639.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:19.871Z,1516411639.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:20.250Z,1516411640.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:20.264Z,1516411640.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:20.650Z,1516411640.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:20.664Z,1516411640.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:21.043Z,1516411641.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:21.063Z,1516411641.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:21.447Z,1516411641.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:21.461Z,1516411641.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:21.843Z,1516411641.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:21.858Z,1516411641.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:22.240Z,1516411642.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:22.262Z,1516411642.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:22.648Z,1516411642.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:22.662Z,1516411642.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:23.066Z,1516411643.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:23.080Z,1516411643.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:23.454Z,1516411643.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:23.468Z,1516411643.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:23.850Z,1516411643.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:23.864Z,1516411643.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:24.247Z,1516411644.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:24.267Z,1516411644.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:24.643Z,1516411644.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:24.657Z,1516411644.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:25.040Z,1516411645.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:25.058Z,1516411645.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:25.447Z,1516411645.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:25.467Z,1516411645.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:25.852Z,1516411645.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:25.871Z,1516411645.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:26.253Z,1516411646.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:26.266Z,1516411646.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:26.652Z,1516411646.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:26.671Z,1516411646.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:27.047Z,1516411647.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:27.067Z,1516411647.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:27.448Z,1516411647.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:27.462Z,1516411647.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:27.847Z,1516411647.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:27.867Z,1516411647.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:28.244Z,1516411648.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:28.259Z,1516411648.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:28.638Z,1516411648.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:28.663Z,1516411648.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:29.053Z,1516411649.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:29.071Z,1516411649.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:29.452Z,1516411649.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:29.471Z,1516411649.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:29.853Z,1516411649.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:29.867Z,1516411649.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:30.242Z,1516411650.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:30.260Z,1516411650.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:30.643Z,1516411650.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:30.657Z,1516411650.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:31.040Z,1516411651.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:31.058Z,1516411651.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:31.447Z,1516411651.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:31.467Z,1516411651.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:31.853Z,1516411651.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:31.867Z,1516411651.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:32.253Z,1516411652.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:32.274Z,1516411652.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:32.657Z,1516411652.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:32.679Z,1516411652.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:33.042Z,1516411653.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:33.060Z,1516411653.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:33.431Z,1516411653.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:33.467Z,1516411653.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:33.848Z,1516411653.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:33.862Z,1516411653.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:34.256Z,1516411654.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:34.270Z,1516411654.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:34.631Z,1516411654.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:34.665Z,1516411654.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:35.050Z,1516411655.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:35.077Z,1516411655.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:35.458Z,1516411655.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:35.472Z,1516411655.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:35.849Z,1516411655.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:35.889Z,1516411655.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:36.236Z,1516411656.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:36.267Z,1516411656.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:36.640Z,1516411656.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:36.670Z,1516411656.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:37.045Z,1516411657.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:37.081Z,1516411657.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:37.433Z,1516411657.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:37.447Z,1516411657.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:37.854Z,1516411657.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:37.883Z,1516411657.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:38.255Z,1516411658.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:38.279Z,1516411658.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:38.651Z,1516411658.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:38.674Z,1516411658.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:39.053Z,1516411659.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:39.076Z,1516411659.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:39.440Z,1516411659.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:39.455Z,1516411659.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:39.850Z,1516411659.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:39.881Z,1516411659.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:40.254Z,1516411660.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:40.276Z,1516411660.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:40.653Z,1516411660.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:40.683Z,1516411660.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:41.044Z,1516411661.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:41.058Z,1516411661.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:41.443Z,1516411661.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:41.463Z,1516411661.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:41.854Z,1516411661.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:41.888Z,1516411661.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:42.254Z,1516411662.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:42.284Z,1516411662.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:42.658Z,1516411662.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:42.687Z,1516411662.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:43.040Z,1516411663.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:43.054Z,1516411663.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:43.440Z,1516411663.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:43.454Z,1516411663.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:43.850Z,1516411663.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:43.864Z,1516411663.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:44.258Z,1516411664.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:44.290Z,1516411664.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:44.642Z,1516411664.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:44.656Z,1516411664.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:45.043Z,1516411665.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:45.063Z,1516411665.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:45.445Z,1516411665.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:45.459Z,1516411665.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:45.858Z,1516411665.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:45.872Z,1516411665.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:46.254Z,1516411666.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:46.275Z,1516411666.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:46.654Z,1516411666.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:46.668Z,1516411666.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:47.040Z,1516411667.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:47.059Z,1516411667.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:47.450Z,1516411667.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:47.464Z,1516411667.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:47.851Z,1516411667.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:47.865Z,1516411667.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:48.251Z,1516411668.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:48.274Z,1516411668.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:48.654Z,1516411668.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:48.669Z,1516411668.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:49.032Z,1516411669.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:49.060Z,1516411669.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:49.461Z,1516411669.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:49.497Z,1516411669.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:49.859Z,1516411669.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:49.874Z,1516411669.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:50.259Z,1516411670.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:50.273Z,1516411670.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:50.646Z,1516411670.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:50.672Z,1516411670.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:51.036Z,1516411671.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:51.071Z,1516411671.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:51.439Z,1516411671.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:51.453Z,1516411671.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:51.851Z,1516411671.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:51.866Z,1516411671.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:52.272Z,1516411672.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:52.286Z,1516411672.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:52.646Z,1516411672.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:52.678Z,1516411672.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:53.044Z,1516411673.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:53.058Z,1516411673.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:53.443Z,1516411673.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:53.463Z,1516411673.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:53.854Z,1516411673.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:53.868Z,1516411673.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:54.254Z,1516411674.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:54.268Z,1516411674.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:54.658Z,1516411674.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:54.672Z,1516411674.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:55.048Z,1516411675.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:55.061Z,1516411675.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:55.441Z,1516411675.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:55.455Z,1516411675.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:55.848Z,1516411675.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:55.866Z,1516411675.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:56.254Z,1516411676.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:56.267Z,1516411676.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:56.649Z,1516411676.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:56.663Z,1516411676.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:57.051Z,1516411677.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:57.071Z,1516411677.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:57.448Z,1516411677.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:57.462Z,1516411677.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:57.885Z,1516411677.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:57.899Z,1516411677.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:58.252Z,1516411678.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:58.271Z,1516411678.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:58.653Z,1516411678.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:58.667Z,1516411678.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:59.048Z,1516411679.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:59.063Z,1516411679.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:59.443Z,1516411679.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:59.457Z,1516411679.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:27:59.850Z,1516411679.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:27:59.864Z,1516411679.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:00.254Z,1516411680.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:00.268Z,1516411680.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:00.652Z,1516411680.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:00.671Z,1516411680.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:01.041Z,1516411681.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:01.054Z,1516411681.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:01.433Z,1516411681.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:01.459Z,1516411681.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:01.858Z,1516411681.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:01.879Z,1516411681.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:02.257Z,1516411682.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:02.271Z,1516411682.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:02.653Z,1516411682.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:02.667Z,1516411682.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:03.042Z,1516411683.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:03.061Z,1516411683.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:03.431Z,1516411683.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:03.457Z,1516411683.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:03.857Z,1516411683.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:03.871Z,1516411683.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:04.256Z,1516411684.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:04.275Z,1516411684.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:04.658Z,1516411684.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:04.678Z,1516411684.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:05.048Z,1516411685.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:05.062Z,1516411685.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:05.438Z,1516411685.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:05.460Z,1516411685.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:05.851Z,1516411685.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:05.865Z,1516411685.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:06.256Z,1516411686.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:06.275Z,1516411686.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:06.657Z,1516411686.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:06.679Z,1516411686.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:07.049Z,1516411687.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:07.063Z,1516411687.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:07.441Z,1516411687.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:07.461Z,1516411687.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:07.853Z,1516411687.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:07.867Z,1516411687.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:08.254Z,1516411688.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:08.274Z,1516411688.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:08.645Z,1516411688.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:08.671Z,1516411688.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:09.048Z,1516411689.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:09.062Z,1516411689.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:09.431Z,1516411689.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:09.465Z,1516411689.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:09.858Z,1516411689.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:09.872Z,1516411689.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:10.258Z,1516411690.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:10.272Z,1516411690.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:10.648Z,1516411690.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:10.676Z,1516411690.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:11.034Z,1516411691.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:11.059Z,1516411691.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:11.435Z,1516411691.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:11.466Z,1516411691.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:11.848Z,1516411691.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:11.869Z,1516411691.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:12.255Z,1516411692.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:12.269Z,1516411692.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:12.650Z,1516411692.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:12.670Z,1516411692.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:13.031Z,1516411693.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:13.062Z,1516411693.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:13.430Z,1516411693.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:13.463Z,1516411693.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:13.840Z,1516411693.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:13.865Z,1516411693.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:14.254Z,1516411694.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:14.275Z,1516411694.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:17.353Z,1516411697.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:17.368Z,1516411697.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:17.486Z,1516411697.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:17.527Z,1516411697.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:17.823Z,1516411697.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:17.839Z,1516411697.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:18.224Z,1516411698.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:18.238Z,1516411698.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:18.614Z,1516411698.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:18.641Z,1516411698.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:19.026Z,1516411699.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:19.041Z,1516411699.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:19.438Z,1516411699.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:19.469Z,1516411699.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:19.826Z,1516411699.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:19.840Z,1516411699.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:20.221Z,1516411700.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:20.247Z,1516411700.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:20.628Z,1516411700.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:20.642Z,1516411700.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:21.027Z,1516411701.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:21.042Z,1516411701.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:21.430Z,1516411701.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:21.451Z,1516411701.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:21.829Z,1516411701.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:21.843Z,1516411701.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:22.234Z,1516411702.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:22.248Z,1516411702.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:22.636Z,1516411702.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:22.658Z,1516411702.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:23.037Z,1516411703.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:23.063Z,1516411703.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:23.415Z,1516411703.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:23.446Z,1516411703.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:23.844Z,1516411703.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:23.862Z,1516411703.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:24.217Z,1516411704.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:24.283Z,1516411704.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:24.613Z,1516411704.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:24.627Z,1516411704.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:25.039Z,1516411705.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:25.063Z,1516411705.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:25.489Z,1516411705.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:25.566Z,1516411705.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:25.832Z,1516411705.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:25.867Z,1516411705.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:26.226Z,1516411706.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:26.263Z,1516411706.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:26.622Z,1516411706.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:26.690Z,1516411706.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:27.023Z,1516411707.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:27.062Z,1516411707.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:27.426Z,1516411707.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:27.447Z,1516411707.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:27.826Z,1516411707.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:27.873Z,1516411707.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:28.229Z,1516411708.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:28.272Z,1516411708.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:28.666Z,1516411708.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:28.696Z,1516411708.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:29.031Z,1516411709.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:29.102Z,1516411709.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:29.424Z,1516411709.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:29.451Z,1516411709.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:29.825Z,1516411709.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:29.844Z,1516411709.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:30.228Z,1516411710.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:30.251Z,1516411710.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:30.626Z,1516411710.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:30.650Z,1516411710.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:31.028Z,1516411711.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:31.064Z,1516411711.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:31.432Z,1516411711.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:31.499Z,1516411711.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:31.829Z,1516411711.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:31.868Z,1516411711.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:32.221Z,1516411712.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:32.263Z,1516411712.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:32.622Z,1516411712.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:32.672Z,1516411712.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:33.022Z,1516411713.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:33.074Z,1516411713.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:33.426Z,1516411713.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:33.447Z,1516411713.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:33.826Z,1516411713.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:33.852Z,1516411713.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:34.235Z,1516411714.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:34.255Z,1516411714.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:34.635Z,1516411714.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:34.658Z,1516411714.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:35.036Z,1516411715.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:35.093Z,1516411715.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:35.425Z,1516411715.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:35.452Z,1516411715.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:35.826Z,1516411715.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:35.855Z,1516411715.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:36.247Z,1516411716.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:36.318Z,1516411716.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:36.618Z,1516411716.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:36.652Z,1516411716.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:37.028Z,1516411717.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:37.063Z,1516411717.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:37.433Z,1516411717.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:37.496Z,1516411717.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:37.832Z,1516411717.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:37.859Z,1516411717.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:38.231Z,1516411718.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:38.260Z,1516411718.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:38.620Z,1516411718.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:38.634Z,1516411718.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:39.023Z,1516411719.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:39.059Z,1516411719.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:39.424Z,1516411719.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:39.438Z,1516411719.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:39.823Z,1516411719.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:39.837Z,1516411719.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:40.230Z,1516411720.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:40.244Z,1516411720.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:40.634Z,1516411720.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:40.648Z,1516411720.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:41.038Z,1516411721.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:41.071Z,1516411721.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:41.412Z,1516411721.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:41.438Z,1516411721.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:41.826Z,1516411721.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:41.841Z,1516411721.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:42.228Z,1516411722.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:42.242Z,1516411722.242 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:42.242Z,1516411722.242 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2018-01-20T01:28:42.242Z,1516411722.242 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:28:42.243Z,1516411722.243 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:42.244Z,1516411722.244 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2018-01-20T01:28:42.244Z,1516411722.244 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:28:42.253Z,1516411722.253 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:42.254Z,1516411722.254 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 86
2018-01-20T01:28:42.254Z,1516411722.254 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:28:42.291Z,1516411722.291 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:28:42.291Z,1516411722.291 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:28:42.291Z,1516411722.291 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:28:42.614Z,1516411722.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:42.656Z,1516411722.656 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:28:42.656Z,1516411722.656 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2018-01-20T01:28:42.656Z,1516411722.656 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:28:42.656Z,1516411722.656 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2018-01-20T01:28:42.657Z,1516411722.657 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:28:42.657Z,1516411722.657 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 86
2018-01-20T01:28:43.032Z,1516411723.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:43.054Z,1516411723.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:28:43.054Z,1516411723.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:28:43.054Z,1516411723.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:28:43.055Z,1516411723.055 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:28:43.055Z,1516411723.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:28:43.055Z,1516411723.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:28:43.056Z,1516411723.056 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:28:43.056Z,1516411723.056 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:28:43.056Z,1516411723.056 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:28:43.434Z,1516411723.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:43.454Z,1516411723.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:28:43.455Z,1516411723.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:43.838Z,1516411723.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:43.851Z,1516411723.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:28:43.852Z,1516411723.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:44.215Z,1516411724.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:44.246Z,1516411724.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:28:44.247Z,1516411724.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:44.628Z,1516411724.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:44.641Z,1516411724.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:28:44.642Z,1516411724.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:45.027Z,1516411725.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:45.046Z,1516411725.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:28:45.047Z,1516411725.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:45.416Z,1516411725.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:45.440Z,1516411725.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:28:45.442Z,1516411725.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:45.811Z,1516411725.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:45.845Z,1516411725.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:28:45.846Z,1516411725.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:46.238Z,1516411726.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:46.251Z,1516411726.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:28:46.252Z,1516411726.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:46.638Z,1516411726.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:46.651Z,1516411726.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:28:46.652Z,1516411726.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:47.039Z,1516411727.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:47.052Z,1516411727.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:28:47.053Z,1516411727.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:47.409Z,1516411727.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:47.442Z,1516411727.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:28:47.443Z,1516411727.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:47.815Z,1516411727.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:47.846Z,1516411727.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:28:47.847Z,1516411727.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:48.212Z,1516411728.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:48.238Z,1516411728.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:28:48.239Z,1516411728.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:48.613Z,1516411728.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:48.639Z,1516411728.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T01:28:48.640Z,1516411728.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:49.038Z,1516411729.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:49.052Z,1516411729.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:28:49.053Z,1516411729.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:49.443Z,1516411729.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:49.456Z,1516411729.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:28:49.457Z,1516411729.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:49.838Z,1516411729.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:49.855Z,1516411729.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:28:49.856Z,1516411729.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:50.230Z,1516411730.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:50.257Z,1516411730.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:28:50.258Z,1516411730.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:50.619Z,1516411730.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:50.632Z,1516411730.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:28:50.633Z,1516411730.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:51.027Z,1516411731.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:51.049Z,1516411731.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:28:51.050Z,1516411731.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:51.427Z,1516411731.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:51.445Z,1516411731.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:28:51.446Z,1516411731.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:51.827Z,1516411731.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:51.857Z,1516411731.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:28:51.858Z,1516411731.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:52.231Z,1516411732.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:52.273Z,1516411732.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:28:52.274Z,1516411732.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:52.640Z,1516411732.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:52.659Z,1516411732.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:28:52.660Z,1516411732.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:53.036Z,1516411733.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:53.055Z,1516411733.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:28:53.056Z,1516411733.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:53.417Z,1516411733.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:53.455Z,1516411733.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:28:53.455Z,1516411733.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:53.817Z,1516411733.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:53.851Z,1516411733.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:28:53.852Z,1516411733.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:54.218Z,1516411734.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:54.291Z,1516411734.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:28:54.292Z,1516411734.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:54.617Z,1516411734.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:54.655Z,1516411734.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:28:54.656Z,1516411734.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:55.027Z,1516411735.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:55.055Z,1516411735.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:28:55.056Z,1516411735.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:55.454Z,1516411735.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:55.507Z,1516411735.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-01-20T01:28:55.508Z,1516411735.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:55.828Z,1516411735.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:55.863Z,1516411735.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:28:55.864Z,1516411735.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:56.226Z,1516411736.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:56.262Z,1516411736.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:28:56.263Z,1516411736.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:56.621Z,1516411736.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:56.643Z,1516411736.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:28:56.644Z,1516411736.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:57.025Z,1516411737.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:57.051Z,1516411737.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:28:57.052Z,1516411737.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:57.426Z,1516411737.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:57.448Z,1516411737.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:28:57.454Z,1516411737.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:57.826Z,1516411737.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:57.890Z,1516411737.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:28:57.891Z,1516411737.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:58.236Z,1516411738.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:58.279Z,1516411738.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:28:58.280Z,1516411738.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:58.639Z,1516411738.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:58.660Z,1516411738.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:28:58.677Z,1516411738.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:59.038Z,1516411739.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:59.052Z,1516411739.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:28:59.053Z,1516411739.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:59.421Z,1516411739.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:59.439Z,1516411739.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:28:59.440Z,1516411739.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:28:59.826Z,1516411739.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:28:59.844Z,1516411739.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:28:59.845Z,1516411739.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:00.212Z,1516411740.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:00.243Z,1516411740.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:29:00.244Z,1516411740.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:00.610Z,1516411740.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:00.635Z,1516411740.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:29:00.636Z,1516411740.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:01.034Z,1516411741.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:01.048Z,1516411741.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:29:01.049Z,1516411741.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:01.435Z,1516411741.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:01.449Z,1516411741.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:29:01.450Z,1516411741.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:01.826Z,1516411741.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:01.848Z,1516411741.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:29:01.850Z,1516411741.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:02.215Z,1516411742.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:02.253Z,1516411742.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:02.619Z,1516411742.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:02.646Z,1516411742.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:03.019Z,1516411743.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:03.045Z,1516411743.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:03.420Z,1516411743.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:03.446Z,1516411743.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:03.815Z,1516411743.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:03.845Z,1516411743.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:04.222Z,1516411744.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:04.249Z,1516411744.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:04.647Z,1516411744.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:04.662Z,1516411744.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:05.040Z,1516411745.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:05.055Z,1516411745.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:05.414Z,1516411745.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:05.428Z,1516411745.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:05.814Z,1516411745.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:05.855Z,1516411745.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:06.221Z,1516411746.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:06.234Z,1516411746.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:06.610Z,1516411746.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:06.657Z,1516411746.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:07.042Z,1516411747.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:07.071Z,1516411747.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:07.430Z,1516411747.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:07.444Z,1516411747.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:07.823Z,1516411747.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:07.843Z,1516411747.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:08.224Z,1516411748.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:08.239Z,1516411748.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:08.624Z,1516411748.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:08.639Z,1516411748.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:09.024Z,1516411749.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:09.039Z,1516411749.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:09.422Z,1516411749.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:09.436Z,1516411749.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:09.821Z,1516411749.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:09.848Z,1516411749.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:10.230Z,1516411750.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:10.244Z,1516411750.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:10.636Z,1516411750.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:10.651Z,1516411750.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:11.039Z,1516411751.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:11.059Z,1516411751.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:11.409Z,1516411751.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:11.434Z,1516411751.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:11.818Z,1516411751.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:11.931Z,1516411751.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:12.227Z,1516411752.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:12.242Z,1516411752.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:12.609Z,1516411752.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:12.631Z,1516411752.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:13.042Z,1516411753.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:13.063Z,1516411753.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:13.442Z,1516411753.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:13.462Z,1516411753.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:13.838Z,1516411753.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:13.852Z,1516411753.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:14.215Z,1516411754.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:14.242Z,1516411754.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:14.620Z,1516411754.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:14.647Z,1516411754.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:17.713Z,1516411757.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:17.751Z,1516411757.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:17.781Z,1516411757.781 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T01:29:17.826Z,1516411757.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:17.867Z,1516411757.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:18.239Z,1516411758.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:18.254Z,1516411758.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:18.646Z,1516411758.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:18.667Z,1516411758.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:19.038Z,1516411759.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:19.052Z,1516411759.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:19.415Z,1516411759.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:19.446Z,1516411759.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:19.819Z,1516411759.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:19.855Z,1516411759.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:20.216Z,1516411760.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:20.230Z,1516411760.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:20.619Z,1516411760.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:20.655Z,1516411760.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:21.030Z,1516411761.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:21.060Z,1516411761.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:21.430Z,1516411761.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:21.444Z,1516411761.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:21.839Z,1516411761.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:21.869Z,1516411761.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:22.220Z,1516411762.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:22.242Z,1516411762.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:22.624Z,1516411762.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:22.643Z,1516411762.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:23.025Z,1516411763.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:23.039Z,1516411763.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:23.425Z,1516411763.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:23.439Z,1516411763.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:23.826Z,1516411763.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:23.840Z,1516411763.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:24.226Z,1516411764.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:24.241Z,1516411764.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:24.638Z,1516411764.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:24.668Z,1516411764.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:25.027Z,1516411765.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:25.115Z,1516411765.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:25.423Z,1516411765.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:25.445Z,1516411765.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:25.828Z,1516411765.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:25.842Z,1516411765.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:26.222Z,1516411766.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:26.240Z,1516411766.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:26.629Z,1516411766.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:26.650Z,1516411766.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:27.033Z,1516411767.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:27.047Z,1516411767.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:27.434Z,1516411767.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:27.448Z,1516411767.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:27.829Z,1516411767.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:27.852Z,1516411767.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:28.228Z,1516411768.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:28.247Z,1516411768.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:28.618Z,1516411768.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:28.644Z,1516411768.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:29.020Z,1516411769.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:29.047Z,1516411769.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:29.412Z,1516411769.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:29.438Z,1516411769.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:29.819Z,1516411769.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:29.851Z,1516411769.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:30.222Z,1516411770.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:30.252Z,1516411770.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:30.643Z,1516411770.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:30.657Z,1516411770.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:31.026Z,1516411771.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:31.067Z,1516411771.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:31.419Z,1516411771.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:31.457Z,1516411771.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:31.823Z,1516411771.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:31.858Z,1516411771.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:32.220Z,1516411772.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:32.234Z,1516411772.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:32.623Z,1516411772.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:32.637Z,1516411772.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:33.034Z,1516411773.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:33.066Z,1516411773.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:33.442Z,1516411773.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:33.468Z,1516411773.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:33.826Z,1516411773.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:33.864Z,1516411773.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:34.224Z,1516411774.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:34.238Z,1516411774.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:34.620Z,1516411774.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:34.639Z,1516411774.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:35.034Z,1516411775.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:35.065Z,1516411775.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:35.426Z,1516411775.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:35.440Z,1516411775.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:35.834Z,1516411775.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:35.863Z,1516411775.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:36.218Z,1516411776.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:36.232Z,1516411776.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:36.614Z,1516411776.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:36.676Z,1516411776.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:37.024Z,1516411777.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:37.043Z,1516411777.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:37.421Z,1516411777.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:37.438Z,1516411777.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:37.828Z,1516411777.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:37.842Z,1516411777.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:38.233Z,1516411778.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:38.247Z,1516411778.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:38.633Z,1516411778.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:38.647Z,1516411778.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:39.033Z,1516411779.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:39.047Z,1516411779.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:39.428Z,1516411779.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:39.442Z,1516411779.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:39.821Z,1516411779.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:39.834Z,1516411779.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:40.218Z,1516411780.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:40.238Z,1516411780.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:40.619Z,1516411780.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:40.641Z,1516411780.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:41.031Z,1516411781.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:41.045Z,1516411781.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:41.435Z,1516411781.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:41.449Z,1516411781.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:41.833Z,1516411781.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:41.855Z,1516411781.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:42.222Z,1516411782.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:42.242Z,1516411782.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:42.629Z,1516411782.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:42.644Z,1516411782.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:43.033Z,1516411783.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:43.055Z,1516411783.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:43.434Z,1516411783.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:43.448Z,1516411783.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:43.833Z,1516411783.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:43.851Z,1516411783.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:44.224Z,1516411784.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:44.239Z,1516411784.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:44.621Z,1516411784.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:44.635Z,1516411784.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:45.033Z,1516411785.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:45.047Z,1516411785.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:45.431Z,1516411785.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:45.451Z,1516411785.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:45.833Z,1516411785.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:45.848Z,1516411785.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:46.228Z,1516411786.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:46.243Z,1516411786.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:46.623Z,1516411786.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:46.637Z,1516411786.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:47.030Z,1516411787.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:47.044Z,1516411787.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:47.434Z,1516411787.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:47.448Z,1516411787.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:47.833Z,1516411787.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:47.847Z,1516411787.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:48.224Z,1516411788.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:48.242Z,1516411788.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:48.627Z,1516411788.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:48.647Z,1516411788.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:49.032Z,1516411789.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:49.051Z,1516411789.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:49.434Z,1516411789.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:49.448Z,1516411789.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:49.833Z,1516411789.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:49.851Z,1516411789.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:50.228Z,1516411790.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:50.242Z,1516411790.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:50.620Z,1516411790.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:50.634Z,1516411790.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:51.032Z,1516411791.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:51.051Z,1516411791.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:51.434Z,1516411791.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:51.448Z,1516411791.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:51.833Z,1516411791.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:51.847Z,1516411791.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:52.228Z,1516411792.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:52.243Z,1516411792.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:52.623Z,1516411792.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:52.637Z,1516411792.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:53.030Z,1516411793.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:53.044Z,1516411793.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:53.434Z,1516411793.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:53.448Z,1516411793.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:53.833Z,1516411793.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:53.847Z,1516411793.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:54.220Z,1516411794.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:54.238Z,1516411794.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:54.626Z,1516411794.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:54.640Z,1516411794.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:55.032Z,1516411795.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:55.051Z,1516411795.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:55.434Z,1516411795.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:55.448Z,1516411795.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:55.832Z,1516411795.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:55.851Z,1516411795.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:56.228Z,1516411796.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:56.242Z,1516411796.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:56.620Z,1516411796.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:56.634Z,1516411796.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:57.033Z,1516411797.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:57.055Z,1516411797.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:57.434Z,1516411797.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:57.448Z,1516411797.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:57.833Z,1516411797.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:57.847Z,1516411797.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:58.228Z,1516411798.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:58.242Z,1516411798.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:58.623Z,1516411798.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:58.637Z,1516411798.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:59.035Z,1516411799.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:59.093Z,1516411799.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:59.434Z,1516411799.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:59.448Z,1516411799.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:29:59.833Z,1516411799.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:29:59.847Z,1516411799.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:00.229Z,1516411800.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:00.242Z,1516411800.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:00.627Z,1516411800.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:00.647Z,1516411800.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:01.032Z,1516411801.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:01.051Z,1516411801.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:01.434Z,1516411801.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:01.448Z,1516411801.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:01.833Z,1516411801.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:01.847Z,1516411801.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:02.222Z,1516411802.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:02.240Z,1516411802.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:02.620Z,1516411802.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:02.638Z,1516411802.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:03.032Z,1516411803.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:03.051Z,1516411803.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:03.434Z,1516411803.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:03.448Z,1516411803.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:03.834Z,1516411803.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:03.848Z,1516411803.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:04.228Z,1516411804.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:04.243Z,1516411804.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:04.628Z,1516411804.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:04.642Z,1516411804.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:05.032Z,1516411805.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:05.046Z,1516411805.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:05.434Z,1516411805.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:05.448Z,1516411805.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:05.833Z,1516411805.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:05.847Z,1516411805.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:06.230Z,1516411806.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:06.243Z,1516411806.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:06.621Z,1516411806.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:06.639Z,1516411806.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:07.033Z,1516411807.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:07.047Z,1516411807.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:07.434Z,1516411807.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:07.448Z,1516411807.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:07.830Z,1516411807.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:07.844Z,1516411807.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:08.229Z,1516411808.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:08.243Z,1516411808.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:08.626Z,1516411808.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:08.640Z,1516411808.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:09.034Z,1516411809.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:09.048Z,1516411809.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:09.433Z,1516411809.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:09.447Z,1516411809.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:09.834Z,1516411809.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:09.848Z,1516411809.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:10.228Z,1516411810.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:10.243Z,1516411810.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:10.628Z,1516411810.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:10.648Z,1516411810.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:11.030Z,1516411811.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:11.045Z,1516411811.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:11.433Z,1516411811.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:11.448Z,1516411811.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:11.832Z,1516411811.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:11.855Z,1516411811.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:12.221Z,1516411812.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:12.235Z,1516411812.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:12.621Z,1516411812.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:12.635Z,1516411812.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:13.027Z,1516411813.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:13.047Z,1516411813.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:13.433Z,1516411813.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:13.447Z,1516411813.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:13.450Z,1516411813.450 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T01:30:13.450Z,1516411813.450 [Default:CheckIn:C.Wait] Stopped
2018-01-20T01:30:13.450Z,1516411813.450 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T01:30:13.451Z,1516411813.451 [Default:CheckIn:D] Running Loop=1
2018-01-20T01:30:13.833Z,1516411813.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:13.847Z,1516411813.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:13.850Z,1516411813.850 [Default:CheckIn:D] Stopped
2018-01-20T01:30:13.850Z,1516411813.850 [Default:CheckIn:E] Running Loop=1
2018-01-20T01:30:14.233Z,1516411814.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:14.247Z,1516411814.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:14.251Z,1516411814.251 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.829761 min 
2018-01-20T01:30:14.251Z,1516411814.251 [Default:CheckIn:E] Stopped
2018-01-20T01:30:14.251Z,1516411814.251 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T01:30:14.251Z,1516411814.251 [Default:CheckIn] Stopped
2018-01-20T01:30:14.251Z,1516411814.251 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T01:30:14.251Z,1516411814.251 [Default:CheckIn](INFO): Running loop #5
2018-01-20T01:30:14.251Z,1516411814.251 [Default:CheckIn] Running Loop=5
2018-01-20T01:30:14.252Z,1516411814.252 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T01:30:14.252Z,1516411814.252 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T01:30:14.625Z,1516411814.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:14.642Z,1516411814.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:15.028Z,1516411815.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:15.047Z,1516411815.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:18.146Z,1516411818.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:18.160Z,1516411818.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:18.260Z,1516411818.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:18.291Z,1516411818.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:18.666Z,1516411818.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:18.692Z,1516411818.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:19.066Z,1516411819.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:19.093Z,1516411819.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:19.462Z,1516411819.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:19.487Z,1516411819.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:19.851Z,1516411819.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:19.887Z,1516411819.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:20.260Z,1516411820.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:20.296Z,1516411820.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:20.649Z,1516411820.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:20.663Z,1516411820.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:21.066Z,1516411821.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:21.089Z,1516411821.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:21.470Z,1516411821.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:21.494Z,1516411821.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:21.870Z,1516411821.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:21.899Z,1516411821.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:22.262Z,1516411822.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:22.292Z,1516411822.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:22.653Z,1516411822.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:22.667Z,1516411822.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:23.064Z,1516411823.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:23.090Z,1516411823.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:23.474Z,1516411823.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:23.503Z,1516411823.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:23.863Z,1516411823.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:23.877Z,1516411823.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:24.253Z,1516411824.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:24.273Z,1516411824.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:24.659Z,1516411824.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:24.675Z,1516411824.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:25.075Z,1516411825.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:25.098Z,1516411825.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:25.464Z,1516411825.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:25.480Z,1516411825.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:25.874Z,1516411825.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:25.903Z,1516411825.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:26.261Z,1516411826.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:26.275Z,1516411826.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:26.650Z,1516411826.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:26.669Z,1516411826.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:27.066Z,1516411827.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:27.080Z,1516411827.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:27.466Z,1516411827.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:27.480Z,1516411827.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:27.874Z,1516411827.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:27.904Z,1516411827.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:28.258Z,1516411828.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:28.273Z,1516411828.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:28.656Z,1516411828.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:28.670Z,1516411828.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:29.062Z,1516411829.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:29.077Z,1516411829.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:29.466Z,1516411829.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:29.480Z,1516411829.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:29.874Z,1516411829.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:29.904Z,1516411829.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:30.258Z,1516411830.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:30.272Z,1516411830.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:30.660Z,1516411830.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:30.675Z,1516411830.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:31.074Z,1516411831.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:31.104Z,1516411831.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:31.459Z,1516411831.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:31.479Z,1516411831.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:31.874Z,1516411831.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:31.904Z,1516411831.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:32.259Z,1516411832.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:32.277Z,1516411832.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:32.652Z,1516411832.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:32.678Z,1516411832.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:33.066Z,1516411833.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:33.081Z,1516411833.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:33.466Z,1516411833.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:33.486Z,1516411833.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:33.866Z,1516411833.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:33.881Z,1516411833.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:34.263Z,1516411834.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:34.277Z,1516411834.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:34.660Z,1516411834.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:34.675Z,1516411834.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:35.066Z,1516411835.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:35.080Z,1516411835.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:35.470Z,1516411835.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:35.484Z,1516411835.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:35.867Z,1516411835.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:35.881Z,1516411835.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:36.257Z,1516411836.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:36.271Z,1516411836.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:36.662Z,1516411836.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:36.676Z,1516411836.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:37.065Z,1516411837.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:37.080Z,1516411837.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:37.466Z,1516411837.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:37.481Z,1516411837.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:37.866Z,1516411837.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:37.880Z,1516411837.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:38.267Z,1516411838.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:38.281Z,1516411838.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:38.654Z,1516411838.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:38.677Z,1516411838.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:39.062Z,1516411839.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:39.076Z,1516411839.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:39.459Z,1516411839.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:39.479Z,1516411839.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:39.863Z,1516411839.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:39.883Z,1516411839.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:40.269Z,1516411840.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:40.283Z,1516411840.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:40.671Z,1516411840.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:40.685Z,1516411840.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:41.069Z,1516411841.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:41.083Z,1516411841.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:41.459Z,1516411841.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:41.473Z,1516411841.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:41.859Z,1516411841.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:41.879Z,1516411841.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:42.264Z,1516411842.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:42.278Z,1516411842.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:42.664Z,1516411842.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:42.678Z,1516411842.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:43.060Z,1516411843.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:43.075Z,1516411843.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:43.469Z,1516411843.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:43.483Z,1516411843.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:43.870Z,1516411843.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:43.884Z,1516411843.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:44.270Z,1516411844.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:44.284Z,1516411844.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:44.654Z,1516411844.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:44.676Z,1516411844.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:45.071Z,1516411845.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:45.091Z,1516411845.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:45.465Z,1516411845.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:45.480Z,1516411845.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:45.847Z,1516411845.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:45.879Z,1516411845.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:46.271Z,1516411846.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:46.291Z,1516411846.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:46.674Z,1516411846.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:46.688Z,1516411846.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:47.074Z,1516411847.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:47.088Z,1516411847.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:47.458Z,1516411847.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:47.487Z,1516411847.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:47.866Z,1516411847.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:47.880Z,1516411847.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:48.252Z,1516411848.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:48.283Z,1516411848.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:48.667Z,1516411848.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:48.682Z,1516411848.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:49.052Z,1516411849.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:49.087Z,1516411849.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:49.475Z,1516411849.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:49.489Z,1516411849.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:49.883Z,1516411849.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:49.903Z,1516411849.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:50.276Z,1516411850.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:50.291Z,1516411850.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:50.647Z,1516411850.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:50.663Z,1516411850.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:51.051Z,1516411851.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:51.068Z,1516411851.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:51.457Z,1516411851.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:51.471Z,1516411851.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:51.856Z,1516411851.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:51.875Z,1516411851.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:52.270Z,1516411852.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:52.301Z,1516411852.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:52.670Z,1516411852.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:52.701Z,1516411852.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:53.070Z,1516411853.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:53.105Z,1516411853.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:53.459Z,1516411853.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:53.479Z,1516411853.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:53.860Z,1516411853.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:53.874Z,1516411853.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:54.260Z,1516411854.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:54.275Z,1516411854.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:54.661Z,1516411854.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:54.683Z,1516411854.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:55.064Z,1516411855.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:55.077Z,1516411855.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:55.466Z,1516411855.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:55.481Z,1516411855.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:55.870Z,1516411855.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:55.884Z,1516411855.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:56.265Z,1516411856.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:56.283Z,1516411856.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:56.664Z,1516411856.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:56.678Z,1516411856.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:57.065Z,1516411857.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:57.079Z,1516411857.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:57.464Z,1516411857.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:57.478Z,1516411857.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:57.865Z,1516411857.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:57.880Z,1516411857.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:58.278Z,1516411858.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:58.307Z,1516411858.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:58.666Z,1516411858.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:58.680Z,1516411858.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:59.066Z,1516411859.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:59.081Z,1516411859.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:59.467Z,1516411859.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:59.481Z,1516411859.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:30:59.864Z,1516411859.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:30:59.878Z,1516411859.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:00.263Z,1516411860.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:00.283Z,1516411860.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:00.662Z,1516411860.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:00.676Z,1516411860.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:01.061Z,1516411861.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:01.075Z,1516411861.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:01.471Z,1516411861.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:01.485Z,1516411861.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:01.871Z,1516411861.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:01.885Z,1516411861.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:02.267Z,1516411862.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:02.281Z,1516411862.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:02.667Z,1516411862.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:02.683Z,1516411862.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:03.060Z,1516411863.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:03.079Z,1516411863.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:03.461Z,1516411863.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:03.475Z,1516411863.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:03.859Z,1516411863.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:03.874Z,1516411863.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:04.270Z,1516411864.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:04.284Z,1516411864.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:04.669Z,1516411864.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:04.684Z,1516411864.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:05.066Z,1516411865.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:05.082Z,1516411865.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:05.463Z,1516411865.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:05.477Z,1516411865.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:05.855Z,1516411865.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:05.886Z,1516411865.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:06.266Z,1516411866.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:06.280Z,1516411866.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:06.661Z,1516411866.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:06.675Z,1516411866.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:07.060Z,1516411867.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:07.074Z,1516411867.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:07.468Z,1516411867.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:07.483Z,1516411867.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:07.870Z,1516411867.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:07.884Z,1516411867.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:08.270Z,1516411868.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:08.308Z,1516411868.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:08.661Z,1516411868.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:08.675Z,1516411868.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:09.056Z,1516411869.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:09.087Z,1516411869.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:09.467Z,1516411869.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:09.481Z,1516411869.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:09.864Z,1516411869.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:09.883Z,1516411869.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:10.266Z,1516411870.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:10.281Z,1516411870.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:10.672Z,1516411870.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:10.686Z,1516411870.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:11.069Z,1516411871.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:11.083Z,1516411871.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:11.464Z,1516411871.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:11.483Z,1516411871.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:11.863Z,1516411871.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:11.877Z,1516411871.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:12.267Z,1516411872.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:12.281Z,1516411872.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:12.666Z,1516411872.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:12.680Z,1516411872.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:13.066Z,1516411873.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:13.080Z,1516411873.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:13.466Z,1516411873.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:13.481Z,1516411873.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:13.872Z,1516411873.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:13.886Z,1516411873.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:14.268Z,1516411874.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:14.282Z,1516411874.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:14.662Z,1516411874.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:14.676Z,1516411874.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:15.065Z,1516411875.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:15.083Z,1516411875.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:18.155Z,1516411878.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:18.175Z,1516411878.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:18.280Z,1516411878.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:18.311Z,1516411878.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:18.642Z,1516411878.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:18.682Z,1516411878.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:19.042Z,1516411879.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:19.070Z,1516411879.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:19.438Z,1516411879.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:19.464Z,1516411879.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:19.827Z,1516411879.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:19.864Z,1516411879.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:20.229Z,1516411880.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:20.243Z,1516411880.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:20.625Z,1516411880.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:20.639Z,1516411880.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:21.031Z,1516411881.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:21.067Z,1516411881.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:21.444Z,1516411881.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:21.470Z,1516411881.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:21.847Z,1516411881.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:21.890Z,1516411881.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:22.242Z,1516411882.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:22.275Z,1516411882.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:22.630Z,1516411882.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:22.643Z,1516411882.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:23.029Z,1516411883.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:23.051Z,1516411883.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:23.430Z,1516411883.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:23.444Z,1516411883.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:23.828Z,1516411883.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:23.842Z,1516411883.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:24.246Z,1516411884.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:24.276Z,1516411884.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:24.642Z,1516411884.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:24.676Z,1516411884.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:25.038Z,1516411885.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:25.058Z,1516411885.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:25.420Z,1516411885.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:25.450Z,1516411885.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:25.835Z,1516411885.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:25.849Z,1516411885.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:26.233Z,1516411886.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:26.248Z,1516411886.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:26.635Z,1516411886.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:26.649Z,1516411886.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:27.035Z,1516411887.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:27.049Z,1516411887.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:27.438Z,1516411887.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:27.452Z,1516411887.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:27.836Z,1516411887.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:27.853Z,1516411887.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:28.238Z,1516411888.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:28.253Z,1516411888.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:28.635Z,1516411888.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:28.650Z,1516411888.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:29.022Z,1516411889.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:29.044Z,1516411889.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:29.430Z,1516411889.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:29.448Z,1516411889.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:29.835Z,1516411889.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:29.849Z,1516411889.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:30.236Z,1516411890.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:30.255Z,1516411890.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:30.642Z,1516411890.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:30.656Z,1516411890.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:31.038Z,1516411891.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:31.062Z,1516411891.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:31.421Z,1516411891.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:31.442Z,1516411891.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:31.831Z,1516411891.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:31.845Z,1516411891.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:32.228Z,1516411892.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:32.241Z,1516411892.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:32.624Z,1516411892.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:32.645Z,1516411892.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:33.035Z,1516411893.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:33.049Z,1516411893.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:33.438Z,1516411893.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:33.452Z,1516411893.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:33.839Z,1516411893.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:33.865Z,1516411893.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:34.245Z,1516411894.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:34.261Z,1516411894.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:34.637Z,1516411894.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:34.651Z,1516411894.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:35.029Z,1516411895.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:35.051Z,1516411895.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:35.424Z,1516411895.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:35.459Z,1516411895.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:35.828Z,1516411895.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:35.855Z,1516411895.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:36.247Z,1516411896.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:36.261Z,1516411896.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:36.647Z,1516411896.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:36.661Z,1516411896.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:37.040Z,1516411897.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:37.053Z,1516411897.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:37.422Z,1516411897.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:37.453Z,1516411897.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:37.828Z,1516411897.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:37.863Z,1516411897.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:38.219Z,1516411898.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:38.256Z,1516411898.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:38.629Z,1516411898.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:38.655Z,1516411898.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:39.023Z,1516411899.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:39.059Z,1516411899.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:39.449Z,1516411899.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:39.462Z,1516411899.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:39.851Z,1516411899.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:39.871Z,1516411899.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:40.242Z,1516411900.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:40.257Z,1516411900.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:40.619Z,1516411900.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:40.656Z,1516411900.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:41.027Z,1516411901.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:41.052Z,1516411901.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:41.424Z,1516411901.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:41.454Z,1516411901.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:41.819Z,1516411901.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:41.856Z,1516411901.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:42.247Z,1516411902.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:42.264Z,1516411902.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:42.650Z,1516411902.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:42.664Z,1516411902.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:43.029Z,1516411903.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:43.059Z,1516411903.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:43.059Z,1516411903.059 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2018-01-20T01:31:43.059Z,1516411903.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:31:43.061Z,1516411903.061 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:43.061Z,1516411903.061 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2018-01-20T01:31:43.061Z,1516411903.061 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:31:43.063Z,1516411903.063 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:43.063Z,1516411903.063 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 87
2018-01-20T01:31:43.063Z,1516411903.063 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:31:43.074Z,1516411903.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:31:43.074Z,1516411903.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:31:43.075Z,1516411903.075 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:31:43.423Z,1516411903.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:43.464Z,1516411903.464 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:31:43.464Z,1516411903.464 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2018-01-20T01:31:43.465Z,1516411903.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:31:43.465Z,1516411903.465 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2018-01-20T01:31:43.466Z,1516411903.466 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:31:43.466Z,1516411903.466 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 87
2018-01-20T01:31:43.831Z,1516411903.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:43.855Z,1516411903.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:31:43.855Z,1516411903.855 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:31:43.856Z,1516411903.856 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:31:43.856Z,1516411903.856 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:31:43.857Z,1516411903.857 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:31:43.857Z,1516411903.857 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:31:43.857Z,1516411903.857 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:31:43.858Z,1516411903.858 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:31:43.858Z,1516411903.858 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:31:44.223Z,1516411904.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:44.259Z,1516411904.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:31:44.260Z,1516411904.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:44.628Z,1516411904.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:44.658Z,1516411904.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:31:44.659Z,1516411904.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:45.027Z,1516411905.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:45.057Z,1516411905.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:31:45.058Z,1516411905.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:45.434Z,1516411905.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:45.470Z,1516411905.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:31:45.471Z,1516411905.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:45.834Z,1516411905.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:45.867Z,1516411905.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:31:45.868Z,1516411905.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:46.234Z,1516411906.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:46.267Z,1516411906.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:31:46.267Z,1516411906.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:46.619Z,1516411906.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:46.662Z,1516411906.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:31:46.663Z,1516411906.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:47.027Z,1516411907.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:47.057Z,1516411907.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:31:47.058Z,1516411907.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:47.424Z,1516411907.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:47.450Z,1516411907.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:31:47.451Z,1516411907.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:47.827Z,1516411907.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:47.840Z,1516411907.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:31:47.867Z,1516411907.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:48.234Z,1516411908.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:48.258Z,1516411908.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:31:48.259Z,1516411908.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:48.638Z,1516411908.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:48.670Z,1516411908.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:31:48.671Z,1516411908.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:49.038Z,1516411909.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:49.063Z,1516411909.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:31:49.064Z,1516411909.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:49.421Z,1516411909.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:49.435Z,1516411909.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T01:31:49.436Z,1516411909.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:49.827Z,1516411909.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:49.862Z,1516411909.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:31:49.863Z,1516411909.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:50.231Z,1516411910.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:50.244Z,1516411910.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:31:50.245Z,1516411910.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:50.625Z,1516411910.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:50.642Z,1516411910.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:31:50.643Z,1516411910.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:51.039Z,1516411911.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:51.069Z,1516411911.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:31:51.070Z,1516411911.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:51.446Z,1516411911.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:51.477Z,1516411911.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:31:51.478Z,1516411911.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:51.842Z,1516411911.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:51.856Z,1516411911.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:31:51.877Z,1516411911.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:52.246Z,1516411912.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:52.260Z,1516411912.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:31:52.277Z,1516411912.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:52.635Z,1516411912.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:52.649Z,1516411912.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:31:52.650Z,1516411912.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:53.035Z,1516411913.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:53.049Z,1516411913.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:31:53.050Z,1516411913.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:53.430Z,1516411913.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:53.448Z,1516411913.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:31:53.449Z,1516411913.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:53.826Z,1516411913.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:53.850Z,1516411913.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:31:53.851Z,1516411913.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:54.238Z,1516411914.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:54.252Z,1516411914.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:31:54.253Z,1516411914.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:54.642Z,1516411914.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:54.656Z,1516411914.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:31:54.657Z,1516411914.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:55.038Z,1516411915.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:55.058Z,1516411915.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:31:55.059Z,1516411915.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:55.429Z,1516411915.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:55.443Z,1516411915.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:31:55.444Z,1516411915.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:55.831Z,1516411915.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:55.845Z,1516411915.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:31:55.846Z,1516411915.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:56.237Z,1516411916.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:56.251Z,1516411916.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:31:56.252Z,1516411916.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:56.634Z,1516411916.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:56.656Z,1516411916.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:31:56.661Z,1516411916.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:57.040Z,1516411917.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:57.058Z,1516411917.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:31:57.059Z,1516411917.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:57.436Z,1516411917.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:57.450Z,1516411917.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:31:57.451Z,1516411917.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:57.835Z,1516411917.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:57.854Z,1516411917.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:31:57.855Z,1516411917.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:58.240Z,1516411918.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:58.258Z,1516411918.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:31:58.259Z,1516411918.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:58.642Z,1516411918.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:58.655Z,1516411918.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:31:58.656Z,1516411918.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:59.041Z,1516411919.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:59.054Z,1516411919.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:31:59.055Z,1516411919.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:59.430Z,1516411919.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:59.448Z,1516411919.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:31:59.449Z,1516411919.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:31:59.828Z,1516411919.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:31:59.846Z,1516411919.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:31:59.847Z,1516411919.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:00.242Z,1516411920.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:00.256Z,1516411920.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:32:00.256Z,1516411920.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:00.642Z,1516411920.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:00.656Z,1516411920.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:32:00.657Z,1516411920.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:01.039Z,1516411921.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:01.058Z,1516411921.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:32:01.059Z,1516411921.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:01.430Z,1516411921.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:01.444Z,1516411921.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:32:01.445Z,1516411921.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:01.826Z,1516411921.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:01.848Z,1516411921.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:32:01.854Z,1516411921.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:02.246Z,1516411922.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:02.260Z,1516411922.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:32:02.261Z,1516411922.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:02.637Z,1516411922.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:02.655Z,1516411922.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:32:02.656Z,1516411922.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:03.041Z,1516411923.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:03.055Z,1516411923.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T01:32:03.056Z,1516411923.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:03.441Z,1516411923.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:03.455Z,1516411923.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:03.830Z,1516411923.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:03.848Z,1516411923.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:04.242Z,1516411924.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:04.256Z,1516411924.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:04.646Z,1516411924.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:04.659Z,1516411924.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:05.044Z,1516411925.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:05.058Z,1516411925.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:05.437Z,1516411925.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:05.451Z,1516411925.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:05.819Z,1516411925.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:05.855Z,1516411925.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:06.245Z,1516411926.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:06.259Z,1516411926.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:06.645Z,1516411926.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:06.659Z,1516411926.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:07.046Z,1516411927.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:07.066Z,1516411927.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:07.431Z,1516411927.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:07.446Z,1516411927.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:07.826Z,1516411927.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:07.848Z,1516411927.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:08.243Z,1516411928.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:08.257Z,1516411928.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:08.642Z,1516411928.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:08.656Z,1516411928.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:09.043Z,1516411929.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:09.067Z,1516411929.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:09.437Z,1516411929.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:09.450Z,1516411929.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:09.829Z,1516411929.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:09.846Z,1516411929.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:10.242Z,1516411930.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:10.256Z,1516411930.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:10.646Z,1516411930.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:10.659Z,1516411930.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:11.042Z,1516411931.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:11.056Z,1516411931.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:11.436Z,1516411931.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:11.450Z,1516411931.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:11.819Z,1516411931.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:11.852Z,1516411931.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:12.247Z,1516411932.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:12.267Z,1516411932.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:12.645Z,1516411932.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:12.659Z,1516411932.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:13.047Z,1516411933.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:13.060Z,1516411933.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:13.426Z,1516411933.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:13.452Z,1516411933.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:13.825Z,1516411933.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:13.851Z,1516411933.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:14.241Z,1516411934.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:14.262Z,1516411934.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:14.638Z,1516411934.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:14.660Z,1516411934.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:15.043Z,1516411935.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:15.058Z,1516411935.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:15.421Z,1516411935.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:15.456Z,1516411935.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:18.520Z,1516411938.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:18.547Z,1516411938.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:18.651Z,1516411938.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:18.696Z,1516411938.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:19.010Z,1516411939.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:19.024Z,1516411939.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:19.417Z,1516411939.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:19.450Z,1516411939.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:19.804Z,1516411939.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:19.818Z,1516411939.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:20.203Z,1516411940.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:20.217Z,1516411940.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:20.604Z,1516411940.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:20.618Z,1516411940.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:21.005Z,1516411941.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:21.019Z,1516411941.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:21.418Z,1516411941.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:21.447Z,1516411941.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:21.806Z,1516411941.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:21.820Z,1516411941.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:22.218Z,1516411942.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:22.247Z,1516411942.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:22.601Z,1516411942.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:22.627Z,1516411942.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:23.008Z,1516411943.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:23.022Z,1516411943.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:23.401Z,1516411943.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:23.415Z,1516411943.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:23.802Z,1516411943.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:23.821Z,1516411943.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:24.201Z,1516411944.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:24.218Z,1516411944.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:24.613Z,1516411944.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:24.628Z,1516411944.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:25.013Z,1516411945.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:25.035Z,1516411945.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:25.413Z,1516411945.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:25.427Z,1516411945.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:25.807Z,1516411945.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:25.827Z,1516411945.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:26.203Z,1516411946.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:26.223Z,1516411946.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:26.601Z,1516411946.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:26.618Z,1516411946.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:27.007Z,1516411947.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:27.027Z,1516411947.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:27.412Z,1516411947.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:27.431Z,1516411947.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:27.813Z,1516411947.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:27.827Z,1516411947.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:28.209Z,1516411948.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:28.223Z,1516411948.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:28.602Z,1516411948.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:28.620Z,1516411948.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:28.000Z,1516411949.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:29.014Z,1516411949.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:29.401Z,1516411949.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:29.415Z,1516411949.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:29.802Z,1516411949.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:29.821Z,1516411949.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:30.200Z,1516411950.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:30.218Z,1516411950.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:30.609Z,1516411950.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:30.623Z,1516411950.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:31.014Z,1516411951.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:31.028Z,1516411951.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:31.419Z,1516411951.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:31.451Z,1516411951.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:31.807Z,1516411951.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:31.827Z,1516411951.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:32.202Z,1516411952.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:32.227Z,1516411952.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:32.600Z,1516411952.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:32.626Z,1516411952.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:32.999Z,1516411952.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:33.024Z,1516411953.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:33.414Z,1516411953.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:33.428Z,1516411953.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:33.814Z,1516411953.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:33.828Z,1516411953.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:34.218Z,1516411954.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:34.232Z,1516411954.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:34.595Z,1516411954.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:34.626Z,1516411954.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:34.991Z,1516411954.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:35.023Z,1516411955.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:35.393Z,1516411955.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:35.426Z,1516411955.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:35.796Z,1516411955.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:35.826Z,1516411955.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:36.191Z,1516411956.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:36.223Z,1516411956.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:36.606Z,1516411956.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:36.627Z,1516411956.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:37.017Z,1516411957.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:37.031Z,1516411957.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:37.411Z,1516411957.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:37.430Z,1516411957.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:37.799Z,1516411957.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:37.825Z,1516411957.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:38.195Z,1516411958.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:38.220Z,1516411958.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:38.592Z,1516411958.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:38.627Z,1516411958.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:38.999Z,1516411958.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:39.031Z,1516411959.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:39.418Z,1516411959.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:39.432Z,1516411959.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:39.819Z,1516411959.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:39.838Z,1516411959.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:40.223Z,1516411960.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:40.243Z,1516411960.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:40.600Z,1516411960.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:40.625Z,1516411960.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:40.992Z,1516411960.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:41.023Z,1516411961.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:41.394Z,1516411961.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:41.420Z,1516411961.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:41.801Z,1516411961.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:41.826Z,1516411961.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:42.191Z,1516411962.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:42.230Z,1516411962.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:42.602Z,1516411962.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:42.639Z,1516411962.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:43.022Z,1516411963.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:43.036Z,1516411963.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:43.402Z,1516411963.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:43.436Z,1516411963.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:43.799Z,1516411963.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:43.831Z,1516411963.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:44.195Z,1516411964.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:44.231Z,1516411964.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:44.600Z,1516411964.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:44.631Z,1516411964.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:44.993Z,1516411964.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:45.007Z,1516411965.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:45.378Z,1516411965.378 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T01:32:45.378Z,1516411965.378 [NAL9602] Data Fault, FailCount= 4
2018-01-20T01:32:45.378Z,1516411965.378 [NAL9602](ERROR): Data Fault
2018-01-20T01:32:45.396Z,1516411965.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:45.410Z,1516411965.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:45.447Z,1516411965.447 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T01:32:45.778Z,1516411965.778 [NAL9602](INFO): Powering down
2018-01-20T01:32:45.796Z,1516411965.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:45.810Z,1516411965.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:46.202Z,1516411966.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:46.216Z,1516411966.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:46.601Z,1516411966.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:46.618Z,1516411966.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:46.656Z,1516411966.656 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T01:32:46.656Z,1516411966.656 [NAL9602] No Fault, FailCount= 4
2018-01-20T01:32:47.001Z,1516411967.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:47.015Z,1516411967.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:47.397Z,1516411967.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:47.411Z,1516411967.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:47.805Z,1516411967.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:47.819Z,1516411967.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:48.196Z,1516411968.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:48.220Z,1516411968.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:48.599Z,1516411968.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:48.613Z,1516411968.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:49.005Z,1516411969.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:49.019Z,1516411969.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:49.401Z,1516411969.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:49.415Z,1516411969.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:49.802Z,1516411969.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:49.816Z,1516411969.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:50.202Z,1516411970.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:50.216Z,1516411970.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:50.602Z,1516411970.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:50.616Z,1516411970.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:50.000Z,1516411971.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:51.014Z,1516411971.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:51.406Z,1516411971.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:51.419Z,1516411971.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:51.801Z,1516411971.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:51.815Z,1516411971.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:52.202Z,1516411972.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:52.216Z,1516411972.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:52.598Z,1516411972.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:52.613Z,1516411972.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:52.998Z,1516411972.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:53.013Z,1516411973.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:53.399Z,1516411973.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:53.415Z,1516411973.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:53.802Z,1516411973.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:53.816Z,1516411973.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:54.198Z,1516411974.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:54.219Z,1516411974.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:54.596Z,1516411974.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:54.610Z,1516411974.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:54.998Z,1516411974.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:55.018Z,1516411975.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:55.400Z,1516411975.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:55.414Z,1516411975.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:55.800Z,1516411975.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:55.815Z,1516411975.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:56.201Z,1516411976.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:56.214Z,1516411976.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:56.604Z,1516411976.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:56.618Z,1516411976.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:57.001Z,1516411977.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:57.015Z,1516411977.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:57.398Z,1516411977.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:57.412Z,1516411977.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:57.798Z,1516411977.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:57.812Z,1516411977.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:58.204Z,1516411978.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:58.219Z,1516411978.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:58.605Z,1516411978.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:58.618Z,1516411978.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:58.000Z,1516411979.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:59.013Z,1516411979.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:59.400Z,1516411979.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:59.414Z,1516411979.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:32:59.804Z,1516411979.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:32:59.818Z,1516411979.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:00.204Z,1516411980.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:00.218Z,1516411980.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:00.594Z,1516411980.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:00.613Z,1516411980.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:01.000Z,1516411981.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:01.023Z,1516411981.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:01.400Z,1516411981.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:01.414Z,1516411981.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:01.799Z,1516411981.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:01.813Z,1516411981.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:02.198Z,1516411982.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:02.218Z,1516411982.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:02.607Z,1516411982.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:02.621Z,1516411982.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:03.007Z,1516411983.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:03.021Z,1516411983.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:03.407Z,1516411983.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:03.430Z,1516411983.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:03.804Z,1516411983.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:03.818Z,1516411983.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:04.199Z,1516411984.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:04.213Z,1516411984.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:04.603Z,1516411984.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:04.616Z,1516411984.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:05.001Z,1516411985.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:05.024Z,1516411985.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:05.392Z,1516411985.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:05.418Z,1516411985.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:05.799Z,1516411985.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:05.823Z,1516411985.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:06.198Z,1516411986.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:06.224Z,1516411986.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:06.588Z,1516411986.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:06.603Z,1516411986.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:06.999Z,1516411986.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:07.031Z,1516411987.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:07.399Z,1516411987.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:07.431Z,1516411987.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:07.799Z,1516411987.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:07.829Z,1516411987.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:08.199Z,1516411988.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:08.236Z,1516411988.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:08.599Z,1516411988.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:08.635Z,1516411988.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:08.999Z,1516411988.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:09.029Z,1516411989.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:09.399Z,1516411989.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:09.412Z,1516411989.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:09.795Z,1516411989.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:09.811Z,1516411989.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:10.202Z,1516411990.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:10.216Z,1516411990.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:10.603Z,1516411990.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:10.617Z,1516411990.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:10.997Z,1516411990.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:11.015Z,1516411991.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:11.402Z,1516411991.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:11.416Z,1516411991.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:11.802Z,1516411991.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:11.815Z,1516411991.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:12.203Z,1516411992.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:12.223Z,1516411992.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:12.602Z,1516411992.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:12.616Z,1516411992.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:13.003Z,1516411993.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:13.017Z,1516411993.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:13.403Z,1516411993.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:13.423Z,1516411993.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:13.800Z,1516411993.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:13.815Z,1516411993.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:14.198Z,1516411994.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:14.212Z,1516411994.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:14.605Z,1516411994.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:14.619Z,1516411994.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:15.005Z,1516411995.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:15.019Z,1516411995.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:15.405Z,1516411995.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:15.419Z,1516411995.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:15.788Z,1516411995.788 [NAL9602](INFO): Powering up NAL9602
2018-01-20T01:33:15.807Z,1516411995.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:15.827Z,1516411995.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:18.899Z,1516411998.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:18.914Z,1516411998.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:19.012Z,1516411999.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:19.058Z,1516411999.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:19.366Z,1516411999.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:19.381Z,1516411999.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:19.767Z,1516411999.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:19.782Z,1516411999.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:20.167Z,1516412000.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:20.181Z,1516412000.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:20.571Z,1516412000.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:20.611Z,1516412000.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:20.969Z,1516412000.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:20.982Z,1516412000.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:21.361Z,1516412001.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:21.376Z,1516412001.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:21.765Z,1516412001.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:21.786Z,1516412001.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:22.165Z,1516412002.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:22.179Z,1516412002.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:22.561Z,1516412002.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:22.575Z,1516412002.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:22.963Z,1516412002.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:22.976Z,1516412002.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:23.359Z,1516412003.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:23.392Z,1516412003.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:23.757Z,1516412003.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:23.783Z,1516412003.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:24.158Z,1516412004.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:24.184Z,1516412004.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:24.563Z,1516412004.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:24.589Z,1516412004.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:24.957Z,1516412004.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:24.979Z,1516412004.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:25.363Z,1516412005.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:25.388Z,1516412005.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:25.759Z,1516412005.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:25.792Z,1516412005.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:26.160Z,1516412006.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:26.190Z,1516412006.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:26.587Z,1516412006.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:26.601Z,1516412006.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:26.946Z,1516412006.946 [NAL9602](INFO): NAL9602 initialized
2018-01-20T01:33:26.963Z,1516412006.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:27.003Z,1516412007.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:27.364Z,1516412007.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:27.395Z,1516412007.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:27.775Z,1516412007.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:27.806Z,1516412007.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:28.190Z,1516412008.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:28.204Z,1516412008.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:28.579Z,1516412008.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:28.603Z,1516412008.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:28.961Z,1516412008.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:28.976Z,1516412008.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:29.359Z,1516412009.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:29.380Z,1516412009.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:29.764Z,1516412009.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:29.779Z,1516412009.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:30.165Z,1516412010.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:30.178Z,1516412010.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:30.578Z,1516412010.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:30.613Z,1516412010.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:30.982Z,1516412010.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:31.013Z,1516412011.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:31.378Z,1516412011.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:31.391Z,1516412011.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:31.767Z,1516412011.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:31.781Z,1516412011.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:32.167Z,1516412012.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:32.181Z,1516412012.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:32.573Z,1516412012.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:32.594Z,1516412012.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:32.969Z,1516412012.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:32.991Z,1516412012.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:33.374Z,1516412013.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:33.388Z,1516412013.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:33.774Z,1516412013.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:33.787Z,1516412013.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:34.174Z,1516412014.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:34.188Z,1516412014.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:34.568Z,1516412014.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:34.582Z,1516412014.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:34.970Z,1516412014.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:34.984Z,1516412014.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:35.368Z,1516412015.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:35.382Z,1516412015.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:35.768Z,1516412015.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:35.782Z,1516412015.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:36.167Z,1516412016.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:36.183Z,1516412016.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:36.574Z,1516412016.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:36.589Z,1516412016.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:36.974Z,1516412016.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:36.988Z,1516412016.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:37.386Z,1516412017.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:37.419Z,1516412017.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:37.768Z,1516412017.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:37.782Z,1516412017.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:38.170Z,1516412018.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:38.184Z,1516412018.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:38.569Z,1516412018.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:38.583Z,1516412018.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:38.972Z,1516412018.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:38.986Z,1516412018.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:39.374Z,1516412019.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:39.388Z,1516412019.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:39.778Z,1516412019.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:39.798Z,1516412019.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:40.174Z,1516412020.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:40.188Z,1516412020.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:40.568Z,1516412020.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:40.582Z,1516412020.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:40.975Z,1516412020.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:41.000Z,1516412021.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:41.376Z,1516412021.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:41.395Z,1516412021.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:41.760Z,1516412021.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:41.786Z,1516412021.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:42.177Z,1516412022.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:42.198Z,1516412022.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:42.582Z,1516412022.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:42.596Z,1516412022.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:42.982Z,1516412022.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:42.996Z,1516412022.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:43.387Z,1516412023.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:43.407Z,1516412023.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:43.763Z,1516412023.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:43.795Z,1516412023.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:44.160Z,1516412024.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:44.185Z,1516412024.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:44.564Z,1516412024.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:44.590Z,1516412024.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:44.961Z,1516412024.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:44.988Z,1516412024.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:45.382Z,1516412025.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:45.396Z,1516412025.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:45.789Z,1516412025.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:45.807Z,1516412025.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:46.179Z,1516412026.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:46.193Z,1516412026.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:46.559Z,1516412026.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:46.591Z,1516412026.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:46.980Z,1516412026.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:46.994Z,1516412026.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:47.361Z,1516412027.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:47.387Z,1516412027.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:47.760Z,1516412027.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:47.786Z,1516412027.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:48.159Z,1516412028.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:48.190Z,1516412028.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:48.583Z,1516412028.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:48.597Z,1516412028.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:48.980Z,1516412028.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:48.999Z,1516412028.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:49.383Z,1516412029.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:49.403Z,1516412029.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:49.761Z,1516412029.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:49.787Z,1516412029.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:50.159Z,1516412030.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:50.185Z,1516412030.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:50.560Z,1516412030.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:50.586Z,1516412030.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:50.963Z,1516412030.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:50.990Z,1516412030.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:51.378Z,1516412031.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:51.392Z,1516412031.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:51.790Z,1516412031.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:51.807Z,1516412031.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:52.183Z,1516412032.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:52.197Z,1516412032.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:52.559Z,1516412032.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:52.602Z,1516412032.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:52.956Z,1516412032.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:52.999Z,1516412032.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:53.354Z,1516412033.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:53.368Z,1516412033.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:53.761Z,1516412033.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:53.775Z,1516412033.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:54.161Z,1516412034.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:54.175Z,1516412034.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:54.570Z,1516412034.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:54.596Z,1516412034.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:54.974Z,1516412034.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:55.004Z,1516412035.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:55.378Z,1516412035.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:55.410Z,1516412035.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:55.768Z,1516412035.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:55.787Z,1516412035.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:56.161Z,1516412036.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:56.176Z,1516412036.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:56.561Z,1516412036.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:56.576Z,1516412036.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:56.964Z,1516412036.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:56.979Z,1516412036.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:57.378Z,1516412037.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:57.410Z,1516412037.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:57.782Z,1516412037.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:57.807Z,1516412037.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:58.166Z,1516412038.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:58.180Z,1516412038.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:58.564Z,1516412038.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:58.578Z,1516412038.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:58.967Z,1516412038.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:58.986Z,1516412038.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:59.358Z,1516412039.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:59.385Z,1516412039.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:33:59.769Z,1516412039.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:33:59.783Z,1516412039.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:00.168Z,1516412040.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:00.182Z,1516412040.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:00.569Z,1516412040.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:00.591Z,1516412040.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:00.982Z,1516412040.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:00.996Z,1516412040.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:01.374Z,1516412041.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:01.394Z,1516412041.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:01.772Z,1516412041.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:01.786Z,1516412041.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:02.168Z,1516412042.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:02.183Z,1516412042.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:02.570Z,1516412042.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:02.583Z,1516412042.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:02.972Z,1516412042.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:02.986Z,1516412042.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:03.374Z,1516412043.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:03.388Z,1516412043.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:03.786Z,1516412043.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:03.819Z,1516412043.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:04.173Z,1516412044.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:04.188Z,1516412044.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:04.573Z,1516412044.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:04.588Z,1516412044.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:04.970Z,1516412044.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:04.983Z,1516412044.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:05.360Z,1516412045.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:05.382Z,1516412045.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:05.770Z,1516412045.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:05.784Z,1516412045.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:06.175Z,1516412046.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:06.188Z,1516412046.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:06.579Z,1516412046.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:06.594Z,1516412046.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:06.978Z,1516412046.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:06.993Z,1516412046.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:07.379Z,1516412047.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:07.392Z,1516412047.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:07.772Z,1516412047.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:07.787Z,1516412047.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:08.172Z,1516412048.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:08.191Z,1516412048.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:08.571Z,1516412048.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:08.587Z,1516412048.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:08.972Z,1516412048.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:08.987Z,1516412048.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:09.378Z,1516412049.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:09.394Z,1516412049.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:09.777Z,1516412049.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:09.791Z,1516412049.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:10.177Z,1516412050.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:10.195Z,1516412050.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:10.571Z,1516412050.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:10.585Z,1516412050.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:10.975Z,1516412050.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:10.989Z,1516412050.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:11.368Z,1516412051.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:11.382Z,1516412051.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:11.772Z,1516412051.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:11.786Z,1516412051.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:12.171Z,1516412052.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:12.185Z,1516412052.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:12.575Z,1516412052.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:12.601Z,1516412052.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:12.981Z,1516412052.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:12.995Z,1516412052.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:13.382Z,1516412053.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:13.403Z,1516412053.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:13.756Z,1516412053.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:13.791Z,1516412053.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:14.159Z,1516412054.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:14.184Z,1516412054.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:14.560Z,1516412054.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:14.586Z,1516412054.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:14.976Z,1516412054.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:14.995Z,1516412054.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:15.382Z,1516412055.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:15.396Z,1516412055.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:15.790Z,1516412055.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:15.807Z,1516412055.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:16.179Z,1516412056.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:16.193Z,1516412056.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:19.263Z,1516412059.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:19.286Z,1516412059.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:19.387Z,1516412059.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:19.402Z,1516412059.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:19.759Z,1516412059.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:19.780Z,1516412059.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:20.115Z,1516412060.115 [DataOverHttps](IMPORTANT): SBD MTMSN=20180120T013125
2018-01-20T01:34:20.172Z,1516412060.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:20.186Z,1516412060.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:20.548Z,1516412060.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:20.583Z,1516412060.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:20.948Z,1516412060.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:21.027Z,1516412061.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:24.039Z,1516412064.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:24.053Z,1516412064.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:24.132Z,1516412064.132 [DataOverHttps](INFO): Received command:load Insert/AbortDrift.xml;set AbortDrift.AcousticTimeout 10 minute;run 
2018-01-20T01:34:24.143Z,1516412064.143 [CommandLine](IMPORTANT): got command load ./Missions/Insert/AbortDrift.xml
2018-01-20T01:34:24.143Z,1516412064.143 [MissionManager](INFO): Loading Mission: ./Missions/Insert/AbortDrift.xml
2018-01-20T01:34:24.195Z,1516412064.195 [MissionManager](INFO): DefineArg AbortDrift.AcousticTimeout = 96.000000 h
2018-01-20T01:34:24.197Z,1516412064.197 [MissionManager](INFO): DefineArg AbortDrift.FromLastAcousticReceiveToNow = nan h
2018-01-20T01:34:24.199Z,1516412064.199 [MissionManager](INFO): DefineArg AbortDrift.FromLastTimeFixToNow = nan h
2018-01-20T01:34:24.200Z,1516412064.200 [MissionManager](INFO): DefineArg AbortDrift.SyslogStop = 0 bool
2018-01-20T01:34:24.214Z,1516412064.214 [AbortDrift:D.Execute](DEBUG): Construct Execute.
2018-01-20T01:34:24.239Z,1516412064.239 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Aggregate xmlns="Tethys"
       xmlns:Guidance="Tethys/Guidance"
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="AbortDrift">

    <DefineArg Name="AcousticTimeout"><Description>
        Drifting for longer than this period without receiving any acoustic
        signals will trigger the abort.
    </Description><Units:hour/><Value>96</Value></DefineArg>

    <DefineArg Name="FromLastAcousticReceiveToNow"><Description>
        Elapsed time from last acoustic reception to now.
    </Description><Units:hour/><Value>NaN</Value></DefineArg>

    <DefineArg Name="FromLastTimeFixToNow"><Description>
        Elapsed time from last time_fix to now.
    </Description><Units:hour/><Value>NaN</Value></DefineArg>

    <DefineArg Name="SyslogStop"><Description>
        Flag of Syslog of stop.
    </Description><False/></DefineArg>

    <When>
        <Not><IsNaN>
            <Universal:acoustic_receive_time/>
        </IsNaN></Not>
        <And><Elapsed><Universal:acoustic_receive_time/></Elapsed><Gt><Arg Name="AcousticTimeout"/></Gt></And>
        <And><Elapsed><Universal:time_fix/></Elapsed><Gt><Arg Name="AcousticTimeout"/></Gt></And>
        <And><Not><Arg Name="SyslogStop"/></Not></And>
        <Or><IsNaN>
            <Universal:acoustic_receive_time/>
        </IsNaN><And><Elapsed><Universal:time_fix/></Elapsed><Gt><Arg Name="AcousticTimeout"/></Gt></And><And><Not><Arg Name="SyslogStop"/></Not></And></Or>
    </When>

    <Assign><Sequence/><Arg Name="FromLastTimeFixToNow"/><Elapsed><Universal:time_fix/></Elapsed></Assign>

    <Aggregate Id="TimeoutExpiredAcousticReceive">

        <Sequence/>

        <When>
            <Not><IsNaN>
                <Universal:acoustic_receive_time/>
            </IsNaN></Not>
        </When>

        <Assign><Sequence/><Arg Name="FromLastAcousticReceiveToNow"/><Elapsed><Universal:acoustic_receive_time/></Elapsed></Assign>

        <Syslog Severity="Important">Acoustic timeout <Arg Name="AcousticTimeout"/><Units:hour/> exceeded. Elapsed time since last acoustic reception = <Arg Name="FromLastAcousticReceiveToNow"/><Units:hour/>, Elapsed time since last time_fix = <Arg Name="FromLastTimeFixToNow"/><Units:hour/>. Aborting drift by executing stop command.</Syslog>

    </Aggregate>

    <Aggregate Id="TimeoutExpiredNoAcousticReceive">

        <Sequence/>

        <When>
            <IsNaN>
                <Universal:acoustic_receive_time/>
            </IsNaN>
        </When>

        <Syslog Severity="Important">Acoustic timeout <Arg Name="AcousticTimeout"/><Units:hour/> exceeded. No acoustic reception ever. Elapsed time since last time_fix = <Arg Name="FromLastTimeFixToNow"/><Units:hour/>. Aborting drift by executing stop command.</Syslog>

    </Aggregate>

    <Guidance:Execute>
        <Setting><Guidance:Execute.command/><String>stop</String></Setting>
    </Guidance:Execute>

    <Assign><Sequence/><Arg Name="SyslogStop"/><True/></Assign>

</Aggregate>


2018-01-20T01:34:24.239Z,1516412064.239 [CommandLine](IMPORTANT): Loaded ./Missions/Insert/AbortDrift.xml
2018-01-20T01:34:25.345Z,1516412065.345 [CommandLine](IMPORTANT): got command set AbortDrift.AcousticTimeout 10.000000 minute
2018-01-20T01:34:25.346Z,1516412065.346 [CommandLine](IMPORTANT): got command run 
2018-01-20T01:34:25.347Z,1516412065.347 [CommandLine](IMPORTANT): Running 
2018-01-20T01:34:25.368Z,1516412065.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:25.404Z,1516412065.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:25.407Z,1516412065.407 [Default] Stopped
2018-01-20T01:34:25.407Z,1516412065.407 [Default](DEBUG): Aggregate::uninitialize Default
2018-01-20T01:34:25.407Z,1516412065.407 [Default:B.GoToSurface] Stopped
2018-01-20T01:34:25.407Z,1516412065.407 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-01-20T01:34:25.407Z,1516412065.407 [Default:CheckIn] Stopped
2018-01-20T01:34:25.407Z,1516412065.407 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T01:34:25.407Z,1516412065.407 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T01:34:25.408Z,1516412065.408 [MissionManager](IMPORTANT): Started mission AbortDrift
2018-01-20T01:34:25.408Z,1516412065.408 [AbortDrift] Running Loop=1
2018-01-20T01:34:25.408Z,1516412065.408 [AbortDrift](DEBUG): Aggregate::initialize AbortDrift
2018-01-20T01:34:25.408Z,1516412065.408 [AbortDrift:D.Execute] Running Loop=1
2018-01-20T01:34:25.408Z,1516412065.408 [AbortDrift:A] Running Loop=1
2018-01-20T01:34:25.408Z,1516412065.408 [AbortDrift:D.Execute] Running Loop=1
2018-01-20T01:34:25.409Z,1516412065.409 [AbortDrift:D.Execute](INFO): Executing command stop
2018-01-20T01:34:25.410Z,1516412065.410 [AbortDrift:TimeoutExpiredAcousticReceive] Running Loop=1
2018-01-20T01:34:25.410Z,1516412065.410 [AbortDrift:TimeoutExpiredAcousticReceive](DEBUG): Aggregate::initialize AbortDrift:TimeoutExpiredAcousticReceive
2018-01-20T01:34:25.410Z,1516412065.410 [AbortDrift:TimeoutExpiredAcousticReceive:A] Running Loop=1
2018-01-20T01:34:25.411Z,1516412065.411 [AbortDrift:TimeoutExpiredAcousticReceive:A] Stopped
2018-01-20T01:34:25.411Z,1516412065.411 [AbortDrift:TimeoutExpiredAcousticReceive:B] Running Loop=1
2018-01-20T01:34:25.412Z,1516412065.412 [AbortDrift:A] Stopped
2018-01-20T01:34:25.412Z,1516412065.412 [AbortDrift:E] Running Loop=1
2018-01-20T01:34:25.446Z,1516412065.446 [CommandLine](IMPORTANT): got command stop
2018-01-20T01:34:25.446Z,1516412065.446 [Supervisor](INFO): Stop Mission called by CommandLine::commandStop
2018-01-20T01:34:25.531Z,1516412065.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:25.575Z,1516412065.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:25.587Z,1516412065.587 [AbortDrift:E] Stopped
2018-01-20T01:34:25.588Z,1516412065.588 [AbortDrift:TimeoutExpiredAcousticReceive:B](IMPORTANT): Acoustic timeout 0.166667 h exceeded. Elapsed time since last acoustic reception = 4.007213 h , Elapsed time since last time_fix = 430238.222222 h . Aborting drift by executing stop command.
2018-01-20T01:34:25.589Z,1516412065.589 [AbortDrift:TimeoutExpiredAcousticReceive:B] Stopped
2018-01-20T01:34:25.589Z,1516412065.589 [AbortDrift:TimeoutExpiredAcousticReceive](INFO): Completed AbortDrift:TimeoutExpiredAcousticReceive
2018-01-20T01:34:25.590Z,1516412065.590 [AbortDrift:TimeoutExpiredAcousticReceive] Stopped
2018-01-20T01:34:25.590Z,1516412065.590 [AbortDrift:TimeoutExpiredAcousticReceive](DEBUG): Aggregate::uninitialize AbortDrift:TimeoutExpiredAcousticReceive
2018-01-20T01:34:25.590Z,1516412065.590 [AbortDrift](INFO): Completed AbortDrift
2018-01-20T01:34:25.590Z,1516412065.590 [MissionManager](INFO): MissionManager is completed.
2018-01-20T01:34:25.590Z,1516412065.590 [MissionManager](INFO): Uninitializing Mission AbortDrift
2018-01-20T01:34:25.590Z,1516412065.590 [AbortDrift] Stopped
2018-01-20T01:34:25.590Z,1516412065.590 [AbortDrift](DEBUG): Aggregate::uninitialize AbortDrift
2018-01-20T01:34:25.590Z,1516412065.590 [AbortDrift:D.Execute] Stopped
2018-01-20T01:34:25.903Z,1516412065.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:25.917Z,1516412065.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:25.919Z,1516412065.919 [MissionManager](IMPORTANT): Started mission Default
2018-01-20T01:34:25.920Z,1516412065.920 [Default] Running Loop=1
2018-01-20T01:34:25.920Z,1516412065.920 [Default](DEBUG): Aggregate::initialize Default
2018-01-20T01:34:25.920Z,1516412065.920 [Default:B.GoToSurface] Running Loop=1
2018-01-20T01:34:25.920Z,1516412065.920 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-01-20T01:34:25.920Z,1516412065.920 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-01-20T01:34:25.920Z,1516412065.920 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-01-20T01:34:25.921Z,1516412065.921 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-01-20T01:34:25.921Z,1516412065.921 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2018-01-20T01:34:25.921Z,1516412065.921 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-01-20T01:34:25.922Z,1516412065.922 [Default:A.Wait] Running Loop=1
2018-01-20T01:34:25.922Z,1516412065.922 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-01-20T01:34:26.292Z,1516412066.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:26.306Z,1516412066.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:26.679Z,1516412066.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:26.707Z,1516412066.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:27.075Z,1516412067.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:27.104Z,1516412067.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:27.469Z,1516412067.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:27.483Z,1516412067.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:27.872Z,1516412067.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:27.886Z,1516412067.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:28.271Z,1516412068.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:28.285Z,1516412068.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:28.682Z,1516412068.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:28.712Z,1516412068.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:29.086Z,1516412069.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:29.116Z,1516412069.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:29.485Z,1516412069.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:29.499Z,1516412069.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:29.873Z,1516412069.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:29.887Z,1516412069.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:30.272Z,1516412070.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:30.291Z,1516412070.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:30.677Z,1516412070.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:30.691Z,1516412070.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:31.075Z,1516412071.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:31.089Z,1516412071.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:31.485Z,1516412071.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:31.499Z,1516412071.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:31.885Z,1516412071.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:31.899Z,1516412071.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:32.284Z,1516412072.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:32.299Z,1516412072.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:32.674Z,1516412072.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:32.692Z,1516412072.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:33.072Z,1516412073.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:33.086Z,1516412073.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:33.479Z,1516412073.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:33.499Z,1516412073.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:33.880Z,1516412073.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:33.894Z,1516412073.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:34.271Z,1516412074.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:34.290Z,1516412074.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:34.684Z,1516412074.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:34.703Z,1516412074.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:35.086Z,1516412075.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:35.100Z,1516412075.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:35.485Z,1516412075.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:35.499Z,1516412075.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:35.879Z,1516412075.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:35.899Z,1516412075.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:36.275Z,1516412076.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:36.295Z,1516412076.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:36.673Z,1516412076.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:36.690Z,1516412076.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:37.075Z,1516412077.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:37.090Z,1516412077.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:37.484Z,1516412077.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:37.503Z,1516412077.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:37.886Z,1516412077.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:37.899Z,1516412077.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:38.282Z,1516412078.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:38.296Z,1516412078.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:38.669Z,1516412078.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:38.683Z,1516412078.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:39.080Z,1516412079.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:39.103Z,1516412079.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:39.107Z,1516412079.107 [Default:A.Wait](INFO): Done Waiting.
2018-01-20T01:34:39.107Z,1516412079.107 [Default:A.Wait] Stopped
2018-01-20T01:34:39.107Z,1516412079.107 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T01:34:39.470Z,1516412079.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:39.497Z,1516412079.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:39.500Z,1516412079.500 [Default:CheckIn] Running Loop=1
2018-01-20T01:34:39.500Z,1516412079.500 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T01:34:39.505Z,1516412079.505 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T01:34:39.880Z,1516412079.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:39.894Z,1516412079.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:40.280Z,1516412080.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:40.294Z,1516412080.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:40.688Z,1516412080.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:40.707Z,1516412080.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:41.089Z,1516412081.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:41.103Z,1516412081.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:41.491Z,1516412081.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:41.504Z,1516412081.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:41.880Z,1516412081.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:41.899Z,1516412081.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:42.287Z,1516412082.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:42.302Z,1516412082.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:42.682Z,1516412082.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:42.696Z,1516412082.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:43.076Z,1516412083.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:43.090Z,1516412083.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:43.486Z,1516412083.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:43.500Z,1516412083.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:43.890Z,1516412083.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:43.904Z,1516412083.904 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:43.904Z,1516412083.904 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2018-01-20T01:34:43.904Z,1516412083.904 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:34:43.906Z,1516412083.906 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:43.906Z,1516412083.906 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2018-01-20T01:34:43.906Z,1516412083.906 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:34:43.908Z,1516412083.908 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:43.908Z,1516412083.908 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 88
2018-01-20T01:34:43.908Z,1516412083.908 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:34:43.935Z,1516412083.935 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:34:43.936Z,1516412083.936 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:34:43.936Z,1516412083.936 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:34:44.277Z,1516412084.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:44.318Z,1516412084.318 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:34:44.318Z,1516412084.318 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2018-01-20T01:34:44.319Z,1516412084.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:34:44.319Z,1516412084.319 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2018-01-20T01:34:44.319Z,1516412084.319 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:34:44.319Z,1516412084.319 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 88
2018-01-20T01:34:44.680Z,1516412084.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:44.693Z,1516412084.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:34:44.694Z,1516412084.694 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:34:44.694Z,1516412084.694 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:34:44.695Z,1516412084.695 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:34:44.695Z,1516412084.695 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:34:44.695Z,1516412084.695 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:34:44.696Z,1516412084.696 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:34:44.696Z,1516412084.696 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:34:44.696Z,1516412084.696 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:34:45.068Z,1516412085.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:45.100Z,1516412085.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:34:45.101Z,1516412085.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:45.461Z,1516412085.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:45.483Z,1516412085.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:34:45.484Z,1516412085.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:45.873Z,1516412085.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:45.898Z,1516412085.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:34:45.899Z,1516412085.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:46.263Z,1516412086.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:46.302Z,1516412086.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:34:46.303Z,1516412086.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:46.686Z,1516412086.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:46.704Z,1516412086.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:34:46.705Z,1516412086.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:47.091Z,1516412087.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:47.104Z,1516412087.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:34:47.105Z,1516412087.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:47.474Z,1516412087.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:47.536Z,1516412087.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:34:47.537Z,1516412087.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:47.871Z,1516412087.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:47.897Z,1516412087.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:34:47.898Z,1516412087.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:48.267Z,1516412088.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:48.298Z,1516412088.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:34:48.299Z,1516412088.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:48.672Z,1516412088.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:48.705Z,1516412088.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:34:48.706Z,1516412088.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:49.065Z,1516412089.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:49.079Z,1516412089.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:34:49.080Z,1516412089.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:49.482Z,1516412089.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:49.508Z,1516412089.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:34:49.509Z,1516412089.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:49.878Z,1516412089.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:49.912Z,1516412089.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:34:49.912Z,1516412089.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:50.274Z,1516412090.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:50.306Z,1516412090.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T01:34:50.307Z,1516412090.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:50.667Z,1516412090.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:50.681Z,1516412090.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:34:50.682Z,1516412090.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:51.067Z,1516412091.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:51.081Z,1516412091.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:34:51.082Z,1516412091.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:51.465Z,1516412091.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:51.479Z,1516412091.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:34:51.480Z,1516412091.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:51.876Z,1516412091.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:51.890Z,1516412091.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:34:51.891Z,1516412091.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:52.275Z,1516412092.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:52.289Z,1516412092.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:34:52.290Z,1516412092.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:52.678Z,1516412092.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:52.692Z,1516412092.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:34:52.693Z,1516412092.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:53.086Z,1516412093.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:53.100Z,1516412093.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:34:53.100Z,1516412093.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:53.490Z,1516412093.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:53.503Z,1516412093.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:34:53.504Z,1516412093.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:53.878Z,1516412093.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:53.891Z,1516412093.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:34:53.892Z,1516412093.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:54.274Z,1516412094.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:54.296Z,1516412094.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:34:54.296Z,1516412094.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:54.681Z,1516412094.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:54.694Z,1516412094.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:34:54.695Z,1516412094.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:55.064Z,1516412095.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:55.087Z,1516412095.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:34:55.087Z,1516412095.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:55.495Z,1516412095.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:55.508Z,1516412095.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:34:55.526Z,1516412095.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:55.886Z,1516412095.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:55.900Z,1516412095.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:34:55.901Z,1516412095.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:56.281Z,1516412096.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:56.296Z,1516412096.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:34:56.297Z,1516412096.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:56.670Z,1516412096.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:56.696Z,1516412096.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:34:56.701Z,1516412096.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:57.081Z,1516412097.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:57.095Z,1516412097.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:34:57.095Z,1516412097.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:57.465Z,1516412097.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:57.495Z,1516412097.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:34:57.496Z,1516412097.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:57.872Z,1516412097.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:57.898Z,1516412097.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:34:57.899Z,1516412097.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:58.263Z,1516412098.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:58.296Z,1516412098.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:34:58.297Z,1516412098.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:58.687Z,1516412098.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:58.701Z,1516412098.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:34:58.702Z,1516412098.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:59.096Z,1516412099.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:59.114Z,1516412099.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:34:59.115Z,1516412099.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:59.491Z,1516412099.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:59.506Z,1516412099.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:34:59.506Z,1516412099.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:34:59.871Z,1516412099.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:34:59.896Z,1516412099.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:34:59.898Z,1516412099.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:00.267Z,1516412100.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:00.298Z,1516412100.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:35:00.299Z,1516412100.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:00.668Z,1516412100.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:00.694Z,1516412100.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:35:00.695Z,1516412100.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:01.065Z,1516412101.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:01.098Z,1516412101.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:35:01.099Z,1516412101.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:01.486Z,1516412101.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:01.500Z,1516412101.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:35:01.501Z,1516412101.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:01.890Z,1516412101.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:01.910Z,1516412101.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:35:01.911Z,1516412101.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:02.282Z,1516412102.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:02.303Z,1516412102.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:35:02.303Z,1516412102.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:02.667Z,1516412102.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:02.698Z,1516412102.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:35:02.699Z,1516412102.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:03.063Z,1516412103.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:03.099Z,1516412103.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:35:03.100Z,1516412103.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:03.461Z,1516412103.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:03.487Z,1516412103.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:35:03.488Z,1516412103.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:03.868Z,1516412103.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:03.902Z,1516412103.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T01:35:03.903Z,1516412103.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:04.263Z,1516412104.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:04.299Z,1516412104.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:04.674Z,1516412104.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:04.706Z,1516412104.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:05.094Z,1516412105.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:05.108Z,1516412105.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:05.474Z,1516412105.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:05.511Z,1516412105.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:05.871Z,1516412105.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:05.896Z,1516412105.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:06.266Z,1516412106.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:06.302Z,1516412106.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:06.672Z,1516412106.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:06.698Z,1516412106.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:07.065Z,1516412107.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:07.087Z,1516412107.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:07.478Z,1516412107.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:07.515Z,1516412107.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:07.896Z,1516412107.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:07.910Z,1516412107.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:08.290Z,1516412108.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:08.304Z,1516412108.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:08.675Z,1516412108.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:08.704Z,1516412108.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:09.072Z,1516412109.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:09.098Z,1516412109.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:09.465Z,1516412109.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:09.479Z,1516412109.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:09.876Z,1516412109.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:09.910Z,1516412109.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:10.268Z,1516412110.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:10.282Z,1516412110.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:10.682Z,1516412110.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:10.715Z,1516412110.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:11.090Z,1516412111.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:11.119Z,1516412111.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:11.478Z,1516412111.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:11.516Z,1516412111.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:11.868Z,1516412111.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:11.883Z,1516412111.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:12.272Z,1516412112.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:12.286Z,1516412112.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:12.676Z,1516412112.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:12.690Z,1516412112.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:13.068Z,1516412113.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:13.082Z,1516412113.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:13.486Z,1516412113.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:13.516Z,1516412113.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:13.890Z,1516412113.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:13.922Z,1516412113.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:14.278Z,1516412114.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:14.292Z,1516412114.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:14.676Z,1516412114.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:14.695Z,1516412114.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:15.072Z,1516412115.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:15.086Z,1516412115.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:15.472Z,1516412115.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:15.486Z,1516412115.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:15.877Z,1516412115.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:15.891Z,1516412115.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:16.276Z,1516412116.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:16.290Z,1516412116.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:16.674Z,1516412116.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:16.689Z,1516412116.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:17.086Z,1516412117.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:17.100Z,1516412117.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:17.478Z,1516412117.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:17.492Z,1516412117.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:17.875Z,1516412117.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:17.895Z,1516412117.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:18.277Z,1516412118.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:18.299Z,1516412118.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:18.677Z,1516412118.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:18.691Z,1516412118.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:19.076Z,1516412119.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:19.095Z,1516412119.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:19.490Z,1516412119.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:19.504Z,1516412119.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:19.886Z,1516412119.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:19.900Z,1516412119.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:20.278Z,1516412120.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:20.300Z,1516412120.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:20.679Z,1516412120.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:20.693Z,1516412120.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:21.077Z,1516412121.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:21.091Z,1516412121.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:24.182Z,1516412124.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:24.196Z,1516412124.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:24.303Z,1516412124.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:24.334Z,1516412124.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:24.667Z,1516412124.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:24.699Z,1516412124.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:25.066Z,1516412125.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:25.092Z,1516412125.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:25.452Z,1516412125.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:25.468Z,1516412125.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:25.850Z,1516412125.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:25.865Z,1516412125.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:26.253Z,1516412126.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:26.266Z,1516412126.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:26.648Z,1516412126.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:26.662Z,1516412126.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:27.047Z,1516412127.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:27.091Z,1516412127.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:27.463Z,1516412127.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:27.469Z,1516412127.469 [PNI_TCM](ERROR): CRC does not match. Expected:0x27561 got:0x45575
2018-01-20T01:35:27.494Z,1516412127.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:27.866Z,1516412127.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:27.889Z,1516412127.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:28.266Z,1516412128.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:28.287Z,1516412128.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:28.649Z,1516412128.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:28.692Z,1516412128.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:29.054Z,1516412129.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:29.060Z,1516412129.060 [PNI_TCM](ERROR): CRC does not match. Expected:0x9556 got:0x7489
2018-01-20T01:35:29.102Z,1516412129.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:29.455Z,1516412129.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:29.469Z,1516412129.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:29.855Z,1516412129.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:29.869Z,1516412129.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:30.248Z,1516412130.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:30.289Z,1516412130.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:30.667Z,1516412130.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:30.674Z,1516412130.674 [PNI_TCM](ERROR): CRC does not match. Expected:0x47215 got:0x6593
2018-01-20T01:35:30.695Z,1516412130.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:31.062Z,1516412131.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:31.076Z,1516412131.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:31.452Z,1516412131.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:31.479Z,1516412131.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:31.853Z,1516412131.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:31.898Z,1516412131.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:32.251Z,1516412132.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:32.259Z,1516412132.259 [PNI_TCM](ERROR): CRC does not match. Expected:0x42238 got:0x37404
2018-01-20T01:35:32.279Z,1516412132.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:32.659Z,1516412132.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:32.679Z,1516412132.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:33.058Z,1516412133.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:33.072Z,1516412133.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:33.460Z,1516412133.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:33.476Z,1516412133.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:33.865Z,1516412133.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:33.879Z,1516412133.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:34.259Z,1516412134.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:34.279Z,1516412134.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:34.659Z,1516412134.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:34.673Z,1516412134.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:35.054Z,1516412135.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:35.099Z,1516412135.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:35.456Z,1516412135.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:35.464Z,1516412135.464 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2018-01-20T01:35:35.500Z,1516412135.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:35.851Z,1516412135.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:35.865Z,1516412135.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:36.256Z,1516412136.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:36.274Z,1516412136.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:36.656Z,1516412136.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:36.697Z,1516412136.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:37.059Z,1516412137.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:37.067Z,1516412137.067 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2018-01-20T01:35:37.104Z,1516412137.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:37.456Z,1516412137.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:37.483Z,1516412137.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:37.858Z,1516412137.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:37.872Z,1516412137.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:38.248Z,1516412138.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:38.279Z,1516412138.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:38.692Z,1516412138.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:38.707Z,1516412138.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:39.053Z,1516412139.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:39.060Z,1516412139.060 [PNI_TCM](ERROR): CRC does not match. Expected:0x18565 got:0x38
2018-01-20T01:35:39.087Z,1516412139.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:39.468Z,1516412139.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:39.487Z,1516412139.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:39.862Z,1516412139.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:39.907Z,1516412139.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:40.263Z,1516412140.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:40.271Z,1516412140.271 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2018-01-20T01:35:40.308Z,1516412140.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:40.640Z,1516412140.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:40.674Z,1516412140.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:41.058Z,1516412141.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:41.079Z,1516412141.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:41.461Z,1516412141.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:41.507Z,1516412141.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:41.867Z,1516412141.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:41.883Z,1516412141.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:42.264Z,1516412142.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:42.283Z,1516412142.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:42.659Z,1516412142.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:42.674Z,1516412142.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:43.039Z,1516412143.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:43.070Z,1516412143.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:43.454Z,1516412143.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:43.483Z,1516412143.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:43.870Z,1516412143.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:43.884Z,1516412143.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:44.270Z,1516412144.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:44.283Z,1516412144.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:44.656Z,1516412144.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:44.689Z,1516412144.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:45.054Z,1516412145.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:45.071Z,1516412145.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:45.458Z,1516412145.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:45.485Z,1516412145.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:45.872Z,1516412145.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:45.886Z,1516412145.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:46.265Z,1516412146.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:46.304Z,1516412146.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:46.657Z,1516412146.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:46.673Z,1516412146.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:47.055Z,1516412147.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:47.073Z,1516412147.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:47.465Z,1516412147.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:47.487Z,1516412147.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:47.869Z,1516412147.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:47.907Z,1516412147.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:48.262Z,1516412148.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:48.280Z,1516412148.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:48.644Z,1516412148.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:48.673Z,1516412148.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:49.039Z,1516412149.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:49.076Z,1516412149.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:49.466Z,1516412149.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:49.480Z,1516412149.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:49.866Z,1516412149.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:49.884Z,1516412149.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:50.268Z,1516412150.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:50.284Z,1516412150.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:50.657Z,1516412150.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:50.674Z,1516412150.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:51.043Z,1516412151.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:51.083Z,1516412151.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:51.467Z,1516412151.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:51.485Z,1516412151.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:51.862Z,1516412151.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:51.880Z,1516412151.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:52.264Z,1516412152.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:52.279Z,1516412152.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:52.640Z,1516412152.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:52.675Z,1516412152.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:53.055Z,1516412153.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:53.075Z,1516412153.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:53.466Z,1516412153.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:53.484Z,1516412153.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:53.871Z,1516412153.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:53.885Z,1516412153.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:54.265Z,1516412154.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:54.306Z,1516412154.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:54.644Z,1516412154.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:54.669Z,1516412154.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:55.039Z,1516412155.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:55.076Z,1516412155.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:55.454Z,1516412155.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:55.486Z,1516412155.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:55.866Z,1516412155.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:55.880Z,1516412155.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:56.253Z,1516412156.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:56.286Z,1516412156.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:56.642Z,1516412156.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:56.667Z,1516412156.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:57.043Z,1516412157.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:57.080Z,1516412157.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:57.466Z,1516412157.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:57.480Z,1516412157.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:57.871Z,1516412157.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:57.885Z,1516412157.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:58.266Z,1516412158.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:58.284Z,1516412158.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:58.644Z,1516412158.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:58.675Z,1516412158.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:59.047Z,1516412159.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:59.079Z,1516412159.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:59.466Z,1516412159.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:59.480Z,1516412159.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:35:59.871Z,1516412159.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:35:59.889Z,1516412159.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:00.258Z,1516412160.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:00.282Z,1516412160.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:00.645Z,1516412160.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:00.670Z,1516412160.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:01.039Z,1516412161.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:01.075Z,1516412161.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:01.454Z,1516412161.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:01.488Z,1516412161.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:01.870Z,1516412161.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:01.888Z,1516412161.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:02.268Z,1516412162.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:02.281Z,1516412162.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:02.648Z,1516412162.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:02.675Z,1516412162.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:03.043Z,1516412163.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:03.068Z,1516412163.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:03.460Z,1516412163.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:03.485Z,1516412163.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:03.861Z,1516412163.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:03.880Z,1516412163.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:04.269Z,1516412164.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:04.287Z,1516412164.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:04.648Z,1516412164.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:04.673Z,1516412164.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:05.047Z,1516412165.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:05.072Z,1516412165.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:05.462Z,1516412165.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:05.476Z,1516412165.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:05.861Z,1516412165.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:05.885Z,1516412165.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:06.258Z,1516412166.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:06.279Z,1516412166.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:06.644Z,1516412166.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:06.675Z,1516412166.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:07.040Z,1516412167.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:07.072Z,1516412167.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:07.462Z,1516412167.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:07.476Z,1516412167.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:07.866Z,1516412167.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:07.880Z,1516412167.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:08.268Z,1516412168.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:08.282Z,1516412168.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:08.658Z,1516412168.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:08.672Z,1516412168.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:09.043Z,1516412169.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:09.069Z,1516412169.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:09.464Z,1516412169.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:09.478Z,1516412169.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:09.867Z,1516412169.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:09.881Z,1516412169.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:10.263Z,1516412170.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:10.277Z,1516412170.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:10.645Z,1516412170.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:10.679Z,1516412170.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:11.042Z,1516412171.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:11.068Z,1516412171.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:11.463Z,1516412171.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:11.478Z,1516412171.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:11.872Z,1516412171.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:11.886Z,1516412171.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:12.262Z,1516412172.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:12.283Z,1516412172.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:12.644Z,1516412172.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:12.670Z,1516412172.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:13.039Z,1516412173.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:13.083Z,1516412173.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:13.450Z,1516412173.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:13.476Z,1516412173.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:13.874Z,1516412173.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:13.889Z,1516412173.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:14.253Z,1516412174.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:14.280Z,1516412174.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:14.642Z,1516412174.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:14.656Z,1516412174.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:15.043Z,1516412175.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:15.079Z,1516412175.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:15.458Z,1516412175.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:15.485Z,1516412175.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:15.862Z,1516412175.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:15.887Z,1516412175.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:16.262Z,1516412176.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:16.287Z,1516412176.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:16.652Z,1516412176.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:16.691Z,1516412176.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:17.047Z,1516412177.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:17.083Z,1516412177.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:17.462Z,1516412177.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:17.485Z,1516412177.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:17.862Z,1516412177.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:17.886Z,1516412177.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:18.254Z,1516412178.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:18.268Z,1516412178.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:18.652Z,1516412178.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:18.666Z,1516412178.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:19.050Z,1516412179.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:19.064Z,1516412179.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:19.450Z,1516412179.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:19.464Z,1516412179.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:19.862Z,1516412179.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:19.876Z,1516412179.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:20.265Z,1516412180.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:20.279Z,1516412180.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:20.640Z,1516412180.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:20.666Z,1516412180.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:21.055Z,1516412181.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:21.075Z,1516412181.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:21.456Z,1516412181.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:21.470Z,1516412181.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:24.552Z,1516412184.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:24.571Z,1516412184.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:24.696Z,1516412184.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:24.727Z,1516412184.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:25.058Z,1516412185.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:25.072Z,1516412185.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:25.457Z,1516412185.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:25.479Z,1516412185.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:25.856Z,1516412185.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:25.870Z,1516412185.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:26.246Z,1516412186.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:26.276Z,1516412186.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:26.662Z,1516412186.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:26.676Z,1516412186.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:27.064Z,1516412187.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:27.083Z,1516412187.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:27.466Z,1516412187.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:27.480Z,1516412187.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:27.839Z,1516412187.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:27.870Z,1516412187.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:28.246Z,1516412188.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:28.268Z,1516412188.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:28.652Z,1516412188.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:28.671Z,1516412188.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:29.040Z,1516412189.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:29.062Z,1516412189.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:29.443Z,1516412189.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:29.468Z,1516412189.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:29.863Z,1516412189.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:29.877Z,1516412189.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:30.260Z,1516412190.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:30.286Z,1516412190.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:30.666Z,1516412190.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:30.680Z,1516412190.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:31.043Z,1516412191.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:31.074Z,1516412191.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:31.439Z,1516412191.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:31.459Z,1516412191.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:31.848Z,1516412191.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:31.883Z,1516412191.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:32.252Z,1516412192.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:32.293Z,1516412192.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:32.662Z,1516412192.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:32.697Z,1516412192.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:33.062Z,1516412193.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:33.076Z,1516412193.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:33.466Z,1516412193.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:33.480Z,1516412193.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:33.855Z,1516412193.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:33.875Z,1516412193.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:34.255Z,1516412194.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:34.269Z,1516412194.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:34.652Z,1516412194.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:34.667Z,1516412194.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:35.055Z,1516412195.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:35.071Z,1516412195.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:35.456Z,1516412195.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:35.470Z,1516412195.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:35.858Z,1516412195.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:35.873Z,1516412195.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:36.262Z,1516412196.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:36.276Z,1516412196.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:36.658Z,1516412196.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:36.672Z,1516412196.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:37.052Z,1516412197.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:37.067Z,1516412197.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:37.455Z,1516412197.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:37.470Z,1516412197.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:37.854Z,1516412197.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:37.868Z,1516412197.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:38.256Z,1516412198.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:38.275Z,1516412198.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:38.658Z,1516412198.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:38.673Z,1516412198.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:39.062Z,1516412199.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:39.076Z,1516412199.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:39.459Z,1516412199.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:39.473Z,1516412199.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:39.852Z,1516412199.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:39.866Z,1516412199.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:40.251Z,1516412200.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:40.271Z,1516412200.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:40.656Z,1516412200.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:40.671Z,1516412200.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:41.044Z,1516412201.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:41.065Z,1516412201.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:41.451Z,1516412201.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:41.466Z,1516412201.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:41.853Z,1516412201.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:41.883Z,1516412201.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:42.263Z,1516412202.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:42.279Z,1516412202.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:42.661Z,1516412202.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:42.683Z,1516412202.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:43.039Z,1516412203.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:43.071Z,1516412203.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:43.439Z,1516412203.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:43.471Z,1516412203.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:43.844Z,1516412203.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:43.875Z,1516412203.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:44.247Z,1516412204.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:44.274Z,1516412204.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:44.667Z,1516412204.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:44.681Z,1516412204.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:45.067Z,1516412205.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:45.081Z,1516412205.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:45.470Z,1516412205.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:45.484Z,1516412205.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:45.848Z,1516412205.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:45.873Z,1516412205.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:46.243Z,1516412206.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:46.268Z,1516412206.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:46.639Z,1516412206.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:46.676Z,1516412206.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:47.059Z,1516412207.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:47.073Z,1516412207.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:47.443Z,1516412207.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:47.469Z,1516412207.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:47.864Z,1516412207.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:47.878Z,1516412207.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:48.271Z,1516412208.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:48.285Z,1516412208.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:48.667Z,1516412208.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:48.681Z,1516412208.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:49.048Z,1516412209.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:49.075Z,1516412209.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:49.448Z,1516412209.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:49.474Z,1516412209.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:49.845Z,1516412209.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:49.871Z,1516412209.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:50.248Z,1516412210.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:50.274Z,1516412210.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:50.667Z,1516412210.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:50.687Z,1516412210.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:51.071Z,1516412211.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:51.091Z,1516412211.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:51.468Z,1516412211.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:51.482Z,1516412211.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:51.848Z,1516412211.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:51.874Z,1516412211.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:52.243Z,1516412212.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:52.278Z,1516412212.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:52.639Z,1516412212.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:52.676Z,1516412212.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:53.048Z,1516412213.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:53.074Z,1516412213.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:53.443Z,1516412213.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:53.474Z,1516412213.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:53.850Z,1516412213.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:53.884Z,1516412213.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:54.270Z,1516412214.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:54.291Z,1516412214.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:54.662Z,1516412214.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:54.676Z,1516412214.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:55.039Z,1516412215.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:55.075Z,1516412215.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:55.447Z,1516412215.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:55.472Z,1516412215.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:55.844Z,1516412215.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:55.870Z,1516412215.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:56.239Z,1516412216.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:56.282Z,1516412216.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:56.654Z,1516412216.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:56.679Z,1516412216.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:57.066Z,1516412217.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:57.084Z,1516412217.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:57.449Z,1516412217.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:57.483Z,1516412217.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:57.847Z,1516412217.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:57.878Z,1516412217.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:58.247Z,1516412218.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:58.278Z,1516412218.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:58.647Z,1516412218.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:58.680Z,1516412218.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:59.048Z,1516412219.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:59.078Z,1516412219.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:59.443Z,1516412219.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:59.478Z,1516412219.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:36:59.867Z,1516412219.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:36:59.881Z,1516412219.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:00.266Z,1516412220.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:00.280Z,1516412220.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:00.654Z,1516412220.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:00.691Z,1516412220.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:01.047Z,1516412221.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:01.086Z,1516412221.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:01.447Z,1516412221.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:01.482Z,1516412221.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:01.847Z,1516412221.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:01.878Z,1516412221.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:02.246Z,1516412222.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:02.260Z,1516412222.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:02.658Z,1516412222.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:02.683Z,1516412222.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:03.074Z,1516412223.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:03.088Z,1516412223.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:03.453Z,1516412223.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:03.489Z,1516412223.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:03.847Z,1516412223.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:03.883Z,1516412223.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:04.244Z,1516412224.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:04.262Z,1516412224.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:04.651Z,1516412224.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:04.665Z,1516412224.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:05.052Z,1516412225.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:05.066Z,1516412225.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:05.451Z,1516412225.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:05.471Z,1516412225.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:05.862Z,1516412225.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:05.895Z,1516412225.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:06.262Z,1516412226.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:06.292Z,1516412226.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:06.666Z,1516412226.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:06.696Z,1516412226.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:07.047Z,1516412227.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:07.060Z,1516412227.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:07.451Z,1516412227.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:07.471Z,1516412227.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:07.853Z,1516412227.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:07.867Z,1516412227.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:08.252Z,1516412228.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:08.266Z,1516412228.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:08.662Z,1516412228.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:08.676Z,1516412228.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:09.066Z,1516412229.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:09.080Z,1516412229.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:09.458Z,1516412229.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:09.478Z,1516412229.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:09.853Z,1516412229.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:09.867Z,1516412229.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:10.251Z,1516412230.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:10.265Z,1516412230.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:10.652Z,1516412230.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:10.665Z,1516412230.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:11.055Z,1516412231.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:11.075Z,1516412231.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:11.455Z,1516412231.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:11.469Z,1516412231.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:11.858Z,1516412231.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:11.872Z,1516412231.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:12.259Z,1516412232.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:12.273Z,1516412232.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:12.658Z,1516412232.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:12.672Z,1516412232.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:13.045Z,1516412233.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:13.074Z,1516412233.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:13.453Z,1516412233.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:13.467Z,1516412233.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:13.850Z,1516412233.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:13.868Z,1516412233.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:14.249Z,1516412234.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:14.263Z,1516412234.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:14.657Z,1516412234.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:14.679Z,1516412234.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:15.062Z,1516412235.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:15.076Z,1516412235.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:15.459Z,1516412235.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:15.472Z,1516412235.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:15.848Z,1516412235.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:15.874Z,1516412235.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:16.256Z,1516412236.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:16.270Z,1516412236.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:16.658Z,1516412236.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:16.672Z,1516412236.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:17.051Z,1516412237.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:17.065Z,1516412237.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:17.448Z,1516412237.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:17.506Z,1516412237.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:17.862Z,1516412237.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:17.876Z,1516412237.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:18.263Z,1516412238.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:18.277Z,1516412238.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:18.661Z,1516412238.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:18.675Z,1516412238.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:19.056Z,1516412239.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:19.071Z,1516412239.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:19.441Z,1516412239.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:19.463Z,1516412239.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:19.856Z,1516412239.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:19.871Z,1516412239.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:20.239Z,1516412240.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:20.275Z,1516412240.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:20.654Z,1516412240.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:20.681Z,1516412240.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:21.070Z,1516412241.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:21.084Z,1516412241.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:21.458Z,1516412241.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:21.483Z,1516412241.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:21.859Z,1516412241.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:21.873Z,1516412241.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:24.992Z,1516412244.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:25.021Z,1516412245.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:25.116Z,1516412245.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:25.159Z,1516412245.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:25.482Z,1516412245.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:25.496Z,1516412245.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:25.894Z,1516412245.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:25.916Z,1516412245.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:26.279Z,1516412246.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:26.293Z,1516412246.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:26.677Z,1516412246.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:26.692Z,1516412246.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:27.078Z,1516412247.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:27.091Z,1516412247.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:27.473Z,1516412247.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:27.488Z,1516412247.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:27.891Z,1516412247.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:27.918Z,1516412247.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:28.277Z,1516412248.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:28.299Z,1516412248.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:28.677Z,1516412248.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:28.695Z,1516412248.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:29.078Z,1516412249.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:29.092Z,1516412249.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:29.477Z,1516412249.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:29.491Z,1516412249.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:29.878Z,1516412249.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:29.892Z,1516412249.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:30.277Z,1516412250.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:30.291Z,1516412250.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:30.690Z,1516412250.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:30.721Z,1516412250.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:31.079Z,1516412251.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:31.093Z,1516412251.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:31.491Z,1516412251.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:31.518Z,1516412251.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:31.880Z,1516412251.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:31.895Z,1516412251.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:32.273Z,1516412252.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:32.288Z,1516412252.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:32.673Z,1516412252.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:32.692Z,1516412252.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:33.077Z,1516412253.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:33.091Z,1516412253.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:33.473Z,1516412253.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:33.487Z,1516412253.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:33.890Z,1516412253.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:33.919Z,1516412253.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:34.282Z,1516412254.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:34.299Z,1516412254.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:34.675Z,1516412254.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:34.695Z,1516412254.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:35.076Z,1516412255.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:35.095Z,1516412255.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:35.476Z,1516412255.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:35.490Z,1516412255.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:35.877Z,1516412255.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:35.891Z,1516412255.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:36.276Z,1516412256.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:36.295Z,1516412256.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:36.678Z,1516412256.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:36.692Z,1516412256.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:37.078Z,1516412257.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:37.092Z,1516412257.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:37.478Z,1516412257.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:37.492Z,1516412257.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:37.872Z,1516412257.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:37.886Z,1516412257.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:38.273Z,1516412258.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:38.287Z,1516412258.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:38.673Z,1516412258.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:38.691Z,1516412258.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:39.077Z,1516412259.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:39.091Z,1516412259.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:39.472Z,1516412259.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:39.486Z,1516412259.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:39.878Z,1516412259.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:39.892Z,1516412259.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:40.290Z,1516412260.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:40.304Z,1516412260.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:40.676Z,1516412260.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:40.695Z,1516412260.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:41.076Z,1516412261.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:41.095Z,1516412261.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:41.475Z,1516412261.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:41.489Z,1516412261.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:41.874Z,1516412261.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:41.889Z,1516412261.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:42.284Z,1516412262.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:42.298Z,1516412262.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:42.678Z,1516412262.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:42.692Z,1516412262.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:43.078Z,1516412263.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:43.092Z,1516412263.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:43.490Z,1516412263.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:43.522Z,1516412263.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:43.877Z,1516412263.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:43.899Z,1516412263.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:44.271Z,1516412264.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:44.285Z,1516412264.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:44.673Z,1516412264.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:44.695Z,1516412264.695 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:44.695Z,1516412264.695 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2018-01-20T01:37:44.696Z,1516412264.696 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:37:44.701Z,1516412264.701 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:44.702Z,1516412264.702 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2018-01-20T01:37:44.702Z,1516412264.702 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:37:44.703Z,1516412264.703 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:44.703Z,1516412264.703 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 89
2018-01-20T01:37:44.704Z,1516412264.704 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:37:44.724Z,1516412264.724 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:37:44.724Z,1516412264.724 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:37:44.724Z,1516412264.724 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:37:45.085Z,1516412265.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:45.133Z,1516412265.133 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:37:45.133Z,1516412265.133 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2018-01-20T01:37:45.133Z,1516412265.133 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:37:45.133Z,1516412265.133 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2018-01-20T01:37:45.134Z,1516412265.134 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:37:45.134Z,1516412265.134 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 89
2018-01-20T01:37:45.466Z,1516412265.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:45.496Z,1516412265.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:37:45.496Z,1516412265.496 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:37:45.496Z,1516412265.496 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:37:45.497Z,1516412265.497 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:37:45.497Z,1516412265.497 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:37:45.498Z,1516412265.498 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:37:45.498Z,1516412265.498 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:37:45.498Z,1516412265.498 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:37:45.499Z,1516412265.499 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:37:45.885Z,1516412265.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:45.899Z,1516412265.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:37:45.900Z,1516412265.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:46.289Z,1516412266.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:46.310Z,1516412266.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:37:46.311Z,1516412266.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:46.686Z,1516412266.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:46.699Z,1516412266.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:37:46.700Z,1516412266.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:47.070Z,1516412267.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:47.091Z,1516412267.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:37:47.092Z,1516412267.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:47.476Z,1516412267.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:47.490Z,1516412267.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:37:47.491Z,1516412267.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:47.864Z,1516412267.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:47.894Z,1516412267.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:37:47.895Z,1516412267.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:48.286Z,1516412268.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:48.300Z,1516412268.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:37:48.301Z,1516412268.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:48.686Z,1516412268.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:48.700Z,1516412268.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:37:48.701Z,1516412268.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:49.085Z,1516412269.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:49.099Z,1516412269.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:37:49.100Z,1516412269.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:49.488Z,1516412269.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:49.506Z,1516412269.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:37:49.507Z,1516412269.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:49.880Z,1516412269.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:49.898Z,1516412269.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:37:49.899Z,1516412269.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:50.263Z,1516412270.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:50.294Z,1516412270.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:37:50.295Z,1516412270.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:50.670Z,1516412270.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:50.692Z,1516412270.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:37:50.693Z,1516412270.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:51.074Z,1516412271.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:51.101Z,1516412271.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T01:37:51.102Z,1516412271.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:51.479Z,1516412271.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:51.498Z,1516412271.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:37:51.499Z,1516412271.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:51.893Z,1516412271.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:51.907Z,1516412271.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:37:51.908Z,1516412271.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:52.294Z,1516412272.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:52.308Z,1516412272.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:37:52.308Z,1516412272.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:52.689Z,1516412272.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:52.710Z,1516412272.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:37:52.711Z,1516412272.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:53.078Z,1516412273.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:53.096Z,1516412273.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:37:53.097Z,1516412273.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:53.467Z,1516412273.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:53.503Z,1516412273.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:37:53.504Z,1516412273.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:53.880Z,1516412273.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:53.894Z,1516412273.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:37:53.895Z,1516412273.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:54.267Z,1516412274.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:54.298Z,1516412274.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:37:54.299Z,1516412274.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:54.687Z,1516412274.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:54.701Z,1516412274.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:37:54.702Z,1516412274.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:55.086Z,1516412275.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:55.100Z,1516412275.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:37:55.101Z,1516412275.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:55.486Z,1516412275.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:55.506Z,1516412275.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:37:55.507Z,1516412275.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:55.882Z,1516412275.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:55.895Z,1516412275.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:37:55.896Z,1516412275.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:56.263Z,1516412276.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:56.288Z,1516412276.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:37:56.289Z,1516412276.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:56.667Z,1516412276.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:56.703Z,1516412276.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:37:56.704Z,1516412276.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:57.082Z,1516412277.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:57.096Z,1516412277.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:37:57.097Z,1516412277.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:57.464Z,1516412277.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:57.494Z,1516412277.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:37:57.495Z,1516412277.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:57.887Z,1516412277.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:57.906Z,1516412277.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:37:57.907Z,1516412277.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:58.294Z,1516412278.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:58.308Z,1516412278.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:37:58.309Z,1516412278.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:58.690Z,1516412278.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:58.704Z,1516412278.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:37:58.705Z,1516412278.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:59.079Z,1516412279.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:59.098Z,1516412279.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:37:59.099Z,1516412279.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:59.463Z,1516412279.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:59.491Z,1516412279.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:37:59.492Z,1516412279.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:37:59.864Z,1516412279.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:37:59.895Z,1516412279.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:37:59.896Z,1516412279.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:00.267Z,1516412280.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:00.293Z,1516412280.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:38:00.294Z,1516412280.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:00.683Z,1516412280.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:00.698Z,1516412280.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:38:00.699Z,1516412280.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:01.084Z,1516412281.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:01.106Z,1516412281.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:38:01.107Z,1516412281.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:01.490Z,1516412281.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:01.507Z,1516412281.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:38:01.508Z,1516412281.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:01.867Z,1516412281.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:01.906Z,1516412281.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:38:01.907Z,1516412281.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:02.271Z,1516412282.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:02.303Z,1516412282.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:38:02.304Z,1516412282.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:02.667Z,1516412282.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:02.702Z,1516412282.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:38:02.703Z,1516412282.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:03.064Z,1516412283.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:03.106Z,1516412283.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:38:03.107Z,1516412283.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:03.463Z,1516412283.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:03.502Z,1516412283.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:38:03.503Z,1516412283.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:03.878Z,1516412283.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:03.904Z,1516412283.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:38:03.904Z,1516412283.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:04.282Z,1516412284.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:04.314Z,1516412284.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:38:04.315Z,1516412284.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:04.683Z,1516412284.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:04.708Z,1516412284.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:05.067Z,1516412285.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:05.103Z,1516412285.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:05.471Z,1516412285.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:05.485Z,1516412285.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:05.876Z,1516412285.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:05.891Z,1516412285.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:06.276Z,1516412286.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:06.291Z,1516412286.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:06.686Z,1516412286.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:06.717Z,1516412286.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:07.078Z,1516412287.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:07.092Z,1516412287.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:07.486Z,1516412287.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:07.516Z,1516412287.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:07.873Z,1516412287.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:07.887Z,1516412287.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:08.273Z,1516412288.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:08.287Z,1516412288.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:08.677Z,1516412288.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:08.691Z,1516412288.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:09.078Z,1516412289.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:09.091Z,1516412289.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:09.473Z,1516412289.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:09.487Z,1516412289.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:09.891Z,1516412289.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:09.919Z,1516412289.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:10.279Z,1516412290.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:10.292Z,1516412290.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:10.687Z,1516412290.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:10.715Z,1516412290.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:11.072Z,1516412291.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:11.091Z,1516412291.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:11.476Z,1516412291.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:11.491Z,1516412291.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:11.873Z,1516412291.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:11.887Z,1516412291.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:12.271Z,1516412292.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:12.291Z,1516412292.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:12.686Z,1516412292.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:12.700Z,1516412292.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:13.078Z,1516412293.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:13.092Z,1516412293.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:13.490Z,1516412293.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:13.523Z,1516412293.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:13.873Z,1516412293.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:13.886Z,1516412293.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:14.276Z,1516412294.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:14.290Z,1516412294.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:14.678Z,1516412294.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:14.692Z,1516412294.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:15.090Z,1516412295.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:15.104Z,1516412295.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:15.490Z,1516412295.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:15.522Z,1516412295.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:15.877Z,1516412295.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:15.899Z,1516412295.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:16.279Z,1516412296.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:16.293Z,1516412296.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:16.682Z,1516412296.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:16.697Z,1516412296.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:17.086Z,1516412297.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:17.100Z,1516412297.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:17.482Z,1516412297.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:17.499Z,1516412297.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:17.878Z,1516412297.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:17.892Z,1516412297.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:18.278Z,1516412298.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:18.293Z,1516412298.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:18.681Z,1516412298.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:18.699Z,1516412298.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:19.086Z,1516412299.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:19.100Z,1516412299.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:19.480Z,1516412299.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:19.499Z,1516412299.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:19.880Z,1516412299.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:19.894Z,1516412299.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:20.279Z,1516412300.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:20.294Z,1516412300.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:20.679Z,1516412300.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:20.699Z,1516412300.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:21.086Z,1516412301.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:21.100Z,1516412301.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:21.482Z,1516412301.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:21.497Z,1516412301.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:21.880Z,1516412301.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:21.894Z,1516412301.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:25.398Z,1516412305.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:25.429Z,1516412305.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:25.556Z,1516412305.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:25.595Z,1516412305.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:25.904Z,1516412305.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:25.942Z,1516412305.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:26.300Z,1516412306.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:26.333Z,1516412306.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:26.687Z,1516412306.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:26.731Z,1516412306.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:27.106Z,1516412307.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:27.149Z,1516412307.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:27.515Z,1516412307.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:27.545Z,1516412307.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:27.897Z,1516412307.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:27.915Z,1516412307.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:28.300Z,1516412308.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:28.323Z,1516412308.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:28.705Z,1516412308.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:28.724Z,1516412308.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:29.085Z,1516412309.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:29.099Z,1516412309.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:29.494Z,1516412309.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:29.531Z,1516412309.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:29.894Z,1516412309.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:29.932Z,1516412309.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:30.290Z,1516412310.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:30.337Z,1516412310.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:30.696Z,1516412310.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:30.715Z,1516412310.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:31.100Z,1516412311.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:31.140Z,1516412311.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:31.499Z,1516412311.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:31.552Z,1516412311.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:31.894Z,1516412311.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:31.912Z,1516412311.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:32.296Z,1516412312.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:32.323Z,1516412312.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:32.702Z,1516412312.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:32.729Z,1516412312.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:33.106Z,1516412313.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:33.136Z,1516412313.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:33.496Z,1516412313.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:33.559Z,1516412313.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:33.889Z,1516412313.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:33.919Z,1516412313.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:34.314Z,1516412314.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:34.354Z,1516412314.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:34.704Z,1516412314.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:34.751Z,1516412314.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:35.105Z,1516412315.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:35.134Z,1516412315.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:35.525Z,1516412315.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:35.543Z,1516412315.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:35.886Z,1516412315.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:35.924Z,1516412315.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:36.286Z,1516412316.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:36.328Z,1516412316.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:36.705Z,1516412316.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:36.743Z,1516412316.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:37.105Z,1516412317.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:37.139Z,1516412317.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:37.501Z,1516412317.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:37.537Z,1516412317.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:37.894Z,1516412317.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:37.938Z,1516412317.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:38.294Z,1516412318.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:38.317Z,1516412318.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:38.703Z,1516412318.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:38.727Z,1516412318.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:39.108Z,1516412319.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:39.139Z,1516412319.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:39.505Z,1516412319.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:39.568Z,1516412319.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:39.886Z,1516412319.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:39.920Z,1516412319.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:40.306Z,1516412320.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:40.341Z,1516412320.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:40.696Z,1516412320.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:40.746Z,1516412320.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:41.098Z,1516412321.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:41.137Z,1516412321.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:41.498Z,1516412321.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:41.527Z,1516412321.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:41.889Z,1516412321.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:41.915Z,1516412321.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:42.287Z,1516412322.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:42.323Z,1516412322.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:42.702Z,1516412322.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:42.725Z,1516412322.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:43.098Z,1516412323.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:43.128Z,1516412323.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:43.502Z,1516412323.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:43.532Z,1516412323.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:43.890Z,1516412323.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:43.904Z,1516412323.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:44.288Z,1516412324.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:44.306Z,1516412324.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:44.694Z,1516412324.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:44.708Z,1516412324.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:45.102Z,1516412325.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:45.116Z,1516412325.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:45.506Z,1516412325.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:45.520Z,1516412325.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:45.894Z,1516412325.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:45.908Z,1516412325.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:46.290Z,1516412326.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:46.312Z,1516412326.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:46.699Z,1516412326.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:46.713Z,1516412326.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:47.103Z,1516412327.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:47.117Z,1516412327.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:47.498Z,1516412327.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:47.519Z,1516412327.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:47.897Z,1516412327.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:47.911Z,1516412327.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:48.294Z,1516412328.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:48.308Z,1516412328.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:48.698Z,1516412328.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:48.712Z,1516412328.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:49.103Z,1516412329.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:49.116Z,1516412329.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:49.499Z,1516412329.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:49.513Z,1516412329.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:49.892Z,1516412329.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:49.907Z,1516412329.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:50.288Z,1516412330.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:50.307Z,1516412330.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:50.698Z,1516412330.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:50.713Z,1516412330.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:51.102Z,1516412331.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:51.117Z,1516412331.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:51.498Z,1516412331.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:51.519Z,1516412331.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:51.886Z,1516412331.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:51.917Z,1516412331.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:52.295Z,1516412332.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:52.309Z,1516412332.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:52.698Z,1516412332.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:52.712Z,1516412332.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:53.106Z,1516412333.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:53.127Z,1516412333.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:53.498Z,1516412333.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:53.512Z,1516412333.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:53.888Z,1516412333.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:53.902Z,1516412333.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:54.287Z,1516412334.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:54.307Z,1516412334.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:54.698Z,1516412334.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:54.712Z,1516412334.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:55.098Z,1516412335.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:55.111Z,1516412335.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:55.498Z,1516412335.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:55.512Z,1516412335.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:55.888Z,1516412335.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:55.902Z,1516412335.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:56.287Z,1516412336.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:56.301Z,1516412336.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:56.698Z,1516412336.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:56.712Z,1516412336.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:57.098Z,1516412337.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:57.112Z,1516412337.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:57.513Z,1516412337.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:57.535Z,1516412337.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:57.884Z,1516412337.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:57.911Z,1516412337.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:58.304Z,1516412338.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:58.318Z,1516412338.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:58.679Z,1516412338.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:58.715Z,1516412338.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:59.106Z,1516412339.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:59.120Z,1516412339.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:59.506Z,1516412339.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:59.520Z,1516412339.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:38:59.899Z,1516412339.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:38:59.913Z,1516412339.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:00.287Z,1516412340.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:00.312Z,1516412340.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:00.683Z,1516412340.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:00.708Z,1516412340.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:01.080Z,1516412341.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:01.111Z,1516412341.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:01.487Z,1516412341.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:01.512Z,1516412341.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:01.902Z,1516412341.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:01.916Z,1516412341.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:02.306Z,1516412342.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:02.320Z,1516412342.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:02.706Z,1516412342.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:02.720Z,1516412342.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:03.083Z,1516412343.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:03.108Z,1516412343.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:03.479Z,1516412343.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:03.511Z,1516412343.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:03.887Z,1516412343.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:03.912Z,1516412343.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:04.284Z,1516412344.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:04.314Z,1516412344.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:04.687Z,1516412344.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:04.713Z,1516412344.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:05.106Z,1516412345.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:05.120Z,1516412345.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:05.505Z,1516412345.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:05.519Z,1516412345.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:05.890Z,1516412345.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:05.916Z,1516412345.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:06.287Z,1516412346.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:06.312Z,1516412346.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:06.683Z,1516412346.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:06.714Z,1516412346.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:07.080Z,1516412347.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:07.115Z,1516412347.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:07.487Z,1516412347.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:07.512Z,1516412347.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:07.902Z,1516412347.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:07.916Z,1516412347.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:08.303Z,1516412348.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:08.317Z,1516412348.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:08.706Z,1516412348.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:08.720Z,1516412348.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:09.083Z,1516412349.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:09.115Z,1516412349.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:09.487Z,1516412349.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:09.520Z,1516412349.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:09.887Z,1516412349.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:09.918Z,1516412349.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:10.288Z,1516412350.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:10.318Z,1516412350.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:10.679Z,1516412350.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:10.722Z,1516412350.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:11.106Z,1516412351.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:11.121Z,1516412351.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:11.506Z,1516412351.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:11.523Z,1516412351.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:11.889Z,1516412351.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:11.923Z,1516412351.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:12.287Z,1516412352.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:12.318Z,1516412352.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:12.687Z,1516412352.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:12.718Z,1516412352.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:13.084Z,1516412353.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:13.122Z,1516412353.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:13.483Z,1516412353.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:13.519Z,1516412353.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:13.902Z,1516412353.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:13.931Z,1516412353.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:14.298Z,1516412354.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:14.327Z,1516412354.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:14.690Z,1516412354.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:14.704Z,1516412354.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:15.092Z,1516412355.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:15.106Z,1516412355.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:15.492Z,1516412355.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:15.506Z,1516412355.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:15.887Z,1516412355.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:15.906Z,1516412355.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:16.294Z,1516412356.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:16.308Z,1516412356.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:16.693Z,1516412356.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:16.707Z,1516412356.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:17.095Z,1516412357.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:17.109Z,1516412357.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:17.502Z,1516412357.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:17.532Z,1516412357.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:17.906Z,1516412357.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:17.931Z,1516412357.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:17.944Z,1516412357.944 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T01:39:18.280Z,1516412358.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:18.307Z,1516412358.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:18.689Z,1516412358.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:18.703Z,1516412358.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:19.093Z,1516412359.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:19.107Z,1516412359.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:19.484Z,1516412359.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:19.502Z,1516412359.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:19.906Z,1516412359.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:19.927Z,1516412359.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:20.294Z,1516412360.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:20.307Z,1516412360.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:20.694Z,1516412360.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:20.708Z,1516412360.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:21.099Z,1516412361.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:21.135Z,1516412361.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:21.493Z,1516412361.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:21.507Z,1516412361.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:21.891Z,1516412361.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:21.906Z,1516412361.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:24.990Z,1516412364.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:25.008Z,1516412365.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:25.104Z,1516412365.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:25.139Z,1516412365.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:25.511Z,1516412365.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:25.545Z,1516412365.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:25.914Z,1516412365.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:25.928Z,1516412365.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:26.305Z,1516412366.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:26.320Z,1516412366.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:26.703Z,1516412366.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:26.718Z,1516412366.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:27.104Z,1516412367.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:27.119Z,1516412367.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:27.497Z,1516412367.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:27.512Z,1516412367.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:27.906Z,1516412367.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:27.920Z,1516412367.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:28.310Z,1516412368.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:28.324Z,1516412368.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:28.703Z,1516412368.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:28.726Z,1516412368.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:29.104Z,1516412369.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:29.123Z,1516412369.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:29.505Z,1516412369.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:29.519Z,1516412369.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:29.904Z,1516412369.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:29.924Z,1516412369.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:30.304Z,1516412370.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:30.319Z,1516412370.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:30.696Z,1516412370.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:30.710Z,1516412370.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:31.109Z,1516412371.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:31.124Z,1516412371.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:31.510Z,1516412371.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:31.525Z,1516412371.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:31.909Z,1516412371.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:31.924Z,1516412371.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:32.285Z,1516412372.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:32.311Z,1516412372.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:32.703Z,1516412372.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:32.723Z,1516412372.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:33.088Z,1516412373.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:33.114Z,1516412373.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:33.489Z,1516412373.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:33.515Z,1516412373.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:33.914Z,1516412373.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:33.928Z,1516412373.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:34.310Z,1516412374.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:34.324Z,1516412374.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:34.706Z,1516412374.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:34.720Z,1516412374.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:35.091Z,1516412375.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:35.116Z,1516412375.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:35.491Z,1516412375.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:35.522Z,1516412375.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:35.895Z,1516412375.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:35.920Z,1516412375.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:36.292Z,1516412376.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:36.318Z,1516412376.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:36.695Z,1516412376.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:36.726Z,1516412376.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:37.110Z,1516412377.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:37.125Z,1516412377.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:37.511Z,1516412377.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:37.531Z,1516412377.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:37.915Z,1516412377.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:37.935Z,1516412377.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:38.289Z,1516412378.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:38.311Z,1516412378.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:38.695Z,1516412378.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:38.726Z,1516412378.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:39.096Z,1516412379.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:39.127Z,1516412379.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:39.485Z,1516412379.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:39.499Z,1516412379.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:39.906Z,1516412379.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:39.935Z,1516412379.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:39.938Z,1516412379.938 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T01:34:39.5Z
2018-01-20T01:39:39.938Z,1516412379.938 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T01:39:39.939Z,1516412379.939 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T01:39:40.306Z,1516412380.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:40.347Z,1516412380.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:40.926Z,1516412380.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:40.944Z,1516412380.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:41.096Z,1516412381.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:41.130Z,1516412381.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:44.264Z,1516412384.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:44.278Z,1516412384.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:44.362Z,1516412384.362 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0108.lzma
2018-01-20T01:39:44.383Z,1516412384.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:44.428Z,1516412384.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:44.734Z,1516412384.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:44.748Z,1516412384.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:45.103Z,1516412385.103 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0108.lzma.bak
2018-01-20T01:39:45.103Z,1516412385.103 [DataOverHttps](INFO): SBD MOMSN=7725691
2018-01-20T01:39:45.163Z,1516412385.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:45.178Z,1516412385.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:45.582Z,1516412385.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:45.596Z,1516412385.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:45.933Z,1516412385.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:45.948Z,1516412385.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:49.025Z,1516412389.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:49.044Z,1516412389.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:49.140Z,1516412389.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:49.179Z,1516412389.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:49.534Z,1516412389.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:49.548Z,1516412389.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:49.954Z,1516412389.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:49.985Z,1516412389.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:50.338Z,1516412390.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:50.352Z,1516412390.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:50.736Z,1516412390.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:50.750Z,1516412390.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:53.825Z,1516412393.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:53.840Z,1516412393.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:53.918Z,1516412393.918 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0112.lzma
2018-01-20T01:39:53.939Z,1516412393.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:53.954Z,1516412393.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:54.311Z,1516412394.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:54.335Z,1516412394.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:54.676Z,1516412394.676 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0112.lzma.bak
2018-01-20T01:39:54.676Z,1516412394.676 [DataOverHttps](INFO): SBD MOMSN=7725693
2018-01-20T01:39:54.735Z,1516412394.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:54.749Z,1516412394.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:55.202Z,1516412395.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:55.232Z,1516412395.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:55.511Z,1516412395.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:55.534Z,1516412395.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:58.593Z,1516412398.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:58.607Z,1516412398.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:58.703Z,1516412398.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:58.737Z,1516412398.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:59.114Z,1516412399.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:59.143Z,1516412399.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:59.523Z,1516412399.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:59.537Z,1516412399.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:39:59.914Z,1516412399.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:39:59.935Z,1516412399.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:00.302Z,1516412400.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:00.316Z,1516412400.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:03.395Z,1516412403.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:03.409Z,1516412403.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:03.492Z,1516412403.492 [DataOverHttps](INFO): Sending 426 bytes from file Logs/20180119T210901/Express0109.lzma
2018-01-20T01:40:03.514Z,1516412403.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:03.541Z,1516412403.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:03.902Z,1516412403.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:03.916Z,1516412403.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:04.268Z,1516412404.268 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0109.lzma.bak
2018-01-20T01:40:04.268Z,1516412404.268 [DataOverHttps](INFO): SBD MOMSN=7725695
2018-01-20T01:40:04.327Z,1516412404.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:04.353Z,1516412404.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:04.803Z,1516412404.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:04.817Z,1516412404.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:05.100Z,1516412405.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:05.123Z,1516412405.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:08.263Z,1516412408.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:08.298Z,1516412408.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:08.397Z,1516412408.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:08.444Z,1516412408.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:08.766Z,1516412408.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:08.796Z,1516412408.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:09.170Z,1516412409.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:09.193Z,1516412409.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:09.566Z,1516412409.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:09.595Z,1516412409.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:09.956Z,1516412409.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:09.996Z,1516412409.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:13.053Z,1516412413.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:13.067Z,1516412413.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:13.149Z,1516412413.149 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Express0113.lzma
2018-01-20T01:40:13.170Z,1516412413.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:13.201Z,1516412413.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:13.575Z,1516412413.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:13.603Z,1516412413.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:13.938Z,1516412413.938 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0113.lzma.bak
2018-01-20T01:40:13.939Z,1516412413.939 [DataOverHttps](INFO): SBD MOMSN=7725709
2018-01-20T01:40:13.982Z,1516412413.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:14.015Z,1516412414.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:14.551Z,1516412414.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:14.573Z,1516412414.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:14.576Z,1516412414.576 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T01:40:14.576Z,1516412414.576 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T01:40:14.576Z,1516412414.576 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T01:40:14.756Z,1516412414.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:14.783Z,1516412414.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:18.933Z,1516412418.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:18.948Z,1516412418.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:19.048Z,1516412419.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:19.096Z,1516412419.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:19.418Z,1516412419.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:19.448Z,1516412419.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:19.810Z,1516412419.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:19.824Z,1516412419.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:20.218Z,1516412420.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:20.248Z,1516412420.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:20.601Z,1516412420.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:20.619Z,1516412420.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:21.005Z,1516412421.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:21.019Z,1516412421.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:21.403Z,1516412421.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:21.417Z,1516412421.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:21.802Z,1516412421.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:21.820Z,1516412421.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:22.210Z,1516412422.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:22.224Z,1516412422.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:22.606Z,1516412422.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:22.629Z,1516412422.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:23.014Z,1516412423.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:23.028Z,1516412423.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:23.399Z,1516412423.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:23.428Z,1516412423.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:23.800Z,1516412423.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:23.827Z,1516412423.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:24.208Z,1516412424.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:24.222Z,1516412424.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:24.591Z,1516412424.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:24.618Z,1516412424.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:25.018Z,1516412425.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:25.039Z,1516412425.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:25.416Z,1516412425.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:25.431Z,1516412425.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:25.818Z,1516412425.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:25.839Z,1516412425.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:26.189Z,1516412426.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:26.214Z,1516412426.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:26.598Z,1516412426.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:26.623Z,1516412426.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:26.991Z,1516412426.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:27.022Z,1516412427.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:27.390Z,1516412427.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:27.423Z,1516412427.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:27.798Z,1516412427.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:27.824Z,1516412427.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:28.218Z,1516412428.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:28.232Z,1516412428.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:28.612Z,1516412428.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:28.631Z,1516412428.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:29.018Z,1516412429.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:29.032Z,1516412429.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:29.391Z,1516412429.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:29.422Z,1516412429.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:29.789Z,1516412429.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:29.815Z,1516412429.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:30.196Z,1516412430.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:30.226Z,1516412430.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:30.599Z,1516412430.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:30.632Z,1516412430.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:31.006Z,1516412431.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:31.031Z,1516412431.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:31.418Z,1516412431.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:31.435Z,1516412431.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:31.801Z,1516412431.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:31.835Z,1516412431.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:32.191Z,1516412432.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:32.227Z,1516412432.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:32.599Z,1516412432.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:32.635Z,1516412432.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:32.996Z,1516412432.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:33.010Z,1516412433.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:33.394Z,1516412433.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:33.408Z,1516412433.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:33.801Z,1516412433.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:33.815Z,1516412433.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:34.210Z,1516412434.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:34.245Z,1516412434.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:34.607Z,1516412434.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:34.641Z,1516412434.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:35.014Z,1516412435.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:35.045Z,1516412435.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:35.400Z,1516412435.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:35.414Z,1516412435.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:35.793Z,1516412435.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:35.823Z,1516412435.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:36.202Z,1516412436.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:36.217Z,1516412436.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:36.605Z,1516412436.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:36.620Z,1516412436.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:37.019Z,1516412437.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:37.048Z,1516412437.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:37.419Z,1516412437.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:37.447Z,1516412437.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:37.814Z,1516412437.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:37.845Z,1516412437.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:38.194Z,1516412438.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:38.224Z,1516412438.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:38.606Z,1516412438.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:38.621Z,1516412438.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:38.000Z,1516412439.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:39.014Z,1516412439.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:39.401Z,1516412439.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:39.415Z,1516412439.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:39.799Z,1516412439.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:39.822Z,1516412439.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:40.218Z,1516412440.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:40.232Z,1516412440.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:40.609Z,1516412440.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:40.623Z,1516412440.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:41.014Z,1516412441.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:41.028Z,1516412441.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:41.407Z,1516412441.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:41.421Z,1516412441.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:41.789Z,1516412441.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:41.816Z,1516412441.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:42.196Z,1516412442.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:42.221Z,1516412442.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:42.591Z,1516412442.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:42.625Z,1516412442.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:43.014Z,1516412443.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:43.028Z,1516412443.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:43.420Z,1516412443.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:43.439Z,1516412443.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:43.819Z,1516412443.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:43.832Z,1516412443.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:44.207Z,1516412444.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:44.227Z,1516412444.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:44.594Z,1516412444.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:44.626Z,1516412444.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:45.008Z,1516412445.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:45.022Z,1516412445.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:45.394Z,1516412445.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:45.420Z,1516412445.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:45.795Z,1516412445.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:45.826Z,1516412445.826 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:45.826Z,1516412445.826 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2018-01-20T01:40:45.826Z,1516412445.826 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:40:45.828Z,1516412445.828 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:45.828Z,1516412445.828 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2018-01-20T01:40:45.828Z,1516412445.828 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:40:45.830Z,1516412445.830 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:45.830Z,1516412445.830 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 90
2018-01-20T01:40:45.830Z,1516412445.830 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:40:45.842Z,1516412445.842 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:40:45.842Z,1516412445.842 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:40:45.843Z,1516412445.843 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:40:46.209Z,1516412446.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:46.245Z,1516412446.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:40:46.245Z,1516412446.245 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2018-01-20T01:40:46.245Z,1516412446.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:40:46.246Z,1516412446.246 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2018-01-20T01:40:46.246Z,1516412446.246 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:40:46.246Z,1516412446.246 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 90
2018-01-20T01:40:46.617Z,1516412446.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:46.630Z,1516412446.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:40:46.631Z,1516412446.631 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:40:46.631Z,1516412446.631 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:40:46.631Z,1516412446.631 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:40:46.632Z,1516412446.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:40:46.632Z,1516412446.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:40:46.632Z,1516412446.632 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:40:46.633Z,1516412446.633 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:40:46.633Z,1516412446.633 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:40:47.010Z,1516412447.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:47.030Z,1516412447.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:40:47.031Z,1516412447.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:47.391Z,1516412447.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:47.423Z,1516412447.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:40:47.424Z,1516412447.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:47.793Z,1516412447.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:47.825Z,1516412447.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:40:47.826Z,1516412447.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:48.210Z,1516412448.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:48.266Z,1516412448.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:40:48.267Z,1516412448.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:48.591Z,1516412448.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:48.627Z,1516412448.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:40:48.628Z,1516412448.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:49.018Z,1516412449.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:49.032Z,1516412449.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:40:49.033Z,1516412449.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:49.418Z,1516412449.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:49.431Z,1516412449.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:40:49.432Z,1516412449.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:49.842Z,1516412449.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:49.872Z,1516412449.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:40:49.873Z,1516412449.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:50.193Z,1516412450.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:50.223Z,1516412450.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:40:50.224Z,1516412450.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:50.599Z,1516412450.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:50.623Z,1516412450.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:40:50.624Z,1516412450.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:50.995Z,1516412450.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:51.031Z,1516412451.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:40:51.032Z,1516412451.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:51.394Z,1516412451.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:51.407Z,1516412451.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:40:51.408Z,1516412451.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:51.795Z,1516412451.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:51.830Z,1516412451.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:40:51.831Z,1516412451.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:52.210Z,1516412452.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:52.236Z,1516412452.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T01:40:52.237Z,1516412452.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:52.606Z,1516412452.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:52.636Z,1516412452.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:40:52.637Z,1516412452.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:53.014Z,1516412453.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:53.037Z,1516412453.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:40:53.038Z,1516412453.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:53.409Z,1516412453.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:53.444Z,1516412453.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:40:53.445Z,1516412453.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:53.791Z,1516412453.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:53.817Z,1516412453.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:40:53.818Z,1516412453.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:54.205Z,1516412454.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:54.244Z,1516412454.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:40:54.246Z,1516412454.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:54.607Z,1516412454.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:54.620Z,1516412454.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:40:54.621Z,1516412454.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:55.006Z,1516412455.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:55.020Z,1516412455.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:40:55.021Z,1516412455.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:55.418Z,1516412455.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:55.439Z,1516412455.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:40:55.440Z,1516412455.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:55.810Z,1516412455.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:55.841Z,1516412455.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:40:55.842Z,1516412455.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:56.202Z,1516412456.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:56.216Z,1516412456.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:40:56.217Z,1516412456.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:56.605Z,1516412456.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:56.619Z,1516412456.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:40:56.620Z,1516412456.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:57.001Z,1516412457.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:57.015Z,1516412457.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:40:57.015Z,1516412457.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:57.402Z,1516412457.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:57.422Z,1516412457.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:40:57.423Z,1516412457.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:57.805Z,1516412457.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:57.822Z,1516412457.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:40:57.823Z,1516412457.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:58.218Z,1516412458.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:58.248Z,1516412458.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:40:58.249Z,1516412458.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:58.606Z,1516412458.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:58.620Z,1516412458.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:40:58.621Z,1516412458.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:59.018Z,1516412459.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:59.048Z,1516412459.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:40:59.049Z,1516412459.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:59.401Z,1516412459.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:59.414Z,1516412459.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:40:59.415Z,1516412459.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:40:59.798Z,1516412459.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:40:59.816Z,1516412459.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:40:59.821Z,1516412459.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:00.208Z,1516412460.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:00.222Z,1516412460.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:41:00.223Z,1516412460.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:00.601Z,1516412460.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:00.614Z,1516412460.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:41:00.615Z,1516412460.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:01.009Z,1516412461.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:01.031Z,1516412461.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:41:01.032Z,1516412461.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:01.414Z,1516412461.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:01.434Z,1516412461.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:41:01.435Z,1516412461.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:01.814Z,1516412461.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:01.827Z,1516412461.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:41:01.828Z,1516412461.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:02.201Z,1516412462.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:02.216Z,1516412462.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:41:02.217Z,1516412462.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:02.598Z,1516412462.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:02.624Z,1516412462.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:41:02.629Z,1516412462.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:03.008Z,1516412463.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:03.022Z,1516412463.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:41:03.023Z,1516412463.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:03.402Z,1516412463.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:03.419Z,1516412463.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:41:03.420Z,1516412463.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:03.798Z,1516412463.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:03.831Z,1516412463.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:41:03.832Z,1516412463.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:04.219Z,1516412464.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:04.233Z,1516412464.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:41:04.234Z,1516412464.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:04.614Z,1516412464.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:04.628Z,1516412464.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:41:04.630Z,1516412464.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:05.010Z,1516412465.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:05.030Z,1516412465.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:41:05.031Z,1516412465.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:05.395Z,1516412465.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:05.421Z,1516412465.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:41:05.422Z,1516412465.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:05.793Z,1516412465.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:05.819Z,1516412465.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T01:41:05.820Z,1516412465.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:06.196Z,1516412466.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:06.226Z,1516412466.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:06.599Z,1516412466.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:06.626Z,1516412466.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:07.021Z,1516412467.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:07.042Z,1516412467.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:07.418Z,1516412467.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:07.439Z,1516412467.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:07.818Z,1516412467.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:07.832Z,1516412467.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:08.199Z,1516412468.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:08.224Z,1516412468.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:08.595Z,1516412468.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:08.620Z,1516412468.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:08.995Z,1516412468.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:09.026Z,1516412469.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:09.390Z,1516412469.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:09.416Z,1516412469.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:09.799Z,1516412469.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:09.824Z,1516412469.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:10.202Z,1516412470.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:10.235Z,1516412470.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:10.602Z,1516412470.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:10.635Z,1516412470.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:11.018Z,1516412471.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:11.032Z,1516412471.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:11.396Z,1516412471.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:11.422Z,1516412471.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:11.794Z,1516412471.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:11.808Z,1516412471.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:12.199Z,1516412472.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:12.234Z,1516412472.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:12.600Z,1516412472.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:12.639Z,1516412472.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:13.011Z,1516412473.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:13.036Z,1516412473.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:13.410Z,1516412473.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:13.443Z,1516412473.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:13.810Z,1516412473.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:13.836Z,1516412473.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:14.198Z,1516412474.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:14.212Z,1516412474.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:14.599Z,1516412474.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:14.615Z,1516412474.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:15.003Z,1516412475.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:15.017Z,1516412475.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:18.112Z,1516412478.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:18.140Z,1516412478.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:18.253Z,1516412478.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:18.291Z,1516412478.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:18.611Z,1516412478.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:18.639Z,1516412478.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:19.015Z,1516412479.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:19.037Z,1516412479.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:19.394Z,1516412479.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:19.408Z,1516412479.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:19.792Z,1516412479.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:19.811Z,1516412479.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:20.192Z,1516412480.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:20.206Z,1516412480.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:20.592Z,1516412480.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:20.606Z,1516412480.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:21.002Z,1516412481.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:21.016Z,1516412481.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:21.410Z,1516412481.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:21.443Z,1516412481.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:21.794Z,1516412481.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:21.808Z,1516412481.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:22.192Z,1516412482.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:22.211Z,1516412482.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:22.597Z,1516412482.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:22.610Z,1516412482.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:22.997Z,1516412482.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:23.011Z,1516412483.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:23.397Z,1516412483.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:23.411Z,1516412483.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:23.797Z,1516412483.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:23.810Z,1516412483.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:24.205Z,1516412484.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:24.232Z,1516412484.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:24.610Z,1516412484.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:24.624Z,1516412484.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:25.003Z,1516412485.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:25.018Z,1516412485.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:25.385Z,1516412485.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:25.418Z,1516412485.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:25.791Z,1516412485.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:25.816Z,1516412485.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:26.184Z,1516412486.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:26.216Z,1516412486.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:26.585Z,1516412486.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:26.611Z,1516412486.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:27.010Z,1516412487.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:27.024Z,1516412487.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:27.407Z,1516412487.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:27.421Z,1516412487.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:27.794Z,1516412487.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:27.826Z,1516412487.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:28.189Z,1516412488.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:28.218Z,1516412488.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:28.583Z,1516412488.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:28.619Z,1516412488.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:28.985Z,1516412488.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:29.015Z,1516412489.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:29.392Z,1516412489.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:29.422Z,1516412489.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:29.783Z,1516412489.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:29.827Z,1516412489.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:30.198Z,1516412490.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:30.223Z,1516412490.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:30.611Z,1516412490.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:30.625Z,1516412490.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:30.994Z,1516412490.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:31.027Z,1516412491.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:31.385Z,1516412491.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:31.399Z,1516412491.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:31.791Z,1516412491.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:31.826Z,1516412491.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:32.192Z,1516412492.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:32.230Z,1516412492.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:32.581Z,1516412492.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:32.595Z,1516412492.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:32.998Z,1516412492.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:33.023Z,1516412493.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:33.402Z,1516412493.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:33.428Z,1516412493.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:33.798Z,1516412493.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:33.823Z,1516412493.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:34.188Z,1516412494.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:34.202Z,1516412494.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:34.591Z,1516412494.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:34.605Z,1516412494.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:35.002Z,1516412495.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:35.025Z,1516412495.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:35.406Z,1516412495.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:35.435Z,1516412495.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:35.798Z,1516412495.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:35.833Z,1516412495.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:36.193Z,1516412496.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:36.207Z,1516412496.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:36.596Z,1516412496.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:36.610Z,1516412496.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:37.005Z,1516412497.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:37.039Z,1516412497.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:37.395Z,1516412497.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:37.409Z,1516412497.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:37.807Z,1516412497.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:37.837Z,1516412497.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:38.193Z,1516412498.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:38.207Z,1516412498.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:38.587Z,1516412498.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:38.607Z,1516412498.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:39.007Z,1516412499.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:39.038Z,1516412499.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:39.402Z,1516412499.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:39.416Z,1516412499.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:39.798Z,1516412499.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:39.812Z,1516412499.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:40.197Z,1516412500.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:40.219Z,1516412500.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:40.597Z,1516412500.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:40.610Z,1516412500.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:40.998Z,1516412500.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:41.012Z,1516412501.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:41.410Z,1516412501.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:41.440Z,1516412501.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:41.810Z,1516412501.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:41.845Z,1516412501.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:42.198Z,1516412502.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:42.212Z,1516412502.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:42.597Z,1516412502.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:42.611Z,1516412502.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:43.010Z,1516412503.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:43.024Z,1516412503.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:43.396Z,1516412503.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:43.411Z,1516412503.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:43.810Z,1516412503.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:43.824Z,1516412503.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:44.200Z,1516412504.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:44.214Z,1516412504.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:44.625Z,1516412504.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:44.651Z,1516412504.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:45.001Z,1516412505.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:45.023Z,1516412505.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:45.406Z,1516412505.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:45.426Z,1516412505.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:45.799Z,1516412505.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:45.821Z,1516412505.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:46.200Z,1516412506.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:46.215Z,1516412506.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:46.600Z,1516412506.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:46.614Z,1516412506.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:47.005Z,1516412507.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:47.019Z,1516412507.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:47.406Z,1516412507.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:47.420Z,1516412507.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:47.806Z,1516412507.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:47.820Z,1516412507.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:48.184Z,1516412508.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:48.215Z,1516412508.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:48.590Z,1516412508.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:48.612Z,1516412508.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:49.003Z,1516412509.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:49.017Z,1516412509.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:49.406Z,1516412509.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:49.420Z,1516412509.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:49.810Z,1516412509.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:49.824Z,1516412509.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:50.198Z,1516412510.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:50.212Z,1516412510.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:50.594Z,1516412510.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:50.612Z,1516412510.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:51.006Z,1516412511.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:51.020Z,1516412511.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:51.410Z,1516412511.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:51.423Z,1516412511.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:51.806Z,1516412511.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:51.820Z,1516412511.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:52.202Z,1516412512.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:52.216Z,1516412512.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:52.598Z,1516412512.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:52.612Z,1516412512.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:53.010Z,1516412513.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:53.024Z,1516412513.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:53.410Z,1516412513.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:53.431Z,1516412513.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:53.807Z,1516412513.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:53.827Z,1516412513.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:54.196Z,1516412514.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:54.210Z,1516412514.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:54.591Z,1516412514.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:54.614Z,1516412514.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:55.008Z,1516412515.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:55.022Z,1516412515.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:55.406Z,1516412515.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:55.420Z,1516412515.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:55.806Z,1516412515.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:55.820Z,1516412515.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:56.197Z,1516412516.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:56.211Z,1516412516.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:56.581Z,1516412516.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:56.615Z,1516412516.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:57.009Z,1516412517.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:57.024Z,1516412517.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:57.409Z,1516412517.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:57.424Z,1516412517.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:57.798Z,1516412517.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:57.825Z,1516412517.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:58.200Z,1516412518.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:58.215Z,1516412518.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:58.587Z,1516412518.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:58.615Z,1516412518.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:59.006Z,1516412519.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:59.027Z,1516412519.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:59.410Z,1516412519.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:59.424Z,1516412519.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:41:59.807Z,1516412519.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:41:59.826Z,1516412519.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:00.186Z,1516412520.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:00.211Z,1516412520.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:00.587Z,1516412520.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:00.612Z,1516412520.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:01.007Z,1516412521.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:01.021Z,1516412521.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:01.397Z,1516412521.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:01.419Z,1516412521.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:01.806Z,1516412521.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:01.820Z,1516412521.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:02.201Z,1516412522.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:02.215Z,1516412522.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:02.583Z,1516412522.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:02.608Z,1516412522.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:03.002Z,1516412523.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:03.034Z,1516412523.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:03.415Z,1516412523.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:03.435Z,1516412523.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:03.802Z,1516412523.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:03.816Z,1516412523.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:04.188Z,1516412524.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:04.213Z,1516412524.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:04.587Z,1516412524.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:04.623Z,1516412524.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:05.010Z,1516412525.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:05.024Z,1516412525.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:05.409Z,1516412525.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:05.423Z,1516412525.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:05.807Z,1516412525.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:05.821Z,1516412525.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:06.188Z,1516412526.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:06.218Z,1516412526.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:06.587Z,1516412526.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:06.618Z,1516412526.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:07.006Z,1516412527.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:07.025Z,1516412527.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:07.406Z,1516412527.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:07.423Z,1516412527.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:07.806Z,1516412527.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:07.820Z,1516412527.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:08.188Z,1516412528.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:08.223Z,1516412528.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:08.591Z,1516412528.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:08.622Z,1516412528.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:08.998Z,1516412528.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:09.023Z,1516412529.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:09.412Z,1516412529.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:09.426Z,1516412529.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:09.794Z,1516412529.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:09.819Z,1516412529.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:10.188Z,1516412530.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:10.218Z,1516412530.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:10.589Z,1516412530.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:10.603Z,1516412530.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:11.002Z,1516412531.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:11.028Z,1516412531.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:11.419Z,1516412531.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:11.433Z,1516412531.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:11.806Z,1516412531.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:11.839Z,1516412531.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:12.188Z,1516412532.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:12.203Z,1516412532.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:12.595Z,1516412532.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:12.611Z,1516412532.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:13.010Z,1516412533.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:13.035Z,1516412533.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:13.402Z,1516412533.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:13.416Z,1516412533.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:13.806Z,1516412533.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:13.820Z,1516412533.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:14.198Z,1516412534.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:14.213Z,1516412534.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:14.596Z,1516412534.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:14.611Z,1516412534.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:15.010Z,1516412535.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:15.024Z,1516412535.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:15.406Z,1516412535.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:15.420Z,1516412535.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:18.510Z,1516412538.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:18.525Z,1516412538.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:18.640Z,1516412538.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:18.671Z,1516412538.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:19.007Z,1516412539.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:19.027Z,1516412539.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:19.408Z,1516412539.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:19.423Z,1516412539.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:19.808Z,1516412539.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:19.822Z,1516412539.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:20.213Z,1516412540.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:20.227Z,1516412540.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:20.610Z,1516412540.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:20.624Z,1516412540.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:21.014Z,1516412541.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:21.051Z,1516412541.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:21.409Z,1516412541.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:21.423Z,1516412541.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:21.815Z,1516412541.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:21.835Z,1516412541.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:22.210Z,1516412542.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:22.224Z,1516412542.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:22.611Z,1516412542.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:22.625Z,1516412542.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:23.014Z,1516412543.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:23.029Z,1516412543.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:23.418Z,1516412543.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:23.432Z,1516412543.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:23.814Z,1516412543.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:23.828Z,1516412543.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:24.211Z,1516412544.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:24.231Z,1516412544.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:24.610Z,1516412544.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:24.624Z,1516412544.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:25.008Z,1516412545.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:25.021Z,1516412545.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:25.414Z,1516412545.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:25.429Z,1516412545.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:25.818Z,1516412545.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:25.832Z,1516412545.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:26.214Z,1516412546.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:26.234Z,1516412546.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:26.605Z,1516412546.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:26.619Z,1516412546.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:27.003Z,1516412547.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:27.017Z,1516412547.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:27.404Z,1516412547.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:27.418Z,1516412547.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:27.811Z,1516412547.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:27.831Z,1516412547.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:28.214Z,1516412548.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:28.228Z,1516412548.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:28.614Z,1516412548.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:28.634Z,1516412548.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:29.013Z,1516412549.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:29.027Z,1516412549.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:29.410Z,1516412549.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:29.424Z,1516412549.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:29.809Z,1516412549.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:29.826Z,1516412549.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:30.212Z,1516412550.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:30.227Z,1516412550.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:30.608Z,1516412550.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:30.623Z,1516412550.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:31.009Z,1516412551.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:31.030Z,1516412551.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:31.414Z,1516412551.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:31.428Z,1516412551.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:31.813Z,1516412551.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:31.827Z,1516412551.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:32.214Z,1516412552.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:32.228Z,1516412552.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:32.611Z,1516412552.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:32.627Z,1516412552.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:33.008Z,1516412553.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:33.022Z,1516412553.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:33.413Z,1516412553.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:33.427Z,1516412553.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:33.808Z,1516412553.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:33.823Z,1516412553.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:34.214Z,1516412554.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:34.228Z,1516412554.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:34.618Z,1516412554.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:34.631Z,1516412554.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:35.015Z,1516412555.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:35.029Z,1516412555.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:35.410Z,1516412555.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:35.425Z,1516412555.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:35.808Z,1516412555.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:35.826Z,1516412555.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:36.211Z,1516412556.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:36.226Z,1516412556.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:36.608Z,1516412556.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:36.623Z,1516412556.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:37.008Z,1516412557.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:37.022Z,1516412557.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:37.414Z,1516412557.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:37.430Z,1516412557.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:37.814Z,1516412557.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:37.828Z,1516412557.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:38.213Z,1516412558.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:38.235Z,1516412558.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:38.609Z,1516412558.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:38.623Z,1516412558.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:39.005Z,1516412559.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:39.023Z,1516412559.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:39.408Z,1516412559.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:39.422Z,1516412559.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:39.807Z,1516412559.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:39.827Z,1516412559.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:40.212Z,1516412560.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:40.227Z,1516412560.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:40.614Z,1516412560.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:40.634Z,1516412560.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:41.015Z,1516412561.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:41.029Z,1516412561.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:41.403Z,1516412561.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:41.417Z,1516412561.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:41.808Z,1516412561.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:41.823Z,1516412561.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:42.211Z,1516412562.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:42.226Z,1516412562.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:42.603Z,1516412562.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:42.618Z,1516412562.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:43.003Z,1516412563.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:43.030Z,1516412563.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:43.411Z,1516412563.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:43.431Z,1516412563.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:43.818Z,1516412563.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:43.832Z,1516412563.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:44.214Z,1516412564.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:44.234Z,1516412564.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:44.609Z,1516412564.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:44.623Z,1516412564.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:45.003Z,1516412565.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:45.017Z,1516412565.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:45.403Z,1516412565.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:45.430Z,1516412565.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:45.811Z,1516412565.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:45.825Z,1516412565.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:46.214Z,1516412566.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:46.228Z,1516412566.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:46.618Z,1516412566.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:46.631Z,1516412566.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:47.014Z,1516412567.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:47.028Z,1516412567.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:47.410Z,1516412567.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:47.424Z,1516412567.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:47.808Z,1516412567.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:47.826Z,1516412567.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:48.211Z,1516412568.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:48.226Z,1516412568.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:48.610Z,1516412568.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:48.624Z,1516412568.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:49.007Z,1516412569.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:49.021Z,1516412569.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:49.414Z,1516412569.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:49.429Z,1516412569.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:49.818Z,1516412569.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:49.832Z,1516412569.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:50.214Z,1516412570.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:50.228Z,1516412570.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:50.612Z,1516412570.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:50.626Z,1516412570.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:51.010Z,1516412571.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:51.025Z,1516412571.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:51.406Z,1516412571.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:51.419Z,1516412571.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:51.812Z,1516412571.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:51.826Z,1516412571.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:52.214Z,1516412572.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:52.228Z,1516412572.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:52.614Z,1516412572.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:52.628Z,1516412572.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:53.014Z,1516412573.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:53.028Z,1516412573.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:53.408Z,1516412573.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:53.422Z,1516412573.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:53.810Z,1516412573.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:53.823Z,1516412573.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:54.212Z,1516412574.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:54.226Z,1516412574.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:54.611Z,1516412574.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:54.625Z,1516412574.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:55.009Z,1516412575.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:55.030Z,1516412575.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:55.413Z,1516412575.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:55.427Z,1516412575.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:55.818Z,1516412575.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:55.832Z,1516412575.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:56.214Z,1516412576.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:56.234Z,1516412576.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:56.597Z,1516412576.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:56.619Z,1516412576.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:57.007Z,1516412577.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:57.027Z,1516412577.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:57.412Z,1516412577.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:57.427Z,1516412577.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:57.804Z,1516412577.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:57.840Z,1516412577.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:58.214Z,1516412578.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:58.228Z,1516412578.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:58.618Z,1516412578.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:58.631Z,1516412578.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:59.014Z,1516412579.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:59.029Z,1516412579.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:59.407Z,1516412579.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:59.421Z,1516412579.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:42:59.808Z,1516412579.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:42:59.826Z,1516412579.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:00.205Z,1516412580.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:00.219Z,1516412580.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:00.608Z,1516412580.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:00.622Z,1516412580.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:01.007Z,1516412581.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:01.021Z,1516412581.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:01.413Z,1516412581.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:01.431Z,1516412581.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:01.818Z,1516412581.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:01.832Z,1516412581.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:02.214Z,1516412582.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:02.228Z,1516412582.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:02.605Z,1516412582.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:02.619Z,1516412582.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:03.007Z,1516412583.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:03.021Z,1516412583.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:03.408Z,1516412583.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:03.422Z,1516412583.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:03.810Z,1516412583.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:03.824Z,1516412583.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:04.214Z,1516412584.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:04.228Z,1516412584.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:04.618Z,1516412584.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:04.638Z,1516412584.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:05.013Z,1516412585.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:05.027Z,1516412585.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:05.410Z,1516412585.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:05.425Z,1516412585.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:05.804Z,1516412585.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:05.818Z,1516412585.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:06.203Z,1516412586.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:06.217Z,1516412586.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:06.602Z,1516412586.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:06.635Z,1516412586.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:07.012Z,1516412587.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:07.026Z,1516412587.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:07.418Z,1516412587.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:07.432Z,1516412587.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:07.817Z,1516412587.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:07.839Z,1516412587.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:08.218Z,1516412588.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:08.238Z,1516412588.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:08.598Z,1516412588.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:08.629Z,1516412588.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:09.010Z,1516412589.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:09.024Z,1516412589.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:09.409Z,1516412589.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:09.432Z,1516412589.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:09.805Z,1516412589.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:09.827Z,1516412589.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:10.219Z,1516412590.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:10.233Z,1516412590.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:10.622Z,1516412590.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:10.636Z,1516412590.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:11.020Z,1516412591.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:11.039Z,1516412591.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:11.402Z,1516412591.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:11.436Z,1516412591.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:11.802Z,1516412591.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:11.840Z,1516412591.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:12.202Z,1516412592.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:12.247Z,1516412592.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:12.602Z,1516412592.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:12.649Z,1516412592.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:13.001Z,1516412593.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:13.048Z,1516412593.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:13.415Z,1516412593.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:13.445Z,1516412593.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:13.819Z,1516412593.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:13.841Z,1516412593.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:14.223Z,1516412594.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:14.270Z,1516412594.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:14.608Z,1516412594.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:14.635Z,1516412594.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:15.009Z,1516412595.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:15.023Z,1516412595.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:15.411Z,1516412595.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:15.435Z,1516412595.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:21.756Z,1516412601.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:21.786Z,1516412601.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:21.892Z,1516412601.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:21.928Z,1516412601.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:22.288Z,1516412602.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:22.327Z,1516412602.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:22.687Z,1516412602.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:22.711Z,1516412602.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:23.065Z,1516412603.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:23.108Z,1516412603.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:23.466Z,1516412603.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:23.501Z,1516412603.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:23.865Z,1516412603.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:23.904Z,1516412603.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:24.276Z,1516412604.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:24.311Z,1516412604.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:24.680Z,1516412604.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:24.718Z,1516412604.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:25.076Z,1516412605.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:25.107Z,1516412605.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:25.467Z,1516412605.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:25.481Z,1516412605.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:25.867Z,1516412605.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:25.887Z,1516412605.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:26.265Z,1516412606.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:26.279Z,1516412606.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:26.672Z,1516412606.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:26.686Z,1516412606.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:27.086Z,1516412607.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:27.116Z,1516412607.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:27.474Z,1516412607.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:27.488Z,1516412607.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:27.885Z,1516412607.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:27.917Z,1516412607.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:28.268Z,1516412608.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:28.295Z,1516412608.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:28.674Z,1516412608.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:28.688Z,1516412608.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:29.067Z,1516412609.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:29.081Z,1516412609.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:29.472Z,1516412609.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:29.490Z,1516412609.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:29.875Z,1516412609.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:29.889Z,1516412609.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:30.250Z,1516412610.250 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T01:43:30.250Z,1516412610.250 [NAL9602] Data Fault, FailCount= 5
2018-01-20T01:43:30.250Z,1516412610.250 [NAL9602](ERROR): Data Fault
2018-01-20T01:43:30.284Z,1516412610.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:30.299Z,1516412610.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:30.320Z,1516412610.320 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T01:43:30.320Z,1516412610.320 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-20T01:43:30.646Z,1516412610.646 [NAL9602](INFO): Powering down
2018-01-20T01:43:30.666Z,1516412610.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:30.703Z,1516412610.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:30.722Z,1516412610.722 [CommandLine](FAULT): Scheduling is paused
2018-01-20T01:43:30.722Z,1516412610.722 [CBIT](INFO): Critical error at 20180120T014330
2018-01-20T01:43:31.074Z,1516412611.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:31.087Z,1516412611.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:31.460Z,1516412611.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:31.490Z,1516412611.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:31.863Z,1516412611.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:31.894Z,1516412611.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:32.259Z,1516412612.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:32.292Z,1516412612.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:32.656Z,1516412612.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:32.690Z,1516412612.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:33.063Z,1516412613.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:33.094Z,1516412613.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:33.459Z,1516412613.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:33.490Z,1516412613.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:33.867Z,1516412613.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:33.891Z,1516412613.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:34.263Z,1516412614.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:34.289Z,1516412614.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:34.667Z,1516412614.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:34.691Z,1516412614.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:35.067Z,1516412615.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:35.091Z,1516412615.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:35.463Z,1516412615.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:35.497Z,1516412615.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:35.867Z,1516412615.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:35.899Z,1516412615.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:36.256Z,1516412616.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:36.271Z,1516412616.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:36.663Z,1516412616.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:36.689Z,1516412616.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:37.059Z,1516412617.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:37.072Z,1516412617.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:37.459Z,1516412617.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:37.473Z,1516412617.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:37.863Z,1516412617.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:37.877Z,1516412617.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:38.268Z,1516412618.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:38.282Z,1516412618.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:38.660Z,1516412618.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:38.675Z,1516412618.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:39.063Z,1516412619.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:39.078Z,1516412619.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:39.467Z,1516412619.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:39.481Z,1516412619.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:39.864Z,1516412619.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:39.878Z,1516412619.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:40.267Z,1516412620.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:40.282Z,1516412620.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:40.671Z,1516412620.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:40.685Z,1516412620.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:41.063Z,1516412621.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:41.078Z,1516412621.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:41.467Z,1516412621.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:41.482Z,1516412621.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:41.871Z,1516412621.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:41.885Z,1516412621.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:42.262Z,1516412622.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:42.285Z,1516412622.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:42.670Z,1516412622.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:42.685Z,1516412622.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:43.071Z,1516412623.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:43.084Z,1516412623.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:43.463Z,1516412623.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:43.477Z,1516412623.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:43.867Z,1516412623.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:43.881Z,1516412623.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:44.265Z,1516412624.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:44.279Z,1516412624.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:44.663Z,1516412624.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:44.677Z,1516412624.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:45.065Z,1516412625.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:45.078Z,1516412625.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:45.471Z,1516412625.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:45.484Z,1516412625.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:45.867Z,1516412625.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:45.885Z,1516412625.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:46.268Z,1516412626.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:46.282Z,1516412626.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:46.671Z,1516412626.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:46.685Z,1516412626.685 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:46.685Z,1516412626.685 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2018-01-20T01:43:46.685Z,1516412626.685 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:43:46.687Z,1516412626.687 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:46.687Z,1516412626.687 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2018-01-20T01:43:46.687Z,1516412626.687 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:43:46.689Z,1516412626.689 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:46.689Z,1516412626.689 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 91
2018-01-20T01:43:46.689Z,1516412626.689 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:43:46.745Z,1516412626.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:43:46.746Z,1516412626.746 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:43:46.746Z,1516412626.746 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:43:47.066Z,1516412627.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:47.090Z,1516412627.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:43:47.090Z,1516412627.090 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2018-01-20T01:43:47.091Z,1516412627.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:43:47.091Z,1516412627.091 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2018-01-20T01:43:47.091Z,1516412627.091 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:43:47.091Z,1516412627.091 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 91
2018-01-20T01:43:47.470Z,1516412627.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:47.482Z,1516412627.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:43:47.483Z,1516412627.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:43:47.483Z,1516412627.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:43:47.483Z,1516412627.483 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:43:47.484Z,1516412627.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:43:47.484Z,1516412627.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:43:47.484Z,1516412627.484 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:43:47.485Z,1516412627.485 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:43:47.485Z,1516412627.485 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:43:47.866Z,1516412627.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:47.886Z,1516412627.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:43:47.887Z,1516412627.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:48.266Z,1516412628.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:48.280Z,1516412628.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:43:48.281Z,1516412628.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:48.670Z,1516412628.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:48.683Z,1516412628.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:43:48.684Z,1516412628.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:49.083Z,1516412629.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:49.104Z,1516412629.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:43:49.105Z,1516412629.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:49.456Z,1516412629.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:49.488Z,1516412629.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:43:49.489Z,1516412629.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:49.870Z,1516412629.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:49.883Z,1516412629.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:43:49.884Z,1516412629.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:50.274Z,1516412630.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:50.288Z,1516412630.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:43:50.289Z,1516412630.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:50.668Z,1516412630.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:50.682Z,1516412630.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:43:50.683Z,1516412630.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:51.082Z,1516412631.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:51.102Z,1516412631.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:43:51.103Z,1516412631.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:51.460Z,1516412631.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:51.485Z,1516412631.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:43:51.486Z,1516412631.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:51.870Z,1516412631.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:51.884Z,1516412631.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:43:51.885Z,1516412631.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:52.271Z,1516412632.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:52.285Z,1516412632.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:43:52.285Z,1516412632.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:52.659Z,1516412632.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:52.690Z,1516412632.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:43:52.691Z,1516412632.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:53.074Z,1516412633.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:53.088Z,1516412633.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T01:43:53.089Z,1516412633.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:53.470Z,1516412633.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:53.494Z,1516412633.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:43:53.495Z,1516412633.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:53.875Z,1516412633.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:53.889Z,1516412633.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:43:53.890Z,1516412633.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:54.293Z,1516412634.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:54.325Z,1516412634.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:43:54.326Z,1516412634.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:54.675Z,1516412634.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:54.688Z,1516412634.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:43:54.689Z,1516412634.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:55.075Z,1516412635.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:55.088Z,1516412635.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:43:55.089Z,1516412635.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:55.469Z,1516412635.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:55.486Z,1516412635.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:43:55.487Z,1516412635.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:55.871Z,1516412635.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:55.886Z,1516412635.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:43:55.887Z,1516412635.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:56.275Z,1516412636.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:56.289Z,1516412636.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:43:56.290Z,1516412636.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:56.670Z,1516412636.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:56.684Z,1516412636.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:43:56.685Z,1516412636.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:57.063Z,1516412637.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:57.087Z,1516412637.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:43:57.088Z,1516412637.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:57.459Z,1516412637.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:57.484Z,1516412637.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:43:57.485Z,1516412637.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:57.859Z,1516412637.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:57.884Z,1516412637.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:43:57.885Z,1516412637.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:58.279Z,1516412638.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:58.292Z,1516412638.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:43:58.293Z,1516412638.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:58.674Z,1516412638.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:58.688Z,1516412638.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:43:58.689Z,1516412638.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:59.074Z,1516412639.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:59.088Z,1516412639.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:43:59.089Z,1516412639.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:59.462Z,1516412639.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:59.487Z,1516412639.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:43:59.488Z,1516412639.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:43:59.864Z,1516412639.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:43:59.895Z,1516412639.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:43:59.896Z,1516412639.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:00.259Z,1516412640.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:00.285Z,1516412640.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:44:00.286Z,1516412640.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:00.666Z,1516412640.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:00.690Z,1516412640.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:44:00.691Z,1516412640.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:01.067Z,1516412641.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:01.091Z,1516412641.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:44:01.092Z,1516412641.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:01.463Z,1516412641.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:01.493Z,1516412641.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:44:01.494Z,1516412641.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:01.866Z,1516412641.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:01.890Z,1516412641.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:44:01.891Z,1516412641.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:02.263Z,1516412642.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:02.294Z,1516412642.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:44:02.295Z,1516412642.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:02.660Z,1516412642.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:02.682Z,1516412642.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:44:02.683Z,1516412642.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:03.067Z,1516412643.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:03.097Z,1516412643.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:44:03.098Z,1516412643.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:03.467Z,1516412643.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:03.498Z,1516412643.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:44:03.499Z,1516412643.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:03.867Z,1516412643.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:03.896Z,1516412643.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:44:03.901Z,1516412643.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:04.270Z,1516412644.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:04.300Z,1516412644.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:44:04.300Z,1516412644.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:04.666Z,1516412644.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:04.700Z,1516412644.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:44:04.701Z,1516412644.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:05.071Z,1516412645.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:05.100Z,1516412645.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:44:05.101Z,1516412645.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:05.471Z,1516412645.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:05.499Z,1516412645.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:44:05.500Z,1516412645.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:05.865Z,1516412645.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:05.878Z,1516412645.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:44:05.879Z,1516412645.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:06.269Z,1516412646.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:06.283Z,1516412646.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:44:06.284Z,1516412646.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:06.670Z,1516412646.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:06.684Z,1516412646.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T01:44:06.685Z,1516412646.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:07.068Z,1516412647.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:07.083Z,1516412647.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:07.463Z,1516412647.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:07.477Z,1516412647.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:07.872Z,1516412647.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:07.886Z,1516412647.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:08.271Z,1516412648.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:08.285Z,1516412648.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:08.664Z,1516412648.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:08.678Z,1516412648.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:09.070Z,1516412649.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:09.084Z,1516412649.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:09.471Z,1516412649.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:09.486Z,1516412649.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:09.868Z,1516412649.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:09.883Z,1516412649.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:10.275Z,1516412650.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:10.288Z,1516412650.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:10.668Z,1516412650.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:10.687Z,1516412650.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:11.074Z,1516412651.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:11.088Z,1516412651.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:11.474Z,1516412651.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:11.488Z,1516412651.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:11.869Z,1516412651.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:11.883Z,1516412651.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:12.268Z,1516412652.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:12.282Z,1516412652.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:12.673Z,1516412652.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:12.686Z,1516412652.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:13.075Z,1516412653.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:13.095Z,1516412653.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:13.469Z,1516412653.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:13.484Z,1516412653.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:13.871Z,1516412653.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:13.885Z,1516412653.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:14.271Z,1516412654.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:14.285Z,1516412654.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:14.668Z,1516412654.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:14.682Z,1516412654.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:15.079Z,1516412655.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:15.092Z,1516412655.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:15.478Z,1516412655.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:15.492Z,1516412655.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:18.562Z,1516412658.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:18.577Z,1516412658.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:18.684Z,1516412658.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:18.703Z,1516412658.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:19.031Z,1516412659.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:19.056Z,1516412659.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:19.435Z,1516412659.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:19.449Z,1516412659.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:19.827Z,1516412659.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:19.841Z,1516412659.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:20.239Z,1516412660.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:20.256Z,1516412660.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:20.633Z,1516412660.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:20.647Z,1516412660.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:21.033Z,1516412661.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:21.047Z,1516412661.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:21.425Z,1516412661.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:21.439Z,1516412661.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:21.833Z,1516412661.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:21.850Z,1516412661.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:22.233Z,1516412662.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:22.247Z,1516412662.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:22.629Z,1516412662.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:22.650Z,1516412662.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:23.033Z,1516412663.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:23.047Z,1516412663.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:23.423Z,1516412663.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:23.438Z,1516412663.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:23.830Z,1516412663.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:23.844Z,1516412663.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:24.226Z,1516412664.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:24.240Z,1516412664.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:24.626Z,1516412664.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:24.640Z,1516412664.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:25.030Z,1516412665.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:25.053Z,1516412665.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:25.433Z,1516412665.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:25.447Z,1516412665.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:25.828Z,1516412665.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:25.842Z,1516412665.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:26.229Z,1516412666.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:26.250Z,1516412666.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:26.634Z,1516412666.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:26.648Z,1516412666.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:27.034Z,1516412667.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:27.048Z,1516412667.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:27.429Z,1516412667.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:27.455Z,1516412667.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:27.834Z,1516412667.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:27.848Z,1516412667.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:28.234Z,1516412668.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:28.248Z,1516412668.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:28.634Z,1516412668.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:28.648Z,1516412668.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:29.033Z,1516412669.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:29.048Z,1516412669.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:29.428Z,1516412669.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:29.442Z,1516412669.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:29.836Z,1516412669.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:29.850Z,1516412669.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:30.235Z,1516412670.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:30.248Z,1516412670.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:30.634Z,1516412670.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:30.648Z,1516412670.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:31.027Z,1516412671.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:31.040Z,1516412671.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:31.434Z,1516412671.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:31.447Z,1516412671.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:31.823Z,1516412671.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:31.839Z,1516412671.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:32.230Z,1516412672.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:32.251Z,1516412672.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:32.634Z,1516412672.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:32.647Z,1516412672.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:33.033Z,1516412673.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:33.048Z,1516412673.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:33.426Z,1516412673.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:33.447Z,1516412673.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:33.834Z,1516412673.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:33.848Z,1516412673.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:34.233Z,1516412674.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:34.247Z,1516412674.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:34.626Z,1516412674.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:34.654Z,1516412674.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:35.033Z,1516412675.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:35.047Z,1516412675.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:35.427Z,1516412675.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:35.441Z,1516412675.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:35.826Z,1516412675.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:35.846Z,1516412675.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:36.234Z,1516412676.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:36.248Z,1516412676.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:36.626Z,1516412676.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:36.640Z,1516412676.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:37.025Z,1516412677.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:37.051Z,1516412677.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:37.429Z,1516412677.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:37.448Z,1516412677.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:37.827Z,1516412677.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:37.842Z,1516412677.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:38.225Z,1516412678.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:38.247Z,1516412678.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:38.634Z,1516412678.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:38.648Z,1516412678.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:39.026Z,1516412679.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:39.040Z,1516412679.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:39.430Z,1516412679.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:39.444Z,1516412679.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:39.829Z,1516412679.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:39.851Z,1516412679.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:40.226Z,1516412680.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:40.240Z,1516412680.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:40.625Z,1516412680.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:40.642Z,1516412680.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:41.034Z,1516412681.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:41.048Z,1516412681.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:41.426Z,1516412681.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:41.440Z,1516412681.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:41.826Z,1516412681.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:41.853Z,1516412681.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:42.234Z,1516412682.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:42.248Z,1516412682.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:42.626Z,1516412682.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:42.640Z,1516412682.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:43.030Z,1516412683.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:43.044Z,1516412683.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:43.441Z,1516412683.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:43.464Z,1516412683.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:43.824Z,1516412683.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:43.862Z,1516412683.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:44.224Z,1516412684.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:44.259Z,1516412684.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:44.625Z,1516412684.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:44.667Z,1516412684.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:45.025Z,1516412685.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:45.044Z,1516412685.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:45.433Z,1516412685.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:45.450Z,1516412685.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:45.842Z,1516412685.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:45.872Z,1516412685.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:46.223Z,1516412686.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:46.277Z,1516412686.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:46.624Z,1516412686.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:46.670Z,1516412686.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:47.050Z,1516412687.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:47.072Z,1516412687.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:47.423Z,1516412687.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:47.466Z,1516412687.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:47.828Z,1516412687.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:47.864Z,1516412687.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:48.232Z,1516412688.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:48.255Z,1516412688.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:48.642Z,1516412688.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:48.661Z,1516412688.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:49.033Z,1516412689.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:49.083Z,1516412689.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:49.432Z,1516412689.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:49.455Z,1516412689.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:49.832Z,1516412689.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:49.850Z,1516412689.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:50.224Z,1516412690.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:50.267Z,1516412690.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:50.623Z,1516412690.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:50.660Z,1516412690.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:51.026Z,1516412691.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:51.059Z,1516412691.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:51.423Z,1516412691.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:51.458Z,1516412691.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:51.821Z,1516412691.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:51.835Z,1516412691.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:52.223Z,1516412692.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:52.237Z,1516412692.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:52.623Z,1516412692.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:52.637Z,1516412692.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:53.026Z,1516412693.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:53.040Z,1516412693.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:53.431Z,1516412693.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:53.445Z,1516412693.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:53.831Z,1516412693.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:53.845Z,1516412693.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:54.223Z,1516412694.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:54.238Z,1516412694.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:54.628Z,1516412694.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:54.642Z,1516412694.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:55.030Z,1516412695.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:55.045Z,1516412695.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:55.422Z,1516412695.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:55.436Z,1516412695.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:55.825Z,1516412695.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:55.839Z,1516412695.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:56.230Z,1516412696.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:56.244Z,1516412696.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:56.623Z,1516412696.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:56.637Z,1516412696.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:57.030Z,1516412697.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:57.045Z,1516412697.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:57.428Z,1516412697.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:57.442Z,1516412697.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:57.826Z,1516412697.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:57.840Z,1516412697.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:58.225Z,1516412698.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:58.239Z,1516412698.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:58.631Z,1516412698.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:58.645Z,1516412698.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:59.031Z,1516412699.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:59.045Z,1516412699.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:59.431Z,1516412699.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:59.446Z,1516412699.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:44:59.831Z,1516412699.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:44:59.845Z,1516412699.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:00.227Z,1516412700.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:00.241Z,1516412700.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:00.631Z,1516412700.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:00.645Z,1516412700.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:01.031Z,1516412701.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:01.050Z,1516412701.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:01.424Z,1516412701.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:01.437Z,1516412701.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:01.826Z,1516412701.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:01.840Z,1516412701.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:02.231Z,1516412702.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:02.247Z,1516412702.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:02.626Z,1516412702.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:02.639Z,1516412702.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:03.026Z,1516412703.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:03.040Z,1516412703.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:03.426Z,1516412703.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:03.440Z,1516412703.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:03.827Z,1516412703.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:03.840Z,1516412703.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:04.223Z,1516412704.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:04.237Z,1516412704.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:04.624Z,1516412704.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:04.637Z,1516412704.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:05.024Z,1516412705.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:05.038Z,1516412705.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:05.426Z,1516412705.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:05.441Z,1516412705.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:05.824Z,1516412705.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:05.838Z,1516412705.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:06.221Z,1516412706.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:06.235Z,1516412706.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:06.664Z,1516412706.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:06.683Z,1516412706.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:07.024Z,1516412707.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:07.050Z,1516412707.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:07.424Z,1516412707.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:07.450Z,1516412707.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:07.827Z,1516412707.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:07.845Z,1516412707.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:08.231Z,1516412708.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:08.250Z,1516412708.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:08.628Z,1516412708.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:08.642Z,1516412708.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:09.027Z,1516412709.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:09.043Z,1516412709.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:09.425Z,1516412709.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:09.447Z,1516412709.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:09.827Z,1516412709.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:09.842Z,1516412709.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:10.234Z,1516412710.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:10.249Z,1516412710.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:10.630Z,1516412710.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:10.644Z,1516412710.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:11.026Z,1516412711.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:11.039Z,1516412711.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:11.434Z,1516412711.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:11.448Z,1516412711.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:11.826Z,1516412711.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:11.843Z,1516412711.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:12.234Z,1516412712.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:12.248Z,1516412712.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:12.634Z,1516412712.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:12.648Z,1516412712.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:13.030Z,1516412713.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:13.043Z,1516412713.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:13.427Z,1516412713.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:13.441Z,1516412713.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:13.834Z,1516412713.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:13.848Z,1516412713.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:14.226Z,1516412714.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:14.246Z,1516412714.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:14.627Z,1516412714.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:14.641Z,1516412714.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:15.034Z,1516412715.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:15.049Z,1516412715.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:15.052Z,1516412715.052 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T01:45:15.052Z,1516412715.052 [Default:CheckIn:C.Wait] Stopped
2018-01-20T01:45:15.052Z,1516412715.052 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T01:45:15.052Z,1516412715.052 [Default:CheckIn:D] Running Loop=1
2018-01-20T01:45:15.429Z,1516412715.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:15.447Z,1516412715.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:15.450Z,1516412715.450 [Default:CheckIn:D] Stopped
2018-01-20T01:45:15.450Z,1516412715.450 [Default:CheckIn:E] Running Loop=1
2018-01-20T01:45:15.830Z,1516412715.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:15.844Z,1516412715.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:15.847Z,1516412715.847 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.825509 min 
2018-01-20T01:45:15.848Z,1516412715.848 [Default:CheckIn:E] Stopped
2018-01-20T01:45:15.848Z,1516412715.848 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T01:45:15.848Z,1516412715.848 [Default:CheckIn] Stopped
2018-01-20T01:45:15.848Z,1516412715.848 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T01:45:15.848Z,1516412715.848 [Default:CheckIn](INFO): Running loop #2
2018-01-20T01:45:15.848Z,1516412715.848 [Default:CheckIn] Running Loop=2
2018-01-20T01:45:15.848Z,1516412715.848 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T01:45:15.848Z,1516412715.848 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T01:45:18.918Z,1516412718.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:18.941Z,1516412718.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:19.043Z,1516412719.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:19.091Z,1516412719.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:19.418Z,1516412719.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:19.443Z,1516412719.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:19.839Z,1516412719.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:19.853Z,1516412719.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:20.226Z,1516412720.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:20.247Z,1516412720.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:20.618Z,1516412720.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:20.652Z,1516412720.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:21.026Z,1516412721.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:21.047Z,1516412721.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:21.426Z,1516412721.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:21.447Z,1516412721.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:21.816Z,1516412721.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:21.850Z,1516412721.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:22.234Z,1516412722.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:22.249Z,1516412722.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:22.626Z,1516412722.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:22.647Z,1516412722.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:23.018Z,1516412723.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:23.051Z,1516412723.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:23.434Z,1516412723.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:23.448Z,1516412723.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:23.830Z,1516412723.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:23.845Z,1516412723.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:24.218Z,1516412724.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:24.251Z,1516412724.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:24.635Z,1516412724.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:24.649Z,1516412724.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:25.026Z,1516412725.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:25.047Z,1516412725.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:25.418Z,1516412725.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:25.452Z,1516412725.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:25.834Z,1516412725.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:25.849Z,1516412725.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:26.226Z,1516412726.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:26.247Z,1516412726.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:26.618Z,1516412726.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:26.651Z,1516412726.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:27.034Z,1516412727.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:27.048Z,1516412727.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:27.426Z,1516412727.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:27.447Z,1516412727.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:27.819Z,1516412727.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:27.852Z,1516412727.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:28.235Z,1516412728.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:28.249Z,1516412728.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:28.626Z,1516412728.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:28.648Z,1516412728.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:29.018Z,1516412729.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:29.053Z,1516412729.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:29.420Z,1516412729.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:29.451Z,1516412729.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:29.838Z,1516412729.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:29.853Z,1516412729.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:30.219Z,1516412730.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:30.251Z,1516412730.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:30.264Z,1516412730.264 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T01:45:30.264Z,1516412730.264 [NAL9602] No Fault, FailCount= 5
2018-01-20T01:45:30.599Z,1516412730.599 [NAL9602](INFO): Powering up NAL9602
2018-01-20T01:45:30.618Z,1516412730.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:30.641Z,1516412730.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:31.023Z,1516412731.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:31.055Z,1516412731.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:31.428Z,1516412731.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:31.459Z,1516412731.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:31.820Z,1516412731.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:31.835Z,1516412731.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:32.223Z,1516412732.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:32.263Z,1516412732.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:32.631Z,1516412732.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:32.668Z,1516412732.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:33.024Z,1516412733.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:33.039Z,1516412733.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:33.431Z,1516412733.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:33.447Z,1516412733.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:33.824Z,1516412733.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:33.838Z,1516412733.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:34.231Z,1516412734.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:34.245Z,1516412734.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:34.631Z,1516412734.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:34.647Z,1516412734.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:35.028Z,1516412735.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:35.042Z,1516412735.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:35.427Z,1516412735.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:35.441Z,1516412735.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:35.828Z,1516412735.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:35.846Z,1516412735.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:36.226Z,1516412736.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:36.239Z,1516412736.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:36.624Z,1516412736.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:36.638Z,1516412736.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:37.032Z,1516412737.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:37.046Z,1516412737.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:37.432Z,1516412737.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:37.445Z,1516412737.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:37.827Z,1516412737.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:37.847Z,1516412737.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:38.232Z,1516412738.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:38.251Z,1516412738.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:38.626Z,1516412738.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:38.640Z,1516412738.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:39.032Z,1516412739.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:39.046Z,1516412739.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:39.432Z,1516412739.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:39.451Z,1516412739.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:39.834Z,1516412739.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:39.848Z,1516412739.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:40.234Z,1516412740.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:40.248Z,1516412740.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:40.635Z,1516412740.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:40.655Z,1516412740.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:41.038Z,1516412741.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:41.052Z,1516412741.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:41.403Z,1516412741.403 [NAL9602](INFO): NAL9602 initialized
2018-01-20T01:45:41.432Z,1516412741.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:41.451Z,1516412741.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:41.837Z,1516412741.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:41.851Z,1516412741.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:42.242Z,1516412742.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:42.257Z,1516412742.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:42.632Z,1516412742.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:42.659Z,1516412742.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:43.042Z,1516412743.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:43.081Z,1516412743.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:43.434Z,1516412743.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:43.448Z,1516412743.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:43.828Z,1516412743.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:43.855Z,1516412743.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:44.238Z,1516412744.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:44.252Z,1516412744.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:44.624Z,1516412744.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:44.659Z,1516412744.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:45.050Z,1516412745.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:45.065Z,1516412745.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:45.447Z,1516412745.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:45.462Z,1516412745.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:45.839Z,1516412745.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:45.854Z,1516412745.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:46.237Z,1516412746.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:46.251Z,1516412746.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:46.623Z,1516412746.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:46.655Z,1516412746.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:47.047Z,1516412747.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:47.067Z,1516412747.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:47.436Z,1516412747.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:47.455Z,1516412747.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:47.845Z,1516412747.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:47.867Z,1516412747.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:48.220Z,1516412748.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:48.251Z,1516412748.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:48.617Z,1516412748.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:48.643Z,1516412748.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:49.046Z,1516412749.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:49.060Z,1516412749.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:49.450Z,1516412749.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:49.464Z,1516412749.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:49.842Z,1516412749.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:49.856Z,1516412749.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:50.228Z,1516412750.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:50.253Z,1516412750.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:50.619Z,1516412750.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:50.651Z,1516412750.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:51.039Z,1516412751.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:51.058Z,1516412751.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:51.446Z,1516412751.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:51.460Z,1516412751.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:51.840Z,1516412751.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:51.874Z,1516412751.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:52.232Z,1516412752.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:52.260Z,1516412752.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:52.631Z,1516412752.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:52.660Z,1516412752.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:53.047Z,1516412753.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:53.062Z,1516412753.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:53.430Z,1516412753.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:53.456Z,1516412753.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:53.838Z,1516412753.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:53.863Z,1516412753.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:54.224Z,1516412754.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:54.238Z,1516412754.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:54.624Z,1516412754.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:54.638Z,1516412754.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:55.042Z,1516412755.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:55.071Z,1516412755.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:55.453Z,1516412755.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:55.467Z,1516412755.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:55.830Z,1516412755.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:55.844Z,1516412755.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:56.232Z,1516412756.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:56.246Z,1516412756.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:56.631Z,1516412756.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:56.645Z,1516412756.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:57.042Z,1516412757.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:57.072Z,1516412757.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:57.442Z,1516412757.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:57.456Z,1516412757.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:57.845Z,1516412757.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:57.859Z,1516412757.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:58.229Z,1516412758.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:58.243Z,1516412758.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:58.632Z,1516412758.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:58.646Z,1516412758.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:59.046Z,1516412759.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:59.060Z,1516412759.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:59.432Z,1516412759.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:59.451Z,1516412759.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:45:59.846Z,1516412759.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:45:59.860Z,1516412759.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:00.236Z,1516412760.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:00.249Z,1516412760.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:00.622Z,1516412760.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:00.642Z,1516412760.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:01.036Z,1516412761.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:01.055Z,1516412761.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:01.442Z,1516412761.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:01.456Z,1516412761.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:01.834Z,1516412761.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:01.866Z,1516412761.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:02.232Z,1516412762.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:02.247Z,1516412762.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:02.619Z,1516412762.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:02.653Z,1516412762.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:03.041Z,1516412763.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:03.056Z,1516412763.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:03.444Z,1516412763.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:03.458Z,1516412763.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:03.846Z,1516412763.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:03.866Z,1516412763.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:04.217Z,1516412764.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:04.250Z,1516412764.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:04.636Z,1516412764.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:04.650Z,1516412764.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:05.019Z,1516412765.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:05.053Z,1516412765.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:05.434Z,1516412765.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:05.461Z,1516412765.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:05.849Z,1516412765.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:05.867Z,1516412765.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:06.246Z,1516412766.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:06.260Z,1516412766.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:06.621Z,1516412766.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:06.643Z,1516412766.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:07.039Z,1516412767.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:07.059Z,1516412767.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:07.421Z,1516412767.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:07.452Z,1516412767.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:07.822Z,1516412767.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:07.859Z,1516412767.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:08.246Z,1516412768.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:08.260Z,1516412768.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:08.647Z,1516412768.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:08.661Z,1516412768.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:09.048Z,1516412769.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:09.062Z,1516412769.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:09.423Z,1516412769.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:09.455Z,1516412769.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:09.819Z,1516412769.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:09.856Z,1516412769.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:10.221Z,1516412770.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:10.247Z,1516412770.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:10.628Z,1516412770.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:10.659Z,1516412770.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:11.023Z,1516412771.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:11.057Z,1516412771.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:11.438Z,1516412771.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:11.472Z,1516412771.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:11.861Z,1516412771.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:11.875Z,1516412771.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:12.242Z,1516412772.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:12.275Z,1516412772.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:12.619Z,1516412772.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:12.645Z,1516412772.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:13.028Z,1516412773.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:13.047Z,1516412773.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:13.428Z,1516412773.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:13.441Z,1516412773.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:13.827Z,1516412773.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:13.841Z,1516412773.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:14.238Z,1516412774.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:14.252Z,1516412774.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:14.646Z,1516412774.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:14.678Z,1516412774.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:15.042Z,1516412775.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:15.056Z,1516412775.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:15.429Z,1516412775.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:15.447Z,1516412775.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:15.831Z,1516412775.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:15.850Z,1516412775.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:16.233Z,1516412776.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:16.247Z,1516412776.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:19.384Z,1516412779.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:19.398Z,1516412779.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:19.492Z,1516412779.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:19.535Z,1516412779.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:19.886Z,1516412779.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:19.901Z,1516412779.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:20.290Z,1516412780.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:20.304Z,1516412780.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:20.698Z,1516412780.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:20.712Z,1516412780.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:21.086Z,1516412781.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:21.100Z,1516412781.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:21.481Z,1516412781.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:21.494Z,1516412781.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:21.886Z,1516412781.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:21.900Z,1516412781.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:22.289Z,1516412782.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:22.303Z,1516412782.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:22.693Z,1516412782.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:22.707Z,1516412782.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:23.090Z,1516412783.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:23.104Z,1516412783.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:23.484Z,1516412783.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:23.498Z,1516412783.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:23.878Z,1516412783.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:23.904Z,1516412783.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:24.288Z,1516412784.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:24.303Z,1516412784.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:24.682Z,1516412784.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:24.700Z,1516412784.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:25.090Z,1516412785.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:25.104Z,1516412785.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:25.494Z,1516412785.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:25.508Z,1516412785.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:25.902Z,1516412785.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:25.916Z,1516412785.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:26.290Z,1516412786.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:26.303Z,1516412786.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:26.689Z,1516412786.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:26.703Z,1516412786.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:27.094Z,1516412787.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:27.108Z,1516412787.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:27.495Z,1516412787.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:27.508Z,1516412787.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:27.890Z,1516412787.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:27.912Z,1516412787.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:28.290Z,1516412788.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:28.305Z,1516412788.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:28.689Z,1516412788.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:28.703Z,1516412788.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:29.098Z,1516412789.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:29.119Z,1516412789.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:29.498Z,1516412789.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:29.512Z,1516412789.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:29.899Z,1516412789.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:29.918Z,1516412789.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:30.288Z,1516412790.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:30.304Z,1516412790.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:30.678Z,1516412790.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:30.708Z,1516412790.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:31.093Z,1516412791.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:31.108Z,1516412791.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:31.497Z,1516412791.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:31.511Z,1516412791.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:31.897Z,1516412791.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:31.911Z,1516412791.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:32.285Z,1516412792.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:32.299Z,1516412792.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:32.687Z,1516412792.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:32.701Z,1516412792.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:33.094Z,1516412793.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:33.108Z,1516412793.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:33.497Z,1516412793.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:33.511Z,1516412793.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:33.894Z,1516412793.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:33.911Z,1516412793.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:34.287Z,1516412794.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:34.307Z,1516412794.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:34.672Z,1516412794.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:34.706Z,1516412794.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:35.078Z,1516412795.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:35.100Z,1516412795.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:35.493Z,1516412795.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:35.508Z,1516412795.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:35.897Z,1516412795.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:35.911Z,1516412795.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:36.306Z,1516412796.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:36.320Z,1516412796.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:36.675Z,1516412796.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:36.707Z,1516412796.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:37.079Z,1516412797.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:37.118Z,1516412797.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:37.480Z,1516412797.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:37.511Z,1516412797.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:37.879Z,1516412797.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:37.915Z,1516412797.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:38.290Z,1516412798.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:38.322Z,1516412798.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:38.690Z,1516412798.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:38.720Z,1516412798.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:39.094Z,1516412799.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:39.124Z,1516412799.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:39.481Z,1516412799.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:39.495Z,1516412799.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:39.883Z,1516412799.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:39.903Z,1516412799.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:40.285Z,1516412800.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:40.299Z,1516412800.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:40.684Z,1516412800.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:40.698Z,1516412800.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:41.094Z,1516412801.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:41.125Z,1516412801.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:41.498Z,1516412801.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:41.512Z,1516412801.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:41.890Z,1516412801.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:41.904Z,1516412801.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:42.283Z,1516412802.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:42.302Z,1516412802.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:42.682Z,1516412802.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:42.705Z,1516412802.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:43.087Z,1516412803.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:43.101Z,1516412803.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:43.497Z,1516412803.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:43.511Z,1516412803.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:43.897Z,1516412803.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:43.911Z,1516412803.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:44.288Z,1516412804.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:44.302Z,1516412804.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:44.675Z,1516412804.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:44.711Z,1516412804.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:45.079Z,1516412805.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:45.104Z,1516412805.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:45.472Z,1516412805.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:45.503Z,1516412805.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:45.875Z,1516412805.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:45.901Z,1516412805.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:46.294Z,1516412806.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:46.308Z,1516412806.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:46.694Z,1516412806.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:46.714Z,1516412806.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:47.098Z,1516412807.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:47.112Z,1516412807.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:47.475Z,1516412807.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:47.500Z,1516412807.500 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:47.500Z,1516412807.500 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2018-01-20T01:46:47.500Z,1516412807.500 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:46:47.502Z,1516412807.502 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:47.502Z,1516412807.502 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2018-01-20T01:46:47.502Z,1516412807.502 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:46:47.504Z,1516412807.504 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:47.504Z,1516412807.504 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 92
2018-01-20T01:46:47.504Z,1516412807.504 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:46:47.516Z,1516412807.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:46:47.516Z,1516412807.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:46:47.517Z,1516412807.517 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:46:47.875Z,1516412807.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:47.921Z,1516412807.921 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:46:47.921Z,1516412807.921 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2018-01-20T01:46:47.922Z,1516412807.922 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:46:47.922Z,1516412807.922 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2018-01-20T01:46:47.922Z,1516412807.922 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:46:47.922Z,1516412807.922 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 92
2018-01-20T01:46:48.275Z,1516412808.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:48.305Z,1516412808.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:46:48.306Z,1516412808.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:46:48.306Z,1516412808.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:46:48.306Z,1516412808.306 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:46:48.307Z,1516412808.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:46:48.307Z,1516412808.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:46:48.307Z,1516412808.307 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:46:48.308Z,1516412808.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:46:48.308Z,1516412808.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:46:48.676Z,1516412808.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:48.710Z,1516412808.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:46:48.711Z,1516412808.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:49.071Z,1516412809.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:49.114Z,1516412809.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:46:49.115Z,1516412809.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:49.498Z,1516412809.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:49.512Z,1516412809.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:46:49.513Z,1516412809.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:49.898Z,1516412809.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:49.912Z,1516412809.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:46:49.913Z,1516412809.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:50.281Z,1516412810.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:50.315Z,1516412810.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:46:50.316Z,1516412810.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:50.675Z,1516412810.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:50.710Z,1516412810.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:46:50.711Z,1516412810.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:51.075Z,1516412811.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:51.110Z,1516412811.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:46:51.111Z,1516412811.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:51.477Z,1516412811.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:51.514Z,1516412811.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:46:51.515Z,1516412811.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:51.880Z,1516412811.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:51.910Z,1516412811.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:46:51.911Z,1516412811.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:52.290Z,1516412812.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:52.313Z,1516412812.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:46:52.314Z,1516412812.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:52.694Z,1516412812.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:52.727Z,1516412812.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:46:52.728Z,1516412812.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:53.094Z,1516412813.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:53.115Z,1516412813.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:46:53.116Z,1516412813.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:53.488Z,1516412813.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:53.516Z,1516412813.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:46:53.517Z,1516412813.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:53.888Z,1516412813.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:53.917Z,1516412813.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T01:46:53.918Z,1516412813.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:54.276Z,1516412814.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:54.291Z,1516412814.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:46:54.292Z,1516412814.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:54.681Z,1516412814.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:54.718Z,1516412814.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:46:54.719Z,1516412814.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:55.083Z,1516412815.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:55.098Z,1516412815.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:46:55.099Z,1516412815.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:55.486Z,1516412815.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:55.503Z,1516412815.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:46:55.504Z,1516412815.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:55.898Z,1516412815.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:55.926Z,1516412815.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:46:55.927Z,1516412815.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:56.282Z,1516412816.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:56.302Z,1516412816.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:46:56.303Z,1516412816.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:56.673Z,1516412816.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:56.695Z,1516412816.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:46:56.696Z,1516412816.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:57.084Z,1516412817.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:57.098Z,1516412817.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:46:57.099Z,1516412817.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:57.485Z,1516412817.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:57.498Z,1516412817.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:46:57.499Z,1516412817.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:57.884Z,1516412817.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:57.898Z,1516412817.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:46:57.899Z,1516412817.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:58.298Z,1516412818.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:58.327Z,1516412818.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:46:58.328Z,1516412818.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:58.686Z,1516412818.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:58.706Z,1516412818.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:46:58.707Z,1516412818.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:59.086Z,1516412819.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:59.106Z,1516412819.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:46:59.107Z,1516412819.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:59.484Z,1516412819.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:59.502Z,1516412819.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:46:59.503Z,1516412819.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:46:59.884Z,1516412819.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:46:59.898Z,1516412819.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:46:59.899Z,1516412819.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:00.279Z,1516412820.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:00.295Z,1516412820.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:47:00.295Z,1516412820.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:00.683Z,1516412820.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:00.697Z,1516412820.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:47:00.698Z,1516412820.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:01.084Z,1516412821.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:01.098Z,1516412821.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:47:01.099Z,1516412821.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:01.486Z,1516412821.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:01.500Z,1516412821.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:47:01.501Z,1516412821.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:01.898Z,1516412821.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:01.912Z,1516412821.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:47:01.929Z,1516412821.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:02.290Z,1516412822.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:02.306Z,1516412822.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:47:02.307Z,1516412822.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:02.672Z,1516412822.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:02.706Z,1516412822.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:47:02.707Z,1516412822.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:03.088Z,1516412823.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:03.106Z,1516412823.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:47:03.107Z,1516412823.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:03.487Z,1516412823.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:03.500Z,1516412823.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:47:03.501Z,1516412823.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:03.889Z,1516412823.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:03.903Z,1516412823.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:47:03.904Z,1516412823.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:04.294Z,1516412824.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:04.308Z,1516412824.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:47:04.309Z,1516412824.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:04.695Z,1516412824.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:04.708Z,1516412824.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:47:04.709Z,1516412824.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:05.091Z,1516412825.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:05.105Z,1516412825.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:47:05.106Z,1516412825.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:05.483Z,1516412825.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:05.502Z,1516412825.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:47:05.503Z,1516412825.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:05.884Z,1516412825.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:05.903Z,1516412825.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:47:05.904Z,1516412825.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:06.274Z,1516412826.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:06.298Z,1516412826.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:47:06.299Z,1516412826.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:06.682Z,1516412826.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:06.705Z,1516412826.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:47:06.706Z,1516412826.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:07.071Z,1516412827.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:07.098Z,1516412827.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:47:07.099Z,1516412827.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:07.493Z,1516412827.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:07.515Z,1516412827.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:07.896Z,1516412827.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:07.919Z,1516412827.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:08.298Z,1516412828.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:08.313Z,1516412828.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:08.681Z,1516412828.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:08.699Z,1516412828.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:09.078Z,1516412829.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:09.100Z,1516412829.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:09.489Z,1516412829.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:09.503Z,1516412829.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:09.887Z,1516412829.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:09.907Z,1516412829.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:10.294Z,1516412830.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:10.308Z,1516412830.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:10.697Z,1516412830.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:10.711Z,1516412830.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:11.097Z,1516412831.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:11.111Z,1516412831.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:11.487Z,1516412831.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:11.501Z,1516412831.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:11.884Z,1516412831.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:11.899Z,1516412831.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:12.282Z,1516412832.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:12.300Z,1516412832.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:12.682Z,1516412832.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:12.701Z,1516412832.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:13.084Z,1516412833.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:13.099Z,1516412833.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:13.486Z,1516412833.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:13.513Z,1516412833.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:13.900Z,1516412833.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:13.919Z,1516412833.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:14.299Z,1516412834.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:14.312Z,1516412834.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:14.673Z,1516412834.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:14.695Z,1516412834.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:15.079Z,1516412835.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:15.111Z,1516412835.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:15.472Z,1516412835.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:15.503Z,1516412835.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:15.879Z,1516412835.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:15.911Z,1516412835.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:16.294Z,1516412836.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:16.309Z,1516412836.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:19.404Z,1516412839.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:19.418Z,1516412839.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:19.526Z,1516412839.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:19.567Z,1516412839.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:19.903Z,1516412839.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:19.917Z,1516412839.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:20.305Z,1516412840.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:20.318Z,1516412840.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:20.692Z,1516412840.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:20.718Z,1516412840.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:21.103Z,1516412841.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:21.117Z,1516412841.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:21.506Z,1516412841.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:21.520Z,1516412841.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:21.913Z,1516412841.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:21.927Z,1516412841.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:22.313Z,1516412842.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:22.327Z,1516412842.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:22.704Z,1516412842.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:22.717Z,1516412842.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:23.087Z,1516412843.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:23.118Z,1516412843.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:23.495Z,1516412843.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:23.529Z,1516412843.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:23.904Z,1516412843.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:23.917Z,1516412843.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:24.313Z,1516412844.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:24.327Z,1516412844.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:24.712Z,1516412844.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:24.726Z,1516412844.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:25.104Z,1516412845.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:25.118Z,1516412845.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:25.487Z,1516412845.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:25.512Z,1516412845.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:25.891Z,1516412845.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:25.922Z,1516412845.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:26.287Z,1516412846.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:26.321Z,1516412846.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:26.686Z,1516412846.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:26.723Z,1516412846.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:27.095Z,1516412847.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:27.120Z,1516412847.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:27.508Z,1516412847.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:27.522Z,1516412847.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:27.908Z,1516412847.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:27.927Z,1516412847.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:28.309Z,1516412848.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:28.327Z,1516412848.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:28.691Z,1516412848.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:28.719Z,1516412848.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:29.095Z,1516412849.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:29.120Z,1516412849.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:29.492Z,1516412849.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:29.523Z,1516412849.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:29.895Z,1516412849.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:29.922Z,1516412849.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:30.310Z,1516412850.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:30.325Z,1516412850.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:30.712Z,1516412850.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:30.731Z,1516412850.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:31.098Z,1516412851.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:31.125Z,1516412851.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:31.489Z,1516412851.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:31.511Z,1516412851.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:31.895Z,1516412851.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:31.926Z,1516412851.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:32.295Z,1516412852.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:32.328Z,1516412852.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:32.690Z,1516412852.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:32.713Z,1516412852.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:33.096Z,1516412853.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:33.110Z,1516412853.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:33.506Z,1516412853.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:33.525Z,1516412853.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:33.912Z,1516412853.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:33.931Z,1516412853.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:34.314Z,1516412854.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:34.328Z,1516412854.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:34.705Z,1516412854.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:34.719Z,1516412854.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:35.105Z,1516412855.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:35.127Z,1516412855.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:35.492Z,1516412855.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:35.518Z,1516412855.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:35.887Z,1516412855.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:35.914Z,1516412855.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:36.310Z,1516412856.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:36.331Z,1516412856.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:36.714Z,1516412856.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:36.735Z,1516412856.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:37.115Z,1516412857.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:37.129Z,1516412857.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:37.489Z,1516412857.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:37.515Z,1516412857.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:37.895Z,1516412857.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:37.920Z,1516412857.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:38.295Z,1516412858.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:38.321Z,1516412858.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:38.690Z,1516412858.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:38.716Z,1516412858.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:39.095Z,1516412859.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:39.120Z,1516412859.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:39.498Z,1516412859.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:39.595Z,1516412859.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:39.902Z,1516412859.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:39.927Z,1516412859.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:40.302Z,1516412860.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:40.339Z,1516412860.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:40.699Z,1516412860.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:40.730Z,1516412860.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:41.099Z,1516412861.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:41.128Z,1516412861.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:41.504Z,1516412861.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:41.527Z,1516412861.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:41.903Z,1516412861.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:41.934Z,1516412861.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:42.298Z,1516412862.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:42.324Z,1516412862.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:42.721Z,1516412862.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:42.742Z,1516412862.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:43.110Z,1516412863.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:43.132Z,1516412863.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:43.493Z,1516412863.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:43.507Z,1516412863.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:43.895Z,1516412863.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:43.931Z,1516412863.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:44.295Z,1516412864.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:44.309Z,1516412864.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:44.691Z,1516412864.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:44.705Z,1516412864.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:45.096Z,1516412865.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:45.110Z,1516412865.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:45.510Z,1516412865.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:45.536Z,1516412865.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:45.921Z,1516412865.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:45.935Z,1516412865.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:46.314Z,1516412866.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:46.343Z,1516412866.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:46.697Z,1516412866.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:46.711Z,1516412866.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:47.092Z,1516412867.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:47.108Z,1516412867.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:47.497Z,1516412867.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:47.512Z,1516412867.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:47.899Z,1516412867.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:47.914Z,1516412867.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:48.298Z,1516412868.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:48.314Z,1516412868.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:48.711Z,1516412868.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:48.742Z,1516412868.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:49.098Z,1516412869.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:49.115Z,1516412869.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:49.488Z,1516412869.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:49.515Z,1516412869.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:49.896Z,1516412869.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:49.915Z,1516412869.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:50.300Z,1516412870.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:50.314Z,1516412870.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:50.696Z,1516412870.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:50.715Z,1516412870.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:51.096Z,1516412871.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:51.110Z,1516412871.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:51.505Z,1516412871.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:51.519Z,1516412871.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:51.914Z,1516412871.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:51.945Z,1516412871.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:52.306Z,1516412872.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:52.320Z,1516412872.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:52.698Z,1516412872.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:52.715Z,1516412872.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:53.095Z,1516412873.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:53.109Z,1516412873.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:53.501Z,1516412873.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:53.515Z,1516412873.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:53.900Z,1516412873.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:53.913Z,1516412873.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:54.314Z,1516412874.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:54.344Z,1516412874.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:54.706Z,1516412874.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:54.720Z,1516412874.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:55.114Z,1516412875.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:55.144Z,1516412875.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:55.488Z,1516412875.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:55.514Z,1516412875.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:55.903Z,1516412875.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:55.917Z,1516412875.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:56.304Z,1516412876.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:56.318Z,1516412876.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:56.703Z,1516412876.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:56.723Z,1516412876.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:57.102Z,1516412877.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:57.116Z,1516412877.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:57.506Z,1516412877.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:57.521Z,1516412877.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:57.910Z,1516412877.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:57.924Z,1516412877.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:58.304Z,1516412878.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:58.323Z,1516412878.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:58.704Z,1516412878.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:58.719Z,1516412878.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:59.103Z,1516412879.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:59.117Z,1516412879.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:59.500Z,1516412879.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:59.514Z,1516412879.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:47:59.904Z,1516412879.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:47:59.918Z,1516412879.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:00.305Z,1516412880.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:00.319Z,1516412880.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:00.710Z,1516412880.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:00.724Z,1516412880.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:01.106Z,1516412881.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:01.120Z,1516412881.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:01.496Z,1516412881.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:01.514Z,1516412881.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:01.903Z,1516412881.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:01.917Z,1516412881.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:02.300Z,1516412882.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:02.314Z,1516412882.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:02.692Z,1516412882.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:02.713Z,1516412882.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:03.108Z,1516412883.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:03.123Z,1516412883.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:03.506Z,1516412883.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:03.521Z,1516412883.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:03.910Z,1516412883.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:03.924Z,1516412883.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:04.306Z,1516412884.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:04.320Z,1516412884.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:04.702Z,1516412884.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:04.716Z,1516412884.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:05.095Z,1516412885.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:05.109Z,1516412885.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:05.495Z,1516412885.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:05.516Z,1516412885.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:05.904Z,1516412885.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:05.918Z,1516412885.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:06.306Z,1516412886.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:06.321Z,1516412886.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:06.710Z,1516412886.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:06.724Z,1516412886.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:07.106Z,1516412887.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:07.121Z,1516412887.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:07.504Z,1516412887.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:07.518Z,1516412887.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:07.900Z,1516412887.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:07.919Z,1516412887.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:08.304Z,1516412888.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:08.318Z,1516412888.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:08.703Z,1516412888.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:08.723Z,1516412888.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:09.104Z,1516412889.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:09.118Z,1516412889.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:09.506Z,1516412889.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:09.521Z,1516412889.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:09.910Z,1516412889.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:09.924Z,1516412889.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:10.306Z,1516412890.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:10.320Z,1516412890.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:10.704Z,1516412890.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:10.719Z,1516412890.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:11.100Z,1516412891.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:11.114Z,1516412891.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:11.505Z,1516412891.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:11.519Z,1516412891.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:11.904Z,1516412891.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:11.918Z,1516412891.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:12.307Z,1516412892.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:12.321Z,1516412892.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:12.711Z,1516412892.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:12.725Z,1516412892.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:13.107Z,1516412893.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:13.121Z,1516412893.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:13.503Z,1516412893.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:13.518Z,1516412893.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:13.899Z,1516412893.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:13.914Z,1516412893.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:14.296Z,1516412894.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:14.309Z,1516412894.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:14.692Z,1516412894.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:14.722Z,1516412894.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:15.102Z,1516412895.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:15.117Z,1516412895.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:15.506Z,1516412895.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:15.520Z,1516412895.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:15.905Z,1516412895.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:15.919Z,1516412895.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:16.306Z,1516412896.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:16.320Z,1516412896.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:19.389Z,1516412899.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:19.403Z,1516412899.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:19.506Z,1516412899.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:19.520Z,1516412899.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:19.870Z,1516412899.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:19.903Z,1516412899.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:20.278Z,1516412900.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:20.300Z,1516412900.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:20.670Z,1516412900.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:20.699Z,1516412900.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:21.060Z,1516412901.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:21.098Z,1516412901.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:21.462Z,1516412901.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:21.476Z,1516412901.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:21.858Z,1516412901.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:21.879Z,1516412901.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:22.271Z,1516412902.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:22.303Z,1516412902.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:22.671Z,1516412902.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:22.708Z,1516412902.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:23.072Z,1516412903.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:23.102Z,1516412903.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:23.462Z,1516412903.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:23.483Z,1516412903.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:23.860Z,1516412903.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:23.875Z,1516412903.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:24.276Z,1516412904.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:24.310Z,1516412904.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:24.666Z,1516412904.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:24.682Z,1516412904.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:25.062Z,1516412905.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:25.076Z,1516412905.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:25.461Z,1516412905.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:25.476Z,1516412905.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:25.863Z,1516412905.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:25.877Z,1516412905.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:26.265Z,1516412906.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:26.279Z,1516412906.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:26.666Z,1516412906.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:26.680Z,1516412906.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:27.074Z,1516412907.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:27.088Z,1516412907.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:27.466Z,1516412907.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:27.480Z,1516412907.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:27.864Z,1516412907.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:27.883Z,1516412907.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:28.266Z,1516412908.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:28.280Z,1516412908.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:28.666Z,1516412908.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:28.679Z,1516412908.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:29.068Z,1516412909.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:29.083Z,1516412909.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:29.461Z,1516412909.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:29.484Z,1516412909.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:29.866Z,1516412909.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:29.880Z,1516412909.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:30.269Z,1516412910.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:30.291Z,1516412910.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:30.671Z,1516412910.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:30.691Z,1516412910.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:31.073Z,1516412911.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:31.087Z,1516412911.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:31.467Z,1516412911.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:31.487Z,1516412911.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:31.864Z,1516412911.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:31.878Z,1516412911.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:32.269Z,1516412912.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:32.290Z,1516412912.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:32.672Z,1516412912.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:32.686Z,1516412912.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:33.071Z,1516412913.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:33.085Z,1516412913.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:33.463Z,1516412913.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:33.476Z,1516412913.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:33.858Z,1516412913.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:33.881Z,1516412913.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:34.261Z,1516412914.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:34.283Z,1516412914.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:34.675Z,1516412914.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:34.694Z,1516412914.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:35.072Z,1516412915.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:35.091Z,1516412915.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:35.475Z,1516412915.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:35.495Z,1516412915.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:35.864Z,1516412915.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:35.878Z,1516412915.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:36.263Z,1516412916.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:36.277Z,1516412916.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:36.658Z,1516412916.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:36.679Z,1516412916.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:37.047Z,1516412917.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:37.083Z,1516412917.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:37.475Z,1516412917.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:37.495Z,1516412917.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:37.875Z,1516412917.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:37.895Z,1516412917.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:38.268Z,1516412918.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:38.286Z,1516412918.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:38.655Z,1516412918.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:38.703Z,1516412918.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:39.055Z,1516412919.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:39.076Z,1516412919.076 [PNI_TCM](ERROR): CRC does not match. Expected:0x33062 got:0x43163
2018-01-20T01:48:39.103Z,1516412919.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:39.469Z,1516412919.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:39.490Z,1516412919.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:39.866Z,1516412919.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:39.880Z,1516412919.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:40.251Z,1516412920.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:40.295Z,1516412920.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:40.678Z,1516412920.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:40.698Z,1516412920.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:41.080Z,1516412921.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:41.099Z,1516412921.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:41.471Z,1516412921.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:41.486Z,1516412921.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:41.852Z,1516412921.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:41.894Z,1516412921.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:42.253Z,1516412922.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:42.282Z,1516412922.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:42.652Z,1516412922.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:42.691Z,1516412922.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:43.057Z,1516412923.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:43.087Z,1516412923.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:43.474Z,1516412923.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:43.511Z,1516412923.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:43.881Z,1516412923.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:43.887Z,1516412923.887 [PNI_TCM](ERROR): CRC does not match. Expected:0x54145 got:0x49482
2018-01-20T01:48:43.915Z,1516412923.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:44.279Z,1516412924.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:44.293Z,1516412924.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:44.650Z,1516412924.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:44.667Z,1516412924.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:45.055Z,1516412925.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:45.099Z,1516412925.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:45.463Z,1516412925.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:45.499Z,1516412925.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:45.854Z,1516412925.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:45.872Z,1516412925.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:46.266Z,1516412926.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:46.280Z,1516412926.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:46.671Z,1516412926.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:46.714Z,1516412926.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:47.071Z,1516412927.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:47.104Z,1516412927.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:47.477Z,1516412927.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:47.502Z,1516412927.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:47.863Z,1516412927.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:47.878Z,1516412927.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:48.255Z,1516412928.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:48.304Z,1516412928.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:48.661Z,1516412928.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:48.676Z,1516412928.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:49.060Z,1516412929.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:49.078Z,1516412929.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:49.463Z,1516412929.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:49.478Z,1516412929.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:49.874Z,1516412929.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:49.911Z,1516412929.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:50.261Z,1516412930.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:50.287Z,1516412930.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:50.653Z,1516412930.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:50.667Z,1516412930.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:51.067Z,1516412931.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:51.102Z,1516412931.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:51.456Z,1516412931.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:51.486Z,1516412931.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:51.854Z,1516412931.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:51.875Z,1516412931.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:52.263Z,1516412932.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:52.282Z,1516412932.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:52.670Z,1516412932.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:52.684Z,1516412932.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:53.069Z,1516412933.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:53.110Z,1516412933.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:53.469Z,1516412933.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:53.484Z,1516412933.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:53.860Z,1516412933.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:53.876Z,1516412933.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:54.250Z,1516412934.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:54.278Z,1516412934.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:54.658Z,1516412934.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:54.677Z,1516412934.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:55.047Z,1516412935.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:55.082Z,1516412935.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:55.467Z,1516412935.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:55.495Z,1516412935.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:55.877Z,1516412935.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:55.899Z,1516412935.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:56.274Z,1516412936.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:56.301Z,1516412936.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:56.645Z,1516412936.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:56.679Z,1516412936.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:57.051Z,1516412937.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:57.087Z,1516412937.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:57.466Z,1516412937.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:57.483Z,1516412937.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:57.850Z,1516412937.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:57.876Z,1516412937.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:58.268Z,1516412938.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:58.282Z,1516412938.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:58.679Z,1516412938.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:58.696Z,1516412938.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:59.077Z,1516412939.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:59.092Z,1516412939.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:59.471Z,1516412939.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:59.504Z,1516412939.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:48:59.856Z,1516412939.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:48:59.883Z,1516412939.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:00.267Z,1516412940.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:00.281Z,1516412940.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:00.653Z,1516412940.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:00.684Z,1516412940.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:01.052Z,1516412941.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:01.083Z,1516412941.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:01.467Z,1516412941.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:01.489Z,1516412941.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:01.879Z,1516412941.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:01.898Z,1516412941.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:02.275Z,1516412942.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:02.292Z,1516412942.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:02.649Z,1516412942.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:02.684Z,1516412942.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:03.051Z,1516412943.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:03.076Z,1516412943.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:03.452Z,1516412943.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:03.486Z,1516412943.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:03.850Z,1516412943.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:03.876Z,1516412943.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:04.255Z,1516412944.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:04.280Z,1516412944.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:04.658Z,1516412944.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:04.692Z,1516412944.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:05.062Z,1516412945.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:05.099Z,1516412945.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:05.474Z,1516412945.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:05.492Z,1516412945.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:05.851Z,1516412945.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:05.887Z,1516412945.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:06.249Z,1516412946.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:06.263Z,1516412946.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:06.652Z,1516412946.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:06.666Z,1516412946.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:07.055Z,1516412947.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:07.069Z,1516412947.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:07.462Z,1516412947.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:07.476Z,1516412947.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:07.874Z,1516412947.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:07.897Z,1516412947.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:08.273Z,1516412948.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:08.308Z,1516412948.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:08.652Z,1516412948.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:08.667Z,1516412948.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:09.056Z,1516412949.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:09.071Z,1516412949.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:09.455Z,1516412949.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:09.469Z,1516412949.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:09.853Z,1516412949.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:09.867Z,1516412949.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:10.263Z,1516412950.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:10.299Z,1516412950.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:10.670Z,1516412950.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:10.684Z,1516412950.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:11.070Z,1516412951.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:11.084Z,1516412951.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:11.474Z,1516412951.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:11.488Z,1516412951.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:11.864Z,1516412951.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:11.877Z,1516412951.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:12.256Z,1516412952.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:12.274Z,1516412952.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:12.658Z,1516412952.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:12.676Z,1516412952.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:13.060Z,1516412953.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:13.074Z,1516412953.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:13.466Z,1516412953.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:13.480Z,1516412953.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:13.870Z,1516412953.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:13.900Z,1516412953.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:14.262Z,1516412954.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:14.276Z,1516412954.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:14.651Z,1516412954.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:14.669Z,1516412954.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:15.056Z,1516412955.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:15.075Z,1516412955.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:15.455Z,1516412955.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:15.469Z,1516412955.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:15.856Z,1516412955.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:15.871Z,1516412955.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:16.256Z,1516412956.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:16.283Z,1516412956.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:16.674Z,1516412956.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:16.688Z,1516412956.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:19.787Z,1516412959.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:19.815Z,1516412959.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:19.828Z,1516412959.828 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T01:49:19.934Z,1516412959.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:19.963Z,1516412959.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:20.271Z,1516412960.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:20.314Z,1516412960.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:20.672Z,1516412960.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:20.686Z,1516412960.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:21.069Z,1516412961.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:21.083Z,1516412961.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:21.478Z,1516412961.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:21.492Z,1516412961.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:21.886Z,1516412961.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:21.918Z,1516412961.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:22.282Z,1516412962.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:22.296Z,1516412962.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:22.673Z,1516412962.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:22.687Z,1516412962.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:23.073Z,1516412963.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:23.087Z,1516412963.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:23.468Z,1516412963.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:23.486Z,1516412963.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:23.874Z,1516412963.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:23.888Z,1516412963.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:24.270Z,1516412964.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:24.284Z,1516412964.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:24.673Z,1516412964.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:24.687Z,1516412964.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:25.079Z,1516412965.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:25.093Z,1516412965.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:25.486Z,1516412965.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:25.521Z,1516412965.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:25.870Z,1516412965.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:25.884Z,1516412965.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:26.269Z,1516412966.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:26.289Z,1516412966.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:26.668Z,1516412966.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:26.683Z,1516412966.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:27.068Z,1516412967.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:27.082Z,1516412967.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:27.474Z,1516412967.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:27.489Z,1516412967.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:27.874Z,1516412967.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:27.888Z,1516412967.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:28.274Z,1516412968.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:28.295Z,1516412968.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:28.672Z,1516412968.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:28.691Z,1516412968.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:29.072Z,1516412969.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:29.086Z,1516412969.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:29.462Z,1516412969.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:29.482Z,1516412969.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:29.868Z,1516412969.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:29.896Z,1516412969.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:30.272Z,1516412970.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:30.286Z,1516412970.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:30.674Z,1516412970.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:30.695Z,1516412970.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:31.082Z,1516412971.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:31.096Z,1516412971.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:31.478Z,1516412971.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:31.498Z,1516412971.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:31.875Z,1516412971.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:31.895Z,1516412971.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:32.272Z,1516412972.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:32.291Z,1516412972.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:32.676Z,1516412972.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:32.690Z,1516412972.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:33.074Z,1516412973.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:33.088Z,1516412973.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:33.477Z,1516412973.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:33.491Z,1516412973.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:33.877Z,1516412973.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:33.891Z,1516412973.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:34.276Z,1516412974.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:34.291Z,1516412974.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:34.671Z,1516412974.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:34.685Z,1516412974.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:35.066Z,1516412975.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:35.091Z,1516412975.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:35.468Z,1516412975.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:35.486Z,1516412975.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:35.868Z,1516412975.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:35.894Z,1516412975.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:36.276Z,1516412976.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:36.290Z,1516412976.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:36.682Z,1516412976.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:36.696Z,1516412976.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:37.081Z,1516412977.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:37.103Z,1516412977.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:37.482Z,1516412977.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:37.502Z,1516412977.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:37.873Z,1516412977.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:37.887Z,1516412977.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:38.268Z,1516412978.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:38.290Z,1516412978.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:38.661Z,1516412978.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:38.695Z,1516412978.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:39.059Z,1516412979.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:39.096Z,1516412979.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:39.487Z,1516412979.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:39.507Z,1516412979.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:39.887Z,1516412979.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:39.906Z,1516412979.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:40.275Z,1516412980.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:40.302Z,1516412980.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:40.676Z,1516412980.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:40.691Z,1516412980.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:41.059Z,1516412981.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:41.093Z,1516412981.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:41.457Z,1516412981.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:41.491Z,1516412981.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:41.877Z,1516412981.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:41.892Z,1516412981.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:42.263Z,1516412982.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:42.297Z,1516412982.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:42.679Z,1516412982.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:42.701Z,1516412982.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:43.088Z,1516412983.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:43.107Z,1516412983.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:43.487Z,1516412983.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:43.501Z,1516412983.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:43.875Z,1516412983.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:43.891Z,1516412983.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:44.263Z,1516412984.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:44.295Z,1516412984.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:44.668Z,1516412984.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:44.700Z,1516412984.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:45.067Z,1516412985.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:45.098Z,1516412985.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:45.474Z,1516412985.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:45.499Z,1516412985.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:45.874Z,1516412985.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:45.908Z,1516412985.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:46.274Z,1516412986.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:46.299Z,1516412986.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:46.663Z,1516412986.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:46.698Z,1516412986.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:47.063Z,1516412987.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:47.099Z,1516412987.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:47.457Z,1516412987.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:47.471Z,1516412987.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:47.864Z,1516412987.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:47.878Z,1516412987.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:48.267Z,1516412988.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:48.281Z,1516412988.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:48.674Z,1516412988.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:48.704Z,1516412988.704 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:48.704Z,1516412988.704 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2018-01-20T01:49:48.709Z,1516412988.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:49:48.710Z,1516412988.710 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:48.711Z,1516412988.711 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2018-01-20T01:49:48.711Z,1516412988.711 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:49:48.712Z,1516412988.712 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:48.712Z,1516412988.712 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 93
2018-01-20T01:49:48.717Z,1516412988.717 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:49:48.737Z,1516412988.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:49:48.737Z,1516412988.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:49:48.737Z,1516412988.737 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:49:49.090Z,1516412989.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:49.129Z,1516412989.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:49:49.129Z,1516412989.129 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2018-01-20T01:49:49.130Z,1516412989.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:49:49.130Z,1516412989.130 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2018-01-20T01:49:49.130Z,1516412989.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:49:49.130Z,1516412989.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 93
2018-01-20T01:49:49.490Z,1516412989.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:49.517Z,1516412989.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:49:49.518Z,1516412989.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:49:49.518Z,1516412989.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:49:49.519Z,1516412989.519 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:49:49.519Z,1516412989.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:49:49.519Z,1516412989.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:49:49.520Z,1516412989.520 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:49:49.520Z,1516412989.520 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:49:49.520Z,1516412989.520 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:49:49.866Z,1516412989.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:49.880Z,1516412989.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:49:49.881Z,1516412989.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:50.272Z,1516412990.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:50.290Z,1516412990.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:49:50.291Z,1516412990.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:50.673Z,1516412990.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:50.686Z,1516412990.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:49:50.687Z,1516412990.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:51.069Z,1516412991.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:51.083Z,1516412991.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:49:51.084Z,1516412991.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:51.486Z,1516412991.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:51.515Z,1516412991.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:49:51.516Z,1516412991.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:51.878Z,1516412991.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:51.891Z,1516412991.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:49:51.892Z,1516412991.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:52.274Z,1516412992.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:52.288Z,1516412992.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:49:52.289Z,1516412992.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:52.672Z,1516412992.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:52.690Z,1516412992.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:49:52.691Z,1516412992.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:53.072Z,1516412993.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:53.086Z,1516412993.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:49:53.087Z,1516412993.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:53.460Z,1516412993.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:53.486Z,1516412993.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:49:53.486Z,1516412993.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:53.875Z,1516412993.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:53.894Z,1516412993.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:49:53.895Z,1516412993.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:54.269Z,1516412994.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:54.283Z,1516412994.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:49:54.284Z,1516412994.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:54.675Z,1516412994.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:54.694Z,1516412994.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:49:54.695Z,1516412994.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:55.082Z,1516412995.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:55.096Z,1516412995.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T01:49:55.097Z,1516412995.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:55.478Z,1516412995.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:55.498Z,1516412995.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:49:55.499Z,1516412995.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:55.870Z,1516412995.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:55.884Z,1516412995.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:49:55.885Z,1516412995.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:56.275Z,1516412996.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:56.289Z,1516412996.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:49:56.290Z,1516412996.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:56.669Z,1516412996.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:56.682Z,1516412996.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:49:56.683Z,1516412996.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:57.076Z,1516412997.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:57.090Z,1516412997.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:49:57.091Z,1516412997.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:57.477Z,1516412997.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:57.498Z,1516412997.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:49:57.499Z,1516412997.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:57.882Z,1516412997.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:57.895Z,1516412997.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:49:57.896Z,1516412997.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:58.274Z,1516412998.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:58.296Z,1516412998.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:49:58.301Z,1516412998.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:58.675Z,1516412998.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:58.694Z,1516412998.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:49:58.695Z,1516412998.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:59.076Z,1516412999.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:59.090Z,1516412999.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:49:59.091Z,1516412999.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:59.471Z,1516412999.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:59.484Z,1516412999.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:49:59.485Z,1516412999.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:49:59.869Z,1516412999.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:49:59.890Z,1516412999.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:49:59.891Z,1516412999.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:00.273Z,1516413000.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:00.286Z,1516413000.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:50:00.287Z,1516413000.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:00.682Z,1516413000.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:00.696Z,1516413000.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:50:00.698Z,1516413000.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:01.082Z,1516413001.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:01.099Z,1516413001.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:50:01.099Z,1516413001.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:01.482Z,1516413001.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:01.498Z,1516413001.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:50:01.499Z,1516413001.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:01.876Z,1516413001.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:01.894Z,1516413001.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:50:01.895Z,1516413001.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:02.271Z,1516413002.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:02.285Z,1516413002.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:50:02.286Z,1516413002.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:02.668Z,1516413002.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:02.687Z,1516413002.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:50:02.687Z,1516413002.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:03.074Z,1516413003.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:03.089Z,1516413003.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:50:03.090Z,1516413003.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:03.480Z,1516413003.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:03.495Z,1516413003.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:50:03.496Z,1516413003.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:03.881Z,1516413003.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:03.899Z,1516413003.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:50:03.900Z,1516413003.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:04.277Z,1516413004.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:04.291Z,1516413004.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:50:04.292Z,1516413004.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:04.671Z,1516413004.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:04.684Z,1516413004.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:50:04.685Z,1516413004.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:05.068Z,1516413005.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:05.086Z,1516413005.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:50:05.087Z,1516413005.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:05.469Z,1516413005.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:05.482Z,1516413005.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:50:05.483Z,1516413005.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:05.866Z,1516413005.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:05.888Z,1516413005.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:50:05.893Z,1516413005.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:06.276Z,1516413006.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:06.289Z,1516413006.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:50:06.290Z,1516413006.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:06.682Z,1516413006.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:06.696Z,1516413006.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:50:06.697Z,1516413006.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:07.090Z,1516413007.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:07.110Z,1516413007.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:50:07.111Z,1516413007.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:07.487Z,1516413007.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:07.500Z,1516413007.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:50:07.501Z,1516413007.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:07.875Z,1516413007.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:07.894Z,1516413007.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:50:07.895Z,1516413007.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:08.263Z,1516413008.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:08.294Z,1516413008.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:50:08.295Z,1516413008.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:08.664Z,1516413008.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:08.690Z,1516413008.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T01:50:08.691Z,1516413008.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:09.061Z,1516413009.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:09.091Z,1516413009.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:09.486Z,1516413009.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:09.500Z,1516413009.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:09.882Z,1516413009.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:09.896Z,1516413009.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:10.282Z,1516413010.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:10.296Z,1516413010.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:10.664Z,1516413010.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:10.695Z,1516413010.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:11.063Z,1516413011.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:11.095Z,1516413011.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:11.478Z,1516413011.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:11.492Z,1516413011.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:11.885Z,1516413011.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:11.899Z,1516413011.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:12.279Z,1516413012.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:12.299Z,1516413012.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:12.660Z,1516413012.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:12.690Z,1516413012.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:13.063Z,1516413013.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:13.088Z,1516413013.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:13.482Z,1516413013.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:13.497Z,1516413013.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:13.881Z,1516413013.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:13.895Z,1516413013.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:14.282Z,1516413014.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:14.296Z,1516413014.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:14.660Z,1516413014.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:14.695Z,1516413014.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:15.057Z,1516413015.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:15.079Z,1516413015.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:15.490Z,1516413015.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:15.511Z,1516413015.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:15.890Z,1516413015.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:15.904Z,1516413015.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:15.908Z,1516413015.908 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T01:45:15.8Z
2018-01-20T01:50:15.908Z,1516413015.908 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T01:50:15.908Z,1516413015.908 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T01:50:16.278Z,1516413016.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:16.300Z,1516413016.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:16.732Z,1516413016.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:16.751Z,1516413016.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:19.799Z,1516413019.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:19.813Z,1516413019.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:19.890Z,1516413019.890 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180119T210901/Courier0116.lzma
2018-01-20T01:50:19.930Z,1516413019.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:19.971Z,1516413019.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:20.318Z,1516413020.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:20.339Z,1516413020.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:20.679Z,1516413020.679 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0116.lzma.bak
2018-01-20T01:50:20.679Z,1516413020.679 [DataOverHttps](INFO): SBD MOMSN=7725727
2018-01-20T01:50:20.728Z,1516413020.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:20.742Z,1516413020.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:21.241Z,1516413021.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:21.263Z,1516413021.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:21.509Z,1516413021.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:21.543Z,1516413021.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:24.601Z,1516413024.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:24.615Z,1516413024.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:24.713Z,1516413024.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:24.744Z,1516413024.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:25.106Z,1516413025.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:25.133Z,1516413025.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:25.514Z,1516413025.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:25.544Z,1516413025.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:25.899Z,1516413025.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:25.913Z,1516413025.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:26.297Z,1516413026.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:26.315Z,1516413026.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:29.395Z,1516413029.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:29.409Z,1516413029.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:29.489Z,1516413029.489 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20180119T210901/Express0117.lzma
2018-01-20T01:50:29.510Z,1516413029.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:29.551Z,1516413029.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:29.884Z,1516413029.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:29.898Z,1516413029.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:30.238Z,1516413030.238 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0117.lzma.bak
2018-01-20T01:50:30.239Z,1516413030.239 [DataOverHttps](INFO): SBD MOMSN=7725730
2018-01-20T01:50:30.283Z,1516413030.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:30.307Z,1516413030.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:30.766Z,1516413030.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:30.789Z,1516413030.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:30.792Z,1516413030.792 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T01:50:30.792Z,1516413030.792 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T01:50:30.792Z,1516413030.792 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T01:50:31.064Z,1516413031.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:31.092Z,1516413031.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:34.399Z,1516413034.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:34.413Z,1516413034.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:34.512Z,1516413034.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:34.551Z,1516413034.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:34.914Z,1516413034.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:34.928Z,1516413034.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:35.318Z,1516413035.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:35.332Z,1516413035.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:35.705Z,1516413035.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:35.719Z,1516413035.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:36.103Z,1516413036.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:36.118Z,1516413036.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:36.504Z,1516413036.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:36.518Z,1516413036.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:36.899Z,1516413036.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:36.917Z,1516413036.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:37.303Z,1516413037.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:37.318Z,1516413037.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:37.706Z,1516413037.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:37.726Z,1516413037.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:38.105Z,1516413038.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:38.119Z,1516413038.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:38.506Z,1516413038.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:38.527Z,1516413038.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:38.906Z,1516413038.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:38.919Z,1516413038.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:39.290Z,1516413039.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:39.319Z,1516413039.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:39.708Z,1516413039.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:39.722Z,1516413039.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:40.106Z,1516413040.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:40.120Z,1516413040.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:40.511Z,1516413040.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:40.531Z,1516413040.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:40.908Z,1516413040.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:40.931Z,1516413040.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:41.308Z,1516413041.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:41.322Z,1516413041.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:41.705Z,1516413041.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:41.720Z,1516413041.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:42.104Z,1516413042.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:42.118Z,1516413042.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:42.510Z,1516413042.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:42.524Z,1516413042.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:42.911Z,1516413042.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:42.932Z,1516413042.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:43.308Z,1516413043.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:43.323Z,1516413043.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:43.705Z,1516413043.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:43.719Z,1516413043.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:44.103Z,1516413044.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:44.123Z,1516413044.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:44.509Z,1516413044.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:44.523Z,1516413044.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:44.909Z,1516413044.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:44.931Z,1516413044.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:45.310Z,1516413045.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:45.324Z,1516413045.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:45.706Z,1516413045.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:45.727Z,1516413045.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:46.104Z,1516413046.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:46.123Z,1516413046.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:46.508Z,1516413046.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:46.523Z,1516413046.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:46.908Z,1516413046.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:46.927Z,1516413046.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:47.311Z,1516413047.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:47.325Z,1516413047.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:47.704Z,1516413047.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:47.719Z,1516413047.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:48.104Z,1516413048.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:48.121Z,1516413048.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:48.509Z,1516413048.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:48.524Z,1516413048.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:48.910Z,1516413048.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:48.925Z,1516413048.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:49.309Z,1516413049.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:49.331Z,1516413049.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:49.706Z,1516413049.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:49.720Z,1516413049.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:50.092Z,1516413050.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:50.119Z,1516413050.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:50.513Z,1516413050.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:50.527Z,1516413050.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:50.914Z,1516413050.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:50.928Z,1516413050.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:51.309Z,1516413051.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:51.324Z,1516413051.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:51.706Z,1516413051.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:51.727Z,1516413051.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:52.104Z,1516413052.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:52.119Z,1516413052.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:52.510Z,1516413052.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:52.524Z,1516413052.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:52.913Z,1516413052.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:52.927Z,1516413052.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:53.317Z,1516413053.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:53.332Z,1516413053.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:53.704Z,1516413053.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:53.719Z,1516413053.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:54.107Z,1516413054.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:54.121Z,1516413054.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:54.509Z,1516413054.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:54.531Z,1516413054.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:54.917Z,1516413054.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:54.935Z,1516413054.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:55.313Z,1516413055.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:55.327Z,1516413055.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:55.710Z,1516413055.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:55.724Z,1516413055.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:56.091Z,1516413056.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:56.122Z,1516413056.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:56.510Z,1516413056.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:56.525Z,1516413056.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:56.915Z,1516413056.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:56.929Z,1516413056.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:57.314Z,1516413057.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:57.335Z,1516413057.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:57.704Z,1516413057.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:57.718Z,1516413057.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:58.102Z,1516413058.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:58.122Z,1516413058.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:58.502Z,1516413058.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:58.524Z,1516413058.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:58.935Z,1516413058.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:58.984Z,1516413058.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:59.315Z,1516413059.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:59.335Z,1516413059.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:50:59.702Z,1516413059.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:50:59.721Z,1516413059.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:00.111Z,1516413060.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:00.125Z,1516413060.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:00.509Z,1516413060.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:00.532Z,1516413060.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:00.918Z,1516413060.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:00.933Z,1516413060.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:01.314Z,1516413061.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:01.328Z,1516413061.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:01.695Z,1516413061.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:01.726Z,1516413061.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:02.097Z,1516413062.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:02.131Z,1516413062.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:02.520Z,1516413062.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:02.543Z,1516413062.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:02.922Z,1516413062.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:02.937Z,1516413062.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:03.315Z,1516413063.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:03.330Z,1516413063.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:03.694Z,1516413063.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:03.720Z,1516413063.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:04.092Z,1516413064.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:04.124Z,1516413064.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:04.500Z,1516413064.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:04.537Z,1516413064.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:04.915Z,1516413064.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:04.930Z,1516413064.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:05.312Z,1516413065.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:05.326Z,1516413065.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:05.693Z,1516413065.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:05.726Z,1516413065.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:06.091Z,1516413066.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:06.127Z,1516413066.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:06.500Z,1516413066.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:06.515Z,1516413066.515 [PNI_TCM](ERROR): CRC does not match. Expected:0x52116 got:0x2328
2018-01-20T01:51:06.539Z,1516413066.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:06.918Z,1516413066.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:06.933Z,1516413066.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:07.331Z,1516413067.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:07.399Z,1516413067.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:07.685Z,1516413067.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:07.726Z,1516413067.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:08.098Z,1516413068.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:08.124Z,1516413068.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:08.494Z,1516413068.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:08.532Z,1516413068.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:08.912Z,1516413068.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:08.925Z,1516413068.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:09.322Z,1516413069.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:09.336Z,1516413069.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:09.722Z,1516413069.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:09.736Z,1516413069.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:10.094Z,1516413070.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:10.127Z,1516413070.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:10.497Z,1516413070.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:10.525Z,1516413070.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:10.918Z,1516413070.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:10.933Z,1516413070.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:11.298Z,1516413071.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:11.327Z,1516413071.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:11.707Z,1516413071.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:11.731Z,1516413071.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:12.119Z,1516413072.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:12.134Z,1516413072.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:12.518Z,1516413072.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:12.533Z,1516413072.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:12.900Z,1516413072.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:12.925Z,1516413072.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:13.301Z,1516413073.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:13.335Z,1516413073.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:13.700Z,1516413073.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:13.727Z,1516413073.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:14.100Z,1516413074.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:14.127Z,1516413074.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:14.505Z,1516413074.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:14.530Z,1516413074.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:14.918Z,1516413074.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:14.932Z,1516413074.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:15.320Z,1516413075.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:15.335Z,1516413075.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:15.720Z,1516413075.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:15.735Z,1516413075.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:16.097Z,1516413076.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:16.125Z,1516413076.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:16.503Z,1516413076.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:16.519Z,1516413076.519 [PNI_TCM](ERROR): CRC does not match. Expected:0x45855 got:0x39378
2018-01-20T01:51:16.547Z,1516413076.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:16.928Z,1516413076.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:16.943Z,1516413076.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:17.300Z,1516413077.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:17.328Z,1516413077.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:17.720Z,1516413077.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:17.735Z,1516413077.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:18.123Z,1516413078.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:18.143Z,1516413078.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:18.516Z,1516413078.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:18.531Z,1516413078.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:18.893Z,1516413078.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:18.932Z,1516413078.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:19.304Z,1516413079.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:19.332Z,1516413079.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:19.695Z,1516413079.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:19.732Z,1516413079.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:20.095Z,1516413080.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:20.103Z,1516413080.103 [PNI_TCM](ERROR): CRC does not match. Expected:0x32225 got:0x16663
2018-01-20T01:51:20.136Z,1516413080.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:20.499Z,1516413080.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:20.533Z,1516413080.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:20.919Z,1516413080.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:20.938Z,1516413080.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:21.323Z,1516413081.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:21.338Z,1516413081.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:21.721Z,1516413081.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:21.743Z,1516413081.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:22.099Z,1516413082.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:22.135Z,1516413082.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:22.499Z,1516413082.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:22.537Z,1516413082.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:22.900Z,1516413082.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:22.933Z,1516413082.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:23.302Z,1516413083.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:23.337Z,1516413083.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:23.710Z,1516413083.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:23.755Z,1516413083.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:24.124Z,1516413084.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:24.132Z,1516413084.132 [PNI_TCM](ERROR): CRC does not match. Expected:0x18174 got:0x63208
2018-01-20T01:51:24.159Z,1516413084.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:24.506Z,1516413084.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:24.533Z,1516413084.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:24.892Z,1516413084.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:24.935Z,1516413084.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:25.299Z,1516413085.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:25.338Z,1516413085.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:25.698Z,1516413085.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:25.712Z,1516413085.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:26.100Z,1516413086.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:26.138Z,1516413086.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:26.496Z,1516413086.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:26.514Z,1516413086.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:26.914Z,1516413086.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:26.942Z,1516413086.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:27.310Z,1516413087.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:27.354Z,1516413087.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:27.711Z,1516413087.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:27.746Z,1516413087.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:28.095Z,1516413088.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:28.141Z,1516413088.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:28.496Z,1516413088.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:28.544Z,1516413088.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:28.899Z,1516413088.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:28.913Z,1516413088.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:29.295Z,1516413089.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:29.317Z,1516413089.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:29.713Z,1516413089.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:29.743Z,1516413089.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:30.114Z,1516413090.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:30.148Z,1516413090.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:30.501Z,1516413090.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:30.515Z,1516413090.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:30.897Z,1516413090.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:30.916Z,1516413090.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:31.303Z,1516413091.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:31.321Z,1516413091.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:34.401Z,1516413094.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:34.415Z,1516413094.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:34.522Z,1516413094.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:34.553Z,1516413094.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:34.882Z,1516413094.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:34.927Z,1516413094.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:35.294Z,1516413095.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:35.308Z,1516413095.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:35.674Z,1516413095.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:35.704Z,1516413095.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:36.065Z,1516413096.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:36.079Z,1516413096.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:36.465Z,1516413096.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:36.498Z,1516413096.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:36.877Z,1516413096.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:36.908Z,1516413096.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:37.269Z,1516413097.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:37.307Z,1516413097.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:37.683Z,1516413097.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:37.714Z,1516413097.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:38.087Z,1516413098.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:38.115Z,1516413098.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:38.483Z,1516413098.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:38.512Z,1516413098.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:38.871Z,1516413098.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:38.886Z,1516413098.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:39.260Z,1516413099.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:39.286Z,1516413099.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:39.675Z,1516413099.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:39.690Z,1516413099.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:40.073Z,1516413100.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:40.091Z,1516413100.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:40.462Z,1516413100.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:40.482Z,1516413100.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:40.876Z,1516413100.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:40.895Z,1516413100.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:41.282Z,1516413101.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:41.295Z,1516413101.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:41.674Z,1516413101.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:41.696Z,1516413101.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:42.074Z,1516413102.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:42.088Z,1516413102.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:42.472Z,1516413102.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:42.490Z,1516413102.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:42.876Z,1516413102.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:42.890Z,1516413102.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:43.271Z,1516413103.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:43.285Z,1516413103.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:43.681Z,1516413103.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:43.702Z,1516413103.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:44.080Z,1516413104.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:44.099Z,1516413104.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:44.480Z,1516413104.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:44.499Z,1516413104.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:44.876Z,1516413104.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:44.890Z,1516413104.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:45.257Z,1516413105.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:45.291Z,1516413105.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:45.674Z,1516413105.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:45.692Z,1516413105.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:46.060Z,1516413106.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:46.094Z,1516413106.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:46.461Z,1516413106.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:46.491Z,1516413106.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:46.886Z,1516413106.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:46.900Z,1516413106.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:47.286Z,1516413107.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:47.300Z,1516413107.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:47.674Z,1516413107.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:47.696Z,1516413107.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:48.063Z,1516413108.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:48.088Z,1516413108.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:48.464Z,1516413108.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:48.491Z,1516413108.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:48.861Z,1516413108.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:48.891Z,1516413108.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:49.264Z,1516413109.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:49.289Z,1516413109.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:49.682Z,1516413109.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:49.696Z,1516413109.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:50.090Z,1516413110.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:50.104Z,1516413110.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:50.478Z,1516413110.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:50.500Z,1516413110.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:50.859Z,1516413110.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:50.898Z,1516413110.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:51.261Z,1516413111.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:51.287Z,1516413111.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:51.667Z,1516413111.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:51.699Z,1516413111.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:52.060Z,1516413112.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:52.103Z,1516413112.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:52.461Z,1516413112.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:52.475Z,1516413112.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:52.874Z,1516413112.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:52.900Z,1516413112.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:53.278Z,1516413113.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:53.304Z,1516413113.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:53.674Z,1516413113.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:53.700Z,1516413113.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:54.063Z,1516413114.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:54.103Z,1516413114.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:54.467Z,1516413114.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:54.481Z,1516413114.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:54.865Z,1516413114.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:54.879Z,1516413114.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:55.267Z,1516413115.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:55.287Z,1516413115.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:55.686Z,1516413115.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:55.711Z,1516413115.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:56.086Z,1516413116.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:56.109Z,1516413116.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:56.482Z,1516413116.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:56.512Z,1516413116.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:56.869Z,1516413116.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:56.882Z,1516413116.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:57.267Z,1516413117.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:57.298Z,1516413117.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:57.676Z,1516413117.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:57.690Z,1516413117.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:58.073Z,1516413118.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:58.087Z,1516413118.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:58.462Z,1516413118.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:58.482Z,1516413118.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:58.876Z,1516413118.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:58.891Z,1516413118.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:59.282Z,1516413119.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:59.296Z,1516413119.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:51:59.675Z,1516413119.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:51:59.695Z,1516413119.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:00.074Z,1516413120.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:00.088Z,1516413120.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:00.475Z,1516413120.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:00.489Z,1516413120.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:00.875Z,1516413120.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:00.895Z,1516413120.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:01.274Z,1516413121.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:01.288Z,1516413121.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:01.677Z,1516413121.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:01.698Z,1516413121.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:02.082Z,1516413122.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:02.096Z,1516413122.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:02.475Z,1516413122.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:02.495Z,1516413122.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:02.876Z,1516413122.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:02.889Z,1516413122.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:03.271Z,1516413123.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:03.291Z,1516413123.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:03.675Z,1516413123.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:03.689Z,1516413123.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:04.073Z,1516413124.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:04.086Z,1516413124.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:04.468Z,1516413124.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:04.486Z,1516413124.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:04.876Z,1516413124.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:04.895Z,1516413124.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:05.282Z,1516413125.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:05.295Z,1516413125.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:05.675Z,1516413125.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:05.695Z,1516413125.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:06.075Z,1516413126.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:06.089Z,1516413126.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:06.476Z,1516413126.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:06.489Z,1516413126.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:06.875Z,1516413126.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:06.895Z,1516413126.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:07.271Z,1516413127.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:07.285Z,1516413127.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:07.677Z,1516413127.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:07.698Z,1516413127.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:08.077Z,1516413128.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:08.099Z,1516413128.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:08.478Z,1516413128.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:08.492Z,1516413128.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:08.875Z,1516413128.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:08.889Z,1516413128.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:09.260Z,1516413129.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:09.290Z,1516413129.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:09.675Z,1516413129.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:09.689Z,1516413129.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:10.072Z,1516413130.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:10.086Z,1516413130.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:10.462Z,1516413130.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:10.483Z,1516413130.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:10.877Z,1516413130.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:10.899Z,1516413130.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:11.282Z,1516413131.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:11.295Z,1516413131.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:11.678Z,1516413131.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:11.692Z,1516413131.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:12.071Z,1516413132.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:12.085Z,1516413132.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:12.472Z,1516413132.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:12.486Z,1516413132.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:12.876Z,1516413132.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:12.891Z,1516413132.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:13.277Z,1516413133.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:13.291Z,1516413133.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:13.682Z,1516413133.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:13.696Z,1516413133.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:14.082Z,1516413134.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:14.096Z,1516413134.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:14.479Z,1516413134.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:14.493Z,1516413134.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:14.873Z,1516413134.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:14.886Z,1516413134.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:15.257Z,1516413135.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:15.288Z,1516413135.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:15.667Z,1516413135.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:15.699Z,1516413135.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:16.068Z,1516413136.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:16.095Z,1516413136.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:16.457Z,1516413136.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:16.479Z,1516413136.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:16.887Z,1516413136.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:16.901Z,1516413136.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:17.286Z,1516413137.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:17.301Z,1516413137.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:17.682Z,1516413137.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:17.697Z,1516413137.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:18.063Z,1516413138.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:18.095Z,1516413138.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:18.467Z,1516413138.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:18.500Z,1516413138.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:18.868Z,1516413138.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:18.898Z,1516413138.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:19.263Z,1516413139.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:19.298Z,1516413139.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:19.670Z,1516413139.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:19.703Z,1516413139.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:20.090Z,1516413140.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:20.104Z,1516413140.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:20.474Z,1516413140.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:20.506Z,1516413140.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:20.864Z,1516413140.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:20.902Z,1516413140.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:21.259Z,1516413141.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:21.295Z,1516413141.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:21.674Z,1516413141.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:21.699Z,1516413141.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:22.078Z,1516413142.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:22.104Z,1516413142.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:22.474Z,1516413142.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:22.499Z,1516413142.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:22.864Z,1516413142.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:22.878Z,1516413142.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:23.267Z,1516413143.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:23.281Z,1516413143.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:23.678Z,1516413143.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:23.708Z,1516413143.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:24.086Z,1516413144.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:24.110Z,1516413144.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:24.474Z,1516413144.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:24.512Z,1516413144.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:24.865Z,1516413144.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:24.879Z,1516413144.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:25.268Z,1516413145.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:25.287Z,1516413145.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:25.686Z,1516413145.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:25.709Z,1516413145.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:26.086Z,1516413146.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:26.107Z,1516413146.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:26.478Z,1516413146.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:26.492Z,1516413146.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:26.872Z,1516413146.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:26.886Z,1516413146.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:27.265Z,1516413147.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:27.287Z,1516413147.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:27.682Z,1516413147.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:27.696Z,1516413147.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:28.078Z,1516413148.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:28.092Z,1516413148.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:28.471Z,1516413148.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:28.495Z,1516413148.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:28.870Z,1516413148.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:28.890Z,1516413148.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:29.273Z,1516413149.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:29.287Z,1516413149.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:29.679Z,1516413149.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:29.693Z,1516413149.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:30.083Z,1516413150.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:30.097Z,1516413150.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:30.479Z,1516413150.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:30.492Z,1516413150.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:30.876Z,1516413150.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:30.891Z,1516413150.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:31.275Z,1516413151.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:31.295Z,1516413151.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:31.679Z,1516413151.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:31.694Z,1516413151.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:34.775Z,1516413154.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:34.789Z,1516413154.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:34.902Z,1516413154.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:34.947Z,1516413154.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:35.254Z,1516413155.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:35.279Z,1516413155.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:35.668Z,1516413155.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:35.682Z,1516413155.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:36.056Z,1516413156.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:36.081Z,1516413156.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:36.466Z,1516413156.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:36.487Z,1516413156.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:36.868Z,1516413156.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:36.888Z,1516413156.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:37.262Z,1516413157.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:37.283Z,1516413157.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:37.670Z,1516413157.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:37.684Z,1516413157.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:38.047Z,1516413158.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:38.079Z,1516413158.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:38.449Z,1516413158.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:38.482Z,1516413158.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:38.852Z,1516413158.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:38.877Z,1516413158.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:39.247Z,1516413159.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:39.283Z,1516413159.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:39.666Z,1516413159.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:39.680Z,1516413159.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:40.074Z,1516413160.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:40.088Z,1516413160.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:40.467Z,1516413160.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:40.481Z,1516413160.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:40.856Z,1516413160.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:40.881Z,1516413160.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:41.251Z,1516413161.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:41.276Z,1516413161.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:41.667Z,1516413161.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:41.681Z,1516413161.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:42.078Z,1516413162.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:42.092Z,1516413162.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:42.470Z,1516413162.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:42.484Z,1516413162.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:42.852Z,1516413162.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:42.884Z,1516413162.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:43.245Z,1516413163.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:43.267Z,1516413163.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:43.674Z,1516413163.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:43.688Z,1516413163.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:44.074Z,1516413164.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:44.088Z,1516413164.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:44.466Z,1516413164.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:44.487Z,1516413164.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:44.852Z,1516413164.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:44.882Z,1516413164.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:45.255Z,1516413165.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:45.288Z,1516413165.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:45.658Z,1516413165.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:45.692Z,1516413165.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:46.074Z,1516413166.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:46.088Z,1516413166.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:46.458Z,1516413166.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:46.491Z,1516413166.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:46.850Z,1516413166.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:46.864Z,1516413166.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:47.255Z,1516413167.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:47.290Z,1516413167.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:47.662Z,1516413167.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:47.689Z,1516413167.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:48.079Z,1516413168.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:48.093Z,1516413168.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:48.462Z,1516413168.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:48.487Z,1516413168.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:48.852Z,1516413168.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:48.894Z,1516413168.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:49.245Z,1516413169.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:49.259Z,1516413169.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:49.662Z,1516413169.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:49.687Z,1516413169.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:49.687Z,1516413169.687 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2018-01-20T01:52:49.687Z,1516413169.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:52:49.689Z,1516413169.689 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:49.689Z,1516413169.689 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2018-01-20T01:52:49.689Z,1516413169.689 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:52:49.691Z,1516413169.691 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:49.691Z,1516413169.691 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 94
2018-01-20T01:52:49.691Z,1516413169.691 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:52:49.703Z,1516413169.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:52:49.703Z,1516413169.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:52:49.703Z,1516413169.703 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:52:50.062Z,1516413170.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:50.100Z,1516413170.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:52:50.100Z,1516413170.100 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2018-01-20T01:52:50.101Z,1516413170.101 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:52:50.101Z,1516413170.101 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2018-01-20T01:52:50.102Z,1516413170.102 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:52:50.102Z,1516413170.102 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 94
2018-01-20T01:52:50.462Z,1516413170.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:50.480Z,1516413170.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:52:50.481Z,1516413170.481 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:52:50.481Z,1516413170.481 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:52:50.482Z,1516413170.482 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:52:50.482Z,1516413170.482 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:52:50.482Z,1516413170.482 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:52:50.483Z,1516413170.483 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:52:50.483Z,1516413170.483 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:52:50.483Z,1516413170.483 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:52:50.856Z,1516413170.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:50.870Z,1516413170.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:52:50.871Z,1516413170.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:51.256Z,1516413171.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:51.269Z,1516413171.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:52:51.270Z,1516413171.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:51.666Z,1516413171.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:51.696Z,1516413171.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:52:51.697Z,1516413171.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:52.074Z,1516413172.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:52.098Z,1516413172.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:52:52.099Z,1516413172.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:52.470Z,1516413172.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:52.501Z,1516413172.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:52:52.502Z,1516413172.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:52.854Z,1516413172.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:52.868Z,1516413172.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:52:52.869Z,1516413172.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:53.258Z,1516413173.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:53.272Z,1516413173.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:52:53.273Z,1516413173.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:53.655Z,1516413173.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:53.669Z,1516413173.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:52:53.670Z,1516413173.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:54.062Z,1516413174.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:54.077Z,1516413174.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:52:54.078Z,1516413174.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:54.471Z,1516413174.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:54.484Z,1516413174.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:52:54.497Z,1516413174.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:54.875Z,1516413174.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:54.888Z,1516413174.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:52:54.912Z,1516413174.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:55.249Z,1516413175.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:55.267Z,1516413175.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:52:55.268Z,1516413175.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:55.659Z,1516413175.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:55.678Z,1516413175.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:52:55.679Z,1516413175.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:56.064Z,1516413176.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:56.077Z,1516413176.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-20T01:52:56.078Z,1516413176.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:56.450Z,1516413176.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:56.470Z,1516413176.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:52:56.471Z,1516413176.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:56.876Z,1516413176.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:56.894Z,1516413176.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:52:56.895Z,1516413176.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:57.270Z,1516413177.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:57.283Z,1516413177.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:52:57.284Z,1516413177.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:57.670Z,1516413177.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:57.684Z,1516413177.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:52:57.685Z,1516413177.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:58.051Z,1516413178.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:58.086Z,1516413178.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:52:58.087Z,1516413178.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:58.455Z,1516413178.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:58.481Z,1516413178.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:52:58.482Z,1516413178.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:58.849Z,1516413178.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:58.882Z,1516413178.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:52:58.883Z,1516413178.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:59.252Z,1516413179.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:59.282Z,1516413179.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:52:59.283Z,1516413179.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:52:59.647Z,1516413179.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:52:59.679Z,1516413179.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:52:59.680Z,1516413179.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:00.062Z,1516413180.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:00.083Z,1516413180.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:53:00.084Z,1516413180.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:00.474Z,1516413180.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:00.487Z,1516413180.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:53:00.488Z,1516413180.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:00.867Z,1516413180.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:00.886Z,1516413180.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:53:00.887Z,1516413180.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:01.249Z,1516413181.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:01.282Z,1516413181.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:53:01.283Z,1516413181.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:01.651Z,1516413181.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:01.675Z,1516413181.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:53:01.676Z,1516413181.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:02.052Z,1516413182.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:02.082Z,1516413182.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:53:02.083Z,1516413182.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:02.445Z,1516413182.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:02.467Z,1516413182.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:53:02.468Z,1516413182.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:02.874Z,1516413182.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:02.888Z,1516413182.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:53:02.889Z,1516413182.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:03.270Z,1516413183.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:03.294Z,1516413183.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:53:03.295Z,1516413183.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:03.674Z,1516413183.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:03.688Z,1516413183.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:53:03.689Z,1516413183.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:04.051Z,1516413184.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:04.085Z,1516413184.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:53:04.086Z,1516413184.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:04.451Z,1516413184.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:04.486Z,1516413184.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:53:04.487Z,1516413184.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:04.849Z,1516413184.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:04.871Z,1516413184.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:53:04.872Z,1516413184.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:05.252Z,1516413185.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:05.282Z,1516413185.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:53:05.283Z,1516413185.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:05.655Z,1516413185.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:05.694Z,1516413185.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:53:05.695Z,1516413185.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:06.066Z,1516413186.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:06.092Z,1516413186.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:53:06.093Z,1516413186.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:06.466Z,1516413186.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:06.502Z,1516413186.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:53:06.503Z,1516413186.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:06.870Z,1516413186.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:06.902Z,1516413186.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:53:06.903Z,1516413186.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:07.254Z,1516413187.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:07.287Z,1516413187.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:53:07.288Z,1516413187.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:07.661Z,1516413187.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:07.674Z,1516413187.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:53:07.675Z,1516413187.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:08.063Z,1516413188.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:08.076Z,1516413188.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:53:08.077Z,1516413188.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:08.455Z,1516413188.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:08.473Z,1516413188.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:53:08.474Z,1516413188.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:08.863Z,1516413188.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:08.878Z,1516413188.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:53:08.879Z,1516413188.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:09.275Z,1516413189.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:09.310Z,1516413189.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:53:09.311Z,1516413189.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:09.660Z,1516413189.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:09.679Z,1516413189.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-20T01:53:09.680Z,1516413189.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:10.060Z,1516413190.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:10.075Z,1516413190.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:10.457Z,1516413190.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:10.471Z,1516413190.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:10.853Z,1516413190.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:10.875Z,1516413190.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:11.263Z,1516413191.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:11.283Z,1516413191.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:11.664Z,1516413191.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:11.678Z,1516413191.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:12.066Z,1516413192.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:12.081Z,1516413192.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:12.466Z,1516413192.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:12.480Z,1516413192.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:12.865Z,1516413192.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:12.889Z,1516413192.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:13.250Z,1516413193.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:13.277Z,1516413193.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:13.670Z,1516413193.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:13.714Z,1516413193.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:14.091Z,1516413194.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:14.125Z,1516413194.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:14.459Z,1516413194.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:14.473Z,1516413194.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:14.871Z,1516413194.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:14.895Z,1516413194.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:15.277Z,1516413195.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:15.300Z,1516413195.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:15.664Z,1516413195.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:15.692Z,1516413195.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:16.053Z,1516413196.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:16.092Z,1516413196.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:16.486Z,1516413196.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:16.510Z,1516413196.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:16.854Z,1516413196.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:16.892Z,1516413196.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:17.286Z,1516413197.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:17.325Z,1516413197.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:17.658Z,1516413197.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:17.704Z,1516413197.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:18.064Z,1516413198.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:18.115Z,1516413198.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:18.486Z,1516413198.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:18.539Z,1516413198.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:18.864Z,1516413198.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:18.934Z,1516413198.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:19.253Z,1516413199.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:19.316Z,1516413199.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:19.662Z,1516413199.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:19.705Z,1516413199.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:20.071Z,1516413200.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:20.128Z,1516413200.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:20.461Z,1516413200.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:20.479Z,1516413200.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:20.871Z,1516413200.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:20.932Z,1516413200.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:21.267Z,1516413201.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:21.310Z,1516413201.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:21.672Z,1516413201.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:21.695Z,1516413201.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:22.053Z,1516413202.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:22.090Z,1516413202.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:22.479Z,1516413202.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:22.506Z,1516413202.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:22.855Z,1516413202.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:22.899Z,1516413202.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:23.261Z,1516413203.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:23.287Z,1516413203.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:23.662Z,1516413203.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:23.685Z,1516413203.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:24.071Z,1516413204.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:24.118Z,1516413204.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:24.471Z,1516413204.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:24.515Z,1516413204.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:24.869Z,1516413204.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:24.922Z,1516413204.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:25.263Z,1516413205.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:25.285Z,1516413205.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:25.669Z,1516413205.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:25.688Z,1516413205.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:26.054Z,1516413206.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:26.121Z,1516413206.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:26.452Z,1516413206.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:26.479Z,1516413206.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:26.866Z,1516413206.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:26.896Z,1516413206.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:27.285Z,1516413207.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:27.307Z,1516413207.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:27.676Z,1516413207.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:27.690Z,1516413207.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:28.056Z,1516413208.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:28.087Z,1516413208.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:28.460Z,1516413208.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:28.475Z,1516413208.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:28.872Z,1516413208.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:28.903Z,1516413208.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:29.259Z,1516413209.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:29.274Z,1516413209.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:29.656Z,1516413209.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:29.671Z,1516413209.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:30.063Z,1516413210.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:30.085Z,1516413210.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:30.467Z,1516413210.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:30.481Z,1516413210.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:30.861Z,1516413210.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:30.883Z,1516413210.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:31.255Z,1516413211.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:31.275Z,1516413211.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:31.660Z,1516413211.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:31.675Z,1516413211.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:32.057Z,1516413212.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:32.071Z,1516413212.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:35.412Z,1516413215.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:35.451Z,1516413215.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:35.556Z,1516413215.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:35.575Z,1516413215.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:35.928Z,1516413215.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:35.959Z,1516413215.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:36.334Z,1516413216.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:36.359Z,1516413216.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:36.719Z,1516413216.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:36.762Z,1516413216.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:37.121Z,1516413217.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:37.162Z,1516413217.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:37.508Z,1516413217.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:37.553Z,1516413217.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:37.934Z,1516413217.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:37.950Z,1516413217.950 [PNI_TCM](ERROR): CRC does not match. Expected:0x16081 got:0x7489
2018-01-20T01:53:37.975Z,1516413217.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:38.336Z,1516413218.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:38.364Z,1516413218.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:38.723Z,1516413218.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:38.756Z,1516413218.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:39.122Z,1516413219.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:39.136Z,1516413219.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:39.522Z,1516413219.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:39.543Z,1516413219.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:39.916Z,1516413219.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:39.958Z,1516413219.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:40.321Z,1516413220.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:40.339Z,1516413220.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:40.723Z,1516413220.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:40.738Z,1516413220.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:41.124Z,1516413221.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:41.143Z,1516413221.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:41.534Z,1516413221.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:41.570Z,1516413221.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:41.935Z,1516413221.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:41.943Z,1516413221.943 [PNI_TCM](ERROR): CRC does not match. Expected:0x48065 got:0x49481
2018-01-20T01:53:41.978Z,1516413221.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:42.308Z,1516413222.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:42.347Z,1516413222.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:42.719Z,1516413222.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:42.726Z,1516413222.726 [PNI_TCM](ERROR): CRC does not match. Expected:0x15039 got:0x3268
2018-01-20T01:53:42.743Z,1516413222.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:43.121Z,1516413223.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:43.164Z,1516413223.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:43.517Z,1516413223.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:43.541Z,1516413223.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:43.923Z,1516413223.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:43.940Z,1516413223.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:44.328Z,1516413224.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:44.342Z,1516413224.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:44.720Z,1516413224.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:44.761Z,1516413224.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:45.120Z,1516413225.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:45.142Z,1516413225.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:45.521Z,1516413225.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:45.538Z,1516413225.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:45.923Z,1516413225.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:45.943Z,1516413225.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:46.321Z,1516413226.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:46.364Z,1516413226.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:46.721Z,1516413226.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:46.742Z,1516413226.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:47.127Z,1516413227.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:47.144Z,1516413227.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:47.531Z,1516413227.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:47.567Z,1516413227.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:47.926Z,1516413227.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:47.969Z,1516413227.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:48.315Z,1516413228.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:48.329Z,1516413228.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:48.719Z,1516413228.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:48.737Z,1516413228.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:49.126Z,1516413229.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:49.141Z,1516413229.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:49.510Z,1516413229.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:49.552Z,1516413229.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:49.926Z,1516413229.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:49.942Z,1516413229.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:50.331Z,1516413230.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:50.348Z,1516413230.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:50.730Z,1516413230.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:50.744Z,1516413230.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:51.124Z,1516413231.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:51.166Z,1516413231.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:51.525Z,1516413231.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:51.551Z,1516413231.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:51.924Z,1516413231.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:51.945Z,1516413231.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:52.327Z,1516413232.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:52.343Z,1516413232.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:52.725Z,1516413232.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:52.768Z,1516413232.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:53.126Z,1516413233.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:53.140Z,1516413233.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:53.530Z,1516413233.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:53.551Z,1516413233.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:53.932Z,1516413233.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:53.948Z,1516413233.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:54.324Z,1516413234.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:54.367Z,1516413234.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:54.724Z,1516413234.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:54.743Z,1516413234.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:55.117Z,1516413235.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:55.131Z,1516413235.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:55.510Z,1516413235.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:55.543Z,1516413235.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:55.932Z,1516413235.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:55.951Z,1516413235.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:56.334Z,1516413236.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:56.348Z,1516413236.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:56.749Z,1516413236.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:56.776Z,1516413236.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:57.114Z,1516413237.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:57.147Z,1516413237.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:57.524Z,1516413237.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:57.537Z,1516413237.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:57.907Z,1516413237.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:57.938Z,1516413237.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:58.318Z,1516413238.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:58.337Z,1516413238.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:58.723Z,1516413238.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:58.741Z,1516413238.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:59.133Z,1516413239.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:59.147Z,1516413239.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:59.532Z,1516413239.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:59.551Z,1516413239.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:53:59.934Z,1516413239.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:53:59.957Z,1516413239.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:00.323Z,1516413240.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:00.346Z,1516413240.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:00.723Z,1516413240.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:00.737Z,1516413240.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:01.108Z,1516413241.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:01.142Z,1516413241.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:01.507Z,1516413241.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:01.538Z,1516413241.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:01.932Z,1516413241.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:01.951Z,1516413241.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:02.333Z,1516413242.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:02.347Z,1516413242.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:02.733Z,1516413242.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:02.747Z,1516413242.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:03.114Z,1516413243.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:03.136Z,1516413243.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:03.507Z,1516413243.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:03.539Z,1516413243.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:03.923Z,1516413243.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:03.943Z,1516413243.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:04.318Z,1516413244.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:04.337Z,1516413244.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:04.707Z,1516413244.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:04.741Z,1516413244.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:05.132Z,1516413245.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:05.154Z,1516413245.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:05.533Z,1516413245.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:05.555Z,1516413245.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:05.935Z,1516413245.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:05.949Z,1516413245.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:06.322Z,1516413246.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:06.340Z,1516413246.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:06.711Z,1516413246.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:06.742Z,1516413246.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:07.124Z,1516413247.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:07.138Z,1516413247.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:07.523Z,1516413247.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:07.543Z,1516413247.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:07.930Z,1516413247.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:07.944Z,1516413247.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:08.337Z,1516413248.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:08.354Z,1516413248.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:08.730Z,1516413248.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:08.744Z,1516413248.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:09.111Z,1516413249.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:09.143Z,1516413249.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:09.525Z,1516413249.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:09.538Z,1516413249.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:09.924Z,1516413249.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:09.943Z,1516413249.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:10.312Z,1516413250.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:10.338Z,1516413250.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:10.712Z,1516413250.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:10.744Z,1516413250.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:11.131Z,1516413251.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:11.145Z,1516413251.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:11.537Z,1516413251.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:11.578Z,1516413251.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:11.940Z,1516413251.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:11.962Z,1516413251.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:12.325Z,1516413252.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:12.343Z,1516413252.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:12.712Z,1516413252.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:12.748Z,1516413252.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:13.127Z,1516413253.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:13.152Z,1516413253.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:13.511Z,1516413253.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:13.547Z,1516413253.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:13.932Z,1516413253.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:13.947Z,1516413253.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:14.332Z,1516413254.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:14.346Z,1516413254.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:14.730Z,1516413254.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:14.750Z,1516413254.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:15.111Z,1516413255.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:15.138Z,1516413255.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:15.506Z,1516413255.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:15.545Z,1516413255.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:15.911Z,1516413255.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:15.937Z,1516413255.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:16.312Z,1516413256.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:16.343Z,1516413256.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:16.707Z,1516413256.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:16.743Z,1516413256.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:17.133Z,1516413257.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:17.148Z,1516413257.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:17.532Z,1516413257.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:17.550Z,1516413257.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:17.927Z,1516413257.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:17.942Z,1516413257.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:18.330Z,1516413258.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:18.349Z,1516413258.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:18.711Z,1516413258.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:18.742Z,1516413258.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:19.108Z,1516413259.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:19.143Z,1516413259.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:19.515Z,1516413259.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:19.540Z,1516413259.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:19.930Z,1516413259.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:19.944Z,1516413259.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:20.331Z,1516413260.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:20.345Z,1516413260.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:20.734Z,1516413260.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:20.748Z,1516413260.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:21.111Z,1516413261.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:21.146Z,1516413261.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:21.507Z,1516413261.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:21.543Z,1516413261.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:21.915Z,1516413261.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:21.940Z,1516413261.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:22.312Z,1516413262.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:22.342Z,1516413262.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:22.707Z,1516413262.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:22.743Z,1516413262.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:23.134Z,1516413263.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:23.148Z,1516413263.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:23.531Z,1516413263.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:23.551Z,1516413263.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:23.918Z,1516413263.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:23.951Z,1516413263.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:24.315Z,1516413264.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:24.340Z,1516413264.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:24.711Z,1516413264.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:24.743Z,1516413264.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:25.116Z,1516413265.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:25.147Z,1516413265.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:25.515Z,1516413265.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:25.546Z,1516413265.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:25.922Z,1516413265.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:25.948Z,1516413265.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:26.322Z,1516413266.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:26.348Z,1516413266.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:26.734Z,1516413266.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:26.748Z,1516413266.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:27.111Z,1516413267.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:27.146Z,1516413267.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:27.507Z,1516413267.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:27.550Z,1516413267.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:27.915Z,1516413267.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:27.946Z,1516413267.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:28.316Z,1516413268.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:28.346Z,1516413268.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:28.711Z,1516413268.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:28.747Z,1516413268.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:29.122Z,1516413269.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:29.147Z,1516413269.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:29.526Z,1516413269.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:29.559Z,1516413269.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:29.922Z,1516413269.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:29.950Z,1516413269.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:30.309Z,1516413270.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:30.323Z,1516413270.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:30.711Z,1516413270.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:30.731Z,1516413270.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:31.120Z,1516413271.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:31.134Z,1516413271.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:31.506Z,1516413271.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:31.524Z,1516413271.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:31.922Z,1516413271.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:31.937Z,1516413271.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:32.323Z,1516413272.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:32.337Z,1516413272.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:35.434Z,1516413275.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:35.469Z,1516413275.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:35.552Z,1516413275.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:35.599Z,1516413275.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:35.929Z,1516413275.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:35.944Z,1516413275.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:36.332Z,1516413276.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:36.347Z,1516413276.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:36.732Z,1516413276.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:36.746Z,1516413276.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:37.146Z,1516413277.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:37.177Z,1516413277.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:37.530Z,1516413277.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:37.544Z,1516413277.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:37.938Z,1516413277.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:37.952Z,1516413277.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:38.328Z,1516413278.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:38.342Z,1516413278.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:38.728Z,1516413278.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:38.742Z,1516413278.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:39.133Z,1516413279.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:39.147Z,1516413279.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:39.532Z,1516413279.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:39.546Z,1516413279.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:39.946Z,1516413279.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:39.976Z,1516413279.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:40.342Z,1516413280.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:40.356Z,1516413280.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:40.746Z,1516413280.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:40.779Z,1516413280.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:41.129Z,1516413281.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:41.143Z,1516413281.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:41.532Z,1516413281.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:41.546Z,1516413281.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:41.932Z,1516413281.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:41.946Z,1516413281.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:42.333Z,1516413282.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:42.347Z,1516413282.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:42.732Z,1516413282.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:42.746Z,1516413282.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:43.146Z,1516413283.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:43.179Z,1516413283.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:43.534Z,1516413283.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:43.548Z,1516413283.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:43.946Z,1516413283.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:43.960Z,1516413283.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:44.335Z,1516413284.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:44.349Z,1516413284.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:44.722Z,1516413284.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:44.743Z,1516413284.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:45.131Z,1516413285.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:45.146Z,1516413285.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:45.531Z,1516413285.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:45.545Z,1516413285.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:45.938Z,1516413285.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:45.953Z,1516413285.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:46.342Z,1516413286.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:46.356Z,1516413286.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:46.738Z,1516413286.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:46.758Z,1516413286.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:47.135Z,1516413287.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:47.149Z,1516413287.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:47.531Z,1516413287.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:47.545Z,1516413287.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:47.932Z,1516413287.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:47.951Z,1516413287.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:48.336Z,1516413288.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:48.351Z,1516413288.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:48.734Z,1516413288.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:48.749Z,1516413288.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:49.138Z,1516413289.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:49.152Z,1516413289.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:49.534Z,1516413289.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:49.556Z,1516413289.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:49.941Z,1516413289.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:49.955Z,1516413289.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:50.333Z,1516413290.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:50.350Z,1516413290.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:50.729Z,1516413290.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:50.755Z,1516413290.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:51.133Z,1516413291.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:51.147Z,1516413291.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:51.520Z,1516413291.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:51.546Z,1516413291.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:51.946Z,1516413291.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:51.967Z,1516413291.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:52.345Z,1516413292.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:52.359Z,1516413292.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:52.746Z,1516413292.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:52.760Z,1516413292.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:53.132Z,1516413293.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:53.155Z,1516413293.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:53.536Z,1516413293.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:53.551Z,1516413293.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:53.936Z,1516413293.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:53.995Z,1516413293.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:54.330Z,1516413294.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:54.346Z,1516413294.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:54.726Z,1516413294.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:54.760Z,1516413294.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:55.147Z,1516413295.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:55.162Z,1516413295.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:55.536Z,1516413295.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:55.567Z,1516413295.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:55.944Z,1516413295.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:55.958Z,1516413295.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:56.323Z,1516413296.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:56.356Z,1516413296.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:56.717Z,1516413296.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:56.731Z,1516413296.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:57.128Z,1516413297.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:57.166Z,1516413297.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:57.523Z,1516413297.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:57.559Z,1516413297.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:57.930Z,1516413297.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:57.956Z,1516413297.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:58.346Z,1516413298.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:58.363Z,1516413298.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:58.734Z,1516413298.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:58.767Z,1516413298.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:59.121Z,1516413299.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:59.135Z,1516413299.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:59.527Z,1516413299.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:59.562Z,1516413299.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:54:59.923Z,1516413299.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:54:59.938Z,1516413299.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:00.324Z,1516413300.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:00.339Z,1516413300.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:00.731Z,1516413300.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:00.767Z,1516413300.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:01.142Z,1516413301.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:01.173Z,1516413301.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:01.530Z,1516413301.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:01.544Z,1516413301.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:01.942Z,1516413301.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:01.973Z,1516413301.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:02.328Z,1516413302.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:02.347Z,1516413302.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:02.732Z,1516413302.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:02.747Z,1516413302.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:03.129Z,1516413303.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:03.143Z,1516413303.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:03.528Z,1516413303.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:03.547Z,1516413303.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:03.934Z,1516413303.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:03.949Z,1516413303.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:04.342Z,1516413304.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:04.356Z,1516413304.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:04.746Z,1516413304.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:04.760Z,1516413304.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:05.135Z,1516413305.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:05.149Z,1516413305.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:05.535Z,1516413305.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:05.549Z,1516413305.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:05.932Z,1516413305.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:05.977Z,1516413305.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:06.336Z,1516413306.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:06.350Z,1516413306.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:06.731Z,1516413306.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:06.751Z,1516413306.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:07.142Z,1516413307.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:07.156Z,1516413307.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:07.541Z,1516413307.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:07.563Z,1516413307.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:07.941Z,1516413307.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:07.955Z,1516413307.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:08.331Z,1516413308.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:08.346Z,1516413308.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:08.731Z,1516413308.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:08.751Z,1516413308.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:09.136Z,1516413309.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:09.150Z,1516413309.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:09.536Z,1516413309.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:09.555Z,1516413309.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:09.943Z,1516413309.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:09.957Z,1516413309.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:10.341Z,1516413310.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:10.355Z,1516413310.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:10.742Z,1516413310.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:10.756Z,1516413310.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:11.136Z,1516413311.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:11.155Z,1516413311.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:11.536Z,1516413311.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:11.550Z,1516413311.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:11.944Z,1516413311.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:11.958Z,1516413311.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:12.329Z,1516413312.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:12.351Z,1516413312.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:12.736Z,1516413312.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:12.751Z,1516413312.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:13.144Z,1516413313.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:13.158Z,1516413313.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:13.543Z,1516413313.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:13.557Z,1516413313.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:13.939Z,1516413313.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:13.954Z,1516413313.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:14.331Z,1516413314.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:14.350Z,1516413314.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:14.736Z,1516413314.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:14.755Z,1516413314.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:15.120Z,1516413315.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:15.151Z,1516413315.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:15.526Z,1516413315.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:15.557Z,1516413315.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:15.947Z,1516413315.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:15.962Z,1516413315.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:16.342Z,1516413316.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:16.356Z,1516413316.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:16.743Z,1516413316.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:16.757Z,1516413316.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:17.120Z,1516413317.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:17.154Z,1516413317.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:17.527Z,1516413317.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:17.552Z,1516413317.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:17.943Z,1516413317.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:17.957Z,1516413317.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:18.342Z,1516413318.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:18.360Z,1516413318.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:18.729Z,1516413318.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:18.754Z,1516413318.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:19.128Z,1516413319.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:19.154Z,1516413319.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:19.519Z,1516413319.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:19.555Z,1516413319.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:19.930Z,1516413319.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:19.962Z,1516413319.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:20.347Z,1516413320.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:20.361Z,1516413320.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:20.742Z,1516413320.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:20.756Z,1516413320.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:21.120Z,1516413321.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:21.146Z,1516413321.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:21.527Z,1516413321.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:21.559Z,1516413321.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:21.930Z,1516413321.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:21.957Z,1516413321.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:22.334Z,1516413322.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:22.376Z,1516413322.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:22.738Z,1516413322.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:22.763Z,1516413322.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:23.124Z,1516413323.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:23.138Z,1516413323.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:23.531Z,1516413323.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:23.545Z,1516413323.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:23.942Z,1516413323.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:23.966Z,1516413323.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:24.338Z,1516413324.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:24.368Z,1516413324.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:24.741Z,1516413324.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:24.771Z,1516413324.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:25.133Z,1516413325.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:25.147Z,1516413325.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:25.529Z,1516413325.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:25.543Z,1516413325.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:25.946Z,1516413325.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:25.976Z,1516413325.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:26.342Z,1516413326.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:26.356Z,1516413326.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:26.747Z,1516413326.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:26.781Z,1516413326.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:27.134Z,1516413327.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:27.148Z,1516413327.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:27.537Z,1516413327.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:27.551Z,1516413327.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:27.935Z,1516413327.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:27.967Z,1516413327.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:28.341Z,1516413328.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:28.355Z,1516413328.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:28.743Z,1516413328.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:28.763Z,1516413328.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:29.134Z,1516413329.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:29.148Z,1516413329.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:29.528Z,1516413329.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:29.543Z,1516413329.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:29.939Z,1516413329.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:29.962Z,1516413329.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:30.346Z,1516413330.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:30.360Z,1516413330.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:30.747Z,1516413330.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:30.761Z,1516413330.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:31.149Z,1516413331.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:31.164Z,1516413331.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:31.167Z,1516413331.167 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T01:55:31.167Z,1516413331.167 [Default:CheckIn:C.Wait] Stopped
2018-01-20T01:55:31.167Z,1516413331.167 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T01:55:31.167Z,1516413331.167 [Default:CheckIn:D] Running Loop=1
2018-01-20T01:55:31.519Z,1516413331.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:31.556Z,1516413331.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:31.559Z,1516413331.559 [Default:CheckIn:D] Stopped
2018-01-20T01:55:31.559Z,1516413331.559 [Default:CheckIn:E] Running Loop=1
2018-01-20T01:55:31.940Z,1516413331.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:31.959Z,1516413331.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:31.962Z,1516413331.962 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.093992 min 
2018-01-20T01:55:31.962Z,1516413331.962 [Default:CheckIn:E] Stopped
2018-01-20T01:55:31.963Z,1516413331.963 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T01:55:31.963Z,1516413331.963 [Default:CheckIn] Stopped
2018-01-20T01:55:31.963Z,1516413331.963 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T01:55:31.963Z,1516413331.963 [Default:CheckIn](INFO): Running loop #3
2018-01-20T01:55:31.963Z,1516413331.963 [Default:CheckIn] Running Loop=3
2018-01-20T01:55:31.963Z,1516413331.963 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T01:55:31.963Z,1516413331.963 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T01:55:32.343Z,1516413332.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:32.375Z,1516413332.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:35.604Z,1516413335.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:35.623Z,1516413335.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:35.742Z,1516413335.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:35.762Z,1516413335.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:36.087Z,1516413336.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:36.131Z,1516413336.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:36.494Z,1516413336.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:36.513Z,1516413336.513 [PNI_TCM](ERROR): CRC does not match. Expected:0x60251 got:0x49543
2018-01-20T01:55:36.542Z,1516413336.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:36.891Z,1516413336.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:36.931Z,1516413336.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:37.320Z,1516413337.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:37.335Z,1516413337.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:37.705Z,1516413337.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:37.731Z,1516413337.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:38.103Z,1516413338.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:38.130Z,1516413338.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:38.499Z,1516413338.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:38.546Z,1516413338.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:38.895Z,1516413338.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:38.928Z,1516413338.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:39.293Z,1516413339.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:39.326Z,1516413339.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:39.692Z,1516413339.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:39.729Z,1516413339.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:40.102Z,1516413340.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:40.147Z,1516413340.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:40.510Z,1516413340.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:40.538Z,1516413340.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:40.911Z,1516413340.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:40.970Z,1516413340.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:41.297Z,1516413341.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:41.329Z,1516413341.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:41.695Z,1516413341.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:41.736Z,1516413341.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:42.099Z,1516413342.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:42.140Z,1516413342.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:42.491Z,1516413342.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:42.516Z,1516413342.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:42.899Z,1516413342.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:42.914Z,1516413342.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:43.280Z,1516413343.280 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T01:55:43.282Z,1516413343.282 [NAL9602] Data Fault, FailCount= 1
2018-01-20T01:55:43.282Z,1516413343.282 [NAL9602](ERROR): Data Fault
2018-01-20T01:55:43.299Z,1516413343.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:43.367Z,1516413343.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:43.387Z,1516413343.387 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T01:55:43.670Z,1516413343.670 [NAL9602](INFO): Powering down
2018-01-20T01:55:43.704Z,1516413343.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:43.744Z,1516413343.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:44.099Z,1516413344.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:44.118Z,1516413344.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:44.502Z,1516413344.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:44.523Z,1516413344.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:44.536Z,1516413344.536 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T01:55:44.536Z,1516413344.536 [NAL9602] No Fault, FailCount= 1
2018-01-20T01:55:44.909Z,1516413344.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:44.940Z,1516413344.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:45.281Z,1516413345.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:45.308Z,1516413345.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:45.710Z,1516413345.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:45.762Z,1516413345.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:46.088Z,1516413346.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:46.118Z,1516413346.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:46.486Z,1516413346.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:46.511Z,1516413346.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:46.887Z,1516413346.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:46.924Z,1516413346.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:47.322Z,1516413347.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:47.337Z,1516413347.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:47.687Z,1516413347.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:47.739Z,1516413347.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:48.105Z,1516413348.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:48.129Z,1516413348.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:48.495Z,1516413348.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:48.538Z,1516413348.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:48.892Z,1516413348.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:48.934Z,1516413348.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:49.320Z,1516413349.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:49.346Z,1516413349.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:49.700Z,1516413349.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:49.755Z,1516413349.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:50.099Z,1516413350.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:50.114Z,1516413350.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:50.492Z,1516413350.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:50.512Z,1516413350.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:50.512Z,1516413350.512 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2018-01-20T01:55:50.512Z,1516413350.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-20T01:55:50.514Z,1516413350.514 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:50.514Z,1516413350.514 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2018-01-20T01:55:50.514Z,1516413350.514 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-20T01:55:50.518Z,1516413350.518 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:50.518Z,1516413350.518 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 95
2018-01-20T01:55:50.518Z,1516413350.518 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:55:50.545Z,1516413350.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-20T01:55:50.545Z,1516413350.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-20T01:55:50.545Z,1516413350.545 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:55:50.896Z,1516413350.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:50.926Z,1516413350.926 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-20T01:55:50.926Z,1516413350.926 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2018-01-20T01:55:50.926Z,1516413350.926 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-20T01:55:50.926Z,1516413350.926 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2018-01-20T01:55:50.961Z,1516413350.961 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:55:50.961Z,1516413350.961 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 95
2018-01-20T01:55:51.287Z,1516413351.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:51.312Z,1516413351.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-20T01:55:51.313Z,1516413351.313 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:55:51.313Z,1516413351.313 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:55:51.314Z,1516413351.314 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-20T01:55:51.314Z,1516413351.314 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:55:51.314Z,1516413351.314 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:55:51.315Z,1516413351.315 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:55:51.316Z,1516413351.316 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:55:51.316Z,1516413351.316 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:55:51.687Z,1516413351.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:51.723Z,1516413351.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-20T01:55:51.724Z,1516413351.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:52.091Z,1516413352.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:52.116Z,1516413352.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-20T01:55:52.117Z,1516413352.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:52.480Z,1516413352.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:52.494Z,1516413352.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-20T01:55:52.495Z,1516413352.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:52.891Z,1516413352.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:52.921Z,1516413352.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-20T01:55:52.922Z,1516413352.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:53.267Z,1516413353.267 [CommandLine](IMPORTANT): got command maintain sensor NAL9602.latitude_fix 36.799999 degree
2018-01-20T01:55:53.268Z,1516413353.268 [ComponentRegistry](DEBUG): SyncComponent "Maintain_NAL9602.latitude_fix" handled in the control thread.
2018-01-20T01:55:53.269Z,1516413353.269 [CommandLine](IMPORTANT): got command maintain sensor NAL9602.longitude_fix -121.800003 degree
2018-01-20T01:55:53.270Z,1516413353.270 [ComponentRegistry](DEBUG): SyncComponent "Maintain_NAL9602.longitude_fix" handled in the control thread.
2018-01-20T01:55:53.291Z,1516413353.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:53.357Z,1516413353.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-20T01:55:53.364Z,1516413353.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-20T01:55:53.402Z,1516413353.402 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,Depth_Keller,NAL9602,Onboard,DAT,PNI_TCM,PAR_Licor,Depth_Keller,Maintain_NAL9602.latitude_fix,Maintain_NAL9602.longitude_fix,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-01-20T01:55:53.687Z,1516413353.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:53.705Z,1516413353.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-20T01:55:53.706Z,1516413353.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:54.099Z,1516413354.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:54.116Z,1516413354.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-20T01:55:54.138Z,1516413354.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:54.496Z,1516413354.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:54.510Z,1516413354.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-20T01:55:54.511Z,1516413354.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:54.896Z,1516413354.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:54.910Z,1516413354.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-20T01:55:54.912Z,1516413354.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:55.294Z,1516413355.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:55.309Z,1516413355.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-20T01:55:55.310Z,1516413355.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:55.691Z,1516413355.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:55.705Z,1516413355.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-20T01:55:55.706Z,1516413355.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:56.098Z,1516413356.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:56.112Z,1516413356.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-20T01:55:56.113Z,1516413356.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:56.495Z,1516413356.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:56.515Z,1516413356.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-20T01:55:56.516Z,1516413356.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:56.923Z,1516413356.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:56.970Z,1516413356.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-01-20T01:55:56.971Z,1516413356.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:57.295Z,1516413357.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:57.330Z,1516413357.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-20T01:55:57.331Z,1516413357.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:57.695Z,1516413357.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:57.713Z,1516413357.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-20T01:55:57.714Z,1516413357.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:58.095Z,1516413358.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:58.110Z,1516413358.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-20T01:55:58.111Z,1516413358.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:58.516Z,1516413358.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:58.561Z,1516413358.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-20T01:55:58.562Z,1516413358.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:58.894Z,1516413358.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:58.927Z,1516413358.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-20T01:55:58.928Z,1516413358.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:59.287Z,1516413359.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:59.321Z,1516413359.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-20T01:55:59.322Z,1516413359.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:55:59.687Z,1516413359.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:55:59.722Z,1516413359.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-20T01:55:59.723Z,1516413359.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:00.087Z,1516413360.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:00.112Z,1516413360.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-20T01:56:00.113Z,1516413360.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:00.483Z,1516413360.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:00.515Z,1516413360.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-20T01:56:00.516Z,1516413360.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:00.891Z,1516413360.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:00.916Z,1516413360.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-20T01:56:00.917Z,1516413360.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:01.287Z,1516413361.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:01.312Z,1516413361.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-20T01:56:01.313Z,1516413361.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:01.683Z,1516413361.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:01.719Z,1516413361.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-20T01:56:01.720Z,1516413361.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:02.091Z,1516413362.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:02.116Z,1516413362.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-20T01:56:02.118Z,1516413362.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:02.487Z,1516413362.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:02.512Z,1516413362.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-20T01:56:02.513Z,1516413362.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:02.883Z,1516413362.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:02.918Z,1516413362.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-20T01:56:02.919Z,1516413362.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:03.280Z,1516413363.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:03.303Z,1516413363.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-20T01:56:03.304Z,1516413363.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:03.687Z,1516413363.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:03.718Z,1516413363.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-20T01:56:03.719Z,1516413363.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:04.083Z,1516413364.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:04.119Z,1516413364.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-20T01:56:04.120Z,1516413364.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:04.484Z,1516413364.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:04.511Z,1516413364.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-20T01:56:04.512Z,1516413364.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:04.894Z,1516413364.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:04.920Z,1516413364.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-20T01:56:04.921Z,1516413364.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:05.288Z,1516413365.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:05.323Z,1516413365.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-20T01:56:05.324Z,1516413365.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:05.694Z,1516413365.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:05.709Z,1516413365.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-20T01:56:05.710Z,1516413365.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:06.091Z,1516413366.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:06.111Z,1516413366.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-20T01:56:06.112Z,1516413366.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:06.498Z,1516413366.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:06.512Z,1516413366.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-20T01:56:06.513Z,1516413366.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:06.898Z,1516413366.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:06.913Z,1516413366.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-20T01:56:06.914Z,1516413366.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:07.294Z,1516413367.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:07.316Z,1516413367.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-20T01:56:07.322Z,1516413367.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:07.699Z,1516413367.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:07.713Z,1516413367.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-20T01:56:07.714Z,1516413367.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:08.099Z,1516413368.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:08.114Z,1516413368.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-20T01:56:08.115Z,1516413368.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:08.482Z,1516413368.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:08.517Z,1516413368.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-20T01:56:08.518Z,1516413368.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:08.883Z,1516413368.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:08.909Z,1516413368.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-20T01:56:08.910Z,1516413368.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:09.280Z,1516413369.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:09.311Z,1516413369.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-20T01:56:09.312Z,1516413369.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:09.683Z,1516413369.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:09.707Z,1516413369.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-20T01:56:09.708Z,1516413369.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:10.083Z,1516413370.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:10.108Z,1516413370.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-20T01:56:10.109Z,1516413370.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:10.498Z,1516413370.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:10.514Z,1516413370.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:10.887Z,1516413370.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:10.921Z,1516413370.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:11.283Z,1516413371.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:11.319Z,1516413371.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:11.683Z,1516413371.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:11.712Z,1516413371.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:12.087Z,1516413372.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:12.120Z,1516413372.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:12.207Z,1516413372.207 [CommandLine](IMPORTANT): got command set NAL9602.time_fix 1516413184.000000 second
2018-01-20T01:56:12.483Z,1516413372.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:12.509Z,1516413372.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:12.883Z,1516413372.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:12.909Z,1516413372.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:13.283Z,1516413373.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:13.316Z,1516413373.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:13.674Z,1516413373.674 [NAL9602](INFO): Powering up NAL9602
2018-01-20T01:56:13.692Z,1516413373.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:13.725Z,1516413373.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:14.093Z,1516413374.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:14.119Z,1516413374.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:14.487Z,1516413374.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:14.519Z,1516413374.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:14.895Z,1516413374.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:14.945Z,1516413374.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:15.291Z,1516413375.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:15.317Z,1516413375.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:15.686Z,1516413375.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:15.730Z,1516413375.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:16.091Z,1516413376.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:16.132Z,1516413376.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:16.503Z,1516413376.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:16.534Z,1516413376.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:16.814Z,1516413376.814 [CommandLine](IMPORTANT): got command get latitude
2018-01-20T01:56:16.814Z,1516413376.814 [CommandLine](FAULT): Element has no value
2018-01-20T01:56:16.908Z,1516413376.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:16.936Z,1516413376.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:17.291Z,1516413377.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:17.305Z,1516413377.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:17.691Z,1516413377.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:17.706Z,1516413377.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:18.090Z,1516413378.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:18.105Z,1516413378.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:18.491Z,1516413378.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:18.505Z,1516413378.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:18.890Z,1516413378.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:18.906Z,1516413378.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:19.296Z,1516413379.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:19.311Z,1516413379.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:19.696Z,1516413379.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:19.711Z,1516413379.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:20.096Z,1516413380.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:20.111Z,1516413380.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:20.496Z,1516413380.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:20.510Z,1516413380.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:20.891Z,1516413380.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:20.911Z,1516413380.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:21.292Z,1516413381.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:21.308Z,1516413381.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:21.704Z,1516413381.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:21.720Z,1516413381.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:22.092Z,1516413382.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:22.107Z,1516413382.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:22.499Z,1516413382.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:22.515Z,1516413382.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:22.896Z,1516413382.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:22.911Z,1516413382.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:23.288Z,1516413383.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:23.320Z,1516413383.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:23.688Z,1516413383.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:23.715Z,1516413383.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:24.088Z,1516413384.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:24.114Z,1516413384.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:24.511Z,1516413384.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:24.532Z,1516413384.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:24.870Z,1516413384.870 [NAL9602](INFO): NAL9602 initialized
2018-01-20T01:56:24.887Z,1516413384.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:24.932Z,1516413384.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:25.298Z,1516413385.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:25.369Z,1516413385.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:25.720Z,1516413385.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:25.735Z,1516413385.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:26.106Z,1516413386.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:26.128Z,1516413386.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:26.499Z,1516413386.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:26.532Z,1516413386.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:26.892Z,1516413386.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:26.927Z,1516413386.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:27.288Z,1516413387.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:27.319Z,1516413387.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:27.697Z,1516413387.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:27.733Z,1516413387.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:28.117Z,1516413388.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:28.137Z,1516413388.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:28.502Z,1516413388.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:28.528Z,1516413388.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:28.898Z,1516413388.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:28.932Z,1516413388.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:29.293Z,1516413389.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:29.332Z,1516413389.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:29.695Z,1516413389.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:29.710Z,1516413389.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:30.106Z,1516413390.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:30.141Z,1516413390.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:30.510Z,1516413390.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:30.536Z,1516413390.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:30.906Z,1516413390.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:30.930Z,1516413390.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:31.295Z,1516413391.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:31.312Z,1516413391.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:31.703Z,1516413391.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:31.724Z,1516413391.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:32.102Z,1516413392.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:32.118Z,1516413392.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:32.501Z,1516413392.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:32.516Z,1516413392.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:35.599Z,1516413395.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:35.614Z,1516413395.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:35.716Z,1516413395.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:35.759Z,1516413395.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:36.096Z,1516413396.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:36.111Z,1516413396.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:36.503Z,1516413396.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:36.524Z,1516413396.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:36.895Z,1516413396.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:36.910Z,1516413396.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:37.306Z,1516413397.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:37.321Z,1516413397.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:37.709Z,1516413397.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:37.732Z,1516413397.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:38.101Z,1516413398.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:38.206Z,1516413398.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:38.495Z,1516413398.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:38.510Z,1516413398.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:38.895Z,1516413398.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:38.910Z,1516413398.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:39.295Z,1516413399.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:39.310Z,1516413399.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:39.695Z,1516413399.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:39.710Z,1516413399.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:40.103Z,1516413400.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:40.122Z,1516413400.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:40.505Z,1516413400.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:40.520Z,1516413400.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:56:40.743Z,1516413400.743 [CommandLine](IMPORTANT): got command set NAL9602.time_fix 1516413184.000000 second
2018-01-20T01:56:40.907Z,1516413400.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:40.946Z,1516413400.946 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T01:56:40.946Z,1516413400.946 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T01:56:41.318Z,1516413401.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:41.766Z,1516413401.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:42.088Z,1516413402.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:44.490Z,1516413404.490 [CommandLine](IMPORTANT): got command get latitude
2018-01-20T01:56:44.490Z,1516413404.490 [CommandLine](IMPORTANT): latitude 36.799999 arcdeg
2018-01-20T01:56:45.659Z,1516413405.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:45.777Z,1516413405.777 [DataOverHttps](INFO): Sending 145 bytes from file Logs/20180119T210901/Courier0120.lzma
2018-01-20T01:56:45.812Z,1516413405.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:46.197Z,1516413406.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:46.547Z,1516413406.547 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0120.lzma.bak
2018-01-20T01:56:46.547Z,1516413406.547 [DataOverHttps](INFO): SBD MOMSN=7725744
2018-01-20T01:56:46.571Z,1516413406.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:47.131Z,1516413407.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:47.374Z,1516413407.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:51.234Z,1516413411.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:51.392Z,1516413411.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:51.731Z,1516413411.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:52.136Z,1516413412.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:52.538Z,1516413412.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:52.938Z,1516413412.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:56.303Z,1516413416.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:56.406Z,1516413416.406 [DataOverHttps](INFO): Sending 421 bytes from file Logs/20180119T210901/Express0121.lzma
2018-01-20T01:56:56.443Z,1516413416.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:56.803Z,1516413416.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:57.171Z,1516413417.171 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0121.lzma.bak
2018-01-20T01:56:57.171Z,1516413417.171 [DataOverHttps](INFO): SBD MOMSN=7725750
2018-01-20T01:56:57.212Z,1516413417.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:57.694Z,1516413417.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:56:57.721Z,1516413417.721 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T01:56:57.721Z,1516413417.721 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T01:56:57.721Z,1516413417.721 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T01:56:57.998Z,1516413417.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:01.295Z,1516413421.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:01.421Z,1516413421.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:01.769Z,1516413421.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:02.143Z,1516413422.143 [DataOverHttps](IMPORTANT): SBD MTMSN=20180120T015405
2018-01-20T01:57:02.183Z,1516413422.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:02.561Z,1516413422.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:02.974Z,1516413422.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:06.230Z,1516413426.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:06.329Z,1516413426.329 [DataOverHttps](INFO): Received command:load Insert/AbortDrift.xml;set AbortDrift.AcousticTimeout 10 minute;run 
2018-01-20T01:57:06.339Z,1516413426.339 [CommandLine](IMPORTANT): got command load ./Missions/Insert/AbortDrift.xml
2018-01-20T01:57:06.340Z,1516413426.340 [MissionManager](INFO): Loading Mission: ./Missions/Insert/AbortDrift.xml
2018-01-20T01:57:06.399Z,1516413426.399 [MissionManager](INFO): DefineArg AbortDrift.AcousticTimeout = 96.000000 h
2018-01-20T01:57:06.401Z,1516413426.401 [MissionManager](INFO): DefineArg AbortDrift.FromLastAcousticReceiveToNow = nan h
2018-01-20T01:57:06.403Z,1516413426.403 [MissionManager](INFO): DefineArg AbortDrift.FromLastTimeFixToNow = nan h
2018-01-20T01:57:06.405Z,1516413426.405 [MissionManager](INFO): DefineArg AbortDrift.SyslogStop = 0 bool
2018-01-20T01:57:06.439Z,1516413426.439 [AbortDrift:D.Execute](DEBUG): Construct Execute.
2018-01-20T01:57:06.444Z,1516413426.444 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Aggregate xmlns="Tethys"
       xmlns:Guidance="Tethys/Guidance"
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="AbortDrift">

    <DefineArg Name="AcousticTimeout"><Description>
        Drifting for longer than this period without receiving any acoustic
        signals will trigger the abort.
    </Description><Units:hour/><Value>96</Value></DefineArg>

    <DefineArg Name="FromLastAcousticReceiveToNow"><Description>
        Elapsed time from last acoustic reception to now.
    </Description><Units:hour/><Value>NaN</Value></DefineArg>

    <DefineArg Name="FromLastTimeFixToNow"><Description>
        Elapsed time from last time_fix to now.
    </Description><Units:hour/><Value>NaN</Value></DefineArg>

    <DefineArg Name="SyslogStop"><Description>
        Flag of Syslog of stop.
    </Description><False/></DefineArg>

    <When>
        <Not><IsNaN>
            <Universal:acoustic_receive_time/>
        </IsNaN></Not>
        <And><Elapsed><Universal:acoustic_receive_time/></Elapsed><Gt><Arg Name="AcousticTimeout"/></Gt></And>
        <And><Elapsed><Universal:time_fix/></Elapsed><Gt><Arg Name="AcousticTimeout"/></Gt></And>
        <And><Not><Arg Name="SyslogStop"/></Not></And>
        <Or><IsNaN>
            <Universal:acoustic_receive_time/>
        </IsNaN><And><Elapsed><Universal:time_fix/></Elapsed><Gt><Arg Name="AcousticTimeout"/></Gt></And><And><Not><Arg Name="SyslogStop"/></Not></And></Or>
    </When>

    <Assign><Sequence/><Arg Name="FromLastTimeFixToNow"/><Elapsed><Universal:time_fix/></Elapsed></Assign>

    <Aggregate Id="TimeoutExpiredAcousticReceive">

        <Sequence/>

        <When>
            <Not><IsNaN>
                <Universal:acoustic_receive_time/>
            </IsNaN></Not>
        </When>

        <Assign><Sequence/><Arg Name="FromLastAcousticReceiveToNow"/><Elapsed><Universal:acoustic_receive_time/></Elapsed></Assign>

        <Syslog Severity="Important">Acoustic timeout <Arg Name="AcousticTimeout"/><Units:hour/> exceeded. Elapsed time since last acoustic reception = <Arg Name="FromLastAcousticReceiveToNow"/><Units:hour/>, Elapsed time since last time_fix = <Arg Name="FromLastTimeFixToNow"/><Units:hour/>. Aborting drift by executing stop command.</Syslog>

    </Aggregate>

    <Aggregate Id="TimeoutExpiredNoAcousticReceive">

        <Sequence/>

        <When>
            <IsNaN>
                <Universal:acoustic_receive_time/>
            </IsNaN>
        </When>

        <Syslog Severity="Important">Acoustic timeout <Arg Name="AcousticTimeout"/><Units:hour/> exceeded. No acoustic reception ever. Elapsed time since last time_fix = <Arg Name="FromLastTimeFixToNow"/><Units:hour/>. Aborting drift by executing stop command.</Syslog>

    </Aggregate>

    <Guidance:Execute>
        <Setting><Guidance:Execute.command/><String>stop</String></Setting>
    </Guidance:Execute>

    <Assign><Sequence/><Arg Name="SyslogStop"/><True/></Assign>

</Aggregate>


2018-01-20T01:57:06.445Z,1516413426.445 [CommandLine](IMPORTANT): Loaded ./Missions/Insert/AbortDrift.xml
2018-01-20T01:57:07.747Z,1516413427.747 [CommandLine](IMPORTANT): got command set AbortDrift.AcousticTimeout 10.000000 minute
2018-01-20T01:57:07.748Z,1516413427.748 [CommandLine](IMPORTANT): got command run 
2018-01-20T01:57:07.750Z,1516413427.750 [CommandLine](IMPORTANT): Running 
2018-01-20T01:57:07.800Z,1516413427.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:07.840Z,1516413427.840 [Default] Stopped
2018-01-20T01:57:07.840Z,1516413427.840 [Default](DEBUG): Aggregate::uninitialize Default
2018-01-20T01:57:07.840Z,1516413427.840 [Default:B.GoToSurface] Stopped
2018-01-20T01:57:07.840Z,1516413427.840 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-01-20T01:57:07.840Z,1516413427.840 [Default:CheckIn] Stopped
2018-01-20T01:57:07.840Z,1516413427.840 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T01:57:07.840Z,1516413427.840 [Default:CheckIn:C.Wait] Stopped
2018-01-20T01:57:07.840Z,1516413427.840 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T01:57:07.840Z,1516413427.840 [MissionManager](IMPORTANT): Started mission AbortDrift
2018-01-20T01:57:07.840Z,1516413427.840 [AbortDrift] Running Loop=1
2018-01-20T01:57:07.845Z,1516413427.845 [AbortDrift](DEBUG): Aggregate::initialize AbortDrift
2018-01-20T01:57:07.845Z,1516413427.845 [AbortDrift:D.Execute] Running Loop=1
2018-01-20T01:57:07.845Z,1516413427.845 [AbortDrift:A] Running Loop=1
2018-01-20T01:57:07.845Z,1516413427.845 [AbortDrift:D.Execute] Running Loop=1
2018-01-20T01:57:07.846Z,1516413427.846 [AbortDrift:D.Execute](INFO): Executing command stop
2018-01-20T01:57:07.847Z,1516413427.847 [AbortDrift:TimeoutExpiredAcousticReceive] Running Loop=1
2018-01-20T01:57:07.847Z,1516413427.847 [AbortDrift:TimeoutExpiredAcousticReceive](DEBUG): Aggregate::initialize AbortDrift:TimeoutExpiredAcousticReceive
2018-01-20T01:57:07.847Z,1516413427.847 [AbortDrift:TimeoutExpiredAcousticReceive:A] Running Loop=1
2018-01-20T01:57:07.848Z,1516413427.848 [AbortDrift:TimeoutExpiredAcousticReceive:A] Stopped
2018-01-20T01:57:07.848Z,1516413427.848 [AbortDrift:TimeoutExpiredAcousticReceive:B] Running Loop=1
2018-01-20T01:57:07.853Z,1516413427.853 [CommandLine](IMPORTANT): got command stop
2018-01-20T01:57:07.853Z,1516413427.853 [CommandLine](IMPORTANT): Scheduling is paused
2018-01-20T01:57:07.853Z,1516413427.853 [Supervisor](INFO): Stop Mission called by CommandLine::commandStop
2018-01-20T01:57:07.857Z,1516413427.857 [AbortDrift:A] Stopped
2018-01-20T01:57:07.857Z,1516413427.857 [AbortDrift:E] Running Loop=1
2018-01-20T01:57:07.858Z,1516413427.858 [MissionManager](INFO): MissionManager is completed.
2018-01-20T01:57:07.858Z,1516413427.858 [MissionManager](INFO): Uninitializing Mission AbortDrift
2018-01-20T01:57:07.858Z,1516413427.858 [AbortDrift] Stopped
2018-01-20T01:57:07.858Z,1516413427.858 [AbortDrift](DEBUG): Aggregate::uninitialize AbortDrift
2018-01-20T01:57:07.858Z,1516413427.858 [AbortDrift:TimeoutExpiredAcousticReceive] Stopped
2018-01-20T01:57:07.858Z,1516413427.858 [AbortDrift:TimeoutExpiredAcousticReceive](DEBUG): Aggregate::uninitialize AbortDrift:TimeoutExpiredAcousticReceive
2018-01-20T01:57:07.858Z,1516413427.858 [AbortDrift:TimeoutExpiredAcousticReceive:B] Stopped
2018-01-20T01:57:07.858Z,1516413427.858 [AbortDrift:D.Execute] Stopped
2018-01-20T01:57:07.858Z,1516413427.858 [AbortDrift:E] Stopped
2018-01-20T01:57:07.919Z,1516413427.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:07.956Z,1516413427.956 [MissionManager](IMPORTANT): Started mission Default
2018-01-20T01:57:07.956Z,1516413427.956 [Default] Running Loop=1
2018-01-20T01:57:07.956Z,1516413427.956 [Default](DEBUG): Aggregate::initialize Default
2018-01-20T01:57:07.965Z,1516413427.965 [Default:B.GoToSurface] Running Loop=1
2018-01-20T01:57:07.965Z,1516413427.965 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-01-20T01:57:07.965Z,1516413427.965 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-01-20T01:57:07.965Z,1516413427.965 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-01-20T01:57:07.966Z,1516413427.966 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-01-20T01:57:07.966Z,1516413427.966 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2018-01-20T01:57:07.966Z,1516413427.966 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-01-20T01:57:07.967Z,1516413427.967 [Default:A.Wait] Running Loop=1
2018-01-20T01:57:07.967Z,1516413427.967 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-01-20T01:57:08.334Z,1516413428.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:08.721Z,1516413428.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:09.118Z,1516413429.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:09.518Z,1516413429.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:09.918Z,1516413429.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:10.322Z,1516413430.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:10.718Z,1516413430.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:11.118Z,1516413431.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:11.522Z,1516413431.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:11.918Z,1516413431.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:12.318Z,1516413432.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:12.722Z,1516413432.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:13.122Z,1516413433.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:13.518Z,1516413433.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:13.918Z,1516413433.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:14.318Z,1516413434.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:14.718Z,1516413434.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:15.121Z,1516413435.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:15.518Z,1516413435.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:15.894Z,1516413435.894 [NAL9602](INFO): Powering down
2018-01-20T01:57:15.923Z,1516413435.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:16.318Z,1516413436.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:16.726Z,1516413436.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:17.118Z,1516413437.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:17.532Z,1516413437.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:17.927Z,1516413437.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:18.323Z,1516413438.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:18.710Z,1516413438.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:19.111Z,1516413439.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:19.512Z,1516413439.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:19.931Z,1516413439.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:20.326Z,1516413440.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:20.712Z,1516413440.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:21.116Z,1516413441.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:21.147Z,1516413441.147 [Default:A.Wait](INFO): Done Waiting.
2018-01-20T01:57:21.147Z,1516413441.147 [Default:A.Wait] Stopped
2018-01-20T01:57:21.147Z,1516413441.147 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T01:57:21.765Z,1516413441.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:21.807Z,1516413441.807 [Default:CheckIn] Running Loop=1
2018-01-20T01:57:21.807Z,1516413441.807 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T01:57:21.808Z,1516413441.808 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T01:57:22.178Z,1516413442.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:22.610Z,1516413442.610 [NAL9602](INFO): Powering up
2018-01-20T01:57:22.638Z,1516413442.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:22.994Z,1516413442.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:23.371Z,1516413443.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:23.795Z,1516413443.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:24.171Z,1516413444.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:24.571Z,1516413444.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:24.975Z,1516413444.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:25.375Z,1516413445.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:25.779Z,1516413445.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:26.187Z,1516413446.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:26.578Z,1516413446.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:26.978Z,1516413446.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:27.380Z,1516413447.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:27.778Z,1516413447.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:28.184Z,1516413448.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:28.581Z,1516413448.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:28.986Z,1516413448.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:29.380Z,1516413449.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:29.792Z,1516413449.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:30.179Z,1516413450.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:30.580Z,1516413450.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:30.978Z,1516413450.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:31.387Z,1516413451.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:31.772Z,1516413451.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:32.184Z,1516413452.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:32.570Z,1516413452.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:32.972Z,1516413452.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:33.398Z,1516413453.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:33.754Z,1516413453.754 [NAL9602](INFO): NAL9602 initialized
2018-01-20T01:57:33.770Z,1516413453.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:34.190Z,1516413454.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:34.594Z,1516413454.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:34.994Z,1516413454.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:35.391Z,1516413455.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:35.775Z,1516413455.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:36.171Z,1516413456.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:36.573Z,1516413456.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:36.999Z,1516413456.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:37.395Z,1516413457.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:37.795Z,1516413457.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:38.195Z,1516413458.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:38.575Z,1516413458.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:38.979Z,1516413458.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:39.375Z,1516413459.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:39.779Z,1516413459.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:40.171Z,1516413460.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:40.575Z,1516413460.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:40.979Z,1516413460.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:41.369Z,1516413461.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:41.782Z,1516413461.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:42.190Z,1516413462.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:42.586Z,1516413462.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:42.989Z,1516413462.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:43.379Z,1516413463.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:43.780Z,1516413463.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:44.177Z,1516413464.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:44.587Z,1516413464.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:44.987Z,1516413464.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:45.374Z,1516413465.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:45.787Z,1516413465.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:46.188Z,1516413466.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:46.582Z,1516413466.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:46.993Z,1516413466.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:47.389Z,1516413467.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:47.798Z,1516413467.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:48.190Z,1516413468.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:48.571Z,1516413468.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:48.987Z,1516413468.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:49.375Z,1516413469.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:49.775Z,1516413469.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:50.171Z,1516413470.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:50.583Z,1516413470.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:50.983Z,1516413470.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:51.386Z,1516413471.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:51.780Z,1516413471.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:52.186Z,1516413472.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:52.586Z,1516413472.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:52.994Z,1516413472.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:53.383Z,1516413473.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:53.782Z,1516413473.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:54.182Z,1516413474.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:54.579Z,1516413474.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:54.981Z,1516413474.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:55.381Z,1516413475.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:55.775Z,1516413475.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:56.183Z,1516413476.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:56.583Z,1516413476.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:56.980Z,1516413476.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:57.390Z,1516413477.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:57.793Z,1516413477.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:58.231Z,1516413478.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:58.590Z,1516413478.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:58.975Z,1516413478.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:59.368Z,1516413479.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:57:59.771Z,1516413479.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:00.175Z,1516413480.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:00.572Z,1516413480.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:00.980Z,1516413480.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:01.387Z,1516413481.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:01.783Z,1516413481.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:02.175Z,1516413482.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:02.586Z,1516413482.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:02.986Z,1516413482.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:06.258Z,1516413486.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:06.391Z,1516413486.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:06.748Z,1516413486.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:07.141Z,1516413487.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:07.556Z,1516413487.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:07.954Z,1516413487.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:08.348Z,1516413488.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:08.753Z,1516413488.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:09.131Z,1516413489.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:09.529Z,1516413489.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:09.932Z,1516413489.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:10.333Z,1516413490.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:10.729Z,1516413490.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:11.131Z,1516413491.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:11.531Z,1516413491.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:11.938Z,1516413491.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:12.342Z,1516413492.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:12.742Z,1516413492.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:12.761Z,1516413492.761 [PNI_TCM](ERROR): CRC does not match. Expected:0x52529 got:0x49414
2018-01-20T01:58:13.131Z,1516413493.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:13.537Z,1516413493.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:13.543Z,1516413493.543 [PNI_TCM](ERROR): CRC does not match. Expected:0x37322 got:0x6593
2018-01-20T01:58:13.942Z,1516413493.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:14.325Z,1516413494.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:14.739Z,1516413494.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:15.155Z,1516413495.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:15.531Z,1516413495.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:15.939Z,1516413495.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:16.366Z,1516413496.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:16.744Z,1516413496.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:17.131Z,1516413497.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:17.535Z,1516413497.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:17.929Z,1516413497.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:18.342Z,1516413498.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:18.739Z,1516413498.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:19.139Z,1516413499.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:19.542Z,1516413499.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:19.942Z,1516413499.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:20.340Z,1516413500.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:20.744Z,1516413500.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:21.144Z,1516413501.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:21.540Z,1516413501.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:21.947Z,1516413501.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:22.347Z,1516413502.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:22.738Z,1516413502.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:23.152Z,1516413503.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:23.548Z,1516413503.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:23.931Z,1516413503.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:24.360Z,1516413504.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:24.756Z,1516413504.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:25.144Z,1516413505.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:25.544Z,1516413505.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:25.975Z,1516413505.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:26.334Z,1516413506.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:26.740Z,1516413506.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:27.141Z,1516413507.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:27.570Z,1516413507.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:27.933Z,1516413507.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:28.337Z,1516413508.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:28.733Z,1516413508.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:29.132Z,1516413509.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:29.554Z,1516413509.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:29.945Z,1516413509.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:30.342Z,1516413510.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:30.747Z,1516413510.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:31.133Z,1516413511.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:31.533Z,1516413511.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:31.959Z,1516413511.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:32.333Z,1516413512.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:32.739Z,1516413512.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:33.154Z,1516413513.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:33.547Z,1516413513.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:33.952Z,1516413513.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:34.371Z,1516413514.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:34.744Z,1516413514.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:35.166Z,1516413515.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:35.541Z,1516413515.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:35.934Z,1516413515.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:36.335Z,1516413516.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:36.739Z,1516413516.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:37.129Z,1516413517.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:37.534Z,1516413517.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:37.935Z,1516413517.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:38.349Z,1516413518.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:38.748Z,1516413518.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:39.150Z,1516413519.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:39.542Z,1516413519.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:39.931Z,1516413519.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:40.331Z,1516413520.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:40.731Z,1516413520.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:41.128Z,1516413521.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:41.533Z,1516413521.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:41.928Z,1516413521.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:42.327Z,1516413522.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:42.735Z,1516413522.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:43.127Z,1516413523.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:43.542Z,1516413523.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:43.950Z,1516413523.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:44.350Z,1516413524.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:44.746Z,1516413524.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:45.138Z,1516413525.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:45.532Z,1516413525.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:45.936Z,1516413525.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:46.336Z,1516413526.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:46.735Z,1516413526.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:47.144Z,1516413527.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:47.539Z,1516413527.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:47.930Z,1516413527.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:48.327Z,1516413528.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:48.751Z,1516413528.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:49.142Z,1516413529.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:49.546Z,1516413529.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:49.951Z,1516413529.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:50.327Z,1516413530.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:50.727Z,1516413530.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:51.152Z,1516413531.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:51.527Z,1516413531.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:51.568Z,1516413531.568 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T01:58:51.568Z,1516413531.568 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-01-20T01:58:51.568Z,1516413531.568 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T01:58:51.582Z,1516413531.582 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T01:58:51.931Z,1516413531.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:51.978Z,1516413531.978 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T01:58:51.978Z,1516413531.978 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-01-20T01:58:52.351Z,1516413532.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:52.370Z,1516413532.370 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T01:58:52.370Z,1516413532.370 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T01:58:52.371Z,1516413532.371 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T01:58:52.726Z,1516413532.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:53.127Z,1516413533.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:53.531Z,1516413533.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:53.942Z,1516413533.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:54.342Z,1516413534.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:54.750Z,1516413534.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:55.150Z,1516413535.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:55.536Z,1516413535.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:55.943Z,1516413535.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:56.336Z,1516413536.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:56.734Z,1516413536.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:57.134Z,1516413537.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:57.530Z,1516413537.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:57.935Z,1516413537.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:58.335Z,1516413538.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:58.743Z,1516413538.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:59.146Z,1516413539.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:59.550Z,1516413539.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:58:59.941Z,1516413539.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:00.347Z,1516413540.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:00.731Z,1516413540.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:01.126Z,1516413541.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:01.527Z,1516413541.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:01.935Z,1516413541.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:02.327Z,1516413542.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:02.738Z,1516413542.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:03.139Z,1516413543.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:06.417Z,1516413546.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:06.551Z,1516413546.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:06.914Z,1516413546.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:07.317Z,1516413547.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:07.684Z,1516413547.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:08.090Z,1516413548.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:08.490Z,1516413548.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:08.884Z,1516413548.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:09.290Z,1516413549.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:09.690Z,1516413549.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:10.089Z,1516413550.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:10.489Z,1516413550.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:10.887Z,1516413550.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:11.304Z,1516413551.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:11.708Z,1516413551.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:12.092Z,1516413552.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:12.490Z,1516413552.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:12.883Z,1516413552.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:13.283Z,1516413553.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:13.680Z,1516413553.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:14.094Z,1516413554.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:14.479Z,1516413554.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:14.880Z,1516413554.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:15.307Z,1516413555.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:15.712Z,1516413555.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:16.087Z,1516413556.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:16.491Z,1516413556.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:16.883Z,1516413556.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:17.280Z,1516413557.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:17.683Z,1516413557.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:18.083Z,1516413558.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:18.480Z,1516413558.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:18.890Z,1516413558.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:19.288Z,1516413559.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:19.685Z,1516413559.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:20.087Z,1516413560.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:20.157Z,1516413560.157 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T01:59:20.493Z,1516413560.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:20.885Z,1516413560.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:21.291Z,1516413561.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:21.695Z,1516413561.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:22.087Z,1516413562.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:22.489Z,1516413562.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:22.890Z,1516413562.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:23.286Z,1516413563.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:23.695Z,1516413563.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:24.112Z,1516413564.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:24.507Z,1516413564.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:24.905Z,1516413564.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:25.283Z,1516413565.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:25.683Z,1516413565.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:26.085Z,1516413566.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:26.481Z,1516413566.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:26.880Z,1516413566.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:27.283Z,1516413567.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:27.681Z,1516413567.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:28.082Z,1516413568.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:28.516Z,1516413568.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:28.894Z,1516413568.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:29.283Z,1516413569.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:29.691Z,1516413569.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:30.088Z,1516413570.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:30.481Z,1516413570.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:30.894Z,1516413570.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:31.294Z,1516413571.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:31.690Z,1516413571.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:32.096Z,1516413572.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:32.490Z,1516413572.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:32.889Z,1516413572.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:33.308Z,1516413573.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:33.683Z,1516413573.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:34.079Z,1516413574.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:34.510Z,1516413574.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:34.885Z,1516413574.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:35.281Z,1516413575.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:35.689Z,1516413575.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:36.080Z,1516413576.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:36.482Z,1516413576.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:36.913Z,1516413576.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:37.315Z,1516413577.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:37.679Z,1516413577.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:38.094Z,1516413578.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:38.492Z,1516413578.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:38.885Z,1516413578.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:39.290Z,1516413579.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:39.296Z,1516413579.296 [PNI_TCM](ERROR): CRC does not match. Expected:0x61096 got:0x34503
2018-01-20T01:59:39.693Z,1516413579.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:40.091Z,1516413580.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:40.487Z,1516413580.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:40.893Z,1516413580.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:40.905Z,1516413580.905 [PNI_TCM](ERROR): CRC does not match. Expected:0x51103 got:0x49481
2018-01-20T01:59:41.287Z,1516413581.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:41.693Z,1516413581.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:42.090Z,1516413582.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:42.477Z,1516413582.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:42.894Z,1516413582.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:43.294Z,1516413583.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:43.680Z,1516413583.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:44.088Z,1516413584.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:44.486Z,1516413584.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:44.881Z,1516413584.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:45.288Z,1516413585.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:45.718Z,1516413585.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:46.105Z,1516413586.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:46.491Z,1516413586.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:46.894Z,1516413586.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:47.283Z,1516413587.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:47.691Z,1516413587.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:48.094Z,1516413588.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:48.487Z,1516413588.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:48.892Z,1516413588.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:49.294Z,1516413589.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:49.692Z,1516413589.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:50.108Z,1516413590.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:50.511Z,1516413590.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:50.879Z,1516413590.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:51.285Z,1516413591.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:51.691Z,1516413591.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:52.079Z,1516413592.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:52.486Z,1516413592.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:52.885Z,1516413592.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:53.287Z,1516413593.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:53.693Z,1516413593.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:54.123Z,1516413594.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:54.496Z,1516413594.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:54.911Z,1516413594.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:55.306Z,1516413595.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:55.696Z,1516413595.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:56.091Z,1516413596.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:56.492Z,1516413596.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:56.886Z,1516413596.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:57.308Z,1516413597.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:57.680Z,1516413597.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:58.088Z,1516413598.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:58.484Z,1516413598.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:58.913Z,1516413598.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:59.292Z,1516413599.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T01:59:59.724Z,1516413599.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:00.090Z,1516413600.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:00.479Z,1516413600.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:00.884Z,1516413600.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:01.287Z,1516413601.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:01.684Z,1516413601.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:02.088Z,1516413602.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:02.487Z,1516413602.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:02.886Z,1516413602.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:03.290Z,1516413603.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:06.591Z,1516413606.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:06.714Z,1516413606.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:07.082Z,1516413607.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:07.482Z,1516413607.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:07.859Z,1516413607.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:08.267Z,1516413608.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:08.668Z,1516413608.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:09.063Z,1516413609.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:09.458Z,1516413609.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:09.872Z,1516413609.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:10.262Z,1516413610.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:10.675Z,1516413610.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:11.072Z,1516413611.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:11.462Z,1516413611.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:11.875Z,1516413611.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:12.262Z,1516413612.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:12.651Z,1516413612.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:13.072Z,1516413613.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:13.452Z,1516413613.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:13.856Z,1516413613.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:14.256Z,1516413614.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:14.651Z,1516413614.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:15.051Z,1516413615.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:15.455Z,1516413615.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:15.880Z,1516413615.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:16.266Z,1516413616.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:16.655Z,1516413616.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:17.051Z,1516413617.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:17.456Z,1516413617.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:17.863Z,1516413617.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:18.260Z,1516413618.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:18.660Z,1516413618.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:19.063Z,1516413619.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:19.478Z,1516413619.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:19.867Z,1516413619.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:20.262Z,1516413620.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:20.660Z,1516413620.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:21.054Z,1516413621.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:21.462Z,1516413621.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:21.860Z,1516413621.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:22.254Z,1516413622.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:22.661Z,1516413622.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:23.060Z,1516413623.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:23.454Z,1516413623.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:23.861Z,1516413623.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:24.260Z,1516413624.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:24.667Z,1516413624.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:25.062Z,1516413625.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:25.460Z,1516413625.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:25.867Z,1516413625.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:26.262Z,1516413626.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:26.660Z,1516413626.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:27.054Z,1516413627.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:27.461Z,1516413627.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:27.860Z,1516413627.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:28.267Z,1516413628.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:28.662Z,1516413628.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:29.068Z,1516413629.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:29.467Z,1516413629.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:29.858Z,1516413629.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:30.251Z,1516413630.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:30.667Z,1516413630.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:31.068Z,1516413631.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:31.452Z,1516413631.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:31.856Z,1516413631.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:32.256Z,1516413632.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:32.659Z,1516413632.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:33.060Z,1516413633.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:33.439Z,1516413633.439 [NAL9602](INFO): SBD MO Status=2, MOMSN=4662, MT Status=2, MTMSN=0
2018-01-20T02:00:33.439Z,1516413633.439 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-01-20T02:00:33.458Z,1516413633.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:33.866Z,1516413633.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:34.255Z,1516413634.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:34.663Z,1516413634.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:35.055Z,1516413635.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:35.463Z,1516413635.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:35.860Z,1516413635.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:36.263Z,1516413636.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:36.669Z,1516413636.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:37.067Z,1516413637.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:37.462Z,1516413637.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:37.871Z,1516413637.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:38.274Z,1516413638.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:38.669Z,1516413638.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:39.058Z,1516413639.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:39.458Z,1516413639.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:39.851Z,1516413639.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:40.255Z,1516413640.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:40.659Z,1516413640.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:41.072Z,1516413641.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:41.455Z,1516413641.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:41.855Z,1516413641.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:42.251Z,1516413642.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:42.659Z,1516413642.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:43.055Z,1516413643.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:43.451Z,1516413643.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:43.855Z,1516413643.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:44.255Z,1516413644.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:44.651Z,1516413644.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:45.059Z,1516413645.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:45.455Z,1516413645.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:45.851Z,1516413645.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:46.255Z,1516413646.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:46.655Z,1516413646.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:47.051Z,1516413647.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:47.459Z,1516413647.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:47.855Z,1516413647.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:48.251Z,1516413648.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:48.658Z,1516413648.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:49.055Z,1516413649.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:49.451Z,1516413649.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:49.859Z,1516413649.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:50.255Z,1516413650.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:50.651Z,1516413650.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:51.059Z,1516413651.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:51.455Z,1516413651.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:51.859Z,1516413651.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:52.253Z,1516413652.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:52.656Z,1516413652.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:53.052Z,1516413653.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:53.453Z,1516413653.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:53.856Z,1516413653.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:54.251Z,1516413654.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:54.653Z,1516413654.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:55.055Z,1516413655.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:55.451Z,1516413655.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:55.853Z,1516413655.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:56.255Z,1516413656.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:56.651Z,1516413656.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:57.043Z,1516413657.043 [NAL9602](INFO): SBD MO Status=2, MOMSN=4662, MT Status=2, MTMSN=0
2018-01-20T02:00:57.043Z,1516413657.043 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-01-20T02:00:57.061Z,1516413657.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:57.466Z,1516413657.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:57.855Z,1516413657.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:58.249Z,1516413658.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:58.655Z,1516413658.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:59.055Z,1516413659.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:59.455Z,1516413659.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:00:59.864Z,1516413659.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:00.258Z,1516413660.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:00.656Z,1516413660.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:01.063Z,1516413661.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:01.470Z,1516413661.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:01.854Z,1516413661.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:02.268Z,1516413662.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:02.668Z,1516413662.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:03.054Z,1516413663.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:03.459Z,1516413663.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:06.721Z,1516413666.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:06.836Z,1516413666.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:07.226Z,1516413667.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:07.633Z,1516413667.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:08.031Z,1516413668.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:08.423Z,1516413668.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:08.830Z,1516413668.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:09.215Z,1516413669.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:09.632Z,1516413669.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:10.015Z,1516413670.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:10.415Z,1516413670.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:10.819Z,1516413670.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:11.231Z,1516413671.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:11.612Z,1516413671.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:12.019Z,1516413672.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:12.431Z,1516413672.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:12.812Z,1516413672.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:13.219Z,1516413673.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:13.615Z,1516413673.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:14.031Z,1516413674.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:14.419Z,1516413674.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:14.815Z,1516413674.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:15.216Z,1516413675.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:15.624Z,1516413675.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:16.019Z,1516413676.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:16.420Z,1516413676.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:16.825Z,1516413676.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:17.224Z,1516413677.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:17.618Z,1516413677.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:18.003Z,1516413678.003 [NAL9602](INFO): SBD MO Status=2, MOMSN=4662, MT Status=2, MTMSN=0
2018-01-20T02:01:18.003Z,1516413678.003 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-01-20T02:01:18.031Z,1516413678.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:18.435Z,1516413678.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:18.814Z,1516413678.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:19.223Z,1516413679.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:19.615Z,1516413679.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:20.014Z,1516413680.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:20.419Z,1516413680.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:20.815Z,1516413680.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:21.214Z,1516413681.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:21.623Z,1516413681.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:22.023Z,1516413682.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:22.441Z,1516413682.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:22.834Z,1516413682.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:23.223Z,1516413683.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:23.615Z,1516413683.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:24.022Z,1516413684.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:24.415Z,1516413684.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:24.812Z,1516413684.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:25.222Z,1516413685.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:25.615Z,1516413685.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:26.042Z,1516413686.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:26.441Z,1516413686.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:26.816Z,1516413686.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:27.213Z,1516413687.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:27.618Z,1516413687.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:28.015Z,1516413688.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:28.415Z,1516413688.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:28.823Z,1516413688.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:29.216Z,1516413689.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:29.618Z,1516413689.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:30.020Z,1516413690.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:30.420Z,1516413690.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:30.816Z,1516413690.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:31.224Z,1516413691.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:31.623Z,1516413691.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:32.031Z,1516413692.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:32.427Z,1516413692.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:32.815Z,1516413692.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:33.214Z,1516413693.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:33.619Z,1516413693.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:34.015Z,1516413694.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:34.419Z,1516413694.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:34.838Z,1516413694.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:35.226Z,1516413695.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:35.614Z,1516413695.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:36.019Z,1516413696.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:36.415Z,1516413696.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:36.816Z,1516413696.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:37.219Z,1516413697.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:37.623Z,1516413697.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:38.023Z,1516413698.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:38.423Z,1516413698.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:38.823Z,1516413698.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:39.230Z,1516413699.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:39.632Z,1516413699.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:40.023Z,1516413700.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:40.414Z,1516413700.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:40.838Z,1516413700.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:41.231Z,1516413701.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:41.612Z,1516413701.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:42.019Z,1516413702.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:42.415Z,1516413702.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:42.815Z,1516413702.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:43.219Z,1516413703.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:43.626Z,1516413703.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:44.026Z,1516413704.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:44.419Z,1516413704.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:44.819Z,1516413704.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:45.216Z,1516413705.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:45.622Z,1516413705.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:46.019Z,1516413706.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:46.417Z,1516413706.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:46.827Z,1516413706.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:47.224Z,1516413707.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:47.636Z,1516413707.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:48.034Z,1516413708.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:48.415Z,1516413708.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:48.814Z,1516413708.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:49.222Z,1516413709.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:49.615Z,1516413709.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:50.023Z,1516413710.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:50.419Z,1516413710.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:50.815Z,1516413710.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:51.214Z,1516413711.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:51.623Z,1516413711.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:52.015Z,1516413712.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:52.416Z,1516413712.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:52.465Z,1516413712.465 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:01:52.466Z,1516413712.466 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-01-20T02:01:52.466Z,1516413712.466 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:01:52.490Z,1516413712.490 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:01:52.824Z,1516413712.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:52.879Z,1516413712.879 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:01:52.879Z,1516413712.879 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-01-20T02:01:53.227Z,1516413713.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:53.244Z,1516413713.244 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:01:53.277Z,1516413713.277 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:01:53.277Z,1516413713.277 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:01:53.618Z,1516413713.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:54.025Z,1516413714.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:54.424Z,1516413714.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:54.824Z,1516413714.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:55.222Z,1516413715.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:55.632Z,1516413715.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:56.031Z,1516413716.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:56.435Z,1516413716.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:56.835Z,1516413716.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:57.215Z,1516413717.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:57.619Z,1516413717.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:58.015Z,1516413718.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:58.413Z,1516413718.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:58.819Z,1516413718.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:59.215Z,1516413719.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:01:59.617Z,1516413719.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:00.024Z,1516413720.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:00.427Z,1516413720.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:00.838Z,1516413720.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:01.238Z,1516413721.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:01.624Z,1516413721.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:02.027Z,1516413722.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:02.425Z,1516413722.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:02.827Z,1516413722.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:03.220Z,1516413723.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:03.626Z,1516413723.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:06.894Z,1516413726.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:07.021Z,1516413727.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:07.375Z,1516413727.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:07.781Z,1516413727.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:08.178Z,1516413728.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:08.567Z,1516413728.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:08.963Z,1516413728.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:09.382Z,1516413729.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:09.785Z,1516413729.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:10.163Z,1516413730.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:10.563Z,1516413730.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:10.967Z,1516413730.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:11.380Z,1516413731.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:11.765Z,1516413731.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:12.167Z,1516413732.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:12.563Z,1516413732.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:12.981Z,1516413732.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:13.367Z,1516413733.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:13.791Z,1516413733.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:14.190Z,1516413734.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:14.567Z,1516413734.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:14.963Z,1516413734.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:15.364Z,1516413735.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:15.771Z,1516413735.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:16.163Z,1516413736.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:16.565Z,1516413736.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:16.971Z,1516413736.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:17.363Z,1516413737.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:17.761Z,1516413737.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:18.178Z,1516413738.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:18.586Z,1516413738.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:18.978Z,1516413738.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:19.390Z,1516413739.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:19.776Z,1516413739.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:20.175Z,1516413740.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:20.574Z,1516413740.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:20.976Z,1516413740.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:21.368Z,1516413741.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:21.781Z,1516413741.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:22.178Z,1516413742.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:22.198Z,1516413742.198 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T01:57:21.8Z
2018-01-20T02:02:22.198Z,1516413742.198 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T02:02:22.198Z,1516413742.198 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T02:02:22.566Z,1516413742.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:23.224Z,1516413743.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:23.383Z,1516413743.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:26.730Z,1516413746.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:26.829Z,1516413746.829 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0124.lzma
2018-01-20T02:02:26.865Z,1516413746.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:27.207Z,1516413747.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:27.575Z,1516413747.575 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0124.lzma.bak
2018-01-20T02:02:27.575Z,1516413747.575 [DataOverHttps](INFO): SBD MOMSN=7725801
2018-01-20T02:02:27.622Z,1516413747.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:28.062Z,1516413748.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:28.412Z,1516413748.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:31.703Z,1516413751.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:31.830Z,1516413751.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:32.177Z,1516413752.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:32.575Z,1516413752.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:32.990Z,1516413752.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:33.383Z,1516413753.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:36.646Z,1516413756.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:36.759Z,1516413756.759 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0128.lzma
2018-01-20T02:02:36.806Z,1516413756.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:37.102Z,1516413757.102 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T02:02:37.123Z,1516413757.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:37.499Z,1516413757.499 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0128.lzma.bak
2018-01-20T02:02:37.499Z,1516413757.499 [DataOverHttps](INFO): SBD MOMSN=7725806
2018-01-20T02:02:37.550Z,1516413757.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:38.035Z,1516413758.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:38.320Z,1516413758.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:41.619Z,1516413761.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:41.750Z,1516413761.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:42.112Z,1516413762.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:42.504Z,1516413762.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:42.908Z,1516413762.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:43.305Z,1516413763.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:46.570Z,1516413766.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:46.679Z,1516413766.679 [DataOverHttps](INFO): Sending 317 bytes from file Logs/20180119T210901/Express0125.lzma
2018-01-20T02:02:46.720Z,1516413766.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:47.067Z,1516413767.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:47.439Z,1516413767.439 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0125.lzma.bak
2018-01-20T02:02:47.439Z,1516413767.439 [DataOverHttps](INFO): SBD MOMSN=7725819
2018-01-20T02:02:47.486Z,1516413767.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:47.960Z,1516413767.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:48.270Z,1516413768.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:51.529Z,1516413771.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:51.654Z,1516413771.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:52.028Z,1516413772.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:52.431Z,1516413772.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:52.828Z,1516413772.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:53.231Z,1516413773.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:56.491Z,1516413776.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:56.591Z,1516413776.591 [DataOverHttps](INFO): Sending 52 bytes from file Logs/20180119T210901/Express0129.lzma
2018-01-20T02:02:56.611Z,1516413776.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:02:56.999Z,1516413776.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:00.636Z,1516413780.636 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0129.lzma.bak
2018-01-20T02:03:00.636Z,1516413780.636 [DataOverHttps](INFO): SBD MOMSN=7725833
2018-01-20T02:03:00.659Z,1516413780.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:00.916Z,1516413780.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:00.946Z,1516413780.946 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T02:03:00.946Z,1516413780.946 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T02:03:00.946Z,1516413780.946 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T02:03:01.182Z,1516413781.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:04.454Z,1516413784.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:04.583Z,1516413784.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:04.959Z,1516413784.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:05.357Z,1516413785.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:05.754Z,1516413785.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:06.160Z,1516413786.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:06.556Z,1516413786.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:06.958Z,1516413786.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:07.359Z,1516413787.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:07.730Z,1516413787.730 [NAL9602](INFO): Powering down
2018-01-20T02:03:07.760Z,1516413787.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:08.157Z,1516413788.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:08.557Z,1516413788.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:08.954Z,1516413788.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:09.357Z,1516413789.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:09.757Z,1516413789.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:10.155Z,1516413790.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:10.557Z,1516413790.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:10.959Z,1516413790.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:11.359Z,1516413791.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:11.757Z,1516413791.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:12.154Z,1516413792.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:12.562Z,1516413792.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:12.964Z,1516413792.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:13.354Z,1516413793.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:13.747Z,1516413793.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:14.163Z,1516413794.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:14.554Z,1516413794.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:14.962Z,1516413794.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:15.351Z,1516413795.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:15.751Z,1516413795.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:16.146Z,1516413796.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:16.555Z,1516413796.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:16.951Z,1516413796.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:17.347Z,1516413797.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:17.751Z,1516413797.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:18.151Z,1516413798.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:18.551Z,1516413798.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:18.967Z,1516413798.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:19.367Z,1516413799.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:19.747Z,1516413799.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:20.155Z,1516413800.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:20.553Z,1516413800.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:20.953Z,1516413800.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:21.350Z,1516413801.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:21.774Z,1516413801.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:22.159Z,1516413802.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:22.578Z,1516413802.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:22.974Z,1516413802.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:23.386Z,1516413803.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:23.759Z,1516413803.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:24.176Z,1516413804.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:24.551Z,1516413804.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:24.980Z,1516413804.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:25.357Z,1516413805.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:25.756Z,1516413805.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:26.161Z,1516413806.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:26.575Z,1516413806.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:26.960Z,1516413806.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:27.374Z,1516413807.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:27.760Z,1516413807.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:28.152Z,1516413808.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:28.552Z,1516413808.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:28.000Z,1516413809.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:29.358Z,1516413809.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:29.760Z,1516413809.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:30.180Z,1516413810.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:30.559Z,1516413810.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:30.960Z,1516413810.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:31.374Z,1516413811.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:31.771Z,1516413811.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:32.152Z,1516413812.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:32.566Z,1516413812.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:32.957Z,1516413812.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:33.371Z,1516413813.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:33.774Z,1516413813.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:34.153Z,1516413814.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:34.552Z,1516413814.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:34.966Z,1516413814.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:35.178Z,1516413815.178 [CommandLine](IMPORTANT): got command run ./Missions/Insert/AbortDrift.xml
2018-01-20T02:03:35.178Z,1516413815.178 [MissionManager](INFO): Loading Mission: ./Missions/Insert/AbortDrift.xml
2018-01-20T02:03:35.235Z,1516413815.235 [MissionManager](INFO): DefineArg AbortDrift.AcousticTimeout = 96.000000 h
2018-01-20T02:03:35.238Z,1516413815.238 [MissionManager](INFO): DefineArg AbortDrift.FromLastAcousticReceiveToNow = nan h
2018-01-20T02:03:35.247Z,1516413815.247 [MissionManager](INFO): DefineArg AbortDrift.FromLastTimeFixToNow = nan h
2018-01-20T02:03:35.250Z,1516413815.250 [MissionManager](INFO): DefineArg AbortDrift.SyslogStop = 0 bool
2018-01-20T02:03:35.263Z,1516413815.263 [AbortDrift:D.Execute](DEBUG): Construct Execute.
2018-01-20T02:03:35.269Z,1516413815.269 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Aggregate xmlns="Tethys"
       xmlns:Guidance="Tethys/Guidance"
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="AbortDrift">

    <DefineArg Name="AcousticTimeout"><Description>
        Drifting for longer than this period without receiving any acoustic
        signals will trigger the abort.
    </Description><Units:hour/><Value>96</Value></DefineArg>

    <DefineArg Name="FromLastAcousticReceiveToNow"><Description>
        Elapsed time from last acoustic reception to now.
    </Description><Units:hour/><Value>NaN</Value></DefineArg>

    <DefineArg Name="FromLastTimeFixToNow"><Description>
        Elapsed time from last time_fix to now.
    </Description><Units:hour/><Value>NaN</Value></DefineArg>

    <DefineArg Name="SyslogStop"><Description>
        Flag of Syslog of stop.
    </Description><False/></DefineArg>

    <When>
        <Not><IsNaN>
            <Universal:acoustic_receive_time/>
        </IsNaN></Not>
        <And><Elapsed><Universal:acoustic_receive_time/></Elapsed><Gt><Arg Name="AcousticTimeout"/></Gt></And>
        <And><Elapsed><Universal:time_fix/></Elapsed><Gt><Arg Name="AcousticTimeout"/></Gt></And>
        <And><Not><Arg Name="SyslogStop"/></Not></And>
        <Or><IsNaN>
            <Universal:acoustic_receive_time/>
        </IsNaN><And><Elapsed><Universal:time_fix/></Elapsed><Gt><Arg Name="AcousticTimeout"/></Gt></And><And><Not><Arg Name="SyslogStop"/></Not></And></Or>
    </When>

    <Assign><Sequence/><Arg Name="FromLastTimeFixToNow"/><Elapsed><Universal:time_fix/></Elapsed></Assign>

    <Aggregate Id="TimeoutExpiredAcousticReceive">

        <When>
            <Not><IsNaN>
                <Universal:acoustic_receive_time/>
            </IsNaN></Not>
        </When>

        <Assign><Sequence/><Arg Name="FromLastAcousticReceiveToNow"/><Elapsed><Universal:acoustic_receive_time/></Elapsed></Assign>

        <Syslog Severity="Important">Acoustic timeout <Arg Name="AcousticTimeout"/><Units:hour/> exceeded. Elapsed time since last acoustic reception = <Arg Name="FromLastAcousticReceiveToNow"/><Units:hour/>, Elapsed time since last time_fix = <Arg Name="FromLastTimeFixToNow"/><Units:hour/>. Aborting drift by executing stop command.</Syslog>

    </Aggregate>

    <Aggregate Id="TimeoutExpiredNoAcousticReceive">

        <When>
            <IsNaN>
                <Universal:acoustic_receive_time/>
            </IsNaN>
        </When>

        <Syslog Severity="Important">Acoustic timeout <Arg Name="AcousticTimeout"/><Units:hour/> exceeded. No acoustic reception ever. Elapsed time since last time_fix = <Arg Name="FromLastTimeFixToNow"/><Units:hour/>. Aborting drift by executing stop command.</Syslog>

    </Aggregate>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>stop</String></Setting>
    </Guidance:Execute>

    <Assign><Sequence/><Arg Name="SyslogStop"/><True/></Assign>

</Aggregate>


2018-01-20T02:03:35.271Z,1516413815.271 [CommandLine](IMPORTANT): Running ./Missions/Insert/AbortDrift.xml
2018-01-20T02:03:35.350Z,1516413815.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:35.377Z,1516413815.377 [Default] Stopped
2018-01-20T02:03:35.378Z,1516413815.378 [Default](DEBUG): Aggregate::uninitialize Default
2018-01-20T02:03:35.378Z,1516413815.378 [Default:B.GoToSurface] Stopped
2018-01-20T02:03:35.378Z,1516413815.378 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-01-20T02:03:35.378Z,1516413815.378 [Default:CheckIn] Stopped
2018-01-20T02:03:35.378Z,1516413815.378 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T02:03:35.378Z,1516413815.378 [Default:CheckIn:C.Wait] Stopped
2018-01-20T02:03:35.378Z,1516413815.378 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T02:03:35.378Z,1516413815.378 [MissionManager](IMPORTANT): Started mission AbortDrift
2018-01-20T02:03:35.378Z,1516413815.378 [AbortDrift] Running Loop=1
2018-01-20T02:03:35.379Z,1516413815.379 [AbortDrift](DEBUG): Aggregate::initialize AbortDrift
2018-01-20T02:03:35.379Z,1516413815.379 [AbortDrift:A] Running Loop=1
2018-01-20T02:03:35.379Z,1516413815.379 [AbortDrift:TimeoutExpiredAcousticReceive] Running Loop=1
2018-01-20T02:03:35.379Z,1516413815.379 [AbortDrift:TimeoutExpiredAcousticReceive](DEBUG): Aggregate::initialize AbortDrift:TimeoutExpiredAcousticReceive
2018-01-20T02:03:35.379Z,1516413815.379 [AbortDrift:TimeoutExpiredAcousticReceive:A] Running Loop=1
2018-01-20T02:03:35.380Z,1516413815.380 [AbortDrift:TimeoutExpiredAcousticReceive:A] Stopped
2018-01-20T02:03:35.380Z,1516413815.380 [AbortDrift:TimeoutExpiredAcousticReceive:B] Running Loop=1
2018-01-20T02:03:35.381Z,1516413815.381 [AbortDrift:A] Stopped
2018-01-20T02:03:35.381Z,1516413815.381 [AbortDrift:D.Execute] Running Loop=1
2018-01-20T02:03:35.751Z,1516413815.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:35.788Z,1516413815.788 [AbortDrift:D.Execute](INFO): Executing command stop
2018-01-20T02:03:35.793Z,1516413815.793 [AbortDrift:D.Execute] Stopped
2018-01-20T02:03:35.793Z,1516413815.793 [AbortDrift:E] Running Loop=1
2018-01-20T02:03:35.794Z,1516413815.794 [AbortDrift:TimeoutExpiredAcousticReceive:B](IMPORTANT): Acoustic timeout 96.000000 h exceeded. Elapsed time since last acoustic reception = 4.493315 h , Elapsed time since last time_fix = 0.115177 h . Aborting drift by executing stop command.
2018-01-20T02:03:35.795Z,1516413815.795 [AbortDrift:TimeoutExpiredAcousticReceive:B] Stopped
2018-01-20T02:03:35.795Z,1516413815.795 [AbortDrift:TimeoutExpiredAcousticReceive](INFO): Completed AbortDrift:TimeoutExpiredAcousticReceive
2018-01-20T02:03:35.795Z,1516413815.795 [AbortDrift:TimeoutExpiredAcousticReceive] Stopped
2018-01-20T02:03:35.795Z,1516413815.795 [AbortDrift:TimeoutExpiredAcousticReceive](DEBUG): Aggregate::uninitialize AbortDrift:TimeoutExpiredAcousticReceive
2018-01-20T02:03:35.873Z,1516413815.873 [CommandLine](IMPORTANT): got command stop
2018-01-20T02:03:35.873Z,1516413815.873 [Supervisor](INFO): Stop Mission called by CommandLine::commandStop
2018-01-20T02:03:36.163Z,1516413816.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:36.195Z,1516413816.195 [AbortDrift:E] Stopped
2018-01-20T02:03:36.196Z,1516413816.196 [AbortDrift:TimeoutExpiredAcousticReceive] Running Loop=1
2018-01-20T02:03:36.196Z,1516413816.196 [AbortDrift:TimeoutExpiredAcousticReceive](DEBUG): Aggregate::initialize AbortDrift:TimeoutExpiredAcousticReceive
2018-01-20T02:03:36.196Z,1516413816.196 [AbortDrift:TimeoutExpiredAcousticReceive:A] Running Loop=1
2018-01-20T02:03:36.196Z,1516413816.196 [AbortDrift:TimeoutExpiredAcousticReceive:A] Stopped
2018-01-20T02:03:36.196Z,1516413816.196 [AbortDrift:TimeoutExpiredAcousticReceive:B] Running Loop=1
2018-01-20T02:03:36.196Z,1516413816.196 [AbortDrift](INFO): Completed AbortDrift
2018-01-20T02:03:36.196Z,1516413816.196 [MissionManager](INFO): MissionManager is completed.
2018-01-20T02:03:36.197Z,1516413816.197 [MissionManager](INFO): Uninitializing Mission AbortDrift
2018-01-20T02:03:36.197Z,1516413816.197 [AbortDrift] Stopped
2018-01-20T02:03:36.197Z,1516413816.197 [AbortDrift](DEBUG): Aggregate::uninitialize AbortDrift
2018-01-20T02:03:36.197Z,1516413816.197 [AbortDrift:TimeoutExpiredAcousticReceive] Stopped
2018-01-20T02:03:36.197Z,1516413816.197 [AbortDrift:TimeoutExpiredAcousticReceive](DEBUG): Aggregate::uninitialize AbortDrift:TimeoutExpiredAcousticReceive
2018-01-20T02:03:36.197Z,1516413816.197 [AbortDrift:TimeoutExpiredAcousticReceive:B] Stopped
2018-01-20T02:03:36.551Z,1516413816.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:36.625Z,1516413816.625 [MissionManager](IMPORTANT): Started mission Default
2018-01-20T02:03:36.625Z,1516413816.625 [Default] Running Loop=1
2018-01-20T02:03:36.626Z,1516413816.626 [Default](DEBUG): Aggregate::initialize Default
2018-01-20T02:03:36.626Z,1516413816.626 [Default:B.GoToSurface] Running Loop=1
2018-01-20T02:03:36.626Z,1516413816.626 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-01-20T02:03:36.626Z,1516413816.626 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-01-20T02:03:36.626Z,1516413816.626 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-01-20T02:03:36.627Z,1516413816.627 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-01-20T02:03:36.627Z,1516413816.627 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2018-01-20T02:03:36.627Z,1516413816.627 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-01-20T02:03:36.627Z,1516413816.627 [Default:A.Wait] Running Loop=1
2018-01-20T02:03:36.628Z,1516413816.628 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-01-20T02:03:36.961Z,1516413816.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:37.363Z,1516413817.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:37.755Z,1516413817.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:38.157Z,1516413818.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:38.557Z,1516413818.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:38.956Z,1516413818.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:39.357Z,1516413819.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:39.759Z,1516413819.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:40.156Z,1516413820.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:40.556Z,1516413820.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:40.957Z,1516413820.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:41.360Z,1516413821.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:41.755Z,1516413821.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:42.170Z,1516413822.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:42.555Z,1516413822.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:42.956Z,1516413822.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:43.362Z,1516413823.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:43.747Z,1516413823.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:44.155Z,1516413824.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:44.551Z,1516413824.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:44.954Z,1516413824.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:45.348Z,1516413825.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:45.756Z,1516413825.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:46.158Z,1516413826.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:46.554Z,1516413826.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:46.954Z,1516413826.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:47.360Z,1516413827.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:47.758Z,1516413827.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:48.155Z,1516413828.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:48.551Z,1516413828.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:48.962Z,1516413828.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:49.356Z,1516413829.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:49.755Z,1516413829.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:49.775Z,1516413829.775 [Default:A.Wait](INFO): Done Waiting.
2018-01-20T02:03:49.776Z,1516413829.776 [Default:A.Wait] Stopped
2018-01-20T02:03:49.776Z,1516413829.776 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T02:03:50.154Z,1516413830.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:50.176Z,1516413830.176 [Default:CheckIn] Running Loop=1
2018-01-20T02:03:50.176Z,1516413830.176 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T02:03:50.176Z,1516413830.176 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T02:03:50.553Z,1516413830.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:50.937Z,1516413830.937 [NAL9602](INFO): Powering up
2018-01-20T02:03:50.969Z,1516413830.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:51.352Z,1516413831.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:51.754Z,1516413831.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:52.159Z,1516413832.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:52.554Z,1516413832.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:52.968Z,1516413832.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:53.363Z,1516413833.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:53.756Z,1516413833.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:54.168Z,1516413834.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:54.546Z,1516413834.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:54.947Z,1516413834.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:55.354Z,1516413835.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:55.747Z,1516413835.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:56.146Z,1516413836.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:56.563Z,1516413836.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:56.947Z,1516413836.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:57.360Z,1516413837.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:57.754Z,1516413837.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:58.163Z,1516413838.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:58.549Z,1516413838.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:58.947Z,1516413838.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:59.347Z,1516413839.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:03:59.744Z,1516413839.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:00.151Z,1516413840.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:00.546Z,1516413840.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:00.955Z,1516413840.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:01.347Z,1516413841.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:04.638Z,1516413844.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:04.765Z,1516413844.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:05.115Z,1516413845.115 [NAL9602](INFO): NAL9602 initialized
2018-01-20T02:04:05.132Z,1516413845.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:05.536Z,1516413845.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:05.936Z,1516413845.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:06.340Z,1516413846.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:06.745Z,1516413846.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:07.139Z,1516413847.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:07.530Z,1516413847.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:07.924Z,1516413847.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:08.323Z,1516413848.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:08.747Z,1516413848.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:09.123Z,1516413849.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:09.522Z,1516413849.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:09.927Z,1516413849.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:10.323Z,1516413850.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:10.723Z,1516413850.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:11.127Z,1516413851.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:11.523Z,1516413851.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:11.925Z,1516413851.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:12.327Z,1516413852.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:12.740Z,1516413852.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:13.140Z,1516413853.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:13.527Z,1516413853.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:13.940Z,1516413853.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:14.324Z,1516413854.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:14.727Z,1516413854.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:15.127Z,1516413855.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:15.524Z,1516413855.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:15.932Z,1516413855.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:16.323Z,1516413856.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:16.720Z,1516413856.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:17.127Z,1516413857.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:17.523Z,1516413857.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:17.927Z,1516413857.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:18.335Z,1516413858.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:18.735Z,1516413858.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:19.128Z,1516413859.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:19.534Z,1516413859.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:19.931Z,1516413859.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:20.328Z,1516413860.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:20.734Z,1516413860.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:21.131Z,1516413861.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:21.532Z,1516413861.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:21.936Z,1516413861.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:22.332Z,1516413862.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:22.729Z,1516413862.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:23.133Z,1516413863.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:23.531Z,1516413863.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:23.929Z,1516413863.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:24.333Z,1516413864.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:24.731Z,1516413864.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:25.128Z,1516413865.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:25.538Z,1516413865.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:25.932Z,1516413865.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:26.326Z,1516413866.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:26.730Z,1516413866.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:27.123Z,1516413867.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:27.523Z,1516413867.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:27.930Z,1516413867.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:28.323Z,1516413868.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:28.720Z,1516413868.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:29.130Z,1516413869.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:29.523Z,1516413869.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:29.924Z,1516413869.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:30.330Z,1516413870.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:30.740Z,1516413870.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:31.138Z,1516413871.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:31.527Z,1516413871.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:31.923Z,1516413871.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:32.324Z,1516413872.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:32.727Z,1516413872.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:33.123Z,1516413873.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:33.522Z,1516413873.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:33.927Z,1516413873.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:34.340Z,1516413874.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:34.724Z,1516413874.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:35.144Z,1516413875.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:35.523Z,1516413875.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:35.925Z,1516413875.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:36.327Z,1516413876.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:36.735Z,1516413876.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:37.114Z,1516413877.114 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-01-20T02:04:37.190Z,1516413877.190 [NAL9602](FAULT): received: 
+CSQ:0

OK62, 2, 0, 0, 0

OK
2018-01-20T02:04:37.190Z,1516413877.190 [NAL9602] Data Fault, FailCount= 2
2018-01-20T02:04:37.190Z,1516413877.190 [NAL9602](ERROR): Data Fault
2018-01-20T02:04:37.208Z,1516413877.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:37.285Z,1516413877.285 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T02:04:37.510Z,1516413877.510 [NAL9602](INFO): Powering down
2018-01-20T02:04:37.528Z,1516413877.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:37.940Z,1516413877.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:38.328Z,1516413878.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:38.379Z,1516413878.379 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T02:04:38.380Z,1516413878.380 [NAL9602] No Fault, FailCount= 2
2018-01-20T02:04:38.735Z,1516413878.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:39.131Z,1516413879.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:39.527Z,1516413879.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:39.938Z,1516413879.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:40.336Z,1516413880.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:40.730Z,1516413880.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:41.134Z,1516413881.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:41.533Z,1516413881.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:41.934Z,1516413881.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:42.330Z,1516413882.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:42.738Z,1516413882.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:43.137Z,1516413883.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:43.534Z,1516413883.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:43.933Z,1516413883.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:44.322Z,1516413884.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:44.722Z,1516413884.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:45.130Z,1516413885.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:45.522Z,1516413885.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:45.922Z,1516413885.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:46.327Z,1516413886.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:46.722Z,1516413886.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:47.122Z,1516413887.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:47.527Z,1516413887.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:47.922Z,1516413887.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:48.334Z,1516413888.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:48.731Z,1516413888.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:49.122Z,1516413889.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:49.530Z,1516413889.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:49.931Z,1516413889.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:50.332Z,1516413890.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:50.734Z,1516413890.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:51.131Z,1516413891.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:51.534Z,1516413891.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:51.936Z,1516413891.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:52.332Z,1516413892.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:52.736Z,1516413892.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:53.137Z,1516413893.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:53.530Z,1516413893.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:53.555Z,1516413893.555 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:04:53.555Z,1516413893.555 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-01-20T02:04:53.556Z,1516413893.556 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:04:53.576Z,1516413893.576 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:04:53.931Z,1516413893.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:53.961Z,1516413893.961 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:04:53.961Z,1516413893.961 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-01-20T02:04:54.332Z,1516413894.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:54.355Z,1516413894.355 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:04:54.355Z,1516413894.355 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:04:54.355Z,1516413894.355 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:04:54.723Z,1516413894.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:55.122Z,1516413895.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:55.540Z,1516413895.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:55.924Z,1516413895.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:56.322Z,1516413896.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:56.722Z,1516413896.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:57.130Z,1516413897.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:57.534Z,1516413897.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:57.935Z,1516413897.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:58.330Z,1516413898.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:58.726Z,1516413898.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:59.126Z,1516413899.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:59.528Z,1516413899.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:04:59.933Z,1516413899.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:00.332Z,1516413900.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:00.728Z,1516413900.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:01.130Z,1516413901.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:01.534Z,1516413901.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:04.851Z,1516413904.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:04.981Z,1516413904.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:05.337Z,1516413905.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:05.747Z,1516413905.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:06.139Z,1516413906.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:06.538Z,1516413906.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:06.942Z,1516413906.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:07.337Z,1516413907.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:07.722Z,1516413907.722 [NAL9602](INFO): Powering up NAL9602
2018-01-20T02:05:07.753Z,1516413907.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:08.131Z,1516413908.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:08.531Z,1516413908.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:08.930Z,1516413908.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:09.347Z,1516413909.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:09.730Z,1516413909.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:10.143Z,1516413910.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:10.531Z,1516413910.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:10.931Z,1516413910.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:11.330Z,1516413911.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:11.748Z,1516413911.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:12.131Z,1516413912.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:12.548Z,1516413912.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:12.927Z,1516413912.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:13.334Z,1516413913.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:13.748Z,1516413913.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:14.131Z,1516413914.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:14.531Z,1516413914.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:14.949Z,1516413914.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:15.329Z,1516413915.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:15.731Z,1516413915.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:16.131Z,1516413916.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:16.532Z,1516413916.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:16.938Z,1516413916.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:17.339Z,1516413917.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:17.732Z,1516413917.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:18.140Z,1516413918.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:18.544Z,1516413918.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:18.918Z,1516413918.918 [NAL9602](INFO): NAL9602 initialized
2018-01-20T02:05:18.947Z,1516413918.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:19.339Z,1516413919.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:19.754Z,1516413919.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:20.154Z,1516413920.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:20.549Z,1516413920.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:20.931Z,1516413920.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:21.332Z,1516413921.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:21.754Z,1516413921.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:22.159Z,1516413922.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:22.550Z,1516413922.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:22.938Z,1516413922.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:23.331Z,1516413923.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:23.727Z,1516413923.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:24.131Z,1516413924.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:24.531Z,1516413924.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:24.929Z,1516413924.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:25.331Z,1516413925.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:25.735Z,1516413925.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:26.139Z,1516413926.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:26.554Z,1516413926.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:26.954Z,1516413926.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:27.346Z,1516413927.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:27.754Z,1516413927.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:28.140Z,1516413928.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:28.529Z,1516413928.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:28.939Z,1516413928.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:29.344Z,1516413929.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:29.732Z,1516413929.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:30.139Z,1516413930.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:30.540Z,1516413930.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:30.929Z,1516413930.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:31.339Z,1516413931.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:31.751Z,1516413931.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:32.150Z,1516413932.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:32.558Z,1516413932.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:32.951Z,1516413932.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:33.331Z,1516413933.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:33.747Z,1516413933.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:34.148Z,1516413934.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:34.529Z,1516413934.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:34.932Z,1516413934.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:35.331Z,1516413935.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:35.726Z,1516413935.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:36.149Z,1516413936.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:36.548Z,1516413936.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:36.948Z,1516413936.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:37.360Z,1516413937.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:37.759Z,1516413937.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:38.190Z,1516413938.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:38.539Z,1516413938.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:38.940Z,1516413938.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:39.330Z,1516413939.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:39.731Z,1516413939.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:40.139Z,1516413940.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:40.529Z,1516413940.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:40.939Z,1516413940.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:41.339Z,1516413941.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:41.732Z,1516413941.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:42.153Z,1516413942.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:42.554Z,1516413942.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:42.945Z,1516413942.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:43.352Z,1516413943.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:43.735Z,1516413943.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:44.137Z,1516413944.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:44.533Z,1516413944.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:44.942Z,1516413944.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:45.331Z,1516413945.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:45.762Z,1516413945.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:46.134Z,1516413946.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:46.544Z,1516413946.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:46.930Z,1516413946.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:47.355Z,1516413947.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:47.749Z,1516413947.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:48.144Z,1516413948.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:48.544Z,1516413948.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:48.942Z,1516413948.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:49.343Z,1516413949.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:49.746Z,1516413949.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:50.137Z,1516413950.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:50.537Z,1516413950.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:50.959Z,1516413950.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:51.339Z,1516413951.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:51.732Z,1516413951.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:52.165Z,1516413952.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:52.546Z,1516413952.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:52.950Z,1516413952.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:53.350Z,1516413953.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:53.743Z,1516413953.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:54.135Z,1516413954.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:54.536Z,1516413954.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:54.936Z,1516413954.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:55.335Z,1516413955.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:55.741Z,1516413955.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:56.137Z,1516413956.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:56.540Z,1516413956.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:56.945Z,1516413956.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:57.330Z,1516413957.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:57.749Z,1516413957.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:58.154Z,1516413958.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:58.554Z,1516413958.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:58.950Z,1516413958.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:59.331Z,1516413959.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:05:59.731Z,1516413959.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:00.131Z,1516413960.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:00.548Z,1516413960.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:00.935Z,1516413960.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:01.330Z,1516413961.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:01.749Z,1516413961.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:05.014Z,1516413965.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:05.152Z,1516413965.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:05.530Z,1516413965.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:05.930Z,1516413965.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:06.315Z,1516413966.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:06.715Z,1516413966.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:07.112Z,1516413967.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:07.510Z,1516413967.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:07.917Z,1516413967.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:08.306Z,1516413968.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:08.702Z,1516413968.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:09.114Z,1516413969.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:09.503Z,1516413969.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:09.920Z,1516413969.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:10.327Z,1516413970.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:10.720Z,1516413970.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:11.121Z,1516413971.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:11.518Z,1516413971.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:11.900Z,1516413971.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:12.302Z,1516413972.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:12.703Z,1516413972.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:13.101Z,1516413973.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:13.505Z,1516413973.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:13.907Z,1516413973.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:14.303Z,1516413974.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:14.700Z,1516413974.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:15.114Z,1516413975.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:15.529Z,1516413975.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:15.927Z,1516413975.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:16.330Z,1516413976.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:16.711Z,1516413976.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:17.111Z,1516413977.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:17.511Z,1516413977.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:17.914Z,1516413977.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:18.314Z,1516413978.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:18.714Z,1516413978.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:19.111Z,1516413979.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:19.508Z,1516413979.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:19.916Z,1516413979.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:20.322Z,1516413980.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:20.721Z,1516413980.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:21.129Z,1516413981.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:21.527Z,1516413981.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:21.904Z,1516413981.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:22.305Z,1516413982.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:22.703Z,1516413982.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:23.099Z,1516413983.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:23.511Z,1516413983.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:23.901Z,1516413983.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:24.307Z,1516413984.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:24.714Z,1516413984.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:24.720Z,1516413984.720 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2018-01-20T02:06:25.105Z,1516413985.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:25.526Z,1516413985.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:25.928Z,1516413985.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:26.324Z,1516413986.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:26.719Z,1516413986.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:27.113Z,1516413987.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:27.513Z,1516413987.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:27.907Z,1516413987.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:27.916Z,1516413987.916 [PNI_TCM](ERROR): CRC does not match. Expected:0x58008 got:0x50942
2018-01-20T02:06:28.313Z,1516413988.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:28.319Z,1516413988.319 [PNI_TCM](ERROR): CRC does not match. Expected:0x31855 got:0x5906
2018-01-20T02:06:28.716Z,1516413988.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:29.107Z,1516413989.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:29.513Z,1516413989.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:29.908Z,1516413989.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:30.312Z,1516413990.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:30.720Z,1516413990.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:31.119Z,1516413991.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:31.529Z,1516413991.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:31.921Z,1516413991.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:32.298Z,1516413992.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:32.699Z,1516413992.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:33.107Z,1516413993.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:33.501Z,1516413993.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:33.907Z,1516413993.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:34.311Z,1516413994.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:34.699Z,1516413994.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:35.100Z,1516413995.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:35.504Z,1516413995.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:35.911Z,1516413995.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:36.316Z,1516413996.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:36.724Z,1516413996.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:37.123Z,1516413997.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:37.511Z,1516413997.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:37.916Z,1516413997.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:38.307Z,1516413998.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:38.705Z,1516413998.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:39.115Z,1516413999.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:39.504Z,1516413999.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:39.906Z,1516413999.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:40.308Z,1516414000.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:40.715Z,1516414000.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:41.117Z,1516414001.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:41.523Z,1516414001.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:41.916Z,1516414001.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:42.326Z,1516414002.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:42.703Z,1516414002.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:43.098Z,1516414003.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:43.499Z,1516414003.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:43.915Z,1516414003.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:44.298Z,1516414004.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:44.703Z,1516414004.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:45.111Z,1516414005.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:45.507Z,1516414005.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:45.904Z,1516414005.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:46.324Z,1516414006.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:46.711Z,1516414006.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:47.110Z,1516414007.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:47.510Z,1516414007.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:47.907Z,1516414007.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:48.306Z,1516414008.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:48.712Z,1516414008.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:49.115Z,1516414009.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:49.506Z,1516414009.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:49.911Z,1516414009.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:50.310Z,1516414010.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:50.699Z,1516414010.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:51.111Z,1516414011.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:51.516Z,1516414011.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:51.918Z,1516414011.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:52.318Z,1516414012.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:52.718Z,1516414012.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:53.099Z,1516414013.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:53.503Z,1516414013.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:53.898Z,1516414013.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:54.299Z,1516414014.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:54.703Z,1516414014.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:55.108Z,1516414015.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:55.503Z,1516414015.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:55.915Z,1516414015.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:56.303Z,1516414016.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:56.712Z,1516414016.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:57.117Z,1516414017.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:57.518Z,1516414017.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:57.917Z,1516414017.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:58.311Z,1516414018.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:58.698Z,1516414018.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:59.099Z,1516414019.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:59.499Z,1516414019.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:06:59.915Z,1516414019.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:00.299Z,1516414020.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:00.703Z,1516414020.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:01.115Z,1516414021.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:01.499Z,1516414021.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:01.918Z,1516414021.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:05.183Z,1516414025.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:05.326Z,1516414025.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:05.712Z,1516414025.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:06.088Z,1516414026.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:06.492Z,1516414026.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:06.892Z,1516414026.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:07.294Z,1516414027.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:07.691Z,1516414027.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:08.091Z,1516414028.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:08.486Z,1516414028.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:08.891Z,1516414028.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:09.291Z,1516414029.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:09.696Z,1516414029.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:10.110Z,1516414030.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:10.513Z,1516414030.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:10.911Z,1516414030.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:11.279Z,1516414031.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:11.679Z,1516414031.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:12.082Z,1516414032.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:12.491Z,1516414032.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:12.888Z,1516414032.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:13.284Z,1516414033.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:13.691Z,1516414033.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:14.087Z,1516414034.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:14.492Z,1516414034.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:14.911Z,1516414034.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:15.294Z,1516414035.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:15.704Z,1516414035.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:16.106Z,1516414036.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:16.491Z,1516414036.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:16.895Z,1516414036.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:17.293Z,1516414037.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:17.692Z,1516414037.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:18.093Z,1516414038.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:18.479Z,1516414038.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:18.895Z,1516414038.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:19.278Z,1516414039.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:19.679Z,1516414039.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:20.113Z,1516414040.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:20.504Z,1516414040.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:20.903Z,1516414040.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:21.308Z,1516414041.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:21.678Z,1516414041.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:22.079Z,1516414042.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:22.486Z,1516414042.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:22.887Z,1516414042.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:23.286Z,1516414043.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:23.687Z,1516414043.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:24.093Z,1516414044.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:24.492Z,1516414044.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:24.892Z,1516414044.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:25.307Z,1516414045.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:25.706Z,1516414045.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:26.107Z,1516414046.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:26.511Z,1516414046.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:26.895Z,1516414046.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:27.296Z,1516414047.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:27.683Z,1516414047.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:28.079Z,1516414048.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:28.483Z,1516414048.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:28.884Z,1516414048.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:29.283Z,1516414049.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:29.687Z,1516414049.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:30.087Z,1516414050.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:30.514Z,1516414050.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:30.918Z,1516414050.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:31.310Z,1516414051.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:31.714Z,1516414051.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:32.092Z,1516414052.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:32.488Z,1516414052.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:32.892Z,1516414052.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:33.288Z,1516414053.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:33.688Z,1516414053.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:34.086Z,1516414054.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:34.492Z,1516414054.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:34.894Z,1516414054.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:35.295Z,1516414055.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:35.712Z,1516414055.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:36.108Z,1516414056.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:36.512Z,1516414056.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:36.909Z,1516414056.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:37.287Z,1516414057.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:37.679Z,1516414057.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:38.079Z,1516414058.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:38.491Z,1516414058.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:38.888Z,1516414058.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:39.293Z,1516414059.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:39.691Z,1516414059.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:40.095Z,1516414060.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:40.493Z,1516414060.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:40.904Z,1516414060.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:41.303Z,1516414061.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:41.708Z,1516414061.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:42.107Z,1516414062.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:42.495Z,1516414062.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:42.883Z,1516414062.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:43.280Z,1516414063.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:43.687Z,1516414063.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:44.084Z,1516414064.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:44.477Z,1516414064.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:44.879Z,1516414064.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:45.279Z,1516414065.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:45.681Z,1516414065.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:46.115Z,1516414066.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:46.515Z,1516414066.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:46.894Z,1516414066.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:47.311Z,1516414067.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:47.688Z,1516414067.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:48.091Z,1516414068.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:48.488Z,1516414068.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:48.891Z,1516414068.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:49.284Z,1516414069.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:49.691Z,1516414069.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:50.092Z,1516414070.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:50.482Z,1516414070.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:50.892Z,1516414070.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:51.303Z,1516414071.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:51.694Z,1516414071.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:52.106Z,1516414072.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:52.507Z,1516414072.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:52.880Z,1516414072.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:53.291Z,1516414073.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:53.692Z,1516414073.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:54.094Z,1516414074.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:54.494Z,1516414074.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:54.519Z,1516414074.519 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:07:54.520Z,1516414074.520 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-01-20T02:07:54.520Z,1516414074.520 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:07:54.532Z,1516414074.532 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:07:54.883Z,1516414074.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:54.935Z,1516414074.935 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:07:54.935Z,1516414074.935 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-01-20T02:07:55.279Z,1516414075.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:55.323Z,1516414075.323 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:07:55.324Z,1516414075.324 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:07:55.324Z,1516414075.324 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:07:55.687Z,1516414075.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:56.091Z,1516414076.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:56.510Z,1516414076.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:56.890Z,1516414076.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:57.313Z,1516414077.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:57.706Z,1516414077.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:58.087Z,1516414078.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:58.487Z,1516414078.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:58.883Z,1516414078.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:59.288Z,1516414079.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:07:59.683Z,1516414079.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:00.088Z,1516414080.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:00.492Z,1516414080.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:00.892Z,1516414080.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:01.288Z,1516414081.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:01.703Z,1516414081.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:02.107Z,1516414082.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:05.378Z,1516414085.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:05.526Z,1516414085.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:05.871Z,1516414085.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:06.264Z,1516414086.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:06.682Z,1516414086.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:07.070Z,1516414087.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:07.473Z,1516414087.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:07.876Z,1516414087.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:08.266Z,1516414088.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:08.653Z,1516414088.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:09.054Z,1516414089.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:09.455Z,1516414089.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:09.853Z,1516414089.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:10.255Z,1516414090.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:10.659Z,1516414090.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:11.071Z,1516414091.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:11.459Z,1516414091.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:11.885Z,1516414091.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:12.278Z,1516414092.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:12.674Z,1516414092.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:13.078Z,1516414093.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:13.457Z,1516414093.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:13.855Z,1516414093.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:14.263Z,1516414094.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:14.657Z,1516414094.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:15.063Z,1516414095.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:15.463Z,1516414095.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:15.857Z,1516414095.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:16.259Z,1516414096.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:16.663Z,1516414096.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:17.074Z,1516414097.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:17.482Z,1516414097.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:17.873Z,1516414097.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:18.274Z,1516414098.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:18.663Z,1516414098.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:19.064Z,1516414099.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:19.465Z,1516414099.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:19.863Z,1516414099.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:20.268Z,1516414100.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:20.658Z,1516414100.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:21.062Z,1516414101.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:21.464Z,1516414101.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:21.864Z,1516414101.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:22.281Z,1516414102.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:22.678Z,1516414102.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:23.073Z,1516414103.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:23.482Z,1516414103.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:23.871Z,1516414103.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:24.260Z,1516414104.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:24.659Z,1516414104.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:25.073Z,1516414105.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:25.456Z,1516414105.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:25.858Z,1516414105.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:26.255Z,1516414106.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:26.657Z,1516414106.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:27.063Z,1516414107.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:27.474Z,1516414107.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:27.866Z,1516414107.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:28.278Z,1516414108.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:28.678Z,1516414108.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:29.061Z,1516414109.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:29.465Z,1516414109.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:29.863Z,1516414109.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:30.259Z,1516414110.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:30.667Z,1516414110.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:31.064Z,1516414111.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:31.465Z,1516414111.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:31.876Z,1516414111.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:32.268Z,1516414112.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:32.677Z,1516414112.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:33.078Z,1516414113.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:33.486Z,1516414113.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:33.874Z,1516414113.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:34.259Z,1516414114.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:34.672Z,1516414114.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:35.055Z,1516414115.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:35.463Z,1516414115.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:35.859Z,1516414115.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:36.254Z,1516414116.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:36.662Z,1516414116.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:37.059Z,1516414117.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:37.455Z,1516414117.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:37.878Z,1516414117.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:38.278Z,1516414118.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:38.666Z,1516414118.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:39.083Z,1516414119.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:39.459Z,1516414119.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:39.859Z,1516414119.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:40.263Z,1516414120.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:40.667Z,1516414120.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:41.060Z,1516414121.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:41.460Z,1516414121.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:41.865Z,1516414121.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:42.264Z,1516414122.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:42.663Z,1516414122.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:43.075Z,1516414123.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:43.470Z,1516414123.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:43.874Z,1516414123.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:44.278Z,1516414124.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:44.655Z,1516414124.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:45.055Z,1516414125.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:45.462Z,1516414125.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:45.854Z,1516414125.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:46.255Z,1516414126.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:46.662Z,1516414126.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:47.070Z,1516414127.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:47.455Z,1516414127.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:47.859Z,1516414127.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:48.277Z,1516414128.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:48.674Z,1516414128.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:49.077Z,1516414129.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:49.481Z,1516414129.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:49.859Z,1516414129.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:50.259Z,1516414130.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:50.292Z,1516414130.292 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T02:03:50.2Z
2018-01-20T02:08:50.292Z,1516414130.292 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T02:08:50.292Z,1516414130.292 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T02:08:50.658Z,1516414130.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:51.112Z,1516414131.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:51.460Z,1516414131.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:54.746Z,1516414134.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:54.849Z,1516414134.849 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0132.lzma
2018-01-20T02:08:54.889Z,1516414134.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:55.252Z,1516414135.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:55.619Z,1516414135.619 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0132.lzma.bak
2018-01-20T02:08:55.619Z,1516414135.619 [DataOverHttps](INFO): SBD MOMSN=7725854
2018-01-20T02:08:55.661Z,1516414135.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:56.210Z,1516414136.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:56.461Z,1516414136.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:59.743Z,1516414139.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:08:59.878Z,1516414139.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:00.221Z,1516414140.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:00.627Z,1516414140.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:01.024Z,1516414141.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:01.420Z,1516414141.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:04.690Z,1516414144.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:04.794Z,1516414144.794 [DataOverHttps](INFO): Sending 401 bytes from file Logs/20180119T210901/Express0133.lzma
2018-01-20T02:09:04.824Z,1516414144.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:05.192Z,1516414145.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:05.570Z,1516414145.570 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0133.lzma.bak
2018-01-20T02:09:05.570Z,1516414145.570 [DataOverHttps](INFO): SBD MOMSN=7725856
2018-01-20T02:09:05.610Z,1516414145.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:06.109Z,1516414146.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:06.146Z,1516414146.146 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T02:09:06.146Z,1516414146.146 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T02:09:06.146Z,1516414146.146 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T02:09:06.396Z,1516414146.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:09.676Z,1516414149.676 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T02:09:09.693Z,1516414149.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:09.821Z,1516414149.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:10.219Z,1516414150.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:10.614Z,1516414150.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:11.015Z,1516414151.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:11.418Z,1516414151.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:11.820Z,1516414151.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:12.220Z,1516414152.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:12.618Z,1516414152.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:13.017Z,1516414153.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:13.415Z,1516414153.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:13.813Z,1516414153.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:14.222Z,1516414154.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:14.619Z,1516414154.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:15.016Z,1516414155.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:15.414Z,1516414155.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:15.819Z,1516414155.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:16.221Z,1516414156.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:16.615Z,1516414156.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:17.015Z,1516414157.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:17.418Z,1516414157.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:17.815Z,1516414157.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:18.219Z,1516414158.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:18.612Z,1516414158.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:19.010Z,1516414159.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:19.412Z,1516414159.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:19.809Z,1516414159.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:20.215Z,1516414160.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:20.244Z,1516414160.244 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T02:09:20.628Z,1516414160.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:21.012Z,1516414161.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:21.404Z,1516414161.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:21.807Z,1516414161.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:22.211Z,1516414162.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:22.614Z,1516414162.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:23.011Z,1516414163.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:23.418Z,1516414163.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:23.818Z,1516414163.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:24.210Z,1516414164.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:24.610Z,1516414164.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:25.011Z,1516414165.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:25.413Z,1516414165.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:25.817Z,1516414165.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:26.211Z,1516414166.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:26.618Z,1516414166.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:27.022Z,1516414167.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:27.417Z,1516414167.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:27.818Z,1516414167.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:28.218Z,1516414168.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:28.618Z,1516414168.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:29.019Z,1516414169.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:29.419Z,1516414169.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:29.816Z,1516414169.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:30.222Z,1516414170.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:30.620Z,1516414170.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:31.017Z,1516414171.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:31.418Z,1516414171.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:31.818Z,1516414171.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:32.223Z,1516414172.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:32.621Z,1516414172.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:33.023Z,1516414173.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:33.419Z,1516414173.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:33.816Z,1516414173.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:34.215Z,1516414174.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:34.616Z,1516414174.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:35.022Z,1516414175.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:35.420Z,1516414175.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:35.815Z,1516414175.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:36.219Z,1516414176.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:36.606Z,1516414176.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:37.019Z,1516414177.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:37.025Z,1516414177.025 [PNI_TCM](ERROR): CRC does not match. Expected:0x18737 got:0x22043
2018-01-20T02:09:37.412Z,1516414177.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:37.827Z,1516414177.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:38.226Z,1516414178.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:38.623Z,1516414178.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:39.025Z,1516414179.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:39.410Z,1516414179.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:39.811Z,1516414179.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:40.198Z,1516414180.198 [NAL9602](INFO): Powering down
2018-01-20T02:09:40.242Z,1516414180.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:40.610Z,1516414180.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:41.015Z,1516414181.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:41.411Z,1516414181.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:41.809Z,1516414181.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:41.818Z,1516414181.818 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2018-01-20T02:09:42.213Z,1516414182.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:42.612Z,1516414182.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:43.008Z,1516414183.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:43.414Z,1516414183.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:43.820Z,1516414183.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:44.214Z,1516414184.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:44.615Z,1516414184.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:45.012Z,1516414185.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:45.410Z,1516414185.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:45.417Z,1516414185.417 [PNI_TCM](ERROR): CRC does not match. Expected:0x9934 got:0x5954
2018-01-20T02:09:45.815Z,1516414185.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:46.215Z,1516414186.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:46.605Z,1516414186.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:47.022Z,1516414187.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:47.420Z,1516414187.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:47.813Z,1516414187.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:48.215Z,1516414188.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:48.619Z,1516414188.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:49.013Z,1516414189.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:49.422Z,1516414189.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:49.817Z,1516414189.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:50.216Z,1516414190.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:50.618Z,1516414190.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:51.023Z,1516414191.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:51.416Z,1516414191.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:51.819Z,1516414191.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:52.216Z,1516414192.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:52.607Z,1516414192.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:53.023Z,1516414193.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:53.411Z,1516414193.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:53.817Z,1516414193.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:54.211Z,1516414194.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:54.611Z,1516414194.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:55.008Z,1516414195.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:55.409Z,1516414195.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:55.811Z,1516414195.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:56.211Z,1516414196.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:56.614Z,1516414196.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:57.017Z,1516414197.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:57.416Z,1516414197.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:57.814Z,1516414197.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:58.217Z,1516414198.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:58.615Z,1516414198.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:59.014Z,1516414199.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:59.417Z,1516414199.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:09:59.814Z,1516414199.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:00.224Z,1516414200.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:00.617Z,1516414200.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:01.014Z,1516414201.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:01.414Z,1516414201.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:01.817Z,1516414201.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:02.214Z,1516414202.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:02.614Z,1516414202.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:03.013Z,1516414203.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:03.419Z,1516414203.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:03.807Z,1516414203.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:04.214Z,1516414204.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:04.607Z,1516414204.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:05.008Z,1516414205.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:05.423Z,1516414205.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:05.807Z,1516414205.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:06.207Z,1516414206.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:06.624Z,1516414206.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:09.892Z,1516414209.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:10.022Z,1516414210.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:10.389Z,1516414210.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:10.790Z,1516414210.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:11.187Z,1516414211.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:11.593Z,1516414211.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:11.986Z,1516414211.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:12.387Z,1516414212.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:12.785Z,1516414212.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:13.195Z,1516414213.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:13.588Z,1516414213.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:13.991Z,1516414213.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:14.387Z,1516414214.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:14.788Z,1516414214.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:15.189Z,1516414215.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:15.586Z,1516414215.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:15.991Z,1516414215.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:16.390Z,1516414216.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:16.786Z,1516414216.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:17.187Z,1516414217.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:17.589Z,1516414217.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:17.986Z,1516414217.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:18.386Z,1516414218.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:18.800Z,1516414218.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:19.186Z,1516414219.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:19.576Z,1516414219.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:19.995Z,1516414219.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:20.386Z,1516414220.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:20.786Z,1516414220.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:21.185Z,1516414221.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:21.595Z,1516414221.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:21.995Z,1516414221.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:22.386Z,1516414222.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:22.795Z,1516414222.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:23.179Z,1516414223.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:23.598Z,1516414223.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:23.979Z,1516414223.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:24.379Z,1516414224.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:24.786Z,1516414224.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:25.179Z,1516414225.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:25.576Z,1516414225.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:25.983Z,1516414225.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:26.379Z,1516414226.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:26.780Z,1516414226.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:27.183Z,1516414227.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:27.579Z,1516414227.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:27.980Z,1516414227.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:28.387Z,1516414228.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:28.787Z,1516414228.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:29.187Z,1516414229.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:29.587Z,1516414229.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:29.991Z,1516414229.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:30.383Z,1516414230.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:30.790Z,1516414230.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:31.186Z,1516414231.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:31.586Z,1516414231.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:31.988Z,1516414231.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:32.392Z,1516414232.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:32.782Z,1516414232.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:33.196Z,1516414233.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:33.586Z,1516414233.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:33.995Z,1516414233.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:34.389Z,1516414234.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:34.786Z,1516414234.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:35.194Z,1516414235.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:35.589Z,1516414235.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:36.011Z,1516414236.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:36.376Z,1516414236.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:36.783Z,1516414236.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:37.183Z,1516414237.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:37.579Z,1516414237.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:37.983Z,1516414237.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:38.379Z,1516414238.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:38.780Z,1516414238.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:39.183Z,1516414239.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:39.587Z,1516414239.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:39.987Z,1516414239.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:40.382Z,1516414240.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:40.778Z,1516414240.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:41.179Z,1516414241.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:41.587Z,1516414241.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:41.987Z,1516414241.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:42.381Z,1516414242.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:42.784Z,1516414242.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:43.183Z,1516414243.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:43.576Z,1516414243.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:43.983Z,1516414243.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:44.383Z,1516414244.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:44.783Z,1516414244.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:45.195Z,1516414245.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:45.586Z,1516414245.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:45.993Z,1516414245.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:46.392Z,1516414246.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:46.787Z,1516414246.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:47.188Z,1516414247.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:47.600Z,1516414247.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:48.001Z,1516414248.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:48.380Z,1516414248.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:48.796Z,1516414248.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:49.179Z,1516414249.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:49.581Z,1516414249.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:49.987Z,1516414249.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:50.379Z,1516414250.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:50.776Z,1516414250.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:51.178Z,1516414251.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:51.587Z,1516414251.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:51.983Z,1516414251.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:52.390Z,1516414252.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:52.790Z,1516414252.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:53.186Z,1516414253.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:53.586Z,1516414253.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:53.990Z,1516414253.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:54.386Z,1516414254.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:54.785Z,1516414254.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:55.186Z,1516414255.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:55.583Z,1516414255.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:55.603Z,1516414255.603 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:10:55.603Z,1516414255.603 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-01-20T02:10:55.603Z,1516414255.603 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:10:55.616Z,1516414255.616 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:10:55.990Z,1516414255.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:56.019Z,1516414256.019 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:10:56.019Z,1516414256.019 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-01-20T02:10:56.379Z,1516414256.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:56.416Z,1516414256.416 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:10:56.416Z,1516414256.416 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:10:56.416Z,1516414256.416 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:10:56.779Z,1516414256.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:57.186Z,1516414257.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:57.586Z,1516414257.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:57.980Z,1516414257.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:58.386Z,1516414258.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:58.786Z,1516414258.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:59.187Z,1516414259.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:59.583Z,1516414259.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:10:59.987Z,1516414259.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:00.380Z,1516414260.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:00.778Z,1516414260.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:01.186Z,1516414261.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:01.580Z,1516414261.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:01.982Z,1516414261.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:02.386Z,1516414262.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:02.776Z,1516414262.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:03.182Z,1516414263.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:03.587Z,1516414263.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:03.987Z,1516414263.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:04.388Z,1516414264.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:04.789Z,1516414264.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:05.186Z,1516414265.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:05.585Z,1516414265.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:05.986Z,1516414265.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:06.388Z,1516414266.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:06.788Z,1516414266.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:10.054Z,1516414270.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:10.176Z,1516414270.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:10.551Z,1516414270.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:10.951Z,1516414270.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:11.347Z,1516414271.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:11.756Z,1516414271.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:12.152Z,1516414272.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:12.548Z,1516414272.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:12.950Z,1516414272.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:13.351Z,1516414273.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:13.748Z,1516414273.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:14.160Z,1516414274.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:14.551Z,1516414274.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:14.940Z,1516414274.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:15.342Z,1516414275.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:15.755Z,1516414275.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:16.155Z,1516414276.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:16.543Z,1516414276.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:16.943Z,1516414276.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:17.340Z,1516414277.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:17.742Z,1516414277.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:18.143Z,1516414278.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:18.540Z,1516414278.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:18.950Z,1516414278.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:19.343Z,1516414279.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:19.740Z,1516414279.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:20.142Z,1516414280.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:20.550Z,1516414280.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:20.944Z,1516414280.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:21.350Z,1516414281.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:21.746Z,1516414281.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:22.150Z,1516414282.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:22.550Z,1516414282.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:22.952Z,1516414282.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:23.348Z,1516414283.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:23.756Z,1516414283.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:24.154Z,1516414284.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:24.549Z,1516414284.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:24.951Z,1516414284.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:25.353Z,1516414285.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:25.751Z,1516414285.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:26.146Z,1516414286.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:26.556Z,1516414286.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:26.948Z,1516414286.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:27.351Z,1516414287.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:27.744Z,1516414287.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:28.139Z,1516414288.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:28.559Z,1516414288.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:28.944Z,1516414288.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:29.340Z,1516414289.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:29.750Z,1516414289.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:30.151Z,1516414290.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:30.543Z,1516414290.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:30.950Z,1516414290.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:31.352Z,1516414291.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:31.747Z,1516414291.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:32.147Z,1516414292.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:32.549Z,1516414292.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:32.943Z,1516414292.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:33.351Z,1516414293.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:33.756Z,1516414293.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:34.152Z,1516414294.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:34.546Z,1516414294.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:34.949Z,1516414294.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:35.340Z,1516414295.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:35.759Z,1516414295.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:36.147Z,1516414296.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:36.539Z,1516414296.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:36.939Z,1516414296.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:37.348Z,1516414297.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:37.739Z,1516414297.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:38.138Z,1516414298.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:38.547Z,1516414298.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:38.950Z,1516414298.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:39.349Z,1516414299.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:39.751Z,1516414299.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:40.151Z,1516414300.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:40.549Z,1516414300.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:40.953Z,1516414300.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:41.347Z,1516414301.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:41.748Z,1516414301.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:42.149Z,1516414302.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:42.554Z,1516414302.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:42.958Z,1516414302.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:43.350Z,1516414303.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:43.754Z,1516414303.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:44.153Z,1516414304.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:44.546Z,1516414304.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:44.948Z,1516414304.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:45.356Z,1516414305.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:45.736Z,1516414305.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:46.147Z,1516414306.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:46.538Z,1516414306.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:46.940Z,1516414306.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:47.339Z,1516414307.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:47.750Z,1516414307.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:48.139Z,1516414308.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:48.539Z,1516414308.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:48.938Z,1516414308.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:49.339Z,1516414309.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:49.739Z,1516414309.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:50.155Z,1516414310.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:50.540Z,1516414310.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:50.955Z,1516414310.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:51.342Z,1516414311.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:51.740Z,1516414311.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:52.138Z,1516414312.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:52.543Z,1516414312.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:52.939Z,1516414312.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:53.339Z,1516414313.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:53.742Z,1516414313.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:54.148Z,1516414314.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:54.543Z,1516414314.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:54.950Z,1516414314.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:55.347Z,1516414315.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:55.746Z,1516414315.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:56.146Z,1516414316.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:56.548Z,1516414316.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:56.947Z,1516414316.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:57.346Z,1516414317.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:57.748Z,1516414317.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:58.147Z,1516414318.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:58.547Z,1516414318.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:58.948Z,1516414318.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:59.347Z,1516414319.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:11:59.746Z,1516414319.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:00.147Z,1516414320.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:00.551Z,1516414320.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:00.946Z,1516414320.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:01.348Z,1516414321.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:01.751Z,1516414321.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:02.146Z,1516414322.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:02.544Z,1516414322.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:02.953Z,1516414322.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:03.347Z,1516414323.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:03.747Z,1516414323.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:04.149Z,1516414324.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:04.560Z,1516414324.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:04.941Z,1516414324.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:05.356Z,1516414325.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:05.747Z,1516414325.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:06.139Z,1516414326.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:06.546Z,1516414326.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:06.956Z,1516414326.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:10.231Z,1516414330.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:10.357Z,1516414330.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:10.727Z,1516414330.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:11.123Z,1516414331.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:11.524Z,1516414331.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:11.923Z,1516414331.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:12.318Z,1516414332.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:12.722Z,1516414332.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:13.122Z,1516414333.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:13.522Z,1516414333.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:13.922Z,1516414333.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:14.326Z,1516414334.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:14.722Z,1516414334.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:15.122Z,1516414335.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:15.522Z,1516414335.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:15.922Z,1516414335.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:16.322Z,1516414336.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:16.722Z,1516414336.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:17.122Z,1516414337.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:17.526Z,1516414337.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:17.922Z,1516414337.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:18.323Z,1516414338.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:18.730Z,1516414338.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:19.127Z,1516414339.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:19.523Z,1516414339.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:19.925Z,1516414339.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:20.327Z,1516414340.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:20.725Z,1516414340.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:21.131Z,1516414341.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:21.525Z,1516414341.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:21.924Z,1516414341.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:22.326Z,1516414342.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:22.726Z,1516414342.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:23.122Z,1516414343.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:23.531Z,1516414343.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:23.925Z,1516414343.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:24.322Z,1516414344.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:24.725Z,1516414344.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:25.122Z,1516414345.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:25.516Z,1516414345.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:25.919Z,1516414345.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:26.323Z,1516414346.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:26.716Z,1516414346.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:27.124Z,1516414347.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:27.524Z,1516414347.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:27.922Z,1516414347.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:28.325Z,1516414348.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:28.725Z,1516414348.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:29.123Z,1516414349.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:29.525Z,1516414349.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:29.925Z,1516414349.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:30.328Z,1516414350.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:30.725Z,1516414350.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:31.125Z,1516414351.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:31.530Z,1516414351.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:31.930Z,1516414351.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:32.327Z,1516414352.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:32.723Z,1516414352.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:33.131Z,1516414353.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:33.527Z,1516414353.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:33.924Z,1516414353.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:34.326Z,1516414354.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:34.725Z,1516414354.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:35.124Z,1516414355.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:35.525Z,1516414355.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:35.925Z,1516414355.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:36.328Z,1516414356.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:36.724Z,1516414356.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:37.125Z,1516414357.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:37.524Z,1516414357.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:37.923Z,1516414357.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:38.322Z,1516414358.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:38.731Z,1516414358.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:39.122Z,1516414359.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:39.522Z,1516414359.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:39.930Z,1516414359.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:40.316Z,1516414360.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:40.723Z,1516414360.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:41.115Z,1516414361.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:41.519Z,1516414361.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:41.919Z,1516414361.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:42.319Z,1516414362.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:42.715Z,1516414362.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:43.131Z,1516414363.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:43.522Z,1516414363.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:43.920Z,1516414363.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:44.322Z,1516414364.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:44.722Z,1516414364.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:45.126Z,1516414365.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:45.525Z,1516414365.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:45.922Z,1516414365.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:46.326Z,1516414366.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:46.723Z,1516414366.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:47.122Z,1516414367.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:47.519Z,1516414367.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:47.921Z,1516414367.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:48.330Z,1516414368.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:48.724Z,1516414368.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:49.121Z,1516414369.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:49.530Z,1516414369.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:49.916Z,1516414369.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:50.322Z,1516414370.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:50.730Z,1516414370.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:51.130Z,1516414371.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:51.519Z,1516414371.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:51.915Z,1516414371.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:52.330Z,1516414372.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:52.719Z,1516414372.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:53.115Z,1516414373.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:53.512Z,1516414373.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:53.923Z,1516414373.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:54.315Z,1516414374.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:54.716Z,1516414374.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:55.119Z,1516414375.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:55.515Z,1516414375.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:55.915Z,1516414375.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:56.327Z,1516414376.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:56.726Z,1516414376.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:57.119Z,1516414377.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:57.524Z,1516414377.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:57.922Z,1516414377.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:58.322Z,1516414378.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:58.722Z,1516414378.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:59.128Z,1516414379.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:59.524Z,1516414379.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:12:59.925Z,1516414379.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:00.323Z,1516414380.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:00.725Z,1516414380.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:01.132Z,1516414381.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:01.522Z,1516414381.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:01.922Z,1516414381.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:02.321Z,1516414382.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:02.730Z,1516414382.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:03.130Z,1516414383.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:03.531Z,1516414383.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:03.922Z,1516414383.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:04.322Z,1516414384.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:04.722Z,1516414384.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:05.122Z,1516414385.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:05.524Z,1516414385.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:05.921Z,1516414385.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:06.330Z,1516414386.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:06.715Z,1516414386.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:07.122Z,1516414387.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:10.393Z,1516414390.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:10.513Z,1516414390.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:10.906Z,1516414390.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:10.914Z,1516414390.914 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2018-01-20T02:13:11.309Z,1516414391.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:11.695Z,1516414391.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:12.106Z,1516414392.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:12.506Z,1516414392.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:12.904Z,1516414392.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:13.303Z,1516414393.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:13.709Z,1516414393.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:14.091Z,1516414394.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:14.513Z,1516414394.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:14.895Z,1516414394.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:15.313Z,1516414395.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:15.713Z,1516414395.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:16.095Z,1516414396.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:16.492Z,1516414396.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:16.917Z,1516414396.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:17.295Z,1516414397.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:17.692Z,1516414397.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:18.095Z,1516414398.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:18.505Z,1516414398.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:18.892Z,1516414398.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:19.295Z,1516414399.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:19.705Z,1516414399.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:20.109Z,1516414400.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:20.506Z,1516414400.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:20.907Z,1516414400.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:21.309Z,1516414401.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:21.707Z,1516414401.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:22.108Z,1516414402.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:22.505Z,1516414402.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:22.904Z,1516414402.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:23.308Z,1516414403.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:23.692Z,1516414403.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:24.095Z,1516414404.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:24.504Z,1516414404.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:24.892Z,1516414404.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:25.304Z,1516414405.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:25.695Z,1516414405.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:26.095Z,1516414406.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:26.495Z,1516414406.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:26.896Z,1516414406.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:27.292Z,1516414407.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:27.706Z,1516414407.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:28.108Z,1516414408.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:28.496Z,1516414408.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:28.907Z,1516414408.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:29.308Z,1516414409.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:29.707Z,1516414409.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:30.104Z,1516414410.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:30.513Z,1516414410.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:30.895Z,1516414410.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:31.305Z,1516414411.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:31.695Z,1516414411.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:32.104Z,1516414412.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:32.495Z,1516414412.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:32.904Z,1516414412.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:33.295Z,1516414413.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:33.695Z,1516414413.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:34.108Z,1516414414.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:34.493Z,1516414414.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:34.907Z,1516414414.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:35.309Z,1516414415.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:35.691Z,1516414415.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:36.114Z,1516414416.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:36.510Z,1516414416.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:36.892Z,1516414416.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:37.295Z,1516414417.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:37.708Z,1516414417.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:38.108Z,1516414418.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:38.506Z,1516414418.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:38.908Z,1516414418.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:39.295Z,1516414419.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:39.708Z,1516414419.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:40.109Z,1516414420.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:40.504Z,1516414420.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:40.904Z,1516414420.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:41.304Z,1516414421.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:41.695Z,1516414421.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:42.104Z,1516414422.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:42.495Z,1516414422.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:42.907Z,1516414422.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:43.305Z,1516414423.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:43.709Z,1516414423.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:44.105Z,1516414424.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:44.507Z,1516414424.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:44.912Z,1516414424.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:45.312Z,1516414425.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:45.707Z,1516414425.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:46.095Z,1516414426.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:46.495Z,1516414426.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:46.894Z,1516414426.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:47.304Z,1516414427.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:47.692Z,1516414427.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:48.094Z,1516414428.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:48.504Z,1516414428.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:48.889Z,1516414428.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:49.305Z,1516414429.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:49.708Z,1516414429.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:50.108Z,1516414430.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:50.507Z,1516414430.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:50.907Z,1516414430.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:51.312Z,1516414431.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:51.708Z,1516414431.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:52.108Z,1516414432.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:52.504Z,1516414432.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:52.908Z,1516414432.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:53.309Z,1516414433.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:53.704Z,1516414433.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:54.108Z,1516414434.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:54.514Z,1516414434.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:54.888Z,1516414434.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:55.309Z,1516414435.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:55.709Z,1516414435.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:56.117Z,1516414436.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:56.509Z,1516414436.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:56.528Z,1516414436.528 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:13:56.528Z,1516414436.528 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-01-20T02:13:56.528Z,1516414436.528 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:13:56.540Z,1516414436.540 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:13:56.895Z,1516414436.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:56.961Z,1516414436.961 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:13:56.961Z,1516414436.961 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-01-20T02:13:57.295Z,1516414437.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:57.330Z,1516414437.330 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:13:57.330Z,1516414437.330 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:13:57.330Z,1516414437.330 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:13:57.721Z,1516414437.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:58.105Z,1516414438.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:58.492Z,1516414438.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:58.894Z,1516414438.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:59.305Z,1516414439.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:13:59.692Z,1516414439.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:00.105Z,1516414440.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:00.495Z,1516414440.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:00.895Z,1516414440.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:01.307Z,1516414441.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:01.714Z,1516414441.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:02.108Z,1516414442.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:02.515Z,1516414442.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:02.915Z,1516414442.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:03.313Z,1516414443.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:03.708Z,1516414443.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:04.104Z,1516414444.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:04.495Z,1516414444.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:04.895Z,1516414444.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:05.295Z,1516414445.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:05.692Z,1516414445.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:06.090Z,1516414446.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:06.495Z,1516414446.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:06.542Z,1516414446.542 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T02:14:06.542Z,1516414446.542 [Default:CheckIn:C.Wait] Stopped
2018-01-20T02:14:06.543Z,1516414446.543 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T02:14:06.543Z,1516414446.543 [Default:CheckIn:D] Running Loop=1
2018-01-20T02:14:06.891Z,1516414446.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:06.937Z,1516414446.937 [Default:CheckIn:D] Stopped
2018-01-20T02:14:06.937Z,1516414446.937 [Default:CheckIn:E] Running Loop=1
2018-01-20T02:14:07.296Z,1516414447.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:07.344Z,1516414447.344 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.505192 min 
2018-01-20T02:14:07.344Z,1516414447.344 [Default:CheckIn:E] Stopped
2018-01-20T02:14:07.344Z,1516414447.344 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T02:14:07.344Z,1516414447.344 [Default:CheckIn] Stopped
2018-01-20T02:14:07.344Z,1516414447.344 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T02:14:07.345Z,1516414447.345 [Default:CheckIn](INFO): Running loop #2
2018-01-20T02:14:07.345Z,1516414447.345 [Default:CheckIn] Running Loop=2
2018-01-20T02:14:07.345Z,1516414447.345 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T02:14:07.345Z,1516414447.345 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T02:14:10.604Z,1516414450.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:10.710Z,1516414450.710 [NAL9602](INFO): Powering up
2018-01-20T02:14:10.738Z,1516414450.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:11.095Z,1516414451.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:11.496Z,1516414451.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:11.886Z,1516414451.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:12.294Z,1516414452.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:12.698Z,1516414452.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:13.098Z,1516414453.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:13.490Z,1516414453.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:13.899Z,1516414453.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:14.291Z,1516414454.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:14.692Z,1516414454.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:15.100Z,1516414455.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:15.492Z,1516414455.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:15.886Z,1516414455.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:16.294Z,1516414456.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:16.690Z,1516414456.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:17.094Z,1516414457.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:17.499Z,1516414457.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:17.892Z,1516414457.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:18.291Z,1516414458.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:18.699Z,1516414458.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:19.090Z,1516414459.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:19.494Z,1516414459.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:19.893Z,1516414459.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:20.294Z,1516414460.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:20.694Z,1516414460.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:21.099Z,1516414461.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:21.505Z,1516414461.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:21.878Z,1516414461.878 [NAL9602](INFO): NAL9602 initialized
2018-01-20T02:14:21.910Z,1516414461.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:22.287Z,1516414462.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:22.666Z,1516414462.666 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T02:14:22.666Z,1516414462.666 [NAL9602] Data Fault, FailCount= 3
2018-01-20T02:14:22.666Z,1516414462.666 [NAL9602](ERROR): Data Fault
2018-01-20T02:14:22.684Z,1516414462.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:22.743Z,1516414462.743 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T02:14:23.070Z,1516414463.070 [NAL9602](INFO): Powering down
2018-01-20T02:14:23.087Z,1516414463.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:23.491Z,1516414463.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:23.883Z,1516414463.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:23.937Z,1516414463.937 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T02:14:23.937Z,1516414463.937 [NAL9602] No Fault, FailCount= 3
2018-01-20T02:14:24.294Z,1516414464.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:24.691Z,1516414464.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:25.094Z,1516414465.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:25.494Z,1516414465.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:25.896Z,1516414465.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:26.291Z,1516414466.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:26.696Z,1516414466.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:27.096Z,1516414467.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:27.495Z,1516414467.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:27.895Z,1516414467.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:28.292Z,1516414468.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:28.695Z,1516414468.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:29.091Z,1516414469.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:29.494Z,1516414469.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:29.892Z,1516414469.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:30.295Z,1516414470.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:30.693Z,1516414470.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:31.087Z,1516414471.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:31.488Z,1516414471.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:31.885Z,1516414471.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:32.291Z,1516414472.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:32.682Z,1516414472.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:33.092Z,1516414473.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:33.486Z,1516414473.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:33.890Z,1516414473.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:34.290Z,1516414474.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:34.685Z,1516414474.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:35.087Z,1516414475.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:35.490Z,1516414475.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:35.898Z,1516414475.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:36.295Z,1516414476.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:36.691Z,1516414476.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:37.094Z,1516414477.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:37.493Z,1516414477.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:37.890Z,1516414477.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:38.292Z,1516414478.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:38.699Z,1516414478.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:39.095Z,1516414479.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:39.493Z,1516414479.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:39.891Z,1516414479.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:40.298Z,1516414480.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:40.698Z,1516414480.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:41.093Z,1516414481.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:41.486Z,1516414481.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:41.887Z,1516414481.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:42.290Z,1516414482.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:42.686Z,1516414482.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:43.084Z,1516414483.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:43.487Z,1516414483.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:43.884Z,1516414483.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:44.282Z,1516414484.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:44.684Z,1516414484.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:44.690Z,1516414484.690 [PNI_TCM](ERROR): CRC does not match. Expected:0x57465 got:0x16050
2018-01-20T02:14:45.085Z,1516414485.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:45.490Z,1516414485.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:45.897Z,1516414485.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:46.293Z,1516414486.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:46.692Z,1516414486.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:47.094Z,1516414487.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:47.492Z,1516414487.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:47.891Z,1516414487.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:48.293Z,1516414488.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:48.687Z,1516414488.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:49.082Z,1516414489.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:49.483Z,1516414489.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:49.885Z,1516414489.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:50.288Z,1516414490.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:50.687Z,1516414490.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:51.083Z,1516414491.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:51.485Z,1516414491.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:51.888Z,1516414491.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:52.287Z,1516414492.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:52.702Z,1516414492.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:53.099Z,1516414493.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:53.466Z,1516414493.466 [NAL9602](INFO): Powering up NAL9602
2018-01-20T02:14:53.486Z,1516414493.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:53.902Z,1516414493.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:54.286Z,1516414494.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:54.681Z,1516414494.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:55.097Z,1516414495.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:55.487Z,1516414495.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:55.883Z,1516414495.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:56.297Z,1516414496.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:56.702Z,1516414496.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:57.084Z,1516414497.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:57.491Z,1516414497.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:57.888Z,1516414497.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:58.302Z,1516414498.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:58.691Z,1516414498.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:59.091Z,1516414499.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:59.111Z,1516414499.111 [PNI_TCM](ERROR): CRC does not match. Expected:0x53303 got:0x49305
2018-01-20T02:14:59.483Z,1516414499.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:59.889Z,1516414499.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:14:59.904Z,1516414499.904 [PNI_TCM](ERROR): CRC does not match. Expected:0x20560 got:0x6336
2018-01-20T02:15:00.287Z,1516414500.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:00.683Z,1516414500.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:01.087Z,1516414501.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:01.493Z,1516414501.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:01.884Z,1516414501.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:02.288Z,1516414502.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:02.696Z,1516414502.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:03.090Z,1516414503.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:03.496Z,1516414503.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:03.902Z,1516414503.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:04.279Z,1516414504.279 [NAL9602](INFO): NAL9602 initialized
2018-01-20T02:15:04.298Z,1516414504.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:04.702Z,1516414504.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:05.106Z,1516414505.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:05.502Z,1516414505.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:05.908Z,1516414505.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:06.307Z,1516414506.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:06.684Z,1516414506.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:07.102Z,1516414507.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:07.510Z,1516414507.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:10.778Z,1516414510.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:10.922Z,1516414510.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:11.271Z,1516414511.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:11.667Z,1516414511.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:12.070Z,1516414512.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:12.472Z,1516414512.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:12.877Z,1516414512.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:13.281Z,1516414513.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:13.671Z,1516414513.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:14.059Z,1516414514.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:14.463Z,1516414514.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:14.859Z,1516414514.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:15.255Z,1516414515.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:15.659Z,1516414515.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:16.079Z,1516414516.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:16.455Z,1516414516.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:16.887Z,1516414516.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:17.270Z,1516414517.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:17.670Z,1516414517.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:18.083Z,1516414518.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:18.470Z,1516414518.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:18.863Z,1516414518.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:19.259Z,1516414519.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:19.659Z,1516414519.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:20.059Z,1516414520.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:20.460Z,1516414520.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:20.863Z,1516414520.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:21.266Z,1516414521.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:21.677Z,1516414521.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:22.071Z,1516414522.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:22.483Z,1516414522.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:22.878Z,1516414522.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:23.289Z,1516414523.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:23.683Z,1516414523.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:24.064Z,1516414524.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:24.459Z,1516414524.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:24.855Z,1516414524.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:25.265Z,1516414525.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:25.666Z,1516414525.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:26.065Z,1516414526.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:26.467Z,1516414526.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:26.871Z,1516414526.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:27.270Z,1516414527.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:27.673Z,1516414527.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:28.078Z,1516414528.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:28.481Z,1516414528.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:28.867Z,1516414528.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:29.263Z,1516414529.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:29.659Z,1516414529.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:30.055Z,1516414530.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:30.480Z,1516414530.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:30.863Z,1516414530.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:31.263Z,1516414531.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:31.663Z,1516414531.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:32.059Z,1516414532.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:32.464Z,1516414532.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:32.870Z,1516414532.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:33.274Z,1516414533.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:33.677Z,1516414533.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:34.078Z,1516414534.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:34.459Z,1516414534.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:34.854Z,1516414534.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:35.279Z,1516414535.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:35.662Z,1516414535.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:36.063Z,1516414536.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:36.459Z,1516414536.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:36.863Z,1516414536.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:37.261Z,1516414537.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:37.666Z,1516414537.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:38.078Z,1516414538.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:38.470Z,1516414538.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:38.877Z,1516414538.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:39.277Z,1516414539.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:39.660Z,1516414539.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:40.067Z,1516414540.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:40.466Z,1516414540.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:40.861Z,1516414540.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:41.261Z,1516414541.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:41.672Z,1516414541.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:42.071Z,1516414542.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:42.462Z,1516414542.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:42.859Z,1516414542.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:43.270Z,1516414543.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:43.686Z,1516414543.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:44.070Z,1516414544.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:44.466Z,1516414544.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:44.863Z,1516414544.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:45.266Z,1516414545.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:45.659Z,1516414545.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:46.065Z,1516414546.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:46.468Z,1516414546.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:46.866Z,1516414546.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:47.268Z,1516414547.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:47.668Z,1516414547.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:48.072Z,1516414548.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:48.482Z,1516414548.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:48.878Z,1516414548.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:49.279Z,1516414549.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:49.678Z,1516414549.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:50.071Z,1516414550.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:50.455Z,1516414550.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:50.859Z,1516414550.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:51.266Z,1516414551.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:51.660Z,1516414551.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:52.074Z,1516414552.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:52.472Z,1516414552.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:52.865Z,1516414552.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:53.262Z,1516414553.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:53.683Z,1516414553.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:54.070Z,1516414554.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:54.473Z,1516414554.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:54.874Z,1516414554.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:55.263Z,1516414555.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:55.660Z,1516414555.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:56.071Z,1516414556.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:56.460Z,1516414556.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:56.876Z,1516414556.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:57.255Z,1516414557.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:57.656Z,1516414557.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:58.059Z,1516414558.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:58.472Z,1516414558.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:58.882Z,1516414558.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:59.278Z,1516414559.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:15:59.681Z,1516414559.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:00.082Z,1516414560.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:00.459Z,1516414560.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:00.861Z,1516414560.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:01.262Z,1516414561.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:01.659Z,1516414561.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:02.064Z,1516414562.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:02.458Z,1516414562.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:02.860Z,1516414562.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:03.260Z,1516414563.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:03.676Z,1516414563.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:04.074Z,1516414564.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:04.478Z,1516414564.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:04.870Z,1516414564.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:05.274Z,1516414565.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:05.673Z,1516414565.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:06.060Z,1516414566.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:06.460Z,1516414566.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:06.867Z,1516414566.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:07.265Z,1516414567.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:07.664Z,1516414567.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:10.970Z,1516414570.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:11.110Z,1516414571.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:11.461Z,1516414571.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:11.866Z,1516414571.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:12.246Z,1516414572.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:12.648Z,1516414572.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:13.043Z,1516414573.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:13.469Z,1516414573.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:13.847Z,1516414573.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:14.252Z,1516414574.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:14.645Z,1516414574.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:15.048Z,1516414575.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:15.448Z,1516414575.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:15.853Z,1516414575.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:16.266Z,1516414576.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:16.658Z,1516414576.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:17.053Z,1516414577.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:17.454Z,1516414577.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:17.856Z,1516414577.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:18.246Z,1516414578.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:18.650Z,1516414578.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:19.054Z,1516414579.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:19.450Z,1516414579.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:19.856Z,1516414579.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:20.244Z,1516414580.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:20.637Z,1516414580.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:21.067Z,1516414581.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:21.468Z,1516414581.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:21.859Z,1516414581.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:22.267Z,1516414582.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:22.647Z,1516414582.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:23.042Z,1516414583.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:23.444Z,1516414583.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:23.840Z,1516414583.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:24.252Z,1516414584.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:24.656Z,1516414584.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:25.052Z,1516414585.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:25.439Z,1516414585.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:25.848Z,1516414585.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:26.254Z,1516414586.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:26.658Z,1516414586.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:27.059Z,1516414587.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:27.456Z,1516414587.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:27.839Z,1516414587.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:28.246Z,1516414588.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:28.639Z,1516414588.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:29.038Z,1516414589.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:29.443Z,1516414589.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:29.839Z,1516414589.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:30.238Z,1516414590.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:30.643Z,1516414590.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:31.039Z,1516414591.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:31.461Z,1516414591.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:31.857Z,1516414591.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:32.260Z,1516414592.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:32.654Z,1516414592.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:33.043Z,1516414593.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:33.439Z,1516414593.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:33.840Z,1516414593.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:34.243Z,1516414594.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:34.643Z,1516414594.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:35.038Z,1516414595.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:35.447Z,1516414595.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:35.839Z,1516414595.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:36.247Z,1516414596.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:36.662Z,1516414596.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:37.063Z,1516414597.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:37.450Z,1516414597.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:37.866Z,1516414597.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:38.239Z,1516414598.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:38.638Z,1516414598.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:39.047Z,1516414599.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:39.443Z,1516414599.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:39.840Z,1516414599.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:40.247Z,1516414600.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:40.651Z,1516414600.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:41.044Z,1516414601.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:41.447Z,1516414601.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:41.866Z,1516414601.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:42.254Z,1516414602.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:42.658Z,1516414602.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:43.058Z,1516414603.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:43.449Z,1516414603.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:43.852Z,1516414603.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:44.253Z,1516414604.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:44.642Z,1516414604.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:45.046Z,1516414605.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:45.457Z,1516414605.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:45.840Z,1516414605.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:46.243Z,1516414606.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:46.643Z,1516414606.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:47.058Z,1516414607.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:47.468Z,1516414607.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:47.861Z,1516414607.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:48.258Z,1516414608.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:48.643Z,1516414608.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:49.043Z,1516414609.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:49.440Z,1516414609.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:49.847Z,1516414609.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:50.243Z,1516414610.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:50.640Z,1516414610.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:51.043Z,1516414611.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:51.443Z,1516414611.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:51.839Z,1516414611.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:52.254Z,1516414612.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:52.654Z,1516414612.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:53.050Z,1516414613.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:53.454Z,1516414613.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:53.843Z,1516414613.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:54.250Z,1516414614.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:54.650Z,1516414614.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:55.048Z,1516414615.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:55.452Z,1516414615.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:55.851Z,1516414615.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:56.252Z,1516414616.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:56.642Z,1516414616.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:57.050Z,1516414617.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:57.457Z,1516414617.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:57.480Z,1516414617.480 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:16:57.480Z,1516414617.480 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-01-20T02:16:57.481Z,1516414617.481 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:16:57.517Z,1516414617.517 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:16:57.862Z,1516414617.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:57.892Z,1516414617.892 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:16:57.893Z,1516414617.893 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-01-20T02:16:58.266Z,1516414618.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:58.284Z,1516414618.284 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:16:58.285Z,1516414618.285 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:16:58.285Z,1516414618.285 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:16:58.662Z,1516414618.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:59.040Z,1516414619.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:59.443Z,1516414619.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:16:59.844Z,1516414619.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:00.240Z,1516414620.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:00.652Z,1516414620.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:01.049Z,1516414621.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:01.450Z,1516414621.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:01.850Z,1516414621.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:02.249Z,1516414622.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:02.659Z,1516414622.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:03.064Z,1516414623.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:03.468Z,1516414623.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:03.858Z,1516414623.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:04.243Z,1516414624.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:04.647Z,1516414624.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:05.038Z,1516414625.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:05.443Z,1516414625.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:05.843Z,1516414625.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:06.239Z,1516414626.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:06.647Z,1516414626.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:07.051Z,1516414627.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:07.449Z,1516414627.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:07.859Z,1516414627.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:11.126Z,1516414631.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:11.266Z,1516414631.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:11.622Z,1516414631.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:12.009Z,1516414632.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:12.411Z,1516414632.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:12.807Z,1516414632.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:13.206Z,1516414633.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:13.605Z,1516414633.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:14.011Z,1516414634.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:14.400Z,1516414634.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:14.800Z,1516414634.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:15.202Z,1516414635.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:15.618Z,1516414635.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:16.018Z,1516414636.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:16.434Z,1516414636.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:16.815Z,1516414636.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:17.200Z,1516414637.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:17.609Z,1516414637.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:18.003Z,1516414638.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:18.398Z,1516414638.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:18.806Z,1516414638.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:19.207Z,1516414639.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:19.602Z,1516414639.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:20.016Z,1516414640.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:20.404Z,1516414640.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:20.813Z,1516414640.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:21.216Z,1516414641.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:21.615Z,1516414641.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:22.010Z,1516414642.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:22.399Z,1516414642.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:22.803Z,1516414642.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:23.195Z,1516414643.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:23.599Z,1516414643.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:23.995Z,1516414643.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:24.402Z,1516414644.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:24.799Z,1516414644.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:25.199Z,1516414645.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:25.595Z,1516414645.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:26.022Z,1516414646.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:26.406Z,1516414646.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:26.806Z,1516414646.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:27.210Z,1516414647.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:27.595Z,1516414647.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:28.003Z,1516414648.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:28.399Z,1516414648.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:28.799Z,1516414648.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:29.203Z,1516414649.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:29.599Z,1516414649.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:29.999Z,1516414649.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:30.403Z,1516414650.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:30.799Z,1516414650.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:31.206Z,1516414651.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:31.610Z,1516414651.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:32.010Z,1516414652.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:32.410Z,1516414652.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:32.795Z,1516414652.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:33.203Z,1516414653.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:33.595Z,1516414653.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:34.003Z,1516414654.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:34.399Z,1516414654.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:34.805Z,1516414654.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:35.207Z,1516414655.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:35.607Z,1516414655.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:36.008Z,1516414656.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:36.421Z,1516414656.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:36.826Z,1516414656.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:37.210Z,1516414657.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:37.613Z,1516414657.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:38.012Z,1516414658.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:38.403Z,1516414658.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:38.807Z,1516414658.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:39.207Z,1516414659.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:39.604Z,1516414659.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:40.011Z,1516414660.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:40.407Z,1516414660.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:40.805Z,1516414660.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:41.207Z,1516414661.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:41.618Z,1516414661.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:42.014Z,1516414662.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:42.421Z,1516414662.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:42.818Z,1516414662.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:43.195Z,1516414663.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:43.602Z,1516414663.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:44.002Z,1516414664.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:44.395Z,1516414664.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:44.810Z,1516414664.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:45.198Z,1516414665.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:45.595Z,1516414665.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:45.999Z,1516414665.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:46.402Z,1516414666.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:46.817Z,1516414666.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:47.222Z,1516414667.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:47.618Z,1516414667.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:48.006Z,1516414668.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:48.403Z,1516414668.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:48.798Z,1516414668.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:49.199Z,1516414669.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:49.603Z,1516414669.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:49.998Z,1516414669.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:50.407Z,1516414670.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:50.807Z,1516414670.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:51.205Z,1516414671.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:51.606Z,1516414671.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:52.018Z,1516414672.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:52.422Z,1516414672.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:52.822Z,1516414672.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:53.218Z,1516414673.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:53.610Z,1516414673.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:54.014Z,1516414674.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:54.412Z,1516414674.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:54.808Z,1516414674.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:55.205Z,1516414675.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:55.598Z,1516414675.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:56.008Z,1516414676.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:56.403Z,1516414676.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:56.798Z,1516414676.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:57.213Z,1516414677.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:57.615Z,1516414677.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:58.017Z,1516414678.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:58.418Z,1516414678.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:58.795Z,1516414678.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:59.194Z,1516414679.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:59.599Z,1516414679.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:17:59.995Z,1516414679.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:00.404Z,1516414680.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:00.811Z,1516414680.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:01.211Z,1516414681.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:01.599Z,1516414681.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:01.999Z,1516414681.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:02.422Z,1516414682.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:02.810Z,1516414682.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:03.222Z,1516414683.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:03.622Z,1516414683.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:04.008Z,1516414684.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:04.406Z,1516414684.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:04.804Z,1516414684.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:05.198Z,1516414685.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:05.610Z,1516414685.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:06.004Z,1516414686.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:06.398Z,1516414686.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:06.805Z,1516414686.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:07.211Z,1516414687.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:07.611Z,1516414687.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:08.019Z,1516414688.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:11.290Z,1516414691.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:11.431Z,1516414691.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:11.798Z,1516414691.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:12.203Z,1516414692.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:12.619Z,1516414692.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:13.008Z,1516414693.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:13.407Z,1516414693.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:13.803Z,1516414693.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:14.195Z,1516414694.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:14.596Z,1516414694.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:14.982Z,1516414694.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:15.395Z,1516414695.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:15.792Z,1516414695.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:16.190Z,1516414696.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:16.590Z,1516414696.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:16.994Z,1516414696.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:17.390Z,1516414697.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:17.811Z,1516414697.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:18.212Z,1516414698.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:18.612Z,1516414698.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:19.008Z,1516414699.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:19.389Z,1516414699.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:19.789Z,1516414699.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:20.190Z,1516414700.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:20.594Z,1516414700.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:20.996Z,1516414700.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:21.397Z,1516414701.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:21.804Z,1516414701.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:22.189Z,1516414702.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:22.618Z,1516414702.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:22.999Z,1516414702.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:23.407Z,1516414703.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:23.422Z,1516414703.422 [PNI_TCM](ERROR): CRC does not match. Expected:0x693 got:0x19369
2018-01-20T02:18:23.808Z,1516414703.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:24.198Z,1516414704.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:24.590Z,1516414704.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:24.996Z,1516414704.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:25.392Z,1516414705.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:25.786Z,1516414705.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:26.198Z,1516414706.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:26.591Z,1516414706.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:26.986Z,1516414706.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:27.399Z,1516414707.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:27.802Z,1516414707.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:28.206Z,1516414708.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:28.590Z,1516414708.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:28.998Z,1516414708.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:29.383Z,1516414709.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:29.812Z,1516414709.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:30.208Z,1516414710.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:30.589Z,1516414710.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:30.994Z,1516414710.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:31.408Z,1516414711.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:31.794Z,1516414711.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:32.189Z,1516414712.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:32.589Z,1516414712.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:32.990Z,1516414712.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:33.415Z,1516414713.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:33.798Z,1516414713.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:34.198Z,1516414714.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:34.603Z,1516414714.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:34.989Z,1516414714.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:35.389Z,1516414715.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:35.793Z,1516414715.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:36.189Z,1516414716.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:36.594Z,1516414716.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:36.997Z,1516414716.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:37.422Z,1516414717.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:37.798Z,1516414717.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:38.189Z,1516414718.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:38.600Z,1516414718.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:39.010Z,1516414719.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:39.389Z,1516414719.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:39.822Z,1516414719.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:40.197Z,1516414720.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:40.597Z,1516414720.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:40.997Z,1516414720.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:41.394Z,1516414721.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:41.796Z,1516414721.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:42.197Z,1516414722.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:42.600Z,1516414722.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:43.000Z,1516414723.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:43.393Z,1516414723.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:43.789Z,1516414723.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:44.189Z,1516414724.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:44.589Z,1516414724.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:44.989Z,1516414724.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:45.389Z,1516414725.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:45.803Z,1516414725.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:46.191Z,1516414726.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:46.588Z,1516414726.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:46.983Z,1516414726.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:47.387Z,1516414727.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:47.796Z,1516414727.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:48.195Z,1516414728.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:48.594Z,1516414728.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:48.997Z,1516414728.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:49.393Z,1516414729.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:49.788Z,1516414729.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:50.201Z,1516414730.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:50.594Z,1516414730.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:50.992Z,1516414730.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:51.402Z,1516414731.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:51.808Z,1516414731.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:52.188Z,1516414732.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:52.591Z,1516414732.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:52.984Z,1516414732.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:53.383Z,1516414733.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:53.792Z,1516414733.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:54.187Z,1516414734.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:54.584Z,1516414734.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:54.987Z,1516414734.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:55.390Z,1516414735.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:55.802Z,1516414735.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:56.198Z,1516414736.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:56.583Z,1516414736.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:56.984Z,1516414736.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:57.395Z,1516414737.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:57.788Z,1516414737.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:58.199Z,1516414738.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:58.596Z,1516414738.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:58.995Z,1516414738.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:59.389Z,1516414739.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:18:59.798Z,1516414739.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:00.202Z,1516414740.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:00.598Z,1516414740.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:01.004Z,1516414741.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:01.410Z,1516414741.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:01.787Z,1516414741.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:02.187Z,1516414742.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:02.583Z,1516414742.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:02.980Z,1516414742.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:03.387Z,1516414743.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:03.783Z,1516414743.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:04.191Z,1516414744.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:04.587Z,1516414744.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:05.007Z,1516414745.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:05.402Z,1516414745.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:05.801Z,1516414745.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:06.203Z,1516414746.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:06.583Z,1516414746.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:06.987Z,1516414746.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:07.383Z,1516414747.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:07.426Z,1516414747.426 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T02:14:07.3Z
2018-01-20T02:19:07.426Z,1516414747.426 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T02:19:07.427Z,1516414747.427 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T02:19:07.785Z,1516414747.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:08.245Z,1516414748.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:11.472Z,1516414751.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:11.565Z,1516414751.565 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0136.lzma
2018-01-20T02:19:11.600Z,1516414751.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:11.998Z,1516414751.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:12.359Z,1516414752.359 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0136.lzma.bak
2018-01-20T02:19:12.359Z,1516414752.359 [DataOverHttps](INFO): SBD MOMSN=7725883
2018-01-20T02:19:12.419Z,1516414752.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:12.910Z,1516414752.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:13.186Z,1516414753.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:16.533Z,1516414756.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:16.666Z,1516414756.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:17.046Z,1516414757.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:17.446Z,1516414757.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:17.834Z,1516414757.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:18.243Z,1516414758.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:21.602Z,1516414761.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:21.642Z,1516414761.642 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T02:19:21.723Z,1516414761.723 [DataOverHttps](INFO): Sending 214 bytes from file Logs/20180119T210901/Express0137.lzma
2018-01-20T02:19:21.758Z,1516414761.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:22.089Z,1516414762.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:22.451Z,1516414762.451 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0137.lzma.bak
2018-01-20T02:19:22.451Z,1516414762.451 [DataOverHttps](INFO): SBD MOMSN=7725885
2018-01-20T02:19:22.507Z,1516414762.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:22.991Z,1516414762.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:23.018Z,1516414763.018 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T02:19:23.018Z,1516414763.018 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T02:19:23.018Z,1516414763.018 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T02:19:23.278Z,1516414763.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:26.570Z,1516414766.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:26.717Z,1516414766.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:27.077Z,1516414767.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:27.465Z,1516414767.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:27.862Z,1516414767.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:28.258Z,1516414768.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:28.659Z,1516414768.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:29.056Z,1516414769.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:29.466Z,1516414769.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:29.847Z,1516414769.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:30.263Z,1516414770.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:30.654Z,1516414770.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:31.047Z,1516414771.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:31.454Z,1516414771.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:31.855Z,1516414771.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:32.247Z,1516414772.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:32.663Z,1516414772.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:33.054Z,1516414773.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:33.447Z,1516414773.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:33.860Z,1516414773.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:34.254Z,1516414774.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:34.665Z,1516414774.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:35.065Z,1516414775.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:35.451Z,1516414775.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:35.876Z,1516414775.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:36.275Z,1516414776.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:36.656Z,1516414776.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:37.056Z,1516414777.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:37.450Z,1516414777.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:37.852Z,1516414777.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:38.248Z,1516414778.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:38.649Z,1516414778.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:39.057Z,1516414779.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:39.457Z,1516414779.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:39.852Z,1516414779.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:40.266Z,1516414780.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:40.668Z,1516414780.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:41.047Z,1516414781.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:41.454Z,1516414781.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:41.847Z,1516414781.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:42.248Z,1516414782.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:42.654Z,1516414782.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:43.047Z,1516414783.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:43.447Z,1516414783.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:43.854Z,1516414783.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:44.264Z,1516414784.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:44.666Z,1516414784.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:45.070Z,1516414785.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:45.469Z,1516414785.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:45.862Z,1516414785.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:46.270Z,1516414786.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:46.647Z,1516414786.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:47.046Z,1516414787.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:47.454Z,1516414787.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:47.855Z,1516414787.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:48.251Z,1516414788.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:48.659Z,1516414788.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:49.059Z,1516414789.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:49.470Z,1516414789.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:49.870Z,1516414789.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:50.270Z,1516414790.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:50.662Z,1516414790.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:51.058Z,1516414791.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:51.455Z,1516414791.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:51.855Z,1516414791.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:52.259Z,1516414792.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:52.655Z,1516414792.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:53.045Z,1516414793.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:53.451Z,1516414793.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:53.854Z,1516414793.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:54.247Z,1516414794.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:54.666Z,1516414794.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:55.062Z,1516414795.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:55.445Z,1516414795.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:55.850Z,1516414795.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:56.247Z,1516414796.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:56.650Z,1516414796.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:57.058Z,1516414797.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:57.470Z,1516414797.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:57.866Z,1516414797.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:58.278Z,1516414798.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:58.316Z,1516414798.316 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:19:58.316Z,1516414798.316 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-01-20T02:19:58.316Z,1516414798.316 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:19:58.329Z,1516414798.329 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:19:58.662Z,1516414798.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:58.723Z,1516414798.723 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:19:58.723Z,1516414798.723 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-01-20T02:19:59.057Z,1516414799.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:59.075Z,1516414799.075 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:19:59.076Z,1516414799.076 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:19:59.076Z,1516414799.076 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:19:59.454Z,1516414799.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:19:59.857Z,1516414799.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:00.251Z,1516414800.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:00.657Z,1516414800.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:01.064Z,1516414801.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:01.456Z,1516414801.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:01.858Z,1516414801.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:02.267Z,1516414802.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:02.670Z,1516414802.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:03.054Z,1516414803.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:03.447Z,1516414803.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:03.848Z,1516414803.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:04.255Z,1516414804.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:04.654Z,1516414804.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:05.049Z,1516414805.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:05.456Z,1516414805.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:05.855Z,1516414805.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:06.258Z,1516414806.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:06.662Z,1516414806.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:07.066Z,1516414807.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:07.465Z,1516414807.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:07.834Z,1516414807.834 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T02:20:07.864Z,1516414807.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:08.255Z,1516414808.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:08.650Z,1516414808.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:09.054Z,1516414809.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:09.454Z,1516414809.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:09.856Z,1516414809.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:10.254Z,1516414810.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:10.654Z,1516414810.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:11.044Z,1516414811.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:11.454Z,1516414811.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:11.863Z,1516414811.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:12.262Z,1516414812.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:12.651Z,1516414812.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:13.047Z,1516414813.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:13.444Z,1516414813.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:13.851Z,1516414813.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:14.254Z,1516414814.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:14.648Z,1516414814.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:15.059Z,1516414815.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:15.451Z,1516414815.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:15.849Z,1516414815.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:16.256Z,1516414816.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:16.656Z,1516414816.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:17.050Z,1516414817.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:17.460Z,1516414817.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:17.854Z,1516414817.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:18.254Z,1516414818.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:18.658Z,1516414818.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:19.054Z,1516414819.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:19.454Z,1516414819.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:19.857Z,1516414819.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:20.254Z,1516414820.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:20.654Z,1516414820.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:21.058Z,1516414821.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:21.454Z,1516414821.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:21.855Z,1516414821.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:22.254Z,1516414822.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:22.654Z,1516414822.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:23.054Z,1516414823.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:23.455Z,1516414823.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:26.718Z,1516414826.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:26.835Z,1516414826.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:27.232Z,1516414827.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:27.635Z,1516414827.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:28.031Z,1516414828.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:28.431Z,1516414828.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:28.827Z,1516414828.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:29.228Z,1516414829.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:29.631Z,1516414829.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:30.024Z,1516414830.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:30.422Z,1516414830.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:30.830Z,1516414830.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:31.226Z,1516414831.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:31.622Z,1516414831.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:32.028Z,1516414832.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:32.431Z,1516414832.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:32.823Z,1516414832.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:33.242Z,1516414833.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:33.619Z,1516414833.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:34.021Z,1516414834.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:34.028Z,1516414834.028 [PNI_TCM](ERROR): CRC does not match. Expected:0x22053 got:0x35663
2018-01-20T02:20:34.426Z,1516414834.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:34.822Z,1516414834.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:35.216Z,1516414835.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:35.628Z,1516414835.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:36.021Z,1516414836.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:36.423Z,1516414836.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:36.832Z,1516414836.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:37.226Z,1516414837.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:37.628Z,1516414837.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:38.028Z,1516414838.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:38.405Z,1516414838.405 [NAL9602](INFO): Powering down
2018-01-20T02:20:38.450Z,1516414838.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:38.816Z,1516414838.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:39.221Z,1516414839.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:39.621Z,1516414839.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:40.022Z,1516414840.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:40.418Z,1516414840.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:40.825Z,1516414840.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:41.224Z,1516414841.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:41.618Z,1516414841.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:42.022Z,1516414842.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:42.416Z,1516414842.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:42.821Z,1516414842.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:42.827Z,1516414842.827 [PNI_TCM](ERROR): CRC does not match. Expected:0x44014 got:0x16821
2018-01-20T02:20:43.223Z,1516414843.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:43.616Z,1516414843.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:44.014Z,1516414844.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:44.425Z,1516414844.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:44.816Z,1516414844.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:45.219Z,1516414845.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:45.629Z,1516414845.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:46.028Z,1516414846.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:46.430Z,1516414846.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:46.826Z,1516414846.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:47.228Z,1516414847.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:47.636Z,1516414847.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:48.026Z,1516414848.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:48.419Z,1516414848.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:48.818Z,1516414848.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:49.225Z,1516414849.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:49.616Z,1516414849.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:50.026Z,1516414850.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:50.423Z,1516414850.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:50.819Z,1516414850.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:51.223Z,1516414851.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:51.625Z,1516414851.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:52.026Z,1516414852.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:52.430Z,1516414852.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:52.827Z,1516414852.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:53.230Z,1516414853.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:53.618Z,1516414853.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:54.019Z,1516414854.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:54.419Z,1516414854.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:54.822Z,1516414854.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:55.223Z,1516414855.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:55.616Z,1516414855.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:56.019Z,1516414856.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:56.427Z,1516414856.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:56.820Z,1516414856.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:57.227Z,1516414857.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:57.619Z,1516414857.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:58.023Z,1516414858.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:58.425Z,1516414858.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:58.831Z,1516414858.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:59.226Z,1516414859.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:20:59.619Z,1516414859.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:00.019Z,1516414860.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:00.419Z,1516414860.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:00.818Z,1516414860.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:01.231Z,1516414861.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:01.618Z,1516414861.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:02.019Z,1516414862.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:02.423Z,1516414862.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:02.819Z,1516414862.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:03.214Z,1516414863.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:03.623Z,1516414863.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:04.019Z,1516414864.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:04.418Z,1516414864.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:04.819Z,1516414864.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:05.219Z,1516414865.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:05.622Z,1516414865.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:06.023Z,1516414866.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:06.415Z,1516414866.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:06.819Z,1516414866.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:07.223Z,1516414867.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:07.619Z,1516414867.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:08.018Z,1516414868.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:08.423Z,1516414868.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:08.823Z,1516414868.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:09.219Z,1516414869.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:09.617Z,1516414869.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:10.020Z,1516414870.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:10.420Z,1516414870.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:10.817Z,1516414870.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:11.224Z,1516414871.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:11.628Z,1516414871.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:12.028Z,1516414872.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:12.422Z,1516414872.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:12.826Z,1516414872.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:13.226Z,1516414873.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:13.619Z,1516414873.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:14.019Z,1516414874.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:14.416Z,1516414874.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:14.819Z,1516414874.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:15.214Z,1516414875.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:15.616Z,1516414875.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:16.019Z,1516414876.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:16.423Z,1516414876.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:16.819Z,1516414876.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:17.230Z,1516414877.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:17.625Z,1516414877.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:18.027Z,1516414878.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:18.426Z,1516414878.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:18.822Z,1516414878.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:19.219Z,1516414879.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:19.619Z,1516414879.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:20.014Z,1516414880.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:20.419Z,1516414880.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:20.815Z,1516414880.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:21.218Z,1516414881.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:21.616Z,1516414881.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:22.019Z,1516414882.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:22.418Z,1516414882.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:22.816Z,1516414882.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:23.224Z,1516414883.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:23.631Z,1516414883.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:26.896Z,1516414886.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:27.028Z,1516414887.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:27.388Z,1516414887.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:27.783Z,1516414887.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:28.178Z,1516414888.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:28.583Z,1516414888.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:28.975Z,1516414888.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:29.382Z,1516414889.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:29.782Z,1516414889.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:30.178Z,1516414890.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:30.578Z,1516414890.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:30.992Z,1516414890.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:31.386Z,1516414891.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:31.771Z,1516414891.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:32.186Z,1516414892.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:32.572Z,1516414892.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:32.971Z,1516414892.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:33.382Z,1516414893.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:33.771Z,1516414893.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:34.171Z,1516414894.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:34.570Z,1516414894.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:34.971Z,1516414894.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:35.371Z,1516414895.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:35.774Z,1516414895.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:36.175Z,1516414896.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:36.575Z,1516414896.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:36.982Z,1516414896.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:37.383Z,1516414897.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:37.779Z,1516414897.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:38.180Z,1516414898.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:38.577Z,1516414898.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:38.978Z,1516414898.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:39.381Z,1516414899.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:39.778Z,1516414899.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:40.178Z,1516414900.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:40.581Z,1516414900.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:40.979Z,1516414900.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:41.379Z,1516414901.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:41.778Z,1516414901.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:42.168Z,1516414902.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:42.586Z,1516414902.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:42.978Z,1516414902.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:43.378Z,1516414903.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:43.778Z,1516414903.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:44.182Z,1516414904.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:44.580Z,1516414904.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:44.980Z,1516414904.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:45.383Z,1516414905.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:45.778Z,1516414905.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:46.183Z,1516414906.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:46.579Z,1516414906.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:46.980Z,1516414906.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:47.390Z,1516414907.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:47.781Z,1516414907.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:48.187Z,1516414908.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:48.587Z,1516414908.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:48.982Z,1516414908.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:49.383Z,1516414909.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:49.787Z,1516414909.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:50.182Z,1516414910.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:50.573Z,1516414910.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:50.988Z,1516414910.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:51.383Z,1516414911.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:51.771Z,1516414911.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:52.187Z,1516414912.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:52.578Z,1516414912.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:52.972Z,1516414912.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:53.375Z,1516414913.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:53.775Z,1516414913.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:54.175Z,1516414914.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:54.587Z,1516414914.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:55.000Z,1516414915.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:55.386Z,1516414915.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:55.787Z,1516414915.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:56.175Z,1516414916.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:56.572Z,1516414916.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:56.976Z,1516414916.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:57.395Z,1516414917.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:57.775Z,1516414917.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:58.175Z,1516414918.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:58.576Z,1516414918.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:58.975Z,1516414918.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:59.387Z,1516414919.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:21:59.775Z,1516414919.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:00.173Z,1516414920.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:00.591Z,1516414920.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:00.991Z,1516414920.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:01.375Z,1516414921.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:01.788Z,1516414921.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:02.175Z,1516414922.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:02.578Z,1516414922.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:02.972Z,1516414922.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:03.380Z,1516414923.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:03.777Z,1516414923.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:04.179Z,1516414924.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:04.583Z,1516414924.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:04.975Z,1516414924.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:05.382Z,1516414925.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:05.784Z,1516414925.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:06.175Z,1516414926.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:06.575Z,1516414926.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:06.978Z,1516414926.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:07.375Z,1516414927.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:07.775Z,1516414927.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:08.190Z,1516414928.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:08.587Z,1516414928.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:08.979Z,1516414928.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:09.387Z,1516414929.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:09.788Z,1516414929.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:10.181Z,1516414930.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:10.582Z,1516414930.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:10.982Z,1516414930.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:11.383Z,1516414931.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:11.785Z,1516414931.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:12.180Z,1516414932.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:12.581Z,1516414932.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:12.994Z,1516414932.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:13.384Z,1516414933.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:13.781Z,1516414933.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:14.187Z,1516414934.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:14.571Z,1516414934.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:14.972Z,1516414934.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:15.388Z,1516414935.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:15.772Z,1516414935.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:16.171Z,1516414936.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:16.576Z,1516414936.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:16.981Z,1516414936.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:17.375Z,1516414937.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:17.775Z,1516414937.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:18.181Z,1516414938.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:18.570Z,1516414938.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:18.976Z,1516414938.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:19.382Z,1516414939.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:19.768Z,1516414939.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:20.182Z,1516414940.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:20.189Z,1516414940.189 [PNI_TCM](ERROR): CRC does not match. Expected:0x7205 got:0x49913
2018-01-20T02:22:20.587Z,1516414940.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:20.975Z,1516414940.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:21.381Z,1516414941.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:21.785Z,1516414941.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:22.184Z,1516414942.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:22.578Z,1516414942.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:22.978Z,1516414942.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:23.381Z,1516414943.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:23.783Z,1516414943.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:27.059Z,1516414947.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:27.188Z,1516414947.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:27.534Z,1516414947.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:27.939Z,1516414947.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:28.334Z,1516414948.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:28.742Z,1516414948.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:29.139Z,1516414949.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:29.535Z,1516414949.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:29.933Z,1516414949.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:30.342Z,1516414950.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:30.730Z,1516414950.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:31.133Z,1516414951.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:31.534Z,1516414951.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:31.924Z,1516414951.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:32.343Z,1516414952.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:32.727Z,1516414952.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:33.128Z,1516414953.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:33.534Z,1516414953.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:33.927Z,1516414953.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:34.324Z,1516414954.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:34.731Z,1516414954.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:35.131Z,1516414955.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:35.531Z,1516414955.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:35.936Z,1516414955.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:36.331Z,1516414956.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:36.734Z,1516414956.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:37.136Z,1516414957.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:37.534Z,1516414957.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:37.932Z,1516414957.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:38.336Z,1516414958.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:38.734Z,1516414958.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:39.138Z,1516414959.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:39.539Z,1516414959.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:39.940Z,1516414959.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:40.330Z,1516414960.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:40.741Z,1516414960.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:41.142Z,1516414961.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:41.534Z,1516414961.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:41.944Z,1516414961.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:42.334Z,1516414962.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:42.734Z,1516414962.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:43.134Z,1516414963.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:43.543Z,1516414963.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:43.928Z,1516414963.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:44.350Z,1516414964.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:44.727Z,1516414964.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:45.128Z,1516414965.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:45.543Z,1516414965.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:45.927Z,1516414965.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:46.324Z,1516414966.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:46.731Z,1516414966.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:47.131Z,1516414967.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:47.528Z,1516414967.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:47.931Z,1516414967.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:48.334Z,1516414968.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:48.728Z,1516414968.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:49.131Z,1516414969.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:49.531Z,1516414969.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:49.927Z,1516414969.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:50.343Z,1516414970.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:50.734Z,1516414970.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:51.135Z,1516414971.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:51.534Z,1516414971.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:51.934Z,1516414971.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:52.336Z,1516414972.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:52.735Z,1516414972.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:53.142Z,1516414973.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:53.536Z,1516414973.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:53.934Z,1516414973.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:54.327Z,1516414974.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:54.727Z,1516414974.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:55.134Z,1516414975.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:55.527Z,1516414975.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:55.927Z,1516414975.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:56.331Z,1516414976.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:56.727Z,1516414976.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:57.131Z,1516414977.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:57.535Z,1516414977.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:57.936Z,1516414977.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:58.332Z,1516414978.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:58.741Z,1516414978.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:59.140Z,1516414979.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:59.159Z,1516414979.159 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:22:59.159Z,1516414979.159 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-01-20T02:22:59.159Z,1516414979.159 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:22:59.171Z,1516414979.171 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:22:59.535Z,1516414979.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:59.594Z,1516414979.594 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:22:59.594Z,1516414979.594 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-01-20T02:22:59.939Z,1516414979.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:22:59.958Z,1516414979.958 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:22:59.959Z,1516414979.959 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:22:59.959Z,1516414979.959 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:23:00.327Z,1516414980.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:00.728Z,1516414980.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:01.139Z,1516414981.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:01.527Z,1516414981.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:01.924Z,1516414981.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:02.326Z,1516414982.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:02.727Z,1516414982.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:03.128Z,1516414983.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:03.526Z,1516414983.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:03.927Z,1516414983.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:04.328Z,1516414984.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:04.730Z,1516414984.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:05.131Z,1516414985.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:05.528Z,1516414985.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:05.935Z,1516414985.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:06.339Z,1516414986.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:06.735Z,1516414986.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:07.134Z,1516414987.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:07.534Z,1516414987.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:07.935Z,1516414987.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:08.339Z,1516414988.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:08.739Z,1516414988.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:09.136Z,1516414989.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:09.539Z,1516414989.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:09.939Z,1516414989.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:10.331Z,1516414990.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:10.738Z,1516414990.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:11.138Z,1516414991.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:11.535Z,1516414991.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:11.938Z,1516414991.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:12.338Z,1516414992.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:12.761Z,1516414992.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:13.133Z,1516414993.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:13.531Z,1516414993.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:13.936Z,1516414993.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:14.368Z,1516414994.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:14.752Z,1516414994.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:15.136Z,1516414995.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:15.550Z,1516414995.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:15.940Z,1516414995.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:16.345Z,1516414996.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:16.741Z,1516414996.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:17.141Z,1516414997.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:17.540Z,1516414997.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:17.940Z,1516414997.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:18.341Z,1516414998.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:18.733Z,1516414998.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:19.133Z,1516414999.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:19.558Z,1516414999.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:19.933Z,1516414999.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:20.332Z,1516415000.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:20.732Z,1516415000.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:21.133Z,1516415001.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:21.539Z,1516415001.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:21.940Z,1516415001.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:22.340Z,1516415002.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:22.732Z,1516415002.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:23.133Z,1516415003.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:23.558Z,1516415003.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:23.931Z,1516415003.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:29.533Z,1516415009.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:29.710Z,1516415009.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:30.094Z,1516415010.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:30.481Z,1516415010.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:30.876Z,1516415010.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:31.284Z,1516415011.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:31.678Z,1516415011.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:32.080Z,1516415012.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:32.480Z,1516415012.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:32.881Z,1516415012.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:33.280Z,1516415013.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:33.672Z,1516415013.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:34.071Z,1516415014.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:34.472Z,1516415014.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:34.872Z,1516415014.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:35.302Z,1516415015.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:35.672Z,1516415015.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:36.096Z,1516415016.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:36.471Z,1516415016.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:36.868Z,1516415016.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:37.275Z,1516415017.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:37.675Z,1516415017.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:38.074Z,1516415018.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:38.479Z,1516415018.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:38.880Z,1516415018.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:39.271Z,1516415019.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:39.670Z,1516415019.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:40.079Z,1516415020.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:40.471Z,1516415020.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:40.874Z,1516415020.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:41.280Z,1516415021.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:41.679Z,1516415021.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:42.077Z,1516415022.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:42.477Z,1516415022.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:42.881Z,1516415022.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:43.277Z,1516415023.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:43.677Z,1516415023.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:44.082Z,1516415024.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:44.478Z,1516415024.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:44.877Z,1516415024.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:45.282Z,1516415025.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:45.679Z,1516415025.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:46.071Z,1516415026.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:46.467Z,1516415026.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:46.874Z,1516415026.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:47.275Z,1516415027.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:47.671Z,1516415027.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:48.071Z,1516415028.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:48.469Z,1516415028.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:48.871Z,1516415028.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:49.271Z,1516415029.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:49.674Z,1516415029.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:50.077Z,1516415030.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:50.475Z,1516415030.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:50.873Z,1516415030.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:51.275Z,1516415031.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:51.683Z,1516415031.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:52.082Z,1516415032.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:52.474Z,1516415032.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:52.879Z,1516415032.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:53.274Z,1516415033.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:53.675Z,1516415033.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:54.074Z,1516415034.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:54.478Z,1516415034.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:54.878Z,1516415034.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:55.278Z,1516415035.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:55.674Z,1516415035.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:56.074Z,1516415036.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:56.478Z,1516415036.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:56.875Z,1516415036.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:57.282Z,1516415037.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:57.677Z,1516415037.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:58.079Z,1516415038.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:58.475Z,1516415038.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:58.878Z,1516415038.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:59.282Z,1516415039.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:23:59.682Z,1516415039.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:00.074Z,1516415040.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:00.474Z,1516415040.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:00.874Z,1516415040.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:01.278Z,1516415041.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:01.676Z,1516415041.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:02.074Z,1516415042.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:02.473Z,1516415042.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:02.876Z,1516415042.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:03.278Z,1516415043.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:03.675Z,1516415043.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:04.082Z,1516415044.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:04.474Z,1516415044.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:04.873Z,1516415044.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:05.282Z,1516415045.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:05.671Z,1516415045.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:06.079Z,1516415046.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:06.472Z,1516415046.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:06.878Z,1516415046.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:07.279Z,1516415047.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:07.678Z,1516415047.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:08.079Z,1516415048.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:08.474Z,1516415048.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:08.876Z,1516415048.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:09.278Z,1516415049.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:09.679Z,1516415049.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:10.079Z,1516415050.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:10.484Z,1516415050.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:10.871Z,1516415050.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:11.275Z,1516415051.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:11.683Z,1516415051.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:12.091Z,1516415052.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:12.467Z,1516415052.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:12.871Z,1516415052.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:13.270Z,1516415053.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:13.668Z,1516415053.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:14.080Z,1516415054.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:14.476Z,1516415054.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:14.871Z,1516415054.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:15.280Z,1516415055.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:15.679Z,1516415055.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:16.076Z,1516415056.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:16.483Z,1516415056.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:16.882Z,1516415056.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:17.276Z,1516415057.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:17.683Z,1516415057.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:18.074Z,1516415058.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:18.468Z,1516415058.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:18.871Z,1516415058.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:19.271Z,1516415059.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:19.668Z,1516415059.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:20.076Z,1516415060.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:20.475Z,1516415060.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:20.875Z,1516415060.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:21.276Z,1516415061.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:21.676Z,1516415061.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:22.074Z,1516415062.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:22.476Z,1516415062.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:22.874Z,1516415062.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:23.279Z,1516415063.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:23.677Z,1516415063.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:23.701Z,1516415063.701 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T02:24:23.702Z,1516415063.702 [Default:CheckIn:C.Wait] Stopped
2018-01-20T02:24:23.702Z,1516415063.702 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T02:24:23.702Z,1516415063.702 [Default:CheckIn:D] Running Loop=1
2018-01-20T02:24:24.085Z,1516415064.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:24.106Z,1516415064.106 [Default:CheckIn:D] Stopped
2018-01-20T02:24:24.106Z,1516415064.106 [Default:CheckIn:E] Running Loop=1
2018-01-20T02:24:27.340Z,1516415067.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:27.362Z,1516415067.362 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 20.791337 min 
2018-01-20T02:24:27.362Z,1516415067.362 [Default:CheckIn:E] Stopped
2018-01-20T02:24:27.362Z,1516415067.362 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T02:24:27.362Z,1516415067.362 [Default:CheckIn] Stopped
2018-01-20T02:24:27.362Z,1516415067.362 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T02:24:27.362Z,1516415067.362 [Default:CheckIn](INFO): Running loop #3
2018-01-20T02:24:27.362Z,1516415067.362 [Default:CheckIn] Running Loop=3
2018-01-20T02:24:27.363Z,1516415067.363 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T02:24:27.363Z,1516415067.363 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T02:24:27.466Z,1516415067.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:27.814Z,1516415067.814 [NAL9602](INFO): Powering up
2018-01-20T02:24:27.846Z,1516415067.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:28.243Z,1516415068.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:28.643Z,1516415068.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:29.039Z,1516415069.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:29.442Z,1516415069.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:29.831Z,1516415069.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:30.231Z,1516415070.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:30.627Z,1516415070.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:31.031Z,1516415071.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:31.431Z,1516415071.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:31.824Z,1516415071.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:32.231Z,1516415072.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:32.631Z,1516415072.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:33.028Z,1516415073.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:33.435Z,1516415073.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:33.831Z,1516415073.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:34.231Z,1516415074.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:34.635Z,1516415074.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:35.043Z,1516415075.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:35.434Z,1516415075.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:35.835Z,1516415075.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:36.237Z,1516415076.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:36.634Z,1516415076.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:37.037Z,1516415077.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:37.437Z,1516415077.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:37.834Z,1516415077.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:38.237Z,1516415078.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:38.648Z,1516415078.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:39.018Z,1516415079.018 [NAL9602](INFO): NAL9602 initialized
2018-01-20T02:24:39.050Z,1516415079.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:39.434Z,1516415079.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:39.850Z,1516415079.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:40.245Z,1516415080.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:40.655Z,1516415080.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:41.031Z,1516415081.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:41.432Z,1516415081.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:41.831Z,1516415081.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:42.231Z,1516415082.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:42.631Z,1516415082.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:43.032Z,1516415083.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:43.435Z,1516415083.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:43.829Z,1516415083.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:44.228Z,1516415084.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:44.637Z,1516415084.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:45.026Z,1516415085.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:45.427Z,1516415085.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:45.831Z,1516415085.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:46.236Z,1516415086.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:46.631Z,1516415086.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:47.036Z,1516415087.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:47.431Z,1516415087.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:47.834Z,1516415087.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:48.248Z,1516415088.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:48.630Z,1516415088.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:49.027Z,1516415089.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:49.434Z,1516415089.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:49.826Z,1516415089.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:50.227Z,1516415090.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:50.631Z,1516415090.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:51.026Z,1516415091.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:51.427Z,1516415091.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:51.831Z,1516415091.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:52.227Z,1516415092.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:52.627Z,1516415092.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:53.034Z,1516415093.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:53.427Z,1516415093.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:53.827Z,1516415093.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:54.231Z,1516415094.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:54.626Z,1516415094.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:55.027Z,1516415095.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:55.431Z,1516415095.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:55.839Z,1516415095.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:56.240Z,1516415096.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:56.639Z,1516415096.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:57.030Z,1516415097.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:57.439Z,1516415097.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:57.834Z,1516415097.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:58.226Z,1516415098.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:58.642Z,1516415098.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:59.031Z,1516415099.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:59.426Z,1516415099.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:24:59.827Z,1516415099.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:00.231Z,1516415100.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:00.627Z,1516415100.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:01.035Z,1516415101.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:01.433Z,1516415101.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:01.837Z,1516415101.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:02.234Z,1516415102.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:02.638Z,1516415102.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:03.031Z,1516415103.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:03.435Z,1516415103.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:03.834Z,1516415103.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:04.226Z,1516415104.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:04.627Z,1516415104.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:05.030Z,1516415105.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:05.426Z,1516415105.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:05.827Z,1516415105.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:06.242Z,1516415106.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:06.626Z,1516415106.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:07.027Z,1516415107.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:07.431Z,1516415107.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:07.827Z,1516415107.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:08.235Z,1516415108.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:08.631Z,1516415108.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:09.027Z,1516415109.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:09.427Z,1516415109.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:09.831Z,1516415109.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:10.230Z,1516415110.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:10.627Z,1516415110.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:11.014Z,1516415111.014 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-01-20T02:25:11.097Z,1516415111.097 [NAL9602](FAULT): received: 
+CSQ:0

OK62, 2, 0, 0, 0

OK
2018-01-20T02:25:11.097Z,1516415111.097 [NAL9602] Data Fault, FailCount= 4
2018-01-20T02:25:11.097Z,1516415111.097 [NAL9602](ERROR): Data Fault
2018-01-20T02:25:11.120Z,1516415111.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:11.223Z,1516415111.223 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T02:25:11.414Z,1516415111.414 [NAL9602](INFO): Powering down
2018-01-20T02:25:11.432Z,1516415111.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:11.831Z,1516415111.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:12.231Z,1516415112.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:12.290Z,1516415112.290 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T02:25:12.290Z,1516415112.290 [NAL9602] No Fault, FailCount= 4
2018-01-20T02:25:12.631Z,1516415112.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:13.028Z,1516415113.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:13.443Z,1516415113.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:13.833Z,1516415113.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:14.234Z,1516415114.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:14.634Z,1516415114.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:15.034Z,1516415115.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:15.434Z,1516415115.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:15.833Z,1516415115.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:16.243Z,1516415116.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:16.624Z,1516415116.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:17.031Z,1516415117.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:17.426Z,1516415117.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:17.826Z,1516415117.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:18.231Z,1516415118.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:18.626Z,1516415118.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:19.026Z,1516415119.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:19.431Z,1516415119.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:19.826Z,1516415119.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:20.226Z,1516415120.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:20.631Z,1516415120.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:21.031Z,1516415121.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:21.434Z,1516415121.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:21.832Z,1516415121.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:22.236Z,1516415122.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:22.630Z,1516415122.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:23.036Z,1516415123.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:23.434Z,1516415123.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:23.835Z,1516415123.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:24.240Z,1516415124.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:27.545Z,1516415127.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:27.655Z,1516415127.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:28.027Z,1516415128.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:28.442Z,1516415128.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:28.823Z,1516415128.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:29.227Z,1516415129.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:29.623Z,1516415129.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:30.022Z,1516415130.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:30.447Z,1516415130.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:30.827Z,1516415130.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:31.238Z,1516415131.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:31.627Z,1516415131.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:32.023Z,1516415132.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:32.422Z,1516415132.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:32.831Z,1516415132.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:33.222Z,1516415133.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:33.622Z,1516415133.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:34.027Z,1516415134.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:34.423Z,1516415134.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:34.820Z,1516415134.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:35.226Z,1516415135.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:35.634Z,1516415135.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:36.034Z,1516415136.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:36.435Z,1516415136.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:36.827Z,1516415136.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:37.233Z,1516415137.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:37.636Z,1516415137.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:38.031Z,1516415138.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:38.432Z,1516415138.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:38.830Z,1516415138.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:39.235Z,1516415139.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:39.633Z,1516415139.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:40.039Z,1516415140.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:40.436Z,1516415140.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:40.832Z,1516415140.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:41.236Z,1516415141.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:41.606Z,1516415141.606 [NAL9602](INFO): Powering up NAL9602
2018-01-20T02:25:41.635Z,1516415141.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:42.023Z,1516415142.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:42.441Z,1516415142.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:42.822Z,1516415142.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:43.222Z,1516415143.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:43.648Z,1516415143.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:44.022Z,1516415144.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:44.423Z,1516415144.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:44.822Z,1516415144.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:45.222Z,1516415145.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:45.624Z,1516415145.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:46.026Z,1516415146.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:46.423Z,1516415146.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:46.824Z,1516415146.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:47.231Z,1516415147.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:47.627Z,1516415147.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:48.029Z,1516415148.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:48.430Z,1516415148.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:48.831Z,1516415148.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:49.235Z,1516415149.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:49.622Z,1516415149.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:50.023Z,1516415150.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:50.422Z,1516415150.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:50.834Z,1516415150.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:51.222Z,1516415151.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:51.620Z,1516415151.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:52.022Z,1516415152.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:52.450Z,1516415152.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:52.806Z,1516415152.806 [NAL9602](INFO): NAL9602 initialized
2018-01-20T02:25:52.823Z,1516415152.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:53.231Z,1516415153.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:53.614Z,1516415153.614 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T02:25:53.614Z,1516415153.614 [NAL9602] Data Fault, FailCount= 5
2018-01-20T02:25:53.614Z,1516415153.614 [NAL9602](ERROR): Data Fault
2018-01-20T02:25:53.631Z,1516415153.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:53.717Z,1516415153.717 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T02:25:53.718Z,1516415153.718 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-20T02:25:54.010Z,1516415154.010 [NAL9602](INFO): Powering down
2018-01-20T02:25:54.028Z,1516415154.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:54.098Z,1516415154.098 [CommandLine](FAULT): Scheduling is paused
2018-01-20T02:25:54.098Z,1516415154.098 [CBIT](INFO): Critical error at 20180120T022553
2018-01-20T02:25:54.427Z,1516415154.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:54.830Z,1516415154.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:55.227Z,1516415155.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:55.632Z,1516415155.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:56.029Z,1516415156.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:56.435Z,1516415156.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:56.830Z,1516415156.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:57.230Z,1516415157.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:57.631Z,1516415157.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:58.034Z,1516415158.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:58.433Z,1516415158.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:58.831Z,1516415158.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:59.230Z,1516415159.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:25:59.635Z,1516415159.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:00.029Z,1516415160.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:00.052Z,1516415160.052 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:26:00.053Z,1516415160.053 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-01-20T02:26:00.053Z,1516415160.053 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:26:00.065Z,1516415160.065 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:26:00.434Z,1516415160.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:00.463Z,1516415160.463 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:26:00.464Z,1516415160.464 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-01-20T02:26:00.834Z,1516415160.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:00.852Z,1516415160.852 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:26:00.853Z,1516415160.853 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:26:00.853Z,1516415160.853 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:26:01.222Z,1516415161.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:01.630Z,1516415161.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:02.031Z,1516415162.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:02.430Z,1516415162.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:02.826Z,1516415162.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:03.227Z,1516415163.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:03.622Z,1516415163.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:04.022Z,1516415164.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:04.431Z,1516415164.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:04.822Z,1516415164.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:05.226Z,1516415165.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:05.631Z,1516415165.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:06.023Z,1516415166.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:06.431Z,1516415166.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:06.831Z,1516415166.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:07.232Z,1516415167.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:07.635Z,1516415167.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:08.036Z,1516415168.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:08.429Z,1516415168.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:08.829Z,1516415168.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:09.233Z,1516415169.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:09.630Z,1516415169.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:10.034Z,1516415170.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:10.437Z,1516415170.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:10.830Z,1516415170.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:11.233Z,1516415171.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:11.633Z,1516415171.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:12.029Z,1516415172.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:12.437Z,1516415172.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:12.837Z,1516415172.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:13.230Z,1516415173.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:13.629Z,1516415173.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:14.033Z,1516415174.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:14.429Z,1516415174.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:14.833Z,1516415174.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:15.237Z,1516415175.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:15.630Z,1516415175.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:16.035Z,1516415176.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:16.438Z,1516415176.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:16.830Z,1516415176.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:17.230Z,1516415177.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:17.637Z,1516415177.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:18.030Z,1516415178.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:18.435Z,1516415178.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:18.830Z,1516415178.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:19.244Z,1516415179.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:19.630Z,1516415179.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:20.030Z,1516415180.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:20.439Z,1516415180.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:20.848Z,1516415180.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:21.228Z,1516415181.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:21.623Z,1516415181.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:22.027Z,1516415182.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:22.439Z,1516415182.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:22.822Z,1516415182.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:23.231Z,1516415183.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:23.624Z,1516415183.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:24.023Z,1516415184.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:24.431Z,1516415184.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:27.733Z,1516415187.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:27.862Z,1516415187.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:28.222Z,1516415188.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:28.623Z,1516415188.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:29.019Z,1516415189.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:29.418Z,1516415189.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:29.819Z,1516415189.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:30.218Z,1516415190.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:30.621Z,1516415190.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:31.021Z,1516415191.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:31.422Z,1516415191.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:31.821Z,1516415191.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:32.225Z,1516415192.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:32.622Z,1516415192.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:33.022Z,1516415193.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:33.426Z,1516415193.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:33.810Z,1516415193.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:34.225Z,1516415194.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:34.619Z,1516415194.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:35.014Z,1516415195.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:35.414Z,1516415195.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:35.819Z,1516415195.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:36.214Z,1516415196.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:36.614Z,1516415196.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:37.015Z,1516415197.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:37.415Z,1516415197.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:37.815Z,1516415197.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:38.219Z,1516415198.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:38.619Z,1516415198.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:39.019Z,1516415199.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:39.412Z,1516415199.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:39.820Z,1516415199.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:40.223Z,1516415200.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:40.621Z,1516415200.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:41.022Z,1516415201.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:41.421Z,1516415201.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:41.819Z,1516415201.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:42.219Z,1516415202.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:42.621Z,1516415202.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:43.012Z,1516415203.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:43.410Z,1516415203.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:43.823Z,1516415203.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:44.225Z,1516415204.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:44.614Z,1516415204.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:45.018Z,1516415205.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:45.419Z,1516415205.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:45.818Z,1516415205.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:46.222Z,1516415206.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:46.612Z,1516415206.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:47.012Z,1516415207.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:47.418Z,1516415207.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:47.810Z,1516415207.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:48.214Z,1516415208.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:48.623Z,1516415208.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:49.018Z,1516415209.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:49.422Z,1516415209.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:49.820Z,1516415209.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:50.219Z,1516415210.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:50.620Z,1516415210.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:51.023Z,1516415211.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:51.421Z,1516415211.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:51.819Z,1516415211.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:52.223Z,1516415212.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:52.621Z,1516415212.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:53.021Z,1516415213.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:53.434Z,1516415213.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:53.823Z,1516415213.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:54.212Z,1516415214.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:54.621Z,1516415214.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:55.010Z,1516415215.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:55.429Z,1516415215.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:55.815Z,1516415215.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:56.214Z,1516415216.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:56.629Z,1516415216.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:57.015Z,1516415217.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:57.420Z,1516415217.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:57.819Z,1516415217.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:58.215Z,1516415218.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:58.612Z,1516415218.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:59.016Z,1516415219.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:59.414Z,1516415219.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:26:59.810Z,1516415219.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:00.220Z,1516415220.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:00.616Z,1516415220.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:01.014Z,1516415221.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:01.415Z,1516415221.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:01.816Z,1516415221.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:02.220Z,1516415222.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:02.619Z,1516415222.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:03.019Z,1516415223.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:03.425Z,1516415223.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:03.826Z,1516415223.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:04.223Z,1516415224.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:04.610Z,1516415224.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:05.026Z,1516415225.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:05.420Z,1516415225.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:05.812Z,1516415225.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:06.226Z,1516415226.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:06.614Z,1516415226.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:07.011Z,1516415227.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:07.416Z,1516415227.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:07.814Z,1516415227.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:08.214Z,1516415228.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:08.616Z,1516415228.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:09.016Z,1516415229.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:09.410Z,1516415229.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:09.818Z,1516415229.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:10.215Z,1516415230.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:10.612Z,1516415230.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:10.619Z,1516415230.619 [PNI_TCM](ERROR): CRC does not match. Expected:0x15220 got:0x16821
2018-01-20T02:27:11.015Z,1516415231.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:11.414Z,1516415231.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:11.810Z,1516415231.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:12.219Z,1516415232.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:12.614Z,1516415232.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:13.018Z,1516415233.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:13.419Z,1516415233.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:13.825Z,1516415233.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:14.222Z,1516415234.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:14.616Z,1516415234.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:15.028Z,1516415235.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:15.422Z,1516415235.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:15.818Z,1516415235.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:16.222Z,1516415236.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:16.627Z,1516415236.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:17.012Z,1516415237.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:17.415Z,1516415237.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:17.811Z,1516415237.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:18.211Z,1516415238.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:18.615Z,1516415238.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:19.019Z,1516415239.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:19.419Z,1516415239.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:19.820Z,1516415239.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:20.218Z,1516415240.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:20.615Z,1516415240.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:21.017Z,1516415241.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:21.422Z,1516415241.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:21.808Z,1516415241.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:22.226Z,1516415242.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:22.614Z,1516415242.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:23.012Z,1516415243.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:23.414Z,1516415243.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:23.810Z,1516415243.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:24.219Z,1516415244.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:24.619Z,1516415244.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:27.900Z,1516415247.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:28.026Z,1516415248.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:28.373Z,1516415248.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:28.779Z,1516415248.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:29.161Z,1516415249.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:29.573Z,1516415249.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:29.980Z,1516415249.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:30.371Z,1516415250.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:30.771Z,1516415250.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:31.179Z,1516415251.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:31.560Z,1516415251.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:31.979Z,1516415251.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:32.363Z,1516415252.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:32.764Z,1516415252.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:33.167Z,1516415253.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:33.562Z,1516415253.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:33.964Z,1516415253.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:34.366Z,1516415254.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:34.770Z,1516415254.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:35.166Z,1516415255.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:35.578Z,1516415255.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:35.969Z,1516415255.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:36.375Z,1516415256.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:36.777Z,1516415256.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:37.170Z,1516415257.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:37.560Z,1516415257.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:37.966Z,1516415257.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:38.362Z,1516415258.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:38.762Z,1516415258.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:39.166Z,1516415259.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:39.562Z,1516415259.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:39.964Z,1516415259.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:40.366Z,1516415260.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:40.762Z,1516415260.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:41.163Z,1516415261.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:41.566Z,1516415261.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:41.962Z,1516415261.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:42.371Z,1516415262.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:42.770Z,1516415262.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:43.174Z,1516415263.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:43.567Z,1516415263.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:43.972Z,1516415263.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:44.370Z,1516415264.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:44.767Z,1516415264.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:45.173Z,1516415265.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:45.570Z,1516415265.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:45.977Z,1516415265.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:46.375Z,1516415266.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:46.770Z,1516415266.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:47.171Z,1516415267.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:47.570Z,1516415267.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:47.970Z,1516415267.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:48.370Z,1516415268.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:48.770Z,1516415268.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:49.177Z,1516415269.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:49.560Z,1516415269.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:49.978Z,1516415269.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:50.363Z,1516415270.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:50.760Z,1516415270.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:51.179Z,1516415271.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:51.563Z,1516415271.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:51.964Z,1516415271.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:52.387Z,1516415272.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:52.770Z,1516415272.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:53.163Z,1516415273.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:53.566Z,1516415273.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:53.617Z,1516415273.617 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T02:27:53.617Z,1516415273.617 [NAL9602] No Fault, FailCount= 5
2018-01-20T02:27:53.946Z,1516415273.946 [NAL9602](INFO): Powering up NAL9602
2018-01-20T02:27:53.964Z,1516415273.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:54.362Z,1516415274.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:54.771Z,1516415274.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:55.170Z,1516415275.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:55.570Z,1516415275.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:55.971Z,1516415275.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:56.368Z,1516415276.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:56.767Z,1516415276.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:57.170Z,1516415277.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:57.571Z,1516415277.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:57.972Z,1516415277.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:58.373Z,1516415278.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:58.770Z,1516415278.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:59.172Z,1516415279.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:59.570Z,1516415279.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:27:59.970Z,1516415279.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:00.377Z,1516415280.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:00.773Z,1516415280.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:01.170Z,1516415281.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:01.572Z,1516415281.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:01.970Z,1516415281.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:02.378Z,1516415282.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:02.772Z,1516415282.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:03.170Z,1516415283.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:03.570Z,1516415283.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:03.972Z,1516415283.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:04.398Z,1516415284.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:04.754Z,1516415284.754 [NAL9602](INFO): NAL9602 initialized
2018-01-20T02:28:04.786Z,1516415284.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:05.174Z,1516415285.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:05.587Z,1516415285.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:05.978Z,1516415285.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:06.386Z,1516415286.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:06.774Z,1516415286.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:07.174Z,1516415287.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:07.574Z,1516415287.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:07.979Z,1516415287.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:08.383Z,1516415288.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:08.787Z,1516415288.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:09.177Z,1516415289.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:09.562Z,1516415289.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:09.980Z,1516415289.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:10.385Z,1516415290.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:10.780Z,1516415290.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:11.164Z,1516415291.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:11.568Z,1516415291.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:11.984Z,1516415291.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:12.367Z,1516415292.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:12.792Z,1516415292.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:13.184Z,1516415293.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:13.587Z,1516415293.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:13.987Z,1516415293.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:14.362Z,1516415294.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:14.763Z,1516415294.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:15.175Z,1516415295.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:15.567Z,1516415295.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:15.963Z,1516415295.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:16.367Z,1516415296.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:16.770Z,1516415296.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:17.175Z,1516415297.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:17.572Z,1516415297.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:17.982Z,1516415297.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:18.382Z,1516415298.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:18.789Z,1516415298.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:19.185Z,1516415299.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:19.563Z,1516415299.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:19.977Z,1516415299.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:20.374Z,1516415300.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:20.774Z,1516415300.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:21.176Z,1516415301.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:21.579Z,1516415301.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:21.979Z,1516415301.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:22.375Z,1516415302.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:22.779Z,1516415302.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:23.182Z,1516415303.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:23.589Z,1516415303.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:23.987Z,1516415303.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:24.385Z,1516415304.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:24.774Z,1516415304.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:28.044Z,1516415308.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:28.171Z,1516415308.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:28.547Z,1516415308.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:28.951Z,1516415308.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:29.353Z,1516415309.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:29.743Z,1516415309.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:30.131Z,1516415310.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:30.527Z,1516415310.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:30.931Z,1516415310.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:31.327Z,1516415311.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:31.729Z,1516415311.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:32.131Z,1516415312.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:32.527Z,1516415312.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:32.925Z,1516415312.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:33.353Z,1516415313.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:33.737Z,1516415313.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:34.138Z,1516415314.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:34.550Z,1516415314.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:34.931Z,1516415314.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:35.334Z,1516415315.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:35.731Z,1516415315.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:36.135Z,1516415316.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:36.529Z,1516415316.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:36.931Z,1516415316.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:37.331Z,1516415317.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:37.731Z,1516415317.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:38.136Z,1516415318.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:38.538Z,1516415318.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:38.938Z,1516415318.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:39.337Z,1516415319.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:39.740Z,1516415319.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:40.133Z,1516415320.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:40.542Z,1516415320.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:40.934Z,1516415320.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:41.343Z,1516415321.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:41.758Z,1516415321.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:42.143Z,1516415322.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:42.528Z,1516415322.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:42.931Z,1516415322.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:43.335Z,1516415323.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:43.728Z,1516415323.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:44.135Z,1516415324.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:44.539Z,1516415324.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:44.929Z,1516415324.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:45.335Z,1516415325.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:45.732Z,1516415325.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:46.136Z,1516415326.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:46.531Z,1516415326.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:46.931Z,1516415326.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:47.331Z,1516415327.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:47.736Z,1516415327.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:48.137Z,1516415328.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:48.529Z,1516415328.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:48.946Z,1516415328.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:49.340Z,1516415329.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:49.730Z,1516415329.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:50.148Z,1516415330.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:50.555Z,1516415330.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:50.927Z,1516415330.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:51.331Z,1516415331.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:51.731Z,1516415331.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:52.127Z,1516415332.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:52.535Z,1516415332.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:52.935Z,1516415332.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:53.339Z,1516415333.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:53.735Z,1516415333.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:54.136Z,1516415334.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:54.554Z,1516415334.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:54.948Z,1516415334.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:55.340Z,1516415335.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:55.730Z,1516415335.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:56.143Z,1516415336.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:56.534Z,1516415336.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:56.926Z,1516415336.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:57.334Z,1516415337.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:57.734Z,1516415337.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:58.143Z,1516415338.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:58.531Z,1516415338.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:58.955Z,1516415338.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:59.349Z,1516415339.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:28:59.760Z,1516415339.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:00.150Z,1516415340.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:00.528Z,1516415340.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:00.935Z,1516415340.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:00.972Z,1516415340.972 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:29:00.972Z,1516415340.972 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-01-20T02:29:00.973Z,1516415340.973 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:29:00.985Z,1516415340.985 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:29:01.328Z,1516415341.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:01.391Z,1516415341.391 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:29:01.391Z,1516415341.391 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-01-20T02:29:01.732Z,1516415341.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:01.779Z,1516415341.779 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:29:01.779Z,1516415341.779 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:29:01.779Z,1516415341.779 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:29:02.132Z,1516415342.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:02.531Z,1516415342.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:02.940Z,1516415342.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:03.336Z,1516415343.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:03.739Z,1516415343.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:04.142Z,1516415344.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:04.546Z,1516415344.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:04.950Z,1516415344.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:05.353Z,1516415345.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:05.743Z,1516415345.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:06.128Z,1516415346.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:06.527Z,1516415346.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:06.932Z,1516415346.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:07.327Z,1516415347.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:07.726Z,1516415347.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:08.135Z,1516415348.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:08.527Z,1516415348.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:08.955Z,1516415348.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:09.358Z,1516415349.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:09.747Z,1516415349.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:10.154Z,1516415350.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:10.531Z,1516415350.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:10.927Z,1516415350.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:11.326Z,1516415351.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:11.734Z,1516415351.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:12.127Z,1516415352.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:12.527Z,1516415352.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:12.931Z,1516415352.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:13.331Z,1516415353.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:13.726Z,1516415353.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:14.155Z,1516415354.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:14.555Z,1516415354.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:14.938Z,1516415354.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:15.342Z,1516415355.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:15.727Z,1516415355.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:16.135Z,1516415356.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:16.535Z,1516415356.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:16.939Z,1516415356.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:17.331Z,1516415357.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:17.739Z,1516415357.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:18.135Z,1516415358.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:18.537Z,1516415358.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:18.940Z,1516415358.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:19.345Z,1516415359.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:19.746Z,1516415359.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:20.149Z,1516415360.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:20.544Z,1516415360.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:20.931Z,1516415360.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:21.335Z,1516415361.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:21.727Z,1516415361.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:21.780Z,1516415361.780 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T02:29:22.131Z,1516415362.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:22.531Z,1516415362.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:22.927Z,1516415362.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:23.335Z,1516415363.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:23.747Z,1516415363.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:24.148Z,1516415364.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:24.554Z,1516415364.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:24.951Z,1516415364.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:28.226Z,1516415368.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:28.265Z,1516415368.265 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T02:24:27.4Z
2018-01-20T02:29:28.265Z,1516415368.265 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T02:29:28.265Z,1516415368.265 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T02:29:28.362Z,1516415368.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:28.773Z,1516415368.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:29.125Z,1516415369.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:29.538Z,1516415369.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:29.926Z,1516415369.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:33.212Z,1516415373.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:33.310Z,1516415373.310 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180119T210901/Courier0140.lzma
2018-01-20T02:29:33.343Z,1516415373.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:33.687Z,1516415373.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:34.064Z,1516415374.064 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0140.lzma.bak
2018-01-20T02:29:34.064Z,1516415374.064 [DataOverHttps](INFO): SBD MOMSN=7725909
2018-01-20T02:29:34.092Z,1516415374.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:34.598Z,1516415374.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:34.898Z,1516415374.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:38.178Z,1516415378.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:38.308Z,1516415378.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:38.681Z,1516415378.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:39.085Z,1516415379.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:39.490Z,1516415379.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:39.893Z,1516415379.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:43.134Z,1516415383.134 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T02:29:43.151Z,1516415383.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:43.253Z,1516415383.253 [DataOverHttps](INFO): Sending 277 bytes from file Logs/20180119T210901/Express0141.lzma
2018-01-20T02:29:43.279Z,1516415383.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:43.658Z,1516415383.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:44.027Z,1516415384.027 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0141.lzma.bak
2018-01-20T02:29:44.027Z,1516415384.027 [DataOverHttps](INFO): SBD MOMSN=7725912
2018-01-20T02:29:44.073Z,1516415384.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:44.086Z,1516415384.086 [PNI_TCM](ERROR): CRC does not match. Expected:0x35226 got:0x3727
2018-01-20T02:29:44.555Z,1516415384.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:44.593Z,1516415384.593 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T02:29:44.594Z,1516415384.594 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T02:29:44.594Z,1516415384.594 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T02:29:44.859Z,1516415384.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:48.191Z,1516415388.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:48.311Z,1516415388.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:48.661Z,1516415388.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:49.068Z,1516415389.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:49.467Z,1516415389.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:49.855Z,1516415389.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:50.255Z,1516415390.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:50.652Z,1516415390.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:51.059Z,1516415391.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:51.451Z,1516415391.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:51.853Z,1516415391.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:52.255Z,1516415392.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:52.659Z,1516415392.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:53.054Z,1516415393.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:53.454Z,1516415393.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:53.855Z,1516415393.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:54.264Z,1516415394.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:54.661Z,1516415394.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:55.063Z,1516415395.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:55.462Z,1516415395.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:55.863Z,1516415395.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:56.251Z,1516415396.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:56.651Z,1516415396.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:57.059Z,1516415397.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:57.451Z,1516415397.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:57.848Z,1516415397.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:58.250Z,1516415398.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:58.651Z,1516415398.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:59.052Z,1516415399.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:59.454Z,1516415399.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:29:59.863Z,1516415399.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:00.256Z,1516415400.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:00.663Z,1516415400.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:01.058Z,1516415401.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:01.458Z,1516415401.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:01.862Z,1516415401.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:02.268Z,1516415402.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:02.651Z,1516415402.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:03.058Z,1516415403.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:03.459Z,1516415403.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:03.851Z,1516415403.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:04.254Z,1516415404.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:04.655Z,1516415404.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:05.051Z,1516415405.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:05.461Z,1516415405.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:05.855Z,1516415405.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:06.262Z,1516415406.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:06.662Z,1516415406.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:07.063Z,1516415407.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:07.458Z,1516415407.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:07.858Z,1516415407.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:08.265Z,1516415408.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:08.660Z,1516415408.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:09.062Z,1516415409.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:09.458Z,1516415409.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:09.848Z,1516415409.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:10.258Z,1516415410.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:10.658Z,1516415410.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:11.052Z,1516415411.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:11.458Z,1516415411.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:11.855Z,1516415411.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:12.251Z,1516415412.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:12.654Z,1516415412.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:13.060Z,1516415413.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:13.445Z,1516415413.445 [NAL9602](INFO): Powering down
2018-01-20T02:30:13.465Z,1516415413.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:13.872Z,1516415413.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:14.261Z,1516415414.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:14.652Z,1516415414.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:15.050Z,1516415415.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:15.459Z,1516415415.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:15.852Z,1516415415.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:16.262Z,1516415416.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:16.659Z,1516415416.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:17.052Z,1516415417.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:17.455Z,1516415417.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:17.863Z,1516415417.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:18.263Z,1516415418.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:18.661Z,1516415418.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:19.061Z,1516415419.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:19.451Z,1516415419.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:19.858Z,1516415419.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:20.259Z,1516415420.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:20.651Z,1516415420.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:21.054Z,1516415421.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:21.463Z,1516415421.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:21.858Z,1516415421.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:22.267Z,1516415422.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:22.663Z,1516415422.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:23.058Z,1516415423.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:23.463Z,1516415423.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:23.858Z,1516415423.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:24.262Z,1516415424.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:24.650Z,1516415424.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:25.058Z,1516415425.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:25.451Z,1516415425.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:25.867Z,1516415425.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:26.262Z,1516415426.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:26.651Z,1516415426.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:27.050Z,1516415427.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:27.459Z,1516415427.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:27.851Z,1516415427.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:28.255Z,1516415428.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:28.659Z,1516415428.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:29.051Z,1516415429.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:29.455Z,1516415429.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:29.852Z,1516415429.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:30.251Z,1516415430.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:30.656Z,1516415430.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:31.057Z,1516415431.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:31.455Z,1516415431.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:31.896Z,1516415431.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:32.258Z,1516415432.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:32.662Z,1516415432.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:33.063Z,1516415433.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:33.451Z,1516415433.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:33.851Z,1516415433.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:34.259Z,1516415434.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:34.653Z,1516415434.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:35.059Z,1516415435.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:35.455Z,1516415435.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:35.852Z,1516415435.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:36.251Z,1516415436.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:36.658Z,1516415436.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:37.052Z,1516415437.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:37.451Z,1516415437.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:37.862Z,1516415437.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:38.259Z,1516415438.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:38.671Z,1516415438.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:39.067Z,1516415439.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:39.463Z,1516415439.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:39.862Z,1516415439.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:40.264Z,1516415440.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:40.658Z,1516415440.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:41.058Z,1516415441.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:41.450Z,1516415441.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:41.851Z,1516415441.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:42.251Z,1516415442.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:42.674Z,1516415442.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:43.051Z,1516415443.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:43.451Z,1516415443.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:43.850Z,1516415443.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:44.251Z,1516415444.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:44.651Z,1516415444.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:45.055Z,1516415445.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:48.344Z,1516415448.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:48.471Z,1516415448.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:48.840Z,1516415448.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:49.243Z,1516415449.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:49.638Z,1516415449.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:50.034Z,1516415450.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:50.444Z,1516415450.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:50.840Z,1516415450.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:51.239Z,1516415451.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:51.636Z,1516415451.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:52.035Z,1516415452.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:52.434Z,1516415452.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:52.836Z,1516415452.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:53.239Z,1516415453.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:53.638Z,1516415453.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:54.036Z,1516415454.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:54.442Z,1516415454.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:54.834Z,1516415454.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:55.238Z,1516415455.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:55.638Z,1516415455.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:56.038Z,1516415456.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:56.438Z,1516415456.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:56.843Z,1516415456.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:57.234Z,1516415457.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:57.636Z,1516415457.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:58.038Z,1516415458.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:58.438Z,1516415458.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:58.835Z,1516415458.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:59.242Z,1516415459.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:30:59.634Z,1516415459.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:00.042Z,1516415460.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:00.442Z,1516415460.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:00.838Z,1516415460.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:01.238Z,1516415461.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:01.643Z,1516415461.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:02.034Z,1516415462.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:02.442Z,1516415462.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:02.842Z,1516415462.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:03.238Z,1516415463.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:03.638Z,1516415463.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:04.042Z,1516415464.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:04.434Z,1516415464.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:04.836Z,1516415464.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:05.242Z,1516415465.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:05.638Z,1516415465.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:06.042Z,1516415466.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:06.443Z,1516415466.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:06.834Z,1516415466.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:07.238Z,1516415467.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:07.639Z,1516415467.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:08.038Z,1516415468.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:08.442Z,1516415468.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:08.843Z,1516415468.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:09.234Z,1516415469.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:09.636Z,1516415469.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:10.043Z,1516415470.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:10.439Z,1516415470.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:10.828Z,1516415470.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:11.234Z,1516415471.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:11.634Z,1516415471.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:12.027Z,1516415472.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:12.443Z,1516415472.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:12.834Z,1516415472.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:13.234Z,1516415473.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:13.631Z,1516415473.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:14.031Z,1516415474.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:14.435Z,1516415474.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:14.835Z,1516415474.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:15.231Z,1516415475.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:15.628Z,1516415475.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:16.032Z,1516415476.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:16.431Z,1516415476.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:16.828Z,1516415476.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:17.231Z,1516415477.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:17.639Z,1516415477.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:18.038Z,1516415478.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:18.440Z,1516415478.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:18.837Z,1516415478.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:19.239Z,1516415479.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:19.642Z,1516415479.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:20.042Z,1516415480.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:20.442Z,1516415480.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:20.834Z,1516415480.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:21.243Z,1516415481.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:21.638Z,1516415481.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:22.043Z,1516415482.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:22.434Z,1516415482.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:22.839Z,1516415482.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:23.234Z,1516415483.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:23.634Z,1516415483.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:24.044Z,1516415484.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:24.443Z,1516415484.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:24.843Z,1516415484.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:25.240Z,1516415485.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:25.625Z,1516415485.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:26.031Z,1516415486.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:26.435Z,1516415486.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:26.829Z,1516415486.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:27.235Z,1516415487.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:27.631Z,1516415487.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:28.028Z,1516415488.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:28.435Z,1516415488.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:28.834Z,1516415488.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:29.234Z,1516415489.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:29.639Z,1516415489.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:30.035Z,1516415490.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:30.432Z,1516415490.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:30.837Z,1516415490.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:31.240Z,1516415491.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:31.636Z,1516415491.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:32.035Z,1516415492.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:32.442Z,1516415492.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:32.831Z,1516415492.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:33.234Z,1516415493.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:33.638Z,1516415493.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:34.038Z,1516415494.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:34.447Z,1516415494.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:34.838Z,1516415494.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:35.238Z,1516415495.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:35.634Z,1516415495.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:36.042Z,1516415496.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:36.431Z,1516415496.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:36.831Z,1516415496.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:37.231Z,1516415497.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:37.628Z,1516415497.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:38.035Z,1516415498.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:38.431Z,1516415498.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:38.828Z,1516415498.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:39.231Z,1516415499.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:39.634Z,1516415499.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:40.034Z,1516415500.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:40.431Z,1516415500.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:40.831Z,1516415500.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:41.238Z,1516415501.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:41.635Z,1516415501.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:42.039Z,1516415502.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:42.439Z,1516415502.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:42.837Z,1516415502.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:43.238Z,1516415503.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:43.636Z,1516415503.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:44.034Z,1516415504.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:44.442Z,1516415504.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:44.837Z,1516415504.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:45.234Z,1516415505.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:48.530Z,1516415508.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:48.652Z,1516415508.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:48.999Z,1516415508.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:49.404Z,1516415509.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:49.798Z,1516415509.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:50.197Z,1516415510.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:50.598Z,1516415510.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:50.000Z,1516415511.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:51.398Z,1516415511.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:51.806Z,1516415511.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:52.191Z,1516415512.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:52.615Z,1516415512.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:52.991Z,1516415512.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:53.391Z,1516415513.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:53.795Z,1516415513.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:54.191Z,1516415514.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:54.591Z,1516415514.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:55.003Z,1516415515.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:55.402Z,1516415515.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:55.799Z,1516415515.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:56.199Z,1516415516.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:56.598Z,1516415516.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:56.998Z,1516415516.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:57.401Z,1516415517.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:57.798Z,1516415517.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:58.198Z,1516415518.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:58.598Z,1516415518.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:58.998Z,1516415518.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:59.398Z,1516415519.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:31:59.798Z,1516415519.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:00.206Z,1516415520.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:00.588Z,1516415520.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:01.007Z,1516415521.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:01.391Z,1516415521.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:01.791Z,1516415521.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:01.826Z,1516415521.826 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:32:01.826Z,1516415521.826 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-01-20T02:32:01.826Z,1516415521.826 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:32:01.851Z,1516415521.851 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:32:02.195Z,1516415522.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:02.243Z,1516415522.243 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:32:02.243Z,1516415522.243 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-01-20T02:32:02.591Z,1516415522.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:02.631Z,1516415522.631 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:32:02.631Z,1516415522.631 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:32:02.631Z,1516415522.631 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:32:02.991Z,1516415522.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:03.395Z,1516415523.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:03.791Z,1516415523.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:04.192Z,1516415524.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:04.599Z,1516415524.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:04.995Z,1516415524.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:05.392Z,1516415525.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:05.800Z,1516415525.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:06.204Z,1516415526.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:06.596Z,1516415526.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:07.000Z,1516415527.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:07.398Z,1516415527.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:07.796Z,1516415527.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:08.206Z,1516415528.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:08.599Z,1516415528.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:08.999Z,1516415528.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:09.398Z,1516415529.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:09.807Z,1516415529.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:10.199Z,1516415530.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:10.612Z,1516415530.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:11.003Z,1516415531.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:11.391Z,1516415531.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:11.807Z,1516415531.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:12.191Z,1516415532.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:12.592Z,1516415532.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:12.998Z,1516415532.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:13.391Z,1516415533.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:13.791Z,1516415533.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:14.198Z,1516415534.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:14.591Z,1516415534.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:14.992Z,1516415534.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:15.414Z,1516415535.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:15.806Z,1516415535.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:16.188Z,1516415536.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:16.595Z,1516415536.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:16.991Z,1516415536.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:17.398Z,1516415537.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:17.795Z,1516415537.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:18.199Z,1516415538.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:18.592Z,1516415538.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:18.995Z,1516415538.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:19.395Z,1516415539.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:19.792Z,1516415539.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:20.199Z,1516415540.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:20.595Z,1516415540.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:20.996Z,1516415540.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:21.403Z,1516415541.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:21.804Z,1516415541.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:22.205Z,1516415542.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:22.599Z,1516415542.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:23.018Z,1516415543.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:23.401Z,1516415543.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:23.803Z,1516415543.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:24.196Z,1516415544.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:24.599Z,1516415544.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:24.999Z,1516415544.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:25.395Z,1516415545.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:25.800Z,1516415545.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:26.203Z,1516415546.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:26.598Z,1516415546.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:26.000Z,1516415547.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:27.398Z,1516415547.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:27.806Z,1516415547.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:28.198Z,1516415548.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:28.606Z,1516415548.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:29.006Z,1516415549.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:29.406Z,1516415549.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:29.798Z,1516415549.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:30.207Z,1516415550.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:30.598Z,1516415550.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:31.002Z,1516415551.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:31.398Z,1516415551.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:31.800Z,1516415551.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:32.198Z,1516415552.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:32.606Z,1516415552.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:32.000Z,1516415553.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:33.402Z,1516415553.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:33.798Z,1516415553.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:34.206Z,1516415554.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:34.598Z,1516415554.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:35.002Z,1516415555.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:35.398Z,1516415555.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:35.802Z,1516415555.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:36.198Z,1516415556.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:36.598Z,1516415556.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:36.998Z,1516415556.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:37.407Z,1516415557.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:37.799Z,1516415557.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:38.207Z,1516415558.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:38.606Z,1516415558.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:38.000Z,1516415559.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:39.398Z,1516415559.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:39.801Z,1516415559.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:40.198Z,1516415560.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:40.602Z,1516415560.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:41.002Z,1516415561.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:41.398Z,1516415561.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:41.799Z,1516415561.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:42.205Z,1516415562.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:42.598Z,1516415562.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:43.002Z,1516415563.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:43.401Z,1516415563.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:43.791Z,1516415563.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:44.190Z,1516415564.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:44.607Z,1516415564.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:44.991Z,1516415564.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:45.391Z,1516415565.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:48.677Z,1516415568.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:48.795Z,1516415568.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:49.190Z,1516415569.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:49.591Z,1516415569.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:49.991Z,1516415569.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:50.389Z,1516415570.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:50.792Z,1516415570.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:51.188Z,1516415571.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:51.590Z,1516415571.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:51.990Z,1516415571.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:52.388Z,1516415572.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:52.795Z,1516415572.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:53.193Z,1516415573.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:53.590Z,1516415573.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:53.992Z,1516415573.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:54.391Z,1516415574.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:54.788Z,1516415574.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:55.185Z,1516415575.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:55.593Z,1516415575.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:55.991Z,1516415575.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:56.390Z,1516415576.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:56.791Z,1516415576.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:57.190Z,1516415577.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:57.592Z,1516415577.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:57.994Z,1516415577.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:58.394Z,1516415578.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:58.790Z,1516415578.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:59.193Z,1516415579.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:59.589Z,1516415579.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:32:59.995Z,1516415579.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:00.398Z,1516415580.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:00.790Z,1516415580.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:01.191Z,1516415581.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:01.595Z,1516415581.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:01.990Z,1516415581.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:02.389Z,1516415582.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:02.795Z,1516415582.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:03.188Z,1516415583.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:03.594Z,1516415583.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:03.990Z,1516415583.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:04.390Z,1516415584.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:04.798Z,1516415584.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:05.196Z,1516415585.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:05.590Z,1516415585.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:05.993Z,1516415585.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:06.396Z,1516415586.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:06.788Z,1516415586.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:07.192Z,1516415587.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:07.593Z,1516415587.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:07.991Z,1516415587.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:08.392Z,1516415588.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:08.798Z,1516415588.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:09.188Z,1516415589.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:09.587Z,1516415589.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:09.997Z,1516415589.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:10.390Z,1516415590.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:10.793Z,1516415590.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:11.192Z,1516415591.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:11.590Z,1516415591.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:11.998Z,1516415591.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:12.004Z,1516415592.004 [PNI_TCM](ERROR): CRC does not match. Expected:0x31640 got:0x19058
2018-01-20T02:33:12.397Z,1516415592.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:12.781Z,1516415592.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:13.178Z,1516415593.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:13.588Z,1516415593.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:13.985Z,1516415593.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:14.388Z,1516415594.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:14.780Z,1516415594.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:15.206Z,1516415595.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:15.586Z,1516415595.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:15.982Z,1516415595.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:16.378Z,1516415596.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:16.787Z,1516415596.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:17.180Z,1516415597.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:17.585Z,1516415597.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:17.986Z,1516415597.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:18.383Z,1516415598.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:18.793Z,1516415598.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:19.196Z,1516415599.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:19.582Z,1516415599.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:19.993Z,1516415599.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:20.392Z,1516415600.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:20.790Z,1516415600.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:21.187Z,1516415601.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:21.595Z,1516415601.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:21.998Z,1516415601.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:22.390Z,1516415602.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:22.790Z,1516415602.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:23.179Z,1516415603.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:23.596Z,1516415603.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:23.994Z,1516415603.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:24.390Z,1516415604.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:24.779Z,1516415604.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:25.190Z,1516415605.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:25.580Z,1516415605.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:25.986Z,1516415605.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:26.383Z,1516415606.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:26.776Z,1516415606.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:27.178Z,1516415607.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:27.582Z,1516415607.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:27.986Z,1516415607.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:28.386Z,1516415608.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:28.787Z,1516415608.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:29.180Z,1516415609.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:29.583Z,1516415609.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:29.987Z,1516415609.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:30.383Z,1516415610.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:30.787Z,1516415610.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:31.186Z,1516415611.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:31.588Z,1516415611.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:31.986Z,1516415611.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:32.390Z,1516415612.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:32.786Z,1516415612.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:33.190Z,1516415613.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:33.590Z,1516415613.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:33.994Z,1516415613.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:34.386Z,1516415614.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:34.790Z,1516415614.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:35.186Z,1516415615.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:35.594Z,1516415615.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:35.986Z,1516415615.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:36.394Z,1516415616.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:36.794Z,1516415616.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:37.178Z,1516415617.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:37.579Z,1516415617.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:37.986Z,1516415617.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:38.390Z,1516415618.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:38.776Z,1516415618.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:39.186Z,1516415619.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:39.578Z,1516415619.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:39.994Z,1516415619.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:40.386Z,1516415620.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:40.786Z,1516415620.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:41.179Z,1516415621.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:41.586Z,1516415621.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:41.991Z,1516415621.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:42.390Z,1516415622.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:42.795Z,1516415622.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:43.194Z,1516415623.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:43.580Z,1516415623.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:43.986Z,1516415623.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:44.386Z,1516415624.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:44.781Z,1516415624.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:45.184Z,1516415625.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:45.588Z,1516415625.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:48.865Z,1516415628.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:48.986Z,1516415628.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:49.335Z,1516415629.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:49.735Z,1516415629.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:50.142Z,1516415630.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:50.542Z,1516415630.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:50.935Z,1516415630.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:51.342Z,1516415631.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:51.734Z,1516415631.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:52.134Z,1516415632.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:52.537Z,1516415632.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:52.950Z,1516415632.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:53.336Z,1516415633.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:53.743Z,1516415633.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:54.134Z,1516415634.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:54.536Z,1516415634.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:54.937Z,1516415634.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:55.334Z,1516415635.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:55.728Z,1516415635.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:56.134Z,1516415636.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:56.538Z,1516415636.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:56.927Z,1516415636.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:57.344Z,1516415637.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:57.743Z,1516415637.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:58.127Z,1516415638.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:58.538Z,1516415638.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:58.938Z,1516415638.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:59.327Z,1516415639.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:33:59.748Z,1516415639.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:00.131Z,1516415640.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:00.527Z,1516415640.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:00.944Z,1516415640.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:01.331Z,1516415641.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:01.728Z,1516415641.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:02.131Z,1516415642.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:02.531Z,1516415642.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:02.934Z,1516415642.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:03.335Z,1516415643.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:03.751Z,1516415643.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:04.127Z,1516415644.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:04.535Z,1516415644.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:04.931Z,1516415644.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:05.327Z,1516415645.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:05.735Z,1516415645.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:06.131Z,1516415646.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:06.527Z,1516415646.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:06.931Z,1516415646.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:07.339Z,1516415647.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:07.739Z,1516415647.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:08.140Z,1516415648.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:08.537Z,1516415648.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:08.936Z,1516415648.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:09.337Z,1516415649.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:09.744Z,1516415649.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:10.137Z,1516415650.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:10.533Z,1516415650.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:10.951Z,1516415650.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:11.341Z,1516415651.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:11.736Z,1516415651.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:12.147Z,1516415652.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:12.540Z,1516415652.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:12.940Z,1516415652.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:13.337Z,1516415653.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:13.731Z,1516415653.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:14.135Z,1516415654.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:14.534Z,1516415654.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:14.943Z,1516415654.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:15.334Z,1516415655.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:15.734Z,1516415655.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:16.134Z,1516415656.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:16.536Z,1516415656.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:16.953Z,1516415656.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:17.342Z,1516415657.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:17.728Z,1516415657.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:18.134Z,1516415658.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:18.527Z,1516415658.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:18.928Z,1516415658.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:19.343Z,1516415659.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:19.727Z,1516415659.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:20.127Z,1516415660.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:20.547Z,1516415660.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:20.931Z,1516415660.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:21.334Z,1516415661.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:21.731Z,1516415661.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:22.134Z,1516415662.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:22.528Z,1516415662.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:22.931Z,1516415662.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:23.334Z,1516415663.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:23.730Z,1516415663.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:24.139Z,1516415664.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:24.538Z,1516415664.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:24.931Z,1516415664.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:25.334Z,1516415665.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:25.738Z,1516415665.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:26.138Z,1516415666.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:26.535Z,1516415666.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:26.936Z,1516415666.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:27.338Z,1516415667.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:27.737Z,1516415667.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:28.134Z,1516415668.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:28.534Z,1516415668.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:28.942Z,1516415668.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:29.338Z,1516415669.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:29.735Z,1516415669.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:30.139Z,1516415670.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:30.539Z,1516415670.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:30.936Z,1516415670.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:31.337Z,1516415671.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:31.737Z,1516415671.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:32.136Z,1516415672.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:32.544Z,1516415672.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:32.938Z,1516415672.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:33.337Z,1516415673.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:33.735Z,1516415673.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:34.143Z,1516415674.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:34.528Z,1516415674.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:34.934Z,1516415674.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:35.339Z,1516415675.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:35.733Z,1516415675.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:36.147Z,1516415676.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:36.529Z,1516415676.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:36.927Z,1516415676.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:37.335Z,1516415677.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:37.731Z,1516415677.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:38.134Z,1516415678.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:38.533Z,1516415678.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:38.935Z,1516415678.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:39.334Z,1516415679.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:39.738Z,1516415679.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:40.139Z,1516415680.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:40.535Z,1516415680.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:40.935Z,1516415680.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:41.341Z,1516415681.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:41.733Z,1516415681.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:42.136Z,1516415682.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:42.537Z,1516415682.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:42.935Z,1516415682.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:43.339Z,1516415683.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:43.739Z,1516415683.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:44.138Z,1516415684.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:44.534Z,1516415684.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:44.945Z,1516415684.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:44.965Z,1516415684.965 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T02:34:44.965Z,1516415684.965 [Default:CheckIn:C.Wait] Stopped
2018-01-20T02:34:44.965Z,1516415684.965 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T02:34:44.965Z,1516415684.965 [Default:CheckIn:D] Running Loop=1
2018-01-20T02:34:45.328Z,1516415685.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:45.360Z,1516415685.360 [Default:CheckIn:D] Stopped
2018-01-20T02:34:45.360Z,1516415685.360 [Default:CheckIn:E] Running Loop=1
2018-01-20T02:34:45.752Z,1516415685.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:45.773Z,1516415685.773 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.145569 min 
2018-01-20T02:34:45.773Z,1516415685.773 [Default:CheckIn:E] Stopped
2018-01-20T02:34:45.773Z,1516415685.773 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T02:34:45.773Z,1516415685.773 [Default:CheckIn] Stopped
2018-01-20T02:34:45.773Z,1516415685.773 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T02:34:45.774Z,1516415685.774 [Default:CheckIn](INFO): Running loop #4
2018-01-20T02:34:45.774Z,1516415685.774 [Default:CheckIn] Running Loop=4
2018-01-20T02:34:45.774Z,1516415685.774 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T02:34:45.774Z,1516415685.774 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T02:34:49.017Z,1516415689.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:49.117Z,1516415689.117 [NAL9602](INFO): Powering up
2018-01-20T02:34:49.135Z,1516415689.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:49.523Z,1516415689.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:49.931Z,1516415689.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:50.324Z,1516415690.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:50.723Z,1516415690.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:51.130Z,1516415691.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:51.525Z,1516415691.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:51.930Z,1516415691.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:52.325Z,1516415692.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:52.726Z,1516415692.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:53.123Z,1516415693.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:53.525Z,1516415693.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:53.924Z,1516415693.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:54.328Z,1516415694.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:54.724Z,1516415694.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:55.124Z,1516415695.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:55.528Z,1516415695.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:55.928Z,1516415695.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:56.324Z,1516415696.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:56.731Z,1516415696.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:57.132Z,1516415697.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:57.526Z,1516415697.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:57.924Z,1516415697.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:58.328Z,1516415698.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:58.721Z,1516415698.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:59.132Z,1516415699.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:59.515Z,1516415699.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:34:59.934Z,1516415699.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:00.298Z,1516415700.298 [NAL9602](INFO): NAL9602 initialized
2018-01-20T02:35:00.329Z,1516415700.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:00.735Z,1516415700.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:01.134Z,1516415701.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:01.534Z,1516415701.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:01.926Z,1516415701.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:02.318Z,1516415702.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:02.721Z,1516415702.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:02.760Z,1516415702.760 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:35:02.760Z,1516415702.760 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-01-20T02:35:02.760Z,1516415702.760 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:35:02.789Z,1516415702.789 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:35:03.126Z,1516415703.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:03.178Z,1516415703.178 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:35:03.178Z,1516415703.178 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-01-20T02:35:03.522Z,1516415703.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:03.540Z,1516415703.540 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:35:03.553Z,1516415703.553 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:35:03.553Z,1516415703.553 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:35:03.923Z,1516415703.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:04.316Z,1516415704.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:04.721Z,1516415704.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:05.129Z,1516415705.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:05.533Z,1516415705.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:05.918Z,1516415705.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:06.335Z,1516415706.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:06.717Z,1516415706.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:07.120Z,1516415707.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:07.525Z,1516415707.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:07.921Z,1516415707.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:08.325Z,1516415708.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:08.716Z,1516415708.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:09.124Z,1516415709.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:09.519Z,1516415709.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:09.922Z,1516415709.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:10.325Z,1516415710.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:10.719Z,1516415710.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:11.127Z,1516415711.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:11.522Z,1516415711.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:11.927Z,1516415711.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:12.326Z,1516415712.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:12.728Z,1516415712.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:13.127Z,1516415713.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:13.523Z,1516415713.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:13.916Z,1516415713.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:14.333Z,1516415714.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:14.727Z,1516415714.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:15.128Z,1516415715.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:15.534Z,1516415715.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:15.927Z,1516415715.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:16.329Z,1516415716.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:16.721Z,1516415716.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:17.130Z,1516415717.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:17.531Z,1516415717.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:17.916Z,1516415717.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:18.332Z,1516415718.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:18.720Z,1516415718.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:19.116Z,1516415719.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:19.534Z,1516415719.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:19.921Z,1516415719.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:20.316Z,1516415720.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:20.725Z,1516415720.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:21.124Z,1516415721.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:21.524Z,1516415721.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:21.925Z,1516415721.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:22.331Z,1516415722.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:22.721Z,1516415722.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:23.120Z,1516415723.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:23.530Z,1516415723.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:23.922Z,1516415723.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:24.328Z,1516415724.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:24.729Z,1516415724.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:25.130Z,1516415725.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:25.522Z,1516415725.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:25.928Z,1516415725.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:26.330Z,1516415726.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:26.725Z,1516415726.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:27.128Z,1516415727.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:27.516Z,1516415727.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:27.927Z,1516415727.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:28.329Z,1516415728.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:28.716Z,1516415728.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:29.121Z,1516415729.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:29.521Z,1516415729.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:29.918Z,1516415729.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:30.333Z,1516415730.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:30.734Z,1516415730.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:31.118Z,1516415731.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:31.535Z,1516415731.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:31.922Z,1516415731.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:32.307Z,1516415732.307 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-01-20T02:35:32.381Z,1516415732.381 [NAL9602](FAULT): received: 
+CSQ:0

OK62, 2, 0, 0, 0

OK
2018-01-20T02:35:32.381Z,1516415732.381 [NAL9602] Data Fault, FailCount= 1
2018-01-20T02:35:32.381Z,1516415732.381 [NAL9602](ERROR): Data Fault
2018-01-20T02:35:32.427Z,1516415732.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:32.473Z,1516415732.473 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T02:35:32.707Z,1516415732.707 [NAL9602](INFO): Powering down
2018-01-20T02:35:32.725Z,1516415732.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:33.125Z,1516415733.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:33.524Z,1516415733.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:33.568Z,1516415733.568 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T02:35:33.568Z,1516415733.568 [NAL9602] No Fault, FailCount= 1
2018-01-20T02:35:33.925Z,1516415733.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:34.333Z,1516415734.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:34.726Z,1516415734.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:35.128Z,1516415735.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:35.529Z,1516415735.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:35.914Z,1516415735.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:36.328Z,1516415736.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:36.733Z,1516415736.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:37.116Z,1516415737.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:37.528Z,1516415737.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:37.929Z,1516415737.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:38.316Z,1516415738.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:38.728Z,1516415738.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:39.122Z,1516415739.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:39.532Z,1516415739.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:39.920Z,1516415739.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:40.320Z,1516415740.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:40.724Z,1516415740.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:41.120Z,1516415741.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:41.524Z,1516415741.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:41.916Z,1516415741.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:42.320Z,1516415742.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:42.723Z,1516415742.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:43.116Z,1516415743.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:43.524Z,1516415743.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:43.919Z,1516415743.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:44.326Z,1516415744.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:44.727Z,1516415744.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:45.119Z,1516415745.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:45.526Z,1516415745.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:45.926Z,1516415745.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:49.215Z,1516415749.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:49.343Z,1516415749.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:49.698Z,1516415749.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:50.100Z,1516415750.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:50.494Z,1516415750.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:50.895Z,1516415750.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:51.294Z,1516415751.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:51.690Z,1516415751.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:52.090Z,1516415752.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:52.493Z,1516415752.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:52.882Z,1516415752.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:53.294Z,1516415753.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:53.699Z,1516415753.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:54.082Z,1516415754.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:54.490Z,1516415754.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:54.899Z,1516415754.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:55.290Z,1516415755.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:55.695Z,1516415755.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:56.093Z,1516415756.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:56.491Z,1516415756.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:56.895Z,1516415756.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:57.297Z,1516415757.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:57.691Z,1516415757.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:58.095Z,1516415758.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:58.499Z,1516415758.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:58.895Z,1516415758.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:59.296Z,1516415759.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:35:59.692Z,1516415759.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:00.091Z,1516415760.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:00.491Z,1516415760.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:00.887Z,1516415760.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:01.291Z,1516415761.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:01.695Z,1516415761.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:02.090Z,1516415762.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:02.490Z,1516415762.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:02.874Z,1516415762.874 [NAL9602](INFO): Powering up NAL9602
2018-01-20T02:36:02.906Z,1516415762.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:03.290Z,1516415763.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:03.691Z,1516415763.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:04.091Z,1516415764.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:04.499Z,1516415764.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:04.891Z,1516415764.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:05.299Z,1516415765.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:05.681Z,1516415765.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:06.091Z,1516415766.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:06.495Z,1516415766.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:06.893Z,1516415766.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:07.292Z,1516415767.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:07.695Z,1516415767.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:08.090Z,1516415768.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:08.490Z,1516415768.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:08.891Z,1516415768.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:09.294Z,1516415769.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:09.690Z,1516415769.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:10.094Z,1516415770.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:10.498Z,1516415770.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:10.898Z,1516415770.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:11.291Z,1516415771.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:11.680Z,1516415771.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:12.090Z,1516415772.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:12.489Z,1516415772.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:12.892Z,1516415772.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:13.290Z,1516415773.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:13.701Z,1516415773.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:14.066Z,1516415774.066 [NAL9602](INFO): NAL9602 initialized
2018-01-20T02:36:14.092Z,1516415774.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:14.491Z,1516415774.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:14.905Z,1516415774.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:15.301Z,1516415775.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:15.701Z,1516415775.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:16.083Z,1516415776.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:16.483Z,1516415776.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:16.907Z,1516415776.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:17.306Z,1516415777.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:17.701Z,1516415777.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:18.100Z,1516415778.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:18.482Z,1516415778.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:18.883Z,1516415778.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:19.283Z,1516415779.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:19.691Z,1516415779.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:20.083Z,1516415780.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:20.487Z,1516415780.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:20.882Z,1516415780.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:21.287Z,1516415781.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:21.715Z,1516415781.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:22.106Z,1516415782.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:22.494Z,1516415782.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:22.912Z,1516415782.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:23.287Z,1516415783.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:23.683Z,1516415783.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:24.091Z,1516415784.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:24.487Z,1516415784.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:24.883Z,1516415784.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:25.287Z,1516415785.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:25.695Z,1516415785.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:26.095Z,1516415786.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:26.488Z,1516415786.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:26.906Z,1516415786.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:27.306Z,1516415787.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:27.705Z,1516415787.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:28.106Z,1516415788.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:28.495Z,1516415788.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:28.896Z,1516415788.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:29.293Z,1516415789.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:29.690Z,1516415789.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:30.095Z,1516415790.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:30.491Z,1516415790.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:30.890Z,1516415790.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:31.296Z,1516415791.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:31.698Z,1516415791.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:32.101Z,1516415792.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:32.502Z,1516415792.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:32.905Z,1516415792.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:33.301Z,1516415793.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:33.699Z,1516415793.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:34.090Z,1516415794.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:34.483Z,1516415794.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:34.900Z,1516415794.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:35.290Z,1516415795.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:35.698Z,1516415795.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:36.087Z,1516415796.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:36.491Z,1516415796.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:36.887Z,1516415796.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:37.311Z,1516415797.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:37.710Z,1516415797.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:38.107Z,1516415798.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:38.512Z,1516415798.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:38.888Z,1516415798.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:39.284Z,1516415799.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:39.685Z,1516415799.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:40.088Z,1516415800.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:40.483Z,1516415800.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:40.880Z,1516415800.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:41.287Z,1516415801.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:41.691Z,1516415801.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:42.091Z,1516415802.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:42.518Z,1516415802.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:42.906Z,1516415802.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:43.306Z,1516415803.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:43.706Z,1516415803.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:44.096Z,1516415804.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:44.496Z,1516415804.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:44.893Z,1516415804.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:45.296Z,1516415805.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:45.692Z,1516415805.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:46.093Z,1516415806.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:49.370Z,1516415809.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:49.516Z,1516415809.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:49.870Z,1516415809.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:50.278Z,1516415810.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:50.653Z,1516415810.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:51.051Z,1516415811.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:51.453Z,1516415811.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:51.852Z,1516415811.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:52.255Z,1516415812.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:52.648Z,1516415812.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:53.049Z,1516415813.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:53.463Z,1516415813.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:53.858Z,1516415813.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:54.257Z,1516415814.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:54.670Z,1516415814.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:55.069Z,1516415815.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:55.459Z,1516415815.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:55.847Z,1516415815.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:56.247Z,1516415816.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:56.643Z,1516415816.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:57.047Z,1516415817.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:57.443Z,1516415817.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:57.845Z,1516415817.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:58.251Z,1516415818.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:58.644Z,1516415818.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:59.041Z,1516415819.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:59.481Z,1516415819.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:36:59.855Z,1516415819.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:00.254Z,1516415820.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:00.659Z,1516415820.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:01.052Z,1516415821.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:01.446Z,1516415821.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:01.863Z,1516415821.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:02.243Z,1516415822.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:02.643Z,1516415822.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:03.047Z,1516415823.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:03.447Z,1516415823.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:03.843Z,1516415823.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:04.247Z,1516415824.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:04.658Z,1516415824.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:05.054Z,1516415825.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:05.458Z,1516415825.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:05.860Z,1516415825.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:06.247Z,1516415826.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:06.647Z,1516415826.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:07.047Z,1516415827.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:07.444Z,1516415827.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:07.855Z,1516415827.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:08.252Z,1516415828.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:08.644Z,1516415828.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:09.055Z,1516415829.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:09.456Z,1516415829.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:09.857Z,1516415829.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:10.260Z,1516415830.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:10.666Z,1516415830.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:11.058Z,1516415831.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:11.447Z,1516415831.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:11.844Z,1516415831.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:12.243Z,1516415832.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:12.647Z,1516415832.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:13.043Z,1516415833.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:13.442Z,1516415833.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:13.851Z,1516415833.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:14.251Z,1516415834.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:14.645Z,1516415834.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:15.065Z,1516415835.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:15.466Z,1516415835.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:15.862Z,1516415835.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:16.266Z,1516415836.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:16.652Z,1516415836.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:17.048Z,1516415837.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:17.452Z,1516415837.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:17.851Z,1516415837.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:18.245Z,1516415838.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:18.654Z,1516415838.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:19.052Z,1516415839.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:19.442Z,1516415839.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:19.858Z,1516415839.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:20.263Z,1516415840.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:20.657Z,1516415840.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:21.070Z,1516415841.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:21.463Z,1516415841.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:21.844Z,1516415841.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:22.247Z,1516415842.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:22.643Z,1516415842.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:23.043Z,1516415843.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:23.450Z,1516415843.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:23.847Z,1516415843.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:24.247Z,1516415844.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:24.655Z,1516415844.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:25.055Z,1516415845.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:25.470Z,1516415845.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:25.874Z,1516415845.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:26.265Z,1516415846.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:26.665Z,1516415846.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:27.058Z,1516415847.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:27.443Z,1516415847.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:27.845Z,1516415847.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:28.247Z,1516415848.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:28.643Z,1516415848.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:29.042Z,1516415849.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:29.467Z,1516415849.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:29.847Z,1516415849.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:30.243Z,1516415850.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:30.671Z,1516415850.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:31.054Z,1516415851.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:31.462Z,1516415851.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:31.862Z,1516415851.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:32.248Z,1516415852.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:32.642Z,1516415852.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:33.056Z,1516415853.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:33.452Z,1516415853.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:33.848Z,1516415853.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:34.251Z,1516415854.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:34.649Z,1516415854.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:35.046Z,1516415855.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:35.453Z,1516415855.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:35.866Z,1516415855.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:36.259Z,1516415856.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:36.666Z,1516415856.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:37.062Z,1516415857.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:37.443Z,1516415857.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:37.852Z,1516415857.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:38.247Z,1516415858.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:38.642Z,1516415858.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:39.050Z,1516415859.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:39.452Z,1516415859.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:39.845Z,1516415859.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:40.252Z,1516415860.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:40.655Z,1516415860.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:41.058Z,1516415861.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:41.470Z,1516415861.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:41.862Z,1516415861.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:42.266Z,1516415862.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:42.650Z,1516415862.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:43.043Z,1516415863.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:43.459Z,1516415863.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:43.847Z,1516415863.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:44.243Z,1516415864.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:44.642Z,1516415864.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:45.047Z,1516415865.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:45.443Z,1516415865.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:45.845Z,1516415865.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:46.267Z,1516415866.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:49.542Z,1516415869.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:49.678Z,1516415869.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:50.054Z,1516415870.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:50.442Z,1516415870.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:50.830Z,1516415870.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:51.236Z,1516415871.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:51.641Z,1516415871.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:52.044Z,1516415872.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:52.443Z,1516415872.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:52.843Z,1516415872.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:53.233Z,1516415873.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:53.643Z,1516415873.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:54.040Z,1516415874.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:54.450Z,1516415874.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:54.850Z,1516415874.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:55.251Z,1516415875.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:55.644Z,1516415875.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:56.042Z,1516415876.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:56.431Z,1516415876.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:56.830Z,1516415876.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:57.241Z,1516415877.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:57.247Z,1516415877.247 [PNI_TCM](ERROR): CRC does not match. Expected:0x4111 got:0x50973
2018-01-20T02:37:57.637Z,1516415877.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:58.039Z,1516415878.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:58.437Z,1516415878.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:58.841Z,1516415878.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:59.235Z,1516415879.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:37:59.646Z,1516415879.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:00.048Z,1516415880.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:00.446Z,1516415880.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:00.853Z,1516415880.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:01.245Z,1516415881.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:01.628Z,1516415881.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:02.046Z,1516415882.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:02.052Z,1516415882.052 [PNI_TCM](ERROR): CRC does not match. Expected:0x28087 got:0x5877
2018-01-20T02:38:02.448Z,1516415882.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:02.830Z,1516415882.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:03.231Z,1516415883.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:03.650Z,1516415883.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:03.656Z,1516415883.656 [PNI_TCM](ERROR): CRC does not match. Expected:0x31824 got:0x7489
2018-01-20T02:38:03.680Z,1516415883.680 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:38:03.680Z,1516415883.680 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-01-20T02:38:03.680Z,1516415883.680 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:38:03.713Z,1516415883.713 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:38:04.029Z,1516415884.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:04.083Z,1516415884.083 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:38:04.083Z,1516415884.083 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-01-20T02:38:04.434Z,1516415884.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:04.468Z,1516415884.468 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:38:04.468Z,1516415884.468 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:38:04.468Z,1516415884.468 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:38:04.842Z,1516415884.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:05.245Z,1516415885.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:05.251Z,1516415885.251 [PNI_TCM](ERROR): CRC does not match. Expected:0x10580 got:0x49483
2018-01-20T02:38:05.647Z,1516415885.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:06.042Z,1516415886.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:06.435Z,1516415886.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:06.841Z,1516415886.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:07.241Z,1516415887.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:07.631Z,1516415887.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:08.036Z,1516415888.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:08.439Z,1516415888.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:08.838Z,1516415888.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:09.247Z,1516415889.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:09.644Z,1516415889.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:10.045Z,1516415890.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:10.451Z,1516415890.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:10.853Z,1516415890.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:11.242Z,1516415891.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:11.643Z,1516415891.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:12.031Z,1516415892.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:12.427Z,1516415892.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:12.831Z,1516415892.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:13.244Z,1516415893.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:13.629Z,1516415893.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:14.032Z,1516415894.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:14.432Z,1516415894.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:14.829Z,1516415894.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:15.247Z,1516415895.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:15.652Z,1516415895.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:16.037Z,1516415896.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:16.451Z,1516415896.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:16.831Z,1516415896.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:17.229Z,1516415897.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:17.631Z,1516415897.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:18.031Z,1516415898.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:18.435Z,1516415898.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:18.835Z,1516415898.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:19.235Z,1516415899.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:19.639Z,1516415899.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:20.040Z,1516415900.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:20.444Z,1516415900.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:20.846Z,1516415900.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:21.245Z,1516415901.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:21.650Z,1516415901.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:22.026Z,1516415902.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:22.434Z,1516415902.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:22.831Z,1516415902.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:23.235Z,1516415903.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:23.631Z,1516415903.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:24.035Z,1516415904.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:24.435Z,1516415904.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:24.831Z,1516415904.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:25.231Z,1516415905.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:25.637Z,1516415905.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:26.059Z,1516415906.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:26.438Z,1516415906.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:26.853Z,1516415906.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:27.232Z,1516415907.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:27.627Z,1516415907.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:28.034Z,1516415908.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:28.433Z,1516415908.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:28.837Z,1516415908.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:29.233Z,1516415909.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:29.635Z,1516415909.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:30.044Z,1516415910.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:30.433Z,1516415910.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:30.846Z,1516415910.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:31.242Z,1516415911.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:31.672Z,1516415911.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:32.056Z,1516415912.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:32.430Z,1516415912.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:32.838Z,1516415912.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:33.241Z,1516415913.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:33.643Z,1516415913.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:34.041Z,1516415914.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:34.433Z,1516415914.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:34.833Z,1516415914.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:35.241Z,1516415915.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:35.641Z,1516415915.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:36.054Z,1516415916.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:36.459Z,1516415916.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:36.844Z,1516415916.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:37.244Z,1516415917.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:37.650Z,1516415917.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:38.054Z,1516415918.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:38.433Z,1516415918.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:38.838Z,1516415918.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:39.240Z,1516415919.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:39.633Z,1516415919.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:40.033Z,1516415920.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:40.442Z,1516415920.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:40.841Z,1516415920.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:41.252Z,1516415921.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:41.652Z,1516415921.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:42.052Z,1516415922.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:42.453Z,1516415922.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:42.833Z,1516415922.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:43.242Z,1516415923.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:43.638Z,1516415923.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:44.041Z,1516415924.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:44.441Z,1516415924.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:44.842Z,1516415924.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:45.233Z,1516415925.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:45.633Z,1516415925.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:46.033Z,1516415926.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:46.458Z,1516415926.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:49.741Z,1516415929.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:49.856Z,1516415929.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:50.247Z,1516415930.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:50.651Z,1516415930.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:51.048Z,1516415931.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:51.452Z,1516415931.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:51.845Z,1516415931.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:52.236Z,1516415932.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:52.642Z,1516415932.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:53.035Z,1516415933.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:53.434Z,1516415933.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:53.842Z,1516415933.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:54.235Z,1516415934.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:54.634Z,1516415934.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:55.039Z,1516415935.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:55.435Z,1516415935.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:55.853Z,1516415935.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:56.258Z,1516415936.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:56.643Z,1516415936.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:57.035Z,1516415937.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:57.439Z,1516415937.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:57.835Z,1516415937.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:58.242Z,1516415938.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:58.638Z,1516415938.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:59.035Z,1516415939.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:59.443Z,1516415939.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:38:59.839Z,1516415939.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:00.256Z,1516415940.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:00.654Z,1516415940.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:01.039Z,1516415941.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:01.439Z,1516415941.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:01.834Z,1516415941.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:02.239Z,1516415942.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:02.650Z,1516415942.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:03.043Z,1516415943.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:03.451Z,1516415943.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:03.843Z,1516415943.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:04.254Z,1516415944.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:04.654Z,1516415944.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:05.054Z,1516415945.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:05.454Z,1516415945.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:05.833Z,1516415945.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:06.237Z,1516415946.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:06.641Z,1516415946.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:07.039Z,1516415947.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:07.439Z,1516415947.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:07.855Z,1516415947.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:08.247Z,1516415948.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:08.644Z,1516415948.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:09.044Z,1516415949.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:09.450Z,1516415949.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:09.853Z,1516415949.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:10.257Z,1516415950.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:10.657Z,1516415950.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:11.051Z,1516415951.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:11.451Z,1516415951.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:11.839Z,1516415951.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:12.235Z,1516415952.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:12.643Z,1516415952.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:13.043Z,1516415953.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:13.443Z,1516415953.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:13.844Z,1516415953.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:14.239Z,1516415954.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:14.664Z,1516415954.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:15.062Z,1516415955.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:15.449Z,1516415955.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:15.854Z,1516415955.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:16.243Z,1516415956.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:16.647Z,1516415956.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:17.046Z,1516415957.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:17.447Z,1516415957.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:17.848Z,1516415957.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:18.241Z,1516415958.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:18.646Z,1516415958.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:19.047Z,1516415959.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:19.443Z,1516415959.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:19.858Z,1516415959.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:20.258Z,1516415960.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:20.655Z,1516415960.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:21.058Z,1516415961.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:21.439Z,1516415961.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:21.835Z,1516415961.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:21.888Z,1516415961.888 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T02:39:22.238Z,1516415962.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:22.639Z,1516415962.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:23.039Z,1516415963.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:23.443Z,1516415963.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:23.847Z,1516415963.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:24.236Z,1516415964.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:24.637Z,1516415964.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:25.072Z,1516415965.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:25.458Z,1516415965.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:25.855Z,1516415965.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:26.259Z,1516415966.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:26.644Z,1516415966.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:27.037Z,1516415967.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:27.448Z,1516415967.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:27.847Z,1516415967.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:28.239Z,1516415968.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:28.646Z,1516415968.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:29.043Z,1516415969.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:29.434Z,1516415969.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:29.839Z,1516415969.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:30.258Z,1516415970.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:30.646Z,1516415970.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:31.057Z,1516415971.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:31.446Z,1516415971.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:31.835Z,1516415971.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:32.243Z,1516415972.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:32.639Z,1516415972.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:33.040Z,1516415973.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:33.445Z,1516415973.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:33.843Z,1516415973.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:34.238Z,1516415974.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:34.647Z,1516415974.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:35.051Z,1516415975.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:35.462Z,1516415975.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:35.861Z,1516415975.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:36.256Z,1516415976.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:36.658Z,1516415976.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:37.039Z,1516415977.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:37.439Z,1516415977.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:37.835Z,1516415977.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:38.239Z,1516415978.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:38.642Z,1516415978.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:39.036Z,1516415979.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:39.447Z,1516415979.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:39.847Z,1516415979.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:40.242Z,1516415980.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:40.650Z,1516415980.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:41.053Z,1516415981.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:41.461Z,1516415981.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:41.858Z,1516415981.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:42.239Z,1516415982.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:42.634Z,1516415982.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:43.043Z,1516415983.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:43.435Z,1516415983.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:43.835Z,1516415983.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:44.239Z,1516415984.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:44.644Z,1516415984.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:45.040Z,1516415985.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:45.444Z,1516415985.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:45.854Z,1516415985.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:45.890Z,1516415985.890 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T02:34:45.8Z
2018-01-20T02:39:45.890Z,1516415985.890 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T02:39:45.890Z,1516415985.890 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T02:39:46.253Z,1516415986.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:46.720Z,1516415986.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:50.078Z,1516415990.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:50.178Z,1516415990.178 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0144.lzma
2018-01-20T02:39:50.208Z,1516415990.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:50.567Z,1516415990.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:50.931Z,1516415990.931 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0144.lzma.bak
2018-01-20T02:39:50.931Z,1516415990.931 [DataOverHttps](INFO): SBD MOMSN=7725936
2018-01-20T02:39:50.973Z,1516415990.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:51.524Z,1516415991.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:51.766Z,1516415991.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:55.063Z,1516415995.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:55.188Z,1516415995.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:55.542Z,1516415995.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:55.944Z,1516415995.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:56.366Z,1516415996.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:39:56.762Z,1516415996.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:00.030Z,1516416000.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:00.122Z,1516416000.122 [DataOverHttps](INFO): Sending 236 bytes from file Logs/20180119T210901/Express0145.lzma
2018-01-20T02:40:00.159Z,1516416000.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:00.539Z,1516416000.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:00.915Z,1516416000.915 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0145.lzma.bak
2018-01-20T02:40:00.915Z,1516416000.915 [DataOverHttps](INFO): SBD MOMSN=7725938
2018-01-20T02:40:00.939Z,1516416000.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:01.464Z,1516416001.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:01.490Z,1516416001.490 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T02:40:01.490Z,1516416001.490 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T02:40:01.490Z,1516416001.490 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T02:40:01.762Z,1516416001.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:04.999Z,1516416004.999 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T02:40:05.033Z,1516416005.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:05.150Z,1516416005.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:05.541Z,1516416005.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:05.949Z,1516416005.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:06.343Z,1516416006.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:06.747Z,1516416006.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:07.147Z,1516416007.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:07.543Z,1516416007.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:07.943Z,1516416007.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:08.347Z,1516416008.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:08.743Z,1516416008.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:09.153Z,1516416009.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:09.552Z,1516416009.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:09.943Z,1516416009.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:10.342Z,1516416010.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:10.737Z,1516416010.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:11.148Z,1516416011.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:11.553Z,1516416011.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:11.935Z,1516416011.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:12.339Z,1516416012.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:12.734Z,1516416012.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:13.132Z,1516416013.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:13.535Z,1516416013.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:13.938Z,1516416013.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:14.338Z,1516416014.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:14.735Z,1516416014.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:15.138Z,1516416015.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:15.536Z,1516416015.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:15.947Z,1516416015.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:16.347Z,1516416016.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:16.742Z,1516416016.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:17.144Z,1516416017.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:17.544Z,1516416017.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:17.930Z,1516416017.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:18.335Z,1516416018.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:18.736Z,1516416018.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:19.130Z,1516416019.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:19.536Z,1516416019.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:19.934Z,1516416019.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:20.336Z,1516416020.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:20.736Z,1516416020.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:21.136Z,1516416021.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:21.536Z,1516416021.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:21.938Z,1516416021.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:22.336Z,1516416022.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:22.735Z,1516416022.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:23.135Z,1516416023.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:23.534Z,1516416023.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:23.932Z,1516416023.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:24.335Z,1516416024.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:24.734Z,1516416024.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:25.135Z,1516416025.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:25.547Z,1516416025.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:25.955Z,1516416025.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:26.335Z,1516416026.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:26.747Z,1516416026.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:27.134Z,1516416027.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:27.535Z,1516416027.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:27.948Z,1516416027.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:28.354Z,1516416028.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:28.732Z,1516416028.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:29.139Z,1516416029.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:29.539Z,1516416029.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:29.939Z,1516416029.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:30.347Z,1516416030.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:30.744Z,1516416030.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:31.140Z,1516416031.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:31.544Z,1516416031.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:31.943Z,1516416031.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:32.346Z,1516416032.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:32.746Z,1516416032.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:33.148Z,1516416033.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:33.546Z,1516416033.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:33.949Z,1516416033.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:34.342Z,1516416034.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:34.740Z,1516416034.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:35.150Z,1516416035.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:35.522Z,1516416035.522 [NAL9602](INFO): Powering down
2018-01-20T02:40:35.563Z,1516416035.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:35.938Z,1516416035.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:36.347Z,1516416036.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:36.747Z,1516416036.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:37.132Z,1516416037.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:37.543Z,1516416037.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:37.943Z,1516416037.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:38.339Z,1516416038.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:38.739Z,1516416038.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:39.143Z,1516416039.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:39.539Z,1516416039.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:39.939Z,1516416039.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:40.343Z,1516416040.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:40.735Z,1516416040.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:41.139Z,1516416041.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:41.543Z,1516416041.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:41.936Z,1516416041.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:42.347Z,1516416042.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:42.740Z,1516416042.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:43.144Z,1516416043.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:43.545Z,1516416043.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:43.949Z,1516416043.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:44.348Z,1516416044.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:44.747Z,1516416044.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:45.148Z,1516416045.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:45.543Z,1516416045.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:45.948Z,1516416045.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:46.351Z,1516416046.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:46.747Z,1516416046.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:47.147Z,1516416047.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:47.551Z,1516416047.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:47.935Z,1516416047.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:48.348Z,1516416048.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:48.752Z,1516416048.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:49.135Z,1516416049.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:49.533Z,1516416049.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:49.951Z,1516416049.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:50.335Z,1516416050.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:50.732Z,1516416050.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:51.139Z,1516416051.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:51.539Z,1516416051.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:51.932Z,1516416051.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:52.343Z,1516416052.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:52.735Z,1516416052.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:53.138Z,1516416053.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:53.544Z,1516416053.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:53.938Z,1516416053.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:54.342Z,1516416054.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:54.744Z,1516416054.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:55.144Z,1516416055.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:55.544Z,1516416055.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:55.948Z,1516416055.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:56.345Z,1516416056.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:56.745Z,1516416056.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:57.149Z,1516416057.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:57.544Z,1516416057.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:57.945Z,1516416057.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:58.353Z,1516416058.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:58.747Z,1516416058.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:59.132Z,1516416059.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:59.554Z,1516416059.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:40:59.946Z,1516416059.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:00.332Z,1516416060.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:00.739Z,1516416060.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:01.137Z,1516416061.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:01.551Z,1516416061.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:01.935Z,1516416061.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:05.215Z,1516416065.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:05.234Z,1516416065.234 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:41:05.234Z,1516416065.234 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-01-20T02:41:05.234Z,1516416065.234 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:41:05.270Z,1516416065.270 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:41:05.355Z,1516416065.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:05.400Z,1516416065.400 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:41:05.400Z,1516416065.400 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-01-20T02:41:05.703Z,1516416065.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:05.741Z,1516416065.741 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:41:05.742Z,1516416065.742 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:41:05.742Z,1516416065.742 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:41:06.108Z,1516416066.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:06.504Z,1516416066.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:06.912Z,1516416066.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:07.313Z,1516416067.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:07.702Z,1516416067.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:08.115Z,1516416068.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:08.506Z,1516416068.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:08.906Z,1516416068.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:09.305Z,1516416069.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:09.706Z,1516416069.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:10.106Z,1516416070.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:10.506Z,1516416070.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:10.915Z,1516416070.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:11.309Z,1516416071.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:11.710Z,1516416071.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:12.107Z,1516416072.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:12.507Z,1516416072.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:12.906Z,1516416072.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:13.299Z,1516416073.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:13.700Z,1516416073.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:14.106Z,1516416074.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:14.499Z,1516416074.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:14.899Z,1516416074.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:15.319Z,1516416075.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:15.699Z,1516416075.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:16.099Z,1516416076.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:16.506Z,1516416076.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:16.899Z,1516416076.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:17.299Z,1516416077.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:17.706Z,1516416077.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:18.099Z,1516416078.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:18.499Z,1516416078.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:18.902Z,1516416078.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:19.299Z,1516416079.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:19.699Z,1516416079.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:20.103Z,1516416080.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:20.499Z,1516416080.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:20.900Z,1516416080.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:21.303Z,1516416081.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:21.699Z,1516416081.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:22.106Z,1516416082.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:22.503Z,1516416082.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:22.907Z,1516416082.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:23.310Z,1516416083.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:23.707Z,1516416083.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:24.105Z,1516416084.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:24.511Z,1516416084.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:24.909Z,1516416084.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:25.311Z,1516416085.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:25.708Z,1516416085.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:26.111Z,1516416086.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:26.506Z,1516416086.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:26.907Z,1516416086.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:27.312Z,1516416087.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:27.713Z,1516416087.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:28.113Z,1516416088.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:28.509Z,1516416088.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:28.906Z,1516416088.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:29.306Z,1516416089.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:29.706Z,1516416089.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:30.114Z,1516416090.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:30.514Z,1516416090.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:30.906Z,1516416090.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:31.306Z,1516416091.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:31.708Z,1516416091.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:32.105Z,1516416092.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:32.514Z,1516416092.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:32.900Z,1516416092.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:33.319Z,1516416093.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:33.699Z,1516416093.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:34.099Z,1516416094.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:34.515Z,1516416094.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:34.899Z,1516416094.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:35.314Z,1516416095.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:35.706Z,1516416095.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:36.115Z,1516416096.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:36.515Z,1516416096.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:36.903Z,1516416096.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:37.303Z,1516416097.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:37.715Z,1516416097.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:38.103Z,1516416098.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:38.499Z,1516416098.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:38.896Z,1516416098.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:39.307Z,1516416099.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:39.699Z,1516416099.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:40.106Z,1516416100.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:40.503Z,1516416100.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:40.899Z,1516416100.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:41.306Z,1516416101.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:41.703Z,1516416101.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:42.106Z,1516416102.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:42.506Z,1516416102.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:42.907Z,1516416102.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:43.303Z,1516416103.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:43.701Z,1516416103.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:44.111Z,1516416104.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:44.504Z,1516416104.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:44.905Z,1516416104.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:45.307Z,1516416105.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:45.707Z,1516416105.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:46.107Z,1516416106.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:46.506Z,1516416106.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:46.907Z,1516416106.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:47.306Z,1516416107.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:47.711Z,1516416107.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:48.111Z,1516416108.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:48.507Z,1516416108.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:48.912Z,1516416108.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:49.308Z,1516416109.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:49.707Z,1516416109.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:50.106Z,1516416110.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:50.506Z,1516416110.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:50.906Z,1516416110.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:51.306Z,1516416111.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:51.706Z,1516416111.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:52.106Z,1516416112.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:52.515Z,1516416112.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:52.906Z,1516416112.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:53.306Z,1516416113.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:53.707Z,1516416113.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:54.114Z,1516416114.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:54.506Z,1516416114.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:54.905Z,1516416114.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:55.306Z,1516416115.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:55.708Z,1516416115.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:56.107Z,1516416116.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:56.514Z,1516416116.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:56.908Z,1516416116.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:57.310Z,1516416117.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:57.706Z,1516416117.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:58.114Z,1516416118.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:58.507Z,1516416118.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:58.914Z,1516416118.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:59.314Z,1516416119.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:41:59.706Z,1516416119.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:00.106Z,1516416120.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:00.514Z,1516416120.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:00.910Z,1516416120.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:01.314Z,1516416121.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:01.709Z,1516416121.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:02.107Z,1516416122.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:05.369Z,1516416125.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:05.482Z,1516416125.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:05.876Z,1516416125.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:06.280Z,1516416126.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:06.671Z,1516416126.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:07.074Z,1516416127.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:07.470Z,1516416127.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:07.870Z,1516416127.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:08.281Z,1516416128.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:08.678Z,1516416128.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:09.060Z,1516416129.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:09.478Z,1516416129.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:09.867Z,1516416129.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:10.264Z,1516416130.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:10.662Z,1516416130.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:11.071Z,1516416131.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:11.472Z,1516416131.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:11.879Z,1516416131.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:12.274Z,1516416132.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:12.674Z,1516416132.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:13.074Z,1516416133.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:13.472Z,1516416133.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:13.872Z,1516416133.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:14.274Z,1516416134.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:14.678Z,1516416134.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:15.064Z,1516416135.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:15.462Z,1516416135.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:15.863Z,1516416135.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:16.264Z,1516416136.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:16.685Z,1516416136.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:17.078Z,1516416137.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:17.478Z,1516416137.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:17.862Z,1516416137.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:18.274Z,1516416138.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:18.664Z,1516416138.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:19.074Z,1516416139.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:19.478Z,1516416139.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:19.864Z,1516416139.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:20.278Z,1516416140.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:20.679Z,1516416140.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:21.064Z,1516416141.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:21.474Z,1516416141.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:21.883Z,1516416141.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:22.264Z,1516416142.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:22.666Z,1516416142.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:23.071Z,1516416143.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:23.470Z,1516416143.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:23.867Z,1516416143.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:24.271Z,1516416144.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:24.672Z,1516416144.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:25.078Z,1516416145.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:25.475Z,1516416145.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:25.874Z,1516416145.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:26.274Z,1516416146.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:26.670Z,1516416146.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:27.064Z,1516416147.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:27.466Z,1516416147.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:27.871Z,1516416147.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:28.267Z,1516416148.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:28.670Z,1516416148.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:29.071Z,1516416149.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:29.470Z,1516416149.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:29.866Z,1516416149.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:30.275Z,1516416150.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:30.668Z,1516416150.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:31.082Z,1516416151.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:31.479Z,1516416151.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:31.867Z,1516416151.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:32.270Z,1516416152.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:32.667Z,1516416152.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:33.064Z,1516416153.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:33.466Z,1516416153.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:33.875Z,1516416153.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:34.272Z,1516416154.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:34.674Z,1516416154.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:35.076Z,1516416155.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:35.475Z,1516416155.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:35.870Z,1516416155.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:36.280Z,1516416156.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:36.666Z,1516416156.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:37.070Z,1516416157.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:37.467Z,1516416157.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:37.863Z,1516416157.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:38.266Z,1516416158.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:38.664Z,1516416158.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:39.070Z,1516416159.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:39.470Z,1516416159.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:39.875Z,1516416159.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:40.275Z,1516416160.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:40.677Z,1516416160.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:41.070Z,1516416161.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:41.467Z,1516416161.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:41.876Z,1516416161.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:42.276Z,1516416162.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:42.671Z,1516416162.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:43.075Z,1516416163.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:43.479Z,1516416163.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:43.863Z,1516416163.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:44.274Z,1516416164.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:44.664Z,1516416164.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:45.063Z,1516416165.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:45.466Z,1516416165.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:45.860Z,1516416165.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:46.267Z,1516416166.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:46.670Z,1516416166.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:47.067Z,1516416167.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:47.475Z,1516416167.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:47.871Z,1516416167.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:48.267Z,1516416168.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:48.671Z,1516416168.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:49.071Z,1516416169.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:49.474Z,1516416169.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:49.874Z,1516416169.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:50.274Z,1516416170.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:50.674Z,1516416170.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:51.074Z,1516416171.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:51.474Z,1516416171.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:51.872Z,1516416171.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:52.278Z,1516416172.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:52.674Z,1516416172.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:53.071Z,1516416173.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:53.474Z,1516416173.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:53.874Z,1516416173.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:54.278Z,1516416174.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:54.678Z,1516416174.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:55.074Z,1516416175.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:55.479Z,1516416175.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:55.894Z,1516416175.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:56.268Z,1516416176.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:56.677Z,1516416176.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:57.069Z,1516416177.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:57.469Z,1516416177.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:57.882Z,1516416177.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:58.269Z,1516416178.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:58.672Z,1516416178.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:59.082Z,1516416179.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:59.470Z,1516416179.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:42:59.877Z,1516416179.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:00.268Z,1516416180.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:00.695Z,1516416180.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:01.068Z,1516416181.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:01.486Z,1516416181.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:01.876Z,1516416181.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:02.280Z,1516416182.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:09.031Z,1516416189.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:09.179Z,1516416189.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:09.560Z,1516416189.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:09.987Z,1516416189.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:10.396Z,1516416190.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:10.751Z,1516416190.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:11.148Z,1516416191.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:11.559Z,1516416191.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:11.958Z,1516416191.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:12.359Z,1516416192.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:12.760Z,1516416192.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:13.159Z,1516416193.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:13.554Z,1516416193.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:13.957Z,1516416193.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:14.362Z,1516416194.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:14.756Z,1516416194.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:15.157Z,1516416195.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:15.554Z,1516416195.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:15.954Z,1516416195.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:16.367Z,1516416196.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:16.754Z,1516416196.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:17.148Z,1516416197.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:17.562Z,1516416197.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:17.971Z,1516416197.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:18.359Z,1516416198.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:18.756Z,1516416198.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:19.154Z,1516416199.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:19.563Z,1516416199.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:19.951Z,1516416199.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:20.351Z,1516416200.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:20.762Z,1516416200.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:21.151Z,1516416201.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:21.551Z,1516416201.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:21.947Z,1516416201.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:22.351Z,1516416202.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:22.751Z,1516416202.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:23.147Z,1516416203.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:23.551Z,1516416203.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:23.952Z,1516416203.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:24.347Z,1516416204.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:24.748Z,1516416204.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:25.163Z,1516416205.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:25.557Z,1516416205.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:25.951Z,1516416205.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:26.358Z,1516416206.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:26.760Z,1516416206.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:27.151Z,1516416207.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:27.565Z,1516416207.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:27.955Z,1516416207.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:28.354Z,1516416208.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:28.754Z,1516416208.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:29.147Z,1516416209.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:29.547Z,1516416209.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:29.954Z,1516416209.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:30.362Z,1516416210.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:30.744Z,1516416210.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:31.151Z,1516416211.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:31.554Z,1516416211.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:31.948Z,1516416211.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:32.351Z,1516416212.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:32.747Z,1516416212.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:33.144Z,1516416213.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:33.551Z,1516416213.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:33.947Z,1516416213.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:34.354Z,1516416214.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:34.751Z,1516416214.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:35.155Z,1516416215.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:35.551Z,1516416215.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:35.955Z,1516416215.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:36.358Z,1516416216.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:36.756Z,1516416216.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:37.155Z,1516416217.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:37.554Z,1516416217.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:37.954Z,1516416217.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:38.357Z,1516416218.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:38.754Z,1516416218.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:39.156Z,1516416219.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:39.557Z,1516416219.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:39.954Z,1516416219.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:40.356Z,1516416220.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:40.757Z,1516416220.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:41.154Z,1516416221.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:41.554Z,1516416221.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:41.957Z,1516416221.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:42.354Z,1516416222.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:42.754Z,1516416222.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:43.157Z,1516416223.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:43.554Z,1516416223.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:43.952Z,1516416223.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:44.354Z,1516416224.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:44.754Z,1516416224.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:45.154Z,1516416225.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:45.554Z,1516416225.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:45.959Z,1516416225.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:46.354Z,1516416226.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:46.754Z,1516416226.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:47.154Z,1516416227.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:47.555Z,1516416227.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:47.954Z,1516416227.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:48.362Z,1516416228.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:48.748Z,1516416228.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:49.154Z,1516416229.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:49.547Z,1516416229.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:49.948Z,1516416229.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:50.354Z,1516416230.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:50.747Z,1516416230.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:51.144Z,1516416231.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:51.563Z,1516416231.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:51.947Z,1516416231.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:52.362Z,1516416232.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:52.751Z,1516416232.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:53.151Z,1516416233.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:53.547Z,1516416233.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:53.962Z,1516416233.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:54.347Z,1516416234.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:54.747Z,1516416234.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:55.163Z,1516416235.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:55.547Z,1516416235.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:55.948Z,1516416235.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:56.355Z,1516416236.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:56.747Z,1516416236.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:57.145Z,1516416237.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:57.551Z,1516416237.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:57.955Z,1516416237.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:58.355Z,1516416238.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:58.759Z,1516416238.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:59.156Z,1516416239.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:59.556Z,1516416239.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:43:59.963Z,1516416239.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:00.354Z,1516416240.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:00.751Z,1516416240.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:01.163Z,1516416241.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:01.554Z,1516416241.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:01.955Z,1516416241.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:02.357Z,1516416242.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:05.623Z,1516416245.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:05.752Z,1516416245.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:05.788Z,1516416245.788 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:44:05.788Z,1516416245.788 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-01-20T02:44:05.788Z,1516416245.788 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:44:05.829Z,1516416245.829 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:44:06.127Z,1516416246.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:06.186Z,1516416246.186 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:44:06.186Z,1516416246.186 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-01-20T02:44:06.523Z,1516416246.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:06.541Z,1516416246.541 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:44:06.541Z,1516416246.541 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:44:06.541Z,1516416246.541 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:44:06.920Z,1516416246.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:07.328Z,1516416247.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:07.723Z,1516416247.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:08.123Z,1516416248.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:08.528Z,1516416248.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:08.923Z,1516416248.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:09.323Z,1516416249.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:09.732Z,1516416249.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:10.123Z,1516416250.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:10.527Z,1516416250.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:10.935Z,1516416250.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:11.327Z,1516416251.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:11.712Z,1516416251.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:12.115Z,1516416252.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:12.515Z,1516416252.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:12.913Z,1516416252.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:13.318Z,1516416253.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:13.715Z,1516416253.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:14.119Z,1516416254.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:14.523Z,1516416254.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:14.915Z,1516416254.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:15.312Z,1516416255.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:15.723Z,1516416255.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:16.115Z,1516416256.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:16.518Z,1516416256.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:16.919Z,1516416256.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:17.319Z,1516416257.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:17.716Z,1516416257.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:18.131Z,1516416258.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:18.519Z,1516416258.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:18.916Z,1516416258.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:19.325Z,1516416259.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:19.721Z,1516416259.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:20.119Z,1516416260.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:20.525Z,1516416260.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:20.924Z,1516416260.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:21.326Z,1516416261.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:21.730Z,1516416261.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:22.125Z,1516416262.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:22.526Z,1516416262.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:22.932Z,1516416262.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:23.324Z,1516416263.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:23.722Z,1516416263.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:24.122Z,1516416264.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:24.522Z,1516416264.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:24.912Z,1516416264.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:25.326Z,1516416265.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:25.715Z,1516416265.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:26.127Z,1516416266.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:26.514Z,1516416266.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:26.927Z,1516416266.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:27.327Z,1516416267.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:27.735Z,1516416267.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:28.115Z,1516416268.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:28.515Z,1516416268.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:28.914Z,1516416268.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:29.318Z,1516416269.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:29.712Z,1516416269.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:30.118Z,1516416270.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:30.518Z,1516416270.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:30.912Z,1516416270.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:31.318Z,1516416271.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:31.718Z,1516416271.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:32.119Z,1516416272.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:32.523Z,1516416272.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:32.919Z,1516416272.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:33.315Z,1516416273.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:33.720Z,1516416273.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:34.122Z,1516416274.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:34.524Z,1516416274.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:34.924Z,1516416274.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:35.322Z,1516416275.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:35.720Z,1516416275.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:36.122Z,1516416276.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:36.522Z,1516416276.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:36.920Z,1516416276.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:37.324Z,1516416277.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:37.724Z,1516416277.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:38.126Z,1516416278.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:38.523Z,1516416278.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:38.926Z,1516416278.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:39.327Z,1516416279.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:39.730Z,1516416279.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:40.127Z,1516416280.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:40.527Z,1516416280.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:40.927Z,1516416280.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:41.327Z,1516416281.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:41.720Z,1516416281.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:42.132Z,1516416282.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:42.526Z,1516416282.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:42.912Z,1516416282.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:43.322Z,1516416283.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:43.727Z,1516416283.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:44.112Z,1516416284.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:44.514Z,1516416284.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:44.919Z,1516416284.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:45.318Z,1516416285.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:45.714Z,1516416285.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:46.119Z,1516416286.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:46.515Z,1516416286.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:46.931Z,1516416286.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:47.319Z,1516416287.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:47.715Z,1516416287.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:48.118Z,1516416288.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:48.519Z,1516416288.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:48.912Z,1516416288.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:49.318Z,1516416289.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:49.719Z,1516416289.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:50.112Z,1516416290.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:50.522Z,1516416290.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:50.919Z,1516416290.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:51.321Z,1516416291.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:51.720Z,1516416291.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:52.125Z,1516416292.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:52.524Z,1516416292.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:52.924Z,1516416292.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:53.329Z,1516416293.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:53.724Z,1516416293.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:54.129Z,1516416294.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:54.527Z,1516416294.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:54.924Z,1516416294.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:55.323Z,1516416295.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:55.728Z,1516416295.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:56.123Z,1516416296.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:56.530Z,1516416296.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:56.928Z,1516416296.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:57.324Z,1516416297.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:57.724Z,1516416297.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:58.132Z,1516416298.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:58.524Z,1516416298.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:58.929Z,1516416298.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:59.325Z,1516416299.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:44:59.728Z,1516416299.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:00.126Z,1516416300.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:00.530Z,1516416300.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:00.925Z,1516416300.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:01.335Z,1516416301.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:01.710Z,1516416301.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:02.129Z,1516416302.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:02.150Z,1516416302.150 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T02:45:02.150Z,1516416302.150 [Default:CheckIn:C.Wait] Stopped
2018-01-20T02:45:02.150Z,1516416302.150 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T02:45:02.151Z,1516416302.151 [Default:CheckIn:D] Running Loop=1
2018-01-20T02:45:02.524Z,1516416302.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:02.550Z,1516416302.550 [Default:CheckIn:D] Stopped
2018-01-20T02:45:02.550Z,1516416302.550 [Default:CheckIn:E] Running Loop=1
2018-01-20T02:45:05.791Z,1516416305.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:05.812Z,1516416305.812 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.432064 min 
2018-01-20T02:45:05.845Z,1516416305.845 [Default:CheckIn:E] Stopped
2018-01-20T02:45:05.845Z,1516416305.845 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T02:45:05.845Z,1516416305.845 [Default:CheckIn] Stopped
2018-01-20T02:45:05.845Z,1516416305.845 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T02:45:05.845Z,1516416305.845 [Default:CheckIn](INFO): Running loop #5
2018-01-20T02:45:05.845Z,1516416305.845 [Default:CheckIn] Running Loop=5
2018-01-20T02:45:05.845Z,1516416305.845 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T02:45:05.846Z,1516416305.846 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T02:45:05.939Z,1516416305.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:06.298Z,1516416306.298 [NAL9602](INFO): Powering up
2018-01-20T02:45:06.317Z,1516416306.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:06.723Z,1516416306.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:07.108Z,1516416307.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:07.510Z,1516416307.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:07.920Z,1516416307.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:08.318Z,1516416308.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:08.723Z,1516416308.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:09.123Z,1516416309.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:09.515Z,1516416309.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:09.915Z,1516416309.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:10.323Z,1516416310.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:10.719Z,1516416310.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:11.118Z,1516416311.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:11.524Z,1516416311.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:11.918Z,1516416311.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:12.318Z,1516416312.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:12.718Z,1516416312.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:13.124Z,1516416313.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:13.511Z,1516416313.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:13.923Z,1516416313.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:14.307Z,1516416314.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:14.726Z,1516416314.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:15.112Z,1516416315.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:15.510Z,1516416315.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:15.912Z,1516416315.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:16.327Z,1516416316.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:16.713Z,1516416316.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:17.131Z,1516416317.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:17.494Z,1516416317.494 [NAL9602](INFO): NAL9602 initialized
2018-01-20T02:45:17.512Z,1516416317.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:17.914Z,1516416317.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:18.299Z,1516416318.299 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T02:45:18.299Z,1516416318.299 [NAL9602] Data Fault, FailCount= 2
2018-01-20T02:45:18.299Z,1516416318.299 [NAL9602](ERROR): Data Fault
2018-01-20T02:45:18.317Z,1516416318.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:18.386Z,1516416318.386 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T02:45:18.693Z,1516416318.693 [NAL9602](INFO): Powering down
2018-01-20T02:45:18.713Z,1516416318.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:19.108Z,1516416319.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:19.515Z,1516416319.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:19.521Z,1516416319.521 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2018-01-20T02:45:19.575Z,1516416319.575 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T02:45:19.575Z,1516416319.575 [NAL9602] No Fault, FailCount= 2
2018-01-20T02:45:19.909Z,1516416319.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:20.312Z,1516416320.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:20.722Z,1516416320.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:21.104Z,1516416321.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:21.520Z,1516416321.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:21.527Z,1516416321.527 [PNI_TCM](ERROR): CRC does not match. Expected:0x22413 got:0x49483
2018-01-20T02:45:21.921Z,1516416321.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:22.311Z,1516416322.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:22.715Z,1516416322.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:23.118Z,1516416323.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:23.522Z,1516416323.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:23.923Z,1516416323.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:24.316Z,1516416324.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:24.717Z,1516416324.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:25.116Z,1516416325.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:25.529Z,1516416325.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:25.904Z,1516416325.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:26.326Z,1516416326.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:26.720Z,1516416326.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:27.116Z,1516416327.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:27.514Z,1516416327.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:27.921Z,1516416327.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:28.321Z,1516416328.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:28.714Z,1516416328.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:29.118Z,1516416329.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:29.507Z,1516416329.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:29.917Z,1516416329.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:30.318Z,1516416330.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:30.708Z,1516416330.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:31.106Z,1516416331.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:31.513Z,1516416331.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:31.908Z,1516416331.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:32.315Z,1516416332.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:32.716Z,1516416332.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:33.113Z,1516416333.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:33.514Z,1516416333.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:33.913Z,1516416333.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:34.321Z,1516416334.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:34.724Z,1516416334.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:35.117Z,1516416335.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:35.515Z,1516416335.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:35.923Z,1516416335.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:36.316Z,1516416336.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:36.716Z,1516416336.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:37.122Z,1516416337.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:37.518Z,1516416337.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:37.918Z,1516416337.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:38.323Z,1516416338.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:38.718Z,1516416338.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:39.114Z,1516416339.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:39.526Z,1516416339.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:39.918Z,1516416339.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:40.314Z,1516416340.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:40.717Z,1516416340.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:41.119Z,1516416341.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:41.522Z,1516416341.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:41.923Z,1516416341.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:42.317Z,1516416342.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:42.714Z,1516416342.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:43.123Z,1516416343.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:43.517Z,1516416343.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:43.904Z,1516416343.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:44.317Z,1516416344.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:44.717Z,1516416344.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:45.104Z,1516416345.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:45.517Z,1516416345.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:45.923Z,1516416345.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:46.319Z,1516416346.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:46.720Z,1516416346.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:47.115Z,1516416347.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:47.515Z,1516416347.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:47.920Z,1516416347.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:48.317Z,1516416348.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:48.704Z,1516416348.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:49.094Z,1516416349.094 [NAL9602](INFO): Powering up NAL9602
2018-01-20T02:45:49.123Z,1516416349.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:49.523Z,1516416349.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:49.907Z,1516416349.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:50.314Z,1516416350.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:50.714Z,1516416350.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:51.107Z,1516416351.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:51.511Z,1516416351.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:51.911Z,1516416351.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:52.306Z,1516416352.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:52.715Z,1516416352.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:53.111Z,1516416353.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:53.506Z,1516416353.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:53.908Z,1516416353.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:54.311Z,1516416354.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:54.711Z,1516416354.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:55.113Z,1516416355.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:55.516Z,1516416355.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:55.918Z,1516416355.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:56.317Z,1516416356.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:56.724Z,1516416356.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:57.115Z,1516416357.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:57.515Z,1516416357.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:57.914Z,1516416357.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:58.315Z,1516416358.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:58.711Z,1516416358.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:59.121Z,1516416359.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:59.514Z,1516416359.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:45:59.927Z,1516416359.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:00.294Z,1516416360.294 [NAL9602](INFO): NAL9602 initialized
2018-01-20T02:46:00.314Z,1516416360.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:00.707Z,1516416360.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:01.126Z,1516416361.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:01.527Z,1516416361.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:01.936Z,1516416361.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:02.316Z,1516416362.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:02.720Z,1516416362.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:06.003Z,1516416366.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:06.145Z,1516416366.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:06.511Z,1516416366.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:06.910Z,1516416366.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:07.305Z,1516416367.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:07.701Z,1516416367.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:08.100Z,1516416368.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:08.500Z,1516416368.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:08.901Z,1516416368.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:09.301Z,1516416369.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:09.705Z,1516416369.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:10.101Z,1516416370.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:10.489Z,1516416370.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:10.912Z,1516416370.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:11.312Z,1516416371.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:11.713Z,1516416371.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:12.104Z,1516416372.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:12.506Z,1516416372.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:12.905Z,1516416372.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:13.291Z,1516416373.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:13.702Z,1516416373.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:14.109Z,1516416374.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:14.490Z,1516416374.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:14.898Z,1516416374.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:15.294Z,1516416375.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:15.688Z,1516416375.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:16.104Z,1516416376.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:16.504Z,1516416376.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:16.904Z,1516416376.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:17.303Z,1516416377.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:17.696Z,1516416377.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:18.092Z,1516416378.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:18.499Z,1516416378.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:18.905Z,1516416378.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:19.306Z,1516416379.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:19.701Z,1516416379.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:20.098Z,1516416380.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:20.501Z,1516416380.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:20.894Z,1516416380.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:21.308Z,1516416381.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:21.708Z,1516416381.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:22.112Z,1516416382.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:22.508Z,1516416382.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:22.888Z,1516416382.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:23.292Z,1516416383.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:23.704Z,1516416383.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:24.088Z,1516416384.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:24.493Z,1516416384.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:24.889Z,1516416384.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:25.288Z,1516416385.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:25.701Z,1516416385.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:26.089Z,1516416386.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:26.508Z,1516416386.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:26.912Z,1516416386.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:27.308Z,1516416387.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:27.708Z,1516416387.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:28.092Z,1516416388.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:28.489Z,1516416388.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:28.890Z,1516416388.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:29.297Z,1516416389.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:29.693Z,1516416389.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:30.097Z,1516416390.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:30.492Z,1516416390.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:30.893Z,1516416390.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:31.296Z,1516416391.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:31.703Z,1516416391.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:32.103Z,1516416392.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:32.503Z,1516416392.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:32.906Z,1516416392.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:33.293Z,1516416393.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:33.693Z,1516416393.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:34.097Z,1516416394.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:34.502Z,1516416394.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:34.898Z,1516416394.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:35.301Z,1516416395.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:35.706Z,1516416395.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:36.105Z,1516416396.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:36.505Z,1516416396.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:36.910Z,1516416396.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:37.310Z,1516416397.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:37.707Z,1516416397.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:38.112Z,1516416398.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:38.501Z,1516416398.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:38.901Z,1516416398.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:39.305Z,1516416399.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:39.690Z,1516416399.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:40.105Z,1516416400.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:40.489Z,1516416400.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:40.890Z,1516416400.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:41.293Z,1516416401.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:41.689Z,1516416401.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:42.109Z,1516416402.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:42.512Z,1516416402.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:42.913Z,1516416402.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:43.309Z,1516416403.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:43.692Z,1516416403.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:44.105Z,1516416404.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:44.489Z,1516416404.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:44.906Z,1516416404.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:45.289Z,1516416405.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:45.690Z,1516416405.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:46.101Z,1516416406.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:46.506Z,1516416406.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:46.886Z,1516416406.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:47.315Z,1516416407.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:47.712Z,1516416407.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:48.109Z,1516416408.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:48.512Z,1516416408.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:48.904Z,1516416408.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:49.292Z,1516416409.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:49.693Z,1516416409.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:50.093Z,1516416410.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:50.494Z,1516416410.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:50.893Z,1516416410.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:51.296Z,1516416411.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:51.687Z,1516416411.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:52.098Z,1516416412.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:52.506Z,1516416412.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:52.905Z,1516416412.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:53.307Z,1516416413.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:53.707Z,1516416413.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:54.094Z,1516416414.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:54.498Z,1516416414.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:54.905Z,1516416414.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:55.299Z,1516416415.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:55.702Z,1516416415.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:56.102Z,1516416416.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:56.497Z,1516416416.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:56.903Z,1516416416.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:57.305Z,1516416417.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:57.711Z,1516416417.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:58.110Z,1516416418.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:58.512Z,1516416418.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:58.912Z,1516416418.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:59.309Z,1516416419.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:46:59.703Z,1516416419.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:00.107Z,1516416420.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:00.509Z,1516416420.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:00.904Z,1516416420.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:01.291Z,1516416421.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:01.713Z,1516416421.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:02.094Z,1516416422.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:02.496Z,1516416422.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:02.910Z,1516416422.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:06.174Z,1516416426.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:06.313Z,1516416426.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:06.682Z,1516416426.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:06.701Z,1516416426.701 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:47:06.701Z,1516416426.701 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-01-20T02:47:06.701Z,1516416426.701 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:47:06.731Z,1516416426.731 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:47:07.083Z,1516416427.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:07.148Z,1516416427.148 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:47:07.148Z,1516416427.148 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-01-20T02:47:07.479Z,1516416427.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:07.497Z,1516416427.497 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:47:07.497Z,1516416427.497 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:47:07.498Z,1516416427.498 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:47:07.888Z,1516416427.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:08.290Z,1516416428.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:08.665Z,1516416428.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:09.082Z,1516416429.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:09.467Z,1516416429.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:09.865Z,1516416429.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:10.271Z,1516416430.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:10.678Z,1516416430.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:11.082Z,1516416431.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:11.482Z,1516416431.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:11.882Z,1516416431.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:12.271Z,1516416432.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:12.671Z,1516416432.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:13.067Z,1516416433.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:13.467Z,1516416433.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:13.875Z,1516416433.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:14.271Z,1516416434.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:14.669Z,1516416434.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:15.075Z,1516416435.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:15.471Z,1516416435.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:15.882Z,1516416435.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:16.282Z,1516416436.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:16.686Z,1516416436.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:17.082Z,1516416437.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:17.471Z,1516416437.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:17.875Z,1516416437.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:18.273Z,1516416438.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:18.679Z,1516416438.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:19.076Z,1516416439.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:19.479Z,1516416439.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:19.878Z,1516416439.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:20.280Z,1516416440.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:20.675Z,1516416440.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:21.082Z,1516416441.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:21.485Z,1516416441.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:21.885Z,1516416441.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:22.289Z,1516416442.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:22.684Z,1516416442.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:23.064Z,1516416443.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:23.474Z,1516416443.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:23.867Z,1516416443.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:24.283Z,1516416444.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:24.674Z,1516416444.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:25.083Z,1516416445.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:25.468Z,1516416445.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:25.883Z,1516416445.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:26.291Z,1516416446.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:26.682Z,1516416446.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:27.090Z,1516416447.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:27.491Z,1516416447.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:27.868Z,1516416447.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:28.271Z,1516416448.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:28.672Z,1516416448.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:29.069Z,1516416449.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:29.471Z,1516416449.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:29.884Z,1516416449.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:30.271Z,1516416450.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:30.684Z,1516416450.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:31.071Z,1516416451.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:31.485Z,1516416451.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:31.897Z,1516416451.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:32.337Z,1516416452.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:32.686Z,1516416452.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:33.075Z,1516416453.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:33.471Z,1516416453.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:33.866Z,1516416453.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:34.271Z,1516416454.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:34.671Z,1516416454.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:35.067Z,1516416455.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:35.471Z,1516416455.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:35.871Z,1516416455.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:36.268Z,1516416456.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:36.690Z,1516416456.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:37.095Z,1516416457.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:37.477Z,1516416457.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:37.894Z,1516416457.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:38.272Z,1516416458.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:38.667Z,1516416458.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:39.076Z,1516416459.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:39.480Z,1516416459.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:39.872Z,1516416459.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:40.282Z,1516416460.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:40.682Z,1516416460.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:41.075Z,1516416461.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:41.475Z,1516416461.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:41.887Z,1516416461.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:42.285Z,1516416462.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:42.688Z,1516416462.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:43.094Z,1516416463.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:43.467Z,1516416463.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:43.886Z,1516416463.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:44.272Z,1516416464.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:44.676Z,1516416464.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:45.080Z,1516416465.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:45.468Z,1516416465.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:45.877Z,1516416465.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:46.281Z,1516416466.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:46.672Z,1516416466.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:47.083Z,1516416467.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:47.496Z,1516416467.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:47.878Z,1516416467.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:48.295Z,1516416468.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:48.673Z,1516416468.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:49.075Z,1516416469.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:49.470Z,1516416469.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:49.877Z,1516416469.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:50.275Z,1516416470.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:50.670Z,1516416470.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:51.088Z,1516416471.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:51.467Z,1516416471.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:51.882Z,1516416471.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:52.289Z,1516416472.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:52.686Z,1516416472.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:53.095Z,1516416473.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:53.490Z,1516416473.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:53.867Z,1516416473.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:54.275Z,1516416474.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:54.671Z,1516416474.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:55.067Z,1516416475.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:55.475Z,1516416475.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:55.871Z,1516416475.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:56.267Z,1516416476.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:56.675Z,1516416476.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:57.071Z,1516416477.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:57.489Z,1516416477.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:57.894Z,1516416477.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:58.294Z,1516416478.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:58.678Z,1516416478.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:59.066Z,1516416479.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:59.475Z,1516416479.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:47:59.878Z,1516416479.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:00.279Z,1516416480.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:00.682Z,1516416480.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:01.076Z,1516416481.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:01.476Z,1516416481.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:01.872Z,1516416481.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:02.279Z,1516416482.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:02.690Z,1516416482.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:03.094Z,1516416483.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:06.359Z,1516416486.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:06.486Z,1516416486.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:06.832Z,1516416486.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:07.232Z,1516416487.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:07.638Z,1516416487.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:08.041Z,1516416488.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:08.438Z,1516416488.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:08.838Z,1516416488.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:09.242Z,1516416489.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:09.619Z,1516416489.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:10.019Z,1516416490.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:10.423Z,1516416490.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:10.819Z,1516416490.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:11.219Z,1516416491.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:11.622Z,1516416491.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:12.034Z,1516416492.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:12.426Z,1516416492.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:12.842Z,1516416492.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:13.242Z,1516416493.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:13.642Z,1516416493.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:14.042Z,1516416494.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:14.427Z,1516416494.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:14.824Z,1516416494.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:15.228Z,1516416495.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:15.627Z,1516416495.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:16.025Z,1516416496.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:16.431Z,1516416496.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:16.819Z,1516416496.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:17.219Z,1516416497.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:17.626Z,1516416497.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:18.039Z,1516416498.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:18.445Z,1516416498.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:18.849Z,1516416498.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:19.239Z,1516416499.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:19.619Z,1516416499.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:20.023Z,1516416500.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:20.426Z,1516416500.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:20.827Z,1516416500.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:21.227Z,1516416501.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:21.623Z,1516416501.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:22.031Z,1516416502.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:22.428Z,1516416502.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:22.826Z,1516416502.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:23.238Z,1516416503.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:23.646Z,1516416503.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:24.036Z,1516416504.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:24.434Z,1516416504.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:24.831Z,1516416504.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:25.231Z,1516416505.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:25.624Z,1516416505.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:26.039Z,1516416506.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:26.432Z,1516416506.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:26.832Z,1516416506.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:27.229Z,1516416507.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:27.626Z,1516416507.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:28.029Z,1516416508.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:28.442Z,1516416508.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:28.838Z,1516416508.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:29.246Z,1516416509.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:29.641Z,1516416509.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:30.019Z,1516416510.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:30.427Z,1516416510.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:30.839Z,1516416510.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:31.225Z,1516416511.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:31.634Z,1516416511.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:32.030Z,1516416512.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:32.426Z,1516416512.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:32.825Z,1516416512.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:33.254Z,1516416513.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:33.636Z,1516416513.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:34.047Z,1516416514.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:34.444Z,1516416514.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:34.844Z,1516416514.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:35.233Z,1516416515.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:35.633Z,1516416515.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:36.035Z,1516416516.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:36.434Z,1516416516.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:36.834Z,1516416516.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:37.237Z,1516416517.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:37.639Z,1516416517.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:38.026Z,1516416518.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:38.433Z,1516416518.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:38.845Z,1516416518.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:39.267Z,1516416519.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:39.654Z,1516416519.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:40.047Z,1516416520.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:40.451Z,1516416520.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:40.825Z,1516416520.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:41.225Z,1516416521.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:41.632Z,1516416521.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:42.034Z,1516416522.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:42.430Z,1516416522.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:42.834Z,1516416522.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:43.225Z,1516416523.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:43.625Z,1516416523.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:44.044Z,1516416524.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:44.434Z,1516416524.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:44.833Z,1516416524.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:45.234Z,1516416525.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:45.627Z,1516416525.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:46.020Z,1516416526.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:46.427Z,1516416526.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:46.831Z,1516416526.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:47.224Z,1516416527.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:47.630Z,1516416527.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:48.027Z,1516416528.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:48.426Z,1516416528.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:48.825Z,1516416528.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:49.238Z,1516416529.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:49.637Z,1516416529.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:50.041Z,1516416530.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:50.443Z,1516416530.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:50.819Z,1516416530.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:51.226Z,1516416531.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:51.636Z,1516416531.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:52.034Z,1516416532.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:52.423Z,1516416532.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:52.827Z,1516416532.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:53.216Z,1516416533.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:53.623Z,1516416533.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:54.019Z,1516416534.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:54.446Z,1516416534.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:54.842Z,1516416534.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:55.243Z,1516416535.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:55.638Z,1516416535.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:56.023Z,1516416536.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:56.419Z,1516416536.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:56.816Z,1516416536.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:57.223Z,1516416537.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:57.644Z,1516416537.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:58.027Z,1516416538.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:58.443Z,1516416538.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:58.819Z,1516416538.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:59.219Z,1516416539.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:48:59.641Z,1516416539.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:00.059Z,1516416540.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:00.434Z,1516416540.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:00.846Z,1516416540.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:01.226Z,1516416541.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:01.620Z,1516416541.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:02.027Z,1516416542.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:02.431Z,1516416542.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:02.825Z,1516416542.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:03.232Z,1516416543.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:06.508Z,1516416546.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:06.635Z,1516416546.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:06.995Z,1516416546.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:07.396Z,1516416547.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:07.768Z,1516416547.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:08.182Z,1516416548.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:08.567Z,1516416548.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:08.966Z,1516416548.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:09.371Z,1516416549.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:09.767Z,1516416549.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:10.175Z,1516416550.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:10.571Z,1516416550.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:10.967Z,1516416550.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:11.401Z,1516416551.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:11.802Z,1516416551.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:12.204Z,1516416552.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:12.582Z,1516416552.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:12.996Z,1516416552.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:13.367Z,1516416553.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:13.777Z,1516416553.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:14.171Z,1516416554.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:14.567Z,1516416554.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:14.966Z,1516416554.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:15.370Z,1516416555.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:15.767Z,1516416555.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:16.166Z,1516416556.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:16.599Z,1516416556.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:16.999Z,1516416556.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:17.378Z,1516416557.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:17.798Z,1516416557.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:18.167Z,1516416558.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:18.567Z,1516416558.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:18.983Z,1516416558.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:19.383Z,1516416559.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:19.772Z,1516416559.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:20.179Z,1516416560.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:20.575Z,1516416560.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:20.973Z,1516416560.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:21.378Z,1516416561.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:21.786Z,1516416561.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:22.186Z,1516416562.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:22.243Z,1516416562.243 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T02:49:22.587Z,1516416562.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:22.988Z,1516416562.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:23.367Z,1516416563.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:23.774Z,1516416563.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:24.167Z,1516416564.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:24.566Z,1516416564.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:24.979Z,1516416564.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:25.367Z,1516416565.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:25.777Z,1516416565.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:26.183Z,1516416566.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:26.578Z,1516416566.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:26.985Z,1516416566.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:27.406Z,1516416567.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:27.795Z,1516416567.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:28.207Z,1516416568.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:28.579Z,1516416568.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:28.980Z,1516416568.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:29.379Z,1516416569.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:29.781Z,1516416569.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:30.181Z,1516416570.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:30.574Z,1516416570.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:30.978Z,1516416570.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:31.381Z,1516416571.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:31.774Z,1516416571.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:32.196Z,1516416572.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:32.588Z,1516416572.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:32.987Z,1516416572.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:33.401Z,1516416573.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:33.771Z,1516416573.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:34.167Z,1516416574.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:34.575Z,1516416574.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:34.967Z,1516416574.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:35.374Z,1516416575.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:35.771Z,1516416575.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:36.175Z,1516416576.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:36.568Z,1516416576.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:36.971Z,1516416576.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:37.402Z,1516416577.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:37.782Z,1516416577.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:38.208Z,1516416578.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:38.582Z,1516416578.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:38.966Z,1516416578.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:39.371Z,1516416579.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:39.774Z,1516416579.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:40.172Z,1516416580.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:40.576Z,1516416580.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:40.973Z,1516416580.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:41.370Z,1516416581.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:41.774Z,1516416581.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:42.175Z,1516416582.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:42.585Z,1516416582.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:42.996Z,1516416582.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:43.386Z,1516416583.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:43.784Z,1516416583.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:44.187Z,1516416584.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:44.567Z,1516416584.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:44.968Z,1516416584.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:45.375Z,1516416585.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:45.767Z,1516416585.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:46.167Z,1516416586.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:46.578Z,1516416586.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:46.976Z,1516416586.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:47.373Z,1516416587.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:47.782Z,1516416587.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:48.186Z,1516416588.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:48.586Z,1516416588.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:48.995Z,1516416588.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:49.371Z,1516416589.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:49.765Z,1516416589.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:50.175Z,1516416590.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:50.571Z,1516416590.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:50.968Z,1516416590.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:51.374Z,1516416591.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:51.779Z,1516416591.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:52.179Z,1516416592.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:52.579Z,1516416592.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:53.000Z,1516416593.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:53.396Z,1516416593.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:53.799Z,1516416593.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:54.196Z,1516416594.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:54.576Z,1516416594.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:54.977Z,1516416594.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:55.383Z,1516416595.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:55.772Z,1516416595.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:56.177Z,1516416596.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:56.580Z,1516416596.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:56.970Z,1516416596.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:57.383Z,1516416597.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:57.774Z,1516416597.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:58.184Z,1516416598.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:58.599Z,1516416598.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:59.001Z,1516416599.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:59.378Z,1516416599.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:49:59.774Z,1516416599.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:00.171Z,1516416600.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:00.571Z,1516416600.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:00.971Z,1516416600.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:01.372Z,1516416601.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:01.777Z,1516416601.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:02.177Z,1516416602.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:02.579Z,1516416602.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:02.982Z,1516416602.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:03.387Z,1516416603.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:06.680Z,1516416606.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:06.701Z,1516416606.701 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T02:45:05.8Z
2018-01-20T02:50:06.701Z,1516416606.701 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T02:50:06.701Z,1516416606.701 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T02:50:06.830Z,1516416606.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:07.350Z,1516416607.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:07.704Z,1516416607.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:07.724Z,1516416607.724 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:50:07.725Z,1516416607.725 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-01-20T02:50:07.725Z,1516416607.725 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:50:07.757Z,1516416607.757 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:50:08.097Z,1516416608.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:08.157Z,1516416608.157 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:50:08.157Z,1516416608.157 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-01-20T02:50:08.487Z,1516416608.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:08.526Z,1516416608.526 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:50:08.526Z,1516416608.526 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:50:08.527Z,1516416608.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:50:11.767Z,1516416611.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:11.874Z,1516416611.874 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0148.lzma
2018-01-20T02:50:11.958Z,1516416611.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:12.283Z,1516416612.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:12.635Z,1516416612.635 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0148.lzma.bak
2018-01-20T02:50:12.635Z,1516416612.635 [DataOverHttps](INFO): SBD MOMSN=7725960
2018-01-20T02:50:12.679Z,1516416612.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:13.172Z,1516416613.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:13.469Z,1516416613.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:16.738Z,1516416616.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:16.874Z,1516416616.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:17.230Z,1516416617.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:17.646Z,1516416617.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:18.026Z,1516416618.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:18.425Z,1516416618.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:21.698Z,1516416621.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:21.808Z,1516416621.808 [DataOverHttps](INFO): Sending 214 bytes from file Logs/20180119T210901/Express0149.lzma
2018-01-20T02:50:21.851Z,1516416621.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:22.208Z,1516416622.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:22.559Z,1516416622.559 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0149.lzma.bak
2018-01-20T02:50:22.559Z,1516416622.559 [DataOverHttps](INFO): SBD MOMSN=7725962
2018-01-20T02:50:22.606Z,1516416622.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:23.091Z,1516416623.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:23.111Z,1516416623.111 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T02:50:23.111Z,1516416623.111 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T02:50:23.112Z,1516416623.112 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T02:50:23.384Z,1516416623.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:26.695Z,1516416626.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:26.814Z,1516416626.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:27.178Z,1516416627.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:27.591Z,1516416627.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:27.962Z,1516416627.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:28.367Z,1516416628.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:28.772Z,1516416628.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:29.161Z,1516416629.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:29.567Z,1516416629.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:29.964Z,1516416629.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:30.362Z,1516416630.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:30.771Z,1516416630.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:31.165Z,1516416631.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:31.574Z,1516416631.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:31.977Z,1516416631.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:32.375Z,1516416632.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:32.777Z,1516416632.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:33.159Z,1516416633.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:33.563Z,1516416633.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:33.989Z,1516416633.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:34.359Z,1516416634.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:34.759Z,1516416634.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:35.156Z,1516416635.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:35.563Z,1516416635.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:35.955Z,1516416635.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:36.354Z,1516416636.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:36.783Z,1516416636.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:37.166Z,1516416637.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:37.586Z,1516416637.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:37.982Z,1516416637.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:38.364Z,1516416638.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:38.767Z,1516416638.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:39.166Z,1516416639.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:39.563Z,1516416639.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:39.956Z,1516416639.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:40.371Z,1516416640.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:40.764Z,1516416640.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:41.164Z,1516416641.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:41.565Z,1516416641.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:41.973Z,1516416641.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:42.373Z,1516416642.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:42.777Z,1516416642.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:43.174Z,1516416643.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:43.559Z,1516416643.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:43.959Z,1516416643.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:44.355Z,1516416644.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:44.752Z,1516416644.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:45.179Z,1516416645.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:45.559Z,1516416645.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:45.958Z,1516416645.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:46.363Z,1516416646.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:46.759Z,1516416646.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:47.177Z,1516416647.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:47.582Z,1516416647.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:47.966Z,1516416647.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:48.370Z,1516416648.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:48.759Z,1516416648.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:49.164Z,1516416649.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:49.554Z,1516416649.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:49.959Z,1516416649.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:50.367Z,1516416650.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:50.759Z,1516416650.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:51.159Z,1516416651.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:51.564Z,1516416651.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:51.961Z,1516416651.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:52.370Z,1516416652.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:52.769Z,1516416652.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:53.170Z,1516416653.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:53.576Z,1516416653.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:53.971Z,1516416653.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:54.355Z,1516416654.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:54.771Z,1516416654.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:55.155Z,1516416655.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:55.554Z,1516416655.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:55.962Z,1516416655.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:56.355Z,1516416656.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:56.755Z,1516416656.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:57.163Z,1516416657.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:57.579Z,1516416657.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:57.974Z,1516416657.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:58.383Z,1516416658.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:58.779Z,1516416658.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:59.156Z,1516416659.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:59.559Z,1516416659.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:50:59.960Z,1516416659.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:00.354Z,1516416660.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:00.759Z,1516416660.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:01.155Z,1516416661.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:01.556Z,1516416661.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:01.990Z,1516416661.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:02.355Z,1516416662.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:02.766Z,1516416662.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:03.183Z,1516416663.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:03.566Z,1516416663.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:03.966Z,1516416663.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:04.359Z,1516416664.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:04.755Z,1516416664.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:05.160Z,1516416665.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:05.564Z,1516416665.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:05.967Z,1516416665.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:06.342Z,1516416666.342 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T02:51:06.364Z,1516416666.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:06.763Z,1516416666.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:07.169Z,1516416667.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:07.564Z,1516416667.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:07.967Z,1516416667.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:08.355Z,1516416668.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:08.755Z,1516416668.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:09.154Z,1516416669.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:09.559Z,1516416669.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:09.956Z,1516416669.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:10.362Z,1516416670.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:10.755Z,1516416670.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:11.155Z,1516416671.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:11.554Z,1516416671.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:11.963Z,1516416671.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:12.355Z,1516416672.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:12.758Z,1516416672.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:13.163Z,1516416673.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:13.552Z,1516416673.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:13.955Z,1516416673.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:14.362Z,1516416674.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:14.756Z,1516416674.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:15.163Z,1516416675.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:15.559Z,1516416675.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:15.968Z,1516416675.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:16.365Z,1516416676.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:16.761Z,1516416676.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:17.160Z,1516416677.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:17.575Z,1516416677.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:17.970Z,1516416677.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:18.370Z,1516416678.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:18.766Z,1516416678.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:19.169Z,1516416679.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:19.570Z,1516416679.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:19.965Z,1516416679.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:20.369Z,1516416680.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:20.759Z,1516416680.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:21.162Z,1516416681.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:21.566Z,1516416681.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:21.964Z,1516416681.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:22.359Z,1516416682.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:22.759Z,1516416682.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:23.157Z,1516416683.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:23.559Z,1516416683.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:26.832Z,1516416686.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:26.951Z,1516416686.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:27.338Z,1516416687.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:27.735Z,1516416687.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:28.123Z,1516416688.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:28.522Z,1516416688.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:28.923Z,1516416688.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:29.339Z,1516416689.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:29.727Z,1516416689.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:30.123Z,1516416690.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:30.523Z,1516416690.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:30.927Z,1516416690.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:31.323Z,1516416691.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:31.724Z,1516416691.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:32.130Z,1516416692.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:32.531Z,1516416692.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:32.924Z,1516416692.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:33.322Z,1516416693.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:33.731Z,1516416693.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:34.131Z,1516416694.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:34.527Z,1516416694.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:34.923Z,1516416694.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:35.332Z,1516416695.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:35.731Z,1516416695.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:36.135Z,1516416696.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:36.527Z,1516416696.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:36.922Z,1516416696.922 [NAL9602](INFO): Powering down
2018-01-20T02:51:36.941Z,1516416696.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:37.331Z,1516416697.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:37.727Z,1516416697.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:38.133Z,1516416698.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:38.534Z,1516416698.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:38.933Z,1516416698.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:39.340Z,1516416699.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:39.739Z,1516416699.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:40.130Z,1516416700.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:40.527Z,1516416700.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:40.943Z,1516416700.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:41.327Z,1516416701.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:41.727Z,1516416701.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:42.132Z,1516416702.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:42.530Z,1516416702.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:42.926Z,1516416702.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:43.331Z,1516416703.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:43.726Z,1516416703.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:44.142Z,1516416704.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:44.531Z,1516416704.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:44.922Z,1516416704.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:45.325Z,1516416705.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:45.731Z,1516416705.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:46.124Z,1516416706.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:46.526Z,1516416706.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:46.933Z,1516416706.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:47.324Z,1516416707.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:47.734Z,1516416707.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:48.128Z,1516416708.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:48.536Z,1516416708.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:48.937Z,1516416708.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:49.335Z,1516416709.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:49.735Z,1516416709.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:50.137Z,1516416710.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:50.540Z,1516416710.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:50.934Z,1516416710.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:51.343Z,1516416711.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:51.741Z,1516416711.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:52.133Z,1516416712.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:52.535Z,1516416712.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:52.940Z,1516416712.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:53.323Z,1516416713.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:53.732Z,1516416713.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:54.131Z,1516416714.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:54.527Z,1516416714.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:54.923Z,1516416714.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:55.330Z,1516416715.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:55.336Z,1516416715.336 [PNI_TCM](ERROR): CRC does not match. Expected:0x47876 got:0x49482
2018-01-20T02:51:55.732Z,1516416715.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:56.135Z,1516416716.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:56.524Z,1516416716.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:56.934Z,1516416716.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:56.952Z,1516416716.952 [PNI_TCM](ERROR): CRC does not match. Expected:0x26839 got:0x6171
2018-01-20T02:51:57.333Z,1516416717.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:57.727Z,1516416717.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:58.123Z,1516416718.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:58.529Z,1516416718.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:58.930Z,1516416718.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:59.338Z,1516416719.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:51:59.733Z,1516416719.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:00.133Z,1516416720.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:00.139Z,1516416720.139 [PNI_TCM](ERROR): CRC does not match. Expected:0x12284 got:0x104
2018-01-20T02:52:00.535Z,1516416720.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:00.932Z,1516416720.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:01.331Z,1516416721.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:01.744Z,1516416721.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:01.750Z,1516416721.750 [PNI_TCM](ERROR): CRC does not match. Expected:0x59030 got:0x49414
2018-01-20T02:52:02.138Z,1516416722.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:02.532Z,1516416722.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:02.930Z,1516416722.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:03.334Z,1516416723.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:03.741Z,1516416723.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:04.140Z,1516416724.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:04.534Z,1516416724.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:04.920Z,1516416724.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:05.334Z,1516416725.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:05.734Z,1516416725.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:06.134Z,1516416726.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:06.536Z,1516416726.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:06.937Z,1516416726.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:07.335Z,1516416727.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:07.730Z,1516416727.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:08.135Z,1516416728.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:08.523Z,1516416728.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:08.933Z,1516416728.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:09.338Z,1516416729.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:09.720Z,1516416729.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:10.123Z,1516416730.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:10.532Z,1516416730.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:10.924Z,1516416730.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:11.323Z,1516416731.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:11.732Z,1516416731.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:12.133Z,1516416732.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:12.534Z,1516416732.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:12.935Z,1516416732.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:13.336Z,1516416733.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:13.737Z,1516416733.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:14.135Z,1516416734.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:14.531Z,1516416734.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:14.936Z,1516416734.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:15.338Z,1516416735.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:15.732Z,1516416735.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:16.134Z,1516416736.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:16.530Z,1516416736.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:16.932Z,1516416736.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:17.334Z,1516416737.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:17.739Z,1516416737.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:18.127Z,1516416738.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:18.533Z,1516416738.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:18.930Z,1516416738.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:19.335Z,1516416739.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:19.738Z,1516416739.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:20.135Z,1516416740.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:20.523Z,1516416740.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:20.939Z,1516416740.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:21.348Z,1516416741.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:21.720Z,1516416741.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:22.131Z,1516416742.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:22.527Z,1516416742.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:22.923Z,1516416742.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:23.327Z,1516416743.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:23.732Z,1516416743.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:27.019Z,1516416747.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:27.131Z,1516416747.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:27.535Z,1516416747.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:27.927Z,1516416747.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:28.325Z,1516416748.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:28.729Z,1516416748.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:29.127Z,1516416749.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:29.526Z,1516416749.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:29.930Z,1516416749.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:30.326Z,1516416750.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:30.726Z,1516416750.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:31.126Z,1516416751.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:31.526Z,1516416751.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:31.926Z,1516416751.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:32.330Z,1516416752.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:32.726Z,1516416752.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:33.126Z,1516416753.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:33.526Z,1516416753.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:33.928Z,1516416753.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:34.331Z,1516416754.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:34.729Z,1516416754.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:35.126Z,1516416755.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:35.530Z,1516416755.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:35.927Z,1516416755.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:36.328Z,1516416756.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:36.731Z,1516416756.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:37.126Z,1516416757.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:37.526Z,1516416757.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:37.929Z,1516416757.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:38.318Z,1516416758.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:38.720Z,1516416758.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:39.123Z,1516416759.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:39.526Z,1516416759.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:39.920Z,1516416759.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:40.335Z,1516416760.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:40.727Z,1516416760.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:41.127Z,1516416761.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:41.528Z,1516416761.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:41.927Z,1516416761.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:42.327Z,1516416762.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:42.728Z,1516416762.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:43.129Z,1516416763.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:43.526Z,1516416763.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:43.929Z,1516416763.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:44.331Z,1516416764.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:44.726Z,1516416764.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:45.129Z,1516416765.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:45.526Z,1516416765.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:45.928Z,1516416765.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:46.329Z,1516416766.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:46.729Z,1516416766.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:47.127Z,1516416767.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:47.529Z,1516416767.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:47.929Z,1516416767.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:48.331Z,1516416768.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:48.736Z,1516416768.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:49.130Z,1516416769.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:49.527Z,1516416769.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:49.936Z,1516416769.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:50.330Z,1516416770.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:50.720Z,1516416770.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:51.136Z,1516416771.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:51.523Z,1516416771.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:51.919Z,1516416771.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:52.323Z,1516416772.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:52.723Z,1516416772.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:53.119Z,1516416773.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:53.535Z,1516416773.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:53.923Z,1516416773.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:54.326Z,1516416774.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:54.721Z,1516416774.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:55.123Z,1516416775.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:55.529Z,1516416775.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:55.924Z,1516416775.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:56.327Z,1516416776.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:56.733Z,1516416776.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:57.128Z,1516416777.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:57.532Z,1516416777.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:57.931Z,1516416777.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:58.327Z,1516416778.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:58.726Z,1516416778.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:59.127Z,1516416779.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:59.527Z,1516416779.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:52:59.926Z,1516416779.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:00.326Z,1516416780.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:00.728Z,1516416780.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:01.126Z,1516416781.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:01.534Z,1516416781.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:01.920Z,1516416781.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:02.342Z,1516416782.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:02.719Z,1516416782.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:03.120Z,1516416783.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:03.523Z,1516416783.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:03.919Z,1516416783.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:04.319Z,1516416784.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:04.723Z,1516416784.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:05.123Z,1516416785.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:05.519Z,1516416785.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:05.927Z,1516416785.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:06.319Z,1516416786.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:06.716Z,1516416786.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:07.123Z,1516416787.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:07.519Z,1516416787.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:07.923Z,1516416787.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:08.335Z,1516416788.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:08.730Z,1516416788.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:08.749Z,1516416788.749 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:53:08.749Z,1516416788.749 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-01-20T02:53:08.749Z,1516416788.749 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:53:08.798Z,1516416788.798 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:53:09.124Z,1516416789.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:09.154Z,1516416789.154 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:53:09.154Z,1516416789.154 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-01-20T02:53:09.529Z,1516416789.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:09.551Z,1516416789.551 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:53:09.551Z,1516416789.551 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:53:09.551Z,1516416789.551 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:53:09.926Z,1516416789.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:10.326Z,1516416790.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:10.726Z,1516416790.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:11.134Z,1516416791.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:11.528Z,1516416791.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:11.925Z,1516416791.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:12.334Z,1516416792.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:12.720Z,1516416792.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:13.142Z,1516416793.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:13.519Z,1516416793.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:13.919Z,1516416793.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:14.342Z,1516416794.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:14.734Z,1516416794.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:15.120Z,1516416795.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:15.526Z,1516416795.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:15.919Z,1516416795.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:16.320Z,1516416796.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:16.733Z,1516416796.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:17.124Z,1516416797.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:17.524Z,1516416797.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:17.950Z,1516416797.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:18.328Z,1516416798.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:18.728Z,1516416798.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:19.142Z,1516416799.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:19.530Z,1516416799.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:19.930Z,1516416799.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:20.334Z,1516416800.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:20.724Z,1516416800.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:21.124Z,1516416801.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:21.524Z,1516416801.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:21.928Z,1516416801.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:22.331Z,1516416802.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:22.743Z,1516416802.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:23.132Z,1516416803.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:23.532Z,1516416803.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:23.973Z,1516416803.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:30.399Z,1516416810.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:30.529Z,1516416810.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:30.920Z,1516416810.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:31.335Z,1516416811.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:31.715Z,1516416811.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:32.118Z,1516416812.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:32.522Z,1516416812.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:32.916Z,1516416812.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:33.318Z,1516416813.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:33.723Z,1516416813.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:34.126Z,1516416814.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:34.530Z,1516416814.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:34.927Z,1516416814.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:35.327Z,1516416815.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:35.725Z,1516416815.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:36.128Z,1516416816.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:36.522Z,1516416816.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:36.926Z,1516416816.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:37.331Z,1516416817.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:37.712Z,1516416817.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:38.114Z,1516416818.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:38.523Z,1516416818.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:38.915Z,1516416818.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:39.314Z,1516416819.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:39.723Z,1516416819.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:40.115Z,1516416820.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:40.518Z,1516416820.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:40.923Z,1516416820.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:41.319Z,1516416821.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:41.726Z,1516416821.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:42.127Z,1516416822.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:42.523Z,1516416822.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:42.927Z,1516416822.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:43.327Z,1516416823.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:43.722Z,1516416823.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:44.133Z,1516416824.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:44.528Z,1516416824.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:44.922Z,1516416824.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:45.327Z,1516416825.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:45.731Z,1516416825.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:46.127Z,1516416826.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:46.514Z,1516416826.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:46.931Z,1516416826.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:47.319Z,1516416827.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:47.722Z,1516416827.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:48.127Z,1516416828.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:48.515Z,1516416828.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:48.915Z,1516416828.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:49.323Z,1516416829.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:49.719Z,1516416829.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:50.123Z,1516416830.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:50.523Z,1516416830.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:50.927Z,1516416830.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:51.326Z,1516416831.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:51.717Z,1516416831.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:52.119Z,1516416832.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:52.525Z,1516416832.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:52.920Z,1516416832.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:53.324Z,1516416833.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:53.722Z,1516416833.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:54.123Z,1516416834.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:54.523Z,1516416834.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:54.927Z,1516416834.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:55.323Z,1516416835.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:55.726Z,1516416835.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:56.126Z,1516416836.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:56.528Z,1516416836.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:56.923Z,1516416836.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:57.332Z,1516416837.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:57.715Z,1516416837.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:58.115Z,1516416838.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:58.515Z,1516416838.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:58.915Z,1516416838.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:59.314Z,1516416839.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:53:59.718Z,1516416839.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:00.115Z,1516416840.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:00.522Z,1516416840.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:00.914Z,1516416840.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:01.322Z,1516416841.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:01.722Z,1516416841.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:02.119Z,1516416842.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:02.523Z,1516416842.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:02.923Z,1516416842.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:03.314Z,1516416843.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:03.722Z,1516416843.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:04.122Z,1516416844.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:04.519Z,1516416844.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:04.916Z,1516416844.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:05.315Z,1516416845.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:05.718Z,1516416845.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:06.119Z,1516416846.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:06.519Z,1516416846.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:06.930Z,1516416846.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:07.327Z,1516416847.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:07.727Z,1516416847.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:08.123Z,1516416848.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:08.522Z,1516416848.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:08.915Z,1516416848.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:09.326Z,1516416849.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:09.712Z,1516416849.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:10.115Z,1516416850.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:10.514Z,1516416850.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:10.916Z,1516416850.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:11.330Z,1516416851.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:11.726Z,1516416851.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:12.115Z,1516416852.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:12.531Z,1516416852.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:12.914Z,1516416852.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:13.315Z,1516416853.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:13.730Z,1516416853.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:14.126Z,1516416854.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:14.515Z,1516416854.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:14.931Z,1516416854.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:15.326Z,1516416855.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:15.716Z,1516416855.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:16.119Z,1516416856.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:16.519Z,1516416856.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:16.915Z,1516416856.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:17.323Z,1516416857.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:17.719Z,1516416857.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:18.122Z,1516416858.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:18.523Z,1516416858.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:18.919Z,1516416858.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:19.319Z,1516416859.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:19.727Z,1516416859.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:20.123Z,1516416860.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:20.527Z,1516416860.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:20.926Z,1516416860.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:21.326Z,1516416861.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:21.726Z,1516416861.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:22.125Z,1516416862.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:22.530Z,1516416862.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:22.922Z,1516416862.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:23.322Z,1516416863.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:23.731Z,1516416863.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:24.115Z,1516416864.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:27.392Z,1516416867.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:27.513Z,1516416867.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:27.886Z,1516416867.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:28.290Z,1516416868.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:28.683Z,1516416868.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:29.090Z,1516416869.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:29.486Z,1516416869.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:29.886Z,1516416869.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:30.293Z,1516416870.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:30.686Z,1516416870.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:31.087Z,1516416871.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:31.499Z,1516416871.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:31.895Z,1516416871.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:32.283Z,1516416872.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:32.694Z,1516416872.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:33.091Z,1516416873.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:33.488Z,1516416873.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:33.889Z,1516416873.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:34.292Z,1516416874.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:34.682Z,1516416874.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:35.093Z,1516416875.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:35.494Z,1516416875.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:35.886Z,1516416875.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:36.290Z,1516416876.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:36.687Z,1516416876.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:37.087Z,1516416877.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:37.489Z,1516416877.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:37.886Z,1516416877.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:38.279Z,1516416878.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:38.694Z,1516416878.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:39.095Z,1516416879.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:39.483Z,1516416879.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:39.878Z,1516416879.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:40.287Z,1516416880.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:40.679Z,1516416880.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:41.082Z,1516416881.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:41.487Z,1516416881.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:41.886Z,1516416881.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:42.286Z,1516416882.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:42.684Z,1516416882.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:43.091Z,1516416883.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:43.490Z,1516416883.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:43.887Z,1516416883.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:44.285Z,1516416884.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:44.685Z,1516416884.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:45.090Z,1516416885.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:45.487Z,1516416885.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:45.886Z,1516416885.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:46.290Z,1516416886.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:46.686Z,1516416886.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:47.092Z,1516416887.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:47.486Z,1516416887.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:47.892Z,1516416887.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:48.293Z,1516416888.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:48.680Z,1516416888.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:49.079Z,1516416889.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:49.482Z,1516416889.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:49.884Z,1516416889.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:50.287Z,1516416890.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:50.691Z,1516416890.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:51.084Z,1516416891.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:51.487Z,1516416891.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:51.890Z,1516416891.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:52.288Z,1516416892.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:52.686Z,1516416892.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:53.090Z,1516416893.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:53.486Z,1516416893.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:53.886Z,1516416893.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:54.281Z,1516416894.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:54.686Z,1516416894.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:55.086Z,1516416895.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:55.490Z,1516416895.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:55.886Z,1516416895.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:56.287Z,1516416896.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:56.690Z,1516416896.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:57.088Z,1516416897.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:57.486Z,1516416897.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:57.890Z,1516416897.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:58.282Z,1516416898.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:58.686Z,1516416898.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:59.086Z,1516416899.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:59.486Z,1516416899.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:54:59.886Z,1516416899.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:00.286Z,1516416900.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:00.683Z,1516416900.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:01.086Z,1516416901.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:01.486Z,1516416901.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:01.888Z,1516416901.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:02.289Z,1516416902.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:02.694Z,1516416902.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:03.076Z,1516416903.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:03.494Z,1516416903.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:03.887Z,1516416903.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:04.288Z,1516416904.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:04.690Z,1516416904.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:05.090Z,1516416905.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:05.486Z,1516416905.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:05.890Z,1516416905.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:06.287Z,1516416906.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:06.688Z,1516416906.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:07.086Z,1516416907.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:07.490Z,1516416907.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:07.886Z,1516416907.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:08.299Z,1516416908.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:08.678Z,1516416908.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:09.080Z,1516416909.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:09.495Z,1516416909.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:09.890Z,1516416909.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:10.279Z,1516416910.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:10.695Z,1516416910.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:11.090Z,1516416911.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:11.480Z,1516416911.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:11.883Z,1516416911.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:12.287Z,1516416912.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:12.676Z,1516416912.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:13.083Z,1516416913.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:13.487Z,1516416913.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:13.882Z,1516416913.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:14.287Z,1516416914.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:14.691Z,1516416914.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:15.086Z,1516416915.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:15.488Z,1516416915.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:15.892Z,1516416915.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:16.283Z,1516416916.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:16.692Z,1516416916.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:17.089Z,1516416917.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:17.486Z,1516416917.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:17.894Z,1516416917.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:18.290Z,1516416918.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:18.686Z,1516416918.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:19.089Z,1516416919.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:19.496Z,1516416919.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:19.886Z,1516416919.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:20.286Z,1516416920.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:20.686Z,1516416920.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:21.095Z,1516416921.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:21.483Z,1516416921.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:21.883Z,1516416921.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:22.283Z,1516416922.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:22.695Z,1516416922.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:23.083Z,1516416923.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:23.479Z,1516416923.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:23.520Z,1516416923.520 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T02:55:23.520Z,1516416923.520 [Default:CheckIn:C.Wait] Stopped
2018-01-20T02:55:23.521Z,1516416923.521 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T02:55:23.521Z,1516416923.521 [Default:CheckIn:D] Running Loop=1
2018-01-20T02:55:23.884Z,1516416923.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:23.916Z,1516416923.916 [Default:CheckIn:D] Stopped
2018-01-20T02:55:23.916Z,1516416923.916 [Default:CheckIn:E] Running Loop=1
2018-01-20T02:55:24.283Z,1516416924.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:24.326Z,1516416924.326 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 51.788175 min 
2018-01-20T02:55:24.326Z,1516416924.326 [Default:CheckIn:E] Stopped
2018-01-20T02:55:24.327Z,1516416924.327 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T02:55:24.327Z,1516416924.327 [Default:CheckIn] Stopped
2018-01-20T02:55:24.327Z,1516416924.327 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T02:55:24.327Z,1516416924.327 [Default:CheckIn](INFO): Running loop #6
2018-01-20T02:55:24.327Z,1516416924.327 [Default:CheckIn] Running Loop=6
2018-01-20T02:55:24.327Z,1516416924.327 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T02:55:24.327Z,1516416924.327 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T02:55:27.558Z,1516416927.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:27.662Z,1516416927.662 [NAL9602](INFO): Powering up
2018-01-20T02:55:27.680Z,1516416927.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:28.039Z,1516416928.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:28.439Z,1516416928.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:28.461Z,1516416928.461 [PNI_TCM](ERROR): CRC does not match. Expected:0x13097 got:0x1580
2018-01-20T02:55:28.841Z,1516416928.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:29.241Z,1516416929.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:29.635Z,1516416929.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:30.043Z,1516416930.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:30.440Z,1516416930.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:30.837Z,1516416930.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:31.243Z,1516416931.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:31.638Z,1516416931.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:32.036Z,1516416932.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:32.451Z,1516416932.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:32.843Z,1516416932.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:33.240Z,1516416933.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:33.646Z,1516416933.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:34.047Z,1516416934.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:34.443Z,1516416934.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:34.846Z,1516416934.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:35.247Z,1516416935.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:35.632Z,1516416935.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:36.051Z,1516416936.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:36.451Z,1516416936.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:36.835Z,1516416936.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:37.254Z,1516416937.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:37.638Z,1516416937.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:38.035Z,1516416938.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:38.447Z,1516416938.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:38.826Z,1516416938.826 [NAL9602](INFO): NAL9602 initialized
2018-01-20T02:55:38.845Z,1516416938.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:39.241Z,1516416939.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:39.651Z,1516416939.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:40.064Z,1516416940.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:40.460Z,1516416940.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:40.838Z,1516416940.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:41.246Z,1516416941.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:41.643Z,1516416941.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:42.043Z,1516416942.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:42.445Z,1516416942.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:42.844Z,1516416942.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:43.238Z,1516416943.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:43.655Z,1516416943.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:44.045Z,1516416944.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:44.452Z,1516416944.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:44.852Z,1516416944.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:45.235Z,1516416945.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:45.634Z,1516416945.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:46.042Z,1516416946.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:46.435Z,1516416946.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:46.837Z,1516416946.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:47.239Z,1516416947.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:47.639Z,1516416947.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:48.033Z,1516416948.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:48.443Z,1516416948.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:48.835Z,1516416948.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:49.234Z,1516416949.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:49.639Z,1516416949.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:50.043Z,1516416950.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:50.443Z,1516416950.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:50.839Z,1516416950.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:51.235Z,1516416951.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:51.635Z,1516416951.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:52.042Z,1516416952.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:52.435Z,1516416952.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:52.833Z,1516416952.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:53.239Z,1516416953.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:53.643Z,1516416953.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:54.043Z,1516416954.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:54.439Z,1516416954.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:54.839Z,1516416954.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:55.239Z,1516416955.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:55.644Z,1516416955.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:56.044Z,1516416956.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:56.437Z,1516416956.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:56.844Z,1516416956.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:57.244Z,1516416957.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:57.644Z,1516416957.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:58.046Z,1516416958.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:58.444Z,1516416958.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:58.838Z,1516416958.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:59.242Z,1516416959.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:55:59.635Z,1516416959.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:00.043Z,1516416960.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:00.439Z,1516416960.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:00.835Z,1516416960.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:01.236Z,1516416961.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:01.642Z,1516416961.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:02.035Z,1516416962.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:02.434Z,1516416962.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:02.839Z,1516416962.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:03.243Z,1516416963.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:03.643Z,1516416963.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:04.039Z,1516416964.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:04.439Z,1516416964.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:04.836Z,1516416964.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:05.244Z,1516416965.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:05.639Z,1516416965.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:06.043Z,1516416966.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:06.446Z,1516416966.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:06.843Z,1516416966.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:07.238Z,1516416967.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:07.644Z,1516416967.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:08.044Z,1516416968.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:08.438Z,1516416968.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:08.841Z,1516416968.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:09.252Z,1516416969.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:09.633Z,1516416969.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:09.676Z,1516416969.676 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:56:09.676Z,1516416969.676 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-01-20T02:56:09.676Z,1516416969.676 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:56:09.708Z,1516416969.708 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:56:10.039Z,1516416970.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:10.086Z,1516416970.086 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:56:10.086Z,1516416970.086 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-01-20T02:56:10.435Z,1516416970.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:10.473Z,1516416970.473 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:56:10.473Z,1516416970.473 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:56:10.474Z,1516416970.474 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:56:10.818Z,1516416970.818 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-01-20T02:56:10.901Z,1516416970.901 [NAL9602](FAULT): received: 
+CSQ:0

OK62, 2, 0, 0, 0

OK
2018-01-20T02:56:10.901Z,1516416970.901 [NAL9602] Data Fault, FailCount= 3
2018-01-20T02:56:10.901Z,1516416970.901 [NAL9602](ERROR): Data Fault
2018-01-20T02:56:10.919Z,1516416970.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:10.988Z,1516416970.988 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T02:56:11.222Z,1516416971.222 [NAL9602](INFO): Powering down
2018-01-20T02:56:11.240Z,1516416971.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:11.635Z,1516416971.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:12.035Z,1516416972.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:12.090Z,1516416972.090 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T02:56:12.090Z,1516416972.090 [NAL9602] No Fault, FailCount= 3
2018-01-20T02:56:12.439Z,1516416972.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:12.839Z,1516416972.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:13.239Z,1516416973.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:13.651Z,1516416973.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:14.048Z,1516416974.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:14.449Z,1516416974.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:14.849Z,1516416974.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:15.244Z,1516416975.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:15.642Z,1516416975.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:16.042Z,1516416976.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:16.435Z,1516416976.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:16.832Z,1516416976.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:17.243Z,1516416977.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:17.634Z,1516416977.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:18.043Z,1516416978.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:18.434Z,1516416978.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:18.835Z,1516416978.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:19.234Z,1516416979.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:19.638Z,1516416979.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:20.039Z,1516416980.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:20.435Z,1516416980.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:20.835Z,1516416980.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:21.247Z,1516416981.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:21.643Z,1516416981.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:22.047Z,1516416982.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:22.448Z,1516416982.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:22.840Z,1516416982.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:23.241Z,1516416983.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:23.642Z,1516416983.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:24.042Z,1516416984.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:24.446Z,1516416984.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:27.724Z,1516416987.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:27.858Z,1516416987.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:28.218Z,1516416988.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:28.618Z,1516416988.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:29.014Z,1516416989.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:29.420Z,1516416989.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:29.822Z,1516416989.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:30.222Z,1516416990.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:30.612Z,1516416990.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:31.022Z,1516416991.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:31.404Z,1516416991.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:31.822Z,1516416991.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:32.204Z,1516416992.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:32.623Z,1516416992.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:33.003Z,1516416993.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:33.421Z,1516416993.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:33.800Z,1516416993.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:34.212Z,1516416994.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:34.603Z,1516416994.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:34.000Z,1516416995.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:35.402Z,1516416995.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:35.803Z,1516416995.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:36.213Z,1516416996.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:36.616Z,1516416996.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:37.018Z,1516416997.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:37.418Z,1516416997.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:37.817Z,1516416997.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:38.214Z,1516416998.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:38.617Z,1516416998.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:39.012Z,1516416999.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:39.416Z,1516416999.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:39.812Z,1516416999.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:40.216Z,1516417000.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:40.616Z,1516417000.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:41.012Z,1516417001.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:41.386Z,1516417001.386 [NAL9602](INFO): Powering up NAL9602
2018-01-20T02:56:41.413Z,1516417001.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:41.820Z,1516417001.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:42.216Z,1516417002.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:42.616Z,1516417002.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:42.999Z,1516417002.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:43.417Z,1516417003.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:43.817Z,1516417003.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:44.216Z,1516417004.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:44.600Z,1516417004.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:45.019Z,1516417005.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:45.402Z,1516417005.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:45.800Z,1516417005.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:46.202Z,1516417006.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:46.612Z,1516417006.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:46.000Z,1516417007.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:47.402Z,1516417007.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:47.799Z,1516417007.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:48.203Z,1516417008.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:48.612Z,1516417008.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:49.012Z,1516417009.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:49.400Z,1516417009.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:49.804Z,1516417009.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:50.212Z,1516417010.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:50.612Z,1516417010.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:51.003Z,1516417011.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:51.413Z,1516417011.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:51.819Z,1516417011.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:52.191Z,1516417012.191 [NAL9602](INFO): NAL9602 initialized
2018-01-20T02:56:52.214Z,1516417012.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:52.617Z,1516417012.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:52.980Z,1516417012.980 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T02:56:52.980Z,1516417012.980 [NAL9602] Data Fault, FailCount= 4
2018-01-20T02:56:52.980Z,1516417012.980 [NAL9602](ERROR): Data Fault
2018-01-20T02:56:53.015Z,1516417013.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:53.076Z,1516417013.076 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T02:56:53.386Z,1516417013.386 [NAL9602](INFO): Powering down
2018-01-20T02:56:53.412Z,1516417013.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:53.825Z,1516417013.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:54.203Z,1516417014.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:54.277Z,1516417014.277 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T02:56:54.277Z,1516417014.277 [NAL9602] No Fault, FailCount= 4
2018-01-20T02:56:54.604Z,1516417014.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:55.021Z,1516417015.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:55.403Z,1516417015.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:55.802Z,1516417015.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:56.211Z,1516417016.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:56.603Z,1516417016.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:57.016Z,1516417017.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:57.404Z,1516417017.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:57.802Z,1516417017.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:58.216Z,1516417018.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:58.614Z,1516417018.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:59.012Z,1516417019.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:59.415Z,1516417019.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:56:59.820Z,1516417019.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:00.219Z,1516417020.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:00.621Z,1516417020.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:01.014Z,1516417021.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:01.416Z,1516417021.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:01.800Z,1516417021.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:02.221Z,1516417022.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:02.598Z,1516417022.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:03.014Z,1516417023.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:03.413Z,1516417023.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:03.812Z,1516417023.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:04.203Z,1516417024.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:04.615Z,1516417024.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:05.001Z,1516417025.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:05.419Z,1516417025.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:05.816Z,1516417025.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:06.211Z,1516417026.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:06.614Z,1516417026.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:07.013Z,1516417027.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:07.418Z,1516417027.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:07.817Z,1516417027.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:08.222Z,1516417028.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:08.618Z,1516417028.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:09.017Z,1516417029.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:09.414Z,1516417029.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:09.825Z,1516417029.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:10.227Z,1516417030.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:10.599Z,1516417030.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:11.025Z,1516417031.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:11.032Z,1516417031.032 [PNI_TCM](ERROR): CRC does not match. Expected:0x59020 got:0x428
2018-01-20T02:57:11.421Z,1516417031.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:11.801Z,1516417031.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:12.226Z,1516417032.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:12.603Z,1516417032.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:13.018Z,1516417033.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:13.423Z,1516417033.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:13.803Z,1516417033.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:14.199Z,1516417034.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:14.222Z,1516417034.222 [PNI_TCM](ERROR): CRC does not match. Expected:0x42196 got:0x8345
2018-01-20T02:57:14.599Z,1516417034.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:15.004Z,1516417035.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:15.399Z,1516417035.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:15.798Z,1516417035.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:16.198Z,1516417036.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:16.601Z,1516417036.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:16.998Z,1516417036.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:17.429Z,1516417037.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:17.804Z,1516417037.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:18.211Z,1516417038.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:18.603Z,1516417038.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:19.003Z,1516417039.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:19.403Z,1516417039.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:19.819Z,1516417039.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:20.213Z,1516417040.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:20.618Z,1516417040.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:21.019Z,1516417041.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:21.420Z,1516417041.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:21.817Z,1516417041.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:22.215Z,1516417042.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:22.615Z,1516417042.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:23.019Z,1516417043.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:23.412Z,1516417043.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:23.782Z,1516417043.782 [NAL9602](INFO): Powering up NAL9602
2018-01-20T02:57:23.816Z,1516417043.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:24.223Z,1516417044.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:24.621Z,1516417044.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:27.891Z,1516417047.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:28.023Z,1516417048.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:28.377Z,1516417048.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:28.776Z,1516417048.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:29.176Z,1516417049.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:29.580Z,1516417049.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:29.981Z,1516417049.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:30.367Z,1516417050.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:30.771Z,1516417050.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:31.167Z,1516417051.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:31.567Z,1516417051.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:31.971Z,1516417051.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:32.382Z,1516417052.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:32.767Z,1516417052.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:33.166Z,1516417053.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:33.567Z,1516417053.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:33.971Z,1516417053.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:34.386Z,1516417054.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:34.750Z,1516417054.750 [NAL9602](INFO): NAL9602 initialized
2018-01-20T02:57:34.766Z,1516417054.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:35.167Z,1516417055.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:35.578Z,1516417055.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:35.982Z,1516417055.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:36.395Z,1516417056.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:36.771Z,1516417056.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:37.167Z,1516417057.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:37.576Z,1516417057.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:37.982Z,1516417057.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:38.386Z,1516417058.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:38.786Z,1516417058.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:39.179Z,1516417059.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:39.571Z,1516417059.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:39.979Z,1516417059.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:40.372Z,1516417060.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:40.776Z,1516417060.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:41.180Z,1516417061.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:41.579Z,1516417061.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:41.979Z,1516417061.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:42.382Z,1516417062.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:42.786Z,1516417062.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:43.186Z,1516417063.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:43.590Z,1516417063.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:43.992Z,1516417063.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:44.383Z,1516417064.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:44.785Z,1516417064.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:45.171Z,1516417065.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:45.609Z,1516417065.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:45.973Z,1516417065.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:46.382Z,1516417066.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:46.780Z,1516417066.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:47.179Z,1516417067.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:47.590Z,1516417067.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:48.005Z,1516417068.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:48.404Z,1516417068.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:48.793Z,1516417068.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:49.192Z,1516417069.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:49.573Z,1516417069.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:49.973Z,1516417069.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:50.377Z,1516417070.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:50.782Z,1516417070.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:51.181Z,1516417071.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:51.581Z,1516417071.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:52.031Z,1516417072.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:52.373Z,1516417072.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:52.772Z,1516417072.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:53.184Z,1516417073.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:53.585Z,1516417073.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:53.984Z,1516417073.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:54.384Z,1516417074.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:54.787Z,1516417074.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:55.181Z,1516417075.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:55.582Z,1516417075.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:55.997Z,1516417075.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:56.372Z,1516417076.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:56.777Z,1516417076.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:57.180Z,1516417077.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:57.582Z,1516417077.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:57.983Z,1516417077.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:58.402Z,1516417078.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:58.788Z,1516417078.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:59.202Z,1516417079.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:59.590Z,1516417079.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:57:59.978Z,1516417079.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:00.373Z,1516417080.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:00.778Z,1516417080.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:01.181Z,1516417081.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:01.579Z,1516417081.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:01.991Z,1516417081.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:02.382Z,1516417082.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:02.775Z,1516417082.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:03.179Z,1516417083.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:03.590Z,1516417083.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:03.991Z,1516417083.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:04.392Z,1516417084.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:04.791Z,1516417084.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:05.168Z,1516417085.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:05.584Z,1516417085.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:05.972Z,1516417085.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:06.367Z,1516417086.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:06.776Z,1516417086.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:07.167Z,1516417087.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:07.575Z,1516417087.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:07.991Z,1516417087.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:08.371Z,1516417088.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:08.779Z,1516417088.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:09.202Z,1516417089.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:09.595Z,1516417089.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:09.982Z,1516417089.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:10.379Z,1516417090.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:10.776Z,1516417090.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:11.172Z,1516417091.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:11.583Z,1516417091.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:11.983Z,1516417091.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:12.372Z,1516417092.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:12.775Z,1516417092.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:13.177Z,1516417093.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:13.580Z,1516417093.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:13.986Z,1516417093.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:14.385Z,1516417094.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:14.790Z,1516417094.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:15.190Z,1516417095.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:15.574Z,1516417095.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:15.980Z,1516417095.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:16.374Z,1516417096.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:16.767Z,1516417096.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:17.164Z,1516417097.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:17.571Z,1516417097.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:17.975Z,1516417097.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:18.375Z,1516417098.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:18.771Z,1516417098.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:19.185Z,1516417099.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:19.586Z,1516417099.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:19.998Z,1516417099.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:20.390Z,1516417100.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:20.768Z,1516417100.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:21.171Z,1516417101.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:21.567Z,1516417101.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:21.971Z,1516417101.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:22.371Z,1516417102.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:22.771Z,1516417102.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:23.168Z,1516417103.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:23.575Z,1516417103.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:23.971Z,1516417103.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:24.382Z,1516417104.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:24.790Z,1516417104.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:28.086Z,1516417108.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:28.221Z,1516417108.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:28.578Z,1516417108.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:28.979Z,1516417108.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:29.390Z,1516417109.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:29.784Z,1516417109.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:30.198Z,1516417110.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:30.590Z,1516417110.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:30.967Z,1516417110.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:31.363Z,1516417111.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:31.761Z,1516417111.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:32.167Z,1516417112.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:32.588Z,1516417112.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:32.961Z,1516417112.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:33.367Z,1516417113.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:33.774Z,1516417113.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:34.176Z,1516417114.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:34.586Z,1516417114.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:34.990Z,1516417114.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:35.386Z,1516417115.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:35.789Z,1516417115.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:36.163Z,1516417116.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:36.562Z,1516417116.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:36.987Z,1516417116.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:37.371Z,1516417117.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:37.767Z,1516417117.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:38.170Z,1516417118.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:38.572Z,1516417118.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:38.968Z,1516417118.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:39.375Z,1516417119.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:39.782Z,1516417119.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:40.186Z,1516417120.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:40.590Z,1516417120.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:40.983Z,1516417120.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:41.362Z,1516417121.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:41.767Z,1516417121.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:42.167Z,1516417122.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:42.564Z,1516417122.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:42.967Z,1516417122.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:43.370Z,1516417123.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:43.767Z,1516417123.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:44.171Z,1516417124.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:44.567Z,1516417124.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:44.991Z,1516417124.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:45.378Z,1516417125.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:45.774Z,1516417125.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:46.174Z,1516417126.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:46.567Z,1516417126.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:46.967Z,1516417126.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:47.371Z,1516417127.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:47.767Z,1516417127.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:48.175Z,1516417128.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:48.575Z,1516417128.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:48.974Z,1516417128.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:49.376Z,1516417129.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:49.772Z,1516417129.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:50.185Z,1516417130.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:50.582Z,1516417130.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:50.984Z,1516417130.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:51.378Z,1516417131.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:51.767Z,1516417131.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:52.165Z,1516417132.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:52.576Z,1516417132.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:52.971Z,1516417132.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:53.363Z,1516417133.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:53.779Z,1516417133.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:54.163Z,1516417134.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:54.579Z,1516417134.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:54.979Z,1516417134.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:55.383Z,1516417135.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:55.778Z,1516417135.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:56.185Z,1516417136.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:56.582Z,1516417136.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:56.962Z,1516417136.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:57.371Z,1516417137.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:57.767Z,1516417137.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:58.165Z,1516417138.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:58.567Z,1516417138.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:58.979Z,1516417138.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:59.369Z,1516417139.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:58:59.779Z,1516417139.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:00.173Z,1516417140.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:00.580Z,1516417140.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:00.979Z,1516417140.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:01.387Z,1516417141.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:01.787Z,1516417141.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:02.203Z,1516417142.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:02.576Z,1516417142.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:02.963Z,1516417142.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:03.374Z,1516417143.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:03.772Z,1516417143.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:04.176Z,1516417144.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:04.567Z,1516417144.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:04.984Z,1516417144.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:05.362Z,1516417145.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:05.791Z,1516417145.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:06.183Z,1516417146.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:06.578Z,1516417146.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:06.992Z,1516417146.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:07.372Z,1516417147.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:07.767Z,1516417147.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:08.175Z,1516417148.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:08.572Z,1516417148.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:08.968Z,1516417148.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:09.374Z,1516417149.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:09.771Z,1516417149.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:10.179Z,1516417150.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:10.570Z,1516417150.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:10.611Z,1516417150.611 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T02:59:10.611Z,1516417150.611 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2018-01-20T02:59:10.611Z,1516417150.611 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T02:59:10.632Z,1516417150.632 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T02:59:10.994Z,1516417150.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:11.091Z,1516417151.091 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T02:59:11.091Z,1516417151.091 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2018-01-20T02:59:11.378Z,1516417151.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:11.429Z,1516417151.429 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T02:59:11.430Z,1516417151.430 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T02:59:11.430Z,1516417151.430 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T02:59:11.785Z,1516417151.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:12.186Z,1516417152.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:12.575Z,1516417152.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:12.975Z,1516417152.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:13.372Z,1516417153.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:13.768Z,1516417153.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:14.187Z,1516417154.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:14.563Z,1516417154.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:14.967Z,1516417154.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:15.373Z,1516417155.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:15.776Z,1516417155.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:16.185Z,1516417156.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:16.585Z,1516417156.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:17.002Z,1516417157.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:17.390Z,1516417157.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:17.767Z,1516417157.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:18.167Z,1516417158.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:18.571Z,1516417158.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:18.978Z,1516417158.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:19.371Z,1516417159.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:19.764Z,1516417159.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:20.171Z,1516417160.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:20.579Z,1516417160.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:20.967Z,1516417160.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:21.385Z,1516417161.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:21.797Z,1516417161.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:22.185Z,1516417162.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:22.596Z,1516417162.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:22.633Z,1516417162.633 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T02:59:22.987Z,1516417162.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:23.372Z,1516417163.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:23.775Z,1516417163.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:24.175Z,1516417164.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:24.567Z,1516417164.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:24.968Z,1516417164.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:28.254Z,1516417168.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:28.382Z,1516417168.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:28.770Z,1516417168.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:29.170Z,1516417169.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:29.559Z,1516417169.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:29.958Z,1516417169.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:30.359Z,1516417170.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:30.747Z,1516417170.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:31.156Z,1516417171.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:31.555Z,1516417171.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:31.954Z,1516417171.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:32.362Z,1516417172.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:32.760Z,1516417172.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:33.166Z,1516417173.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:33.569Z,1516417173.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:33.970Z,1516417173.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:34.366Z,1516417174.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:34.751Z,1516417174.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:35.155Z,1516417175.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:35.555Z,1516417175.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:35.953Z,1516417175.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:36.352Z,1516417176.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:36.747Z,1516417176.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:37.151Z,1516417177.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:37.552Z,1516417177.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:37.945Z,1516417177.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:38.362Z,1516417178.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:38.766Z,1516417178.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:39.162Z,1516417179.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:39.562Z,1516417179.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:39.952Z,1516417179.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:40.351Z,1516417180.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:40.755Z,1516417180.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:41.159Z,1516417181.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:41.560Z,1516417181.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:41.958Z,1516417181.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:42.360Z,1516417182.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:42.753Z,1516417182.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:43.157Z,1516417183.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:43.574Z,1516417183.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:43.966Z,1516417183.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:44.365Z,1516417184.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:44.775Z,1516417184.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:45.146Z,1516417185.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:45.551Z,1516417185.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:45.952Z,1516417185.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:46.347Z,1516417186.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:46.755Z,1516417186.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:47.152Z,1516417187.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:47.551Z,1516417187.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:47.958Z,1516417187.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:48.359Z,1516417188.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:48.774Z,1516417188.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:49.178Z,1516417189.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:49.573Z,1516417189.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:49.958Z,1516417189.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:50.357Z,1516417190.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:50.759Z,1516417190.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:51.154Z,1516417191.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:51.567Z,1516417191.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:51.948Z,1516417191.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:52.347Z,1516417192.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:52.752Z,1516417192.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:53.147Z,1516417193.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:53.547Z,1516417193.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:53.979Z,1516417193.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:54.357Z,1516417194.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:54.770Z,1516417194.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:55.171Z,1516417195.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:55.555Z,1516417195.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:55.955Z,1516417195.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:56.357Z,1516417196.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:56.755Z,1516417196.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:57.161Z,1516417197.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:57.565Z,1516417197.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:57.958Z,1516417197.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:58.350Z,1516417198.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:58.760Z,1516417198.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:59.169Z,1516417199.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:59.563Z,1516417199.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T02:59:59.972Z,1516417199.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:00.368Z,1516417200.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:00.746Z,1516417200.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:01.151Z,1516417201.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:01.547Z,1516417201.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:01.947Z,1516417201.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:02.351Z,1516417202.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:02.747Z,1516417202.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:03.162Z,1516417203.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:03.551Z,1516417203.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:03.947Z,1516417203.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:04.365Z,1516417204.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:04.770Z,1516417204.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:05.167Z,1516417205.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:05.566Z,1516417205.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:05.951Z,1516417205.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:06.347Z,1516417206.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:06.763Z,1516417206.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:07.171Z,1516417207.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:07.547Z,1516417207.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:07.955Z,1516417207.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:08.355Z,1516417208.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:08.751Z,1516417208.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:09.159Z,1516417209.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:09.569Z,1516417209.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:09.970Z,1516417209.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:10.369Z,1516417210.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:10.774Z,1516417210.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:11.151Z,1516417211.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:11.558Z,1516417211.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:11.955Z,1516417211.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:12.355Z,1516417212.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:12.763Z,1516417212.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:13.159Z,1516417213.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:13.556Z,1516417213.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:13.959Z,1516417213.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:14.354Z,1516417214.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:14.767Z,1516417214.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:15.170Z,1516417215.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:15.570Z,1516417215.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:15.967Z,1516417215.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:16.358Z,1516417216.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:16.754Z,1516417216.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:17.163Z,1516417217.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:17.562Z,1516417217.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:17.951Z,1516417217.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:18.347Z,1516417218.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:18.751Z,1516417218.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:19.163Z,1516417219.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:19.547Z,1516417219.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:19.972Z,1516417219.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:20.370Z,1516417220.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:20.767Z,1516417220.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:21.170Z,1516417221.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:21.551Z,1516417221.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:21.946Z,1516417221.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:22.367Z,1516417222.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:22.762Z,1516417222.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:23.147Z,1516417223.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:23.550Z,1516417223.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:23.971Z,1516417223.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:24.347Z,1516417224.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:24.388Z,1516417224.388 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T02:55:24.3Z
2018-01-20T03:00:24.388Z,1516417224.388 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T03:00:24.388Z,1516417224.388 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T03:00:24.751Z,1516417224.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:25.229Z,1516417225.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:28.582Z,1516417228.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:28.683Z,1516417228.683 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0152.lzma
2018-01-20T03:00:28.722Z,1516417228.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:29.102Z,1516417229.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:29.455Z,1516417229.455 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0152.lzma.bak
2018-01-20T03:00:29.455Z,1516417229.455 [DataOverHttps](INFO): SBD MOMSN=7725983
2018-01-20T03:00:29.502Z,1516417229.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:29.987Z,1516417229.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:30.285Z,1516417230.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:33.562Z,1516417233.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:33.700Z,1516417233.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:34.054Z,1516417234.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:34.462Z,1516417234.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:34.846Z,1516417234.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:35.250Z,1516417235.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:38.548Z,1516417238.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:38.650Z,1516417238.650 [DataOverHttps](INFO): Sending 253 bytes from file Logs/20180119T210901/Express0153.lzma
2018-01-20T03:00:38.690Z,1516417238.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:39.034Z,1516417239.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:39.391Z,1516417239.391 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0153.lzma.bak
2018-01-20T03:00:39.391Z,1516417239.391 [DataOverHttps](INFO): SBD MOMSN=7725985
2018-01-20T03:00:39.448Z,1516417239.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:39.919Z,1516417239.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:39.939Z,1516417239.939 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T03:00:39.940Z,1516417239.940 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T03:00:39.940Z,1516417239.940 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T03:00:40.222Z,1516417240.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:43.474Z,1516417243.474 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T03:00:43.492Z,1516417243.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:43.625Z,1516417243.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:43.982Z,1516417243.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:44.379Z,1516417244.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:44.774Z,1516417244.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:45.177Z,1516417245.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:45.574Z,1516417245.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:45.978Z,1516417245.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:46.374Z,1516417246.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:46.774Z,1516417246.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:47.164Z,1516417247.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:47.582Z,1516417247.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:47.982Z,1516417247.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:48.382Z,1516417248.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:48.766Z,1516417248.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:49.167Z,1516417249.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:49.567Z,1516417249.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:49.986Z,1516417249.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:50.371Z,1516417250.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:50.767Z,1516417250.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:51.170Z,1516417251.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:51.567Z,1516417251.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:51.971Z,1516417251.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:52.370Z,1516417252.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:52.774Z,1516417252.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:53.168Z,1516417253.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:53.566Z,1516417253.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:53.971Z,1516417253.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:54.367Z,1516417254.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:54.778Z,1516417254.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:55.175Z,1516417255.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:55.571Z,1516417255.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:55.982Z,1516417255.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:56.372Z,1516417256.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:56.775Z,1516417256.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:57.175Z,1516417257.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:57.587Z,1516417257.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:57.968Z,1516417257.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:58.374Z,1516417258.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:58.772Z,1516417258.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:59.168Z,1516417259.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:59.572Z,1516417259.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:00:59.969Z,1516417259.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:00.374Z,1516417260.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:00.774Z,1516417260.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:01.172Z,1516417261.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:01.574Z,1516417261.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:01.971Z,1516417261.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:02.371Z,1516417262.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:02.771Z,1516417262.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:03.178Z,1516417263.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:03.580Z,1516417263.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:03.978Z,1516417263.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:04.374Z,1516417264.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:04.774Z,1516417264.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:05.174Z,1516417265.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:05.574Z,1516417265.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:05.984Z,1516417265.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:06.374Z,1516417266.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:06.778Z,1516417266.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:07.177Z,1516417267.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:07.582Z,1516417267.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:07.978Z,1516417267.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:08.383Z,1516417268.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:08.767Z,1516417268.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:09.179Z,1516417269.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:09.574Z,1516417269.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:09.971Z,1516417269.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:10.366Z,1516417270.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:10.769Z,1516417270.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:11.174Z,1516417271.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:11.588Z,1516417271.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:11.969Z,1516417271.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:12.367Z,1516417272.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:12.767Z,1516417272.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:13.168Z,1516417273.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:13.571Z,1516417273.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:13.961Z,1516417273.961 [NAL9602](INFO): Powering down
2018-01-20T03:01:13.982Z,1516417273.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:14.371Z,1516417274.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:14.780Z,1516417274.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:15.180Z,1516417275.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:15.579Z,1516417275.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:15.983Z,1516417275.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:16.380Z,1516417276.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:16.777Z,1516417276.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:17.175Z,1516417277.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:17.580Z,1516417277.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:17.980Z,1516417277.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:18.375Z,1516417278.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:18.775Z,1516417278.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:19.175Z,1516417279.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:19.575Z,1516417279.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:19.978Z,1516417279.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:20.383Z,1516417280.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:20.782Z,1516417280.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:21.178Z,1516417281.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:21.574Z,1516417281.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:21.986Z,1516417281.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:22.374Z,1516417282.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:22.776Z,1516417282.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:23.175Z,1516417283.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:23.578Z,1516417283.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:23.978Z,1516417283.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:24.374Z,1516417284.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:24.775Z,1516417284.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:25.176Z,1516417285.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:25.575Z,1516417285.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:25.985Z,1516417285.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:26.382Z,1516417286.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:26.782Z,1516417286.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:27.178Z,1516417287.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:27.582Z,1516417287.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:27.982Z,1516417287.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:28.378Z,1516417288.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:28.767Z,1516417288.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:29.178Z,1516417289.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:29.570Z,1516417289.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:29.971Z,1516417289.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:30.382Z,1516417290.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:30.771Z,1516417290.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:31.168Z,1516417291.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:31.571Z,1516417291.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:31.970Z,1516417291.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:32.382Z,1516417292.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:32.771Z,1516417292.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:33.171Z,1516417293.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:33.567Z,1516417293.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:33.987Z,1516417293.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:34.371Z,1516417294.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:34.768Z,1516417294.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:35.171Z,1516417295.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:35.571Z,1516417295.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:35.968Z,1516417295.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:36.371Z,1516417296.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:36.771Z,1516417296.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:37.167Z,1516417297.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:37.571Z,1516417297.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:37.987Z,1516417297.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:38.367Z,1516417298.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:38.771Z,1516417298.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:39.171Z,1516417299.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:39.574Z,1516417299.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:39.975Z,1516417299.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:40.372Z,1516417300.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:43.653Z,1516417303.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:43.771Z,1516417303.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:44.149Z,1516417304.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:44.560Z,1516417304.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:44.954Z,1516417304.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:45.349Z,1516417305.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:45.744Z,1516417305.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:46.154Z,1516417306.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:46.555Z,1516417306.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:46.944Z,1516417306.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:47.347Z,1516417307.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:47.746Z,1516417307.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:48.147Z,1516417308.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:48.563Z,1516417308.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:48.946Z,1516417308.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:49.347Z,1516417309.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:49.747Z,1516417309.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:50.154Z,1516417310.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:50.547Z,1516417310.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:50.955Z,1516417310.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:51.354Z,1516417311.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:51.748Z,1516417311.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:52.150Z,1516417312.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:52.549Z,1516417312.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:52.960Z,1516417312.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:53.353Z,1516417313.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:53.750Z,1516417313.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:54.152Z,1516417314.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:54.550Z,1516417314.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:54.950Z,1516417314.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:55.347Z,1516417315.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:55.747Z,1516417315.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:56.147Z,1516417316.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:56.543Z,1516417316.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:56.951Z,1516417316.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:57.347Z,1516417317.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:57.744Z,1516417317.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:58.147Z,1516417318.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:58.559Z,1516417318.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:58.951Z,1516417318.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:59.351Z,1516417319.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:01:59.755Z,1516417319.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:00.147Z,1516417320.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:00.556Z,1516417320.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:00.953Z,1516417320.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:01.355Z,1516417321.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:01.753Z,1516417321.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:02.153Z,1516417322.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:02.554Z,1516417322.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:02.954Z,1516417322.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:03.350Z,1516417323.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:03.759Z,1516417323.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:04.159Z,1516417324.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:04.547Z,1516417324.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:04.947Z,1516417324.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:05.347Z,1516417325.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:05.767Z,1516417325.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:06.147Z,1516417326.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:06.551Z,1516417326.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:06.947Z,1516417326.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:07.347Z,1516417327.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:07.744Z,1516417327.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:08.147Z,1516417328.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:08.547Z,1516417328.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:08.948Z,1516417328.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:09.355Z,1516417329.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:09.753Z,1516417329.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:10.154Z,1516417330.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:10.559Z,1516417330.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:10.948Z,1516417330.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:11.345Z,1516417331.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:11.747Z,1516417331.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:11.784Z,1516417331.784 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:02:11.784Z,1516417331.784 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2018-01-20T03:02:11.784Z,1516417331.784 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:02:11.798Z,1516417331.798 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:02:12.156Z,1516417332.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:12.219Z,1516417332.219 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:02:12.219Z,1516417332.219 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2018-01-20T03:02:12.554Z,1516417332.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:12.580Z,1516417332.580 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:02:12.580Z,1516417332.580 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:02:12.580Z,1516417332.580 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:02:12.954Z,1516417332.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:13.359Z,1516417333.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:13.743Z,1516417333.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:14.147Z,1516417334.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:14.547Z,1516417334.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:14.944Z,1516417334.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:15.351Z,1516417335.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:15.747Z,1516417335.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:16.147Z,1516417336.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:16.547Z,1516417336.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:16.952Z,1516417336.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:17.341Z,1516417337.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:17.752Z,1516417337.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:18.147Z,1516417338.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:18.550Z,1516417338.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:18.951Z,1516417338.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:19.357Z,1516417339.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:19.752Z,1516417339.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:20.150Z,1516417340.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:20.543Z,1516417340.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:20.944Z,1516417340.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:21.366Z,1516417341.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:21.758Z,1516417341.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:22.150Z,1516417342.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:22.547Z,1516417342.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:22.949Z,1516417342.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:23.343Z,1516417343.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:23.747Z,1516417343.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:24.147Z,1516417344.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:24.550Z,1516417344.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:24.952Z,1516417344.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:25.358Z,1516417345.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:25.751Z,1516417345.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:26.154Z,1516417346.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:26.554Z,1516417346.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:26.944Z,1516417346.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:27.359Z,1516417347.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:27.747Z,1516417347.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:28.147Z,1516417348.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:28.547Z,1516417348.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:28.947Z,1516417348.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:29.343Z,1516417349.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:29.747Z,1516417349.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:30.147Z,1516417350.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:30.547Z,1516417350.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:30.947Z,1516417350.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:31.347Z,1516417351.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:31.744Z,1516417351.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:32.147Z,1516417352.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:32.554Z,1516417352.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:32.946Z,1516417352.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:33.355Z,1516417353.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:33.754Z,1516417353.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:34.151Z,1516417354.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:34.551Z,1516417354.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:34.953Z,1516417354.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:35.352Z,1516417355.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:35.749Z,1516417355.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:36.154Z,1516417356.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:36.554Z,1516417356.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:36.950Z,1516417356.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:37.358Z,1516417357.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:37.744Z,1516417357.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:38.147Z,1516417358.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:38.543Z,1516417358.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:38.944Z,1516417358.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:39.347Z,1516417359.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:39.747Z,1516417359.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:40.151Z,1516417360.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:40.553Z,1516417360.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:43.843Z,1516417363.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:43.957Z,1516417363.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:44.321Z,1516417364.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:44.718Z,1516417364.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:45.111Z,1516417365.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:45.511Z,1516417365.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:45.910Z,1516417365.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:46.311Z,1516417366.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:46.715Z,1516417366.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:47.118Z,1516417367.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:47.510Z,1516417367.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:47.909Z,1516417367.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:48.314Z,1516417368.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:48.700Z,1516417368.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:49.119Z,1516417369.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:49.507Z,1516417369.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:49.904Z,1516417369.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:50.307Z,1516417370.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:50.711Z,1516417370.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:51.104Z,1516417371.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:51.512Z,1516417371.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:51.903Z,1516417371.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:52.300Z,1516417372.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:52.707Z,1516417372.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:53.113Z,1516417373.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:53.511Z,1516417373.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:53.919Z,1516417373.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:54.311Z,1516417374.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:54.703Z,1516417374.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:55.119Z,1516417375.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:55.510Z,1516417375.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:55.907Z,1516417375.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:56.313Z,1516417376.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:56.710Z,1516417376.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:57.108Z,1516417377.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:57.510Z,1516417377.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:57.911Z,1516417377.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:58.311Z,1516417378.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:58.724Z,1516417378.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:59.103Z,1516417379.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:59.516Z,1516417379.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:02:59.923Z,1516417379.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:00.303Z,1516417380.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:00.703Z,1516417380.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:01.103Z,1516417381.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:01.503Z,1516417381.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:01.904Z,1516417381.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:02.310Z,1516417382.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:02.715Z,1516417382.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:03.100Z,1516417383.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:03.510Z,1516417383.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:03.915Z,1516417383.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:04.309Z,1516417384.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:04.715Z,1516417384.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:05.111Z,1516417385.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:05.515Z,1516417385.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:05.916Z,1516417385.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:06.311Z,1516417386.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:06.711Z,1516417386.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:07.128Z,1516417387.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:07.503Z,1516417387.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:07.903Z,1516417387.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:08.303Z,1516417388.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:08.703Z,1516417388.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:09.107Z,1516417389.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:09.511Z,1516417389.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:09.907Z,1516417389.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:10.310Z,1516417390.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:10.713Z,1516417390.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:11.111Z,1516417391.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:11.510Z,1516417391.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:11.914Z,1516417391.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:12.310Z,1516417392.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:12.710Z,1516417392.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:13.114Z,1516417393.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:13.503Z,1516417393.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:13.903Z,1516417393.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:14.314Z,1516417394.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:14.703Z,1516417394.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:15.103Z,1516417395.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:15.502Z,1516417395.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:15.903Z,1516417395.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:16.303Z,1516417396.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:16.715Z,1516417396.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:17.104Z,1516417397.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:17.518Z,1516417397.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:17.902Z,1516417397.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:18.318Z,1516417398.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:18.700Z,1516417398.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:19.102Z,1516417399.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:19.507Z,1516417399.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:19.903Z,1516417399.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:20.302Z,1516417400.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:20.707Z,1516417400.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:21.104Z,1516417401.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:21.510Z,1516417401.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:21.907Z,1516417401.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:22.303Z,1516417402.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:22.702Z,1516417402.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:23.111Z,1516417403.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:23.510Z,1516417403.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:23.907Z,1516417403.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:24.311Z,1516417404.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:24.704Z,1516417404.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:25.102Z,1516417405.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:25.511Z,1516417405.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:25.904Z,1516417405.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:26.311Z,1516417406.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:26.719Z,1516417406.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:27.112Z,1516417407.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:27.510Z,1516417407.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:27.911Z,1516417407.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:28.310Z,1516417408.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:28.714Z,1516417408.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:29.113Z,1516417409.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:29.518Z,1516417409.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:29.911Z,1516417409.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:30.319Z,1516417410.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:30.710Z,1516417410.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:31.114Z,1516417411.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:31.510Z,1516417411.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:31.910Z,1516417411.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:32.314Z,1516417412.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:32.713Z,1516417412.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:33.118Z,1516417413.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:33.514Z,1516417413.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:33.910Z,1516417413.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:34.303Z,1516417414.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:34.702Z,1516417414.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:35.119Z,1516417415.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:35.503Z,1516417415.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:35.926Z,1516417415.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:36.316Z,1516417416.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:36.703Z,1516417416.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:37.102Z,1516417417.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:37.519Z,1516417417.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:37.903Z,1516417417.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:38.315Z,1516417418.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:38.714Z,1516417418.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:39.103Z,1516417419.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:39.520Z,1516417419.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:39.900Z,1516417419.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:40.303Z,1516417420.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:40.707Z,1516417420.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:43.982Z,1516417423.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:44.099Z,1516417424.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:44.496Z,1516417424.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:44.901Z,1516417424.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:45.294Z,1516417425.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:45.699Z,1516417425.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:46.098Z,1516417426.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:46.494Z,1516417426.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:46.897Z,1516417426.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:47.300Z,1516417427.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:47.702Z,1516417427.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:48.102Z,1516417428.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:48.503Z,1516417428.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:48.894Z,1516417428.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:49.294Z,1516417429.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:49.703Z,1516417429.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:50.094Z,1516417430.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:50.498Z,1516417430.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:50.897Z,1516417430.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:51.302Z,1516417431.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:51.698Z,1516417431.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:52.103Z,1516417432.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:52.498Z,1516417432.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:52.899Z,1516417432.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:53.303Z,1516417433.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:53.687Z,1516417433.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:54.086Z,1516417434.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:54.503Z,1516417434.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:54.887Z,1516417434.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:55.307Z,1516417435.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:55.688Z,1516417435.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:56.086Z,1516417436.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:56.487Z,1516417436.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:56.887Z,1516417436.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:57.295Z,1516417437.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:57.709Z,1516417437.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:58.087Z,1516417438.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:58.487Z,1516417438.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:58.886Z,1516417438.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:59.288Z,1516417439.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:03:59.687Z,1516417439.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:00.090Z,1516417440.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:00.496Z,1516417440.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:00.894Z,1516417440.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:01.302Z,1516417441.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:01.690Z,1516417441.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:02.097Z,1516417442.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:02.500Z,1516417442.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:02.895Z,1516417442.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:03.295Z,1516417443.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:03.695Z,1516417443.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:04.103Z,1516417444.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:04.498Z,1516417444.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:04.898Z,1516417444.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:05.294Z,1516417445.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:05.698Z,1516417445.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:06.098Z,1516417446.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:06.502Z,1516417446.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:06.902Z,1516417446.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:07.303Z,1516417447.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:07.696Z,1516417447.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:08.094Z,1516417448.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:08.495Z,1516417448.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:08.896Z,1516417448.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:09.299Z,1516417449.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:09.698Z,1516417449.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:10.088Z,1516417450.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:10.491Z,1516417450.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:10.894Z,1516417450.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:11.284Z,1516417451.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:11.695Z,1516417451.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:12.095Z,1516417452.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:12.491Z,1516417452.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:12.898Z,1516417452.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:13.297Z,1516417453.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:13.696Z,1516417453.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:14.098Z,1516417454.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:14.494Z,1516417454.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:14.896Z,1516417454.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:15.299Z,1516417455.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:15.698Z,1516417455.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:16.101Z,1516417456.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:16.502Z,1516417456.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:16.902Z,1516417456.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:17.298Z,1516417457.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:17.699Z,1516417457.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:18.098Z,1516417458.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:18.497Z,1516417458.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:18.902Z,1516417458.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:19.297Z,1516417459.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:19.696Z,1516417459.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:20.101Z,1516417460.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:20.502Z,1516417460.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:20.896Z,1516417460.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:21.297Z,1516417461.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:21.701Z,1516417461.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:22.098Z,1516417462.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:22.506Z,1516417462.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:22.894Z,1516417462.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:23.298Z,1516417463.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:23.703Z,1516417463.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:24.103Z,1516417464.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:24.498Z,1516417464.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:24.905Z,1516417464.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:25.299Z,1516417465.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:25.698Z,1516417465.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:26.103Z,1516417466.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:26.496Z,1516417466.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:26.889Z,1516417466.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:27.303Z,1516417467.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:27.707Z,1516417467.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:28.087Z,1516417468.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:28.502Z,1516417468.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:28.892Z,1516417468.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:29.291Z,1516417469.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:29.706Z,1516417469.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:30.092Z,1516417470.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:30.496Z,1516417470.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:30.895Z,1516417470.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:31.291Z,1516417471.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:31.696Z,1516417471.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:32.096Z,1516417472.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:32.491Z,1516417472.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:32.895Z,1516417472.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:33.290Z,1516417473.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:33.699Z,1516417473.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:34.089Z,1516417474.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:34.495Z,1516417474.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:34.893Z,1516417474.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:34.901Z,1516417474.901 [PNI_TCM](ERROR): CRC does not match. Expected:0x56492 got:0x7489
2018-01-20T03:04:35.294Z,1516417475.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:35.686Z,1516417475.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:36.091Z,1516417476.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:36.497Z,1516417476.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:36.890Z,1516417476.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:37.299Z,1516417477.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:37.695Z,1516417477.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:38.102Z,1516417478.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:38.108Z,1516417478.108 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2018-01-20T03:04:38.502Z,1516417478.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:38.898Z,1516417478.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:39.291Z,1516417479.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:39.695Z,1516417479.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:40.097Z,1516417480.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:40.503Z,1516417480.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:40.898Z,1516417480.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:44.174Z,1516417484.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:44.304Z,1516417484.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:44.655Z,1516417484.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:45.066Z,1516417485.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:45.463Z,1516417485.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:45.857Z,1516417485.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:46.260Z,1516417486.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:46.659Z,1516417486.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:47.058Z,1516417487.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:47.465Z,1516417487.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:47.856Z,1516417487.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:48.255Z,1516417488.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:48.647Z,1516417488.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:49.046Z,1516417489.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:49.454Z,1516417489.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:49.858Z,1516417489.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:50.261Z,1516417490.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:50.664Z,1516417490.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:51.047Z,1516417491.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:51.459Z,1516417491.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:51.864Z,1516417491.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:52.247Z,1516417492.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:52.664Z,1516417492.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:53.065Z,1516417493.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:53.448Z,1516417493.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:53.847Z,1516417493.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:54.265Z,1516417494.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:54.647Z,1516417494.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:55.044Z,1516417495.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:55.455Z,1516417495.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:55.847Z,1516417495.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:56.244Z,1516417496.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:56.651Z,1516417496.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:57.047Z,1516417497.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:57.448Z,1516417497.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:57.851Z,1516417497.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:58.251Z,1516417498.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:58.658Z,1516417498.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:59.059Z,1516417499.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:59.454Z,1516417499.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:04:59.852Z,1516417499.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:00.256Z,1516417500.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:00.658Z,1516417500.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:01.055Z,1516417501.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:01.457Z,1516417501.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:01.855Z,1516417501.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:02.261Z,1516417502.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:02.662Z,1516417502.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:03.055Z,1516417503.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:03.454Z,1516417503.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:03.853Z,1516417503.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:04.263Z,1516417504.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:04.663Z,1516417504.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:05.054Z,1516417505.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:05.463Z,1516417505.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:05.848Z,1516417505.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:06.254Z,1516417506.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:06.647Z,1516417506.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:07.047Z,1516417507.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:07.454Z,1516417507.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:07.847Z,1516417507.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:08.244Z,1516417508.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:08.651Z,1516417508.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:09.047Z,1516417509.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:09.447Z,1516417509.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:09.871Z,1516417509.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:10.247Z,1516417510.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:10.654Z,1516417510.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:11.051Z,1516417511.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:11.454Z,1516417511.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:11.845Z,1516417511.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:12.252Z,1516417512.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:12.659Z,1516417512.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:12.701Z,1516417512.701 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:05:12.702Z,1516417512.702 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2018-01-20T03:05:12.702Z,1516417512.702 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:05:12.714Z,1516417512.714 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:05:13.051Z,1516417513.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:13.097Z,1516417513.097 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:05:13.097Z,1516417513.097 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2018-01-20T03:05:13.463Z,1516417513.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:13.497Z,1516417513.497 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:05:13.498Z,1516417513.498 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:05:13.498Z,1516417513.498 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:05:13.855Z,1516417513.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:14.255Z,1516417514.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:14.657Z,1516417514.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:15.055Z,1516417515.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:15.455Z,1516417515.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:15.859Z,1516417515.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:16.255Z,1516417516.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:16.659Z,1516417516.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:17.057Z,1516417517.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:17.455Z,1516417517.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:17.852Z,1516417517.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:18.254Z,1516417518.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:18.654Z,1516417518.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:19.054Z,1516417519.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:19.453Z,1516417519.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:19.863Z,1516417519.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:20.263Z,1516417520.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:20.654Z,1516417520.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:21.047Z,1516417521.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:21.447Z,1516417521.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:21.864Z,1516417521.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:22.247Z,1516417522.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:22.647Z,1516417522.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:23.051Z,1516417523.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:23.447Z,1516417523.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:23.847Z,1516417523.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:24.255Z,1516417524.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:24.647Z,1516417524.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:25.044Z,1516417525.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:25.447Z,1516417525.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:25.847Z,1516417525.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:26.255Z,1516417526.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:26.651Z,1516417526.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:27.047Z,1516417527.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:27.448Z,1516417527.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:27.850Z,1516417527.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:28.257Z,1516417528.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:28.651Z,1516417528.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:29.058Z,1516417529.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:29.459Z,1516417529.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:29.854Z,1516417529.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:30.263Z,1516417530.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:30.655Z,1516417530.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:31.055Z,1516417531.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:31.459Z,1516417531.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:31.860Z,1516417531.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:32.256Z,1516417532.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:32.664Z,1516417532.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:33.064Z,1516417533.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:33.447Z,1516417533.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:33.855Z,1516417533.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:34.251Z,1516417534.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:34.654Z,1516417534.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:35.046Z,1516417535.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:35.454Z,1516417535.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:35.848Z,1516417535.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:36.250Z,1516417536.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:36.647Z,1516417536.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:37.048Z,1516417537.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:37.454Z,1516417537.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:37.854Z,1516417537.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:38.254Z,1516417538.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:38.660Z,1516417538.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:39.055Z,1516417539.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:39.455Z,1516417539.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:39.858Z,1516417539.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:40.258Z,1516417540.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:40.278Z,1516417540.278 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T03:05:40.278Z,1516417540.278 [Default:CheckIn:C.Wait] Stopped
2018-01-20T03:05:40.278Z,1516417540.278 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T03:05:40.279Z,1516417540.279 [Default:CheckIn:D] Running Loop=1
2018-01-20T03:05:40.655Z,1516417540.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:40.675Z,1516417540.675 [Default:CheckIn:D] Stopped
2018-01-20T03:05:40.676Z,1516417540.676 [Default:CheckIn:E] Running Loop=1
2018-01-20T03:05:41.057Z,1516417541.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:41.106Z,1516417541.106 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.067497 min 
2018-01-20T03:05:41.106Z,1516417541.106 [Default:CheckIn:E] Stopped
2018-01-20T03:05:41.106Z,1516417541.106 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T03:05:41.106Z,1516417541.106 [Default:CheckIn] Stopped
2018-01-20T03:05:41.106Z,1516417541.106 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T03:05:41.106Z,1516417541.106 [Default:CheckIn](INFO): Running loop #7
2018-01-20T03:05:41.107Z,1516417541.107 [Default:CheckIn] Running Loop=7
2018-01-20T03:05:41.107Z,1516417541.107 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T03:05:41.107Z,1516417541.107 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T03:05:44.320Z,1516417544.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:44.422Z,1516417544.422 [NAL9602](INFO): Powering up
2018-01-20T03:05:44.440Z,1516417544.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:44.825Z,1516417544.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:45.223Z,1516417545.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:45.620Z,1516417545.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:46.023Z,1516417546.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:46.423Z,1516417546.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:46.821Z,1516417546.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:47.223Z,1516417547.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:47.615Z,1516417547.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:48.015Z,1516417548.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:48.431Z,1516417548.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:48.820Z,1516417548.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:49.217Z,1516417549.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:49.625Z,1516417549.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:50.018Z,1516417550.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:50.418Z,1516417550.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:50.818Z,1516417550.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:51.218Z,1516417551.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:51.618Z,1516417551.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:52.022Z,1516417552.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:52.418Z,1516417552.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:52.815Z,1516417552.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:53.222Z,1516417553.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:53.626Z,1516417553.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:54.018Z,1516417554.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:54.418Z,1516417554.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:54.819Z,1516417554.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:55.228Z,1516417555.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:55.598Z,1516417555.598 [NAL9602](INFO): NAL9602 initialized
2018-01-20T03:05:55.619Z,1516417555.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:56.023Z,1516417556.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:56.434Z,1516417556.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:56.836Z,1516417556.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:57.229Z,1516417557.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:57.611Z,1516417557.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:58.015Z,1516417558.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:58.415Z,1516417558.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:58.808Z,1516417558.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:59.212Z,1516417559.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:05:59.611Z,1516417559.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:00.019Z,1516417560.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:00.420Z,1516417560.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:00.819Z,1516417560.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:01.209Z,1516417561.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:01.618Z,1516417561.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:02.016Z,1516417562.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:02.419Z,1516417562.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:02.819Z,1516417562.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:03.220Z,1516417563.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:03.618Z,1516417563.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:04.013Z,1516417564.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:04.421Z,1516417564.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:04.808Z,1516417564.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:05.221Z,1516417565.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:05.619Z,1516417565.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:06.018Z,1516417566.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:06.442Z,1516417566.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:06.817Z,1516417566.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:07.208Z,1516417567.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:07.627Z,1516417567.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:08.015Z,1516417568.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:08.418Z,1516417568.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:08.810Z,1516417568.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:09.219Z,1516417569.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:09.611Z,1516417569.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:10.015Z,1516417570.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:10.415Z,1516417570.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:10.811Z,1516417570.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:11.211Z,1516417571.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:11.615Z,1516417571.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:12.011Z,1516417572.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:12.415Z,1516417572.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:12.815Z,1516417572.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:13.211Z,1516417573.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:13.610Z,1516417573.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:14.015Z,1516417574.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:14.411Z,1516417574.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:14.815Z,1516417574.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:15.219Z,1516417575.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:15.623Z,1516417575.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:16.022Z,1516417576.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:16.422Z,1516417576.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:16.820Z,1516417576.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:17.221Z,1516417577.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:17.627Z,1516417577.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:18.021Z,1516417578.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:18.420Z,1516417578.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:18.828Z,1516417578.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:19.220Z,1516417579.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:19.625Z,1516417579.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:20.028Z,1516417580.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:20.420Z,1516417580.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:20.818Z,1516417580.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:21.220Z,1516417581.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:21.621Z,1516417581.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:22.018Z,1516417582.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:22.424Z,1516417582.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:22.812Z,1516417582.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:23.211Z,1516417583.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:23.611Z,1516417583.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:24.026Z,1516417584.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:24.428Z,1516417584.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:24.811Z,1516417584.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:25.211Z,1516417585.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:25.615Z,1516417585.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:26.015Z,1516417586.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:26.411Z,1516417586.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:26.819Z,1516417586.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:27.211Z,1516417587.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:27.602Z,1516417587.602 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-01-20T03:06:27.685Z,1516417587.685 [NAL9602](FAULT): received: 
+CSQ:0

OK62, 2, 0, 0, 0

OK
2018-01-20T03:06:27.685Z,1516417587.685 [NAL9602] Data Fault, FailCount= 5
2018-01-20T03:06:27.685Z,1516417587.685 [NAL9602](ERROR): Data Fault
2018-01-20T03:06:27.703Z,1516417587.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:27.782Z,1516417587.782 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T03:06:27.783Z,1516417587.783 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-20T03:06:28.010Z,1516417588.010 [NAL9602](INFO): Powering down
2018-01-20T03:06:28.039Z,1516417588.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:28.090Z,1516417588.090 [CBIT](INFO): Critical error at 20180120T030627
2018-01-20T03:06:28.415Z,1516417588.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:28.818Z,1516417588.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:29.222Z,1516417589.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:29.615Z,1516417589.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:30.016Z,1516417590.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:30.416Z,1516417590.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:30.818Z,1516417590.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:31.218Z,1516417591.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:31.617Z,1516417591.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:32.019Z,1516417592.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:32.418Z,1516417592.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:32.817Z,1516417592.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:33.217Z,1516417593.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:33.618Z,1516417593.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:34.018Z,1516417594.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:34.418Z,1516417594.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:34.824Z,1516417594.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:35.221Z,1516417595.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:35.620Z,1516417595.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:36.025Z,1516417596.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:36.421Z,1516417596.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:36.817Z,1516417596.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:37.218Z,1516417597.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:37.621Z,1516417597.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:38.017Z,1516417598.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:38.418Z,1516417598.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:38.818Z,1516417598.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:39.218Z,1516417599.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:39.621Z,1516417599.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:40.017Z,1516417600.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:40.418Z,1516417600.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:40.831Z,1516417600.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:41.223Z,1516417601.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:44.497Z,1516417604.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:44.623Z,1516417604.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:44.987Z,1516417604.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:45.386Z,1516417605.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:45.785Z,1516417605.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:46.191Z,1516417606.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:46.590Z,1516417606.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:46.978Z,1516417606.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:47.378Z,1516417607.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:47.776Z,1516417607.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:48.185Z,1516417608.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:48.591Z,1516417608.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:48.983Z,1516417608.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:49.378Z,1516417609.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:49.782Z,1516417609.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:50.176Z,1516417610.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:50.578Z,1516417610.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:50.986Z,1516417610.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:51.376Z,1516417611.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:51.783Z,1516417611.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:52.186Z,1516417612.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:52.584Z,1516417612.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:52.986Z,1516417612.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:53.387Z,1516417613.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:53.783Z,1516417613.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:54.185Z,1516417614.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:54.585Z,1516417614.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:54.983Z,1516417614.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:55.382Z,1516417615.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:55.785Z,1516417615.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:56.178Z,1516417616.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:56.582Z,1516417616.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:56.978Z,1516417616.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:57.376Z,1516417617.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:57.786Z,1516417617.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:58.190Z,1516417618.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:58.582Z,1516417618.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:58.982Z,1516417618.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:59.386Z,1516417619.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:06:59.776Z,1516417619.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:00.186Z,1516417620.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:00.586Z,1516417620.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:00.978Z,1516417620.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:01.387Z,1516417621.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:01.787Z,1516417621.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:02.190Z,1516417622.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:02.590Z,1516417622.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:02.982Z,1516417622.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:03.374Z,1516417623.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:03.783Z,1516417623.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:04.179Z,1516417624.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:04.583Z,1516417624.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:04.983Z,1516417624.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:05.386Z,1516417625.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:05.782Z,1516417625.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:06.187Z,1516417626.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:06.587Z,1516417626.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:06.983Z,1516417626.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:07.382Z,1516417627.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:07.785Z,1516417627.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:08.186Z,1516417628.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:08.579Z,1516417628.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:08.979Z,1516417628.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:09.378Z,1516417629.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:09.779Z,1516417629.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:10.190Z,1516417630.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:10.574Z,1516417630.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:10.990Z,1516417630.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:11.390Z,1516417631.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:11.774Z,1516417631.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:12.179Z,1516417632.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:12.579Z,1516417632.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:12.991Z,1516417632.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:13.376Z,1516417633.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:13.779Z,1516417633.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:14.174Z,1516417634.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:14.575Z,1516417634.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:14.991Z,1516417634.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:15.385Z,1516417635.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:15.786Z,1516417635.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:16.185Z,1516417636.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:16.582Z,1516417636.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:16.982Z,1516417636.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:17.385Z,1516417637.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:17.791Z,1516417637.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:18.179Z,1516417638.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:18.583Z,1516417638.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:18.981Z,1516417638.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:19.376Z,1516417639.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:19.784Z,1516417639.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:20.175Z,1516417640.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:20.583Z,1516417640.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:20.983Z,1516417640.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:21.374Z,1516417641.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:21.776Z,1516417641.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:22.178Z,1516417642.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:22.574Z,1516417642.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:22.974Z,1516417642.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:23.390Z,1516417643.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:23.783Z,1516417643.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:24.183Z,1516417644.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:24.583Z,1516417644.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:24.994Z,1516417644.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:25.374Z,1516417645.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:25.785Z,1516417645.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:26.182Z,1516417646.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:26.582Z,1516417646.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:26.998Z,1516417646.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:27.374Z,1516417647.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:27.772Z,1516417647.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:28.182Z,1516417648.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:28.574Z,1516417648.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:28.972Z,1516417648.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:29.378Z,1516417649.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:29.774Z,1516417649.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:30.185Z,1516417650.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:30.589Z,1516417650.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:30.982Z,1516417650.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:31.378Z,1516417651.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:31.778Z,1516417651.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:32.174Z,1516417652.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:32.574Z,1516417652.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:32.978Z,1516417652.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:33.383Z,1516417653.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:33.779Z,1516417653.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:34.186Z,1516417654.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:34.582Z,1516417654.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:34.985Z,1516417654.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:35.386Z,1516417655.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:35.782Z,1516417655.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:36.185Z,1516417656.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:36.586Z,1516417656.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:36.982Z,1516417656.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:37.386Z,1516417657.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:37.782Z,1516417657.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:38.174Z,1516417658.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:38.574Z,1516417658.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:38.978Z,1516417658.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:39.378Z,1516417659.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:39.772Z,1516417659.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:40.179Z,1516417660.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:40.582Z,1516417660.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:40.984Z,1516417660.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:41.388Z,1516417661.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:44.808Z,1516417664.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:44.929Z,1516417664.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:45.301Z,1516417665.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:45.699Z,1516417665.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:46.098Z,1516417666.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:46.499Z,1516417666.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:46.902Z,1516417666.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:47.300Z,1516417667.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:47.705Z,1516417667.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:48.100Z,1516417668.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:48.500Z,1516417668.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:48.902Z,1516417668.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:49.299Z,1516417669.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:49.699Z,1516417669.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:50.098Z,1516417670.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:50.490Z,1516417670.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:50.890Z,1516417670.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:51.314Z,1516417671.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:51.690Z,1516417671.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:52.090Z,1516417672.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:52.498Z,1516417672.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:52.890Z,1516417672.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:53.302Z,1516417673.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:53.698Z,1516417673.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:54.090Z,1516417674.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:54.490Z,1516417674.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:54.898Z,1516417674.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:55.306Z,1516417675.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:55.690Z,1516417675.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:56.098Z,1516417676.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:56.490Z,1516417676.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:56.890Z,1516417676.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:57.294Z,1516417677.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:57.694Z,1516417677.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:58.090Z,1516417678.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:58.494Z,1516417678.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:58.890Z,1516417678.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:59.292Z,1516417679.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:07:59.694Z,1516417679.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:00.090Z,1516417680.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:00.490Z,1516417680.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:00.894Z,1516417680.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:01.290Z,1516417681.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:01.688Z,1516417681.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:02.094Z,1516417682.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:02.490Z,1516417682.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:02.894Z,1516417682.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:03.299Z,1516417683.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:03.699Z,1516417683.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:04.097Z,1516417684.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:04.500Z,1516417684.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:04.898Z,1516417684.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:05.299Z,1516417685.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:05.699Z,1516417685.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:06.098Z,1516417686.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:06.505Z,1516417686.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:06.907Z,1516417686.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:07.304Z,1516417687.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:07.699Z,1516417687.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:08.098Z,1516417688.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:08.498Z,1516417688.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:08.888Z,1516417688.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:09.298Z,1516417689.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:09.690Z,1516417689.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:10.091Z,1516417690.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:10.498Z,1516417690.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:10.890Z,1516417690.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:11.290Z,1516417691.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:11.706Z,1516417691.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:12.090Z,1516417692.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:12.490Z,1516417692.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:12.894Z,1516417692.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:13.298Z,1516417693.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:13.692Z,1516417693.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:13.727Z,1516417693.727 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:08:13.727Z,1516417693.727 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2018-01-20T03:08:13.727Z,1516417693.727 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:08:13.748Z,1516417693.748 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:08:14.094Z,1516417694.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:14.157Z,1516417694.157 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:08:14.157Z,1516417694.157 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2018-01-20T03:08:14.490Z,1516417694.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:14.508Z,1516417694.508 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:08:14.508Z,1516417694.508 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:08:14.508Z,1516417694.508 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:08:14.894Z,1516417694.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:15.300Z,1516417695.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:15.695Z,1516417695.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:16.098Z,1516417696.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:16.500Z,1516417696.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:16.898Z,1516417696.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:17.299Z,1516417697.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:17.701Z,1516417697.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:18.102Z,1516417698.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:18.503Z,1516417698.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:18.902Z,1516417698.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:19.299Z,1516417699.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:19.698Z,1516417699.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:20.102Z,1516417700.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:20.498Z,1516417700.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:20.899Z,1516417700.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:21.303Z,1516417701.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:21.698Z,1516417701.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:22.105Z,1516417702.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:22.501Z,1516417702.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:22.898Z,1516417702.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:23.299Z,1516417703.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:23.703Z,1516417703.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:24.099Z,1516417704.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:24.499Z,1516417704.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:24.898Z,1516417704.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:25.303Z,1516417705.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:25.699Z,1516417705.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:26.103Z,1516417706.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:26.498Z,1516417706.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:26.899Z,1516417706.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:27.302Z,1516417707.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:27.698Z,1516417707.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:27.729Z,1516417707.729 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T03:08:27.730Z,1516417707.730 [NAL9602] No Fault, FailCount= 5
2018-01-20T03:08:28.074Z,1516417708.074 [NAL9602](INFO): Powering up NAL9602
2018-01-20T03:08:28.092Z,1516417708.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:28.498Z,1516417708.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:28.924Z,1516417708.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:29.326Z,1516417709.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:29.699Z,1516417709.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:30.096Z,1516417710.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:30.495Z,1516417710.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:30.910Z,1516417710.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:31.303Z,1516417711.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:31.692Z,1516417711.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:32.125Z,1516417712.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:32.543Z,1516417712.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:32.896Z,1516417712.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:33.295Z,1516417713.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:33.712Z,1516417713.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:34.109Z,1516417714.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:34.504Z,1516417714.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:34.903Z,1516417714.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:35.304Z,1516417715.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:35.702Z,1516417715.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:36.103Z,1516417716.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:36.505Z,1516417716.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:36.905Z,1516417716.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:37.302Z,1516417717.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:37.695Z,1516417717.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:38.098Z,1516417718.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:38.508Z,1516417718.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:38.883Z,1516417718.883 [NAL9602](INFO): NAL9602 initialized
2018-01-20T03:08:38.902Z,1516417718.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:39.297Z,1516417719.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:39.694Z,1516417719.694 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T03:08:39.694Z,1516417719.694 [NAL9602] Data Fault, FailCount= 1
2018-01-20T03:08:39.694Z,1516417719.694 [NAL9602](ERROR): Data Fault
2018-01-20T03:08:39.740Z,1516417719.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:39.878Z,1516417719.878 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T03:08:40.078Z,1516417720.078 [NAL9602](INFO): Powering down
2018-01-20T03:08:40.098Z,1516417720.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:40.496Z,1516417720.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:40.904Z,1516417720.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:41.020Z,1516417721.020 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T03:08:41.020Z,1516417721.020 [NAL9602] No Fault, FailCount= 1
2018-01-20T03:08:41.307Z,1516417721.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:41.708Z,1516417721.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:48.192Z,1516417728.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:48.365Z,1516417728.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:48.767Z,1516417728.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:49.168Z,1516417729.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:49.584Z,1516417729.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:49.980Z,1516417729.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:50.352Z,1516417730.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:50.755Z,1516417730.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:51.163Z,1516417731.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:51.555Z,1516417731.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:51.963Z,1516417731.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:52.361Z,1516417732.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:52.754Z,1516417732.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:53.160Z,1516417733.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:53.567Z,1516417733.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:53.957Z,1516417733.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:54.363Z,1516417734.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:54.764Z,1516417734.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:55.162Z,1516417735.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:55.562Z,1516417735.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:55.984Z,1516417735.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:56.363Z,1516417736.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:56.761Z,1516417736.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:57.166Z,1516417737.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:57.562Z,1516417737.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:57.962Z,1516417737.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:58.362Z,1516417738.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:58.758Z,1516417738.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:59.163Z,1516417739.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:59.563Z,1516417739.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:08:59.960Z,1516417739.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:00.363Z,1516417740.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:00.762Z,1516417740.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:01.162Z,1516417741.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:01.568Z,1516417741.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:01.966Z,1516417741.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:02.363Z,1516417742.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:02.762Z,1516417742.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:03.162Z,1516417743.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:03.562Z,1516417743.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:03.967Z,1516417743.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:04.362Z,1516417744.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:04.752Z,1516417744.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:05.165Z,1516417745.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:05.571Z,1516417745.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:05.952Z,1516417745.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:06.372Z,1516417746.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:06.767Z,1516417746.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:07.155Z,1516417747.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:07.566Z,1516417747.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:07.962Z,1516417747.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:08.356Z,1516417748.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:08.762Z,1516417748.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:09.171Z,1516417749.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:09.555Z,1516417749.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:09.962Z,1516417749.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:10.346Z,1516417750.346 [NAL9602](INFO): Powering up NAL9602
2018-01-20T03:09:10.374Z,1516417750.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:10.756Z,1516417750.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:11.163Z,1516417751.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:11.559Z,1516417751.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:11.954Z,1516417751.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:12.359Z,1516417752.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:12.767Z,1516417752.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:13.155Z,1516417753.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:13.571Z,1516417753.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:13.968Z,1516417753.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:14.364Z,1516417754.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:14.768Z,1516417754.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:15.165Z,1516417755.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:15.567Z,1516417755.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:15.971Z,1516417755.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:16.365Z,1516417756.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:16.767Z,1516417756.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:17.165Z,1516417757.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:17.565Z,1516417757.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:17.964Z,1516417757.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:18.365Z,1516417758.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:18.765Z,1516417758.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:19.164Z,1516417759.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:19.565Z,1516417759.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:19.966Z,1516417759.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:20.368Z,1516417760.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:20.758Z,1516417760.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:21.178Z,1516417761.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:21.543Z,1516417761.543 [NAL9602](INFO): NAL9602 initialized
2018-01-20T03:09:21.578Z,1516417761.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:21.973Z,1516417761.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:22.383Z,1516417762.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:22.783Z,1516417762.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:22.832Z,1516417762.832 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T03:09:23.170Z,1516417763.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:23.564Z,1516417763.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:23.960Z,1516417763.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:24.383Z,1516417764.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:24.778Z,1516417764.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:25.182Z,1516417765.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:25.555Z,1516417765.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:25.959Z,1516417765.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:26.354Z,1516417766.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:26.759Z,1516417766.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:27.159Z,1516417767.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:27.567Z,1516417767.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:27.967Z,1516417767.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:28.367Z,1516417768.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:28.771Z,1516417768.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:29.175Z,1516417769.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:29.579Z,1516417769.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:29.984Z,1516417769.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:30.376Z,1516417770.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:30.759Z,1516417770.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:31.154Z,1516417771.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:31.555Z,1516417771.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:31.963Z,1516417771.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:32.354Z,1516417772.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:32.755Z,1516417772.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:33.159Z,1516417773.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:33.554Z,1516417773.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:33.959Z,1516417773.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:34.378Z,1516417774.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:34.770Z,1516417774.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:35.178Z,1516417775.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:35.578Z,1516417775.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:35.965Z,1516417775.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:36.367Z,1516417776.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:36.764Z,1516417776.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:37.168Z,1516417777.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:37.570Z,1516417777.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:37.959Z,1516417777.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:38.354Z,1516417778.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:38.755Z,1516417778.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:39.159Z,1516417779.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:39.569Z,1516417779.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:39.982Z,1516417779.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:40.377Z,1516417780.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:40.774Z,1516417780.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:41.155Z,1516417781.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:41.559Z,1516417781.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:41.956Z,1516417781.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:45.254Z,1516417785.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:45.388Z,1516417785.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:45.766Z,1516417785.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:46.172Z,1516417786.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:46.186Z,1516417786.186 [PNI_TCM](ERROR): CRC does not match. Expected:0x11937 got:0x40455
2018-01-20T03:09:46.557Z,1516417786.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:46.958Z,1516417786.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:47.349Z,1516417787.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:47.758Z,1516417787.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:48.154Z,1516417788.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:48.552Z,1516417788.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:48.956Z,1516417788.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:49.355Z,1516417789.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:49.750Z,1516417789.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:50.170Z,1516417790.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:50.561Z,1516417790.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:50.970Z,1516417790.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:51.372Z,1516417791.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:51.747Z,1516417791.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:52.151Z,1516417792.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:52.547Z,1516417792.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:52.943Z,1516417792.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:53.344Z,1516417793.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:53.751Z,1516417793.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:54.143Z,1516417794.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:54.551Z,1516417794.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:54.947Z,1516417794.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:55.354Z,1516417795.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:55.767Z,1516417795.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:56.166Z,1516417796.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:56.566Z,1516417796.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:56.940Z,1516417796.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:57.383Z,1516417797.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:57.747Z,1516417797.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:58.147Z,1516417798.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:58.547Z,1516417798.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:58.952Z,1516417798.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:59.344Z,1516417799.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:09:59.759Z,1516417799.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:00.155Z,1516417800.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:00.570Z,1516417800.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:00.958Z,1516417800.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:01.358Z,1516417801.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:01.762Z,1516417801.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:02.155Z,1516417802.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:02.554Z,1516417802.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:02.943Z,1516417802.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:03.350Z,1516417803.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:03.755Z,1516417803.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:04.156Z,1516417804.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:04.550Z,1516417804.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:04.958Z,1516417804.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:05.340Z,1516417805.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:05.770Z,1516417805.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:06.162Z,1516417806.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:06.562Z,1516417806.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:06.970Z,1516417806.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:07.343Z,1516417807.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:07.743Z,1516417807.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:08.147Z,1516417808.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:08.543Z,1516417808.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:08.944Z,1516417808.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:09.351Z,1516417809.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:09.747Z,1516417809.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:10.143Z,1516417810.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:10.547Z,1516417810.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:10.966Z,1516417810.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:11.362Z,1516417811.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:11.766Z,1516417811.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:12.162Z,1516417812.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:12.554Z,1516417812.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:12.954Z,1516417812.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:13.353Z,1516417813.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:13.755Z,1516417813.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:14.154Z,1516417814.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:14.554Z,1516417814.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:14.952Z,1516417814.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:15.350Z,1516417815.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:15.755Z,1516417815.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:16.164Z,1516417816.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:16.562Z,1516417816.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:16.962Z,1516417816.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:17.360Z,1516417817.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:17.758Z,1516417817.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:18.147Z,1516417818.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:18.561Z,1516417818.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:18.947Z,1516417818.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:19.343Z,1516417819.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:19.744Z,1516417819.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:20.143Z,1516417820.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:20.547Z,1516417820.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:20.944Z,1516417820.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:21.358Z,1516417821.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:21.766Z,1516417821.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:22.166Z,1516417822.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:22.577Z,1516417822.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:22.963Z,1516417822.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:23.349Z,1516417823.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:23.751Z,1516417823.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:24.155Z,1516417824.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:24.558Z,1516417824.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:24.954Z,1516417824.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:25.359Z,1516417825.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:25.754Z,1516417825.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:26.155Z,1516417826.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:26.566Z,1516417826.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:26.962Z,1516417826.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:27.360Z,1516417827.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:27.766Z,1516417827.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:28.143Z,1516417828.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:28.547Z,1516417828.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:28.951Z,1516417828.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:29.343Z,1516417829.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:29.746Z,1516417829.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:30.155Z,1516417830.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:30.550Z,1516417830.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:30.952Z,1516417830.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:31.359Z,1516417831.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:31.758Z,1516417831.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:32.156Z,1516417832.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:32.562Z,1516417832.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:32.962Z,1516417832.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:33.350Z,1516417833.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:33.755Z,1516417833.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:34.143Z,1516417834.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:34.542Z,1516417834.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:34.966Z,1516417834.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:35.344Z,1516417835.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:35.750Z,1516417835.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:36.143Z,1516417836.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:36.560Z,1516417836.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:36.966Z,1516417836.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:37.365Z,1516417837.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:37.763Z,1516417837.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:38.165Z,1516417838.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:38.543Z,1516417838.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:38.944Z,1516417838.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:39.342Z,1516417839.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:39.391Z,1516417839.391 [CBIT](IMPORTANT): Beginning ground fault scan
2018-01-20T03:10:39.747Z,1516417839.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:40.150Z,1516417840.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:40.547Z,1516417840.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:40.947Z,1516417840.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:41.344Z,1516417841.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:41.386Z,1516417841.386 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T03:05:41.1Z
2018-01-20T03:10:41.386Z,1516417841.386 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T03:10:41.386Z,1516417841.386 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T03:10:41.747Z,1516417841.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:42.222Z,1516417842.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:45.498Z,1516417845.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:45.647Z,1516417845.647 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180119T210901/Courier0156.lzma
2018-01-20T03:10:45.698Z,1516417845.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:46.089Z,1516417846.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:46.447Z,1516417846.447 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0156.lzma.bak
2018-01-20T03:10:46.447Z,1516417846.447 [DataOverHttps](INFO): SBD MOMSN=7726010
2018-01-20T03:10:46.491Z,1516417846.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:46.983Z,1516417846.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:47.276Z,1516417847.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:50.558Z,1516417850.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:50.756Z,1516417850.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:51.161Z,1516417851.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:51.562Z,1516417851.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:51.947Z,1516417851.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:52.356Z,1516417852.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:55.626Z,1516417855.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:55.780Z,1516417855.780 [DataOverHttps](INFO): Sending 278 bytes from file Logs/20180119T210901/Express0157.lzma
2018-01-20T03:10:55.832Z,1516417855.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:56.221Z,1516417856.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:56.583Z,1516417856.583 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0157.lzma.bak
2018-01-20T03:10:56.583Z,1516417856.583 [DataOverHttps](INFO): SBD MOMSN=7726013
2018-01-20T03:10:56.640Z,1516417856.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:57.124Z,1516417857.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:57.150Z,1516417857.150 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T03:10:57.150Z,1516417857.150 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T03:10:57.150Z,1516417857.150 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T03:10:57.408Z,1516417857.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:10:57.499Z,1516417857.499 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.016327
CHAN A1 (24V): -0.019303
CHAN A2 (12V): 0.000259
CHAN A3 (5V): -0.001831
CHAN B0 (3.3V): -0.000830
CHAN B1 (3.15aV): -0.001349
CHAN B2 (3.15bV): -0.001538
CHAN B3 (GND): -0.002072
OPEN: 0.003961
Full Scale Calc: 4.765 mA, -1.589 mA
2018-01-20T03:11:00.685Z,1516417860.685 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T03:11:00.705Z,1516417860.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:00.827Z,1516417860.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:01.203Z,1516417861.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:01.599Z,1516417861.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:01.987Z,1516417861.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:02.387Z,1516417862.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:02.787Z,1516417862.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:03.187Z,1516417863.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:03.590Z,1516417863.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:03.991Z,1516417863.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:04.391Z,1516417864.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:04.795Z,1516417864.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:05.195Z,1516417865.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:05.594Z,1516417865.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:05.995Z,1516417865.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:06.400Z,1516417866.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:06.792Z,1516417866.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:07.194Z,1516417867.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:07.600Z,1516417867.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:07.992Z,1516417867.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:08.400Z,1516417868.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:08.800Z,1516417868.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:09.191Z,1516417869.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:09.598Z,1516417869.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:09.997Z,1516417869.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:10.396Z,1516417870.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:10.798Z,1516417870.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:11.203Z,1516417871.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:11.594Z,1516417871.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:11.995Z,1516417871.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:12.404Z,1516417872.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:12.795Z,1516417872.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:13.193Z,1516417873.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:13.599Z,1516417873.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:13.995Z,1516417873.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:14.398Z,1516417874.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:14.810Z,1516417874.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:14.830Z,1516417874.830 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:11:14.830Z,1516417874.830 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2018-01-20T03:11:14.830Z,1516417874.830 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:11:14.859Z,1516417874.859 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:11:15.187Z,1516417875.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:15.255Z,1516417875.255 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:11:15.255Z,1516417875.255 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2018-01-20T03:11:15.594Z,1516417875.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:15.623Z,1516417875.623 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:11:15.623Z,1516417875.623 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:11:15.623Z,1516417875.623 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:11:15.995Z,1516417875.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:16.387Z,1516417876.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:16.790Z,1516417876.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:17.195Z,1516417877.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:17.591Z,1516417877.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:17.990Z,1516417877.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:18.391Z,1516417878.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:18.787Z,1516417878.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:19.187Z,1516417879.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:19.596Z,1516417879.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:19.987Z,1516417879.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:20.391Z,1516417880.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:20.788Z,1516417880.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:21.192Z,1516417881.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:21.597Z,1516417881.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:21.997Z,1516417881.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:22.394Z,1516417882.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:22.795Z,1516417882.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:23.193Z,1516417883.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:23.598Z,1516417883.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:23.998Z,1516417883.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:24.399Z,1516417884.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:24.796Z,1516417884.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:25.194Z,1516417885.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:25.603Z,1516417885.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:26.001Z,1516417886.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:26.403Z,1516417886.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:26.795Z,1516417886.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:27.195Z,1516417887.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:27.595Z,1516417887.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:28.003Z,1516417888.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:28.403Z,1516417888.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:28.794Z,1516417888.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:29.196Z,1516417889.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:29.599Z,1516417889.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:29.998Z,1516417889.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:30.396Z,1516417890.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:30.794Z,1516417890.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:31.174Z,1516417891.174 [NAL9602](INFO): Powering down
2018-01-20T03:11:31.202Z,1516417891.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:31.587Z,1516417891.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:32.002Z,1516417892.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:32.390Z,1516417892.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:32.788Z,1516417892.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:33.187Z,1516417893.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:33.590Z,1516417893.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:33.987Z,1516417893.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:34.402Z,1516417894.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:34.791Z,1516417894.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:35.187Z,1516417895.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:35.587Z,1516417895.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:35.994Z,1516417895.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:36.388Z,1516417896.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:36.795Z,1516417896.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:37.192Z,1516417897.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:37.598Z,1516417897.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:37.998Z,1516417897.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:38.398Z,1516417898.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:38.787Z,1516417898.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:39.202Z,1516417899.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:39.595Z,1516417899.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:39.999Z,1516417899.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:40.399Z,1516417900.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:40.798Z,1516417900.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:41.195Z,1516417901.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:41.599Z,1516417901.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:41.998Z,1516417901.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:42.395Z,1516417902.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:42.797Z,1516417902.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:43.198Z,1516417903.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:43.599Z,1516417903.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:44.004Z,1516417904.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:44.398Z,1516417904.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:44.795Z,1516417904.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:45.199Z,1516417905.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:45.598Z,1516417905.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:45.998Z,1516417905.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:46.394Z,1516417906.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:46.794Z,1516417906.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:47.190Z,1516417907.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:47.595Z,1516417907.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:47.991Z,1516417907.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:48.388Z,1516417908.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:48.792Z,1516417908.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:49.199Z,1516417909.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:49.591Z,1516417909.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:49.995Z,1516417909.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:50.401Z,1516417910.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:50.791Z,1516417910.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:51.196Z,1516417911.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:51.595Z,1516417911.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:51.996Z,1516417911.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:52.396Z,1516417912.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:52.803Z,1516417912.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:53.196Z,1516417913.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:53.602Z,1516417913.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:53.000Z,1516417914.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:54.399Z,1516417914.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:54.797Z,1516417914.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:55.196Z,1516417915.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:55.597Z,1516417915.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:56.004Z,1516417916.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:56.397Z,1516417916.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:56.806Z,1516417916.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:57.198Z,1516417917.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:11:57.608Z,1516417917.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:00.865Z,1516417920.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:00.984Z,1516417920.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:01.362Z,1516417921.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:01.767Z,1516417921.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:02.162Z,1516417922.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:02.575Z,1516417922.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:02.956Z,1516417922.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:03.368Z,1516417923.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:03.762Z,1516417923.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:04.155Z,1516417924.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:04.571Z,1516417924.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:04.962Z,1516417924.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:05.355Z,1516417925.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:05.762Z,1516417925.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:06.162Z,1516417926.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:06.555Z,1516417926.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:06.962Z,1516417926.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:07.366Z,1516417927.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:07.755Z,1516417927.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:08.171Z,1516417928.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:08.562Z,1516417928.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:08.971Z,1516417928.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:09.359Z,1516417929.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:09.759Z,1516417929.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:10.155Z,1516417930.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:10.571Z,1516417930.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:10.972Z,1516417930.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:11.359Z,1516417931.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:11.770Z,1516417931.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:12.158Z,1516417932.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:12.559Z,1516417932.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:12.959Z,1516417932.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:13.363Z,1516417933.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:13.755Z,1516417933.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:14.164Z,1516417934.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:14.558Z,1516417934.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:14.955Z,1516417934.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:15.356Z,1516417935.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:15.758Z,1516417935.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:16.155Z,1516417936.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:16.555Z,1516417936.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:16.963Z,1516417936.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:17.364Z,1516417937.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:17.761Z,1516417937.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:18.164Z,1516417938.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:18.564Z,1516417938.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:18.964Z,1516417938.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:19.371Z,1516417939.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:19.772Z,1516417939.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:20.172Z,1516417940.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:20.562Z,1516417940.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:20.963Z,1516417940.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:21.363Z,1516417941.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:21.761Z,1516417941.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:22.155Z,1516417942.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:22.555Z,1516417942.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:22.962Z,1516417942.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:23.370Z,1516417943.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:23.756Z,1516417943.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:24.163Z,1516417944.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:24.555Z,1516417944.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:24.954Z,1516417944.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:25.363Z,1516417945.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:25.755Z,1516417945.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:26.155Z,1516417946.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:26.563Z,1516417946.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:26.963Z,1516417946.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:27.356Z,1516417947.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:27.767Z,1516417947.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:28.167Z,1516417948.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:28.559Z,1516417948.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:28.963Z,1516417948.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:29.364Z,1516417949.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:29.761Z,1516417949.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:30.163Z,1516417950.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:30.562Z,1516417950.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:30.968Z,1516417950.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:31.365Z,1516417951.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:31.770Z,1516417951.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:32.164Z,1516417952.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:32.565Z,1516417952.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:32.971Z,1516417952.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:33.364Z,1516417953.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:33.761Z,1516417953.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:34.163Z,1516417954.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:34.571Z,1516417954.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:34.965Z,1516417954.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:35.362Z,1516417955.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:35.762Z,1516417955.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:36.161Z,1516417956.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:36.570Z,1516417956.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:36.966Z,1516417956.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:37.359Z,1516417957.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:37.755Z,1516417957.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:38.159Z,1516417958.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:38.559Z,1516417958.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:38.955Z,1516417958.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:39.352Z,1516417959.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:39.759Z,1516417959.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:40.155Z,1516417960.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:40.562Z,1516417960.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:40.959Z,1516417960.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:41.355Z,1516417961.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:41.756Z,1516417961.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:42.159Z,1516417962.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:42.562Z,1516417962.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:42.952Z,1516417962.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:43.359Z,1516417963.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:43.759Z,1516417963.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:44.159Z,1516417964.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:44.571Z,1516417964.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:44.967Z,1516417964.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:45.364Z,1516417965.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:45.765Z,1516417965.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:46.162Z,1516417966.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:46.562Z,1516417966.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:46.963Z,1516417966.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:47.366Z,1516417967.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:47.762Z,1516417967.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:48.176Z,1516417968.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:48.562Z,1516417968.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:48.963Z,1516417968.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:49.361Z,1516417969.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:49.771Z,1516417969.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:50.172Z,1516417970.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:50.562Z,1516417970.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:50.971Z,1516417970.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:51.353Z,1516417971.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:51.755Z,1516417971.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:52.155Z,1516417972.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:52.563Z,1516417972.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:52.954Z,1516417972.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:53.355Z,1516417973.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:53.756Z,1516417973.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:54.166Z,1516417974.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:54.555Z,1516417974.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:54.953Z,1516417974.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:55.355Z,1516417975.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:55.759Z,1516417975.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:56.167Z,1516417976.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:56.564Z,1516417976.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:56.961Z,1516417976.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:57.361Z,1516417977.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:12:57.763Z,1516417977.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:01.030Z,1516417981.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:01.158Z,1516417981.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:01.526Z,1516417981.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:01.925Z,1516417981.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:02.323Z,1516417982.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:02.734Z,1516417982.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:03.132Z,1516417983.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:03.527Z,1516417983.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:03.925Z,1516417983.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:04.311Z,1516417984.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:04.711Z,1516417984.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:05.129Z,1516417985.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:05.511Z,1516417985.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:05.909Z,1516417985.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:06.311Z,1516417986.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:06.725Z,1516417986.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:07.108Z,1516417987.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:07.524Z,1516417987.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:07.924Z,1516417987.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:08.312Z,1516417988.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:08.732Z,1516417988.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:09.126Z,1516417989.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:09.512Z,1516417989.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:09.924Z,1516417989.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:10.325Z,1516417990.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:10.725Z,1516417990.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:11.124Z,1516417991.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:11.526Z,1516417991.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:11.925Z,1516417991.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:12.335Z,1516417992.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:12.735Z,1516417992.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:13.111Z,1516417993.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:13.521Z,1516417993.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:13.936Z,1516417993.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:14.312Z,1516417994.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:14.711Z,1516417994.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:15.125Z,1516417995.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:15.521Z,1516417995.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:15.923Z,1516417995.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:16.325Z,1516417996.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:16.729Z,1516417996.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:17.124Z,1516417997.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:17.524Z,1516417997.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:17.924Z,1516417997.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:18.326Z,1516417998.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:18.733Z,1516417998.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:19.108Z,1516417999.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:19.510Z,1516417999.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:19.967Z,1516417999.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:20.311Z,1516418000.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:20.731Z,1516418000.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:21.130Z,1516418001.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:21.535Z,1516418001.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:21.930Z,1516418001.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:22.329Z,1516418002.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:22.750Z,1516418002.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:23.123Z,1516418003.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:23.535Z,1516418003.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:23.926Z,1516418003.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:24.330Z,1516418004.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:24.727Z,1516418004.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:25.131Z,1516418005.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:25.547Z,1516418005.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:25.922Z,1516418005.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:26.322Z,1516418006.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:26.722Z,1516418006.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:27.160Z,1516418007.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:27.529Z,1516418007.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:27.930Z,1516418007.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:28.330Z,1516418008.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:28.730Z,1516418008.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:29.129Z,1516418009.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:29.531Z,1516418009.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:29.930Z,1516418009.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:30.331Z,1516418010.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:30.732Z,1516418010.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:31.131Z,1516418011.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:31.529Z,1516418011.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:31.931Z,1516418011.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:32.322Z,1516418012.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:32.720Z,1516418012.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:33.122Z,1516418013.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:33.528Z,1516418013.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:33.925Z,1516418013.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:34.333Z,1516418014.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:34.721Z,1516418014.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:35.125Z,1516418015.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:35.529Z,1516418015.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:35.922Z,1516418015.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:36.323Z,1516418016.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:36.727Z,1516418016.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:37.131Z,1516418017.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:37.525Z,1516418017.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:37.924Z,1516418017.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:38.328Z,1516418018.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:38.733Z,1516418018.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:39.159Z,1516418019.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:39.511Z,1516418019.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:39.932Z,1516418019.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:40.333Z,1516418020.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:40.711Z,1516418020.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:41.110Z,1516418021.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:41.522Z,1516418021.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:41.911Z,1516418021.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:42.320Z,1516418022.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:42.725Z,1516418022.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:43.133Z,1516418023.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:43.526Z,1516418023.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:43.925Z,1516418023.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:44.310Z,1516418024.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:44.721Z,1516418024.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:45.112Z,1516418025.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:45.520Z,1516418025.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:45.920Z,1516418025.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:46.312Z,1516418026.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:46.720Z,1516418026.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:47.128Z,1516418027.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:47.522Z,1516418027.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:47.926Z,1516418027.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:48.325Z,1516418028.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:48.730Z,1516418028.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:49.126Z,1516418029.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:49.528Z,1516418029.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:49.920Z,1516418029.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:50.326Z,1516418030.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:50.720Z,1516418030.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:51.120Z,1516418031.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:51.520Z,1516418031.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:51.928Z,1516418031.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:52.308Z,1516418032.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:52.711Z,1516418032.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:53.132Z,1516418033.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:53.511Z,1516418033.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:53.911Z,1516418033.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:54.320Z,1516418034.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:54.711Z,1516418034.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:55.111Z,1516418035.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:55.510Z,1516418035.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:55.911Z,1516418035.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:56.324Z,1516418036.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:56.720Z,1516418036.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:57.112Z,1516418037.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:57.521Z,1516418037.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:13:57.924Z,1516418037.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:01.329Z,1516418041.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:01.454Z,1516418041.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:01.820Z,1516418041.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:02.223Z,1516418042.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:02.619Z,1516418042.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:03.021Z,1516418043.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:03.421Z,1516418043.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:03.818Z,1516418043.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:04.226Z,1516418044.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:04.627Z,1516418044.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:05.022Z,1516418045.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:05.422Z,1516418045.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:05.821Z,1516418045.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:06.218Z,1516418046.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:06.630Z,1516418046.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:07.021Z,1516418047.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:07.418Z,1516418047.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:07.822Z,1516418047.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:08.227Z,1516418048.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:08.622Z,1516418048.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:09.023Z,1516418049.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:09.421Z,1516418049.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:09.827Z,1516418049.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:10.223Z,1516418050.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:10.618Z,1516418050.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:11.011Z,1516418051.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:11.432Z,1516418051.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:11.813Z,1516418051.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:12.219Z,1516418052.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:12.624Z,1516418052.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:13.023Z,1516418053.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:13.423Z,1516418053.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:13.830Z,1516418053.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:14.227Z,1516418054.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:14.621Z,1516418054.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:15.023Z,1516418055.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:15.420Z,1516418055.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:15.820Z,1516418055.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:15.839Z,1516418055.839 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:14:15.839Z,1516418055.839 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2018-01-20T03:14:15.839Z,1516418055.839 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:14:15.853Z,1516418055.853 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:14:16.230Z,1516418056.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:16.285Z,1516418056.285 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:14:16.285Z,1516418056.285 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2018-01-20T03:14:16.624Z,1516418056.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:16.642Z,1516418056.642 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:14:16.642Z,1516418056.642 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:14:16.643Z,1516418056.643 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:14:17.016Z,1516418057.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:17.415Z,1516418057.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:17.811Z,1516418057.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:18.220Z,1516418058.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:18.624Z,1516418058.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:19.012Z,1516418059.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:19.416Z,1516418059.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:19.818Z,1516418059.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:20.212Z,1516418060.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:20.615Z,1516418060.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:21.022Z,1516418061.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:21.419Z,1516418061.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:21.819Z,1516418061.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:22.223Z,1516418062.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:22.622Z,1516418062.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:23.020Z,1516418063.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:23.424Z,1516418063.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:23.820Z,1516418063.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:24.222Z,1516418064.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:24.620Z,1516418064.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:25.023Z,1516418065.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:25.425Z,1516418065.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:25.822Z,1516418065.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:26.228Z,1516418066.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:26.625Z,1516418066.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:27.022Z,1516418067.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:27.422Z,1516418067.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:27.822Z,1516418067.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:28.223Z,1516418068.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:28.622Z,1516418068.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:29.020Z,1516418069.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:29.422Z,1516418069.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:29.826Z,1516418069.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:30.217Z,1516418070.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:30.618Z,1516418070.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:31.019Z,1516418071.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:31.429Z,1516418071.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:31.825Z,1516418071.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:32.215Z,1516418072.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:32.617Z,1516418072.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:32.624Z,1516418072.624 [PNI_TCM](ERROR): CRC does not match. Expected:0x42894 got:0x49414
2018-01-20T03:14:33.022Z,1516418073.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:33.428Z,1516418073.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:33.828Z,1516418073.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:34.251Z,1516418074.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:34.632Z,1516418074.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:35.030Z,1516418075.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:35.436Z,1516418075.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:35.818Z,1516418075.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:36.227Z,1516418076.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:36.626Z,1516418076.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:37.028Z,1516418077.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:37.429Z,1516418077.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:37.843Z,1516418077.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:38.228Z,1516418078.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:38.627Z,1516418078.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:39.031Z,1516418079.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:39.038Z,1516418079.038 [PNI_TCM](ERROR): CRC does not match. Expected:0x18522 got:0x28445
2018-01-20T03:14:39.424Z,1516418079.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:39.824Z,1516418079.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:40.221Z,1516418080.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:40.629Z,1516418080.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:40.636Z,1516418080.636 [PNI_TCM](ERROR): CRC does not match. Expected:0x43239 got:0x47439
2018-01-20T03:14:41.022Z,1516418081.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:41.422Z,1516418081.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:41.811Z,1516418081.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:42.222Z,1516418082.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:42.623Z,1516418082.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:43.017Z,1516418083.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:43.415Z,1516418083.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:43.819Z,1516418083.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:44.220Z,1516418084.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:44.621Z,1516418084.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:45.020Z,1516418085.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:45.421Z,1516418085.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:45.829Z,1516418085.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:46.224Z,1516418086.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:46.620Z,1516418086.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:47.021Z,1516418087.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:47.428Z,1516418087.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:47.828Z,1516418087.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:48.224Z,1516418088.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:48.628Z,1516418088.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:49.012Z,1516418089.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:49.408Z,1516418089.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:49.828Z,1516418089.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:50.211Z,1516418090.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:50.627Z,1516418090.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:51.015Z,1516418091.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:51.419Z,1516418091.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:51.808Z,1516418091.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:52.215Z,1516418092.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:52.615Z,1516418092.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:53.019Z,1516418093.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:53.433Z,1516418093.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:53.823Z,1516418093.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:54.222Z,1516418094.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:54.619Z,1516418094.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:55.064Z,1516418095.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:55.409Z,1516418095.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:55.816Z,1516418095.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:56.220Z,1516418096.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:56.619Z,1516418096.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:57.014Z,1516418097.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:57.415Z,1516418097.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:57.813Z,1516418097.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:14:58.221Z,1516418098.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:01.500Z,1516418101.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:01.621Z,1516418101.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:01.972Z,1516418101.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:02.380Z,1516418102.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:02.768Z,1516418102.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:03.170Z,1516418103.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:03.570Z,1516418103.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:03.960Z,1516418103.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:04.379Z,1516418104.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:04.763Z,1516418104.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:05.163Z,1516418105.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:05.570Z,1516418105.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:05.963Z,1516418105.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:06.363Z,1516418106.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:06.770Z,1516418106.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:07.179Z,1516418107.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:07.579Z,1516418107.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:07.986Z,1516418107.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:08.368Z,1516418108.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:08.765Z,1516418108.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:09.184Z,1516418109.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:09.563Z,1516418109.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:09.963Z,1516418109.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:10.367Z,1516418110.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:10.771Z,1516418110.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:11.164Z,1516418111.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:11.567Z,1516418111.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:11.974Z,1516418111.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:12.364Z,1516418112.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:12.775Z,1516418112.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:13.170Z,1516418113.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:13.570Z,1516418113.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:13.976Z,1516418113.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:14.371Z,1516418114.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:14.771Z,1516418114.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:15.178Z,1516418115.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:15.571Z,1516418115.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:15.972Z,1516418115.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:16.370Z,1516418116.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:16.778Z,1516418116.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:17.164Z,1516418117.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:17.586Z,1516418117.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:17.963Z,1516418117.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:18.363Z,1516418118.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:18.787Z,1516418118.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:19.163Z,1516418119.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:19.578Z,1516418119.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:19.984Z,1516418119.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:20.363Z,1516418120.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:20.763Z,1516418120.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:21.178Z,1516418121.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:21.563Z,1516418121.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:21.960Z,1516418121.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:22.371Z,1516418122.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:22.763Z,1516418122.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:23.164Z,1516418123.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:23.571Z,1516418123.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:23.963Z,1516418123.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:24.364Z,1516418124.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:24.767Z,1516418124.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:25.167Z,1516418125.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:25.574Z,1516418125.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:25.971Z,1516418125.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:26.370Z,1516418126.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:26.770Z,1516418126.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:27.176Z,1516418127.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:27.567Z,1516418127.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:27.964Z,1516418127.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:28.367Z,1516418128.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:28.770Z,1516418128.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:29.164Z,1516418129.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:29.575Z,1516418129.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:29.974Z,1516418129.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:30.367Z,1516418130.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:30.772Z,1516418130.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:31.170Z,1516418131.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:31.571Z,1516418131.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:31.972Z,1516418131.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:32.371Z,1516418132.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:32.771Z,1516418132.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:33.175Z,1516418133.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:33.571Z,1516418133.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:33.971Z,1516418133.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:34.370Z,1516418134.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:34.778Z,1516418134.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:35.171Z,1516418135.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:35.570Z,1516418135.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:35.978Z,1516418135.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:36.373Z,1516418136.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:36.770Z,1516418136.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:37.179Z,1516418137.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:37.574Z,1516418137.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:37.971Z,1516418137.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:38.376Z,1516418138.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:38.769Z,1516418138.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:39.180Z,1516418139.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:39.563Z,1516418139.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:39.963Z,1516418139.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:40.362Z,1516418140.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:40.763Z,1516418140.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:41.164Z,1516418141.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:41.566Z,1516418141.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:41.974Z,1516418141.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:42.364Z,1516418142.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:42.774Z,1516418142.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:43.174Z,1516418143.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:43.572Z,1516418143.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:43.971Z,1516418143.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:44.375Z,1516418144.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:44.775Z,1516418144.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:45.170Z,1516418145.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:45.575Z,1516418145.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:45.975Z,1516418145.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:46.372Z,1516418146.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:46.776Z,1516418146.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:47.170Z,1516418147.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:47.584Z,1516418147.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:47.980Z,1516418147.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:48.364Z,1516418148.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:48.771Z,1516418148.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:49.170Z,1516418149.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:49.570Z,1516418149.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:49.967Z,1516418149.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:50.370Z,1516418150.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:50.766Z,1516418150.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:51.170Z,1516418151.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:51.570Z,1516418151.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:51.964Z,1516418151.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:52.367Z,1516418152.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:52.770Z,1516418152.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:53.164Z,1516418153.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:53.562Z,1516418153.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:53.971Z,1516418153.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:54.364Z,1516418154.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:54.774Z,1516418154.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:55.170Z,1516418155.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:55.575Z,1516418155.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:55.974Z,1516418155.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:56.372Z,1516418156.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:56.771Z,1516418156.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:57.173Z,1516418157.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:57.572Z,1516418157.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:57.592Z,1516418157.592 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T03:15:57.593Z,1516418157.593 [Default:CheckIn:C.Wait] Stopped
2018-01-20T03:15:57.593Z,1516418157.593 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T03:15:57.593Z,1516418157.593 [Default:CheckIn:D] Running Loop=1
2018-01-20T03:15:57.973Z,1516418157.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:57.994Z,1516418157.994 [Default:CheckIn:D] Stopped
2018-01-20T03:15:57.994Z,1516418157.994 [Default:CheckIn:E] Running Loop=1
2018-01-20T03:15:58.376Z,1516418158.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:15:58.396Z,1516418158.396 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.356144 min 
2018-01-20T03:15:58.396Z,1516418158.396 [Default:CheckIn:E] Stopped
2018-01-20T03:15:58.396Z,1516418158.396 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T03:15:58.396Z,1516418158.396 [Default:CheckIn] Stopped
2018-01-20T03:15:58.396Z,1516418158.396 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T03:15:58.397Z,1516418158.397 [Default:CheckIn](INFO): Running loop #8
2018-01-20T03:15:58.397Z,1516418158.397 [Default:CheckIn] Running Loop=8
2018-01-20T03:15:58.397Z,1516418158.397 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T03:15:58.397Z,1516418158.397 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T03:16:01.651Z,1516418161.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:01.766Z,1516418161.766 [NAL9602](INFO): Powering up
2018-01-20T03:16:01.784Z,1516418161.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:02.133Z,1516418162.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:02.531Z,1516418162.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:02.924Z,1516418162.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:03.331Z,1516418163.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:03.726Z,1516418163.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:04.127Z,1516418164.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:04.526Z,1516418164.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:04.926Z,1516418164.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:05.316Z,1516418165.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:05.718Z,1516418165.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:06.119Z,1516418166.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:06.519Z,1516418166.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:06.930Z,1516418166.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:07.320Z,1516418167.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:07.735Z,1516418167.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:08.131Z,1516418168.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:08.534Z,1516418168.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:08.920Z,1516418168.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:09.330Z,1516418169.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:09.719Z,1516418169.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:10.119Z,1516418170.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:10.518Z,1516418170.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:10.919Z,1516418170.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:11.316Z,1516418171.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:11.734Z,1516418171.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:12.135Z,1516418172.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:12.546Z,1516418172.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:12.906Z,1516418172.906 [NAL9602](INFO): NAL9602 initialized
2018-01-20T03:16:12.923Z,1516418172.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:13.323Z,1516418173.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:13.746Z,1516418173.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:14.142Z,1516418174.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:14.545Z,1516418174.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:14.920Z,1516418174.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:15.318Z,1516418175.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:15.724Z,1516418175.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:16.127Z,1516418176.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:16.522Z,1516418176.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:16.927Z,1516418176.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:17.320Z,1516418177.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:17.718Z,1516418177.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:18.123Z,1516418178.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:18.519Z,1516418178.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:18.927Z,1516418178.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:19.323Z,1516418179.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:19.719Z,1516418179.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:20.118Z,1516418180.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:20.526Z,1516418180.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:20.920Z,1516418180.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:21.331Z,1516418181.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:21.728Z,1516418181.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:22.124Z,1516418182.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:22.521Z,1516418182.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:22.929Z,1516418182.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:23.326Z,1516418183.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:23.734Z,1516418183.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:24.131Z,1516418184.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:24.526Z,1516418184.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:24.926Z,1516418184.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:25.327Z,1516418185.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:25.726Z,1516418185.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:26.126Z,1516418186.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:26.535Z,1516418186.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:26.919Z,1516418186.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:27.318Z,1516418187.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:27.726Z,1516418187.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:28.119Z,1516418188.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:28.523Z,1516418188.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:28.923Z,1516418188.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:29.319Z,1516418189.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:29.718Z,1516418189.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:30.123Z,1516418190.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:30.523Z,1516418190.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:30.923Z,1516418190.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:31.327Z,1516418191.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:31.730Z,1516418191.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:32.135Z,1516418192.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:32.529Z,1516418192.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:32.929Z,1516418192.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:33.330Z,1516418193.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:33.735Z,1516418193.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:34.127Z,1516418194.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:34.529Z,1516418194.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:34.934Z,1516418194.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:35.319Z,1516418195.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:35.735Z,1516418195.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:36.119Z,1516418196.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:36.519Z,1516418196.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:36.919Z,1516418196.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:37.331Z,1516418197.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:37.719Z,1516418197.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:38.130Z,1516418198.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:38.535Z,1516418198.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:38.920Z,1516418198.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:39.336Z,1516418199.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:39.720Z,1516418199.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:40.127Z,1516418200.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:40.524Z,1516418200.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:40.923Z,1516418200.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:41.319Z,1516418201.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:41.722Z,1516418201.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:42.123Z,1516418202.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:42.527Z,1516418202.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:42.931Z,1516418202.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:43.326Z,1516418203.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:43.727Z,1516418203.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:44.126Z,1516418204.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:44.526Z,1516418204.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:44.902Z,1516418204.902 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-01-20T03:16:44.981Z,1516418204.981 [NAL9602](FAULT): received: 
+CSQ:0

OK62, 2, 0, 0, 0

OK
2018-01-20T03:16:44.981Z,1516418204.981 [NAL9602] Data Fault, FailCount= 2
2018-01-20T03:16:44.981Z,1516418204.981 [NAL9602](ERROR): Data Fault
2018-01-20T03:16:44.999Z,1516418204.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:45.072Z,1516418205.072 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T03:16:45.306Z,1516418205.306 [NAL9602](INFO): Powering down
2018-01-20T03:16:45.326Z,1516418205.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:45.719Z,1516418205.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:46.119Z,1516418206.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:46.160Z,1516418206.160 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T03:16:46.160Z,1516418206.160 [NAL9602] No Fault, FailCount= 2
2018-01-20T03:16:46.522Z,1516418206.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:46.920Z,1516418206.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:47.321Z,1516418207.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:47.726Z,1516418207.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:48.126Z,1516418208.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:48.526Z,1516418208.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:48.918Z,1516418208.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:49.320Z,1516418209.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:49.727Z,1516418209.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:50.123Z,1516418210.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:50.518Z,1516418210.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:50.926Z,1516418210.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:51.318Z,1516418211.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:51.726Z,1516418211.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:52.126Z,1516418212.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:52.542Z,1516418212.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:52.920Z,1516418212.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:53.323Z,1516418213.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:53.718Z,1516418213.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:54.120Z,1516418214.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:54.527Z,1516418214.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:54.930Z,1516418214.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:55.323Z,1516418215.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:55.731Z,1516418215.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:56.129Z,1516418216.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:56.527Z,1516418216.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:56.926Z,1516418216.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:57.331Z,1516418217.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:57.733Z,1516418217.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:58.134Z,1516418218.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:16:58.535Z,1516418218.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:01.811Z,1516418221.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:01.942Z,1516418221.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:02.295Z,1516418222.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:02.698Z,1516418222.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:03.090Z,1516418223.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:03.486Z,1516418223.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:03.888Z,1516418223.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:04.287Z,1516418224.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:04.687Z,1516418224.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:05.086Z,1516418225.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:05.487Z,1516418225.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:05.886Z,1516418225.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:06.280Z,1516418226.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:06.688Z,1516418226.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:07.087Z,1516418227.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:07.484Z,1516418227.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:07.888Z,1516418227.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:08.285Z,1516418228.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:08.686Z,1516418228.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:09.090Z,1516418229.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:09.490Z,1516418229.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:09.886Z,1516418229.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:10.294Z,1516418230.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:10.690Z,1516418230.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:11.082Z,1516418231.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:11.487Z,1516418231.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:11.883Z,1516418231.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:12.278Z,1516418232.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:12.683Z,1516418232.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:13.112Z,1516418233.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:13.483Z,1516418233.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:13.891Z,1516418233.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:14.289Z,1516418234.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:14.690Z,1516418234.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:15.089Z,1516418235.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:15.470Z,1516418235.470 [NAL9602](INFO): Powering up NAL9602
2018-01-20T03:17:15.502Z,1516418235.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:15.891Z,1516418235.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:16.295Z,1516418236.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:16.695Z,1516418236.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:16.730Z,1516418236.730 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:17:16.730Z,1516418236.730 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2018-01-20T03:17:16.730Z,1516418236.730 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:17:16.771Z,1516418236.771 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:17:17.082Z,1516418237.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:17.164Z,1516418237.164 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:17:17.164Z,1516418237.164 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2018-01-20T03:17:17.483Z,1516418237.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:17.521Z,1516418237.521 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:17:17.522Z,1516418237.522 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:17:17.522Z,1516418237.522 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:17:17.883Z,1516418237.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:18.280Z,1516418238.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:18.688Z,1516418238.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:19.091Z,1516418239.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:19.482Z,1516418239.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:19.887Z,1516418239.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:20.283Z,1516418240.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:20.678Z,1516418240.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:21.083Z,1516418241.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:21.499Z,1516418241.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:21.883Z,1516418241.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:22.286Z,1516418242.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:22.694Z,1516418242.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:23.082Z,1516418243.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:23.487Z,1516418243.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:23.883Z,1516418243.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:24.282Z,1516418244.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:24.687Z,1516418244.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:25.083Z,1516418245.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:25.479Z,1516418245.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:25.887Z,1516418245.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:26.302Z,1516418246.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:26.666Z,1516418246.666 [NAL9602](INFO): NAL9602 initialized
2018-01-20T03:17:26.684Z,1516418246.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:27.080Z,1516418247.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:27.503Z,1516418247.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:27.904Z,1516418247.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:28.295Z,1516418248.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:28.689Z,1516418248.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:29.094Z,1516418249.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:29.498Z,1516418249.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:29.898Z,1516418249.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:30.302Z,1516418250.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:30.697Z,1516418250.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:31.092Z,1516418251.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:31.491Z,1516418251.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:31.893Z,1516418251.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:32.293Z,1516418252.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:32.692Z,1516418252.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:33.091Z,1516418253.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:33.490Z,1516418253.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:33.893Z,1516418253.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:34.304Z,1516418254.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:34.708Z,1516418254.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:35.108Z,1516418255.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:35.495Z,1516418255.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:35.891Z,1516418255.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:36.295Z,1516418256.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:36.691Z,1516418256.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:37.091Z,1516418257.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:37.488Z,1516418257.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:37.884Z,1516418257.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:38.294Z,1516418258.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:38.694Z,1516418258.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:39.083Z,1516418259.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:39.502Z,1516418259.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:39.898Z,1516418259.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:40.294Z,1516418260.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:40.702Z,1516418260.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:41.120Z,1516418261.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:41.487Z,1516418261.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:41.883Z,1516418261.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:42.283Z,1516418262.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:42.679Z,1516418262.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:43.083Z,1516418263.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:43.491Z,1516418263.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:43.883Z,1516418263.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:44.291Z,1516418264.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:44.702Z,1516418264.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:45.094Z,1516418265.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:45.502Z,1516418265.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:45.906Z,1516418265.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:46.284Z,1516418266.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:46.688Z,1516418266.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:47.092Z,1516418267.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:47.488Z,1516418267.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:47.889Z,1516418267.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:48.295Z,1516418268.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:48.683Z,1516418268.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:49.083Z,1516418269.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:49.483Z,1516418269.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:49.890Z,1516418269.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:50.302Z,1516418270.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:50.702Z,1516418270.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:51.098Z,1516418271.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:51.491Z,1516418271.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:51.894Z,1516418271.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:52.284Z,1516418272.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:52.688Z,1516418272.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:53.087Z,1516418273.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:53.488Z,1516418273.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:53.889Z,1516418273.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:54.295Z,1516418274.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:54.683Z,1516418274.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:55.094Z,1516418275.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:55.507Z,1516418275.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:55.894Z,1516418275.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:56.294Z,1516418276.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:56.679Z,1516418276.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:57.088Z,1516418277.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:57.487Z,1516418277.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:57.891Z,1516418277.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:58.290Z,1516418278.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:17:58.690Z,1516418278.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:02.118Z,1516418282.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:02.259Z,1516418282.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:02.618Z,1516418282.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:03.022Z,1516418283.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:03.403Z,1516418283.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:03.808Z,1516418283.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:04.213Z,1516418284.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:04.599Z,1516418284.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:05.009Z,1516418285.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:05.410Z,1516418285.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:05.798Z,1516418285.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:06.215Z,1516418286.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:06.604Z,1516418286.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:07.015Z,1516418287.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:07.416Z,1516418287.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:07.815Z,1516418287.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:08.210Z,1516418288.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:08.599Z,1516418288.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:08.995Z,1516418288.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:09.393Z,1516418289.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:09.799Z,1516418289.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:10.212Z,1516418290.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:10.594Z,1516418290.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:10.999Z,1516418290.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:11.395Z,1516418291.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:11.797Z,1516418291.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:12.216Z,1516418292.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:12.615Z,1516418292.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:13.014Z,1516418293.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:13.425Z,1516418293.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:13.803Z,1516418293.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:14.203Z,1516418294.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:14.599Z,1516418294.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:15.003Z,1516418295.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:15.397Z,1516418295.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:15.799Z,1516418295.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:16.203Z,1516418296.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:16.607Z,1516418296.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:17.007Z,1516418297.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:17.418Z,1516418297.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:17.810Z,1516418297.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:18.222Z,1516418298.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:18.613Z,1516418298.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:19.007Z,1516418299.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:19.403Z,1516418299.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:19.811Z,1516418299.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:20.211Z,1516418300.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:20.605Z,1516418300.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:21.004Z,1516418301.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:21.405Z,1516418301.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:21.814Z,1516418301.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:22.208Z,1516418302.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:22.617Z,1516418302.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:23.017Z,1516418303.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:23.421Z,1516418303.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:23.817Z,1516418303.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:24.211Z,1516418304.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:24.609Z,1516418304.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:25.005Z,1516418305.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:25.402Z,1516418305.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:25.795Z,1516418305.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:26.205Z,1516418306.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:26.615Z,1516418306.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:27.007Z,1516418307.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:27.405Z,1516418307.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:27.821Z,1516418307.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:28.222Z,1516418308.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:28.616Z,1516418308.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:29.022Z,1516418309.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:29.406Z,1516418309.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:29.799Z,1516418309.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:30.201Z,1516418310.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:30.601Z,1516418310.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:31.004Z,1516418311.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:31.414Z,1516418311.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:31.809Z,1516418311.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:32.209Z,1516418312.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:32.612Z,1516418312.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:33.025Z,1516418313.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:33.412Z,1516418313.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:33.831Z,1516418313.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:34.238Z,1516418314.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:34.611Z,1516418314.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:35.008Z,1516418315.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:35.412Z,1516418315.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:35.813Z,1516418315.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:36.203Z,1516418316.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:36.602Z,1516418316.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:37.005Z,1516418317.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:37.411Z,1516418317.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:37.814Z,1516418317.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:38.218Z,1516418318.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:38.621Z,1516418318.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:39.025Z,1516418319.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:39.423Z,1516418319.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:39.804Z,1516418319.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:40.200Z,1516418320.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:40.599Z,1516418320.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:41.001Z,1516418321.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:41.008Z,1516418321.008 [PNI_TCM](ERROR): CRC does not match. Expected:0x20245 got:0x49482
2018-01-20T03:18:41.401Z,1516418321.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:41.799Z,1516418321.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:42.203Z,1516418322.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:42.609Z,1516418322.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:42.615Z,1516418322.615 [PNI_TCM](ERROR): CRC does not match. Expected:0x26845 got:0x16663
2018-01-20T03:18:43.000Z,1516418323.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:43.421Z,1516418323.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:43.820Z,1516418323.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:44.214Z,1516418324.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:44.622Z,1516418324.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:45.010Z,1516418325.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:45.400Z,1516418325.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:45.807Z,1516418325.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:45.815Z,1516418325.815 [PNI_TCM](ERROR): CRC does not match. Expected:0x18104 got:0x19417
2018-01-20T03:18:46.207Z,1516418326.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:46.604Z,1516418326.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:47.005Z,1516418327.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:47.415Z,1516418327.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:47.421Z,1516418327.421 [PNI_TCM](ERROR): CRC does not match. Expected:0x23447 got:0x1655
2018-01-20T03:18:47.797Z,1516418327.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:48.201Z,1516418328.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:48.617Z,1516418328.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:49.011Z,1516418329.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:49.420Z,1516418329.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:49.820Z,1516418329.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:50.196Z,1516418330.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:50.599Z,1516418330.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:51.005Z,1516418331.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:51.399Z,1516418331.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:51.801Z,1516418331.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:52.195Z,1516418332.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:52.605Z,1516418332.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:53.009Z,1516418333.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:53.399Z,1516418333.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:53.810Z,1516418333.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:54.220Z,1516418334.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:54.615Z,1516418334.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:55.010Z,1516418335.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:55.404Z,1516418335.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:55.809Z,1516418335.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:56.200Z,1516418336.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:56.606Z,1516418336.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:57.008Z,1516418337.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:57.398Z,1516418337.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:57.814Z,1516418337.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:58.205Z,1516418338.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:58.602Z,1516418338.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:18:59.019Z,1516418339.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:02.286Z,1516418342.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:02.423Z,1516418342.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:02.794Z,1516418342.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:03.191Z,1516418343.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:03.580Z,1516418343.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:03.976Z,1516418343.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:04.373Z,1516418344.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:04.780Z,1516418344.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:05.177Z,1516418345.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:05.576Z,1516418345.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:05.979Z,1516418345.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:06.378Z,1516418346.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:06.785Z,1516418346.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:07.189Z,1516418347.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:07.590Z,1516418347.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:07.990Z,1516418347.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:08.368Z,1516418348.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:08.774Z,1516418348.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:09.184Z,1516418349.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:09.569Z,1516418349.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:09.986Z,1516418349.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:10.367Z,1516418350.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:10.768Z,1516418350.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:11.171Z,1516418351.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:11.567Z,1516418351.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:11.988Z,1516418351.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:12.389Z,1516418352.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:12.786Z,1516418352.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:13.186Z,1516418353.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:13.571Z,1516418353.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:13.975Z,1516418353.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:14.368Z,1516418354.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:14.771Z,1516418354.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:15.171Z,1516418355.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:15.575Z,1516418355.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:15.979Z,1516418355.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:16.371Z,1516418356.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:16.766Z,1516418356.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:17.181Z,1516418357.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:17.582Z,1516418357.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:17.982Z,1516418357.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:18.382Z,1516418358.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:18.771Z,1516418358.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:19.169Z,1516418359.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:19.582Z,1516418359.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:19.976Z,1516418359.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:20.375Z,1516418360.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:20.777Z,1516418360.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:21.177Z,1516418361.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:21.574Z,1516418361.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:21.986Z,1516418361.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:22.390Z,1516418362.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:22.785Z,1516418362.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:23.190Z,1516418363.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:23.233Z,1516418363.233 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T03:19:23.590Z,1516418363.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:23.978Z,1516418363.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:24.374Z,1516418364.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:24.774Z,1516418364.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:25.166Z,1516418365.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:25.574Z,1516418365.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:25.971Z,1516418365.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:26.375Z,1516418366.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:26.782Z,1516418366.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:27.182Z,1516418367.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:27.578Z,1516418367.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:27.986Z,1516418367.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:28.390Z,1516418368.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:28.782Z,1516418368.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:29.178Z,1516418369.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:29.579Z,1516418369.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:29.977Z,1516418369.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:30.377Z,1516418370.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:30.777Z,1516418370.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:31.175Z,1516418371.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:31.585Z,1516418371.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:31.985Z,1516418371.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:32.370Z,1516418372.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:32.791Z,1516418372.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:33.195Z,1516418373.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:33.586Z,1516418373.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:33.998Z,1516418373.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:34.371Z,1516418374.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:34.767Z,1516418374.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:35.175Z,1516418375.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:35.572Z,1516418375.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:35.980Z,1516418375.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:36.372Z,1516418376.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:36.776Z,1516418376.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:37.172Z,1516418377.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:37.580Z,1516418377.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:38.002Z,1516418378.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:38.395Z,1516418378.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:38.802Z,1516418378.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:39.194Z,1516418379.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:39.576Z,1516418379.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:39.982Z,1516418379.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:40.376Z,1516418380.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:40.769Z,1516418380.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:41.177Z,1516418381.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:41.575Z,1516418381.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:41.978Z,1516418381.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:42.377Z,1516418382.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:42.776Z,1516418382.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:43.186Z,1516418383.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:43.588Z,1516418383.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:43.994Z,1516418383.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:44.386Z,1516418384.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:44.771Z,1516418384.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:45.167Z,1516418385.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:45.566Z,1516418385.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:45.987Z,1516418385.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:46.367Z,1516418386.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:46.767Z,1516418386.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:47.171Z,1516418387.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:47.567Z,1516418387.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:47.982Z,1516418387.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:48.388Z,1516418388.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:48.794Z,1516418388.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:49.193Z,1516418389.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:49.590Z,1516418389.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:49.974Z,1516418389.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:50.370Z,1516418390.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:50.771Z,1516418390.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:51.167Z,1516418391.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:51.566Z,1516418391.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:51.975Z,1516418391.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:52.367Z,1516418392.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:52.771Z,1516418392.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:53.171Z,1516418393.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:53.578Z,1516418393.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:53.994Z,1516418393.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:54.390Z,1516418394.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:54.794Z,1516418394.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:55.171Z,1516418395.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:55.579Z,1516418395.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:55.977Z,1516418395.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:56.375Z,1516418396.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:56.771Z,1516418396.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:57.175Z,1516418397.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:57.575Z,1516418397.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:57.979Z,1516418397.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:58.367Z,1516418398.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:58.790Z,1516418398.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:19:59.190Z,1516418399.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:02.466Z,1516418402.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:02.590Z,1516418402.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:02.979Z,1516418402.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:03.379Z,1516418403.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:03.794Z,1516418403.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:04.186Z,1516418404.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:04.581Z,1516418404.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:04.998Z,1516418404.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:05.373Z,1516418405.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:05.782Z,1516418405.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:06.167Z,1516418406.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:06.574Z,1516418406.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:06.983Z,1516418406.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:07.382Z,1516418407.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:07.771Z,1516418407.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:08.171Z,1516418408.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:08.566Z,1516418408.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:08.998Z,1516418408.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:09.394Z,1516418409.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:09.786Z,1516418409.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:10.190Z,1516418410.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:10.567Z,1516418410.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:10.982Z,1516418410.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:11.371Z,1516418411.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:11.767Z,1516418411.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:12.171Z,1516418412.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:12.571Z,1516418412.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:12.971Z,1516418412.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:13.371Z,1516418413.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:13.774Z,1516418413.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:14.191Z,1516418414.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:14.590Z,1516418414.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:14.990Z,1516418414.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:15.388Z,1516418415.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:15.775Z,1516418415.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:16.171Z,1516418416.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:16.571Z,1516418416.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:16.975Z,1516418416.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:17.371Z,1516418417.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:17.779Z,1516418417.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:17.823Z,1516418417.823 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:20:17.823Z,1516418417.823 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2018-01-20T03:20:17.823Z,1516418417.823 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:20:17.835Z,1516418417.835 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:20:18.176Z,1516418418.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:18.226Z,1516418418.226 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:20:18.226Z,1516418418.226 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2018-01-20T03:20:18.583Z,1516418418.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:18.617Z,1516418418.617 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:20:18.618Z,1516418418.618 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:20:18.618Z,1516418418.618 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:20:18.980Z,1516418418.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:19.385Z,1516418419.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:19.789Z,1516418419.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:20.186Z,1516418420.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:20.590Z,1516418420.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:20.974Z,1516418420.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:21.383Z,1516418421.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:21.771Z,1516418421.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:22.171Z,1516418422.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:22.567Z,1516418422.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:22.975Z,1516418422.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:23.371Z,1516418423.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:23.772Z,1516418423.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:24.175Z,1516418424.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:24.591Z,1516418424.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:24.986Z,1516418424.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:25.390Z,1516418425.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:25.794Z,1516418425.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:26.167Z,1516418426.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:26.571Z,1516418426.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:26.971Z,1516418426.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:27.367Z,1516418427.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:27.775Z,1516418427.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:28.171Z,1516418428.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:28.567Z,1516418428.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:28.975Z,1516418428.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:29.371Z,1516418429.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:29.789Z,1516418429.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:30.191Z,1516418430.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:30.591Z,1516418430.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:30.992Z,1516418430.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:31.368Z,1516418431.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:31.771Z,1516418431.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:32.167Z,1516418432.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:32.576Z,1516418432.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:32.971Z,1516418432.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:33.375Z,1516418433.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:33.772Z,1516418433.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:34.172Z,1516418434.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:34.577Z,1516418434.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:34.983Z,1516418434.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:35.390Z,1516418435.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:35.778Z,1516418435.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:36.191Z,1516418436.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:36.575Z,1516418436.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:36.979Z,1516418436.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:37.369Z,1516418437.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:37.783Z,1516418437.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:38.176Z,1516418438.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:38.570Z,1516418438.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:38.974Z,1516418438.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:39.375Z,1516418439.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:39.770Z,1516418439.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:40.189Z,1516418440.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:40.586Z,1516418440.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:40.985Z,1516418440.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:41.390Z,1516418441.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:41.771Z,1516418441.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:42.169Z,1516418442.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:42.571Z,1516418442.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:42.975Z,1516418442.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:43.368Z,1516418443.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:43.783Z,1516418443.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:44.176Z,1516418444.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:44.576Z,1516418444.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:44.979Z,1516418444.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:45.382Z,1516418445.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:45.778Z,1516418445.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:46.194Z,1516418446.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:46.581Z,1516418446.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:46.976Z,1516418446.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:47.378Z,1516418447.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:47.776Z,1516418447.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:48.170Z,1516418448.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:48.578Z,1516418448.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:48.979Z,1516418448.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:49.370Z,1516418449.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:49.778Z,1516418449.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:50.176Z,1516418450.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:50.585Z,1516418450.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:50.988Z,1516418450.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:51.389Z,1516418451.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:51.794Z,1516418451.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:52.178Z,1516418452.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:52.567Z,1516418452.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:52.980Z,1516418452.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:53.371Z,1516418453.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:53.767Z,1516418453.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:54.166Z,1516418454.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:54.571Z,1516418454.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:54.967Z,1516418454.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:55.367Z,1516418455.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:55.787Z,1516418455.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:56.186Z,1516418456.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:56.581Z,1516418456.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:56.990Z,1516418456.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:57.367Z,1516418457.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:57.766Z,1516418457.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:58.171Z,1516418458.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:58.567Z,1516418458.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:58.602Z,1516418458.602 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T03:15:58.4Z
2018-01-20T03:20:58.602Z,1516418458.602 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T03:20:58.602Z,1516418458.602 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T03:20:58.970Z,1516418458.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:20:59.438Z,1516418459.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:02.654Z,1516418462.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:02.751Z,1516418462.751 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0160.lzma
2018-01-20T03:21:02.782Z,1516418462.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:03.173Z,1516418463.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:03.527Z,1516418463.527 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0160.lzma.bak
2018-01-20T03:21:03.527Z,1516418463.527 [DataOverHttps](INFO): SBD MOMSN=7726039
2018-01-20T03:21:03.583Z,1516418463.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:04.064Z,1516418464.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:04.360Z,1516418464.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:07.690Z,1516418467.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:07.827Z,1516418467.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:08.201Z,1516418468.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:08.598Z,1516418468.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:08.982Z,1516418468.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:09.389Z,1516418469.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:12.680Z,1516418472.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:12.785Z,1516418472.785 [DataOverHttps](INFO): Sending 402 bytes from file Logs/20180119T210901/Express0161.lzma
2018-01-20T03:21:12.831Z,1516418472.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:13.165Z,1516418473.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:13.532Z,1516418473.532 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0161.lzma.bak
2018-01-20T03:21:13.532Z,1516418473.532 [DataOverHttps](INFO): SBD MOMSN=7726041
2018-01-20T03:21:13.591Z,1516418473.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:14.068Z,1516418474.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:14.111Z,1516418474.111 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T03:21:14.111Z,1516418474.111 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T03:21:14.111Z,1516418474.111 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T03:21:14.363Z,1516418474.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:17.609Z,1516418477.609 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T03:21:17.640Z,1516418477.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:17.760Z,1516418477.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:18.145Z,1516418478.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:18.554Z,1516418478.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:18.943Z,1516418478.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:19.342Z,1516418479.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:19.751Z,1516418479.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:20.154Z,1516418480.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:20.542Z,1516418480.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:20.935Z,1516418480.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:21.335Z,1516418481.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:21.734Z,1516418481.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:22.143Z,1516418482.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:22.543Z,1516418482.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:22.937Z,1516418482.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:23.332Z,1516418483.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:23.743Z,1516418483.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:24.142Z,1516418484.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:24.543Z,1516418484.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:24.943Z,1516418484.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:25.340Z,1516418485.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:25.743Z,1516418485.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:26.143Z,1516418486.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:26.558Z,1516418486.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:26.932Z,1516418486.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:27.340Z,1516418487.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:27.739Z,1516418487.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:28.139Z,1516418488.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:28.551Z,1516418488.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:28.938Z,1516418488.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:29.336Z,1516418489.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:29.739Z,1516418489.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:30.151Z,1516418490.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:30.547Z,1516418490.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:30.940Z,1516418490.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:31.346Z,1516418491.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:31.739Z,1516418491.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:32.147Z,1516418492.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:32.544Z,1516418492.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:32.942Z,1516418492.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:33.355Z,1516418493.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:33.748Z,1516418493.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:34.150Z,1516418494.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:34.550Z,1516418494.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:34.945Z,1516418494.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:35.344Z,1516418495.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:35.745Z,1516418495.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:36.151Z,1516418496.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:36.535Z,1516418496.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:36.942Z,1516418496.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:37.342Z,1516418497.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:37.750Z,1516418497.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:38.138Z,1516418498.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:38.539Z,1516418498.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:38.935Z,1516418498.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:39.382Z,1516418499.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:39.739Z,1516418499.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:40.135Z,1516418500.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:40.539Z,1516418500.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:40.939Z,1516418500.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:41.332Z,1516418501.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:41.743Z,1516418501.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:42.139Z,1516418502.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:42.535Z,1516418502.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:42.943Z,1516418502.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:43.339Z,1516418503.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:43.742Z,1516418503.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:44.143Z,1516418504.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:44.539Z,1516418504.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:44.939Z,1516418504.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:45.337Z,1516418505.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:45.747Z,1516418505.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:46.147Z,1516418506.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:46.546Z,1516418506.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:46.947Z,1516418506.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:47.342Z,1516418507.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:47.743Z,1516418507.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:48.122Z,1516418508.122 [NAL9602](INFO): Powering down
2018-01-20T03:21:48.152Z,1516418508.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:48.548Z,1516418508.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:48.940Z,1516418508.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:49.345Z,1516418509.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:49.748Z,1516418509.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:50.147Z,1516418510.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:50.543Z,1516418510.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:50.947Z,1516418510.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:51.332Z,1516418511.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:51.751Z,1516418511.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:52.135Z,1516418512.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:52.535Z,1516418512.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:52.951Z,1516418512.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:53.347Z,1516418513.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:53.735Z,1516418513.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:54.151Z,1516418514.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:54.546Z,1516418514.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:54.932Z,1516418514.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:55.351Z,1516418515.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:55.735Z,1516418515.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:56.139Z,1516418516.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:56.543Z,1516418516.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:56.935Z,1516418516.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:57.335Z,1516418517.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:57.743Z,1516418517.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:58.143Z,1516418518.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:58.544Z,1516418518.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:58.944Z,1516418518.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:59.346Z,1516418519.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:21:59.744Z,1516418519.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:00.145Z,1516418520.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:00.545Z,1516418520.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:00.945Z,1516418520.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:01.348Z,1516418521.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:01.742Z,1516418521.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:02.146Z,1516418522.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:02.546Z,1516418522.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:02.946Z,1516418522.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:03.344Z,1516418523.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:03.745Z,1516418523.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:04.145Z,1516418524.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:04.547Z,1516418524.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:04.943Z,1516418524.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:05.345Z,1516418525.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:05.744Z,1516418525.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:06.148Z,1516418526.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:06.546Z,1516418526.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:06.944Z,1516418526.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:07.350Z,1516418527.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:07.747Z,1516418527.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:08.147Z,1516418528.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:08.542Z,1516418528.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:08.952Z,1516418528.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:09.346Z,1516418529.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:09.754Z,1516418529.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:10.146Z,1516418530.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:10.552Z,1516418530.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:10.946Z,1516418530.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:11.346Z,1516418531.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:11.750Z,1516418531.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:12.146Z,1516418532.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:12.546Z,1516418532.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:12.941Z,1516418532.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:13.351Z,1516418533.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:13.737Z,1516418533.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:14.137Z,1516418534.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:14.556Z,1516418534.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:17.823Z,1516418537.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:17.938Z,1516418537.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:18.334Z,1516418538.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:18.736Z,1516418538.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:19.127Z,1516418539.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:19.533Z,1516418539.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:19.931Z,1516418539.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:20.334Z,1516418540.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:20.733Z,1516418540.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:21.132Z,1516418541.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:21.536Z,1516418541.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:21.933Z,1516418541.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:22.336Z,1516418542.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:22.732Z,1516418542.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:23.130Z,1516418543.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:23.524Z,1516418543.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:23.924Z,1516418543.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:24.335Z,1516418544.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:24.724Z,1516418544.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:25.124Z,1516418545.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:25.540Z,1516418545.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:25.924Z,1516418545.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:26.326Z,1516418546.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:26.737Z,1516418546.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:27.124Z,1516418547.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:27.541Z,1516418547.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:27.928Z,1516418547.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:28.332Z,1516418548.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:28.732Z,1516418548.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:29.128Z,1516418549.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:29.532Z,1516418549.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:29.926Z,1516418549.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:30.336Z,1516418550.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:30.728Z,1516418550.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:31.128Z,1516418551.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:31.536Z,1516418551.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:31.933Z,1516418551.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:32.334Z,1516418552.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:32.733Z,1516418552.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:33.132Z,1516418553.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:33.532Z,1516418553.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:33.935Z,1516418553.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:34.336Z,1516418554.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:34.736Z,1516418554.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:35.130Z,1516418555.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:35.524Z,1516418555.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:35.929Z,1516418555.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:36.341Z,1516418556.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:36.724Z,1516418556.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:37.126Z,1516418557.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:37.531Z,1516418557.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:37.934Z,1516418557.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:38.330Z,1516418558.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:38.736Z,1516418558.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:39.128Z,1516418559.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:39.527Z,1516418559.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:39.936Z,1516418559.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:40.338Z,1516418560.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:40.739Z,1516418560.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:41.139Z,1516418561.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:41.540Z,1516418561.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:41.929Z,1516418561.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:42.341Z,1516418562.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:42.733Z,1516418562.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:43.136Z,1516418563.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:43.538Z,1516418563.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:43.934Z,1516418563.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:44.334Z,1516418564.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:44.746Z,1516418564.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:45.133Z,1516418565.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:45.542Z,1516418565.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:45.937Z,1516418565.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:46.324Z,1516418566.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:46.741Z,1516418566.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:47.131Z,1516418567.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:47.524Z,1516418567.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:47.924Z,1516418567.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:48.324Z,1516418568.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:48.724Z,1516418568.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:49.124Z,1516418569.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:49.536Z,1516418569.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:49.940Z,1516418569.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:50.322Z,1516418570.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:50.740Z,1516418570.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:51.124Z,1516418571.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:51.524Z,1516418571.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:51.928Z,1516418571.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:52.336Z,1516418572.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:52.736Z,1516418572.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:53.132Z,1516418573.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:53.533Z,1516418573.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:53.929Z,1516418573.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:54.334Z,1516418574.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:54.736Z,1516418574.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:55.133Z,1516418575.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:55.536Z,1516418575.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:55.932Z,1516418575.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:56.326Z,1516418576.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:56.736Z,1516418576.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:57.132Z,1516418577.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:57.532Z,1516418577.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:57.939Z,1516418577.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:58.339Z,1516418578.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:58.740Z,1516418578.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:59.130Z,1516418579.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:59.537Z,1516418579.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:22:59.932Z,1516418579.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:00.332Z,1516418580.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:00.740Z,1516418580.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:01.134Z,1516418581.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:01.534Z,1516418581.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:01.940Z,1516418581.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:02.334Z,1516418582.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:02.732Z,1516418582.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:03.136Z,1516418583.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:03.533Z,1516418583.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:03.937Z,1516418583.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:04.341Z,1516418584.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:04.737Z,1516418584.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:05.132Z,1516418585.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:05.535Z,1516418585.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:05.925Z,1516418585.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:06.336Z,1516418586.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:06.737Z,1516418586.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:07.125Z,1516418587.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:07.540Z,1516418587.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:07.934Z,1516418587.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:08.322Z,1516418588.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:08.728Z,1516418588.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:09.131Z,1516418589.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:09.528Z,1516418589.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:09.924Z,1516418589.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:10.329Z,1516418590.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:10.724Z,1516418590.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:11.128Z,1516418591.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:11.529Z,1516418591.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:11.924Z,1516418591.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:12.332Z,1516418592.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:12.733Z,1516418592.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:13.124Z,1516418593.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:13.528Z,1516418593.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:13.936Z,1516418593.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:14.324Z,1516418594.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:14.725Z,1516418594.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:18.007Z,1516418598.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:18.119Z,1516418598.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:18.476Z,1516418598.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:18.879Z,1516418598.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:18.928Z,1516418598.928 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:23:18.928Z,1516418598.928 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2018-01-20T03:23:18.928Z,1516418598.928 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:23:18.941Z,1516418598.941 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:23:19.267Z,1516418599.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:19.309Z,1516418599.309 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:23:19.309Z,1516418599.309 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2018-01-20T03:23:19.674Z,1516418599.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:19.692Z,1516418599.692 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:23:19.693Z,1516418599.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:23:19.693Z,1516418599.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:23:20.075Z,1516418600.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:20.472Z,1516418600.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:20.873Z,1516418600.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:21.280Z,1516418601.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:21.674Z,1516418601.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:22.074Z,1516418602.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:22.478Z,1516418602.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:22.864Z,1516418602.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:23.278Z,1516418603.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:23.677Z,1516418603.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:24.064Z,1516418604.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:24.482Z,1516418604.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:24.883Z,1516418604.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:25.267Z,1516418605.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:25.674Z,1516418605.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:26.075Z,1516418606.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:26.467Z,1516418606.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:26.870Z,1516418606.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:27.275Z,1516418607.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:27.667Z,1516418607.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:28.071Z,1516418608.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:28.471Z,1516418608.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:28.867Z,1516418608.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:29.266Z,1516418609.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:29.675Z,1516418609.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:30.072Z,1516418610.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:30.476Z,1516418610.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:30.880Z,1516418610.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:31.275Z,1516418611.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:31.679Z,1516418611.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:32.077Z,1516418612.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:32.483Z,1516418612.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:32.874Z,1516418612.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:33.284Z,1516418613.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:33.672Z,1516418613.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:34.072Z,1516418614.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:34.477Z,1516418614.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:34.876Z,1516418614.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:35.284Z,1516418615.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:35.687Z,1516418615.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:36.072Z,1516418616.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:36.471Z,1516418616.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:36.902Z,1516418616.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:37.267Z,1516418617.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:37.680Z,1516418617.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:38.080Z,1516418618.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:38.472Z,1516418618.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:38.884Z,1516418618.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:39.276Z,1516418619.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:39.672Z,1516418619.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:40.082Z,1516418620.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:40.472Z,1516418620.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:40.872Z,1516418620.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:41.285Z,1516418621.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:41.672Z,1516418621.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:42.072Z,1516418622.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:42.497Z,1516418622.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:42.872Z,1516418622.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:43.276Z,1516418623.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:43.685Z,1516418623.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:44.077Z,1516418624.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:44.489Z,1516418624.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:44.880Z,1516418624.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:45.280Z,1516418625.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:45.683Z,1516418625.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:46.072Z,1516418626.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:46.472Z,1516418626.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:46.871Z,1516418626.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:47.271Z,1516418627.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:47.668Z,1516418627.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:48.114Z,1516418628.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:48.475Z,1516418628.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:48.868Z,1516418628.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:49.271Z,1516418629.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:49.675Z,1516418629.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:50.073Z,1516418630.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:50.471Z,1516418630.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:50.877Z,1516418630.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:51.274Z,1516418631.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:51.678Z,1516418631.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:52.081Z,1516418632.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:52.476Z,1516418632.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:52.874Z,1516418632.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:53.274Z,1516418633.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:53.674Z,1516418633.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:54.074Z,1516418634.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:54.474Z,1516418634.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:54.874Z,1516418634.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:55.277Z,1516418635.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:55.674Z,1516418635.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:56.082Z,1516418636.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:56.482Z,1516418636.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:56.884Z,1516418636.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:57.276Z,1516418637.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:57.681Z,1516418637.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:58.082Z,1516418638.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:58.464Z,1516418638.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:58.879Z,1516418638.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:59.273Z,1516418639.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:23:59.667Z,1516418639.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:00.071Z,1516418640.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:00.471Z,1516418640.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:00.864Z,1516418640.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:01.271Z,1516418641.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:01.671Z,1516418641.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:02.067Z,1516418642.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:02.475Z,1516418642.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:02.871Z,1516418642.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:03.268Z,1516418643.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:03.675Z,1516418643.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:04.071Z,1516418644.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:04.464Z,1516418644.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:04.871Z,1516418644.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:05.275Z,1516418645.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:05.674Z,1516418645.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:06.075Z,1516418646.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:06.475Z,1516418646.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:06.878Z,1516418646.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:07.276Z,1516418647.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:07.676Z,1516418647.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:08.074Z,1516418648.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:08.482Z,1516418648.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:08.877Z,1516418648.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:09.274Z,1516418649.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:09.677Z,1516418649.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:10.087Z,1516418650.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:10.477Z,1516418650.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:10.881Z,1516418650.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:11.278Z,1516418651.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:11.667Z,1516418651.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:12.085Z,1516418652.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:12.479Z,1516418652.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:12.867Z,1516418652.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:13.265Z,1516418653.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:13.671Z,1516418653.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:14.071Z,1516418654.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:14.477Z,1516418654.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:14.879Z,1516418654.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:18.142Z,1516418658.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:18.266Z,1516418658.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:18.643Z,1516418658.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:19.040Z,1516418659.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:19.448Z,1516418659.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:19.843Z,1516418659.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:20.239Z,1516418660.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:20.638Z,1516418660.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:21.055Z,1516418661.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:21.431Z,1516418661.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:21.835Z,1516418661.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:22.235Z,1516418662.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:22.635Z,1516418662.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:23.035Z,1516418663.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:23.455Z,1516418663.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:23.835Z,1516418663.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:24.239Z,1516418664.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:24.639Z,1516418664.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:25.032Z,1516418665.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:25.439Z,1516418665.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:25.836Z,1516418665.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:26.236Z,1516418666.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:26.640Z,1516418666.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:27.042Z,1516418667.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:27.437Z,1516418667.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:27.844Z,1516418667.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:28.239Z,1516418668.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:28.632Z,1516418668.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:29.031Z,1516418669.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:29.435Z,1516418669.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:29.831Z,1516418669.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:30.231Z,1516418670.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:30.652Z,1516418670.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:31.031Z,1516418671.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:31.433Z,1516418671.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:31.840Z,1516418671.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:32.235Z,1516418672.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:32.640Z,1516418672.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:33.043Z,1516418673.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:33.443Z,1516418673.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:33.836Z,1516418673.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:34.237Z,1516418674.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:34.631Z,1516418674.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:35.031Z,1516418675.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:35.451Z,1516418675.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:35.831Z,1516418675.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:36.231Z,1516418676.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:36.639Z,1516418676.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:37.031Z,1516418677.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:37.431Z,1516418677.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:37.835Z,1516418677.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:38.235Z,1516418678.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:38.643Z,1516418678.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:39.039Z,1516418679.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:39.437Z,1516418679.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:39.834Z,1516418679.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:40.252Z,1516418680.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:40.638Z,1516418680.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:41.038Z,1516418681.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:41.454Z,1516418681.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:41.831Z,1516418681.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:42.231Z,1516418682.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:42.639Z,1516418682.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:43.031Z,1516418683.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:43.432Z,1516418683.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:43.839Z,1516418683.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:44.231Z,1516418684.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:44.639Z,1516418684.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:45.039Z,1516418685.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:45.435Z,1516418685.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:45.831Z,1516418685.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:46.247Z,1516418686.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:46.638Z,1516418686.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:47.038Z,1516418687.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:47.438Z,1516418687.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:47.838Z,1516418687.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:48.238Z,1516418688.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:48.638Z,1516418688.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:49.031Z,1516418689.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:49.432Z,1516418689.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:49.838Z,1516418689.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:50.231Z,1516418690.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:50.631Z,1516418690.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:51.035Z,1516418691.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:51.431Z,1516418691.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:51.831Z,1516418691.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:52.255Z,1516418692.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:52.631Z,1516418692.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:53.031Z,1516418693.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:53.435Z,1516418693.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:53.831Z,1516418693.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:54.238Z,1516418694.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:54.647Z,1516418694.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:55.036Z,1516418695.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:55.432Z,1516418695.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:55.840Z,1516418695.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:56.235Z,1516418696.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:56.638Z,1516418696.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:57.038Z,1516418697.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:57.438Z,1516418697.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:57.843Z,1516418697.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:58.235Z,1516418698.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:58.631Z,1516418698.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:59.032Z,1516418699.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:59.435Z,1516418699.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:24:59.831Z,1516418699.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:00.231Z,1516418700.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:00.635Z,1516418700.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:01.031Z,1516418701.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:01.432Z,1516418701.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:01.835Z,1516418701.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:02.235Z,1516418702.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:02.641Z,1516418702.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:03.043Z,1516418703.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:03.439Z,1516418703.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:03.845Z,1516418703.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:04.244Z,1516418704.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:04.640Z,1516418704.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:05.028Z,1516418705.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:05.438Z,1516418705.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:05.835Z,1516418705.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:06.231Z,1516418706.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:06.635Z,1516418706.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:07.034Z,1516418707.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:07.435Z,1516418707.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:07.843Z,1516418707.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:08.243Z,1516418708.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:08.640Z,1516418708.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:09.043Z,1516418709.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:09.439Z,1516418709.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:09.831Z,1516418709.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:10.231Z,1516418710.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:10.631Z,1516418710.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:11.031Z,1516418711.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:11.435Z,1516418711.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:11.831Z,1516418711.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:12.231Z,1516418712.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:12.630Z,1516418712.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:13.031Z,1516418713.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:13.432Z,1516418713.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:13.834Z,1516418713.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:14.239Z,1516418714.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:14.633Z,1516418714.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:15.039Z,1516418715.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:18.327Z,1516418718.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:18.447Z,1516418718.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:18.848Z,1516418718.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:19.253Z,1516418719.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:19.655Z,1516418719.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:20.057Z,1516418720.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:20.454Z,1516418720.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:20.849Z,1516418720.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:21.247Z,1516418721.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:21.655Z,1516418721.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:22.052Z,1516418722.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:22.461Z,1516418722.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:22.852Z,1516418722.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:23.252Z,1516418723.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:23.650Z,1516418723.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:24.039Z,1516418724.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:24.458Z,1516418724.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:24.851Z,1516418724.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:25.250Z,1516418725.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:25.654Z,1516418725.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:26.052Z,1516418726.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:26.440Z,1516418726.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:26.840Z,1516418726.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:27.254Z,1516418727.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:27.641Z,1516418727.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:28.055Z,1516418728.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:28.459Z,1516418728.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:28.843Z,1516418728.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:29.243Z,1516418729.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:29.655Z,1516418729.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:30.059Z,1516418730.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:30.440Z,1516418730.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:30.845Z,1516418730.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:31.249Z,1516418731.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:31.642Z,1516418731.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:32.043Z,1516418732.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:32.449Z,1516418732.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:32.842Z,1516418732.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:33.250Z,1516418733.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:33.651Z,1516418733.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:34.054Z,1516418734.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:34.450Z,1516418734.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:34.849Z,1516418734.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:35.248Z,1516418735.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:35.652Z,1516418735.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:36.050Z,1516418736.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:36.449Z,1516418736.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:36.850Z,1516418736.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:37.256Z,1516418737.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:37.652Z,1516418737.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:38.053Z,1516418738.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:38.449Z,1516418738.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:38.840Z,1516418738.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:39.257Z,1516418739.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:39.263Z,1516418739.263 [PNI_TCM](ERROR): CRC does not match. Expected:0x45096 got:0x59034
2018-01-20T03:25:39.641Z,1516418739.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:40.041Z,1516418740.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:40.443Z,1516418740.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:40.859Z,1516418740.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:41.242Z,1516418741.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:41.641Z,1516418741.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:42.043Z,1516418742.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:42.440Z,1516418742.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:42.844Z,1516418742.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:43.245Z,1516418743.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:43.640Z,1516418743.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:44.038Z,1516418744.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:44.446Z,1516418744.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:44.842Z,1516418744.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:45.250Z,1516418745.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:45.647Z,1516418745.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:46.049Z,1516418746.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:46.452Z,1516418746.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:46.851Z,1516418746.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:47.243Z,1516418747.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:47.657Z,1516418747.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:48.053Z,1516418748.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:48.444Z,1516418748.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:48.854Z,1516418748.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:49.252Z,1516418749.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:49.650Z,1516418749.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:50.053Z,1516418750.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:50.454Z,1516418750.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:50.847Z,1516418750.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:51.253Z,1516418751.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:51.655Z,1516418751.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:52.036Z,1516418752.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:52.438Z,1516418752.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:52.857Z,1516418752.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:53.239Z,1516418753.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:53.638Z,1516418753.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:54.058Z,1516418754.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:54.439Z,1516418754.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:54.846Z,1516418754.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:55.247Z,1516418755.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:55.639Z,1516418755.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:56.048Z,1516418756.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:56.447Z,1516418756.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:56.843Z,1516418756.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:57.247Z,1516418757.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:57.648Z,1516418757.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:58.043Z,1516418758.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:58.446Z,1516418758.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:58.843Z,1516418758.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:59.247Z,1516418759.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:25:59.650Z,1516418759.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:00.049Z,1516418760.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:00.450Z,1516418760.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:00.855Z,1516418760.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:01.243Z,1516418761.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:01.651Z,1516418761.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:02.052Z,1516418762.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:02.446Z,1516418762.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:02.839Z,1516418762.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:03.256Z,1516418763.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:03.639Z,1516418763.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:04.039Z,1516418764.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:04.451Z,1516418764.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:04.836Z,1516418764.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:05.254Z,1516418765.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:05.638Z,1516418765.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:06.039Z,1516418766.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:06.438Z,1516418766.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:06.842Z,1516418766.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:07.240Z,1516418767.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:07.639Z,1516418767.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:08.038Z,1516418768.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:08.450Z,1516418768.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:08.850Z,1516418768.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:09.254Z,1516418769.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:09.645Z,1516418769.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:10.051Z,1516418770.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:10.447Z,1516418770.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:10.849Z,1516418770.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:11.243Z,1516418771.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:11.651Z,1516418771.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:12.055Z,1516418772.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:12.455Z,1516418772.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:12.838Z,1516418772.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:13.239Z,1516418773.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:13.639Z,1516418773.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:14.050Z,1516418774.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:14.439Z,1516418774.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:14.475Z,1516418774.475 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T03:26:14.475Z,1516418774.475 [Default:CheckIn:C.Wait] Stopped
2018-01-20T03:26:14.475Z,1516418774.475 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T03:26:14.476Z,1516418774.476 [Default:CheckIn:D] Running Loop=1
2018-01-20T03:26:14.839Z,1516418774.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:14.878Z,1516418774.878 [Default:CheckIn:D] Stopped
2018-01-20T03:26:14.878Z,1516418774.878 [Default:CheckIn:E] Running Loop=1
2018-01-20T03:26:15.239Z,1516418775.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:15.283Z,1516418775.283 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 82.637533 min 
2018-01-20T03:26:15.284Z,1516418775.284 [Default:CheckIn:E] Stopped
2018-01-20T03:26:15.284Z,1516418775.284 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T03:26:15.284Z,1516418775.284 [Default:CheckIn] Stopped
2018-01-20T03:26:15.284Z,1516418775.284 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T03:26:15.284Z,1516418775.284 [Default:CheckIn](INFO): Running loop #9
2018-01-20T03:26:15.284Z,1516418775.284 [Default:CheckIn] Running Loop=9
2018-01-20T03:26:15.284Z,1516418775.284 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T03:26:15.284Z,1516418775.284 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T03:26:18.522Z,1516418778.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:18.626Z,1516418778.626 [NAL9602](INFO): Powering up
2018-01-20T03:26:18.645Z,1516418778.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:19.030Z,1516418779.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:19.425Z,1516418779.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:19.828Z,1516418779.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:19.849Z,1516418779.849 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:26:19.849Z,1516418779.849 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2018-01-20T03:26:19.849Z,1516418779.849 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:26:19.886Z,1516418779.886 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:26:20.228Z,1516418780.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:20.283Z,1516418780.283 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:26:20.283Z,1516418780.283 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2018-01-20T03:26:20.623Z,1516418780.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:20.642Z,1516418780.642 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:26:20.643Z,1516418780.643 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:26:20.643Z,1516418780.643 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:26:21.023Z,1516418781.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:21.427Z,1516418781.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:21.826Z,1516418781.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:22.226Z,1516418782.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:22.626Z,1516418782.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:23.012Z,1516418783.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:23.422Z,1516418783.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:23.826Z,1516418783.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:24.223Z,1516418784.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:24.623Z,1516418784.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:25.026Z,1516418785.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:25.423Z,1516418785.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:25.827Z,1516418785.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:26.236Z,1516418786.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:26.615Z,1516418786.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:27.019Z,1516418787.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:27.419Z,1516418787.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:27.816Z,1516418787.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:28.215Z,1516418788.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:28.622Z,1516418788.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:29.012Z,1516418789.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:29.426Z,1516418789.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:29.798Z,1516418789.798 [NAL9602](INFO): NAL9602 initialized
2018-01-20T03:26:29.815Z,1516418789.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:30.219Z,1516418790.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:30.607Z,1516418790.607 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T03:26:30.607Z,1516418790.607 [NAL9602] Data Fault, FailCount= 3
2018-01-20T03:26:30.607Z,1516418790.607 [NAL9602](ERROR): Data Fault
2018-01-20T03:26:30.625Z,1516418790.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:30.680Z,1516418790.680 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T03:26:31.014Z,1516418791.014 [NAL9602](INFO): Powering down
2018-01-20T03:26:31.031Z,1516418791.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:31.422Z,1516418791.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:31.822Z,1516418791.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:31.853Z,1516418791.853 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T03:26:31.853Z,1516418791.853 [NAL9602] No Fault, FailCount= 3
2018-01-20T03:26:32.226Z,1516418792.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:32.630Z,1516418792.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:33.022Z,1516418793.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:33.426Z,1516418793.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:33.830Z,1516418793.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:34.222Z,1516418794.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:34.626Z,1516418794.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:35.024Z,1516418795.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:35.422Z,1516418795.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:35.826Z,1516418795.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:36.230Z,1516418796.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:36.630Z,1516418796.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:37.026Z,1516418797.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:37.424Z,1516418797.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:37.827Z,1516418797.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:38.235Z,1516418798.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:38.615Z,1516418798.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:39.030Z,1516418799.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:39.418Z,1516418799.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:39.818Z,1516418799.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:40.223Z,1516418800.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:40.619Z,1516418800.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:41.016Z,1516418801.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:41.419Z,1516418801.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:41.814Z,1516418801.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:42.222Z,1516418802.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:42.623Z,1516418802.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:43.023Z,1516418803.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:43.422Z,1516418803.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:43.823Z,1516418803.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:44.222Z,1516418804.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:44.623Z,1516418804.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:45.026Z,1516418805.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:45.424Z,1516418805.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:45.821Z,1516418805.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:46.227Z,1516418806.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:46.625Z,1516418806.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:47.022Z,1516418807.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:47.430Z,1516418807.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:47.831Z,1516418807.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:48.226Z,1516418808.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:48.631Z,1516418808.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:49.025Z,1516418809.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:49.412Z,1516418809.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:49.831Z,1516418809.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:50.225Z,1516418810.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:50.626Z,1516418810.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:51.027Z,1516418811.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:51.422Z,1516418811.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:51.830Z,1516418811.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:52.231Z,1516418812.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:52.619Z,1516418812.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:53.018Z,1516418813.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:53.431Z,1516418813.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:53.819Z,1516418813.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:54.219Z,1516418814.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:54.623Z,1516418814.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:55.019Z,1516418815.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:55.415Z,1516418815.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:55.824Z,1516418815.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:56.240Z,1516418816.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:56.620Z,1516418816.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:57.017Z,1516418817.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:57.423Z,1516418817.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:57.819Z,1516418817.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:58.215Z,1516418818.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:58.623Z,1516418818.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:59.014Z,1516418819.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:59.414Z,1516418819.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:26:59.819Z,1516418819.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:00.214Z,1516418820.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:00.622Z,1516418820.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:01.027Z,1516418821.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:01.410Z,1516418821.410 [NAL9602](INFO): Powering up NAL9602
2018-01-20T03:27:01.428Z,1516418821.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:01.819Z,1516418821.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:02.224Z,1516418822.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:02.623Z,1516418822.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:03.022Z,1516418823.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:03.431Z,1516418823.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:03.827Z,1516418823.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:04.225Z,1516418824.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:04.630Z,1516418824.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:05.027Z,1516418825.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:05.423Z,1516418825.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:05.822Z,1516418825.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:06.230Z,1516418826.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:06.626Z,1516418826.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:07.035Z,1516418827.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:07.426Z,1516418827.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:07.816Z,1516418827.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:08.231Z,1516418828.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:08.618Z,1516418828.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:09.016Z,1516418829.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:09.419Z,1516418829.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:09.815Z,1516418829.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:10.216Z,1516418830.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:10.627Z,1516418830.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:11.026Z,1516418831.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:11.420Z,1516418831.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:11.831Z,1516418831.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:12.234Z,1516418832.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:12.602Z,1516418832.602 [NAL9602](INFO): NAL9602 initialized
2018-01-20T03:27:12.633Z,1516418832.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:13.026Z,1516418833.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:13.437Z,1516418833.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:13.837Z,1516418833.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:14.239Z,1516418834.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:14.615Z,1516418834.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:15.023Z,1516418835.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:15.447Z,1516418835.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:18.716Z,1516418838.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:18.854Z,1516418838.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:19.219Z,1516418839.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:19.619Z,1516418839.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:20.030Z,1516418840.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:20.430Z,1516418840.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:20.826Z,1516418840.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:21.234Z,1516418841.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:21.623Z,1516418841.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:22.027Z,1516418842.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:22.425Z,1516418842.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:22.827Z,1516418842.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:23.228Z,1516418843.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:23.626Z,1516418843.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:24.028Z,1516418844.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:24.418Z,1516418844.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:24.825Z,1516418844.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:25.243Z,1516418845.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:25.642Z,1516418845.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:26.038Z,1516418846.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:26.446Z,1516418846.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:26.823Z,1516418846.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:27.219Z,1516418847.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:27.619Z,1516418847.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:28.014Z,1516418848.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:28.419Z,1516418848.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:28.822Z,1516418848.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:29.214Z,1516418849.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:29.619Z,1516418849.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:30.027Z,1516418850.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:30.430Z,1516418850.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:30.838Z,1516418850.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:31.238Z,1516418851.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:31.638Z,1516418851.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:32.024Z,1516418852.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:32.424Z,1516418852.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:32.817Z,1516418852.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:33.228Z,1516418853.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:33.628Z,1516418853.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:34.026Z,1516418854.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:34.422Z,1516418854.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:34.824Z,1516418854.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:35.230Z,1516418855.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:35.641Z,1516418855.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:36.042Z,1516418856.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:36.443Z,1516418856.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:36.838Z,1516418856.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:37.219Z,1516418857.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:37.631Z,1516418857.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:38.015Z,1516418858.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:38.439Z,1516418858.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:38.818Z,1516418858.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:39.223Z,1516418859.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:39.619Z,1516418859.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:40.018Z,1516418860.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:40.419Z,1516418860.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:40.833Z,1516418860.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:41.234Z,1516418861.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:41.638Z,1516418861.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:42.038Z,1516418862.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:42.418Z,1516418862.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:42.815Z,1516418862.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:43.222Z,1516418863.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:43.623Z,1516418863.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:44.019Z,1516418864.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:44.419Z,1516418864.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:44.814Z,1516418864.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:45.219Z,1516418865.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:45.627Z,1516418865.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:46.030Z,1516418866.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:46.438Z,1516418866.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:46.838Z,1516418866.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:47.238Z,1516418867.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:47.627Z,1516418867.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:48.027Z,1516418868.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:48.428Z,1516418868.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:48.826Z,1516418868.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:49.225Z,1516418869.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:49.630Z,1516418869.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:50.023Z,1516418870.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:50.422Z,1516418870.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:50.832Z,1516418870.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:51.238Z,1516418871.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:51.639Z,1516418871.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:52.039Z,1516418872.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:52.439Z,1516418872.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:52.823Z,1516418872.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:53.226Z,1516418873.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:53.616Z,1516418873.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:54.022Z,1516418874.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:54.423Z,1516418874.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:54.833Z,1516418874.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:55.237Z,1516418875.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:55.620Z,1516418875.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:56.016Z,1516418876.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:56.426Z,1516418876.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:56.827Z,1516418876.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:57.226Z,1516418877.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:57.640Z,1516418877.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:58.014Z,1516418878.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:58.415Z,1516418878.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:58.819Z,1516418878.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:59.219Z,1516418879.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:27:59.627Z,1516418879.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:00.031Z,1516418880.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:00.429Z,1516418880.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:00.828Z,1516418880.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:01.228Z,1516418881.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:01.633Z,1516418881.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:02.037Z,1516418882.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:02.438Z,1516418882.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:02.835Z,1516418882.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:03.227Z,1516418883.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:03.627Z,1516418883.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:04.014Z,1516418884.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:04.427Z,1516418884.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:04.826Z,1516418884.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:05.214Z,1516418885.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:05.615Z,1516418885.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:06.030Z,1516418886.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:06.431Z,1516418886.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:06.834Z,1516418886.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:07.237Z,1516418887.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:07.647Z,1516418887.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:08.038Z,1516418888.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:08.423Z,1516418888.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:08.823Z,1516418888.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:09.215Z,1516418889.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:09.619Z,1516418889.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:10.015Z,1516418890.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:10.415Z,1516418890.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:10.819Z,1516418890.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:11.223Z,1516418891.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:11.615Z,1516418891.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:12.038Z,1516418892.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:12.442Z,1516418892.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:12.838Z,1516418892.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:13.249Z,1516418893.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:13.623Z,1516418893.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:14.019Z,1516418894.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:14.423Z,1516418894.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:14.823Z,1516418894.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:15.215Z,1516418895.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:15.616Z,1516418895.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:18.903Z,1516418898.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:19.042Z,1516418899.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:19.406Z,1516418899.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:19.806Z,1516418899.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:20.182Z,1516418900.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:20.587Z,1516418900.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:20.983Z,1516418900.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:21.385Z,1516418901.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:21.786Z,1516418901.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:22.183Z,1516418902.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:22.583Z,1516418902.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:22.986Z,1516418902.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:23.391Z,1516418903.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:23.809Z,1516418903.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:24.206Z,1516418904.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:24.608Z,1516418904.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:24.994Z,1516418904.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:25.387Z,1516418905.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:25.783Z,1516418905.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:26.183Z,1516418906.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:26.587Z,1516418906.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:26.987Z,1516418906.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:27.385Z,1516418907.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:27.787Z,1516418907.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:28.183Z,1516418908.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:28.591Z,1516418908.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:29.006Z,1516418909.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:29.407Z,1516418909.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:29.810Z,1516418909.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:30.202Z,1516418910.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:30.583Z,1516418910.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:30.985Z,1516418910.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:31.389Z,1516418911.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:31.789Z,1516418911.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:32.197Z,1516418912.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:32.589Z,1516418912.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:33.016Z,1516418913.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:33.396Z,1516418913.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:33.826Z,1516418913.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:34.205Z,1516418914.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:34.622Z,1516418914.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:35.008Z,1516418915.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:35.400Z,1516418915.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:35.796Z,1516418915.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:36.214Z,1516418916.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:36.611Z,1516418916.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:36.997Z,1516418916.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:37.388Z,1516418917.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:37.789Z,1516418917.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:38.194Z,1516418918.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:38.607Z,1516418918.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:38.989Z,1516418918.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:39.401Z,1516418919.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:39.800Z,1516418919.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:40.200Z,1516418920.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:40.622Z,1516418920.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:40.998Z,1516418920.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:41.398Z,1516418921.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:41.789Z,1516418921.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:42.214Z,1516418922.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:42.589Z,1516418922.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:42.988Z,1516418922.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:43.393Z,1516418923.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:43.800Z,1516418923.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:44.186Z,1516418924.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:44.605Z,1516418924.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:45.006Z,1516418925.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:45.400Z,1516418925.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:45.798Z,1516418925.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:46.187Z,1516418926.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:46.582Z,1516418926.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:46.991Z,1516418926.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:47.391Z,1516418927.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:47.795Z,1516418927.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:48.199Z,1516418928.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:48.596Z,1516418928.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:48.987Z,1516418928.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:49.394Z,1516418929.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:49.804Z,1516418929.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:50.202Z,1516418930.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:50.611Z,1516418930.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:51.014Z,1516418931.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:51.388Z,1516418931.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:51.788Z,1516418931.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:52.192Z,1516418932.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:52.582Z,1516418932.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:52.987Z,1516418932.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:53.383Z,1516418933.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:53.796Z,1516418933.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:54.195Z,1516418934.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:54.590Z,1516418934.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:54.994Z,1516418934.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:55.398Z,1516418935.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:55.802Z,1516418935.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:56.206Z,1516418936.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:56.590Z,1516418936.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:56.983Z,1516418936.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:57.382Z,1516418937.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:57.787Z,1516418937.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:58.183Z,1516418938.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:58.591Z,1516418938.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:58.987Z,1516418938.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:59.383Z,1516418939.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:28:59.791Z,1516418939.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:00.212Z,1516418940.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:00.594Z,1516418940.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:01.006Z,1516418941.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:01.406Z,1516418941.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:01.795Z,1516418941.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:02.196Z,1516418942.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:02.598Z,1516418942.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:02.991Z,1516418942.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:03.389Z,1516418943.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:03.794Z,1516418943.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:04.192Z,1516418944.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:04.586Z,1516418944.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:04.993Z,1516418944.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:05.403Z,1516418945.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:05.801Z,1516418945.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:06.206Z,1516418946.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:06.602Z,1516418946.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:06.983Z,1516418946.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:07.387Z,1516418947.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:07.799Z,1516418947.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:08.199Z,1516418948.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:08.587Z,1516418948.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:08.983Z,1516418948.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:09.399Z,1516418949.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:09.787Z,1516418949.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:10.183Z,1516418950.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:10.611Z,1516418950.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:11.006Z,1516418951.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:11.402Z,1516418951.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:11.806Z,1516418951.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:12.187Z,1516418952.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:12.583Z,1516418952.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:12.987Z,1516418952.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:13.387Z,1516418953.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:13.783Z,1516418953.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:14.187Z,1516418954.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:14.587Z,1516418954.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:14.987Z,1516418954.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:15.398Z,1516418955.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:15.806Z,1516418955.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:19.163Z,1516418959.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:19.298Z,1516418959.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:19.691Z,1516418959.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:20.081Z,1516418960.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:20.477Z,1516418960.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:20.872Z,1516418960.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:20.893Z,1516418960.893 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:29:20.893Z,1516418960.893 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2018-01-20T03:29:20.893Z,1516418960.893 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:29:20.926Z,1516418960.926 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:29:21.273Z,1516418961.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:21.304Z,1516418961.304 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:29:21.304Z,1516418961.304 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2018-01-20T03:29:21.662Z,1516418961.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:21.701Z,1516418961.701 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:29:21.702Z,1516418961.702 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:29:21.702Z,1516418961.702 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:29:22.067Z,1516418962.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:22.467Z,1516418962.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:22.862Z,1516418962.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:23.267Z,1516418963.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:23.317Z,1516418963.317 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T03:29:23.683Z,1516418963.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:24.081Z,1516418964.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:24.490Z,1516418964.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:24.883Z,1516418964.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:25.263Z,1516418965.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:25.671Z,1516418965.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:26.067Z,1516418966.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:26.470Z,1516418966.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:26.867Z,1516418966.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:27.271Z,1516418967.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:27.670Z,1516418967.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:28.079Z,1516418968.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:28.472Z,1516418968.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:28.882Z,1516418968.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:29.282Z,1516418969.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:29.678Z,1516418969.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:30.082Z,1516418970.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:30.474Z,1516418970.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:30.875Z,1516418970.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:31.274Z,1516418971.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:31.676Z,1516418971.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:32.071Z,1516418972.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:32.476Z,1516418972.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:32.878Z,1516418972.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:33.272Z,1516418973.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:33.666Z,1516418973.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:34.080Z,1516418974.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:34.482Z,1516418974.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:34.882Z,1516418974.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:35.284Z,1516418975.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:35.678Z,1516418975.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:36.078Z,1516418976.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:36.470Z,1516418976.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:36.880Z,1516418976.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:37.287Z,1516418977.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:37.667Z,1516418977.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:38.063Z,1516418978.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:38.467Z,1516418978.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:38.878Z,1516418978.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:39.282Z,1516418979.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:39.686Z,1516418979.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:40.081Z,1516418980.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:40.482Z,1516418980.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:40.867Z,1516418980.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:41.279Z,1516418981.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:41.663Z,1516418981.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:42.079Z,1516418982.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:42.467Z,1516418982.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:42.863Z,1516418982.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:43.267Z,1516418983.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:43.670Z,1516418983.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:44.075Z,1516418984.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:44.485Z,1516418984.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:44.886Z,1516418984.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:45.283Z,1516418985.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:45.688Z,1516418985.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:46.079Z,1516418986.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:46.463Z,1516418986.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:46.867Z,1516418986.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:47.271Z,1516418987.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:47.667Z,1516418987.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:48.067Z,1516418988.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:48.467Z,1516418988.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:48.867Z,1516418988.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:49.271Z,1516418989.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:49.686Z,1516418989.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:50.082Z,1516418990.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:50.495Z,1516418990.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:50.886Z,1516418990.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:51.263Z,1516418991.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:51.671Z,1516418991.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:52.083Z,1516418992.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:52.467Z,1516418992.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:52.883Z,1516418992.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:53.268Z,1516418993.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:53.668Z,1516418993.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:54.072Z,1516418994.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:54.468Z,1516418994.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:54.890Z,1516418994.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:55.286Z,1516418995.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:55.692Z,1516418995.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:56.097Z,1516418996.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:56.462Z,1516418996.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:56.870Z,1516418996.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:57.272Z,1516418997.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:57.665Z,1516418997.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:58.071Z,1516418998.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:58.472Z,1516418998.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:58.869Z,1516418998.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:59.279Z,1516418999.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:29:59.672Z,1516418999.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:00.079Z,1516419000.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:00.480Z,1516419000.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:00.885Z,1516419000.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:01.281Z,1516419001.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:01.675Z,1516419001.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:02.076Z,1516419002.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:02.464Z,1516419002.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:02.870Z,1516419002.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:03.282Z,1516419003.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:03.680Z,1516419003.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:04.087Z,1516419004.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:04.467Z,1516419004.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:04.862Z,1516419004.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:05.289Z,1516419005.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:05.686Z,1516419005.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:06.085Z,1516419006.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:06.488Z,1516419006.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:06.882Z,1516419006.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:07.267Z,1516419007.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:07.683Z,1516419007.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:08.064Z,1516419008.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:08.465Z,1516419008.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:08.867Z,1516419008.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:09.267Z,1516419009.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:09.682Z,1516419009.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:10.077Z,1516419010.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:10.487Z,1516419010.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:10.882Z,1516419010.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:11.292Z,1516419011.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:11.676Z,1516419011.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:12.065Z,1516419012.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:12.470Z,1516419012.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:12.863Z,1516419012.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:13.266Z,1516419013.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:13.673Z,1516419013.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:14.065Z,1516419014.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:14.461Z,1516419014.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:14.869Z,1516419014.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:15.265Z,1516419015.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:15.682Z,1516419015.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:16.088Z,1516419016.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:19.358Z,1516419019.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:19.487Z,1516419019.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:19.862Z,1516419019.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:20.267Z,1516419020.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:20.670Z,1516419020.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:21.070Z,1516419021.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:21.469Z,1516419021.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:21.858Z,1516419021.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:22.251Z,1516419022.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:22.647Z,1516419022.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:23.047Z,1516419023.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:23.451Z,1516419023.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:23.847Z,1516419023.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:24.248Z,1516419024.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:24.651Z,1516419024.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:25.055Z,1516419025.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:25.447Z,1516419025.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:25.870Z,1516419025.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:26.258Z,1516419026.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:26.657Z,1516419026.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:27.080Z,1516419027.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:27.456Z,1516419027.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:27.851Z,1516419027.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:28.259Z,1516419028.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:28.658Z,1516419028.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:29.057Z,1516419029.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:29.457Z,1516419029.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:29.855Z,1516419029.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:30.254Z,1516419030.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:30.653Z,1516419030.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:31.067Z,1516419031.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:31.462Z,1516419031.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:31.874Z,1516419031.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:32.265Z,1516419032.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:32.647Z,1516419032.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:33.051Z,1516419033.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:33.447Z,1516419033.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:33.848Z,1516419033.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:34.251Z,1516419034.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:34.655Z,1516419034.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:35.048Z,1516419035.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:35.451Z,1516419035.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:35.847Z,1516419035.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:36.262Z,1516419036.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:36.662Z,1516419036.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:37.058Z,1516419037.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:37.458Z,1516419037.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:37.851Z,1516419037.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:38.247Z,1516419038.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:38.646Z,1516419038.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:39.051Z,1516419039.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:39.459Z,1516419039.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:39.845Z,1516419039.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:40.259Z,1516419040.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:40.655Z,1516419040.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:41.053Z,1516419041.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:41.465Z,1516419041.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:41.866Z,1516419041.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:42.270Z,1516419042.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:42.669Z,1516419042.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:43.047Z,1516419043.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:43.444Z,1516419043.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:43.866Z,1516419043.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:44.251Z,1516419044.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:44.654Z,1516419044.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:45.051Z,1516419045.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:45.451Z,1516419045.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:45.845Z,1516419045.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:46.251Z,1516419046.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:46.658Z,1516419046.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:47.058Z,1516419047.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:47.471Z,1516419047.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:47.858Z,1516419047.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:48.248Z,1516419048.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:48.651Z,1516419048.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:49.055Z,1516419049.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:49.445Z,1516419049.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:49.851Z,1516419049.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:50.255Z,1516419050.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:50.662Z,1516419050.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:51.061Z,1516419051.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:51.463Z,1516419051.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:51.863Z,1516419051.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:52.272Z,1516419052.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:52.676Z,1516419052.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:53.067Z,1516419053.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:53.451Z,1516419053.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:53.852Z,1516419053.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:54.247Z,1516419054.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:54.652Z,1516419054.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:55.047Z,1516419055.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:55.448Z,1516419055.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:55.860Z,1516419055.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:56.258Z,1516419056.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:56.660Z,1516419056.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:57.065Z,1516419057.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:57.466Z,1516419057.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:57.869Z,1516419057.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:58.269Z,1516419058.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:58.647Z,1516419058.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:59.047Z,1516419059.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:59.451Z,1516419059.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:30:59.847Z,1516419059.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:00.248Z,1516419060.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:00.651Z,1516419060.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:01.047Z,1516419061.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:01.448Z,1516419061.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:01.851Z,1516419061.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:02.258Z,1516419062.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:02.674Z,1516419062.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:03.078Z,1516419063.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:03.462Z,1516419063.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:03.845Z,1516419063.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:04.255Z,1516419064.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:04.651Z,1516419064.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:05.051Z,1516419065.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:05.457Z,1516419065.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:05.860Z,1516419065.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:06.250Z,1516419066.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:06.657Z,1516419066.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:07.056Z,1516419067.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:07.469Z,1516419067.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:07.869Z,1516419067.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:08.271Z,1516419068.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:08.666Z,1516419068.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:09.051Z,1516419069.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:09.447Z,1516419069.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:09.846Z,1516419069.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:10.251Z,1516419070.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:10.647Z,1516419070.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:11.047Z,1516419071.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:11.451Z,1516419071.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:11.851Z,1516419071.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:12.260Z,1516419072.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:12.666Z,1516419072.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:13.066Z,1516419073.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:13.465Z,1516419073.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:13.869Z,1516419073.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:14.254Z,1516419074.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:14.646Z,1516419074.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:15.063Z,1516419075.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:15.472Z,1516419075.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:15.493Z,1516419075.493 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T03:26:15.3Z
2018-01-20T03:31:15.493Z,1516419075.493 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T03:31:15.493Z,1516419075.493 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T03:31:15.847Z,1516419075.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:16.319Z,1516419076.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:19.789Z,1516419079.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:19.885Z,1516419079.885 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0164.lzma
2018-01-20T03:31:19.922Z,1516419079.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:20.306Z,1516419080.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:20.675Z,1516419080.675 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0164.lzma.bak
2018-01-20T03:31:20.675Z,1516419080.675 [DataOverHttps](INFO): SBD MOMSN=7726063
2018-01-20T03:31:20.710Z,1516419080.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:21.195Z,1516419081.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:21.497Z,1516419081.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:24.783Z,1516419084.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:24.915Z,1516419084.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:25.270Z,1516419085.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:25.670Z,1516419085.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:26.052Z,1516419086.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:26.453Z,1516419086.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:29.726Z,1516419089.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:29.838Z,1516419089.838 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20180119T210901/Express0165.lzma
2018-01-20T03:31:29.874Z,1516419089.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:30.214Z,1516419090.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:30.580Z,1516419090.580 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0165.lzma.bak
2018-01-20T03:31:30.581Z,1516419090.581 [DataOverHttps](INFO): SBD MOMSN=7726065
2018-01-20T03:31:30.651Z,1516419090.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:31.111Z,1516419091.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:31.138Z,1516419091.138 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T03:31:31.138Z,1516419091.138 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T03:31:31.138Z,1516419091.138 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T03:31:31.410Z,1516419091.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:34.717Z,1516419094.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:34.847Z,1516419094.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:35.221Z,1516419095.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:35.623Z,1516419095.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:36.015Z,1516419096.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:36.406Z,1516419096.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:36.803Z,1516419096.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:37.203Z,1516419097.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:37.603Z,1516419097.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:38.015Z,1516419098.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:38.415Z,1516419098.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:38.803Z,1516419098.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:39.215Z,1516419099.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:39.627Z,1516419099.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:40.021Z,1516419100.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:40.419Z,1516419100.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:40.822Z,1516419100.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:41.203Z,1516419101.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:41.599Z,1516419101.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:42.003Z,1516419102.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:42.403Z,1516419102.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:42.803Z,1516419102.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:43.204Z,1516419103.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:43.618Z,1516419103.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:44.004Z,1516419104.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:44.414Z,1516419104.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:44.814Z,1516419104.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:45.219Z,1516419105.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:45.616Z,1516419105.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:46.024Z,1516419106.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:46.417Z,1516419106.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:46.800Z,1516419106.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:47.204Z,1516419107.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:47.619Z,1516419107.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:48.014Z,1516419108.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:48.403Z,1516419108.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:48.799Z,1516419108.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:49.209Z,1516419109.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:49.612Z,1516419109.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:50.018Z,1516419110.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:50.417Z,1516419110.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:50.822Z,1516419110.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:51.219Z,1516419111.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:51.598Z,1516419111.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:52.003Z,1516419112.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:52.399Z,1516419112.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:52.798Z,1516419112.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:53.223Z,1516419113.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:53.599Z,1516419113.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:53.997Z,1516419113.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:54.415Z,1516419114.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:54.799Z,1516419114.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:55.213Z,1516419115.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:55.621Z,1516419115.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:56.019Z,1516419116.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:56.418Z,1516419116.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:56.803Z,1516419116.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:57.215Z,1516419117.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:57.615Z,1516419117.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:58.003Z,1516419118.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:58.415Z,1516419118.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:58.801Z,1516419118.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:59.214Z,1516419119.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:59.599Z,1516419119.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:31:59.998Z,1516419119.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:00.420Z,1516419120.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:00.826Z,1516419120.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:01.217Z,1516419121.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:01.621Z,1516419121.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:01.999Z,1516419121.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:02.400Z,1516419122.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:02.806Z,1516419122.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:03.199Z,1516419123.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:03.607Z,1516419123.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:04.003Z,1516419124.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:04.399Z,1516419124.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:04.798Z,1516419124.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:05.207Z,1516419125.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:05.618Z,1516419125.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:06.018Z,1516419126.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:06.414Z,1516419126.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:06.814Z,1516419126.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:07.200Z,1516419127.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:07.603Z,1516419127.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:08.011Z,1516419128.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:08.404Z,1516419128.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:08.814Z,1516419128.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:09.206Z,1516419129.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:09.602Z,1516419129.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:10.010Z,1516419130.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:10.408Z,1516419130.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:10.818Z,1516419130.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:11.220Z,1516419131.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:11.619Z,1516419131.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:12.017Z,1516419132.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:12.411Z,1516419132.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:12.808Z,1516419132.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:13.211Z,1516419133.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:13.611Z,1516419133.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:14.008Z,1516419134.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:14.403Z,1516419134.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:14.806Z,1516419134.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:15.215Z,1516419135.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:15.590Z,1516419135.590 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T03:32:15.621Z,1516419135.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:16.003Z,1516419136.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:16.407Z,1516419136.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:16.806Z,1516419136.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:17.203Z,1516419137.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:17.604Z,1516419137.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:18.007Z,1516419138.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:18.403Z,1516419138.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:18.806Z,1516419138.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:19.200Z,1516419139.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:19.607Z,1516419139.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:19.999Z,1516419139.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:20.400Z,1516419140.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:20.803Z,1516419140.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:21.209Z,1516419141.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:21.606Z,1516419141.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:22.007Z,1516419142.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:22.048Z,1516419142.048 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:32:22.048Z,1516419142.048 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2018-01-20T03:32:22.048Z,1516419142.048 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:32:22.085Z,1516419142.085 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:32:22.409Z,1516419142.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:22.438Z,1516419142.438 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:32:22.438Z,1516419142.438 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2018-01-20T03:32:22.809Z,1516419142.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:22.827Z,1516419142.827 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:32:22.827Z,1516419142.827 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:32:22.828Z,1516419142.828 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:32:23.209Z,1516419143.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:23.609Z,1516419143.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:24.017Z,1516419144.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:24.403Z,1516419144.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:24.808Z,1516419144.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:25.210Z,1516419145.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:25.608Z,1516419145.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:26.016Z,1516419146.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:26.400Z,1516419146.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:26.798Z,1516419146.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:27.206Z,1516419147.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:27.599Z,1516419147.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:28.006Z,1516419148.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:28.399Z,1516419148.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:28.806Z,1516419148.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:29.198Z,1516419149.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:29.599Z,1516419149.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:30.006Z,1516419150.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:30.403Z,1516419150.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:30.799Z,1516419150.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:31.201Z,1516419151.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:31.599Z,1516419151.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:34.980Z,1516419154.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:35.106Z,1516419155.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:35.449Z,1516419155.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:35.850Z,1516419155.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:36.250Z,1516419156.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:36.646Z,1516419156.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:37.055Z,1516419157.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:37.439Z,1516419157.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:37.843Z,1516419157.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:38.239Z,1516419158.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:38.640Z,1516419158.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:39.043Z,1516419159.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:39.439Z,1516419159.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:39.847Z,1516419159.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:40.243Z,1516419160.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:40.639Z,1516419160.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:41.039Z,1516419161.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:41.451Z,1516419161.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:41.843Z,1516419161.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:42.237Z,1516419162.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:42.644Z,1516419162.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:43.046Z,1516419163.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:43.446Z,1516419163.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:43.850Z,1516419163.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:44.246Z,1516419164.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:44.648Z,1516419164.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:45.046Z,1516419165.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:45.439Z,1516419165.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:45.839Z,1516419165.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:46.230Z,1516419166.230 [NAL9602](INFO): Powering down
2018-01-20T03:32:46.267Z,1516419166.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:46.643Z,1516419166.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:47.040Z,1516419167.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:47.444Z,1516419167.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:47.840Z,1516419167.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:48.252Z,1516419168.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:48.644Z,1516419168.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:49.051Z,1516419169.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:49.448Z,1516419169.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:49.851Z,1516419169.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:50.251Z,1516419170.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:50.639Z,1516419170.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:51.038Z,1516419171.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:51.439Z,1516419171.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:51.839Z,1516419171.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:52.242Z,1516419172.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:52.640Z,1516419172.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:53.049Z,1516419173.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:53.447Z,1516419173.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:53.845Z,1516419173.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:54.246Z,1516419174.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:54.660Z,1516419174.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:55.039Z,1516419175.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:55.439Z,1516419175.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:55.838Z,1516419175.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:56.239Z,1516419176.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:56.638Z,1516419176.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:57.042Z,1516419177.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:57.447Z,1516419177.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:57.847Z,1516419177.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:58.246Z,1516419178.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:58.647Z,1516419178.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:59.040Z,1516419179.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:59.450Z,1516419179.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:32:59.847Z,1516419179.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:00.247Z,1516419180.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:00.646Z,1516419180.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:01.046Z,1516419181.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:01.439Z,1516419181.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:01.863Z,1516419181.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:02.242Z,1516419182.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:02.639Z,1516419182.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:03.038Z,1516419183.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:03.447Z,1516419183.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:03.839Z,1516419183.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:04.242Z,1516419184.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:04.647Z,1516419184.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:05.036Z,1516419185.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:05.442Z,1516419185.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:05.847Z,1516419185.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:06.251Z,1516419186.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:06.647Z,1516419186.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:07.051Z,1516419187.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:07.446Z,1516419187.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:07.846Z,1516419187.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:08.251Z,1516419188.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:08.639Z,1516419188.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:09.050Z,1516419189.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:09.451Z,1516419189.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:09.838Z,1516419189.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:10.246Z,1516419190.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:10.647Z,1516419190.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:11.036Z,1516419191.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:11.442Z,1516419191.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:11.847Z,1516419191.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:12.239Z,1516419192.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:12.638Z,1516419192.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:13.043Z,1516419193.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:13.440Z,1516419193.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:13.850Z,1516419193.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:14.248Z,1516419194.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:14.650Z,1516419194.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:15.043Z,1516419195.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:15.448Z,1516419195.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:15.846Z,1516419195.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:16.257Z,1516419196.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:16.655Z,1516419196.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:17.039Z,1516419197.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:17.450Z,1516419197.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:17.855Z,1516419197.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:18.239Z,1516419198.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:18.646Z,1516419198.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:19.043Z,1516419199.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:19.439Z,1516419199.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:19.838Z,1516419199.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:20.247Z,1516419200.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:20.639Z,1516419200.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:21.043Z,1516419201.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:21.444Z,1516419201.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:21.839Z,1516419201.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:22.249Z,1516419202.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:22.652Z,1516419202.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:23.046Z,1516419203.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:23.450Z,1516419203.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:23.847Z,1516419203.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:24.250Z,1516419204.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:24.643Z,1516419204.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:25.051Z,1516419205.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:25.449Z,1516419205.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:25.856Z,1516419205.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:26.251Z,1516419206.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:26.656Z,1516419206.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:27.043Z,1516419207.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:27.444Z,1516419207.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:27.839Z,1516419207.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:28.243Z,1516419208.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:28.639Z,1516419208.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:29.039Z,1516419209.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:29.438Z,1516419209.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:29.839Z,1516419209.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:30.239Z,1516419210.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:30.642Z,1516419210.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:31.040Z,1516419211.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:31.451Z,1516419211.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:31.852Z,1516419211.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:35.121Z,1516419215.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:35.255Z,1516419215.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:35.607Z,1516419215.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:36.012Z,1516419216.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:36.393Z,1516419216.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:36.799Z,1516419216.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:37.199Z,1516419217.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:37.595Z,1516419217.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:37.997Z,1516419217.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:38.399Z,1516419218.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:38.796Z,1516419218.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:39.195Z,1516419219.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:39.612Z,1516419219.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:39.997Z,1516419219.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:40.399Z,1516419220.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:40.796Z,1516419220.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:41.192Z,1516419221.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:41.602Z,1516419221.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:41.608Z,1516419221.608 [PNI_TCM](ERROR): CRC does not match. Expected:0x13513 got:0x216
2018-01-20T03:33:41.996Z,1516419221.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:42.395Z,1516419222.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:42.806Z,1516419222.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:43.193Z,1516419223.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:43.603Z,1516419223.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:43.999Z,1516419223.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:44.405Z,1516419224.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:44.800Z,1516419224.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:45.206Z,1516419225.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:45.603Z,1516419225.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:45.999Z,1516419225.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:46.410Z,1516419226.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:46.416Z,1516419226.416 [PNI_TCM](ERROR): CRC does not match. Expected:0x27881 got:0x32768
2018-01-20T03:33:46.793Z,1516419226.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:47.192Z,1516419227.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:47.604Z,1516419227.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:48.006Z,1516419228.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:48.401Z,1516419228.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:48.793Z,1516419228.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:49.192Z,1516419229.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:49.591Z,1516419229.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:49.997Z,1516419229.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:50.393Z,1516419230.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:50.798Z,1516419230.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:51.200Z,1516419231.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:51.593Z,1516419231.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:52.000Z,1516419232.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:52.395Z,1516419232.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:52.799Z,1516419232.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:52.820Z,1516419232.820 [PNI_TCM](ERROR): CRC does not match. Expected:0x62425 got:0x49483
2018-01-20T03:33:53.192Z,1516419233.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:53.593Z,1516419233.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:53.998Z,1516419233.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:54.392Z,1516419234.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:54.796Z,1516419234.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:55.193Z,1516419235.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:55.591Z,1516419235.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:55.990Z,1516419235.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:56.392Z,1516419236.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:56.793Z,1516419236.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:57.198Z,1516419237.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:57.598Z,1516419237.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:57.000Z,1516419238.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:58.392Z,1516419238.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:58.798Z,1516419238.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:59.191Z,1516419239.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:59.594Z,1516419239.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:33:59.997Z,1516419239.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:00.402Z,1516419240.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:00.802Z,1516419240.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:01.195Z,1516419241.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:01.605Z,1516419241.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:02.004Z,1516419242.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:02.398Z,1516419242.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:02.803Z,1516419242.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:03.200Z,1516419243.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:03.598Z,1516419243.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:04.004Z,1516419244.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:04.398Z,1516419244.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:04.800Z,1516419244.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:05.207Z,1516419245.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:05.602Z,1516419245.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:06.006Z,1516419246.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:06.410Z,1516419246.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:06.801Z,1516419246.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:07.200Z,1516419247.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:07.597Z,1516419247.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:08.008Z,1516419248.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:08.392Z,1516419248.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:08.798Z,1516419248.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:09.198Z,1516419249.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:09.592Z,1516419249.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:10.007Z,1516419250.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:10.395Z,1516419250.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:10.793Z,1516419250.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:11.209Z,1516419251.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:11.595Z,1516419251.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:11.991Z,1516419251.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:12.408Z,1516419252.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:12.795Z,1516419252.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:13.192Z,1516419253.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:13.595Z,1516419253.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:13.995Z,1516419253.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:14.391Z,1516419254.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:14.795Z,1516419254.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:15.195Z,1516419255.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:15.591Z,1516419255.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:15.995Z,1516419255.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:16.396Z,1516419256.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:16.795Z,1516419256.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:17.204Z,1516419257.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:17.604Z,1516419257.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:18.002Z,1516419258.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:18.400Z,1516419258.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:18.801Z,1516419258.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:19.208Z,1516419259.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:19.602Z,1516419259.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:20.002Z,1516419260.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:20.408Z,1516419260.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:20.801Z,1516419260.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:21.198Z,1516419261.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:21.609Z,1516419261.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:21.991Z,1516419261.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:22.395Z,1516419262.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:22.791Z,1516419262.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:23.191Z,1516419263.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:23.599Z,1516419263.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:23.991Z,1516419263.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:24.388Z,1516419264.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:24.795Z,1516419264.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:25.191Z,1516419265.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:25.602Z,1516419265.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:26.003Z,1516419266.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:26.401Z,1516419266.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:26.798Z,1516419266.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:27.201Z,1516419267.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:27.598Z,1516419267.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:27.998Z,1516419267.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:28.398Z,1516419268.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:28.798Z,1516419268.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:29.198Z,1516419269.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:29.598Z,1516419269.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:30.006Z,1516419270.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:30.391Z,1516419270.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:30.798Z,1516419270.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:31.191Z,1516419271.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:31.591Z,1516419271.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:31.995Z,1516419271.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:35.268Z,1516419275.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:35.381Z,1516419275.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:35.766Z,1516419275.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:36.177Z,1516419276.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:36.568Z,1516419276.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:36.974Z,1516419276.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:37.377Z,1516419277.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:37.774Z,1516419277.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:38.176Z,1516419278.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:38.563Z,1516419278.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:38.959Z,1516419278.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:39.367Z,1516419279.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:39.759Z,1516419279.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:40.167Z,1516419280.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:40.563Z,1516419280.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:40.959Z,1516419280.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:41.360Z,1516419281.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:41.762Z,1516419281.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:42.159Z,1516419282.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:42.559Z,1516419282.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:42.975Z,1516419282.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:43.367Z,1516419283.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:43.771Z,1516419283.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:44.168Z,1516419284.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:44.566Z,1516419284.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:44.966Z,1516419284.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:45.369Z,1516419285.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:45.771Z,1516419285.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:46.166Z,1516419286.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:46.569Z,1516419286.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:46.975Z,1516419286.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:47.368Z,1516419287.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:47.778Z,1516419287.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:48.159Z,1516419288.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:48.559Z,1516419288.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:48.966Z,1516419288.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:49.359Z,1516419289.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:49.759Z,1516419289.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:50.163Z,1516419290.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:50.567Z,1516419290.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:50.963Z,1516419290.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:51.371Z,1516419291.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:51.765Z,1516419291.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:52.163Z,1516419292.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:52.567Z,1516419292.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:52.966Z,1516419292.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:53.367Z,1516419293.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:53.769Z,1516419293.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:54.166Z,1516419294.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:54.562Z,1516419294.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:54.974Z,1516419294.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:55.366Z,1516419295.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:55.767Z,1516419295.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:56.165Z,1516419296.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:56.575Z,1516419296.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:56.967Z,1516419296.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:57.366Z,1516419297.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:57.775Z,1516419297.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:58.175Z,1516419298.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:58.566Z,1516419298.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:58.974Z,1516419298.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:59.360Z,1516419299.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:34:59.763Z,1516419299.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:00.159Z,1516419300.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:00.556Z,1516419300.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:00.987Z,1516419300.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:01.359Z,1516419301.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:01.759Z,1516419301.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:02.163Z,1516419302.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:02.571Z,1516419302.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:02.964Z,1516419302.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:03.368Z,1516419303.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:03.770Z,1516419303.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:04.172Z,1516419304.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:04.571Z,1516419304.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:04.967Z,1516419304.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:05.367Z,1516419305.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:05.769Z,1516419305.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:06.172Z,1516419306.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:06.571Z,1516419306.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:06.976Z,1516419306.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:07.374Z,1516419307.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:07.769Z,1516419307.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:08.169Z,1516419308.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:08.571Z,1516419308.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:08.965Z,1516419308.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:09.377Z,1516419309.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:09.776Z,1516419309.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:10.176Z,1516419310.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:10.570Z,1516419310.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:10.971Z,1516419310.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:11.360Z,1516419311.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:11.774Z,1516419311.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:12.159Z,1516419312.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:12.559Z,1516419312.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:12.963Z,1516419312.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:13.359Z,1516419313.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:13.759Z,1516419313.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:14.167Z,1516419314.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:14.563Z,1516419314.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:14.961Z,1516419314.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:15.359Z,1516419315.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:15.771Z,1516419315.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:16.171Z,1516419316.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:16.576Z,1516419316.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:16.967Z,1516419316.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:17.369Z,1516419317.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:17.767Z,1516419317.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:18.167Z,1516419318.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:18.566Z,1516419318.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:18.972Z,1516419318.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:19.370Z,1516419319.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:19.774Z,1516419319.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:20.170Z,1516419320.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:20.568Z,1516419320.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:20.970Z,1516419320.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:21.377Z,1516419321.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:21.774Z,1516419321.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:22.168Z,1516419322.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:22.571Z,1516419322.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:22.974Z,1516419322.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:22.993Z,1516419322.993 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:35:22.993Z,1516419322.993 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2018-01-20T03:35:22.993Z,1516419322.993 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:35:23.047Z,1516419323.047 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:35:23.370Z,1516419323.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:23.401Z,1516419323.401 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:35:23.401Z,1516419323.401 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2018-01-20T03:35:23.782Z,1516419323.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:23.800Z,1516419323.800 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:35:23.800Z,1516419323.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:35:23.801Z,1516419323.801 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:35:24.161Z,1516419324.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:24.574Z,1516419324.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:24.962Z,1516419324.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:25.376Z,1516419325.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:25.775Z,1516419325.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:26.179Z,1516419326.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:26.574Z,1516419326.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:26.962Z,1516419326.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:27.368Z,1516419327.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:27.766Z,1516419327.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:28.160Z,1516419328.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:28.565Z,1516419328.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:28.971Z,1516419328.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:29.367Z,1516419329.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:29.767Z,1516419329.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:30.174Z,1516419330.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:30.572Z,1516419330.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:30.971Z,1516419330.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:31.370Z,1516419331.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:31.768Z,1516419331.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:32.170Z,1516419332.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:35.436Z,1516419335.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:35.562Z,1516419335.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:35.942Z,1516419335.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:36.337Z,1516419336.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:36.734Z,1516419336.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:37.132Z,1516419337.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:37.532Z,1516419337.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:37.932Z,1516419337.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:38.332Z,1516419338.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:38.732Z,1516419338.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:39.124Z,1516419339.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:39.536Z,1516419339.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:39.939Z,1516419339.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:40.334Z,1516419340.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:40.732Z,1516419340.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:41.132Z,1516419341.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:41.516Z,1516419341.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:41.918Z,1516419341.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:42.341Z,1516419342.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:42.741Z,1516419342.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:43.141Z,1516419343.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:43.519Z,1516419343.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:43.919Z,1516419343.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:44.340Z,1516419344.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:44.740Z,1516419344.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:45.120Z,1516419345.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:45.522Z,1516419345.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:45.932Z,1516419345.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:46.316Z,1516419346.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:46.722Z,1516419346.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:47.132Z,1516419347.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:47.516Z,1516419347.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:47.922Z,1516419347.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:48.333Z,1516419348.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:48.732Z,1516419348.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:49.132Z,1516419349.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:49.523Z,1516419349.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:49.922Z,1516419349.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:50.335Z,1516419350.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:50.735Z,1516419350.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:51.119Z,1516419351.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:51.518Z,1516419351.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:51.923Z,1516419351.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:52.320Z,1516419352.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:52.736Z,1516419352.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:53.133Z,1516419353.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:53.524Z,1516419353.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:53.931Z,1516419353.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:54.334Z,1516419354.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:54.733Z,1516419354.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:55.134Z,1516419355.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:55.535Z,1516419355.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:55.932Z,1516419355.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:56.331Z,1516419356.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:56.735Z,1516419356.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:57.132Z,1516419357.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:57.536Z,1516419357.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:57.935Z,1516419357.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:58.333Z,1516419358.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:58.732Z,1516419358.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:59.144Z,1516419359.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:59.519Z,1516419359.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:35:59.923Z,1516419359.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:00.323Z,1516419360.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:00.719Z,1516419360.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:01.123Z,1516419361.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:01.533Z,1516419361.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:01.933Z,1516419361.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:02.324Z,1516419362.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:02.724Z,1516419362.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:03.133Z,1516419363.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:03.535Z,1516419363.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:03.935Z,1516419363.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:04.332Z,1516419364.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:04.736Z,1516419364.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:05.140Z,1516419365.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:05.534Z,1516419365.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:05.934Z,1516419365.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:06.333Z,1516419366.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:06.733Z,1516419366.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:07.146Z,1516419367.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:07.520Z,1516419367.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:07.942Z,1516419367.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:08.346Z,1516419368.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:08.720Z,1516419368.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:09.119Z,1516419369.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:09.523Z,1516419369.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:09.924Z,1516419369.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:10.323Z,1516419370.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:10.738Z,1516419370.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:11.133Z,1516419371.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:11.533Z,1516419371.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:11.935Z,1516419371.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:12.334Z,1516419372.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:12.732Z,1516419372.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:13.132Z,1516419373.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:13.534Z,1516419373.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:13.932Z,1516419373.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:14.336Z,1516419374.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:14.732Z,1516419374.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:15.140Z,1516419375.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:15.540Z,1516419375.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:15.933Z,1516419375.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:16.332Z,1516419376.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:16.732Z,1516419376.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:17.132Z,1516419377.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:17.532Z,1516419377.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:17.936Z,1516419377.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:18.332Z,1516419378.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:18.732Z,1516419378.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:19.132Z,1516419379.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:19.532Z,1516419379.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:19.932Z,1516419379.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:20.332Z,1516419380.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:20.732Z,1516419380.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:21.140Z,1516419381.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:21.541Z,1516419381.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:21.932Z,1516419381.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:22.332Z,1516419382.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:22.731Z,1516419382.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:23.116Z,1516419383.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:23.532Z,1516419383.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:23.934Z,1516419383.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:24.316Z,1516419384.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:24.732Z,1516419384.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:25.131Z,1516419385.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:25.532Z,1516419385.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:25.932Z,1516419385.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:26.332Z,1516419386.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:26.732Z,1516419386.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:27.136Z,1516419387.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:27.531Z,1516419387.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:27.932Z,1516419387.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:28.332Z,1516419388.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:28.732Z,1516419388.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:29.133Z,1516419389.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:29.541Z,1516419389.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:29.918Z,1516419389.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:30.319Z,1516419390.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:30.749Z,1516419390.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:31.123Z,1516419391.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:31.516Z,1516419391.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:31.565Z,1516419391.565 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T03:36:31.566Z,1516419391.566 [Default:CheckIn:C.Wait] Stopped
2018-01-20T03:36:31.566Z,1516419391.566 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T03:36:31.566Z,1516419391.566 [Default:CheckIn:D] Running Loop=1
2018-01-20T03:36:31.923Z,1516419391.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:31.966Z,1516419391.966 [Default:CheckIn:D] Stopped
2018-01-20T03:36:31.966Z,1516419391.966 [Default:CheckIn:E] Running Loop=1
2018-01-20T03:36:32.323Z,1516419392.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:32.374Z,1516419392.374 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 92.922339 min 
2018-01-20T03:36:32.374Z,1516419392.374 [Default:CheckIn:E] Stopped
2018-01-20T03:36:32.374Z,1516419392.374 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T03:36:32.374Z,1516419392.374 [Default:CheckIn] Stopped
2018-01-20T03:36:32.374Z,1516419392.374 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T03:36:32.374Z,1516419392.374 [Default:CheckIn](INFO): Running loop #10
2018-01-20T03:36:32.374Z,1516419392.374 [Default:CheckIn] Running Loop=10
2018-01-20T03:36:32.375Z,1516419392.375 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T03:36:32.375Z,1516419392.375 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T03:36:35.613Z,1516419395.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:35.706Z,1516419395.706 [NAL9602](INFO): Powering up
2018-01-20T03:36:35.727Z,1516419395.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:36.083Z,1516419396.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:36.482Z,1516419396.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:36.883Z,1516419396.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:37.283Z,1516419397.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:37.683Z,1516419397.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:38.085Z,1516419398.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:38.482Z,1516419398.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:38.885Z,1516419398.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:39.278Z,1516419399.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:39.682Z,1516419399.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:40.085Z,1516419400.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:40.485Z,1516419400.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:40.881Z,1516419400.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:41.278Z,1516419401.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:41.686Z,1516419401.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:42.078Z,1516419402.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:42.480Z,1516419402.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:42.886Z,1516419402.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:43.283Z,1516419403.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:43.678Z,1516419403.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:44.081Z,1516419404.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:44.482Z,1516419404.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:44.886Z,1516419404.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:45.287Z,1516419405.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:45.682Z,1516419405.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:46.078Z,1516419406.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:46.492Z,1516419406.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:46.862Z,1516419406.862 [NAL9602](INFO): NAL9602 initialized
2018-01-20T03:36:46.889Z,1516419406.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:47.287Z,1516419407.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:47.694Z,1516419407.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:48.094Z,1516419408.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:48.489Z,1516419408.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:48.875Z,1516419408.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:49.279Z,1516419409.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:49.676Z,1516419409.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:50.079Z,1516419410.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:50.475Z,1516419410.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:50.878Z,1516419410.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:51.275Z,1516419411.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:51.675Z,1516419411.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:52.075Z,1516419412.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:52.483Z,1516419412.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:52.883Z,1516419412.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:53.276Z,1516419413.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:53.679Z,1516419413.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:54.087Z,1516419414.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:54.481Z,1516419414.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:54.879Z,1516419414.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:55.281Z,1516419415.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:55.679Z,1516419415.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:56.076Z,1516419416.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:56.483Z,1516419416.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:56.882Z,1516419416.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:57.284Z,1516419417.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:57.685Z,1516419417.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:58.077Z,1516419418.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:58.485Z,1516419418.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:58.888Z,1516419418.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:59.290Z,1516419419.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:36:59.689Z,1516419419.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:00.087Z,1516419420.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:00.490Z,1516419420.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:00.889Z,1516419420.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:01.278Z,1516419421.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:01.688Z,1516419421.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:02.084Z,1516419422.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:02.495Z,1516419422.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:02.876Z,1516419422.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:03.271Z,1516419423.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:03.675Z,1516419423.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:04.071Z,1516419424.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:04.472Z,1516419424.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:04.896Z,1516419424.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:05.275Z,1516419425.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:05.670Z,1516419425.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:06.075Z,1516419426.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:06.471Z,1516419426.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:06.887Z,1516419426.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:07.275Z,1516419427.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:07.688Z,1516419427.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:08.086Z,1516419428.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:08.495Z,1516419428.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:08.871Z,1516419428.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:09.269Z,1516419429.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:09.679Z,1516419429.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:10.076Z,1516419430.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:10.473Z,1516419430.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:10.875Z,1516419430.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:11.271Z,1516419431.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:11.679Z,1516419431.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:12.075Z,1516419432.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:12.475Z,1516419432.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:12.870Z,1516419432.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:13.279Z,1516419433.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:13.671Z,1516419433.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:14.079Z,1516419434.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:14.475Z,1516419434.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:14.879Z,1516419434.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:15.272Z,1516419435.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:15.679Z,1516419435.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:16.080Z,1516419436.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:16.471Z,1516419436.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:16.880Z,1516419436.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:17.287Z,1516419437.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:17.679Z,1516419437.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:18.081Z,1516419438.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:18.483Z,1516419438.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:18.854Z,1516419438.854 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-01-20T03:37:18.929Z,1516419438.929 [NAL9602](FAULT): received: 
+CSQ:0

OK62, 2, 0, 0, 0

OK
2018-01-20T03:37:18.929Z,1516419438.929 [NAL9602] Data Fault, FailCount= 4
2018-01-20T03:37:18.929Z,1516419438.929 [NAL9602](ERROR): Data Fault
2018-01-20T03:37:18.947Z,1516419438.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:19.042Z,1516419439.042 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T03:37:19.270Z,1516419439.270 [NAL9602](INFO): Powering down
2018-01-20T03:37:19.300Z,1516419439.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:19.679Z,1516419439.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:20.068Z,1516419440.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:20.119Z,1516419440.119 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T03:37:20.119Z,1516419440.119 [NAL9602] No Fault, FailCount= 4
2018-01-20T03:37:20.479Z,1516419440.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:20.868Z,1516419440.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:21.270Z,1516419441.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:21.675Z,1516419441.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:22.079Z,1516419442.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:22.475Z,1516419442.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:22.879Z,1516419442.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:23.282Z,1516419443.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:23.675Z,1516419443.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:24.080Z,1516419444.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:24.477Z,1516419444.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:24.878Z,1516419444.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:25.279Z,1516419445.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:25.678Z,1516419445.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:26.080Z,1516419446.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:26.481Z,1516419446.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:26.881Z,1516419446.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:27.277Z,1516419447.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:27.681Z,1516419447.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:28.082Z,1516419448.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:28.480Z,1516419448.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:28.881Z,1516419448.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:29.278Z,1516419449.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:29.685Z,1516419449.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:30.082Z,1516419450.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:30.478Z,1516419450.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:30.878Z,1516419450.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:31.277Z,1516419451.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:31.678Z,1516419451.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:32.079Z,1516419452.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:32.482Z,1516419452.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:35.745Z,1516419455.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:35.859Z,1516419455.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:36.247Z,1516419456.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:36.655Z,1516419456.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:37.036Z,1516419457.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:37.455Z,1516419457.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:37.843Z,1516419457.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:38.239Z,1516419458.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:38.663Z,1516419458.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:39.039Z,1516419459.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:39.440Z,1516419459.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:39.847Z,1516419459.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:40.239Z,1516419460.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:40.647Z,1516419460.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:41.043Z,1516419461.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:41.439Z,1516419461.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:41.839Z,1516419461.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:42.243Z,1516419462.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:42.647Z,1516419462.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:43.040Z,1516419463.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:43.451Z,1516419463.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:43.851Z,1516419463.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:44.242Z,1516419464.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:44.647Z,1516419464.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:45.049Z,1516419465.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:45.446Z,1516419465.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:45.848Z,1516419465.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:46.246Z,1516419466.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:46.654Z,1516419466.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:47.050Z,1516419467.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:47.439Z,1516419467.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:47.839Z,1516419467.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:48.246Z,1516419468.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:48.654Z,1516419468.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:49.040Z,1516419469.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:49.430Z,1516419469.430 [NAL9602](INFO): Powering up NAL9602
2018-01-20T03:37:49.447Z,1516419469.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:49.839Z,1516419469.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:50.239Z,1516419470.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:50.647Z,1516419470.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:51.051Z,1516419471.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:51.440Z,1516419471.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:51.843Z,1516419471.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:52.239Z,1516419472.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:52.643Z,1516419472.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:53.051Z,1516419473.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:53.451Z,1516419473.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:53.844Z,1516419473.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:54.255Z,1516419474.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:54.648Z,1516419474.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:55.048Z,1516419475.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:55.456Z,1516419475.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:55.846Z,1516419475.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:56.246Z,1516419476.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:56.649Z,1516419476.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:57.047Z,1516419477.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:57.453Z,1516419477.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:57.860Z,1516419477.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:58.242Z,1516419478.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:58.639Z,1516419478.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:59.039Z,1516419479.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:59.447Z,1516419479.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:37:59.847Z,1516419479.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:00.255Z,1516419480.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:00.622Z,1516419480.622 [NAL9602](INFO): NAL9602 initialized
2018-01-20T03:38:00.639Z,1516419480.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:01.043Z,1516419481.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:01.434Z,1516419481.434 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T03:38:01.434Z,1516419481.434 [NAL9602] Data Fault, FailCount= 5
2018-01-20T03:38:01.434Z,1516419481.434 [NAL9602](ERROR): Data Fault
2018-01-20T03:38:01.452Z,1516419481.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:01.522Z,1516419481.522 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T03:38:01.522Z,1516419481.522 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-20T03:38:01.834Z,1516419481.834 [NAL9602](INFO): Powering down
2018-01-20T03:38:01.853Z,1516419481.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:01.910Z,1516419481.910 [CBIT](INFO): Critical error at 20180120T033801
2018-01-20T03:38:02.238Z,1516419482.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:02.654Z,1516419482.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:03.038Z,1516419483.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:03.438Z,1516419483.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:03.838Z,1516419483.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:04.238Z,1516419484.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:04.646Z,1516419484.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:05.042Z,1516419485.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:05.438Z,1516419485.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:05.846Z,1516419485.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:06.238Z,1516419486.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:06.638Z,1516419486.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:07.036Z,1516419487.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:07.438Z,1516419487.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:07.846Z,1516419487.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:08.240Z,1516419488.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:08.642Z,1516419488.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:09.042Z,1516419489.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:09.439Z,1516419489.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:09.854Z,1516419489.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:10.244Z,1516419490.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:10.644Z,1516419490.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:11.044Z,1516419491.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:11.448Z,1516419491.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:11.845Z,1516419491.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:12.251Z,1516419492.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:12.646Z,1516419492.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:13.036Z,1516419493.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:13.453Z,1516419493.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:13.838Z,1516419493.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:14.238Z,1516419494.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:14.661Z,1516419494.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:15.038Z,1516419495.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:15.438Z,1516419495.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:15.838Z,1516419495.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:16.238Z,1516419496.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:16.638Z,1516419496.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:17.042Z,1516419497.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:17.453Z,1516419497.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:17.838Z,1516419497.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:18.246Z,1516419498.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:18.646Z,1516419498.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:19.039Z,1516419499.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:19.442Z,1516419499.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:19.846Z,1516419499.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:20.239Z,1516419500.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:20.647Z,1516419500.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:21.051Z,1516419501.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:21.442Z,1516419501.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:21.854Z,1516419501.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:22.254Z,1516419502.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:22.650Z,1516419502.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:23.044Z,1516419503.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:23.451Z,1516419503.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:23.846Z,1516419503.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:23.865Z,1516419503.865 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:38:23.865Z,1516419503.865 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2018-01-20T03:38:23.865Z,1516419503.865 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:38:23.877Z,1516419503.877 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:38:24.261Z,1516419504.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:24.332Z,1516419504.332 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:38:24.332Z,1516419504.332 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2018-01-20T03:38:24.654Z,1516419504.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:24.672Z,1516419504.672 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:38:24.672Z,1516419504.672 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:38:24.673Z,1516419504.673 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:38:25.038Z,1516419505.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:25.438Z,1516419505.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:25.843Z,1516419505.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:26.238Z,1516419506.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:26.642Z,1516419506.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:27.043Z,1516419507.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:27.438Z,1516419507.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:27.838Z,1516419507.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:28.262Z,1516419508.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:28.638Z,1516419508.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:29.046Z,1516419509.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:29.447Z,1516419509.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:29.850Z,1516419509.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:30.246Z,1516419510.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:30.651Z,1516419510.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:31.044Z,1516419511.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:31.450Z,1516419511.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:31.853Z,1516419511.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:32.246Z,1516419512.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:32.646Z,1516419512.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:35.919Z,1516419515.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:36.034Z,1516419516.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:36.430Z,1516419516.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:36.822Z,1516419516.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:37.215Z,1516419517.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:37.619Z,1516419517.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:38.019Z,1516419518.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:38.418Z,1516419518.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:38.825Z,1516419518.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:39.225Z,1516419519.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:39.625Z,1516419519.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:40.021Z,1516419520.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:40.428Z,1516419520.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:40.818Z,1516419520.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:41.222Z,1516419521.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:41.626Z,1516419521.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:42.018Z,1516419522.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:42.418Z,1516419522.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:42.826Z,1516419522.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:43.218Z,1516419523.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:43.622Z,1516419523.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:44.021Z,1516419524.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:44.412Z,1516419524.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:44.826Z,1516419524.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:45.215Z,1516419525.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:45.612Z,1516419525.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:46.022Z,1516419526.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:46.458Z,1516419526.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:46.820Z,1516419526.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:47.226Z,1516419527.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:47.624Z,1516419527.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:48.040Z,1516419528.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:48.415Z,1516419528.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:48.834Z,1516419528.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:49.218Z,1516419529.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:49.626Z,1516419529.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:50.023Z,1516419530.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:50.415Z,1516419530.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:50.856Z,1516419530.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:51.225Z,1516419531.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:51.616Z,1516419531.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:52.016Z,1516419532.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:52.416Z,1516419532.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:52.816Z,1516419532.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:53.235Z,1516419533.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:53.623Z,1516419533.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:54.023Z,1516419534.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:54.425Z,1516419534.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:54.827Z,1516419534.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:55.217Z,1516419535.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:55.626Z,1516419535.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:56.031Z,1516419536.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:56.422Z,1516419536.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:56.823Z,1516419536.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:57.223Z,1516419537.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:57.623Z,1516419537.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:58.023Z,1516419538.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:58.416Z,1516419538.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:58.816Z,1516419538.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:59.215Z,1516419539.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:38:59.616Z,1516419539.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:00.021Z,1516419540.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:00.428Z,1516419540.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:00.815Z,1516419540.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:01.215Z,1516419541.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:01.618Z,1516419541.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:02.017Z,1516419542.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:02.425Z,1516419542.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:02.818Z,1516419542.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:03.218Z,1516419543.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:03.660Z,1516419543.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:04.030Z,1516419544.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:04.416Z,1516419544.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:04.821Z,1516419544.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:05.215Z,1516419545.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:05.621Z,1516419545.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:06.023Z,1516419546.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:06.423Z,1516419546.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:06.816Z,1516419546.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:07.216Z,1516419547.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:07.616Z,1516419547.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:08.016Z,1516419548.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:08.416Z,1516419548.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:08.829Z,1516419548.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:09.229Z,1516419549.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:09.621Z,1516419549.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:10.022Z,1516419550.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:10.423Z,1516419550.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:10.824Z,1516419550.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:11.216Z,1516419551.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:11.614Z,1516419551.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:12.018Z,1516419552.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:12.415Z,1516419552.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:12.810Z,1516419552.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:13.218Z,1516419553.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:13.618Z,1516419553.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:14.018Z,1516419554.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:14.416Z,1516419554.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:14.815Z,1516419554.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:15.208Z,1516419555.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:15.620Z,1516419555.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:16.018Z,1516419556.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:16.408Z,1516419556.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:16.815Z,1516419556.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:17.231Z,1516419557.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:17.610Z,1516419557.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:18.018Z,1516419558.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:18.422Z,1516419558.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:18.810Z,1516419558.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:19.226Z,1516419559.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:19.618Z,1516419559.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:20.026Z,1516419560.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:20.426Z,1516419560.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:20.818Z,1516419560.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:21.208Z,1516419561.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:21.626Z,1516419561.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:22.030Z,1516419562.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:22.410Z,1516419562.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:22.822Z,1516419562.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:23.226Z,1516419563.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:23.608Z,1516419563.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:23.659Z,1516419563.659 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T03:39:24.015Z,1516419564.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:24.415Z,1516419564.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:24.815Z,1516419564.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:25.219Z,1516419565.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:25.619Z,1516419565.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:26.014Z,1516419566.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:26.419Z,1516419566.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:26.815Z,1516419566.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:27.211Z,1516419567.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:27.619Z,1516419567.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:28.014Z,1516419568.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:28.410Z,1516419568.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:28.815Z,1516419568.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:29.214Z,1516419569.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:29.620Z,1516419569.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:30.016Z,1516419570.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:30.420Z,1516419570.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:30.815Z,1516419570.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:31.220Z,1516419571.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:31.624Z,1516419571.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:32.023Z,1516419572.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:32.416Z,1516419572.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:32.828Z,1516419572.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:36.089Z,1516419576.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:36.204Z,1516419576.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:36.598Z,1516419576.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:36.990Z,1516419576.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:37.391Z,1516419577.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:37.792Z,1516419577.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:38.189Z,1516419578.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:38.593Z,1516419578.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:38.993Z,1516419578.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:39.390Z,1516419579.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:39.796Z,1516419579.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:40.198Z,1516419580.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:40.592Z,1516419580.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:40.993Z,1516419580.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:41.399Z,1516419581.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:41.796Z,1516419581.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:42.196Z,1516419582.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:42.595Z,1516419582.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:42.992Z,1516419582.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:43.403Z,1516419583.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:43.798Z,1516419583.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:44.189Z,1516419584.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:44.599Z,1516419584.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:45.002Z,1516419585.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:45.384Z,1516419585.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:45.790Z,1516419585.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:46.190Z,1516419586.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:46.595Z,1516419586.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:46.999Z,1516419586.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:47.390Z,1516419587.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:47.782Z,1516419587.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:48.194Z,1516419588.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:48.605Z,1516419588.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:48.000Z,1516419589.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:49.384Z,1516419589.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:49.798Z,1516419589.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:50.186Z,1516419590.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:50.584Z,1516419590.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:50.990Z,1516419590.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:51.384Z,1516419591.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:51.783Z,1516419591.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:52.186Z,1516419592.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:52.582Z,1516419592.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:52.986Z,1516419592.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:53.394Z,1516419593.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:53.786Z,1516419593.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:54.187Z,1516419594.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:54.592Z,1516419594.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:54.995Z,1516419594.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:55.391Z,1516419595.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:55.803Z,1516419595.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:56.199Z,1516419596.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:56.593Z,1516419596.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:57.002Z,1516419597.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:57.394Z,1516419597.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:57.784Z,1516419597.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:58.190Z,1516419598.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:58.594Z,1516419598.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:58.984Z,1516419598.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:59.406Z,1516419599.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:39:59.795Z,1516419599.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:00.198Z,1516419600.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:00.590Z,1516419600.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:00.996Z,1516419600.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:01.394Z,1516419601.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:01.802Z,1516419601.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:01.833Z,1516419601.833 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T03:40:01.833Z,1516419601.833 [NAL9602] No Fault, FailCount= 5
2018-01-20T03:40:02.170Z,1516419602.170 [NAL9602](INFO): Powering up NAL9602
2018-01-20T03:40:02.188Z,1516419602.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:02.586Z,1516419602.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:02.989Z,1516419602.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:03.387Z,1516419603.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:03.790Z,1516419603.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:04.189Z,1516419604.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:04.593Z,1516419604.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:04.986Z,1516419604.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:05.395Z,1516419605.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:05.797Z,1516419605.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:06.196Z,1516419606.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:06.594Z,1516419606.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:06.991Z,1516419606.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:07.393Z,1516419607.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:07.794Z,1516419607.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:08.196Z,1516419608.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:08.595Z,1516419608.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:09.002Z,1516419609.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:09.394Z,1516419609.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:09.792Z,1516419609.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:10.202Z,1516419610.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:10.602Z,1516419610.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:10.993Z,1516419610.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:11.400Z,1516419611.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:11.784Z,1516419611.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:12.182Z,1516419612.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:12.587Z,1516419612.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:13.002Z,1516419613.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:13.374Z,1516419613.374 [NAL9602](INFO): NAL9602 initialized
2018-01-20T03:40:13.392Z,1516419613.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:13.787Z,1516419613.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:14.212Z,1516419614.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:14.218Z,1516419614.218 [PNI_TCM](ERROR): CRC does not match. Expected:0x65162 got:0x16823
2018-01-20T03:40:14.610Z,1516419614.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:15.010Z,1516419615.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:15.382Z,1516419615.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:15.787Z,1516419615.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:16.212Z,1516419616.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:16.595Z,1516419616.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:17.002Z,1516419617.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:17.387Z,1516419617.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:17.794Z,1516419617.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:17.800Z,1516419617.800 [PNI_TCM](ERROR): CRC does not match. Expected:0x13983 got:0x6336
2018-01-20T03:40:18.189Z,1516419618.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:18.591Z,1516419618.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:18.991Z,1516419618.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:19.390Z,1516419619.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:19.796Z,1516419619.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:20.198Z,1516419620.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:20.591Z,1516419620.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:21.002Z,1516419621.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:21.406Z,1516419621.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:21.803Z,1516419621.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:22.206Z,1516419622.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:22.220Z,1516419622.220 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2018-01-20T03:40:22.602Z,1516419622.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:22.998Z,1516419622.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:23.395Z,1516419623.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:23.790Z,1516419623.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:24.193Z,1516419624.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:24.604Z,1516419624.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:24.982Z,1516419624.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:25.383Z,1516419625.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:25.790Z,1516419625.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:26.210Z,1516419626.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:26.607Z,1516419626.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:27.018Z,1516419627.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:27.394Z,1516419627.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:27.784Z,1516419627.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:28.192Z,1516419628.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:28.592Z,1516419628.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:28.983Z,1516419628.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:29.394Z,1516419629.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:29.792Z,1516419629.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:30.192Z,1516419630.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:30.591Z,1516419630.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:30.988Z,1516419630.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:31.406Z,1516419631.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:31.810Z,1516419631.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:32.194Z,1516419632.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:32.612Z,1516419632.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:32.996Z,1516419632.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:36.261Z,1516419636.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:36.404Z,1516419636.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:36.783Z,1516419636.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:37.179Z,1516419637.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:37.583Z,1516419637.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:37.971Z,1516419637.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:38.366Z,1516419638.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:38.763Z,1516419638.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:39.169Z,1516419639.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:39.568Z,1516419639.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:39.969Z,1516419639.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:40.373Z,1516419640.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:40.768Z,1516419640.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:41.169Z,1516419641.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:41.583Z,1516419641.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:41.982Z,1516419641.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:42.382Z,1516419642.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:42.786Z,1516419642.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:43.160Z,1516419643.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:43.557Z,1516419643.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:43.964Z,1516419643.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:44.357Z,1516419644.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:44.761Z,1516419644.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:45.165Z,1516419645.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:45.568Z,1516419645.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:45.966Z,1516419645.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:46.371Z,1516419646.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:46.783Z,1516419646.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:47.178Z,1516419647.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:47.577Z,1516419647.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:47.982Z,1516419647.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:48.362Z,1516419648.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:48.770Z,1516419648.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:49.169Z,1516419649.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:49.568Z,1516419649.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:49.969Z,1516419649.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:50.368Z,1516419650.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:50.768Z,1516419650.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:51.172Z,1516419651.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:51.565Z,1516419651.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:51.977Z,1516419651.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:52.378Z,1516419652.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:52.782Z,1516419652.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:53.181Z,1516419653.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:53.577Z,1516419653.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:53.980Z,1516419653.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:54.360Z,1516419654.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:54.760Z,1516419654.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:55.172Z,1516419655.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:55.556Z,1516419655.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:55.972Z,1516419655.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:56.372Z,1516419656.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:56.756Z,1516419656.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:57.175Z,1516419657.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:57.582Z,1516419657.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:57.981Z,1516419657.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:58.386Z,1516419658.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:58.758Z,1516419658.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:59.160Z,1516419659.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:59.560Z,1516419659.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:40:59.969Z,1516419659.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:00.356Z,1516419660.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:00.776Z,1516419660.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:01.161Z,1516419661.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:01.559Z,1516419661.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:01.963Z,1516419661.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:02.383Z,1516419662.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:02.779Z,1516419662.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:03.184Z,1516419663.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:03.583Z,1516419663.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:03.956Z,1516419663.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:04.360Z,1516419664.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:04.763Z,1516419664.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:05.156Z,1516419665.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:05.567Z,1516419665.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:05.961Z,1516419665.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:06.367Z,1516419666.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:06.767Z,1516419666.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:07.167Z,1516419667.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:07.574Z,1516419667.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:07.985Z,1516419667.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:08.374Z,1516419668.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:08.785Z,1516419668.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:09.167Z,1516419669.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:09.565Z,1516419669.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:09.967Z,1516419669.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:10.371Z,1516419670.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:10.765Z,1516419670.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:11.166Z,1516419671.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:11.567Z,1516419671.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:11.966Z,1516419671.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:12.368Z,1516419672.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:12.781Z,1516419672.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:13.174Z,1516419673.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:13.575Z,1516419673.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:13.980Z,1516419673.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:14.378Z,1516419674.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:14.769Z,1516419674.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:15.178Z,1516419675.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:15.569Z,1516419675.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:15.966Z,1516419675.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:16.366Z,1516419676.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:16.772Z,1516419676.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:17.168Z,1516419677.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:17.572Z,1516419677.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:17.982Z,1516419677.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:18.382Z,1516419678.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:18.786Z,1516419678.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:19.182Z,1516419679.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:19.559Z,1516419679.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:19.963Z,1516419679.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:20.361Z,1516419680.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:20.760Z,1516419680.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:21.163Z,1516419681.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:21.559Z,1516419681.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:21.959Z,1516419681.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:22.364Z,1516419682.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:22.768Z,1516419682.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:23.186Z,1516419683.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:23.587Z,1516419683.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:23.967Z,1516419683.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:24.374Z,1516419684.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:24.767Z,1516419684.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:24.807Z,1516419684.807 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:41:24.807Z,1516419684.807 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2018-01-20T03:41:24.807Z,1516419684.807 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:41:24.820Z,1516419684.820 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:41:25.165Z,1516419685.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:25.220Z,1516419685.220 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:41:25.220Z,1516419685.220 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2018-01-20T03:41:25.570Z,1516419685.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:25.604Z,1516419685.604 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:41:25.605Z,1516419685.605 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:41:25.605Z,1516419685.605 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:41:25.968Z,1516419685.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:26.366Z,1516419686.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:26.768Z,1516419686.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:27.171Z,1516419687.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:27.558Z,1516419687.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:27.969Z,1516419687.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:28.382Z,1516419688.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:28.781Z,1516419688.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:29.182Z,1516419689.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:29.586Z,1516419689.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:29.954Z,1516419689.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:30.371Z,1516419690.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:30.776Z,1516419690.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:31.158Z,1516419691.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:31.559Z,1516419691.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:31.973Z,1516419691.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:32.358Z,1516419692.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:32.396Z,1516419692.396 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T03:36:32.4Z
2018-01-20T03:41:32.396Z,1516419692.396 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T03:41:32.396Z,1516419692.396 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T03:41:32.775Z,1516419692.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:33.219Z,1516419693.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:36.495Z,1516419696.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:36.602Z,1516419696.602 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180119T210901/Courier0168.lzma
2018-01-20T03:41:36.643Z,1516419696.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:37.007Z,1516419697.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:40.777Z,1516419700.777 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0168.lzma.bak
2018-01-20T03:41:40.777Z,1516419700.777 [DataOverHttps](INFO): SBD MOMSN=7726090
2018-01-20T03:41:40.831Z,1516419700.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:41.071Z,1516419701.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:41.314Z,1516419701.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:44.615Z,1516419704.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:44.760Z,1516419704.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:45.121Z,1516419705.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:45.521Z,1516419705.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:45.920Z,1516419705.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:46.332Z,1516419706.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:49.601Z,1516419709.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:49.714Z,1516419709.714 [DataOverHttps](INFO): Sending 253 bytes from file Logs/20180119T210901/Express0169.lzma
2018-01-20T03:41:49.747Z,1516419709.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:50.066Z,1516419710.066 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T03:41:50.084Z,1516419710.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:50.455Z,1516419710.455 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0169.lzma.bak
2018-01-20T03:41:50.456Z,1516419710.456 [DataOverHttps](INFO): SBD MOMSN=7726093
2018-01-20T03:41:50.490Z,1516419710.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:50.988Z,1516419710.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:51.009Z,1516419711.009 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T03:41:51.009Z,1516419711.009 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T03:41:51.010Z,1516419711.010 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T03:41:51.300Z,1516419711.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:54.559Z,1516419714.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:54.671Z,1516419714.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:55.068Z,1516419715.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:55.464Z,1516419715.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:55.866Z,1516419715.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:56.270Z,1516419716.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:56.668Z,1516419716.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:57.059Z,1516419717.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:57.470Z,1516419717.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:57.859Z,1516419717.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:58.259Z,1516419718.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:58.662Z,1516419718.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:59.059Z,1516419719.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:59.459Z,1516419719.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:41:59.862Z,1516419719.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:00.260Z,1516419720.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:00.671Z,1516419720.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:01.063Z,1516419721.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:01.463Z,1516419721.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:01.874Z,1516419721.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:02.270Z,1516419722.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:02.666Z,1516419722.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:03.066Z,1516419723.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:03.467Z,1516419723.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:03.866Z,1516419723.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:04.266Z,1516419724.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:04.670Z,1516419724.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:05.059Z,1516419725.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:05.459Z,1516419725.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:05.858Z,1516419725.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:06.260Z,1516419726.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:06.666Z,1516419726.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:07.063Z,1516419727.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:07.456Z,1516419727.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:07.863Z,1516419727.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:08.270Z,1516419728.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:08.671Z,1516419728.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:09.070Z,1516419729.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:09.470Z,1516419729.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:09.871Z,1516419729.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:10.270Z,1516419730.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:10.666Z,1516419730.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:11.068Z,1516419731.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:11.470Z,1516419731.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:11.878Z,1516419731.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:12.256Z,1516419732.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:12.675Z,1516419732.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:13.066Z,1516419733.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:13.456Z,1516419733.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:13.875Z,1516419733.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:14.266Z,1516419734.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:14.659Z,1516419734.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:15.066Z,1516419735.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:15.458Z,1516419735.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:15.859Z,1516419735.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:16.263Z,1516419736.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:16.663Z,1516419736.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:17.059Z,1516419737.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:17.483Z,1516419737.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:17.863Z,1516419737.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:18.263Z,1516419738.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:18.663Z,1516419738.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:19.073Z,1516419739.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:19.456Z,1516419739.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:19.875Z,1516419739.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:20.302Z,1516419740.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:20.646Z,1516419740.646 [NAL9602](INFO): Powering down
2018-01-20T03:42:20.665Z,1516419740.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:21.071Z,1516419741.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:21.467Z,1516419741.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:21.869Z,1516419741.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:22.277Z,1516419742.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:22.677Z,1516419742.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:23.056Z,1516419743.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:23.465Z,1516419743.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:23.862Z,1516419743.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:24.263Z,1516419744.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:24.668Z,1516419744.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:25.075Z,1516419745.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:25.466Z,1516419745.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:25.869Z,1516419745.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:26.266Z,1516419746.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:26.668Z,1516419746.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:27.069Z,1516419747.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:27.471Z,1516419747.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:27.872Z,1516419747.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:28.275Z,1516419748.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:28.663Z,1516419748.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:29.075Z,1516419749.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:29.460Z,1516419749.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:29.863Z,1516419749.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:30.263Z,1516419750.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:30.663Z,1516419750.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:31.069Z,1516419751.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:31.472Z,1516419751.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:31.867Z,1516419751.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:32.266Z,1516419752.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:32.675Z,1516419752.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:33.059Z,1516419753.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:33.463Z,1516419753.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:33.866Z,1516419753.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:34.256Z,1516419754.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:34.671Z,1516419754.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:35.070Z,1516419755.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:35.463Z,1516419755.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:35.866Z,1516419755.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:36.266Z,1516419756.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:36.666Z,1516419756.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:37.066Z,1516419757.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:37.466Z,1516419757.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:37.866Z,1516419757.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:38.266Z,1516419758.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:38.674Z,1516419758.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:39.056Z,1516419759.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:39.463Z,1516419759.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:39.859Z,1516419759.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:40.259Z,1516419760.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:40.663Z,1516419760.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:41.066Z,1516419761.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:41.456Z,1516419761.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:41.871Z,1516419761.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:42.259Z,1516419762.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:42.660Z,1516419762.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:43.071Z,1516419763.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:43.470Z,1516419763.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:43.863Z,1516419763.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:44.267Z,1516419764.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:44.665Z,1516419764.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:45.068Z,1516419765.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:45.479Z,1516419765.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:45.866Z,1516419765.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:46.256Z,1516419766.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:46.675Z,1516419766.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:47.063Z,1516419767.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:47.459Z,1516419767.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:47.863Z,1516419767.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:48.259Z,1516419768.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:48.660Z,1516419768.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:49.071Z,1516419769.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:49.465Z,1516419769.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:49.870Z,1516419769.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:50.268Z,1516419770.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:50.671Z,1516419770.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:51.071Z,1516419771.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:51.468Z,1516419771.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:54.741Z,1516419774.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:54.869Z,1516419774.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:55.240Z,1516419775.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:55.636Z,1516419775.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:56.040Z,1516419776.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:56.442Z,1516419776.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:56.838Z,1516419776.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:57.235Z,1516419777.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:57.632Z,1516419777.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:58.032Z,1516419778.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:58.442Z,1516419778.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:58.842Z,1516419778.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:59.239Z,1516419779.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:42:59.636Z,1516419779.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:00.038Z,1516419780.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:00.442Z,1516419780.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:00.842Z,1516419780.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:01.239Z,1516419781.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:01.646Z,1516419781.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:02.043Z,1516419782.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:02.443Z,1516419782.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:02.834Z,1516419782.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:03.238Z,1516419783.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:03.637Z,1516419783.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:04.034Z,1516419784.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:04.434Z,1516419784.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:04.840Z,1516419784.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:05.234Z,1516419785.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:05.624Z,1516419785.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:06.043Z,1516419786.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:06.427Z,1516419786.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:06.843Z,1516419786.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:07.243Z,1516419787.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:07.627Z,1516419787.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:08.027Z,1516419788.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:08.435Z,1516419788.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:08.827Z,1516419788.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:09.224Z,1516419789.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:09.631Z,1516419789.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:10.035Z,1516419790.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:10.424Z,1516419790.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:10.831Z,1516419790.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:11.236Z,1516419791.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:11.632Z,1516419791.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:12.043Z,1516419792.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:12.434Z,1516419792.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:12.840Z,1516419792.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:13.240Z,1516419793.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:13.635Z,1516419793.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:14.035Z,1516419794.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:14.434Z,1516419794.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:14.843Z,1516419794.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:15.224Z,1516419795.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:15.643Z,1516419795.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:16.027Z,1516419796.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:16.433Z,1516419796.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:16.845Z,1516419796.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:17.227Z,1516419797.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:17.628Z,1516419797.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:18.035Z,1516419798.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:18.428Z,1516419798.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:18.836Z,1516419798.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:19.231Z,1516419799.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:19.635Z,1516419799.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:20.035Z,1516419800.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:20.431Z,1516419800.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:20.827Z,1516419800.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:21.227Z,1516419801.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:21.635Z,1516419801.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:22.035Z,1516419802.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:22.428Z,1516419802.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:22.843Z,1516419802.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:23.236Z,1516419803.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:23.632Z,1516419803.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:24.043Z,1516419804.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:24.438Z,1516419804.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:24.838Z,1516419804.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:25.234Z,1516419805.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:25.635Z,1516419805.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:26.034Z,1516419806.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:26.438Z,1516419806.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:26.834Z,1516419806.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:27.234Z,1516419807.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:27.638Z,1516419807.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:28.027Z,1516419808.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:28.427Z,1516419808.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:28.850Z,1516419808.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:29.227Z,1516419809.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:29.624Z,1516419809.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:30.026Z,1516419810.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:30.427Z,1516419810.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:30.828Z,1516419810.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:31.230Z,1516419811.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:31.627Z,1516419811.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:32.027Z,1516419812.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:32.426Z,1516419812.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:32.827Z,1516419812.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:33.224Z,1516419813.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:33.630Z,1516419813.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:34.035Z,1516419814.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:34.427Z,1516419814.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:34.830Z,1516419814.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:35.235Z,1516419815.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:35.624Z,1516419815.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:36.042Z,1516419816.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:36.435Z,1516419816.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:36.831Z,1516419816.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:37.235Z,1516419817.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:37.636Z,1516419817.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:38.039Z,1516419818.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:38.440Z,1516419818.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:38.834Z,1516419818.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:39.234Z,1516419819.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:39.638Z,1516419819.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:40.039Z,1516419820.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:40.434Z,1516419820.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:40.838Z,1516419820.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:41.234Z,1516419821.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:41.634Z,1516419821.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:42.034Z,1516419822.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:42.434Z,1516419822.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:42.834Z,1516419822.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:43.238Z,1516419823.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:43.638Z,1516419823.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:44.042Z,1516419824.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:44.438Z,1516419824.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:44.839Z,1516419824.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:45.234Z,1516419825.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:45.633Z,1516419825.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:46.043Z,1516419826.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:46.434Z,1516419826.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:46.838Z,1516419826.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:47.239Z,1516419827.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:47.634Z,1516419827.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:48.038Z,1516419828.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:48.438Z,1516419828.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:48.836Z,1516419828.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:49.235Z,1516419829.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:49.643Z,1516419829.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:50.034Z,1516419830.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:50.438Z,1516419830.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:50.837Z,1516419830.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:51.236Z,1516419831.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:51.635Z,1516419831.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:54.917Z,1516419834.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:55.047Z,1516419835.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:55.411Z,1516419835.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:55.807Z,1516419835.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:56.207Z,1516419836.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:56.601Z,1516419836.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:57.003Z,1516419837.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:57.402Z,1516419837.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:57.804Z,1516419837.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:58.205Z,1516419838.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:58.606Z,1516419838.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:59.002Z,1516419839.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:59.402Z,1516419839.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:43:59.806Z,1516419839.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:00.205Z,1516419840.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:00.607Z,1516419840.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:01.002Z,1516419841.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:01.406Z,1516419841.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:01.810Z,1516419841.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:02.192Z,1516419842.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:02.606Z,1516419842.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:03.007Z,1516419843.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:03.402Z,1516419843.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:03.802Z,1516419843.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:04.207Z,1516419844.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:04.592Z,1516419844.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:05.006Z,1516419845.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:05.411Z,1516419845.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:05.795Z,1516419845.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:06.206Z,1516419846.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:06.602Z,1516419846.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:06.995Z,1516419846.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:07.399Z,1516419847.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:07.811Z,1516419847.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:08.199Z,1516419848.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:08.602Z,1516419848.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:09.003Z,1516419849.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:09.396Z,1516419849.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:09.798Z,1516419849.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:10.203Z,1516419850.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:10.599Z,1516419850.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:10.999Z,1516419850.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:11.403Z,1516419851.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:11.799Z,1516419851.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:12.207Z,1516419852.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:12.608Z,1516419852.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:13.011Z,1516419853.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:13.405Z,1516419853.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:13.808Z,1516419853.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:14.207Z,1516419854.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:14.605Z,1516419854.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:15.012Z,1516419855.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:15.408Z,1516419855.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:15.808Z,1516419855.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:16.212Z,1516419856.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:16.607Z,1516419856.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:16.999Z,1516419856.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:17.411Z,1516419857.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:17.799Z,1516419857.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:18.198Z,1516419858.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:18.599Z,1516419858.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:18.000Z,1516419859.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:19.416Z,1516419859.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:19.799Z,1516419859.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:20.215Z,1516419860.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:20.615Z,1516419860.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:20.998Z,1516419860.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:21.403Z,1516419861.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:21.814Z,1516419861.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:22.215Z,1516419862.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:22.599Z,1516419862.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:23.003Z,1516419863.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:23.396Z,1516419863.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:23.797Z,1516419863.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:24.202Z,1516419864.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:24.602Z,1516419864.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:25.002Z,1516419865.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:25.408Z,1516419865.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:25.810Z,1516419865.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:25.857Z,1516419865.857 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:44:25.858Z,1516419865.858 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2018-01-20T03:44:25.858Z,1516419865.858 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:44:25.895Z,1516419865.895 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:44:26.207Z,1516419866.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:26.258Z,1516419866.258 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:44:26.258Z,1516419866.258 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2018-01-20T03:44:26.602Z,1516419866.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:26.649Z,1516419866.649 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:44:26.650Z,1516419866.650 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:44:26.650Z,1516419866.650 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:44:27.006Z,1516419867.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:27.404Z,1516419867.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:27.806Z,1516419867.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:28.206Z,1516419868.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:28.606Z,1516419868.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:29.010Z,1516419869.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:29.405Z,1516419869.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:29.806Z,1516419869.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:30.205Z,1516419870.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:30.605Z,1516419870.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:31.007Z,1516419871.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:31.409Z,1516419871.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:31.814Z,1516419871.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:32.196Z,1516419872.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:32.596Z,1516419872.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:33.010Z,1516419873.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:33.414Z,1516419873.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:33.805Z,1516419873.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:34.204Z,1516419874.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:34.602Z,1516419874.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:35.004Z,1516419875.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:35.398Z,1516419875.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:35.804Z,1516419875.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:36.205Z,1516419876.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:36.599Z,1516419876.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:37.002Z,1516419877.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:37.008Z,1516419877.008 [PNI_TCM](ERROR): CRC does not match. Expected:0x44889 got:0x49483
2018-01-20T03:44:37.407Z,1516419877.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:37.802Z,1516419877.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:38.203Z,1516419878.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:38.606Z,1516419878.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:38.612Z,1516419878.612 [PNI_TCM](ERROR): CRC does not match. Expected:0x777 got:0x6013
2018-01-20T03:44:39.006Z,1516419879.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:39.404Z,1516419879.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:39.805Z,1516419879.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:40.206Z,1516419880.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:40.213Z,1516419880.213 [PNI_TCM](ERROR): CRC does not match. Expected:0x22559 got:0x58120
2018-01-20T03:44:40.605Z,1516419880.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:41.011Z,1516419881.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:41.404Z,1516419881.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:41.809Z,1516419881.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:41.816Z,1516419881.816 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2018-01-20T03:44:42.209Z,1516419882.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:42.604Z,1516419882.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:43.007Z,1516419883.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:43.414Z,1516419883.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:43.420Z,1516419883.420 [PNI_TCM](ERROR): CRC does not match. Expected:0x43828 got:0x2840
2018-01-20T03:44:43.796Z,1516419883.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:44.212Z,1516419884.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:44.599Z,1516419884.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:44.992Z,1516419884.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:45.399Z,1516419885.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:45.801Z,1516419885.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:46.195Z,1516419886.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:46.603Z,1516419886.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:46.000Z,1516419887.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:47.397Z,1516419887.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:47.799Z,1516419887.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:48.203Z,1516419888.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:48.596Z,1516419888.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:49.015Z,1516419889.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:49.021Z,1516419889.021 [PNI_TCM](ERROR): CRC does not match. Expected:0x17469 got:0x25421
2018-01-20T03:44:49.399Z,1516419889.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:49.795Z,1516419889.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:50.199Z,1516419890.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:50.602Z,1516419890.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:50.992Z,1516419890.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:51.399Z,1516419891.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:51.811Z,1516419891.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:55.088Z,1516419895.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:55.199Z,1516419895.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:55.599Z,1516419895.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:55.999Z,1516419895.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:56.395Z,1516419896.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:56.794Z,1516419896.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:57.187Z,1516419897.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:57.594Z,1516419897.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:57.992Z,1516419897.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:58.391Z,1516419898.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:58.794Z,1516419898.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:59.194Z,1516419899.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:59.592Z,1516419899.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:44:59.996Z,1516419899.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:00.393Z,1516419900.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:00.790Z,1516419900.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:01.196Z,1516419901.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:01.594Z,1516419901.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:01.995Z,1516419901.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:02.398Z,1516419902.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:02.795Z,1516419902.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:03.191Z,1516419903.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:03.593Z,1516419903.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:03.995Z,1516419903.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:04.391Z,1516419904.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:04.798Z,1516419904.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:05.200Z,1516419905.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:05.592Z,1516419905.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:05.993Z,1516419905.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:06.393Z,1516419906.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:06.790Z,1516419906.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:07.198Z,1516419907.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:07.595Z,1516419907.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:07.993Z,1516419907.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:08.398Z,1516419908.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:08.793Z,1516419908.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:09.191Z,1516419909.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:09.593Z,1516419909.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:09.999Z,1516419909.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:10.395Z,1516419910.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:10.800Z,1516419910.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:11.194Z,1516419911.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:11.583Z,1516419911.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:12.000Z,1516419912.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:12.390Z,1516419912.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:12.784Z,1516419912.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:13.187Z,1516419913.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:13.587Z,1516419913.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:13.987Z,1516419913.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:14.399Z,1516419914.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:14.787Z,1516419914.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:15.183Z,1516419915.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:15.591Z,1516419915.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:15.987Z,1516419915.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:16.390Z,1516419916.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:16.791Z,1516419916.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:17.187Z,1516419917.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:17.587Z,1516419917.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:17.984Z,1516419917.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:18.388Z,1516419918.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:18.793Z,1516419918.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:19.188Z,1516419919.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:19.595Z,1516419919.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:19.995Z,1516419919.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:20.391Z,1516419920.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:20.793Z,1516419920.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:21.190Z,1516419921.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:21.590Z,1516419921.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:21.993Z,1516419921.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:22.395Z,1516419922.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:22.798Z,1516419922.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:23.198Z,1516419923.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:23.598Z,1516419923.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:23.990Z,1516419923.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:24.389Z,1516419924.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:24.798Z,1516419924.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:25.184Z,1516419925.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:25.590Z,1516419925.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:25.983Z,1516419925.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:26.383Z,1516419926.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:26.790Z,1516419926.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:27.183Z,1516419927.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:27.580Z,1516419927.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:27.987Z,1516419927.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:28.383Z,1516419928.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:28.783Z,1516419928.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:29.191Z,1516419929.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:29.583Z,1516419929.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:29.983Z,1516419929.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:30.387Z,1516419930.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:30.790Z,1516419930.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:31.184Z,1516419931.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:31.587Z,1516419931.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:31.992Z,1516419931.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:32.387Z,1516419932.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:32.792Z,1516419932.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:33.192Z,1516419933.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:33.591Z,1516419933.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:33.991Z,1516419933.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:34.394Z,1516419934.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:34.796Z,1516419934.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:35.193Z,1516419935.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:35.594Z,1516419935.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:35.995Z,1516419935.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:36.393Z,1516419936.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:36.798Z,1516419936.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:37.192Z,1516419937.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:37.593Z,1516419937.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:37.998Z,1516419937.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:38.392Z,1516419938.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:38.804Z,1516419938.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:39.183Z,1516419939.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:39.583Z,1516419939.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:39.990Z,1516419939.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:40.398Z,1516419940.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:40.798Z,1516419940.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:41.195Z,1516419941.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:41.590Z,1516419941.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:41.990Z,1516419941.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:42.392Z,1516419942.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:42.791Z,1516419942.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:43.194Z,1516419943.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:43.600Z,1516419943.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:43.998Z,1516419943.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:44.391Z,1516419944.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:44.791Z,1516419944.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:45.191Z,1516419945.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:45.580Z,1516419945.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:46.000Z,1516419946.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:46.383Z,1516419946.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:46.783Z,1516419946.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:47.199Z,1516419947.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:47.587Z,1516419947.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:47.988Z,1516419947.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:48.388Z,1516419948.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:48.783Z,1516419948.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:49.200Z,1516419949.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:49.587Z,1516419949.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:49.990Z,1516419949.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:50.384Z,1516419950.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:50.791Z,1516419950.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:51.183Z,1516419951.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:51.581Z,1516419951.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:51.988Z,1516419951.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:55.268Z,1516419955.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:55.386Z,1516419955.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:55.735Z,1516419955.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:56.146Z,1516419956.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:56.536Z,1516419956.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:56.943Z,1516419956.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:57.334Z,1516419957.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:57.744Z,1516419957.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:58.136Z,1516419958.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:58.534Z,1516419958.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:58.944Z,1516419958.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:59.335Z,1516419959.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:45:59.739Z,1516419959.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:00.134Z,1516419960.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:00.544Z,1516419960.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:00.934Z,1516419960.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:01.324Z,1516419961.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:01.736Z,1516419961.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:02.127Z,1516419962.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:02.528Z,1516419962.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:02.935Z,1516419962.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:03.327Z,1516419963.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:03.727Z,1516419963.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:04.131Z,1516419964.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:04.535Z,1516419964.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:04.939Z,1516419964.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:05.339Z,1516419965.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:05.739Z,1516419965.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:06.140Z,1516419966.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:06.537Z,1516419966.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:06.942Z,1516419966.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:07.336Z,1516419967.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:07.734Z,1516419967.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:08.127Z,1516419968.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:08.527Z,1516419968.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:08.951Z,1516419968.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:09.327Z,1516419969.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:09.744Z,1516419969.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:10.131Z,1516419970.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:10.535Z,1516419970.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:10.961Z,1516419970.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:11.335Z,1516419971.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:11.727Z,1516419971.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:12.128Z,1516419972.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:12.534Z,1516419972.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:12.938Z,1516419972.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:13.334Z,1516419973.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:13.735Z,1516419973.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:14.135Z,1516419974.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:14.531Z,1516419974.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:14.935Z,1516419974.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:15.333Z,1516419975.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:15.734Z,1516419975.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:16.133Z,1516419976.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:16.533Z,1516419976.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:16.934Z,1516419976.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:17.335Z,1516419977.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:17.734Z,1516419977.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:18.136Z,1516419978.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:18.534Z,1516419978.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:18.934Z,1516419978.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:19.334Z,1516419979.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:19.738Z,1516419979.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:20.137Z,1516419980.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:20.534Z,1516419980.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:20.934Z,1516419980.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:21.339Z,1516419981.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:21.734Z,1516419981.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:22.134Z,1516419982.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:22.534Z,1516419982.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:22.934Z,1516419982.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:23.334Z,1516419983.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:23.739Z,1516419983.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:24.134Z,1516419984.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:24.534Z,1516419984.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:24.934Z,1516419984.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:25.334Z,1516419985.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:25.734Z,1516419985.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:26.133Z,1516419986.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:26.536Z,1516419986.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:26.938Z,1516419986.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:27.334Z,1516419987.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:27.739Z,1516419987.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:28.134Z,1516419988.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:28.541Z,1516419988.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:28.942Z,1516419988.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:29.342Z,1516419989.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:29.736Z,1516419989.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:30.134Z,1516419990.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:30.535Z,1516419990.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:30.943Z,1516419990.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:31.336Z,1516419991.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:31.738Z,1516419991.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:32.139Z,1516419992.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:32.534Z,1516419992.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:32.935Z,1516419992.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:33.334Z,1516419993.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:33.727Z,1516419993.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:34.142Z,1516419994.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:34.534Z,1516419994.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:34.927Z,1516419994.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:35.331Z,1516419995.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:35.732Z,1516419995.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:36.136Z,1516419996.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:36.532Z,1516419996.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:36.940Z,1516419996.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:37.332Z,1516419997.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:37.734Z,1516419997.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:38.139Z,1516419998.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:38.535Z,1516419998.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:38.933Z,1516419998.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:39.338Z,1516419999.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:39.727Z,1516419999.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:40.143Z,1516420000.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:40.544Z,1516420000.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:40.927Z,1516420000.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:41.331Z,1516420001.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:41.731Z,1516420001.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:42.126Z,1516420002.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:42.526Z,1516420002.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:42.931Z,1516420002.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:43.327Z,1516420003.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:43.731Z,1516420003.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:44.131Z,1516420004.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:44.527Z,1516420004.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:44.926Z,1516420004.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:45.331Z,1516420005.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:45.734Z,1516420005.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:46.131Z,1516420006.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:46.535Z,1516420006.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:46.927Z,1516420006.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:47.330Z,1516420007.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:47.729Z,1516420007.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:48.127Z,1516420008.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:48.535Z,1516420008.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:48.936Z,1516420008.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:49.335Z,1516420009.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:49.736Z,1516420009.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:50.139Z,1516420010.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:50.535Z,1516420010.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:50.938Z,1516420010.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:51.331Z,1516420011.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:51.352Z,1516420011.352 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T03:46:51.352Z,1516420011.352 [Default:CheckIn:C.Wait] Stopped
2018-01-20T03:46:51.352Z,1516420011.352 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T03:46:51.353Z,1516420011.353 [Default:CheckIn:D] Running Loop=1
2018-01-20T03:46:51.737Z,1516420011.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:51.759Z,1516420011.759 [Default:CheckIn:D] Stopped
2018-01-20T03:46:51.759Z,1516420011.759 [Default:CheckIn:E] Running Loop=1
2018-01-20T03:46:52.134Z,1516420012.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:52.155Z,1516420012.155 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 103.252222 min 
2018-01-20T03:46:52.156Z,1516420012.156 [Default:CheckIn:E] Stopped
2018-01-20T03:46:52.156Z,1516420012.156 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T03:46:52.156Z,1516420012.156 [Default:CheckIn] Stopped
2018-01-20T03:46:52.156Z,1516420012.156 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T03:46:52.156Z,1516420012.156 [Default:CheckIn](INFO): Running loop #11
2018-01-20T03:46:52.156Z,1516420012.156 [Default:CheckIn] Running Loop=11
2018-01-20T03:46:52.156Z,1516420012.156 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T03:46:52.157Z,1516420012.157 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T03:46:55.407Z,1516420015.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:55.513Z,1516420015.513 [NAL9602](INFO): Powering up
2018-01-20T03:46:55.543Z,1516420015.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:55.900Z,1516420015.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:56.297Z,1516420016.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:56.690Z,1516420016.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:57.098Z,1516420017.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:57.503Z,1516420017.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:57.898Z,1516420017.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:58.294Z,1516420018.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:58.703Z,1516420018.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:59.087Z,1516420019.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:59.490Z,1516420019.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:46:59.892Z,1516420019.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:00.298Z,1516420020.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:00.697Z,1516420020.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:01.096Z,1516420021.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:01.494Z,1516420021.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:01.895Z,1516420021.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:02.290Z,1516420022.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:02.699Z,1516420022.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:03.108Z,1516420023.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:03.485Z,1516420023.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:03.883Z,1516420023.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:04.283Z,1516420024.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:04.683Z,1516420024.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:05.094Z,1516420025.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:05.491Z,1516420025.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:05.891Z,1516420025.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:06.298Z,1516420026.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:06.678Z,1516420026.678 [NAL9602](INFO): NAL9602 initialized
2018-01-20T03:47:06.695Z,1516420026.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:07.090Z,1516420027.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:07.502Z,1516420027.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:07.898Z,1516420027.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:08.306Z,1516420028.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:08.688Z,1516420028.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:09.088Z,1516420029.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:09.495Z,1516420029.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:09.896Z,1516420029.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:10.290Z,1516420030.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:10.690Z,1516420030.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:11.090Z,1516420031.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:11.486Z,1516420031.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:11.895Z,1516420031.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:12.290Z,1516420032.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:12.690Z,1516420032.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:13.090Z,1516420033.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:13.490Z,1516420033.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:13.890Z,1516420033.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:14.294Z,1516420034.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:14.683Z,1516420034.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:15.090Z,1516420035.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:15.483Z,1516420035.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:15.883Z,1516420035.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:16.298Z,1516420036.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:16.699Z,1516420036.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:17.100Z,1516420037.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:17.490Z,1516420037.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:17.899Z,1516420037.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:18.287Z,1516420038.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:18.692Z,1516420038.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:19.095Z,1516420039.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:19.495Z,1516420039.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:19.895Z,1516420039.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:20.295Z,1516420040.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:20.696Z,1516420040.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:21.090Z,1516420041.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:21.490Z,1516420041.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:21.895Z,1516420041.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:22.290Z,1516420042.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:22.691Z,1516420042.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:23.092Z,1516420043.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:23.486Z,1516420043.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:23.899Z,1516420043.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:24.308Z,1516420044.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:24.687Z,1516420044.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:25.091Z,1516420045.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:25.491Z,1516420045.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:25.886Z,1516420045.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:26.291Z,1516420046.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:26.691Z,1516420046.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:26.744Z,1516420046.744 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:47:26.744Z,1516420046.744 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2018-01-20T03:47:26.744Z,1516420046.744 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:47:26.801Z,1516420046.801 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:47:27.093Z,1516420047.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:27.163Z,1516420047.163 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:47:27.166Z,1516420047.166 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2018-01-20T03:47:27.493Z,1516420047.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:27.519Z,1516420047.519 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:47:27.519Z,1516420047.519 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:47:27.519Z,1516420047.519 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:47:27.900Z,1516420047.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:28.283Z,1516420048.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:28.700Z,1516420048.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:29.091Z,1516420049.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:29.491Z,1516420049.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:29.887Z,1516420049.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:30.289Z,1516420050.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:30.692Z,1516420050.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:31.087Z,1516420051.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:31.492Z,1516420051.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:31.897Z,1516420051.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:32.292Z,1516420052.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:32.695Z,1516420052.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:33.094Z,1516420053.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:33.499Z,1516420053.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:33.894Z,1516420053.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:34.299Z,1516420054.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:34.687Z,1516420054.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:35.099Z,1516420055.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:35.487Z,1516420055.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:35.898Z,1516420055.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:36.298Z,1516420056.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:36.699Z,1516420056.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:37.083Z,1516420057.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:37.487Z,1516420057.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:37.887Z,1516420057.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:38.287Z,1516420058.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:38.674Z,1516420058.674 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-01-20T03:47:38.753Z,1516420058.753 [NAL9602](FAULT): received: 
+CSQ:0

OK62, 2, 0, 0, 0

OK
2018-01-20T03:47:38.753Z,1516420058.753 [NAL9602] Data Fault, FailCount= 1
2018-01-20T03:47:38.753Z,1516420058.753 [NAL9602](ERROR): Data Fault
2018-01-20T03:47:38.771Z,1516420058.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:38.869Z,1516420058.869 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T03:47:39.074Z,1516420059.074 [NAL9602](INFO): Powering down
2018-01-20T03:47:39.091Z,1516420059.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:39.490Z,1516420059.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:39.891Z,1516420059.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:39.954Z,1516420059.954 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T03:47:39.954Z,1516420059.954 [NAL9602] No Fault, FailCount= 1
2018-01-20T03:47:40.295Z,1516420060.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:40.691Z,1516420060.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:41.099Z,1516420061.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:41.492Z,1516420061.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:41.895Z,1516420061.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:42.281Z,1516420062.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:42.700Z,1516420062.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:43.087Z,1516420063.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:43.484Z,1516420063.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:43.892Z,1516420063.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:44.296Z,1516420064.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:44.694Z,1516420064.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:45.090Z,1516420065.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:45.498Z,1516420065.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:45.886Z,1516420065.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:46.287Z,1516420066.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:46.691Z,1516420066.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:47.093Z,1516420067.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:47.503Z,1516420067.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:47.898Z,1516420067.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:48.282Z,1516420068.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:48.690Z,1516420068.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:49.083Z,1516420069.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:49.486Z,1516420069.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:49.892Z,1516420069.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:50.294Z,1516420070.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:50.694Z,1516420070.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:51.090Z,1516420071.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:51.494Z,1516420071.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:51.894Z,1516420071.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:52.287Z,1516420072.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:55.717Z,1516420075.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:55.835Z,1516420075.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:56.221Z,1516420076.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:56.619Z,1516420076.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:57.017Z,1516420077.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:57.419Z,1516420077.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:57.815Z,1516420077.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:58.217Z,1516420078.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:58.623Z,1516420078.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:59.006Z,1516420079.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:59.414Z,1516420079.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:47:59.810Z,1516420079.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:00.206Z,1516420080.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:00.615Z,1516420080.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:01.011Z,1516420081.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:01.408Z,1516420081.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:01.812Z,1516420081.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:02.215Z,1516420082.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:02.612Z,1516420082.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:03.024Z,1516420083.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:03.420Z,1516420083.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:03.820Z,1516420083.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:04.217Z,1516420084.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:04.617Z,1516420084.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:05.014Z,1516420085.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:05.417Z,1516420085.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:05.817Z,1516420085.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:06.214Z,1516420086.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:06.622Z,1516420086.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:07.022Z,1516420087.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:07.416Z,1516420087.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:07.823Z,1516420087.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:08.214Z,1516420088.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:08.614Z,1516420088.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:09.019Z,1516420089.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:09.394Z,1516420089.394 [NAL9602](INFO): Powering up NAL9602
2018-01-20T03:48:09.414Z,1516420089.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:09.822Z,1516420089.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:10.223Z,1516420090.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:10.614Z,1516420090.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:11.006Z,1516420091.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:11.423Z,1516420091.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:11.811Z,1516420091.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:12.211Z,1516420092.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:12.607Z,1516420092.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:13.011Z,1516420093.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:13.407Z,1516420093.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:13.806Z,1516420093.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:14.215Z,1516420094.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:14.606Z,1516420094.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:15.006Z,1516420095.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:15.411Z,1516420095.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:15.814Z,1516420095.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:16.214Z,1516420096.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:16.615Z,1516420096.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:17.018Z,1516420097.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:17.412Z,1516420097.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:17.817Z,1516420097.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:18.217Z,1516420098.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:18.614Z,1516420098.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:19.017Z,1516420099.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:19.418Z,1516420099.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:19.818Z,1516420099.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:20.222Z,1516420100.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:20.594Z,1516420100.594 [NAL9602](INFO): NAL9602 initialized
2018-01-20T03:48:20.617Z,1516420100.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:21.007Z,1516420101.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:21.434Z,1516420101.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:21.826Z,1516420101.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:22.227Z,1516420102.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:22.611Z,1516420102.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:23.012Z,1516420103.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:23.427Z,1516420103.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:23.825Z,1516420103.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:24.226Z,1516420104.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:24.614Z,1516420104.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:25.010Z,1516420105.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:25.411Z,1516420105.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:25.815Z,1516420105.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:26.210Z,1516420106.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:26.607Z,1516420106.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:27.008Z,1516420107.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:27.415Z,1516420107.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:27.811Z,1516420107.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:28.235Z,1516420108.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:28.630Z,1516420108.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:29.018Z,1516420109.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:29.418Z,1516420109.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:29.811Z,1516420109.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:30.211Z,1516420110.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:30.608Z,1516420110.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:31.015Z,1516420111.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:31.407Z,1516420111.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:31.815Z,1516420111.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:32.210Z,1516420112.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:32.611Z,1516420112.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:33.008Z,1516420113.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:33.429Z,1516420113.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:33.822Z,1516420113.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:34.222Z,1516420114.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:34.630Z,1516420114.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:35.017Z,1516420115.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:35.412Z,1516420115.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:35.816Z,1516420115.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:36.219Z,1516420116.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:36.615Z,1516420116.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:37.025Z,1516420117.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:37.421Z,1516420117.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:37.818Z,1516420117.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:38.224Z,1516420118.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:38.630Z,1516420118.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:39.034Z,1516420119.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:39.430Z,1516420119.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:39.834Z,1516420119.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:40.209Z,1516420120.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:40.611Z,1516420120.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:41.013Z,1516420121.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:41.419Z,1516420121.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:41.822Z,1516420121.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:42.221Z,1516420122.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:42.622Z,1516420122.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:43.039Z,1516420123.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:43.413Z,1516420123.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:43.824Z,1516420123.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:44.222Z,1516420124.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:44.641Z,1516420124.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:45.028Z,1516420125.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:45.417Z,1516420125.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:45.858Z,1516420125.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:46.217Z,1516420126.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:46.617Z,1516420126.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:47.023Z,1516420127.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:47.444Z,1516420127.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:47.813Z,1516420127.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:48.225Z,1516420128.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:48.619Z,1516420128.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:49.024Z,1516420129.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:49.424Z,1516420129.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:49.830Z,1516420129.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:50.259Z,1516420130.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:50.613Z,1516420130.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:51.014Z,1516420131.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:51.423Z,1516420131.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:51.812Z,1516420131.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:52.213Z,1516420132.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:52.618Z,1516420132.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:57.774Z,1516420137.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:57.910Z,1516420137.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:58.279Z,1516420138.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:58.678Z,1516420138.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:59.066Z,1516420139.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:59.474Z,1516420139.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:48:59.875Z,1516420139.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:00.266Z,1516420140.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:00.675Z,1516420140.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:01.072Z,1516420141.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:01.465Z,1516420141.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:01.875Z,1516420141.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:02.284Z,1516420142.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:02.680Z,1516420142.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:03.089Z,1516420143.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:03.491Z,1516420143.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:03.882Z,1516420143.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:04.267Z,1516420144.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:04.663Z,1516420144.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:05.062Z,1516420145.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:05.467Z,1516420145.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:05.863Z,1516420145.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:06.262Z,1516420146.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:06.667Z,1516420146.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:07.063Z,1516420147.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:07.463Z,1516420147.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:07.906Z,1516420147.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:08.282Z,1516420148.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:08.681Z,1516420148.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:09.082Z,1516420149.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:09.467Z,1516420149.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:09.865Z,1516420149.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:10.267Z,1516420150.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:10.674Z,1516420150.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:11.070Z,1516420151.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:11.467Z,1516420151.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:11.868Z,1516420151.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:12.286Z,1516420152.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:12.670Z,1516420152.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:13.090Z,1516420153.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:13.489Z,1516420153.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:13.891Z,1516420153.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:14.285Z,1516420154.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:14.671Z,1516420154.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:15.087Z,1516420155.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:15.467Z,1516420155.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:15.870Z,1516420155.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:16.267Z,1516420156.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:16.671Z,1516420156.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:17.066Z,1516420157.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:17.467Z,1516420157.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:17.863Z,1516420157.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:18.289Z,1516420158.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:18.694Z,1516420158.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:19.092Z,1516420159.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:19.490Z,1516420159.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:19.867Z,1516420159.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:20.268Z,1516420160.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:20.671Z,1516420160.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:21.067Z,1516420161.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:21.463Z,1516420161.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:21.870Z,1516420161.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:22.270Z,1516420162.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:22.667Z,1516420162.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:23.071Z,1516420163.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:23.485Z,1516420163.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:23.893Z,1516420163.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:23.923Z,1516420163.923 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T03:49:24.292Z,1516420164.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:24.690Z,1516420164.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:25.066Z,1516420165.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:25.472Z,1516420165.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:25.875Z,1516420165.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:26.263Z,1516420166.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:26.676Z,1516420166.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:27.075Z,1516420167.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:27.475Z,1516420167.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:27.872Z,1516420167.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:28.283Z,1516420168.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:28.690Z,1516420168.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:29.090Z,1516420169.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:29.478Z,1516420169.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:29.890Z,1516420169.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:30.277Z,1516420170.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:30.680Z,1516420170.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:31.071Z,1516420171.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:31.474Z,1516420171.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:31.876Z,1516420171.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:32.283Z,1516420172.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:32.683Z,1516420172.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:33.072Z,1516420173.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:33.475Z,1516420173.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:33.886Z,1516420173.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:34.290Z,1516420174.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:34.690Z,1516420174.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:35.078Z,1516420175.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:35.483Z,1516420175.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:35.868Z,1516420175.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:36.266Z,1516420176.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:36.669Z,1516420176.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:37.066Z,1516420177.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:37.466Z,1516420177.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:37.874Z,1516420177.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:38.266Z,1516420178.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:38.665Z,1516420178.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:39.082Z,1516420179.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:39.480Z,1516420179.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:39.876Z,1516420179.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:40.282Z,1516420180.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:40.668Z,1516420180.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:41.068Z,1516420181.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:41.481Z,1516420181.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:41.487Z,1516420181.487 [PNI_TCM](ERROR): CRC does not match. Expected:0x20024 got:0x60441
2018-01-20T03:49:41.877Z,1516420181.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:42.271Z,1516420182.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:42.674Z,1516420182.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:43.073Z,1516420183.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:43.080Z,1516420183.080 [PNI_TCM](ERROR): CRC does not match. Expected:0x28889 got:0x16822
2018-01-20T03:49:43.472Z,1516420183.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:43.874Z,1516420183.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:44.284Z,1516420184.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:44.682Z,1516420184.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:45.087Z,1516420185.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:45.483Z,1516420185.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:45.862Z,1516420185.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:46.271Z,1516420186.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:46.670Z,1516420186.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:47.065Z,1516420187.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:47.489Z,1516420187.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:47.863Z,1516420187.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:48.266Z,1516420188.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:48.669Z,1516420188.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:49.070Z,1516420189.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:49.479Z,1516420189.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:49.894Z,1516420189.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:50.279Z,1516420190.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:50.678Z,1516420190.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:51.075Z,1516420191.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:51.467Z,1516420191.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:51.870Z,1516420191.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:52.270Z,1516420192.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:52.668Z,1516420192.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:55.974Z,1516420195.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:56.113Z,1516420196.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:56.486Z,1516420196.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:56.882Z,1516420196.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:57.273Z,1516420197.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:57.673Z,1516420197.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:58.066Z,1516420198.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:58.469Z,1516420198.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:58.875Z,1516420198.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:59.268Z,1516420199.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:49:59.669Z,1516420199.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:00.068Z,1516420200.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:00.462Z,1516420200.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:00.876Z,1516420200.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:01.278Z,1516420201.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:01.677Z,1516420201.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:02.078Z,1516420202.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:02.459Z,1516420202.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:02.858Z,1516420202.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:03.266Z,1516420203.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:03.659Z,1516420203.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:04.059Z,1516420204.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:04.475Z,1516420204.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:04.859Z,1516420204.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:05.257Z,1516420205.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:05.675Z,1516420205.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:06.083Z,1516420206.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:06.477Z,1516420206.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:06.882Z,1516420206.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:07.278Z,1516420207.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:07.657Z,1516420207.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:08.066Z,1516420208.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:08.472Z,1516420208.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:08.875Z,1516420208.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:09.283Z,1516420209.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:09.659Z,1516420209.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:10.060Z,1516420210.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:10.463Z,1516420210.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:10.863Z,1516420210.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:11.280Z,1516420211.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:11.686Z,1516420211.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:12.070Z,1516420212.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:12.482Z,1516420212.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:12.863Z,1516420212.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:13.259Z,1516420213.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:13.663Z,1516420213.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:14.067Z,1516420214.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:14.463Z,1516420214.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:14.866Z,1516420214.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:15.271Z,1516420215.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:15.668Z,1516420215.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:16.072Z,1516420216.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:16.493Z,1516420216.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:16.885Z,1516420216.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:17.281Z,1516420217.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:17.682Z,1516420217.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:18.059Z,1516420218.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:18.457Z,1516420218.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:18.874Z,1516420218.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:19.259Z,1516420219.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:19.657Z,1516420219.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:20.074Z,1516420220.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:20.460Z,1516420220.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:20.875Z,1516420220.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:21.263Z,1516420221.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:21.680Z,1516420221.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:22.083Z,1516420222.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:22.490Z,1516420222.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:22.883Z,1516420222.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:23.261Z,1516420223.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:23.668Z,1516420223.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:24.059Z,1516420224.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:24.471Z,1516420224.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:24.871Z,1516420224.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:25.271Z,1516420225.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:25.667Z,1516420225.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:26.071Z,1516420226.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:26.468Z,1516420226.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:26.878Z,1516420226.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:27.310Z,1516420227.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:27.677Z,1516420227.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:27.696Z,1516420227.696 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:50:27.696Z,1516420227.696 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2018-01-20T03:50:27.696Z,1516420227.696 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:50:27.721Z,1516420227.721 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:50:28.074Z,1516420228.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:28.133Z,1516420228.133 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:50:28.133Z,1516420228.133 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2018-01-20T03:50:28.475Z,1516420228.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:28.493Z,1516420228.493 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:50:28.494Z,1516420228.494 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:50:28.494Z,1516420228.494 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:50:28.859Z,1516420228.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:29.257Z,1516420229.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:29.663Z,1516420229.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:30.063Z,1516420230.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:30.459Z,1516420230.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:30.866Z,1516420230.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:31.259Z,1516420231.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:31.660Z,1516420231.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:32.082Z,1516420232.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:32.470Z,1516420232.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:32.881Z,1516420232.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:33.285Z,1516420233.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:33.659Z,1516420233.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:34.057Z,1516420234.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:34.463Z,1516420234.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:34.864Z,1516420234.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:35.261Z,1516420235.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:35.663Z,1516420235.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:36.064Z,1516420236.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:36.460Z,1516420236.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:36.875Z,1516420236.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:37.282Z,1516420237.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:37.675Z,1516420237.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:38.076Z,1516420238.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:38.482Z,1516420238.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:38.875Z,1516420238.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:39.266Z,1516420239.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:39.675Z,1516420239.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:40.058Z,1516420240.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:40.463Z,1516420240.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:40.859Z,1516420240.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:41.259Z,1516420241.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:41.682Z,1516420241.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:42.063Z,1516420242.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:42.473Z,1516420242.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:42.885Z,1516420242.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:43.286Z,1516420243.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:43.677Z,1516420243.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:44.063Z,1516420244.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:44.459Z,1516420244.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:44.858Z,1516420244.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:45.263Z,1516420245.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:45.659Z,1516420245.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:46.058Z,1516420246.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:46.463Z,1516420246.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:46.859Z,1516420246.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:47.257Z,1516420247.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:47.693Z,1516420247.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:48.086Z,1516420248.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:48.477Z,1516420248.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:48.882Z,1516420248.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:49.259Z,1516420249.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:49.660Z,1516420249.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:50.063Z,1516420250.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:50.459Z,1516420250.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:50.858Z,1516420250.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:51.271Z,1516420251.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:51.663Z,1516420251.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:52.067Z,1516420252.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:52.463Z,1516420252.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:52.870Z,1516420252.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:56.150Z,1516420256.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:56.279Z,1516420256.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:56.654Z,1516420256.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:57.038Z,1516420257.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:57.438Z,1516420257.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:57.831Z,1516420257.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:58.231Z,1516420258.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:58.642Z,1516420258.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:59.031Z,1516420259.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:59.441Z,1516420259.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:50:59.842Z,1516420259.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:00.231Z,1516420260.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:00.655Z,1516420260.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:01.053Z,1516420261.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:01.451Z,1516420261.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:01.846Z,1516420261.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:02.242Z,1516420262.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:02.631Z,1516420262.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:03.031Z,1516420263.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:03.435Z,1516420263.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:03.831Z,1516420263.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:04.231Z,1516420264.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:04.635Z,1516420264.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:05.031Z,1516420265.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:05.431Z,1516420265.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:05.852Z,1516420265.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:06.258Z,1516420266.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:06.650Z,1516420266.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:07.050Z,1516420267.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:07.431Z,1516420267.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:07.831Z,1516420267.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:08.239Z,1516420268.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:08.635Z,1516420268.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:09.043Z,1516420269.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:09.439Z,1516420269.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:09.836Z,1516420269.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:10.236Z,1516420270.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:10.640Z,1516420270.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:11.046Z,1516420271.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:11.444Z,1516420271.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:11.849Z,1516420271.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:12.253Z,1516420272.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:12.641Z,1516420272.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:13.038Z,1516420273.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:13.445Z,1516420273.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:13.847Z,1516420273.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:14.238Z,1516420274.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:14.648Z,1516420274.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:15.031Z,1516420275.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:15.435Z,1516420275.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:15.835Z,1516420275.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:16.259Z,1516420276.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:16.655Z,1516420276.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:17.056Z,1516420277.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:17.446Z,1516420277.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:17.848Z,1516420277.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:18.245Z,1516420278.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:18.630Z,1516420278.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:19.036Z,1516420279.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:19.441Z,1516420279.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:19.844Z,1516420279.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:20.240Z,1516420280.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:20.643Z,1516420280.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:21.039Z,1516420281.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:21.446Z,1516420281.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:21.850Z,1516420281.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:22.253Z,1516420282.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:22.654Z,1516420282.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:23.038Z,1516420283.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:23.430Z,1516420283.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:23.834Z,1516420283.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:24.248Z,1516420284.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:24.630Z,1516420284.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:25.035Z,1516420285.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:25.440Z,1516420285.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:25.830Z,1516420285.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:26.234Z,1516420286.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:26.650Z,1516420286.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:27.042Z,1516420287.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:27.454Z,1516420287.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:27.850Z,1516420287.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:28.235Z,1516420288.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:28.635Z,1516420288.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:29.039Z,1516420289.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:29.436Z,1516420289.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:29.840Z,1516420289.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:30.244Z,1516420290.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:30.637Z,1516420290.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:31.041Z,1516420291.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:31.440Z,1516420291.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:31.846Z,1516420291.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:32.259Z,1516420292.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:32.645Z,1516420292.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:33.044Z,1516420293.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:33.447Z,1516420293.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:33.840Z,1516420293.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:34.234Z,1516420294.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:34.643Z,1516420294.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:35.040Z,1516420295.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:35.438Z,1516420295.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:35.837Z,1516420295.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:36.247Z,1516420296.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:36.630Z,1516420296.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:37.057Z,1516420297.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:37.458Z,1516420297.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:37.858Z,1516420297.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:38.254Z,1516420298.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:38.631Z,1516420298.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:39.030Z,1516420299.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:39.439Z,1516420299.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:39.831Z,1516420299.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:40.230Z,1516420300.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:40.639Z,1516420300.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:41.031Z,1516420301.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:41.439Z,1516420301.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:41.835Z,1516420301.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:42.242Z,1516420302.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:42.642Z,1516420302.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:43.046Z,1516420303.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:43.442Z,1516420303.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:43.839Z,1516420303.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:44.235Z,1516420304.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:44.631Z,1516420304.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:45.039Z,1516420305.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:45.434Z,1516420305.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:45.835Z,1516420305.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:46.240Z,1516420306.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:46.643Z,1516420306.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:47.035Z,1516420307.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:47.446Z,1516420307.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:47.854Z,1516420307.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:48.258Z,1516420308.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:48.658Z,1516420308.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:49.039Z,1516420309.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:49.448Z,1516420309.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:49.847Z,1516420309.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:50.243Z,1516420310.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:50.640Z,1516420310.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:51.043Z,1516420311.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:51.438Z,1516420311.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:51.840Z,1516420311.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:52.243Z,1516420312.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:52.265Z,1516420312.265 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T03:46:52.2Z
2018-01-20T03:51:52.265Z,1516420312.265 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T03:51:52.265Z,1516420312.265 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T03:51:52.654Z,1516420312.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:53.104Z,1516420313.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:56.318Z,1516420316.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:56.416Z,1516420316.416 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0172.lzma
2018-01-20T03:51:56.466Z,1516420316.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:56.820Z,1516420316.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:57.183Z,1516420317.183 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0172.lzma.bak
2018-01-20T03:51:57.183Z,1516420317.183 [DataOverHttps](INFO): SBD MOMSN=7726119
2018-01-20T03:51:57.224Z,1516420317.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:57.749Z,1516420317.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:51:58.034Z,1516420318.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:01.310Z,1516420321.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:01.450Z,1516420321.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:01.787Z,1516420321.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:02.195Z,1516420322.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:02.605Z,1516420322.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:02.999Z,1516420322.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:06.270Z,1516420326.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:06.377Z,1516420326.377 [DataOverHttps](INFO): Sending 236 bytes from file Logs/20180119T210901/Express0173.lzma
2018-01-20T03:52:06.422Z,1516420326.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:06.755Z,1516420326.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:07.128Z,1516420327.128 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0173.lzma.bak
2018-01-20T03:52:07.128Z,1516420327.128 [DataOverHttps](INFO): SBD MOMSN=7726121
2018-01-20T03:52:07.168Z,1516420327.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:07.761Z,1516420327.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:07.822Z,1516420327.822 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T03:52:07.822Z,1516420327.822 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T03:52:07.823Z,1516420327.823 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T03:52:07.970Z,1516420327.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:11.214Z,1516420331.214 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T03:52:11.232Z,1516420331.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:11.356Z,1516420331.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:11.748Z,1516420331.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:12.151Z,1516420332.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:12.538Z,1516420332.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:12.945Z,1516420332.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:13.351Z,1516420333.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:13.744Z,1516420333.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:14.142Z,1516420334.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:14.542Z,1516420334.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:14.951Z,1516420334.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:15.354Z,1516420335.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:15.742Z,1516420335.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:16.150Z,1516420336.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:16.541Z,1516420336.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:16.951Z,1516420336.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:17.336Z,1516420337.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:17.742Z,1516420337.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:18.148Z,1516420338.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:18.536Z,1516420338.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:18.942Z,1516420338.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:19.335Z,1516420339.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:19.746Z,1516420339.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:20.155Z,1516420340.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:20.541Z,1516420340.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:20.935Z,1516420340.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:21.341Z,1516420341.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:21.739Z,1516420341.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:22.139Z,1516420342.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:22.555Z,1516420342.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:22.948Z,1516420342.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:23.343Z,1516420343.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:23.751Z,1516420343.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:24.146Z,1516420344.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:24.546Z,1516420344.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:24.947Z,1516420344.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:25.346Z,1516420345.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:25.746Z,1516420345.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:26.151Z,1516420346.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:26.551Z,1516420346.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:26.947Z,1516420346.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:27.346Z,1516420347.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:27.748Z,1516420347.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:28.146Z,1516420348.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:28.552Z,1516420348.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:28.947Z,1516420348.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:29.337Z,1516420349.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:29.753Z,1516420349.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:30.148Z,1516420350.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:30.536Z,1516420350.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:30.953Z,1516420350.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:31.341Z,1516420351.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:31.738Z,1516420351.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:32.155Z,1516420352.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:32.535Z,1516420352.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:32.954Z,1516420352.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:32.961Z,1516420352.961 [PNI_TCM](ERROR): CRC does not match. Expected:0x11572 got:0x65102
2018-01-20T03:52:33.343Z,1516420353.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:33.739Z,1516420353.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:34.144Z,1516420354.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:34.540Z,1516420354.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:34.944Z,1516420354.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:35.338Z,1516420355.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:35.739Z,1516420355.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:36.136Z,1516420356.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:36.144Z,1516420356.144 [PNI_TCM](ERROR): CRC does not match. Expected:0x38137 got:0x52764
2018-01-20T03:52:36.538Z,1516420356.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:36.949Z,1516420356.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:37.348Z,1516420357.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:37.742Z,1516420357.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:38.151Z,1516420358.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:38.548Z,1516420358.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:38.944Z,1516420358.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:39.350Z,1516420359.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:39.356Z,1516420359.356 [PNI_TCM](ERROR): CRC does not match. Expected:0x56031 got:0x18870
2018-01-20T03:52:39.746Z,1516420359.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:40.142Z,1516420360.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:40.543Z,1516420360.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:40.945Z,1516420360.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:40.953Z,1516420360.953 [PNI_TCM](ERROR): CRC does not match. Expected:0x30379 got:0x3283
2018-01-20T03:52:41.347Z,1516420361.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:41.722Z,1516420361.722 [NAL9602](INFO): Powering down
2018-01-20T03:52:41.750Z,1516420361.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:42.142Z,1516420362.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:42.543Z,1516420362.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:42.943Z,1516420362.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:43.337Z,1516420363.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:43.736Z,1516420363.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:44.142Z,1516420364.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:44.535Z,1516420364.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:44.945Z,1516420364.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:44.962Z,1516420364.962 [PNI_TCM](ERROR): CRC does not match. Expected:0x64153 got:0x46912
2018-01-20T03:52:45.342Z,1516420365.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:45.735Z,1516420365.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:46.145Z,1516420366.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:46.541Z,1516420366.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:46.939Z,1516420366.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:47.332Z,1516420367.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:47.738Z,1516420367.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:48.144Z,1516420368.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:48.532Z,1516420368.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:48.939Z,1516420368.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:49.344Z,1516420369.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:49.732Z,1516420369.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:50.138Z,1516420370.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:50.542Z,1516420370.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:50.942Z,1516420370.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:51.348Z,1516420371.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:51.746Z,1516420371.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:52.146Z,1516420372.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:52.546Z,1516420372.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:52.941Z,1516420372.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:53.340Z,1516420373.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:53.744Z,1516420373.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:54.147Z,1516420374.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:54.552Z,1516420374.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:54.942Z,1516420374.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:55.344Z,1516420375.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:55.739Z,1516420375.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:56.148Z,1516420376.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:56.542Z,1516420376.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:56.949Z,1516420376.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:57.342Z,1516420377.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:57.753Z,1516420377.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:58.150Z,1516420378.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:58.547Z,1516420378.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:58.947Z,1516420378.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:59.332Z,1516420379.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:52:59.734Z,1516420379.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:00.146Z,1516420380.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:00.535Z,1516420380.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:00.947Z,1516420380.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:01.342Z,1516420381.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:01.732Z,1516420381.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:02.134Z,1516420382.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:02.539Z,1516420382.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:02.935Z,1516420382.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:03.338Z,1516420383.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:03.743Z,1516420383.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:04.142Z,1516420384.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:04.534Z,1516420384.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:04.939Z,1516420384.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:05.336Z,1516420385.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:05.746Z,1516420385.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:06.143Z,1516420386.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:06.535Z,1516420386.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:06.935Z,1516420386.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:07.340Z,1516420387.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:07.745Z,1516420387.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:08.145Z,1516420388.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:08.549Z,1516420388.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:11.810Z,1516420391.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:11.937Z,1516420391.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:12.302Z,1516420392.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:12.699Z,1516420392.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:13.098Z,1516420393.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:13.507Z,1516420393.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:13.902Z,1516420393.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:14.288Z,1516420394.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:14.703Z,1516420394.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:15.087Z,1516420395.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:15.488Z,1516420395.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:15.894Z,1516420395.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:16.287Z,1516420396.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:16.684Z,1516420396.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:17.103Z,1516420397.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:17.487Z,1516420397.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:17.887Z,1516420397.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:18.311Z,1516420398.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:18.691Z,1516420398.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:19.088Z,1516420399.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:19.491Z,1516420399.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:19.887Z,1516420399.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:20.288Z,1516420400.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:20.695Z,1516420400.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:21.091Z,1516420401.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:21.493Z,1516420401.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:21.956Z,1516420401.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:22.300Z,1516420402.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:22.703Z,1516420402.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:23.112Z,1516420403.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:23.501Z,1516420403.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:23.900Z,1516420403.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:24.303Z,1516420404.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:24.698Z,1516420404.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:25.123Z,1516420405.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:25.492Z,1516420405.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:25.892Z,1516420405.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:26.292Z,1516420406.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:26.692Z,1516420406.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:27.105Z,1516420407.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:27.501Z,1516420407.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:27.892Z,1516420407.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:28.292Z,1516420408.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:28.692Z,1516420408.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:28.746Z,1516420408.746 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:53:28.746Z,1516420408.746 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2018-01-20T03:53:28.746Z,1516420408.746 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:53:28.784Z,1516420408.784 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:53:29.091Z,1516420409.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:29.176Z,1516420409.176 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:53:29.176Z,1516420409.176 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2018-01-20T03:53:29.492Z,1516420409.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:29.545Z,1516420409.545 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:53:29.545Z,1516420409.545 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:53:29.546Z,1516420409.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:53:29.896Z,1516420409.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:30.313Z,1516420410.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:30.700Z,1516420410.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:31.101Z,1516420411.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:31.492Z,1516420411.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:31.892Z,1516420411.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:32.292Z,1516420412.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:32.723Z,1516420412.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:33.092Z,1516420413.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:33.500Z,1516420413.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:33.890Z,1516420413.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:34.287Z,1516420414.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:34.688Z,1516420414.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:35.090Z,1516420415.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:35.494Z,1516420415.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:35.901Z,1516420415.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:36.294Z,1516420416.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:36.694Z,1516420416.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:37.091Z,1516420417.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:37.495Z,1516420417.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:37.893Z,1516420417.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:38.295Z,1516420418.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:38.697Z,1516420418.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:39.094Z,1516420419.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:39.495Z,1516420419.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:39.899Z,1516420419.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:40.301Z,1516420420.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:40.696Z,1516420420.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:41.101Z,1516420421.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:41.501Z,1516420421.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:41.899Z,1516420421.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:42.298Z,1516420422.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:42.694Z,1516420422.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:43.095Z,1516420423.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:43.498Z,1516420423.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:43.898Z,1516420423.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:44.294Z,1516420424.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:44.699Z,1516420424.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:45.098Z,1516420425.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:45.494Z,1516420425.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:45.901Z,1516420425.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:46.298Z,1516420426.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:46.695Z,1516420426.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:47.098Z,1516420427.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:47.502Z,1516420427.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:47.898Z,1516420427.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:48.298Z,1516420428.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:48.698Z,1516420428.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:49.096Z,1516420429.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:49.503Z,1516420429.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:49.903Z,1516420429.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:50.295Z,1516420430.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:50.698Z,1516420430.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:51.103Z,1516420431.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:51.496Z,1516420431.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:51.898Z,1516420431.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:52.297Z,1516420432.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:52.696Z,1516420432.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:53.098Z,1516420433.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:53.503Z,1516420433.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:53.894Z,1516420433.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:54.305Z,1516420434.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:54.697Z,1516420434.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:55.088Z,1516420435.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:55.494Z,1516420435.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:55.895Z,1516420435.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:56.288Z,1516420436.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:56.694Z,1516420436.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:57.095Z,1516420437.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:57.492Z,1516420437.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:57.891Z,1516420437.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:58.298Z,1516420438.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:58.696Z,1516420438.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:59.098Z,1516420439.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:59.499Z,1516420439.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:53:59.899Z,1516420439.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:00.294Z,1516420440.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:00.696Z,1516420440.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:01.099Z,1516420441.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:01.501Z,1516420441.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:01.903Z,1516420441.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:02.305Z,1516420442.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:02.703Z,1516420442.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:03.104Z,1516420443.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:03.498Z,1516420443.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:03.900Z,1516420443.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:04.298Z,1516420444.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:04.698Z,1516420444.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:05.099Z,1516420445.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:05.506Z,1516420445.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:05.901Z,1516420445.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:06.307Z,1516420446.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:06.703Z,1516420446.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:07.098Z,1516420447.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:07.501Z,1516420447.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:07.900Z,1516420447.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:08.299Z,1516420448.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:08.703Z,1516420448.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:11.973Z,1516420451.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:12.097Z,1516420452.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:12.470Z,1516420452.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:12.875Z,1516420452.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:13.266Z,1516420453.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:13.673Z,1516420453.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:14.073Z,1516420454.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:14.473Z,1516420454.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:14.872Z,1516420454.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:15.274Z,1516420455.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:15.671Z,1516420455.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:16.069Z,1516420456.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:16.479Z,1516420456.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:16.875Z,1516420456.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:17.277Z,1516420457.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:17.680Z,1516420457.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:18.070Z,1516420458.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:18.485Z,1516420458.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:18.880Z,1516420458.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:19.263Z,1516420459.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:19.675Z,1516420459.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:20.070Z,1516420460.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:20.463Z,1516420460.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:20.870Z,1516420460.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:21.267Z,1516420461.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:21.663Z,1516420461.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:22.066Z,1516420462.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:22.471Z,1516420462.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:22.871Z,1516420462.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:23.275Z,1516420463.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:23.674Z,1516420463.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:24.071Z,1516420464.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:24.476Z,1516420464.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:24.868Z,1516420464.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:25.271Z,1516420465.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:25.677Z,1516420465.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:26.072Z,1516420466.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:26.470Z,1516420466.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:26.875Z,1516420466.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:27.271Z,1516420467.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:27.670Z,1516420467.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:28.074Z,1516420468.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:28.470Z,1516420468.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:28.870Z,1516420468.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:29.270Z,1516420469.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:29.668Z,1516420469.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:30.074Z,1516420470.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:30.478Z,1516420470.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:30.870Z,1516420470.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:31.270Z,1516420471.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:31.671Z,1516420471.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:32.070Z,1516420472.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:32.470Z,1516420472.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:32.870Z,1516420472.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:33.270Z,1516420473.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:33.670Z,1516420473.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:34.074Z,1516420474.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:34.460Z,1516420474.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:34.879Z,1516420474.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:35.274Z,1516420475.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:35.672Z,1516420475.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:36.070Z,1516420476.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:36.470Z,1516420476.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:36.875Z,1516420476.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:37.270Z,1516420477.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:37.674Z,1516420477.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:38.079Z,1516420478.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:38.478Z,1516420478.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:38.870Z,1516420478.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:39.272Z,1516420479.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:39.670Z,1516420479.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:40.075Z,1516420480.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:40.470Z,1516420480.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:40.870Z,1516420480.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:41.271Z,1516420481.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:41.672Z,1516420481.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:42.071Z,1516420482.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:42.470Z,1516420482.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:42.870Z,1516420482.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:43.279Z,1516420483.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:43.671Z,1516420483.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:44.078Z,1516420484.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:44.479Z,1516420484.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:44.874Z,1516420484.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:45.272Z,1516420485.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:45.675Z,1516420485.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:46.071Z,1516420486.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:46.472Z,1516420486.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:46.875Z,1516420486.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:47.284Z,1516420487.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:47.660Z,1516420487.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:48.075Z,1516420488.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:48.474Z,1516420488.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:48.870Z,1516420488.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:49.273Z,1516420489.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:49.673Z,1516420489.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:50.070Z,1516420490.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:50.470Z,1516420490.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:50.879Z,1516420490.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:51.272Z,1516420491.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:51.670Z,1516420491.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:52.079Z,1516420492.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:52.464Z,1516420492.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:52.871Z,1516420492.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:53.267Z,1516420493.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:53.673Z,1516420493.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:54.072Z,1516420494.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:54.473Z,1516420494.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:54.871Z,1516420494.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:55.285Z,1516420495.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:55.670Z,1516420495.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:56.080Z,1516420496.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:56.479Z,1516420496.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:56.868Z,1516420496.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:57.268Z,1516420497.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:57.680Z,1516420497.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:58.067Z,1516420498.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:58.463Z,1516420498.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:58.880Z,1516420498.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:59.267Z,1516420499.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:54:59.663Z,1516420499.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:00.079Z,1516420500.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:00.467Z,1516420500.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:00.871Z,1516420500.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:01.267Z,1516420501.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:01.666Z,1516420501.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:02.067Z,1516420502.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:02.468Z,1516420502.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:02.871Z,1516420502.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:03.268Z,1516420503.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:03.673Z,1516420503.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:04.075Z,1516420504.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:04.472Z,1516420504.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:04.871Z,1516420504.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:05.274Z,1516420505.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:05.679Z,1516420505.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:06.070Z,1516420506.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:06.470Z,1516420506.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:06.863Z,1516420506.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:07.263Z,1516420507.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:07.666Z,1516420507.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:08.063Z,1516420508.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:08.463Z,1516420508.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:08.868Z,1516420508.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:12.139Z,1516420512.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:12.263Z,1516420512.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:12.608Z,1516420512.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:13.016Z,1516420513.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:13.404Z,1516420513.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:13.811Z,1516420513.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:14.209Z,1516420514.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:14.609Z,1516420514.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:15.009Z,1516420515.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:15.412Z,1516420515.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:15.811Z,1516420515.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:16.206Z,1516420516.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:16.608Z,1516420516.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:17.006Z,1516420517.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:17.416Z,1516420517.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:17.799Z,1516420517.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:18.215Z,1516420518.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:18.606Z,1516420518.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:19.014Z,1516420519.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:19.400Z,1516420519.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:19.807Z,1516420519.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:20.206Z,1516420520.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:20.600Z,1516420520.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:21.007Z,1516420521.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:21.400Z,1516420521.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:21.799Z,1516420521.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:22.203Z,1516420522.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:22.610Z,1516420522.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:23.006Z,1516420523.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:23.405Z,1516420523.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:23.813Z,1516420523.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:24.213Z,1516420524.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:24.606Z,1516420524.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:25.006Z,1516420525.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:25.403Z,1516420525.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:25.806Z,1516420525.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:26.206Z,1516420526.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:26.596Z,1516420526.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:27.015Z,1516420527.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:27.410Z,1516420527.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:27.799Z,1516420527.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:28.206Z,1516420528.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:28.614Z,1516420528.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:29.014Z,1516420529.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:29.403Z,1516420529.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:29.803Z,1516420529.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:30.214Z,1516420530.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:30.603Z,1516420530.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:30.999Z,1516420530.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:31.399Z,1516420531.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:31.803Z,1516420531.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:32.199Z,1516420532.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:32.600Z,1516420532.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:33.003Z,1516420533.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:33.399Z,1516420533.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:33.809Z,1516420533.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:34.203Z,1516420534.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:34.606Z,1516420534.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:35.006Z,1516420535.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:35.403Z,1516420535.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:35.807Z,1516420535.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:36.207Z,1516420536.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:36.611Z,1516420536.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:37.009Z,1516420537.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:37.407Z,1516420537.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:37.806Z,1516420537.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:38.207Z,1516420538.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:38.604Z,1516420538.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:39.007Z,1516420539.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:39.406Z,1516420539.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:39.810Z,1516420539.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:40.209Z,1516420540.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:40.614Z,1516420540.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:41.014Z,1516420541.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:41.409Z,1516420541.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:41.806Z,1516420541.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:42.213Z,1516420542.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:42.609Z,1516420542.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:43.006Z,1516420543.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:43.404Z,1516420543.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:43.806Z,1516420543.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:44.215Z,1516420544.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:44.608Z,1516420544.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:45.006Z,1516420545.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:45.415Z,1516420545.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:45.815Z,1516420545.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:46.215Z,1516420546.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:46.613Z,1516420546.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:47.016Z,1516420547.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:47.406Z,1516420547.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:47.799Z,1516420547.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:48.211Z,1516420548.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:48.623Z,1516420548.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:49.015Z,1516420549.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:49.416Z,1516420549.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:49.806Z,1516420549.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:50.207Z,1516420550.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:50.600Z,1516420550.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:51.003Z,1516420551.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:51.399Z,1516420551.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:51.806Z,1516420551.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:52.215Z,1516420552.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:52.608Z,1516420552.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:53.010Z,1516420553.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:53.411Z,1516420553.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:53.810Z,1516420553.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:54.207Z,1516420554.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:54.609Z,1516420554.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:55.011Z,1516420555.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:55.408Z,1516420555.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:55.807Z,1516420555.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:56.207Z,1516420556.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:56.608Z,1516420556.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:57.007Z,1516420557.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:57.411Z,1516420557.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:57.806Z,1516420557.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:58.206Z,1516420558.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:58.610Z,1516420558.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:59.014Z,1516420559.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:59.409Z,1516420559.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:55:59.815Z,1516420559.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:00.214Z,1516420560.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:00.610Z,1516420560.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:01.010Z,1516420561.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:01.406Z,1516420561.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:01.820Z,1516420561.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:02.206Z,1516420562.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:02.611Z,1516420562.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:03.011Z,1516420563.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:03.414Z,1516420563.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:03.814Z,1516420563.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:04.206Z,1516420564.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:04.599Z,1516420564.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:04.999Z,1516420564.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:05.398Z,1516420565.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:05.803Z,1516420565.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:06.199Z,1516420566.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:06.614Z,1516420566.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:07.014Z,1516420567.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:07.400Z,1516420567.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:07.802Z,1516420567.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:08.199Z,1516420568.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:08.599Z,1516420568.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:09.003Z,1516420569.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:12.277Z,1516420572.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:12.388Z,1516420572.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:12.747Z,1516420572.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:13.143Z,1516420573.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:13.539Z,1516420573.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:13.943Z,1516420573.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:14.350Z,1516420574.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:14.744Z,1516420574.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:15.146Z,1516420575.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:15.535Z,1516420575.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:15.935Z,1516420575.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:16.346Z,1516420576.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:16.735Z,1516420576.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:17.135Z,1516420577.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:17.534Z,1516420577.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:17.935Z,1516420577.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:18.332Z,1516420578.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:18.742Z,1516420578.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:19.142Z,1516420579.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:19.536Z,1516420579.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:19.934Z,1516420579.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:20.343Z,1516420580.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:20.739Z,1516420580.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:21.154Z,1516420581.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:21.542Z,1516420581.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:21.943Z,1516420581.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:22.346Z,1516420582.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:22.749Z,1516420582.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:23.139Z,1516420583.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:23.556Z,1516420583.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:23.943Z,1516420583.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:24.335Z,1516420584.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:24.734Z,1516420584.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:25.135Z,1516420585.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:25.535Z,1516420585.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:25.943Z,1516420585.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:26.335Z,1516420586.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:26.734Z,1516420586.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:27.134Z,1516420587.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:27.546Z,1516420587.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:27.935Z,1516420587.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:28.346Z,1516420588.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:28.750Z,1516420588.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:29.135Z,1516420589.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:29.534Z,1516420589.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:29.572Z,1516420589.572 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:56:29.572Z,1516420589.572 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2018-01-20T03:56:29.572Z,1516420589.572 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:56:29.584Z,1516420589.584 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:56:29.951Z,1516420589.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:29.980Z,1516420589.980 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:56:29.980Z,1516420589.980 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2018-01-20T03:56:30.332Z,1516420590.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:30.363Z,1516420590.363 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:56:30.363Z,1516420590.363 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:56:30.363Z,1516420590.363 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:56:30.734Z,1516420590.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:31.143Z,1516420591.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:31.536Z,1516420591.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:31.938Z,1516420591.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:32.343Z,1516420592.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:32.739Z,1516420592.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:33.150Z,1516420593.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:33.544Z,1516420593.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:33.947Z,1516420593.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:34.346Z,1516420594.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:34.751Z,1516420594.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:35.135Z,1516420595.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:35.547Z,1516420595.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:35.951Z,1516420595.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:36.335Z,1516420596.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:36.734Z,1516420596.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:37.150Z,1516420597.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:37.535Z,1516420597.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:37.947Z,1516420597.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:38.349Z,1516420598.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:38.735Z,1516420598.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:39.135Z,1516420599.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:39.548Z,1516420599.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:39.947Z,1516420599.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:40.342Z,1516420600.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:40.752Z,1516420600.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:41.139Z,1516420601.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:41.535Z,1516420601.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:41.940Z,1516420601.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:42.343Z,1516420602.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:42.739Z,1516420602.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:43.139Z,1516420603.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:43.544Z,1516420603.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:43.945Z,1516420603.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:44.344Z,1516420604.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:44.742Z,1516420604.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:45.144Z,1516420605.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:45.548Z,1516420605.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:45.943Z,1516420605.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:46.348Z,1516420606.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:46.741Z,1516420606.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:47.135Z,1516420607.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:47.543Z,1516420607.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:47.944Z,1516420607.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:48.335Z,1516420608.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:48.734Z,1516420608.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:49.136Z,1516420609.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:49.550Z,1516420609.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:49.948Z,1516420609.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:50.340Z,1516420610.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:50.746Z,1516420610.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:51.146Z,1516420611.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:51.532Z,1516420611.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:51.946Z,1516420611.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:52.358Z,1516420612.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:52.732Z,1516420612.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:53.135Z,1516420613.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:53.547Z,1516420613.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:53.951Z,1516420613.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:54.335Z,1516420614.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:54.739Z,1516420614.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:55.135Z,1516420615.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:55.535Z,1516420615.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:55.934Z,1516420615.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:56.332Z,1516420616.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:56.743Z,1516420616.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:57.146Z,1516420617.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:57.539Z,1516420617.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:57.942Z,1516420617.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:58.342Z,1516420618.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:58.742Z,1516420618.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:59.142Z,1516420619.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:59.546Z,1516420619.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:56:59.943Z,1516420619.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:00.342Z,1516420620.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:00.746Z,1516420620.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:01.142Z,1516420621.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:01.542Z,1516420621.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:01.947Z,1516420621.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:02.342Z,1516420622.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:02.746Z,1516420622.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:03.134Z,1516420623.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:03.532Z,1516420623.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:03.935Z,1516420623.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:04.347Z,1516420624.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:04.736Z,1516420624.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:05.135Z,1516420625.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:05.534Z,1516420625.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:05.935Z,1516420625.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:06.350Z,1516420626.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:06.746Z,1516420626.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:07.135Z,1516420627.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:07.546Z,1516420627.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:07.954Z,1516420627.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:08.335Z,1516420628.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:08.366Z,1516420628.366 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T03:57:08.366Z,1516420628.366 [Default:CheckIn:C.Wait] Stopped
2018-01-20T03:57:08.366Z,1516420628.366 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T03:57:08.367Z,1516420628.367 [Default:CheckIn:D] Running Loop=1
2018-01-20T03:57:08.739Z,1516420628.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:08.778Z,1516420628.778 [Default:CheckIn:D] Stopped
2018-01-20T03:57:08.778Z,1516420628.778 [Default:CheckIn:E] Running Loop=1
2018-01-20T03:57:09.139Z,1516420629.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:09.178Z,1516420629.178 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 113.535864 min 
2018-01-20T03:57:09.178Z,1516420629.178 [Default:CheckIn:E] Stopped
2018-01-20T03:57:09.178Z,1516420629.178 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T03:57:09.178Z,1516420629.178 [Default:CheckIn] Stopped
2018-01-20T03:57:09.178Z,1516420629.178 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T03:57:09.178Z,1516420629.178 [Default:CheckIn](INFO): Running loop #12
2018-01-20T03:57:09.179Z,1516420629.179 [Default:CheckIn] Running Loop=12
2018-01-20T03:57:09.179Z,1516420629.179 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T03:57:09.179Z,1516420629.179 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T03:57:12.423Z,1516420632.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:12.518Z,1516420632.518 [NAL9602](INFO): Powering up
2018-01-20T03:57:12.536Z,1516420632.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:12.928Z,1516420632.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:13.319Z,1516420633.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:13.719Z,1516420633.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:14.118Z,1516420634.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:14.512Z,1516420634.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:14.922Z,1516420634.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:15.318Z,1516420635.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:15.715Z,1516420635.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:16.122Z,1516420636.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:16.519Z,1516420636.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:16.919Z,1516420636.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:17.314Z,1516420637.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:17.718Z,1516420637.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:18.112Z,1516420638.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:18.514Z,1516420638.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:18.918Z,1516420638.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:19.316Z,1516420639.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:19.725Z,1516420639.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:20.130Z,1516420640.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:20.520Z,1516420640.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:20.927Z,1516420640.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:21.325Z,1516420641.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:21.722Z,1516420641.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:22.122Z,1516420642.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:22.525Z,1516420642.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:22.922Z,1516420642.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:23.330Z,1516420643.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:23.702Z,1516420643.702 [NAL9602](INFO): NAL9602 initialized
2018-01-20T03:57:23.731Z,1516420643.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:24.126Z,1516420644.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:24.506Z,1516420644.506 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T03:57:24.506Z,1516420644.506 [NAL9602] Data Fault, FailCount= 2
2018-01-20T03:57:24.506Z,1516420644.506 [NAL9602](ERROR): Data Fault
2018-01-20T03:57:24.550Z,1516420644.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:24.603Z,1516420644.603 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T03:57:24.902Z,1516420644.902 [NAL9602](INFO): Powering down
2018-01-20T03:57:24.930Z,1516420644.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:25.316Z,1516420645.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:25.731Z,1516420645.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:25.762Z,1516420645.762 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T03:57:25.762Z,1516420645.762 [NAL9602] No Fault, FailCount= 2
2018-01-20T03:57:26.119Z,1516420646.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:26.512Z,1516420646.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:26.919Z,1516420646.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:27.322Z,1516420647.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:27.716Z,1516420647.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:28.119Z,1516420648.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:28.523Z,1516420648.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:28.921Z,1516420648.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:29.323Z,1516420649.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:29.725Z,1516420649.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:30.122Z,1516420650.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:30.525Z,1516420650.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:30.922Z,1516420650.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:31.322Z,1516420651.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:31.722Z,1516420651.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:32.135Z,1516420652.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:32.519Z,1516420652.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:32.922Z,1516420652.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:33.322Z,1516420653.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:33.712Z,1516420653.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:34.131Z,1516420654.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:34.522Z,1516420654.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:34.931Z,1516420654.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:35.331Z,1516420655.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:35.719Z,1516420655.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:36.119Z,1516420656.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:36.519Z,1516420656.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:36.919Z,1516420656.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:37.312Z,1516420657.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:37.730Z,1516420657.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:38.119Z,1516420658.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:38.519Z,1516420658.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:38.920Z,1516420658.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:39.319Z,1516420659.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:39.717Z,1516420659.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:40.120Z,1516420660.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:40.519Z,1516420660.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:40.918Z,1516420660.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:41.323Z,1516420661.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:41.724Z,1516420661.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:42.126Z,1516420662.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:42.527Z,1516420662.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:42.927Z,1516420662.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:43.330Z,1516420663.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:43.724Z,1516420663.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:44.133Z,1516420664.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:44.527Z,1516420664.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:44.926Z,1516420664.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:45.326Z,1516420665.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:45.715Z,1516420665.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:46.126Z,1516420666.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:46.522Z,1516420666.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:46.926Z,1516420666.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:47.314Z,1516420667.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:47.719Z,1516420667.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:48.119Z,1516420668.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:48.512Z,1516420668.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:48.919Z,1516420668.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:49.315Z,1516420669.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:49.716Z,1516420669.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:50.127Z,1516420670.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:50.526Z,1516420670.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:50.923Z,1516420670.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:51.323Z,1516420671.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:51.722Z,1516420671.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:52.122Z,1516420672.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:52.536Z,1516420672.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:52.926Z,1516420672.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:53.326Z,1516420673.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:53.725Z,1516420673.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:54.122Z,1516420674.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:54.524Z,1516420674.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:54.921Z,1516420674.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:55.298Z,1516420675.298 [NAL9602](INFO): Powering up NAL9602
2018-01-20T03:57:55.331Z,1516420675.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:55.722Z,1516420675.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:56.122Z,1516420676.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:56.530Z,1516420676.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:56.930Z,1516420676.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:57.322Z,1516420677.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:57.726Z,1516420677.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:58.116Z,1516420678.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:58.522Z,1516420678.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:58.930Z,1516420678.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:59.316Z,1516420679.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:57:59.731Z,1516420679.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:00.118Z,1516420680.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:00.516Z,1516420680.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:00.923Z,1516420680.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:01.314Z,1516420681.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:01.716Z,1516420681.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:02.119Z,1516420682.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:02.515Z,1516420682.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:02.916Z,1516420682.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:03.319Z,1516420683.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:03.722Z,1516420683.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:04.119Z,1516420684.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:04.523Z,1516420684.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:04.927Z,1516420684.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:05.319Z,1516420685.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:05.723Z,1516420685.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:06.134Z,1516420686.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:06.498Z,1516420686.498 [NAL9602](INFO): NAL9602 initialized
2018-01-20T03:58:06.529Z,1516420686.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:06.927Z,1516420686.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:07.337Z,1516420687.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:07.738Z,1516420687.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:08.138Z,1516420688.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:08.531Z,1516420688.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:08.927Z,1516420688.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:09.337Z,1516420689.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:12.602Z,1516420692.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:12.740Z,1516420692.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:13.104Z,1516420693.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:13.505Z,1516420693.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:13.909Z,1516420693.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:14.313Z,1516420694.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:14.712Z,1516420694.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:15.117Z,1516420695.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:15.503Z,1516420695.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:15.895Z,1516420695.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:16.291Z,1516420696.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:16.695Z,1516420696.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:17.095Z,1516420697.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:17.499Z,1516420697.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:17.902Z,1516420697.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:18.295Z,1516420698.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:18.702Z,1516420698.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:19.114Z,1516420699.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:19.514Z,1516420699.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:19.918Z,1516420699.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:20.310Z,1516420700.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:20.707Z,1516420700.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:21.103Z,1516420701.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:21.499Z,1516420701.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:21.904Z,1516420701.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:22.303Z,1516420702.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:22.712Z,1516420702.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:23.094Z,1516420703.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:23.508Z,1516420703.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:23.908Z,1516420703.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:24.314Z,1516420704.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:24.713Z,1516420704.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:25.115Z,1516420705.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:25.514Z,1516420705.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:25.895Z,1516420705.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:26.295Z,1516420706.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:26.693Z,1516420706.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:27.100Z,1516420707.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:27.499Z,1516420707.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:27.899Z,1516420707.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:28.305Z,1516420708.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:28.703Z,1516420708.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:29.101Z,1516420709.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:29.518Z,1516420709.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:29.914Z,1516420709.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:30.311Z,1516420710.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:30.712Z,1516420710.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:31.112Z,1516420711.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:31.493Z,1516420711.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:31.893Z,1516420711.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:32.297Z,1516420712.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:32.699Z,1516420712.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:33.096Z,1516420713.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:33.497Z,1516420713.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:33.900Z,1516420713.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:34.303Z,1516420714.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:34.748Z,1516420714.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:35.116Z,1516420715.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:35.520Z,1516420715.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:35.919Z,1516420715.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:36.300Z,1516420716.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:36.700Z,1516420716.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:37.111Z,1516420717.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:37.527Z,1516420717.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:37.916Z,1516420717.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:38.300Z,1516420718.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:38.704Z,1516420718.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:39.113Z,1516420719.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:39.507Z,1516420719.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:39.911Z,1516420719.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:40.317Z,1516420720.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:40.719Z,1516420720.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:41.109Z,1516420721.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:41.506Z,1516420721.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:41.908Z,1516420721.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:42.309Z,1516420722.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:42.705Z,1516420722.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:43.110Z,1516420723.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:43.116Z,1516420723.116 [PNI_TCM](ERROR): CRC does not match. Expected:0x62390 got:0x59933
2018-01-20T03:58:43.508Z,1516420723.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:43.917Z,1516420723.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:44.296Z,1516420724.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:44.697Z,1516420724.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:45.110Z,1516420725.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:45.519Z,1516420725.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:45.908Z,1516420725.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:46.314Z,1516420726.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:46.320Z,1516420726.320 [PNI_TCM](ERROR): CRC does not match. Expected:0x10392 got:0x42522
2018-01-20T03:58:46.709Z,1516420726.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:47.100Z,1516420727.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:47.491Z,1516420727.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:47.895Z,1516420727.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:48.291Z,1516420728.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:48.693Z,1516420728.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:49.099Z,1516420729.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:49.498Z,1516420729.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:49.899Z,1516420729.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:50.333Z,1516420730.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:50.702Z,1516420730.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:51.102Z,1516420731.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:51.519Z,1516420731.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:51.906Z,1516420731.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:52.302Z,1516420732.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:52.699Z,1516420732.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:53.099Z,1516420733.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:53.500Z,1516420733.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:53.899Z,1516420733.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:54.306Z,1516420734.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:54.708Z,1516420734.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:55.104Z,1516420735.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:55.513Z,1516420735.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:55.910Z,1516420735.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:56.312Z,1516420736.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:56.717Z,1516420736.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:57.100Z,1516420737.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:57.507Z,1516420737.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:57.900Z,1516420737.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:58.299Z,1516420738.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:58.703Z,1516420738.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:59.104Z,1516420739.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:59.504Z,1516420739.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:58:59.901Z,1516420739.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:00.301Z,1516420740.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:00.717Z,1516420740.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:01.114Z,1516420741.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:01.515Z,1516420741.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:01.910Z,1516420741.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:02.299Z,1516420742.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:02.695Z,1516420742.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:03.108Z,1516420743.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:03.499Z,1516420743.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:03.959Z,1516420743.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:04.292Z,1516420744.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:04.696Z,1516420744.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:05.097Z,1516420745.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:05.499Z,1516420745.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:05.910Z,1516420745.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:06.306Z,1516420746.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:06.706Z,1516420746.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:07.106Z,1516420747.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:07.495Z,1516420747.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:07.895Z,1516420747.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:08.298Z,1516420748.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:08.703Z,1516420748.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:09.107Z,1516420749.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:09.502Z,1516420749.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:12.792Z,1516420752.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:12.918Z,1516420752.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:13.298Z,1516420753.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:13.698Z,1516420753.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:14.086Z,1516420754.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:14.491Z,1516420754.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:14.895Z,1516420754.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:15.279Z,1516420755.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:15.679Z,1516420755.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:16.095Z,1516420756.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:16.479Z,1516420756.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:16.895Z,1516420756.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:17.295Z,1516420757.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:17.698Z,1516420757.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:18.102Z,1516420758.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:18.496Z,1516420758.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:18.906Z,1516420758.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:19.283Z,1516420759.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:19.694Z,1516420759.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:20.079Z,1516420760.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:20.479Z,1516420760.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:20.883Z,1516420760.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:21.279Z,1516420761.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:21.683Z,1516420761.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:22.095Z,1516420762.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:22.479Z,1516420762.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:22.902Z,1516420762.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:23.302Z,1516420763.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:23.696Z,1516420763.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:24.102Z,1516420764.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:24.171Z,1516420764.171 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T03:59:24.495Z,1516420764.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:24.879Z,1516420764.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:25.279Z,1516420765.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:25.683Z,1516420765.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:26.079Z,1516420766.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:26.486Z,1516420766.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:26.887Z,1516420766.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:27.302Z,1516420767.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:27.683Z,1516420767.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:28.106Z,1516420768.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:28.490Z,1516420768.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:28.893Z,1516420768.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:29.306Z,1516420769.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:29.683Z,1516420769.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:30.079Z,1516420770.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:30.491Z,1516420770.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:30.532Z,1516420770.532 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T03:59:30.532Z,1516420770.532 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2018-01-20T03:59:30.532Z,1516420770.532 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T03:59:30.545Z,1516420770.545 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T03:59:30.895Z,1516420770.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:30.957Z,1516420770.957 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T03:59:30.957Z,1516420770.957 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2018-01-20T03:59:31.291Z,1516420771.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:31.336Z,1516420771.336 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T03:59:31.337Z,1516420771.337 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T03:59:31.337Z,1516420771.337 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T03:59:31.687Z,1516420771.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:32.088Z,1516420772.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:32.491Z,1516420772.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:32.884Z,1516420772.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:33.303Z,1516420773.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:33.708Z,1516420773.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:34.112Z,1516420774.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:34.499Z,1516420774.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:34.884Z,1516420774.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:35.284Z,1516420775.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:35.679Z,1516420775.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:36.083Z,1516420776.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:36.487Z,1516420776.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:36.883Z,1516420776.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:37.283Z,1516420777.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:37.681Z,1516420777.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:38.088Z,1516420778.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:38.505Z,1516420778.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:38.898Z,1516420778.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:39.302Z,1516420779.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:39.706Z,1516420779.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:40.093Z,1516420780.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:40.487Z,1516420780.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:40.886Z,1516420780.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:41.288Z,1516420781.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:41.691Z,1516420781.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:42.088Z,1516420782.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:42.484Z,1516420782.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:42.879Z,1516420782.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:43.291Z,1516420783.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:43.696Z,1516420783.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:44.094Z,1516420784.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:44.497Z,1516420784.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:44.898Z,1516420784.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:45.283Z,1516420785.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:45.687Z,1516420785.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:46.091Z,1516420786.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:46.489Z,1516420786.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:46.891Z,1516420786.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:47.285Z,1516420787.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:47.690Z,1516420787.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:48.091Z,1516420788.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:48.485Z,1516420788.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:48.897Z,1516420788.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:49.301Z,1516420789.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:49.696Z,1516420789.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:50.105Z,1516420790.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:50.495Z,1516420790.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:50.883Z,1516420790.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:51.283Z,1516420791.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:51.687Z,1516420791.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:52.087Z,1516420792.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:52.479Z,1516420792.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:52.906Z,1516420792.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:53.289Z,1516420793.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:53.691Z,1516420793.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:54.101Z,1516420794.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:54.502Z,1516420794.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:54.906Z,1516420794.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:55.294Z,1516420795.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:55.689Z,1516420795.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:56.094Z,1516420796.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:56.491Z,1516420796.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:56.894Z,1516420796.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:57.290Z,1516420797.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:57.686Z,1516420797.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:58.095Z,1516420798.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:58.491Z,1516420798.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:58.879Z,1516420798.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:59.297Z,1516420799.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T03:59:59.702Z,1516420799.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:00.103Z,1516420800.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:00.494Z,1516420800.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:00.895Z,1516420800.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:01.283Z,1516420801.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:01.681Z,1516420801.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:02.083Z,1516420802.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:02.483Z,1516420802.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:02.895Z,1516420802.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:03.283Z,1516420803.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:03.695Z,1516420803.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:04.095Z,1516420804.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:04.501Z,1516420804.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:04.902Z,1516420804.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:05.300Z,1516420805.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:05.702Z,1516420805.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:06.083Z,1516420806.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:06.478Z,1516420806.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:06.886Z,1516420806.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:07.283Z,1516420807.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:07.677Z,1516420807.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:08.083Z,1516420808.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:08.486Z,1516420808.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:08.884Z,1516420808.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:09.282Z,1516420809.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:09.707Z,1516420809.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:12.970Z,1516420812.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:13.105Z,1516420813.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:13.477Z,1516420813.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:13.874Z,1516420813.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:14.266Z,1516420814.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:14.667Z,1516420814.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:15.071Z,1516420815.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:15.474Z,1516420815.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:15.867Z,1516420815.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:16.260Z,1516420816.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:16.667Z,1516420816.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:17.068Z,1516420817.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:17.457Z,1516420817.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:17.882Z,1516420817.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:18.285Z,1516420818.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:18.676Z,1516420818.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:19.081Z,1516420819.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:19.477Z,1516420819.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:19.863Z,1516420819.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:20.259Z,1516420820.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:20.659Z,1516420820.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:21.055Z,1516420821.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:21.459Z,1516420821.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:21.860Z,1516420821.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:22.257Z,1516420822.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:22.658Z,1516420822.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:23.070Z,1516420823.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:23.470Z,1516420823.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:23.883Z,1516420823.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:24.286Z,1516420824.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:24.663Z,1516420824.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:25.066Z,1516420825.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:25.465Z,1516420825.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:25.871Z,1516420825.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:26.262Z,1516420826.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:26.666Z,1516420826.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:27.058Z,1516420827.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:27.465Z,1516420827.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:27.862Z,1516420827.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:28.276Z,1516420828.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:28.682Z,1516420828.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:29.087Z,1516420829.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:29.470Z,1516420829.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:29.863Z,1516420829.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:30.260Z,1516420830.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:30.658Z,1516420830.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:31.066Z,1516420831.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:31.468Z,1516420831.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:31.872Z,1516420831.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:32.266Z,1516420832.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:32.668Z,1516420832.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:33.058Z,1516420833.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:33.478Z,1516420833.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:33.883Z,1516420833.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:34.276Z,1516420834.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:34.678Z,1516420834.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:35.076Z,1516420835.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:35.455Z,1516420835.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:35.864Z,1516420835.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:36.260Z,1516420836.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:36.664Z,1516420836.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:37.055Z,1516420837.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:37.463Z,1516420837.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:37.864Z,1516420837.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:38.260Z,1516420838.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:38.678Z,1516420838.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:39.066Z,1516420839.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:39.469Z,1516420839.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:39.874Z,1516420839.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:40.258Z,1516420840.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:40.663Z,1516420840.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:41.068Z,1516420841.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:41.458Z,1516420841.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:41.864Z,1516420841.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:42.263Z,1516420842.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:42.654Z,1516420842.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:43.055Z,1516420843.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:43.472Z,1516420843.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:43.871Z,1516420843.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:44.274Z,1516420844.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:44.678Z,1516420844.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:45.070Z,1516420845.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:45.455Z,1516420845.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:45.859Z,1516420845.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:46.254Z,1516420846.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:46.655Z,1516420846.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:47.076Z,1516420847.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:47.455Z,1516420847.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:47.855Z,1516420847.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:48.259Z,1516420848.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:48.655Z,1516420848.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:49.074Z,1516420849.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:49.479Z,1516420849.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:49.870Z,1516420849.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:50.272Z,1516420850.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:50.659Z,1516420850.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:51.088Z,1516420851.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:51.455Z,1516420851.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:51.864Z,1516420851.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:52.306Z,1516420852.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:52.664Z,1516420852.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:53.063Z,1516420853.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:53.460Z,1516420853.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:53.862Z,1516420853.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:54.274Z,1516420854.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:54.666Z,1516420854.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:55.066Z,1516420855.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:55.470Z,1516420855.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:55.868Z,1516420855.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:56.262Z,1516420856.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:56.664Z,1516420856.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:57.058Z,1516420857.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:57.463Z,1516420857.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:57.863Z,1516420857.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:58.271Z,1516420858.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:58.655Z,1516420858.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:59.062Z,1516420859.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:59.482Z,1516420859.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:00:59.881Z,1516420859.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:00.279Z,1516420860.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:00.670Z,1516420860.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:01.063Z,1516420861.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:01.459Z,1516420861.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:01.864Z,1516420861.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:02.255Z,1516420862.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:02.667Z,1516420862.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:03.067Z,1516420863.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:03.467Z,1516420863.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:03.866Z,1516420863.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:04.264Z,1516420864.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:04.669Z,1516420864.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:05.074Z,1516420865.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:05.473Z,1516420865.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:05.876Z,1516420865.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:06.266Z,1516420866.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:06.654Z,1516420866.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:07.055Z,1516420867.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:07.469Z,1516420867.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:07.854Z,1516420867.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:08.268Z,1516420868.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:08.673Z,1516420868.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:09.056Z,1516420869.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:09.460Z,1516420869.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:09.877Z,1516420869.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:13.146Z,1516420873.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:13.277Z,1516420873.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:13.662Z,1516420873.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:14.044Z,1516420874.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:14.448Z,1516420874.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:14.848Z,1516420874.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:15.238Z,1516420875.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:15.643Z,1516420875.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:16.057Z,1516420876.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:16.435Z,1516420876.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:16.835Z,1516420876.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:17.239Z,1516420877.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:17.657Z,1516420877.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:18.054Z,1516420878.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:18.453Z,1516420878.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:18.850Z,1516420878.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:19.235Z,1516420879.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:19.643Z,1516420879.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:20.038Z,1516420880.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:20.443Z,1516420880.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:20.844Z,1516420880.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:21.245Z,1516420881.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:21.643Z,1516420881.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:22.047Z,1516420882.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:22.447Z,1516420882.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:22.846Z,1516420882.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:23.266Z,1516420883.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:23.650Z,1516420883.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:24.050Z,1516420884.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:24.449Z,1516420884.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:24.838Z,1516420884.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:25.235Z,1516420885.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:25.642Z,1516420885.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:26.052Z,1516420886.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:26.440Z,1516420886.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:26.840Z,1516420886.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:27.244Z,1516420887.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:27.636Z,1516420887.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:28.062Z,1516420888.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:28.447Z,1516420888.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:28.847Z,1516420888.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:29.251Z,1516420889.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:29.635Z,1516420889.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:30.045Z,1516420890.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:30.446Z,1516420890.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:30.847Z,1516420890.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:31.246Z,1516420891.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:31.643Z,1516420891.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:32.051Z,1516420892.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:32.450Z,1516420892.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:32.849Z,1516420892.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:33.251Z,1516420893.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:33.656Z,1516420893.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:34.060Z,1516420894.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:34.462Z,1516420894.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:34.851Z,1516420894.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:35.239Z,1516420895.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:35.643Z,1516420895.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:36.035Z,1516420896.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:36.439Z,1516420896.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:36.839Z,1516420896.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:37.247Z,1516420897.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:37.647Z,1516420897.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:38.048Z,1516420898.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:38.449Z,1516420898.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:38.854Z,1516420898.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:39.257Z,1516420899.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:39.654Z,1516420899.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:40.048Z,1516420900.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:40.434Z,1516420900.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:40.835Z,1516420900.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:41.252Z,1516420901.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:41.651Z,1516420901.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:42.035Z,1516420902.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:42.435Z,1516420902.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:42.835Z,1516420902.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:43.250Z,1516420903.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:43.658Z,1516420903.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:44.054Z,1516420904.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:44.454Z,1516420904.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:44.862Z,1516420904.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:45.243Z,1516420905.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:45.635Z,1516420905.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:46.042Z,1516420906.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:46.442Z,1516420906.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:46.835Z,1516420906.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:47.235Z,1516420907.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:47.644Z,1516420907.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:48.044Z,1516420908.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:48.443Z,1516420908.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:48.858Z,1516420908.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:49.246Z,1516420909.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:49.646Z,1516420909.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:50.054Z,1516420910.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:50.443Z,1516420910.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:50.846Z,1516420910.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:51.242Z,1516420911.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:51.643Z,1516420911.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:52.048Z,1516420912.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:52.445Z,1516420912.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:52.851Z,1516420912.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:53.242Z,1516420913.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:53.646Z,1516420913.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:54.057Z,1516420914.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:54.459Z,1516420914.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:54.858Z,1516420914.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:55.254Z,1516420915.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:55.642Z,1516420915.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:56.051Z,1516420916.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:56.435Z,1516420916.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:56.852Z,1516420916.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:57.242Z,1516420917.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:57.650Z,1516420917.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:58.039Z,1516420918.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:58.450Z,1516420918.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:58.835Z,1516420918.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:59.254Z,1516420919.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:01:59.662Z,1516420919.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:00.054Z,1516420920.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:00.458Z,1516420920.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:00.851Z,1516420920.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:01.239Z,1516420921.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:01.639Z,1516420921.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:02.050Z,1516420922.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:02.435Z,1516420922.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:02.839Z,1516420922.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:03.250Z,1516420923.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:03.635Z,1516420923.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:04.035Z,1516420924.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:04.463Z,1516420924.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:04.862Z,1516420924.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:05.263Z,1516420925.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:05.659Z,1516420925.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:06.036Z,1516420926.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:06.436Z,1516420926.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:06.856Z,1516420926.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:07.236Z,1516420927.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:07.647Z,1516420927.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:08.041Z,1516420928.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:08.439Z,1516420928.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:08.843Z,1516420928.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:09.245Z,1516420929.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:09.288Z,1516420929.288 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T03:57:09.2Z
2018-01-20T04:02:09.288Z,1516420929.288 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T04:02:09.288Z,1516420929.288 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T04:02:09.646Z,1516420929.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:10.120Z,1516420930.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:13.346Z,1516420933.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:13.449Z,1516420933.449 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0176.lzma
2018-01-20T04:02:13.492Z,1516420933.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:13.855Z,1516420933.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:14.649Z,1516420934.649 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0176.lzma.bak
2018-01-20T04:02:14.649Z,1516420934.649 [DataOverHttps](INFO): SBD MOMSN=7726144
2018-01-20T04:02:14.703Z,1516420934.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:15.087Z,1516420935.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:15.223Z,1516420935.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:18.493Z,1516420938.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:18.613Z,1516420938.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:18.972Z,1516420938.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:19.365Z,1516420939.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:19.771Z,1516420939.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:20.183Z,1516420940.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:23.486Z,1516420943.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:23.591Z,1516420943.591 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20180119T210901/Express0177.lzma
2018-01-20T04:02:23.630Z,1516420943.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:23.987Z,1516420943.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:24.363Z,1516420944.363 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0177.lzma.bak
2018-01-20T04:02:24.363Z,1516420944.363 [DataOverHttps](INFO): SBD MOMSN=7726146
2018-01-20T04:02:24.426Z,1516420944.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:24.894Z,1516420944.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:24.930Z,1516420944.930 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T04:02:24.930Z,1516420944.930 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T04:02:24.931Z,1516420944.931 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T04:02:25.204Z,1516420945.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:28.478Z,1516420948.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:28.602Z,1516420948.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:28.973Z,1516420948.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:29.380Z,1516420949.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:29.780Z,1516420949.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:30.189Z,1516420950.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:30.583Z,1516420950.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:30.974Z,1516420950.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:31.367Z,1516420951.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:31.403Z,1516420951.403 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:02:31.403Z,1516420951.403 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2018-01-20T04:02:31.403Z,1516420951.403 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:02:31.417Z,1516420951.417 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:02:31.767Z,1516420951.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:31.820Z,1516420951.820 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:02:31.820Z,1516420951.820 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2018-01-20T04:02:32.162Z,1516420952.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:32.180Z,1516420952.180 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:02:32.197Z,1516420952.197 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:02:32.197Z,1516420952.197 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:02:32.567Z,1516420952.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:32.967Z,1516420952.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:33.364Z,1516420953.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:33.771Z,1516420953.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:34.171Z,1516420954.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:34.577Z,1516420954.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:35.059Z,1516420955.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:35.378Z,1516420955.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:35.782Z,1516420955.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:36.175Z,1516420956.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:36.575Z,1516420956.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:36.978Z,1516420956.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:37.370Z,1516420957.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:37.772Z,1516420957.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:38.166Z,1516420958.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:38.570Z,1516420958.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:38.963Z,1516420958.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:39.363Z,1516420959.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:39.770Z,1516420959.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:40.163Z,1516420960.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:40.562Z,1516420960.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:40.979Z,1516420960.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:41.363Z,1516420961.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:41.769Z,1516420961.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:42.179Z,1516420962.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:42.563Z,1516420962.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:42.962Z,1516420962.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:43.367Z,1516420963.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:43.763Z,1516420963.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:44.181Z,1516420964.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:44.586Z,1516420964.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:44.963Z,1516420964.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:45.364Z,1516420965.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:45.779Z,1516420965.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:46.163Z,1516420966.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:46.563Z,1516420966.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:46.967Z,1516420966.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:47.367Z,1516420967.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:47.761Z,1516420967.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:48.165Z,1516420968.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:48.581Z,1516420968.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:48.991Z,1516420968.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:49.367Z,1516420969.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:49.763Z,1516420969.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:50.163Z,1516420970.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:50.567Z,1516420970.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:50.967Z,1516420970.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:51.364Z,1516420971.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:51.767Z,1516420971.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:52.163Z,1516420972.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:52.563Z,1516420972.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:52.990Z,1516420972.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:53.382Z,1516420973.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:53.761Z,1516420973.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:54.167Z,1516420974.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:54.563Z,1516420974.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:54.971Z,1516420974.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:55.367Z,1516420975.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:55.763Z,1516420975.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:56.171Z,1516420976.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:56.583Z,1516420976.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:56.963Z,1516420976.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:57.378Z,1516420977.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:57.787Z,1516420977.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:58.186Z,1516420978.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:58.582Z,1516420978.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:58.970Z,1516420978.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:59.364Z,1516420979.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:02:59.766Z,1516420979.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:00.172Z,1516420980.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:00.564Z,1516420980.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:00.972Z,1516420980.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:01.372Z,1516420981.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:01.776Z,1516420981.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:02.186Z,1516420982.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:02.591Z,1516420982.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:02.972Z,1516420982.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:03.365Z,1516420983.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:03.772Z,1516420983.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:04.190Z,1516420984.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:04.578Z,1516420984.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:04.974Z,1516420984.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:05.372Z,1516420985.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:05.766Z,1516420985.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:06.176Z,1516420986.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:06.563Z,1516420986.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:06.963Z,1516420986.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:07.370Z,1516420987.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:07.763Z,1516420987.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:08.178Z,1516420988.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:08.567Z,1516420988.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:08.979Z,1516420988.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:09.347Z,1516420989.347 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T04:03:09.365Z,1516420989.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:09.771Z,1516420989.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:10.163Z,1516420990.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:10.560Z,1516420990.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:10.962Z,1516420990.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:11.363Z,1516420991.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:11.764Z,1516420991.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:12.162Z,1516420992.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:12.570Z,1516420992.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:12.974Z,1516420992.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:13.367Z,1516420993.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:13.771Z,1516420993.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:14.171Z,1516420994.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:14.562Z,1516420994.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:14.970Z,1516420994.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:15.364Z,1516420995.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:15.766Z,1516420995.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:16.167Z,1516420996.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:16.563Z,1516420996.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:16.978Z,1516420996.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:17.374Z,1516420997.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:17.772Z,1516420997.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:18.179Z,1516420998.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:18.575Z,1516420998.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:18.978Z,1516420998.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:19.370Z,1516420999.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:19.774Z,1516420999.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:20.171Z,1516421000.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:20.570Z,1516421000.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:20.970Z,1516421000.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:21.367Z,1516421001.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:21.770Z,1516421001.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:22.178Z,1516421002.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:22.571Z,1516421002.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:22.969Z,1516421002.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:23.374Z,1516421003.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:23.770Z,1516421003.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:24.170Z,1516421004.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:24.573Z,1516421004.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:24.978Z,1516421004.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:25.373Z,1516421005.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:28.668Z,1516421008.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:28.786Z,1516421008.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:29.145Z,1516421009.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:29.539Z,1516421009.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:29.934Z,1516421009.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:30.350Z,1516421010.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:30.740Z,1516421010.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:31.127Z,1516421011.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:31.526Z,1516421011.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:31.927Z,1516421011.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:32.328Z,1516421012.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:32.734Z,1516421012.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:33.135Z,1516421013.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:33.524Z,1516421013.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:33.927Z,1516421013.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:34.327Z,1516421014.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:34.728Z,1516421014.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:35.130Z,1516421015.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:35.527Z,1516421015.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:35.928Z,1516421015.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:36.327Z,1516421016.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:36.735Z,1516421016.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:37.136Z,1516421017.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:37.534Z,1516421017.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:37.935Z,1516421017.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:38.331Z,1516421018.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:38.740Z,1516421018.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:39.139Z,1516421019.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:39.531Z,1516421019.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:39.922Z,1516421019.922 [NAL9602](INFO): Powering down
2018-01-20T04:03:39.941Z,1516421019.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:40.346Z,1516421020.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:40.731Z,1516421020.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:41.134Z,1516421021.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:41.535Z,1516421021.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:41.928Z,1516421021.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:42.338Z,1516421022.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:42.733Z,1516421022.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:43.131Z,1516421023.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:43.531Z,1516421023.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:43.935Z,1516421023.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:44.327Z,1516421024.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:44.738Z,1516421024.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:45.142Z,1516421025.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:45.536Z,1516421025.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:45.935Z,1516421025.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:46.343Z,1516421026.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:46.727Z,1516421026.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:47.139Z,1516421027.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:47.531Z,1516421027.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:47.927Z,1516421027.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:48.331Z,1516421028.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:48.742Z,1516421028.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:49.127Z,1516421029.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:49.551Z,1516421029.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:49.943Z,1516421029.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:50.327Z,1516421030.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:50.726Z,1516421030.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:51.143Z,1516421031.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:51.539Z,1516421031.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:51.943Z,1516421031.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:52.338Z,1516421032.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:52.740Z,1516421032.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:53.139Z,1516421033.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:53.532Z,1516421033.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:53.927Z,1516421033.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:54.331Z,1516421034.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:54.737Z,1516421034.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:55.131Z,1516421035.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:55.535Z,1516421035.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:55.933Z,1516421035.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:56.335Z,1516421036.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:56.739Z,1516421036.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:57.127Z,1516421037.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:57.526Z,1516421037.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:57.927Z,1516421037.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:58.325Z,1516421038.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:58.727Z,1516421038.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:59.131Z,1516421039.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:59.527Z,1516421039.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:03:59.927Z,1516421039.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:00.326Z,1516421040.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:00.728Z,1516421040.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:01.126Z,1516421041.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:01.538Z,1516421041.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:01.934Z,1516421041.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:02.338Z,1516421042.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:02.739Z,1516421042.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:03.134Z,1516421043.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:03.534Z,1516421043.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:03.938Z,1516421043.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:04.334Z,1516421044.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:04.727Z,1516421044.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:05.130Z,1516421045.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:05.524Z,1516421045.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:05.927Z,1516421045.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:06.338Z,1516421046.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:06.728Z,1516421046.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:07.131Z,1516421047.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:07.538Z,1516421047.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:07.931Z,1516421047.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:08.339Z,1516421048.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:08.734Z,1516421048.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:09.127Z,1516421049.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:09.527Z,1516421049.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:09.926Z,1516421049.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:10.324Z,1516421050.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:10.735Z,1516421050.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:11.138Z,1516421051.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:11.525Z,1516421051.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:11.935Z,1516421051.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:12.334Z,1516421052.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:12.734Z,1516421052.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:13.134Z,1516421053.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:13.539Z,1516421053.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:13.943Z,1516421053.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:14.327Z,1516421054.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:14.726Z,1516421054.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:15.128Z,1516421055.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:15.538Z,1516421055.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:15.935Z,1516421055.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:16.325Z,1516421056.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:16.735Z,1516421056.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:17.138Z,1516421057.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:17.525Z,1516421057.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:17.940Z,1516421057.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:18.337Z,1516421058.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:18.734Z,1516421058.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:19.134Z,1516421059.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:19.534Z,1516421059.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:19.927Z,1516421059.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:20.334Z,1516421060.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:20.731Z,1516421060.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:21.142Z,1516421061.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:21.543Z,1516421061.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:21.951Z,1516421061.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:22.327Z,1516421062.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:22.731Z,1516421062.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:23.139Z,1516421063.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:23.531Z,1516421063.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:23.943Z,1516421063.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:24.336Z,1516421064.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:24.734Z,1516421064.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:25.134Z,1516421065.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:25.547Z,1516421065.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:28.806Z,1516421068.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:28.926Z,1516421068.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:29.311Z,1516421069.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:29.710Z,1516421069.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:30.110Z,1516421070.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:30.511Z,1516421070.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:30.910Z,1516421070.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:31.310Z,1516421071.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:31.710Z,1516421071.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:32.113Z,1516421072.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:32.514Z,1516421072.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:32.909Z,1516421072.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:33.303Z,1516421073.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:33.714Z,1516421073.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:34.110Z,1516421074.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:34.502Z,1516421074.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:34.911Z,1516421074.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:35.310Z,1516421075.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:35.708Z,1516421075.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:36.111Z,1516421076.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:36.510Z,1516421076.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:36.903Z,1516421076.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:37.311Z,1516421077.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:37.715Z,1516421077.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:38.103Z,1516421078.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:38.508Z,1516421078.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:38.909Z,1516421078.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:39.306Z,1516421079.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:39.708Z,1516421079.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:40.107Z,1516421080.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:40.507Z,1516421080.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:40.915Z,1516421080.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:41.309Z,1516421081.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:41.708Z,1516421081.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:42.111Z,1516421082.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:42.506Z,1516421082.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:42.914Z,1516421082.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:43.315Z,1516421083.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:43.706Z,1516421083.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:44.115Z,1516421084.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:44.515Z,1516421084.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:44.919Z,1516421084.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:45.315Z,1516421085.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:45.706Z,1516421085.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:46.103Z,1516421086.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:46.500Z,1516421086.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:46.919Z,1516421086.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:47.303Z,1516421087.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:47.715Z,1516421087.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:48.116Z,1516421088.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:48.527Z,1516421088.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:48.899Z,1516421088.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:49.304Z,1516421089.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:49.707Z,1516421089.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:50.103Z,1516421090.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:50.503Z,1516421090.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:50.903Z,1516421090.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:51.306Z,1516421091.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:51.700Z,1516421091.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:52.111Z,1516421092.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:52.499Z,1516421092.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:52.907Z,1516421092.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:53.307Z,1516421093.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:53.708Z,1516421093.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:54.111Z,1516421094.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:54.511Z,1516421094.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:54.909Z,1516421094.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:55.310Z,1516421095.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:55.709Z,1516421095.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:56.112Z,1516421096.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:56.509Z,1516421096.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:56.916Z,1516421096.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:57.310Z,1516421097.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:57.710Z,1516421097.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:58.106Z,1516421098.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:58.514Z,1516421098.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:58.914Z,1516421098.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:59.312Z,1516421099.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:04:59.700Z,1516421099.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:00.110Z,1516421100.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:00.506Z,1516421100.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:00.908Z,1516421100.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:01.303Z,1516421101.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:01.719Z,1516421101.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:02.103Z,1516421102.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:02.502Z,1516421102.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:02.908Z,1516421102.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:03.303Z,1516421103.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:03.700Z,1516421103.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:04.105Z,1516421104.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:04.508Z,1516421104.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:04.906Z,1516421104.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:05.307Z,1516421105.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:05.712Z,1516421105.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:06.106Z,1516421106.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:06.510Z,1516421106.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:06.909Z,1516421106.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:07.309Z,1516421107.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:07.710Z,1516421107.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:08.109Z,1516421108.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:08.509Z,1516421108.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:08.913Z,1516421108.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:09.310Z,1516421109.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:09.710Z,1516421109.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:10.116Z,1516421110.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:10.511Z,1516421110.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:10.910Z,1516421110.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:11.312Z,1516421111.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:11.711Z,1516421111.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:12.117Z,1516421112.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:12.505Z,1516421112.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:12.901Z,1516421112.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:13.298Z,1516421113.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:13.718Z,1516421113.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:14.099Z,1516421114.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:14.502Z,1516421114.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:14.516Z,1516421114.516 [PNI_TCM](ERROR): CRC does not match. Expected:0x61558 got:0x61980
2018-01-20T04:05:14.904Z,1516421114.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:15.299Z,1516421115.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:15.700Z,1516421115.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:16.105Z,1516421116.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:16.501Z,1516421116.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:16.906Z,1516421116.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:17.303Z,1516421117.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:17.700Z,1516421117.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:18.104Z,1516421118.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:18.511Z,1516421118.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:18.903Z,1516421118.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:19.310Z,1516421119.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:19.710Z,1516421119.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:20.111Z,1516421120.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:20.506Z,1516421120.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:20.918Z,1516421120.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:21.309Z,1516421121.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:21.706Z,1516421121.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:22.116Z,1516421122.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:22.508Z,1516421122.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:22.910Z,1516421122.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:23.306Z,1516421123.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:23.714Z,1516421123.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:24.118Z,1516421124.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:24.510Z,1516421124.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:24.899Z,1516421124.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:25.301Z,1516421125.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:25.704Z,1516421125.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:28.999Z,1516421128.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:29.124Z,1516421129.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:29.495Z,1516421129.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:29.899Z,1516421129.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:30.292Z,1516421130.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:30.695Z,1516421130.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:31.094Z,1516421131.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:31.492Z,1516421131.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:31.900Z,1516421131.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:32.294Z,1516421132.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:32.313Z,1516421132.313 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:05:32.313Z,1516421132.313 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2018-01-20T04:05:32.313Z,1516421132.313 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:05:32.325Z,1516421132.325 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:05:32.694Z,1516421132.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:32.724Z,1516421132.724 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:05:32.724Z,1516421132.724 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2018-01-20T04:05:33.087Z,1516421133.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:33.123Z,1516421133.123 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:05:33.123Z,1516421133.123 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:05:33.123Z,1516421133.123 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:05:33.487Z,1516421133.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:33.890Z,1516421133.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:34.306Z,1516421134.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:34.687Z,1516421134.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:35.090Z,1516421135.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:35.495Z,1516421135.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:35.887Z,1516421135.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:36.279Z,1516421136.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:36.695Z,1516421136.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:37.094Z,1516421137.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:37.487Z,1516421137.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:37.899Z,1516421137.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:38.293Z,1516421138.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:38.692Z,1516421138.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:39.095Z,1516421139.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:39.493Z,1516421139.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:39.894Z,1516421139.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:40.301Z,1516421140.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:40.695Z,1516421140.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:41.098Z,1516421141.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:41.500Z,1516421141.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:41.895Z,1516421141.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:42.292Z,1516421142.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:42.703Z,1516421142.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:43.083Z,1516421143.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:43.481Z,1516421143.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:43.887Z,1516421143.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:44.283Z,1516421144.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:44.683Z,1516421144.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:45.087Z,1516421145.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:45.491Z,1516421145.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:45.881Z,1516421145.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:46.291Z,1516421146.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:46.683Z,1516421146.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:47.086Z,1516421147.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:47.488Z,1516421147.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:47.892Z,1516421147.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:48.281Z,1516421148.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:48.687Z,1516421148.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:49.091Z,1516421149.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:49.492Z,1516421149.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:49.892Z,1516421149.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:50.290Z,1516421150.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:50.690Z,1516421150.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:51.090Z,1516421151.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:51.490Z,1516421151.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:51.894Z,1516421151.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:52.298Z,1516421152.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:52.690Z,1516421152.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:53.090Z,1516421153.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:53.490Z,1516421153.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:53.891Z,1516421153.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:54.292Z,1516421154.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:54.694Z,1516421154.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:55.090Z,1516421155.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:55.480Z,1516421155.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:55.898Z,1516421155.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:56.286Z,1516421156.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:56.683Z,1516421156.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:57.106Z,1516421157.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:57.483Z,1516421157.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:57.883Z,1516421157.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:58.282Z,1516421158.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:58.698Z,1516421158.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:59.098Z,1516421159.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:59.487Z,1516421159.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:05:59.899Z,1516421159.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:00.284Z,1516421160.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:00.682Z,1516421160.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:01.091Z,1516421161.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:01.484Z,1516421161.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:01.894Z,1516421161.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:02.291Z,1516421162.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:02.684Z,1516421162.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:03.090Z,1516421163.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:03.483Z,1516421163.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:03.883Z,1516421163.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:04.294Z,1516421164.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:04.691Z,1516421164.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:05.091Z,1516421165.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:05.489Z,1516421165.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:05.890Z,1516421165.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:06.286Z,1516421166.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:06.692Z,1516421166.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:07.092Z,1516421167.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:07.490Z,1516421167.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:07.892Z,1516421167.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:08.292Z,1516421168.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:08.690Z,1516421168.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:09.092Z,1516421169.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:09.496Z,1516421169.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:09.889Z,1516421169.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:10.290Z,1516421170.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:10.693Z,1516421170.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:11.095Z,1516421171.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:11.490Z,1516421171.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:11.900Z,1516421171.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:12.292Z,1516421172.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:12.694Z,1516421172.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:13.098Z,1516421173.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:13.492Z,1516421173.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:13.890Z,1516421173.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:14.299Z,1516421174.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:14.690Z,1516421174.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:15.094Z,1516421175.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:15.493Z,1516421175.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:15.899Z,1516421175.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:16.294Z,1516421176.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:16.690Z,1516421176.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:17.083Z,1516421177.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:17.502Z,1516421177.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:17.887Z,1516421177.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:18.283Z,1516421178.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:18.686Z,1516421178.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:19.099Z,1516421179.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:19.483Z,1516421179.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:19.882Z,1516421179.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:20.287Z,1516421180.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:20.683Z,1516421180.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:21.086Z,1516421181.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:21.491Z,1516421181.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:21.894Z,1516421181.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:22.298Z,1516421182.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:22.689Z,1516421182.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:23.091Z,1516421183.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:23.492Z,1516421183.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:23.898Z,1516421183.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:24.291Z,1516421184.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:24.695Z,1516421184.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:25.097Z,1516421185.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:25.495Z,1516421185.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:25.902Z,1516421185.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:29.221Z,1516421189.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:29.344Z,1516421189.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:29.712Z,1516421189.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:30.115Z,1516421190.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:30.510Z,1516421190.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:30.912Z,1516421190.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:31.313Z,1516421191.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:31.710Z,1516421191.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:32.109Z,1516421192.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:32.516Z,1516421192.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:32.912Z,1516421192.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:33.313Z,1516421193.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:33.713Z,1516421193.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:34.110Z,1516421194.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:34.509Z,1516421194.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:34.913Z,1516421194.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:35.310Z,1516421195.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:35.714Z,1516421195.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:36.113Z,1516421196.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:36.500Z,1516421196.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:36.918Z,1516421196.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:37.319Z,1516421197.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:37.704Z,1516421197.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:38.106Z,1516421198.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:38.507Z,1516421198.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:38.902Z,1516421198.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:39.302Z,1516421199.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:39.707Z,1516421199.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:40.106Z,1516421200.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:40.506Z,1516421200.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:40.907Z,1516421200.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:41.302Z,1516421201.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:41.703Z,1516421201.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:42.107Z,1516421202.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:42.511Z,1516421202.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:42.911Z,1516421202.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:43.311Z,1516421203.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:43.711Z,1516421203.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:44.114Z,1516421204.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:44.511Z,1516421204.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:44.911Z,1516421204.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:45.312Z,1516421205.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:45.714Z,1516421205.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:46.112Z,1516421206.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:46.512Z,1516421206.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:46.913Z,1516421206.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:47.319Z,1516421207.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:47.720Z,1516421207.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:48.108Z,1516421208.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:48.508Z,1516421208.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:48.904Z,1516421208.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:49.302Z,1516421209.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:49.708Z,1516421209.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:50.112Z,1516421210.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:50.508Z,1516421210.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:50.910Z,1516421210.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:51.315Z,1516421211.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:51.707Z,1516421211.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:52.110Z,1516421212.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:52.509Z,1516421212.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:52.903Z,1516421212.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:53.310Z,1516421213.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:53.702Z,1516421213.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:54.103Z,1516421214.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:54.503Z,1516421214.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:54.927Z,1516421214.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:55.300Z,1516421215.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:55.703Z,1516421215.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:56.102Z,1516421216.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:56.503Z,1516421216.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:56.907Z,1516421216.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:57.314Z,1516421217.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:57.707Z,1516421217.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:58.112Z,1516421218.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:58.510Z,1516421218.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:58.910Z,1516421218.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:59.314Z,1516421219.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:06:59.714Z,1516421219.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:00.110Z,1516421220.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:00.510Z,1516421220.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:00.913Z,1516421220.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:01.308Z,1516421221.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:01.715Z,1516421221.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:02.113Z,1516421222.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:02.510Z,1516421222.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:02.910Z,1516421222.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:03.310Z,1516421223.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:03.710Z,1516421223.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:04.110Z,1516421224.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:04.515Z,1516421224.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:04.910Z,1516421224.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:05.318Z,1516421225.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:05.710Z,1516421225.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:06.110Z,1516421226.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:06.518Z,1516421226.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:06.913Z,1516421226.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:07.310Z,1516421227.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:07.712Z,1516421227.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:08.110Z,1516421228.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:08.511Z,1516421228.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:08.914Z,1516421228.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:09.314Z,1516421229.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:09.710Z,1516421229.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:10.113Z,1516421230.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:10.510Z,1516421230.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:10.919Z,1516421230.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:11.313Z,1516421231.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:11.714Z,1516421231.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:12.111Z,1516421232.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:12.513Z,1516421232.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:12.914Z,1516421232.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:13.310Z,1516421233.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:13.713Z,1516421233.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:14.113Z,1516421234.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:14.500Z,1516421234.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:14.913Z,1516421234.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:15.313Z,1516421235.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:15.710Z,1516421235.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:16.113Z,1516421236.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:16.519Z,1516421236.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:16.918Z,1516421236.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:17.319Z,1516421237.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:17.710Z,1516421237.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:18.118Z,1516421238.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:18.519Z,1516421238.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:18.907Z,1516421238.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:19.303Z,1516421239.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:19.707Z,1516421239.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:20.107Z,1516421240.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:20.502Z,1516421240.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:20.907Z,1516421240.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:21.307Z,1516421241.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:21.707Z,1516421241.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:22.115Z,1516421242.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:22.515Z,1516421242.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:22.919Z,1516421242.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:23.315Z,1516421243.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:23.714Z,1516421243.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:24.112Z,1516421244.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:24.517Z,1516421244.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:24.910Z,1516421244.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:25.320Z,1516421245.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:25.340Z,1516421245.340 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T04:07:25.340Z,1516421245.340 [Default:CheckIn:C.Wait] Stopped
2018-01-20T04:07:25.340Z,1516421245.340 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T04:07:25.341Z,1516421245.341 [Default:CheckIn:D] Running Loop=1
2018-01-20T04:07:25.714Z,1516421245.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:25.751Z,1516421245.751 [Default:CheckIn:D] Stopped
2018-01-20T04:07:25.751Z,1516421245.751 [Default:CheckIn:E] Running Loop=1
2018-01-20T04:07:26.124Z,1516421246.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:26.146Z,1516421246.146 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 123.818766 min 
2018-01-20T04:07:26.146Z,1516421246.146 [Default:CheckIn:E] Stopped
2018-01-20T04:07:26.147Z,1516421246.147 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T04:07:26.147Z,1516421246.147 [Default:CheckIn] Stopped
2018-01-20T04:07:26.147Z,1516421246.147 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T04:07:26.147Z,1516421246.147 [Default:CheckIn](INFO): Running loop #13
2018-01-20T04:07:26.147Z,1516421246.147 [Default:CheckIn] Running Loop=13
2018-01-20T04:07:26.147Z,1516421246.147 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T04:07:26.147Z,1516421246.147 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T04:07:29.390Z,1516421249.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:29.503Z,1516421249.503 [NAL9602](INFO): Powering up
2018-01-20T04:07:29.535Z,1516421249.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:29.899Z,1516421249.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:30.290Z,1516421250.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:30.699Z,1516421250.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:31.097Z,1516421251.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:31.488Z,1516421251.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:31.900Z,1516421251.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:32.294Z,1516421252.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:32.690Z,1516421252.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:33.098Z,1516421253.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:33.493Z,1516421253.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:33.890Z,1516421253.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:34.300Z,1516421254.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:34.690Z,1516421254.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:35.092Z,1516421255.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:35.493Z,1516421255.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:35.899Z,1516421255.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:36.290Z,1516421256.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:36.690Z,1516421256.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:37.093Z,1516421257.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:37.483Z,1516421257.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:37.899Z,1516421257.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:38.307Z,1516421258.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:38.683Z,1516421258.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:39.087Z,1516421259.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:39.503Z,1516421259.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:39.883Z,1516421259.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:40.310Z,1516421260.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:40.674Z,1516421260.674 [NAL9602](INFO): NAL9602 initialized
2018-01-20T04:07:40.691Z,1516421260.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:41.083Z,1516421261.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:41.511Z,1516421261.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:41.898Z,1516421261.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:42.294Z,1516421262.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:42.691Z,1516421262.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:43.087Z,1516421263.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:43.492Z,1516421263.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:43.891Z,1516421263.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:44.295Z,1516421264.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:44.684Z,1516421264.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:45.092Z,1516421265.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:45.495Z,1516421265.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:45.892Z,1516421265.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:46.287Z,1516421266.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:46.698Z,1516421266.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:47.091Z,1516421267.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:47.489Z,1516421267.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:47.900Z,1516421267.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:48.296Z,1516421268.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:48.683Z,1516421268.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:49.098Z,1516421269.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:49.483Z,1516421269.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:49.882Z,1516421269.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:50.287Z,1516421270.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:50.690Z,1516421270.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:51.095Z,1516421271.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:51.495Z,1516421271.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:51.895Z,1516421271.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:52.293Z,1516421272.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:52.694Z,1516421272.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:53.091Z,1516421273.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:53.522Z,1516421273.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:53.889Z,1516421273.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:54.298Z,1516421274.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:54.697Z,1516421274.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:55.087Z,1516421275.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:55.489Z,1516421275.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:55.892Z,1516421275.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:56.295Z,1516421276.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:56.698Z,1516421276.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:57.098Z,1516421277.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:57.514Z,1516421277.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:57.889Z,1516421277.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:58.291Z,1516421278.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:58.714Z,1516421278.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:59.097Z,1516421279.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:59.497Z,1516421279.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:07:59.906Z,1516421279.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:00.289Z,1516421280.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:00.691Z,1516421280.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:01.104Z,1516421281.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:01.489Z,1516421281.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:01.889Z,1516421281.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:02.289Z,1516421282.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:02.693Z,1516421282.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:03.094Z,1516421283.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:03.504Z,1516421283.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:03.898Z,1516421283.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:04.289Z,1516421284.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:04.717Z,1516421284.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:05.089Z,1516421285.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:05.489Z,1516421285.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:05.896Z,1516421285.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:06.297Z,1516421286.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:06.697Z,1516421286.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:07.098Z,1516421287.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:07.500Z,1516421287.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:07.889Z,1516421287.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:08.289Z,1516421288.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:08.711Z,1516421288.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:09.086Z,1516421289.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:09.494Z,1516421289.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:09.890Z,1516421289.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:10.289Z,1516421290.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:10.698Z,1516421290.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:11.092Z,1516421291.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:11.486Z,1516421291.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:11.893Z,1516421291.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:12.295Z,1516421292.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:12.663Z,1516421292.663 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-01-20T04:08:12.741Z,1516421292.741 [NAL9602](FAULT): received: 
+CSQ:0

OK62, 2, 0, 0, 0

OK
2018-01-20T04:08:12.741Z,1516421292.741 [NAL9602] Data Fault, FailCount= 3
2018-01-20T04:08:12.741Z,1516421292.741 [NAL9602](ERROR): Data Fault
2018-01-20T04:08:12.760Z,1516421292.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:12.852Z,1516421292.852 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T04:08:13.082Z,1516421293.082 [NAL9602](INFO): Powering down
2018-01-20T04:08:13.114Z,1516421293.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:13.487Z,1516421293.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:13.881Z,1516421293.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:13.955Z,1516421293.955 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T04:08:13.955Z,1516421293.955 [NAL9602] No Fault, FailCount= 3
2018-01-20T04:08:14.287Z,1516421294.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:14.686Z,1516421294.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:15.084Z,1516421295.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:15.491Z,1516421295.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:15.883Z,1516421295.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:16.284Z,1516421296.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:16.687Z,1516421296.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:17.094Z,1516421297.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:17.480Z,1516421297.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:17.908Z,1516421297.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:18.283Z,1516421298.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:18.684Z,1516421298.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:19.091Z,1516421299.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:19.483Z,1516421299.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:19.884Z,1516421299.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:20.291Z,1516421300.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:20.682Z,1516421300.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:21.084Z,1516421301.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:21.487Z,1516421301.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:21.890Z,1516421301.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:22.284Z,1516421302.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:22.695Z,1516421302.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:23.095Z,1516421303.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:23.493Z,1516421303.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:23.897Z,1516421303.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:24.299Z,1516421304.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:24.696Z,1516421304.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:25.096Z,1516421305.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:25.495Z,1516421305.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:25.891Z,1516421305.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:26.306Z,1516421306.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:29.558Z,1516421309.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:29.670Z,1516421309.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:30.079Z,1516421310.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:30.483Z,1516421310.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:30.876Z,1516421310.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:31.280Z,1516421311.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:31.683Z,1516421311.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:32.082Z,1516421312.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:32.485Z,1516421312.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:32.887Z,1516421312.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:33.280Z,1516421313.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:33.300Z,1516421313.300 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:08:33.300Z,1516421313.300 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2018-01-20T04:08:33.300Z,1516421313.300 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:08:33.313Z,1516421313.313 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:08:33.678Z,1516421313.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:33.747Z,1516421313.747 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:08:33.747Z,1516421313.747 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2018-01-20T04:08:34.087Z,1516421314.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:34.105Z,1516421314.105 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:08:34.105Z,1516421314.105 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:08:34.105Z,1516421314.105 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:08:34.475Z,1516421314.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:34.886Z,1516421314.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:35.275Z,1516421315.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:35.673Z,1516421315.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:36.075Z,1516421316.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:36.475Z,1516421316.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:36.870Z,1516421316.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:37.279Z,1516421317.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:37.675Z,1516421317.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:38.079Z,1516421318.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:38.483Z,1516421318.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:38.875Z,1516421318.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:39.269Z,1516421319.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:39.683Z,1516421319.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:40.075Z,1516421320.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:40.473Z,1516421320.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:40.883Z,1516421320.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:41.282Z,1516421321.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:41.674Z,1516421321.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:42.075Z,1516421322.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:42.484Z,1516421322.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:42.878Z,1516421322.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:43.263Z,1516421323.263 [NAL9602](INFO): Powering up NAL9602
2018-01-20T04:08:43.282Z,1516421323.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:43.684Z,1516421323.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:44.083Z,1516421324.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:44.483Z,1516421324.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:44.886Z,1516421324.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:45.287Z,1516421325.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:45.683Z,1516421325.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:46.087Z,1516421326.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:46.483Z,1516421326.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:46.890Z,1516421326.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:47.283Z,1516421327.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:47.679Z,1516421327.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:48.090Z,1516421328.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:48.490Z,1516421328.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:48.881Z,1516421328.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:49.283Z,1516421329.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:49.683Z,1516421329.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:50.090Z,1516421330.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:50.487Z,1516421330.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:50.883Z,1516421330.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:51.284Z,1516421331.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:51.687Z,1516421331.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:52.088Z,1516421332.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:52.472Z,1516421332.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:52.887Z,1516421332.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:53.276Z,1516421333.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:53.676Z,1516421333.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:54.091Z,1516421334.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:54.458Z,1516421334.458 [NAL9602](INFO): NAL9602 initialized
2018-01-20T04:08:54.475Z,1516421334.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:54.876Z,1516421334.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:55.266Z,1516421335.266 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T04:08:55.266Z,1516421335.266 [NAL9602] Data Fault, FailCount= 4
2018-01-20T04:08:55.266Z,1516421335.266 [NAL9602](ERROR): Data Fault
2018-01-20T04:08:55.310Z,1516421335.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:55.364Z,1516421335.364 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T04:08:55.658Z,1516421335.658 [NAL9602](INFO): Powering down
2018-01-20T04:08:55.676Z,1516421335.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:56.075Z,1516421336.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:56.479Z,1516421336.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:56.537Z,1516421336.537 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T04:08:56.537Z,1516421336.537 [NAL9602] No Fault, FailCount= 4
2018-01-20T04:08:56.880Z,1516421336.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:57.281Z,1516421337.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:57.680Z,1516421337.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:58.081Z,1516421338.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:58.480Z,1516421338.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:58.886Z,1516421338.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:59.282Z,1516421339.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:08:59.686Z,1516421339.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:00.086Z,1516421340.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:00.488Z,1516421340.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:00.880Z,1516421340.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:01.286Z,1516421341.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:01.683Z,1516421341.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:02.087Z,1516421342.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:02.491Z,1516421342.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:02.887Z,1516421342.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:03.272Z,1516421343.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:03.690Z,1516421343.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:04.075Z,1516421344.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:04.477Z,1516421344.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:04.880Z,1516421344.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:05.279Z,1516421345.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:05.676Z,1516421345.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:06.082Z,1516421346.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:06.484Z,1516421346.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:06.881Z,1516421346.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:07.280Z,1516421347.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:07.679Z,1516421347.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:08.081Z,1516421348.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:08.483Z,1516421348.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:08.884Z,1516421348.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:09.281Z,1516421349.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:09.682Z,1516421349.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:10.085Z,1516421350.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:10.484Z,1516421350.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:10.888Z,1516421350.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:11.282Z,1516421351.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:11.686Z,1516421351.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:12.088Z,1516421352.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:12.490Z,1516421352.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:12.880Z,1516421352.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:13.286Z,1516421353.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:13.680Z,1516421353.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:14.075Z,1516421354.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:14.491Z,1516421354.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:14.878Z,1516421354.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:15.276Z,1516421355.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:15.674Z,1516421355.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:16.076Z,1516421356.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:16.485Z,1516421356.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:16.880Z,1516421356.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:17.277Z,1516421357.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:17.685Z,1516421357.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:18.081Z,1516421358.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:18.480Z,1516421358.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:18.879Z,1516421358.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:19.290Z,1516421359.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:19.683Z,1516421359.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:20.087Z,1516421360.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:20.483Z,1516421360.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:20.874Z,1516421360.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:21.286Z,1516421361.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:21.691Z,1516421361.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:22.075Z,1516421362.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:22.475Z,1516421362.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:22.875Z,1516421362.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:23.301Z,1516421363.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:23.724Z,1516421363.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:24.078Z,1516421364.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:24.182Z,1516421364.182 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T04:09:24.478Z,1516421364.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:24.879Z,1516421364.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:25.321Z,1516421365.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:25.662Z,1516421365.662 [NAL9602](INFO): Powering up NAL9602
2018-01-20T04:09:25.681Z,1516421365.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:26.098Z,1516421366.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:26.526Z,1516421366.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:33.010Z,1516421373.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:33.173Z,1516421373.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:33.545Z,1516421373.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:33.943Z,1516421373.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:34.347Z,1516421374.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:34.744Z,1516421374.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:35.140Z,1516421375.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:35.544Z,1516421375.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:35.944Z,1516421375.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:36.358Z,1516421376.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:36.730Z,1516421376.730 [NAL9602](INFO): NAL9602 initialized
2018-01-20T04:09:36.747Z,1516421376.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:37.144Z,1516421377.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:37.611Z,1516421377.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:37.976Z,1516421377.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:38.355Z,1516421378.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:38.745Z,1516421378.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:39.145Z,1516421379.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:39.546Z,1516421379.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:39.957Z,1516421379.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:40.366Z,1516421380.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:40.774Z,1516421380.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:41.145Z,1516421381.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:41.559Z,1516421381.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:41.949Z,1516421381.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:42.350Z,1516421382.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:42.750Z,1516421382.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:43.150Z,1516421383.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:43.552Z,1516421383.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:43.952Z,1516421383.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:44.360Z,1516421384.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:44.763Z,1516421384.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:45.167Z,1516421385.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:45.565Z,1516421385.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:45.958Z,1516421385.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:46.348Z,1516421386.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:46.743Z,1516421386.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:47.143Z,1516421387.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:47.547Z,1516421387.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:47.951Z,1516421387.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:48.348Z,1516421388.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:48.751Z,1516421388.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:49.148Z,1516421389.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:49.549Z,1516421389.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:49.966Z,1516421389.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:50.357Z,1516421390.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:50.761Z,1516421390.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:51.164Z,1516421391.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:51.543Z,1516421391.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:51.947Z,1516421391.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:52.343Z,1516421392.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:52.743Z,1516421392.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:53.142Z,1516421393.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:53.539Z,1516421393.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:53.947Z,1516421393.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:54.342Z,1516421394.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:54.747Z,1516421394.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:55.154Z,1516421395.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:55.554Z,1516421395.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:55.954Z,1516421395.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:56.354Z,1516421396.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:56.744Z,1516421396.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:57.151Z,1516421397.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:57.551Z,1516421397.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:57.950Z,1516421397.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:58.350Z,1516421398.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:58.751Z,1516421398.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:59.147Z,1516421399.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:59.554Z,1516421399.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:09:59.952Z,1516421399.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:00.358Z,1516421400.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:00.760Z,1516421400.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:01.163Z,1516421401.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:01.562Z,1516421401.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:01.957Z,1516421401.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:02.346Z,1516421402.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:02.755Z,1516421402.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:03.143Z,1516421403.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:03.547Z,1516421403.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:03.942Z,1516421403.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:04.343Z,1516421404.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:04.747Z,1516421404.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:05.138Z,1516421405.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:05.554Z,1516421405.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:05.962Z,1516421405.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:06.361Z,1516421406.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:06.762Z,1516421406.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:07.148Z,1516421407.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:07.551Z,1516421407.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:07.954Z,1516421407.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:08.355Z,1516421408.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:08.750Z,1516421408.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:09.150Z,1516421409.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:09.549Z,1516421409.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:09.954Z,1516421409.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:10.351Z,1516421410.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:10.761Z,1516421410.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:11.165Z,1516421411.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:11.566Z,1516421411.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:11.963Z,1516421411.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:12.342Z,1516421412.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:12.747Z,1516421412.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:13.143Z,1516421413.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:13.543Z,1516421413.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:13.947Z,1516421413.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:14.343Z,1516421414.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:14.743Z,1516421414.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:15.139Z,1516421415.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:15.543Z,1516421415.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:15.967Z,1516421415.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:16.362Z,1516421416.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:16.767Z,1516421416.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:17.162Z,1516421417.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:17.543Z,1516421417.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:17.944Z,1516421417.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:18.343Z,1516421418.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:18.747Z,1516421418.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:19.143Z,1516421419.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:19.542Z,1516421419.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:19.943Z,1516421419.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:20.347Z,1516421420.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:20.747Z,1516421420.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:21.162Z,1516421421.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:21.577Z,1516421421.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:21.966Z,1516421421.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:22.366Z,1516421422.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:22.755Z,1516421422.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:23.155Z,1516421423.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:23.547Z,1516421423.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:23.948Z,1516421423.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:24.350Z,1516421424.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:24.759Z,1516421424.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:25.151Z,1516421425.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:25.548Z,1516421425.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:25.956Z,1516421425.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:26.364Z,1516421426.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:26.759Z,1516421426.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:30.030Z,1516421430.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:30.171Z,1516421430.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:30.538Z,1516421430.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:30.939Z,1516421430.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:31.346Z,1516421431.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:31.746Z,1516421431.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:32.142Z,1516421432.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:32.546Z,1516421432.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:32.933Z,1516421432.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:33.334Z,1516421433.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:33.741Z,1516421433.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:34.140Z,1516421434.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:34.535Z,1516421434.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:34.943Z,1516421434.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:35.343Z,1516421435.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:35.722Z,1516421435.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:36.144Z,1516421436.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:36.550Z,1516421436.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:36.944Z,1516421436.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:37.355Z,1516421437.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:37.752Z,1516421437.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:38.138Z,1516421438.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:38.534Z,1516421438.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:38.935Z,1516421438.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:39.326Z,1516421439.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:39.731Z,1516421439.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:40.134Z,1516421440.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:40.531Z,1516421440.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:40.929Z,1516421440.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:41.342Z,1516421441.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:41.736Z,1516421441.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:42.147Z,1516421442.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:42.546Z,1516421442.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:42.944Z,1516421442.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:43.326Z,1516421443.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:43.736Z,1516421443.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:44.125Z,1516421444.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:44.529Z,1516421444.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:44.935Z,1516421444.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:45.326Z,1516421445.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:45.735Z,1516421445.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:46.132Z,1516421446.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:46.530Z,1516421446.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:46.945Z,1516421446.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:47.346Z,1516421447.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:47.730Z,1516421447.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:48.146Z,1516421448.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:48.537Z,1516421448.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:48.939Z,1516421448.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:49.343Z,1516421449.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:49.743Z,1516421449.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:50.144Z,1516421450.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:50.543Z,1516421450.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:50.943Z,1516421450.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:51.322Z,1516421451.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:51.743Z,1516421451.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:52.154Z,1516421452.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:52.547Z,1516421452.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:52.958Z,1516421452.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:53.354Z,1516421453.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:53.730Z,1516421453.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:54.131Z,1516421454.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:54.535Z,1516421454.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:54.931Z,1516421454.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:55.335Z,1516421455.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:55.733Z,1516421455.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:56.130Z,1516421456.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:56.532Z,1516421456.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:56.936Z,1516421456.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:57.342Z,1516421457.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:57.742Z,1516421457.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:58.146Z,1516421458.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:58.537Z,1516421458.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:58.939Z,1516421458.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:59.344Z,1516421459.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:10:59.722Z,1516421459.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:00.133Z,1516421460.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:00.542Z,1516421460.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:00.940Z,1516421460.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:01.343Z,1516421461.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:01.743Z,1516421461.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:02.140Z,1516421462.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:02.549Z,1516421462.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:02.949Z,1516421462.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:03.334Z,1516421463.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:03.757Z,1516421463.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:04.139Z,1516421464.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:04.534Z,1516421464.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:04.939Z,1516421464.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:05.338Z,1516421465.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:05.730Z,1516421465.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:06.135Z,1516421466.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:06.535Z,1516421466.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:06.935Z,1516421466.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:07.330Z,1516421467.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:07.746Z,1516421467.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:08.150Z,1516421468.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:08.550Z,1516421468.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:08.957Z,1516421468.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:09.334Z,1516421469.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:09.736Z,1516421469.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:10.141Z,1516421470.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:10.539Z,1516421470.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:10.943Z,1516421470.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:11.344Z,1516421471.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:11.737Z,1516421471.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:12.144Z,1516421472.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:12.540Z,1516421472.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:12.951Z,1516421472.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:13.350Z,1516421473.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:13.754Z,1516421473.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:14.147Z,1516421474.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:14.544Z,1516421474.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:14.946Z,1516421474.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:15.325Z,1516421475.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:15.735Z,1516421475.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:16.135Z,1516421476.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:16.527Z,1516421476.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:16.935Z,1516421476.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:17.339Z,1516421477.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:17.727Z,1516421477.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:18.141Z,1516421478.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:18.555Z,1516421478.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:18.942Z,1516421478.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:19.360Z,1516421479.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:19.737Z,1516421479.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:20.132Z,1516421480.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:20.540Z,1516421480.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:20.931Z,1516421480.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:21.334Z,1516421481.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:21.731Z,1516421481.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:22.137Z,1516421482.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:22.540Z,1516421482.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:22.942Z,1516421482.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:23.346Z,1516421483.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:23.747Z,1516421483.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:24.150Z,1516421484.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:24.554Z,1516421484.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:24.925Z,1516421484.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:25.332Z,1516421485.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:25.734Z,1516421485.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:26.139Z,1516421486.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:26.535Z,1516421486.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:26.939Z,1516421486.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:30.215Z,1516421490.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:30.342Z,1516421490.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:30.730Z,1516421490.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:31.122Z,1516421491.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:31.511Z,1516421491.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:31.908Z,1516421491.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:32.309Z,1516421492.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:32.703Z,1516421492.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:33.103Z,1516421493.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:33.500Z,1516421493.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:33.901Z,1516421493.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:34.304Z,1516421494.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:34.344Z,1516421494.344 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:11:34.344Z,1516421494.344 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2018-01-20T04:11:34.345Z,1516421494.345 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:11:34.365Z,1516421494.365 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:11:34.703Z,1516421494.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:34.772Z,1516421494.772 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:11:34.772Z,1516421494.772 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2018-01-20T04:11:35.129Z,1516421495.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:35.152Z,1516421495.152 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:11:35.152Z,1516421495.152 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:11:35.152Z,1516421495.152 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:11:35.530Z,1516421495.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:35.931Z,1516421495.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:36.331Z,1516421496.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:36.700Z,1516421496.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:37.106Z,1516421497.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:37.112Z,1516421497.112 [PNI_TCM](ERROR): CRC does not match. Expected:0x65360 got:0x27933
2018-01-20T04:11:37.506Z,1516421497.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:37.908Z,1516421497.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:38.306Z,1516421498.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:38.710Z,1516421498.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:39.113Z,1516421499.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:39.508Z,1516421499.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:39.915Z,1516421499.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:40.322Z,1516421500.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:40.721Z,1516421500.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:41.126Z,1516421501.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:41.528Z,1516421501.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:41.900Z,1516421501.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:42.318Z,1516421502.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:42.701Z,1516421502.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:43.099Z,1516421503.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:43.498Z,1516421503.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:43.909Z,1516421503.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:44.301Z,1516421504.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:44.703Z,1516421504.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:45.108Z,1516421505.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:45.511Z,1516421505.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:45.930Z,1516421505.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:46.314Z,1516421506.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:46.720Z,1516421506.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:47.104Z,1516421507.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:47.512Z,1516421507.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:47.904Z,1516421507.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:48.308Z,1516421508.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:48.713Z,1516421508.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:49.106Z,1516421509.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:49.515Z,1516421509.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:49.911Z,1516421509.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:49.920Z,1516421509.920 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2018-01-20T04:11:50.312Z,1516421510.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:50.319Z,1516421510.319 [PNI_TCM](ERROR): CRC does not match. Expected:0x61388 got:0x16823
2018-01-20T04:11:50.726Z,1516421510.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:51.118Z,1516421511.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:51.524Z,1516421511.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:51.531Z,1516421511.531 [PNI_TCM](ERROR): CRC does not match. Expected:0x53138 got:0x17164
2018-01-20T04:11:51.927Z,1516421511.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:52.317Z,1516421512.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:52.711Z,1516421512.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:53.107Z,1516421513.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:53.506Z,1516421513.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:53.910Z,1516421513.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:54.309Z,1516421514.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:54.707Z,1516421514.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:55.107Z,1516421515.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:55.511Z,1516421515.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:55.913Z,1516421515.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:56.328Z,1516421516.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:56.723Z,1516421516.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:57.123Z,1516421517.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:57.507Z,1516421517.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:57.915Z,1516421517.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:58.299Z,1516421518.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:58.720Z,1516421518.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:59.115Z,1516421519.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:59.514Z,1516421519.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:11:59.917Z,1516421519.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:00.302Z,1516421520.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:00.707Z,1516421520.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:01.127Z,1516421521.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:01.528Z,1516421521.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:01.930Z,1516421521.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:02.334Z,1516421522.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:02.703Z,1516421522.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:03.111Z,1516421523.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:03.513Z,1516421523.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:03.914Z,1516421523.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:04.306Z,1516421524.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:04.716Z,1516421524.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:05.111Z,1516421525.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:05.515Z,1516421525.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:05.916Z,1516421525.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:06.322Z,1516421526.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:06.727Z,1516421526.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:07.127Z,1516421527.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:07.522Z,1516421527.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:07.899Z,1516421527.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:08.303Z,1516421528.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:08.707Z,1516421528.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:09.099Z,1516421529.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:09.504Z,1516421529.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:09.908Z,1516421529.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:10.299Z,1516421530.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:10.704Z,1516421530.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:11.118Z,1516421531.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:11.528Z,1516421531.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:11.902Z,1516421531.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:12.302Z,1516421532.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:12.699Z,1516421532.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:13.103Z,1516421533.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:13.526Z,1516421533.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:13.910Z,1516421533.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:14.306Z,1516421534.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:14.715Z,1516421534.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:15.103Z,1516421535.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:15.501Z,1516421535.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:15.911Z,1516421535.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:16.303Z,1516421536.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:16.701Z,1516421536.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:17.110Z,1516421537.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:17.509Z,1516421537.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:17.906Z,1516421537.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:18.316Z,1516421538.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:18.708Z,1516421538.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:19.114Z,1516421539.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:19.508Z,1516421539.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:19.918Z,1516421539.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:20.296Z,1516421540.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:20.708Z,1516421540.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:21.099Z,1516421541.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:21.500Z,1516421541.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:21.903Z,1516421541.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:22.310Z,1516421542.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:22.710Z,1516421542.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:23.111Z,1516421543.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:23.508Z,1516421543.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:23.904Z,1516421543.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:24.315Z,1516421544.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:24.712Z,1516421544.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:25.111Z,1516421545.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:25.510Z,1516421545.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:25.906Z,1516421545.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:26.307Z,1516421546.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:26.329Z,1516421546.329 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T04:07:26.1Z
2018-01-20T04:12:26.329Z,1516421546.329 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T04:12:26.329Z,1516421546.329 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T04:12:26.721Z,1516421546.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:27.178Z,1516421547.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:30.382Z,1516421550.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:30.485Z,1516421550.485 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0180.lzma
2018-01-20T04:12:30.515Z,1516421550.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:30.882Z,1516421550.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:31.248Z,1516421551.248 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0180.lzma.bak
2018-01-20T04:12:31.248Z,1516421551.248 [DataOverHttps](INFO): SBD MOMSN=7726236
2018-01-20T04:12:31.313Z,1516421551.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:31.788Z,1516421551.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:32.072Z,1516421552.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:35.367Z,1516421555.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:35.510Z,1516421555.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:35.843Z,1516421555.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:36.253Z,1516421556.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:36.636Z,1516421556.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:37.041Z,1516421557.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:40.326Z,1516421560.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:40.439Z,1516421560.439 [DataOverHttps](INFO): Sending 253 bytes from file Logs/20180119T210901/Express0181.lzma
2018-01-20T04:12:40.471Z,1516421560.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:40.811Z,1516421560.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:41.183Z,1516421561.183 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0181.lzma.bak
2018-01-20T04:12:41.184Z,1516421561.184 [DataOverHttps](INFO): SBD MOMSN=7726238
2018-01-20T04:12:41.219Z,1516421561.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:41.718Z,1516421561.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:41.771Z,1516421561.771 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T04:12:41.771Z,1516421561.771 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T04:12:41.771Z,1516421561.771 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T04:12:42.012Z,1516421562.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:45.374Z,1516421565.374 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T04:12:45.392Z,1516421565.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:45.523Z,1516421565.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:45.881Z,1516421565.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:46.283Z,1516421566.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:46.675Z,1516421566.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:47.081Z,1516421567.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:47.478Z,1516421567.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:47.878Z,1516421567.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:48.281Z,1516421568.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:48.678Z,1516421568.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:49.078Z,1516421569.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:49.487Z,1516421569.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:49.884Z,1516421569.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:50.280Z,1516421570.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:50.678Z,1516421570.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:51.087Z,1516421571.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:51.480Z,1516421571.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:51.884Z,1516421571.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:52.287Z,1516421572.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:52.681Z,1516421572.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:53.082Z,1516421573.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:53.479Z,1516421573.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:53.881Z,1516421573.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:54.275Z,1516421574.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:54.684Z,1516421574.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:55.084Z,1516421575.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:55.483Z,1516421575.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:55.879Z,1516421575.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:56.268Z,1516421576.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:56.670Z,1516421576.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:57.071Z,1516421577.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:57.471Z,1516421577.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:57.874Z,1516421577.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:58.271Z,1516421578.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:58.671Z,1516421578.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:59.070Z,1516421579.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:59.471Z,1516421579.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:12:59.871Z,1516421579.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:00.274Z,1516421580.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:00.671Z,1516421580.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:01.071Z,1516421581.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:01.478Z,1516421581.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:01.878Z,1516421581.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:02.272Z,1516421582.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:02.674Z,1516421582.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:03.072Z,1516421583.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:03.468Z,1516421583.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:03.870Z,1516421583.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:04.272Z,1516421584.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:04.672Z,1516421584.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:05.079Z,1516421585.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:05.480Z,1516421585.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:05.878Z,1516421585.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:06.277Z,1516421586.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:06.678Z,1516421586.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:07.078Z,1516421587.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:07.482Z,1516421587.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:07.878Z,1516421587.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:08.283Z,1516421588.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:08.683Z,1516421588.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:09.071Z,1516421589.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:09.468Z,1516421589.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:09.886Z,1516421589.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:10.271Z,1516421590.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:10.672Z,1516421590.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:11.070Z,1516421591.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:11.475Z,1516421591.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:11.871Z,1516421591.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:12.274Z,1516421592.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:12.675Z,1516421592.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:13.072Z,1516421593.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:13.470Z,1516421593.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:13.875Z,1516421593.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:14.271Z,1516421594.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:14.674Z,1516421594.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:15.079Z,1516421595.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:15.472Z,1516421595.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:15.865Z,1516421595.865 [NAL9602](INFO): Powering down
2018-01-20T04:13:15.885Z,1516421595.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:16.279Z,1516421596.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:16.675Z,1516421596.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:17.078Z,1516421597.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:17.484Z,1516421597.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:17.879Z,1516421597.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:18.284Z,1516421598.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:18.684Z,1516421598.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:19.123Z,1516421599.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:19.478Z,1516421599.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:19.887Z,1516421599.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:20.274Z,1516421600.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:20.670Z,1516421600.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:21.075Z,1516421601.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:21.478Z,1516421601.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:21.878Z,1516421601.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:22.291Z,1516421602.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:22.679Z,1516421602.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:23.078Z,1516421603.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:23.481Z,1516421603.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:23.879Z,1516421603.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:24.286Z,1516421604.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:24.684Z,1516421604.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:25.079Z,1516421605.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:25.477Z,1516421605.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:25.888Z,1516421605.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:26.271Z,1516421606.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:26.679Z,1516421606.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:27.079Z,1516421607.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:27.470Z,1516421607.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:27.870Z,1516421607.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:28.275Z,1516421608.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:28.671Z,1516421608.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:29.078Z,1516421609.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:29.473Z,1516421609.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:29.875Z,1516421609.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:30.275Z,1516421610.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:30.680Z,1516421610.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:31.087Z,1516421611.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:31.482Z,1516421611.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:31.878Z,1516421611.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:32.285Z,1516421612.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:32.682Z,1516421612.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:33.078Z,1516421613.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:33.478Z,1516421613.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:33.882Z,1516421613.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:34.278Z,1516421614.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:34.678Z,1516421614.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:35.078Z,1516421615.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:35.475Z,1516421615.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:35.878Z,1516421615.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:36.278Z,1516421616.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:36.675Z,1516421616.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:37.101Z,1516421617.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:37.482Z,1516421617.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:37.876Z,1516421617.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:38.276Z,1516421618.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:38.675Z,1516421618.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:39.076Z,1516421619.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:39.486Z,1516421619.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:39.914Z,1516421619.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:40.290Z,1516421620.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:40.692Z,1516421620.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:41.082Z,1516421621.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:41.483Z,1516421621.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:41.880Z,1516421621.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:42.285Z,1516421622.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:48.927Z,1516421628.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:49.141Z,1516421629.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:49.507Z,1516421629.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:49.925Z,1516421629.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:50.316Z,1516421630.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:50.715Z,1516421630.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:51.118Z,1516421631.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:51.518Z,1516421631.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:51.907Z,1516421631.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:52.300Z,1516421632.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:52.711Z,1516421632.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:53.102Z,1516421633.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:53.500Z,1516421633.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:53.907Z,1516421633.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:54.310Z,1516421634.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:54.710Z,1516421634.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:55.111Z,1516421635.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:55.507Z,1516421635.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:55.904Z,1516421635.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:56.307Z,1516421636.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:56.715Z,1516421636.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:57.110Z,1516421637.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:57.511Z,1516421637.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:57.911Z,1516421637.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:58.308Z,1516421638.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:58.716Z,1516421638.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:59.115Z,1516421639.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:59.510Z,1516421639.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:13:59.910Z,1516421639.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:00.313Z,1516421640.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:00.712Z,1516421640.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:01.113Z,1516421641.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:01.519Z,1516421641.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:01.910Z,1516421641.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:02.319Z,1516421642.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:02.710Z,1516421642.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:03.119Z,1516421643.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:03.519Z,1516421643.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:03.907Z,1516421643.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:04.307Z,1516421644.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:04.715Z,1516421644.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:05.111Z,1516421645.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:05.511Z,1516421645.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:05.912Z,1516421645.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:06.315Z,1516421646.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:06.717Z,1516421646.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:07.111Z,1516421647.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:07.507Z,1516421647.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:07.903Z,1516421647.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:08.311Z,1516421648.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:08.707Z,1516421648.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:09.110Z,1516421649.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:09.504Z,1516421649.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:09.915Z,1516421649.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:10.303Z,1516421650.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:10.705Z,1516421650.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:11.107Z,1516421651.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:11.511Z,1516421651.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:11.908Z,1516421651.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:12.319Z,1516421652.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:12.714Z,1516421652.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:13.112Z,1516421653.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:13.509Z,1516421653.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:13.903Z,1516421653.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:14.303Z,1516421654.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:14.727Z,1516421654.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:15.103Z,1516421655.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:15.503Z,1516421655.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:15.907Z,1516421655.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:16.303Z,1516421656.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:16.700Z,1516421656.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:17.107Z,1516421657.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:17.503Z,1516421657.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:17.899Z,1516421657.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:18.312Z,1516421658.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:18.709Z,1516421658.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:19.110Z,1516421659.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:19.512Z,1516421659.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:19.910Z,1516421659.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:20.310Z,1516421660.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:20.714Z,1516421660.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:21.110Z,1516421661.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:21.512Z,1516421661.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:21.913Z,1516421661.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:22.314Z,1516421662.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:22.710Z,1516421662.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:23.113Z,1516421663.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:23.518Z,1516421663.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:23.910Z,1516421663.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:24.309Z,1516421664.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:24.718Z,1516421664.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:25.110Z,1516421665.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:25.510Z,1516421665.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:25.918Z,1516421665.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:26.304Z,1516421666.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:26.710Z,1516421666.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:27.103Z,1516421667.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:27.500Z,1516421667.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:27.907Z,1516421667.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:28.303Z,1516421668.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:28.700Z,1516421668.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:29.107Z,1516421669.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:29.503Z,1516421669.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:29.904Z,1516421669.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:30.307Z,1516421670.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:30.710Z,1516421670.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:31.110Z,1516421671.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:31.511Z,1516421671.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:31.911Z,1516421671.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:32.307Z,1516421672.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:32.719Z,1516421672.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:33.113Z,1516421673.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:33.511Z,1516421673.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:33.909Z,1516421673.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:34.310Z,1516421674.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:34.710Z,1516421674.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:35.115Z,1516421675.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:35.513Z,1516421675.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:35.532Z,1516421675.532 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:14:35.532Z,1516421675.532 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46
2018-01-20T04:14:35.532Z,1516421675.532 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:14:35.544Z,1516421675.544 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:14:35.914Z,1516421675.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:35.948Z,1516421675.948 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:14:35.948Z,1516421675.948 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46
2018-01-20T04:14:36.309Z,1516421676.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:36.355Z,1516421676.355 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:14:36.355Z,1516421676.355 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:14:36.356Z,1516421676.356 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:14:36.718Z,1516421676.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:37.118Z,1516421677.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:37.510Z,1516421677.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:37.918Z,1516421677.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:38.304Z,1516421678.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:38.711Z,1516421678.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:39.103Z,1516421679.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:39.504Z,1516421679.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:39.907Z,1516421679.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:40.303Z,1516421680.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:40.704Z,1516421680.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:41.115Z,1516421681.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:41.515Z,1516421681.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:41.909Z,1516421681.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:42.310Z,1516421682.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:45.590Z,1516421685.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:45.719Z,1516421685.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:46.067Z,1516421686.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:46.474Z,1516421686.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:46.866Z,1516421686.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:47.269Z,1516421687.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:47.659Z,1516421687.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:48.059Z,1516421688.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:48.479Z,1516421688.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:48.859Z,1516421688.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:49.263Z,1516421689.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:49.667Z,1516421689.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:50.059Z,1516421690.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:50.458Z,1516421690.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:50.863Z,1516421690.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:51.259Z,1516421691.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:51.660Z,1516421691.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:52.071Z,1516421692.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:52.463Z,1516421692.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:52.863Z,1516421692.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:53.268Z,1516421693.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:53.666Z,1516421693.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:54.067Z,1516421694.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:54.466Z,1516421694.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:54.866Z,1516421694.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:55.270Z,1516421695.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:55.666Z,1516421695.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:56.059Z,1516421696.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:56.458Z,1516421696.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:56.863Z,1516421696.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:57.259Z,1516421697.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:57.660Z,1516421697.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:58.063Z,1516421698.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:58.459Z,1516421698.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:58.860Z,1516421698.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:59.267Z,1516421699.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:14:59.663Z,1516421699.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:00.070Z,1516421700.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:00.471Z,1516421700.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:00.868Z,1516421700.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:01.263Z,1516421701.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:01.670Z,1516421701.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:02.067Z,1516421702.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:02.456Z,1516421702.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:02.875Z,1516421702.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:03.263Z,1516421703.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:03.663Z,1516421703.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:04.063Z,1516421704.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:04.459Z,1516421704.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:04.859Z,1516421704.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:05.258Z,1516421705.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:05.659Z,1516421705.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:06.066Z,1516421706.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:06.470Z,1516421706.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:06.867Z,1516421706.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:07.264Z,1516421707.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:07.668Z,1516421707.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:08.066Z,1516421708.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:08.469Z,1516421708.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:08.872Z,1516421708.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:09.259Z,1516421709.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:09.656Z,1516421709.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:10.058Z,1516421710.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:10.459Z,1516421710.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:10.858Z,1516421710.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:11.266Z,1516421711.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:11.659Z,1516421711.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:12.059Z,1516421712.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:12.458Z,1516421712.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:12.859Z,1516421712.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:13.260Z,1516421713.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:13.662Z,1516421713.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:14.066Z,1516421714.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:14.456Z,1516421714.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:14.867Z,1516421714.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:15.267Z,1516421715.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:15.663Z,1516421715.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:16.070Z,1516421716.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:16.463Z,1516421716.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:16.864Z,1516421716.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:17.274Z,1516421717.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:17.671Z,1516421717.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:18.071Z,1516421718.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:18.469Z,1516421718.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:18.866Z,1516421718.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:19.256Z,1516421719.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:19.674Z,1516421719.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:20.059Z,1516421720.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:20.460Z,1516421720.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:20.882Z,1516421720.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:21.266Z,1516421721.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:21.660Z,1516421721.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:22.058Z,1516421722.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:22.466Z,1516421722.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:22.860Z,1516421722.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:23.270Z,1516421723.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:23.666Z,1516421723.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:24.067Z,1516421724.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:24.469Z,1516421724.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:24.866Z,1516421724.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:25.267Z,1516421725.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:25.670Z,1516421725.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:26.075Z,1516421726.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:26.456Z,1516421726.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:26.874Z,1516421726.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:27.263Z,1516421727.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:27.659Z,1516421727.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:28.063Z,1516421728.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:28.463Z,1516421728.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:28.859Z,1516421728.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:29.266Z,1516421729.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:29.663Z,1516421729.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:30.066Z,1516421730.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:30.482Z,1516421730.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:30.863Z,1516421730.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:31.259Z,1516421731.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:31.658Z,1516421731.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:32.067Z,1516421732.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:32.459Z,1516421732.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:32.858Z,1516421732.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:33.263Z,1516421733.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:33.660Z,1516421733.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:34.062Z,1516421734.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:34.467Z,1516421734.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:34.870Z,1516421734.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:35.275Z,1516421735.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:35.671Z,1516421735.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:36.066Z,1516421736.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:36.466Z,1516421736.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:36.875Z,1516421736.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:37.267Z,1516421737.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:37.671Z,1516421737.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:38.066Z,1516421738.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:38.463Z,1516421738.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:38.859Z,1516421738.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:39.264Z,1516421739.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:39.659Z,1516421739.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:40.083Z,1516421740.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:40.463Z,1516421740.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:40.859Z,1516421740.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:41.262Z,1516421741.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:41.660Z,1516421741.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:42.063Z,1516421742.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:42.475Z,1516421742.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:45.744Z,1516421745.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:45.869Z,1516421745.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:46.216Z,1516421746.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:46.623Z,1516421746.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:47.014Z,1516421747.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:47.417Z,1516421747.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:47.820Z,1516421747.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:48.215Z,1516421748.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:48.613Z,1516421748.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:49.021Z,1516421749.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:49.415Z,1516421749.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:49.827Z,1516421749.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:50.223Z,1516421750.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:50.619Z,1516421750.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:51.017Z,1516421751.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:51.419Z,1516421751.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:51.811Z,1516421751.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:52.215Z,1516421752.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:52.620Z,1516421752.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:53.011Z,1516421753.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:53.421Z,1516421753.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:53.821Z,1516421753.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:54.215Z,1516421754.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:54.617Z,1516421754.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:55.015Z,1516421755.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:55.418Z,1516421755.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:55.818Z,1516421755.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:56.222Z,1516421756.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:56.607Z,1516421756.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:57.015Z,1516421757.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:57.408Z,1516421757.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:57.815Z,1516421757.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:58.206Z,1516421758.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:58.608Z,1516421758.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:59.011Z,1516421759.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:59.418Z,1516421759.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:15:59.806Z,1516421759.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:00.216Z,1516421760.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:00.622Z,1516421760.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:01.023Z,1516421761.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:01.415Z,1516421761.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:01.814Z,1516421761.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:02.215Z,1516421762.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:02.607Z,1516421762.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:03.023Z,1516421763.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:03.407Z,1516421763.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:03.807Z,1516421763.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:04.222Z,1516421764.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:04.604Z,1516421764.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:05.007Z,1516421765.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:05.406Z,1516421765.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:05.808Z,1516421765.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:06.211Z,1516421766.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:06.618Z,1516421766.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:07.014Z,1516421767.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:07.418Z,1516421767.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:07.822Z,1516421767.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:08.219Z,1516421768.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:08.619Z,1516421768.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:09.014Z,1516421769.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:09.414Z,1516421769.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:09.814Z,1516421769.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:10.214Z,1516421770.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:10.614Z,1516421770.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:11.014Z,1516421771.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:11.418Z,1516421771.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:11.814Z,1516421771.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:12.214Z,1516421772.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:12.614Z,1516421772.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:13.018Z,1516421773.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:13.414Z,1516421773.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:13.814Z,1516421773.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:14.214Z,1516421774.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:14.614Z,1516421774.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:15.018Z,1516421775.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:15.411Z,1516421775.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:15.818Z,1516421775.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:16.214Z,1516421776.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:16.611Z,1516421776.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:17.021Z,1516421777.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:17.414Z,1516421777.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:17.816Z,1516421777.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:18.224Z,1516421778.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:18.617Z,1516421778.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:19.023Z,1516421779.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:19.417Z,1516421779.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:19.814Z,1516421779.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:20.214Z,1516421780.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:20.614Z,1516421780.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:21.014Z,1516421781.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:21.404Z,1516421781.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:21.811Z,1516421781.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:22.214Z,1516421782.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:22.608Z,1516421782.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:23.012Z,1516421783.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:23.411Z,1516421783.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:23.808Z,1516421783.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:24.211Z,1516421784.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:24.619Z,1516421784.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:25.014Z,1516421785.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:25.419Z,1516421785.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:25.819Z,1516421785.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:26.214Z,1516421786.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:26.616Z,1516421786.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:27.020Z,1516421787.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:27.416Z,1516421787.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:27.823Z,1516421787.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:28.224Z,1516421788.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:28.614Z,1516421788.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:29.024Z,1516421789.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:29.414Z,1516421789.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:29.808Z,1516421789.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:30.223Z,1516421790.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:30.614Z,1516421790.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:31.014Z,1516421791.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:31.415Z,1516421791.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:31.811Z,1516421791.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:32.207Z,1516421792.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:32.611Z,1516421792.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:33.011Z,1516421793.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:33.411Z,1516421793.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:33.808Z,1516421793.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:34.211Z,1516421794.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:34.614Z,1516421794.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:35.007Z,1516421795.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:35.411Z,1516421795.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:35.811Z,1516421795.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:36.219Z,1516421796.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:36.619Z,1516421796.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:37.019Z,1516421797.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:37.414Z,1516421797.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:37.814Z,1516421797.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:38.215Z,1516421798.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:38.615Z,1516421798.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:39.017Z,1516421799.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:39.420Z,1516421799.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:39.815Z,1516421799.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:40.224Z,1516421800.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:40.615Z,1516421800.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:41.023Z,1516421801.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:41.422Z,1516421801.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:41.815Z,1516421801.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:42.215Z,1516421802.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:42.612Z,1516421802.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:45.885Z,1516421805.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:46.013Z,1516421806.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:46.354Z,1516421806.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:46.755Z,1516421806.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:47.160Z,1516421807.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:47.557Z,1516421807.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:47.964Z,1516421807.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:48.348Z,1516421808.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:48.752Z,1516421808.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:49.147Z,1516421809.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:49.547Z,1516421809.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:49.951Z,1516421809.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:50.347Z,1516421810.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:50.748Z,1516421810.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:51.151Z,1516421811.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:51.551Z,1516421811.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:51.952Z,1516421811.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:52.359Z,1516421812.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:52.759Z,1516421812.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:53.155Z,1516421813.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:53.566Z,1516421813.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:53.955Z,1516421813.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:54.355Z,1516421814.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:54.769Z,1516421814.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:55.147Z,1516421815.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:55.547Z,1516421815.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:55.954Z,1516421815.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:56.347Z,1516421816.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:56.744Z,1516421816.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:57.151Z,1516421817.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:57.547Z,1516421817.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:57.948Z,1516421817.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:58.355Z,1516421818.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:58.747Z,1516421818.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:59.154Z,1516421819.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:59.551Z,1516421819.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:16:59.955Z,1516421819.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:00.348Z,1516421820.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:00.751Z,1516421820.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:01.151Z,1516421821.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:01.548Z,1516421821.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:01.958Z,1516421821.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:02.351Z,1516421822.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:02.754Z,1516421822.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:03.155Z,1516421823.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:03.554Z,1516421823.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:03.955Z,1516421823.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:04.353Z,1516421824.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:04.747Z,1516421824.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:05.144Z,1516421825.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:05.563Z,1516421825.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:05.947Z,1516421825.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:06.344Z,1516421826.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:06.751Z,1516421826.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:07.147Z,1516421827.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:07.548Z,1516421827.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:07.953Z,1516421827.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:08.347Z,1516421828.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:08.751Z,1516421828.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:09.159Z,1516421829.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:09.558Z,1516421829.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:09.952Z,1516421829.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:10.357Z,1516421830.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:10.754Z,1516421830.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:11.154Z,1516421831.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:11.555Z,1516421831.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:11.951Z,1516421831.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:12.354Z,1516421832.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:12.762Z,1516421832.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:13.154Z,1516421833.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:13.544Z,1516421833.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:13.954Z,1516421833.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:14.362Z,1516421834.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:14.748Z,1516421834.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:15.155Z,1516421835.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:15.551Z,1516421835.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:15.948Z,1516421835.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:16.355Z,1516421836.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:16.751Z,1516421836.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:17.158Z,1516421837.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:17.559Z,1516421837.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:17.954Z,1516421837.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:18.355Z,1516421838.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:18.754Z,1516421838.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:19.159Z,1516421839.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:19.559Z,1516421839.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:19.958Z,1516421839.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:20.355Z,1516421840.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:20.755Z,1516421840.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:21.159Z,1516421841.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:21.555Z,1516421841.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:21.944Z,1516421841.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:22.364Z,1516421842.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:22.747Z,1516421842.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:23.147Z,1516421843.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:23.551Z,1516421843.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:23.947Z,1516421843.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:24.344Z,1516421844.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:24.751Z,1516421844.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:25.147Z,1516421845.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:25.548Z,1516421845.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:25.959Z,1516421845.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:26.356Z,1516421846.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:26.748Z,1516421846.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:27.157Z,1516421847.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:27.554Z,1516421847.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:27.957Z,1516421847.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:28.359Z,1516421848.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:28.754Z,1516421848.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:29.155Z,1516421849.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:29.558Z,1516421849.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:29.951Z,1516421849.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:30.355Z,1516421850.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:30.759Z,1516421850.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:31.159Z,1516421851.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:31.559Z,1516421851.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:31.963Z,1516421851.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:32.356Z,1516421852.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:32.757Z,1516421852.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:33.154Z,1516421853.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:33.547Z,1516421853.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:33.944Z,1516421853.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:34.346Z,1516421854.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:34.754Z,1516421854.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:35.154Z,1516421855.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:35.563Z,1516421855.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:35.955Z,1516421855.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:36.348Z,1516421856.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:36.375Z,1516421856.375 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:17:36.375Z,1516421856.375 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47
2018-01-20T04:17:36.375Z,1516421856.375 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:17:36.405Z,1516421856.405 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:17:36.750Z,1516421856.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:36.809Z,1516421856.809 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:17:36.809Z,1516421856.809 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47
2018-01-20T04:17:37.154Z,1516421857.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:37.199Z,1516421857.199 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:17:37.200Z,1516421857.200 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:17:37.200Z,1516421857.200 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:17:37.548Z,1516421857.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:37.958Z,1516421857.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:38.354Z,1516421858.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:38.751Z,1516421858.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:39.155Z,1516421859.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:39.559Z,1516421859.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:39.957Z,1516421859.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:40.362Z,1516421860.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:40.754Z,1516421860.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:41.154Z,1516421861.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:41.561Z,1516421861.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:41.962Z,1516421861.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:42.352Z,1516421862.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:42.376Z,1516421862.376 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T04:17:42.377Z,1516421862.377 [Default:CheckIn:C.Wait] Stopped
2018-01-20T04:17:42.377Z,1516421862.377 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T04:17:42.377Z,1516421862.377 [Default:CheckIn:D] Running Loop=1
2018-01-20T04:17:42.760Z,1516421862.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:42.785Z,1516421862.785 [Default:CheckIn:D] Stopped
2018-01-20T04:17:42.785Z,1516421862.785 [Default:CheckIn:E] Running Loop=1
2018-01-20T04:17:46.038Z,1516421866.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:46.071Z,1516421866.071 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 134.102661 min 
2018-01-20T04:17:46.071Z,1516421866.071 [Default:CheckIn:E] Stopped
2018-01-20T04:17:46.071Z,1516421866.071 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T04:17:46.072Z,1516421866.072 [Default:CheckIn] Stopped
2018-01-20T04:17:46.072Z,1516421866.072 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T04:17:46.072Z,1516421866.072 [Default:CheckIn](INFO): Running loop #14
2018-01-20T04:17:46.072Z,1516421866.072 [Default:CheckIn] Running Loop=14
2018-01-20T04:17:46.072Z,1516421866.072 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T04:17:46.072Z,1516421866.072 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T04:17:46.205Z,1516421866.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:46.511Z,1516421866.511 [NAL9602](INFO): Powering up
2018-01-20T04:17:46.528Z,1516421866.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:46.930Z,1516421866.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:47.321Z,1516421867.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:47.723Z,1516421867.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:48.111Z,1516421868.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:48.508Z,1516421868.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:48.919Z,1516421868.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:49.319Z,1516421869.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:49.711Z,1516421869.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:50.119Z,1516421870.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:50.511Z,1516421870.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:50.912Z,1516421870.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:51.314Z,1516421871.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:51.719Z,1516421871.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:52.124Z,1516421872.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:52.526Z,1516421872.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:52.926Z,1516421872.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:53.312Z,1516421873.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:53.714Z,1516421873.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:54.112Z,1516421874.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:54.512Z,1516421874.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:54.918Z,1516421874.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:55.319Z,1516421875.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:55.715Z,1516421875.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:56.110Z,1516421876.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:56.515Z,1516421876.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:56.915Z,1516421876.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:57.330Z,1516421877.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:57.702Z,1516421877.702 [NAL9602](INFO): NAL9602 initialized
2018-01-20T04:17:57.719Z,1516421877.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:58.115Z,1516421878.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:58.539Z,1516421878.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:58.942Z,1516421878.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:59.322Z,1516421879.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:17:59.719Z,1516421879.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:00.119Z,1516421880.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:00.516Z,1516421880.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:00.919Z,1516421880.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:01.320Z,1516421881.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:01.724Z,1516421881.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:02.127Z,1516421882.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:02.526Z,1516421882.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:02.925Z,1516421882.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:03.324Z,1516421883.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:03.727Z,1516421883.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:04.123Z,1516421884.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:04.517Z,1516421884.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:04.919Z,1516421884.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:05.315Z,1516421885.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:05.719Z,1516421885.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:06.131Z,1516421886.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:06.519Z,1516421886.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:06.919Z,1516421886.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:07.320Z,1516421887.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:07.714Z,1516421887.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:08.113Z,1516421888.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:08.519Z,1516421888.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:08.915Z,1516421888.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:09.318Z,1516421889.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:09.718Z,1516421889.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:10.115Z,1516421890.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:10.515Z,1516421890.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:10.918Z,1516421890.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:11.313Z,1516421891.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:11.716Z,1516421891.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:12.119Z,1516421892.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:12.511Z,1516421892.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:12.913Z,1516421892.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:12.919Z,1516421892.919 [PNI_TCM](ERROR): CRC does not match. Expected:0x11951 got:0x5909
2018-01-20T04:18:13.317Z,1516421893.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:13.719Z,1516421893.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:14.121Z,1516421894.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:14.518Z,1516421894.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:14.918Z,1516421894.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:15.319Z,1516421895.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:15.726Z,1516421895.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:16.131Z,1516421896.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:16.535Z,1516421896.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:16.928Z,1516421896.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:17.339Z,1516421897.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:17.728Z,1516421897.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:18.126Z,1516421898.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:18.513Z,1516421898.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:18.919Z,1516421898.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:19.317Z,1516421899.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:19.325Z,1516421899.325 [PNI_TCM](ERROR): CRC does not match. Expected:0x43692 got:0x49484
2018-01-20T04:18:19.721Z,1516421899.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:20.118Z,1516421900.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:20.514Z,1516421900.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:20.922Z,1516421900.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:21.318Z,1516421901.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:21.711Z,1516421901.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:22.129Z,1516421902.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:22.530Z,1516421902.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:22.913Z,1516421902.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:23.325Z,1516421903.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:23.724Z,1516421903.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:24.130Z,1516421904.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:24.138Z,1516421904.138 [PNI_TCM](ERROR): CRC does not match. Expected:0x7898 got:0x18712
2018-01-20T04:18:24.531Z,1516421904.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:24.926Z,1516421904.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:25.314Z,1516421905.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:25.732Z,1516421905.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:26.125Z,1516421906.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:26.511Z,1516421906.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:26.919Z,1516421906.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:27.319Z,1516421907.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:27.342Z,1516421907.342 [PNI_TCM](ERROR): CRC does not match. Expected:0x61990 got:0x19532
2018-01-20T04:18:27.710Z,1516421907.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:28.113Z,1516421908.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:28.120Z,1516421908.120 [PNI_TCM](ERROR): CRC does not match. Expected:0x59043 got:0x6336
2018-01-20T04:18:28.519Z,1516421908.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:28.913Z,1516421908.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:29.315Z,1516421909.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:29.694Z,1516421909.694 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-01-20T04:18:29.773Z,1516421909.773 [NAL9602](FAULT): received: 
+CSQ:0

OK62, 2, 0, 0, 0

OK
2018-01-20T04:18:29.773Z,1516421909.773 [NAL9602] Data Fault, FailCount= 5
2018-01-20T04:18:29.773Z,1516421909.773 [NAL9602](ERROR): Data Fault
2018-01-20T04:18:29.803Z,1516421909.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:29.884Z,1516421909.884 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T04:18:29.884Z,1516421909.884 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-20T04:18:30.098Z,1516421910.098 [NAL9602](INFO): Powering down
2018-01-20T04:18:30.121Z,1516421910.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:30.175Z,1516421910.175 [CBIT](INFO): Critical error at 20180120T041829
2018-01-20T04:18:30.515Z,1516421910.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:30.924Z,1516421910.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:31.318Z,1516421911.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:31.718Z,1516421911.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:32.121Z,1516421912.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:32.521Z,1516421912.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:32.910Z,1516421912.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:33.314Z,1516421913.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:33.714Z,1516421913.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:34.110Z,1516421914.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:34.519Z,1516421914.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:34.912Z,1516421914.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:35.310Z,1516421915.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:35.718Z,1516421915.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:36.114Z,1516421916.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:36.518Z,1516421916.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:36.910Z,1516421916.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:37.308Z,1516421917.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:37.710Z,1516421917.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:38.114Z,1516421918.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:38.520Z,1516421918.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:38.923Z,1516421918.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:39.317Z,1516421919.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:39.721Z,1516421919.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:40.118Z,1516421920.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:40.518Z,1516421920.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:40.919Z,1516421920.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:41.369Z,1516421921.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:41.719Z,1516421921.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:42.122Z,1516421922.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:42.522Z,1516421922.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:42.923Z,1516421922.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:46.204Z,1516421926.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:46.322Z,1516421926.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:46.671Z,1516421926.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:47.074Z,1516421927.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:47.470Z,1516421927.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:47.874Z,1516421927.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:48.270Z,1516421928.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:48.670Z,1516421928.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:49.069Z,1516421929.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:49.471Z,1516421929.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:49.869Z,1516421929.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:50.274Z,1516421930.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:50.671Z,1516421930.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:51.070Z,1516421931.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:51.469Z,1516421931.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:51.871Z,1516421931.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:52.276Z,1516421932.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:52.675Z,1516421932.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:53.068Z,1516421933.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:53.468Z,1516421933.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:53.872Z,1516421933.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:54.273Z,1516421934.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:54.676Z,1516421934.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:55.092Z,1516421935.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:55.475Z,1516421935.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:55.873Z,1516421935.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:56.275Z,1516421936.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:56.668Z,1516421936.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:57.067Z,1516421937.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:57.468Z,1516421937.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:57.868Z,1516421937.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:58.278Z,1516421938.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:58.702Z,1516421938.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:59.068Z,1516421939.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:59.504Z,1516421939.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:18:59.878Z,1516421939.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:00.268Z,1516421940.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:00.695Z,1516421940.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:01.094Z,1516421941.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:01.468Z,1516421941.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:01.882Z,1516421941.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:02.278Z,1516421942.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:02.681Z,1516421942.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:03.075Z,1516421943.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:03.476Z,1516421943.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:03.868Z,1516421943.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:04.268Z,1516421944.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:04.694Z,1516421944.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:05.068Z,1516421945.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:05.475Z,1516421945.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:05.878Z,1516421945.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:06.267Z,1516421946.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:06.671Z,1516421946.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:07.067Z,1516421947.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:07.466Z,1516421947.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:07.875Z,1516421947.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:08.274Z,1516421948.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:08.667Z,1516421948.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:09.079Z,1516421949.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:09.472Z,1516421949.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:09.875Z,1516421949.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:10.278Z,1516421950.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:10.673Z,1516421950.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:11.070Z,1516421951.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:11.473Z,1516421951.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:11.873Z,1516421951.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:12.270Z,1516421952.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:12.675Z,1516421952.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:13.082Z,1516421953.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:13.470Z,1516421953.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:13.866Z,1516421953.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:14.269Z,1516421954.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:14.671Z,1516421954.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:15.079Z,1516421955.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:15.470Z,1516421955.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:15.870Z,1516421955.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:16.270Z,1516421956.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:16.670Z,1516421956.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:17.075Z,1516421957.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:17.471Z,1516421957.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:17.882Z,1516421957.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:18.270Z,1516421958.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:18.672Z,1516421958.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:19.084Z,1516421959.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:19.462Z,1516421959.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:19.874Z,1516421959.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:20.286Z,1516421960.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:20.662Z,1516421960.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:21.062Z,1516421961.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:21.466Z,1516421961.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:21.863Z,1516421961.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:22.269Z,1516421962.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:22.666Z,1516421962.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:23.062Z,1516421963.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:23.466Z,1516421963.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:23.874Z,1516421963.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:24.274Z,1516421964.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:24.345Z,1516421964.345 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T04:19:24.675Z,1516421964.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:25.073Z,1516421965.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:25.473Z,1516421965.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:25.871Z,1516421965.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:26.269Z,1516421966.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:26.678Z,1516421966.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:27.074Z,1516421967.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:27.470Z,1516421967.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:27.878Z,1516421967.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:28.274Z,1516421968.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:28.670Z,1516421968.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:29.078Z,1516421969.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:29.463Z,1516421969.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:29.870Z,1516421969.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:30.278Z,1516421970.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:30.663Z,1516421970.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:31.082Z,1516421971.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:31.473Z,1516421971.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:31.864Z,1516421971.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:32.285Z,1516421972.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:32.677Z,1516421972.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:33.070Z,1516421973.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:33.470Z,1516421973.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:33.904Z,1516421973.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:34.267Z,1516421974.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:34.667Z,1516421974.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:35.070Z,1516421975.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:35.460Z,1516421975.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:35.868Z,1516421975.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:36.267Z,1516421976.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:36.660Z,1516421976.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:37.075Z,1516421977.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:37.467Z,1516421977.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:37.864Z,1516421977.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:38.266Z,1516421978.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:38.670Z,1516421978.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:39.068Z,1516421979.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:39.470Z,1516421979.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:39.866Z,1516421979.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:40.274Z,1516421980.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:40.678Z,1516421980.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:41.075Z,1516421981.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:41.471Z,1516421981.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:41.873Z,1516421981.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:42.276Z,1516421982.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:42.674Z,1516421982.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:43.077Z,1516421983.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:46.352Z,1516421986.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:46.479Z,1516421986.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:46.829Z,1516421986.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:47.229Z,1516421987.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:47.627Z,1516421987.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:48.039Z,1516421988.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:48.430Z,1516421988.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:48.827Z,1516421988.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:49.226Z,1516421989.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:49.626Z,1516421989.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:50.026Z,1516421990.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:50.435Z,1516421990.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:50.826Z,1516421990.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:51.234Z,1516421991.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:51.626Z,1516421991.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:52.026Z,1516421992.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:52.416Z,1516421992.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:52.834Z,1516421992.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:53.226Z,1516421993.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:53.627Z,1516421993.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:54.039Z,1516421994.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:54.418Z,1516421994.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:54.818Z,1516421994.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:55.226Z,1516421995.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:55.634Z,1516421995.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:56.034Z,1516421996.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:56.423Z,1516421996.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:56.834Z,1516421996.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:57.223Z,1516421997.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:57.635Z,1516421997.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:58.019Z,1516421998.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:58.416Z,1516421998.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:58.827Z,1516421998.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:59.218Z,1516421999.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:19:59.620Z,1516421999.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:00.026Z,1516422000.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:00.418Z,1516422000.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:00.816Z,1516422000.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:01.223Z,1516422001.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:01.618Z,1516422001.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:02.027Z,1516422002.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:02.431Z,1516422002.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:02.823Z,1516422002.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:03.227Z,1516422003.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:03.629Z,1516422003.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:04.062Z,1516422004.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:04.422Z,1516422004.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:04.829Z,1516422004.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:05.226Z,1516422005.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:05.622Z,1516422005.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:06.026Z,1516422006.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:06.426Z,1516422006.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:06.826Z,1516422006.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:07.226Z,1516422007.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:07.626Z,1516422007.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:08.036Z,1516422008.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:08.422Z,1516422008.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:08.827Z,1516422008.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:09.227Z,1516422009.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:09.630Z,1516422009.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:10.027Z,1516422010.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:10.416Z,1516422010.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:10.818Z,1516422010.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:11.231Z,1516422011.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:11.630Z,1516422011.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:12.031Z,1516422012.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:12.419Z,1516422012.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:12.820Z,1516422012.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:13.218Z,1516422013.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:13.618Z,1516422013.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:14.018Z,1516422014.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:14.422Z,1516422014.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:14.818Z,1516422014.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:15.226Z,1516422015.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:15.618Z,1516422015.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:16.026Z,1516422016.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:16.419Z,1516422016.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:16.822Z,1516422016.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:17.218Z,1516422017.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:17.620Z,1516422017.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:18.022Z,1516422018.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:18.426Z,1516422018.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:18.822Z,1516422018.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:19.234Z,1516422019.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:19.631Z,1516422019.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:20.031Z,1516422020.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:20.429Z,1516422020.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:20.826Z,1516422020.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:21.232Z,1516422021.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:21.633Z,1516422021.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:22.026Z,1516422022.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:22.422Z,1516422022.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:22.825Z,1516422022.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:23.229Z,1516422023.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:23.627Z,1516422023.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:24.026Z,1516422024.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:24.426Z,1516422024.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:24.823Z,1516422024.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:25.225Z,1516422025.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:25.633Z,1516422025.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:26.033Z,1516422026.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:26.429Z,1516422026.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:26.826Z,1516422026.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:27.227Z,1516422027.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:27.629Z,1516422027.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:28.033Z,1516422028.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:28.423Z,1516422028.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:28.829Z,1516422028.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:29.233Z,1516422029.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:29.627Z,1516422029.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:30.025Z,1516422030.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:30.059Z,1516422030.059 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T04:20:30.059Z,1516422030.059 [NAL9602] No Fault, FailCount= 5
2018-01-20T04:20:30.418Z,1516422030.418 [NAL9602](INFO): Powering up NAL9602
2018-01-20T04:20:30.451Z,1516422030.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:30.816Z,1516422030.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:31.230Z,1516422031.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:31.627Z,1516422031.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:32.027Z,1516422032.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:32.427Z,1516422032.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:32.824Z,1516422032.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:33.222Z,1516422033.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:33.630Z,1516422033.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:34.024Z,1516422034.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:34.424Z,1516422034.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:34.826Z,1516422034.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:35.228Z,1516422035.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:35.628Z,1516422035.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:36.036Z,1516422036.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:36.435Z,1516422036.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:36.832Z,1516422036.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:37.231Z,1516422037.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:37.250Z,1516422037.250 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:20:37.250Z,1516422037.250 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48
2018-01-20T04:20:37.250Z,1516422037.250 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:20:37.262Z,1516422037.262 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:20:37.624Z,1516422037.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:37.687Z,1516422037.687 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:20:37.687Z,1516422037.687 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48
2018-01-20T04:20:38.019Z,1516422038.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:38.061Z,1516422038.061 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:20:38.062Z,1516422038.062 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:20:38.062Z,1516422038.062 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:20:38.422Z,1516422038.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:38.827Z,1516422038.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:39.218Z,1516422039.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:39.618Z,1516422039.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:40.027Z,1516422040.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:40.423Z,1516422040.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:40.822Z,1516422040.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:41.235Z,1516422041.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:41.602Z,1516422041.602 [NAL9602](INFO): NAL9602 initialized
2018-01-20T04:20:41.619Z,1516422041.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:42.023Z,1516422042.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:42.407Z,1516422042.407 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T04:20:42.407Z,1516422042.407 [NAL9602] Data Fault, FailCount= 1
2018-01-20T04:20:42.407Z,1516422042.407 [NAL9602](ERROR): Data Fault
2018-01-20T04:20:42.425Z,1516422042.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:42.484Z,1516422042.484 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T04:20:42.815Z,1516422042.815 [NAL9602](INFO): Powering down
2018-01-20T04:20:42.834Z,1516422042.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:43.229Z,1516422043.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:46.499Z,1516422046.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:46.562Z,1516422046.562 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T04:20:46.562Z,1516422046.562 [NAL9602] No Fault, FailCount= 1
2018-01-20T04:20:46.629Z,1516422046.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:46.999Z,1516422046.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:47.400Z,1516422047.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:47.798Z,1516422047.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:48.206Z,1516422048.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:48.605Z,1516422048.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:49.003Z,1516422049.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:49.403Z,1516422049.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:49.808Z,1516422049.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:50.199Z,1516422050.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:50.609Z,1516422050.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:51.009Z,1516422051.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:51.388Z,1516422051.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:51.790Z,1516422051.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:52.198Z,1516422052.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:52.592Z,1516422052.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:52.998Z,1516422052.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:53.399Z,1516422053.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:53.792Z,1516422053.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:54.190Z,1516422054.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:54.595Z,1516422054.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:54.000Z,1516422055.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:55.402Z,1516422055.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:55.807Z,1516422055.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:56.198Z,1516422056.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:56.598Z,1516422056.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:57.005Z,1516422057.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:57.399Z,1516422057.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:57.798Z,1516422057.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:58.208Z,1516422058.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:58.598Z,1516422058.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:58.998Z,1516422058.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:59.401Z,1516422059.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:20:59.807Z,1516422059.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:00.198Z,1516422060.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:00.598Z,1516422060.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:01.003Z,1516422061.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:01.390Z,1516422061.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:01.808Z,1516422061.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:02.190Z,1516422062.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:02.608Z,1516422062.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:03.002Z,1516422063.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:03.408Z,1516422063.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:03.791Z,1516422063.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:04.191Z,1516422064.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:04.608Z,1516422064.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:04.995Z,1516422064.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:05.392Z,1516422065.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:05.794Z,1516422065.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:06.190Z,1516422066.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:06.592Z,1516422066.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:06.995Z,1516422066.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:07.416Z,1516422067.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:07.793Z,1516422067.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:08.191Z,1516422068.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:08.599Z,1516422068.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:08.993Z,1516422068.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:09.390Z,1516422069.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:09.794Z,1516422069.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:10.190Z,1516422070.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:10.594Z,1516422070.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:10.999Z,1516422070.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:11.400Z,1516422071.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:11.802Z,1516422071.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:12.200Z,1516422072.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:12.597Z,1516422072.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:12.974Z,1516422072.974 [NAL9602](INFO): Powering up NAL9602
2018-01-20T04:21:12.999Z,1516422072.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:13.398Z,1516422073.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:13.799Z,1516422073.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:14.202Z,1516422074.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:14.598Z,1516422074.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:14.996Z,1516422074.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:15.404Z,1516422075.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:15.802Z,1516422075.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:16.203Z,1516422076.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:16.599Z,1516422076.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:16.998Z,1516422076.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:17.399Z,1516422077.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:17.799Z,1516422077.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:18.202Z,1516422078.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:18.599Z,1516422078.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:18.999Z,1516422078.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:19.398Z,1516422079.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:19.796Z,1516422079.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:20.199Z,1516422080.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:20.598Z,1516422080.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:20.000Z,1516422081.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:21.403Z,1516422081.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:21.803Z,1516422081.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:22.199Z,1516422082.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:22.612Z,1516422082.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:22.994Z,1516422082.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:23.413Z,1516422083.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:23.779Z,1516422083.779 [NAL9602](INFO): NAL9602 initialized
2018-01-20T04:21:23.810Z,1516422083.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:24.202Z,1516422084.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:24.611Z,1516422084.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:25.013Z,1516422085.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:25.417Z,1516422085.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:25.795Z,1516422085.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:26.206Z,1516422086.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:26.595Z,1516422086.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:27.019Z,1516422087.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:27.412Z,1516422087.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:27.818Z,1516422087.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:28.195Z,1516422088.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:28.599Z,1516422088.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:28.994Z,1516422088.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:29.391Z,1516422089.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:29.800Z,1516422089.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:30.195Z,1516422090.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:30.591Z,1516422090.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:30.995Z,1516422090.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:31.395Z,1516422091.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:31.813Z,1516422091.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:32.218Z,1516422092.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:32.614Z,1516422092.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:33.015Z,1516422093.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:33.399Z,1516422093.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:33.799Z,1516422093.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:34.191Z,1516422094.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:34.599Z,1516422094.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:34.995Z,1516422094.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:35.391Z,1516422095.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:35.799Z,1516422095.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:36.195Z,1516422096.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:36.591Z,1516422096.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:37.017Z,1516422097.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:37.414Z,1516422097.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:37.802Z,1516422097.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:38.214Z,1516422098.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:38.595Z,1516422098.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:38.999Z,1516422098.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:39.393Z,1516422099.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:39.802Z,1516422099.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:40.203Z,1516422100.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:40.597Z,1516422100.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:41.002Z,1516422101.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:41.400Z,1516422101.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:41.796Z,1516422101.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:42.213Z,1516422102.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:42.611Z,1516422102.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:43.010Z,1516422103.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:43.417Z,1516422103.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:46.692Z,1516422106.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:46.825Z,1516422106.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:47.183Z,1516422107.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:47.595Z,1516422107.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:47.978Z,1516422107.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:48.385Z,1516422108.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:48.787Z,1516422108.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:49.183Z,1516422109.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:49.587Z,1516422109.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:49.980Z,1516422109.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:50.378Z,1516422110.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:50.767Z,1516422110.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:51.163Z,1516422111.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:51.567Z,1516422111.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:51.967Z,1516422111.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:52.363Z,1516422112.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:52.767Z,1516422112.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:53.167Z,1516422113.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:53.563Z,1516422113.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:53.967Z,1516422113.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:54.367Z,1516422114.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:54.771Z,1516422114.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:55.167Z,1516422115.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:55.587Z,1516422115.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:55.963Z,1516422115.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:56.367Z,1516422116.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:56.767Z,1516422116.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:57.188Z,1516422117.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:57.582Z,1516422117.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:57.987Z,1516422117.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:58.364Z,1516422118.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:58.764Z,1516422118.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:59.171Z,1516422119.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:59.563Z,1516422119.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:21:59.970Z,1516422119.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:00.367Z,1516422120.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:00.763Z,1516422120.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:01.191Z,1516422121.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:01.596Z,1516422121.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:01.972Z,1516422121.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:02.369Z,1516422122.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:02.772Z,1516422122.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:03.172Z,1516422123.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:03.572Z,1516422123.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:03.973Z,1516422123.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:04.370Z,1516422124.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:04.769Z,1516422124.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:05.180Z,1516422125.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:05.572Z,1516422125.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:05.963Z,1516422125.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:06.378Z,1516422126.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:06.763Z,1516422126.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:07.171Z,1516422127.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:07.567Z,1516422127.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:07.963Z,1516422127.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:08.363Z,1516422128.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:08.771Z,1516422128.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:09.163Z,1516422129.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:09.567Z,1516422129.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:09.986Z,1516422129.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:10.391Z,1516422130.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:10.763Z,1516422130.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:11.171Z,1516422131.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:11.571Z,1516422131.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:11.968Z,1516422131.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:12.379Z,1516422132.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:12.771Z,1516422132.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:13.170Z,1516422133.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:13.571Z,1516422133.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:13.972Z,1516422133.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:14.381Z,1516422134.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:14.782Z,1516422134.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:15.172Z,1516422135.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:15.566Z,1516422135.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:15.967Z,1516422135.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:16.363Z,1516422136.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:16.765Z,1516422136.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:17.167Z,1516422137.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:17.580Z,1516422137.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:17.965Z,1516422137.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:18.367Z,1516422138.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:18.778Z,1516422138.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:19.174Z,1516422139.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:19.567Z,1516422139.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:19.971Z,1516422139.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:20.361Z,1516422140.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:20.775Z,1516422140.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:21.167Z,1516422141.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:21.564Z,1516422141.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:21.972Z,1516422141.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:22.371Z,1516422142.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:22.771Z,1516422142.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:23.172Z,1516422143.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:23.573Z,1516422143.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:23.968Z,1516422143.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:24.374Z,1516422144.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:24.771Z,1516422144.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:25.179Z,1516422145.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:25.579Z,1516422145.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:25.963Z,1516422145.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:26.373Z,1516422146.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:26.770Z,1516422146.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:27.190Z,1516422147.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:27.578Z,1516422147.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:27.967Z,1516422147.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:28.363Z,1516422148.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:28.761Z,1516422148.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:29.171Z,1516422149.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:29.563Z,1516422149.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:29.965Z,1516422149.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:30.371Z,1516422150.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:30.767Z,1516422150.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:31.163Z,1516422151.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:31.586Z,1516422151.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:31.986Z,1516422151.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:32.362Z,1516422152.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:32.767Z,1516422152.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:33.163Z,1516422153.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:33.565Z,1516422153.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:33.967Z,1516422153.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:34.363Z,1516422154.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:34.765Z,1516422154.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:35.172Z,1516422155.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:35.575Z,1516422155.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:35.964Z,1516422155.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:36.373Z,1516422156.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:36.773Z,1516422156.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:37.171Z,1516422157.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:37.571Z,1516422157.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:37.971Z,1516422157.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:38.367Z,1516422158.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:38.771Z,1516422158.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:39.163Z,1516422159.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:39.565Z,1516422159.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:39.967Z,1516422159.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:40.374Z,1516422160.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:40.778Z,1516422160.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:41.171Z,1516422161.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:41.574Z,1516422161.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:41.978Z,1516422161.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:42.372Z,1516422162.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:42.771Z,1516422162.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:43.176Z,1516422163.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:43.576Z,1516422163.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:46.846Z,1516422166.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:46.878Z,1516422166.878 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T04:17:46.1Z
2018-01-20T04:22:46.878Z,1516422166.878 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T04:22:46.878Z,1516422166.878 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T04:22:46.976Z,1516422166.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:47.393Z,1516422167.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:47.738Z,1516422167.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:48.133Z,1516422168.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:48.530Z,1516422168.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:48.543Z,1516422168.543 [PNI_TCM](ERROR): CRC does not match. Expected:0x38039 got:0x49414
2018-01-20T04:22:51.807Z,1516422171.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:51.912Z,1516422171.912 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180119T210901/Courier0184.lzma
2018-01-20T04:22:51.944Z,1516422171.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:52.292Z,1516422172.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:52.667Z,1516422172.667 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0184.lzma.bak
2018-01-20T04:22:52.667Z,1516422172.667 [DataOverHttps](INFO): SBD MOMSN=7726302
2018-01-20T04:22:52.710Z,1516422172.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:53.195Z,1516422173.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:53.494Z,1516422173.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:56.763Z,1516422176.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:56.888Z,1516422176.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:57.258Z,1516422177.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:57.655Z,1516422177.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:58.054Z,1516422178.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:22:58.457Z,1516422178.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:01.703Z,1516422181.703 [NAL9602](INFO): SBD MO Status=2, MOMSN=4662, MT Status=2, MTMSN=0
2018-01-20T04:23:01.703Z,1516422181.703 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-01-20T04:23:01.721Z,1516422181.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:01.826Z,1516422181.826 [DataOverHttps](INFO): Sending 253 bytes from file Logs/20180119T210901/Express0185.lzma
2018-01-20T04:23:01.834Z,1516422181.834 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T04:23:01.854Z,1516422181.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:02.231Z,1516422182.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:02.603Z,1516422182.603 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0185.lzma.bak
2018-01-20T04:23:02.603Z,1516422182.603 [DataOverHttps](INFO): SBD MOMSN=7726305
2018-01-20T04:23:02.645Z,1516422182.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:03.138Z,1516422183.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:03.166Z,1516422183.166 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T04:23:03.166Z,1516422183.166 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T04:23:03.166Z,1516422183.166 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T04:23:03.427Z,1516422183.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:06.698Z,1516422186.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:06.820Z,1516422186.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:07.179Z,1516422187.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:07.579Z,1516422187.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:07.979Z,1516422187.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:08.379Z,1516422188.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:08.783Z,1516422188.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:09.178Z,1516422189.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:09.579Z,1516422189.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:09.975Z,1516422189.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:10.383Z,1516422190.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:10.779Z,1516422190.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:11.175Z,1516422191.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:11.583Z,1516422191.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:11.979Z,1516422191.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:12.375Z,1516422192.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:12.779Z,1516422192.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:13.189Z,1516422193.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:13.585Z,1516422193.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:13.987Z,1516422193.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:14.390Z,1516422194.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:14.785Z,1516422194.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:15.181Z,1516422195.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:15.588Z,1516422195.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:15.987Z,1516422195.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:16.385Z,1516422196.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:16.800Z,1516422196.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:17.183Z,1516422197.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:17.583Z,1516422197.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:17.982Z,1516422197.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:18.391Z,1516422198.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:18.772Z,1516422198.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:19.191Z,1516422199.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:19.575Z,1516422199.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:19.986Z,1516422199.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:20.382Z,1516422200.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:20.775Z,1516422200.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:21.175Z,1516422201.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:21.579Z,1516422201.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:21.991Z,1516422201.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:22.377Z,1516422202.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:22.780Z,1516422202.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:23.175Z,1516422203.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:23.575Z,1516422203.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:23.980Z,1516422203.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:24.375Z,1516422204.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:24.775Z,1516422204.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:25.179Z,1516422205.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:25.575Z,1516422205.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:25.983Z,1516422205.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:26.383Z,1516422206.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:26.786Z,1516422206.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:27.183Z,1516422207.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:27.587Z,1516422207.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:27.987Z,1516422207.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:28.384Z,1516422208.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:28.785Z,1516422208.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:29.182Z,1516422209.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:29.579Z,1516422209.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:29.981Z,1516422209.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:30.382Z,1516422210.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:30.782Z,1516422210.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:31.196Z,1516422211.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:31.575Z,1516422211.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:31.975Z,1516422211.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:32.374Z,1516422212.374 [NAL9602](INFO): Powering down
2018-01-20T04:23:32.415Z,1516422212.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:32.775Z,1516422212.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:33.175Z,1516422213.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:33.580Z,1516422213.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:33.980Z,1516422213.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:34.380Z,1516422214.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:34.790Z,1516422214.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:35.186Z,1516422215.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:35.587Z,1516422215.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:35.989Z,1516422215.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:36.388Z,1516422216.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:36.786Z,1516422216.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:37.182Z,1516422217.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:37.591Z,1516422217.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:37.987Z,1516422217.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:38.383Z,1516422218.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:38.411Z,1516422218.411 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:23:38.411Z,1516422218.411 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49
2018-01-20T04:23:38.411Z,1516422218.411 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:23:38.424Z,1516422218.424 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:23:38.775Z,1516422218.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:38.832Z,1516422218.832 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:23:38.832Z,1516422218.832 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49
2018-01-20T04:23:39.175Z,1516422219.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:39.205Z,1516422219.205 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:23:39.205Z,1516422219.205 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:23:39.206Z,1516422219.206 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:23:39.600Z,1516422219.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:39.979Z,1516422219.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:40.379Z,1516422220.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:40.783Z,1516422220.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:41.183Z,1516422221.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:41.576Z,1516422221.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:41.984Z,1516422221.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:42.379Z,1516422222.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:42.783Z,1516422222.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:43.182Z,1516422223.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:43.582Z,1516422223.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:43.986Z,1516422223.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:44.385Z,1516422224.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:44.782Z,1516422224.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:45.182Z,1516422225.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:45.583Z,1516422225.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:45.989Z,1516422225.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:46.384Z,1516422226.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:46.785Z,1516422226.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:47.182Z,1516422227.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:47.588Z,1516422227.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:47.981Z,1516422227.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:48.380Z,1516422228.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:48.780Z,1516422228.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:49.181Z,1516422229.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:49.581Z,1516422229.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:49.983Z,1516422229.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:50.384Z,1516422230.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:50.786Z,1516422230.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:51.186Z,1516422231.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:51.589Z,1516422231.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:51.981Z,1516422231.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:52.389Z,1516422232.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:52.780Z,1516422232.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:53.180Z,1516422233.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:53.580Z,1516422233.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:54.006Z,1516422234.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:54.381Z,1516422234.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:54.781Z,1516422234.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:55.178Z,1516422235.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:55.582Z,1516422235.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:55.972Z,1516422235.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:56.380Z,1516422236.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:56.781Z,1516422236.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:57.191Z,1516422237.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:57.580Z,1516422237.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:57.980Z,1516422237.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:58.379Z,1516422238.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:58.779Z,1516422238.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:59.179Z,1516422239.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:59.578Z,1516422239.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:23:59.979Z,1516422239.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:00.380Z,1516422240.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:00.781Z,1516422240.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:01.181Z,1516422241.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:01.581Z,1516422241.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:01.981Z,1516422241.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:02.391Z,1516422242.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:02.782Z,1516422242.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:03.182Z,1516422243.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:03.584Z,1516422243.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:06.895Z,1516422246.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:07.015Z,1516422247.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:07.407Z,1516422247.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:07.807Z,1516422247.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:08.207Z,1516422248.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:08.605Z,1516422248.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:08.999Z,1516422248.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:09.388Z,1516422249.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:09.807Z,1516422249.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:10.191Z,1516422250.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:10.591Z,1516422250.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:10.998Z,1516422250.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:11.391Z,1516422251.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:11.792Z,1516422251.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:12.195Z,1516422252.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:12.595Z,1516422252.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:12.989Z,1516422252.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:13.395Z,1516422253.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:13.795Z,1516422253.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:14.191Z,1516422254.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:14.590Z,1516422254.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:14.995Z,1516422254.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:15.392Z,1516422255.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:15.800Z,1516422255.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:16.202Z,1516422256.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:16.596Z,1516422256.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:16.998Z,1516422256.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:17.399Z,1516422257.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:17.799Z,1516422257.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:18.203Z,1516422258.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:18.599Z,1516422258.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:18.999Z,1516422258.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:19.403Z,1516422259.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:19.799Z,1516422259.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:20.203Z,1516422260.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:20.607Z,1516422260.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:20.000Z,1516422261.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:21.400Z,1516422261.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:21.803Z,1516422261.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:22.191Z,1516422262.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:22.588Z,1516422262.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:23.007Z,1516422263.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:23.391Z,1516422263.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:23.788Z,1516422263.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:24.190Z,1516422264.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:24.598Z,1516422264.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:24.992Z,1516422264.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:25.394Z,1516422265.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:25.798Z,1516422265.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:26.199Z,1516422266.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:26.590Z,1516422266.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:26.999Z,1516422266.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:27.395Z,1516422267.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:27.798Z,1516422267.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:28.191Z,1516422268.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:28.592Z,1516422268.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:28.998Z,1516422268.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:29.399Z,1516422269.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:29.800Z,1516422269.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:30.198Z,1516422270.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:30.603Z,1516422270.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:30.999Z,1516422270.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:31.403Z,1516422271.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:31.799Z,1516422271.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:32.199Z,1516422272.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:32.597Z,1516422272.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:33.006Z,1516422273.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:33.399Z,1516422273.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:33.803Z,1516422273.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:34.207Z,1516422274.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:34.592Z,1516422274.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:35.002Z,1516422275.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:35.411Z,1516422275.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:35.791Z,1516422275.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:36.190Z,1516422276.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:36.608Z,1516422276.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:36.991Z,1516422276.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:37.403Z,1516422277.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:37.808Z,1516422277.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:38.203Z,1516422278.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:38.603Z,1516422278.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:39.002Z,1516422279.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:39.392Z,1516422279.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:39.795Z,1516422279.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:40.208Z,1516422280.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:40.591Z,1516422280.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:40.998Z,1516422280.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:41.399Z,1516422281.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:41.791Z,1516422281.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:42.190Z,1516422282.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:42.599Z,1516422282.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:42.990Z,1516422282.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:43.390Z,1516422283.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:43.799Z,1516422283.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:44.190Z,1516422284.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:44.603Z,1516422284.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:44.995Z,1516422284.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:45.391Z,1516422285.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:45.802Z,1516422285.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:46.203Z,1516422286.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:46.598Z,1516422286.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:47.001Z,1516422287.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:47.401Z,1516422287.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:47.800Z,1516422287.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:48.199Z,1516422288.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:48.600Z,1516422288.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:49.004Z,1516422289.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:49.401Z,1516422289.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:49.794Z,1516422289.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:50.203Z,1516422290.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:50.605Z,1516422290.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:50.994Z,1516422290.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:51.391Z,1516422291.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:51.804Z,1516422291.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:52.191Z,1516422292.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:52.598Z,1516422292.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:52.990Z,1516422292.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:53.392Z,1516422293.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:53.791Z,1516422293.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:54.202Z,1516422294.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:54.591Z,1516422294.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:54.991Z,1516422294.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:55.402Z,1516422295.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:55.787Z,1516422295.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:56.200Z,1516422296.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:56.606Z,1516422296.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:56.996Z,1516422296.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:57.399Z,1516422297.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:57.802Z,1516422297.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:58.199Z,1516422298.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:58.599Z,1516422298.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:59.003Z,1516422299.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:59.400Z,1516422299.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:24:59.803Z,1516422299.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:00.203Z,1516422300.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:00.600Z,1516422300.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:00.999Z,1516422300.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:01.403Z,1516422301.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:01.799Z,1516422301.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:02.205Z,1516422302.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:02.606Z,1516422302.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:03.000Z,1516422303.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:03.399Z,1516422303.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:03.802Z,1516422303.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:07.067Z,1516422307.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:07.184Z,1516422307.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:07.574Z,1516422307.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:07.972Z,1516422307.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:08.375Z,1516422308.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:08.776Z,1516422308.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:09.171Z,1516422309.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:09.573Z,1516422309.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:09.970Z,1516422309.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:10.370Z,1516422310.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:10.774Z,1516422310.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:11.173Z,1516422311.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:11.571Z,1516422311.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:11.975Z,1516422311.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:12.370Z,1516422312.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:12.770Z,1516422312.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:13.172Z,1516422313.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:13.578Z,1516422313.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:13.974Z,1516422313.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:14.373Z,1516422314.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:14.770Z,1516422314.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:15.171Z,1516422315.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:15.575Z,1516422315.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:15.975Z,1516422315.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:16.376Z,1516422316.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:16.772Z,1516422316.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:17.167Z,1516422317.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:17.556Z,1516422317.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:17.573Z,1516422317.573 [PNI_TCM](ERROR): CRC does not match. Expected:0x18990 got:0x16384
2018-01-20T04:25:17.977Z,1516422317.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:18.371Z,1516422318.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:18.759Z,1516422318.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:19.178Z,1516422319.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:19.184Z,1516422319.184 [PNI_TCM](ERROR): CRC does not match. Expected:0x25740 got:0x46784
2018-01-20T04:25:19.571Z,1516422319.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:19.971Z,1516422319.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:20.376Z,1516422320.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:20.767Z,1516422320.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:21.173Z,1516422321.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:21.576Z,1516422321.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:21.970Z,1516422321.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:22.379Z,1516422322.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:22.385Z,1516422322.385 [PNI_TCM](ERROR): CRC does not match. Expected:0x64906 got:0x6593
2018-01-20T04:25:22.776Z,1516422322.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:23.169Z,1516422323.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:23.560Z,1516422323.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:23.978Z,1516422323.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:24.370Z,1516422324.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:24.772Z,1516422324.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:25.174Z,1516422325.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:25.577Z,1516422325.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:25.584Z,1516422325.584 [PNI_TCM](ERROR): CRC does not match. Expected:0x3996 got:0x49305
2018-01-20T04:25:25.961Z,1516422325.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:26.373Z,1516422326.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:26.762Z,1516422326.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:27.176Z,1516422327.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:27.578Z,1516422327.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:27.984Z,1516422327.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:28.363Z,1516422328.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:28.775Z,1516422328.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:29.162Z,1516422329.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:29.562Z,1516422329.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:29.975Z,1516422329.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:30.364Z,1516422330.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:30.764Z,1516422330.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:31.173Z,1516422331.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:31.571Z,1516422331.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:31.963Z,1516422331.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:32.376Z,1516422332.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:32.773Z,1516422332.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:33.167Z,1516422333.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:33.565Z,1516422333.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:33.971Z,1516422333.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:34.365Z,1516422334.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:34.771Z,1516422334.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:35.175Z,1516422335.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:35.566Z,1516422335.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:35.975Z,1516422335.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:36.369Z,1516422336.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:36.764Z,1516422336.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:37.174Z,1516422337.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:37.577Z,1516422337.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:37.967Z,1516422337.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:38.375Z,1516422338.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:38.769Z,1516422338.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:39.159Z,1516422339.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:39.563Z,1516422339.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:39.963Z,1516422339.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:40.359Z,1516422340.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:40.767Z,1516422340.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:41.163Z,1516422341.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:41.559Z,1516422341.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:41.967Z,1516422341.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:42.363Z,1516422342.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:42.767Z,1516422342.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:43.167Z,1516422343.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:43.571Z,1516422343.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:43.967Z,1516422343.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:44.367Z,1516422344.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:44.767Z,1516422344.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:45.169Z,1516422345.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:45.564Z,1516422345.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:45.973Z,1516422345.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:46.367Z,1516422346.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:46.759Z,1516422346.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:47.164Z,1516422347.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:47.559Z,1516422347.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:47.959Z,1516422347.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:48.367Z,1516422348.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:48.759Z,1516422348.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:49.159Z,1516422349.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:49.567Z,1516422349.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:49.959Z,1516422349.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:50.367Z,1516422350.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:50.763Z,1516422350.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:51.167Z,1516422351.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:51.567Z,1516422351.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:51.976Z,1516422351.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:52.363Z,1516422352.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:52.761Z,1516422352.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:53.170Z,1516422353.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:53.568Z,1516422353.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:53.965Z,1516422353.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:54.368Z,1516422354.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:54.766Z,1516422354.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:55.166Z,1516422355.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:55.569Z,1516422355.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:55.967Z,1516422355.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:56.366Z,1516422356.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:56.769Z,1516422356.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:57.166Z,1516422357.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:57.566Z,1516422357.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:57.966Z,1516422357.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:58.366Z,1516422358.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:58.766Z,1516422358.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:59.182Z,1516422359.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:59.559Z,1516422359.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:25:59.959Z,1516422359.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:00.366Z,1516422360.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:00.774Z,1516422360.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:01.159Z,1516422361.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:01.563Z,1516422361.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:01.959Z,1516422361.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:02.359Z,1516422362.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:02.767Z,1516422362.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:03.159Z,1516422363.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:03.559Z,1516422363.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:03.971Z,1516422363.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:07.287Z,1516422367.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:07.405Z,1516422367.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:07.763Z,1516422367.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:08.165Z,1516422368.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:08.554Z,1516422368.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:08.962Z,1516422368.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:09.364Z,1516422369.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:09.757Z,1516422369.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:10.168Z,1516422370.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:10.558Z,1516422370.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:10.960Z,1516422370.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:11.362Z,1516422371.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:11.760Z,1516422371.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:12.160Z,1516422372.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:12.558Z,1516422372.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:12.961Z,1516422372.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:13.368Z,1516422373.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:13.763Z,1516422373.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:14.152Z,1516422374.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:14.552Z,1516422374.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:14.962Z,1516422374.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:15.369Z,1516422375.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:15.754Z,1516422375.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:16.156Z,1516422376.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:16.552Z,1516422376.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:16.956Z,1516422376.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:17.357Z,1516422377.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:17.760Z,1516422377.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:18.160Z,1516422378.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:18.563Z,1516422378.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:18.963Z,1516422378.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:19.364Z,1516422379.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:19.762Z,1516422379.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:20.164Z,1516422380.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:20.557Z,1516422380.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:20.964Z,1516422380.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:21.357Z,1516422381.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:21.760Z,1516422381.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:22.163Z,1516422382.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:22.560Z,1516422382.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:22.960Z,1516422382.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:23.360Z,1516422383.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:23.760Z,1516422383.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:24.160Z,1516422384.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:24.558Z,1516422384.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:24.969Z,1516422384.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:25.369Z,1516422385.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:25.763Z,1516422385.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:26.168Z,1516422386.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:26.562Z,1516422386.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:26.968Z,1516422386.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:27.352Z,1516422387.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:27.752Z,1516422387.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:28.156Z,1516422388.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:28.552Z,1516422388.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:28.954Z,1516422388.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:29.360Z,1516422389.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:29.753Z,1516422389.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:30.153Z,1516422390.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:30.557Z,1516422390.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:30.960Z,1516422390.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:31.353Z,1516422391.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:31.765Z,1516422391.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:32.156Z,1516422392.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:32.563Z,1516422392.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:32.964Z,1516422392.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:33.364Z,1516422393.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:33.756Z,1516422393.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:34.161Z,1516422394.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:34.565Z,1516422394.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:34.962Z,1516422394.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:35.361Z,1516422395.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:35.764Z,1516422395.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:36.161Z,1516422396.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:36.561Z,1516422396.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:36.958Z,1516422396.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:37.360Z,1516422397.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:37.758Z,1516422397.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:38.152Z,1516422398.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:38.554Z,1516422398.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:38.956Z,1516422398.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:39.356Z,1516422399.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:39.392Z,1516422399.392 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:26:39.392Z,1516422399.392 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50
2018-01-20T04:26:39.392Z,1516422399.392 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:26:39.405Z,1516422399.405 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:26:39.753Z,1516422399.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:39.799Z,1516422399.799 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:26:39.799Z,1516422399.799 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50
2018-01-20T04:26:40.160Z,1516422400.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:40.195Z,1516422400.195 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:26:40.195Z,1516422400.195 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:26:40.195Z,1516422400.195 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:26:40.565Z,1516422400.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:40.961Z,1516422400.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:41.361Z,1516422401.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:41.761Z,1516422401.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:42.162Z,1516422402.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:42.571Z,1516422402.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:42.962Z,1516422402.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:43.362Z,1516422403.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:43.762Z,1516422403.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:44.152Z,1516422404.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:44.544Z,1516422404.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:44.952Z,1516422404.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:45.357Z,1516422405.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:45.760Z,1516422405.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:46.161Z,1516422406.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:46.565Z,1516422406.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:46.961Z,1516422406.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:47.366Z,1516422407.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:47.766Z,1516422407.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:48.162Z,1516422408.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:48.565Z,1516422408.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:48.970Z,1516422408.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:49.369Z,1516422409.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:49.758Z,1516422409.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:50.164Z,1516422410.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:50.560Z,1516422410.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:50.964Z,1516422410.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:51.358Z,1516422411.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:51.760Z,1516422411.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:52.168Z,1516422412.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:52.552Z,1516422412.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:52.944Z,1516422412.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:53.360Z,1516422413.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:53.760Z,1516422413.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:54.160Z,1516422414.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:54.559Z,1516422414.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:54.960Z,1516422414.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:55.360Z,1516422415.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:55.752Z,1516422415.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:56.160Z,1516422416.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:56.554Z,1516422416.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:56.956Z,1516422416.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:57.360Z,1516422417.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:57.754Z,1516422417.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:58.156Z,1516422418.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:58.556Z,1516422418.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:58.952Z,1516422418.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:59.356Z,1516422419.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:26:59.760Z,1516422419.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:00.160Z,1516422420.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:00.556Z,1516422420.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:00.960Z,1516422420.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:01.360Z,1516422421.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:01.764Z,1516422421.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:02.156Z,1516422422.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:02.554Z,1516422422.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:02.955Z,1516422422.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:03.360Z,1516422423.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:03.754Z,1516422423.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:04.165Z,1516422424.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:07.437Z,1516422427.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:07.551Z,1516422427.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:07.908Z,1516422427.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:08.311Z,1516422428.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:08.707Z,1516422428.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:09.110Z,1516422429.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:09.506Z,1516422429.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:09.908Z,1516422429.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:10.306Z,1516422430.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:10.706Z,1516422430.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:11.109Z,1516422431.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:11.511Z,1516422431.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:11.914Z,1516422431.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:12.307Z,1516422432.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:12.710Z,1516422432.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:13.106Z,1516422433.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:13.502Z,1516422433.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:13.906Z,1516422433.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:14.306Z,1516422434.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:14.706Z,1516422434.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:15.105Z,1516422435.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:15.511Z,1516422435.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:15.906Z,1516422435.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:16.313Z,1516422436.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:16.706Z,1516422436.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:17.106Z,1516422437.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:17.498Z,1516422437.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:17.911Z,1516422437.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:18.314Z,1516422438.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:18.706Z,1516422438.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:19.103Z,1516422439.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:19.500Z,1516422439.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:19.914Z,1516422439.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:20.303Z,1516422440.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:20.696Z,1516422440.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:21.106Z,1516422441.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:21.507Z,1516422441.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:21.900Z,1516422441.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:22.298Z,1516422442.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:22.707Z,1516422442.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:23.107Z,1516422443.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:23.503Z,1516422443.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:23.907Z,1516422443.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:24.303Z,1516422444.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:24.699Z,1516422444.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:25.107Z,1516422445.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:25.501Z,1516422445.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:25.910Z,1516422445.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:26.309Z,1516422446.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:26.703Z,1516422446.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:27.106Z,1516422447.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:27.507Z,1516422447.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:27.906Z,1516422447.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:28.306Z,1516422448.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:28.713Z,1516422448.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:29.106Z,1516422449.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:29.506Z,1516422449.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:29.907Z,1516422449.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:30.306Z,1516422450.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:30.710Z,1516422450.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:31.115Z,1516422451.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:31.507Z,1516422451.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:31.906Z,1516422451.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:32.316Z,1516422452.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:32.706Z,1516422452.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:33.110Z,1516422453.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:33.516Z,1516422453.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:33.911Z,1516422453.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:34.309Z,1516422454.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:34.697Z,1516422454.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:35.099Z,1516422455.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:35.503Z,1516422455.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:35.900Z,1516422455.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:36.298Z,1516422456.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:36.703Z,1516422456.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:37.103Z,1516422457.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:37.511Z,1516422457.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:37.908Z,1516422457.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:38.306Z,1516422458.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:38.705Z,1516422458.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:39.110Z,1516422459.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:39.507Z,1516422459.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:39.907Z,1516422459.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:40.312Z,1516422460.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:40.708Z,1516422460.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:41.110Z,1516422461.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:41.510Z,1516422461.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:41.909Z,1516422461.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:42.311Z,1516422462.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:42.707Z,1516422462.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:43.115Z,1516422463.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:43.515Z,1516422463.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:43.907Z,1516422463.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:44.307Z,1516422464.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:44.706Z,1516422464.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:45.105Z,1516422465.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:45.508Z,1516422465.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:45.906Z,1516422465.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:46.306Z,1516422466.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:46.703Z,1516422466.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:47.099Z,1516422467.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:47.502Z,1516422467.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:47.900Z,1516422467.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:48.306Z,1516422468.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:48.706Z,1516422468.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:49.106Z,1516422469.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:49.506Z,1516422469.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:49.906Z,1516422469.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:50.307Z,1516422470.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:50.711Z,1516422470.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:51.109Z,1516422471.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:51.506Z,1516422471.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:51.910Z,1516422471.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:52.306Z,1516422472.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:52.706Z,1516422472.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:53.102Z,1516422473.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:53.506Z,1516422473.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:53.900Z,1516422473.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:54.306Z,1516422474.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:54.710Z,1516422474.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:55.106Z,1516422475.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:55.510Z,1516422475.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:55.905Z,1516422475.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:56.303Z,1516422476.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:56.708Z,1516422476.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:57.108Z,1516422477.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:57.505Z,1516422477.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:57.912Z,1516422477.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:58.311Z,1516422478.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:58.708Z,1516422478.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:59.109Z,1516422479.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:59.509Z,1516422479.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:27:59.906Z,1516422479.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:00.309Z,1516422480.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:00.710Z,1516422480.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:01.107Z,1516422481.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:01.509Z,1516422481.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:01.914Z,1516422481.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:02.314Z,1516422482.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:02.714Z,1516422482.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:03.111Z,1516422483.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:03.508Z,1516422483.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:03.529Z,1516422483.529 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T04:28:03.529Z,1516422483.529 [Default:CheckIn:C.Wait] Stopped
2018-01-20T04:28:03.529Z,1516422483.529 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T04:28:03.529Z,1516422483.529 [Default:CheckIn:D] Running Loop=1
2018-01-20T04:28:03.919Z,1516422483.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:03.940Z,1516422483.940 [Default:CheckIn:D] Stopped
2018-01-20T04:28:03.940Z,1516422483.940 [Default:CheckIn:E] Running Loop=1
2018-01-20T04:28:04.312Z,1516422484.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:04.338Z,1516422484.338 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 144.455241 min 
2018-01-20T04:28:04.338Z,1516422484.338 [Default:CheckIn:E] Stopped
2018-01-20T04:28:04.338Z,1516422484.338 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T04:28:04.338Z,1516422484.338 [Default:CheckIn] Stopped
2018-01-20T04:28:04.339Z,1516422484.339 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T04:28:04.339Z,1516422484.339 [Default:CheckIn](INFO): Running loop #15
2018-01-20T04:28:04.339Z,1516422484.339 [Default:CheckIn] Running Loop=15
2018-01-20T04:28:04.339Z,1516422484.339 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T04:28:04.339Z,1516422484.339 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T04:28:07.580Z,1516422487.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:07.674Z,1516422487.674 [NAL9602](INFO): Powering up
2018-01-20T04:28:07.691Z,1516422487.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:08.091Z,1516422488.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:08.490Z,1516422488.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:08.891Z,1516422488.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:09.294Z,1516422489.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:09.689Z,1516422489.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:10.083Z,1516422490.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:10.482Z,1516422490.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:10.883Z,1516422490.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:11.282Z,1516422491.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:11.694Z,1516422491.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:12.083Z,1516422492.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:12.483Z,1516422492.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:12.882Z,1516422492.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:13.283Z,1516422493.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:13.699Z,1516422493.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:14.094Z,1516422494.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:14.483Z,1516422494.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:14.894Z,1516422494.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:15.286Z,1516422495.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:15.684Z,1516422495.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:16.087Z,1516422496.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:16.498Z,1516422496.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:16.884Z,1516422496.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:17.299Z,1516422497.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:17.686Z,1516422497.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:18.083Z,1516422498.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:18.498Z,1516422498.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:18.870Z,1516422498.870 [NAL9602](INFO): NAL9602 initialized
2018-01-20T04:28:18.887Z,1516422498.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:19.295Z,1516422499.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:19.706Z,1516422499.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:20.106Z,1516422500.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:20.506Z,1516422500.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:20.895Z,1516422500.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:21.293Z,1516422501.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:21.706Z,1516422501.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:22.106Z,1516422502.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:22.517Z,1516422502.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:22.884Z,1516422502.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:23.291Z,1516422503.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:23.687Z,1516422503.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:24.088Z,1516422504.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:24.495Z,1516422504.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:24.895Z,1516422504.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:25.291Z,1516422505.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:25.691Z,1516422505.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:26.098Z,1516422506.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:26.506Z,1516422506.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:26.909Z,1516422506.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:27.318Z,1516422507.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:27.703Z,1516422507.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:28.087Z,1516422508.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:28.487Z,1516422508.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:28.893Z,1516422508.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:29.292Z,1516422509.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:29.692Z,1516422509.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:30.090Z,1516422510.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:30.499Z,1516422510.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:30.899Z,1516422510.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:31.283Z,1516422511.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:31.706Z,1516422511.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:32.113Z,1516422512.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:32.512Z,1516422512.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:32.898Z,1516422512.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:33.294Z,1516422513.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:33.692Z,1516422513.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:34.097Z,1516422514.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:34.497Z,1516422514.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:34.891Z,1516422514.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:35.286Z,1516422515.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:35.703Z,1516422515.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:36.083Z,1516422516.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:36.480Z,1516422516.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:36.911Z,1516422516.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:37.314Z,1516422517.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:37.693Z,1516422517.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:38.098Z,1516422518.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:38.487Z,1516422518.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:38.885Z,1516422518.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:39.292Z,1516422519.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:39.692Z,1516422519.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:40.095Z,1516422520.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:40.496Z,1516422520.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:40.893Z,1516422520.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:41.288Z,1516422521.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:41.703Z,1516422521.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:42.104Z,1516422522.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:42.498Z,1516422522.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:42.901Z,1516422522.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:43.304Z,1516422523.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:43.683Z,1516422523.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:44.087Z,1516422524.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:44.491Z,1516422524.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:44.884Z,1516422524.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:45.291Z,1516422525.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:45.691Z,1516422525.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:46.095Z,1516422526.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:46.496Z,1516422526.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:46.895Z,1516422526.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:47.302Z,1516422527.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:47.705Z,1516422527.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:48.110Z,1516422528.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:48.506Z,1516422528.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:48.889Z,1516422528.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:49.289Z,1516422529.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:49.688Z,1516422529.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:50.097Z,1516422530.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:50.500Z,1516422530.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:50.889Z,1516422530.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:51.318Z,1516422531.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:51.688Z,1516422531.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:52.082Z,1516422532.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:52.501Z,1516422532.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:52.900Z,1516422532.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:53.300Z,1516422533.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:53.726Z,1516422533.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:54.104Z,1516422534.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:54.496Z,1516422534.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:54.897Z,1516422534.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:55.298Z,1516422535.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:55.689Z,1516422535.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:56.089Z,1516422536.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:56.497Z,1516422536.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:56.898Z,1516422536.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:57.289Z,1516422537.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:57.708Z,1516422537.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:58.100Z,1516422538.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:58.503Z,1516422538.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:58.907Z,1516422538.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:59.298Z,1516422539.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:28:59.698Z,1516422539.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:00.089Z,1516422540.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:00.489Z,1516422540.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:00.914Z,1516422540.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:01.289Z,1516422541.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:01.689Z,1516422541.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:02.098Z,1516422542.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:02.493Z,1516422542.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:02.908Z,1516422542.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:03.325Z,1516422543.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:03.707Z,1516422543.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:04.106Z,1516422544.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:04.504Z,1516422544.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:07.866Z,1516422547.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:08.001Z,1516422548.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:08.401Z,1516422548.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:08.803Z,1516422548.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:09.179Z,1516422549.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:09.584Z,1516422549.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:09.979Z,1516422549.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:10.380Z,1516422550.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:10.780Z,1516422550.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:11.183Z,1516422551.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:11.570Z,1516422551.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:11.983Z,1516422551.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:12.380Z,1516422552.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:12.784Z,1516422552.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:13.193Z,1516422553.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:13.594Z,1516422553.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:13.990Z,1516422553.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:14.387Z,1516422554.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:14.771Z,1516422554.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:15.183Z,1516422555.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:15.591Z,1516422555.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:15.984Z,1516422555.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:16.371Z,1516422556.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:16.791Z,1516422556.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:17.183Z,1516422557.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:17.569Z,1516422557.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:17.997Z,1516422557.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:18.394Z,1516422558.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:18.790Z,1516422558.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:19.193Z,1516422559.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:19.571Z,1516422559.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:19.971Z,1516422559.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:20.375Z,1516422560.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:20.771Z,1516422560.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:21.171Z,1516422561.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:21.575Z,1516422561.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:21.971Z,1516422561.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:22.374Z,1516422562.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:22.776Z,1516422562.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:23.186Z,1516422563.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:23.578Z,1516422563.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:23.997Z,1516422563.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:24.394Z,1516422564.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:24.437Z,1516422564.437 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T04:29:24.775Z,1516422564.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:25.178Z,1516422565.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:25.577Z,1516422565.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:25.973Z,1516422565.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:26.384Z,1516422566.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:26.777Z,1516422566.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:27.169Z,1516422567.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:27.587Z,1516422567.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:27.971Z,1516422567.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:28.385Z,1516422568.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:28.791Z,1516422568.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:29.191Z,1516422569.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:29.586Z,1516422569.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:29.987Z,1516422569.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:30.388Z,1516422570.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:30.767Z,1516422570.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:31.171Z,1516422571.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:31.571Z,1516422571.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:31.974Z,1516422571.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:32.374Z,1516422572.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:32.774Z,1516422572.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:33.168Z,1516422573.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:33.587Z,1516422573.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:33.986Z,1516422573.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:34.385Z,1516422574.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:34.786Z,1516422574.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:35.173Z,1516422575.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:35.571Z,1516422575.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:35.982Z,1516422575.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:36.379Z,1516422576.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:36.779Z,1516422576.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:37.178Z,1516422577.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:37.578Z,1516422577.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:37.974Z,1516422577.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:38.387Z,1516422578.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:38.789Z,1516422578.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:39.193Z,1516422579.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:39.598Z,1516422579.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:39.994Z,1516422579.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:40.370Z,1516422580.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:40.403Z,1516422580.403 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:29:40.403Z,1516422580.403 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51
2018-01-20T04:29:40.403Z,1516422580.403 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:29:40.415Z,1516422580.415 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:29:40.792Z,1516422580.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:40.822Z,1516422580.822 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:29:40.822Z,1516422580.822 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51
2018-01-20T04:29:41.172Z,1516422581.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:41.210Z,1516422581.210 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:29:41.211Z,1516422581.211 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:29:41.211Z,1516422581.211 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:29:41.569Z,1516422581.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:41.995Z,1516422581.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:42.001Z,1516422582.001 [PNI_TCM](ERROR): CRC does not match. Expected:0x53138 got:0x17164
2018-01-20T04:29:42.378Z,1516422582.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:42.771Z,1516422582.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:43.179Z,1516422583.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:43.578Z,1516422583.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:43.986Z,1516422583.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:44.395Z,1516422584.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:44.792Z,1516422584.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:45.188Z,1516422585.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:45.579Z,1516422585.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:45.983Z,1516422585.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:46.382Z,1516422586.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:46.783Z,1516422586.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:46.789Z,1516422586.789 [PNI_TCM](ERROR): CRC does not match. Expected:0x38896 got:0x22279
2018-01-20T04:29:47.179Z,1516422587.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:47.578Z,1516422587.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:47.984Z,1516422587.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:48.376Z,1516422588.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:48.771Z,1516422588.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:49.186Z,1516422589.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:49.587Z,1516422589.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:49.991Z,1516422589.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:49.998Z,1516422589.998 [PNI_TCM](ERROR): CRC does not match. Expected:0x46371 got:0x9991
2018-01-20T04:29:50.396Z,1516422590.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:50.769Z,1516422590.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:51.167Z,1516422591.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:51.571Z,1516422591.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:51.972Z,1516422591.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:52.371Z,1516422592.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:52.771Z,1516422592.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:53.174Z,1516422593.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:53.568Z,1516422593.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:53.989Z,1516422593.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:53.995Z,1516422593.995 [PNI_TCM](ERROR): CRC does not match. Expected:0x59496 got:0x49305
2018-01-20T04:29:54.396Z,1516422594.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:54.778Z,1516422594.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:55.190Z,1516422595.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:55.580Z,1516422595.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:55.971Z,1516422595.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:56.371Z,1516422596.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:56.775Z,1516422596.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:57.176Z,1516422597.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:57.571Z,1516422597.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:57.971Z,1516422597.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:58.375Z,1516422598.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:58.771Z,1516422598.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:59.167Z,1516422599.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:59.582Z,1516422599.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:29:59.991Z,1516422599.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:00.395Z,1516422600.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:00.782Z,1516422600.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:01.175Z,1516422601.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:01.579Z,1516422601.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:01.972Z,1516422601.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:02.380Z,1516422602.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:02.777Z,1516422602.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:03.183Z,1516422603.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:03.585Z,1516422603.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:03.980Z,1516422603.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:04.390Z,1516422604.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:04.795Z,1516422604.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:08.098Z,1516422608.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:08.226Z,1516422608.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:08.604Z,1516422608.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:09.013Z,1516422609.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:09.391Z,1516422609.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:09.798Z,1516422609.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:10.208Z,1516422610.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:10.595Z,1516422610.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:11.002Z,1516422611.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:11.400Z,1516422611.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:11.792Z,1516422611.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:12.203Z,1516422612.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:12.599Z,1516422612.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:13.003Z,1516422613.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:13.398Z,1516422613.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:13.791Z,1516422613.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:14.195Z,1516422614.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:14.602Z,1516422614.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:15.014Z,1516422615.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:15.410Z,1516422615.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:15.799Z,1516422615.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:16.199Z,1516422616.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:16.597Z,1516422616.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:17.001Z,1516422617.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:17.400Z,1516422617.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:17.793Z,1516422617.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:18.206Z,1516422618.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:18.603Z,1516422618.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:18.990Z,1516422618.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:19.414Z,1516422619.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:19.810Z,1516422619.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:20.194Z,1516422620.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:20.607Z,1516422620.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:20.000Z,1516422621.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:21.395Z,1516422621.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:21.803Z,1516422621.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:22.200Z,1516422622.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:22.597Z,1516422622.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:23.008Z,1516422623.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:23.404Z,1516422623.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:23.810Z,1516422623.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:24.214Z,1516422624.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:24.615Z,1516422624.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:25.006Z,1516422625.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:25.403Z,1516422625.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:25.800Z,1516422625.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:26.203Z,1516422626.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:26.603Z,1516422626.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:27.007Z,1516422627.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:27.400Z,1516422627.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:27.803Z,1516422627.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:28.203Z,1516422628.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:28.595Z,1516422628.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:29.014Z,1516422629.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:29.410Z,1516422629.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:29.814Z,1516422629.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:30.214Z,1516422630.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:30.595Z,1516422630.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:30.992Z,1516422630.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:31.395Z,1516422631.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:31.816Z,1516422631.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:32.191Z,1516422632.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:32.595Z,1516422632.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:32.996Z,1516422632.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:33.390Z,1516422633.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:33.799Z,1516422633.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:34.210Z,1516422634.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:34.606Z,1516422634.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:35.013Z,1516422635.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:35.414Z,1516422635.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:35.796Z,1516422635.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:36.207Z,1516422636.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:36.600Z,1516422636.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:37.003Z,1516422637.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:37.407Z,1516422637.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:37.798Z,1516422637.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:38.190Z,1516422638.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:38.598Z,1516422638.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:39.008Z,1516422639.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:39.408Z,1516422639.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:39.815Z,1516422639.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:40.228Z,1516422640.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:40.602Z,1516422640.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:40.999Z,1516422640.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:41.392Z,1516422641.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:41.799Z,1516422641.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:42.201Z,1516422642.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:42.608Z,1516422642.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:42.996Z,1516422642.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:43.412Z,1516422643.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:43.809Z,1516422643.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:44.190Z,1516422644.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:44.612Z,1516422644.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:45.020Z,1516422645.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:45.406Z,1516422645.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:45.818Z,1516422645.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:46.192Z,1516422646.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:46.599Z,1516422646.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:46.000Z,1516422647.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:47.401Z,1516422647.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:47.799Z,1516422647.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:48.200Z,1516422648.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:48.604Z,1516422648.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:48.998Z,1516422648.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:49.402Z,1516422649.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:49.810Z,1516422649.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:50.206Z,1516422650.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:50.595Z,1516422650.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:50.995Z,1516422650.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:51.390Z,1516422651.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:51.811Z,1516422651.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:52.191Z,1516422652.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:52.590Z,1516422652.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:52.995Z,1516422652.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:53.402Z,1516422653.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:53.802Z,1516422653.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:54.207Z,1516422654.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:54.595Z,1516422654.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:55.003Z,1516422655.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:55.403Z,1516422655.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:55.803Z,1516422655.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:56.204Z,1516422656.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:56.601Z,1516422656.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:57.006Z,1516422657.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:57.406Z,1516422657.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:57.803Z,1516422657.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:58.199Z,1516422658.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:58.598Z,1516422658.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:58.998Z,1516422658.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:59.408Z,1516422659.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:30:59.794Z,1516422659.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:00.203Z,1516422660.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:00.603Z,1516422660.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:01.002Z,1516422661.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:01.402Z,1516422661.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:01.799Z,1516422661.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:02.209Z,1516422662.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:02.614Z,1516422662.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:02.991Z,1516422662.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:03.415Z,1516422663.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:03.799Z,1516422663.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:04.191Z,1516422664.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:04.598Z,1516422664.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:04.994Z,1516422664.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:08.450Z,1516422668.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:08.596Z,1516422668.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:08.932Z,1516422668.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:09.334Z,1516422669.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:09.720Z,1516422669.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:10.130Z,1516422670.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:10.540Z,1516422670.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:10.942Z,1516422670.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:11.339Z,1516422671.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:11.750Z,1516422671.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:12.146Z,1516422672.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:12.538Z,1516422672.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:12.934Z,1516422672.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:13.334Z,1516422673.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:13.728Z,1516422673.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:14.124Z,1516422674.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:14.540Z,1516422674.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:14.924Z,1516422674.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:15.326Z,1516422675.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:15.724Z,1516422675.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:16.154Z,1516422676.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:16.536Z,1516422676.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:16.942Z,1516422676.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:17.343Z,1516422677.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:17.732Z,1516422677.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:18.136Z,1516422678.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:18.534Z,1516422678.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:18.931Z,1516422678.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:19.322Z,1516422679.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:19.738Z,1516422679.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:20.130Z,1516422680.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:20.526Z,1516422680.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:20.943Z,1516422680.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:21.341Z,1516422681.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:21.734Z,1516422681.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:22.146Z,1516422682.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:22.519Z,1516422682.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:22.919Z,1516422682.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:23.344Z,1516422683.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:23.722Z,1516422683.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:24.127Z,1516422684.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:24.523Z,1516422684.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:24.921Z,1516422684.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:25.328Z,1516422685.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:25.723Z,1516422685.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:26.132Z,1516422686.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:26.532Z,1516422686.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:26.950Z,1516422686.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:27.350Z,1516422687.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:27.727Z,1516422687.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:28.133Z,1516422688.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:28.139Z,1516422688.139 [PNI_TCM](ERROR): CRC does not match. Expected:0x51986 got:0x7489
2018-01-20T04:31:28.530Z,1516422688.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:28.927Z,1516422688.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:29.332Z,1516422689.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:29.733Z,1516422689.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:30.135Z,1516422690.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:30.530Z,1516422690.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:30.927Z,1516422690.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:31.340Z,1516422691.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:31.740Z,1516422691.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:32.138Z,1516422692.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:32.540Z,1516422692.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:32.933Z,1516422692.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:33.330Z,1516422693.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:33.735Z,1516422693.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:34.126Z,1516422694.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:34.539Z,1516422694.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:34.938Z,1516422694.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:35.326Z,1516422695.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:35.719Z,1516422695.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:36.144Z,1516422696.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:36.548Z,1516422696.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:36.936Z,1516422696.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:37.335Z,1516422697.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:37.723Z,1516422697.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:38.150Z,1516422698.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:38.546Z,1516422698.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:38.945Z,1516422698.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:39.330Z,1516422699.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:39.728Z,1516422699.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:40.123Z,1516422700.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:40.519Z,1516422700.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:40.927Z,1516422700.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:41.332Z,1516422701.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:41.719Z,1516422701.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:42.128Z,1516422702.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:42.523Z,1516422702.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:42.930Z,1516422702.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:43.339Z,1516422703.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:43.749Z,1516422703.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:44.134Z,1516422704.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:44.540Z,1516422704.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:44.931Z,1516422704.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:45.323Z,1516422705.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:45.729Z,1516422705.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:46.132Z,1516422706.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:46.532Z,1516422706.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:46.934Z,1516422706.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:47.331Z,1516422707.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:47.727Z,1516422707.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:48.141Z,1516422708.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:48.545Z,1516422708.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:48.935Z,1516422708.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:49.334Z,1516422709.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:49.723Z,1516422709.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:50.123Z,1516422710.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:50.521Z,1516422710.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:50.952Z,1516422710.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:51.330Z,1516422711.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:51.719Z,1516422711.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:52.124Z,1516422712.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:52.528Z,1516422712.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:52.920Z,1516422712.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:53.331Z,1516422713.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:53.728Z,1516422713.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:54.132Z,1516422714.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:54.533Z,1516422714.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:54.933Z,1516422714.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:55.336Z,1516422715.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:55.736Z,1516422715.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:56.119Z,1516422716.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:56.518Z,1516422716.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:56.923Z,1516422716.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:57.319Z,1516422717.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:57.720Z,1516422717.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:58.127Z,1516422718.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:58.519Z,1516422718.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:58.920Z,1516422718.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:59.323Z,1516422719.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:31:59.730Z,1516422719.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:00.130Z,1516422720.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:00.523Z,1516422720.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:00.919Z,1516422720.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:01.323Z,1516422721.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:01.730Z,1516422721.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:02.131Z,1516422722.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:02.521Z,1516422722.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:02.928Z,1516422722.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:03.332Z,1516422723.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:03.726Z,1516422723.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:04.137Z,1516422724.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:04.538Z,1516422724.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:04.922Z,1516422724.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:05.341Z,1516422725.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:08.628Z,1516422728.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:08.762Z,1516422728.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:09.101Z,1516422729.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:09.510Z,1516422729.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:09.902Z,1516422729.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:10.299Z,1516422730.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:10.705Z,1516422730.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:11.100Z,1516422731.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:11.507Z,1516422731.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:11.904Z,1516422731.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:12.301Z,1516422732.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:12.713Z,1516422732.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:13.118Z,1516422733.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:13.492Z,1516422733.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:13.895Z,1516422733.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:14.295Z,1516422734.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:14.692Z,1516422734.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:15.095Z,1516422735.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:15.495Z,1516422735.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:15.892Z,1516422735.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:16.295Z,1516422736.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:16.695Z,1516422736.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:17.110Z,1516422737.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:17.513Z,1516422737.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:17.895Z,1516422737.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:18.294Z,1516422738.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:18.695Z,1516422738.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:19.095Z,1516422739.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:19.492Z,1516422739.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:19.895Z,1516422739.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:20.295Z,1516422740.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:20.692Z,1516422740.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:21.114Z,1516422741.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:21.518Z,1516422741.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:21.914Z,1516422741.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:22.314Z,1516422742.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:22.695Z,1516422742.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:23.092Z,1516422743.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:23.495Z,1516422743.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:23.895Z,1516422743.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:24.295Z,1516422744.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:24.695Z,1516422744.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:25.095Z,1516422745.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:25.492Z,1516422745.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:25.914Z,1516422745.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:26.318Z,1516422746.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:26.692Z,1516422746.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:27.095Z,1516422747.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:27.495Z,1516422747.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:27.892Z,1516422747.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:28.303Z,1516422748.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:28.703Z,1516422748.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:29.094Z,1516422749.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:29.504Z,1516422749.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:29.904Z,1516422749.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:30.301Z,1516422750.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:30.703Z,1516422750.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:31.108Z,1516422751.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:31.494Z,1516422751.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:31.907Z,1516422751.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:32.302Z,1516422752.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:32.692Z,1516422752.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:33.102Z,1516422753.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:33.504Z,1516422753.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:33.892Z,1516422753.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:34.298Z,1516422754.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:34.719Z,1516422754.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:35.110Z,1516422755.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:35.495Z,1516422755.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:35.895Z,1516422755.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:36.293Z,1516422756.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:36.699Z,1516422756.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:37.096Z,1516422757.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:37.492Z,1516422757.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:37.895Z,1516422757.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:38.295Z,1516422758.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:38.692Z,1516422758.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:39.116Z,1516422759.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:39.516Z,1516422759.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:39.892Z,1516422759.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:40.298Z,1516422760.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:40.699Z,1516422760.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:41.092Z,1516422761.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:41.499Z,1516422761.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:41.548Z,1516422761.548 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:32:41.548Z,1516422761.548 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52
2018-01-20T04:32:41.548Z,1516422761.548 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:32:41.561Z,1516422761.561 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:32:41.901Z,1516422761.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:41.962Z,1516422761.962 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:32:41.962Z,1516422761.962 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52
2018-01-20T04:32:42.306Z,1516422762.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:42.324Z,1516422762.324 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:32:42.324Z,1516422762.324 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:32:42.341Z,1516422762.341 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:32:42.701Z,1516422762.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:43.103Z,1516422763.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:43.510Z,1516422763.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:43.910Z,1516422763.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:44.314Z,1516422764.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:44.713Z,1516422764.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:45.096Z,1516422765.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:45.499Z,1516422765.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:45.892Z,1516422765.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:46.299Z,1516422766.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:46.695Z,1516422766.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:47.093Z,1516422767.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:47.503Z,1516422767.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:47.896Z,1516422767.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:48.300Z,1516422768.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:48.714Z,1516422768.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:49.114Z,1516422769.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:49.510Z,1516422769.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:49.907Z,1516422769.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:50.295Z,1516422770.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:50.694Z,1516422770.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:51.095Z,1516422771.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:51.498Z,1516422771.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:51.893Z,1516422771.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:52.303Z,1516422772.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:52.704Z,1516422772.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:53.100Z,1516422773.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:53.508Z,1516422773.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:53.913Z,1516422773.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:54.314Z,1516422774.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:54.718Z,1516422774.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:55.108Z,1516422775.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:55.496Z,1516422775.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:55.911Z,1516422775.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:56.295Z,1516422776.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:56.692Z,1516422776.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:57.097Z,1516422777.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:57.508Z,1516422777.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:57.892Z,1516422777.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:58.295Z,1516422778.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:58.718Z,1516422778.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:59.114Z,1516422779.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:59.521Z,1516422779.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:32:59.918Z,1516422779.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:00.310Z,1516422780.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:00.696Z,1516422780.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:01.095Z,1516422781.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:01.492Z,1516422781.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:01.897Z,1516422781.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:02.297Z,1516422782.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:02.693Z,1516422782.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:03.103Z,1516422783.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:03.497Z,1516422783.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:03.906Z,1516422783.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:04.306Z,1516422784.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:04.346Z,1516422784.346 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T04:28:04.3Z
2018-01-20T04:33:04.346Z,1516422784.346 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T04:33:04.347Z,1516422784.347 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T04:33:04.723Z,1516422784.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:05.162Z,1516422785.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:05.505Z,1516422785.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:08.781Z,1516422788.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:08.883Z,1516422788.883 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0188.lzma
2018-01-20T04:33:08.918Z,1516422788.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:09.266Z,1516422789.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:09.624Z,1516422789.624 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0188.lzma.bak
2018-01-20T04:33:09.624Z,1516422789.624 [DataOverHttps](INFO): SBD MOMSN=7726372
2018-01-20T04:33:09.688Z,1516422789.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:10.167Z,1516422790.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:10.450Z,1516422790.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:13.716Z,1516422793.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:13.848Z,1516422793.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:14.256Z,1516422794.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:14.657Z,1516422794.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:15.051Z,1516422795.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:15.441Z,1516422795.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:18.735Z,1516422798.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:18.833Z,1516422798.833 [DataOverHttps](INFO): Sending 198 bytes from file Logs/20180119T210901/Express0189.lzma
2018-01-20T04:33:18.879Z,1516422798.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:19.238Z,1516422799.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:19.615Z,1516422799.615 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0189.lzma.bak
2018-01-20T04:33:19.615Z,1516422799.615 [DataOverHttps](INFO): SBD MOMSN=7726374
2018-01-20T04:33:19.637Z,1516422799.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:20.134Z,1516422800.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:20.154Z,1516422800.154 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T04:33:20.155Z,1516422800.155 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T04:33:20.155Z,1516422800.155 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T04:33:20.436Z,1516422800.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:23.721Z,1516422803.721 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T04:33:23.738Z,1516422803.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:23.869Z,1516422803.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:24.240Z,1516422804.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:24.650Z,1516422804.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:25.026Z,1516422805.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:25.440Z,1516422805.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:25.827Z,1516422805.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:26.227Z,1516422806.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:26.640Z,1516422806.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:27.027Z,1516422807.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:27.427Z,1516422807.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:27.831Z,1516422807.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:28.244Z,1516422808.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:28.631Z,1516422808.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:29.047Z,1516422809.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:29.441Z,1516422809.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:29.839Z,1516422809.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:30.240Z,1516422810.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:30.640Z,1516422810.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:31.041Z,1516422811.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:31.443Z,1516422811.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:31.840Z,1516422811.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:32.240Z,1516422812.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:32.640Z,1516422812.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:33.040Z,1516422813.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:33.440Z,1516422813.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:33.839Z,1516422813.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:34.248Z,1516422814.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:34.640Z,1516422814.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:35.039Z,1516422815.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:35.427Z,1516422815.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:35.824Z,1516422815.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:36.253Z,1516422816.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:36.627Z,1516422816.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:37.027Z,1516422817.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:37.431Z,1516422817.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:37.840Z,1516422817.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:38.240Z,1516422818.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:38.631Z,1516422818.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:39.044Z,1516422819.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:39.431Z,1516422819.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:39.844Z,1516422819.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:40.244Z,1516422820.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:40.631Z,1516422820.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:41.044Z,1516422821.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:41.448Z,1516422821.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:41.851Z,1516422821.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:42.250Z,1516422822.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:42.643Z,1516422822.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:43.046Z,1516422823.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:43.439Z,1516422823.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:43.832Z,1516422823.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:44.232Z,1516422824.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:44.670Z,1516422824.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:45.031Z,1516422825.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:45.451Z,1516422825.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:45.860Z,1516422825.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:46.246Z,1516422826.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:46.643Z,1516422826.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:47.047Z,1516422827.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:47.449Z,1516422827.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:47.839Z,1516422827.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:48.281Z,1516422828.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:48.639Z,1516422828.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:49.032Z,1516422829.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:49.448Z,1516422829.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:49.852Z,1516422829.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:50.246Z,1516422830.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:50.645Z,1516422830.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:51.046Z,1516422831.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:51.446Z,1516422831.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:51.832Z,1516422831.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:52.232Z,1516422832.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:52.642Z,1516422832.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:53.062Z,1516422833.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:53.460Z,1516422833.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:53.847Z,1516422833.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:54.242Z,1516422834.242 [NAL9602](INFO): Powering down
2018-01-20T04:33:54.263Z,1516422834.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:54.632Z,1516422834.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:55.032Z,1516422835.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:55.441Z,1516422835.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:55.826Z,1516422835.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:56.227Z,1516422836.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:56.641Z,1516422836.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:57.027Z,1516422837.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:57.428Z,1516422837.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:57.830Z,1516422837.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:58.240Z,1516422838.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:58.628Z,1516422838.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:59.041Z,1516422839.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:59.448Z,1516422839.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:33:59.831Z,1516422839.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:00.244Z,1516422840.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:00.644Z,1516422840.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:01.032Z,1516422841.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:01.445Z,1516422841.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:01.840Z,1516422841.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:02.240Z,1516422842.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:02.644Z,1516422842.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:03.040Z,1516422843.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:03.444Z,1516422843.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:03.842Z,1516422843.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:04.227Z,1516422844.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:04.628Z,1516422844.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:05.026Z,1516422845.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:05.427Z,1516422845.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:05.828Z,1516422845.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:06.231Z,1516422846.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:06.627Z,1516422846.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:07.027Z,1516422847.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:07.426Z,1516422847.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:07.840Z,1516422847.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:08.240Z,1516422848.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:08.644Z,1516422848.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:09.027Z,1516422849.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:09.431Z,1516422849.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:09.830Z,1516422849.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:10.240Z,1516422850.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:10.625Z,1516422850.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:11.041Z,1516422851.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:11.444Z,1516422851.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:11.831Z,1516422851.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:12.239Z,1516422852.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:12.643Z,1516422852.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:13.041Z,1516422853.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:13.444Z,1516422853.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:13.847Z,1516422853.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:14.247Z,1516422854.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:14.644Z,1516422854.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:15.049Z,1516422855.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:15.444Z,1516422855.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:15.842Z,1516422855.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:16.249Z,1516422856.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:16.641Z,1516422856.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:17.040Z,1516422857.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:17.445Z,1516422857.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:17.828Z,1516422857.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:18.262Z,1516422858.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:18.649Z,1516422858.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:19.028Z,1516422859.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:19.426Z,1516422859.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:19.849Z,1516422859.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:20.248Z,1516422860.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:20.631Z,1516422860.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:23.975Z,1516422863.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:24.108Z,1516422864.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:24.464Z,1516422864.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:24.864Z,1516422864.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:25.262Z,1516422865.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:25.659Z,1516422865.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:26.058Z,1516422866.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:26.456Z,1516422866.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:26.858Z,1516422866.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:27.259Z,1516422867.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:27.655Z,1516422867.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:28.068Z,1516422868.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:28.462Z,1516422868.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:28.856Z,1516422868.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:29.258Z,1516422869.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:29.662Z,1516422869.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:30.059Z,1516422870.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:30.458Z,1516422870.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:30.862Z,1516422870.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:31.262Z,1516422871.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:31.658Z,1516422871.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:32.063Z,1516422872.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:32.456Z,1516422872.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:32.853Z,1516422872.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:33.259Z,1516422873.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:33.656Z,1516422873.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:34.058Z,1516422874.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:34.462Z,1516422874.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:34.856Z,1516422874.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:35.266Z,1516422875.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:35.662Z,1516422875.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:36.062Z,1516422876.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:36.460Z,1516422876.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:36.863Z,1516422876.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:37.258Z,1516422877.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:37.658Z,1516422877.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:38.061Z,1516422878.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:38.457Z,1516422878.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:38.858Z,1516422878.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:39.257Z,1516422879.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:39.656Z,1516422879.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:40.059Z,1516422880.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:40.466Z,1516422880.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:40.844Z,1516422880.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:41.248Z,1516422881.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:41.660Z,1516422881.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:42.058Z,1516422882.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:42.458Z,1516422882.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:42.860Z,1516422882.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:43.263Z,1516422883.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:43.658Z,1516422883.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:44.067Z,1516422884.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:44.457Z,1516422884.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:44.863Z,1516422884.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:45.250Z,1516422885.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:45.648Z,1516422885.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:46.048Z,1516422886.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:46.456Z,1516422886.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:46.851Z,1516422886.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:47.250Z,1516422887.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:47.655Z,1516422887.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:48.057Z,1516422888.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:48.452Z,1516422888.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:48.855Z,1516422888.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:49.254Z,1516422889.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:49.659Z,1516422889.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:50.059Z,1516422890.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:50.460Z,1516422890.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:50.862Z,1516422890.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:51.258Z,1516422891.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:51.664Z,1516422891.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:52.066Z,1516422892.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:52.466Z,1516422892.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:52.863Z,1516422892.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:53.261Z,1516422893.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:53.664Z,1516422893.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:54.056Z,1516422894.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:54.467Z,1516422894.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:54.474Z,1516422894.474 [PNI_TCM](ERROR): CRC does not match. Expected:0x61197 got:0x40967
2018-01-20T04:34:54.855Z,1516422894.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:55.264Z,1516422895.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:55.675Z,1516422895.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:56.048Z,1516422896.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:56.450Z,1516422896.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:56.854Z,1516422896.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:57.271Z,1516422897.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:57.647Z,1516422897.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:58.056Z,1516422898.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:58.074Z,1516422898.074 [PNI_TCM](ERROR): CRC does not match. Expected:0x53138 got:0x17164
2018-01-20T04:34:58.449Z,1516422898.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:58.854Z,1516422898.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:59.255Z,1516422899.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:34:59.650Z,1516422899.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:00.048Z,1516422900.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:00.450Z,1516422900.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:00.848Z,1516422900.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:01.261Z,1516422901.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:01.660Z,1516422901.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:02.058Z,1516422902.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:02.464Z,1516422902.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:02.862Z,1516422902.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:03.258Z,1516422903.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:03.660Z,1516422903.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:04.057Z,1516422904.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:04.456Z,1516422904.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:04.862Z,1516422904.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:05.258Z,1516422905.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:05.656Z,1516422905.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:06.054Z,1516422906.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:06.465Z,1516422906.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:06.855Z,1516422906.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:07.255Z,1516422907.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:07.659Z,1516422907.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:08.059Z,1516422908.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:08.454Z,1516422908.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:08.862Z,1516422908.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:09.254Z,1516422909.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:09.657Z,1516422909.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:10.055Z,1516422910.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:10.444Z,1516422910.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:10.851Z,1516422910.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:11.251Z,1516422911.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:11.648Z,1516422911.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:12.047Z,1516422912.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:12.454Z,1516422912.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:12.845Z,1516422912.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:13.255Z,1516422913.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:13.658Z,1516422913.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:14.059Z,1516422914.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:14.463Z,1516422914.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:14.854Z,1516422914.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:15.262Z,1516422915.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:15.662Z,1516422915.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:16.058Z,1516422916.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:16.444Z,1516422916.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:16.859Z,1516422916.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:17.254Z,1516422917.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:17.656Z,1516422917.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:18.059Z,1516422918.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:18.458Z,1516422918.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:18.856Z,1516422918.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:19.263Z,1516422919.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:19.658Z,1516422919.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:20.054Z,1516422920.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:20.463Z,1516422920.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:20.855Z,1516422920.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:24.135Z,1516422924.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:24.266Z,1516422924.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:24.619Z,1516422924.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:25.019Z,1516422925.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:25.418Z,1516422925.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:25.822Z,1516422925.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:26.218Z,1516422926.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:26.618Z,1516422926.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:27.018Z,1516422927.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:27.418Z,1516422927.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:27.819Z,1516422927.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:28.226Z,1516422928.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:28.620Z,1516422928.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:29.019Z,1516422929.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:29.418Z,1516422929.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:29.818Z,1516422929.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:30.218Z,1516422930.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:30.626Z,1516422930.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:31.020Z,1516422931.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:31.426Z,1516422931.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:31.818Z,1516422931.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:32.218Z,1516422932.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:32.622Z,1516422932.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:33.022Z,1516422933.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:33.427Z,1516422933.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:33.821Z,1516422933.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:34.218Z,1516422934.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:34.618Z,1516422934.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:35.021Z,1516422935.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:35.422Z,1516422935.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:35.820Z,1516422935.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:36.227Z,1516422936.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:36.627Z,1516422936.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:37.012Z,1516422937.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:37.415Z,1516422937.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:37.814Z,1516422937.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:38.215Z,1516422938.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:38.620Z,1516422938.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:39.019Z,1516422939.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:39.424Z,1516422939.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:39.823Z,1516422939.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:40.226Z,1516422940.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:40.619Z,1516422940.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:41.021Z,1516422941.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:41.421Z,1516422941.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:41.808Z,1516422941.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:42.227Z,1516422942.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:42.627Z,1516422942.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:42.656Z,1516422942.656 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:35:42.656Z,1516422942.656 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53
2018-01-20T04:35:42.656Z,1516422942.656 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:35:42.693Z,1516422942.693 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:35:43.011Z,1516422943.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:43.069Z,1516422943.069 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:35:43.070Z,1516422943.070 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53
2018-01-20T04:35:43.416Z,1516422943.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:43.458Z,1516422943.458 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:35:43.459Z,1516422943.459 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:35:43.459Z,1516422943.459 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:35:43.814Z,1516422943.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:44.211Z,1516422944.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:44.620Z,1516422944.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:45.020Z,1516422945.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:45.421Z,1516422945.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:45.827Z,1516422945.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:46.225Z,1516422946.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:46.625Z,1516422946.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:47.024Z,1516422947.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:47.422Z,1516422947.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:47.819Z,1516422947.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:48.223Z,1516422948.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:48.621Z,1516422948.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:49.023Z,1516422949.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:49.428Z,1516422949.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:49.818Z,1516422949.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:50.212Z,1516422950.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:50.611Z,1516422950.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:51.020Z,1516422951.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:51.412Z,1516422951.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:51.812Z,1516422951.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:52.216Z,1516422952.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:52.611Z,1516422952.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:53.011Z,1516422953.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:53.428Z,1516422953.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:53.821Z,1516422953.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:54.222Z,1516422954.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:54.622Z,1516422954.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:55.018Z,1516422955.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:55.418Z,1516422955.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:55.821Z,1516422955.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:56.218Z,1516422956.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:56.618Z,1516422956.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:57.022Z,1516422957.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:57.419Z,1516422957.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:57.820Z,1516422957.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:58.218Z,1516422958.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:58.626Z,1516422958.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:59.012Z,1516422959.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:59.415Z,1516422959.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:35:59.811Z,1516422959.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:00.211Z,1516422960.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:00.619Z,1516422960.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:01.011Z,1516422961.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:01.419Z,1516422961.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:01.815Z,1516422961.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:02.219Z,1516422962.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:02.612Z,1516422962.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:03.014Z,1516422963.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:03.420Z,1516422963.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:03.823Z,1516422963.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:04.223Z,1516422964.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:04.619Z,1516422964.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:05.014Z,1516422965.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:05.421Z,1516422965.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:05.819Z,1516422965.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:06.218Z,1516422966.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:06.621Z,1516422966.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:07.023Z,1516422967.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:07.417Z,1516422967.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:07.821Z,1516422967.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:08.218Z,1516422968.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:08.620Z,1516422968.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:09.032Z,1516422969.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:09.422Z,1516422969.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:09.812Z,1516422969.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:10.218Z,1516422970.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:10.626Z,1516422970.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:11.012Z,1516422971.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:11.419Z,1516422971.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:11.811Z,1516422971.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:12.211Z,1516422972.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:12.619Z,1516422972.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:13.011Z,1516422973.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:13.419Z,1516422973.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:13.815Z,1516422973.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:14.219Z,1516422974.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:14.612Z,1516422974.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:15.015Z,1516422975.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:15.419Z,1516422975.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:15.815Z,1516422975.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:16.220Z,1516422976.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:16.618Z,1516422976.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:17.020Z,1516422977.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:17.428Z,1516422977.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:17.826Z,1516422977.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:18.227Z,1516422978.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:18.621Z,1516422978.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:19.023Z,1516422979.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:19.423Z,1516422979.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:19.821Z,1516422979.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:20.218Z,1516422980.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:20.621Z,1516422980.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:21.028Z,1516422981.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:24.292Z,1516422984.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:24.407Z,1516422984.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:24.803Z,1516422984.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:25.199Z,1516422985.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:25.596Z,1516422985.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:25.997Z,1516422985.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:26.394Z,1516422986.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:26.795Z,1516422986.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:27.197Z,1516422987.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:27.598Z,1516422987.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:27.994Z,1516422987.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:28.395Z,1516422988.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:28.794Z,1516422988.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:29.201Z,1516422989.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:29.599Z,1516422989.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:29.994Z,1516422989.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:30.394Z,1516422990.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:30.794Z,1516422990.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:31.202Z,1516422991.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:31.596Z,1516422991.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:31.994Z,1516422991.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:32.394Z,1516422992.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:32.794Z,1516422992.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:33.194Z,1516422993.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:33.602Z,1516422993.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:33.988Z,1516422993.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:34.403Z,1516422994.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:34.787Z,1516422994.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:35.187Z,1516422995.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:35.611Z,1516422995.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:35.987Z,1516422995.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:36.387Z,1516422996.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:36.791Z,1516422996.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:37.203Z,1516422997.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:37.588Z,1516422997.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:37.991Z,1516422997.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:38.387Z,1516422998.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:38.787Z,1516422998.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:39.191Z,1516422999.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:39.591Z,1516422999.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:39.991Z,1516422999.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:40.396Z,1516423000.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:40.791Z,1516423000.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:41.194Z,1516423001.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:41.601Z,1516423001.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:41.995Z,1516423001.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:42.395Z,1516423002.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:42.797Z,1516423002.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:43.199Z,1516423003.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:43.594Z,1516423003.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:43.998Z,1516423003.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:44.396Z,1516423004.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:44.791Z,1516423004.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:45.200Z,1516423005.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:45.599Z,1516423005.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:45.998Z,1516423005.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:46.395Z,1516423006.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:46.798Z,1516423006.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:47.195Z,1516423007.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:47.594Z,1516423007.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:47.995Z,1516423007.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:48.403Z,1516423008.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:48.795Z,1516423008.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:49.195Z,1516423009.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:49.594Z,1516423009.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:49.998Z,1516423009.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:50.394Z,1516423010.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:50.794Z,1516423010.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:51.198Z,1516423011.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:51.602Z,1516423011.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:52.002Z,1516423012.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:52.393Z,1516423012.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:52.794Z,1516423012.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:53.194Z,1516423013.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:53.595Z,1516423013.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:54.002Z,1516423014.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:54.394Z,1516423014.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:54.798Z,1516423014.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:55.194Z,1516423015.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:55.594Z,1516423015.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:55.998Z,1516423015.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:56.394Z,1516423016.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:56.794Z,1516423016.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:57.198Z,1516423017.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:57.599Z,1516423017.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:57.988Z,1516423017.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:58.386Z,1516423018.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:58.787Z,1516423018.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:59.187Z,1516423019.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:59.598Z,1516423019.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:36:59.987Z,1516423019.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:00.387Z,1516423020.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:00.786Z,1516423020.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:01.187Z,1516423021.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:01.587Z,1516423021.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:02.002Z,1516423022.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:02.402Z,1516423022.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:02.788Z,1516423022.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:03.186Z,1516423023.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:03.594Z,1516423023.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:03.988Z,1516423023.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:04.394Z,1516423024.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:04.794Z,1516423024.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:05.194Z,1516423025.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:05.586Z,1516423025.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:05.995Z,1516423025.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:06.394Z,1516423026.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:06.791Z,1516423026.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:07.195Z,1516423027.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:07.588Z,1516423027.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:07.994Z,1516423027.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:08.395Z,1516423028.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:08.787Z,1516423028.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:09.194Z,1516423029.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:09.599Z,1516423029.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:09.987Z,1516423029.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:10.402Z,1516423030.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:10.799Z,1516423030.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:11.194Z,1516423031.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:11.595Z,1516423031.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:11.997Z,1516423031.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:12.402Z,1516423032.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:12.794Z,1516423032.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:13.203Z,1516423033.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:13.595Z,1516423033.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:13.999Z,1516423033.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:14.404Z,1516423034.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:14.795Z,1516423034.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:15.196Z,1516423035.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:15.597Z,1516423035.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:16.003Z,1516423036.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:16.395Z,1516423036.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:16.804Z,1516423036.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:17.187Z,1516423037.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:17.590Z,1516423037.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:17.995Z,1516423037.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:18.386Z,1516423038.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:18.790Z,1516423038.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:19.195Z,1516423039.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:19.594Z,1516423039.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:19.990Z,1516423039.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:20.395Z,1516423040.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:20.791Z,1516423040.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:21.211Z,1516423041.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:24.474Z,1516423044.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:24.584Z,1516423044.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:24.987Z,1516423044.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:25.391Z,1516423045.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:25.783Z,1516423045.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:26.199Z,1516423046.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:26.592Z,1516423046.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:26.987Z,1516423046.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:27.387Z,1516423047.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:27.787Z,1516423047.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:28.193Z,1516423048.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:28.591Z,1516423048.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:28.986Z,1516423048.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:29.379Z,1516423049.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:29.778Z,1516423049.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:30.187Z,1516423050.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:30.578Z,1516423050.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:30.986Z,1516423050.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:31.387Z,1516423051.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:31.776Z,1516423051.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:32.182Z,1516423052.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:32.592Z,1516423052.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:32.990Z,1516423052.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:33.396Z,1516423053.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:33.792Z,1516423053.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:34.187Z,1516423054.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:34.592Z,1516423054.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:34.996Z,1516423054.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:35.379Z,1516423055.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:35.791Z,1516423055.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:36.183Z,1516423056.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:36.579Z,1516423056.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:36.994Z,1516423056.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:37.395Z,1516423057.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:37.779Z,1516423057.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:38.183Z,1516423058.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:38.583Z,1516423058.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:38.983Z,1516423058.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:39.382Z,1516423059.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:39.779Z,1516423059.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:40.183Z,1516423060.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:40.583Z,1516423060.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:40.981Z,1516423060.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:41.387Z,1516423061.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:41.783Z,1516423061.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:42.187Z,1516423062.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:42.578Z,1516423062.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:42.983Z,1516423062.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:43.386Z,1516423063.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:43.790Z,1516423063.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:44.179Z,1516423064.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:44.591Z,1516423064.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:44.987Z,1516423064.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:45.392Z,1516423065.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:45.779Z,1516423065.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:46.179Z,1516423066.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:46.587Z,1516423066.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:46.980Z,1516423066.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:47.387Z,1516423067.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:47.787Z,1516423067.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:48.187Z,1516423068.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:48.590Z,1516423068.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:49.038Z,1516423069.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:49.394Z,1516423069.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:49.791Z,1516423069.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:50.183Z,1516423070.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:50.577Z,1516423070.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:50.983Z,1516423070.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:51.390Z,1516423071.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:51.787Z,1516423071.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:52.189Z,1516423072.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:52.585Z,1516423072.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:52.990Z,1516423072.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:53.386Z,1516423073.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:53.778Z,1516423073.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:54.179Z,1516423074.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:54.579Z,1516423074.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:54.980Z,1516423074.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:55.394Z,1516423075.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:55.779Z,1516423075.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:56.182Z,1516423076.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:56.580Z,1516423076.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:56.979Z,1516423076.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:57.383Z,1516423077.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:57.779Z,1516423077.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:58.179Z,1516423078.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:58.578Z,1516423078.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:58.979Z,1516423078.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:59.379Z,1516423079.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:37:59.782Z,1516423079.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:00.186Z,1516423080.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:00.586Z,1516423080.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:00.982Z,1516423080.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:01.386Z,1516423081.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:01.787Z,1516423081.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:02.182Z,1516423082.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:02.579Z,1516423082.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:02.987Z,1516423082.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:03.378Z,1516423083.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:03.783Z,1516423083.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:04.191Z,1516423084.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:04.587Z,1516423084.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:04.988Z,1516423084.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:05.396Z,1516423085.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:05.793Z,1516423085.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:06.194Z,1516423086.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:06.586Z,1516423086.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:06.997Z,1516423086.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:07.394Z,1516423087.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:07.795Z,1516423087.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:08.183Z,1516423088.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:08.579Z,1516423088.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:08.983Z,1516423088.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:09.383Z,1516423089.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:09.779Z,1516423089.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:10.183Z,1516423090.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:10.583Z,1516423090.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:10.979Z,1516423090.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:11.383Z,1516423091.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:11.783Z,1516423091.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:12.183Z,1516423092.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:12.583Z,1516423092.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:12.991Z,1516423092.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:13.383Z,1516423093.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:13.786Z,1516423093.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:14.183Z,1516423094.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:14.583Z,1516423094.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:14.987Z,1516423094.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:15.391Z,1516423095.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:15.784Z,1516423095.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:16.191Z,1516423096.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:16.588Z,1516423096.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:16.992Z,1516423096.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:17.389Z,1516423097.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:17.786Z,1516423097.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:18.187Z,1516423098.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:18.591Z,1516423098.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:19.002Z,1516423099.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:19.386Z,1516423099.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:19.779Z,1516423099.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:20.183Z,1516423100.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:20.579Z,1516423100.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:20.621Z,1516423100.621 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T04:38:20.622Z,1516423100.622 [Default:CheckIn:C.Wait] Stopped
2018-01-20T04:38:20.622Z,1516423100.622 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T04:38:20.622Z,1516423100.622 [Default:CheckIn:D] Running Loop=1
2018-01-20T04:38:20.980Z,1516423100.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:21.017Z,1516423101.017 [Default:CheckIn:D] Stopped
2018-01-20T04:38:21.017Z,1516423101.017 [Default:CheckIn:E] Running Loop=1
2018-01-20T04:38:21.384Z,1516423101.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:21.426Z,1516423101.426 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 154.739779 min 
2018-01-20T04:38:21.426Z,1516423101.426 [Default:CheckIn:E] Stopped
2018-01-20T04:38:21.426Z,1516423101.426 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T04:38:21.426Z,1516423101.426 [Default:CheckIn] Stopped
2018-01-20T04:38:21.426Z,1516423101.426 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T04:38:21.426Z,1516423101.426 [Default:CheckIn](INFO): Running loop #16
2018-01-20T04:38:21.426Z,1516423101.426 [Default:CheckIn] Running Loop=16
2018-01-20T04:38:21.427Z,1516423101.427 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T04:38:21.427Z,1516423101.427 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T04:38:24.663Z,1516423104.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:24.765Z,1516423104.765 [NAL9602](INFO): Powering up
2018-01-20T04:38:24.825Z,1516423104.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:25.179Z,1516423105.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:25.579Z,1516423105.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:25.979Z,1516423105.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:25.991Z,1516423105.991 [PNI_TCM](ERROR): CRC does not match. Expected:0x6612 got:0x42089
2018-01-20T04:38:26.378Z,1516423106.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:26.778Z,1516423106.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:27.177Z,1516423107.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:27.578Z,1516423107.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:27.591Z,1516423107.591 [PNI_TCM](ERROR): CRC does not match. Expected:0x41514 got:0x49414
2018-01-20T04:38:27.979Z,1516423107.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:28.378Z,1516423108.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:28.771Z,1516423108.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:29.164Z,1516423109.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:29.572Z,1516423109.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:29.991Z,1516423109.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:30.374Z,1516423110.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:30.772Z,1516423110.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:31.176Z,1516423111.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:31.569Z,1516423111.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:31.975Z,1516423111.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:32.375Z,1516423112.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:32.764Z,1516423112.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:33.175Z,1516423113.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:33.579Z,1516423113.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:33.971Z,1516423113.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:34.376Z,1516423114.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:34.781Z,1516423114.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:35.180Z,1516423115.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:35.597Z,1516423115.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:35.958Z,1516423115.958 [NAL9602](INFO): NAL9602 initialized
2018-01-20T04:38:35.976Z,1516423115.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:36.381Z,1516423116.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:36.754Z,1516423116.754 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T04:38:36.754Z,1516423116.754 [NAL9602] Data Fault, FailCount= 2
2018-01-20T04:38:36.754Z,1516423116.754 [NAL9602](ERROR): Data Fault
2018-01-20T04:38:36.785Z,1516423116.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:36.848Z,1516423116.848 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T04:38:37.154Z,1516423117.154 [NAL9602](INFO): Powering down
2018-01-20T04:38:37.185Z,1516423117.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:37.578Z,1516423117.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:37.586Z,1516423117.586 [PNI_TCM](ERROR): CRC does not match. Expected:0x57546 got:0x3291
2018-01-20T04:38:37.974Z,1516423117.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:37.989Z,1516423117.989 [PNI_TCM](ERROR): CRC does not match. Expected:0x64337 got:0x19483
2018-01-20T04:38:38.034Z,1516423118.034 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T04:38:38.034Z,1516423118.034 [NAL9602] No Fault, FailCount= 2
2018-01-20T04:38:38.372Z,1516423118.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:38.782Z,1516423118.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:39.186Z,1516423119.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:39.571Z,1516423119.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:39.970Z,1516423119.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:40.368Z,1516423120.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:40.771Z,1516423120.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:41.174Z,1516423121.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:41.568Z,1516423121.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:41.971Z,1516423121.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:42.379Z,1516423122.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:42.766Z,1516423122.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:43.177Z,1516423123.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:43.572Z,1516423123.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:43.623Z,1516423123.623 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:38:43.623Z,1516423123.623 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54
2018-01-20T04:38:43.623Z,1516423123.623 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:38:43.648Z,1516423123.648 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:38:43.976Z,1516423123.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:44.032Z,1516423124.032 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:38:44.032Z,1516423124.032 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54
2018-01-20T04:38:44.378Z,1516423124.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:44.403Z,1516423124.403 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:38:44.404Z,1516423124.404 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:38:44.404Z,1516423124.404 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:38:44.774Z,1516423124.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:45.174Z,1516423125.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:45.574Z,1516423125.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:45.982Z,1516423125.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:46.382Z,1516423126.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:46.774Z,1516423126.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:47.183Z,1516423127.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:47.568Z,1516423127.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:47.987Z,1516423127.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:48.371Z,1516423128.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:48.768Z,1516423128.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:49.171Z,1516423129.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:49.570Z,1516423129.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:49.967Z,1516423129.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:50.375Z,1516423130.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:50.779Z,1516423130.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:51.179Z,1516423131.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:51.579Z,1516423131.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:51.975Z,1516423131.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:52.379Z,1516423132.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:52.777Z,1516423132.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:53.174Z,1516423133.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:53.576Z,1516423133.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:53.983Z,1516423133.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:54.374Z,1516423134.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:54.774Z,1516423134.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:55.174Z,1516423135.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:55.603Z,1516423135.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:55.970Z,1516423135.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:56.371Z,1516423136.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:56.780Z,1516423136.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:57.184Z,1516423137.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:57.597Z,1516423137.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:57.970Z,1516423137.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:58.373Z,1516423138.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:58.798Z,1516423138.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:59.184Z,1516423139.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:59.591Z,1516423139.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:38:59.972Z,1516423139.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:00.372Z,1516423140.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:00.772Z,1516423140.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:01.199Z,1516423141.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:01.572Z,1516423141.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:01.971Z,1516423141.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:02.392Z,1516423142.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:02.787Z,1516423142.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:03.180Z,1516423143.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:03.572Z,1516423143.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:03.972Z,1516423143.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:04.372Z,1516423144.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:04.799Z,1516423144.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:05.188Z,1516423145.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:05.572Z,1516423145.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:05.990Z,1516423145.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:06.380Z,1516423146.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:06.780Z,1516423146.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:07.178Z,1516423147.178 [NAL9602](INFO): Powering up NAL9602
2018-01-20T04:39:07.198Z,1516423147.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:07.579Z,1516423147.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:07.980Z,1516423147.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:08.382Z,1516423148.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:08.773Z,1516423148.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:09.173Z,1516423149.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:09.591Z,1516423149.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:09.971Z,1516423149.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:10.367Z,1516423150.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:10.771Z,1516423150.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:11.170Z,1516423151.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:11.571Z,1516423151.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:11.983Z,1516423151.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:12.378Z,1516423152.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:12.778Z,1516423152.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:13.177Z,1516423153.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:13.574Z,1516423153.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:13.979Z,1516423153.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:14.374Z,1516423154.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:14.779Z,1516423154.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:15.179Z,1516423155.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:15.575Z,1516423155.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:15.983Z,1516423155.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:16.376Z,1516423156.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:16.778Z,1516423156.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:17.167Z,1516423157.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:17.568Z,1516423157.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:17.991Z,1516423157.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:18.354Z,1516423158.354 [NAL9602](INFO): NAL9602 initialized
2018-01-20T04:39:18.371Z,1516423158.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:18.767Z,1516423158.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:19.191Z,1516423159.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:19.578Z,1516423159.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:19.991Z,1516423159.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:20.378Z,1516423160.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:20.779Z,1516423160.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:21.176Z,1516423161.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:21.586Z,1516423161.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:24.866Z,1516423164.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:24.922Z,1516423164.922 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T04:39:25.002Z,1516423165.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:25.360Z,1516423165.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:25.768Z,1516423165.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:26.167Z,1516423166.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:26.572Z,1516423166.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:26.972Z,1516423166.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:27.371Z,1516423167.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:27.755Z,1516423167.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:28.151Z,1516423168.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:28.552Z,1516423168.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:28.955Z,1516423168.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:29.351Z,1516423169.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:29.749Z,1516423169.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:30.155Z,1516423170.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:30.551Z,1516423170.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:30.953Z,1516423170.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:31.366Z,1516423171.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:31.762Z,1516423171.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:32.179Z,1516423172.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:32.566Z,1516423172.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:32.958Z,1516423172.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:33.359Z,1516423173.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:33.756Z,1516423173.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:34.156Z,1516423174.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:34.552Z,1516423174.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:34.964Z,1516423174.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:35.364Z,1516423175.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:35.758Z,1516423175.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:36.158Z,1516423176.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:36.574Z,1516423176.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:36.966Z,1516423176.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:37.374Z,1516423177.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:37.772Z,1516423177.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:38.159Z,1516423178.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:38.575Z,1516423178.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:38.960Z,1516423178.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:39.360Z,1516423179.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:39.756Z,1516423179.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:40.152Z,1516423180.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:40.549Z,1516423180.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:40.955Z,1516423180.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:41.358Z,1516423181.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:41.766Z,1516423181.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:42.166Z,1516423182.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:42.562Z,1516423182.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:42.973Z,1516423182.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:43.355Z,1516423183.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:43.751Z,1516423183.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:44.159Z,1516423184.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:44.555Z,1516423184.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:44.959Z,1516423184.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:45.359Z,1516423185.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:45.755Z,1516423185.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:46.158Z,1516423186.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:46.552Z,1516423186.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:46.980Z,1516423186.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:47.379Z,1516423187.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:47.766Z,1516423187.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:48.174Z,1516423188.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:48.555Z,1516423188.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:48.950Z,1516423188.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:49.360Z,1516423189.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:49.755Z,1516423189.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:50.154Z,1516423190.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:50.557Z,1516423190.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:50.964Z,1516423190.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:51.366Z,1516423191.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:51.758Z,1516423191.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:52.178Z,1516423192.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:52.570Z,1516423192.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:52.971Z,1516423192.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:53.375Z,1516423193.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:53.752Z,1516423193.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:54.155Z,1516423194.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:54.559Z,1516423194.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:54.949Z,1516423194.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:55.363Z,1516423195.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:55.755Z,1516423195.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:56.159Z,1516423196.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:56.555Z,1516423196.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:56.970Z,1516423196.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:57.370Z,1516423197.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:57.767Z,1516423197.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:58.160Z,1516423198.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:58.569Z,1516423198.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:58.974Z,1516423198.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:59.361Z,1516423199.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:39:59.757Z,1516423199.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:00.163Z,1516423200.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:00.569Z,1516423200.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:00.958Z,1516423200.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:01.363Z,1516423201.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:01.768Z,1516423201.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:02.166Z,1516423202.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:02.555Z,1516423202.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:03.003Z,1516423203.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:03.356Z,1516423203.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:03.759Z,1516423203.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:04.156Z,1516423204.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:04.553Z,1516423204.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:04.968Z,1516423204.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:05.364Z,1516423205.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:05.754Z,1516423205.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:06.158Z,1516423206.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:06.564Z,1516423206.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:06.956Z,1516423206.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:07.373Z,1516423207.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:07.774Z,1516423207.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:08.164Z,1516423208.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:08.562Z,1516423208.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:08.969Z,1516423208.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:09.361Z,1516423209.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:09.763Z,1516423209.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:10.176Z,1516423210.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:10.555Z,1516423210.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:10.971Z,1516423210.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:11.357Z,1516423211.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:11.782Z,1516423211.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:12.178Z,1516423212.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:12.558Z,1516423212.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:12.971Z,1516423212.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:13.366Z,1516423213.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:13.754Z,1516423213.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:14.160Z,1516423214.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:14.556Z,1516423214.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:14.953Z,1516423214.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:15.359Z,1516423215.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:15.783Z,1516423215.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:16.164Z,1516423216.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:16.570Z,1516423216.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:16.982Z,1516423216.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:17.364Z,1516423217.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:17.763Z,1516423217.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:18.166Z,1516423218.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:18.564Z,1516423218.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:18.962Z,1516423218.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:19.362Z,1516423219.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:19.770Z,1516423219.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:20.157Z,1516423220.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:20.577Z,1516423220.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:20.973Z,1516423220.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:21.379Z,1516423221.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:21.775Z,1516423221.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:25.139Z,1516423225.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:25.253Z,1516423225.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:25.666Z,1516423225.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:26.077Z,1516423226.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:26.457Z,1516423226.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:26.866Z,1516423226.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:27.247Z,1516423227.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:27.640Z,1516423227.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:28.048Z,1516423228.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:28.449Z,1516423228.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:28.847Z,1516423228.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:29.256Z,1516423229.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:29.650Z,1516423229.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:30.056Z,1516423230.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:30.447Z,1516423230.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:30.863Z,1516423230.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:31.265Z,1516423231.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:31.660Z,1516423231.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:32.063Z,1516423232.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:32.439Z,1516423232.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:32.847Z,1516423232.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:33.244Z,1516423233.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:33.641Z,1516423233.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:34.047Z,1516423234.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:34.444Z,1516423234.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:34.843Z,1516423234.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:35.251Z,1516423235.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:35.652Z,1516423235.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:36.065Z,1516423236.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:36.454Z,1516423236.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:36.855Z,1516423236.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:37.255Z,1516423237.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:37.651Z,1516423237.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:38.054Z,1516423238.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:38.446Z,1516423238.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:38.855Z,1516423238.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:39.250Z,1516423239.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:39.655Z,1516423239.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:40.052Z,1516423240.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:40.458Z,1516423240.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:40.839Z,1516423240.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:41.258Z,1516423241.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:41.657Z,1516423241.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:42.068Z,1516423242.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:42.458Z,1516423242.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:42.847Z,1516423242.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:43.240Z,1516423243.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:43.644Z,1516423243.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:44.048Z,1516423244.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:44.445Z,1516423244.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:44.852Z,1516423244.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:45.252Z,1516423245.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:45.645Z,1516423245.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:46.052Z,1516423246.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:46.458Z,1516423246.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:46.858Z,1516423246.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:47.270Z,1516423247.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:47.666Z,1516423247.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:48.038Z,1516423248.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:48.447Z,1516423248.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:48.839Z,1516423248.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:49.246Z,1516423249.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:49.642Z,1516423249.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:50.039Z,1516423250.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:50.442Z,1516423250.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:50.851Z,1516423250.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:51.252Z,1516423251.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:51.662Z,1516423251.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:52.066Z,1516423252.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:52.462Z,1516423252.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:52.850Z,1516423252.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:53.249Z,1516423253.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:53.646Z,1516423253.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:54.045Z,1516423254.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:54.451Z,1516423254.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:54.846Z,1516423254.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:55.242Z,1516423255.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:55.658Z,1516423255.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:56.048Z,1516423256.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:56.454Z,1516423256.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:56.862Z,1516423256.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:57.259Z,1516423257.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:57.662Z,1516423257.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:58.065Z,1516423258.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:58.439Z,1516423258.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:58.838Z,1516423258.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:59.243Z,1516423259.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:40:59.655Z,1516423259.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:00.055Z,1516423260.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:00.443Z,1516423260.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:00.843Z,1516423260.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:01.255Z,1516423261.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:01.661Z,1516423261.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:02.058Z,1516423262.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:02.463Z,1516423262.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:02.843Z,1516423262.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:03.255Z,1516423263.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:03.643Z,1516423263.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:04.043Z,1516423264.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:04.439Z,1516423264.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:04.860Z,1516423264.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:05.269Z,1516423265.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:05.647Z,1516423265.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:06.043Z,1516423266.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:06.443Z,1516423266.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:06.839Z,1516423266.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:07.247Z,1516423267.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:07.660Z,1516423267.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:08.039Z,1516423268.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:08.448Z,1516423268.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:08.843Z,1516423268.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:09.239Z,1516423269.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:09.648Z,1516423269.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:10.043Z,1516423270.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:10.439Z,1516423270.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:10.847Z,1516423270.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:11.243Z,1516423271.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:11.639Z,1516423271.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:12.043Z,1516423272.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:12.443Z,1516423272.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:12.839Z,1516423272.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:13.243Z,1516423273.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:13.654Z,1516423273.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:14.050Z,1516423274.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:14.463Z,1516423274.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:14.859Z,1516423274.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:15.239Z,1516423275.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:15.643Z,1516423275.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:16.043Z,1516423276.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:16.439Z,1516423276.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:16.854Z,1516423276.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:17.243Z,1516423277.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:17.663Z,1516423277.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:18.058Z,1516423278.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:18.443Z,1516423278.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:18.840Z,1516423278.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:19.240Z,1516423279.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:19.644Z,1516423279.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:20.055Z,1516423280.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:20.456Z,1516423280.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:20.843Z,1516423280.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:21.239Z,1516423281.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:21.641Z,1516423281.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:22.072Z,1516423282.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:25.338Z,1516423285.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:25.479Z,1516423285.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:25.860Z,1516423285.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:26.249Z,1516423286.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:26.651Z,1516423286.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:27.047Z,1516423287.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:27.448Z,1516423287.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:27.851Z,1516423287.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:28.249Z,1516423288.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:28.646Z,1516423288.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:29.056Z,1516423289.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:29.456Z,1516423289.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:29.853Z,1516423289.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:30.262Z,1516423290.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:30.667Z,1516423290.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:31.059Z,1516423291.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:31.455Z,1516423291.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:31.855Z,1516423291.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:32.241Z,1516423292.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:32.646Z,1516423292.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:33.041Z,1516423293.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:33.441Z,1516423293.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:33.842Z,1516423293.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:34.241Z,1516423294.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:34.660Z,1516423294.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:35.060Z,1516423295.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:35.463Z,1516423295.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:35.864Z,1516423295.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:36.241Z,1516423296.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:36.641Z,1516423296.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:37.041Z,1516423297.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:37.462Z,1516423297.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:37.841Z,1516423297.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:38.242Z,1516423298.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:38.639Z,1516423298.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:39.050Z,1516423299.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:39.441Z,1516423299.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:39.853Z,1516423299.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:40.256Z,1516423300.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:40.667Z,1516423300.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:41.052Z,1516423301.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:41.446Z,1516423301.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:41.847Z,1516423301.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:42.255Z,1516423302.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:42.647Z,1516423302.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:43.046Z,1516423303.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:43.440Z,1516423303.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:43.850Z,1516423303.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:44.246Z,1516423304.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:44.640Z,1516423304.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:44.677Z,1516423304.677 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:41:44.677Z,1516423304.677 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55
2018-01-20T04:41:44.677Z,1516423304.677 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:41:44.707Z,1516423304.707 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:41:45.058Z,1516423305.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:45.115Z,1516423305.115 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:41:45.115Z,1516423305.115 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55
2018-01-20T04:41:45.461Z,1516423305.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:45.483Z,1516423305.483 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:41:45.483Z,1516423305.483 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:41:45.484Z,1516423305.484 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:41:45.860Z,1516423305.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:46.262Z,1516423306.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:46.646Z,1516423306.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:47.046Z,1516423307.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:47.445Z,1516423307.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:47.848Z,1516423307.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:48.248Z,1516423308.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:48.647Z,1516423308.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:49.044Z,1516423309.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:49.439Z,1516423309.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:49.847Z,1516423309.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:50.257Z,1516423310.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:50.650Z,1516423310.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:51.042Z,1516423311.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:51.431Z,1516423311.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:51.829Z,1516423311.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:52.245Z,1516423312.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:52.641Z,1516423312.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:53.056Z,1516423313.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:53.464Z,1516423313.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:53.847Z,1516423313.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:54.264Z,1516423314.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:54.641Z,1516423314.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:55.041Z,1516423315.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:55.430Z,1516423315.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:55.841Z,1516423315.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:56.243Z,1516423316.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:56.632Z,1516423316.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:57.045Z,1516423317.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:57.448Z,1516423317.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:57.855Z,1516423317.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:58.258Z,1516423318.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:58.658Z,1516423318.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:59.055Z,1516423319.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:59.453Z,1516423319.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:41:59.845Z,1516423319.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:00.244Z,1516423320.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:00.646Z,1516423320.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:01.046Z,1516423321.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:01.440Z,1516423321.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:01.847Z,1516423321.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:02.259Z,1516423322.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:02.629Z,1516423322.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:03.064Z,1516423323.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:03.461Z,1516423323.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:03.861Z,1516423323.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:04.255Z,1516423324.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:04.641Z,1516423324.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:05.032Z,1516423325.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:05.445Z,1516423325.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:05.841Z,1516423325.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:06.230Z,1516423326.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:06.649Z,1516423326.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:07.048Z,1516423327.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:07.449Z,1516423327.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:07.846Z,1516423327.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:08.255Z,1516423328.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:08.656Z,1516423328.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:09.058Z,1516423329.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:09.458Z,1516423329.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:09.841Z,1516423329.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:10.249Z,1516423330.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:10.650Z,1516423330.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:11.039Z,1516423331.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:11.449Z,1516423331.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:11.840Z,1516423331.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:12.240Z,1516423332.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:12.644Z,1516423332.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:13.031Z,1516423333.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:13.451Z,1516423333.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:13.858Z,1516423333.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:14.264Z,1516423334.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:14.656Z,1516423334.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:15.040Z,1516423335.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:15.443Z,1516423335.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:15.838Z,1516423335.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:16.242Z,1516423336.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:16.632Z,1516423336.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:17.039Z,1516423337.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:17.462Z,1516423337.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:17.831Z,1516423337.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:18.230Z,1516423338.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:18.656Z,1516423338.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:19.065Z,1516423339.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:19.454Z,1516423339.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:19.865Z,1516423339.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:20.232Z,1516423340.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:20.642Z,1516423340.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:21.046Z,1516423341.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:21.447Z,1516423341.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:21.840Z,1516423341.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:22.246Z,1516423342.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:25.518Z,1516423345.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:25.659Z,1516423345.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:26.026Z,1516423346.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:26.430Z,1516423346.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:26.809Z,1516423346.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:27.209Z,1516423347.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:27.612Z,1516423347.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:28.006Z,1516423348.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:28.409Z,1516423348.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:28.811Z,1516423348.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:29.212Z,1516423349.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:29.611Z,1516423349.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:30.013Z,1516423350.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:30.417Z,1516423350.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:30.821Z,1516423350.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:31.222Z,1516423351.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:31.622Z,1516423351.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:32.010Z,1516423352.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:32.412Z,1516423352.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:32.809Z,1516423352.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:33.206Z,1516423353.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:33.612Z,1516423353.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:34.014Z,1516423354.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:34.410Z,1516423354.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:34.800Z,1516423354.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:35.200Z,1516423355.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:35.627Z,1516423355.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:36.024Z,1516423356.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:36.428Z,1516423356.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:36.823Z,1516423356.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:37.203Z,1516423357.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:37.603Z,1516423357.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:38.007Z,1516423358.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:38.402Z,1516423358.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:38.802Z,1516423358.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:39.207Z,1516423359.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:39.599Z,1516423359.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:39.999Z,1516423359.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:40.411Z,1516423360.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:40.824Z,1516423360.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:41.222Z,1516423361.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:41.622Z,1516423361.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:42.027Z,1516423362.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:42.411Z,1516423362.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:42.815Z,1516423362.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:43.211Z,1516423363.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:43.607Z,1516423363.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:44.011Z,1516423364.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:44.403Z,1516423364.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:44.798Z,1516423364.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:45.208Z,1516423365.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:45.605Z,1516423365.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:46.018Z,1516423366.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:46.422Z,1516423366.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:46.826Z,1516423366.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:47.214Z,1516423367.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:47.616Z,1516423367.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:48.012Z,1516423368.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:48.404Z,1516423368.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:48.816Z,1516423368.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:49.212Z,1516423369.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:49.602Z,1516423369.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:50.012Z,1516423370.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:50.420Z,1516423370.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:50.809Z,1516423370.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:51.222Z,1516423371.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:51.627Z,1516423371.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:52.014Z,1516423372.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:52.426Z,1516423372.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:52.820Z,1516423372.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:53.199Z,1516423373.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:53.605Z,1516423373.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:54.020Z,1516423374.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:54.400Z,1516423374.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:54.805Z,1516423374.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:55.219Z,1516423375.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:55.601Z,1516423375.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:56.007Z,1516423376.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:56.423Z,1516423376.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:56.815Z,1516423376.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:57.226Z,1516423377.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:57.629Z,1516423377.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:58.009Z,1516423378.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:58.413Z,1516423378.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:58.806Z,1516423378.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:59.207Z,1516423379.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:42:59.609Z,1516423379.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:00.014Z,1516423380.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:00.413Z,1516423380.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:00.811Z,1516423380.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:01.212Z,1516423381.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:01.614Z,1516423381.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:02.022Z,1516423382.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:02.422Z,1516423382.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:02.827Z,1516423382.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:03.204Z,1516423383.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:03.613Z,1516423383.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:04.001Z,1516423384.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:04.403Z,1516423384.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:04.804Z,1516423384.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:04.826Z,1516423384.826 [PNI_TCM](ERROR): CRC does not match. Expected:0x12874 got:0x676
2018-01-20T04:43:05.218Z,1516423385.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:05.608Z,1516423385.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:06.003Z,1516423386.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:06.403Z,1516423386.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:06.419Z,1516423386.419 [PNI_TCM](ERROR): CRC does not match. Expected:0x46800 got:0x39359
2018-01-20T04:43:06.822Z,1516423386.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:07.225Z,1516423387.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:07.619Z,1516423387.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:08.022Z,1516423388.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:08.421Z,1516423388.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:08.800Z,1516423388.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:09.207Z,1516423389.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:09.607Z,1516423389.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:09.629Z,1516423389.629 [PNI_TCM](ERROR): CRC does not match. Expected:0x53856 got:0x7361
2018-01-20T04:43:10.020Z,1516423390.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:10.405Z,1516423390.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:10.807Z,1516423390.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:11.211Z,1516423391.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:11.609Z,1516423391.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:12.015Z,1516423392.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:12.427Z,1516423392.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:12.819Z,1516423392.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:13.228Z,1516423393.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:13.619Z,1516423393.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:14.011Z,1516423394.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:14.416Z,1516423394.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:14.799Z,1516423394.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:15.222Z,1516423395.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:15.599Z,1516423395.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:16.003Z,1516423396.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:16.403Z,1516423396.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:16.821Z,1516423396.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:17.226Z,1516423397.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:17.622Z,1516423397.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:18.019Z,1516423398.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:18.429Z,1516423398.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:18.802Z,1516423398.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:19.199Z,1516423399.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:19.598Z,1516423399.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:20.007Z,1516423400.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:20.399Z,1516423400.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:20.807Z,1516423400.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:21.203Z,1516423401.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:21.599Z,1516423401.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:21.645Z,1516423401.645 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T04:38:21.4Z
2018-01-20T04:43:21.645Z,1516423401.645 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T04:43:21.645Z,1516423401.645 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T04:43:22.007Z,1516423402.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:22.487Z,1516423402.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:25.690Z,1516423405.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:25.789Z,1516423405.789 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0192.lzma
2018-01-20T04:43:25.823Z,1516423405.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:26.197Z,1516423406.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:26.559Z,1516423406.559 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0192.lzma.bak
2018-01-20T04:43:26.559Z,1516423406.559 [DataOverHttps](INFO): SBD MOMSN=7726437
2018-01-20T04:43:26.608Z,1516423406.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:27.187Z,1516423407.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:27.405Z,1516423407.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:30.674Z,1516423410.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:30.806Z,1516423410.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:31.194Z,1516423411.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:31.594Z,1516423411.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:31.975Z,1516423411.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:32.379Z,1516423412.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:35.659Z,1516423415.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:35.761Z,1516423415.761 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180119T210901/Express0193.lzma
2018-01-20T04:43:35.803Z,1516423415.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:36.166Z,1516423416.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:36.531Z,1516423416.531 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0193.lzma.bak
2018-01-20T04:43:36.531Z,1516423416.531 [DataOverHttps](INFO): SBD MOMSN=7726439
2018-01-20T04:43:36.565Z,1516423416.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:37.058Z,1516423417.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:37.099Z,1516423417.099 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T04:43:37.099Z,1516423417.099 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T04:43:37.099Z,1516423417.099 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T04:43:37.355Z,1516423417.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:40.674Z,1516423420.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:40.814Z,1516423420.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:41.170Z,1516423421.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:41.578Z,1516423421.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:41.957Z,1516423421.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:42.358Z,1516423422.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:42.765Z,1516423422.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:43.154Z,1516423423.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:43.558Z,1516423423.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:43.957Z,1516423423.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:44.350Z,1516423424.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:44.764Z,1516423424.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:45.147Z,1516423425.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:45.564Z,1516423425.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:45.974Z,1516423425.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:46.374Z,1516423426.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:46.764Z,1516423426.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:47.153Z,1516423427.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:47.553Z,1516423427.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:47.956Z,1516423427.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:48.353Z,1516423428.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:48.751Z,1516423428.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:49.146Z,1516423429.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:49.555Z,1516423429.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:49.949Z,1516423429.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:50.351Z,1516423430.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:50.766Z,1516423430.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:51.176Z,1516423431.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:51.557Z,1516423431.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:51.978Z,1516423431.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:52.352Z,1516423432.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:52.753Z,1516423432.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:53.152Z,1516423433.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:53.552Z,1516423433.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:53.953Z,1516423433.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:54.366Z,1516423434.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:54.758Z,1516423434.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:55.158Z,1516423435.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:55.561Z,1516423435.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:55.972Z,1516423435.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:56.371Z,1516423436.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:56.772Z,1516423436.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:57.164Z,1516423437.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:57.553Z,1516423437.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:57.966Z,1516423437.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:58.358Z,1516423438.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:58.760Z,1516423438.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:59.174Z,1516423439.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:59.553Z,1516423439.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:43:59.953Z,1516423439.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:00.353Z,1516423440.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:00.753Z,1516423440.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:01.164Z,1516423441.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:01.564Z,1516423441.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:01.968Z,1516423441.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:02.368Z,1516423442.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:02.770Z,1516423442.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:03.157Z,1516423443.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:03.559Z,1516423443.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:03.958Z,1516423443.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:04.360Z,1516423444.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:04.747Z,1516423444.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:05.157Z,1516423445.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:05.564Z,1516423445.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:05.950Z,1516423445.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:06.369Z,1516423446.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:06.770Z,1516423446.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:07.164Z,1516423447.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:07.574Z,1516423447.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:07.951Z,1516423447.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:08.347Z,1516423448.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:08.759Z,1516423448.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:09.159Z,1516423449.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:09.549Z,1516423449.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:09.965Z,1516423449.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:10.359Z,1516423450.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:10.753Z,1516423450.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:11.160Z,1516423451.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:11.567Z,1516423451.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:11.963Z,1516423451.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:12.374Z,1516423452.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:12.771Z,1516423452.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:13.146Z,1516423453.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:13.551Z,1516423453.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:13.965Z,1516423453.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:14.346Z,1516423454.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:14.751Z,1516423454.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:15.154Z,1516423455.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:15.546Z,1516423455.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:15.952Z,1516423455.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:16.355Z,1516423456.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:16.757Z,1516423456.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:17.176Z,1516423457.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:17.578Z,1516423457.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:17.974Z,1516423457.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:18.363Z,1516423458.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:18.758Z,1516423458.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:19.156Z,1516423459.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:19.560Z,1516423459.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:19.960Z,1516423459.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:20.360Z,1516423460.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:20.761Z,1516423460.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:21.157Z,1516423461.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:21.550Z,1516423461.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:21.938Z,1516423461.938 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T04:44:21.974Z,1516423461.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:22.357Z,1516423462.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:22.750Z,1516423462.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:23.163Z,1516423463.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:23.555Z,1516423463.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:23.955Z,1516423463.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:24.355Z,1516423464.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:24.762Z,1516423464.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:25.154Z,1516423465.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:25.558Z,1516423465.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:25.944Z,1516423465.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:26.362Z,1516423466.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:26.755Z,1516423466.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:27.156Z,1516423467.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:27.554Z,1516423467.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:27.959Z,1516423467.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:28.358Z,1516423468.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:28.754Z,1516423468.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:29.160Z,1516423469.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:29.554Z,1516423469.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:29.954Z,1516423469.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:30.370Z,1516423470.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:30.748Z,1516423470.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:31.151Z,1516423471.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:31.546Z,1516423471.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:31.947Z,1516423471.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:32.347Z,1516423472.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:32.750Z,1516423472.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:33.148Z,1516423473.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:33.558Z,1516423473.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:33.958Z,1516423473.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:34.355Z,1516423474.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:34.759Z,1516423474.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:35.158Z,1516423475.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:35.554Z,1516423475.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:35.959Z,1516423475.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:36.354Z,1516423476.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:36.754Z,1516423476.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:37.157Z,1516423477.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:37.556Z,1516423477.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:40.821Z,1516423480.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:40.944Z,1516423480.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:41.316Z,1516423481.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:41.714Z,1516423481.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:42.114Z,1516423482.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:42.523Z,1516423482.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:42.914Z,1516423482.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:43.314Z,1516423483.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:43.714Z,1516423483.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:44.114Z,1516423484.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:44.514Z,1516423484.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:44.914Z,1516423484.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:45.316Z,1516423485.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:45.715Z,1516423485.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:45.734Z,1516423485.734 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:44:45.734Z,1516423485.734 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 56
2018-01-20T04:44:45.734Z,1516423485.734 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:44:45.747Z,1516423485.747 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:44:46.117Z,1516423486.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:46.172Z,1516423486.172 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:44:46.172Z,1516423486.172 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 56
2018-01-20T04:44:46.514Z,1516423486.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:46.532Z,1516423486.532 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:44:46.533Z,1516423486.533 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:44:46.533Z,1516423486.533 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:44:46.907Z,1516423486.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:47.322Z,1516423487.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:47.704Z,1516423487.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:48.107Z,1516423488.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:48.506Z,1516423488.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:48.908Z,1516423488.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:49.315Z,1516423489.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:49.715Z,1516423489.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:50.120Z,1516423490.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:50.514Z,1516423490.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:50.914Z,1516423490.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:51.314Z,1516423491.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:51.720Z,1516423491.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:52.114Z,1516423492.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:52.490Z,1516423492.490 [NAL9602](INFO): Powering down
2018-01-20T04:44:52.530Z,1516423492.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:52.919Z,1516423492.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:53.319Z,1516423493.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:53.704Z,1516423493.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:54.123Z,1516423494.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:54.523Z,1516423494.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:54.907Z,1516423494.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:55.311Z,1516423495.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:55.715Z,1516423495.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:56.119Z,1516423496.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:56.512Z,1516423496.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:56.915Z,1516423496.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:57.313Z,1516423497.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:57.716Z,1516423497.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:58.116Z,1516423498.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:58.513Z,1516423498.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:58.917Z,1516423498.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:59.327Z,1516423499.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:44:59.714Z,1516423499.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:00.117Z,1516423500.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:00.514Z,1516423500.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:00.914Z,1516423500.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:01.317Z,1516423501.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:01.717Z,1516423501.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:02.114Z,1516423502.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:02.523Z,1516423502.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:02.914Z,1516423502.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:03.307Z,1516423503.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:03.723Z,1516423503.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:04.114Z,1516423504.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:04.507Z,1516423504.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:04.924Z,1516423504.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:05.314Z,1516423505.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:05.711Z,1516423505.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:06.112Z,1516423506.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:06.511Z,1516423506.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:06.907Z,1516423506.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:07.311Z,1516423507.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:07.711Z,1516423507.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:08.115Z,1516423508.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:08.508Z,1516423508.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:08.915Z,1516423508.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:09.308Z,1516423509.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:09.710Z,1516423509.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:10.113Z,1516423510.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:10.508Z,1516423510.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:10.908Z,1516423510.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:11.320Z,1516423511.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:11.715Z,1516423511.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:12.113Z,1516423512.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:12.519Z,1516423512.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:12.914Z,1516423512.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:13.316Z,1516423513.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:13.715Z,1516423513.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:14.114Z,1516423514.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:14.514Z,1516423514.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:14.913Z,1516423514.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:15.314Z,1516423515.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:15.707Z,1516423515.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:16.123Z,1516423516.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:16.507Z,1516423516.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:16.907Z,1516423516.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:17.311Z,1516423517.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:17.707Z,1516423517.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:18.115Z,1516423518.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:18.511Z,1516423518.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:18.907Z,1516423518.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:19.307Z,1516423519.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:19.715Z,1516423519.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:20.107Z,1516423520.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:20.507Z,1516423520.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:20.911Z,1516423520.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:21.307Z,1516423521.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:21.708Z,1516423521.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:22.116Z,1516423522.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:22.511Z,1516423522.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:22.911Z,1516423522.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:23.319Z,1516423523.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:23.714Z,1516423523.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:24.113Z,1516423524.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:24.517Z,1516423524.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:24.922Z,1516423524.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:25.314Z,1516423525.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:25.713Z,1516423525.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:26.114Z,1516423526.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:26.514Z,1516423526.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:26.928Z,1516423526.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:27.307Z,1516423527.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:27.704Z,1516423527.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:28.111Z,1516423528.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:28.507Z,1516423528.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:28.907Z,1516423528.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:29.311Z,1516423529.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:29.714Z,1516423529.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:30.108Z,1516423530.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:30.515Z,1516423530.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:30.907Z,1516423530.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:31.314Z,1516423531.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:31.711Z,1516423531.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:32.114Z,1516423532.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:32.508Z,1516423532.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:32.911Z,1516423532.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:33.311Z,1516423533.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:33.705Z,1516423533.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:34.116Z,1516423534.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:34.511Z,1516423534.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:34.911Z,1516423534.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:35.314Z,1516423535.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:35.719Z,1516423535.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:36.112Z,1516423536.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:36.514Z,1516423536.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:36.914Z,1516423536.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:37.314Z,1516423537.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:37.717Z,1516423537.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:40.979Z,1516423540.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:41.103Z,1516423541.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:41.495Z,1516423541.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:41.891Z,1516423541.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:42.304Z,1516423542.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:42.692Z,1516423542.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:43.088Z,1516423543.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:43.494Z,1516423543.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:43.886Z,1516423543.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:44.295Z,1516423544.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:44.691Z,1516423544.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:45.099Z,1516423545.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:45.494Z,1516423545.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:45.876Z,1516423545.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:46.293Z,1516423546.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:46.683Z,1516423546.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:47.080Z,1516423547.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:47.487Z,1516423547.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:47.881Z,1516423547.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:48.286Z,1516423548.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:48.698Z,1516423548.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:49.083Z,1516423549.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:49.488Z,1516423549.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:49.884Z,1516423549.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:50.283Z,1516423550.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:50.680Z,1516423550.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:51.088Z,1516423551.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:51.481Z,1516423551.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:51.880Z,1516423551.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:52.283Z,1516423552.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:52.688Z,1516423552.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:53.082Z,1516423553.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:53.491Z,1516423553.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:53.890Z,1516423553.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:54.293Z,1516423554.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:54.692Z,1516423554.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:55.090Z,1516423555.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:55.494Z,1516423555.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:55.897Z,1516423555.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:56.293Z,1516423556.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:56.688Z,1516423556.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:57.098Z,1516423557.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:57.499Z,1516423557.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:57.889Z,1516423557.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:58.286Z,1516423558.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:58.695Z,1516423558.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:59.080Z,1516423559.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:59.495Z,1516423559.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:45:59.881Z,1516423559.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:00.283Z,1516423560.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:00.683Z,1516423560.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:01.086Z,1516423561.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:01.092Z,1516423561.092 [PNI_TCM](ERROR): CRC does not match. Expected:0x15580 got:0x49482
2018-01-20T04:46:01.486Z,1516423561.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:01.891Z,1516423561.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:02.283Z,1516423562.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:02.682Z,1516423562.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:02.690Z,1516423562.690 [PNI_TCM](ERROR): CRC does not match. Expected:0x45577 got:0x39330
2018-01-20T04:46:03.089Z,1516423563.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:03.484Z,1516423563.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:03.888Z,1516423563.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:04.293Z,1516423564.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:04.299Z,1516423564.299 [PNI_TCM](ERROR): CRC does not match. Expected:0x23186 got:0x19035
2018-01-20T04:46:04.687Z,1516423564.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:05.087Z,1516423565.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:05.490Z,1516423565.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:05.890Z,1516423565.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:05.897Z,1516423565.897 [PNI_TCM](ERROR): CRC does not match. Expected:0x49862 got:0x49482
2018-01-20T04:46:06.292Z,1516423566.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:06.694Z,1516423566.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:07.088Z,1516423567.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:07.500Z,1516423567.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:07.506Z,1516423567.506 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2018-01-20T04:46:07.902Z,1516423567.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:08.295Z,1516423568.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:08.694Z,1516423568.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:09.090Z,1516423569.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:09.099Z,1516423569.099 [PNI_TCM](ERROR): CRC does not match. Expected:0x30649 got:0x59797
2018-01-20T04:46:09.499Z,1516423569.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:09.890Z,1516423569.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:10.290Z,1516423570.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:10.679Z,1516423570.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:11.076Z,1516423571.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:11.484Z,1516423571.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:11.883Z,1516423571.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:12.283Z,1516423572.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:12.694Z,1516423572.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:13.089Z,1516423573.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:13.490Z,1516423573.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:13.891Z,1516423573.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:14.288Z,1516423574.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:14.687Z,1516423574.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:15.091Z,1516423575.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:15.487Z,1516423575.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:15.886Z,1516423575.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:16.304Z,1516423576.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:16.679Z,1516423576.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:17.076Z,1516423577.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:17.498Z,1516423577.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:17.879Z,1516423577.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:18.280Z,1516423578.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:18.703Z,1516423578.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:19.095Z,1516423579.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:19.479Z,1516423579.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:19.894Z,1516423579.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:20.279Z,1516423580.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:20.679Z,1516423580.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:21.087Z,1516423581.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:21.486Z,1516423581.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:21.876Z,1516423581.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:22.283Z,1516423582.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:22.686Z,1516423582.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:23.080Z,1516423583.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:23.486Z,1516423583.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:23.886Z,1516423583.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:24.282Z,1516423584.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:24.682Z,1516423584.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:25.083Z,1516423585.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:25.488Z,1516423585.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:25.888Z,1516423585.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:26.292Z,1516423586.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:26.687Z,1516423586.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:27.090Z,1516423587.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:27.493Z,1516423587.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:27.888Z,1516423587.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:28.285Z,1516423588.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:28.696Z,1516423588.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:29.088Z,1516423589.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:29.490Z,1516423589.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:29.891Z,1516423589.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:30.291Z,1516423590.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:30.690Z,1516423590.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:31.089Z,1516423591.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:31.489Z,1516423591.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:31.894Z,1516423591.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:32.283Z,1516423592.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:32.676Z,1516423592.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:33.082Z,1516423593.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:33.487Z,1516423593.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:33.880Z,1516423593.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:34.278Z,1516423594.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:34.687Z,1516423594.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:35.084Z,1516423595.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:35.490Z,1516423595.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:35.892Z,1516423595.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:36.290Z,1516423596.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:36.690Z,1516423596.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:37.089Z,1516423597.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:37.495Z,1516423597.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:37.902Z,1516423597.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:41.167Z,1516423601.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:41.280Z,1516423601.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:41.665Z,1516423601.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:42.067Z,1516423602.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:42.471Z,1516423602.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:42.871Z,1516423602.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:43.263Z,1516423603.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:43.663Z,1516423603.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:44.070Z,1516423604.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:44.463Z,1516423604.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:44.863Z,1516423604.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:45.267Z,1516423605.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:45.668Z,1516423605.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:46.066Z,1516423606.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:46.465Z,1516423606.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:46.868Z,1516423606.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:47.267Z,1516423607.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:47.669Z,1516423607.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:48.072Z,1516423608.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:48.471Z,1516423608.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:48.866Z,1516423608.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:49.269Z,1516423609.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:49.666Z,1516423609.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:50.070Z,1516423610.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:50.476Z,1516423610.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:50.868Z,1516423610.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:51.269Z,1516423611.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:51.675Z,1516423611.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:52.066Z,1516423612.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:52.470Z,1516423612.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:52.869Z,1516423612.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:53.259Z,1516423613.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:53.658Z,1516423613.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:54.066Z,1516423614.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:54.475Z,1516423614.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:54.863Z,1516423614.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:55.263Z,1516423615.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:55.663Z,1516423615.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:56.059Z,1516423616.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:56.476Z,1516423616.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:56.859Z,1516423616.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:57.264Z,1516423617.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:57.675Z,1516423617.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:58.063Z,1516423618.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:58.459Z,1516423618.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:58.867Z,1516423618.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:59.259Z,1516423619.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:46:59.663Z,1516423619.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:00.063Z,1516423620.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:00.463Z,1516423620.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:00.868Z,1516423620.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:01.271Z,1516423621.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:01.664Z,1516423621.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:02.068Z,1516423622.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:02.469Z,1516423622.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:02.868Z,1516423622.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:03.267Z,1516423623.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:03.666Z,1516423623.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:04.067Z,1516423624.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:04.466Z,1516423624.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:04.868Z,1516423624.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:05.266Z,1516423625.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:05.666Z,1516423625.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:06.073Z,1516423626.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:06.466Z,1516423626.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:06.871Z,1516423626.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:07.275Z,1516423627.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:07.667Z,1516423627.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:08.066Z,1516423628.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:08.466Z,1516423628.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:08.866Z,1516423628.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:09.270Z,1516423629.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:09.668Z,1516423629.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:10.066Z,1516423630.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:10.467Z,1516423630.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:10.868Z,1516423630.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:11.266Z,1516423631.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:11.670Z,1516423631.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:12.066Z,1516423632.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:12.474Z,1516423632.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:12.866Z,1516423632.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:13.274Z,1516423633.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:13.674Z,1516423633.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:14.070Z,1516423634.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:14.466Z,1516423634.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:14.866Z,1516423634.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:15.270Z,1516423635.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:15.668Z,1516423635.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:16.067Z,1516423636.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:16.470Z,1516423636.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:16.866Z,1516423636.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:17.275Z,1516423637.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:17.670Z,1516423637.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:18.066Z,1516423638.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:18.466Z,1516423638.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:18.866Z,1516423638.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:19.266Z,1516423639.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:19.666Z,1516423639.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:20.070Z,1516423640.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:20.475Z,1516423640.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:20.874Z,1516423640.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:21.266Z,1516423641.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:21.668Z,1516423641.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:22.071Z,1516423642.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:22.470Z,1516423642.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:22.866Z,1516423642.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:23.271Z,1516423643.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:23.670Z,1516423643.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:24.070Z,1516423644.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:24.469Z,1516423644.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:24.870Z,1516423644.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:25.274Z,1516423645.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:25.675Z,1516423645.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:26.069Z,1516423646.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:26.475Z,1516423646.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:26.870Z,1516423646.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:27.275Z,1516423647.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:27.656Z,1516423647.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:28.069Z,1516423648.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:28.469Z,1516423648.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:28.871Z,1516423648.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:29.275Z,1516423649.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:29.666Z,1516423649.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:30.066Z,1516423650.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:30.467Z,1516423650.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:30.863Z,1516423650.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:31.259Z,1516423651.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:31.667Z,1516423651.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:32.067Z,1516423652.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:32.467Z,1516423652.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:32.868Z,1516423652.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:33.271Z,1516423653.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:33.664Z,1516423653.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:34.068Z,1516423654.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:34.470Z,1516423654.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:34.868Z,1516423654.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:35.277Z,1516423655.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:35.677Z,1516423655.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:36.071Z,1516423656.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:36.470Z,1516423656.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:36.876Z,1516423656.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:37.276Z,1516423657.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:37.667Z,1516423657.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:38.067Z,1516423658.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:41.347Z,1516423661.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:41.467Z,1516423661.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:41.851Z,1516423661.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:42.253Z,1516423662.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:42.656Z,1516423662.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:43.057Z,1516423663.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:43.448Z,1516423663.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:43.849Z,1516423663.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:44.256Z,1516423664.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:44.640Z,1516423664.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:45.045Z,1516423665.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:45.444Z,1516423665.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:45.832Z,1516423665.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:46.245Z,1516423666.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:46.644Z,1516423666.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:46.680Z,1516423666.680 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:47:46.680Z,1516423666.680 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 57
2018-01-20T04:47:46.680Z,1516423666.680 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:47:46.693Z,1516423666.693 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:47:47.042Z,1516423667.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:47.098Z,1516423667.098 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:47:47.098Z,1516423667.098 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 57
2018-01-20T04:47:47.446Z,1516423667.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:47.481Z,1516423667.481 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:47:47.481Z,1516423667.481 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:47:47.481Z,1516423667.481 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:47:47.844Z,1516423667.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:48.244Z,1516423668.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:48.653Z,1516423668.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:49.048Z,1516423669.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:49.444Z,1516423669.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:49.848Z,1516423669.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:50.245Z,1516423670.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:50.641Z,1516423670.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:51.059Z,1516423671.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:51.445Z,1516423671.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:51.861Z,1516423671.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:52.260Z,1516423672.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:52.644Z,1516423672.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:53.048Z,1516423673.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:53.449Z,1516423673.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:53.845Z,1516423673.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:54.249Z,1516423674.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:54.646Z,1516423674.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:55.056Z,1516423675.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:55.446Z,1516423675.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:55.849Z,1516423675.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:56.253Z,1516423676.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:56.649Z,1516423676.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:57.048Z,1516423677.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:57.451Z,1516423677.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:57.856Z,1516423677.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:58.248Z,1516423678.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:58.646Z,1516423678.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:59.040Z,1516423679.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:59.440Z,1516423679.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:47:59.844Z,1516423679.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:00.240Z,1516423680.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:00.640Z,1516423680.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:01.044Z,1516423681.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:01.440Z,1516423681.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:01.840Z,1516423681.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:02.244Z,1516423682.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:02.640Z,1516423682.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:03.040Z,1516423683.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:03.447Z,1516423683.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:03.840Z,1516423683.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:04.248Z,1516423684.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:04.644Z,1516423684.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:05.048Z,1516423685.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:05.448Z,1516423685.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:05.845Z,1516423685.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:06.240Z,1516423686.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:06.642Z,1516423686.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:07.055Z,1516423687.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:07.449Z,1516423687.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:07.844Z,1516423687.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:08.251Z,1516423688.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:08.650Z,1516423688.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:09.050Z,1516423689.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:09.449Z,1516423689.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:09.852Z,1516423689.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:10.248Z,1516423690.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:10.649Z,1516423690.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:11.048Z,1516423691.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:11.448Z,1516423691.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:11.852Z,1516423691.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:12.249Z,1516423692.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:12.650Z,1516423692.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:13.049Z,1516423693.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:13.448Z,1516423693.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:13.846Z,1516423693.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:14.249Z,1516423694.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:14.648Z,1516423694.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:15.048Z,1516423695.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:15.446Z,1516423695.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:15.840Z,1516423695.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:16.248Z,1516423696.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:16.644Z,1516423696.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:17.040Z,1516423697.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:17.448Z,1516423697.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:17.844Z,1516423697.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:18.240Z,1516423698.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:18.642Z,1516423698.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:19.048Z,1516423699.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:19.451Z,1516423699.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:19.842Z,1516423699.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:20.244Z,1516423700.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:20.644Z,1516423700.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:21.032Z,1516423701.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:21.452Z,1516423701.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:21.853Z,1516423701.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:22.248Z,1516423702.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:22.652Z,1516423702.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:23.052Z,1516423703.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:23.452Z,1516423703.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:23.850Z,1516423703.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:24.253Z,1516423704.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:24.650Z,1516423704.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:25.053Z,1516423705.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:25.453Z,1516423705.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:25.848Z,1516423705.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:26.249Z,1516423706.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:26.649Z,1516423706.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:27.040Z,1516423707.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:27.449Z,1516423707.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:27.850Z,1516423707.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:28.249Z,1516423708.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:28.649Z,1516423708.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:29.050Z,1516423709.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:29.450Z,1516423709.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:29.850Z,1516423709.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:30.258Z,1516423710.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:30.643Z,1516423710.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:31.056Z,1516423711.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:31.463Z,1516423711.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:31.850Z,1516423711.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:32.246Z,1516423712.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:32.660Z,1516423712.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:33.042Z,1516423713.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:33.445Z,1516423713.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:33.841Z,1516423713.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:34.241Z,1516423714.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:34.645Z,1516423714.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:35.050Z,1516423715.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:35.450Z,1516423715.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:35.849Z,1516423715.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:36.252Z,1516423716.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:36.646Z,1516423716.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:37.051Z,1516423717.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:37.447Z,1516423717.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:37.487Z,1516423717.487 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T04:48:37.487Z,1516423717.487 [Default:CheckIn:C.Wait] Stopped
2018-01-20T04:48:37.487Z,1516423717.487 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T04:48:37.488Z,1516423717.488 [Default:CheckIn:D] Running Loop=1
2018-01-20T04:48:37.852Z,1516423717.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:37.874Z,1516423717.874 [Default:CheckIn:D] Stopped
2018-01-20T04:48:37.874Z,1516423717.874 [Default:CheckIn:E] Running Loop=1
2018-01-20T04:48:38.253Z,1516423718.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:38.273Z,1516423718.273 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 165.020801 min 
2018-01-20T04:48:38.274Z,1516423718.274 [Default:CheckIn:E] Stopped
2018-01-20T04:48:38.274Z,1516423718.274 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T04:48:38.274Z,1516423718.274 [Default:CheckIn] Stopped
2018-01-20T04:48:38.274Z,1516423718.274 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T04:48:38.274Z,1516423718.274 [Default:CheckIn](INFO): Running loop #17
2018-01-20T04:48:38.274Z,1516423718.274 [Default:CheckIn] Running Loop=17
2018-01-20T04:48:38.274Z,1516423718.274 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T04:48:38.275Z,1516423718.275 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T04:48:41.513Z,1516423721.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:41.618Z,1516423721.618 [NAL9602](INFO): Powering up
2018-01-20T04:48:41.636Z,1516423721.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:42.019Z,1516423722.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:42.419Z,1516423722.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:42.815Z,1516423722.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:43.217Z,1516423723.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:43.615Z,1516423723.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:44.015Z,1516423724.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:44.414Z,1516423724.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:44.823Z,1516423724.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:45.208Z,1516423725.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:45.628Z,1516423725.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:46.008Z,1516423726.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:46.421Z,1516423726.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:46.814Z,1516423726.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:47.208Z,1516423727.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:47.613Z,1516423727.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:48.011Z,1516423728.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:48.411Z,1516423728.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:48.811Z,1516423728.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:49.208Z,1516423729.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:49.612Z,1516423729.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:50.008Z,1516423730.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:50.420Z,1516423730.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:50.819Z,1516423730.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:51.207Z,1516423731.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:51.611Z,1516423731.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:52.014Z,1516423732.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:52.418Z,1516423732.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:52.794Z,1516423732.794 [NAL9602](INFO): NAL9602 initialized
2018-01-20T04:48:52.817Z,1516423732.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:53.222Z,1516423733.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:53.625Z,1516423733.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:54.026Z,1516423734.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:54.425Z,1516423734.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:54.807Z,1516423734.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:55.223Z,1516423735.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:55.607Z,1516423735.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:56.007Z,1516423736.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:56.422Z,1516423736.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:56.807Z,1516423736.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:57.207Z,1516423737.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:57.622Z,1516423737.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:58.007Z,1516423738.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:58.407Z,1516423738.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:58.822Z,1516423738.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:59.207Z,1516423739.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:48:59.609Z,1516423739.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:00.022Z,1516423740.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:00.407Z,1516423740.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:00.823Z,1516423740.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:01.218Z,1516423741.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:01.616Z,1516423741.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:02.018Z,1516423742.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:02.446Z,1516423742.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:02.821Z,1516423742.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:03.211Z,1516423743.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:03.642Z,1516423743.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:04.034Z,1516423744.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:04.413Z,1516423744.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:04.833Z,1516423744.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:05.213Z,1516423745.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:05.618Z,1516423745.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:06.020Z,1516423746.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:06.420Z,1516423746.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:06.822Z,1516423746.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:07.213Z,1516423747.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:07.629Z,1516423747.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:08.017Z,1516423748.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:08.421Z,1516423748.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:08.820Z,1516423748.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:09.222Z,1516423749.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:09.613Z,1516423749.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:10.012Z,1516423750.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:10.413Z,1516423750.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:10.829Z,1516423750.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:11.213Z,1516423751.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:11.635Z,1516423751.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:12.023Z,1516423752.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:12.418Z,1516423752.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:12.815Z,1516423752.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:13.209Z,1516423753.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:13.617Z,1516423753.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:14.016Z,1516423754.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:14.418Z,1516423754.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:14.822Z,1516423754.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:15.213Z,1516423755.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:15.613Z,1516423755.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:16.022Z,1516423756.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:16.415Z,1516423756.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:16.818Z,1516423756.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:17.217Z,1516423757.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:17.608Z,1516423757.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:18.007Z,1516423758.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:18.431Z,1516423758.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:18.807Z,1516423758.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:19.232Z,1516423759.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:19.611Z,1516423759.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:20.007Z,1516423760.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:20.406Z,1516423760.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:20.814Z,1516423760.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:21.211Z,1516423761.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:21.619Z,1516423761.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:22.019Z,1516423762.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:22.419Z,1516423762.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:22.819Z,1516423762.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:23.221Z,1516423763.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:23.621Z,1516423763.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:24.020Z,1516423764.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:24.419Z,1516423764.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:24.790Z,1516423764.790 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-01-20T04:49:24.869Z,1516423764.869 [NAL9602](FAULT): received: 
+CSQ:0

OK62, 2, 0, 0, 0

OK
2018-01-20T04:49:24.869Z,1516423764.869 [NAL9602] Data Fault, FailCount= 3
2018-01-20T04:49:24.869Z,1516423764.869 [NAL9602](ERROR): Data Fault
2018-01-20T04:49:24.887Z,1516423764.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:24.970Z,1516423764.970 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T04:49:24.970Z,1516423764.970 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T04:49:25.194Z,1516423765.194 [NAL9602](INFO): Powering down
2018-01-20T04:49:25.212Z,1516423765.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:25.624Z,1516423765.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:26.011Z,1516423766.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:26.078Z,1516423766.078 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T04:49:26.078Z,1516423766.078 [NAL9602] No Fault, FailCount= 3
2018-01-20T04:49:26.410Z,1516423766.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:26.808Z,1516423766.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:27.214Z,1516423767.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:27.610Z,1516423767.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:28.008Z,1516423768.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:28.415Z,1516423768.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:28.811Z,1516423768.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:29.204Z,1516423769.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:29.606Z,1516423769.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:30.010Z,1516423770.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:30.419Z,1516423770.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:30.818Z,1516423770.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:31.218Z,1516423771.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:31.615Z,1516423771.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:32.018Z,1516423772.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:32.418Z,1516423772.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:32.814Z,1516423772.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:33.210Z,1516423773.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:33.618Z,1516423773.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:34.014Z,1516423774.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:34.414Z,1516423774.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:34.818Z,1516423774.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:35.204Z,1516423775.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:35.622Z,1516423775.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:36.022Z,1516423776.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:36.418Z,1516423776.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:36.818Z,1516423776.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:37.210Z,1516423777.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:37.614Z,1516423777.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:38.019Z,1516423778.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:38.420Z,1516423778.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:41.679Z,1516423781.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:41.796Z,1516423781.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:42.184Z,1516423782.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:42.582Z,1516423782.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:42.980Z,1516423782.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:43.382Z,1516423783.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:43.771Z,1516423783.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:44.188Z,1516423784.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:44.571Z,1516423784.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:44.972Z,1516423784.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:45.379Z,1516423785.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:45.795Z,1516423785.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:46.179Z,1516423786.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:46.571Z,1516423786.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:46.983Z,1516423786.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:47.379Z,1516423787.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:47.771Z,1516423787.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:48.175Z,1516423788.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:48.571Z,1516423788.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:48.975Z,1516423788.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:49.374Z,1516423789.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:49.771Z,1516423789.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:50.180Z,1516423790.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:50.580Z,1516423790.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:50.978Z,1516423790.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:51.379Z,1516423791.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:51.779Z,1516423791.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:52.186Z,1516423792.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:52.571Z,1516423792.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:52.974Z,1516423792.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:53.371Z,1516423793.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:53.771Z,1516423793.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:54.179Z,1516423794.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:54.574Z,1516423794.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:54.979Z,1516423794.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:55.363Z,1516423795.363 [NAL9602](INFO): Powering up NAL9602
2018-01-20T04:49:55.381Z,1516423795.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:55.778Z,1516423795.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:56.178Z,1516423796.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:56.578Z,1516423796.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:56.978Z,1516423796.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:57.371Z,1516423797.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:57.782Z,1516423797.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:58.171Z,1516423798.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:58.571Z,1516423798.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:58.970Z,1516423798.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:59.379Z,1516423799.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:49:59.771Z,1516423799.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:00.174Z,1516423800.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:00.572Z,1516423800.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:00.980Z,1516423800.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:01.379Z,1516423801.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:01.778Z,1516423801.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:02.182Z,1516423802.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:02.586Z,1516423802.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:02.978Z,1516423802.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:03.382Z,1516423803.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:03.774Z,1516423803.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:04.171Z,1516423804.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:04.575Z,1516423804.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:04.974Z,1516423804.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:05.371Z,1516423805.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:05.776Z,1516423805.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:06.190Z,1516423806.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:06.558Z,1516423806.558 [NAL9602](INFO): NAL9602 initialized
2018-01-20T04:50:06.575Z,1516423806.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:06.980Z,1516423806.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:07.358Z,1516423807.358 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T04:50:07.358Z,1516423807.358 [NAL9602] Data Fault, FailCount= 4
2018-01-20T04:50:07.358Z,1516423807.358 [NAL9602](ERROR): Data Fault
2018-01-20T04:50:07.398Z,1516423807.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:07.477Z,1516423807.477 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T04:50:07.754Z,1516423807.754 [NAL9602](INFO): Powering down
2018-01-20T04:50:07.772Z,1516423807.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:08.174Z,1516423808.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:08.594Z,1516423808.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:08.624Z,1516423808.624 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T04:50:08.624Z,1516423808.624 [NAL9602] No Fault, FailCount= 4
2018-01-20T04:50:08.971Z,1516423808.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:09.376Z,1516423809.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:09.779Z,1516423809.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:10.179Z,1516423810.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:10.583Z,1516423810.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:10.979Z,1516423810.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:11.378Z,1516423811.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:11.784Z,1516423811.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:12.183Z,1516423812.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:12.578Z,1516423812.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:12.978Z,1516423812.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:13.378Z,1516423813.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:13.771Z,1516423813.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:14.178Z,1516423814.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:14.595Z,1516423814.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:14.971Z,1516423814.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:15.387Z,1516423815.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:15.775Z,1516423815.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:16.181Z,1516423816.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:16.577Z,1516423816.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:16.983Z,1516423816.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:17.383Z,1516423817.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:17.780Z,1516423817.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:18.183Z,1516423818.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:18.580Z,1516423818.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:18.981Z,1516423818.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:19.382Z,1516423819.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:19.784Z,1516423819.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:20.181Z,1516423820.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:20.578Z,1516423820.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:20.988Z,1516423820.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:21.371Z,1516423821.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:21.776Z,1516423821.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:22.170Z,1516423822.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:22.570Z,1516423822.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:22.975Z,1516423822.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:23.380Z,1516423823.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:23.774Z,1516423823.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:24.187Z,1516423824.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:24.584Z,1516423824.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:24.981Z,1516423824.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:25.378Z,1516423825.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:25.778Z,1516423825.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:26.178Z,1516423826.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:26.578Z,1516423826.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:26.970Z,1516423826.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:27.370Z,1516423827.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:27.778Z,1516423827.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:28.170Z,1516423828.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:28.570Z,1516423828.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:28.975Z,1516423828.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:29.374Z,1516423829.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:29.772Z,1516423829.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:30.180Z,1516423830.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:30.579Z,1516423830.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:30.980Z,1516423830.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:31.381Z,1516423831.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:31.786Z,1516423831.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:32.178Z,1516423832.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:32.574Z,1516423832.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:32.970Z,1516423832.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:33.386Z,1516423833.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:33.775Z,1516423833.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:34.171Z,1516423834.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:34.570Z,1516423834.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:34.975Z,1516423834.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:35.370Z,1516423835.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:35.770Z,1516423835.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:36.175Z,1516423836.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:36.571Z,1516423836.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:36.970Z,1516423836.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:37.375Z,1516423837.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:37.763Z,1516423837.763 [NAL9602](INFO): Powering up NAL9602
2018-01-20T04:50:37.781Z,1516423837.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:38.175Z,1516423838.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:38.587Z,1516423838.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:41.845Z,1516423841.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:41.968Z,1516423841.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:42.339Z,1516423842.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:42.741Z,1516423842.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:43.132Z,1516423843.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:43.531Z,1516423843.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:43.935Z,1516423843.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:44.338Z,1516423844.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:44.739Z,1516423844.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:45.138Z,1516423845.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:45.532Z,1516423845.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:45.932Z,1516423845.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:46.341Z,1516423846.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:46.734Z,1516423846.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:47.142Z,1516423847.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:47.538Z,1516423847.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:47.557Z,1516423847.557 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:50:47.557Z,1516423847.557 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 58
2018-01-20T04:50:47.557Z,1516423847.557 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:50:47.569Z,1516423847.569 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:50:47.937Z,1516423847.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:47.971Z,1516423847.971 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:50:47.971Z,1516423847.971 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 58
2018-01-20T04:50:48.342Z,1516423848.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:48.368Z,1516423848.368 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:50:48.368Z,1516423848.368 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:50:48.368Z,1516423848.368 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:50:48.710Z,1516423848.710 [NAL9602](INFO): NAL9602 initialized
2018-01-20T04:50:48.727Z,1516423848.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:49.132Z,1516423849.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:49.544Z,1516423849.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:49.947Z,1516423849.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:50.346Z,1516423850.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:50.727Z,1516423850.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:51.129Z,1516423851.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:51.136Z,1516423851.136 [PNI_TCM](ERROR): CRC does not match. Expected:0x24296 got:0x3279
2018-01-20T04:50:51.530Z,1516423851.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:51.942Z,1516423851.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:52.352Z,1516423852.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:52.751Z,1516423852.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:53.133Z,1516423853.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:53.535Z,1516423853.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:53.932Z,1516423853.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:54.337Z,1516423854.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:54.344Z,1516423854.344 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2018-01-20T04:50:54.734Z,1516423854.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:55.136Z,1516423855.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:55.535Z,1516423855.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:55.928Z,1516423855.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:55.937Z,1516423855.937 [PNI_TCM](ERROR): CRC does not match. Expected:0x57537 got:0x49305
2018-01-20T04:50:56.334Z,1516423856.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:56.340Z,1516423856.340 [PNI_TCM](ERROR): CRC does not match. Expected:0x30920 got:0x20509
2018-01-20T04:50:56.753Z,1516423856.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:57.148Z,1516423857.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:57.548Z,1516423857.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:57.950Z,1516423857.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:58.331Z,1516423858.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:58.730Z,1516423858.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:59.141Z,1516423859.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:59.533Z,1516423859.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:50:59.934Z,1516423859.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:00.333Z,1516423860.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:00.728Z,1516423860.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:01.132Z,1516423861.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:01.541Z,1516423861.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:01.950Z,1516423861.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:02.340Z,1516423862.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:02.354Z,1516423862.354 [PNI_TCM](ERROR): CRC does not match. Expected:0x33084 got:0x46976
2018-01-20T04:51:02.746Z,1516423862.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:03.144Z,1516423863.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:03.523Z,1516423863.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:03.940Z,1516423863.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:04.322Z,1516423864.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:04.723Z,1516423864.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:05.140Z,1516423865.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:05.539Z,1516423865.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:05.923Z,1516423865.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:06.328Z,1516423866.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:06.727Z,1516423866.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:07.151Z,1516423867.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:07.548Z,1516423867.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:07.939Z,1516423867.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:08.349Z,1516423868.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:08.731Z,1516423868.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:09.122Z,1516423869.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:09.523Z,1516423869.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:09.927Z,1516423869.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:10.333Z,1516423870.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:10.733Z,1516423870.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:11.134Z,1516423871.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:11.538Z,1516423871.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:11.936Z,1516423871.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:12.347Z,1516423872.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:12.748Z,1516423872.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:13.145Z,1516423873.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:13.543Z,1516423873.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:13.923Z,1516423873.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:14.323Z,1516423874.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:14.731Z,1516423874.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:15.122Z,1516423875.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:15.523Z,1516423875.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:15.932Z,1516423875.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:16.329Z,1516423876.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:16.731Z,1516423876.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:17.131Z,1516423877.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:17.552Z,1516423877.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:17.942Z,1516423877.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:18.341Z,1516423878.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:18.741Z,1516423878.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:19.123Z,1516423879.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:19.527Z,1516423879.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:19.923Z,1516423879.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:20.323Z,1516423880.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:20.723Z,1516423880.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:21.123Z,1516423881.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:21.527Z,1516423881.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:21.927Z,1516423881.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:22.323Z,1516423882.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:22.742Z,1516423882.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:23.141Z,1516423883.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:23.542Z,1516423883.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:23.946Z,1516423883.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:24.327Z,1516423884.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:24.723Z,1516423884.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:25.123Z,1516423885.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:25.523Z,1516423885.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:25.930Z,1516423885.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:26.331Z,1516423886.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:26.727Z,1516423886.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:27.131Z,1516423887.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:27.523Z,1516423887.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:27.933Z,1516423887.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:28.350Z,1516423888.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:28.734Z,1516423888.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:29.147Z,1516423889.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:29.523Z,1516423889.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:29.931Z,1516423889.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:30.332Z,1516423890.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:30.735Z,1516423890.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:31.129Z,1516423891.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:31.534Z,1516423891.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:31.935Z,1516423891.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:32.332Z,1516423892.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:32.735Z,1516423892.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:33.142Z,1516423893.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:33.546Z,1516423893.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:33.946Z,1516423893.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:34.346Z,1516423894.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:34.735Z,1516423894.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:35.131Z,1516423895.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:35.538Z,1516423895.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:35.931Z,1516423895.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:36.335Z,1516423896.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:36.732Z,1516423896.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:37.123Z,1516423897.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:37.523Z,1516423897.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:37.939Z,1516423897.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:38.343Z,1516423898.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:38.745Z,1516423898.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:42.016Z,1516423902.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:42.158Z,1516423902.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:42.501Z,1516423902.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:42.908Z,1516423902.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:43.306Z,1516423903.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:43.712Z,1516423903.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:44.117Z,1516423904.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:44.506Z,1516423904.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:44.895Z,1516423904.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:45.291Z,1516423905.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:45.690Z,1516423905.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:46.099Z,1516423906.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:46.499Z,1516423906.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:46.892Z,1516423906.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:47.298Z,1516423907.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:47.703Z,1516423907.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:48.096Z,1516423908.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:48.510Z,1516423908.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:48.902Z,1516423908.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:49.318Z,1516423909.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:49.710Z,1516423909.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:50.099Z,1516423910.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:50.501Z,1516423910.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:50.901Z,1516423910.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:51.303Z,1516423911.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:51.697Z,1516423911.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:52.099Z,1516423912.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:52.504Z,1516423912.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:52.896Z,1516423912.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:53.308Z,1516423913.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:53.710Z,1516423913.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:54.109Z,1516423914.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:54.514Z,1516423914.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:54.914Z,1516423914.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:55.306Z,1516423915.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:55.698Z,1516423915.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:56.098Z,1516423916.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:56.490Z,1516423916.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:56.915Z,1516423916.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:57.295Z,1516423917.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:57.691Z,1516423917.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:58.095Z,1516423918.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:58.495Z,1516423918.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:58.905Z,1516423918.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:59.306Z,1516423919.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:51:59.706Z,1516423919.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:00.110Z,1516423920.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:00.495Z,1516423920.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:00.903Z,1516423920.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:01.300Z,1516423921.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:01.702Z,1516423921.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:02.103Z,1516423922.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:02.504Z,1516423922.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:02.901Z,1516423922.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:03.301Z,1516423923.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:03.707Z,1516423923.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:04.114Z,1516423924.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:04.518Z,1516423924.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:04.908Z,1516423924.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:05.317Z,1516423925.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:05.695Z,1516423925.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:06.099Z,1516423926.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:06.495Z,1516423926.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:06.898Z,1516423926.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:07.299Z,1516423927.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:07.702Z,1516423927.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:08.096Z,1516423928.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:08.500Z,1516423928.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:08.902Z,1516423928.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:09.314Z,1516423929.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:09.714Z,1516423929.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:10.118Z,1516423930.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:10.512Z,1516423930.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:10.903Z,1516423930.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:11.302Z,1516423931.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:11.708Z,1516423931.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:12.103Z,1516423932.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:12.513Z,1516423932.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:12.903Z,1516423932.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:13.298Z,1516423933.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:13.695Z,1516423933.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:14.108Z,1516423934.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:14.505Z,1516423934.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:14.918Z,1516423934.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:15.318Z,1516423935.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:15.712Z,1516423935.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:16.095Z,1516423936.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:16.491Z,1516423936.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:16.899Z,1516423936.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:17.311Z,1516423937.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:17.695Z,1516423937.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:18.098Z,1516423938.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:18.495Z,1516423938.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:18.896Z,1516423938.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:19.299Z,1516423939.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:19.714Z,1516423939.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:20.111Z,1516423940.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:20.519Z,1516423940.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:20.921Z,1516423940.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:21.299Z,1516423941.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:21.699Z,1516423941.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:22.099Z,1516423942.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:22.495Z,1516423942.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:22.899Z,1516423942.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:23.295Z,1516423943.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:23.693Z,1516423943.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:24.095Z,1516423944.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:24.495Z,1516423944.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:24.917Z,1516423944.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:25.303Z,1516423945.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:25.722Z,1516423945.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:26.115Z,1516423946.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:26.499Z,1516423946.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:26.897Z,1516423946.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:27.299Z,1516423947.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:27.699Z,1516423947.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:28.099Z,1516423948.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:28.501Z,1516423948.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:28.900Z,1516423948.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:29.302Z,1516423949.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:29.700Z,1516423949.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:30.114Z,1516423950.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:30.518Z,1516423950.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:30.909Z,1516423950.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:31.314Z,1516423951.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:31.713Z,1516423951.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:32.092Z,1516423952.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:32.507Z,1516423952.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:32.907Z,1516423952.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:33.292Z,1516423953.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:33.710Z,1516423953.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:34.098Z,1516423954.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:34.498Z,1516423954.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:34.911Z,1516423954.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:35.310Z,1516423955.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:35.722Z,1516423955.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:36.122Z,1516423956.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:36.516Z,1516423956.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:36.893Z,1516423956.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:37.334Z,1516423957.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:37.703Z,1516423957.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:38.095Z,1516423958.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:38.502Z,1516423958.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:38.508Z,1516423958.508 [PNI_TCM](ERROR): CRC does not match. Expected:0x35137 got:0x4891
2018-01-20T04:52:38.898Z,1516423958.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:42.187Z,1516423962.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:42.338Z,1516423962.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:42.726Z,1516423962.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:43.127Z,1516423963.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:43.511Z,1516423963.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:43.907Z,1516423963.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:44.311Z,1516423964.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:44.711Z,1516423964.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:45.107Z,1516423965.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:45.507Z,1516423965.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:45.911Z,1516423965.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:46.307Z,1516423966.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:46.703Z,1516423966.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:47.131Z,1516423967.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:47.518Z,1516423967.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:47.931Z,1516423967.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:48.330Z,1516423968.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:48.707Z,1516423968.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:49.107Z,1516423969.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:49.511Z,1516423969.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:49.914Z,1516423969.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:50.315Z,1516423970.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:50.707Z,1516423970.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:51.115Z,1516423971.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:51.512Z,1516423971.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:51.916Z,1516423971.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:52.318Z,1516423972.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:52.722Z,1516423972.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:53.125Z,1516423973.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:53.524Z,1516423973.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:53.903Z,1516423973.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:54.310Z,1516423974.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:54.710Z,1516423974.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:55.115Z,1516423975.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:55.510Z,1516423975.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:55.910Z,1516423975.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:56.319Z,1516423976.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:56.719Z,1516423976.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:57.107Z,1516423977.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:57.531Z,1516423977.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:57.924Z,1516423977.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:58.325Z,1516423978.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:58.724Z,1516423978.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:59.111Z,1516423979.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:59.511Z,1516423979.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:52:59.903Z,1516423979.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:00.311Z,1516423980.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:00.707Z,1516423980.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:01.103Z,1516423981.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:01.511Z,1516423981.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:01.907Z,1516423981.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:02.307Z,1516423982.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:02.730Z,1516423982.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:03.126Z,1516423983.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:03.525Z,1516423983.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:03.930Z,1516423983.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:04.307Z,1516423984.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:04.703Z,1516423984.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:05.111Z,1516423985.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:05.507Z,1516423985.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:05.911Z,1516423985.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:06.305Z,1516423986.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:06.710Z,1516423986.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:07.111Z,1516423987.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:07.515Z,1516423987.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:07.934Z,1516423987.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:08.326Z,1516423988.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:08.730Z,1516423988.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:09.130Z,1516423989.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:09.521Z,1516423989.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:09.905Z,1516423989.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:10.312Z,1516423990.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:10.709Z,1516423990.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:11.103Z,1516423991.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:11.510Z,1516423991.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:11.903Z,1516423991.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:12.303Z,1516423992.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:12.707Z,1516423992.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:13.114Z,1516423993.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:13.514Z,1516423993.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:13.926Z,1516423993.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:14.331Z,1516423994.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:14.705Z,1516423994.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:15.111Z,1516423995.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:15.515Z,1516423995.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:15.901Z,1516423995.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:16.316Z,1516423996.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:16.715Z,1516423996.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:17.113Z,1516423997.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:17.514Z,1516423997.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:17.915Z,1516423997.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:18.321Z,1516423998.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:18.725Z,1516423998.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:19.123Z,1516423999.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:19.518Z,1516423999.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:19.910Z,1516423999.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:20.303Z,1516424000.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:20.704Z,1516424000.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:21.110Z,1516424001.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:21.519Z,1516424001.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:21.905Z,1516424001.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:22.307Z,1516424002.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:22.703Z,1516424002.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:23.104Z,1516424003.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:23.524Z,1516424003.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:23.923Z,1516424003.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:24.322Z,1516424004.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:24.725Z,1516424004.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:25.103Z,1516424005.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:25.511Z,1516424005.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:25.907Z,1516424005.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:26.303Z,1516424006.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:26.704Z,1516424006.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:27.111Z,1516424007.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:27.503Z,1516424007.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:27.904Z,1516424007.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:28.307Z,1516424008.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:28.718Z,1516424008.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:29.114Z,1516424009.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:29.517Z,1516424009.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:29.918Z,1516424009.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:30.304Z,1516424010.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:30.711Z,1516424010.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:31.110Z,1516424011.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:31.515Z,1516424011.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:31.914Z,1516424011.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:32.314Z,1516424012.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:32.708Z,1516424012.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:33.118Z,1516424013.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:33.512Z,1516424013.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:33.918Z,1516424013.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:34.326Z,1516424014.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:34.722Z,1516424014.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:35.122Z,1516424015.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:35.510Z,1516424015.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:35.920Z,1516424015.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:36.319Z,1516424016.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:36.727Z,1516424016.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:37.103Z,1516424017.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:37.503Z,1516424017.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:37.907Z,1516424017.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:38.307Z,1516424018.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:38.348Z,1516424018.348 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T04:48:38.3Z
2018-01-20T04:53:38.348Z,1516424018.348 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T04:53:38.348Z,1516424018.348 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T04:53:38.703Z,1516424018.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:39.186Z,1516424019.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:42.386Z,1516424022.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:42.481Z,1516424022.481 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180119T210901/Courier0196.lzma
2018-01-20T04:53:42.515Z,1516424022.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:42.894Z,1516424022.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:43.255Z,1516424023.255 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0196.lzma.bak
2018-01-20T04:53:43.255Z,1516424023.255 [DataOverHttps](INFO): SBD MOMSN=7726509
2018-01-20T04:53:43.296Z,1516424023.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:43.795Z,1516424023.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:44.080Z,1516424024.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:50.297Z,1516424030.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:50.393Z,1516424030.393 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:53:50.393Z,1516424030.393 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 59
2018-01-20T04:53:50.394Z,1516424030.394 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:53:50.428Z,1516424030.428 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:53:50.541Z,1516424030.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:50.639Z,1516424030.639 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:53:50.640Z,1516424030.640 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 59
2018-01-20T04:53:50.881Z,1516424030.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:50.930Z,1516424030.930 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:53:50.931Z,1516424030.931 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:53:50.931Z,1516424030.931 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:53:51.304Z,1516424031.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:51.665Z,1516424031.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:52.073Z,1516424032.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:58.375Z,1516424038.375 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T04:53:58.404Z,1516424038.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:58.550Z,1516424038.550 [DataOverHttps](INFO): Sending 254 bytes from file Logs/20180119T210901/Express0197.lzma
2018-01-20T04:53:58.583Z,1516424038.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:58.936Z,1516424038.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:59.307Z,1516424039.307 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0197.lzma.bak
2018-01-20T04:53:59.308Z,1516424039.308 [DataOverHttps](INFO): SBD MOMSN=7726513
2018-01-20T04:53:59.351Z,1516424039.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:59.844Z,1516424039.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:53:59.891Z,1516424039.891 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T04:53:59.891Z,1516424039.891 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T04:53:59.891Z,1516424039.891 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T04:54:00.139Z,1516424040.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:03.420Z,1516424043.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:03.549Z,1516424043.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:03.911Z,1516424043.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:04.311Z,1516424044.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:04.706Z,1516424044.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:05.108Z,1516424045.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:05.510Z,1516424045.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:05.912Z,1516424045.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:06.310Z,1516424046.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:06.708Z,1516424046.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:07.112Z,1516424047.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:07.516Z,1516424047.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:07.908Z,1516424047.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:08.311Z,1516424048.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:08.710Z,1516424048.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:09.108Z,1516424049.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:09.516Z,1516424049.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:09.919Z,1516424049.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:10.315Z,1516424050.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:10.715Z,1516424050.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:11.110Z,1516424051.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:11.515Z,1516424051.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:11.913Z,1516424051.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:12.310Z,1516424052.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:12.707Z,1516424052.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:13.111Z,1516424053.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:13.515Z,1516424053.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:13.908Z,1516424053.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:14.309Z,1516424054.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:14.709Z,1516424054.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:15.096Z,1516424055.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:15.515Z,1516424055.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:15.911Z,1516424055.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:16.315Z,1516424056.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:16.715Z,1516424056.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:17.115Z,1516424057.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:17.511Z,1516424057.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:17.906Z,1516424057.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:18.303Z,1516424058.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:18.696Z,1516424058.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:19.103Z,1516424059.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:19.503Z,1516424059.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:19.896Z,1516424059.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:20.307Z,1516424060.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:20.703Z,1516424060.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:21.100Z,1516424061.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:21.503Z,1516424061.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:21.903Z,1516424061.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:22.303Z,1516424062.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:22.706Z,1516424062.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:23.118Z,1516424063.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:23.513Z,1516424063.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:23.910Z,1516424063.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:24.311Z,1516424064.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:24.706Z,1516424064.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:25.109Z,1516424065.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:25.506Z,1516424065.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:25.912Z,1516424065.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:26.318Z,1516424066.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:26.717Z,1516424066.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:27.117Z,1516424067.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:27.510Z,1516424067.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:27.910Z,1516424067.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:28.303Z,1516424068.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:28.683Z,1516424068.683 [NAL9602](INFO): Powering down
2018-01-20T04:54:28.712Z,1516424068.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:29.104Z,1516424069.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:29.499Z,1516424069.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:29.900Z,1516424069.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:30.307Z,1516424070.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:30.703Z,1516424070.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:31.100Z,1516424071.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:31.507Z,1516424071.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:31.903Z,1516424071.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:32.307Z,1516424072.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:32.711Z,1516424072.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:33.106Z,1516424073.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:33.507Z,1516424073.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:33.912Z,1516424073.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:34.311Z,1516424074.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:34.708Z,1516424074.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:35.110Z,1516424075.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:35.511Z,1516424075.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:35.908Z,1516424075.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:36.305Z,1516424076.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:36.709Z,1516424076.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:37.108Z,1516424077.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:37.505Z,1516424077.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:37.915Z,1516424077.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:38.310Z,1516424078.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:38.716Z,1516424078.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:39.110Z,1516424079.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:39.515Z,1516424079.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:39.909Z,1516424079.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:40.314Z,1516424080.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:40.700Z,1516424080.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:41.107Z,1516424081.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:41.500Z,1516424081.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:41.898Z,1516424081.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:42.311Z,1516424082.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:42.703Z,1516424082.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:43.098Z,1516424083.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:43.504Z,1516424083.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:43.911Z,1516424083.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:44.311Z,1516424084.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:44.713Z,1516424084.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:45.109Z,1516424085.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:45.510Z,1516424085.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:45.909Z,1516424085.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:46.317Z,1516424086.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:46.711Z,1516424086.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:47.116Z,1516424087.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:47.511Z,1516424087.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:47.910Z,1516424087.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:48.312Z,1516424088.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:48.709Z,1516424088.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:49.108Z,1516424089.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:49.508Z,1516424089.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:49.914Z,1516424089.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:50.309Z,1516424090.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:50.715Z,1516424090.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:51.110Z,1516424091.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:51.510Z,1516424091.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:51.913Z,1516424091.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:52.311Z,1516424092.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:52.696Z,1516424092.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:53.118Z,1516424093.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:53.125Z,1516424093.125 [PNI_TCM](ERROR): CRC does not match. Expected:0x9632 got:0x19390
2018-01-20T04:54:53.508Z,1516424093.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:53.908Z,1516424093.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:54.310Z,1516424094.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:54.710Z,1516424094.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:55.109Z,1516424095.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:55.512Z,1516424095.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:55.911Z,1516424095.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:56.311Z,1516424096.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:56.317Z,1516424096.317 [PNI_TCM](ERROR): CRC does not match. Expected:0x52033 got:0x32768
2018-01-20T04:54:56.718Z,1516424096.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:57.101Z,1516424097.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:57.498Z,1516424097.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:57.919Z,1516424097.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:57.925Z,1516424097.925 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2018-01-20T04:54:58.316Z,1516424098.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:58.702Z,1516424098.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:59.103Z,1516424099.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:59.499Z,1516424099.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:54:59.900Z,1516424099.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:00.318Z,1516424100.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:03.585Z,1516424103.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:03.697Z,1516424103.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:04.099Z,1516424104.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:04.499Z,1516424104.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:04.896Z,1516424104.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:05.297Z,1516424105.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:05.694Z,1516424105.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:06.094Z,1516424106.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:06.494Z,1516424106.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:06.901Z,1516424106.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:07.294Z,1516424107.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:07.702Z,1516424107.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:08.102Z,1516424108.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:08.502Z,1516424108.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:08.894Z,1516424108.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:09.294Z,1516424109.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:09.696Z,1516424109.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:10.093Z,1516424110.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:10.502Z,1516424110.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:10.888Z,1516424110.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:11.294Z,1516424111.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:11.687Z,1516424111.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:12.087Z,1516424112.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:12.494Z,1516424112.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:12.902Z,1516424112.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:13.302Z,1516424113.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:13.691Z,1516424113.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:14.087Z,1516424114.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:14.502Z,1516424114.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:14.891Z,1516424114.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:15.287Z,1516424115.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:15.688Z,1516424115.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:16.095Z,1516424116.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:16.487Z,1516424116.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:16.888Z,1516424116.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:17.295Z,1516424117.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:17.687Z,1516424117.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:18.095Z,1516424118.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:18.491Z,1516424118.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:18.894Z,1516424118.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:19.294Z,1516424119.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:19.699Z,1516424119.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:20.096Z,1516424120.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:20.499Z,1516424120.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:20.901Z,1516424120.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:21.287Z,1516424121.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:21.693Z,1516424121.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:22.101Z,1516424122.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:22.501Z,1516424122.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:22.897Z,1516424122.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:23.297Z,1516424123.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:23.703Z,1516424123.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:24.103Z,1516424124.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:24.505Z,1516424124.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:24.901Z,1516424124.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:25.304Z,1516424125.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:25.696Z,1516424125.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:26.088Z,1516424126.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:26.506Z,1516424126.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:26.914Z,1516424126.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:27.295Z,1516424127.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:27.688Z,1516424127.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:28.086Z,1516424128.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:28.486Z,1516424128.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:28.887Z,1516424128.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:29.290Z,1516424129.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:29.695Z,1516424129.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:30.095Z,1516424130.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:30.493Z,1516424130.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:30.894Z,1516424130.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:31.294Z,1516424131.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:31.698Z,1516424131.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:32.094Z,1516424132.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:32.494Z,1516424132.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:32.894Z,1516424132.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:33.294Z,1516424133.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:33.694Z,1516424133.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:34.098Z,1516424134.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:34.494Z,1516424134.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:34.894Z,1516424134.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:35.294Z,1516424135.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:35.697Z,1516424135.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:36.094Z,1516424136.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:36.494Z,1516424136.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:36.899Z,1516424136.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:37.294Z,1516424137.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:37.694Z,1516424137.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:38.094Z,1516424138.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:38.494Z,1516424138.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:38.898Z,1516424138.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:39.294Z,1516424139.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:39.691Z,1516424139.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:40.094Z,1516424140.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:40.494Z,1516424140.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:40.894Z,1516424140.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:41.302Z,1516424141.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:41.694Z,1516424141.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:42.096Z,1516424142.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:42.498Z,1516424142.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:42.894Z,1516424142.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:43.294Z,1516424143.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:43.698Z,1516424143.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:44.101Z,1516424144.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:44.494Z,1516424144.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:44.898Z,1516424144.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:45.294Z,1516424145.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:45.694Z,1516424145.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:46.098Z,1516424146.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:46.499Z,1516424146.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:46.896Z,1516424146.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:47.298Z,1516424147.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:47.699Z,1516424147.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:48.094Z,1516424148.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:48.494Z,1516424148.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:48.897Z,1516424148.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:49.287Z,1516424149.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:49.686Z,1516424149.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:50.103Z,1516424150.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:50.487Z,1516424150.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:50.890Z,1516424150.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:51.291Z,1516424151.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:51.684Z,1516424151.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:52.086Z,1516424152.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:52.491Z,1516424152.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:52.887Z,1516424152.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:53.290Z,1516424153.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:53.695Z,1516424153.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:54.087Z,1516424154.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:54.490Z,1516424154.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:54.895Z,1516424154.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:55.296Z,1516424155.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:55.695Z,1516424155.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:56.103Z,1516424156.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:56.494Z,1516424156.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:56.897Z,1516424156.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:57.294Z,1516424157.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:57.694Z,1516424157.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:58.098Z,1516424158.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:58.497Z,1516424158.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:58.894Z,1516424158.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:59.295Z,1516424159.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:55:59.703Z,1516424159.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:00.094Z,1516424160.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:00.499Z,1516424160.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:03.799Z,1516424163.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:03.919Z,1516424163.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:04.271Z,1516424164.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:04.682Z,1516424164.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:05.068Z,1516424165.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:05.480Z,1516424165.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:05.874Z,1516424165.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:06.264Z,1516424166.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:06.664Z,1516424166.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:07.074Z,1516424167.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:07.480Z,1516424167.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:07.876Z,1516424167.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:08.277Z,1516424168.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:08.674Z,1516424168.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:09.064Z,1516424169.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:09.480Z,1516424169.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:09.873Z,1516424169.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:10.276Z,1516424170.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:10.681Z,1516424170.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:11.064Z,1516424171.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:11.464Z,1516424171.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:11.882Z,1516424171.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:12.264Z,1516424172.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:12.676Z,1516424172.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:13.080Z,1516424173.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:13.464Z,1516424173.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:13.880Z,1516424173.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:14.282Z,1516424174.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:14.664Z,1516424174.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:15.080Z,1516424175.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:15.481Z,1516424175.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:15.864Z,1516424175.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:16.264Z,1516424176.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:16.683Z,1516424176.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:17.064Z,1516424177.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:17.468Z,1516424177.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:17.872Z,1516424177.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:18.264Z,1516424178.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:18.664Z,1516424178.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:19.083Z,1516424179.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:19.464Z,1516424179.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:19.868Z,1516424179.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:20.272Z,1516424180.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:20.668Z,1516424180.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:21.069Z,1516424181.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:21.473Z,1516424181.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:21.870Z,1516424181.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:22.272Z,1516424182.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:22.668Z,1516424182.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:23.070Z,1516424183.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:23.477Z,1516424183.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:23.870Z,1516424183.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:24.272Z,1516424184.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:24.674Z,1516424184.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:25.075Z,1516424185.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:25.472Z,1516424185.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:25.876Z,1516424185.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:26.276Z,1516424186.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:26.670Z,1516424186.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:27.080Z,1516424187.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:27.481Z,1516424187.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:27.864Z,1516424187.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:28.264Z,1516424188.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:28.664Z,1516424188.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:29.064Z,1516424189.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:29.480Z,1516424189.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:29.876Z,1516424189.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:30.264Z,1516424190.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:30.664Z,1516424190.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:31.064Z,1516424191.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:31.480Z,1516424191.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:31.877Z,1516424191.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:32.284Z,1516424192.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:32.664Z,1516424192.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:33.064Z,1516424193.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:33.464Z,1516424193.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:33.864Z,1516424193.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:34.276Z,1516424194.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:34.664Z,1516424194.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:35.064Z,1516424195.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:35.480Z,1516424195.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:35.866Z,1516424195.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:36.264Z,1516424196.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:36.668Z,1516424196.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:37.064Z,1516424197.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:37.464Z,1516424197.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:37.880Z,1516424197.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:38.266Z,1516424198.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:38.664Z,1516424198.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:39.068Z,1516424199.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:39.464Z,1516424199.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:39.864Z,1516424199.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:40.264Z,1516424200.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:40.662Z,1516424200.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:41.064Z,1516424201.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:41.468Z,1516424201.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:41.866Z,1516424201.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:42.284Z,1516424202.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:42.668Z,1516424202.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:43.066Z,1516424203.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:43.481Z,1516424203.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:43.868Z,1516424203.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:44.266Z,1516424204.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:44.668Z,1516424204.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:45.072Z,1516424205.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:45.466Z,1516424205.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:45.872Z,1516424205.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:46.278Z,1516424206.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:46.664Z,1516424206.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:47.071Z,1516424207.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:47.468Z,1516424207.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:47.868Z,1516424207.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:48.273Z,1516424208.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:48.674Z,1516424208.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:49.072Z,1516424209.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:49.473Z,1516424209.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:49.880Z,1516424209.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:50.274Z,1516424210.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:50.676Z,1516424210.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:51.074Z,1516424211.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:51.106Z,1516424211.106 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:56:51.106Z,1516424211.106 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 60
2018-01-20T04:56:51.106Z,1516424211.106 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:56:51.141Z,1516424211.141 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:56:51.464Z,1516424211.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:51.513Z,1516424211.513 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:56:51.513Z,1516424211.513 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 60
2018-01-20T04:56:51.877Z,1516424211.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:51.896Z,1516424211.896 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:56:51.896Z,1516424211.896 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:56:51.897Z,1516424211.897 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:56:52.283Z,1516424212.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:52.664Z,1516424212.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:53.077Z,1516424213.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:53.472Z,1516424213.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:53.864Z,1516424213.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:54.271Z,1516424214.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:54.668Z,1516424214.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:55.076Z,1516424215.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:55.474Z,1516424215.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:55.880Z,1516424215.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:56.274Z,1516424216.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:56.679Z,1516424216.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:57.081Z,1516424217.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:57.481Z,1516424217.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:57.883Z,1516424217.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:58.278Z,1516424218.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:58.679Z,1516424218.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:59.079Z,1516424219.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:59.484Z,1516424219.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:56:59.883Z,1516424219.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:00.278Z,1516424220.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:00.678Z,1516424220.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:03.946Z,1516424223.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:04.064Z,1516424224.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:04.450Z,1516424224.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:04.843Z,1516424224.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:05.251Z,1516424225.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:05.647Z,1516424225.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:06.047Z,1516424226.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:06.449Z,1516424226.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:06.849Z,1516424226.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:07.246Z,1516424227.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:07.647Z,1516424227.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:08.049Z,1516424228.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:08.454Z,1516424228.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:08.855Z,1516424228.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:09.250Z,1516424229.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:09.636Z,1516424229.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:10.050Z,1516424230.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:10.449Z,1516424230.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:10.846Z,1516424230.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:11.249Z,1516424231.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:11.649Z,1516424231.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:12.047Z,1516424232.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:12.446Z,1516424232.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:12.849Z,1516424232.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:13.247Z,1516424233.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:13.656Z,1516424233.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:14.046Z,1516424234.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:14.455Z,1516424234.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:14.850Z,1516424234.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:15.247Z,1516424235.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:15.639Z,1516424235.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:16.057Z,1516424236.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:16.455Z,1516424236.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:16.851Z,1516424236.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:17.241Z,1516424237.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:17.654Z,1516424237.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:18.039Z,1516424238.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:18.440Z,1516424238.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:18.856Z,1516424238.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:19.239Z,1516424239.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:19.636Z,1516424239.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:20.043Z,1516424240.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:20.439Z,1516424240.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:20.843Z,1516424240.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:21.243Z,1516424241.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:21.639Z,1516424241.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:22.039Z,1516424242.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:22.447Z,1516424242.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:22.847Z,1516424242.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:23.244Z,1516424243.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:23.652Z,1516424243.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:24.046Z,1516424244.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:24.446Z,1516424244.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:24.845Z,1516424244.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:25.255Z,1516424245.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:25.639Z,1516424245.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:26.062Z,1516424246.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:26.455Z,1516424246.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:26.836Z,1516424246.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:27.243Z,1516424247.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:27.639Z,1516424247.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:28.047Z,1516424248.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:28.443Z,1516424248.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:28.843Z,1516424248.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:29.240Z,1516424249.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:29.642Z,1516424249.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:30.047Z,1516424250.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:30.447Z,1516424250.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:30.851Z,1516424250.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:31.243Z,1516424251.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:31.643Z,1516424251.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:32.059Z,1516424252.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:32.452Z,1516424252.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:32.846Z,1516424252.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:33.249Z,1516424253.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:33.654Z,1516424253.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:34.047Z,1516424254.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:34.446Z,1516424254.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:34.846Z,1516424254.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:35.248Z,1516424255.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:35.660Z,1516424255.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:36.046Z,1516424256.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:36.451Z,1516424256.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:36.846Z,1516424256.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:37.246Z,1516424257.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:37.639Z,1516424257.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:38.046Z,1516424258.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:38.439Z,1516424258.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:38.836Z,1516424258.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:39.255Z,1516424259.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:39.639Z,1516424259.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:40.039Z,1516424260.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:40.443Z,1516424260.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:40.839Z,1516424260.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:41.236Z,1516424261.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:41.647Z,1516424261.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:42.039Z,1516424262.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:42.446Z,1516424262.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:42.843Z,1516424262.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:43.239Z,1516424263.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:43.639Z,1516424263.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:44.043Z,1516424264.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:44.446Z,1516424264.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:44.836Z,1516424264.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:45.243Z,1516424265.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:45.647Z,1516424265.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:46.047Z,1516424266.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:46.448Z,1516424266.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:46.846Z,1516424266.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:47.246Z,1516424267.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:47.649Z,1516424267.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:48.046Z,1516424268.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:48.446Z,1516424268.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:48.849Z,1516424268.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:49.246Z,1516424269.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:49.646Z,1516424269.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:50.049Z,1516424270.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:50.446Z,1516424270.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:50.847Z,1516424270.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:51.247Z,1516424271.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:51.654Z,1516424271.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:52.054Z,1516424272.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:52.452Z,1516424272.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:52.847Z,1516424272.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:53.247Z,1516424273.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:53.645Z,1516424273.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:54.051Z,1516424274.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:54.452Z,1516424274.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:54.857Z,1516424274.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:55.249Z,1516424275.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:55.650Z,1516424275.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:56.047Z,1516424276.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:56.454Z,1516424276.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:56.837Z,1516424276.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:57.239Z,1516424277.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:57.639Z,1516424277.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:58.039Z,1516424278.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:58.443Z,1516424278.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:58.839Z,1516424278.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:59.239Z,1516424279.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:57:59.646Z,1516424279.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:00.039Z,1516424280.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:00.447Z,1516424280.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:00.843Z,1516424280.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:04.118Z,1516424284.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:04.231Z,1516424284.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:04.595Z,1516424284.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:04.995Z,1516424284.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:05.394Z,1516424285.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:05.795Z,1516424285.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:06.191Z,1516424286.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:06.590Z,1516424286.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:06.996Z,1516424286.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:07.387Z,1516424287.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:07.786Z,1516424287.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:08.197Z,1516424288.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:08.587Z,1516424288.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:08.980Z,1516424288.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:09.387Z,1516424289.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:09.780Z,1516424289.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:10.181Z,1516424290.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:10.588Z,1516424290.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:10.979Z,1516424290.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:11.387Z,1516424291.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:11.787Z,1516424291.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:12.179Z,1516424292.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:12.584Z,1516424292.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:12.995Z,1516424292.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:13.383Z,1516424293.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:13.787Z,1516424293.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:14.186Z,1516424294.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:14.586Z,1516424294.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:14.988Z,1516424294.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:15.390Z,1516424295.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:15.779Z,1516424295.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:16.179Z,1516424296.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:16.582Z,1516424296.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:16.979Z,1516424296.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:17.379Z,1516424297.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:17.782Z,1516424297.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:18.186Z,1516424298.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:18.579Z,1516424298.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:18.978Z,1516424298.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:19.379Z,1516424299.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:19.779Z,1516424299.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:20.190Z,1516424300.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:20.586Z,1516424300.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:20.986Z,1516424300.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:21.390Z,1516424301.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:21.786Z,1516424301.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:22.179Z,1516424302.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:22.590Z,1516424302.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:22.979Z,1516424302.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:23.394Z,1516424303.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:23.778Z,1516424303.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:24.186Z,1516424304.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:24.580Z,1516424304.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:24.982Z,1516424304.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:25.386Z,1516424305.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:25.776Z,1516424305.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:26.182Z,1516424306.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:26.586Z,1516424306.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:26.980Z,1516424306.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:27.382Z,1516424307.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:27.786Z,1516424307.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:28.183Z,1516424308.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:28.586Z,1516424308.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:28.986Z,1516424308.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:29.386Z,1516424309.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:29.790Z,1516424309.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:30.190Z,1516424310.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:30.579Z,1516424310.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:30.978Z,1516424310.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:31.383Z,1516424311.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:31.779Z,1516424311.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:32.194Z,1516424312.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:32.583Z,1516424312.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:32.979Z,1516424312.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:33.378Z,1516424313.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:33.787Z,1516424313.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:34.180Z,1516424314.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:34.582Z,1516424314.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:34.987Z,1516424314.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:35.388Z,1516424315.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:35.786Z,1516424315.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:36.189Z,1516424316.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:36.576Z,1516424316.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:36.990Z,1516424316.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:37.386Z,1516424317.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:37.779Z,1516424317.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:38.178Z,1516424318.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:38.583Z,1516424318.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:38.983Z,1516424318.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:39.382Z,1516424319.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:39.783Z,1516424319.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:40.179Z,1516424320.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:40.578Z,1516424320.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:40.983Z,1516424320.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:41.383Z,1516424321.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:41.798Z,1516424321.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:42.188Z,1516424322.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:42.587Z,1516424322.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:42.989Z,1516424322.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:43.389Z,1516424323.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:43.795Z,1516424323.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:44.186Z,1516424324.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:44.586Z,1516424324.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:44.983Z,1516424324.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:45.383Z,1516424325.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:45.784Z,1516424325.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:46.187Z,1516424326.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:46.591Z,1516424326.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:46.990Z,1516424326.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:47.392Z,1516424327.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:47.793Z,1516424327.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:48.184Z,1516424328.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:48.579Z,1516424328.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:48.987Z,1516424328.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:49.379Z,1516424329.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:49.779Z,1516424329.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:50.178Z,1516424330.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:50.580Z,1516424330.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:50.991Z,1516424330.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:51.388Z,1516424331.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:51.786Z,1516424331.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:52.187Z,1516424332.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:52.590Z,1516424332.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:52.980Z,1516424332.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:53.379Z,1516424333.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:53.783Z,1516424333.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:54.179Z,1516424334.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:54.579Z,1516424334.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:54.978Z,1516424334.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:55.379Z,1516424335.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:55.779Z,1516424335.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:56.182Z,1516424336.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:56.579Z,1516424336.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:56.979Z,1516424336.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:57.382Z,1516424337.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:57.780Z,1516424337.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:58.183Z,1516424338.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:58.589Z,1516424338.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:58.986Z,1516424338.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:59.386Z,1516424339.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:58:59.790Z,1516424339.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:00.186Z,1516424340.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:00.206Z,1516424340.206 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T04:59:00.206Z,1516424340.206 [Default:CheckIn:C.Wait] Stopped
2018-01-20T04:59:00.206Z,1516424340.206 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T04:59:00.207Z,1516424340.207 [Default:CheckIn:D] Running Loop=1
2018-01-20T04:59:00.584Z,1516424340.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:00.681Z,1516424340.681 [Default:CheckIn:D] Stopped
2018-01-20T04:59:00.681Z,1516424340.681 [Default:CheckIn:E] Running Loop=1
2018-01-20T04:59:00.985Z,1516424340.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:01.043Z,1516424341.043 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 175.400846 min 
2018-01-20T04:59:01.043Z,1516424341.043 [Default:CheckIn:E] Stopped
2018-01-20T04:59:01.043Z,1516424341.043 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T04:59:01.043Z,1516424341.043 [Default:CheckIn] Stopped
2018-01-20T04:59:01.044Z,1516424341.044 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T04:59:01.044Z,1516424341.044 [Default:CheckIn](INFO): Running loop #18
2018-01-20T04:59:01.044Z,1516424341.044 [Default:CheckIn] Running Loop=18
2018-01-20T04:59:01.044Z,1516424341.044 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T04:59:01.044Z,1516424341.044 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T04:59:07.001Z,1516424347.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:07.218Z,1516424347.218 [NAL9602](INFO): Powering up
2018-01-20T04:59:07.249Z,1516424347.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:07.593Z,1516424347.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:07.993Z,1516424347.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:08.371Z,1516424348.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:08.764Z,1516424348.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:09.160Z,1516424349.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:09.579Z,1516424349.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:09.969Z,1516424349.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:10.360Z,1516424350.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:10.764Z,1516424350.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:11.166Z,1516424351.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:11.578Z,1516424351.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:11.968Z,1516424351.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:12.378Z,1516424352.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:12.771Z,1516424352.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:13.159Z,1516424353.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:13.563Z,1516424353.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:13.966Z,1516424353.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:14.358Z,1516424354.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:14.763Z,1516424354.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:15.167Z,1516424355.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:15.567Z,1516424355.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:15.965Z,1516424355.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:16.355Z,1516424356.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:16.755Z,1516424356.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:17.166Z,1516424357.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:17.567Z,1516424357.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:17.974Z,1516424357.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:18.342Z,1516424358.342 [NAL9602](INFO): NAL9602 initialized
2018-01-20T04:59:18.362Z,1516424358.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:18.767Z,1516424358.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:19.179Z,1516424359.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:19.570Z,1516424359.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:19.978Z,1516424359.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:20.356Z,1516424360.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:20.770Z,1516424360.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:21.155Z,1516424361.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:21.557Z,1516424361.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:21.959Z,1516424361.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:22.359Z,1516424362.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:22.752Z,1516424362.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:23.158Z,1516424363.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:23.567Z,1516424363.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:23.957Z,1516424363.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:24.358Z,1516424364.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:24.758Z,1516424364.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:25.155Z,1516424365.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:25.202Z,1516424365.202 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T04:59:25.571Z,1516424365.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:25.971Z,1516424365.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:26.360Z,1516424366.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:26.764Z,1516424366.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:27.163Z,1516424367.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:27.563Z,1516424367.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:27.967Z,1516424367.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:28.369Z,1516424368.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:28.771Z,1516424368.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:29.170Z,1516424369.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:29.567Z,1516424369.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:29.966Z,1516424369.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:30.374Z,1516424370.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:30.776Z,1516424370.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:31.155Z,1516424371.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:31.557Z,1516424371.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:31.973Z,1516424371.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:32.356Z,1516424372.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:32.763Z,1516424372.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:33.161Z,1516424373.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:33.559Z,1516424373.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:33.959Z,1516424373.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:34.359Z,1516424374.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:34.757Z,1516424374.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:35.175Z,1516424375.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:35.575Z,1516424375.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:35.973Z,1516424375.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:36.365Z,1516424376.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:36.760Z,1516424376.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:37.163Z,1516424377.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:37.559Z,1516424377.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:37.961Z,1516424377.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:38.361Z,1516424378.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:38.767Z,1516424378.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:39.167Z,1516424379.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:39.569Z,1516424379.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:39.972Z,1516424379.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:40.370Z,1516424380.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:40.771Z,1516424380.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:41.163Z,1516424381.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:41.569Z,1516424381.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:41.969Z,1516424381.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:42.374Z,1516424382.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:42.756Z,1516424382.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:43.165Z,1516424383.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:43.557Z,1516424383.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:43.963Z,1516424383.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:44.355Z,1516424384.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:44.761Z,1516424384.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:44.775Z,1516424384.775 [PNI_TCM](ERROR): CRC does not match. Expected:0x14237 got:0x9742
2018-01-20T04:59:45.157Z,1516424385.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:45.559Z,1516424385.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:45.960Z,1516424385.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:46.365Z,1516424386.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:46.762Z,1516424386.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:47.163Z,1516424387.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:47.566Z,1516424387.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:47.959Z,1516424387.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:48.362Z,1516424388.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:48.767Z,1516424388.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:49.164Z,1516424389.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:49.564Z,1516424389.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:49.965Z,1516424389.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:50.339Z,1516424390.339 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-01-20T04:59:50.413Z,1516424390.413 [NAL9602](FAULT): received: 
+CSQ:0

OK62, 2, 0, 0, 0

OK
2018-01-20T04:59:50.413Z,1516424390.413 [NAL9602] Data Fault, FailCount= 5
2018-01-20T04:59:50.413Z,1516424390.413 [NAL9602](ERROR): Data Fault
2018-01-20T04:59:50.430Z,1516424390.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:50.504Z,1516424390.504 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T04:59:50.504Z,1516424390.504 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-20T04:59:50.742Z,1516424390.742 [NAL9602](INFO): Powering down
2018-01-20T04:59:50.759Z,1516424390.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:50.826Z,1516424390.826 [CBIT](INFO): Critical error at 20180120T045950
2018-01-20T04:59:51.155Z,1516424391.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:51.557Z,1516424391.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:51.563Z,1516424391.563 [PNI_TCM](ERROR): CRC does not match. Expected:0x11506 got:0x16480
2018-01-20T04:59:51.960Z,1516424391.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:51.996Z,1516424391.996 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T04:59:51.996Z,1516424391.996 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 61
2018-01-20T04:59:51.996Z,1516424391.996 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T04:59:52.008Z,1516424392.008 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T04:59:52.354Z,1516424392.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:52.409Z,1516424392.409 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T04:59:52.409Z,1516424392.409 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 61
2018-01-20T04:59:52.754Z,1516424392.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:52.796Z,1516424392.796 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T04:59:52.801Z,1516424392.801 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T04:59:52.801Z,1516424392.801 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T04:59:53.164Z,1516424393.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:53.563Z,1516424393.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:53.962Z,1516424393.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:54.358Z,1516424394.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:54.758Z,1516424394.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:55.166Z,1516424395.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:55.566Z,1516424395.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:55.953Z,1516424395.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:56.368Z,1516424396.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:56.767Z,1516424396.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:57.163Z,1516424397.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:57.568Z,1516424397.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:57.968Z,1516424397.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:58.366Z,1516424398.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:58.762Z,1516424398.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:59.165Z,1516424399.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:59.572Z,1516424399.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T04:59:59.974Z,1516424399.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:00.365Z,1516424400.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:00.764Z,1516424400.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:01.169Z,1516424401.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:04.432Z,1516424404.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:04.547Z,1516424404.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:04.936Z,1516424404.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:05.338Z,1516424405.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:05.731Z,1516424405.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:06.131Z,1516424406.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:06.530Z,1516424406.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:06.931Z,1516424406.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:07.329Z,1516424407.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:07.737Z,1516424407.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:08.138Z,1516424408.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:08.530Z,1516424408.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:08.934Z,1516424408.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:09.338Z,1516424409.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:09.730Z,1516424409.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:10.134Z,1516424410.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:10.538Z,1516424410.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:10.930Z,1516424410.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:11.334Z,1516424411.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:11.731Z,1516424411.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:12.130Z,1516424412.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:12.534Z,1516424412.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:12.924Z,1516424412.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:13.330Z,1516424413.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:13.734Z,1516424413.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:14.138Z,1516424414.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:14.530Z,1516424414.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:14.922Z,1516424414.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:15.334Z,1516424415.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:15.730Z,1516424415.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:16.122Z,1516424416.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:16.538Z,1516424416.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:16.930Z,1516424416.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:17.335Z,1516424417.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:17.723Z,1516424417.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:18.130Z,1516424418.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:18.533Z,1516424418.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:18.923Z,1516424418.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:19.330Z,1516424419.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:19.738Z,1516424419.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:20.124Z,1516424420.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:20.530Z,1516424420.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:20.938Z,1516424420.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:21.338Z,1516424421.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:21.730Z,1516424421.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:22.134Z,1516424422.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:22.538Z,1516424422.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:22.930Z,1516424422.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:23.337Z,1516424423.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:23.723Z,1516424423.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:24.138Z,1516424424.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:24.526Z,1516424424.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:24.923Z,1516424424.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:25.330Z,1516424425.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:25.726Z,1516424425.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:26.130Z,1516424426.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:26.526Z,1516424426.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:26.926Z,1516424426.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:27.330Z,1516424427.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:27.726Z,1516424427.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:28.126Z,1516424428.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:28.530Z,1516424428.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:28.926Z,1516424428.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:29.324Z,1516424429.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:29.724Z,1516424429.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:30.126Z,1516424430.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:30.526Z,1516424430.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:30.930Z,1516424430.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:31.334Z,1516424431.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:31.734Z,1516424431.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:32.135Z,1516424432.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:32.533Z,1516424432.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:32.933Z,1516424432.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:33.330Z,1516424433.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:33.730Z,1516424433.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:34.135Z,1516424434.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:34.535Z,1516424434.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:34.933Z,1516424434.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:35.335Z,1516424435.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:35.735Z,1516424435.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:36.135Z,1516424436.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:36.536Z,1516424436.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:36.934Z,1516424436.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:37.331Z,1516424437.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:37.741Z,1516424437.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:38.175Z,1516424438.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:38.531Z,1516424438.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:38.940Z,1516424438.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:39.339Z,1516424439.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:39.726Z,1516424439.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:40.126Z,1516424440.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:40.526Z,1516424440.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:40.926Z,1516424440.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:41.326Z,1516424441.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:41.724Z,1516424441.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:42.126Z,1516424442.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:42.530Z,1516424442.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:42.927Z,1516424442.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:43.334Z,1516424443.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:43.734Z,1516424443.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:44.135Z,1516424444.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:44.533Z,1516424444.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:44.933Z,1516424444.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:45.333Z,1516424445.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:45.733Z,1516424445.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:46.130Z,1516424446.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:46.534Z,1516424446.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:46.930Z,1516424446.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:47.334Z,1516424447.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:47.731Z,1516424447.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:48.133Z,1516424448.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:48.537Z,1516424448.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:48.931Z,1516424448.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:49.334Z,1516424449.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:49.738Z,1516424449.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:50.131Z,1516424450.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:50.533Z,1516424450.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:50.938Z,1516424450.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:51.338Z,1516424451.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:51.730Z,1516424451.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:52.138Z,1516424452.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:52.531Z,1516424452.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:52.933Z,1516424452.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:53.343Z,1516424453.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:53.731Z,1516424453.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:54.133Z,1516424454.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:54.538Z,1516424454.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:54.934Z,1516424454.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:55.333Z,1516424455.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:55.737Z,1516424455.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:56.131Z,1516424456.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:56.533Z,1516424456.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:56.937Z,1516424456.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:57.338Z,1516424457.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:57.734Z,1516424457.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:58.137Z,1516424458.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:58.538Z,1516424458.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:58.934Z,1516424458.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:59.338Z,1516424459.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:00:59.724Z,1516424459.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:00.137Z,1516424460.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:00.538Z,1516424460.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:00.924Z,1516424460.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:01.330Z,1516424461.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:04.607Z,1516424464.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:04.727Z,1516424464.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:05.118Z,1516424465.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:05.511Z,1516424465.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:05.910Z,1516424465.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:06.311Z,1516424466.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:06.710Z,1516424466.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:07.110Z,1516424467.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:07.513Z,1516424467.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:07.913Z,1516424467.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:08.310Z,1516424468.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:08.719Z,1516424468.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:09.117Z,1516424469.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:09.517Z,1516424469.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:09.910Z,1516424469.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:10.310Z,1516424470.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:10.710Z,1516424470.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:11.114Z,1516424471.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:11.517Z,1516424471.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:11.918Z,1516424471.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:12.317Z,1516424472.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:12.717Z,1516424472.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:13.106Z,1516424473.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:13.514Z,1516424473.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:13.914Z,1516424473.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:14.310Z,1516424474.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:14.714Z,1516424474.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:15.114Z,1516424475.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:15.517Z,1516424475.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:15.909Z,1516424475.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:16.314Z,1516424476.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:16.710Z,1516424476.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:17.114Z,1516424477.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:17.518Z,1516424477.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:17.906Z,1516424477.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:18.314Z,1516424478.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:18.718Z,1516424478.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:19.110Z,1516424479.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:19.513Z,1516424479.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:19.913Z,1516424479.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:20.310Z,1516424480.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:20.710Z,1516424480.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:21.113Z,1516424481.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:21.510Z,1516424481.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:21.914Z,1516424481.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:22.313Z,1516424482.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:22.710Z,1516424482.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:23.113Z,1516424483.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:23.518Z,1516424483.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:23.910Z,1516424483.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:24.313Z,1516424484.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:24.718Z,1516424484.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:25.111Z,1516424485.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:25.514Z,1516424485.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:25.918Z,1516424485.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:26.314Z,1516424486.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:26.714Z,1516424486.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:27.113Z,1516424487.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:27.510Z,1516424487.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:27.910Z,1516424487.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:28.313Z,1516424488.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:28.710Z,1516424488.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:29.114Z,1516424489.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:29.518Z,1516424489.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:29.910Z,1516424489.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:30.310Z,1516424490.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:30.713Z,1516424490.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:31.102Z,1516424491.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:31.502Z,1516424491.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:31.910Z,1516424491.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:32.319Z,1516424492.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:32.707Z,1516424492.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:33.104Z,1516424493.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:33.507Z,1516424493.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:33.908Z,1516424493.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:34.313Z,1516424494.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:34.709Z,1516424494.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:35.116Z,1516424495.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:35.512Z,1516424495.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:35.916Z,1516424495.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:36.319Z,1516424496.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:36.706Z,1516424496.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:37.109Z,1516424497.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:37.514Z,1516424497.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:37.910Z,1516424497.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:38.310Z,1516424498.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:38.713Z,1516424498.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:39.106Z,1516424499.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:39.510Z,1516424499.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:39.913Z,1516424499.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:40.316Z,1516424500.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:40.715Z,1516424500.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:41.107Z,1516424501.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:41.505Z,1516424501.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:41.919Z,1516424501.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:42.318Z,1516424502.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:42.712Z,1516424502.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:43.108Z,1516424503.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:43.507Z,1516424503.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:43.905Z,1516424503.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:44.317Z,1516424504.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:44.718Z,1516424504.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:45.112Z,1516424505.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:45.508Z,1516424505.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:45.908Z,1516424505.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:46.308Z,1516424506.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:46.720Z,1516424506.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:47.112Z,1516424507.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:47.511Z,1516424507.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:47.915Z,1516424507.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:48.310Z,1516424508.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:48.711Z,1516424508.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:49.110Z,1516424509.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:49.514Z,1516424509.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:49.910Z,1516424509.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:50.313Z,1516424510.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:50.717Z,1516424510.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:50.747Z,1516424510.747 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T05:01:50.747Z,1516424510.747 [NAL9602] No Fault, FailCount= 5
2018-01-20T05:01:51.086Z,1516424511.086 [NAL9602](INFO): Powering up NAL9602
2018-01-20T05:01:51.119Z,1516424511.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:51.515Z,1516424511.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:51.910Z,1516424511.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:52.310Z,1516424512.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:52.722Z,1516424512.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:53.115Z,1516424513.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:53.519Z,1516424513.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:53.919Z,1516424513.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:54.310Z,1516424514.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:54.704Z,1516424514.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:55.119Z,1516424515.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:55.514Z,1516424515.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:55.900Z,1516424515.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:56.310Z,1516424516.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:56.710Z,1516424516.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:57.104Z,1516424517.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:57.507Z,1516424517.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:57.907Z,1516424517.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:58.307Z,1516424518.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:58.715Z,1516424518.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:59.112Z,1516424519.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:59.512Z,1516424519.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:01:59.916Z,1516424519.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:00.316Z,1516424520.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:00.711Z,1516424520.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:01.119Z,1516424521.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:01.522Z,1516424521.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:04.773Z,1516424524.773 [NAL9602](INFO): NAL9602 initialized
2018-01-20T05:02:04.791Z,1516424524.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:04.925Z,1516424524.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:05.268Z,1516424525.268 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-20T05:02:05.269Z,1516424525.269 [NAL9602] Data Fault, FailCount= 1
2018-01-20T05:02:05.269Z,1516424525.269 [NAL9602](ERROR): Data Fault
2018-01-20T05:02:05.287Z,1516424525.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:05.346Z,1516424525.346 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-20T05:02:05.670Z,1516424525.670 [NAL9602](INFO): Powering down
2018-01-20T05:02:05.688Z,1516424525.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:06.082Z,1516424526.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:06.484Z,1516424526.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:06.537Z,1516424526.537 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-20T05:02:06.537Z,1516424526.537 [NAL9602] No Fault, FailCount= 1
2018-01-20T05:02:06.886Z,1516424526.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:07.287Z,1516424527.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:07.690Z,1516424527.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:08.082Z,1516424528.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:08.482Z,1516424528.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:08.887Z,1516424528.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:09.272Z,1516424529.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:09.694Z,1516424529.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:10.075Z,1516424530.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:10.475Z,1516424530.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:10.887Z,1516424530.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:11.286Z,1516424531.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:11.672Z,1516424531.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:12.082Z,1516424532.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:12.486Z,1516424532.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:12.875Z,1516424532.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:13.298Z,1516424533.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:13.682Z,1516424533.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:14.075Z,1516424534.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:14.491Z,1516424534.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:14.882Z,1516424534.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:15.272Z,1516424535.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:15.682Z,1516424535.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:16.082Z,1516424536.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:16.490Z,1516424536.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:16.891Z,1516424536.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:17.291Z,1516424537.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:17.676Z,1516424537.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:18.082Z,1516424538.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:18.482Z,1516424538.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:18.875Z,1516424538.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:19.279Z,1516424539.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:19.691Z,1516424539.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:20.075Z,1516424540.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:20.491Z,1516424540.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:20.879Z,1516424540.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:21.275Z,1516424541.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:21.679Z,1516424541.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:22.079Z,1516424542.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:22.475Z,1516424542.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:22.891Z,1516424542.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:23.279Z,1516424543.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:23.675Z,1516424543.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:24.079Z,1516424544.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:24.479Z,1516424544.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:24.892Z,1516424544.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:25.279Z,1516424545.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:25.696Z,1516424545.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:26.079Z,1516424546.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:26.484Z,1516424546.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:26.896Z,1516424546.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:27.281Z,1516424547.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:27.674Z,1516424547.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:28.084Z,1516424548.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:28.475Z,1516424548.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:28.876Z,1516424548.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:29.284Z,1516424549.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:29.683Z,1516424549.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:30.083Z,1516424550.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:30.483Z,1516424550.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:30.879Z,1516424550.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:31.279Z,1516424551.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:31.683Z,1516424551.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:32.082Z,1516424552.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:32.482Z,1516424552.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:32.883Z,1516424552.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:33.283Z,1516424553.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:33.684Z,1516424553.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:34.081Z,1516424554.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:34.491Z,1516424554.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:34.872Z,1516424554.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:35.282Z,1516424555.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:35.674Z,1516424555.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:36.058Z,1516424556.058 [NAL9602](INFO): Powering up NAL9602
2018-01-20T05:02:36.076Z,1516424556.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:36.482Z,1516424556.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:36.879Z,1516424556.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:37.276Z,1516424557.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:37.683Z,1516424557.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:38.075Z,1516424558.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:38.474Z,1516424558.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:38.883Z,1516424558.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:39.279Z,1516424559.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:39.675Z,1516424559.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:40.079Z,1516424560.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:40.479Z,1516424560.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:40.879Z,1516424560.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:41.283Z,1516424561.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:41.687Z,1516424561.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:42.075Z,1516424562.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:42.499Z,1516424562.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:42.803Z,1516424562.803 [CommandLine](IMPORTANT): got command report touch acoustic_receive_time
2018-01-20T05:02:42.879Z,1516424562.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:43.274Z,1516424563.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:43.679Z,1516424563.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:44.082Z,1516424564.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:44.482Z,1516424564.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:44.879Z,1516424564.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:45.283Z,1516424565.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:45.686Z,1516424565.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:46.083Z,1516424566.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:46.486Z,1516424566.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:46.871Z,1516424566.871 [NAL9602](INFO): NAL9602 initialized
2018-01-20T05:02:46.888Z,1516424566.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:47.292Z,1516424567.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:47.694Z,1516424567.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:48.094Z,1516424568.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:48.499Z,1516424568.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:48.875Z,1516424568.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:49.275Z,1516424569.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:49.683Z,1516424569.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:50.094Z,1516424570.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:50.492Z,1516424570.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:50.901Z,1516424570.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:51.275Z,1516424571.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:51.673Z,1516424571.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:52.079Z,1516424572.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:52.475Z,1516424572.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:52.883Z,1516424572.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:52.913Z,1516424572.913 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T05:02:52.913Z,1516424572.913 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 62
2018-01-20T05:02:52.914Z,1516424572.914 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T05:02:52.926Z,1516424572.926 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T05:02:53.279Z,1516424573.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:53.332Z,1516424573.332 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T05:02:53.333Z,1516424573.333 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 62
2018-01-20T05:02:53.679Z,1516424573.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:53.727Z,1516424573.727 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T05:02:53.727Z,1516424573.727 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T05:02:53.727Z,1516424573.727 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T05:02:54.083Z,1516424574.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:54.483Z,1516424574.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:54.898Z,1516424574.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:55.298Z,1516424575.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:55.697Z,1516424575.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:56.098Z,1516424576.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:56.479Z,1516424576.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:56.887Z,1516424576.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:57.288Z,1516424577.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:57.680Z,1516424577.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:58.083Z,1516424578.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:58.488Z,1516424578.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:58.886Z,1516424578.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:59.282Z,1516424579.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:02:59.675Z,1516424579.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:00.091Z,1516424580.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:00.497Z,1516424580.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:00.902Z,1516424580.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:01.304Z,1516424581.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:01.680Z,1516424581.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:03.566Z,1516424583.566 [CommandLine](IMPORTANT): got command ! echo "ATR1" > /dev/ttyB3
2018-01-20T05:03:05.051Z,1516424585.051 [DAT](INFO): transmitted an acoustic signal
2018-01-20T05:03:05.053Z,1516424585.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:05.198Z,1516424585.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:05.590Z,1516424585.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:05.990Z,1516424585.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:06.374Z,1516424586.374 [DAT](INFO): transmitted an acoustic signal
2018-01-20T05:03:06.375Z,1516424586.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:06.778Z,1516424586.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:07.175Z,1516424587.175 [DAT](INFO): received an acoustic signal
2018-01-20T05:03:07.185Z,1516424587.185 [DAT](FAULT): unknown deviceResponse_: Bearing  61,  -2 (Remote)

2018-01-20T05:03:07.185Z,1516424587.185 [DAT] Communications Fault, FailCount= 1
2018-01-20T05:03:07.185Z,1516424587.185 [DAT](ERROR): Communications Fault
2018-01-20T05:03:07.186Z,1516424587.186 [DAT](FAULT): unknown deviceResponse_: Bearing  18, -13 (Local)

2018-01-20T05:03:07.188Z,1516424587.188 [DAT](DEBUG): read user prompt 3: user:3>
2018-01-20T05:03:07.274Z,1516424587.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:07.305Z,1516424587.305 [CBIT](ERROR): Communications Fault in component: DAT
2018-01-20T05:03:07.569Z,1516424587.569 [DAT](INFO): Powering down
2018-01-20T05:03:07.690Z,1516424587.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:07.982Z,1516424587.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:08.375Z,1516424588.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:08.405Z,1516424588.405 [CBIT](INFO): Clearing failed state for component DAT
2018-01-20T05:03:08.405Z,1516424588.405 [DAT] No Fault, FailCount= 0
2018-01-20T05:03:08.767Z,1516424588.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:09.171Z,1516424589.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:09.567Z,1516424589.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:09.982Z,1516424589.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:10.386Z,1516424590.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:10.773Z,1516424590.773 [DAT](INFO): Powering up
2018-01-20T05:03:10.773Z,1516424590.773 [DAT](DEBUG): Initializing DAT.
2018-01-20T05:03:10.793Z,1516424590.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:11.182Z,1516424591.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:11.567Z,1516424591.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:11.988Z,1516424591.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:12.371Z,1516424592.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:12.767Z,1516424592.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:13.163Z,1516424593.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:13.571Z,1516424593.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:13.967Z,1516424593.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:14.363Z,1516424594.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:14.761Z,1516424594.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:15.186Z,1516424595.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:15.572Z,1516424595.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:15.986Z,1516424595.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:16.386Z,1516424596.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:16.763Z,1516424596.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:17.165Z,1516424597.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:17.567Z,1516424597.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:17.963Z,1516424597.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:18.371Z,1516424598.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:18.767Z,1516424598.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:19.167Z,1516424599.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:19.571Z,1516424599.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:19.967Z,1516424599.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:20.373Z,1516424600.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:20.774Z,1516424600.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:21.178Z,1516424601.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:21.574Z,1516424601.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:21.963Z,1516424601.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:22.367Z,1516424602.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:22.775Z,1516424602.775 [DAT](DEBUG): 
Teledyne Benthos DAT-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.10.9
Jan 11 2000 01:32:14 
WARNING: battery low
Features enabled [Bearing]
CONNECT
2018-01-20T05:03:22.775Z,1516424602.775 [DAT](INFO): Got CONNECT
2018-01-20T05:03:22.807Z,1516424602.807 [DAT](INFO): entering command mode
2018-01-20T05:03:22.808Z,1516424602.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:23.167Z,1516424603.167 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-20T05:03:23.168Z,1516424603.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:23.571Z,1516424603.571 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-20T05:03:23.572Z,1516424603.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:23.978Z,1516424603.978 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-20T05:03:23.979Z,1516424603.979 [DAT](DEBUG): read user prompt 1: user:1>
2018-01-20T05:03:23.979Z,1516424603.979 [DAT](INFO): command mode acknowledged
2018-01-20T05:03:23.979Z,1516424603.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:24.368Z,1516424604.368 [DAT](INFO): setting local address to 2
2018-01-20T05:03:24.371Z,1516424604.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:24.772Z,1516424604.772 [DAT](DEBUG): checking for local address setting acknowledgment
2018-01-20T05:03:24.773Z,1516424604.773 [DAT](INFO): set local address to 2
2018-01-20T05:03:24.774Z,1516424604.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:24.834Z,1516424604.834 [Reporter](INFO): acoustic_receive_time 1516424576.000000 second since 1970/01/01T00:00:00Z
2018-01-20T05:03:25.163Z,1516424605.163 [DAT](DEBUG): read user prompt 2: user:2>
2018-01-20T05:03:25.164Z,1516424605.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:25.590Z,1516424605.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:25.986Z,1516424605.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:26.381Z,1516424606.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:26.789Z,1516424606.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:27.167Z,1516424607.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:27.571Z,1516424607.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:27.967Z,1516424607.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:28.367Z,1516424608.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:28.763Z,1516424608.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:29.163Z,1516424609.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:29.571Z,1516424609.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:29.971Z,1516424609.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:30.368Z,1516424610.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:30.782Z,1516424610.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:31.190Z,1516424611.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:31.590Z,1516424611.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:31.978Z,1516424611.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:32.369Z,1516424612.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:32.769Z,1516424612.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:33.180Z,1516424613.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:33.577Z,1516424613.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:33.980Z,1516424613.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:34.384Z,1516424614.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:34.765Z,1516424614.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:35.184Z,1516424615.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:35.311Z,1516424615.311 [CommandLine](IMPORTANT): got command ! echo "ATR1" > /dev/ttyB3
2018-01-20T05:03:35.572Z,1516424615.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:35.989Z,1516424615.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:36.390Z,1516424616.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:36.786Z,1516424616.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:37.194Z,1516424617.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:37.567Z,1516424617.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:37.979Z,1516424617.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:38.367Z,1516424618.367 [DAT](INFO): transmitted an acoustic signal
2018-01-20T05:03:38.368Z,1516424618.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:38.781Z,1516424618.781 [DAT](INFO): received an acoustic signal
2018-01-20T05:03:38.809Z,1516424618.809 [DAT](FAULT): unknown deviceResponse_: Bearing  62,   0 (Remote)

2018-01-20T05:03:38.810Z,1516424618.810 [DAT] Communications Fault, FailCount= 1
2018-01-20T05:03:38.810Z,1516424618.810 [DAT](ERROR): Communications Fault
2018-01-20T05:03:38.810Z,1516424618.810 [DAT](INFO): Read direction message, but no range.
2018-01-20T05:03:38.811Z,1516424618.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:38.881Z,1516424618.881 [CBIT](ERROR): Communications Fault in component: DAT
2018-01-20T05:03:39.169Z,1516424619.169 [DAT](INFO): Powering down
2018-01-20T05:03:39.291Z,1516424619.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:39.572Z,1516424619.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:39.968Z,1516424619.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:40.016Z,1516424620.016 [CBIT](INFO): Clearing failed state for component DAT
2018-01-20T05:03:40.016Z,1516424620.016 [DAT] No Fault, FailCount= 0
2018-01-20T05:03:40.371Z,1516424620.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:40.770Z,1516424620.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:41.174Z,1516424621.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:41.577Z,1516424621.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:41.981Z,1516424621.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:42.384Z,1516424622.384 [DAT](INFO): Powering up
2018-01-20T05:03:42.384Z,1516424622.384 [DAT](DEBUG): Initializing DAT.
2018-01-20T05:03:42.398Z,1516424622.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:42.774Z,1516424622.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:43.175Z,1516424623.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:43.573Z,1516424623.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:43.984Z,1516424623.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:44.378Z,1516424624.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:44.764Z,1516424624.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:45.178Z,1516424625.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:45.579Z,1516424625.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:45.969Z,1516424625.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:46.379Z,1516424626.379 [CommandLine](IMPORTANT): got command ! echo "ATR1" > /dev/ttyB3
2018-01-20T05:03:46.412Z,1516424626.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:46.778Z,1516424626.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:47.181Z,1516424627.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:47.605Z,1516424627.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:47.989Z,1516424627.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:48.374Z,1516424628.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:48.776Z,1516424628.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:49.176Z,1516424629.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:49.595Z,1516424629.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:49.968Z,1516424629.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:50.369Z,1516424630.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:50.764Z,1516424630.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:51.175Z,1516424631.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:51.586Z,1516424631.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:51.981Z,1516424631.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:52.394Z,1516424632.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:52.803Z,1516424632.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:53.179Z,1516424633.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:53.568Z,1516424633.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:53.977Z,1516424633.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:54.383Z,1516424634.383 [DAT](DEBUG): 
Teledyne Benthos DAT-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.10.9
Jan 11 2000 01:32:41 
WARNING: battery low
Features enabled [Bearing]
CONNECT
2018-01-20T05:03:54.383Z,1516424634.383 [DAT](INFO): Got CONNECT
2018-01-20T05:03:54.397Z,1516424634.397 [DAT](INFO): entering command mode
2018-01-20T05:03:54.398Z,1516424634.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:54.767Z,1516424634.767 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-20T05:03:54.768Z,1516424634.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:55.168Z,1516424635.168 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-20T05:03:55.169Z,1516424635.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:55.568Z,1516424635.568 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-20T05:03:55.569Z,1516424635.569 [DAT](DEBUG): read user prompt 1: user:1>
2018-01-20T05:03:55.569Z,1516424635.569 [DAT](INFO): command mode acknowledged
2018-01-20T05:03:55.570Z,1516424635.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:55.987Z,1516424635.987 [DAT](INFO): setting local address to 2
2018-01-20T05:03:55.988Z,1516424635.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:56.368Z,1516424636.368 [DAT](DEBUG): checking for local address setting acknowledgment
2018-01-20T05:03:56.369Z,1516424636.369 [DAT](INFO): set local address to 2
2018-01-20T05:03:56.370Z,1516424636.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:56.788Z,1516424636.788 [DAT](DEBUG): read user prompt 2: user:2>
2018-01-20T05:03:56.789Z,1516424636.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:57.180Z,1516424637.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:57.587Z,1516424637.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:58.009Z,1516424638.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:58.368Z,1516424638.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:58.777Z,1516424638.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:59.178Z,1516424639.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:59.576Z,1516424639.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:03:59.976Z,1516424639.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:00.379Z,1516424640.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:00.774Z,1516424640.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:01.177Z,1516424641.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:01.198Z,1516424641.198 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-20T04:59:01.0Z
2018-01-20T05:04:01.199Z,1516424641.199 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T05:04:01.199Z,1516424641.199 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-20T05:04:01.571Z,1516424641.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:02.042Z,1516424642.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:02.722Z,1516424642.722 [CommandLine](IMPORTANT): got command ! echo "ATR1" > /dev/ttyB3
2018-01-20T05:04:05.329Z,1516424645.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:05.437Z,1516424645.437 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180119T210901/Courier0200.lzma
2018-01-20T05:04:05.478Z,1516424645.478 [DAT](INFO): transmitted an acoustic signal
2018-01-20T05:04:05.479Z,1516424645.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:05.853Z,1516424645.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:06.216Z,1516424646.216 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Courier0200.lzma.bak
2018-01-20T05:04:06.216Z,1516424646.216 [DataOverHttps](INFO): SBD MOMSN=7726586
2018-01-20T05:04:06.279Z,1516424646.279 [DAT](INFO): received an acoustic signal
2018-01-20T05:04:06.302Z,1516424646.302 [DAT](FAULT): unknown deviceResponse_: Bearing  67,   0 (Remote)

2018-01-20T05:04:06.302Z,1516424646.302 [DAT] Communications Fault, FailCount= 1
2018-01-20T05:04:06.302Z,1516424646.302 [DAT](ERROR): Communications Fault
2018-01-20T05:04:06.305Z,1516424646.305 [DAT](DEBUG): read user prompt 3: user:3>
2018-01-20T05:04:06.308Z,1516424646.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:06.363Z,1516424646.363 [CBIT](ERROR): Communications Fault in component: DAT
2018-01-20T05:04:06.756Z,1516424646.756 [DAT](INFO): Powering down
2018-01-20T05:04:06.874Z,1516424646.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:07.055Z,1516424647.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:10.315Z,1516424650.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:10.378Z,1516424650.378 [CBIT](INFO): Clearing failed state for component DAT
2018-01-20T05:04:10.378Z,1516424650.378 [DAT] No Fault, FailCount= 0
2018-01-20T05:04:10.455Z,1516424650.455 [DAT](INFO): Powering up
2018-01-20T05:04:10.455Z,1516424650.455 [DAT](DEBUG): Initializing DAT.
2018-01-20T05:04:10.470Z,1516424650.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:10.829Z,1516424650.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:11.234Z,1516424651.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:11.610Z,1516424651.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:12.023Z,1516424652.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:15.289Z,1516424655.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:15.399Z,1516424655.399 [DataOverHttps](INFO): Sending 413 bytes from file Logs/20180119T210901/Express0201.lzma
2018-01-20T05:04:15.435Z,1516424655.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:15.778Z,1516424655.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:16.143Z,1516424656.143 [DataOverHttps](INFO): Moved sent file to Logs/20180119T210901/Express0201.lzma.bak
2018-01-20T05:04:16.144Z,1516424656.144 [DataOverHttps](INFO): SBD MOMSN=7726591
2018-01-20T05:04:16.201Z,1516424656.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:16.676Z,1516424656.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:16.721Z,1516424656.721 [Default:CheckIn:Read_Iridium] Stopped
2018-01-20T05:04:16.721Z,1516424656.721 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-20T05:04:16.721Z,1516424656.721 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-20T05:04:16.969Z,1516424656.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:20.726Z,1516424660.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:20.854Z,1516424660.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:21.235Z,1516424661.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:21.600Z,1516424661.600 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-20T05:04:21.638Z,1516424661.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:22.030Z,1516424662.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:22.427Z,1516424662.427 [DAT](DEBUG): 
Teledyne Benthos DAT-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.10.9
Jan 11 2000 01:33:04 
WARNING: battery low
Features enabled [Bearing]
CONNECT
2018-01-20T05:04:22.427Z,1516424662.427 [DAT](INFO): Got CONNECT
2018-01-20T05:04:22.441Z,1516424662.441 [DAT](INFO): entering command mode
2018-01-20T05:04:22.443Z,1516424662.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:22.811Z,1516424662.811 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-20T05:04:22.812Z,1516424662.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:23.221Z,1516424663.221 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-20T05:04:23.223Z,1516424663.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:23.618Z,1516424663.618 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-20T05:04:23.618Z,1516424663.618 [DAT](DEBUG): read user prompt 1: user:1>
2018-01-20T05:04:23.618Z,1516424663.618 [DAT](INFO): command mode acknowledged
2018-01-20T05:04:23.619Z,1516424663.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:24.014Z,1516424664.014 [DAT](INFO): setting local address to 2
2018-01-20T05:04:24.018Z,1516424664.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:24.421Z,1516424664.421 [DAT](DEBUG): checking for local address setting acknowledgment
2018-01-20T05:04:24.422Z,1516424664.422 [DAT](INFO): set local address to 2
2018-01-20T05:04:24.423Z,1516424664.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:24.492Z,1516424664.492 [Reporter](INFO): acoustic_receive_time 1516424704.000000 second since 1970/01/01T00:00:00Z
2018-01-20T05:04:24.822Z,1516424664.822 [DAT](DEBUG): read user prompt 2: user:2>
2018-01-20T05:04:24.823Z,1516424664.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:25.218Z,1516424665.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:25.624Z,1516424665.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:26.023Z,1516424666.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:26.425Z,1516424666.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:26.827Z,1516424666.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:27.226Z,1516424667.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:27.626Z,1516424667.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:28.027Z,1516424668.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:28.426Z,1516424668.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:28.826Z,1516424668.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:29.227Z,1516424669.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:29.628Z,1516424669.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:29.812Z,1516424669.812 [CommandLine](IMPORTANT): got command ! echo "ATR1" > /dev/ttyB3
2018-01-20T05:04:30.027Z,1516424670.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:30.426Z,1516424670.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:30.826Z,1516424670.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:31.228Z,1516424671.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:31.631Z,1516424671.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:32.026Z,1516424672.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:32.426Z,1516424672.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:32.824Z,1516424672.824 [DAT](INFO): transmitted an acoustic signal
2018-01-20T05:04:32.825Z,1516424672.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:33.223Z,1516424673.223 [DAT](INFO): received an acoustic signal
2018-01-20T05:04:33.224Z,1516424673.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:33.638Z,1516424673.638 [DAT](FAULT): unknown deviceResponse_: Bearing  61,  -2 (Remote)

2018-01-20T05:04:33.638Z,1516424673.638 [DAT] Communications Fault, FailCount= 1
2018-01-20T05:04:33.638Z,1516424673.638 [DAT](ERROR): Communications Fault
2018-01-20T05:04:33.641Z,1516424673.641 [DAT](DEBUG): read user prompt 3: user:3>
2018-01-20T05:04:33.645Z,1516424673.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:33.712Z,1516424673.712 [CBIT](ERROR): Communications Fault in component: DAT
2018-01-20T05:04:34.018Z,1516424674.018 [DAT](INFO): Powering down
2018-01-20T05:04:34.134Z,1516424674.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:34.416Z,1516424674.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:34.817Z,1516424674.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:34.862Z,1516424674.862 [CBIT](INFO): Clearing failed state for component DAT
2018-01-20T05:04:34.862Z,1516424674.862 [DAT] No Fault, FailCount= 0
2018-01-20T05:04:35.218Z,1516424675.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:35.614Z,1516424675.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:36.024Z,1516424676.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:36.422Z,1516424676.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:36.818Z,1516424676.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:37.215Z,1516424677.215 [DAT](INFO): Powering up
2018-01-20T05:04:37.215Z,1516424677.215 [DAT](DEBUG): Initializing DAT.
2018-01-20T05:04:37.233Z,1516424677.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:37.617Z,1516424677.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:38.016Z,1516424678.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:38.422Z,1516424678.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:38.822Z,1516424678.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:39.221Z,1516424679.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:39.618Z,1516424679.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:40.019Z,1516424680.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:40.418Z,1516424680.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:40.812Z,1516424680.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:41.224Z,1516424681.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:41.241Z,1516424681.241 [PNI_TCM](ERROR): CRC does not match. Expected:0x48803 got:0x7489
2018-01-20T05:04:41.622Z,1516424681.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:42.022Z,1516424682.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:42.420Z,1516424682.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:42.824Z,1516424682.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:43.219Z,1516424683.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:43.623Z,1516424683.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:44.024Z,1516424684.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:44.424Z,1516424684.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:44.823Z,1516424684.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:45.218Z,1516424685.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:45.613Z,1516424685.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:46.026Z,1516424686.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:46.427Z,1516424686.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:46.824Z,1516424686.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:47.226Z,1516424687.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:47.624Z,1516424687.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:48.031Z,1516424688.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:48.428Z,1516424688.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:48.822Z,1516424688.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:49.217Z,1516424689.217 [DAT](DEBUG): 
Teledyne Benthos DAT-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.10.9
Jan 11 2000 01:33:26 
WARNING: battery low
Features enabled [Bearing]
CONNECT
2018-01-20T05:04:49.217Z,1516424689.217 [DAT](INFO): Got CONNECT
2018-01-20T05:04:49.236Z,1516424689.236 [DAT](INFO): entering command mode
2018-01-20T05:04:49.245Z,1516424689.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:49.252Z,1516424689.252 [PNI_TCM](ERROR): CRC does not match. Expected:0x4611 got:0x1041
2018-01-20T05:04:49.632Z,1516424689.632 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-20T05:04:49.634Z,1516424689.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:50.030Z,1516424690.030 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-20T05:04:50.031Z,1516424690.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:50.431Z,1516424690.431 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-20T05:04:50.431Z,1516424690.431 [DAT](DEBUG): read user prompt 1: user:1>
2018-01-20T05:04:50.432Z,1516424690.432 [DAT](INFO): command mode acknowledged
2018-01-20T05:04:50.433Z,1516424690.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:50.822Z,1516424690.822 [DAT](INFO): setting local address to 2
2018-01-20T05:04:50.827Z,1516424690.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:51.215Z,1516424691.215 [DAT](DEBUG): checking for local address setting acknowledgment
2018-01-20T05:04:51.217Z,1516424691.217 [DAT](INFO): set local address to 2
2018-01-20T05:04:51.218Z,1516424691.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:51.270Z,1516424691.270 [Reporter](INFO): acoustic_receive_time 1516424704.000000 second since 1970/01/01T00:00:00Z
2018-01-20T05:04:51.615Z,1516424691.615 [DAT](DEBUG): read user prompt 2: user:2>
2018-01-20T05:04:51.616Z,1516424691.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:52.006Z,1516424692.006 [NAL9602](INFO): Powering down
2018-01-20T05:04:52.040Z,1516424692.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:52.419Z,1516424692.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:52.818Z,1516424692.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:53.224Z,1516424693.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:53.619Z,1516424693.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:54.016Z,1516424694.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:54.421Z,1516424694.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:54.821Z,1516424694.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:55.215Z,1516424695.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:55.623Z,1516424695.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:55.644Z,1516424695.644 [PNI_TCM](ERROR): CRC does not match. Expected:0x12974 got:0x6336
2018-01-20T05:04:56.024Z,1516424696.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:56.421Z,1516424696.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:56.823Z,1516424696.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:57.219Z,1516424697.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:57.627Z,1516424697.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:58.026Z,1516424698.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:58.420Z,1516424698.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:58.823Z,1516424698.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:59.214Z,1516424699.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:04:59.625Z,1516424699.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:00.021Z,1516424700.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:00.437Z,1516424700.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:00.819Z,1516424700.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:01.231Z,1516424701.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:01.619Z,1516424701.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:02.049Z,1516424702.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:02.423Z,1516424702.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:02.820Z,1516424702.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:02.829Z,1516424702.829 [PNI_TCM](ERROR): CRC does not match. Expected:0x60369 got:0x48156
2018-01-20T05:05:03.227Z,1516424703.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:03.623Z,1516424703.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:04.022Z,1516424704.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:04.429Z,1516424704.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:04.827Z,1516424704.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:05.216Z,1516424705.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:05.631Z,1516424705.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:06.019Z,1516424706.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:06.419Z,1516424706.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:06.831Z,1516424706.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:07.219Z,1516424707.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:07.616Z,1516424707.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:08.019Z,1516424708.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:08.419Z,1516424708.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:08.819Z,1516424708.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:09.233Z,1516424709.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:09.619Z,1516424709.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:10.031Z,1516424710.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:10.419Z,1516424710.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:10.819Z,1516424710.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:11.215Z,1516424711.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:11.623Z,1516424711.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:12.019Z,1516424712.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:12.422Z,1516424712.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:12.846Z,1516424712.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:13.224Z,1516424713.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:13.638Z,1516424713.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:14.034Z,1516424714.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:14.431Z,1516424714.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:14.828Z,1516424714.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:15.244Z,1516424715.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:15.644Z,1516424715.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:16.020Z,1516424716.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:16.452Z,1516424716.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:16.823Z,1516424716.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:17.222Z,1516424717.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:23.376Z,1516424723.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:23.559Z,1516424723.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:23.939Z,1516424723.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:24.343Z,1516424724.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:24.747Z,1516424724.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:25.141Z,1516424725.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:25.540Z,1516424725.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:25.947Z,1516424725.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:26.351Z,1516424726.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:26.748Z,1516424726.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:27.142Z,1516424727.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:27.555Z,1516424727.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:27.932Z,1516424727.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:28.344Z,1516424728.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:28.740Z,1516424728.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:29.131Z,1516424729.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:29.539Z,1516424729.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:29.935Z,1516424729.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:30.338Z,1516424730.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:30.732Z,1516424730.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:31.135Z,1516424731.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:31.535Z,1516424731.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:31.938Z,1516424731.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:32.347Z,1516424732.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:32.741Z,1516424732.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:33.142Z,1516424733.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:33.541Z,1516424733.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:33.943Z,1516424733.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:34.338Z,1516424734.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:34.741Z,1516424734.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:35.142Z,1516424735.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:35.542Z,1516424735.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:35.941Z,1516424735.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:36.339Z,1516424736.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:36.740Z,1516424736.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:37.137Z,1516424737.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:37.546Z,1516424737.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:37.939Z,1516424737.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:38.342Z,1516424738.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:38.742Z,1516424738.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:39.140Z,1516424739.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:39.541Z,1516424739.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:39.943Z,1516424739.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:40.343Z,1516424740.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:40.738Z,1516424740.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:41.142Z,1516424741.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:41.542Z,1516424741.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:41.938Z,1516424741.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:42.346Z,1516424742.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:42.732Z,1516424742.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:43.139Z,1516424743.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:43.535Z,1516424743.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:43.932Z,1516424743.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:44.335Z,1516424744.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:44.731Z,1516424744.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:45.131Z,1516424745.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:45.543Z,1516424745.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:45.946Z,1516424745.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:46.335Z,1516424746.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:46.747Z,1516424746.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:47.137Z,1516424747.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:47.537Z,1516424747.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:47.940Z,1516424747.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:48.338Z,1516424748.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:48.736Z,1516424748.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:49.141Z,1516424749.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:49.538Z,1516424749.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:49.940Z,1516424749.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:50.341Z,1516424750.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:50.742Z,1516424750.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:51.140Z,1516424751.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:51.541Z,1516424751.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:51.942Z,1516424751.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:52.336Z,1516424752.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:52.737Z,1516424752.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:53.143Z,1516424753.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:53.538Z,1516424753.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:53.941Z,1516424753.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:53.965Z,1516424753.965 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T05:05:53.965Z,1516424753.965 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 63
2018-01-20T05:05:53.965Z,1516424753.965 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T05:05:53.994Z,1516424753.994 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T05:05:54.333Z,1516424754.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:54.399Z,1516424754.399 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T05:05:54.399Z,1516424754.399 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 63
2018-01-20T05:05:54.738Z,1516424754.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:54.756Z,1516424754.756 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T05:05:54.757Z,1516424754.757 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T05:05:54.757Z,1516424754.757 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T05:05:55.151Z,1516424755.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:55.531Z,1516424755.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:55.928Z,1516424755.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:56.339Z,1516424756.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:56.731Z,1516424756.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:57.138Z,1516424757.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:57.535Z,1516424757.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:57.935Z,1516424757.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:58.331Z,1516424758.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:58.739Z,1516424758.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:59.135Z,1516424759.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:59.538Z,1516424759.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:05:59.935Z,1516424759.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:00.339Z,1516424760.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:00.732Z,1516424760.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:01.135Z,1516424761.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:01.538Z,1516424761.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:01.931Z,1516424761.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:02.341Z,1516424762.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:02.741Z,1516424762.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:03.141Z,1516424763.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:03.543Z,1516424763.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:03.948Z,1516424763.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:04.333Z,1516424764.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:04.739Z,1516424764.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:05.149Z,1516424765.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:05.549Z,1516424765.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:05.958Z,1516424765.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:06.331Z,1516424766.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:06.733Z,1516424766.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:07.139Z,1516424767.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:07.531Z,1516424767.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:07.934Z,1516424767.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:08.334Z,1516424768.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:08.738Z,1516424768.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:09.132Z,1516424769.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:09.534Z,1516424769.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:09.943Z,1516424769.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:10.336Z,1516424770.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:10.738Z,1516424770.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:11.143Z,1516424771.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:11.542Z,1516424771.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:11.943Z,1516424771.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:12.342Z,1516424772.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:12.739Z,1516424772.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:13.137Z,1516424773.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:13.545Z,1516424773.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:13.939Z,1516424773.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:14.342Z,1516424774.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:14.742Z,1516424774.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:15.139Z,1516424775.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:15.542Z,1516424775.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:15.943Z,1516424775.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:16.328Z,1516424776.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:16.746Z,1516424776.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:17.131Z,1516424777.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:17.543Z,1516424777.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:20.810Z,1516424780.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:20.927Z,1516424780.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:21.322Z,1516424781.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:21.711Z,1516424781.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:22.109Z,1516424782.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:22.517Z,1516424782.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:22.910Z,1516424782.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:23.312Z,1516424783.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:23.711Z,1516424783.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:24.110Z,1516424784.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:24.511Z,1516424784.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:24.915Z,1516424784.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:25.310Z,1516424785.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:25.711Z,1516424785.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:26.111Z,1516424786.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:26.510Z,1516424786.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:26.915Z,1516424786.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:27.315Z,1516424787.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:27.703Z,1516424787.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:28.103Z,1516424788.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:28.502Z,1516424788.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:28.903Z,1516424788.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:29.303Z,1516424789.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:29.715Z,1516424789.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:30.103Z,1516424790.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:30.503Z,1516424790.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:30.902Z,1516424790.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:31.303Z,1516424791.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:31.703Z,1516424791.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:32.106Z,1516424792.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:32.503Z,1516424792.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:32.903Z,1516424792.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:33.310Z,1516424793.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:33.704Z,1516424793.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:34.111Z,1516424794.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:34.511Z,1516424794.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:34.904Z,1516424794.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:35.307Z,1516424795.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:35.711Z,1516424795.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:36.109Z,1516424796.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:36.507Z,1516424796.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:36.911Z,1516424796.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:37.311Z,1516424797.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:37.709Z,1516424797.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:38.110Z,1516424798.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:38.510Z,1516424798.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:38.914Z,1516424798.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:39.314Z,1516424799.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:39.710Z,1516424799.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:40.110Z,1516424800.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:40.509Z,1516424800.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:40.910Z,1516424800.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:41.313Z,1516424801.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:41.717Z,1516424801.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:42.110Z,1516424802.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:42.518Z,1516424802.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:42.910Z,1516424802.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:43.306Z,1516424803.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:43.713Z,1516424803.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:44.114Z,1516424804.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:44.510Z,1516424804.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:44.913Z,1516424804.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:45.317Z,1516424805.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:45.706Z,1516424805.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:46.113Z,1516424806.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:46.513Z,1516424806.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:46.900Z,1516424806.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:47.328Z,1516424807.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:47.714Z,1516424807.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:48.103Z,1516424808.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:48.510Z,1516424808.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:48.910Z,1516424808.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:49.304Z,1516424809.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:49.707Z,1516424809.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:50.111Z,1516424810.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:50.510Z,1516424810.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:50.911Z,1516424810.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:51.311Z,1516424811.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:51.704Z,1516424811.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:52.112Z,1516424812.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:52.511Z,1516424812.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:52.910Z,1516424812.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:53.312Z,1516424813.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:53.711Z,1516424813.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:54.110Z,1516424814.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:54.515Z,1516424814.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:54.913Z,1516424814.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:55.310Z,1516424815.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:55.713Z,1516424815.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:56.113Z,1516424816.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:56.519Z,1516424816.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:56.913Z,1516424816.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:57.313Z,1516424817.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:57.711Z,1516424817.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:58.110Z,1516424818.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:58.520Z,1516424818.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:58.903Z,1516424818.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:59.313Z,1516424819.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:06:59.710Z,1516424819.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:00.116Z,1516424820.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:00.521Z,1516424820.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:00.929Z,1516424820.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:01.304Z,1516424821.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:01.704Z,1516424821.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:02.108Z,1516424822.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:02.503Z,1516424822.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:02.900Z,1516424822.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:03.307Z,1516424823.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:03.703Z,1516424823.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:04.103Z,1516424824.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:04.515Z,1516424824.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:04.915Z,1516424824.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:05.300Z,1516424825.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:05.712Z,1516424825.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:06.110Z,1516424826.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:06.510Z,1516424826.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:06.919Z,1516424826.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:07.315Z,1516424827.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:07.707Z,1516424827.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:08.110Z,1516424828.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:08.510Z,1516424828.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:08.910Z,1516424828.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:09.310Z,1516424829.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:09.718Z,1516424829.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:10.103Z,1516424830.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:10.519Z,1516424830.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:10.903Z,1516424830.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:11.303Z,1516424831.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:11.710Z,1516424831.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:12.118Z,1516424832.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:12.518Z,1516424832.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:12.907Z,1516424832.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:13.303Z,1516424833.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:13.703Z,1516424833.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:14.107Z,1516424834.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:14.503Z,1516424834.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:14.900Z,1516424834.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:15.307Z,1516424835.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:15.707Z,1516424835.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:16.114Z,1516424836.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:16.515Z,1516424836.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:16.913Z,1516424836.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:17.310Z,1516424837.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:17.712Z,1516424837.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:20.981Z,1516424840.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:21.119Z,1516424841.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:21.481Z,1516424841.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:21.878Z,1516424841.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:22.273Z,1516424842.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:22.674Z,1516424842.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:23.075Z,1516424843.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:23.475Z,1516424843.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:23.884Z,1516424843.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:24.272Z,1516424844.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:24.669Z,1516424844.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:25.083Z,1516424845.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:25.478Z,1516424845.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:25.856Z,1516424845.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:26.284Z,1516424846.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:26.290Z,1516424846.290 [PNI_TCM](ERROR): CRC does not match. Expected:0x53138 got:0x17164
2018-01-20T05:07:26.683Z,1516424846.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:27.067Z,1516424847.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:27.468Z,1516424847.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:27.871Z,1516424847.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:27.889Z,1516424847.889 [PNI_TCM](ERROR): CRC does not match. Expected:0x20346 got:0x14071
2018-01-20T05:07:28.267Z,1516424848.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:28.670Z,1516424848.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:29.071Z,1516424849.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:29.475Z,1516424849.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:29.481Z,1516424849.481 [PNI_TCM](ERROR): CRC does not match. Expected:0x25682 got:0x7489
2018-01-20T05:07:29.876Z,1516424849.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:30.277Z,1516424850.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:30.666Z,1516424850.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:31.076Z,1516424851.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:31.480Z,1516424851.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:31.872Z,1516424851.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:32.274Z,1516424852.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:32.679Z,1516424852.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:32.685Z,1516424852.685 [PNI_TCM](ERROR): CRC does not match. Expected:0x7255 got:0x29211
2018-01-20T05:07:33.069Z,1516424853.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:33.477Z,1516424853.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:33.871Z,1516424853.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:34.275Z,1516424854.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:34.684Z,1516424854.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:35.074Z,1516424855.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:35.480Z,1516424855.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:35.874Z,1516424855.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:35.890Z,1516424855.890 [PNI_TCM](ERROR): CRC does not match. Expected:0x1697 got:0x14159
2018-01-20T05:07:36.275Z,1516424856.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:36.672Z,1516424856.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:37.079Z,1516424857.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:37.464Z,1516424857.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:37.485Z,1516424857.485 [PNI_TCM](ERROR): CRC does not match. Expected:0x39498 got:0x62492
2018-01-20T05:07:37.864Z,1516424857.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:38.284Z,1516424858.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:38.664Z,1516424858.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:39.066Z,1516424859.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:39.485Z,1516424859.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:39.867Z,1516424859.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:40.266Z,1516424860.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:40.669Z,1516424860.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:41.064Z,1516424861.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:41.466Z,1516424861.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:41.869Z,1516424861.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:42.272Z,1516424862.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:42.666Z,1516424862.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:43.070Z,1516424863.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:43.472Z,1516424863.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:43.856Z,1516424863.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:44.271Z,1516424864.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:44.664Z,1516424864.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:45.068Z,1516424865.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:45.474Z,1516424865.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:45.869Z,1516424865.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:46.274Z,1516424866.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:46.675Z,1516424866.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:47.072Z,1516424867.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:47.472Z,1516424867.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:47.874Z,1516424867.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:48.272Z,1516424868.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:48.670Z,1516424868.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:49.086Z,1516424869.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:49.464Z,1516424869.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:49.875Z,1516424869.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:50.276Z,1516424870.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:50.664Z,1516424870.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:51.056Z,1516424871.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:51.475Z,1516424871.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:51.865Z,1516424871.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:52.264Z,1516424872.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:52.682Z,1516424872.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:53.064Z,1516424873.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:53.481Z,1516424873.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:53.874Z,1516424873.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:54.264Z,1516424874.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:54.666Z,1516424874.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:55.069Z,1516424875.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:55.472Z,1516424875.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:55.864Z,1516424875.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:56.274Z,1516424876.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:56.671Z,1516424876.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:57.070Z,1516424877.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:57.474Z,1516424877.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:57.873Z,1516424877.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:58.274Z,1516424878.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:58.683Z,1516424878.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:59.064Z,1516424879.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:59.482Z,1516424879.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:07:59.868Z,1516424879.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:00.264Z,1516424880.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:00.666Z,1516424880.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:01.072Z,1516424881.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:01.464Z,1516424881.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:01.865Z,1516424881.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:02.273Z,1516424882.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:02.664Z,1516424882.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:03.066Z,1516424883.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:03.468Z,1516424883.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:03.872Z,1516424883.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:04.266Z,1516424884.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:04.668Z,1516424884.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:05.072Z,1516424885.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:05.468Z,1516424885.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:05.873Z,1516424885.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:06.276Z,1516424886.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:06.668Z,1516424886.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:07.076Z,1516424887.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:07.473Z,1516424887.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:07.872Z,1516424887.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:08.276Z,1516424888.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:08.672Z,1516424888.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:09.072Z,1516424889.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:09.472Z,1516424889.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:09.872Z,1516424889.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:10.272Z,1516424890.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:10.676Z,1516424890.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:11.072Z,1516424891.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:11.472Z,1516424891.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:11.873Z,1516424891.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:12.272Z,1516424892.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:12.656Z,1516424892.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:13.068Z,1516424893.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:13.480Z,1516424893.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:13.866Z,1516424893.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:14.272Z,1516424894.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:14.672Z,1516424894.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:15.066Z,1516424895.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:15.472Z,1516424895.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:15.872Z,1516424895.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:16.266Z,1516424896.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:16.672Z,1516424896.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:17.072Z,1516424897.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:17.472Z,1516424897.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:17.869Z,1516424897.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:21.156Z,1516424901.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:21.271Z,1516424901.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:21.645Z,1516424901.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:22.056Z,1516424902.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:22.454Z,1516424902.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:22.850Z,1516424902.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:23.246Z,1516424903.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:23.646Z,1516424903.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:24.050Z,1516424904.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:24.451Z,1516424904.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:24.850Z,1516424904.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:25.250Z,1516424905.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:25.646Z,1516424905.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:26.046Z,1516424906.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:26.450Z,1516424906.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:26.855Z,1516424906.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:27.239Z,1516424907.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:27.651Z,1516424907.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:28.054Z,1516424908.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:28.454Z,1516424908.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:28.850Z,1516424908.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:29.254Z,1516424909.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:29.654Z,1516424909.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:30.046Z,1516424910.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:30.439Z,1516424910.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:30.840Z,1516424910.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:31.238Z,1516424911.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:31.654Z,1516424911.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:32.054Z,1516424912.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:32.443Z,1516424912.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:32.839Z,1516424912.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:33.238Z,1516424913.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:33.642Z,1516424913.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:34.043Z,1516424914.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:34.454Z,1516424914.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:34.859Z,1516424914.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:35.254Z,1516424915.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:35.654Z,1516424915.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:36.042Z,1516424916.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:36.454Z,1516424916.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:36.840Z,1516424916.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:37.242Z,1516424917.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:37.655Z,1516424917.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:38.054Z,1516424918.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:38.442Z,1516424918.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:38.855Z,1516424918.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:39.240Z,1516424919.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:39.643Z,1516424919.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:40.055Z,1516424920.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:40.454Z,1516424920.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:40.842Z,1516424920.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:41.243Z,1516424921.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:41.654Z,1516424921.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:42.043Z,1516424922.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:42.443Z,1516424922.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:42.840Z,1516424922.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:43.246Z,1516424923.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:43.643Z,1516424923.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:44.039Z,1516424924.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:44.442Z,1516424924.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:44.847Z,1516424924.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:45.239Z,1516424925.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:45.638Z,1516424925.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:46.047Z,1516424926.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:46.446Z,1516424926.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:46.846Z,1516424926.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:47.248Z,1516424927.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:47.643Z,1516424927.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:48.054Z,1516424928.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:48.448Z,1516424928.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:48.852Z,1516424928.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:49.249Z,1516424929.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:49.649Z,1516424929.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:50.039Z,1516424930.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:50.438Z,1516424930.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:50.846Z,1516424930.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:51.255Z,1516424931.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:51.659Z,1516424931.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:52.056Z,1516424932.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:52.444Z,1516424932.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:52.847Z,1516424932.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:53.248Z,1516424933.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:53.643Z,1516424933.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:54.047Z,1516424934.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:54.443Z,1516424934.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:54.839Z,1516424934.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:54.880Z,1516424934.880 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan
2018-01-20T05:08:54.880Z,1516424934.880 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 64
2018-01-20T05:08:54.880Z,1516424934.880 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-20T05:08:54.905Z,1516424934.905 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-20T05:08:55.239Z,1516424935.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:55.298Z,1516424935.298 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-20T05:08:55.298Z,1516424935.298 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 64
2018-01-20T05:08:55.644Z,1516424935.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:55.678Z,1516424935.678 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-20T05:08:55.679Z,1516424935.679 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-20T05:08:55.679Z,1516424935.679 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-20T05:08:56.043Z,1516424936.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:56.451Z,1516424936.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:56.837Z,1516424936.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:57.247Z,1516424937.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:57.650Z,1516424937.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:58.051Z,1516424938.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:58.450Z,1516424938.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:58.855Z,1516424938.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:59.248Z,1516424939.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:08:59.650Z,1516424939.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:00.050Z,1516424940.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:00.452Z,1516424940.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:00.850Z,1516424940.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:01.250Z,1516424941.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:01.646Z,1516424941.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:02.054Z,1516424942.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:02.450Z,1516424942.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:02.848Z,1516424942.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:03.254Z,1516424943.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:03.651Z,1516424943.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:04.054Z,1516424944.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:04.451Z,1516424944.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:04.850Z,1516424944.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:05.249Z,1516424945.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:05.655Z,1516424945.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:06.062Z,1516424946.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:06.444Z,1516424946.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:06.850Z,1516424946.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:07.259Z,1516424947.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:07.648Z,1516424947.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:08.044Z,1516424948.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:08.482Z,1516424948.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:08.843Z,1516424948.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:09.244Z,1516424949.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:09.657Z,1516424949.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:10.054Z,1516424950.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:10.453Z,1516424950.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:10.844Z,1516424950.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:11.244Z,1516424951.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:11.655Z,1516424951.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:12.046Z,1516424952.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:12.444Z,1516424952.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:12.843Z,1516424952.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:13.251Z,1516424953.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:13.647Z,1516424953.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:14.058Z,1516424954.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:14.461Z,1516424954.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:14.859Z,1516424954.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:15.254Z,1516424955.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:15.653Z,1516424955.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:16.044Z,1516424956.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:16.447Z,1516424956.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:16.850Z,1516424956.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:17.253Z,1516424957.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:17.326Z,1516424957.326 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-20T05:09:17.326Z,1516424957.326 [Default:CheckIn:C.Wait] Stopped
2018-01-20T05:09:17.326Z,1516424957.326 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-20T05:09:17.326Z,1516424957.326 [Default:CheckIn:D] Running Loop=1
2018-01-20T05:09:17.643Z,1516424957.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:17.675Z,1516424957.675 [Default:CheckIn:D] Stopped
2018-01-20T05:09:17.675Z,1516424957.675 [Default:CheckIn:E] Running Loop=1
2018-01-20T05:09:18.043Z,1516424958.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:18.079Z,1516424958.079 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 185.684147 min 
2018-01-20T05:09:18.079Z,1516424958.079 [Default:CheckIn:E] Stopped
2018-01-20T05:09:18.079Z,1516424958.079 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-20T05:09:18.079Z,1516424958.079 [Default:CheckIn] Stopped
2018-01-20T05:09:18.079Z,1516424958.079 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T05:09:18.079Z,1516424958.079 [Default:CheckIn](INFO): Running loop #19
2018-01-20T05:09:18.080Z,1516424958.080 [Default:CheckIn] Running Loop=19
2018-01-20T05:09:18.080Z,1516424958.080 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-20T05:09:18.080Z,1516424958.080 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-20T05:09:21.319Z,1516424961.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:21.414Z,1516424961.414 [NAL9602](INFO): Powering up
2018-01-20T05:09:21.432Z,1516424961.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:21.791Z,1516424961.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:22.186Z,1516424962.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:22.590Z,1516424962.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:22.988Z,1516424962.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:23.391Z,1516424963.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:23.791Z,1516424963.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:24.186Z,1516424964.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:24.586Z,1516424964.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:24.986Z,1516424964.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:25.390Z,1516424965.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:25.420Z,1516424965.420 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-20T05:09:25.786Z,1516424965.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:26.178Z,1516424966.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:26.578Z,1516424966.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:26.991Z,1516424966.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:27.394Z,1516424967.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:27.790Z,1516424967.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:28.178Z,1516424968.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:28.591Z,1516424968.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:28.991Z,1516424968.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:29.378Z,1516424969.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:29.799Z,1516424969.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:30.186Z,1516424970.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:30.579Z,1516424970.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:30.986Z,1516424970.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:31.391Z,1516424971.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:31.779Z,1516424971.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:32.201Z,1516424972.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:32.566Z,1516424972.566 [NAL9602](INFO): NAL9602 initialized
2018-01-20T05:09:32.583Z,1516424972.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:32.983Z,1516424972.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:33.407Z,1516424973.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:33.802Z,1516424973.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:34.194Z,1516424974.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:34.591Z,1516424974.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:34.991Z,1516424974.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:35.387Z,1516424975.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:35.797Z,1516424975.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:36.201Z,1516424976.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:36.602Z,1516424976.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:36.994Z,1516424976.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:37.383Z,1516424977.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:37.794Z,1516424977.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:38.194Z,1516424978.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:38.583Z,1516424978.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:38.987Z,1516424978.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:39.387Z,1516424979.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:39.783Z,1516424979.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:40.179Z,1516424980.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:40.610Z,1516424980.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:40.998Z,1516424980.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:41.398Z,1516424981.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:41.798Z,1516424981.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:42.192Z,1516424982.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:42.579Z,1516424982.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:42.986Z,1516424982.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:43.394Z,1516424983.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:43.783Z,1516424983.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:44.194Z,1516424984.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:44.588Z,1516424984.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:44.984Z,1516424984.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:45.385Z,1516424985.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:45.812Z,1516424985.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:46.192Z,1516424986.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:46.591Z,1516424986.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:47.007Z,1516424987.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:47.383Z,1516424987.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:47.779Z,1516424987.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:48.192Z,1516424988.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:48.587Z,1516424988.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:48.988Z,1516424988.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:49.391Z,1516424989.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:49.790Z,1516424989.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:50.179Z,1516424990.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:50.583Z,1516424990.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:50.998Z,1516424990.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:51.390Z,1516424991.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:51.801Z,1516424991.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:52.194Z,1516424992.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:52.579Z,1516424992.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:52.983Z,1516424992.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:53.391Z,1516424993.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:53.784Z,1516424993.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:54.188Z,1516424994.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:54.590Z,1516424994.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:54.987Z,1516424994.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:55.390Z,1516424995.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:55.786Z,1516424995.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:56.198Z,1516424996.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:56.598Z,1516424996.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:57.002Z,1516424997.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:57.402Z,1516424997.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:57.783Z,1516424997.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:58.179Z,1516424998.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:58.587Z,1516424998.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:58.983Z,1516424998.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:59.379Z,1516424999.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:09:59.780Z,1516424999.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:00.183Z,1516425000.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:00.587Z,1516425000.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:00.987Z,1516425000.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:01.398Z,1516425001.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:01.806Z,1516425001.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:02.194Z,1516425002.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:02.595Z,1516425002.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:02.986Z,1516425002.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:03.379Z,1516425003.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:03.786Z,1516425003.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:04.179Z,1516425004.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:04.579Z,1516425004.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:04.983Z,1516425004.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:05.387Z,1516425005.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:05.780Z,1516425005.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:06.183Z,1516425006.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:06.590Z,1516425006.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:06.990Z,1516425006.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:07.411Z,1516425007.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:07.802Z,1516425007.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:08.191Z,1516425008.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:08.584Z,1516425008.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:08.986Z,1516425008.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:09.392Z,1516425009.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:09.790Z,1516425009.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:10.186Z,1516425010.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:10.579Z,1516425010.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:10.986Z,1516425010.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:11.390Z,1516425011.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:11.799Z,1516425011.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:12.201Z,1516425012.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:12.602Z,1516425012.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:13.003Z,1516425013.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:13.383Z,1516425013.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:13.783Z,1516425013.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:14.179Z,1516425014.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:14.583Z,1516425014.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:14.979Z,1516425014.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:15.387Z,1516425015.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:15.784Z,1516425015.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:16.187Z,1516425016.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:16.587Z,1516425016.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:17.001Z,1516425017.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:17.402Z,1516425017.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:17.794Z,1516425017.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:18.198Z,1516425018.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:21.467Z,1516425021.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:21.596Z,1516425021.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:21.962Z,1516425021.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:22.366Z,1516425022.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:22.758Z,1516425022.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:23.166Z,1516425023.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:23.548Z,1516425023.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:23.944Z,1516425023.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:24.348Z,1516425024.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:24.748Z,1516425024.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:25.146Z,1516425025.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:25.549Z,1516425025.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:25.948Z,1516425025.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:26.348Z,1516425026.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:26.749Z,1516425026.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:27.158Z,1516425027.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:27.560Z,1516425027.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:27.961Z,1516425027.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:28.358Z,1516425028.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:28.739Z,1516425028.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:29.150Z,1516425029.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:29.552Z,1516425029.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:29.949Z,1516425029.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:30.346Z,1516425030.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:30.739Z,1516425030.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:31.137Z,1516425031.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:31.546Z,1516425031.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:31.939Z,1516425031.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:32.358Z,1516425032.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:32.762Z,1516425032.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:33.161Z,1516425033.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:33.566Z,1516425033.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:33.947Z,1516425033.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:34.347Z,1516425034.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:34.740Z,1516425034.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:35.143Z,1516425035.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:35.539Z,1516425035.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:35.938Z,1516425035.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:36.344Z,1516425036.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:36.739Z,1516425036.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:37.141Z,1516425037.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:37.558Z,1516425037.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:37.955Z,1516425037.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:38.358Z,1516425038.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:38.762Z,1516425038.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:39.150Z,1516425039.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:39.549Z,1516425039.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:39.953Z,1516425039.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:40.353Z,1516425040.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:40.746Z,1516425040.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:41.151Z,1516425041.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:41.552Z,1516425041.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:41.940Z,1516425041.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:42.356Z,1516425042.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:42.759Z,1516425042.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:43.153Z,1516425043.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:43.564Z,1516425043.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:43.958Z,1516425043.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:44.337Z,1516425044.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:44.743Z,1516425044.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:45.143Z,1516425045.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:45.547Z,1516425045.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:45.943Z,1516425045.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:46.343Z,1516425046.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:46.741Z,1516425046.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:47.143Z,1516425047.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:47.539Z,1516425047.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:47.950Z,1516425047.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:48.366Z,1516425048.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:48.750Z,1516425048.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:49.151Z,1516425049.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:49.543Z,1516425049.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:49.947Z,1516425049.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:50.340Z,1516425050.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:50.747Z,1516425050.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:51.151Z,1516425051.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:51.544Z,1516425051.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:51.951Z,1516425051.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:52.351Z,1516425052.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:52.745Z,1516425052.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:53.157Z,1516425053.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:53.558Z,1516425053.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:53.958Z,1516425053.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:54.360Z,1516425054.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:54.739Z,1516425054.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:55.137Z,1516425055.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:55.546Z,1516425055.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:55.939Z,1516425055.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:56.341Z,1516425056.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:56.746Z,1516425056.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:57.139Z,1516425057.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:57.538Z,1516425057.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:57.946Z,1516425057.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:58.359Z,1516425058.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:58.754Z,1516425058.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:59.166Z,1516425059.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:59.566Z,1516425059.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:10:59.941Z,1516425059.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:00.343Z,1516425060.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:00.743Z,1516425060.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:01.177Z,1516425061.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:01.543Z,1516425061.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:01.944Z,1516425061.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:02.338Z,1516425062.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:02.743Z,1516425062.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:03.147Z,1516425063.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:03.554Z,1516425063.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:03.966Z,1516425063.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:04.356Z,1516425064.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:04.750Z,1516425064.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:05.143Z,1516425065.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:05.179Z,1516425065.179 [CommandLine](IMPORTANT): got command restart application
2018-01-20T05:11:05.543Z,1516425065.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:05.940Z,1516425065.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:06.194Z,1516425066.194 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-20T05:11:06.194Z,1516425066.194 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:06.237Z,1516425066.237 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2018-01-20T05:11:06.237Z,1516425066.237 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:06.238Z,1516425066.238 [CommandLine](INFO): Join timeout helper Thread ID is 8796
2018-01-20T05:11:06.238Z,1516425066.238 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2018-01-20T05:11:06.238Z,1516425066.238 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:06.239Z,1516425066.239 [NavChartDb](INFO): Join timeout helper Thread ID is 8797
2018-01-20T05:11:06.257Z,1516425066.257 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-20T05:11:06.257Z,1516425066.257 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:06.277Z,1516425066.277 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2018-01-20T05:11:06.277Z,1516425066.277 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:06.277Z,1516425066.277 [Radio_Surface](INFO): Join timeout helper Thread ID is 8798
2018-01-20T05:11:06.347Z,1516425066.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:06.569Z,1516425066.569 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-20T05:11:06.569Z,1516425066.569 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:06.577Z,1516425066.577 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2018-01-20T05:11:06.577Z,1516425066.577 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:06.577Z,1516425066.577 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 8799
2018-01-20T05:11:06.605Z,1516425066.605 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-20T05:11:06.605Z,1516425066.605 [WetLabsBB2FL](INFO): Powering down
2018-01-20T05:11:06.606Z,1516425066.606 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:06.621Z,1516425066.621 [ComponentRegistry](INFO): Shutting down CTD_Seabird ThreadHandler
2018-01-20T05:11:06.621Z,1516425066.621 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:06.621Z,1516425066.621 [CTD_Seabird](INFO): Join timeout helper Thread ID is 8800
2018-01-20T05:11:06.629Z,1516425066.629 [CTD_Seabird ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-20T05:11:06.745Z,1516425066.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-20T05:11:06.790Z,1516425066.790 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-01-20T05:11:06.790Z,1516425066.790 [CTD_Seabird](INFO): Powering down
2018-01-20T05:11:06.791Z,1516425066.791 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:06.794Z,1516425066.794 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2018-01-20T05:11:06.794Z,1516425066.794 [logger ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:06.795Z,1516425066.795 [logger](INFO): Join timeout helper Thread ID is 8802
2018-01-20T05:11:06.813Z,1516425066.813 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-20T05:11:06.813Z,1516425066.813 [logger ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:06.834Z,1516425066.834 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2018-01-20T05:11:06.834Z,1516425066.834 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:06.834Z,1516425066.834 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2018-01-20T05:11:06.834Z,1516425066.834 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:06.834Z,1516425066.834 [controlThread](INFO): Join timeout helper Thread ID is 8803
2018-01-20T05:11:07.113Z,1516425067.113 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-20T05:11:07.113Z,1516425067.113 [controlThread](DEBUG): Uninitializing ControlThread
2018-01-20T05:11:07.114Z,1516425067.114 [Aanderaa_O2](INFO): Powering down
2018-01-20T05:11:07.116Z,1516425067.116 [NAL9602](INFO): Powering down
2018-01-20T05:11:07.117Z,1516425067.117 [DAT](INFO): Powering down
2018-01-20T05:11:07.237Z,1516425067.237 [PNI_TCM](INFO): Powering down
2018-01-20T05:11:07.326Z,1516425067.326 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-01-20T05:11:07.327Z,1516425067.327 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2018-01-20T05:11:07.328Z,1516425067.328 [MissionManager](INFO): Uninitializing Mission Default
2018-01-20T05:11:07.328Z,1516425067.328 [Default] Stopped
2018-01-20T05:11:07.328Z,1516425067.328 [Default](DEBUG): Aggregate::uninitialize Default
2018-01-20T05:11:07.328Z,1516425067.328 [Default:B.GoToSurface] Stopped
2018-01-20T05:11:07.328Z,1516425067.328 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-01-20T05:11:07.328Z,1516425067.328 [Default:CheckIn] Stopped
2018-01-20T05:11:07.328Z,1516425067.328 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-20T05:11:07.329Z,1516425067.329 [Default:CheckIn:Read_GPS] Stopped
2018-01-20T05:11:07.332Z,1516425067.332 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2018-01-20T05:11:07.332Z,1516425067.332 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2018-01-20T05:11:07.332Z,1516425067.332 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2018-01-20T05:11:07.333Z,1516425067.333 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2018-01-20T05:11:07.333Z,1516425067.333 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-01-20T05:11:07.333Z,1516425067.333 [BuoyancyServo](INFO): Powering down
2018-01-20T05:11:07.345Z,1516425067.345 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2018-01-20T05:11:07.345Z,1516425067.345 [ElevatorServo](INFO): Powering down
2018-01-20T05:11:07.346Z,1516425067.346 [MassServo](DEBUG): Uninitialize Mass Servo.
2018-01-20T05:11:07.346Z,1516425067.346 [MassServo](INFO): Powering down
2018-01-20T05:11:07.347Z,1516425067.347 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2018-01-20T05:11:07.347Z,1516425067.347 [RudderServo](INFO): Powering down
2018-01-20T05:11:07.348Z,1516425067.348 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2018-01-20T05:11:07.348Z,1516425067.348 [ThrusterServo](INFO): Powering down
2018-01-20T05:11:07.349Z,1516425067.349 [SBIT](DEBUG): Uninitialize SBIT Component.
2018-01-20T05:11:07.349Z,1516425067.349 [IBIT](DEBUG): Uninitialize IBIT Component.
2018-01-20T05:11:07.349Z,1516425067.349 [CBIT](DEBUG): Uninitialize CBIT Component.
2018-01-20T05:11:07.350Z,1516425067.350 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:07.442Z,1516425067.442 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:07.447Z,1516425067.447 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:07.463Z,1516425067.463 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:07.509Z,1516425067.509 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-01-20T05:11:07.568Z,1516425067.568 [logger ThreadHandler](INFO): Thread cancelled.